35 ofertas

Año de construcción: usado
Precio: 32.950 €
Ubicación: Land-honeycomb/cassettes used for warehouse, matthiessen, 2-bladed version, total 840 cassettes - -:
 
price from site: â?¬32.950.-(net), excluding disassembly, transport, etc.!
 
manufacturer: matthiessen anlagenbau gmbh
type: rfz type apos
construction number (year): 02 / 88
 
system: 2-bladed version
number of honeycomb/cassettes: 840 cassettes, 420 cartridges left wing, 420 cartridges right wing.
dimensions wing: 20 x 8 metres, about 9 meters high.
construction of a grand piano: 14 cassettes high, 30 cassettes long - first 4
vertical lines of ã  14 cassette "small", then 6 vertical rows ã  14
cassette "large", then again 20 vertical rows of ã  14 cassettes 'small'.
at the end of the wing support elements.
honeycomb/cassette "small" dimensions: h b 440 x 500 x l approx. 8000 mm
honeycomb/cassette "big" dimensions: h b 550 x 630 x l approx. 8000 mm
maximum subject load per honeycomb/cassette: probably 3,000 kg
all cassettes with roller roller cassette input.
 
central storage and retrieval unit between the wings, procedure bar rail, max 1500 kp and 3000 kp.
solenoid/battery magnet mannesmann demag type dbm 34, 2,000 kg.
leuze electronic photocell system.
integrated crane (operated by joystick) with 2 hoists and crossbeams.
transport system with drop table.
30 meters can run rails in the floor ripped out and the new
site are cast again.
 
leading delivery table, firmly mounted, electric chain drive,
to promote material on table of the central unit.
base tray 8 x 8 meters.
 
in addition to selected storage space left and right, as well as barriers of
total investment are part of the offer.
total area: 40.00 x 24.00 m
available as of now.
control unit siemens 3ve6201-4cs11zur electronic order processing
condition: used
available: available now
location: room berlin HONEYCOMB/CASSETTES USED FOR WAREHOUSE, MATTHIESSEN, 2-BLADED VERSION, TOTAL 840 CASSETTES - -: PRICE FROM SITE: Â?¬32.950.-(NET), EXCLUDING DISASSEMBLY, TRANSPORT, ETC.! MANUFACTURER: MATTHIESSEN ANLAGENBAU GMBH TYPE: RFZ TYPE APOS CONSTRUCTION NUMBER (YEAR): 02 / 88 SYSTEM: 2-BLADED VERSION NUMBER OF HONEYCOMB/CASSETTES: 840 CASSETTES, 420 CARTRIDGES LEFT WING, 420 CARTRIDGES RIGHT WING. DIMENSIONS WING: 20 X 8 METRES, ABOUT 9 METERS HIGH. CONSTRUCTION OF A GRAND PIANO: 14 CASSETTES HIGH, 30 CASSETTES LONG - FIRST 4 VERTICAL LINES OF à 14 CASSETTE "SMALL", THEN 6 VERTICAL ROWS à 14 CASSETTE "LARGE", THEN AGAIN 20 VERTICAL ROWS OF à 14 CASSETTES 'SMALL'. AT THE END OF THE WING SUPPORT ELEMENTS. HONEYCOMB/CASSETTE "SMALL" DIMENSIONS: H B 440 X 500 X L APPROX. 8000 MM HONEYCOMB/CASSETTE "BIG" DIMENSIONS: H B 550 X 630 X L APPROX. 8000 MM MAXIMUM SUBJECT LOAD PER HONEYCOMB/CASSETTE: PROBABLY 3,000 KG ALL CASSETTES WITH ROLLER ROLLER CASSETTE INPUT. CENTRAL STORAGE AND RETRIEVAL UNIT BETWEEN THE WINGS, PROCEDURE BAR RAIL, MAX 1500 KP AND 3000 KP. SOLENOID/BATTERY MAGNET MANNESMANN DEMAG TYPE DBM 34, 2,000 KG. LEUZE ELECTRONIC PHOTOCELL SYSTEM. INTEGRATED CRANE (OPERATED BY JOYSTICK) WITH 2 HOISTS AND CROSSBEAMS. TRANSPORT SYSTEM WITH DROP TABLE. 30 METERS CAN RUN RAILS IN THE FLOOR RIPPED OUT AND THE NEW SITE ARE CAST AGAIN. LEADING DELIVERY TABLE, FIRMLY MOUNTED, ELECTRIC CHAIN DRIVE, TO PROMOTE MATERIAL ON TABLE OF THE CENTRAL UNIT. BASE TRAY 8 X 8 METERS. IN ADDITION TO SELECTED STORAGE SPACE LEFT AND RIGHT, AS WELL AS BARRIERS OF TOTAL INVESTMENT ARE PART OF THE OFFER. TOTAL AREA: 40.00 X 24.00 M AVAILABLE AS OF NOW. CONTROL UNIT SIEMENS 3VE6201-4CS11ZUR ELECTRONIC ORDER PROCESSING CONDITION: USED AVAILABLE: AVAILABLE NOW LOCATION: ROOM BERLIN
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-volume flow pressure air: 3  m³/min<br />operating pressure air: 3  bar<br />overall output: 400  kg/min<br />spent grains removal time: 10  min<br />material:  1.4301<br />equipment: spent grain compressor manufacturer: mannesmann demag, type: se 31 s<br /> VOLUME FLOW PRESSURE AIR: 3 M³/MIN
OPERATING PRESSURE AIR: 3 BAR
OVERALL OUTPUT: 400 KG/MIN
SPENT GRAINS REMOVAL TIME: 10 MIN
MATERIAL: 1.4301
EQUIPMENT: SPENT GRAIN COMPRESSOR MANUFACTURER: MANNESMANN DEMAG, TYPE: SE 31 S
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine demag dnc ii 175

this demag injection molding machine was a testing machine in a petrochemical factory and afterwards it served several years as a training machine in a local technical university. the machine is used in laboratory test production and training purposes only, not in actual production ever. we dismantled it in 2008 and took it to our warehouse where it is today. it looks to be in good condition.

technical description:
manufacturer: mannesmann demag kunstofftechnik, germany
type: m-type demag dnc ii 175
year: 1981 – very little used
screw diameter: 52 mm, 16d
clamping force: 1750kn
injection volume: 380 cm3
control: microprocessor control system
measurements: 6.6 x 1.5 x 2.2 m (lxwxh)
weight: 7.800 kg
condition: very good – operational
typical products: pipe fittings, house hold articles, technical products   INJECTION MOLDING MACHINE DEMAG DNC II 175 THIS DEMAG INJECTION MOLDING MACHINE WAS A TESTING MACHINE IN A PETROCHEMICAL FACTORY AND AFTERWARDS IT SERVED SEVERAL YEARS AS A TRAINING MACHINE IN A LOCAL TECHNICAL UNIVERSITY. THE MACHINE IS USED IN LABORATORY TEST PRODUCTION AND TRAINING PURPOSES ONLY, NOT IN ACTUAL PRODUCTION EVER. WE DISMANTLED IT IN 2008 AND TOOK IT TO OUR WAREHOUSE WHERE IT IS TODAY. IT LOOKS TO BE IN GOOD CONDITION. TECHNICAL DESCRIPTION: MANUFACTURER: MANNESMANN DEMAG KUNSTOFFTECHNIK, GERMANY TYPE: M-TYPE DEMAG DNC II 175 YEAR: 1981 – VERY LITTLE USED SCREW DIAMETER: 52 MM, 16D CLAMPING FORCE: 1750KN INJECTION VOLUME: 380 CM3 CONTROL: MICROPROCESSOR CONTROL SYSTEM MEASUREMENTS: 6.6 X 1.5 X 2.2 M (LXWXH) WEIGHT: 7.800 KG CONDITION: VERY GOOD – OPERATIONAL TYPICAL PRODUCTS: PIPE FITTINGS, HOUSE HOLD ARTICLES, TECHNICAL PRODUCTS
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 6.800 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-closing force: 80t, weight: 3.7t, operational hours: 20,000h.  CLOSING FORCE: 80T, WEIGHT: 3.7T, OPERATIONAL HOURS: 20,000H.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 3.250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-demag cranes 6,3 t with radio remote control and scale
manufacturer: mannesmann demag fã¶rdertechnik
year of construction: 1992
weight of the crane: 3,744 t
of it by weight. d. cat: 0,977 t
capacity: 6.3 t
span crane: 16300 mm
laufraddurchm. crane: 160 mm
laufraddurchm. cat: 160 mm
number d. wheels crane: 4 pcs.
number d. wheels cat: 4 pcs.
operation mode: radio control
type cat / main hub: ekdh 516 h12 k v3 - 4/1 f-6
additional equipment: built-in scale
 DEMAG CRANES 6,3 T WITH RADIO REMOTE CONTROL AND SCALE MANUFACTURER: MANNESMANN DEMAG F&ATILDE;&PARA;RDERTECHNIK YEAR OF CONSTRUCTION: 1992 WEIGHT OF THE CRANE: 3,744 T OF IT BY WEIGHT. D. CAT: 0,977 T CAPACITY: 6.3 T SPAN CRANE: 16300 MM LAUFRADDURCHM. CRANE: 160 MM LAUFRADDURCHM. CAT: 160 MM NUMBER D. WHEELS CRANE: 4 PCS. NUMBER D. WHEELS CAT: 4 PCS. OPERATION MODE: RADIO CONTROL TYPE CAT / MAIN HUB: EKDH 516 H12 K V3 - 4/1 F-6 ADDITIONAL EQUIPMENT: BUILT-IN SCALE
Vendedor: Maschinenbörse MV GmbH
Año de construcción: usado
Precio: 120 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-built in 1994
control: demag nc4
clamping force: 1500 kn (150 t)
screw diameter: 40 mm
maximum dose: 250 cm3
h.t. number: 8
core: 3
fan: 2
input power: 37 kw
oil: 500 l
map: cf card
pressure up to 250 bar
machine weight: 6000 kg BUILT IN 1994 CONTROL: DEMAG NC4 CLAMPING FORCE: 1500 KN (150 T) SCREW DIAMETER: 40 MM MAXIMUM DOSE: 250 CM3 H.T. NUMBER: 8 CORE: 3 FAN: 2 INPUT POWER: 37 KW OIL: 500 L MAP: CF CARD PRESSURE UP TO 250 BAR MACHINE WEIGHT: 6000 KG
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Precio: 2.750 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand complete cold rolling mill plant
mfc.:	seoul furnace co., alco eng., hanna eng., ramco saelen, mannesmann, 
deuksung eng. co., poscon
built:	1995		strip width:	1350 mm	thickness exit:	0.2 mm
scope of supply:	melting furnace	holding furnace	slab casting machine	
	ingot scalper	band saw	annealing furnace (3)	hot rolling mill 
cold rolling mill
  QTY. 1 SECOND-HAND COMPLETE COLD ROLLING MILL PLANT MFC.: SEOUL FURNACE CO., ALCO ENG., HANNA ENG., RAMCO SAELEN, MANNESMANN, DEUKSUNG ENG. CO., POSCON BUILT: 1995 STRIP WIDTH: 1350 MM THICKNESS EXIT: 0.2 MM SCOPE OF SUPPLY: MELTING FURNACE HOLDING FURNACE SLAB CASTING MACHINE INGOT SCALPER BAND SAW ANNEALING FURNACE (3) HOT ROLLING MILL COLD ROLLING MILL
Vendedor: MET-TECH GMBH
Año de construcción: usado
Precio: 55 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-screw air compressor mannesmanndemag
se 70 s - 27-05-001
shipping time: immediately

number: 27-05-001

manufacturer: mannesmann - demag
type: se 70 s

machine data
year of construction: approx. 1990
l x w x h: approx. 2000 x 1000 x 1400 mm
weight: 860 kg

good general condition

technical data - screw air compressor
operating pressure: 10 psi

power: approx. 40 kw

flow rate: approx. 7.2 m 3/min

operating temperature: approximately 75-100 degrees

sound pressure level: approximately 76 db

ambient temperature range: 3-40 degrees
accessories
â?¢ operating instructions

other accessories on request
price and other specifications on request SCREW AIR COMPRESSOR MANNESMANNDEMAG SE 70 S - 27-05-001 SHIPPING TIME: IMMEDIATELY NUMBER: 27-05-001 MANUFACTURER: MANNESMANN - DEMAG TYPE: SE 70 S MACHINE DATA YEAR OF CONSTRUCTION: APPROX. 1990 L X W X H: APPROX. 2000 X 1000 X 1400 MM WEIGHT: 860 KG GOOD GENERAL CONDITION TECHNICAL DATA - SCREW AIR COMPRESSOR OPERATING PRESSURE: 10 PSI POWER: APPROX. 40 KW FLOW RATE: APPROX. 7.2 M 3/MIN OPERATING TEMPERATURE: APPROXIMATELY 75-100 DEGREES SOUND PRESSURE LEVEL: APPROXIMATELY 76 DB AMBIENT TEMPERATURE RANGE: 3-40 DEGREES ACCESSORIES &ACIRC;?&CENT; OPERATING INSTRUCTIONS OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Precio: 175 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-currently 2 x in stock
krahnhubwerk bj 1980 mannesmann demag p625 h8 2 line
weight 5000 kg
lifting height 8 m
lifting speed 8/0, 8 m / min

used CURRENTLY 2 X IN STOCK KRAHNHUBWERK BJ 1980 MANNESMANN DEMAG P625 H8 2 LINE WEIGHT 5000 KG LIFTING HEIGHT 8 M LIFTING SPEED 8/0, 8 M / MIN USED
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Ubicación: Land-feed pressure: 8 bar<br/>liter capacity: 6 m³/min<br/>total power requirement: 37 kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> FEED PRESSURE: 8 BAR
LITER CAPACITY: 6 M³/MIN
TOTAL POWER REQUIREMENT: 37 KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-needed from spares 1 x mannesmann demag gcm 200 d2/0905 dc motor with brake technical data:<br/>  type: gcm 200 d2/09005<br/>  365 v<br/>  31.5 kw<br/>  95,00 a<br/>  1800 rpm<br/>  60% ed<br/>  brake: 300.0 nm<br/>  <br/>  wave length: 115 mm<br/>  shaft diameter: 55 mm<br/>  <br/>  space lxwxh: ca. 1350 x 500 x 500 mm<br/>  <br/>  total 9 pieces are available - but it isn't everyone with speedometer equipped (5 units available) please enquire before purchase! <br/>  <br/>  the motors are all in similar condition - the attached images are used but only as an example. <br/>  <br/>  changes / errors in the specifications and subject to prior sale! NEEDED FROM SPARES 1 X MANNESMANN DEMAG GCM 200 D2/0905 DC MOTOR WITH BRAKE TECHNICAL DATA:
TYPE: GCM 200 D2/09005
365 V
31.5 KW
95,00 A
1800 RPM
60% ED
BRAKE: 300.0 NM

WAVE LENGTH: 115 MM
SHAFT DIAMETER: 55 MM

SPACE LXWXH: CA. 1350 X 500 X 500 MM

TOTAL 9 PIECES ARE AVAILABLE - BUT IT ISN'T EVERYONE WITH SPEEDOMETER EQUIPPED (5 UNITS AVAILABLE) PLEASE ENQUIRE BEFORE PURCHASE!

THE MOTORS ARE ALL IN SIMILAR CONDITION - THE ATTACHED IMAGES ARE USED BUT ONLY AS AN EXAMPLE.

CHANGES / ERRORS IN THE SPECIFICATIONS AND SUBJECT TO PRIOR SALE!
Vendedor: Weigel – Consulting
Año de construcción: usado
Ubicación: Land-feed pressure: 8 bar<br/>liter capacity: 6 m³/min<br/>total power requirement: 37 kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> FEED PRESSURE: 8 BAR
LITER CAPACITY: 6 M³/MIN
TOTAL POWER REQUIREMENT: 37 KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-used from spare parts<br/>  <br/>  1 x mannesmann demag gch 140 d2/1105 dc motor with brake and speedometer<br/>  <br/>  technical data:<br/>  type: gch 140 d2/1105<br/>  375 v<br/>  31.5 kw<br/>  2800 rpm<br/>  brake: 19-30 nm - please enquire before purchase<br/>  with hübner tdp 0,2 t-4 speedometer<br/>  <br/>  wave length: 45 mm<br/>  shaft diameter: 32 mm<br/>  <br/>  space lxwxh: ca. 950 x 350 x 350 mm<br/>  <br/>  there are 6 pieces<br/>  <br/>  the motors are all in similar condition - the attached images are used but only as an example.<br/>  <br/>  changes / errors in the specifications and subject to prior sale! USED FROM SPARE PARTS

1 X MANNESMANN DEMAG GCH 140 D2/1105 DC MOTOR WITH BRAKE AND SPEEDOMETER

TECHNICAL DATA:
TYPE: GCH 140 D2/1105
375 V
31.5 KW
2800 RPM
BRAKE: 19-30 NM - PLEASE ENQUIRE BEFORE PURCHASE
WITH HüBNER TDP 0,2 T-4 SPEEDOMETER

WAVE LENGTH: 45 MM
SHAFT DIAMETER: 32 MM

SPACE LXWXH: CA. 950 X 350 X 350 MM

THERE ARE 6 PIECES

THE MOTORS ARE ALL IN SIMILAR CONDITION - THE ATTACHED IMAGES ARE USED BUT ONLY AS AN EXAMPLE.

CHANGES / ERRORS IN THE SPECIFICATIONS AND SUBJECT TO PRIOR SALE!
Vendedor: Weigel – Consulting
Año de construcción: usado
Ubicación: Land-volume capacity: 5,63 m³/min<br/>: 1 bar<br/>: 8 bar<br/>turning speeds: 3000 u/min<br/>engine output: 37 kw<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions: 1,35 x 1,05 x 1,43 m<br/><br/><br/><br/><br/> VOLUME CAPACITY: 5,63 M³/MIN
: 1 BAR
: 8 BAR
TURNING SPEEDS: 3000 U/MIN
ENGINE OUTPUT: 37 KW
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS: 1,35 X 1,05 X 1,43 M




Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-used from spare parts<br/>  <br/>  1 x mannesmann demag gch 140 d2/1105 dc motor with brake and speedometer<br/>  <br/>  technical data:<br/>  type: gch 140 d2/1105<br/>  375 v<br/>  31.5 kw<br/>  2800 rpm<br/>  brake: 19-30 nm - please enquire before purchase<br/>  with hübner tdp 0,2 t-4 tachometer warning but lacks the connector (tachometer - motor) wavelength: 45 mm<br/>  shaft diameter: 32 mm<br/>  <br/>  space lxwxh: ca. 950 x 350 x 350 mm<br/>  <br/>  total 2 pcs available<br/>  <br/>  the motors are all in similar condition - the attached images are used but only as an example.<br/>  <br/>  changes / errors in the specifications and subject to prior sale! USED FROM SPARE PARTS

1 X MANNESMANN DEMAG GCH 140 D2/1105 DC MOTOR WITH BRAKE AND SPEEDOMETER

TECHNICAL DATA:
TYPE: GCH 140 D2/1105
375 V
31.5 KW
2800 RPM
BRAKE: 19-30 NM - PLEASE ENQUIRE BEFORE PURCHASE
WITH HüBNER TDP 0,2 T-4 TACHOMETER WARNING BUT LACKS THE CONNECTOR (TACHOMETER - MOTOR) WAVELENGTH: 45 MM
SHAFT DIAMETER: 32 MM

SPACE LXWXH: CA. 950 X 350 X 350 MM

TOTAL 2 PCS AVAILABLE

THE MOTORS ARE ALL IN SIMILAR CONDITION - THE ATTACHED IMAGES ARE USED BUT ONLY AS AN EXAMPLE.

CHANGES / ERRORS IN THE SPECIFICATIONS AND SUBJECT TO PRIOR SALE!
Vendedor: Weigel – Consulting
Año de construcción: usado
Ubicación: Land-used from spare parts<br/>  <br/>  1 x mannesmann demag gch 125 d2 1301 gleichstromotor with brake technical data:<br/>  type: gch 125 d2 1301<br/>  365 v<br/>  13.3 a<br/>  4,0 kw<br/>  2800 rpm with brake 13.0 nm<br/>  with hübner tdp 0,2 lt-4 speedometer<br/>  <br/>  wavelength: approx. 42 mm<br/>  shaft diameter: 32 mm<br/>  <br/>  space lxwxh: approx. 850 x 230 x 320 mm USED FROM SPARE PARTS

1 X MANNESMANN DEMAG GCH 125 D2 1301 GLEICHSTROMOTOR WITH BRAKE TECHNICAL DATA:
TYPE: GCH 125 D2 1301
365 V
13.3 A
4,0 KW
2800 RPM WITH BRAKE 13.0 NM
WITH HüBNER TDP 0,2 LT-4 SPEEDOMETER

WAVELENGTH: APPROX. 42 MM
SHAFT DIAMETER: 32 MM

SPACE LXWXH: APPROX. 850 X 230 X 320 MM
Vendedor: Weigel – Consulting
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-used mannesmann - demag chain hoist

1,000 + 2,000 kg payload +++ please request our illustrated range 611 +++  USED MANNESMANN - DEMAG CHAIN HOIST 1,000 + 2,000 KG PAYLOAD +++ PLEASE REQUEST OUR ILLUSTRATED RANGE 611 +++
Vendedor: ABDELGHANY - Maschinenhandel
Año de construcción: usado
Ubicación: Land-2 piece very well-preserved demag geared motors with brake.<br/>  3.0 kw, n 2 = 34 rpm. with brake; very good 2 PIECE VERY WELL-PRESERVED DEMAG GEARED MOTORS WITH BRAKE.
3.0 KW, N 2 = 34 RPM. WITH BRAKE; VERY GOOD
Vendedor: Rodenbach + Wolf GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-mannesmann demag compressor

general repair 2004
flow rate: 39.5 m â³/min, 2150 m â³/h
suction pressure: 1 bar
max pressure: 10 bar
speed: 1500 rpm
engine power: 250kw
pressure: 8.5 bar

MANNESMANN DEMAG COMPRESSOR GENERAL REPAIR 2004 FLOW RATE: 39.5 M &ACIRC;&SUP3;/MIN, 2150 M &ACIRC;&SUP3;/H SUCTION PRESSURE: 1 BAR MAX PRESSURE: 10 BAR SPEED: 1500 RPM ENGINE POWER: 250KW PRESSURE: 8.5 BAR
Vendedor: Pelmar Engineering Germany GmbH
Año de construcción: usado
Ubicación: Land-<b>properties:</b>

used wheels car converter of manufacturer mannesmann demag
feet must be ordered separately
condition: fully functional with traces of use
ideal for fast material handling
expertly disassembled and packed
7 stk. in stock
price per pcs.

<b>converter</b>

converter with chains or straps gently raise the goods and settle it gently on the goal line. this includes both routes leave during recording and weaning shortly.

<b>technical data:

mass of the roller</b>
overall length: 935mm
total width: 920 mm

<b>information on the role</b>
clamping length: 430 mm
diameter approx: 50 mm
material: steel, galvanised

<b>information on the framework</b>
frame height: 135 mm
frame width: 30 mm
material: steel

<b>tailor-made solutions for your intralogistics</b>

we are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! gladly we will create you an individual offer or advise on the design or assembly questions. just let your needs and local conditions us to.

take advantage of our many years of experience and our excellent network of professionals. for companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

together, we will work out ways to optimize your process and material flow cost effectively and sustainably. we can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.  PROPERTIES: USED WHEELS CAR CONVERTER OF MANUFACTURER MANNESMANN DEMAG FEET MUST BE ORDERED SEPARATELY CONDITION: FULLY FUNCTIONAL WITH TRACES OF USE IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED 7 STK. IN STOCK PRICE PER PCS. CONVERTER CONVERTER WITH CHAINS OR STRAPS GENTLY RAISE THE GOODS AND SETTLE IT GENTLY ON THE GOAL LINE. THIS INCLUDES BOTH ROUTES LEAVE DURING RECORDING AND WEANING SHORTLY. TECHNICAL DATA: MASS OF THE ROLLER OVERALL LENGTH: 935MM TOTAL WIDTH: 920 MM INFORMATION ON THE ROLE CLAMPING LENGTH: 430 MM DIAMETER APPROX: 50 MM MATERIAL: STEEL, GALVANISED INFORMATION ON THE FRAMEWORK FRAME HEIGHT: 135 MM FRAME WIDTH: 30 MM MATERIAL: STEEL TAILOR-MADE SOLUTIONS FOR YOUR INTRALOGISTICS WE ARE YOUR COMPETENT PARTNER FOR ROLLER CONVEYORS, BELT LIFTS, INCLINED CONVEYORS OR TELESCOPES TO THE LOADING AND UNLOADING OF GOODS! GLADLY WE WILL CREATE YOU AN INDIVIDUAL OFFER OR ADVISE ON THE DESIGN OR ASSEMBLY QUESTIONS. JUST LET YOUR NEEDS AND LOCAL CONDITIONS US TO. TAKE ADVANTAGE OF OUR MANY YEARS OF EXPERIENCE AND OUR EXCELLENT NETWORK OF PROFESSIONALS. FOR COMPANIES OF VARIOUS INDUSTRIES, SUCH AS: LOGISTICS, PHARMACEUTICAL INDUSTRY, CRAFTS OR THE ELECTRONICS INDUSTRY WE HAVE ALREADY SUCCESSFULLY IMPLEMENTED PROJECTS. TOGETHER, WE WILL WORK OUT WAYS TO OPTIMIZE YOUR PROCESS AND MATERIAL FLOW COST EFFECTIVELY AND SUSTAINABLY. WE CAN OFFER YOU EVEN FULLY AUTOMATIC SORTING EQUIPMENT OR ADDITIONAL COMPONENTS SUCH AS PICKING RACKS OR CONTAINERS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Ubicación: Land-DE Germany, 45138 Essen
Vendedor: Frank Sprengel Metallbearbeitungsmaschinen
Año de construcción: usado
Ubicación: Land-manufacturer mannesmann demag kunstofftechnik, germany m-type demag dnc ii 175. year made1981 – very little used. technical data: screw diameter 52 mm, 16d, clamping force 1750kn, injection volume 380 cm3, microprosessor control system. total length 6.6m, height 2.2 m, width 1.5 m, weight 7800 kg
condition very good operational. used in laboratory test production and training purposes only, not in actual production ever.
other information typical products: pipe fittings, house hold articles, technical products MANUFACTURER MANNESMANN DEMAG KUNSTOFFTECHNIK, GERMANY M-TYPE DEMAG DNC II 175. YEAR MADE1981 – VERY LITTLE USED. TECHNICAL DATA: SCREW DIAMETER 52 MM, 16D, CLAMPING FORCE 1750KN, INJECTION VOLUME 380 CM3, MICROPROSESSOR CONTROL SYSTEM. TOTAL LENGTH 6.6M, HEIGHT 2.2 M, WIDTH 1.5 M, WEIGHT 7800 KG CONDITION VERY GOOD OPERATIONAL. USED IN LABORATORY TEST PRODUCTION AND TRAINING PURPOSES ONLY, NOT IN ACTUAL PRODUCTION EVER. OTHER INFORMATION TYPICAL PRODUCTS: PIPE FITTINGS, HOUSE HOLD ARTICLES, TECHNICAL PRODUCTS
Vendedor: KKT oy
Año de construcción: usado
Precio: 6.519 PLN
Ubicación: Land-cabinet crane control inverter dpu demag
cabinet dimensions 200x125x40 cm

contents visible on the photo, among others:
- inverter dematik mannesmann demag ac 80
  dpu 415v 080 c 00
- power supply siemens 20 a
- traco power supplies 5 a - 3 pcs.
- cartridge fuse bm
- fuses

there is a possibility to sell in parts   CABINET CRANE CONTROL INVERTER DPU DEMAG CABINET DIMENSIONS 200X125X40 CM CONTENTS VISIBLE ON THE PHOTO, AMONG OTHERS: - INVERTER DEMATIK MANNESMANN DEMAG AC 80 DPU 415V 080 C 00 - POWER SUPPLY SIEMENS 20 A - TRACO POWER SUPPLIES 5 A - 3 PCS. - CARTRIDGE FUSE BM - FUSES THERE IS A POSSIBILITY TO SELL IN PARTS
Vendedor: Aman Janusz Mlynarczyk
Año de construcción: usado
Ubicación: Land-individual items can be sold!!!!!!
qty. 1 second-hand melting, casting and rolling mill plant
mfc.:	cyrus gmbh, abb ag, kreimag, kre-ma gmbh, a. wertli ag, scheuch gmbh,
mannesmann demag ag, kobe, ebner gmbh, sonoda, daejin, ungerer gmbh, 
sundwig gmbh, ys tec, tsunoda, hongkong
built:	1973, 1984, 1987, 1995, 2000, 2012, 2014
material dimensions:	width:	275 – 450 mm		thickness:	15 – 1.5 mm
			width:	250 – 435 mm		thickness:	3.5 – 0.1 mm
			width:	max. 200 mm	thickness:	2.0 – 0.05 mm

scope of supply:
no.	description				qty.
1	hcc(melting & casting)		2
2	4-high rough rolling mill		1
3	bell furnace				3
4	4-high finishing rolling mill		1
5	pickling line				1
6	level & shearing machine		1
7	bright annealing furnace		1
8	sider trimmer machine		1
9	slitter machine			1
10	tension leveling machine		1
11	12-high cold rolling mill		1
12	degreasing line			1
13	cathod shearing machine		1
14	roll grinder				1
15	balling machine			1
16	milling machine			1
17	etc (packing machine ? 16)		19
18	electrical equipment	tr,acb,vcb,mccb
19	cutter grinder				1
20	vision tester				1
  INDIVIDUAL ITEMS CAN BE SOLD!!!!!! QTY. 1 SECOND-HAND MELTING, CASTING AND ROLLING MILL PLANT MFC.: CYRUS GMBH, ABB AG, KREIMAG, KRE-MA GMBH, A. WERTLI AG, SCHEUCH GMBH, MANNESMANN DEMAG AG, KOBE, EBNER GMBH, SONODA, DAEJIN, UNGERER GMBH, SUNDWIG GMBH, YS TEC, TSUNODA, HONGKONG BUILT: 1973, 1984, 1987, 1995, 2000, 2012, 2014 MATERIAL DIMENSIONS: WIDTH: 275 – 450 MM THICKNESS: 15 – 1.5 MM WIDTH: 250 – 435 MM THICKNESS: 3.5 – 0.1 MM WIDTH: MAX. 200 MM THICKNESS: 2.0 – 0.05 MM SCOPE OF SUPPLY: NO. DESCRIPTION QTY. 1 HCC(MELTING & CASTING) 2 2 4-HIGH ROUGH ROLLING MILL 1 3 BELL FURNACE 3 4 4-HIGH FINISHING ROLLING MILL 1 5 PICKLING LINE 1 6 LEVEL & SHEARING MACHINE 1 7 BRIGHT ANNEALING FURNACE 1 8 SIDER TRIMMER MACHINE 1 9 SLITTER MACHINE 1 10 TENSION LEVELING MACHINE 1 11 12-HIGH COLD ROLLING MILL 1 12 DEGREASING LINE 1 13 CATHOD SHEARING MACHINE 1 14 ROLL GRINDER 1 15 BALLING MACHINE 1 16 MILLING MACHINE 1 17 ETC (PACKING MACHINE ? 16) 19 18 ELECTRICAL EQUIPMENT TR,ACB,VCB,MCCB 19 CUTTER GRINDER 1 20 VISION TESTER 1
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-mannesmann demag works kbf90a12/4. please contact me for more photos and information.
 MANNESMANN DEMAG WORKS KBF90A12/4. PLEASE CONTACT ME FOR MORE PHOTOS AND INFORMATION.
Vendedor: Intermotor LTD
Año de construcción: usado
Ubicación: Land-qty. 2 second-hand billet automatic stacker including packaging unit
mfc.:		mannesmann demag sack		 

each unit consist of:
layer removing device	transportation of billet layer within the area of stacking table
	qty. 5 stacking cars			driveway approx.: 	600 mm
	transporting speed:	0.1 m/sec.	
stop device	to remove the billet layers in front of the stacking lift table
	qty. 5 stop levers 			bearing blocks	
tension rods				pneumatic cylinder
stacking device	for stacking of transferred layers to the package
	stacking table 			stroke:		400 mm
	package dimensions:		300 ? 600 x 200 ? 400 mm	-  w x h
	package weight:		max. 6000 kg
 QTY. 2 SECOND-HAND BILLET AUTOMATIC STACKER INCLUDING PACKAGING UNIT MFC.: MANNESMANN DEMAG SACK EACH UNIT CONSIST OF: LAYER REMOVING DEVICE TRANSPORTATION OF BILLET LAYER WITHIN THE AREA OF STACKING TABLE QTY. 5 STACKING CARS DRIVEWAY APPROX.: 600 MM TRANSPORTING SPEED: 0.1 M/SEC. STOP DEVICE TO REMOVE THE BILLET LAYERS IN FRONT OF THE STACKING LIFT TABLE QTY. 5 STOP LEVERS BEARING BLOCKS TENSION RODS PNEUMATIC CYLINDER STACKING DEVICE FOR STACKING OF TRANSFERRED LAYERS TO THE PACKAGE STACKING TABLE STROKE: 400 MM PACKAGE DIMENSIONS: 300 ? 600 X 200 ? 400 MM - W X H PACKAGE WEIGHT: MAX. 6000 KG
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-mannesmann demag ru 1pk max.load 300kg. please contact me for more photos and information. MANNESMANN DEMAG RU 1PK MAX.LOAD 300KG. PLEASE CONTACT ME FOR MORE PHOTOS AND INFORMATION.
Vendedor: Intermotor LTD
Año de construcción: usado
Ubicación: Land-1 piece screw compressor, 8.7 m³/min, 8 bar, 55 kw 1 PIECE SCREW COMPRESSOR, 8.7 M&SUP3;/MIN, 8 BAR, 55 KW
Vendedor: AVC GmbH
Año de construcción: usado
Ubicación: Land-cleaning bank: billet size: dia. 160 mm x 9.15 m, rotation angle: 90°,
stacking & packing device: billet size: square: 50-160 mm; length: 2.5 - 9.0 m,  CLEANING BANK: BILLET SIZE: DIA. 160 MM X 9.15 M, ROTATION ANGLE: 90°, STACKING & PACKING DEVICE: BILLET SIZE: SQUARE: 50-160 MM; LENGTH: 2.5 - 9.0 M,
Vendedor: MET-TECH GMBH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MANNESMANN types: