435 ofertas

Año de construcción: usado
Ubicación: Land-x-travel: 1000mm, y-travel: 500mm, z-travel: 700mm, number of tool slots: 24, tool cone: iso 50, quill stroke: 100mm, rotational speed: 20-3200/min, controls: phillips 432, length: 3265mm, width: 4080mm, height: 2388mm, weight: 7.3t.  X-TRAVEL: 1000MM, Y-TRAVEL: 500MM, Z-TRAVEL: 700MM, NUMBER OF TOOL SLOTS: 24, TOOL CONE: ISO 50, QUILL STROKE: 100MM, ROTATIONAL SPEED: 20-3200/MIN, CONTROLS: PHILLIPS 432, LENGTH: 3265MM, WIDTH: 4080MM, HEIGHT: 2388MM, WEIGHT: 7.3T.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 3.500 €
Ubicación: Land-weight approx.: 7200 kg<br/>dimensions (l x w x h) approx.: 3400 x 3300 x 2910 mm<br/>description: table size 900 x 550 mm, table load 800 kg, displacements x / y / z 700/630/480 mm, feed rates up to 10 m / min, rapid traverse 30 m / min, spindle intake din 69871-40 (sk 40), spindle speed 30-8000 rpm, 30 tools in warehouse, control dialog 112, blum tool break detection, knoll clamping conveyor WEIGHT APPROX.: 7200 KG
DIMENSIONS (L X W X H) APPROX.: 3400 X 3300 X 2910 MM
DESCRIPTION: TABLE SIZE 900 X 550 MM, TABLE LOAD 800 KG, DISPLACEMENTS X / Y / Z 700/630/480 MM, FEED RATES UP TO 10 M / MIN, RAPID TRAVERSE 30 M / MIN, SPINDLE INTAKE DIN 69871-40 (SK 40), SPINDLE SPEED 30-8000 RPM, 30 TOOLS IN WAREHOUSE, CONTROL DIALOG 112, BLUM TOOL BREAK DETECTION, KNOLL CLAMPING CONVEYOR
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-universal processing center maho mh 1000 s, bj 1993 tech. data x: 1000 mm
y: 600 mm
z: 800 mm w: 360 â° x 0.001 speed: 4000 1 / min
spindle: sk 50 ikz 15 bar hand wheel
chip conveyor
magazine: 51 x control: phillips 432
probe power-on hours / power on: 36 000 hours
spindle hours / spindle cuting: approx. 20 000 hours 
weight: 13 500 kg 
 UNIVERSAL PROCESSING CENTER MAHO MH 1000 S, BJ 1993 TECH. DATA X: 1000 MM Y: 600 MM Z: 800 MM W: 360 &ACIRC;&DEG; X 0.001 SPEED: 4000 1 / MIN SPINDLE: SK 50 IKZ 15 BAR HAND WHEEL CHIP CONVEYOR MAGAZINE: 51 X CONTROL: PHILLIPS 432 PROBE POWER-ON HOURS / POWER ON: 36 000 HOURS SPINDLE HOURS / SPINDLE CUTING: APPROX. 20 000 HOURS WEIGHT: 13 500 KG
Vendedor: Khajavi-Tai Maschinenvermittlung
Año de construcción: usado
Ubicación: Land-longitudinal:635 mm<br/>cross:510 mm<br/>vertical:460 mm<br/>tool changer:20 pos.<br/>max. tool length:250 mm<br/>max. tool diameter:80 mm<br/>max. tool-dia with free toolbox:130 mm<br/>rapid traverse:30/30/30 m/min<br/>dimensions of the machine ca.:2,77 xx 2,85 x 2,60 m<br/>weight of the machine ca.:4,5 t<br/>power capacity at 100 % load:9 kw<br/>power capacity at 40 % load:13 kw<br/>turning speed range:20 - 8.000 u/min<br/>tool taper:sk 40 <br/>table surface area:790 x 560 mm<br/>:600 kg<br/>groove width:14 mm<br/>number of noches:5 st.<br/>distance of t-slots:100 mm<br/>control:siemens 840 d powerline <br/><br/>cnc milling machine , 3-axis simultan electr. handwheel 40.195 hours mainswich on 16.371 hours spindle      on LONGITUDINAL:635 MM
CROSS:510 MM
VERTICAL:460 MM
TOOL CHANGER:20 POS.
MAX. TOOL LENGTH:250 MM
MAX. TOOL DIAMETER:80 MM
MAX. TOOL-DIA WITH FREE TOOLBOX:130 MM
RAPID TRAVERSE:30/30/30 M/MIN
DIMENSIONS OF THE MACHINE CA.:2,77 XX 2,85 X 2,60 M
WEIGHT OF THE MACHINE CA.:4,5 T
POWER CAPACITY AT 100 % LOAD:9 KW
POWER CAPACITY AT 40 % LOAD:13 KW
TURNING SPEED RANGE:20 - 8.000 U/MIN
TOOL TAPER:SK 40
TABLE SURFACE AREA:790 X 560 MM
:600 KG
GROOVE WIDTH:14 MM
NUMBER OF NOCHES:5 ST.
DISTANCE OF T-SLOTS:100 MM
CONTROL:SIEMENS 840 D POWERLINE

CNC MILLING MACHINE , 3-AXIS SIMULTAN ELECTR. HANDWHEEL 40.195 HOURS MAINSWICH ON 16.371 HOURS SPINDLE ON
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 15.500 €
Ubicación: Land-
type of machine tool room milling machine - universal make maho type mh 800 c built in 1992 control type cnc storage france country of origin germany delivery immediately cargo base stock technical details

x way 800 mm y-way 500 mm z-way 550 mm speed 20-5000 rpm tool holder sk 40 vertical quill stroke 80 mm feed 1-5000 mm / min rapid traverse 6000 mm / min table size 900 x 610 mm overall power demand 16 kva machine weight 4.8 tons of space approximately 2.4 x 2.85 x 2 , 1 m additional information

-with train control cnc 532 - 2 axis rotary table
 with tool changer
 -housing

engine power vorfã¼hrbereit. TYPE OF MACHINE TOOL ROOM MILLING MACHINE - UNIVERSAL MAKE MAHO TYPE MH 800 C BUILT IN 1992 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASE STOCK TECHNICAL DETAILS X WAY 800 MM Y-WAY 500 MM Z-WAY 550 MM SPEED 20-5000 RPM TOOL HOLDER SK 40 VERTICAL QUILL STROKE 80 MM FEED 1-5000 MM / MIN RAPID TRAVERSE 6000 MM / MIN TABLE SIZE 900 X 610 MM OVERALL POWER DEMAND 16 KVA MACHINE WEIGHT 4.8 TONS OF SPACE APPROXIMATELY 2.4 X 2.85 X 2 , 1 M ADDITIONAL INFORMATION -WITH TRAIN CONTROL CNC 532 - 2 AXIS ROTARY TABLE WITH TOOL CHANGER -HOUSING ENGINE POWER VORF&ATILDE;&FRAC14;HRBEREIT.
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: dimensions of the machine ca.:31 m
weight of the machine ca.:21,5 t
connected load:100 kw
amperage - max.:160 a
mode of operation:4
number of working hours:370 h
working spindel hours:112 h
fd-spindle hours:50 h
measuring probe:renishaw powerprobe 60 optical (omp 60) hsk-a 100
:blum - lasercontrol nt-h 3d
:40 bar
spray gun:1 bar
3d quickset:
tropic package:
deckel maho paket mdynamics:
control siemens for loading station:
electronic handwheel siemens 840 d:
mps machine protection control:
cleaninstation hsk:
cooling unit blow air through spindle:
chip conveyor:

klick on the video button upper above to see the machining video on youtube..gif" alt="Land-x-travel:1250 mm
y-travel:1250 mm
z-travel:1000 mm
tool magazin::120
tool taper:hsk-a 100
rotary-table:1100 mm
speed of turning table:500 u/min
set of change pallet:2 stück
a-axis:hsk-a 100
number of spindle speeds:12.000 u/min
power of spindle (motorspindle):52 / 430 kw / nm
:3000/3800 watt(heiz-/kühlleistung)
control for loadingstation:siemens(tft 8\")
dimensions of the machine ca.:31 m
weight of the machine ca.:21,5 t
connected load:100 kw
amperage - max.:160 a
mode of operation:4
number of working hours:370 h
working spindel hours:112 h
fd-spindle hours:50 h
measuring probe:renishaw powerprobe 60 optical (omp 60) hsk-a 100
:blum - lasercontrol nt-h 3d
:40 bar
spray gun:1 bar
3d quickset:
tropic package:
deckel maho paket mdynamics:
control siemens for loading station:
electronic handwheel siemens 840 d:
mps machine protection control:
cleaninstation hsk:
cooling unit blow air through spindle:
chip conveyor:

klick on the video button upper above to see the machining video on youtube." style="height: 18px;"> X-TRAVEL:1250 MM
Y-TRAVEL:1250 MM
Z-TRAVEL:1000 MM
TOOL MAGAZIN::120
TOOL TAPER:HSK-A 100
ROTARY-TABLE:1100 MM
SPEED OF TURNING TABLE:500 U/MIN
SET OF CHANGE PALLET:2 STüCK
A-AXIS:HSK-A 100
NUMBER OF SPINDLE SPEEDS:12.000 U/MIN
POWER OF SPINDLE (MOTORSPINDLE):52 / 430 KW / NM
:3000/3800 WATT(HEIZ-/KüHLLEISTUNG)
CONTROL FOR LOADINGSTATION:SIEMENS(TFT 8\")
DIMENSIONS OF THE MACHINE CA.:31 M
WEIGHT OF THE MACHINE CA.:21,5 T
CONNECTED LOAD:100 KW
AMPERAGE - MAX.:160 A
MODE OF OPERATION:4
NUMBER OF WORKING HOURS:370 H
WORKING SPINDEL HOURS:112 H
FD-SPINDLE HOURS:50 H
MEASURING PROBE:RENISHAW POWERPROBE 60 OPTICAL (OMP 60) HSK-A 100
:BLUM - LASERCONTROL NT-H 3D
:40 BAR
SPRAY GUN:1 BAR
3D QUICKSET:
TROPIC PACKAGE:
DECKEL MAHO PAKET MDYNAMICS:
CONTROL SIEMENS FOR LOADING STATION:
ELECTRONIC HANDWHEEL SIEMENS 840 D:
MPS MACHINE PROTECTION CONTROL:
CLEANINSTATION HSK:
COOLING UNIT BLOW AIR THROUGH SPINDLE:
CHIP CONVEYOR:

KLICK ON THE VIDEO BUTTON UPPER ABOVE TO SEE THE MACHINING VIDEO ON YOUTUBE.
Vendedor: VIG CNC & Werkzeugmaschinen
Año de construcción: usado
Precio: 55.000 €
Ubicación: Land-
machine type machining center - vertical make dmg mori type ecomill 600 v year 2016 control type cnc storage france origin - delivery time upon request of freight base from site technical details

x way 600 mm y way 560 mm z-way 510 mm control siemens 840 d sl 19zoll maximum speed 12,000 min / -1 power - spindle 13 / 9 kw maximum torque of 82 / 54 nm tool recording sk 40 distance spindle nose and table 120-630 mm table size 900 x 560 mm 
maximum table load 600 kg t-slots 5 working height 850 mm number of tool stations 30 pos. 
toolholder sk 40 max tool diameter 80 mm max werkzeugdurch. free neighboring box. 125 mm maximum tool length 300 mm of maximum tool weight 8.0 kg rapid traverse 30 m/min feed force 5 kn speed of max 30, 000 mm / min total power 32 kva machine weight approx. 5,0 t space requirement approx. 4,0 x 5,0 x 3,0 m accessories documentation cooling with tele n71 probe tool measuring electr. wheel washing equipment cnc - machining center vertical conveyors
 dmg mori - ecomill 600 v
 super condition only 1000 spindle hours MACHINE TYPE MACHINING CENTER - VERTICAL MAKE DMG MORI TYPE ECOMILL 600 V YEAR 2016 CONTROL TYPE CNC STORAGE FRANCE ORIGIN - DELIVERY TIME UPON REQUEST OF FREIGHT BASE FROM SITE TECHNICAL DETAILS X WAY 600 MM Y WAY 560 MM Z-WAY 510 MM CONTROL SIEMENS 840 D SL 19ZOLL MAXIMUM SPEED 12,000 MIN / -1 POWER - SPINDLE 13 / 9 KW MAXIMUM TORQUE OF 82 / 54 NM TOOL RECORDING SK 40 DISTANCE SPINDLE NOSE AND TABLE 120-630 MM TABLE SIZE 900 X 560 MM MAXIMUM TABLE LOAD 600 KG T-SLOTS 5 WORKING HEIGHT 850 MM NUMBER OF TOOL STATIONS 30 POS. TOOLHOLDER SK 40 MAX TOOL DIAMETER 80 MM MAX WERKZEUGDURCH. FREE NEIGHBORING BOX. 125 MM MAXIMUM TOOL LENGTH 300 MM OF MAXIMUM TOOL WEIGHT 8.0 KG RAPID TRAVERSE 30 M/MIN FEED FORCE 5 KN SPEED OF MAX 30, 000 MM / MIN TOTAL POWER 32 KVA MACHINE WEIGHT APPROX. 5,0 T SPACE REQUIREMENT APPROX. 4,0 X 5,0 X 3,0 M ACCESSORIES DOCUMENTATION COOLING WITH TELE N71 PROBE TOOL MEASURING ELECTR. WHEEL WASHING EQUIPMENT CNC - MACHINING CENTER VERTICAL CONVEYORS DMG MORI - ECOMILL 600 V SUPER CONDITION ONLY 1000 SPINDLE HOURS
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-for all slicer types, f.e. wabaema, jac, vlb, heristal, maho, daub, renove, kalmeyer, delta etc.\r\nbig quantities are also available\r\nplease contact us for further details. FOR ALL SLICER TYPES, F.E. WABAEMA, JAC, VLB, HERISTAL, MAHO, DAUB, RENOVE, KALMEYER, DELTA ETC.\R\NBIG QUANTITIES ARE ALSO AVAILABLE\R\NPLEASE CONTACT US FOR FURTHER DETAILS.
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-travel x / y / z 1.000 x 600 x 600 mm, spindle speed max. 10,000 rpm, tool holdertype sk40, 40 bar, external cooling, 24- atc tool changer, chip conveyor, electronic handwheel, control, manufacture heidenhain type tnc430.
de:
cnc-bearbeitungszentrum, fabr. deckel-maho, typ dmc103v, bj. 2001, ser.-nr. 28860009722, verfahrwege x/y/z 1.000 x 600 x 600 mm, spindeldrehzahl max. 10.000 u/min, werkzeugaufnahme, typ sk40, ikz, 40 bar, außenkühlung, 24-fach werkzeugwechsler, späneförderer, elektron. handrad, steuerung, fabr. heidenhain, typ tnc430, abgel. betriebsstd. 2
  TRAVEL X / Y / Z 1.000 X 600 X 600 MM, SPINDLE SPEED MAX. 10,000 RPM, TOOL HOLDERTYPE SK40, 40 BAR, EXTERNAL COOLING, 24- ATC TOOL CHANGER, CHIP CONVEYOR, ELECTRONIC HANDWHEEL, CONTROL, MANUFACTURE HEIDENHAIN TYPE TNC430. DE: CNC-BEARBEITUNGSZENTRUM, FABR. DECKEL-MAHO, TYP DMC103V, BJ. 2001, SER.-NR. 28860009722, VERFAHRWEGE X/Y/Z 1.000 X 600 X 600 MM, SPINDELDREHZAHL MAX. 10.000 U/MIN, WERKZEUGAUFNAHME, TYP SK40, IKZ, 40 BAR, AUßENKüHLUNG, 24-FACH WERKZEUGWECHSLER, SPäNEFöRDERER, ELEKTRON. HANDRAD, STEUERUNG, FABR. HEIDENHAIN, TYP TNC430, ABGEL. BETRIEBSSTD. 2
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-x-travel: 1.250 mm<br/>y-travel: 880 mm<br/>z-travel: 800 mm<br/>control: tnc 430  heidenhain<br/>main spindle::  <br/>turning speed range - main spindle: max. 12.000 min/-1<br/>power capacity - main spindel: 15 / 10 kw<br/>max. torque: 500 nm<br/>tool taper: sk 40 <br/>work table::  <br/>table surface area: 1.500 x 1.050 mm<br/>max. table load: 2.500 kg<br/>number of t-slots: 10 <br/>t-slot - width: 18 h7 mm<br/>t-slot - distance: 100 mm<br/>tool-presetter::  <br/>number of toolpositions: 60 pos.<br/>max. tool diameter: 80 mm<br/>max. tool-dia with free toolbox: 160 mm<br/>max. tool length: 315 mm<br/>max. tool weight: 8 kg<br/>max. total weight: 100 kg<br/>feeds::  <br/>rapid traverse ( x / y / z ): 15 m/min<br/>feed speeds: 10.000 mm/min<br/>total power requirement: 29 kva<br/>weight of the machine ca.: 10,0 t<br/>dimensions of the machine ca.: 7,0 x 5,0 x 3,3 m<br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>automatic tool changer:  <br/>elektr. hand wheel:  <br/>cnc - machining center vertical<br/>deckel maho - dmu 125 t<br/><br/><br/><br/><br/><br/><br/><br/> X-TRAVEL: 1.250 MM
Y-TRAVEL: 880 MM
Z-TRAVEL: 800 MM
CONTROL: TNC 430 HEIDENHAIN
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: MAX. 12.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 15 / 10 KW
MAX. TORQUE: 500 NM
TOOL TAPER: SK 40
WORK TABLE::
TABLE SURFACE AREA: 1.500 X 1.050 MM
MAX. TABLE LOAD: 2.500 KG
NUMBER OF T-SLOTS: 10
T-SLOT - WIDTH: 18 H7 MM
T-SLOT - DISTANCE: 100 MM
TOOL-PRESETTER::
NUMBER OF TOOLPOSITIONS: 60 POS.
MAX. TOOL DIAMETER: 80 MM
MAX. TOOL-DIA WITH FREE TOOLBOX: 160 MM
MAX. TOOL LENGTH: 315 MM
MAX. TOOL WEIGHT: 8 KG
MAX. TOTAL WEIGHT: 100 KG
FEEDS::
RAPID TRAVERSE ( X / Y / Z ): 15 M/MIN
FEED SPEEDS: 10.000 MM/MIN
TOTAL POWER REQUIREMENT: 29 KVA
WEIGHT OF THE MACHINE CA.: 10,0 T
DIMENSIONS OF THE MACHINE CA.: 7,0 X 5,0 X 3,3 M
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
AUTOMATIC TOOL CHANGER:
ELEKTR. HAND WHEEL:
CNC - MACHINING CENTER VERTICAL
DECKEL MAHO - DMU 125 T







Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-25 kva, machine weight 6,800 kg, travel x / y / z 700 x 600 x 500 mm, b- / c-axis, nc rotary and swivel table , table size 600 x 800 mm, spindle speed max. 10,000 rpm, tool holder sk40, 40 bar, external cooling, atc, chip conveyor, electronic hand wheel, control manufacture heidenhain type itnc 530.
de:
cnc-bearbeitungszentrum, fabr. deckel-maho, typ dmu70, bj. 2012, ser.-nr. 15435722272, anschlussleistung 25 kva, maschinengewicht 6.800 kg, verfahrwege x/y/z 700 x 600 x 500 mm, b-/c-achse, ausführung als nc-rund- und schwenktisch, tischmaß 600 x 800 mm, spindeldrehzahl, max. 10.000 u/min, werkzeugaufnahme sk40, ikz, 40 bar, außenkühlung, werkzeugwechsler, 16-fach, späneförderer, elektronisches handrad, steuerung, fabr. heidenhain, typ itnc 530, abgel. betriebsstd. spindellauf 02728, maschine ein
  25 KVA, MACHINE WEIGHT 6,800 KG, TRAVEL X / Y / Z 700 X 600 X 500 MM, B- / C-AXIS, NC ROTARY AND SWIVEL TABLE , TABLE SIZE 600 X 800 MM, SPINDLE SPEED MAX. 10,000 RPM, TOOL HOLDER SK40, 40 BAR, EXTERNAL COOLING, ATC, CHIP CONVEYOR, ELECTRONIC HAND WHEEL, CONTROL MANUFACTURE HEIDENHAIN TYPE ITNC 530. DE: CNC-BEARBEITUNGSZENTRUM, FABR. DECKEL-MAHO, TYP DMU70, BJ. 2012, SER.-NR. 15435722272, ANSCHLUSSLEISTUNG 25 KVA, MASCHINENGEWICHT 6.800 KG, VERFAHRWEGE X/Y/Z 700 X 600 X 500 MM, B-/C-ACHSE, AUSFüHRUNG ALS NC-RUND- UND SCHWENKTISCH, TISCHMAß 600 X 800 MM, SPINDELDREHZAHL, MAX. 10.000 U/MIN, WERKZEUGAUFNAHME SK40, IKZ, 40 BAR, AUßENKüHLUNG, WERKZEUGWECHSLER, 16-FACH, SPäNEFöRDERER, ELEKTRONISCHES HANDRAD, STEUERUNG, FABR. HEIDENHAIN, TYP ITNC 530, ABGEL. BETRIEBSSTD. SPINDELLAUF 02728, MASCHINE EIN
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-x-travel:1800 mm<br/>y-travel:2000 mm<br/>z-travel:1100 mm<br/>table-size:d 1700 x 1400 mm<br/>table load capacity:5000 kg<br/>tool taper:sk 50 <br/>spindle drive:30 / 20 kw<br/>turning speed range - stepless:8000 1/min<br/>numbers of positions in the tool changer:60 <br/>control:tnc 430 heidenhain <br/>weight of the machine ca.:39 t<br/>transport dimensions lxwxh:ca. 6 x 3,4 x 3,4 m<br/>space requirements approx. lxwxh:8,5 x 9,5 x 4,2 m<br/><br/>5-axis cnc universal maching center, simultaneously, nc-rotary table 1.700 x 1.400mm (360000 x 0,001° indexing), universal milling head with controlled b-axis (0,001°), mode 4 automaticaly changing  hsc - spindle with tool taper hsk 32  3d probe infrared heidenhain, chipconveyor, blum-laser, flush-gun, oilmist suction, upgraded with internal coolant supply, price without is eur 249.000,--,  approx. 88.500h \ X-TRAVEL:1800 MM
Y-TRAVEL:2000 MM
Z-TRAVEL:1100 MM
TABLE-SIZE:D 1700 X 1400 MM
TABLE LOAD CAPACITY:5000 KG
TOOL TAPER:SK 50
SPINDLE DRIVE:30 / 20 KW
TURNING SPEED RANGE - STEPLESS:8000 1/MIN
NUMBERS OF POSITIONS IN THE TOOL CHANGER:60
CONTROL:TNC 430 HEIDENHAIN
WEIGHT OF THE MACHINE CA.:39 T
TRANSPORT DIMENSIONS LXWXH:CA. 6 X 3,4 X 3,4 M
SPACE REQUIREMENTS APPROX. LXWXH:8,5 X 9,5 X 4,2 M

5-AXIS CNC UNIVERSAL MACHING CENTER, SIMULTANEOUSLY, NC-ROTARY TABLE 1.700 X 1.400MM (360000 X 0,001° INDEXING), UNIVERSAL MILLING HEAD WITH CONTROLLED B-AXIS (0,001°), MODE 4 AUTOMATICALY CHANGING HSC - SPINDLE WITH TOOL TAPER HSK 32 3D PROBE INFRARED HEIDENHAIN, CHIPCONVEYOR, BLUM-LASER, FLUSH-GUN, OILMIST SUCTION, UPGRADED WITH INTERNAL COOLANT SUPPLY, PRICE WITHOUT IS EUR 249.000,--, APPROX. 88.500H \"MACHINE ON\", APPROX. 39.300H \"SPINDLE ON\"
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-x-travel: 1800mm, y-travel: 2000mm, z-travel: 1100mm, rotary table dimensions: 1400x1600mm, rotary speed: 8000/min, spindle cone: sk 50, spindle hours: ca. 35,000h, including various accessories.  X-TRAVEL: 1800MM, Y-TRAVEL: 2000MM, Z-TRAVEL: 1100MM, ROTARY TABLE DIMENSIONS: 1400X1600MM, ROTARY SPEED: 8000/MIN, SPINDLE CONE: SK 50, SPINDLE HOURS: CA. 35,000H, INCLUDING VARIOUS ACCESSORIES.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 750 mm<br/>y-travel: 600 mm<br/>z-travel: 520 mm<br/>control: heidenhain tnc 430 <br/>tool taper: sk 40 <br/>spindle turning speed - stepless: 15.000 u/min<br/>total power requirement:  kw<br/>weight of the machine ca.: ca 11 t<br/>dimensions of the machine ca.: 5 x 4,5 x 3,1 m<br/>5-axis machining center - equipped with:<br/>- cnc control heidenhain tnc 430 (without handwheel)<br/>- chip conveyor<br/>- 32-fold tool changer (sk 40)<br/>- preparation rotoclear<br/>- main spindle 2017 renewed, rotary union defective, still in production<br/>about 64,000 turn-on and 25,000 spindle hours<br/><br/>machine can be purchased in current condition or with / after one<br/>complete overhaul (spindle, ball screw, guides, tool changers,<br/>hoses, cooling unit - new geometry) before delivery of the machine<br/><br/><br/><br/><br/> X-TRAVEL: 750 MM
Y-TRAVEL: 600 MM
Z-TRAVEL: 520 MM
CONTROL: HEIDENHAIN TNC 430
TOOL TAPER: SK 40
SPINDLE TURNING SPEED - STEPLESS: 15.000 U/MIN
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: CA 11 T
DIMENSIONS OF THE MACHINE CA.: 5 X 4,5 X 3,1 M
5-AXIS MACHINING CENTER - EQUIPPED WITH:
- CNC CONTROL HEIDENHAIN TNC 430 (WITHOUT HANDWHEEL)
- CHIP CONVEYOR
- 32-FOLD TOOL CHANGER (SK 40)
- PREPARATION ROTOCLEAR
- MAIN SPINDLE 2017 RENEWED, ROTARY UNION DEFECTIVE, STILL IN PRODUCTION
ABOUT 64,000 TURN-ON AND 25,000 SPINDLE HOURS

MACHINE CAN BE PURCHASED IN CURRENT CONDITION OR WITH / AFTER ONE
COMPLETE OVERHAUL (SPINDLE, BALL SCREW, GUIDES, TOOL CHANGERS,
HOSES, COOLING UNIT - NEW GEOMETRY) BEFORE DELIVERY OF THE MACHINE




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-3 axis machining center manufacturer: deckel maho gildemeister
type: dmc 103 v
year of construction: 2001
control: heidenhain 426
axles: 3
procedures:
x: 1000
y: 600
z: 600

tool changer: 24 x speed: 10,000 rpm
weight: approx. 6,000 kg

accessories:

ikz 1300 l coolant tank
band filter system
elektr.handrad
chip conveyor
	    		                      
		    
the machine can be seen in schloã? holte-stukenbrock. 
 
		
errors excepted			            
 3 AXIS MACHINING CENTER MANUFACTURER: DECKEL MAHO GILDEMEISTER TYPE: DMC 103 V YEAR OF CONSTRUCTION: 2001 CONTROL: HEIDENHAIN 426 AXLES: 3 PROCEDURES: X: 1000 Y: 600 Z: 600 TOOL CHANGER: 24 X SPEED: 10,000 RPM WEIGHT: APPROX. 6,000 KG ACCESSORIES: IKZ 1300 L COOLANT TANK BAND FILTER SYSTEM ELEKTR.HANDRAD CHIP CONVEYOR THE MACHINE CAN BE SEEN IN SCHLO&ATILDE;? HOLTE-STUKENBROCK. ERRORS EXCEPTED
Vendedor: Spantech GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 710 (2x) mm<br/>y-travel: 520 mm<br/>z-travel: 520 mm<br/>rotary table: 700 x 500 mm<br/>tools changer: 2 x 32 fach/tools<br/>chip coveyor:  <br/>tool adapter: hsk 63 <br/>number of spindle speeds: 20 - 18000 u/min/rpm<br/>spindle drive: 25 kw<br/>control: heidenhain tnc 430 <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>double machining center equipped with:<br/>- 2x 5-axis nc table (each 700x500mm)<br/>- cnc control heidenhain tnc 430<br/>- 2 tool changers each 32x (hsk 63)<br/><br/>currently with table bridge (self-made) - both 5 axle tables bridged for years, <br/>can be put back into operation.<br/><br/><br/><br/><br/> X-TRAVEL: 710 (2X) MM
Y-TRAVEL: 520 MM
Z-TRAVEL: 520 MM
ROTARY TABLE: 700 X 500 MM
TOOLS CHANGER: 2 X 32 FACH/TOOLS
CHIP COVEYOR:
TOOL ADAPTER: HSK 63
NUMBER OF SPINDLE SPEEDS: 20 - 18000 U/MIN/RPM
SPINDLE DRIVE: 25 KW
CONTROL: HEIDENHAIN TNC 430
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
DOUBLE MACHINING CENTER EQUIPPED WITH:
- 2X 5-AXIS NC TABLE (EACH 700X500MM)
- CNC CONTROL HEIDENHAIN TNC 430
- 2 TOOL CHANGERS EACH 32X (HSK 63)

CURRENTLY WITH TABLE BRIDGE (SELF-MADE) - BOTH 5 AXLE TABLES BRIDGED FOR YEARS,
CAN BE PUT BACK INTO OPERATION.




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-control system:	
heidenhain	
3 axis	
travel distances :	
x: 800 mm	
y: 600 mm	
z: 600 mm	
table diameter: 650 mm	
accuracy:+/- 0.02 mm	
feed range: 15 m/min	
spindle speed: 18000 rpm	
tool holder: sk 40	
table: 1250 x 700 mm	
t-nuts: 11 / 14 mm	
machine dimensions:	
3084 x 4073 x 3035 mm	
machine weight: 7000 kg CONTROL SYSTEM: HEIDENHAIN 3 AXIS TRAVEL DISTANCES : X: 800 MM Y: 600 MM Z: 600 MM TABLE DIAMETER: 650 MM ACCURACY:+/- 0.02 MM FEED RANGE: 15 M/MIN SPINDLE SPEED: 18000 RPM TOOL HOLDER: SK 40 TABLE: 1250 X 700 MM T-NUTS: 11 / 14 MM MACHINE DIMENSIONS: 3084 X 4073 X 3035 MM MACHINE WEIGHT: 7000 KG
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-x-travel: 750 mm<br/>y-travel: 600 mm<br/>z-travel: 520 mm<br/>control: heidenhain tnc <br/>tool taper: sk 40 <br/>spindle turning speed - stepless:  u/min<br/>size of pallet: 500 x 400 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: ca 11 t<br/>dimensions of the machine ca.: 6,1 x 4,3 x 3,2 m<br/>5-axis machining center - equipped with:<br/>- cnc control heidenhain tnc<br/>- pallet changer<br/>- chip conveyor<br/>- 60-fold tool changer (sk 40)<br/><br/>about 59,000 turn-on and 34,000 spindle hours<br/><br/><br/><br/><br/><br/> X-TRAVEL: 750 MM
Y-TRAVEL: 600 MM
Z-TRAVEL: 520 MM
CONTROL: HEIDENHAIN TNC
TOOL TAPER: SK 40
SPINDLE TURNING SPEED - STEPLESS: U/MIN
SIZE OF PALLET: 500 X 400 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: CA 11 T
DIMENSIONS OF THE MACHINE CA.: 6,1 X 4,3 X 3,2 M
5-AXIS MACHINING CENTER - EQUIPPED WITH:
- CNC CONTROL HEIDENHAIN TNC
- PALLET CHANGER
- CHIP CONVEYOR
- 60-FOLD TOOL CHANGER (SK 40)

ABOUT 59,000 TURN-ON AND 34,000 SPINDLE HOURS





Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-5-axis machining center-
dmg dmu 40 mono block year of manufacture: 2008
control: heidenhain 530
spindle hours: ~ 8300 h (as of 21.11.2018)

bd7ws08tex

traverse path x-axis: 450 mm
stroke y axis: 400 mm
z axis travel: 480 mm

number of tools: 16 st
changer: plate magazine

maximum spindle speed: 24000 1/min
tool holder: hsk-a63

table diameter: 450 mm
table load: 250 kg max

facilities:

chip conveyor
probe ts 649
blum laser tool measurement
coolant tank 250 l
preparation for internal cooling

a current measurement log from feb. 2019 is available 5-AXIS MACHINING CENTER- DMG DMU 40 MONO BLOCK YEAR OF MANUFACTURE: 2008 CONTROL: HEIDENHAIN 530 SPINDLE HOURS: ~ 8300 H (AS OF 21.11.2018) BD7WS08TEX TRAVERSE PATH X-AXIS: 450 MM STROKE Y AXIS: 400 MM Z AXIS TRAVEL: 480 MM NUMBER OF TOOLS: 16 ST CHANGER: PLATE MAGAZINE MAXIMUM SPINDLE SPEED: 24000 1/MIN TOOL HOLDER: HSK-A63 TABLE DIAMETER: 450 MM TABLE LOAD: 250 KG MAX FACILITIES: CHIP CONVEYOR PROBE TS 649 BLUM LASER TOOL MEASUREMENT COOLANT TANK 250 L PREPARATION FOR INTERNAL COOLING A CURRENT MEASUREMENT LOG FROM FEB. 2019 IS AVAILABLE
Vendedor: RG-Tools GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 750 mm<br/>y-travel: 600 mm<br/>z-travel: 520 mm<br/>control: heidenhain itnc 530 <br/>tool taper: sk 40 <br/>spindle turning speed - stepless: 15.000 u/min<br/>total power requirement:  kw<br/>weight of the machine ca.: ca 11t t<br/>dimensions of the machine ca.: 5 x 4,5 x 3,1 m<br/>5-axis machining center - equipped with:<br/>- cnc control heidenhain tnc 530 (without handwheel)<br/>- internal spindle cooling<br/>- chip conveyor<br/>- 32-fold tool changer (sk 40)<br/>- preparation rotoclear<br/>- still in production<br/>about 56,000 turn-on and 25,000 spindle hours<br/><br/>machine can be purchased in current condition or with / after one<br/>complete overhaul (spindle, ball screw, guides, tool changers,<br/>hoses, cooling unit - new geometry) before delivery of the machine<br/><br/><br/><br/><br/> X-TRAVEL: 750 MM
Y-TRAVEL: 600 MM
Z-TRAVEL: 520 MM
CONTROL: HEIDENHAIN ITNC 530
TOOL TAPER: SK 40
SPINDLE TURNING SPEED - STEPLESS: 15.000 U/MIN
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: CA 11T T
DIMENSIONS OF THE MACHINE CA.: 5 X 4,5 X 3,1 M
5-AXIS MACHINING CENTER - EQUIPPED WITH:
- CNC CONTROL HEIDENHAIN TNC 530 (WITHOUT HANDWHEEL)
- INTERNAL SPINDLE COOLING
- CHIP CONVEYOR
- 32-FOLD TOOL CHANGER (SK 40)
- PREPARATION ROTOCLEAR
- STILL IN PRODUCTION
ABOUT 56,000 TURN-ON AND 25,000 SPINDLE HOURS

MACHINE CAN BE PURCHASED IN CURRENT CONDITION OR WITH / AFTER ONE
COMPLETE OVERHAUL (SPINDLE, BALL SCREW, GUIDES, TOOL CHANGERS,
HOSES, COOLING UNIT - NEW GEOMETRY) BEFORE DELIVERY OF THE MACHINE




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-cnc universal - milling & drilling machine lid maho dmu 80t

with contouring mill plus it
year of construction: 2001 traverse paths: x 880 y 630 z 630
speed range: 0-12.000 rpm infinitely variable with the following accessories:

solid angle table 1250 x 700 mm clamping surface
vertical tool changer with 32 magazine places (sk 40)
full cab with sliding door and interior light
electronic handwheel
measuring probe preparation (read head available)
mode 3
chip washing gun
integrated screw conveyors
coolant system
3-piece adjustable mounts
operating instructions CNC UNIVERSAL - MILLING & DRILLING MACHINE LID MAHO DMU 80T WITH CONTOURING MILL PLUS IT YEAR OF CONSTRUCTION: 2001 TRAVERSE PATHS: X 880 Y 630 Z 630 SPEED RANGE: 0-12.000 RPM INFINITELY VARIABLE WITH THE FOLLOWING ACCESSORIES: SOLID ANGLE TABLE 1250 X 700 MM CLAMPING SURFACE VERTICAL TOOL CHANGER WITH 32 MAGAZINE PLACES (SK 40) FULL CAB WITH SLIDING DOOR AND INTERIOR LIGHT ELECTRONIC HANDWHEEL MEASURING PROBE PREPARATION (READ HEAD AVAILABLE) MODE 3 CHIP WASHING GUN INTEGRATED SCREW CONVEYORS COOLANT SYSTEM 3-PIECE ADJUSTABLE MOUNTS OPERATING INSTRUCTIONS
Vendedor: Martin Beschle Werkzeuge & Maschinen GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 1.080 mm<br/>y-travel: 710 mm<br/>z-travel: 710 mm<br/>control: itnc530 <br/>b-axis: -91 - +12 °<br/>feed x/y/z-axis: 20 - 15.000 mm/min<br/>rapid traverse x/y/z: 30,00 m/min<br/>table surface area: 1.500 x 800 mm<br/>table load: 0,90 t<br/>number of t-slots: 11 <br/>t-slots: 14h12 <br/>t-slot - distance: 63 mm<br/>spindle turning speed - stepless: 20 - 10.000 u/min<br/>power capacity at 100 % load:  kw<br/>power capacity at 40 % load: 30,00 kw<br/>tool taper: sk40 din69871 <br/>tool magazin:: 2 x 16 <br/>tool diameter: 80 mm<br/>tool diameter with 2 vacant positions: 130 mm<br/>tool length - max.: 315 mm<br/>weight of tools max.: 8,00 kg<br/>: 14,00 sec<br/>total power requirement: 45,00 kw<br/>weight of the machine ca.: 11,50 t<br/>dimensions of the machine ca.: 7,70 x 5,00 x h3,20 m<br/>4- axis machining center with control heidenhain itnc530,<br/>coolant unit, coolant through the spindle 40bar,<br/>controlled head (b-axis -90° - +12°),<br/>probe heidenhain ts641, dust exhauster.<br/><br/><br/><br/><br/><br/> X-TRAVEL: 1.080 MM
Y-TRAVEL: 710 MM
Z-TRAVEL: 710 MM
CONTROL: ITNC530
B-AXIS: -91 - +12 °
FEED X/Y/Z-AXIS: 20 - 15.000 MM/MIN
RAPID TRAVERSE X/Y/Z: 30,00 M/MIN
TABLE SURFACE AREA: 1.500 X 800 MM
TABLE LOAD: 0,90 T
NUMBER OF T-SLOTS: 11
T-SLOTS: 14H12
T-SLOT - DISTANCE: 63 MM
SPINDLE TURNING SPEED - STEPLESS: 20 - 10.000 U/MIN
POWER CAPACITY AT 100 % LOAD: KW
POWER CAPACITY AT 40 % LOAD: 30,00 KW
TOOL TAPER: SK40 DIN69871
TOOL MAGAZIN:: 2 X 16
TOOL DIAMETER: 80 MM
TOOL DIAMETER WITH 2 VACANT POSITIONS: 130 MM
TOOL LENGTH - MAX.: 315 MM
WEIGHT OF TOOLS MAX.: 8,00 KG
: 14,00 SEC
TOTAL POWER REQUIREMENT: 45,00 KW
WEIGHT OF THE MACHINE CA.: 11,50 T
DIMENSIONS OF THE MACHINE CA.: 7,70 X 5,00 X H3,20 M
4- AXIS MACHINING CENTER WITH CONTROL HEIDENHAIN ITNC530,
COOLANT UNIT, COOLANT THROUGH THE SPINDLE 40BAR,
CONTROLLED HEAD (B-AXIS -90° - +12°),
PROBE HEIDENHAIN TS641, DUST EXHAUSTER.





Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-parameters:
type of machine: cnc 5-axis universal machine center.
manufacturer: dmg (deckel-maho).

model: dmu 50 v.
dmu 50 v
producer: dmg
chuck surface: 500 x 380 meters
x axis: 500 mm
y axis: 450 mm
axis z: 400 mm
spindle speed: 0-15000/min.
controlled axes: 5
machine weight: 5500kg PARAMETERS: TYPE OF MACHINE: CNC 5-AXIS UNIVERSAL MACHINE CENTER. MANUFACTURER: DMG (DECKEL-MAHO). MODEL: DMU 50 V. DMU 50 V PRODUCER: DMG CHUCK SURFACE: 500 X 380 METERS X AXIS: 500 MM Y AXIS: 450 MM AXIS Z: 400 MM SPINDLE SPEED: 0-15000/MIN. CONTROLLED AXES: 5 MACHINE WEIGHT: 5500KG
Vendedor: BASTA machinery
Año de construcción: usado
Precio: used machinery auction RESALE 10.500 €
Ubicación: Land-weight approx.: 2000 kg<br/>z-travel: 340 mm<br/>y-travel: 240 mm<br/>x-travel: 350 mm<br/>workpiece weight: 100 kg<br/>dimensions (l x w x h) approx.: 3800 x 3600 x 2100 mm<br/>taper: iso 40 din 69871 <br/>turning speed range: 20 - 6300 rpm<br/>rapid traverse: 5 m/min<br/>table surface area l x w : 400 x 290 mm<br/>feed range: 5000 mm/min<br/>control: siemens 810 d shop mill <br/>power capacity - spindle: 6,3 / 10 kw<br/>spindle torque: 55 / 80 nm<br/>description: deckel maho dmu 35 universal machining centre rundtisch:<br> table size: 400 x 290 mm<br> t-slots: 5x 12h7 x 50<br> centre bore: 30h6<br> turning range c-axis: 360 °<br> swivelling range b-axis: +105 / -15 °<br> input resolution: 0,01 mm<br> total power requirement: 15 kva<br> WEIGHT APPROX.: 2000 KG
Z-TRAVEL: 340 MM
Y-TRAVEL: 240 MM
X-TRAVEL: 350 MM
WORKPIECE WEIGHT: 100 KG
DIMENSIONS (L X W X H) APPROX.: 3800 X 3600 X 2100 MM
TAPER: ISO 40 DIN 69871
TURNING SPEED RANGE: 20 - 6300 RPM
RAPID TRAVERSE: 5 M/MIN
TABLE SURFACE AREA L X W : 400 X 290 MM
FEED RANGE: 5000 MM/MIN
CONTROL: SIEMENS 810 D SHOP MILL
POWER CAPACITY - SPINDLE: 6,3 / 10 KW
SPINDLE TORQUE: 55 / 80 NM
DESCRIPTION: DECKEL MAHO DMU 35 UNIVERSAL MACHINING CENTRE RUNDTISCH:
TABLE SIZE: 400 X 290 MM
T-SLOTS: 5X 12H7 X 50
CENTRE BORE: 30H6
TURNING RANGE C-AXIS: 360 °
SWIVELLING RANGE B-AXIS: +105 / -15 °
INPUT RESOLUTION: 0,01 MM
TOTAL POWER REQUIREMENT: 15 KVA
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-maho type: mh 800 e2 control: cnc 432 travel: x-axis: 800 mm y-axis: 550 mm z-axis: 500 mm spindle retainer: iso 40 quill stroke 80 mm maximum distance spindle nose to table surface 514 mm spindle speeds: 20-5000 rpm. 
horizontal milling spindle: spindle retainer: iso 40 feeds continuously variable: 1-3000 mm / min. 
rapid feed 5 / 6 m / min. 
operating voltage 400 volt spindle drive: 7, 5kw machine dimensions lxwxh): 2875 x 3100 x 2130 mm weight: approx. 4700 kg 20 x tool changer
documentation

changes and errors in the technical data and information and subject to prior sale!  MAHO TYPE: MH 800 E2 CONTROL: CNC 432 TRAVEL: X-AXIS: 800 MM Y-AXIS: 550 MM Z-AXIS: 500 MM SPINDLE RETAINER: ISO 40 QUILL STROKE 80 MM MAXIMUM DISTANCE SPINDLE NOSE TO TABLE SURFACE 514 MM SPINDLE SPEEDS: 20-5000 RPM. HORIZONTAL MILLING SPINDLE: SPINDLE RETAINER: ISO 40 FEEDS CONTINUOUSLY VARIABLE: 1-3000 MM / MIN. RAPID FEED 5 / 6 M / MIN. OPERATING VOLTAGE 400 VOLT SPINDLE DRIVE: 7, 5KW MACHINE DIMENSIONS LXWXH): 2875 X 3100 X 2130 MM WEIGHT: APPROX. 4700 KG 20 X TOOL CHANGER DOCUMENTATION CHANGES AND ERRORS IN THE TECHNICAL DATA AND INFORMATION AND SUBJECT TO PRIOR SALE!
Vendedor: EN-Tec GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 7.300 €
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 5200 x 3300 x 2910 mm<br/>description: cnc control heidenhain tnc 426<br> working range:<br> x-700 mm<br> y-550 mm<br> z-500 mm<br> table length: 900 x 550 mm<br> tool changer: 30-fold<br> tool holder milling head: sk 40, 8000 rotations/min<br> max. table load (kg) : max. 800<br> pallet changer (kg): 1200<br> space requirement: 5200 mm x 3300 mm x 2910 mm<br> machine weight: 7000 kg<br> <br> - chip conveyor<br> - direct path measuring system<br> - rinsing pistol<br> - hand wheel<br> WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 5200 X 3300 X 2910 MM
DESCRIPTION: CNC CONTROL HEIDENHAIN TNC 426
WORKING RANGE:
X-700 MM
Y-550 MM
Z-500 MM
TABLE LENGTH: 900 X 550 MM
TOOL CHANGER: 30-FOLD
TOOL HOLDER MILLING HEAD: SK 40, 8000 ROTATIONS/MIN
MAX. TABLE LOAD (KG) : MAX. 800
PALLET CHANGER (KG): 1200
SPACE REQUIREMENT: 5200 MM X 3300 MM X 2910 MM
MACHINE WEIGHT: 7000 KG

- CHIP CONVEYOR
- DIRECT PATH MEASURING SYSTEM
- RINSING PISTOL
- HAND WHEEL
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 8.995 €
Ubicación: Land-forwarding cnc tool machine maho sales only at commercial cnc tool machine maho type mh 600 e2 masch. no. 660576 cnc railway control of philips 432 driveways x: 600 mm y: 400 mm z 450 mm tischgrã¶ã?e900 x 480 mm werkzeugwechsler20 fold spindle taper iso 40 din 69871 with pull stud din 7388/ii tool clamp hydraulic spindle speed 20-4000 rpm. 
infinitely programmable feed 1-4000 mm / min. 
continuously rapid traverse x and z = 6 m / min, y = 5 m / min. 
pinolverschiebung vertikal80 mm spindelantrieb5, 5 kw netzanschluã?380 volt, 50 hz, 12 kva - solid angle table splash guard cabin as table housing with 3 folding doors swivel mechanism for the vertical milling head - v24 interface for data transmission -. 
tiltable control panel coolant system with coolant pump central oil lubrication bird 26126 operating hours
documentation FORWARDING CNC TOOL MACHINE MAHO SALES ONLY AT COMMERCIAL CNC TOOL MACHINE MAHO TYPE MH 600 E2 MASCH. NO. 660576 CNC RAILWAY CONTROL OF PHILIPS 432 DRIVEWAYS X: 600 MM Y: 400 MM Z 450 MM TISCHGR&ATILDE;&PARA;&ATILDE;?E900 X 480 MM WERKZEUGWECHSLER20 FOLD SPINDLE TAPER ISO 40 DIN 69871 WITH PULL STUD DIN 7388/II TOOL CLAMP HYDRAULIC SPINDLE SPEED 20-4000 RPM. INFINITELY PROGRAMMABLE FEED 1-4000 MM / MIN. CONTINUOUSLY RAPID TRAVERSE X AND Z = 6 M / MIN, Y = 5 M / MIN. PINOLVERSCHIEBUNG VERTIKAL80 MM SPINDELANTRIEB5, 5 KW NETZANSCHLU&ATILDE;?380 VOLT, 50 HZ, 12 KVA - SOLID ANGLE TABLE SPLASH GUARD CABIN AS TABLE HOUSING WITH 3 FOLDING DOORS SWIVEL MECHANISM FOR THE VERTICAL MILLING HEAD - V24 INTERFACE FOR DATA TRANSMISSION -. TILTABLE CONTROL PANEL COOLANT SYSTEM WITH COOLANT PUMP CENTRAL OIL LUBRICATION BIRD 26126 OPERATING HOURS DOCUMENTATION
Vendedor: EN-Tec GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 14.000 €
Ubicación: Land-weight approx.: 9100 kg<br/>dimensions (l x w x h) approx.: 3300 x 2300 x 2700 mm<br/>description: cnc control sinumerik 840 d<br> x-path 650 mm<br> y-path 500 mm<br> z-path 500 mm<br> speed range 1 - 18000 rotations/min<br> tool holder sk 40<br> tool magazine with 30 places<br> table dimensions 850 x 600 mm<br> inner coolant supply 40 bar<br> chip conveyor<br> machine weight approx. 9.1 t<br> <b>the vices are not included in the scope of delivery</b> WEIGHT APPROX.: 9100 KG
DIMENSIONS (L X W X H) APPROX.: 3300 X 2300 X 2700 MM
DESCRIPTION: CNC CONTROL SINUMERIK 840 D
X-PATH 650 MM
Y-PATH 500 MM
Z-PATH 500 MM
SPEED RANGE 1 - 18000 ROTATIONS/MIN
TOOL HOLDER SK 40
TOOL MAGAZINE WITH 30 PLACES
TABLE DIMENSIONS 850 X 600 MM
INNER COOLANT SUPPLY 40 BAR
CHIP CONVEYOR
MACHINE WEIGHT APPROX. 9.1 T
THE VICES ARE NOT INCLUDED IN THE SCOPE OF DELIVERY
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-procedures:
[x x y x z] 1250 x 880 x 800 mm
 
number of axles: 3 control: heidenhain tnc 426/430 spindle retainer: hsk a 63 table size x: 1500 mm
table size y: 1050 mm
tool changers: 30 - fold PROCEDURES: [X X Y X Z] 1250 X 880 X 800 MM NUMBER OF AXLES: 3 CONTROL: HEIDENHAIN TNC 426/430 SPINDLE RETAINER: HSK A 63 TABLE SIZE X: 1500 MM TABLE SIZE Y: 1050 MM TOOL CHANGERS: 30 - FOLD
Vendedor: Mac-Tec
Año de construcción: usado
Ubicación: Land-travel -x axis: 3000 mm<br/>travel -y axis: 560 mm<br/>travel -z axis: 710 mm<br/>control: siemens 840 d <br/>tool adaptor: sk40 <br/>automatic tool changer: 30 stk.<br/>additional equipment:<br/><br/>+ reinforced icz<br/>+ 4.axis<br/><br/>the machine is in a good condition.<br/><br/><br/><br/><br/> TRAVEL -X AXIS: 3000 MM
TRAVEL -Y AXIS: 560 MM
TRAVEL -Z AXIS: 710 MM
CONTROL: SIEMENS 840 D
TOOL ADAPTOR: SK40
AUTOMATIC TOOL CHANGER: 30 STK.
ADDITIONAL EQUIPMENT:

+ REINFORCED ICZ
+ 4.AXIS

THE MACHINE IS IN A GOOD CONDITION.




Vendedor: STEINHAND GmbH
Año de construcción: usado
Ubicación: Land-type of machine: cnc 5-axis universal machining center,.
manufacturer: dmg (deckel-maho).
model: dmu 50 v,.
control: heidenhain tnc 426, 5 axes simultaneous.
year of construction: 1999.
condition: very good,.
type of offer: used machine,
     ,.	
technical data:.
table: nc swivel rotary table Ø 500 x 380 mm,.
paths:.
x = 500 mm,.
y = 380 mm,.
z = 380 mm.
spindle speed: 20-15000 rpm,.
spindle retainer: sk 40.
spindle drive: 10.0/15.0 kw.
comment:.
24-fold tool changer.
coolant system.
el. handwheel.
weight: 4400 kg,
     ,.	
the machine is in a very good shape and ready for operation. it can be visited and demonstrated at our location.,.
     ,.
we will be pleased if you take an interest in our offer.,.
  TYPE OF MACHINE: CNC 5-AXIS UNIVERSAL MACHINING CENTER,. MANUFACTURER: DMG (DECKEL-MAHO). MODEL: DMU 50 V,. CONTROL: HEIDENHAIN TNC 426, 5 AXES SIMULTANEOUS. YEAR OF CONSTRUCTION: 1999. CONDITION: VERY GOOD,. TYPE OF OFFER: USED MACHINE, ,. TECHNICAL DATA:. TABLE: NC SWIVEL ROTARY TABLE Ø 500 X 380 MM,. PATHS:. X = 500 MM,. Y = 380 MM,. Z = 380 MM. SPINDLE SPEED: 20-15000 RPM,. SPINDLE RETAINER: SK 40. SPINDLE DRIVE: 10.0/15.0 KW. COMMENT:. 24-FOLD TOOL CHANGER. COOLANT SYSTEM. EL. HANDWHEEL. WEIGHT: 4400 KG, ,. THE MACHINE IS IN A VERY GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION.,. ,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER.,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 1.200 €
Ubicación: Land-weight approx.: 4400 kg<br/>dimensions (l x w x h) approx.: 1600 x 2300 x 2450 mm<br/>description: maho mh 800 p universal milling machine<br> - travels of x/y/z: 800 x 450 x 500 mm<br> - speed range: 40 - 2000 rpm<br> - tool holder: sk 40<br> - table size: 1100 x 650 mm<br> - table load: 800 kg<br> - quill stroke: 80 / 80 mm<br> - control system: heidenhain tnc 135<br> - connected load: 9,0 kw<br> - operating voltage: 380 v, 50 hz<br> WEIGHT APPROX.: 4400 KG
DIMENSIONS (L X W X H) APPROX.: 1600 X 2300 X 2450 MM
DESCRIPTION: MAHO MH 800 P UNIVERSAL MILLING MACHINE
- TRAVELS OF X/Y/Z: 800 X 450 X 500 MM
- SPEED RANGE: 40 - 2000 RPM
- TOOL HOLDER: SK 40
- TABLE SIZE: 1100 X 650 MM
- TABLE LOAD: 800 KG
- QUILL STROKE: 80 / 80 MM
- CONTROL SYSTEM: HEIDENHAIN TNC 135
- CONNECTED LOAD: 9,0 KW
- OPERATING VOLTAGE: 380 V, 50 HZ
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-type: dmu 60 p hi-dyn built: 2001 control: heidenhain 430 traverse path x-axis 600 mm y axis 700 mm z axis 600 mm table clamping surface d 630 mm spindle unit toolholder sk 40 30 tool changer compartment  TYPE: DMU 60 P HI-DYN BUILT: 2001 CONTROL: HEIDENHAIN 430 TRAVERSE PATH X-AXIS 600 MM Y AXIS 700 MM Z AXIS 600 MM TABLE CLAMPING SURFACE D 630 MM SPINDLE UNIT TOOLHOLDER SK 40 30 TOOL CHANGER COMPARTMENT
Vendedor: Maschinenhandel und Metallbau Werny
Año de construcción: usado
Ubicación: Land-x-travel: 800 mm<br/>y-travel: 700 mm<br/>z-travel: 600 mm<br/>control: tnc 430  heidenhain<br/>main spindle::  <br/>turning speed range - main spindle: max. 12.000 min/-1<br/>power capacity - main spindel: 15 / 10 kw<br/>max. torque: 475 nm<br/>tool taper: bt 40 <br/>nc-tilting round table::  <br/>surface area: Ø 630 mm<br/>number of t-slots: 9 <br/>t-slot - distance: 63 mm<br/>t-slot - width: 14 h7 mm<br/>max. table load: 600 kg<br/>swival range +/-: a: 45 / 30 °<br/>rotation range: c: 360 °<br/>tool-presetter::  <br/>number of toolpositions: 60 pos.<br/>tool taper: bt 40 <br/>max. tool diameter: 100 mm<br/>max. tool-dia with free toolbox: 160 mm<br/>max. tool length: 350 mm<br/>max. tool weight: 10 kg<br/>feeds::  <br/>feed speeds: 20 - 10.000 mm/min<br/>rapid traverse: 24 m/min<br/>total power requirement: 35 kva<br/>weight of the machine ca.: 9 t<br/>dimensions of the machine ca.: 6,5 x 5,0 x 2,5 m<br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>hydraulic system:  <br/>automatic tool changer: 60 pos. <br/>turning milling head:  <br/>nc-rotary swiveling table:  <br/>elektr. hand wheel:  <br/>operation mode 4:  <br/>cnc-machining center universal<br/>deckel maho - dmu 80 p<br/><br/>- 5 axis + / swivel-milling-table<br/>- schwenkkopf<br/>- without tools<br/><br/><br/><br/><br/><br/><br/> X-TRAVEL: 800 MM
Y-TRAVEL: 700 MM
Z-TRAVEL: 600 MM
CONTROL: TNC 430 HEIDENHAIN
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: MAX. 12.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 15 / 10 KW
MAX. TORQUE: 475 NM
TOOL TAPER: BT 40
NC-TILTING ROUND TABLE::
SURFACE AREA: Ø 630 MM
NUMBER OF T-SLOTS: 9
T-SLOT - DISTANCE: 63 MM
T-SLOT - WIDTH: 14 H7 MM
MAX. TABLE LOAD: 600 KG
SWIVAL RANGE +/-: A: 45 / 30 °
ROTATION RANGE: C: 360 °
TOOL-PRESETTER::
NUMBER OF TOOLPOSITIONS: 60 POS.
TOOL TAPER: BT 40
MAX. TOOL DIAMETER: 100 MM
MAX. TOOL-DIA WITH FREE TOOLBOX: 160 MM
MAX. TOOL LENGTH: 350 MM
MAX. TOOL WEIGHT: 10 KG
FEEDS::
FEED SPEEDS: 20 - 10.000 MM/MIN
RAPID TRAVERSE: 24 M/MIN
TOTAL POWER REQUIREMENT: 35 KVA
WEIGHT OF THE MACHINE CA.: 9 T
DIMENSIONS OF THE MACHINE CA.: 6,5 X 5,0 X 2,5 M
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
HYDRAULIC SYSTEM:
AUTOMATIC TOOL CHANGER: 60 POS.
TURNING MILLING HEAD:
NC-ROTARY SWIVELING TABLE:
ELEKTR. HAND WHEEL:
OPERATION MODE 4:
CNC-MACHINING CENTER UNIVERSAL
DECKEL MAHO - DMU 80 P

- 5 AXIS + / SWIVEL-MILLING-TABLE
- SCHWENKKOPF
- WITHOUT TOOLS






Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-in good technical condition and fully functional.
production in 1998.
control system: maho cnc 532.
spindle: iso 40.
table clamping surface: 900 x 600 mm.
axes: x 600 mm, y 550 mm, z 400 mm IN GOOD TECHNICAL CONDITION AND FULLY FUNCTIONAL. PRODUCTION IN 1998. CONTROL SYSTEM: MAHO CNC 532. SPINDLE: ISO 40. TABLE CLAMPING SURFACE: 900 X 600 MM. AXES: X 600 MM, Y 550 MM, Z 400 MM
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-x-travel: 800 mm<br/>y-travel: 500 mm<br/>z-travel: 550 mm<br/>control: cnc 415 <br/>spindle taper iso: 40 <br/>spindle turning speed range: 20 - 4000 u/min<br/>table-size: 1100 x 600 mm<br/>table load: 600 kg<br/>feeds -stepless-: 1 - 3000 mm/min<br/>rapid traverse: 5,0 m/min<br/>quill stroke: 80 mm<br/>coolant:  <br/>voltage: 380 v<br/>total power requirement: 12 kva<br/>weight of the machine ca.: 4,2 t<br/>- fabr.no.:  082772<br/>- machine on: 34.035h<br/>- control: cnc 415<br/>- electrical hand wheel<br/>- horizontal milling spindle<br/>- coolant equipment<br/><br/><br/><br/><br/> X-TRAVEL: 800 MM
Y-TRAVEL: 500 MM
Z-TRAVEL: 550 MM
CONTROL: CNC 415
SPINDLE TAPER ISO: 40
SPINDLE TURNING SPEED RANGE: 20 - 4000 U/MIN
TABLE-SIZE: 1100 X 600 MM
TABLE LOAD: 600 KG
FEEDS -STEPLESS-: 1 - 3000 MM/MIN
RAPID TRAVERSE: 5,0 M/MIN
QUILL STROKE: 80 MM
COOLANT:
VOLTAGE: 380 V
TOTAL POWER REQUIREMENT: 12 KVA
WEIGHT OF THE MACHINE CA.: 4,2 T
- FABR.NO.: 082772
- MACHINE ON: 34.035H
- CONTROL: CNC 415
- ELECTRICAL HAND WHEEL
- HORIZONTAL MILLING SPINDLE
- COOLANT EQUIPMENT




Vendedor: KIRCHGEORG Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-connected load: 16.5kw, length: 2600mm, width: 3600mm, height: 2580mm, weight: 5.8t including round table, accessories, tools, jaw chucks and tool cones.  CONNECTED LOAD: 16.5KW, LENGTH: 2600MM, WIDTH: 3600MM, HEIGHT: 2580MM, WEIGHT: 5.8T INCLUDING ROUND TABLE, ACCESSORIES, TOOLS, JAW CHUCKS AND TOOL CONES.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 3300 x 2500 x 2600 mm<br/>description: travels x-y-z: 700 - 450 - 500 mm WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 3300 X 2500 X 2600 MM
DESCRIPTION: TRAVELS X-Y-Z: 700 - 450 - 500 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-length: 2500mm, width: 4000mm, height: 1850mm, weight: 1.9t, including three-jaw chuck rÖhm.  LENGTH: 2500MM, WIDTH: 4000MM, HEIGHT: 1850MM, WEIGHT: 1.9T, INCLUDING THREE-JAW CHUCK RÖHM.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 3300 x 2500 x 2600 mm<br/>description: travels x-y-z: 700 - 450 - 500 mm WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 3300 X 2500 X 2600 MM
DESCRIPTION: TRAVELS X-Y-Z: 700 - 450 - 500 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-connected load: 6.6kw, length: 2500mm, width: 4000mm, height: 1850mm, weight: 1.9t, with milling table.  CONNECTED LOAD: 6.6KW, LENGTH: 2500MM, WIDTH: 4000MM, HEIGHT: 1850MM, WEIGHT: 1.9T, WITH MILLING TABLE.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 6.800 €
Ubicación: Land-weight approx.: 5000 kg<br/>dimensions (l x w x h) approx.: 3000 x 2200 x 2100 mm<br/>description: serial number 82414, control maho 432, table dimensions 900 x 600 mm, travels x-axis 800 mm, z-axis 550 mm, y-axis 500 mm, max. workpiece weight 450 kg, spindle holder iso 40, spindle speeds steplessly adjustable 20 to 5000 rpm, feeds in all axes stepless 1 to 4000 mm/min, rapid traverse 6 m/min, including 1 vice 125 mm jaw width, rotary table integrated (4th axis) WEIGHT APPROX.: 5000 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 2200 X 2100 MM
DESCRIPTION: SERIAL NUMBER 82414, CONTROL MAHO 432, TABLE DIMENSIONS 900 X 600 MM, TRAVELS X-AXIS 800 MM, Z-AXIS 550 MM, Y-AXIS 500 MM, MAX. WORKPIECE WEIGHT 450 KG, SPINDLE HOLDER ISO 40, SPINDLE SPEEDS STEPLESSLY ADJUSTABLE 20 TO 5000 RPM, FEEDS IN ALL AXES STEPLESS 1 TO 4000 MM/MIN, RAPID TRAVERSE 6 M/MIN, INCLUDING 1 VICE 125 MM JAW WIDTH, ROTARY TABLE INTEGRATED (4TH AXIS)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cnc milling machine
maho mh 800 e2
built in 1990
62.313 hours of operation

technical data:
x 800 mm
y-axis 500 mm
z-axis 550 mm

speed: 20-5,000 rpm.
magazine positions 30 piece
voltage 220/380 v
frequency 50/60 hz
total connected load 16 kva
cnc control resolution of linear displacement measuring systems 0.001 mm

dimensions (without expansion ground): 2.875 x 3.170 x 2,130 mm
weight: approx. 4,700 kg

accessories:
sockets sk40
arbor (weldon) diameter: 6, 8, 10, 12, 16, 20, 25 and 32 mm
short m6-m20
measuring head shots diameter 22 and 27
recordings for tools with mt shank with tang mk2 and mk3
pull studs for recording
cone cleaner mk40
machine manuals
parts catalogue
operating instructions for control cnc 432

the following components were renewed in recent years:

screen
battery storage
spindle installed maintenance and new bearings in the spindle
exchange cpu

spindle hours for renewal of the stock are likely to refer to approx. 600 hours, because the machine linear works only as a backup for a dmf 180.

generally, it is a very well maintained machine. optically and technically for her age in a very good condition.

the asking price 15,000.00 euro. CNC MILLING MACHINE MAHO MH 800 E2 BUILT IN 1990 62.313 HOURS OF OPERATION TECHNICAL DATA: X 800 MM Y-AXIS 500 MM Z-AXIS 550 MM SPEED: 20-5,000 RPM. MAGAZINE POSITIONS 30 PIECE VOLTAGE 220/380 V FREQUENCY 50/60 HZ TOTAL CONNECTED LOAD 16 KVA CNC CONTROL RESOLUTION OF LINEAR DISPLACEMENT MEASURING SYSTEMS 0.001 MM DIMENSIONS (WITHOUT EXPANSION GROUND): 2.875 X 3.170 X 2,130 MM WEIGHT: APPROX. 4,700 KG ACCESSORIES: SOCKETS SK40 ARBOR (WELDON) DIAMETER: 6, 8, 10, 12, 16, 20, 25 AND 32 MM SHORT M6-M20 MEASURING HEAD SHOTS DIAMETER 22 AND 27 RECORDINGS FOR TOOLS WITH MT SHANK WITH TANG MK2 AND MK3 PULL STUDS FOR RECORDING CONE CLEANER MK40 MACHINE MANUALS PARTS CATALOGUE OPERATING INSTRUCTIONS FOR CONTROL CNC 432 THE FOLLOWING COMPONENTS WERE RENEWED IN RECENT YEARS: SCREEN BATTERY STORAGE SPINDLE INSTALLED MAINTENANCE AND NEW BEARINGS IN THE SPINDLE EXCHANGE CPU SPINDLE HOURS FOR RENEWAL OF THE STOCK ARE LIKELY TO REFER TO APPROX. 600 HOURS, BECAUSE THE MACHINE LINEAR WORKS ONLY AS A BACKUP FOR A DMF 180. GENERALLY, IT IS A VERY WELL MAINTAINED MACHINE. OPTICALLY AND TECHNICALLY FOR HER AGE IN A VERY GOOD CONDITION. THE ASKING PRICE 15,000.00 EURO.
Vendedor: W&T EFRA
Año de construcción: usado
Precio: used machinery auction RESALE 4.900 €
Ubicación: Land-weight approx.: 3300 kg<br/>dimensions (l x w x h) approx.: 2400 x 2100 x 2100 mm<br/>description: maho mh 800 with: - with tool makers table - position measuring systems in x and y, but without display. machine under power demonstration ready. x-way 700 mm y-way 450 mm z-way 450 mm speed 32 - 1600 rpm tool holder sk 40 table size 1050 x 625 mm table load 800 kg quill stroke 80/80 mm connected load 6.5 kw machine weight approx. 3.3 t space required approx. 2.4 x 2.1 x 2.1 m WEIGHT APPROX.: 3300 KG
DIMENSIONS (L X W X H) APPROX.: 2400 X 2100 X 2100 MM
DESCRIPTION: MAHO MH 800 WITH: - WITH TOOL MAKERS TABLE - POSITION MEASURING SYSTEMS IN X AND Y, BUT WITHOUT DISPLAY. MACHINE UNDER POWER DEMONSTRATION READY. X-WAY 700 MM Y-WAY 450 MM Z-WAY 450 MM SPEED 32 - 1600 RPM TOOL HOLDER SK 40 TABLE SIZE 1050 X 625 MM TABLE LOAD 800 KG QUILL STROKE 80/80 MM CONNECTED LOAD 6.5 KW MACHINE WEIGHT APPROX. 3.3 T SPACE REQUIRED APPROX. 2.4 X 2.1 X 2.1 M
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-vertical machining centre
control: heidenhain tnc 430
the table clamping area: 850 x 600 mm
traverse path x-axis: 650 mm
stroke y axis: 500 mm
z axis travel: 500 mm
spindle speed: 1-8000 / min.
number of driven axles: 3
spindle taper: sk 40
main engine output: 10 kw
number of positions in the magazine: 30
machine dimensions (l x w x h): 4100 x 3900 x 2900 mm
machine weight: 10,500 kg VERTICAL MACHINING CENTRE CONTROL: HEIDENHAIN TNC 430 THE TABLE CLAMPING AREA: 850 X 600 MM TRAVERSE PATH X-AXIS: 650 MM STROKE Y AXIS: 500 MM Z AXIS TRAVEL: 500 MM SPINDLE SPEED: 1-8000 / MIN. NUMBER OF DRIVEN AXLES: 3 SPINDLE TAPER: SK 40 MAIN ENGINE OUTPUT: 10 KW NUMBER OF POSITIONS IN THE MAGAZINE: 30 MACHINE DIMENSIONS (L X W X H): 4100 X 3900 X 2900 MM MACHINE WEIGHT: 10,500 KG
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Precio: 11.200 €
Ubicación: Land-: 720 x 410 mm<br/>: 500/400/400 mm<br/>: 40 iso<br/>: 590 mm<br/>: 40/80 mm<br/>: 1.030 x 250 mm<br/>: 6,5 kw<br/>: 1.600 mm<br/>: 1.750 mm<br/>: 1.850 mm<br/>: 1.450 kg<br/>track control heidenhain tnc 122 for x,y,z axes<br/>spindle intake iso 40<br/>hyd. tool clamping for v/h quill<br/>aut. feeds with rapid feeds<br/>swivelable and rotateable angle table clamping table 360° rotateable, 30° left/right swivelable and 45° inclinable<br/>h quill 30° left/right inclinable<br/>central lunrication<br/>machine lamp<br/>users manual in german<br/> <br/>does not comply with the present industrial safety regulation (amvo &, uvv)<br/><br/>table: 720 x 410 mm<br/>working area: 500/400/400 mm<br/>taper: iso 40<br/>revs: 40 - 2.000 r/min&apos,<br/>aut. feeds in x/y/z: 12,5 - 500 mm/min<br/>throat depth: 590 mm<br/>quill travel v/h: 40/80 mm<br/>vertical working table: 1.030 x 250 mm<br/>motor: 6,5 kw<br/>length: 1.600 mm<br/>width: 1.750 mm<br/>height: 1.850 mm<br/>weight: 1.450 kg<br/><br/><br/><br/> : 720 X 410 MM
: 500/400/400 MM
: 40 ISO
: 590 MM
: 40/80 MM
: 1.030 X 250 MM
: 6,5 KW
: 1.600 MM
: 1.750 MM
: 1.850 MM
: 1.450 KG
TRACK CONTROL HEIDENHAIN TNC 122 FOR X,Y,Z AXES
SPINDLE INTAKE ISO 40
HYD. TOOL CLAMPING FOR V/H QUILL
AUT. FEEDS WITH RAPID FEEDS
SWIVELABLE AND ROTATEABLE ANGLE TABLE CLAMPING TABLE 360° ROTATEABLE, 30° LEFT/RIGHT SWIVELABLE AND 45° INCLINABLE
H QUILL 30° LEFT/RIGHT INCLINABLE
CENTRAL LUNRICATION
MACHINE LAMP
USERS MANUAL IN GERMAN

DOES NOT COMPLY WITH THE PRESENT INDUSTRIAL SAFETY REGULATION (AMVO &, UVV)

TABLE: 720 X 410 MM
WORKING AREA: 500/400/400 MM
TAPER: ISO 40
REVS: 40 - 2.000 R/MIN&APOS,
AUT. FEEDS IN X/Y/Z: 12,5 - 500 MM/MIN
THROAT DEPTH: 590 MM
QUILL TRAVEL V/H: 40/80 MM
VERTICAL WORKING TABLE: 1.030 X 250 MM
MOTOR: 6,5 KW
LENGTH: 1.600 MM
WIDTH: 1.750 MM
HEIGHT: 1.850 MM
WEIGHT: 1.450 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-control: heidenhain tnc 426
turntable - 4th axis
swivel head
hours of operation: approx. 15,000 hours
including handwheel
procedures:
x: 800 mm
y: 650 mm
w: 550 mm
feed (x, y, z): 10,000 mm / min
eligang: 15 m / min
spindle speed: 6300 rpm
table dimensions: 1100 x 600 mm
maximum table load: 500 kg
tool holder: sk 40
power: 17 / 11, 5kw
machine weight: 6000 kg
machine dimensions: approx. 5500 x 3500 x 3100 mm CONTROL: HEIDENHAIN TNC 426 TURNTABLE - 4TH AXIS SWIVEL HEAD HOURS OF OPERATION: APPROX. 15,000 HOURS INCLUDING HANDWHEEL PROCEDURES: X: 800 MM Y: 650 MM W: 550 MM FEED (X, Y, Z): 10,000 MM / MIN ELIGANG: 15 M / MIN SPINDLE SPEED: 6300 RPM TABLE DIMENSIONS: 1100 X 600 MM MAXIMUM TABLE LOAD: 500 KG TOOL HOLDER: SK 40 POWER: 17 / 11, 5KW MACHINE WEIGHT: 6000 KG MACHINE DIMENSIONS: APPROX. 5500 X 3500 X 3100 MM
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Precio: used machinery auction RESALE 2.900 €
Ubicación: Land-weight approx.: 3100 kg<br/>x-travel: 600 mm<br/>y-travel: 350 mm<br/>z-travel: 400 mm<br/>control: heidenhain <br/>dimensions (l x w x h) approx.: 4100 x 3700 x 2150 mm<br/>turning speed range: 20 - 4000 rpm<br/>table surface area l x w : 900 x 460 mm<br/>description:  - serial number: 63436 - table dimension: 900 x 460 mm - cnc control: heidenhain - max. feed in longitudinal direction x-axis: 600 mm - max. feed in traverse direction y-axis: 350 mm - max. feed in height z-axis: 400 mm<, - frequency: 50 hz - voltage: 3 x 380 volts - spindle speed: 20 - 4000 rpm - dimensions approx.: 4100 x 3700 x 2150 mm - weight approx. 3100 kg WEIGHT APPROX.: 3100 KG
X-TRAVEL: 600 MM
Y-TRAVEL: 350 MM
Z-TRAVEL: 400 MM
CONTROL: HEIDENHAIN
DIMENSIONS (L X W X H) APPROX.: 4100 X 3700 X 2150 MM
TURNING SPEED RANGE: 20 - 4000 RPM
TABLE SURFACE AREA L X W : 900 X 460 MM
DESCRIPTION: - SERIAL NUMBER: 63436 - TABLE DIMENSION: 900 X 460 MM - CNC CONTROL: HEIDENHAIN - MAX. FEED IN LONGITUDINAL DIRECTION X-AXIS: 600 MM - MAX. FEED IN TRAVERSE DIRECTION Y-AXIS: 350 MM - MAX. FEED IN HEIGHT Z-AXIS: 400 MM<, - FREQUENCY: 50 HZ - VOLTAGE: 3 X 380 VOLTS - SPINDLE SPEED: 20 - 4000 RPM - DIMENSIONS APPROX.: 4100 X 3700 X 2150 MM - WEIGHT APPROX. 3100 KG
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 904974
number: 1 pcs.
manufacturer: lid maho
type: dmu 70
control: heidenhain of millplus it
year of construction: 2008
state of preservation: second-hand machine
machine a (hours): 34,000
spindle a (hours): 15,500

description

milling

travel in x 750 mm
travel in y 600 mm
travel in z 520 mm
maximum rapid traverse in x/y/z 24/24/24 m / min
direct measuring system x/y/z
toolholder sk 40
maximum speed milling spindle 10000 1/min
maximum power with ed 10-40 / 100% 13/9 kw
chain-type tool magazine 30 stations
max tool diameter 80 mm
max tool diameter when free neighbouring seats 130 mm
maximum tool length 300 mm
maximum tool weight 6 kg
rotary table
swivel range + 10 to-95 degrees
diameter round table 800 ã? 620 mm

more facilities

ir workpiece measuring probes
tool breakage control by means of push button
splash panel with fully encapsulated workspace
rotating viewing window
scratch band conveyors
machine is / was operated with emulsion
internal coolant supply
coolant gun
coolant system with paper band filter
high pressure pump 20 bar
mode 4
machine status light

general technical data

total power 32 kva
floor space of throughout the facility lxwxh) approx. 5000 x 4500 x 3100 mm
machine weight approx. 8000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904974 NUMBER: 1 PCS. MANUFACTURER: LID MAHO TYPE: DMU 70 CONTROL: HEIDENHAIN OF MILLPLUS IT YEAR OF CONSTRUCTION: 2008 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 34,000 SPINDLE A (HOURS): 15,500 DESCRIPTION MILLING TRAVEL IN X 750 MM TRAVEL IN Y 600 MM TRAVEL IN Z 520 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 24/24/24 M / MIN DIRECT MEASURING SYSTEM X/Y/Z TOOLHOLDER SK 40 MAXIMUM SPEED MILLING SPINDLE 10000 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 13/9 KW CHAIN-TYPE TOOL MAGAZINE 30 STATIONS MAX TOOL DIAMETER 80 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 130 MM MAXIMUM TOOL LENGTH 300 MM MAXIMUM TOOL WEIGHT 6 KG ROTARY TABLE SWIVEL RANGE + 10 TO-95 DEGREES DIAMETER ROUND TABLE 800 &ATILDE;? 620 MM MORE FACILITIES IR WORKPIECE MEASURING PROBES TOOL BREAKAGE CONTROL BY MEANS OF PUSH BUTTON SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE ROTATING VIEWING WINDOW SCRATCH BAND CONVEYORS MACHINE IS / WAS OPERATED WITH EMULSION INTERNAL COOLANT SUPPLY COOLANT GUN COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 20 BAR MODE 4 MACHINE STATUS LIGHT GENERAL TECHNICAL DATA TOTAL POWER 32 KVA FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 5000 X 4500 X 3100 MM MACHINE WEIGHT APPROX. 8000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 2.500 €
Ubicación: Land-weight approx.: 4700 kg<br/>dimensions (l x w x h) approx.: 2900 x 3170 x 2130 mm<br/>description: serial number 82305, travels x 800 mm, y 500 mm, z 550 mm, speed range 20 to 5000 rpm, feeds 1 to 5000 mm/min, table 1100 x 600 mm, quill stroke 80 mm, tool holder iso 40, tool changer 20-fold, control maho cnc 432, hour counter approx. 27240 WEIGHT APPROX.: 4700 KG
DIMENSIONS (L X W X H) APPROX.: 2900 X 3170 X 2130 MM
DESCRIPTION: SERIAL NUMBER 82305, TRAVELS X 800 MM, Y 500 MM, Z 550 MM, SPEED RANGE 20 TO 5000 RPM, FEEDS 1 TO 5000 MM/MIN, TABLE 1100 X 600 MM, QUILL STROKE 80 MM, TOOL HOLDER ISO 40, TOOL CHANGER 20-FOLD, CONTROL MAHO CNC 432, HOUR COUNTER APPROX. 27240
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)