1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-<b>properties:</b>

used roller track converter of manufacturer's scarce
feet must be ordered separately
condition: fully functional with traces of use
ideal for fast material handling
expertly disassembled and packed
drive type: flat belt with motor
number: 4 pcs.
2 stk. with partial engine
2 pcs with engine under the conveyor

<b>converter</b>

converter with chains or straps gently raise the goods and settle it gently on the goal line. this includes both routes leave during recording and weaning shortly.

<b>technical data:

mass of the roller</b>
overall length: 720mm
total width: 1040 mm
width: 485 mm

<b>information on the role</b>
clamping length: 415 mm
diameter approx: 50mm
material: steel, galvanised

<b>information to the converter</b>
length: 910mm
belt width: 25 mm
number of belts: 2 pcs.

<b>tailor-made solutions for your intralogistics</b>

we are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! gladly we will create you an individual offer or advise on the design or assembly questions. just let your needs and local conditions us to.

take advantage of our many years of experience and our excellent network of professionals. for companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry habean we already successfully realized projects.

together, we will work out ways to optimize your process and material flow cost effectively and sustainably. we can offer you even fully automatic sorting equipment or additional components such as picking racks or containers. <B>PROPERTIES:</B> USED ROLLER TRACK CONVERTER OF MANUFACTURER'S SCARCE FEET MUST BE ORDERED SEPARATELY CONDITION: FULLY FUNCTIONAL WITH TRACES OF USE IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED DRIVE TYPE: FLAT BELT WITH MOTOR NUMBER: 4 PCS. 2 STK. WITH PARTIAL ENGINE 2 PCS WITH ENGINE UNDER THE CONVEYOR <B>CONVERTER</B> CONVERTER WITH CHAINS OR STRAPS GENTLY RAISE THE GOODS AND SETTLE IT GENTLY ON THE GOAL LINE. THIS INCLUDES BOTH ROUTES LEAVE DURING RECORDING AND WEANING SHORTLY. <B>TECHNICAL DATA: MASS OF THE ROLLER</B> OVERALL LENGTH: 720MM TOTAL WIDTH: 1040 MM WIDTH: 485 MM <B>INFORMATION ON THE ROLE</B> CLAMPING LENGTH: 415 MM DIAMETER APPROX: 50MM MATERIAL: STEEL, GALVANISED <B>INFORMATION TO THE CONVERTER</B> LENGTH: 910MM BELT WIDTH: 25 MM NUMBER OF BELTS: 2 PCS. <B>TAILOR-MADE SOLUTIONS FOR YOUR INTRALOGISTICS</B> WE ARE YOUR COMPETENT PARTNER FOR ROLLER CONVEYORS, BELT LIFTS, INCLINED CONVEYORS OR TELESCOPES TO THE LOADING AND UNLOADING OF GOODS! GLADLY WE WILL CREATE YOU AN INDIVIDUAL OFFER OR ADVISE ON THE DESIGN OR ASSEMBLY QUESTIONS. JUST LET YOUR NEEDS AND LOCAL CONDITIONS US TO. TAKE ADVANTAGE OF OUR MANY YEARS OF EXPERIENCE AND OUR EXCELLENT NETWORK OF PROFESSIONALS. FOR COMPANIES OF VARIOUS INDUSTRIES, SUCH AS: LOGISTICS, PHARMACEUTICAL INDUSTRY, CRAFTS OR THE ELECTRONICS INDUSTRY HABEAN WE ALREADY SUCCESSFULLY REALIZED PROJECTS. TOGETHER, WE WILL WORK OUT WAYS TO OPTIMIZE YOUR PROCESS AND MATERIAL FLOW COST EFFECTIVELY AND SUSTAINABLY. WE CAN OFFER YOU EVEN FULLY AUTOMATIC SORTING EQUIPMENT OR ADDITIONAL COMPONENTS SUCH AS PICKING RACKS OR CONTAINERS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Precio: 34.500 EU€
Ubicación: Land-plasma cutter ajan shp 260a is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. with these tools you can make straight cuts and linear cuts, according to programmed cutting programs or by manually controlling the cutting path. condition of the equipment good. PLASMA CUTTER AJAN SHP 260A IS A NUMERICALLY CONTROLLED OXYGEN SHEET CUTTING DEVICE, USING ORIGINAL CUTTING TOOLS MOUNTED ON IT, AND CAN BE GAS AND PLASMA TOOLS. WITH THESE TOOLS YOU CAN MAKE STRAIGHT CUTS AND LINEAR CUTS, ACCORDING TO PROGRAMMED CUTTING PROGRAMS OR BY MANUALLY CONTROLLING THE CUTTING PATH. CONDITION OF THE EQUIPMENT GOOD.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-<b>properties:</b>

used roller track converter of manufacturer's scarce
feet must be ordered separately
condition: fully functional with traces of use
ideal for fast material handling
expertly disassembled and packed
drive type: flat belt with motor

<b>converter</b>

converter with chains or straps gently raise the goods and settle it gently on the goal line. this includes both routes leave during recording and weaning shortly.

<b>technical data:

mass of the roller</b>
overall length: 900mm
total width: 1030 mm
width: 485 mm

<b>information on the role</b>
clamping length: 415 mm
diameter approx: 50mm
material: steel, galvanised

<b>information to the converter</b>
length: 910mm
belt width: 25 mm
number of straps: 4 pcs.

<b>tailor-made solutions for your intralogistics</b>

we are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! gladly we will create you an individual offer or advise on the design or assembly questions. just let your needs and local conditions us to.

take advantage of our many years of experience and our excellent network of professionals. for companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

together, we will work out ways to optimize your process and material flow cost effectively and sustainably. we can offer you even fully automatic sorting equipment or additional components such as picking racks or containers. <B>PROPERTIES:</B> USED ROLLER TRACK CONVERTER OF MANUFACTURER'S SCARCE FEET MUST BE ORDERED SEPARATELY CONDITION: FULLY FUNCTIONAL WITH TRACES OF USE IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED DRIVE TYPE: FLAT BELT WITH MOTOR <B>CONVERTER</B> CONVERTER WITH CHAINS OR STRAPS GENTLY RAISE THE GOODS AND SETTLE IT GENTLY ON THE GOAL LINE. THIS INCLUDES BOTH ROUTES LEAVE DURING RECORDING AND WEANING SHORTLY. <B>TECHNICAL DATA: MASS OF THE ROLLER</B> OVERALL LENGTH: 900MM TOTAL WIDTH: 1030 MM WIDTH: 485 MM <B>INFORMATION ON THE ROLE</B> CLAMPING LENGTH: 415 MM DIAMETER APPROX: 50MM MATERIAL: STEEL, GALVANISED <B>INFORMATION TO THE CONVERTER</B> LENGTH: 910MM BELT WIDTH: 25 MM NUMBER OF STRAPS: 4 PCS. <B>TAILOR-MADE SOLUTIONS FOR YOUR INTRALOGISTICS</B> WE ARE YOUR COMPETENT PARTNER FOR ROLLER CONVEYORS, BELT LIFTS, INCLINED CONVEYORS OR TELESCOPES TO THE LOADING AND UNLOADING OF GOODS! GLADLY WE WILL CREATE YOU AN INDIVIDUAL OFFER OR ADVISE ON THE DESIGN OR ASSEMBLY QUESTIONS. JUST LET YOUR NEEDS AND LOCAL CONDITIONS US TO. TAKE ADVANTAGE OF OUR MANY YEARS OF EXPERIENCE AND OUR EXCELLENT NETWORK OF PROFESSIONALS. FOR COMPANIES OF VARIOUS INDUSTRIES, SUCH AS: LOGISTICS, PHARMACEUTICAL INDUSTRY, CRAFTS OR THE ELECTRONICS INDUSTRY WE HAVE ALREADY SUCCESSFULLY IMPLEMENTED PROJECTS. TOGETHER, WE WILL WORK OUT WAYS TO OPTIMIZE YOUR PROCESS AND MATERIAL FLOW COST EFFECTIVELY AND SUSTAINABLY. WE CAN OFFER YOU EVEN FULLY AUTOMATIC SORTING EQUIPMENT OR ADDITIONAL COMPONENTS SUCH AS PICKING RACKS OR CONTAINERS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Ubicación: Land-reactor (1x), make de dietrich, type ae-4000 l, no 62998, new 1999, material glass lined (3009 u), capacity 5374 ltr, vessel sizes dia. 1796x1520mm, dished bottom, dished top side, manhole dia. 500mm, top connections 5x dia. 150mm + 2x dia. 250mm, outlet dia. 100mm, working pressure vac/6 bar, test pressure 9 bar, with jacket (677 ltr), working pressure vac/7 bar, test pressure 12 bar, max. temperature -25/+200 degr. c., with propellor stirrer, motor 11,0 kw, 230/400 volt (ex), floorspace 2,4x2,4 mreactorsreactors > reactors what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! REACTOR (1X), MAKE DE DIETRICH, TYPE AE-4000 L, NO 62998, NEW 1999, MATERIAL GLASS LINED (3009 U), CAPACITY 5374 LTR, VESSEL SIZES DIA. 1796X1520MM, DISHED BOTTOM, DISHED TOP SIDE, MANHOLE DIA. 500MM, TOP CONNECTIONS 5X DIA. 150MM + 2X DIA. 250MM, OUTLET DIA. 100MM, WORKING PRESSURE VAC/6 BAR, TEST PRESSURE 9 BAR, WITH JACKET (677 LTR), WORKING PRESSURE VAC/7 BAR, TEST PRESSURE 12 BAR, MAX. TEMPERATURE -25/+200 DEGR. C., WITH PROPELLOR STIRRER, MOTOR 11,0 KW, 230/400 VOLT (EX), FLOORSPACE 2,4X2,4 MREACTORSREACTORS > REACTORS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-<b>properties:</b>

condition: fully functional, with traces of use
manufacturer: knapp
material: steel
expertly disassembled and packed
condition: good
extended clamping: 650 mm
clamp retracted: 600 mm
quantity: 10 pcs. <B>PROPERTIES:</B> CONDITION: FULLY FUNCTIONAL, WITH TRACES OF USE MANUFACTURER: KNAPP MATERIAL: STEEL EXPERTLY DISASSEMBLED AND PACKED CONDITION: GOOD EXTENDED CLAMPING: 650 MM CLAMP RETRACTED: 600 MM QUANTITY: 10 PCS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Ubicación: Land-grinder classifier system, make mikropul gmbh, type acm-10, material stainless steel, grinding room size dia. 310mm, fixed hammers, with grinding track, inlet dia. 50mm, feeding with rotating valve, motor 7,5 kw 380 volt , 1,1 kw 220/380 volt, mounted on frame, with switchgear, floorspace ± 3,3 x 2,2 m, total height 2,7 m, weight ± 1600 kg, extra specifications 1x ventilator van tongeren kennemer type s395/3/4800 11kw, 400/690 volt, 1x dosing screw dia. 225mm 0,37 kw, 220/380 volt, 1x dustcollector donaldson tdp675 230 volt, 1x cyclonefilter :van tongeren kennemer type ac850/3.0, 1x cabinet. +++ overhauled +++size reduction millsgrinders > size reduction mills what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! GRINDER CLASSIFIER SYSTEM, MAKE MIKROPUL GMBH, TYPE ACM-10, MATERIAL STAINLESS STEEL, GRINDING ROOM SIZE DIA. 310MM, FIXED HAMMERS, WITH GRINDING TRACK, INLET DIA. 50MM, FEEDING WITH ROTATING VALVE, MOTOR 7,5 KW 380 VOLT , 1,1 KW 220/380 VOLT, MOUNTED ON FRAME, WITH SWITCHGEAR, FLOORSPACE ± 3,3 X 2,2 M, TOTAL HEIGHT 2,7 M, WEIGHT ± 1600 KG, EXTRA SPECIFICATIONS 1X VENTILATOR VAN TONGEREN KENNEMER TYPE S395/3/4800 11KW, 400/690 VOLT, 1X DOSING SCREW DIA. 225MM 0,37 KW, 220/380 VOLT, 1X DUSTCOLLECTOR DONALDSON TDP675 230 VOLT, 1X CYCLONEFILTER :VAN TONGEREN KENNEMER TYPE AC850/3.0, 1X CABINET. +++ OVERHAULED +++SIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-<b>properties:</b>

condition: fully functional, with traces of use
manufacturer: knapp
material: steel
expertly disassembled and packed
condition: good
extended clamping: 650 mm
clamp retracted: 600 mm
quantity: 10 pcs. <B>PROPERTIES:</B> CONDITION: FULLY FUNCTIONAL, WITH TRACES OF USE MANUFACTURER: KNAPP MATERIAL: STEEL EXPERTLY DISASSEMBLED AND PACKED CONDITION: GOOD EXTENDED CLAMPING: 650 MM CLAMP RETRACTED: 600 MM QUANTITY: 10 PCS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Ubicación: Land-colloid mill (1x), make brogli (collovelox), no 2121, house material stainless steel, rotor material stainless steel, rotor sizes dia.75-140mm, with hopper 15ltr. dia.400mm, outlet dia.25mm, motor 5,5kw.380/660volt, with switch, floorspace 0,8x0,7m, total height 1,3mcolloid millsgrinders > colloid mills what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! COLLOID MILL (1X), MAKE BROGLI (COLLOVELOX), NO 2121, HOUSE MATERIAL STAINLESS STEEL, ROTOR MATERIAL STAINLESS STEEL, ROTOR SIZES DIA.75-140MM, WITH HOPPER 15LTR. DIA.400MM, OUTLET DIA.25MM, MOTOR 5,5KW.380/660VOLT, WITH SWITCH, FLOORSPACE 0,8X0,7M, TOTAL HEIGHT 1,3MCOLLOID MILLSGRINDERS > COLLOID MILLS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-<b>properties:</b>

condition: fully functional, with traces of use
manufacturer: knapp
material: steel
expertly disassembled and packed
condition: good
extended clamping: 450 mm
clamp retracted: 400 mm
quantity: 20 pcs. <B>PROPERTIES:</B> CONDITION: FULLY FUNCTIONAL, WITH TRACES OF USE MANUFACTURER: KNAPP MATERIAL: STEEL EXPERTLY DISASSEMBLED AND PACKED CONDITION: GOOD EXTENDED CLAMPING: 450 MM CLAMP RETRACTED: 400 MM QUANTITY: 20 PCS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Ubicación: Land-grinder victory mill (1x), make hosokawa micron, type vp-4, no 420135, new 1973, material stainless steel, rotor size dia. 630x400mm, fixed hammers (60 flat hammers), hammer width 400mm, with grinding platens, inlet 400x400mm, motor 55 kw, 380 volt, speed 2650 rpm, mounted on frame, floorspace 2,2x1,8 m, total height 1,8 msize reduction millsgrinders > size reduction mills what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! GRINDER VICTORY MILL (1X), MAKE HOSOKAWA MICRON, TYPE VP-4, NO 420135, NEW 1973, MATERIAL STAINLESS STEEL, ROTOR SIZE DIA. 630X400MM, FIXED HAMMERS (60 FLAT HAMMERS), HAMMER WIDTH 400MM, WITH GRINDING PLATENS, INLET 400X400MM, MOTOR 55 KW, 380 VOLT, SPEED 2650 RPM, MOUNTED ON FRAME, FLOORSPACE 2,2X1,8 M, TOTAL HEIGHT 1,8 MSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 990 €
Ubicación: Land-new gas pressure regulator, itron, dn50, rr16-50-54-12n-sl-izn.1
manufacturer: itron
type: rr16-50-54-12n-sl-izn.1

- dn50, pn16
- w dso 35 mbar - 250 mbar

condition: the gas pressure regulator was purchased from a spare parts warehouse of a company and is still in its original packaging

dimensions: 43cm x 40cm x 85cm high
weight: 46 kg NEW GAS PRESSURE REGULATOR, ITRON, DN50, RR16-50-54-12N-SL-IZN.1 MANUFACTURER: ITRON TYPE: RR16-50-54-12N-SL-IZN.1 - DN50, PN16 - W DSO 35 MBAR - 250 MBAR CONDITION: THE GAS PRESSURE REGULATOR WAS PURCHASED FROM A SPARE PARTS WAREHOUSE OF A COMPANY AND IS STILL IN ITS ORIGINAL PACKAGING DIMENSIONS: 43CM X 40CM X 85CM HIGH WEIGHT: 46 KG
Vendedor: IPV GmbH
Año de construcción: usado
Precio: 9.900 €
Ubicación: Land-; power [ps]: 475; gross weight [kg]: 18000; engine: iveco; accessories: generator 500kva with hot water boiler, , mhkw systems., , manufacturer engine: iveco, typ engine: mtd, cnm, 350, manufacturer generator: avk, typ generator: dsg52m1.4, year: 1994, fuel: diesel, serial number engine: 000173, serial number generator: 66162 ; POWER [PS]: 475; GROSS WEIGHT [KG]: 18000; ENGINE: IVECO; ACCESSORIES: GENERATOR 500KVA WITH HOT WATER BOILER, , MHKW SYSTEMS., , MANUFACTURER ENGINE: IVECO, TYP ENGINE: MTD, CNM, 350, MANUFACTURER GENERATOR: AVK, TYP GENERATOR: DSG52M1.4, YEAR: 1994, FUEL: DIESEL, SERIAL NUMBER ENGINE: 000173, SERIAL NUMBER GENERATOR: 66162
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 990 €
Ubicación: Land-new gas pressure regulator, itron, dn80, rr16-80-82-12n-sl-izn.1
manufacturer: itron
type: rr16-80-82-12n-sl-izn.1

- dn80, pn16
- w dso 35 mbar - 250 mbar

condition: the gas pressure regulator was purchased from a spare parts warehouse of a company and is still in its original packaging

dimensions: 43cm x 40cm x90cm high
weight: 63 kg NEW GAS PRESSURE REGULATOR, ITRON, DN80, RR16-80-82-12N-SL-IZN.1 MANUFACTURER: ITRON TYPE: RR16-80-82-12N-SL-IZN.1 - DN80, PN16 - W DSO 35 MBAR - 250 MBAR CONDITION: THE GAS PRESSURE REGULATOR WAS PURCHASED FROM A SPARE PARTS WAREHOUSE OF A COMPANY AND IS STILL IN ITS ORIGINAL PACKAGING DIMENSIONS: 43CM X 40CM X90CM HIGH WEIGHT: 63 KG
Vendedor: IPV GmbH
Año de construcción: usado
Precio: 16.900 €
Ubicación: Land-; gross weight [kg]: 6010; rear tyres remaining: 40; front tyres remaining: 40; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6010; REAR TYRES REMAINING: 40; FRONT TYRES REMAINING: 40; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-press force: 100 t	
stroke length: 40 mm	
number of strokes - idling:	
single stroke 150-350 z / m	
ram adjustment: 30 mm	
table mounting surface:	
1240 x 2020 mm	
plate holes:	
800 x 400/800 x 160/800 x 160 mm	
side post passage: 730 mm	
motor power: 4p x 22 kw	
machine weight: 18000 kg	
accessories:	
decoiler	
forklifts	
noise barrier	
fence	
drawing documentation	
manuals	
lubrication (lubricatino)	
clutch and brake	
dry clutch	
disc brake PRESS FORCE: 100 T STROKE LENGTH: 40 MM NUMBER OF STROKES - IDLING: SINGLE STROKE 150-350 Z / M RAM ADJUSTMENT: 30 MM TABLE MOUNTING SURFACE: 1240 X 2020 MM PLATE HOLES: 800 X 400/800 X 160/800 X 160 MM SIDE POST PASSAGE: 730 MM MOTOR POWER: 4P X 22 KW MACHINE WEIGHT: 18000 KG ACCESSORIES: DECOILER FORKLIFTS NOISE BARRIER FENCE DRAWING DOCUMENTATION MANUALS LUBRICATION (LUBRICATINO) CLUTCH AND BRAKE DRY CLUTCH DISC BRAKE
Vendedor: AMARON s.r.o.
Año de construcción: usado
Precio: 26.700 €
Ubicación: Land-; accessories: leistung (brief):86, bereifung (v):460/70-24, bereifung (h):460/70-24, allrad, kabine, klimaanlage - manuell, schnellwechselrahmen, diesel, teleskoparm (längenverstellung); maximum lift capacity [kg]: 3000 ; ACCESSORIES: LEISTUNG (BRIEF):86, BEREIFUNG (V):460/70-24, BEREIFUNG (H):460/70-24, ALLRAD, KABINE, KLIMAANLAGE - MANUELL, SCHNELLWECHSELRAHMEN, DIESEL, TELESKOPARM (LäNGENVERSTELLUNG); MAXIMUM LIFT CAPACITY [KG]: 3000
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Precio: 3.250.000 usd
Ubicación: Land-we have a compltet metyear.serious contact us,please. hanol plant for sale,set up in 2007,capacity 100,000t/y.designed and manufactured by chinese company.stopped less one year,good condition.serious contact us ,please    WE HAVE A COMPLTET METYEAR.SERIOUS CONTACT US,PLEASE. HANOL PLANT FOR SALE,SET UP IN 2007,CAPACITY 100,000T/Y.DESIGNED AND MANUFACTURED BY CHINESE COMPANY.STOPPED LESS ONE YEAR,GOOD CONDITION.SERIOUS CONTACT US ,PLEASE
Vendedor: SHANGHAI HELM IMP.&EXP. LTD
Año de construcción: usado
Precio: 38.800 €
Ubicación: Land-; rear tyres remaining: 100; front tyres remaining: 100; accessories: leistung (brief):88, bereifung (v):460/70-24, bereifung (h):460/70-24, arbeitsscheinwerfer 4x vorn, allrad, kabine, klimaanlage - manuell, schnellwechselrahmen, diesel, teleskoparm (längenverstellung); maximum lift capacity [kg]: 4000 ; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; ACCESSORIES: LEISTUNG (BRIEF):88, BEREIFUNG (V):460/70-24, BEREIFUNG (H):460/70-24, ARBEITSSCHEINWERFER 4X VORN, ALLRAD, KABINE, KLIMAANLAGE - MANUELL, SCHNELLWECHSELRAHMEN, DIESEL, TELESKOPARM (LäNGENVERSTELLUNG); MAXIMUM LIFT CAPACITY [KG]: 4000
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-ostas plate shear

type orgm 2050 x 3

-capaciteit 2050 x 3 mm
-achteraanslag electrical
-voetbediening
-fotocelbeveiliging van de achterzijde
-oplegarmen
-verlichting van snijlijn
-remmotor
-noodstop
-documentatie
-weight 2000 kg
-400v

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) OSTAS PLATE SHEAR TYPE ORGM 2050 X 3 -CAPACITEIT 2050 X 3 MM -ACHTERAANSLAG ELECTRICAL -VOETBEDIENING -FOTOCELBEVEILIGING VAN DE ACHTERZIJDE -OPLEGARMEN -VERLICHTING VAN SNIJLIJN -REMMOTOR -NOODSTOP -DOCUMENTATIE -WEIGHT 2000 KG -400V DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Ubicación: Land-15,4 to; power [ps]: 159; gross weight [kg]: 15430; engine: cummins qsb4.5-c160tier3 15,4 TO; POWER [PS]: 159; GROSS WEIGHT [KG]: 15430; ENGINE: CUMMINS QSB4.5-C160TIER3
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-powder coating equipment

 parkerizing phosphate coating equipment
make:wastec(korean)
year:2014
2) process tank 
? load/unload(#1):size: 800(w) x 1,200(l) x 1,200(h)mm 
? alkali cleaner tank(#2) : size: 800(w) x 1,200(l) x 1,200(h)mm
3) 2-step water rinse bath(#3,4): size: 1,400(w) x 1,200(l) x 1,200(h)mm
4) acid rinse bath(#5): size: 750(w) x 1,200(l) x  1,200(h)mm
5) 2-step water rinse bath(#6,7): 1,400(w) x 1,200(l) x  1,200(h)mm
7) surface condition bath(#8) :: 750(w) x 1,200(l) 1,200(h)mm
8) coating bath(#9,10) : 900(w) x 1,200(l) x 1,200(h)mm
9) hot water rinse(#11) : 750(w) x 1,200(l) x 1,200(h)mm
10) dry tank(#12) :  
 size(inside): 700(w) x   1,200(l) x 1,200(h)mm
    size(outside): 1,300(w) x  2,000(l) x 1,200(h)mm  
  temp: 90?~110?
11) carrier system(#1,2): 1,400(w) x 1,600(l) x 600(h)mm 
   line speed:   transer-0.2~0.6m/sec     lifting-0.2~0.5m/sec
12) heating system :   steam heater
13) degreaser oil and water separator 
  tank(sus304): 600(w)x 1,200(l) x 700(h)mm
14) liquid agitator   
 15) acid bath filter:  4,800~6,000?/hr
16) piping system
17) basket    size: 500(w) x 600(l) x  400(h)mm
18) condensing water recovery ststem
19) electrical system 
   main power: 440v x 3Ø x 60hz  
  control power: 220v x 1Ø   x 60hz   
20) anti-polution system
21) carrier type tank :: 1,100?

sand blast m/c
make:sanga(korea)
year:2014
 conveyor type 
cycle time: 10~12sec
 cyclone & storage tank: Ø450 x 800(l)mm 
nozzle unit 
conveyor & turning unit 
loading/unloading unit 
nozzle oscillator 
dust collector

anti-air pollution equipment 
make:seonghwa(korea)
year:2014
packed-tower 
cap: 230cmm 
body: ?2,000 x 5,000(l)mm 
stack: ?650 x 3,000(l)mm 
turbo fan: 230?/min x 200mmaq 
motor: 20hp 

coating and dryer 
make:wastec(korean)
year:2002
14,500(l) x 4,000(w x 1,500(h) 
2) 300kw  
cap: 1,080ea/hr 
1) preheater dryer: 3,000(l) x 2,200(w)  , 30kw(1set)  
 blower: 23.3? x 19mmaq          
2) 1st coating  1,500(l) x 2,000(w)
nozzle: 6set 
 3) 1st dryer: 4,800(l) x 2,200(w), 24kw(2set)  
 blower: 20? x 17mmaq(2set)
4) 2nd coating  
 nozzle: 6set , 1,500(l) x 2,000(w)
5) 2nd dryer:: 4,000(l) x 2,000(w), 30kw(1set)  
 blower: 20? x 17mmaq(1set)
6) low temperature dryer:: 12,500(l) x 1,000(w), 30kw(3set)  
 blower: 23.3? x 190mmaq (3set)
7) cooling  : 1,000(l) x 800(w) , 10kw(1set)

washing equipment 
make:wastec(korean)
year:2002
7,000(l) x 1,100(w) x 1,800(h) 
2) cap: 1,500ea/hr 
3) 100kw
4)  r/o system
5) electric heater type

 dryer 
make:hanil(korea)
year:2002
 size: 1,440(l) x 2,000(w) x 1,530(h)
2) cap: 1,000ea/hr 
3)  40kw
4) car and rack 2set
5) heater: scr unit type

washer & bush insert m/c 
make:kumduk(korea)
year:2015
turn table unit: 2head 
unloading loader 
base & frame & cover: 75 x 75mm square pipe 
in loader unit 
index table unit 
washer loader unit x 2set
 washer check unit 
bush feed press unit: bush 

3-pin press  
make:kumduk(korea)
year:2015
base & frame & cover 
6-axics multi articulation  robot(yaskawa) 
manipulator
 index table unit 
3-pin feed unit
3-pin press unit 
unloading unit
 3-pin height check unit 

air compressor
make:taesan(korea)
year:2015
 
shaft powder coating line
make:misung(korea)
year:2015
 loading & unloading unit 
 preheater dry oven 45kw(15kw x 3set)
preheater after cooling zone: 
4) powder automatic equipment
5) idle transfer & index unit
6) loading transfer & masking    jig unit
7) oven jig: 16 x 130ea
8) powder recovery system
9) main baking oven 
10) floor conveyor
11) main cooling zone 

   bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567
  POWDER COATING EQUIPMENT PARKERIZING PHOSPHATE COATING EQUIPMENT MAKE:WASTEC(KOREAN) YEAR:2014 2) PROCESS TANK ? LOAD/UNLOAD(#1):SIZE: 800(W) X 1,200(L) X 1,200(H)MM ? ALKALI CLEANER TANK(#2) : SIZE: 800(W) X 1,200(L) X 1,200(H)MM 3) 2-STEP WATER RINSE BATH(#3,4): SIZE: 1,400(W) X 1,200(L) X 1,200(H)MM 4) ACID RINSE BATH(#5): SIZE: 750(W) X 1,200(L) X 1,200(H)MM 5) 2-STEP WATER RINSE BATH(#6,7): 1,400(W) X 1,200(L) X 1,200(H)MM 7) SURFACE CONDITION BATH(#8) :: 750(W) X 1,200(L) 1,200(H)MM 8) COATING BATH(#9,10) : 900(W) X 1,200(L) X 1,200(H)MM 9) HOT WATER RINSE(#11) : 750(W) X 1,200(L) X 1,200(H)MM 10) DRY TANK(#12) : SIZE(INSIDE): 700(W) X 1,200(L) X 1,200(H)MM SIZE(OUTSIDE): 1,300(W) X 2,000(L) X 1,200(H)MM TEMP: 90?~110? 11) CARRIER SYSTEM(#1,2): 1,400(W) X 1,600(L) X 600(H)MM LINE SPEED: TRANSER-0.2~0.6M/SEC LIFTING-0.2~0.5M/SEC 12) HEATING SYSTEM : STEAM HEATER 13) DEGREASER OIL AND WATER SEPARATOR TANK(SUS304): 600(W)X 1,200(L) X 700(H)MM 14) LIQUID AGITATOR 15) ACID BATH FILTER: 4,800~6,000?/HR 16) PIPING SYSTEM 17) BASKET SIZE: 500(W) X 600(L) X 400(H)MM 18) CONDENSING WATER RECOVERY STSTEM 19) ELECTRICAL SYSTEM MAIN POWER: 440V X 3Ø X 60HZ CONTROL POWER: 220V X 1Ø X 60HZ 20) ANTI-POLUTION SYSTEM 21) CARRIER TYPE TANK :: 1,100? SAND BLAST M/C MAKE:SANGA(KOREA) YEAR:2014 CONVEYOR TYPE CYCLE TIME: 10~12SEC CYCLONE & STORAGE TANK: Ø450 X 800(L)MM NOZZLE UNIT CONVEYOR & TURNING UNIT LOADING/UNLOADING UNIT NOZZLE OSCILLATOR DUST COLLECTOR ANTI-AIR POLLUTION EQUIPMENT MAKE:SEONGHWA(KOREA) YEAR:2014 PACKED-TOWER CAP: 230CMM BODY: ?2,000 X 5,000(L)MM STACK: ?650 X 3,000(L)MM TURBO FAN: 230?/MIN X 200MMAQ MOTOR: 20HP COATING AND DRYER MAKE:WASTEC(KOREAN) YEAR:2002 14,500(L) X 4,000(W X 1,500(H) 2) 300KW CAP: 1,080EA/HR 1) PREHEATER DRYER: 3,000(L) X 2,200(W) , 30KW(1SET) BLOWER: 23.3? X 19MMAQ 2) 1ST COATING 1,500(L) X 2,000(W) NOZZLE: 6SET 3) 1ST DRYER: 4,800(L) X 2,200(W), 24KW(2SET) BLOWER: 20? X 17MMAQ(2SET) 4) 2ND COATING NOZZLE: 6SET , 1,500(L) X 2,000(W) 5) 2ND DRYER:: 4,000(L) X 2,000(W), 30KW(1SET) BLOWER: 20? X 17MMAQ(1SET) 6) LOW TEMPERATURE DRYER:: 12,500(L) X 1,000(W), 30KW(3SET) BLOWER: 23.3? X 190MMAQ (3SET) 7) COOLING : 1,000(L) X 800(W) , 10KW(1SET) WASHING EQUIPMENT MAKE:WASTEC(KOREAN) YEAR:2002 7,000(L) X 1,100(W) X 1,800(H) 2) CAP: 1,500EA/HR 3) 100KW 4) R/O SYSTEM 5) ELECTRIC HEATER TYPE DRYER MAKE:HANIL(KOREA) YEAR:2002 SIZE: 1,440(L) X 2,000(W) X 1,530(H) 2) CAP: 1,000EA/HR 3) 40KW 4) CAR AND RACK 2SET 5) HEATER: SCR UNIT TYPE WASHER & BUSH INSERT M/C MAKE:KUMDUK(KOREA) YEAR:2015 TURN TABLE UNIT: 2HEAD UNLOADING LOADER BASE & FRAME & COVER: 75 X 75MM SQUARE PIPE IN LOADER UNIT INDEX TABLE UNIT WASHER LOADER UNIT X 2SET WASHER CHECK UNIT BUSH FEED PRESS UNIT: BUSH 3-PIN PRESS MAKE:KUMDUK(KOREA) YEAR:2015 BASE & FRAME & COVER 6-AXICS MULTI ARTICULATION ROBOT(YASKAWA) MANIPULATOR INDEX TABLE UNIT 3-PIN FEED UNIT 3-PIN PRESS UNIT UNLOADING UNIT 3-PIN HEIGHT CHECK UNIT AIR COMPRESSOR MAKE:TAESAN(KOREA) YEAR:2015 SHAFT POWDER COATING LINE MAKE:MISUNG(KOREA) YEAR:2015 LOADING & UNLOADING UNIT PREHEATER DRY OVEN 45KW(15KW X 3SET) PREHEATER AFTER COOLING ZONE: 4) POWDER AUTOMATIC EQUIPMENT 5) IDLE TRANSFER & INDEX UNIT 6) LOADING TRANSFER & MASKING JIG UNIT 7) OVEN JIG: 16 X 130EA 8) POWDER RECOVERY SYSTEM 9) MAIN BAKING OVEN 10) FLOOR CONVEYOR 11) MAIN COOLING ZONE BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-stainless steel\r\nscaling range 0 - 5000 g, scaling graduation 2 g STAINLESS STEEL\R\NSCALING RANGE 0 - 5000 G, SCALING GRADUATION 2 G
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-anodizing coating (alumite coating) for aluminium parts

1. anodizing line(automatic type) 
make:taewon(korea)
year:2012
cap': 7,000ea/hour 
 
2-1. anodizing line(manual type) 
make:chunwoo(korea)
year:2012
  
2-2. anodizing line(manual type)
make:beomyang(korean)
year:2012

2-3. anodizing line(manual type)-rectifier
make:mirae(korea)
year:2012

2-4. anodizing(manual type)-steam boiler 
make:bustar(korea)
year:2012

2-5. anodizing(manual type)-circulation pump 
make:daeyong(korea)
year:2012

2-6. anodizing(manual type)-circulation pump 
make:gumi(korea)
year:2012

2-7 .anodizing(manual type)-control panel 
make:donglak(korea)
year:2012

3-1. buffing line-polishing machine
 make:bando(korea)
year:2012
cap': 4,000ea/day×3ea 
  
3-2. buffing line-dust collector
 make:buza(korea)
year:2012

3-3. buffing line-air comperssor 
make:atlas(usa)

3-4 buffing line-ultranic cleaner
make:uzu(korea)
year:2012 

6. pure water production equipment
make:bosung(korea)
year:2012
cap': 3?/hr  

8. hydraulic press 
make:dongjin(korea)
year:2013
cap': max.20ton  
stroke: 150mm  
open height: 350mm  
bolster size: 700×400mm  
main motor: 3.75kw  
 
10. anodizing line(electro coating)
 make:daehung(korea)
year:2012

11. auto sand blast m/c 
make:hankook(korea)
year:2012
conveyor type  
conveyor: w900mm  
chamber inner size  :1900×1280×915hmm  
gun: 12set  
jet nozzle: ?3.2mm  

14 .auto sand blast m/c 
make:hankook(korea)
year:2012

15. auto sand blast m/c 
make:hankook(korea)
year:2015
main turntable ?650mm  
6multi table  
8nozzle unit  


bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567

  ANODIZING COATING (ALUMITE COATING) FOR ALUMINIUM PARTS 1. ANODIZING LINE(AUTOMATIC TYPE) MAKE:TAEWON(KOREA) YEAR:2012 CAP': 7,000EA/HOUR 2-1. ANODIZING LINE(MANUAL TYPE) MAKE:CHUNWOO(KOREA) YEAR:2012 2-2. ANODIZING LINE(MANUAL TYPE) MAKE:BEOMYANG(KOREAN) YEAR:2012 2-3. ANODIZING LINE(MANUAL TYPE)-RECTIFIER MAKE:MIRAE(KOREA) YEAR:2012 2-4. ANODIZING(MANUAL TYPE)-STEAM BOILER MAKE:BUSTAR(KOREA) YEAR:2012 2-5. ANODIZING(MANUAL TYPE)-CIRCULATION PUMP MAKE:DAEYONG(KOREA) YEAR:2012 2-6. ANODIZING(MANUAL TYPE)-CIRCULATION PUMP MAKE:GUMI(KOREA) YEAR:2012 2-7 .ANODIZING(MANUAL TYPE)-CONTROL PANEL MAKE:DONGLAK(KOREA) YEAR:2012 3-1. BUFFING LINE-POLISHING MACHINE MAKE:BANDO(KOREA) YEAR:2012 CAP': 4,000EA/DAY×3EA 3-2. BUFFING LINE-DUST COLLECTOR MAKE:BUZA(KOREA) YEAR:2012 3-3. BUFFING LINE-AIR COMPERSSOR MAKE:ATLAS(USA) 3-4 BUFFING LINE-ULTRANIC CLEANER MAKE:UZU(KOREA) YEAR:2012 6. PURE WATER PRODUCTION EQUIPMENT MAKE:BOSUNG(KOREA) YEAR:2012 CAP': 3?/HR 8. HYDRAULIC PRESS MAKE:DONGJIN(KOREA) YEAR:2013 CAP': MAX.20TON STROKE: 150MM OPEN HEIGHT: 350MM BOLSTER SIZE: 700×400MM MAIN MOTOR: 3.75KW 10. ANODIZING LINE(ELECTRO COATING) MAKE:DAEHUNG(KOREA) YEAR:2012 11. AUTO SAND BLAST M/C MAKE:HANKOOK(KOREA) YEAR:2012 CONVEYOR TYPE CONVEYOR: W900MM CHAMBER INNER SIZE :1900×1280×915HMM GUN: 12SET JET NOZZLE: ?3.2MM 14 .AUTO SAND BLAST M/C MAKE:HANKOOK(KOREA) YEAR:2012 15. AUTO SAND BLAST M/C MAKE:HANKOOK(KOREA) YEAR:2015 MAIN TURNTABLE ?650MM 6MULTI TABLE 8NOZZLE UNIT BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-type automat, 30 pcs.,  32  -  70 g\r\nmanually head turning backwards\r\n TYPE AUTOMAT, 30 PCS., 32 - 70 G\R\NMANUALLY HEAD TURNING BACKWARDS\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 3.600 €
Ubicación: Land-surfacer grinder tacchella type 4am:

-table working surface : 900 x 130 [mm],
-table longitudinal traverse (hydraulic movement) : 400 [mm],
-table traversing speeds (automatic) : 0.1 to 10 [m/min],
-table swivel : 360°,
-wheelhead vertical adjustment : 250 [mm],
-wheehead cross traverse : 200 [mm],
-wheelhead swivel : 360°,
-wheelhead tilting above and bellow the horizontal axis : +/- 20°,
-max wheel diameter when mounted : 200 [mm],
-power supply : 380 [v].

dimensions : 1350 (width) x 1200 (depth) x 1600 (height) [mm]
weight : 1150 kg approx.

equipements included :

-magnetic clamping plate – clamping surface : 350 x 150 [mm],
-complete coolant system,
-a set of norton grinding wheels,
-technical documentation and service/users manual,
-electrical plans.

price : 3,600.00€ vat excl. ex works loading on truck included.

shipping in france and europe is possible.

more details or questions on request. SURFACER GRINDER TACCHELLA TYPE 4AM: -TABLE WORKING SURFACE : 900 X 130 [MM], -TABLE LONGITUDINAL TRAVERSE (HYDRAULIC MOVEMENT) : 400 [MM], -TABLE TRAVERSING SPEEDS (AUTOMATIC) : 0.1 TO 10 [M/MIN], -TABLE SWIVEL : 360°, -WHEELHEAD VERTICAL ADJUSTMENT : 250 [MM], -WHEEHEAD CROSS TRAVERSE : 200 [MM], -WHEELHEAD SWIVEL : 360°, -WHEELHEAD TILTING ABOVE AND BELLOW THE HORIZONTAL AXIS : +/- 20°, -MAX WHEEL DIAMETER WHEN MOUNTED : 200 [MM], -POWER SUPPLY : 380 [V]. DIMENSIONS : 1350 (WIDTH) X 1200 (DEPTH) X 1600 (HEIGHT) [MM] WEIGHT : 1150 KG APPROX. EQUIPEMENTS INCLUDED : -MAGNETIC CLAMPING PLATE – CLAMPING SURFACE : 350 X 150 [MM], -COMPLETE COOLANT SYSTEM, -A SET OF NORTON GRINDING WHEELS, -TECHNICAL DOCUMENTATION AND SERVICE/USERS MANUAL, -ELECTRICAL PLANS. PRICE : 3,600.00€ VAT EXCL. EX WORKS LOADING ON TRUCK INCLUDED. SHIPPING IN FRANCE AND EUROPE IS POSSIBLE. MORE DETAILS OR QUESTIONS ON REQUEST.
Vendedor: SARL Kraffter
Año de construcción: usado
Ubicación: Land- cap. approx. 5100 pcs./h,\r\ninclude  \r\ndivider + rounder, type muc, 4 rows, \r\n  doughweightrange 28 - 95 g\r\n  moulding drum 50  -  58 g\r\nintermediate proofer i + ii, moulder, roll cutting device,\r\nsetting machine width 600 mm, max. length 1000 mm CAP. APPROX. 5100 PCS./H,\R\NINCLUDE \R\NDIVIDER + ROUNDER, TYPE MUC, 4 ROWS, \R\N DOUGHWEIGHTRANGE 28 - 95 G\R\N MOULDING DRUM 50 - 58 G\R\NINTERMEDIATE PROOFER I + II, MOULDER, ROLL CUTTING DEVICE,\R\NSETTING MACHINE WIDTH 600 MM, MAX. LENGTH 1000 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 1.850 €
Ubicación: Land-technical data:
-manufacturer. binmak
-type: bmp30
country of origin turkey
-with foot pedal right/left rotation
-consumption: upper shaft 35mm
-recording: lower shaft 30mm groove 8mm
-electric
power
weight approx. 320 kg
shaft diameter 35/30 mm
bottom rollers are driven
-hardened special steel shafts
-1 set of hardened rolls
bottom rollers are driven
-lateral leveling rollers
-horizontal and vertical work
 TECHNICAL DATA: -MANUFACTURER. BINMAK -TYPE: BMP30 COUNTRY OF ORIGIN TURKEY -WITH FOOT PEDAL RIGHT/LEFT ROTATION -CONSUMPTION: UPPER SHAFT 35MM -RECORDING: LOWER SHAFT 30MM GROOVE 8MM -ELECTRIC POWER WEIGHT APPROX. 320 KG SHAFT DIAMETER 35/30 MM BOTTOM ROLLERS ARE DRIVEN -HARDENED SPECIAL STEEL SHAFTS -1 SET OF HARDENED ROLLS BOTTOM ROLLERS ARE DRIVEN -LATERAL LEVELING ROLLERS -HORIZONTAL AND VERTICAL WORK
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Ubicación: Land-type vs310, cap. max. 45 strokes/min.\r\npacking in pre-manufactured bags\r\ninclude automatic input the bags + clips machine\r\n TYPE VS310, CAP. MAX. 45 STROKES/MIN.\R\NPACKING IN PRE-MANUFACTURED BAGS\R\NINCLUDE AUTOMATIC INPUT THE BAGS + CLIPS MACHINE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 2.750 €
Ubicación: Land-technical data:
-manufacturer. binmak
-type: bp50
country of origin turkey
-with foot pedal right/left rotation
-consumption: 50mm nut 14mm
-electric
power
weight approx. 320 kg
shaft diameter 50 mm
bottom rollers are driven
cast iron construction
-hardened special steel shafts
-1 set of hardened rolls
bottom rollers are driven
-lateral leveling rollers
-horizontal and vertical work TECHNICAL DATA: -MANUFACTURER. BINMAK -TYPE: BP50 COUNTRY OF ORIGIN TURKEY -WITH FOOT PEDAL RIGHT/LEFT ROTATION -CONSUMPTION: 50MM NUT 14MM -ELECTRIC POWER WEIGHT APPROX. 320 KG SHAFT DIAMETER 50 MM BOTTOM ROLLERS ARE DRIVEN CAST IRON CONSTRUCTION -HARDENED SPECIAL STEEL SHAFTS -1 SET OF HARDENED ROLLS BOTTOM ROLLERS ARE DRIVEN -LATERAL LEVELING ROLLERS -HORIZONTAL AND VERTICAL WORK
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Ubicación: Land-type hk 60, lifting cap.  100 kg, \r\ntip-height 150 cm, manuell service TYPE HK 60, LIFTING CAP. 100 KG, \R\NTIP-HEIGHT 150 CM, MANUELL SERVICE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-kaiserstuepfler
wp comet stã¼pfler
2-row for hand use
weight range 40 to 80 grams / piece
manual operation
retractable outfeed conveyor
checked dguv v3
connection 400v, 1,1 kw, 16a-cee plug
dimensions: 550 x 420 x 530 mm wxdxh
second-hand machine cleaned and checked KAISERSTUEPFLER WP COMET ST&ATILDE;&FRAC14;PFLER 2-ROW FOR HAND USE WEIGHT RANGE 40 TO 80 GRAMS / PIECE MANUAL OPERATION RETRACTABLE OUTFEED CONVEYOR CHECKED DGUV V3 CONNECTION 400V, 1,1 KW, 16A-CEE PLUG DIMENSIONS: 550 X 420 X 530 MM WXDXH SECOND-HAND MACHINE CLEANED AND CHECKED
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-washing line constructor : viplat
for pe pp
average output 800 kg/h
optional : shredder or grinder, metal detector, belt
stainless steel loading hopper
stainless steel washing and float-sink separating  bath constructed with 3 mm. thick foil in aisi 304, with gearbox, motorized moving rolls with paddles + stainless steel extraction roll  and auger for floating materials + stainless steel bottom extraction auger for sunk material +  motorized with 62 pneumatic valve for mud + manual valve for water outlet
22 kw horizontal centrifuge :shovels, mesh, inlet, decagon, outlet mouth and covers made in  stainless steel , the rest is made in carbon steel  with air sprays  for automatic cleaning of the mesh with a transport system composed by  coupling  mouth in stainless steel, 5,5 kw  fan,  15 meters of 160 mm.diam. in galvanized sheet of 1.2 mm. + n.15  x 160 mm diam. clamps,  2 curves of 160 mm.diam. in galvanized sheet of 2 mm. + 1 curve of 160 mm diam. at 45 ° galvanized sheet of 2 mm.
950 mm cyclone  with tower coupled to centrifuge galvanized sheet of 2 mm.
piping 160 mm. diam.
horizontal centrifuge 22 kw motor :shovels, mesh, inlet, decagon, outlet mouth and covers made in  stainless steel , the rest is made in carbon steel  with air sprays  for automatic cleaning of the mesh with a transport system composed by  coupling  mouth in stainless steel, 5,5 kw  fan,  15 meters of 160 mm.diam. in galvanized sheet of 1.2 mm. + n.10x  160 mm diam. clamps,  2 curves of 160 mm.diam. in galvanized sheet of 2 mm. + 1 curve of 160 mm diam. at 45 ° galvanized sheet of 2 mm.
piping 160 mm. diam.
electric cabinet  for management of the line
storage silo (optional)
the line can be completed with agglomerator + extruder (see options on our website)   WASHING LINE CONSTRUCTOR : VIPLAT FOR PE PP AVERAGE OUTPUT 800 KG/H OPTIONAL : SHREDDER OR GRINDER, METAL DETECTOR, BELT STAINLESS STEEL LOADING HOPPER STAINLESS STEEL WASHING AND FLOAT-SINK SEPARATING  BATH CONSTRUCTED WITH 3 MM. THICK FOIL IN AISI 304, WITH GEARBOX, MOTORIZED MOVING ROLLS WITH PADDLES + STAINLESS STEEL EXTRACTION ROLL  AND AUGER FOR FLOATING MATERIALS + STAINLESS STEEL BOTTOM EXTRACTION AUGER FOR SUNK MATERIAL +  MOTORIZED WITH 62 PNEUMATIC VALVE FOR MUD + MANUAL VALVE FOR WATER OUTLET 22 KW HORIZONTAL CENTRIFUGE :SHOVELS, MESH, INLET, DECAGON, OUTLET MOUTH AND COVERS MADE IN  STAINLESS STEEL , THE REST IS MADE IN CARBON STEEL  WITH AIR SPRAYS  FOR AUTOMATIC CLEANING OF THE MESH WITH A TRANSPORT SYSTEM COMPOSED BY  COUPLING  MOUTH IN STAINLESS STEEL, 5,5 KW  FAN,  15 METERS OF 160 MM.DIAM. IN GALVANIZED SHEET OF 1.2 MM. + N.15  X 160 MM DIAM. CLAMPS,  2 CURVES OF 160 MM.DIAM. IN GALVANIZED SHEET OF 2 MM. + 1 CURVE OF 160 MM DIAM. AT 45 ° GALVANIZED SHEET OF 2 MM. 950 MM CYCLONE  WITH TOWER COUPLED TO CENTRIFUGE GALVANIZED SHEET OF 2 MM. PIPING 160 MM. DIAM. HORIZONTAL CENTRIFUGE 22 KW MOTOR :SHOVELS, MESH, INLET, DECAGON, OUTLET MOUTH AND COVERS MADE IN  STAINLESS STEEL , THE REST IS MADE IN CARBON STEEL  WITH AIR SPRAYS  FOR AUTOMATIC CLEANING OF THE MESH WITH A TRANSPORT SYSTEM COMPOSED BY  COUPLING  MOUTH IN STAINLESS STEEL, 5,5 KW  FAN,  15 METERS OF 160 MM.DIAM. IN GALVANIZED SHEET OF 1.2 MM. + N.10X  160 MM DIAM. CLAMPS,  2 CURVES OF 160 MM.DIAM. IN GALVANIZED SHEET OF 2 MM. + 1 CURVE OF 160 MM DIAM. AT 45 ° GALVANIZED SHEET OF 2 MM. PIPING 160 MM. DIAM. ELECTRIC CABINET  FOR MANAGEMENT OF THE LINE STORAGE SILO (OPTIONAL) THE LINE CAN BE COMPLETED WITH AGGLOMERATOR + EXTRUDER (SEE OPTIONS ON OUR WEBSITE)
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-type infra ee 520/180, model 09/1998\r\n5 decks, 1800 x 2000 mm\r\ncondition as it is, dismantled and loaded  \r\n TYPE INFRA EE 520/180, MODEL 09/1998\R\N5 DECKS, 1800 X 2000 MM\R\NCONDITION AS IT IS, DISMANTLED AND LOADED \R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-ref.-no. 00518
designation of the plant co2 tube laser cutting system
manufacturer blm model adige laser tube built in 2000
6, 5 m loading 3, 5m discharge laser manufacturer rofin sinar 


 REF.-NO. 00518 DESIGNATION OF THE PLANT CO2 TUBE LASER CUTTING SYSTEM MANUFACTURER BLM MODEL ADIGE LASER TUBE BUILT IN 2000 6, 5 M LOADING 3, 5M DISCHARGE LASER MANUFACTURER ROFIN SINAR
Vendedor: tuerer machinery brokers & consulting
Año de construcción: usado
Precio: 17.800 €
Ubicación: Land-mini mono block system MINI MONO BLOCK SYSTEM "MONOMATIC"; CAPACITY: APPROX. 550 BOTTLES / HOUR: STATIONS: -3 X FILLER FOR ROUND BOTTLES, DIAMETER AND HEIGHT VARIABLE. -CAPPER PP 28 S (ANSROLLSCHRAUBVERSCHLUSS) CAPSULE DISTRIBUTOR/SHRINKER -LABELLING UNIT (FRONT / BACK) LOT NO. STAMPER EACH STATION CAN BE INDIVIDUALLY CONTROLLED OR OUT / ON SWITCHED, SO THAT E.G. YOU CAN DO ONLY LABELING WITHOUT FILLING. VIDEO ON YOUTUBE: ABCS://YOUTU.BE/GJA3VZ4ALI0 YEAR 2008, MANUFACTURER: TEM - TOSCANA ENOLOGICA MORI (ITALY) PLANT IS STILL IN OPERATION AND CAN BE GIVEN DUE TO NEW ACQUISITION DUE TO CAPACITY EXPANSION FROM APPROXIMATELY 04/2019
Vendedor: MET Amensis Kellerei
Año de construcción: usado
Ubicación: Land-manufacturer: wemhöner , control: siemens, number of tables: 3, automatisches rüsten: yes, pin-sytem: yes, heating system: elektrisch, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 3200, min.-max. workpiece height in mm: 10-50, max. temperature °c: 200, foil magazin spaces: 16, placing table: 3, through running machine: yes, multifunktionsrahmen: yes, landing opening mm: ca.220, piston diameter: ca.180, querdurchlaufanlage: yes, automatische entleerung: no, folienschneidmaschine hersteller: 2, folienkalander: 16-fach, through running machine: yes, free text: inkl. folienpresse, MANUFACTURER: WEMHöNER , CONTROL: SIEMENS, NUMBER OF TABLES: 3, AUTOMATISCHES RüSTEN: YES, PIN-SYTEM: YES, HEATING SYSTEM: ELEKTRISCH, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 3200, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-50, MAX. TEMPERATURE &DEG;C: 200, FOIL MAGAZIN SPACES: 16, PLACING TABLE: 3, THROUGH RUNNING MACHINE: YES, MULTIFUNKTIONSRAHMEN: YES, LANDING OPENING MM: CA.220, PISTON DIAMETER: CA.180, QUERDURCHLAUFANLAGE: YES, AUTOMATISCHE ENTLEERUNG: NO, FOLIENSCHNEIDMASCHINE HERSTELLER: 2, FOLIENKALANDER: 16-FACH, THROUGH RUNNING MACHINE: YES, FREE TEXT: INKL. FOLIENPRESSE,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: 17.800 €
Ubicación: Land-mini mono block system "monomatic"; capacity: approx. 550 bottles / hour:

stations:
-3 x filler for round bottles, diameter and height variable.
-capper pp 28 s (ansrollschraubverschluss)
capsule distributor/shrinker
-labelling unit (front / back)
lot no. stempler

each station can be individually controlled or out / be switched on, so that e.g. only can be labelled.

video on youtube: abcs://youtu.be/gja3vz4ali0

year 2008, manufacturer: tem - toscana enologica mori (italy)

plant is still in operation and can be given due to new acquisition due to capacity expansion from approximately 04/2019    MINI MONO BLOCK SYSTEM "MONOMATIC"; CAPACITY: APPROX. 550 BOTTLES / HOUR: STATIONS: -3 X FILLER FOR ROUND BOTTLES, DIAMETER AND HEIGHT VARIABLE. -CAPPER PP 28 S (ANSROLLSCHRAUBVERSCHLUSS) CAPSULE DISTRIBUTOR/SHRINKER -LABELLING UNIT (FRONT / BACK) LOT NO. STEMPLER EACH STATION CAN BE INDIVIDUALLY CONTROLLED OR OUT / BE SWITCHED ON, SO THAT E.G. ONLY CAN BE LABELLED. VIDEO ON YOUTUBE: ABCS://YOUTU.BE/GJA3VZ4ALI0 YEAR 2008, MANUFACTURER: TEM - TOSCANA ENOLOGICA MORI (ITALY) PLANT IS STILL IN OPERATION AND CAN BE GIVEN DUE TO NEW ACQUISITION DUE TO CAPACITY EXPANSION FROM APPROXIMATELY 04/2019
Vendedor: MET Amensis Kellerei
Año de construcción: usado
Ubicación: Land-manufacturer: wemhöner, year: 1997, type: mebranenpresse, control: siemens, number of tables: 2, automatisches rüsten: no, pin-sytem: no, heating system: thermoil, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 3200, work piece thickness max mm: 10-50, placing table: 2, through running machine: yes, pressing cylinder: 5, multifunktionsrahmen: yes, landing opening mm: 220, piston diameter: ca.180, steel plate top: yes, längsdurchlauf: yes, automatische entleerung: yes, folienschneidmaschine hersteller: yes, bürstenmaschine hersteller: no, folienkalander: 16 rollen, foil cutter: 2, through running machine: yes, free text: inkl. thermoiol kessel 90 kw/inkl. folienpresse, year :1997 MANUFACTURER: WEMHöNER, YEAR: 1997, TYPE: MEBRANENPRESSE, CONTROL: SIEMENS, NUMBER OF TABLES: 2, AUTOMATISCHES RüSTEN: NO, PIN-SYTEM: NO, HEATING SYSTEM: THERMOIL, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 3200, WORK PIECE THICKNESS MAX MM: 10-50, PLACING TABLE: 2, THROUGH RUNNING MACHINE: YES, PRESSING CYLINDER: 5, MULTIFUNKTIONSRAHMEN: YES, LANDING OPENING MM: 220, PISTON DIAMETER: CA.180, STEEL PLATE TOP: YES, LäNGSDURCHLAUF: YES, AUTOMATISCHE ENTLEERUNG: YES, FOLIENSCHNEIDMASCHINE HERSTELLER: YES, BüRSTENMASCHINE HERSTELLER: NO, FOLIENKALANDER: 16 ROLLEN, FOIL CUTTER: 2, THROUGH RUNNING MACHINE: YES, FREE TEXT: INKL. THERMOIOL KESSEL 90 KW/INKL. FOLIENPRESSE, YEAR :1997
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land--1 cross slide 70.45,
-1 bed 70.12, 
-1 head stock 70-31 (mounted on bearings – last generation) - spindle w12,
-1 manual lever-operated collet quick-closing attachement 70-30.600,
-1 « fr. vögtle » 2 speed motor (1500/3000 rpm), power suppley 380[v],
-1 belt,
-1 multifix type a-a quick-change tool post,
-1 multifix type a-a tool holder.

price vat excluded, on request.

shipping in europe is possible.


more details on request. -1 CROSS SLIDE 70.45, -1 BED 70.12, -1 HEAD STOCK 70-31 (MOUNTED ON BEARINGS – LAST GENERATION) - SPINDLE W12, -1 MANUAL LEVER-OPERATED COLLET QUICK-CLOSING ATTACHEMENT 70-30.600, -1 « FR. VöGTLE » 2 SPEED MOTOR (1500/3000 RPM), POWER SUPPLEY 380[V], -1 BELT, -1 MULTIFIX TYPE A-A QUICK-CHANGE TOOL POST, -1 MULTIFIX TYPE A-A TOOL HOLDER. PRICE VAT EXCLUDED, ON REQUEST. SHIPPING IN EUROPE IS POSSIBLE. MORE DETAILS ON REQUEST.
Vendedor: SARL Kraffter
Año de construcción: usado
Precio: 38.800 EU€
Ubicación: Land-the machine is designed to clean grain for food. it has a manual (dtr). THE MACHINE IS DESIGNED TO CLEAN GRAIN FOR FOOD. IT HAS A MANUAL (DTR).
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-brand: guntner
model: gvh 080.2d/4e(d)
power: 178,7 kw (r404a, ?t = 15 k)
version: extremely low noise
year of manufacture: 2006
number of fans: 4 pcs.
fan diameter: 800 mm.
air flow: 39600 m3/h
tube volume: 103,7 +31,5 l.
dimensions: 9,7 / 1,55 / 1 m.
weight: 1095 kg.

  horizontal ?ondenser from the brand guntner, with capacity of 178.7 kw, released in 2006. the air-cooled condenser is versioning extremely low noise. it is cooled by 4 fans with a diameter of 800 mm.

  due to direct supply from germany and the netherlands, our air-cooled condensers have the best prices, allowing you to pay less. 
 BRAND: GUNTNER MODEL: GVH 080.2D/4E(D) POWER: 178,7 KW (R404A, ?T = 15 K) VERSION: EXTREMELY LOW NOISE YEAR OF MANUFACTURE: 2006 NUMBER OF FANS: 4 PCS. FAN DIAMETER: 800 MM. AIR FLOW: 39600 M3/H TUBE VOLUME: 103,7 +31,5 L. DIMENSIONS: 9,7 / 1,55 / 1 M. WEIGHT: 1095 KG. HORIZONTAL ?ONDENSER FROM THE BRAND GUNTNER, WITH CAPACITY OF 178.7 KW, RELEASED IN 2006. THE AIR-COOLED CONDENSER IS VERSIONING EXTREMELY LOW NOISE. IT IS COOLED BY 4 FANS WITH A DIAMETER OF 800 MM. DUE TO DIRECT SUPPLY FROM GERMANY AND THE NETHERLANDS, OUR AIR-COOLED CONDENSERS HAVE THE BEST PRICES, ALLOWING YOU TO PAY LESS.
Vendedor: Europrom Sp. z o.o.
Año de construcción: usado
Precio: 21.000 EU€
Ubicación: Land-the machine is used in light construction works, replacing manual work. THE MACHINE IS USED IN LIGHT CONSTRUCTION WORKS, REPLACING MANUAL WORK.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-diameter: max.6,35mm, shaft length: 128mm, wire section: 146mm, performance: 110pieces/min.  DIAMETER: MAX.6,35MM, SHAFT LENGTH: 128MM, WIRE SECTION: 146MM, PERFORMANCE: 110PIECES/MIN.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-reactor (1x), make coti srl almé (bergamo), no 0159, new 1996, material stainless steel (304), capacity 2350 ltr, vessel sizes dia. 1200x1680mm, dished bottom, dished top side, top connections (5x), outlet dia. 50mm, working pressure vac/3 bar, test pressure 4,5 bar, half coil jacketed (94 ltr), working pressure 4 bar, test pressure 6 bar, max. temperature 210 degr. c., with paddle stirrer make mariotti & pecini, motor 1,5 kw, 220/380 volt (ex), speed mixing shaft ± 56 rpm, floorspace 1,6x1,6 m, total height 3,3 mreactorsreactors > reactors what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! REACTOR (1X), MAKE COTI SRL ALMé (BERGAMO), NO 0159, NEW 1996, MATERIAL STAINLESS STEEL (304), CAPACITY 2350 LTR, VESSEL SIZES DIA. 1200X1680MM, DISHED BOTTOM, DISHED TOP SIDE, TOP CONNECTIONS (5X), OUTLET DIA. 50MM, WORKING PRESSURE VAC/3 BAR, TEST PRESSURE 4,5 BAR, HALF COIL JACKETED (94 LTR), WORKING PRESSURE 4 BAR, TEST PRESSURE 6 BAR, MAX. TEMPERATURE 210 DEGR. C., WITH PADDLE STIRRER MAKE MARIOTTI & PECINI, MOTOR 1,5 KW, 220/380 VOLT (EX), SPEED MIXING SHAFT ± 56 RPM, FLOORSPACE 1,6X1,6 M, TOTAL HEIGHT 3,3 MREACTORSREACTORS > REACTORS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-diameter: max.6,5mm, shaft length: 102mm, wire section: 128mm, performance: 110pieces/min.  DIAMETER: MAX.6,5MM, SHAFT LENGTH: 102MM, WIRE SECTION: 128MM, PERFORMANCE: 110PIECES/MIN.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-grinder cryogenic laboratory grinding line (1x), make hosokawa alpine ag, type 100-upz, no c-2118593, new 2011, material stainless steel, rotor size dia. 100mm, with grinding track, with hopper, feeding with rotating valve wirbelschnecken-kühler d60x700, motor mill 1,5 kw 400 volt, with variable speed drive, mounted on frame, with switchgear, floorspace 2,0x2,0m, total height 2,4m, weight 690kgsize reduction millsgrinders > size reduction mills what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! GRINDER CRYOGENIC LABORATORY GRINDING LINE (1X), MAKE HOSOKAWA ALPINE AG, TYPE 100-UPZ, NO C-2118593, NEW 2011, MATERIAL STAINLESS STEEL, ROTOR SIZE DIA. 100MM, WITH GRINDING TRACK, WITH HOPPER, FEEDING WITH ROTATING VALVE WIRBELSCHNECKEN-KüHLER D60X700, MOTOR MILL 1,5 KW 400 VOLT, WITH VARIABLE SPEED DRIVE, MOUNTED ON FRAME, WITH SWITCHGEAR, FLOORSPACE 2,0X2,0M, TOTAL HEIGHT 2,4M, WEIGHT 690KGSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-diameter: max.6.5mm, shaft length: 128mm, wire section: 146mm, performance: 110pieces/min.  DIAMETER: MAX.6.5MM, SHAFT LENGTH: 128MM, WIRE SECTION: 146MM, PERFORMANCE: 110PIECES/MIN.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-grinder cryogenic laboratory grinding line (1x), pin disc mill /plate beater, make alpine augsburg, type 160-upz, no 5151.1, new 1988, material stainless steel, rotor size dia. 160 mm, feeding with vibro feeder en messer griesheim wirbelschnecken-kühler d60x700, motor mill 7,5/9,0 kw 380-420/440-480 volt, mounted on frame with filter and ventilator, with switchgear, floorspace 2,5x1,5m, total height 2,7m, weight 1000kgsize reduction millsgrinders > size reduction mills what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! GRINDER CRYOGENIC LABORATORY GRINDING LINE (1X), PIN DISC MILL /PLATE BEATER, MAKE ALPINE AUGSBURG, TYPE 160-UPZ, NO 5151.1, NEW 1988, MATERIAL STAINLESS STEEL, ROTOR SIZE DIA. 160 MM, FEEDING WITH VIBRO FEEDER EN MESSER GRIESHEIM WIRBELSCHNECKEN-KüHLER D60X700, MOTOR MILL 7,5/9,0 KW 380-420/440-480 VOLT, MOUNTED ON FRAME WITH FILTER AND VENTILATOR, WITH SWITCHGEAR, FLOORSPACE 2,5X1,5M, TOTAL HEIGHT 2,7M, WEIGHT 1000KGSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)