126 ofertas

Año de construcción: usado
Ubicación: Land-year of construction: 2011
hours of operation machine: 29.271 h (07.12.2018)
hours of operation a laser: 28.325 h (07.12.2018)
hours of operation a beam: 12.964 h (07.12.2018)
laser power: 4000 watts
working range: 2500 x 1250 x 115 mm
control: siemens sinumerik 840 d
max steel approximately: 20 mm
max stainless steel approx.: 15 mm
max aluminium approx.: 8 mm
space requirement approx.: 8660 x 6110 x 2700 mm
approximate weight machine: 7.300 kg
power consumption: 88 kva

standard equipment
-closed machine frame with integrated laser unit
-automatic pallet changer
bdzexgpbdj
-tft color display
-position laser diode
-spraying device
-motion unit for high-precision machining
-additional highly dynamic axis yp
-drives with maintenance-free ac servo motors
-closed beam delivery
-conveyor for small parts and waste
-nitroline
-flyline
-infeed end detection

trumpf laser
-co2 laser truflow 4000
-high-frequency excitation
-maintenance-friendly turbo centrifugal blower
-gas mixer (integrated)
-laser power control
-logbook function laser

cutting head
-laserschneidopf with 5 "lens
-laserschneidopf with 7.5 "lens
-universal quick exchange device
-controlline

control
-control sinumerik 840 d
-automatic switch-off
-contourline
-sprintline
-teleservice
-microweld
-rj45 network connector
-3.5 "floppy disk drive
-network connection via tele-diagnosis

security
-ce marking
-light barrier
-multi-chamber exhaust system
-compact collector
-programming
-shop floor programming advanced machine equipment
-laser cutting head 3.75 "

technical data subject to change - subject to prior sale
the operating hours for delivery of the machine may differ from the hours recorded in the offer YEAR OF CONSTRUCTION: 2011 HOURS OF OPERATION MACHINE: 29.271 H (07.12.2018) HOURS OF OPERATION A LASER: 28.325 H (07.12.2018) HOURS OF OPERATION A BEAM: 12.964 H (07.12.2018) LASER POWER: 4000 WATTS WORKING RANGE: 2500 X 1250 X 115 MM CONTROL: SIEMENS SINUMERIK 840 D MAX STEEL APPROXIMATELY: 20 MM MAX STAINLESS STEEL APPROX.: 15 MM MAX ALUMINIUM APPROX.: 8 MM SPACE REQUIREMENT APPROX.: 8660 X 6110 X 2700 MM APPROXIMATE WEIGHT MACHINE: 7.300 KG POWER CONSUMPTION: 88 KVA STANDARD EQUIPMENT -CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT -AUTOMATIC PALLET CHANGER BDZEXGPBDJ -TFT COLOR DISPLAY -POSITION LASER DIODE -SPRAYING DEVICE -MOTION UNIT FOR HIGH-PRECISION MACHINING -ADDITIONAL HIGHLY DYNAMIC AXIS YP -DRIVES WITH MAINTENANCE-FREE AC SERVO MOTORS -CLOSED BEAM DELIVERY -CONVEYOR FOR SMALL PARTS AND WASTE -NITROLINE -FLYLINE -INFEED END DETECTION TRUMPF LASER -CO2 LASER TRUFLOW 4000 -HIGH-FREQUENCY EXCITATION -MAINTENANCE-FRIENDLY TURBO CENTRIFUGAL BLOWER -GAS MIXER (INTEGRATED) -LASER POWER CONTROL -LOGBOOK FUNCTION LASER CUTTING HEAD -LASERSCHNEIDOPF WITH 5 "LENS -LASERSCHNEIDOPF WITH 7.5 "LENS -UNIVERSAL QUICK EXCHANGE DEVICE -CONTROLLINE CONTROL -CONTROL SINUMERIK 840 D -AUTOMATIC SWITCH-OFF -CONTOURLINE -SPRINTLINE -TELESERVICE -MICROWELD -RJ45 NETWORK CONNECTOR -3.5 "FLOPPY DISK DRIVE -NETWORK CONNECTION VIA TELE-DIAGNOSIS SECURITY -CE MARKING -LIGHT BARRIER -MULTI-CHAMBER EXHAUST SYSTEM -COMPACT COLLECTOR -PROGRAMMING -SHOP FLOOR PROGRAMMING ADVANCED MACHINE EQUIPMENT -LASER CUTTING HEAD 3.75 " TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE THE OPERATING HOURS FOR DELIVERY OF THE MACHINE MAY DIFFER FROM THE HOURS RECORDED IN THE OFFER
Vendedor: mteg GmbH
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>sm-1256</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic 2000r</td> </tr> <tr> <td>year:</td> <td>2001</td> </tr> <tr> <td>working area:</td> <td>1270 x 1270 mm</td> </tr> <tr> <td>punching force:</td> <td>18 to</td> </tr> <tr> <td>control:</td> <td>bosch typ 3</td> </tr> <tr> <td>working hour:</td> <td>33.096 h</td> </tr> <tr> <td>max. sheet thick.:</td> <td>6,4 mm</td> </tr> <tr> <td>max. material weight:</td> <td>75 kg</td> </tr> <tr> <td>max. tool diameter:</td> <td>76 mm</td> </tr> <tr> <td>max. speed:</td> <td>90/60/108 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>5100 mm</td> </tr> <tr> <td>width:</td> <td>5800 mm</td> </tr> <tr> <td>height:</td> <td>2070 mm</td> </tr> <tr> <td>weight:</td> <td>9200 kg</td> </tr> </tbody> </table> <br> <h3> <strong>standard configuration</strong> </h3>\n \n\n	<ul>\n	<li> <strong> </strong> </h3>stable c-frame</li>\n	<li>coordinate guide with integrated linear magazine, 11 tool stations for tools and clamps</li>\n	<li>drives: maintenance-free, digital three-phase servo motors</li>\n	<li>punching head: hydraulic system with closed control loop, single tool adapter, 360° rotation of all tools</li>\n	<li>automatic repositioning device with programmable presser foot </li>\n	<li>vacuum slug removal</li>\n	<li>swarf bucket</li>\n	<li>brush tables</li>\n	<li>parts chute 200 x 200 mm and sorting of parts into 2 containers</li>\n	<li>2 parts containers</li>\n	<li>controller bosch type 3, activity-oriented user interface, online help,</li>\n	<li>diagnostic functions, 3.5 disk drive, bnc/rj45 connection, tft color screen 10.4</li>\n	<li>graphic programming tops 2000</li>\n	<li>safety: ce marking, multi-beam light barriers, rapid hydraulic shutdown</li>\n</ul>\n \n<h3> <strong>additional equipment</strong> </h3>\n \n\n	<ul>\n	<li> <strong> </strong> </h3>preparation multitool</li>\n	<li>tapping</li>\n	<li>marking / rapid beading</li>\n	<li>tool spray lubrication</li>\n	<li>start post</li>\n	<li>anti-vibration installation</li>\n	<li>table extension</li>\n</ul>\n

TECHNICAL DATA

ITEM NUMBER: SM-1256
MANUFACTURER: TRUMPF
TYPE: TRUMATIC 2000R
YEAR: 2001
WORKING AREA: 1270 X 1270 MM
PUNCHING FORCE: 18 TO
CONTROL: BOSCH TYP 3
WORKING HOUR: 33.096 H
MAX. SHEET THICK.: 6,4 MM
MAX. MATERIAL WEIGHT: 75 KG
MAX. TOOL DIAMETER: 76 MM
MAX. SPEED: 90/60/108 M/MIN
POSITIONING ACCURACY: +/- 0,1 MM
LENGTH: 5100 MM
WIDTH: 5800 MM
HEIGHT: 2070 MM
WEIGHT: 9200 KG

STANDARD CONFIGURATION

\N \N\N
    \N
  • STABLE C-FRAME
  • \N
  • COORDINATE GUIDE WITH INTEGRATED LINEAR MAGAZINE, 11 TOOL STATIONS FOR TOOLS AND CLAMPS
  • \N
  • DRIVES: MAINTENANCE-FREE, DIGITAL THREE-PHASE SERVO MOTORS
  • \N
  • PUNCHING HEAD: HYDRAULIC SYSTEM WITH CLOSED CONTROL LOOP, SINGLE TOOL ADAPTER, 360° ROTATION OF ALL TOOLS
  • \N
  • AUTOMATIC REPOSITIONING DEVICE WITH PROGRAMMABLE PRESSER FOOT
  • \N
  • VACUUM SLUG REMOVAL
  • \N
  • SWARF BUCKET
  • \N
  • BRUSH TABLES
  • \N
  • PARTS CHUTE 200 X 200 MM AND SORTING OF PARTS INTO 2 CONTAINERS
  • \N
  • 2 PARTS CONTAINERS
  • \N
  • CONTROLLER BOSCH TYPE 3, ACTIVITY-ORIENTED USER INTERFACE, ONLINE HELP,
  • \N
  • DIAGNOSTIC FUNCTIONS, 3.5 DISK DRIVE, BNC/RJ45 CONNECTION, TFT COLOR SCREEN 10.4
  • \N
  • GRAPHIC PROGRAMMING TOPS 2000
  • \N
  • SAFETY: CE MARKING, MULTI-BEAM LIGHT BARRIERS, RAPID HYDRAULIC SHUTDOWN
  • \N
\N \N

ADDITIONAL EQUIPMENT

\N \N\N
    \N
  • PREPARATION MULTITOOL
  • \N
  • TAPPING
  • \N
  • MARKING / RAPID BEADING
  • \N
  • TOOL SPRAY LUBRICATION
  • \N
  • START POST
  • \N
  • ANTI-VIBRATION INSTALLATION
  • \N
  • TABLE EXTENSION
  • \N
\N
Vendedor: I-H&S GmbH
Año de construcción: usado
Precio: 7.080 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 20% !!!


universal cylindrical grinding machine mso fm 165/500
with internal grinding attachment

manufacturer: mso
type: fm 165 / 500
mach.-nr.: m 26214
year of construction: ??? / 11.2018 tüp.
comm.-nr.: 3990400/009
stock-nr.: 1908

+++ special price: old 8.850,- € | now 7.080,- €
+++ all prices are shown without taxes (net price)

 
the machine is suitable for:

* external grinding
* internal grinding
* surface grinding
* taper grinding
* chamfering
* angled flat grinding

 
technical data

(according to manufacturer)

centre height: 180 mm
swing-Ø: 360 mm
grinding length: 500 mm
between centres: 550 mm

grinding wheel

diameter: 300 mm
bore-Ø: 127 mm
largest width of grinding wheel for plunge grinding: 40 mm
largest total width of a grinding wheel set: 80 mm
largest sum of single widths: 40 mm
grinding wheel speed: 1.650 / 2.150 rpm = 30 m/s

grinding head

largest grinding head hub: 209 mm
largest hub by hand wheel: 67 mm
additional hub: 142 mm
autom. interval feed: 0,005 – 0,020 mm
feed by one revolution of hand wheel: rough 25 mm / fine 2,5 mm
feed by one hand wheel graduation mark: 0,0025 mm
setting by tip-switch regarding diameter: 0,00125 / 0,0025 mm

internal grinding attachment

largest distance from front edge spindle headstock to grinding spidnle carrier: 750 mm
bore for carrying the spindle: 60 mm
largest grindable bore: 125 mm / maybe larger

headstock spindle

6 work-piece speeds, adjustable: 40 – 305 rpm
rotatability of headstock spindle against the grinding wheel: 90°
spindle cone or inner taper of headstock spindle: mk 4

tailstock

inner cone of quill: mk 3
quill travel: 20 mm

table

largest table incline: 10°
largest cone angle: 20°
table speed: 0,2 – 1,1 m/min
rough travel by hand wheel: 1 revolution 25 mm, 1 graduation mark 0,25 mm
fine travel by hand wheel: 1 revolution 2,5 mm, 1 graduation mark 0,025 mm

total connected load: ca. 4 kw
weight: ca. 1.800 kg
standing area: w 2,10 x d 1,20 x h 1,60 m
color: blue / grey-white / red

 
features

* rotatable internal grinding attachment
* manual or automatic operation
* self-feeding up to 0-limit
* grinding wheel fine adjustment 0,00125 / 0,0025
* automatic feed works as piercing feed, without feed, table-dependant feed
* only right / left and right / only left
* upper table for tamper grinding with fine feed and measuring clock
* bedway is lubricated by re-oil
* tailstock can be activated by mechanical lever
* attachment with measuring clock for table pivoting up to 10°
* headstock spindle pivotable up to 360°
* grinding head pivotable up to 360°, in 2 layers
* grinding head two speeds
* free-standing liquid cooling system, mobile
* splash guards
* 3 pieces grinding wheel flanges with wheels
* internal grinding spindle with cone attachment and extraction threading
* internal grinding spindle with fastening clamp attachment and fastening clamp Ø 6 mm
* internal cooling through work spindle on work piece during internal grinding
* 2. driving pulley to adjust the internal grinding spindle rmp setting
* adjustable straight and radial matching device with quick-fastening lever
* adjustable dressing device for grinding wheel, at tailstock
* adjustable side and diagonal dressing device with scale, for grinding wheel, with quick-release lever
* open lunette, adjustable
* three-chuck-fastening buffer forkhardt Ø 125 mm, with spindle receiver flange
* collet attachment for direct spindle reception
* fastening clamp device with spindle recevier
* 10 collet chucks for collet from Ø 3 mm – 22 mm
* 5 vibration-dampening standing bars
* of internal grinding spindles in various sizes
* operating manual

the seller informed us this has been used in a teaching environment.


* if the year of construction has a “tüp.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tüb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation.  %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 20% !!! UNIVERSAL CYLINDRICAL GRINDING MACHINE MSO FM 165/500 WITH INTERNAL GRINDING ATTACHMENT MANUFACTURER: MSO TYPE: FM 165 / 500 MACH.-NR.: M 26214 YEAR OF CONSTRUCTION: ??? / 11.2018 TüP. COMM.-NR.: 3990400/009 STOCK-NR.: 1908 +++ SPECIAL PRICE: OLD 8.850,- € | NOW 7.080,- € +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) THE MACHINE IS SUITABLE FOR: * EXTERNAL GRINDING * INTERNAL GRINDING * SURFACE GRINDING * TAPER GRINDING * CHAMFERING * ANGLED FLAT GRINDING TECHNICAL DATA (ACCORDING TO MANUFACTURER) CENTRE HEIGHT: 180 MM SWING-Ø: 360 MM GRINDING LENGTH: 500 MM BETWEEN CENTRES: 550 MM GRINDING WHEEL DIAMETER: 300 MM BORE-Ø: 127 MM LARGEST WIDTH OF GRINDING WHEEL FOR PLUNGE GRINDING: 40 MM LARGEST TOTAL WIDTH OF A GRINDING WHEEL SET: 80 MM LARGEST SUM OF SINGLE WIDTHS: 40 MM GRINDING WHEEL SPEED: 1.650 / 2.150 RPM = 30 M/S GRINDING HEAD LARGEST GRINDING HEAD HUB: 209 MM LARGEST HUB BY HAND WHEEL: 67 MM ADDITIONAL HUB: 142 MM AUTOM. INTERVAL FEED: 0,005 – 0,020 MM FEED BY ONE REVOLUTION OF HAND WHEEL: ROUGH 25 MM / FINE 2,5 MM FEED BY ONE HAND WHEEL GRADUATION MARK: 0,0025 MM SETTING BY TIP-SWITCH REGARDING DIAMETER: 0,00125 / 0,0025 MM INTERNAL GRINDING ATTACHMENT LARGEST DISTANCE FROM FRONT EDGE SPINDLE HEADSTOCK TO GRINDING SPIDNLE CARRIER: 750 MM BORE FOR CARRYING THE SPINDLE: 60 MM LARGEST GRINDABLE BORE: 125 MM / MAYBE LARGER HEADSTOCK SPINDLE 6 WORK-PIECE SPEEDS, ADJUSTABLE: 40 – 305 RPM ROTATABILITY OF HEADSTOCK SPINDLE AGAINST THE GRINDING WHEEL: 90° SPINDLE CONE OR INNER TAPER OF HEADSTOCK SPINDLE: MK 4 TAILSTOCK INNER CONE OF QUILL: MK 3 QUILL TRAVEL: 20 MM TABLE LARGEST TABLE INCLINE: 10° LARGEST CONE ANGLE: 20° TABLE SPEED: 0,2 – 1,1 M/MIN ROUGH TRAVEL BY HAND WHEEL: 1 REVOLUTION 25 MM, 1 GRADUATION MARK 0,25 MM FINE TRAVEL BY HAND WHEEL: 1 REVOLUTION 2,5 MM, 1 GRADUATION MARK 0,025 MM TOTAL CONNECTED LOAD: CA. 4 KW WEIGHT: CA. 1.800 KG STANDING AREA: W 2,10 X D 1,20 X H 1,60 M COLOR: BLUE / GREY-WHITE / RED FEATURES * ROTATABLE INTERNAL GRINDING ATTACHMENT * MANUAL OR AUTOMATIC OPERATION * SELF-FEEDING UP TO 0-LIMIT * GRINDING WHEEL FINE ADJUSTMENT 0,00125 / 0,0025 * AUTOMATIC FEED WORKS AS PIERCING FEED, WITHOUT FEED, TABLE-DEPENDANT FEED * ONLY RIGHT / LEFT AND RIGHT / ONLY LEFT * UPPER TABLE FOR TAMPER GRINDING WITH FINE FEED AND MEASURING CLOCK * BEDWAY IS LUBRICATED BY RE-OIL * TAILSTOCK CAN BE ACTIVATED BY MECHANICAL LEVER * ATTACHMENT WITH MEASURING CLOCK FOR TABLE PIVOTING UP TO 10° * HEADSTOCK SPINDLE PIVOTABLE UP TO 360° * GRINDING HEAD PIVOTABLE UP TO 360°, IN 2 LAYERS * GRINDING HEAD TWO SPEEDS * FREE-STANDING LIQUID COOLING SYSTEM, MOBILE * SPLASH GUARDS * 3 PIECES GRINDING WHEEL FLANGES WITH WHEELS * INTERNAL GRINDING SPINDLE WITH CONE ATTACHMENT AND EXTRACTION THREADING * INTERNAL GRINDING SPINDLE WITH FASTENING CLAMP ATTACHMENT AND FASTENING CLAMP Ø 6 MM * INTERNAL COOLING THROUGH WORK SPINDLE ON WORK PIECE DURING INTERNAL GRINDING * 2. DRIVING PULLEY TO ADJUST THE INTERNAL GRINDING SPINDLE RMP SETTING * ADJUSTABLE STRAIGHT AND RADIAL MATCHING DEVICE WITH QUICK-FASTENING LEVER * ADJUSTABLE DRESSING DEVICE FOR GRINDING WHEEL, AT TAILSTOCK * ADJUSTABLE SIDE AND DIAGONAL DRESSING DEVICE WITH SCALE, FOR GRINDING WHEEL, WITH QUICK-RELEASE LEVER * OPEN LUNETTE, ADJUSTABLE * THREE-CHUCK-FASTENING BUFFER FORKHARDT Ø 125 MM, WITH SPINDLE RECEIVER FLANGE * COLLET ATTACHMENT FOR DIRECT SPINDLE RECEPTION * FASTENING CLAMP DEVICE WITH SPINDLE RECEVIER * 10 COLLET CHUCKS FOR COLLET FROM Ø 3 MM – 22 MM * 5 VIBRATION-DAMPENING STANDING BARS * OF INTERNAL GRINDING SPINDLES IN VARIOUS SIZES * OPERATING MANUAL THE SELLER INFORMED US THIS HAS BEEN USED IN A TEACHING ENVIRONMENT. * IF THE YEAR OF CONSTRUCTION HAS A “TüP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TüB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION.
Vendedor: ProHa Maschinen
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>km-1103</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic 6000l -1600</td> </tr> <tr> <td>year:</td> <td>2001</td> </tr> <tr> <td>working area:</td> <td>3085 x 1650 mm</td> </tr> <tr> <td>laser rated output:</td> <td>3200 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840d</td> </tr> <tr> <td>working hour:</td> <td>54.341h / 12.015h</td> </tr> <tr> <td>punching force:</td> <td>22 to</td> </tr> <tr> <td>max. tool diameter:</td> <td>76,2 mm</td> </tr> <tr> <td>max. sheet thick.:</td> <td>8 mm</td> </tr> <tr> <td>max. material weight:</td> <td>230 kg</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,10 mm</td> </tr> <tr> <td>length:</td> <td>9100 mm</td> </tr> <tr> <td>width:</td> <td>7900 mm</td> </tr> <tr> <td>height:</td> <td>2400 mm</td> </tr> <tr> <td>weight:</td> <td>22500 kg</td> </tr> </tbody> </table> <br> \n<strong> </strong> </h3> \n<strong> </strong> </h3> \n<strong>standard configuration</strong> </h3>\n<strong> </strong> </h3> <strong> </strong> </h3>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>stable c-frame</li>\n	<li>coordinate guide with integrated linear magazine, 17 tool stations,</li>\n	<li>3 clamps</li>\n	<li>drives: maintenance-free, three-phase servo motors</li>\n	<li>programmable presser foot for repositioning</li>\n</ul>\n\n	<ul>\n	<li>sensor-monitored part chutes 500 x 500 mm for punching and laser station, </li>\n</ul>\nejection cylinder on the laser chute\n\n	<ul>\n	<li>2 parts containers</li>\n	<li>laser unit: co2 laser tlf 2000, radio-frequency excited, insulated against vibrations,</li>\n</ul>\nintegrated in machine frame, incl. chiller, and laser control tasc 3\n\n	<ul>\n	<li>hi-las high pressure cutting</li>\n	<li>contourlas for producing small holes</li>\n	<li>programmable cutting gas pressure setting</li>\n	<li>laser cutting head: 5 lens, quick-change device, height regulation dias iii</li>\n	<li>additional laser cutting head with 7.5 lens</li>\n	<li>additional laser cutting head with 9 lens for va steel processing</li>\n	<li>punching head: hydraulic single tool adapter, 360° rotation of all tools, automatic tool </li>\n</ul>\nlength compensation, spray tool lubrication, 2nd lubricant container, vacuum slug removal,\nswarf bucket\n\n	<ul>\n	<li>control: sinumerik 840d, tft color screen 10.4, easy to use, online help, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5 disk drive, bnc/rj45 connection</li>\n	<li>safety: multi-beam light barriers, laser monitoring system, rapid hydraulic shutdown, extraction system and compact dust extractor, laser guard against scattered radiation at the cutting head</li>\n</ul>\n \n<strong>additional equipment</strong> </h3>\n<strong> </strong> </h3> \n<strong> </strong> </h3> <strong>punching options</strong>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>multitool control</li>\n	<li>multibend</li>\n	<li>multishear</li>\n	<li>tapping</li>\n	<li>marking</li>\n	<li>softpunch</li>\n</ul>\n \n<strong>machine options</strong>\n·fourth clamp \n\n	<ul>\n	<li>clamps opening individually</li>\n	<li>pneumatic repositioning cylinders</li>\n	<li>anti-vibration installation</li>\n</ul>\n \n<strong>special thin sheet processing</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>scratch-free machining</li>\n	<li>blow-out device</li>\n	<li>sheet collision detection</li>\n</ul>\n \n<strong>handling/organization</strong>\n<strong> </strong>·chip conveyor with tipping container\n \n<strong>additional equipment</strong> </h3>\n \n\n	<ul>\n	<li>preparation for fmc (sheetmaster, storage interface)</li>\n</ul>\n \n \n

TECHNICAL DATA

ITEM NUMBER: KM-1103
MANUFACTURER: TRUMPF
TYPE: TRUMATIC 6000L -1600
YEAR: 2001
WORKING AREA: 3085 X 1650 MM
LASER RATED OUTPUT: 3200 WATT
CONTROL: SIEMENS SINUMERIK 840D
WORKING HOUR: 54.341H / 12.015H
PUNCHING FORCE: 22 TO
MAX. TOOL DIAMETER: 76,2 MM
MAX. SHEET THICK.: 8 MM
MAX. MATERIAL WEIGHT: 230 KG
POSITIONING ACCURACY: +/- 0,10 MM
LENGTH: 9100 MM
WIDTH: 7900 MM
HEIGHT: 2400 MM
WEIGHT: 22500 KG

\N \N \NSTANDARD CONFIGURATION \N \N \N
    \N
  • STABLE C-FRAME
  • \N
  • COORDINATE GUIDE WITH INTEGRATED LINEAR MAGAZINE, 17 TOOL STATIONS,
  • \N
  • 3 CLAMPS
  • \N
  • DRIVES: MAINTENANCE-FREE, THREE-PHASE SERVO MOTORS
  • \N
  • PROGRAMMABLE PRESSER FOOT FOR REPOSITIONING
  • \N
\N\N
    \N
  • SENSOR-MONITORED PART CHUTES 500 X 500 MM FOR PUNCHING AND LASER STATION,
  • \N
\NEJECTION CYLINDER ON THE LASER CHUTE\N\N
    \N
  • 2 PARTS CONTAINERS
  • \N
  • LASER UNIT: CO2 LASER TLF 2000, RADIO-FREQUENCY EXCITED, INSULATED AGAINST VIBRATIONS,
  • \N
\NINTEGRATED IN MACHINE FRAME, INCL. CHILLER, AND LASER CONTROL TASC 3\N\N
    \N
  • HI-LAS HIGH PRESSURE CUTTING
  • \N
  • CONTOURLAS FOR PRODUCING SMALL HOLES
  • \N
  • PROGRAMMABLE CUTTING GAS PRESSURE SETTING
  • \N
  • LASER CUTTING HEAD: 5 LENS, QUICK-CHANGE DEVICE, HEIGHT REGULATION DIAS III
  • \N
  • ADDITIONAL LASER CUTTING HEAD WITH 7.5 LENS
  • \N
  • ADDITIONAL LASER CUTTING HEAD WITH 9 LENS FOR VA STEEL PROCESSING
  • \N
  • PUNCHING HEAD: HYDRAULIC SINGLE TOOL ADAPTER, 360° ROTATION OF ALL TOOLS, AUTOMATIC TOOL
  • \N
\NLENGTH COMPENSATION, SPRAY TOOL LUBRICATION, 2ND LUBRICANT CONTAINER, VACUUM SLUG REMOVAL,\NSWARF BUCKET\N\N
    \N
  • CONTROL: SINUMERIK 840D, TFT COLOR SCREEN 10.4, EASY TO USE, ONLINE HELP, DIAGNOSTIC FUNCTIONS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELESERVICE, 3.5 DISK DRIVE, BNC/RJ45 CONNECTION
  • \N
  • SAFETY: MULTI-BEAM LIGHT BARRIERS, LASER MONITORING SYSTEM, RAPID HYDRAULIC SHUTDOWN, EXTRACTION SYSTEM AND COMPACT DUST EXTRACTOR, LASER GUARD AGAINST SCATTERED RADIATION AT THE CUTTING HEAD
  • \N
\N \NADDITIONAL EQUIPMENT \N \N PUNCHING OPTIONS\N \N
    \N
  • MULTITOOL CONTROL
  • \N
  • MULTIBEND
  • \N
  • MULTISHEAR
  • \N
  • TAPPING
  • \N
  • MARKING
  • \N
  • SOFTPUNCH
  • \N
\N \NMACHINE OPTIONS\N·FOURTH CLAMP \N\N
    \N
  • CLAMPS OPENING INDIVIDUALLY
  • \N
  • PNEUMATIC REPOSITIONING CYLINDERS
  • \N
  • ANTI-VIBRATION INSTALLATION
  • \N
\N \NSPECIAL THIN SHEET PROCESSING\N \N
    \N
  • SCRATCH-FREE MACHINING
  • \N
  • BLOW-OUT DEVICE
  • \N
  • SHEET COLLISION DETECTION
  • \N
\N \NHANDLING/ORGANIZATION\N ·CHIP CONVEYOR WITH TIPPING CONTAINER\N \NADDITIONAL EQUIPMENT \N \N\N
    \N
  • PREPARATION FOR FMC (SHEETMASTER, STORAGE INTERFACE)
  • \N
\N \N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Precio: 2.200 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 20% !!!


horiz. threading machine
wagner wb – z 27

manufacturer: wagner
type: wb – z 27
mach.-nr.: 17834
year of construction: ??? / 10.2018 tüp.
comm.-nr.: 3999375/009
stock-nr.: 1905

+++ special price: old 2.750,- € | now 2.200,- € 
+++ all prices are shown without taxes (net price)

 
technical data

(according to manufacturer)

cutting area: m6 – m 27 | r 1/8? – r 1? | w 1/4? – w 1?

10 spindle speeds: 68,5 – 168 u / min.
slide travel: 380 mm

 

drive power: 2,5 kw
weight: ca. 450 kg
standing area: w 1,40 x d 0,80 x h 1,10 m
color: green ral 6011

 
features

* thread-cutting head z 27, self-opening
* 2 sets of chaser die holders
* sets chaser dies
* cooling system
* splinter shoot

the rotational speeds of the spindle are changed by the transmission of the engine.

the cutting head is opened and closed by adjustable limit stops.


* if the year of construction has a “tüp.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tüb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation.  %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 20% !!! HORIZ. THREADING MACHINE WAGNER WB – Z 27 MANUFACTURER: WAGNER TYPE: WB – Z 27 MACH.-NR.: 17834 YEAR OF CONSTRUCTION: ??? / 10.2018 TüP. COMM.-NR.: 3999375/009 STOCK-NR.: 1905 +++ SPECIAL PRICE: OLD 2.750,- € | NOW 2.200,- € +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) TECHNICAL DATA (ACCORDING TO MANUFACTURER) CUTTING AREA: M6 – M 27 | R 1/8? – R 1? | W 1/4? – W 1? 10 SPINDLE SPEEDS: 68,5 – 168 U / MIN. SLIDE TRAVEL: 380 MM DRIVE POWER: 2,5 KW WEIGHT: CA. 450 KG STANDING AREA: W 1,40 X D 0,80 X H 1,10 M COLOR: GREEN RAL 6011 FEATURES * THREAD-CUTTING HEAD Z 27, SELF-OPENING * 2 SETS OF CHASER DIE HOLDERS * SETS CHASER DIES * COOLING SYSTEM * SPLINTER SHOOT THE ROTATIONAL SPEEDS OF THE SPINDLE ARE CHANGED BY THE TRANSMISSION OF THE ENGINE. THE CUTTING HEAD IS OPENED AND CLOSED BY ADJUSTABLE LIMIT STOPS. * IF THE YEAR OF CONSTRUCTION HAS A “TüP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TüB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION.
Vendedor: ProHa Maschinen
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>sm-1278</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic 5000fmc -1300</td> </tr> <tr> <td>year:</td> <td>2001</td> </tr> <tr> <td>working area:</td> <td>2535 x 1280 mm</td> </tr> <tr> <td>punching force:</td> <td>22 to</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840d</td> </tr> <tr> <td>working hour:</td> <td>33.185 h</td> </tr> <tr> <td>max. sheet thick.:</td> <td>8 mm</td> </tr> <tr> <td>max. material weight:</td> <td>200 kg</td> </tr> <tr> <td>max. tool diameter:</td> <td>76,2 mm</td> </tr> <tr> <td>max. speed:</td> <td>100/60/116 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>15500 mm</td> </tr> <tr> <td>width:</td> <td>6760 mm</td> </tr> <tr> <td>height:</td> <td>2500 mm</td> </tr> <tr> <td>weight:</td> <td>13700 kg</td> </tr> </tbody> </table> <br> \n \n \n<h3> <strong>standard configuration</strong> </h3>\n \n\n	<ul>\n	<li>stable c-frame</li>\n	<li>coordinate guide with integrated linear magazine, 18 tool stations, automatic tool changer, 3 clamps</li>\n	<li>automatic parts chute 500 x 500 mm</li>\n	<li>2 parts container</li>\n	<li>drives: maintenance-free, three-phase servo motors</li>\n	<li>punching head: hydraulic single tool adapter, 360° rotation of all </li>\n</ul>\ntools, automatic tool length compensation, spray tool lubrication\n2nd lubricant container, programmable stripper movement, \nvacuum slug removal, swarf bucket\n\n	<ul>\n	<li>programmable presser foot for repositioning, with pre-selectable presser force</li>\n	<li>sheet collision detection</li>\n	<li>ball tables</li>\n	<li>order table</li>\n	<li>control: sinumerik 840d, tft color screen 10.4, easy to use, </li>\n</ul>\ndiagnostic functions, graphic programming tops 2000, integrated 3.5 disk drive, bnc and rj45 network connection\n\n	<ul>\n	<li>safety: ce marking, multi-beam light barriers, rapid hydraulic shutdown</li>\n	<li> </li>\n	<li> <strong> </strong> </h3> <h3> <strong>additional equipment</strong> </h3> </li>\n	<li> </li>\n	<li> <strong> </strong> <strong>punching options</strong> </li>\n	<li> <strong> </strong> <strong> </strong>18 rtc cartridges incl. die plates</li>\n	<li>multitool</li>\n	<li>tapping</li>\n	<li>slotting</li>\n	<li>marking</li>\n	<li>softpunch</li>\n</ul>\n \n<strong>machine options</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>repositioning cylinders</li>\n	<li>sensor for parts chute</li>\n	<li>anti-vibration installation</li>\n	<li>scratch-free machining</li>\n	<li>brush tables with loading and unloading aid</li>\n	<li>blow-out device</li>\n</ul>\n \n<strong>handling / organization</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>chip conveyor with tilt container</li>\n	<li>foot switch for start release</li>\n</ul>\n \n<h3> <strong>automation</strong> </h3>\n \n\n	<ul>\n	<li> <strong> </strong> </h3> <strong>sheetmaster 1305</strong> </li>\n	<li> <strong> </strong> <strong> </strong>standard configuration trl sheetmaster 1305 (2500 x 1250 mm)\n		<ul>\n		<li>-loading pedestal 2500 x 1250 mm</li>\n		<li>-peeler suction cups</li>\n		<li>-trumagrip</li>\n	</ul> </li> <li> </li>\n	<li>additional equipment sheetmaster 1305\n		<ul>\n		<li>-suction plate module with vacuum sensor system </li>\n		<li>-loading and unloading parallel to production</li>\n	</ul> </li> <li> </li>\n	<li>automation sheet metal processing systems</li>\n</ul>\n-double cart system loading unit (underfloor rail system)\n-double cart system unloading system (underfloor rail system)\n-peeling package for thin metal processing (sheetmaster)\n \n<strong> </strong>

TECHNICAL DATA

ITEM NUMBER: SM-1278
MANUFACTURER: TRUMPF
TYPE: TRUMATIC 5000FMC -1300
YEAR: 2001
WORKING AREA: 2535 X 1280 MM
PUNCHING FORCE: 22 TO
CONTROL: SIEMENS SINUMERIK 840D
WORKING HOUR: 33.185 H
MAX. SHEET THICK.: 8 MM
MAX. MATERIAL WEIGHT: 200 KG
MAX. TOOL DIAMETER: 76,2 MM
MAX. SPEED: 100/60/116 M/MIN
POSITIONING ACCURACY: +/- 0,1 MM
LENGTH: 15500 MM
WIDTH: 6760 MM
HEIGHT: 2500 MM
WEIGHT: 13700 KG

\N \N \N

STANDARD CONFIGURATION

\N \N\N
    \N
  • STABLE C-FRAME
  • \N
  • COORDINATE GUIDE WITH INTEGRATED LINEAR MAGAZINE, 18 TOOL STATIONS, AUTOMATIC TOOL CHANGER, 3 CLAMPS
  • \N
  • AUTOMATIC PARTS CHUTE 500 X 500 MM
  • \N
  • 2 PARTS CONTAINER
  • \N
  • DRIVES: MAINTENANCE-FREE, THREE-PHASE SERVO MOTORS
  • \N
  • PUNCHING HEAD: HYDRAULIC SINGLE TOOL ADAPTER, 360° ROTATION OF ALL
  • \N
\NTOOLS, AUTOMATIC TOOL LENGTH COMPENSATION, SPRAY TOOL LUBRICATION\N2ND LUBRICANT CONTAINER, PROGRAMMABLE STRIPPER MOVEMENT, \NVACUUM SLUG REMOVAL, SWARF BUCKET\N\N
    \N
  • PROGRAMMABLE PRESSER FOOT FOR REPOSITIONING, WITH PRE-SELECTABLE PRESSER FORCE
  • \N
  • SHEET COLLISION DETECTION
  • \N
  • BALL TABLES
  • \N
  • ORDER TABLE
  • \N
  • CONTROL: SINUMERIK 840D, TFT COLOR SCREEN 10.4, EASY TO USE,
  • \N
\NDIAGNOSTIC FUNCTIONS, GRAPHIC PROGRAMMING TOPS 2000, INTEGRATED 3.5 DISK DRIVE, BNC AND RJ45 NETWORK CONNECTION\N\N
    \N
  • SAFETY: CE MARKING, MULTI-BEAM LIGHT BARRIERS, RAPID HYDRAULIC SHUTDOWN
  • \N
  • \N
  • ADDITIONAL EQUIPMENT

  • \N
  • \N
  • PUNCHING OPTIONS
  • \N
  • 18 RTC CARTRIDGES INCL. DIE PLATES
  • \N
  • MULTITOOL
  • \N
  • TAPPING
  • \N
  • SLOTTING
  • \N
  • MARKING
  • \N
  • SOFTPUNCH
  • \N
\N \NMACHINE OPTIONS\N \N
    \N
  • REPOSITIONING CYLINDERS
  • \N
  • SENSOR FOR PARTS CHUTE
  • \N
  • ANTI-VIBRATION INSTALLATION
  • \N
  • SCRATCH-FREE MACHINING
  • \N
  • BRUSH TABLES WITH LOADING AND UNLOADING AID
  • \N
  • BLOW-OUT DEVICE
  • \N
\N \NHANDLING / ORGANIZATION\N \N
    \N
  • CHIP CONVEYOR WITH TILT CONTAINER
  • \N
  • FOOT SWITCH FOR START RELEASE
  • \N
\N \N

AUTOMATION

\N \N\N
    \N
  • SHEETMASTER 1305
  • \N
  • STANDARD CONFIGURATION TRL SHEETMASTER 1305 (2500 X 1250 MM)\N
      \N
    • -LOADING PEDESTAL 2500 X 1250 MM
    • \N
    • -PEELER SUCTION CUPS
    • \N
    • -TRUMAGRIP
    • \N
  • \N
  • ADDITIONAL EQUIPMENT SHEETMASTER 1305\N
      \N
    • -SUCTION PLATE MODULE WITH VACUUM SENSOR SYSTEM
    • \N
    • -LOADING AND UNLOADING PARALLEL TO PRODUCTION
    • \N
  • \N
  • AUTOMATION SHEET METAL PROCESSING SYSTEMS
  • \N
\N-DOUBLE CART SYSTEM LOADING UNIT (UNDERFLOOR RAIL SYSTEM)\N-DOUBLE CART SYSTEM UNLOADING SYSTEM (UNDERFLOOR RAIL SYSTEM)\N-PEELING PACKAGE FOR THIN METAL PROCESSING (SHEETMASTER)\N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Ubicación: Land-complete pringles chip production line. (900 kg hr)
mostly built 2006

s/s super sack unloading station. 
sweco 30 in stainless steel 2-deck vibratory separator.
 advanced food systems model abm1000 1,000 lb. s/s batch mixer with 150 hp drive,
 1200 rpm with approximately 20 hp scraper and allen bradley panel view plus 1000 color touch screen operator controller and s/s two door electrical enclosure.
 machintek s/s hydraulic two roll sheeter with 18 in diameter x 42 in wide jacketed rollers,
 heat exchanger, top mounted feed hopper, remote electrical enclosure with allen bradley panel view plus 1000 color touch screen operator controller,
 s/s eight step elevated operator platform.
 heat and control 2,200 lbs. per hour fryer, 46 in wide x 40 ft. long, including 44 in wide infeed conveyor, s/s with heat and control heat exchanger, (2) - 54 in diameter x 6 ft. high s/s jacketed oil tanks with dish bottom, 2 in center bottom outlet, (3) - s/s legs, pioneer 30 hp centrifugal pump,
 1 hp stainless steel centrifugal pump,
 heat and control oil separator,
 heat and control exhaust system,
 allen bradley remote panelview plus 1000 color touch screen operator controller.
 30 in x 48 in seasoning tumbler, s/s shell, plastic interior liners,
 season applicator, 
poly diaphragm pump and 6 ft. x 8 ft.
 s/s elevated platform with guard rails and stair access.
no packing included
this will be on the market a very short time  COMPLETE PRINGLES CHIP PRODUCTION LINE. (900 KG HR) MOSTLY BUILT 2006 S/S SUPER SACK UNLOADING STATION. SWECO 30 IN STAINLESS STEEL 2-DECK VIBRATORY SEPARATOR. ADVANCED FOOD SYSTEMS MODEL ABM1000 1,000 LB. S/S BATCH MIXER WITH 150 HP DRIVE, 1200 RPM WITH APPROXIMATELY 20 HP SCRAPER AND ALLEN BRADLEY PANEL VIEW PLUS 1000 COLOR TOUCH SCREEN OPERATOR CONTROLLER AND S/S TWO DOOR ELECTRICAL ENCLOSURE. MACHINTEK S/S HYDRAULIC TWO ROLL SHEETER WITH 18 IN DIAMETER X 42 IN WIDE JACKETED ROLLERS, HEAT EXCHANGER, TOP MOUNTED FEED HOPPER, REMOTE ELECTRICAL ENCLOSURE WITH ALLEN BRADLEY PANEL VIEW PLUS 1000 COLOR TOUCH SCREEN OPERATOR CONTROLLER, S/S EIGHT STEP ELEVATED OPERATOR PLATFORM. HEAT AND CONTROL 2,200 LBS. PER HOUR FRYER, 46 IN WIDE X 40 FT. LONG, INCLUDING 44 IN WIDE INFEED CONVEYOR, S/S WITH HEAT AND CONTROL HEAT EXCHANGER, (2) - 54 IN DIAMETER X 6 FT. HIGH S/S JACKETED OIL TANKS WITH DISH BOTTOM, 2 IN CENTER BOTTOM OUTLET, (3) - S/S LEGS, PIONEER 30 HP CENTRIFUGAL PUMP, 1 HP STAINLESS STEEL CENTRIFUGAL PUMP, HEAT AND CONTROL OIL SEPARATOR, HEAT AND CONTROL EXHAUST SYSTEM, ALLEN BRADLEY REMOTE PANELVIEW PLUS 1000 COLOR TOUCH SCREEN OPERATOR CONTROLLER. 30 IN X 48 IN SEASONING TUMBLER, S/S SHELL, PLASTIC INTERIOR LINERS, SEASON APPLICATOR, POLY DIAPHRAGM PUMP AND 6 FT. X 8 FT. S/S ELEVATED PLATFORM WITH GUARD RAILS AND STAIR ACCESS. NO PACKING INCLUDED THIS WILL BE ON THE MARKET A VERY SHORT TIME
Vendedor: Crezta Food Equipment
Año de construcción: usado
Ubicación: Land-number of spindles: 8 st.<br/>working width: 260 mm<br/>working height: 160 mm<br/>length of the planing table: 2000 mm<br/>feed motor: 7 kw<br/>feed speed: 5-30 m/min.<br/>dimensions (l/w/h): 5700x2100x1740 mm<br/>weight of the machine ca.: 5000 kg<br/>control: weinig powercom <br/>weinig powermat 1000 cnc, year 2012<br/>-------------------------------<br/><br/>executive summary:<br/>-------------------------------<br/>8 spindles<br/>hsk / powerlock<br/>large powercom controller<br/>grooved<br/>axial and axial axes cnc controlled<br/><br/>detailed description:<br/>-------------------------------<br/><br/>technical specifications:<br/>-------------------------------<br/>working width max. 260 mm<br/>working height max. 160 mm<br/><br/>1. tool holder<br/>-------------------------------<br/>first lower tool holder<br/>engine with brake 15.0 kw<br/>speed ??8,000 rpm<br/>including high performance ball bearings<br/>tool circle 125 - 180 mm<br/>in conjunction with powerlock 93 - 180 mm<br/>tool circle fold cutters 130-160 mm<br/>adjustment axial 17 mm<br/>electronic digital display for radial adjustment<br/>marathoncoating in front of 1st lower tool holder<br/><br/>2. tool holder powerlock / hsk<br/>-------------------------------<br/>first upper tool holder<br/>engine with brake 15.0 kw<br/>speed ??8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight knife heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial 40 mm<br/><br/>split pressure shoe in front of upper tool holder, on tool circle<br/>adjustable and swing away from the tool, pneumatic<br/><br/>pressure after upper tool holder is penetically high-low tactile.<br/>operating switch attached to the pressure. excavation about 10 mm<br/><br/>3. tool holder powerlock / hsk<br/>------------------------------<br/>first right tool holder<br/>motor with brake 7.5 kw<br/>speed ??8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>maximum throat depth 35 mm<br/>adjustment axial for powerlock 55 mm<br/>adjustment radial<br/>min. tool diameter at stop level 93 mm<br/>max. tool diameter behind stop level 200 mm<br/><br/>4. tool holder powerlock / hsk<br/>------------------------------<br/>first left tool holder<br/>motor with brake 7.5 kw<br/>speed ??8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight cutter heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial for powerlock 55 mm<br/>pressure shoe in front of left tool holder, incl. 2 lateral pressure rollers, <br/>sprung<br/><br/>5. tool holder powerlock / hsk<br/>------------------------------<br/>second right tool holder<br/>motor with brake 7.5 kw<br/>speed ??8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>maximum throat depth 35 mm<br/>adjustment axial for powerlock 55 mm<br/>adjustment radial<br/>min. tool diameter at stop level 93 mm<br/>max. tool diameter behind stop level 200 mm<br/><br/>6. tool holder powerlock / hsk<br/>------------------------------<br/>second left tool holder<br/>motor with brake 7.5 kw<br/>speed ??8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight cutter heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial for powerlock 55 mm<br/>pressure shoe in front of 2 left tool holder, pneumatic<br/><br/>7. tool holder powerlock / hsk<br/>------------------------------<br/>second upper tool holder<br/>engine with brake 11.0 kw<br/>speed ??8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight knife heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial 40 mm<br/><br/>split pressure shoe in front of upper tool holder, on tool circle<br/>adjustable and swing away from the tool, pneumatic<br/><br/>pressure after upper tool holder is penetically high-low tactile.<br/>operating switch attached to the pressure. excavation about 10 mm<br/><br/>8. tool holder powerlock / hsk<br/>------------------------------<br/>second upper tool holder<br/>engine with brake 11.0 kw<br/>speed ??8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 140 mm<br/>maximum throat depth 0 mm<br/>chip removal fixed with shims 0,5 mm<br/>adjustment axial 40 mm<br/>adjustment radial<br/>min. tool diameter to the table level 93 mm<br/>max. tool diameter 6 mm below table level 225 mm<br/>table top adjusted before and after lower tool holder for<br/>tool diameter 140 mm (no gaps in the table)<br/><br/>machine operation powercom plus<br/>------------------------------<br/>profile and tool data management software<br/>setting values ??can be calculated or saved.<br/>these are displayed on the digital double displays.<br/>touchscreen - function for graphically supported operation<br/>per 10,000 profile and tool storage locations<br/>profile pictures can be deposited on the profile data<br/>software servicecontrol for maintenance support<br/>integrated network card for connection to opticontrol or other pcs<br/>usb stick for manual data backup<br/>operating and machine data acquisition, incl. length counter<br/>user management with password function<br/>logging production interruptions<br/><br/>machine operation<br/>------------------------------<br/>basic equipment for installation of cnc-controlled adjustment and<br/>positioning<br/><br/>6 axial cnc-controlled adjustment and positioning of the tool holders<br/>in conjunction with powercom, spindle no. 3,4,5,6,7,8<br/><br/>7 radial cnc-controlled adjustment and positioning of the tool holders<br/>in conjunction with powercom, spindle no. 2,3,4,5,6,7,8<br/><br/>cnc - controlled adjustment and positioning of the feed<br/>high / low in conjunction with the memory function<br/><br/><br/>feed system<br/>------------------------------<br/>frequency-controlled feed, 5 - 30 m / min.<br/>steplessly adjustable with brake 7.0 kw<br/><br/>feed roller before 1. lower tool<br/>pneumatically controlled high-low<br/><br/>durofer pointed toothed rollers (weinig patent)<br/>with depth limiter and self-cleaning<br/><br/>adjustment of the feed rollers opposite<br/>left tool holder, axial 35 mm<br/><br/>extension of the pendulum axis with respect to the first left tool holder to <br/>150 mm<br/><br/>shafts extended to 220 mm<br/><br/>shortened roller distance compared to the right tools<br/>(or in the area right / inks opposite)<br/><br/>3 additional pendulum axles for aufsteckpendel in the area of ??the right / left<br/>opposite tool holders for workpiece widths:<br/>- 120 and 150 mm<br/>- 180 and 210 mm<br/>- 240 mm<br/><br/>2 vorschbwalzen with collar for aufsteckpendel<br/><br/>additional feed roller in front of the first tool<br/><br/><br/>electrical machinery<br/>------------------------------<br/>operating voltage 400 volts<br/>(voltage range 380 x 420 volts), 50 hz<br/>electrical design according to din vde 0113,<br/>electrical equipment of industrial machinery<br/>en60204, iec-204-1. further electrical regulations<br/>are not included.<br/>control cabinet (with control panel) separate from<br/>machine, distance control cabinet machine: 2.5 m<br/><br/>machine stand, table and stops<br/>------------------------------<br/>dressing table 2 m long (incl.<br/>ruler length extended to 3 m (for better alignment of long parts)<br/>rig with casters<br/>fulcrum adjustment extended 0-15 mm<br/>laser set to stop alignment (color red, laser class 2)<br/><br/>grooved guide for short or difficult-to-reach workpieces, coated with<br/>marathon powercoating. tabletops not removable. including einlegeleiste<br/>for transporting narrow workpieces on the slot guide (min<br/>25mm, chip removal at first lower tool holder max. 7 mm)<br/><br/>5 slot bed inserts opposite the first left tool holder<br/>for workpieces with the cover width:<br/>- 120mm, -150mm, -180mm, -210mm, - 240mm<br/><br/>5 nutenbetteinlagen opposite the right / left opposite<br/>tool holder for workpieces with the cover width:<br/>- 120mm, -150mm, -180mm, -210mm, - 240mm<br/><br/><br/>automatic lubricant pump for removing water from the groove guide.<br/><br/>a driven roller in the exit table, 210 mm wide, hardened<br/><br/>two driven rollers in the machine table and a sliding roller<br/>to the right / left opposite tool holder, 210 mm wide, hardened.<br/><br/>pressure rollers and guides<br/>------------------------------<br/>pressure rollers from above, sprung<br/>lateral pressure roller on infeed table, sprung<br/><br/>safety and sound insulation<br/>------------------------------<br/>safety - full fairing<br/>easily foldable safety hood with window covers<br/>the entire work area and protects against mechanical<br/>hazards.<br/>when lifting the safety hood tool holders<br/>and feed automatically switched off.<br/>for ce version, the safety cover is opened during<br/>of automatic mode not possible.<br/>electromagnetic locking of the safety hood<br/>(only after the tools have come to a standstill, approx. 15 seconds,<br/>can the hood be opened)<br/>the machine comes with ce mark and its associated<br/>ec declaration of conformity delivered.<br/>two interior lights in the safety hood<br/>for ripping works e.g. sawing and multiple profiling,<br/>you need suitable protection devices.<br/><br/><br/>(technical data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> NUMBER OF SPINDLES: 8 ST.
WORKING WIDTH: 260 MM
WORKING HEIGHT: 160 MM
LENGTH OF THE PLANING TABLE: 2000 MM
FEED MOTOR: 7 KW
FEED SPEED: 5-30 M/MIN.
DIMENSIONS (L/W/H): 5700X2100X1740 MM
WEIGHT OF THE MACHINE CA.: 5000 KG
CONTROL: WEINIG POWERCOM
WEINIG POWERMAT 1000 CNC, YEAR 2012
-------------------------------

EXECUTIVE SUMMARY:
-------------------------------
8 SPINDLES
HSK / POWERLOCK
LARGE POWERCOM CONTROLLER
GROOVED
AXIAL AND AXIAL AXES CNC CONTROLLED

DETAILED DESCRIPTION:
-------------------------------

TECHNICAL SPECIFICATIONS:
-------------------------------
WORKING WIDTH MAX. 260 MM
WORKING HEIGHT MAX. 160 MM

1. TOOL HOLDER
-------------------------------
FIRST LOWER TOOL HOLDER
ENGINE WITH BRAKE 15.0 KW
SPEED ??8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 125 - 180 MM
IN CONJUNCTION WITH POWERLOCK 93 - 180 MM
TOOL CIRCLE FOLD CUTTERS 130-160 MM
ADJUSTMENT AXIAL 17 MM
ELECTRONIC DIGITAL DISPLAY FOR RADIAL ADJUSTMENT
MARATHONCOATING IN FRONT OF 1ST LOWER TOOL HOLDER

2. TOOL HOLDER POWERLOCK / HSK
-------------------------------
FIRST UPPER TOOL HOLDER
ENGINE WITH BRAKE 15.0 KW
SPEED ??8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT KNIFE HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL 40 MM

SPLIT PRESSURE SHOE IN FRONT OF UPPER TOOL HOLDER, ON TOOL CIRCLE
ADJUSTABLE AND SWING AWAY FROM THE TOOL, PNEUMATIC

PRESSURE AFTER UPPER TOOL HOLDER IS PENETICALLY HIGH-LOW TACTILE.
OPERATING SWITCH ATTACHED TO THE PRESSURE. EXCAVATION ABOUT 10 MM

3. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST RIGHT TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED ??8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL FOR POWERLOCK 55 MM
ADJUSTMENT RADIAL
MIN. TOOL DIAMETER AT STOP LEVEL 93 MM
MAX. TOOL DIAMETER BEHIND STOP LEVEL 200 MM

4. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST LEFT TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED ??8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT CUTTER HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL FOR POWERLOCK 55 MM
PRESSURE SHOE IN FRONT OF LEFT TOOL HOLDER, INCL. 2 LATERAL PRESSURE ROLLERS,
SPRUNG

5. TOOL HOLDER POWERLOCK / HSK
------------------------------
SECOND RIGHT TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED ??8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL FOR POWERLOCK 55 MM
ADJUSTMENT RADIAL
MIN. TOOL DIAMETER AT STOP LEVEL 93 MM
MAX. TOOL DIAMETER BEHIND STOP LEVEL 200 MM

6. TOOL HOLDER POWERLOCK / HSK
------------------------------
SECOND LEFT TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED ??8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT CUTTER HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL FOR POWERLOCK 55 MM
PRESSURE SHOE IN FRONT OF 2 LEFT TOOL HOLDER, PNEUMATIC

7. TOOL HOLDER POWERLOCK / HSK
------------------------------
SECOND UPPER TOOL HOLDER
ENGINE WITH BRAKE 11.0 KW
SPEED ??8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT KNIFE HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL 40 MM

SPLIT PRESSURE SHOE IN FRONT OF UPPER TOOL HOLDER, ON TOOL CIRCLE
ADJUSTABLE AND SWING AWAY FROM THE TOOL, PNEUMATIC

PRESSURE AFTER UPPER TOOL HOLDER IS PENETICALLY HIGH-LOW TACTILE.
OPERATING SWITCH ATTACHED TO THE PRESSURE. EXCAVATION ABOUT 10 MM

8. TOOL HOLDER POWERLOCK / HSK
------------------------------
SECOND UPPER TOOL HOLDER
ENGINE WITH BRAKE 11.0 KW
SPEED ??8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 140 MM
MAXIMUM THROAT DEPTH 0 MM
CHIP REMOVAL FIXED WITH SHIMS 0,5 MM
ADJUSTMENT AXIAL 40 MM
ADJUSTMENT RADIAL
MIN. TOOL DIAMETER TO THE TABLE LEVEL 93 MM
MAX. TOOL DIAMETER 6 MM BELOW TABLE LEVEL 225 MM
TABLE TOP ADJUSTED BEFORE AND AFTER LOWER TOOL HOLDER FOR
TOOL DIAMETER 140 MM (NO GAPS IN THE TABLE)

MACHINE OPERATION POWERCOM PLUS
------------------------------
PROFILE AND TOOL DATA MANAGEMENT SOFTWARE
SETTING VALUES ??CAN BE CALCULATED OR SAVED.
THESE ARE DISPLAYED ON THE DIGITAL DOUBLE DISPLAYS.
TOUCHSCREEN - FUNCTION FOR GRAPHICALLY SUPPORTED OPERATION
PER 10,000 PROFILE AND TOOL STORAGE LOCATIONS
PROFILE PICTURES CAN BE DEPOSITED ON THE PROFILE DATA
SOFTWARE SERVICECONTROL FOR MAINTENANCE SUPPORT
INTEGRATED NETWORK CARD FOR CONNECTION TO OPTICONTROL OR OTHER PCS
USB STICK FOR MANUAL DATA BACKUP
OPERATING AND MACHINE DATA ACQUISITION, INCL. LENGTH COUNTER
USER MANAGEMENT WITH PASSWORD FUNCTION
LOGGING PRODUCTION INTERRUPTIONS

MACHINE OPERATION
------------------------------
BASIC EQUIPMENT FOR INSTALLATION OF CNC-CONTROLLED ADJUSTMENT AND
POSITIONING

6 AXIAL CNC-CONTROLLED ADJUSTMENT AND POSITIONING OF THE TOOL HOLDERS
IN CONJUNCTION WITH POWERCOM, SPINDLE NO. 3,4,5,6,7,8

7 RADIAL CNC-CONTROLLED ADJUSTMENT AND POSITIONING OF THE TOOL HOLDERS
IN CONJUNCTION WITH POWERCOM, SPINDLE NO. 2,3,4,5,6,7,8

CNC - CONTROLLED ADJUSTMENT AND POSITIONING OF THE FEED
HIGH / LOW IN CONJUNCTION WITH THE MEMORY FUNCTION


FEED SYSTEM
------------------------------
FREQUENCY-CONTROLLED FEED, 5 - 30 M / MIN.
STEPLESSLY ADJUSTABLE WITH BRAKE 7.0 KW

FEED ROLLER BEFORE 1. LOWER TOOL
PNEUMATICALLY CONTROLLED HIGH-LOW

DUROFER POINTED TOOTHED ROLLERS (WEINIG PATENT)
WITH DEPTH LIMITER AND SELF-CLEANING

ADJUSTMENT OF THE FEED ROLLERS OPPOSITE
LEFT TOOL HOLDER, AXIAL 35 MM

EXTENSION OF THE PENDULUM AXIS WITH RESPECT TO THE FIRST LEFT TOOL HOLDER TO
150 MM

SHAFTS EXTENDED TO 220 MM

SHORTENED ROLLER DISTANCE COMPARED TO THE RIGHT TOOLS
(OR IN THE AREA RIGHT / INKS OPPOSITE)

3 ADDITIONAL PENDULUM AXLES FOR AUFSTECKPENDEL IN THE AREA OF ??THE RIGHT / LEFT
OPPOSITE TOOL HOLDERS FOR WORKPIECE WIDTHS:
- 120 AND 150 MM
- 180 AND 210 MM
- 240 MM

2 VORSCHBWALZEN WITH COLLAR FOR AUFSTECKPENDEL

ADDITIONAL FEED ROLLER IN FRONT OF THE FIRST TOOL


ELECTRICAL MACHINERY
------------------------------
OPERATING VOLTAGE 400 VOLTS
(VOLTAGE RANGE 380 X 420 VOLTS), 50 HZ
ELECTRICAL DESIGN ACCORDING TO DIN VDE 0113,
ELECTRICAL EQUIPMENT OF INDUSTRIAL MACHINERY
EN60204, IEC-204-1. FURTHER ELECTRICAL REGULATIONS
ARE NOT INCLUDED.
CONTROL CABINET (WITH CONTROL PANEL) SEPARATE FROM
MACHINE, DISTANCE CONTROL CABINET MACHINE: 2.5 M

MACHINE STAND, TABLE AND STOPS
------------------------------
DRESSING TABLE 2 M LONG (INCL.
RULER LENGTH EXTENDED TO 3 M (FOR BETTER ALIGNMENT OF LONG PARTS)
RIG WITH CASTERS
FULCRUM ADJUSTMENT EXTENDED 0-15 MM
LASER SET TO STOP ALIGNMENT (COLOR RED, LASER CLASS 2)

GROOVED GUIDE FOR SHORT OR DIFFICULT-TO-REACH WORKPIECES, COATED WITH
MARATHON POWERCOATING. TABLETOPS NOT REMOVABLE. INCLUDING EINLEGELEISTE
FOR TRANSPORTING NARROW WORKPIECES ON THE SLOT GUIDE (MIN
25MM, CHIP REMOVAL AT FIRST LOWER TOOL HOLDER MAX. 7 MM)

5 SLOT BED INSERTS OPPOSITE THE FIRST LEFT TOOL HOLDER
FOR WORKPIECES WITH THE COVER WIDTH:
- 120MM, -150MM, -180MM, -210MM, - 240MM

5 NUTENBETTEINLAGEN OPPOSITE THE RIGHT / LEFT OPPOSITE
TOOL HOLDER FOR WORKPIECES WITH THE COVER WIDTH:
- 120MM, -150MM, -180MM, -210MM, - 240MM


AUTOMATIC LUBRICANT PUMP FOR REMOVING WATER FROM THE GROOVE GUIDE.

A DRIVEN ROLLER IN THE EXIT TABLE, 210 MM WIDE, HARDENED

TWO DRIVEN ROLLERS IN THE MACHINE TABLE AND A SLIDING ROLLER
TO THE RIGHT / LEFT OPPOSITE TOOL HOLDER, 210 MM WIDE, HARDENED.

PRESSURE ROLLERS AND GUIDES
------------------------------
PRESSURE ROLLERS FROM ABOVE, SPRUNG
LATERAL PRESSURE ROLLER ON INFEED TABLE, SPRUNG

SAFETY AND SOUND INSULATION
------------------------------
SAFETY - FULL FAIRING
EASILY FOLDABLE SAFETY HOOD WITH WINDOW COVERS
THE ENTIRE WORK AREA AND PROTECTS AGAINST MECHANICAL
HAZARDS.
WHEN LIFTING THE SAFETY HOOD TOOL HOLDERS
AND FEED AUTOMATICALLY SWITCHED OFF.
FOR CE VERSION, THE SAFETY COVER IS OPENED DURING
OF AUTOMATIC MODE NOT POSSIBLE.
ELECTROMAGNETIC LOCKING OF THE SAFETY HOOD
(ONLY AFTER THE TOOLS HAVE COME TO A STANDSTILL, APPROX. 15 SECONDS,
CAN THE HOOD BE OPENED)
THE MACHINE COMES WITH CE MARK AND ITS ASSOCIATED
EC DECLARATION OF CONFORMITY DELIVERED.
TWO INTERIOR LIGHTS IN THE SAFETY HOOD
FOR RIPPING WORKS E.G. SAWING AND MULTIPLE PROFILING,
YOU NEED SUITABLE PROTECTION DEVICES.


(TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Precio: 2.712 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 20% !!!


horiz. threading machine
wagner wb – z 27

manufacturer: wagner
type: wb – z 27
mach.-nr.: 18790
year of construction: ??? / 10.2018 tüp.
comm.-nr.: 3999375/009
stock-nr.: 1904

+++ special price: old 3.390,- € | now 2.712,- €
+++ all prices are shown without taxes (net price)

 
technical data

(according to manufacturer)

cutting area: m6 – m 27 | r 1/8? – r 1? | w 1/4? – w 1?

10 spindle speeds: 68,5 – 168 u / min.
slide travel: 380 mm

 

drive power: 2,5 kw
weight: ca. 450 kg
standing area: w 1,40 x d 0,80 x h 1,10 m
color: green ral 6011

 
features

* thread-cutting head wagner z 27, self-opening
* 3 sets of chaser die holders
* various chasers
* chaser holder fastening ring for z 27
* cooling system
* splinter shoot
* operating manual for wagner head z 27

the rotational speeds of the spindle are changed by the transmission of the engine.

the cutting head is opened and closed by adjustable limit stops.


* if the year of construction has a “tüp.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tüb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation.    %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 20% !!! HORIZ. THREADING MACHINE WAGNER WB – Z 27 MANUFACTURER: WAGNER TYPE: WB – Z 27 MACH.-NR.: 18790 YEAR OF CONSTRUCTION: ??? / 10.2018 TüP. COMM.-NR.: 3999375/009 STOCK-NR.: 1904 +++ SPECIAL PRICE: OLD 3.390,- € | NOW 2.712,- € +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) TECHNICAL DATA (ACCORDING TO MANUFACTURER) CUTTING AREA: M6 – M 27 | R 1/8? – R 1? | W 1/4? – W 1? 10 SPINDLE SPEEDS: 68,5 – 168 U / MIN. SLIDE TRAVEL: 380 MM DRIVE POWER: 2,5 KW WEIGHT: CA. 450 KG STANDING AREA: W 1,40 X D 0,80 X H 1,10 M COLOR: GREEN RAL 6011 FEATURES * THREAD-CUTTING HEAD WAGNER Z 27, SELF-OPENING * 3 SETS OF CHASER DIE HOLDERS * VARIOUS CHASERS * CHASER HOLDER FASTENING RING FOR Z 27 * COOLING SYSTEM * SPLINTER SHOOT * OPERATING MANUAL FOR WAGNER HEAD Z 27 THE ROTATIONAL SPEEDS OF THE SPINDLE ARE CHANGED BY THE TRANSMISSION OF THE ENGINE. THE CUTTING HEAD IS OPENED AND CLOSED BY ADJUSTABLE LIMIT STOPS. * IF THE YEAR OF CONSTRUCTION HAS A “TüP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TüB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION.
Vendedor: ProHa Maschinen
Año de construcción: usado
Ubicación: Land-x-travel:510 mm<br/>y-travel:510 mm<br/>z-travel:510 mm<br/>:550 x h 800 mm<br/>b-axis (table):0.001 grad<br/>table-size:400 mm<br/>table load:400 kg<br/>spindle drive:22 kw<br/>spindle nose:40 bbt<br/>spindle speeds:15000 1/min<br/>number of tools:60 <br/>tool diameter:150 mm<br/>tool length - max.:410 mm<br/>weight of tools max.:8 kg<br/>milling feeds:1-20.000 mm/min<br/>rapid speed:60 m/min<br/>machine size (lxwxh):1750x4210x2720 mm<br/>weight of the machine ca.:8 t<br/>inner coolant:70 bar<br/>oil-coolant separator: <br/>ce-design: <br/>technical documentation in german language: <br/>air gun, water gun: <br/>3 chip conveyor: <br/><br/>brand new horizontal machining center with:   contains:  1. control system fanuc oi-mf (10.4\ X-TRAVEL:510 MM
Y-TRAVEL:510 MM
Z-TRAVEL:510 MM
:550 X H 800 MM
B-AXIS (TABLE):0.001 GRAD
TABLE-SIZE:400 MM
TABLE LOAD:400 KG
SPINDLE DRIVE:22 KW
SPINDLE NOSE:40 BBT
SPINDLE SPEEDS:15000 1/MIN
NUMBER OF TOOLS:60
TOOL DIAMETER:150 MM
TOOL LENGTH - MAX.:410 MM
WEIGHT OF TOOLS MAX.:8 KG
MILLING FEEDS:1-20.000 MM/MIN
RAPID SPEED:60 M/MIN
MACHINE SIZE (LXWXH):1750X4210X2720 MM
WEIGHT OF THE MACHINE CA.:8 T
INNER COOLANT:70 BAR
OIL-COOLANT SEPARATOR:
CE-DESIGN:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
AIR GUN, WATER GUN:
3 CHIP CONVEYOR:

BRAND NEW HORIZONTAL MACHINING CENTER WITH: CONTAINS: 1. CONTROL SYSTEM FANUC OI-MF (10.4\" SCREEN) 2. WORKING TABLE SIZE: 400 X 400 MM 3. MAX. WORKPIECE DIMENSION: DIA. 550 X H 800 MM 4. MAX. TABLE LOAD CAPACITY: 400 KGS EACH PALLET 5. SPINDLE CENTER TO TABLE SURFACE: 80 ~ 590 MM 6. TABLE CENTER TO SPINDLE NOSE: 70 ~ 580 MM 7. X/Y/Z STROKE 510/510/510 MM 8. X/Y/Z STROKE RAPID TRAVERSE: 60/60/60 M/MIN 9. SPINDLE MOTOR 18,5/25/37 KW 10. SPINDLE SPEED 15000 RPM (BUILT-IN TYPE) 11. SPINDLE COOLER 12. SPINDLE NOSE BBT40 13. ATC CAPACITY 40 TOOLS 14. COOLANT UNIT (REAR SIDE OF MACHINE) 15. COOLANT THRU. SPINDLE W/H HIGH PRESSURE PUMP (20BAR) AND FILTER SYSTEM (A TYPE) 16. FULL SPLASH COVER 17. ROTART TYPE APC UNIT X 2 WORKING PALLETS (400X400MM) 18. 4TH AXIS (B-AXIS) FUNCTION INDEX 0.001 DEGREE POSITIONING 19. ELECTRIC CABINET WITH HEAT EXCHANGER 20. TRANSFORMER (POWER SOURCE 380V) 21. RIGID TAPPING 22. MANUAL PULSE GENERATOR 23. CHIP CONVEYOR H=1100 MM WITH TROLLEY (INTEGRATED TYPE)REAR SIDE DISCHARGE 24. NEW DESIGN MACHINE COVER & COLOR SCHEME 25. FANUC WARRANTY (WESTERN EUROPE) OPTIONS: 1. CE MARK 2. UPGRADED ATC CAPACITY 60 TOOLS 3. COOLANT GUN WITH ON/OFF SWITCH 4. OIL SKIMMER (DISC TYPE) 5. MANUAL GUIDE I FUNCTION
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 2.712 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 20% !!!


horiz. threading machine
wagner wb – z 27

manufacturer: wagner
type: wb – z 27
mach.-nr.: 18274
year of construction: ??? / 10.2018 tüp.
comm.-nr.: 3999375/009
stock-nr.: 1903

+++ special price: old 3.390,- € | now 2.712,- €
+++ all prices are shown without taxes (net price)

 
technical data

(according to manufacturer)

cutting area: m6 – m 27 | r 1/8? – r 1? | w 1/4? – w 1?

10 spindle speeds: 68,5 – 168 u / min.
slide travel: 380 mm

 

drive power: 2,5 kw
weight: ca. 450 kg
standing area: w 1,40 x d 0,80 x h 1,10 m
color: green ral 6011

 
features

* thread-cutting head wagner z 27, self-opening
* 3 sets of chaser die holders
* various chasers
* chaser holder fastening ring for z 27
* cooling system
* splinter shoot
* operating manual for wagner head z 27

the rotational speeds of the spindle are changed by the transmission of the engine.

the cutting head is opened and closed by adjustable limit stops.


* if the year of construction has a “tüp.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tüb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation.    %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 20% !!! HORIZ. THREADING MACHINE WAGNER WB – Z 27 MANUFACTURER: WAGNER TYPE: WB – Z 27 MACH.-NR.: 18274 YEAR OF CONSTRUCTION: ??? / 10.2018 TüP. COMM.-NR.: 3999375/009 STOCK-NR.: 1903 +++ SPECIAL PRICE: OLD 3.390,- € | NOW 2.712,- € +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) TECHNICAL DATA (ACCORDING TO MANUFACTURER) CUTTING AREA: M6 – M 27 | R 1/8? – R 1? | W 1/4? – W 1? 10 SPINDLE SPEEDS: 68,5 – 168 U / MIN. SLIDE TRAVEL: 380 MM DRIVE POWER: 2,5 KW WEIGHT: CA. 450 KG STANDING AREA: W 1,40 X D 0,80 X H 1,10 M COLOR: GREEN RAL 6011 FEATURES * THREAD-CUTTING HEAD WAGNER Z 27, SELF-OPENING * 3 SETS OF CHASER DIE HOLDERS * VARIOUS CHASERS * CHASER HOLDER FASTENING RING FOR Z 27 * COOLING SYSTEM * SPLINTER SHOOT * OPERATING MANUAL FOR WAGNER HEAD Z 27 THE ROTATIONAL SPEEDS OF THE SPINDLE ARE CHANGED BY THE TRANSMISSION OF THE ENGINE. THE CUTTING HEAD IS OPENED AND CLOSED BY ADJUSTABLE LIMIT STOPS. * IF THE YEAR OF CONSTRUCTION HAS A “TüP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TüB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION.
Vendedor: ProHa Maschinen
Año de construcción: usado
Precio: 62.000 €
Ubicación: Land-description:<br />\nthe machine in good condition. compact installation dimensions, high speed possible (50.000bl / h)<br />\nchecking of:  2 side walls (another 2 side walls could be added)<br />\ninlet control, finish control, base control, outlet control, hf caustic and restdual liquid detection, separate module for external bottle recognition (height, contour, color) ..<br />\nyom. 2013. it was reconditioned in 2016 + modified.<br />\n<br />\nthe machine is still in operation until february 2019.<br />\n<br />\n<br />\ncapacity:<br />\n5000-50000<br />\n<br />\n<br />\n\r<br />\nbesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines.<br />\r\nyou have a first idea or even a concrete plan? it does not matter how far your project is, we support you in every phase!<br />\r\nor do you want to sell or market your machine? we also buy machines or provide you with a marketing concept.<br />\r\nask for your individual offer or visit us in knetzgau. concerning bigger projects we can of course also visit you in your company to do an on-site survey.<br />\r\nour drink technicians are working worldwide for our customers!<br />\r\nwe are looking forward to hearing from you.<br />\r\n<br />\r\nall information is supplied without guarantee. DESCRIPTION:
\NTHE MACHINE IN GOOD CONDITION. COMPACT INSTALLATION DIMENSIONS, HIGH SPEED POSSIBLE (50.000BL / H)
\NCHECKING OF: 2 SIDE WALLS (ANOTHER 2 SIDE WALLS COULD BE ADDED)
\NINLET CONTROL, FINISH CONTROL, BASE CONTROL, OUTLET CONTROL, HF CAUSTIC AND RESTDUAL LIQUID DETECTION, SEPARATE MODULE FOR EXTERNAL BOTTLE RECOGNITION (HEIGHT, CONTOUR, COLOR) ..
\NYOM. 2013. IT WAS RECONDITIONED IN 2016 + MODIFIED.
\N
\NTHE MACHINE IS STILL IN OPERATION UNTIL FEBRUARY 2019.
\N
\N
\NCAPACITY:
\N5000-50000
\N
\N
\N\R
\NBESIDES BUYING AND SELLING OF CONVEYORS AND MACHINES OUR STRENGTH LIES PARTICULARLY IN SERVICES AND PROJECT PLANNING, AS FOR EXAMPLE IN REBUILDING AND ADAPTING OF YOUR INSTALLATION AS WELL AS IN OVERHAUL AND RELOCATION OF MACHINES.
\R\NYOU HAVE A FIRST IDEA OR EVEN A CONCRETE PLAN? IT DOES NOT MATTER HOW FAR YOUR PROJECT IS, WE SUPPORT YOU IN EVERY PHASE!
\R\NOR DO YOU WANT TO SELL OR MARKET YOUR MACHINE? WE ALSO BUY MACHINES OR PROVIDE YOU WITH A MARKETING CONCEPT.
\R\NASK FOR YOUR INDIVIDUAL OFFER OR VISIT US IN KNETZGAU. CONCERNING BIGGER PROJECTS WE CAN OF COURSE ALSO VISIT YOU IN YOUR COMPANY TO DO AN ON-SITE SURVEY.
\R\NOUR DRINK TECHNICIANS ARE WORKING WORLDWIDE FOR OUR CUSTOMERS!
\R\NWE ARE LOOKING FORWARD TO HEARING FROM YOU.
\R\N
\R\NALL INFORMATION IS SUPPLIED WITHOUT GUARANTEE.
Vendedor: DRINK Getränkemaschinen GmbH
Año de construcción: usado
Ubicación: Land-year of construction: 2002
hours of operation machine: 52.500 h (22.10.2018)
maximum cutting force approx.: 220 kn
arb.ber. stamping operation approx.: 3000 x 1650 mm
control: siemens sinumerik 840 d
maximum sheet thickness approx.: 8 mm
space requirement approx.: 7600 x 7000 mm
approximate weight machine: 17,300 kg
power consumption: 29 kva

standard equipment
-stable, easily accessible c-frame
-coordinate guide with integrated linear magazine 21 places for tools and 4 places for clamps
-drives with maintenance-free drehstormmotoren
-automatic part slide 500 x 500 mm

punching head
-hydraulic mono - tool holder 360 â° rotation
for all tools, automatic tool length compensation, tool lubrication
-2 lubricant containers, programmable stripper motion, punching slug extraction
-programmable presser to set up with a low locking force

control
-open based sinumerik 840 d control system
-10.4 "tft color display
-diagnosis function
-graphics programming tops 2000
-integrated 3.5 "-floppy"
-bnc and rj45 network connector

security
-ce marking
-multi-beam photoelectric
-emergency shut-down hydraulic
-bulge detection

advanced cutting equipment
-function multi tool
-feature slots
-function thread forming
signing / fast beading
-function softpunch
-asc (advanced control stripper)

advanced machine equipment
-4 x single to ã¶ffnede clamps
-4 x hã¶henbewegliche clamping pratzen
-auto claw clamping
-sensor for slide of part of
-vibration-damped installation
-designation cylinder
-conveyors
-scratch-poor editing
-blowing device for small parts

technical data subject to change - subject to prior sale YEAR OF CONSTRUCTION: 2002 HOURS OF OPERATION MACHINE: 52.500 H (22.10.2018) MAXIMUM CUTTING FORCE APPROX.: 220 KN ARB.BER. STAMPING OPERATION APPROX.: 3000 X 1650 MM CONTROL: SIEMENS SINUMERIK 840 D MAXIMUM SHEET THICKNESS APPROX.: 8 MM SPACE REQUIREMENT APPROX.: 7600 X 7000 MM APPROXIMATE WEIGHT MACHINE: 17,300 KG POWER CONSUMPTION: 29 KVA STANDARD EQUIPMENT -STABLE, EASILY ACCESSIBLE C-FRAME -COORDINATE GUIDE WITH INTEGRATED LINEAR MAGAZINE 21 PLACES FOR TOOLS AND 4 PLACES FOR CLAMPS -DRIVES WITH MAINTENANCE-FREE DREHSTORMMOTOREN -AUTOMATIC PART SLIDE 500 X 500 MM PUNCHING HEAD -HYDRAULIC MONO - TOOL HOLDER 360 &ACIRC;&DEG; ROTATION FOR ALL TOOLS, AUTOMATIC TOOL LENGTH COMPENSATION, TOOL LUBRICATION -2 LUBRICANT CONTAINERS, PROGRAMMABLE STRIPPER MOTION, PUNCHING SLUG EXTRACTION -PROGRAMMABLE PRESSER TO SET UP WITH A LOW LOCKING FORCE CONTROL -OPEN BASED SINUMERIK 840 D CONTROL SYSTEM -10.4 "TFT COLOR DISPLAY -DIAGNOSIS FUNCTION -GRAPHICS PROGRAMMING TOPS 2000 -INTEGRATED 3.5 "-FLOPPY" -BNC AND RJ45 NETWORK CONNECTOR SECURITY -CE MARKING -MULTI-BEAM PHOTOELECTRIC -EMERGENCY SHUT-DOWN HYDRAULIC -BULGE DETECTION ADVANCED CUTTING EQUIPMENT -FUNCTION MULTI TOOL -FEATURE SLOTS -FUNCTION THREAD FORMING SIGNING / FAST BEADING -FUNCTION SOFTPUNCH -ASC (ADVANCED CONTROL STRIPPER) ADVANCED MACHINE EQUIPMENT -4 X SINGLE TO &ATILDE;&PARA;FFNEDE CLAMPS -4 X H&ATILDE;&PARA;HENBEWEGLICHE CLAMPING PRATZEN -AUTO CLAW CLAMPING -SENSOR FOR SLIDE OF PART OF -VIBRATION-DAMPED INSTALLATION -DESIGNATION CYLINDER -CONVEYORS -SCRATCH-POOR EDITING -BLOWING DEVICE FOR SMALL PARTS TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE
Vendedor: mteg GmbH
Año de construcción: usado
Ubicación: Land-faceplate diameter:2500 mm<br/>swing diameter:3000 mm<br/>turning height:1700 mm<br/>max. turning diameter:2800 mm<br/>weight of the machine ca.:53 t<br/><br/>chip conveyor coolant tank oil/water separator machine cover (high guarding) heat exchanger for electrical cabinet auto lubrication for guide way 4 jaw manual chuck 1600mm hydraulic unit bt50 tool connection in ram metal frame and case in machine shipment packing(wooden packing with metal base) 3 colors warning light chamber light anti- dropping in z axis -- auto motor brake system options installed air conditioner for cabinet coolant through spindle  filter for coolant water  ce mark  transformer FACEPLATE DIAMETER:2500 MM
SWING DIAMETER:3000 MM
TURNING HEIGHT:1700 MM
MAX. TURNING DIAMETER:2800 MM
WEIGHT OF THE MACHINE CA.:53 T

CHIP CONVEYOR COOLANT TANK OIL/WATER SEPARATOR MACHINE COVER (HIGH GUARDING) HEAT EXCHANGER FOR ELECTRICAL CABINET AUTO LUBRICATION FOR GUIDE WAY 4 JAW MANUAL CHUCK 1600MM HYDRAULIC UNIT BT50 TOOL CONNECTION IN RAM METAL FRAME AND CASE IN MACHINE SHIPMENT PACKING(WOODEN PACKING WITH METAL BASE) 3 COLORS WARNING LIGHT CHAMBER LIGHT ANTI- DROPPING IN Z AXIS -- AUTO MOTOR BRAKE SYSTEM OPTIONS INSTALLED AIR CONDITIONER FOR CABINET COOLANT THROUGH SPINDLE FILTER FOR COOLANT WATER CE MARK TRANSFORMER
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-27,684 operating hours
format
mini size: 50 mm
maximum format; 305 mm
printing width: 335 mm
max. speed: 12,500 cylinder revolutions / hr

screen printing
5 waterless offset
hot foil
flexo printing for painting
screen printing
relief embossing
diecutting

1 unwinding 1000 mm diameter
stork screen printer incl. base
registration trolley incl
automobile. color level control
5 waterless offset 14 '' (series design), automatic roller wash-up device
temperature control unit for the regulation of the printing units and the uv counter blades
1 format variable punching unit, rotating magnetic cylinder with punched plate, plate thickness: 0.44 mm
1 grid reel, max. diameter: 700 mm
1 wind, diameter; 700 mm
1 electrical equipment and control panel
1 longitudinal slitter with 4 knives
1 hot foil embossing unit incl
- 1 hot foil embosser machine
foil saving circuit
special pedestal with registration trolley
electronic equipment
oil heating unit
ability to 'rapid cooling' of the hotfoil cylinder by water cooling
- 1 clamping cylinder for magnesium sheets
1 flexographic coating unit
with base and register carriage, incl. paint pump
1 magnetic cylinder for flexowerk

8 uv drying, per station, fab. is, mbs 5
5 x printing units - 80 watts
3 x printing units - 120 watts (coating unit, screen printing)
radiator unit air-cooled
incl. cmk reflector, telescope slides and elc stepless power control
1 bst promark color video web inspection
type powerscope incl. integration
5 ap color boxes lever hzf 322-k, 16 zones with ceramised ductor
1 web cleaning on one side kelva label clean 2000 incl. integration
1 corona, made by vetaphone
type tou 4 incl. integration
1 gap master was retrofitted on hydra jack
gap master for variable punching depth adjustment 
'	1 electronic insetter for repeated passage of a pre-printed web
1 special vacuum unit after the flexowerk
1 eltex anti-static device with 2 power transformers
5 anti-static bars with cables and brackets
1 additional stork screen printing unit
1 rotary embossing station - relief embossing machine with magnet cylinder
 27,684 OPERATING HOURS FORMAT MINI SIZE: 50 MM MAXIMUM FORMAT; 305 MM PRINTING WIDTH: 335 MM MAX. SPEED: 12,500 CYLINDER REVOLUTIONS / HR SCREEN PRINTING 5 WATERLESS OFFSET HOT FOIL FLEXO PRINTING FOR PAINTING SCREEN PRINTING RELIEF EMBOSSING DIECUTTING 1 UNWINDING 1000 MM DIAMETER STORK SCREEN PRINTER INCL. BASE REGISTRATION TROLLEY INCL AUTOMOBILE. COLOR LEVEL CONTROL 5 WATERLESS OFFSET 14 '' (SERIES DESIGN), AUTOMATIC ROLLER WASH-UP DEVICE TEMPERATURE CONTROL UNIT FOR THE REGULATION OF THE PRINTING UNITS AND THE UV COUNTER BLADES 1 FORMAT VARIABLE PUNCHING UNIT, ROTATING MAGNETIC CYLINDER WITH PUNCHED PLATE, PLATE THICKNESS: 0.44 MM 1 GRID REEL, MAX. DIAMETER: 700 MM 1 WIND, DIAMETER; 700 MM 1 ELECTRICAL EQUIPMENT AND CONTROL PANEL 1 LONGITUDINAL SLITTER WITH 4 KNIVES 1 HOT FOIL EMBOSSING UNIT INCL - 1 HOT FOIL EMBOSSER MACHINE FOIL SAVING CIRCUIT SPECIAL PEDESTAL WITH REGISTRATION TROLLEY ELECTRONIC EQUIPMENT OIL HEATING UNIT ABILITY TO 'RAPID COOLING' OF THE HOTFOIL CYLINDER BY WATER COOLING - 1 CLAMPING CYLINDER FOR MAGNESIUM SHEETS 1 FLEXOGRAPHIC COATING UNIT WITH BASE AND REGISTER CARRIAGE, INCL. PAINT PUMP 1 MAGNETIC CYLINDER FOR FLEXOWERK 8 UV DRYING, PER STATION, FAB. IS, MBS 5 5 X PRINTING UNITS - 80 WATTS 3 X PRINTING UNITS - 120 WATTS (COATING UNIT, SCREEN PRINTING) RADIATOR UNIT AIR-COOLED INCL. CMK REFLECTOR, TELESCOPE SLIDES AND ELC STEPLESS POWER CONTROL 1 BST PROMARK COLOR VIDEO WEB INSPECTION TYPE POWERSCOPE INCL. INTEGRATION 5 AP COLOR BOXES LEVER HZF 322-K, 16 ZONES WITH CERAMISED DUCTOR 1 WEB CLEANING ON ONE SIDE KELVA LABEL CLEAN 2000 INCL. INTEGRATION 1 CORONA, MADE BY VETAPHONE TYPE TOU 4 INCL. INTEGRATION 1 GAP MASTER WAS RETROFITTED ON HYDRA JACK GAP MASTER FOR VARIABLE PUNCHING DEPTH ADJUSTMENT ' 1 ELECTRONIC INSETTER FOR REPEATED PASSAGE OF A PRE-PRINTED WEB 1 SPECIAL VACUUM UNIT AFTER THE FLEXOWERK 1 ELTEX ANTI-STATIC DEVICE WITH 2 POWER TRANSFORMERS 5 ANTI-STATIC BARS WITH CABLES AND BRACKETS 1 ADDITIONAL STORK SCREEN PRINTING UNIT 1 ROTARY EMBOSSING STATION - RELIEF EMBOSSING MACHINE WITH MAGNET CYLINDER
Vendedor: TMP Meurer Industry & Consult GmbH
Año de construcción: usado
Ubicación: Land-turning diameter:300 mm<br/>turning length:600 mm<br/>control:fanuc 0i td <br/>swing diameter over bed slide:320 mm<br/>swing over bed:520 mm<br/>spindle speeds:4500 1/min.<br/>spindle drive:11/15 kw<br/>coolant system: <br/>chip conveyor: <br/>heat exchanger: <br/>hollow chuck: <br/>turret:12-fach <br/>ce-design: <br/>tool setter: <br/>hard jaws: <br/>soft jaw: <br/><br/>brand new cnc turning center with    contains: 1. control system fanuc oi-td (8,4\ TURNING DIAMETER:300 MM
TURNING LENGTH:600 MM
CONTROL:FANUC 0I TD
SWING DIAMETER OVER BED SLIDE:320 MM
SWING OVER BED:520 MM
SPINDLE SPEEDS:4500 1/MIN.
SPINDLE DRIVE:11/15 KW
COOLANT SYSTEM:
CHIP CONVEYOR:
HEAT EXCHANGER:
HOLLOW CHUCK:
TURRET:12-FACH
CE-DESIGN:
TOOL SETTER:
HARD JAWS:
SOFT JAW:

BRAND NEW CNC TURNING CENTER WITH CONTAINS: 1. CONTROL SYSTEM FANUC OI-TD (8,4\" LCD MONITOR) 2. X/Z-AXIS STROKE 170/600 MM 3. X/Z-AXIS RAPID TRAVERSE 30/30 M/MIN 4. SPINDLE MOTOR 11 / 15 KW 5. SPINDLE SPEED 3500 RPM (BELT DRIVEN TYPE) 6. SPINDLE BEARING DIA. Ø 120 MM 7. BAR CAPACITY Ø DIA 64 MM) 8. HYDRAULIC HOLLOW CHUCK 10\" X 3 JAWS 9. HYD. UNIT FOR CHUCK WITH AIR COOLER 10. SERVO DRIVEN TURRET SYSTEM 12 STATIONS 11. MANUAL TAILSTOCK STROKE 500 MM + QUILL STROKE 100 MM 12. ELECTRICAL CABINET WITH HEAT EXCHANGER 13. STANDARD SPLASH GUIDE 14. COOLANT UNIT 15. TRANSFORMER (POWER SOURCE 380V) 16. CHIP CONVEYOR H=1100 MM WITH TROLLEY (CHAIN TYPE) 17. MACHINE COLOR TONGTAI WHITE/DARK GREY 18. SAFETY FOOT SWITCH 19. TRICOLOR LAMP 20. FANUC WARRANTY (WESTERN EUROPE) STANDARD ACCESSORIES 1. FACING TOOL HOLDERS X 2 PCS 2. O.D. TOOL GASKETS X 8 PCS 3. I.D. TOOL HOLDER (DIA 32 MM) X 4 PCS 4. BORING SLEEVE X 6 PCS (DIA 8, 10, 12, 16, 20, 25 MM) 5. DRILLING SLEEVE X 3 PCS (MT#1, 2, 3) 6. SOFT JAWS X 1 SET 7. ROTATING CENTER X 1 PC (MT#4) OPTIONS: 1. CE MARK 2. TOOL PRESETTER (MANUAL) 3. PARTS CATCHER 4. WORKPIECE CONVEYOR 5. BAR FEEDER INTERFACE 6. HARD JAWS X 1 SET 7. SOFT JAWS X 5 SETS 8. MANUAL GUIDE I FUNCTION + 10.4\" SCREEN
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-1. the presses

installed in 2005, these two berliner size presses ceased production in january 2018 and are now being offered as complete systems, or broken down to individual print units and reel stands to support the pagination requirements of a new owner. 

located in london, each press consists of eleven columns and contains a double folder for additional production flexibility. also available are the ancillary systems and plant which served the presses including ink, air and water handling machinery. 

the equipment here is in impeccable condition having been run at 30% of a design capacity of 80,000 copies per hour. everything on-site is still under power and available for viewing. 

2. the berliner format

the berliner format is midway between tabloid and broadsheet — sold folded with a page dimension of 470mm x 315mm. the equipment here can print in two sizes straight off the press: full berliner and half berliner. 
the print site is capable 8-80pp full berliner at full colour in single pass, and 16-160pp half berliner also at full colour in a single pass.

other sizes are possible on this equipment though they would require offline trimming. to support this we are also making available two muller martini ‘primera’ stitch-and-trim lines, providing additional capacity for magazine or supplementary production. 

while the berliner format is unique to our site here in the uk, globally the format is used for many other titles, including la stampa (italy), la vanguardia (spain) and le monde (france).

the format provides publishers with a host of advantages: from a production perspective  the size can offer significant long term savings on paper and ink. meanwhile for advertising, the size differentiates the paper from the rest of the market. 

by allowing publishers to signal broadsheet values while providing the convenience more associated with tabloid sizes, the berliner format is by no means a product of compromise, but rather a ‘best of both worlds’.      1. THE PRESSES INSTALLED IN 2005, THESE TWO BERLINER SIZE PRESSES CEASED PRODUCTION IN JANUARY 2018 AND ARE NOW BEING OFFERED AS COMPLETE SYSTEMS, OR BROKEN DOWN TO INDIVIDUAL PRINT UNITS AND REEL STANDS TO SUPPORT THE PAGINATION REQUIREMENTS OF A NEW OWNER. LOCATED IN LONDON, EACH PRESS CONSISTS OF ELEVEN COLUMNS AND CONTAINS A DOUBLE FOLDER FOR ADDITIONAL PRODUCTION FLEXIBILITY. ALSO AVAILABLE ARE THE ANCILLARY SYSTEMS AND PLANT WHICH SERVED THE PRESSES INCLUDING INK, AIR AND WATER HANDLING MACHINERY. THE EQUIPMENT HERE IS IN IMPECCABLE CONDITION HAVING BEEN RUN AT 30% OF A DESIGN CAPACITY OF 80,000 COPIES PER HOUR. EVERYTHING ON-SITE IS STILL UNDER POWER AND AVAILABLE FOR VIEWING. 2. THE BERLINER FORMAT THE BERLINER FORMAT IS MIDWAY BETWEEN TABLOID AND BROADSHEET — SOLD FOLDED WITH A PAGE DIMENSION OF 470MM X 315MM. THE EQUIPMENT HERE CAN PRINT IN TWO SIZES STRAIGHT OFF THE PRESS: FULL BERLINER AND HALF BERLINER. THE PRINT SITE IS CAPABLE 8-80PP FULL BERLINER AT FULL COLOUR IN SINGLE PASS, AND 16-160PP HALF BERLINER ALSO AT FULL COLOUR IN A SINGLE PASS. OTHER SIZES ARE POSSIBLE ON THIS EQUIPMENT THOUGH THEY WOULD REQUIRE OFFLINE TRIMMING. TO SUPPORT THIS WE ARE ALSO MAKING AVAILABLE TWO MULLER MARTINI ‘PRIMERA’ STITCH-AND-TRIM LINES, PROVIDING ADDITIONAL CAPACITY FOR MAGAZINE OR SUPPLEMENTARY PRODUCTION. WHILE THE BERLINER FORMAT IS UNIQUE TO OUR SITE HERE IN THE UK, GLOBALLY THE FORMAT IS USED FOR MANY OTHER TITLES, INCLUDING LA STAMPA (ITALY), LA VANGUARDIA (SPAIN) AND LE MONDE (FRANCE). THE FORMAT PROVIDES PUBLISHERS WITH A HOST OF ADVANTAGES: FROM A PRODUCTION PERSPECTIVE THE SIZE CAN OFFER SIGNIFICANT LONG TERM SAVINGS ON PAPER AND INK. MEANWHILE FOR ADVERTISING, THE SIZE DIFFERENTIATES THE PAPER FROM THE REST OF THE MARKET. BY ALLOWING PUBLISHERS TO SIGNAL BROADSHEET VALUES WHILE PROVIDING THE CONVENIENCE MORE ASSOCIATED WITH TABLOID SIZES, THE BERLINER FORMAT IS BY NO MEANS A PRODUCT OF COMPROMISE, BUT RATHER A ‘BEST OF BOTH WORLDS’.
Vendedor: PostIndustry
Año de construcción: usado
Ubicación: Land-x-travel:610 mm<br/>y-travel:410 mm<br/>z-travel:510 mm<br/>total power requirement:7,5 kw<br/>weight of the machine ca.:4400 kg<br/>with pallet-changer: <br/>cnc controller:fanuc 0i-md  <br/>automatic tool changer:24-fach <br/>heat exchanger: <br/>inner coolant:15 bar <br/>chip conveyor with chip bucket: <br/><br/>brand new cnc machining center with cnc control fanuc 0i md. financing also available.   contains:  1. control system fanuc 0i-md (8,4\ X-TRAVEL:610 MM
Y-TRAVEL:410 MM
Z-TRAVEL:510 MM
TOTAL POWER REQUIREMENT:7,5 KW
WEIGHT OF THE MACHINE CA.:4400 KG
WITH PALLET-CHANGER:
CNC CONTROLLER:FANUC 0I-MD
AUTOMATIC TOOL CHANGER:24-FACH
HEAT EXCHANGER:
INNER COOLANT:15 BAR
CHIP CONVEYOR WITH CHIP BUCKET:

BRAND NEW CNC MACHINING CENTER WITH CNC CONTROL FANUC 0I MD. FINANCING ALSO AVAILABLE. CONTAINS: 1. CONTROL SYSTEM FANUC 0I-MD (8,4\" LCD MONITOR) 2. WORKING PALLET SIZE 700 X 410 MM (EACH SIDE) 3. X/Y/Z-AXIS STROKE 610/410/510 MM 4. X/Y/Z AXIS RAPID TRAVERSE 36/36/30 M/MIN 5. SPINDLE MOTOR 5,5 / 7,5 KW (BELT DRIVE TYPE) 6. SPINDLE SPEED 8.000 RPM 7. SPINDLE NOSE NT#40 BT40) 8. ATC CAPACITY 24 TOOLS 9. AUTO PALLET CHANGER INDEX 0/180 DEGREE 10. ELECTRICAL CABINET WITH HEAT EXCHANGER 11. STANDARD SPLASH GUARD 12. MANUAL PULSE GENERATOR 13. COOLANT UNIT 14. TRANSFORMER (POWER SOURCE 380V) 15. RIGID TAPPING 16. HYDRAULIC UNIT 17. MACHINE COLOR TONGTAI GRAY/BLUE 18. FANUC WARRANTY (WESTERN EUROPE) OPTIONS: 1. CE MARK 2. BALANCE OF SPINDLE MOTOR 11/15 KW 3. SPINDLE MOTOR HIGH/LOW SPEED WINDING 4. COOLANT THROUGH SPINDLE WITH HIGH PRESSURE PUMT (15 5. FULL SPLASH GUARD 6. CHIP CONVEYOR H=1100 MM WITH TROLLEY (CHAIN TYPE) 7. MANUAL GUIDE I FUNCTION + 10,4\" LCD MONITOR
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 6.280 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 20% !!!


precision profile- & surface grinding machine jung hf 50 r
with autom. depth adjustment

manufacturer: jung
type: hf 50 r
mach.-nr.: 5048
year of construction: ??? / 09.2018 tüp.
comm.-nr.: 3990800/009
stock-nr.: 1901


+++ special price: old 7.850,- € | now 6.280,- €
+++ all prices are shown without taxes (net price)

 
technical data

(according to manufacturer)

technical data

(according to manufacturer)

grinding length: 600 mm
grinding width: 200 mm
table clamping surface: 600 x 200 mm

vertical feed

hydraulic, infinitely adjustable: 1 – 24 m / min.
hand wheel, 1 revolution moves table by: 110 mm

cross feed

hand wheel, 1 revolution moves table by: 4,0 mm
hand wheel with adjustable scale-ring and vernier, division: 0,02 mm
fine-cross feed, division: 0,01 mm
optical adjustment readable: 0,005 mm
automatic, infinitely adjustable: 0,1 – 1,8 mm

grinding wheel height adjustment
* 
hand wheel, 1 revolution moves grinding wheel by: 0,2 mm
hand wheel, division: 0,002 mm
fine adjustment, adjustable from: 0,001 mm – unlimited
tipp-adjustment, adjustable from: 0,001 – 0,01 mm
aut. depth adjustment, adjustable: 0,001 – 0,01 mm
rapid adjustment via electric motor: rapid traverse

grinding wheel

revolutions: 1.000 – 4.000 rpm, infinitely adjustable
grinding wheel dimensions surface grinding: 225 x 25 x 51 mm
grinding wheel dimensions profile grinding: 225 x 25 x 51 mm
 
drive power: 5,5 kw
weight: ca. 1.450 kg
standing area: w 1,70 x d 1,20 x h 1,70 m
color: blue / grey-white

 
features

* autom. depth adjustment with nonius bar and measuring clock 0,001 mm
* tipp-adjustment 0,001 mm for the vertical fine adjustment
* optical adjustment with projection for fine-adjustment with glass scale
* infinitely adjustable control actuator for grinding wheel
* rapid traverse for height adjustment
* additional fine adjustment for cross feed
* clamping device for the diagonal grinding sled, for plunge grinding
* electr. magnetic clamp plate 500 x 200 mm
* 2 electrical helper magnets = hm 20 = 200 x 75 x 75
* grinding wheel honing device with honing diamond
* grinding wheel flanges with wheel
* wet grinding installation
* additional water connector with hose and pistol for cleaning of magnetic plate
* adjustable splash guards
* central lubrication for the gliding trusses
* user manual for jung hf 50 r
* circuit plan for jung hf 50 r
* lubrication plan for jung hf 50 r
* 4 machine feet, adjustable in height


* if the year of construction has a “tuep.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tueb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation.      %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 20% !!! PRECISION PROFILE- & SURFACE GRINDING MACHINE JUNG HF 50 R WITH AUTOM. DEPTH ADJUSTMENT MANUFACTURER: JUNG TYPE: HF 50 R MACH.-NR.: 5048 YEAR OF CONSTRUCTION: ??? / 09.2018 TüP. COMM.-NR.: 3990800/009 STOCK-NR.: 1901 +++ SPECIAL PRICE: OLD 7.850,- € | NOW 6.280,- € +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) TECHNICAL DATA (ACCORDING TO MANUFACTURER) TECHNICAL DATA (ACCORDING TO MANUFACTURER) GRINDING LENGTH: 600 MM GRINDING WIDTH: 200 MM TABLE CLAMPING SURFACE: 600 X 200 MM VERTICAL FEED HYDRAULIC, INFINITELY ADJUSTABLE: 1 – 24 M / MIN. HAND WHEEL, 1 REVOLUTION MOVES TABLE BY: 110 MM CROSS FEED HAND WHEEL, 1 REVOLUTION MOVES TABLE BY: 4,0 MM HAND WHEEL WITH ADJUSTABLE SCALE-RING AND VERNIER, DIVISION: 0,02 MM FINE-CROSS FEED, DIVISION: 0,01 MM OPTICAL ADJUSTMENT READABLE: 0,005 MM AUTOMATIC, INFINITELY ADJUSTABLE: 0,1 – 1,8 MM GRINDING WHEEL HEIGHT ADJUSTMENT * HAND WHEEL, 1 REVOLUTION MOVES GRINDING WHEEL BY: 0,2 MM HAND WHEEL, DIVISION: 0,002 MM FINE ADJUSTMENT, ADJUSTABLE FROM: 0,001 MM – UNLIMITED TIPP-ADJUSTMENT, ADJUSTABLE FROM: 0,001 – 0,01 MM AUT. DEPTH ADJUSTMENT, ADJUSTABLE: 0,001 – 0,01 MM RAPID ADJUSTMENT VIA ELECTRIC MOTOR: RAPID TRAVERSE GRINDING WHEEL REVOLUTIONS: 1.000 – 4.000 RPM, INFINITELY ADJUSTABLE GRINDING WHEEL DIMENSIONS SURFACE GRINDING: 225 X 25 X 51 MM GRINDING WHEEL DIMENSIONS PROFILE GRINDING: 225 X 25 X 51 MM DRIVE POWER: 5,5 KW WEIGHT: CA. 1.450 KG STANDING AREA: W 1,70 X D 1,20 X H 1,70 M COLOR: BLUE / GREY-WHITE FEATURES * AUTOM. DEPTH ADJUSTMENT WITH NONIUS BAR AND MEASURING CLOCK 0,001 MM * TIPP-ADJUSTMENT 0,001 MM FOR THE VERTICAL FINE ADJUSTMENT * OPTICAL ADJUSTMENT WITH PROJECTION FOR FINE-ADJUSTMENT WITH GLASS SCALE * INFINITELY ADJUSTABLE CONTROL ACTUATOR FOR GRINDING WHEEL * RAPID TRAVERSE FOR HEIGHT ADJUSTMENT * ADDITIONAL FINE ADJUSTMENT FOR CROSS FEED * CLAMPING DEVICE FOR THE DIAGONAL GRINDING SLED, FOR PLUNGE GRINDING * ELECTR. MAGNETIC CLAMP PLATE 500 X 200 MM * 2 ELECTRICAL HELPER MAGNETS = HM 20 = 200 X 75 X 75 * GRINDING WHEEL HONING DEVICE WITH HONING DIAMOND * GRINDING WHEEL FLANGES WITH WHEEL * WET GRINDING INSTALLATION * ADDITIONAL WATER CONNECTOR WITH HOSE AND PISTOL FOR CLEANING OF MAGNETIC PLATE * ADJUSTABLE SPLASH GUARDS * CENTRAL LUBRICATION FOR THE GLIDING TRUSSES * USER MANUAL FOR JUNG HF 50 R * CIRCUIT PLAN FOR JUNG HF 50 R * LUBRICATION PLAN FOR JUNG HF 50 R * 4 MACHINE FEET, ADJUSTABLE IN HEIGHT * IF THE YEAR OF CONSTRUCTION HAS A “TUEP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TUEB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION.
Vendedor: ProHa Maschinen
Año de construcción: usado
Ubicación: tool holder:90°, 2 stück, vdi 40
tool holder:gerade, 2 stück,vdi 40
hard jaws:1 satz
signal lamp:
halogen lamp:
soft jaw:1 satz
live center:4 mk
chip conveyor with chip bucket:
c-axis:0,001°
coolant system:
heat exchanger for electr. cabinet:
fully enclosed:
hydraulic unit:
3-jaw hydraulic chuck:200mm mit lufkühler
tool setter:manuell

brand new cnc slant bed lathe with 1. control system fanuc oi-td (8,4\" lcd monitor) 2. x/z-axis stroke 170/600 mm 3. x/z-axis rapid traverse 30/30 m/min 4. spindle motor 11 / 15 kw 5. spindle speed 4500 rpm (belt driven type) 6. spindle bearing dia. Ø 100 mm 7. bar capacity Ø dia 51 mm) 8. hydraulic hollow chuck 8\" x 3 jaws 9. hyd. unit for chuck with air cooler 10. servo driven turret system 12 stations 11. manual tailstock stroke 500 mm + quill stroke 100 mm 12. electrical cabinet with heat exchanger 13. standard splash guide 14. coolant unit 15. transformer (power source 380v) 16. chip conveyor h=1100 mm with trolley (chain type) 17. machine color tongtai white/dark grey 18. safety foot switch 19. tricolor lamp 20. fanuc warranty (western europe) standard accessories 1. facing tool holders x 2 pcs 2. o.d. tool gaskets x 8 pcs 3. i.d. tool holder (dia 32 mm) x 4 pcs 4. boring sleeve x 6 pcs (dia 8, 10, 12, 16, 20, 25 mm) 5. drilling sleeve x 3 pcs (mt#1, 2, 3) 6. soft jaws x 1 set 7. rotating center x 1 pc (mt#4) installed options: 1. ce mark 2. tool presetter (manual) 3. parts catcher 4. workpiece conveyor 5. bar feeder interface 6. hard jaws x 1 set 7. soft jaws x 5 sets 8. manual guide i function + 10.4\" screen warranty: 12 months on parts machine is made by the biggest maker of machine tools in taiwan, also builiding for wellknown japanese makers..gif" alt="Land-turning diameter:520 mm
turning length:500 mm
control:fanuc 0i-tf
turning diameter over bed slide:320 mm
max. swing diameter:520 mm
spindle speeds:4500 1/min.
spindle passage:51 mm
spindle drive:15/11 kw
c-axis:0,001 °
tool turret:12-fach mit bmt-65 radial, vdi40 _
feed stepless:0,001-5000 mm/u
travel -x axis:200 mm
travel - z:600 mm
rapid power traverse in x-and z direction:30 m/min
taper in tailstock:4 mk
tailstock quill stroke:100 mm
tailstock adjustment:500 mm
weight of the machine ca.:4000 kg
overall size:3,6x2,1x2,4 m
ce-design:
cnc controller:fanuc 0i-tf + manual guide i + 10.4\" lcd
tool holder:90°, 2 stück, vdi 40
tool holder:gerade, 2 stück,vdi 40
hard jaws:1 satz
signal lamp:
halogen lamp:
soft jaw:1 satz
live center:4 mk
chip conveyor with chip bucket:
c-axis:0,001°
coolant system:
heat exchanger for electr. cabinet:
fully enclosed:
hydraulic unit:
3-jaw hydraulic chuck:200mm mit lufkühler
tool setter:manuell

brand new cnc slant bed lathe with 1. control system fanuc oi-td (8,4\" lcd monitor) 2. x/z-axis stroke 170/600 mm 3. x/z-axis rapid traverse 30/30 m/min 4. spindle motor 11 / 15 kw 5. spindle speed 4500 rpm (belt driven type) 6. spindle bearing dia. Ø 100 mm 7. bar capacity Ø dia 51 mm) 8. hydraulic hollow chuck 8\" x 3 jaws 9. hyd. unit for chuck with air cooler 10. servo driven turret system 12 stations 11. manual tailstock stroke 500 mm + quill stroke 100 mm 12. electrical cabinet with heat exchanger 13. standard splash guide 14. coolant unit 15. transformer (power source 380v) 16. chip conveyor h=1100 mm with trolley (chain type) 17. machine color tongtai white/dark grey 18. safety foot switch 19. tricolor lamp 20. fanuc warranty (western europe) standard accessories 1. facing tool holders x 2 pcs 2. o.d. tool gaskets x 8 pcs 3. i.d. tool holder (dia 32 mm) x 4 pcs 4. boring sleeve x 6 pcs (dia 8, 10, 12, 16, 20, 25 mm) 5. drilling sleeve x 3 pcs (mt#1, 2, 3) 6. soft jaws x 1 set 7. rotating center x 1 pc (mt#4) installed options: 1. ce mark 2. tool presetter (manual) 3. parts catcher 4. workpiece conveyor 5. bar feeder interface 6. hard jaws x 1 set 7. soft jaws x 5 sets 8. manual guide i function + 10.4\" screen warranty: 12 months on parts machine is made by the biggest maker of machine tools in taiwan, also builiding for wellknown japanese makers." style="height: 18px;"> TURNING DIAMETER:520 MM
TURNING LENGTH:500 MM
CONTROL:FANUC 0I-TF
TURNING DIAMETER OVER BED SLIDE:320 MM
MAX. SWING DIAMETER:520 MM
SPINDLE SPEEDS:4500 1/MIN.
SPINDLE PASSAGE:51 MM
SPINDLE DRIVE:15/11 KW
C-AXIS:0,001 °
TOOL TURRET:12-FACH MIT BMT-65 RADIAL, VDI40 _
FEED STEPLESS:0,001-5000 MM/U
TRAVEL -X AXIS:200 MM
TRAVEL - Z:600 MM
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:30 M/MIN
TAPER IN TAILSTOCK:4 MK
TAILSTOCK QUILL STROKE:100 MM
TAILSTOCK ADJUSTMENT:500 MM
WEIGHT OF THE MACHINE CA.:4000 KG
OVERALL SIZE:3,6X2,1X2,4 M
CE-DESIGN:
CNC CONTROLLER:FANUC 0I-TF + MANUAL GUIDE I + 10.4\" LCD
TOOL HOLDER:90°, 2 STüCK, VDI 40
TOOL HOLDER:GERADE, 2 STüCK,VDI 40
HARD JAWS:1 SATZ
SIGNAL LAMP:
HALOGEN LAMP:
SOFT JAW:1 SATZ
LIVE CENTER:4 MK
CHIP CONVEYOR WITH CHIP BUCKET:
C-AXIS:0,001°
COOLANT SYSTEM:
HEAT EXCHANGER FOR ELECTR. CABINET:
FULLY ENCLOSED:
HYDRAULIC UNIT:
3-JAW HYDRAULIC CHUCK:200MM MIT LUFKüHLER
TOOL SETTER:MANUELL

BRAND NEW CNC SLANT BED LATHE WITH 1. CONTROL SYSTEM FANUC OI-TD (8,4\" LCD MONITOR) 2. X/Z-AXIS STROKE 170/600 MM 3. X/Z-AXIS RAPID TRAVERSE 30/30 M/MIN 4. SPINDLE MOTOR 11 / 15 KW 5. SPINDLE SPEED 4500 RPM (BELT DRIVEN TYPE) 6. SPINDLE BEARING DIA. Ø 100 MM 7. BAR CAPACITY Ø DIA 51 MM) 8. HYDRAULIC HOLLOW CHUCK 8\" X 3 JAWS 9. HYD. UNIT FOR CHUCK WITH AIR COOLER 10. SERVO DRIVEN TURRET SYSTEM 12 STATIONS 11. MANUAL TAILSTOCK STROKE 500 MM + QUILL STROKE 100 MM 12. ELECTRICAL CABINET WITH HEAT EXCHANGER 13. STANDARD SPLASH GUIDE 14. COOLANT UNIT 15. TRANSFORMER (POWER SOURCE 380V) 16. CHIP CONVEYOR H=1100 MM WITH TROLLEY (CHAIN TYPE) 17. MACHINE COLOR TONGTAI WHITE/DARK GREY 18. SAFETY FOOT SWITCH 19. TRICOLOR LAMP 20. FANUC WARRANTY (WESTERN EUROPE) STANDARD ACCESSORIES 1. FACING TOOL HOLDERS X 2 PCS 2. O.D. TOOL GASKETS X 8 PCS 3. I.D. TOOL HOLDER (DIA 32 MM) X 4 PCS 4. BORING SLEEVE X 6 PCS (DIA 8, 10, 12, 16, 20, 25 MM) 5. DRILLING SLEEVE X 3 PCS (MT#1, 2, 3) 6. SOFT JAWS X 1 SET 7. ROTATING CENTER X 1 PC (MT#4) INSTALLED OPTIONS: 1. CE MARK 2. TOOL PRESETTER (MANUAL) 3. PARTS CATCHER 4. WORKPIECE CONVEYOR 5. BAR FEEDER INTERFACE 6. HARD JAWS X 1 SET 7. SOFT JAWS X 5 SETS 8. MANUAL GUIDE I FUNCTION + 10.4\" SCREEN WARRANTY: 12 MONTHS ON PARTS MACHINE IS MADE BY THE BIGGEST MAKER OF MACHINE TOOLS IN TAIWAN, ALSO BUILIDING FOR WELLKNOWN JAPANESE MAKERS.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 2.920 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 20% !!!


horiz. threading machine wagner wb - z 39

manufacturer: wagner
type: wb - z 39
head-nr.: z39/73100
mach.-nr.: 88052
year of construction: ??? / 08.2018 tüp.
comm.-nr.: 3999375/009
stock-nr.: 1906


+++ special price: old 3.650,- € | now 2.920,- €
+++ all prices are shown without taxes (net price)

 
technical data

(according to manufacturer)

cutting area: m6 – m39 | r 1/4? – r 1 1/2? | w 3/4? – w 1 1/2?

6 spindle speeds: 40 – 220 u / min.
slide travel: 300 mm

 
drive power: 3,0 kw
weight: ca. 750 kg
standing area: w 1,60 x d 0,80 x h 1,25 m
color: green ral 6011

 
features

* thread-cutting head wagner z 39, self-opening
* 3 sets of chaser die holders
* various chasers
* vert. tapper with quick clamping mechanism
* chaser holder fastening ring for z 39
* cooling system
* splinter shoot
* operating manual for wagner head z 39

the rotational speeds of the spindle are changed by the transmission of the engine.

the cutting head is opened and closed by adjustable limit stops.


* if the year of construction has a “tuep.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tueb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation.         %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 20% !!! HORIZ. THREADING MACHINE WAGNER WB - Z 39 MANUFACTURER: WAGNER TYPE: WB - Z 39 HEAD-NR.: Z39/73100 MACH.-NR.: 88052 YEAR OF CONSTRUCTION: ??? / 08.2018 TüP. COMM.-NR.: 3999375/009 STOCK-NR.: 1906 +++ SPECIAL PRICE: OLD 3.650,- € | NOW 2.920,- € +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) TECHNICAL DATA (ACCORDING TO MANUFACTURER) CUTTING AREA: M6 – M39 | R 1/4? – R 1 1/2? | W 3/4? – W 1 1/2? 6 SPINDLE SPEEDS: 40 – 220 U / MIN. SLIDE TRAVEL: 300 MM DRIVE POWER: 3,0 KW WEIGHT: CA. 750 KG STANDING AREA: W 1,60 X D 0,80 X H 1,25 M COLOR: GREEN RAL 6011 FEATURES * THREAD-CUTTING HEAD WAGNER Z 39, SELF-OPENING * 3 SETS OF CHASER DIE HOLDERS * VARIOUS CHASERS * VERT. TAPPER WITH QUICK CLAMPING MECHANISM * CHASER HOLDER FASTENING RING FOR Z 39 * COOLING SYSTEM * SPLINTER SHOOT * OPERATING MANUAL FOR WAGNER HEAD Z 39 THE ROTATIONAL SPEEDS OF THE SPINDLE ARE CHANGED BY THE TRANSMISSION OF THE ENGINE. THE CUTTING HEAD IS OPENED AND CLOSED BY ADJUSTABLE LIMIT STOPS. * IF THE YEAR OF CONSTRUCTION HAS A “TUEP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TUEB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION.
Vendedor: ProHa Maschinen
Año de construcción: usado
Ubicación: Land-x-travel:610 mm<br/>y-travel:580 mm<br/>z-travel:580 mm<br/>distance spindle nose and table:70-650 mm<br/>distance spindle center to table:80-660 mm<br/>table height over floor:1150 mm<br/>pallet table size:400x400 mm<br/>max. workpiece weight:400x2 kg<br/>table - indexing:1° (optional 0,001°) <br/>spindle speeds:12000 1/min<br/>spindle drive:22/25 kw<br/>spindle speed steps:2 <br/>spindle nose:40 sk/bt<br/>spindle bearing diameter:75 mm<br/>rapid speed:60 m/min<br/>feeds:1-20000 mm/u<br/>tool taper:40 sk/bt<br/>tool changer:60 fach<br/>tool diameter:75 mm<br/>weight of tools max.:12 kg<br/>workpiece length:410 mm<br/>number of pallets:2 <br/>compressed air volume:400 l/min<br/>coolant tank:550 l<br/>hydraulic tank:30 l<br/>lubrication tank:2 l<br/>total power requirement:45 kva<br/>weight of the machine ca.:9500 kg<br/>cnc controller:siemens/fanuc/heidenhain <br/>automatic tool changer:60 fach<br/>cnc rotary table:1 °<br/>inner coolant:20 bar<br/>chip conveyor - auger: <br/>chip conveyor with chip bucket: <br/>: <br/>: <br/>ce-design: <br/>ce-certificate: <br/>servo motors:vom steuerungshersteller <br/>atc:80/120 <br/>cts:35 oder 70 bar <br/>linear scales: <br/>cnc controls from:siemens/fanuc/heidenhain <br/>tool measuring system:von renishaw <br/>workpiece measurement system:von renishaw <br/>chip conveyor and trolley:mit magnetabscheider <br/>automatic pallet changer apc:8-fach <br/>cnc-rotary table:0,001 grad indexierung  <br/><br/>brand new horizontal machining center with:   contains:  1. control system fanuc oi-mf (10.4\ X-TRAVEL:610 MM
Y-TRAVEL:580 MM
Z-TRAVEL:580 MM
DISTANCE SPINDLE NOSE AND TABLE:70-650 MM
DISTANCE SPINDLE CENTER TO TABLE:80-660 MM
TABLE HEIGHT OVER FLOOR:1150 MM
PALLET TABLE SIZE:400X400 MM
MAX. WORKPIECE WEIGHT:400X2 KG
TABLE - INDEXING:1° (OPTIONAL 0,001°)
SPINDLE SPEEDS:12000 1/MIN
SPINDLE DRIVE:22/25 KW
SPINDLE SPEED STEPS:2
SPINDLE NOSE:40 SK/BT
SPINDLE BEARING DIAMETER:75 MM
RAPID SPEED:60 M/MIN
FEEDS:1-20000 MM/U
TOOL TAPER:40 SK/BT
TOOL CHANGER:60 FACH
TOOL DIAMETER:75 MM
WEIGHT OF TOOLS MAX.:12 KG
WORKPIECE LENGTH:410 MM
NUMBER OF PALLETS:2
COMPRESSED AIR VOLUME:400 L/MIN
COOLANT TANK:550 L
HYDRAULIC TANK:30 L
LUBRICATION TANK:2 L
TOTAL POWER REQUIREMENT:45 KVA
WEIGHT OF THE MACHINE CA.:9500 KG
CNC CONTROLLER:SIEMENS/FANUC/HEIDENHAIN
AUTOMATIC TOOL CHANGER:60 FACH
CNC ROTARY TABLE:1 °
INNER COOLANT:20 BAR
CHIP CONVEYOR - AUGER:
CHIP CONVEYOR WITH CHIP BUCKET:
:
:
CE-DESIGN:
CE-CERTIFICATE:
SERVO MOTORS:VOM STEUERUNGSHERSTELLER
ATC:80/120
CTS:35 ODER 70 BAR
LINEAR SCALES:
CNC CONTROLS FROM:SIEMENS/FANUC/HEIDENHAIN
TOOL MEASURING SYSTEM:VON RENISHAW
WORKPIECE MEASUREMENT SYSTEM:VON RENISHAW
CHIP CONVEYOR AND TROLLEY:MIT MAGNETABSCHEIDER
AUTOMATIC PALLET CHANGER APC:8-FACH
CNC-ROTARY TABLE:0,001 GRAD INDEXIERUNG

BRAND NEW HORIZONTAL MACHINING CENTER WITH: CONTAINS: 1. CONTROL SYSTEM FANUC OI-MF (10.4\" SCREEN) 2. WORKING TABLE SIZE: 400 X 400 MM 3. MAX. WORKPIECE DIMENSION: DIA. 630 X H 800 MM 4. MAX. TABLE LOAD CAPACITY: 400 KGS X 2 PALLETS 5. SPINDLE CENTER TO TABLE SURFACE: 80 ~ 660 MM 6. TABLE CENTER TO SPINDLE NOSE: 70 ~ 650 MM 7. X/Y/Z STROKE 610/580/580 MM 8. X/Y/Z STROKE RAPID TRAVERSE: 60/60/60 M/MIN 9. SPINDLE MOTOR 22/25 KW (BUILT-IN TYPE) 10. SPINDLE SPEED 12000 RPM WITH SPINDLE COOLER 11. SPINDLE NOSE NT#40 (BT40) 12. ATC CAPACITY 60 TOOLS 13. COOLANT UNIT (REAR SIDE OF MACHINE) 14. COOLANT THRU. SPINDLE W/H HIGH PRESSURE PUMP (20BAR) AND FILTER SYSTEM (A TYPE) 15. FULL SPLASH COVER 16. ROTART TYPE APC UNIT X 2 WORKING PALLETS (400X400MM) 17. 4TH AXIS (B-AXIS) FUNCTION INDEX 1 DEGREE POSITIONING 18. ELECTRIC CABINET WITH HEAT EXCHANGER 19. TRANSFORMER (POWER SOURCE 380V) 20. RIGID TAPPING 21. MANUAL PULSE GENERATOR 22. CHIP CONVEYOR H=1100 MM WITH TROLLEY (INTEGRATED TYPE)ON THE REAR SIDE 23. AUGER TYPE CHIP SCREWS INSIDE OF MACHINE BED 24. NEW DESIGN MACHINE COVER & COLOR SCHEME 25. FANUC WARRANTY OPTIONS: 1. CE MARK 2. BALANCE OF 4TH AXIS (B-AXIS) INDEX 0.001 POSITIONING 3. COOLANT GUN WITH ON/OFF SWITCH 4. OIL SKIMMER (DISC TYPE) 5. MANUAL GUIDE I FUNCTION
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 20.900 €
Ubicación: Land-edgebander bi-matic prima 7.3 r.a.. in full equipment
very nice one dough er machine with extensive facilities and in near mint condition

edge thickness approx. 0,4-3 mm
workpiece height approx. 8-40 mm
feed about 5, 5 m / min
noise guard
pull-out workpiece support
suction connection 1 x 150 mm, 1 x 80 mm
touch screen control system with color display

aggregates:
top pressure manual adjustment

infeed fence (manual adjustment with siku counter)

fuegefraesen with slide cutters, freshly sharpened

quick heating pool

gluing unit with automatic edge feeder roll material up to 3 mm

pressure zone with 3 rolls

caps with two motors, 2 new blades

radius milling unit, r2, freshly sharpened

corner copy unit, r2, new mills

radius scraper with r2 with new removable disk

glue joint scraper with new removable disk

buffing unit with new buffing wheels

sprayer for cleaning-supplies

hood latch
ce mark
operating instructions

all tools of the machine are new or sharpened, machine is directly accessible.

an operating hours counter does not exist, but the machine has edited so far about 42500 workpieces and approached 33500 m edge.

machine dimensions approx. 3950 (with plate) x 1000 x 1650mm (lxwxh), length without edge plate 3500 mm.
weight approx. 900kg.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". EDGEBANDER BI-MATIC PRIMA 7.3 R.A.. IN FULL EQUIPMENT VERY NICE ONE DOUGH ER MACHINE WITH EXTENSIVE FACILITIES AND IN NEAR MINT CONDITION EDGE THICKNESS APPROX. 0,4-3 MM WORKPIECE HEIGHT APPROX. 8-40 MM FEED ABOUT 5, 5 M / MIN NOISE GUARD PULL-OUT WORKPIECE SUPPORT SUCTION CONNECTION 1 X 150 MM, 1 X 80 MM TOUCH SCREEN CONTROL SYSTEM WITH COLOR DISPLAY AGGREGATES: TOP PRESSURE MANUAL ADJUSTMENT INFEED FENCE (MANUAL ADJUSTMENT WITH SIKU COUNTER) FUEGEFRAESEN WITH SLIDE CUTTERS, FRESHLY SHARPENED QUICK HEATING POOL GLUING UNIT WITH AUTOMATIC EDGE FEEDER ROLL MATERIAL UP TO 3 MM PRESSURE ZONE WITH 3 ROLLS CAPS WITH TWO MOTORS, 2 NEW BLADES RADIUS MILLING UNIT, R2, FRESHLY SHARPENED CORNER COPY UNIT, R2, NEW MILLS RADIUS SCRAPER WITH R2 WITH NEW REMOVABLE DISK GLUE JOINT SCRAPER WITH NEW REMOVABLE DISK BUFFING UNIT WITH NEW BUFFING WHEELS SPRAYER FOR CLEANING-SUPPLIES HOOD LATCH CE MARK OPERATING INSTRUCTIONS ALL TOOLS OF THE MACHINE ARE NEW OR SHARPENED, MACHINE IS DIRECTLY ACCESSIBLE. AN OPERATING HOURS COUNTER DOES NOT EXIST, BUT THE MACHINE HAS EDITED SO FAR ABOUT 42500 WORKPIECES AND APPROACHED 33500 M EDGE. MACHINE DIMENSIONS APPROX. 3950 (WITH PLATE) X 1000 X 1650MM (LXWXH), LENGTH WITHOUT EDGE PLATE 3500 MM. WEIGHT APPROX. 900KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Ubicación: rigid tapping:
ce-design:
high speed directl spindle motor:12000 1/min
spindle coolant system:
inner coolant:20 bar
chip conveyor with chip bucket:
fully enclosed:
chip conveyor - auger:im bett
coolant system:
:
:
air conditioner for cabinet:
metrical version, 380v 50 hz 3 phases:

brandnew machine with: 1. control system siemens 828d (10.4\" lcd+shopmill) 2. working table size: 600 x 400 mm 3. max. table load capacity: 250 kgs 4. spindle speed 12.000rpm (direct driven typ) 5. spindle motor 5.8 kw (1ph8087) 6. spindle nose bbt 30 7. x/y/z stroke 510/400/300 mm 8. x/y/z stroke rapid traverse: 60/60/60 m/min 9. atc capacity 16 tools (disc type) 10. standard splash guard 11. electrical cabinet with heat exchanger 12. coolant unit 13. manual pulse generator 14. ridgid tapping 15. without transformer (power source 380 volt) 16. bed flushing coolant with high pressure pump 17. without auger type chip screws inside of machine bed 18. new design machine cover and color scheme (blue tone) 19. siemens warranty options: 1. ce mark 2. auto tool-taper washing 3. spindle cooler 4. direct-coupled spindle 12.000 rpm for cts 5. spindle motor for cts (1ph8087-1sn023la1) 6. cts with high pressure 20 bar 7. full sealing cover type 8. chip conveyor h=1100 mm with trolley (chain type) 9. a/c for electrical cabinet 10. coolant level detector 11. rear cover 12. coolant gun & air gun 13. dual chip auger .gif" alt="Land-x-travel:510 mm
y-travel:400 mm
z-travel:350 mm
table-size:600x400 mm
spindle speeds:12000 1/min.
spindle drive:5,8 kw
spindle taper:30 bbt
rapid traverse in x-y-z axis:60 m/min
tool changer:16 fach
weight of the machine ca.:2,8 t
cnc controller:siemens 828d (10.4\" lcd+shopmill)
rigid tapping:
ce-design:
high speed directl spindle motor:12000 1/min
spindle coolant system:
inner coolant:20 bar
chip conveyor with chip bucket:
fully enclosed:
chip conveyor - auger:im bett
coolant system:
:
:
air conditioner for cabinet:
metrical version, 380v 50 hz 3 phases:

brandnew machine with: 1. control system siemens 828d (10.4\" lcd+shopmill) 2. working table size: 600 x 400 mm 3. max. table load capacity: 250 kgs 4. spindle speed 12.000rpm (direct driven typ) 5. spindle motor 5.8 kw (1ph8087) 6. spindle nose bbt 30 7. x/y/z stroke 510/400/300 mm 8. x/y/z stroke rapid traverse: 60/60/60 m/min 9. atc capacity 16 tools (disc type) 10. standard splash guard 11. electrical cabinet with heat exchanger 12. coolant unit 13. manual pulse generator 14. ridgid tapping 15. without transformer (power source 380 volt) 16. bed flushing coolant with high pressure pump 17. without auger type chip screws inside of machine bed 18. new design machine cover and color scheme (blue tone) 19. siemens warranty options: 1. ce mark 2. auto tool-taper washing 3. spindle cooler 4. direct-coupled spindle 12.000 rpm for cts 5. spindle motor for cts (1ph8087-1sn023la1) 6. cts with high pressure 20 bar 7. full sealing cover type 8. chip conveyor h=1100 mm with trolley (chain type) 9. a/c for electrical cabinet 10. coolant level detector 11. rear cover 12. coolant gun & air gun 13. dual chip auger " style="height: 18px;"> X-TRAVEL:510 MM
Y-TRAVEL:400 MM
Z-TRAVEL:350 MM
TABLE-SIZE:600X400 MM
SPINDLE SPEEDS:12000 1/MIN.
SPINDLE DRIVE:5,8 KW
SPINDLE TAPER:30 BBT
RAPID TRAVERSE IN X-Y-Z AXIS:60 M/MIN
TOOL CHANGER:16 FACH
WEIGHT OF THE MACHINE CA.:2,8 T
CNC CONTROLLER:SIEMENS 828D (10.4\" LCD+SHOPMILL)
RIGID TAPPING:
CE-DESIGN:
HIGH SPEED DIRECTL SPINDLE MOTOR:12000 1/MIN
SPINDLE COOLANT SYSTEM:
INNER COOLANT:20 BAR
CHIP CONVEYOR WITH CHIP BUCKET:
FULLY ENCLOSED:
CHIP CONVEYOR - AUGER:IM BETT
COOLANT SYSTEM:
:
:
AIR CONDITIONER FOR CABINET:
METRICAL VERSION, 380V 50 HZ 3 PHASES:

BRANDNEW MACHINE WITH: 1. CONTROL SYSTEM SIEMENS 828D (10.4\" LCD+SHOPMILL) 2. WORKING TABLE SIZE: 600 X 400 MM 3. MAX. TABLE LOAD CAPACITY: 250 KGS 4. SPINDLE SPEED 12.000RPM (DIRECT DRIVEN TYP) 5. SPINDLE MOTOR 5.8 KW (1PH8087) 6. SPINDLE NOSE BBT 30 7. X/Y/Z STROKE 510/400/300 MM 8. X/Y/Z STROKE RAPID TRAVERSE: 60/60/60 M/MIN 9. ATC CAPACITY 16 TOOLS (DISC TYPE) 10. STANDARD SPLASH GUARD 11. ELECTRICAL CABINET WITH HEAT EXCHANGER 12. COOLANT UNIT 13. MANUAL PULSE GENERATOR 14. RIDGID TAPPING 15. WITHOUT TRANSFORMER (POWER SOURCE 380 VOLT) 16. BED FLUSHING COOLANT WITH HIGH PRESSURE PUMP 17. WITHOUT AUGER TYPE CHIP SCREWS INSIDE OF MACHINE BED 18. NEW DESIGN MACHINE COVER AND COLOR SCHEME (BLUE TONE) 19. SIEMENS WARRANTY OPTIONS: 1. CE MARK 2. AUTO TOOL-TAPER WASHING 3. SPINDLE COOLER 4. DIRECT-COUPLED SPINDLE 12.000 RPM FOR CTS 5. SPINDLE MOTOR FOR CTS (1PH8087-1SN023LA1) 6. CTS WITH HIGH PRESSURE 20 BAR 7. FULL SEALING COVER TYPE 8. CHIP CONVEYOR H=1100 MM WITH TROLLEY (CHAIN TYPE) 9. A/C FOR ELECTRICAL CABINET 10. COOLANT LEVEL DETECTOR 11. REAR COVER 12. COOLANT GUN & AIR GUN 13. DUAL CHIP AUGER
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 1.560 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 20% !!!


mech. horiz. surface grinding machine haarmann ae-universal

manufacturer: haarmann
type: ae-universal
mach.-nr.: 8030
year of construction: ??? / 07.2018 tüp.
comm.-nr.: 3990200/009
stock-nr.: 1898


+++ special price: old 1.950,- € | now 1.560,- €
+++ all prices are shown without taxes (net price)

 
technical data
(according to manufacturer)

table clamping area: 620 x 110 mm
max. grinding wheel length: 200 mm
max. grinding wheel width: 170 mm
max. distance between table and center of spindle: 350 mm

linear table feed

largest table hub: 250 mm

table cross-feed

largest cross-feed: 200 mm

cross-feed

1 turn on hand-wheel: 5,08 mm
1 digit on hand-wheel: 0,01 mm

grinding spindle movement in vertical direction

largest distance between table and grinding spindle – middle: 350 mm

vertical feed

1 turn on hand-wheel: 5,08 mm
1 digit on hand-wheel: 0,01 mm

grinding wheel

speed: 2.700 rpm
largest Ø: 140 mm
largest width: 15 mm
bore: 20/32 mm

drive power: 0,5 kw
weight: ca. 100 kg
standing area: w 0,70 x d 0,60 x h 1,60 m
color: blue / grey-white


features

* hand-fine adjustment = 0,01 mm
* permanent magnetic plate 160 x 80 mm
* grinding wheel flange with grinding wheel
* grinding spindle can be run left or right
* grinding head l+r pivotable 90° each
* grinding spindle can travel forward and backward
* adjustable rough limiter on table
* adjustable fine limiter on table

according to the seller the machine was used in a teaching workshop occasionally.


* if the year of construction has a “tuep.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tueb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation.       %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 20% !!! MECH. HORIZ. SURFACE GRINDING MACHINE HAARMANN AE-UNIVERSAL MANUFACTURER: HAARMANN TYPE: AE-UNIVERSAL MACH.-NR.: 8030 YEAR OF CONSTRUCTION: ??? / 07.2018 TüP. COMM.-NR.: 3990200/009 STOCK-NR.: 1898 +++ SPECIAL PRICE: OLD 1.950,- € | NOW 1.560,- € +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) TECHNICAL DATA (ACCORDING TO MANUFACTURER) TABLE CLAMPING AREA: 620 X 110 MM MAX. GRINDING WHEEL LENGTH: 200 MM MAX. GRINDING WHEEL WIDTH: 170 MM MAX. DISTANCE BETWEEN TABLE AND CENTER OF SPINDLE: 350 MM LINEAR TABLE FEED LARGEST TABLE HUB: 250 MM TABLE CROSS-FEED LARGEST CROSS-FEED: 200 MM CROSS-FEED 1 TURN ON HAND-WHEEL: 5,08 MM 1 DIGIT ON HAND-WHEEL: 0,01 MM GRINDING SPINDLE MOVEMENT IN VERTICAL DIRECTION LARGEST DISTANCE BETWEEN TABLE AND GRINDING SPINDLE – MIDDLE: 350 MM VERTICAL FEED 1 TURN ON HAND-WHEEL: 5,08 MM 1 DIGIT ON HAND-WHEEL: 0,01 MM GRINDING WHEEL SPEED: 2.700 RPM LARGEST Ø: 140 MM LARGEST WIDTH: 15 MM BORE: 20/32 MM DRIVE POWER: 0,5 KW WEIGHT: CA. 100 KG STANDING AREA: W 0,70 X D 0,60 X H 1,60 M COLOR: BLUE / GREY-WHITE FEATURES * HAND-FINE ADJUSTMENT = 0,01 MM * PERMANENT MAGNETIC PLATE 160 X 80 MM * GRINDING WHEEL FLANGE WITH GRINDING WHEEL * GRINDING SPINDLE CAN BE RUN LEFT OR RIGHT * GRINDING HEAD L+R PIVOTABLE 90° EACH * GRINDING SPINDLE CAN TRAVEL FORWARD AND BACKWARD * ADJUSTABLE ROUGH LIMITER ON TABLE * ADJUSTABLE FINE LIMITER ON TABLE ACCORDING TO THE SELLER THE MACHINE WAS USED IN A TEACHING WORKSHOP OCCASIONALLY. * IF THE YEAR OF CONSTRUCTION HAS A “TUEP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TUEB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION.
Vendedor: ProHa Maschinen
Año de construcción: usado
Ubicación: Land-x-travel:1200 mm<br/>y-travel:1000 mm<br/>z-travel:1000 mm<br/>distance spindle nose and table:100-1100 mm<br/>distance spindle center to table:200-1200 mm<br/>table height over floor:1350 mm<br/>pallet table size:800x800 mm<br/>max. workpiece weight:1800x2 kg<br/>table - indexing:1° (optional 0,001°) <br/>max. workpiece height:1300x1250 mm<br/>spindle speeds:10000 1/min<br/>spindle drive:30/25 kw<br/>spindle speed steps:2 <br/>spindle nose:50 sk/bt<br/>rapid speed:50 m/min<br/>feeds:1-20000 mm/u<br/>tool taper:50 sk/bt<br/>tool changer:60 fach<br/>tool diameter:125 mm<br/>weight of tools max.:25 kg<br/>workpiece length:610 mm<br/>number of pallets:2 <br/>weight of the machine ca.:26000 kg<br/>automatic tool changer:60 fach<br/>cnc rotary table:1 °<br/>inner coolant:15 bar<br/>chip conveyor - auger: <br/>chip conveyor with chip bucket: <br/>: <br/>: <br/>ce-design: <br/>ce-certificate: <br/>servo motors:vom steuerungshersteller <br/>cnc controller:siemens/fanuc/heidenhain <br/>spindle oil cooler: <br/>fully enclosed: <br/>signal lamp: <br/>halogen lamp: <br/>mpg hand wheel: <br/>: <br/>atc:80/120 <br/>cts:35 oder 70 bar <br/>linear scales: <br/>cnc controls from:siemens/fanuc/heidenhain <br/>tool measuring system:von renishaw <br/>workpiece measurement system:von renishaw <br/>chip conveyor and trolley:mit magnetabscheider <br/>automatic pallet changer apc:6-fach und mehr auf anfrage <br/>cnc-rotary table:0,001 grad indexierung  <br/><br/>brand new horizontal machining center with:   contains:  1. control system fanuc oi-mf (10.4\ X-TRAVEL:1200 MM
Y-TRAVEL:1000 MM
Z-TRAVEL:1000 MM
DISTANCE SPINDLE NOSE AND TABLE:100-1100 MM
DISTANCE SPINDLE CENTER TO TABLE:200-1200 MM
TABLE HEIGHT OVER FLOOR:1350 MM
PALLET TABLE SIZE:800X800 MM
MAX. WORKPIECE WEIGHT:1800X2 KG
TABLE - INDEXING:1° (OPTIONAL 0,001°)
MAX. WORKPIECE HEIGHT:1300X1250 MM
SPINDLE SPEEDS:10000 1/MIN
SPINDLE DRIVE:30/25 KW
SPINDLE SPEED STEPS:2
SPINDLE NOSE:50 SK/BT
RAPID SPEED:50 M/MIN
FEEDS:1-20000 MM/U
TOOL TAPER:50 SK/BT
TOOL CHANGER:60 FACH
TOOL DIAMETER:125 MM
WEIGHT OF TOOLS MAX.:25 KG
WORKPIECE LENGTH:610 MM
NUMBER OF PALLETS:2
WEIGHT OF THE MACHINE CA.:26000 KG
AUTOMATIC TOOL CHANGER:60 FACH
CNC ROTARY TABLE:1 °
INNER COOLANT:15 BAR
CHIP CONVEYOR - AUGER:
CHIP CONVEYOR WITH CHIP BUCKET:
:
:
CE-DESIGN:
CE-CERTIFICATE:
SERVO MOTORS:VOM STEUERUNGSHERSTELLER
CNC CONTROLLER:SIEMENS/FANUC/HEIDENHAIN
SPINDLE OIL COOLER:
FULLY ENCLOSED:
SIGNAL LAMP:
HALOGEN LAMP:
MPG HAND WHEEL:
:
ATC:80/120
CTS:35 ODER 70 BAR
LINEAR SCALES:
CNC CONTROLS FROM:SIEMENS/FANUC/HEIDENHAIN
TOOL MEASURING SYSTEM:VON RENISHAW
WORKPIECE MEASUREMENT SYSTEM:VON RENISHAW
CHIP CONVEYOR AND TROLLEY:MIT MAGNETABSCHEIDER
AUTOMATIC PALLET CHANGER APC:6-FACH UND MEHR AUF ANFRAGE
CNC-ROTARY TABLE:0,001 GRAD INDEXIERUNG

BRAND NEW HORIZONTAL MACHINING CENTER WITH: CONTAINS: 1. CONTROL SYSTEM FANUC OI-MF (10.4\" SCREEN) 2. WORKING TABLE SIZE: 400 X 400 MM 3. MAX. WORKPIECE DIMENSION: DIA. 630 X H 800 MM 4. MAX. TABLE LOAD CAPACITY: 400 KGS X 2 PALLETS 5. SPINDLE CENTER TO TABLE SURFACE: 80 ~ 660 MM 6. TABLE CENTER TO SPINDLE NOSE: 70 ~ 650 MM 7. X/Y/Z STROKE 610/580/580 MM 8. X/Y/Z STROKE RAPID TRAVERSE: 60/60/60 M/MIN 9. SPINDLE MOTOR 22/25 KW (BUILT-IN TYPE) 10. SPINDLE SPEED 12000 RPM WITH SPINDLE COOLER 11. SPINDLE NOSE NT#40 (BT40) 12. ATC CAPACITY 60 TOOLS 13. COOLANT UNIT (REAR SIDE OF MACHINE) 14. COOLANT THRU. SPINDLE W/H HIGH PRESSURE PUMP (20BAR) AND FILTER SYSTEM (A TYPE) 15. FULL SPLASH COVER 16. ROTART TYPE APC UNIT X 2 WORKING PALLETS (400X400MM) 17. 4TH AXIS (B-AXIS) FUNCTION INDEX 1 DEGREE POSITIONING 18. ELECTRIC CABINET WITH HEAT EXCHANGER 19. TRANSFORMER (POWER SOURCE 380V) 20. RIGID TAPPING 21. MANUAL PULSE GENERATOR 22. CHIP CONVEYOR H=1100 MM WITH TROLLEY (INTEGRATED TYPE)ON THE REAR SIDE 23. AUGER TYPE CHIP SCREWS INSIDE OF MACHINE BED 24. NEW DESIGN MACHINE COVER & COLOR SCHEME 25. FANUC WARRANTY OPTIONS: 1. CE MARK 2. BALANCE OF 4TH AXIS (B-AXIS) INDEX 0.001 POSITIONING 3. COOLANT GUN WITH ON/OFF SWITCH 4. OIL SKIMMER (DISC TYPE) 5. MANUAL GUIDE I FUNCTION
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 1.800 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 20% !!!


mech. horiz. surface grinding machine haarmann hf2

manufacturer: haarmann
type: hf2
mach.-nr.: 1871
year of construction: ??? / 07.2018 tüp.
comm.-nr.: 3990300/009
stock-nr.: 1894


+++ special price: old 2.250,- € | now 1.800,- €
+++ all prices are shown without taxes (net price)

 
technical data
(according to manufacturer)

table clamping area: 360 x 160 mm
max. grinding wheel length: 320 mm
max. grinding wheel width: 210 mm
max. distance between table and center of spindle: 250 mm

linear table feed

largest table hub: 400 mm

table cross-feed

largest cross-feed: 250 mm

cross-feed

1 turn on hand-wheel: 4 mm
1 digit on hand-wheel: 0,02 mm

grinding spindle movement in vertical direction

largest distance between table and grinding spindle – middle: 250 mm

vertical feed

1 turn on hand-wheel: 4 mm
1 digit on hand-wheel: 0,02 mm

grinding wheel

speed: 2.800 rpm
largest Ø: 180 mm
largest width: 20 mm
bore: 20 mm

drive power: 0,5 kw
weight: ca. 420 kg
standing area: w 0,80 x d 1,00 x h 1,80 m
color: blue / grey-white


features

* hand-fine adjustment = 0,02 mm
* permanent magnetic plate 300 x 150 mm
* grinding wheel flange with grinding wheel
* measuring clock holder
* wet grinding attachment

according to the seller the machine was used in a teaching workshop occasionally.


* if the year of construction has a “tuep.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tueb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation.       %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 20% !!! MECH. HORIZ. SURFACE GRINDING MACHINE HAARMANN HF2 MANUFACTURER: HAARMANN TYPE: HF2 MACH.-NR.: 1871 YEAR OF CONSTRUCTION: ??? / 07.2018 TüP. COMM.-NR.: 3990300/009 STOCK-NR.: 1894 +++ SPECIAL PRICE: OLD 2.250,- € | NOW 1.800,- € +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) TECHNICAL DATA (ACCORDING TO MANUFACTURER) TABLE CLAMPING AREA: 360 X 160 MM MAX. GRINDING WHEEL LENGTH: 320 MM MAX. GRINDING WHEEL WIDTH: 210 MM MAX. DISTANCE BETWEEN TABLE AND CENTER OF SPINDLE: 250 MM LINEAR TABLE FEED LARGEST TABLE HUB: 400 MM TABLE CROSS-FEED LARGEST CROSS-FEED: 250 MM CROSS-FEED 1 TURN ON HAND-WHEEL: 4 MM 1 DIGIT ON HAND-WHEEL: 0,02 MM GRINDING SPINDLE MOVEMENT IN VERTICAL DIRECTION LARGEST DISTANCE BETWEEN TABLE AND GRINDING SPINDLE – MIDDLE: 250 MM VERTICAL FEED 1 TURN ON HAND-WHEEL: 4 MM 1 DIGIT ON HAND-WHEEL: 0,02 MM GRINDING WHEEL SPEED: 2.800 RPM LARGEST Ø: 180 MM LARGEST WIDTH: 20 MM BORE: 20 MM DRIVE POWER: 0,5 KW WEIGHT: CA. 420 KG STANDING AREA: W 0,80 X D 1,00 X H 1,80 M COLOR: BLUE / GREY-WHITE FEATURES * HAND-FINE ADJUSTMENT = 0,02 MM * PERMANENT MAGNETIC PLATE 300 X 150 MM * GRINDING WHEEL FLANGE WITH GRINDING WHEEL * MEASURING CLOCK HOLDER * WET GRINDING ATTACHMENT ACCORDING TO THE SELLER THE MACHINE WAS USED IN A TEACHING WORKSHOP OCCASIONALLY. * IF THE YEAR OF CONSTRUCTION HAS A “TUEP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TUEB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION.
Vendedor: ProHa Maschinen
Año de construcción: usado
Ubicación: Land-x-travel:710 mm<br/>y-travel:680 mm<br/>z-travel:680 mm<br/>distance spindle nose and table:70-750 mm<br/>distance spindle center to table:80-760 mm<br/>table height over floor:1150 mm<br/>pallet table size:500x500 mm<br/>max. workpiece weight:500x2 kg<br/>table - indexing:1° (optional 0,001°) <br/>spindle speeds:12000 1/min<br/>spindle drive:22/25 kw<br/>spindle speed steps:2 <br/>spindle nose:40 sk/bt<br/>spindle bearing diameter:75 mm<br/>rapid speed:60 m/min<br/>feeds:1-20000 mm/u<br/>tool taper:40 sk/bt<br/>tool changer:60 fach<br/>tool diameter:75 mm<br/>weight of tools max.:12 kg<br/>workpiece length:410 mm<br/>number of pallets:2 <br/>compressed air volume:400 l/min<br/>coolant tank:550 l<br/>hydraulic tank:30 l<br/>lubrication tank:2 l<br/>total power requirement:45 kva<br/>weight of the machine ca.:12200 kg<br/>automatic tool changer:60 fach<br/>cnc rotary table:1 °<br/>inner coolant:20 bar<br/>cnc controller:siemens/fanuc/heidenhain <br/>chip conveyor - auger: <br/>chip conveyor with chip bucket: <br/>: <br/>: <br/>ce-design: <br/>ce-certificate: <br/>servo motors:vom steuerungshersteller <br/>atc:80/120 <br/>cts:35 oder 70 bar <br/>linear scales: <br/>cnc controls from:siemens/fanuc/heidenhain <br/>tool measuring system:von renishaw <br/>workpiece measurement system:von renishaw <br/>chip conveyor and trolley:mit magnetabscheider <br/>automatic pallet changer apc:8-fach <br/>cnc-rotary table:0,001 grad indexierung  <br/><br/>brand new horizontal machining center with:   contains:  1. control system fanuc oi-mf (10.4\ X-TRAVEL:710 MM
Y-TRAVEL:680 MM
Z-TRAVEL:680 MM
DISTANCE SPINDLE NOSE AND TABLE:70-750 MM
DISTANCE SPINDLE CENTER TO TABLE:80-760 MM
TABLE HEIGHT OVER FLOOR:1150 MM
PALLET TABLE SIZE:500X500 MM
MAX. WORKPIECE WEIGHT:500X2 KG
TABLE - INDEXING:1° (OPTIONAL 0,001°)
SPINDLE SPEEDS:12000 1/MIN
SPINDLE DRIVE:22/25 KW
SPINDLE SPEED STEPS:2
SPINDLE NOSE:40 SK/BT
SPINDLE BEARING DIAMETER:75 MM
RAPID SPEED:60 M/MIN
FEEDS:1-20000 MM/U
TOOL TAPER:40 SK/BT
TOOL CHANGER:60 FACH
TOOL DIAMETER:75 MM
WEIGHT OF TOOLS MAX.:12 KG
WORKPIECE LENGTH:410 MM
NUMBER OF PALLETS:2
COMPRESSED AIR VOLUME:400 L/MIN
COOLANT TANK:550 L
HYDRAULIC TANK:30 L
LUBRICATION TANK:2 L
TOTAL POWER REQUIREMENT:45 KVA
WEIGHT OF THE MACHINE CA.:12200 KG
AUTOMATIC TOOL CHANGER:60 FACH
CNC ROTARY TABLE:1 °
INNER COOLANT:20 BAR
CNC CONTROLLER:SIEMENS/FANUC/HEIDENHAIN
CHIP CONVEYOR - AUGER:
CHIP CONVEYOR WITH CHIP BUCKET:
:
:
CE-DESIGN:
CE-CERTIFICATE:
SERVO MOTORS:VOM STEUERUNGSHERSTELLER
ATC:80/120
CTS:35 ODER 70 BAR
LINEAR SCALES:
CNC CONTROLS FROM:SIEMENS/FANUC/HEIDENHAIN
TOOL MEASURING SYSTEM:VON RENISHAW
WORKPIECE MEASUREMENT SYSTEM:VON RENISHAW
CHIP CONVEYOR AND TROLLEY:MIT MAGNETABSCHEIDER
AUTOMATIC PALLET CHANGER APC:8-FACH
CNC-ROTARY TABLE:0,001 GRAD INDEXIERUNG

BRAND NEW HORIZONTAL MACHINING CENTER WITH: CONTAINS: 1. CONTROL SYSTEM FANUC OI-MF (10.4\" SCREEN) 2. WORKING TABLE SIZE: 400 X 400 MM 3. MAX. WORKPIECE DIMENSION: DIA. 630 X H 800 MM 4. MAX. TABLE LOAD CAPACITY: 400 KGS X 2 PALLETS 5. SPINDLE CENTER TO TABLE SURFACE: 80 ~ 660 MM 6. TABLE CENTER TO SPINDLE NOSE: 70 ~ 650 MM 7. X/Y/Z STROKE 610/580/580 MM 8. X/Y/Z STROKE RAPID TRAVERSE: 60/60/60 M/MIN 9. SPINDLE MOTOR 22/25 KW (BUILT-IN TYPE) 10. SPINDLE SPEED 12000 RPM WITH SPINDLE COOLER 11. SPINDLE NOSE NT#40 (BT40) 12. ATC CAPACITY 60 TOOLS 13. COOLANT UNIT (REAR SIDE OF MACHINE) 14. COOLANT THRU. SPINDLE W/H HIGH PRESSURE PUMP (20BAR) AND FILTER SYSTEM (A TYPE) 15. FULL SPLASH COVER 16. ROTART TYPE APC UNIT X 2 WORKING PALLETS (400X400MM) 17. 4TH AXIS (B-AXIS) FUNCTION INDEX 1 DEGREE POSITIONING 18. ELECTRIC CABINET WITH HEAT EXCHANGER 19. TRANSFORMER (POWER SOURCE 380V) 20. RIGID TAPPING 21. MANUAL PULSE GENERATOR 22. CHIP CONVEYOR H=1100 MM WITH TROLLEY (INTEGRATED TYPE)ON THE REAR SIDE 23. AUGER TYPE CHIP SCREWS INSIDE OF MACHINE BED 24. NEW DESIGN MACHINE COVER & COLOR SCHEME 25. FANUC WARRANTY OPTIONS: 1. CE MARK 2. BALANCE OF 4TH AXIS (B-AXIS) INDEX 0.001 POSITIONING 3. COOLANT GUN WITH ON/OFF SWITCH 4. OIL SKIMMER (DISC TYPE) 5. MANUAL GUIDE I FUNCTION
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-empty bottle inspector heuft inline ebi with reflexx and spectrum units

the machine was installed in year 2007 and its currently in very good operational condition, it has been last serviced and can be demonstrated to customers. the capacity is 60 000 bph. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. it has complete heuft manuals in english

this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.

sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.

the ebi has optical heuft thread detection system which inspects the screw closure finish on a glass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.

this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.

technical data:
manufacturer: heuft gmbh, germany
year: 9/2007
type: heuft inline ebi with reflexx image processing
model: h8 bsxt b 72
capacity: 60 000 bph
reliability: 99.9 % detection complete heuft manuals in english. this unit can be sold to the market.
total operating hours 12750
total on duty hours 27500  EMPTY BOTTLE INSPECTOR HEUFT INLINE EBI WITH REFLEXX AND SPECTRUM UNITS THE MACHINE WAS INSTALLED IN YEAR 2007 AND ITS CURRENTLY IN VERY GOOD OPERATIONAL CONDITION, IT HAS BEEN LAST SERVICED AND CAN BE DEMONSTRATED TO CUSTOMERS. THE CAPACITY IS 60 000 BPH. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. IT HAS COMPLETE HEUFT MANUALS IN ENGLISH THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON A GLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 9/2007 TYPE: HEUFT INLINE EBI WITH REFLEXX IMAGE PROCESSING MODEL: H8 BSXT B 72 CAPACITY: 60 000 BPH RELIABILITY: 99.9 % DETECTION COMPLETE HEUFT MANUALS IN ENGLISH. THIS UNIT CAN BE SOLD TO THE MARKET. TOTAL OPERATING HOURS 12750 TOTAL ON DUTY HOURS 27500
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-faceplate diameter:4000 mm<br/>swing diameter:5000 mm<br/>turning height:2500 mm<br/>max. turning diameter:5000 mm<br/>table load:40 t<br/>table rotation speed:0,1-80 (2-stufig) u/min<br/>max. torque on the faceplate:108000 nm<br/>travel of ram (vertical):1800 mm<br/>travel of ram (horiz.):-2500~+2900 (aus tischmitte) mm<br/>ram head dimension:300x300 mm<br/>spindle speed:10-2500 (2-stufig) 1/min<br/>spindle taper:50 sk<br/>rapid power traverse in x-and z direction:10/10 m/min<br/>feed speeds:1-3000 mm/min<br/>cross rail travel :1680 mm<br/>tool changer:12-fach für rechten stößel (für drehwerkzeuge) <br/>tool changer:60-fach für linken stößel (für fräswerkzeuge) <br/>tool taper:sk50/bt50 <br/>machine height:s. anlage mm<br/>machine length:s. anlage mm<br/>machine width:s. anlage mm<br/>drive capacity - spindle motor:18,5/22 kw<br/>coolant pump drive:3 kw<br/>servo motor x-axis:9 kw<br/>servo motor z-axis:9 kw<br/>table drive:100 kw<br/>:300 kva<br/>weight of the machine ca.: kg<br/>positioning accuracy:0,01/500 mm<br/>repeating accuracy:+/-0,008 mm<br/>cnc controller:siemens/fanuc/fagor <br/>ce-design: <br/>: <br/>rams:2 stk.<br/>chip conveyor with chip bucket: <br/>c-axis: <br/>scales:v. heidenhain <br/>: <br/>coolant system: <br/>automatic tool changer:12+60 fach<br/>oil-coolant separator: <br/>machine semi-cover: <br/>4-jaw faceplate Ø:s. oben <br/>: <br/>signal lamp: <br/>heat exchanger for electr. cabinet: <br/>hydraulic unit: <br/>auto gear change system: <br/>levellig elements: <br/>gear box: <br/>autom. balancing system for z-axis: <br/>european electric: <br/>servo motors:siemens/fanuc/fagor <br/>machine tools: <br/>operator platform: <br/>tool holder: <br/>hydr. chuck: <br/>c-axis: <br/>cnc controls from:siemens/fanuc/fagor <br/>paper and magnetic filter: <br/>cts: <br/>autom. doors: <br/>automatic pallet changer apc: <br/>air condition for the cabinet: <br/>atc:320/60/90 fach<br/>higher column: <br/>tool measuring system: <br/>workpiece measurement system: <br/>hirth coupling system: <br/><br/>chip conveyor coolant tank oil/water separator machine cover (high guarding) heat exchanger for electrical cabinet auto lubrication for guide way 4 jaw manual chuck 1600mm hydraulic unit bt50 tool connection in ram metal frame and case in machine shipment packing(wooden packing with metal base) 3 colors warning light chamber light anti- dropping in z axis -- auto motor brake system options installed air conditioner for cabinet coolant through spindle  filter for coolant water  ce mark  transformer FACEPLATE DIAMETER:4000 MM
SWING DIAMETER:5000 MM
TURNING HEIGHT:2500 MM
MAX. TURNING DIAMETER:5000 MM
TABLE LOAD:40 T
TABLE ROTATION SPEED:0,1-80 (2-STUFIG) U/MIN
MAX. TORQUE ON THE FACEPLATE:108000 NM
TRAVEL OF RAM (VERTICAL):1800 MM
TRAVEL OF RAM (HORIZ.):-2500~+2900 (AUS TISCHMITTE) MM
RAM HEAD DIMENSION:300X300 MM
SPINDLE SPEED:10-2500 (2-STUFIG) 1/MIN
SPINDLE TAPER:50 SK
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:10/10 M/MIN
FEED SPEEDS:1-3000 MM/MIN
CROSS RAIL TRAVEL :1680 MM
TOOL CHANGER:12-FACH FüR RECHTEN STößEL (FüR DREHWERKZEUGE)
TOOL CHANGER:60-FACH FüR LINKEN STößEL (FüR FRäSWERKZEUGE)
TOOL TAPER:SK50/BT50
MACHINE HEIGHT:S. ANLAGE MM
MACHINE LENGTH:S. ANLAGE MM
MACHINE WIDTH:S. ANLAGE MM
DRIVE CAPACITY - SPINDLE MOTOR:18,5/22 KW
COOLANT PUMP DRIVE:3 KW
SERVO MOTOR X-AXIS:9 KW
SERVO MOTOR Z-AXIS:9 KW
TABLE DRIVE:100 KW
:300 KVA
WEIGHT OF THE MACHINE CA.: KG
POSITIONING ACCURACY:0,01/500 MM
REPEATING ACCURACY:+/-0,008 MM
CNC CONTROLLER:SIEMENS/FANUC/FAGOR
CE-DESIGN:
:
RAMS:2 STK.
CHIP CONVEYOR WITH CHIP BUCKET:
C-AXIS:
SCALES:V. HEIDENHAIN
:
COOLANT SYSTEM:
AUTOMATIC TOOL CHANGER:12+60 FACH
OIL-COOLANT SEPARATOR:
MACHINE SEMI-COVER:
4-JAW FACEPLATE Ø:S. OBEN
:
SIGNAL LAMP:
HEAT EXCHANGER FOR ELECTR. CABINET:
HYDRAULIC UNIT:
AUTO GEAR CHANGE SYSTEM:
LEVELLIG ELEMENTS:
GEAR BOX:
AUTOM. BALANCING SYSTEM FOR Z-AXIS:
EUROPEAN ELECTRIC:
SERVO MOTORS:SIEMENS/FANUC/FAGOR
MACHINE TOOLS:
OPERATOR PLATFORM:
TOOL HOLDER:
HYDR. CHUCK:
C-AXIS:
CNC CONTROLS FROM:SIEMENS/FANUC/FAGOR
PAPER AND MAGNETIC FILTER:
CTS:
AUTOM. DOORS:
AUTOMATIC PALLET CHANGER APC:
AIR CONDITION FOR THE CABINET:
ATC:320/60/90 FACH
HIGHER COLUMN:
TOOL MEASURING SYSTEM:
WORKPIECE MEASUREMENT SYSTEM:
HIRTH COUPLING SYSTEM:

CHIP CONVEYOR COOLANT TANK OIL/WATER SEPARATOR MACHINE COVER (HIGH GUARDING) HEAT EXCHANGER FOR ELECTRICAL CABINET AUTO LUBRICATION FOR GUIDE WAY 4 JAW MANUAL CHUCK 1600MM HYDRAULIC UNIT BT50 TOOL CONNECTION IN RAM METAL FRAME AND CASE IN MACHINE SHIPMENT PACKING(WOODEN PACKING WITH METAL BASE) 3 COLORS WARNING LIGHT CHAMBER LIGHT ANTI- DROPPING IN Z AXIS -- AUTO MOTOR BRAKE SYSTEM OPTIONS INSTALLED AIR CONDITIONER FOR CABINET COOLANT THROUGH SPINDLE FILTER FOR COOLANT WATER CE MARK TRANSFORMER
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 4.760 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 20% !!!


horiz. surface grinding machine aba ff 60/22

manufacturer: aba-werk
type: ff 60/22
mach.-nr.: 020670
year of construction: ??? / 07.2018 tüp.
comm.-nr.: 3990700/009
stock-nr.: 1896


+++ special price: old 5.950,- € | now 4.760,- €
+++ all prices are shown without taxes (net price)

 
technical data
(according to manufacturer)

table clamping area: 600 x 200 mm
max. grinding wheel length: 600 mm
max. grinding wheel width: 220 mm

linear table feed

largest table hub: 625 mm
speed infinitely adjustable: 2 – 20 m/min.

table cross-feed

largest cross-feed: 240 mm
automatic cross-feed of table per hub: 0 – 2 mm
cross-feed
1 turn on hand-wheel: 8 mm
1 digit on hand-wheel: 0,02 mm

grinding spindle movement in vertical direction

largest distance between table and grinding spindle – middle: 470 mm
vertical feed
1 turn on hand-wheel: 1 mm
1 digit on hand-wheel: 0,01 mm

grinding wheel

speed: 2800 rpm
largest Ø: 225 mm
largest width: 30 mm
bore: 51 mm

drive power: 2,4 kw
weight: ca. 1.200 kg
standing area: w 1,80 x d 1,40 x h 1,70 m
color: blue / grey-white

 
features

* fine adjustment knob across = 0,02 mm
* fine adjustment knob vertical = 0,01 mm
* grinding wheel honing device with diamond
* grinding wheel flange with grinding wheel
* electr. magnetic clamping plate ca. 550 x 200 mm
* wet grinding capability
* dust vacuum device
* machine light
* 4 shock-absorbing standing feet


* if the year of construction has a “tuep.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tueb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation.       %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 20% !!! HORIZ. SURFACE GRINDING MACHINE ABA FF 60/22 MANUFACTURER: ABA-WERK TYPE: FF 60/22 MACH.-NR.: 020670 YEAR OF CONSTRUCTION: ??? / 07.2018 TüP. COMM.-NR.: 3990700/009 STOCK-NR.: 1896 +++ SPECIAL PRICE: OLD 5.950,- € | NOW 4.760,- € +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) TECHNICAL DATA (ACCORDING TO MANUFACTURER) TABLE CLAMPING AREA: 600 X 200 MM MAX. GRINDING WHEEL LENGTH: 600 MM MAX. GRINDING WHEEL WIDTH: 220 MM LINEAR TABLE FEED LARGEST TABLE HUB: 625 MM SPEED INFINITELY ADJUSTABLE: 2 – 20 M/MIN. TABLE CROSS-FEED LARGEST CROSS-FEED: 240 MM AUTOMATIC CROSS-FEED OF TABLE PER HUB: 0 – 2 MM CROSS-FEED 1 TURN ON HAND-WHEEL: 8 MM 1 DIGIT ON HAND-WHEEL: 0,02 MM GRINDING SPINDLE MOVEMENT IN VERTICAL DIRECTION LARGEST DISTANCE BETWEEN TABLE AND GRINDING SPINDLE – MIDDLE: 470 MM VERTICAL FEED 1 TURN ON HAND-WHEEL: 1 MM 1 DIGIT ON HAND-WHEEL: 0,01 MM GRINDING WHEEL SPEED: 2800 RPM LARGEST Ø: 225 MM LARGEST WIDTH: 30 MM BORE: 51 MM DRIVE POWER: 2,4 KW WEIGHT: CA. 1.200 KG STANDING AREA: W 1,80 X D 1,40 X H 1,70 M COLOR: BLUE / GREY-WHITE FEATURES * FINE ADJUSTMENT KNOB ACROSS = 0,02 MM * FINE ADJUSTMENT KNOB VERTICAL = 0,01 MM * GRINDING WHEEL HONING DEVICE WITH DIAMOND * GRINDING WHEEL FLANGE WITH GRINDING WHEEL * ELECTR. MAGNETIC CLAMPING PLATE CA. 550 X 200 MM * WET GRINDING CAPABILITY * DUST VACUUM DEVICE * MACHINE LIGHT * 4 SHOCK-ABSORBING STANDING FEET * IF THE YEAR OF CONSTRUCTION HAS A “TUEP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TUEB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION.
Vendedor: ProHa Maschinen
Año de construcción: usado
Ubicación: Land-faceplate diameter:2000 mm<br/>swing diameter:2500 mm<br/>turning height:1700 mm<br/>max. turning diameter:2300 mm<br/>weight of the machine ca.:52 t<br/><br/>chip conveyor coolant tank oil/water separator machine cover (high guarding) heat exchanger for electrical cabinet auto lubrication for guide way 4 jaw manual chuck 1600mm hydraulic unit bt50 tool connection in ram metal frame and case in machine shipment packing(wooden packing with metal base) 3 colors warning light chamber light anti- dropping in z axis -- auto motor brake system options installed air conditioner for cabinet coolant through spindle  filter for coolant water  ce mark  transformer FACEPLATE DIAMETER:2000 MM
SWING DIAMETER:2500 MM
TURNING HEIGHT:1700 MM
MAX. TURNING DIAMETER:2300 MM
WEIGHT OF THE MACHINE CA.:52 T

CHIP CONVEYOR COOLANT TANK OIL/WATER SEPARATOR MACHINE COVER (HIGH GUARDING) HEAT EXCHANGER FOR ELECTRICAL CABINET AUTO LUBRICATION FOR GUIDE WAY 4 JAW MANUAL CHUCK 1600MM HYDRAULIC UNIT BT50 TOOL CONNECTION IN RAM METAL FRAME AND CASE IN MACHINE SHIPMENT PACKING(WOODEN PACKING WITH METAL BASE) 3 COLORS WARNING LIGHT CHAMBER LIGHT ANTI- DROPPING IN Z AXIS -- AUTO MOTOR BRAKE SYSTEM OPTIONS INSTALLED AIR CONDITIONER FOR CABINET COOLANT THROUGH SPINDLE FILTER FOR COOLANT WATER CE MARK TRANSFORMER
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 6.560 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 20% !!!


universal cylindrical grinding machine mso fm 130/350 with digital setup in x = 0,001 mm

manufacturer: mso
type: fm 130/350
mach.-nr.: m 25728
year of construction: ??? / 2018 tüp.
comm.-nr.: 3990855/009
stock-nr.: 1889


+++ special price: old 8.250,- € | now 6.560,- €
+++ all prices are shown without taxes (net price)

 
the machine can be used for:

* external grinding
* surface grinding
* taper grinding
* edge grinding
* phase grinding
* plunge grinding

 
technical data
(according to manufacturer)

centre height: 130 mm
swing-Ø: 260 mm
grinding length: 350 mm

grinding wheel

diameter: 300 mm
bore-Ø: 127 mm
largest width of grinding wheel for plunge grinding: 40 mm
largest total width of a grinding wheel set: 80 mm
largest sum of single widths: 40 mm
grinding wheel speed: 1.650 / 2.150 rpm = 30 m/s

grinding head

largest grinding head hub: 209 mm
largest fine hub by hand wheel: 90 mm
largest rough hub by hand wheel: 165 mm
additional hub: 142 mm
autom. interval feed: 0,005 – 0,020 mm
feed by one revolution of hand wheel: 1,0 / 2,0 mm
feed by one hand wheel graduation mark: 0,005 mm

 

headstock spindle

6 work-piece speeds, adjustable: 40 – 305 rpm
rotatability of headstock spindle against the grinding wheel: 90°
spindle cone or inner taper of headstock spindle: mk 4

tailstock

inner cone of quill: mk 3
quill travel: 30 mm

table

largest table incline: 10°
largest cone angle: 20°
table speed: 0,2 – 1,0 m/min
rough travel by hand wheel: 1 revolution 25 mm, 1 graduation mark 0,25 mm
fine travel by hand wheel: 1 revolution 2,5 mm, 1 graduation mark 0,025 mm

total connected load: ca. 4 kw
weight: ca. 1.800 kg
standing area: w 1,60 x d 1,30 x h 1,40 m
color: blue / grey-white / red

 
features

* digital display in x, sino sds3, almost new
* manual or automatic operation
* self-feeding up to 0-limit
* grinding wheel fine adjustment 0,001 / 0,002
* automatic feed works as piercing feed, without feed, table-dependant feed
* only right / left and right / only left
* upper table for tamper grinding adjustable
* bedway is lubricated by re-oil
* tailstock can be activated by mechanical lever
* headstock spindle pivotable up to 90°
* grinding head pivotable up to 360°, in 2 layers
* grinding head two speeds
* free-standing liquid cooling system, mobile
* splash guards
* 2 pieces grinding wheel flanges
* adjustable dressing device for grinding wheel, at tailstock with diamond
* open lunette, adjustable
* three-jaw chuck 125 mm Ø, with inner and outer clamps, with flange and spindle holder (unused)
* face plate 160 mm Ø (unused)
* collet chuck er40 with set of collets 32 pieces, Ø 4 – 30 mm (unused)
* spindle holder sleeve mk4 / mk3
* clamping tube for spindle tools
* splash guards
* centre punch pricks, in various designs
* wet grinding device with magnetic filter
* operating manual with electrical circuits


* if the year of construction has a “tuep.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tueb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation. 


all sales are subject to our terms and conditions. all information and technical data on this website is non-binding, errors excepted.

all prices will have an additional 19 % tax added (german “mehrwertsteuer/mwst.”) on your invoice. buyers from foreign countries will pay the net price without an additional tax, if they provide us with their ident.-nr.

all prices are ex-works, without packaging or delivery. the machine will be loaded on a truck free of charge, provided you pick it up at our warehouse.
the buyer bears the cost of packaging and delivery. packaging is done only after the buyer has signed a sales contract.

attention – important!!!
if you want us to facilitate the shipping with an external contractor, this will be done on behalf of and paid for by the buyer. we are not responsible for transport or unloading damage. by buying from us, you automatically agree to these terms and conditions.

also, consider taking a look at our other offers in stock.           %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 20% !!! UNIVERSAL CYLINDRICAL GRINDING MACHINE MSO FM 130/350 WITH DIGITAL SETUP IN X = 0,001 MM MANUFACTURER: MSO TYPE: FM 130/350 MACH.-NR.: M 25728 YEAR OF CONSTRUCTION: ??? / 2018 TüP. COMM.-NR.: 3990855/009 STOCK-NR.: 1889 +++ SPECIAL PRICE: OLD 8.250,- € | NOW 6.560,- € +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) THE MACHINE CAN BE USED FOR: * EXTERNAL GRINDING * SURFACE GRINDING * TAPER GRINDING * EDGE GRINDING * PHASE GRINDING * PLUNGE GRINDING TECHNICAL DATA (ACCORDING TO MANUFACTURER) CENTRE HEIGHT: 130 MM SWING-Ø: 260 MM GRINDING LENGTH: 350 MM GRINDING WHEEL DIAMETER: 300 MM BORE-Ø: 127 MM LARGEST WIDTH OF GRINDING WHEEL FOR PLUNGE GRINDING: 40 MM LARGEST TOTAL WIDTH OF A GRINDING WHEEL SET: 80 MM LARGEST SUM OF SINGLE WIDTHS: 40 MM GRINDING WHEEL SPEED: 1.650 / 2.150 RPM = 30 M/S GRINDING HEAD LARGEST GRINDING HEAD HUB: 209 MM LARGEST FINE HUB BY HAND WHEEL: 90 MM LARGEST ROUGH HUB BY HAND WHEEL: 165 MM ADDITIONAL HUB: 142 MM AUTOM. INTERVAL FEED: 0,005 – 0,020 MM FEED BY ONE REVOLUTION OF HAND WHEEL: 1,0 / 2,0 MM FEED BY ONE HAND WHEEL GRADUATION MARK: 0,005 MM HEADSTOCK SPINDLE 6 WORK-PIECE SPEEDS, ADJUSTABLE: 40 – 305 RPM ROTATABILITY OF HEADSTOCK SPINDLE AGAINST THE GRINDING WHEEL: 90° SPINDLE CONE OR INNER TAPER OF HEADSTOCK SPINDLE: MK 4 TAILSTOCK INNER CONE OF QUILL: MK 3 QUILL TRAVEL: 30 MM TABLE LARGEST TABLE INCLINE: 10° LARGEST CONE ANGLE: 20° TABLE SPEED: 0,2 – 1,0 M/MIN ROUGH TRAVEL BY HAND WHEEL: 1 REVOLUTION 25 MM, 1 GRADUATION MARK 0,25 MM FINE TRAVEL BY HAND WHEEL: 1 REVOLUTION 2,5 MM, 1 GRADUATION MARK 0,025 MM TOTAL CONNECTED LOAD: CA. 4 KW WEIGHT: CA. 1.800 KG STANDING AREA: W 1,60 X D 1,30 X H 1,40 M COLOR: BLUE / GREY-WHITE / RED FEATURES * DIGITAL DISPLAY IN X, SINO SDS3, ALMOST NEW * MANUAL OR AUTOMATIC OPERATION * SELF-FEEDING UP TO 0-LIMIT * GRINDING WHEEL FINE ADJUSTMENT 0,001 / 0,002 * AUTOMATIC FEED WORKS AS PIERCING FEED, WITHOUT FEED, TABLE-DEPENDANT FEED * ONLY RIGHT / LEFT AND RIGHT / ONLY LEFT * UPPER TABLE FOR TAMPER GRINDING ADJUSTABLE * BEDWAY IS LUBRICATED BY RE-OIL * TAILSTOCK CAN BE ACTIVATED BY MECHANICAL LEVER * HEADSTOCK SPINDLE PIVOTABLE UP TO 90° * GRINDING HEAD PIVOTABLE UP TO 360°, IN 2 LAYERS * GRINDING HEAD TWO SPEEDS * FREE-STANDING LIQUID COOLING SYSTEM, MOBILE * SPLASH GUARDS * 2 PIECES GRINDING WHEEL FLANGES * ADJUSTABLE DRESSING DEVICE FOR GRINDING WHEEL, AT TAILSTOCK WITH DIAMOND * OPEN LUNETTE, ADJUSTABLE * THREE-JAW CHUCK 125 MM Ø, WITH INNER AND OUTER CLAMPS, WITH FLANGE AND SPINDLE HOLDER (UNUSED) * FACE PLATE 160 MM Ø (UNUSED) * COLLET CHUCK ER40 WITH SET OF COLLETS 32 PIECES, Ø 4 – 30 MM (UNUSED) * SPINDLE HOLDER SLEEVE MK4 / MK3 * CLAMPING TUBE FOR SPINDLE TOOLS * SPLASH GUARDS * CENTRE PUNCH PRICKS, IN VARIOUS DESIGNS * WET GRINDING DEVICE WITH MAGNETIC FILTER * OPERATING MANUAL WITH ELECTRICAL CIRCUITS * IF THE YEAR OF CONSTRUCTION HAS A “TUEP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TUEB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION. ALL SALES ARE SUBJECT TO OUR TERMS AND CONDITIONS. ALL INFORMATION AND TECHNICAL DATA ON THIS WEBSITE IS NON-BINDING, ERRORS EXCEPTED. ALL PRICES WILL HAVE AN ADDITIONAL 19 % TAX ADDED (GERMAN “MEHRWERTSTEUER/MWST.”) ON YOUR INVOICE. BUYERS FROM FOREIGN COUNTRIES WILL PAY THE NET PRICE WITHOUT AN ADDITIONAL TAX, IF THEY PROVIDE US WITH THEIR IDENT.-NR. ALL PRICES ARE EX-WORKS, WITHOUT PACKAGING OR DELIVERY. THE MACHINE WILL BE LOADED ON A TRUCK FREE OF CHARGE, PROVIDED YOU PICK IT UP AT OUR WAREHOUSE. THE BUYER BEARS THE COST OF PACKAGING AND DELIVERY. PACKAGING IS DONE ONLY AFTER THE BUYER HAS SIGNED A SALES CONTRACT. ATTENTION – IMPORTANT!!! IF YOU WANT US TO FACILITATE THE SHIPPING WITH AN EXTERNAL CONTRACTOR, THIS WILL BE DONE ON BEHALF OF AND PAID FOR BY THE BUYER. WE ARE NOT RESPONSIBLE FOR TRANSPORT OR UNLOADING DAMAGE. BY BUYING FROM US, YOU AUTOMATICALLY AGREE TO THESE TERMS AND CONDITIONS. ALSO, CONSIDER TAKING A LOOK AT OUR OTHER OFFERS IN STOCK.
Vendedor: ProHa Maschinen
Año de construcción: usado
Ubicación: Land-turning diameter:1250 mm<br/>swing diameter:1100 mm<br/>turning height:1000 mm<br/>total power requirement:37/45 kw<br/>weight of the machine ca.:18 t<br/>dimensions of the machine ca.:4500x2520x4605 mm<br/><br/>standard accessories:  chips conveyor & coolant tank oil/water separator machine cover (high guarding) heat exchanger for electrical cabinet auto lubrication in guide way 4 jaw manual chuck 1000mm hydraulic unit bt50 tool connection in ram metal frame and case in machine shipment packing(wooden packing with metal base) 3 colors warning tower light chamber light anti- dropping in z axis -- auto motor brake system  installed options:  air conditioner for electrical box coolant through spindle filter of coolant water ce mark transformer TURNING DIAMETER:1250 MM
SWING DIAMETER:1100 MM
TURNING HEIGHT:1000 MM
TOTAL POWER REQUIREMENT:37/45 KW
WEIGHT OF THE MACHINE CA.:18 T
DIMENSIONS OF THE MACHINE CA.:4500X2520X4605 MM

STANDARD ACCESSORIES: CHIPS CONVEYOR & COOLANT TANK OIL/WATER SEPARATOR MACHINE COVER (HIGH GUARDING) HEAT EXCHANGER FOR ELECTRICAL CABINET AUTO LUBRICATION IN GUIDE WAY 4 JAW MANUAL CHUCK 1000MM HYDRAULIC UNIT BT50 TOOL CONNECTION IN RAM METAL FRAME AND CASE IN MACHINE SHIPMENT PACKING(WOODEN PACKING WITH METAL BASE) 3 COLORS WARNING TOWER LIGHT CHAMBER LIGHT ANTI- DROPPING IN Z AXIS -- AUTO MOTOR BRAKE SYSTEM INSTALLED OPTIONS: AIR CONDITIONER FOR ELECTRICAL BOX COOLANT THROUGH SPINDLE FILTER OF COOLANT WATER CE MARK TRANSFORMER
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 35.000 €
Ubicación: Land-triomax cnc machine is practically like new. the machine of the highest grade for the production of a wide assortment of pastries, cakes and other products. the unique feature of the machine is a three hoppers equipped with special spiral rolls of stainless steel, making triomac cnc can run on almost any test:<br>o shortbread<br>o brewing<br>o gingerbread<br>o biscuit<br>o muffins - muffins with a filling and fruit pieces<br>o eclairs<br>o marshmallows<br>types of products: one color with filling and / or decoration, two-colored with filling or decoration, with the help of cutting string, sponge cakes, peas and strips.<br><br>- two heads<br>- industrial drivers ensures fast and exact positioning<br>- table with automatic sheet feeding (13 trays, automatic indeed of trays)<br>- hermetical manufactured heads are able to work with thick dough and dough for shortbread cookies<br>- working width of heads 600 mm (tray 600 x 400 mm)<br>-  usage of different speed for trays possible (marks motion and extrusion speed), which enhances the productivity<br>- adjustable speed of elevation and lowering of a table<br>- adjustable height of lowering of the table (can be different for each type of a product, possibility of putting the dough in high (10 cm) moulds, and, by using other recipe to lower the table for the cake heigh, e.g. 1 cm. this land to increase in productivity)<br>- possibility to produce layered cake with several stops<br>- smooth adjustment of dough extracting rolls <br>- plc controllers with memory <br>- control panels on the machine<br><br>in triomax cnc began to use digital servo drives. due to this, triomax cnc high-precision, high-performance machine with simple operation and very reliable.; like new TRIOMAX CNC MACHINE IS PRACTICALLY LIKE NEW. THE MACHINE OF THE HIGHEST GRADE FOR THE PRODUCTION OF A WIDE ASSORTMENT OF PASTRIES, CAKES AND OTHER PRODUCTS. THE UNIQUE FEATURE OF THE MACHINE IS A THREE HOPPERS EQUIPPED WITH SPECIAL SPIRAL ROLLS OF STAINLESS STEEL, MAKING TRIOMAC CNC CAN RUN ON ALMOST ANY TEST:
O SHORTBREAD
O BREWING
O GINGERBREAD
O BISCUIT
O MUFFINS - MUFFINS WITH A FILLING AND FRUIT PIECES
O ECLAIRS
O MARSHMALLOWS
TYPES OF PRODUCTS: ONE COLOR WITH FILLING AND / OR DECORATION, TWO-COLORED WITH FILLING OR DECORATION, WITH THE HELP OF CUTTING STRING, SPONGE CAKES, PEAS AND STRIPS.

- TWO HEADS
- INDUSTRIAL DRIVERS ENSURES FAST AND EXACT POSITIONING
- TABLE WITH AUTOMATIC SHEET FEEDING (13 TRAYS, AUTOMATIC INDEED OF TRAYS)
- HERMETICAL MANUFACTURED HEADS ARE ABLE TO WORK WITH THICK DOUGH AND DOUGH FOR SHORTBREAD COOKIES
- WORKING WIDTH OF HEADS 600 MM (TRAY 600 X 400 MM)
-  USAGE OF DIFFERENT SPEED FOR TRAYS POSSIBLE (MARKS MOTION AND EXTRUSION SPEED), WHICH ENHANCES THE PRODUCTIVITY
- ADJUSTABLE SPEED OF ELEVATION AND LOWERING OF A TABLE
- ADJUSTABLE HEIGHT OF LOWERING OF THE TABLE (CAN BE DIFFERENT FOR EACH TYPE OF A PRODUCT, POSSIBILITY OF PUTTING THE DOUGH IN HIGH (10 CM) MOULDS, AND, BY USING OTHER RECIPE TO LOWER THE TABLE FOR THE CAKE HEIGH, E.G. 1 CM. THIS LAND TO INCREASE IN PRODUCTIVITY)
- POSSIBILITY TO PRODUCE LAYERED CAKE WITH SEVERAL STOPS
- SMOOTH ADJUSTMENT OF DOUGH EXTRACTING ROLLS 
- PLC CONTROLLERS WITH MEMORY 
- CONTROL PANELS ON THE MACHINE

IN TRIOMAX CNC BEGAN TO USE DIGITAL SERVO DRIVES. DUE TO THIS, TRIOMAX CNC HIGH-PRECISION, HIGH-PERFORMANCE MACHINE WITH SIMPLE OPERATION AND VERY RELIABLE.; LIKE NEW
Vendedor: Middle East-Trading
Año de construcción: usado
Ubicación: Land-faceplate diameter:2500 mm<br/>swing diameter:3000 mm<br/>turning height:1700 mm<br/>max. turning diameter:2800 mm<br/>weight of the machine ca.:53 t<br/>c-axis: <br/>chip conveyor: <br/>automatic tool changer:16 pos <br/>cnc control fanuc 0i td: <br/><br/>chip conveyor coolant tank oil/water separator machine cover (high guarding) heat exchanger for electrical cabinet auto lubrication for guide way 4 jaw manual chuck 1600mm hydraulic unit bt50 tool connection in ram metal frame and case in machine shipment packing(wooden packing with metal base) 3 colors warning light chamber light anti- dropping in z axis -- auto motor brake system options installed air conditioner for cabinet coolant through spindle  filter for coolant water  ce mark  transformer FACEPLATE DIAMETER:2500 MM
SWING DIAMETER:3000 MM
TURNING HEIGHT:1700 MM
MAX. TURNING DIAMETER:2800 MM
WEIGHT OF THE MACHINE CA.:53 T
C-AXIS:
CHIP CONVEYOR:
AUTOMATIC TOOL CHANGER:16 POS
CNC CONTROL FANUC 0I TD:

CHIP CONVEYOR COOLANT TANK OIL/WATER SEPARATOR MACHINE COVER (HIGH GUARDING) HEAT EXCHANGER FOR ELECTRICAL CABINET AUTO LUBRICATION FOR GUIDE WAY 4 JAW MANUAL CHUCK 1600MM HYDRAULIC UNIT BT50 TOOL CONNECTION IN RAM METAL FRAME AND CASE IN MACHINE SHIPMENT PACKING(WOODEN PACKING WITH METAL BASE) 3 COLORS WARNING LIGHT CHAMBER LIGHT ANTI- DROPPING IN Z AXIS -- AUTO MOTOR BRAKE SYSTEM OPTIONS INSTALLED AIR CONDITIONER FOR CABINET COOLANT THROUGH SPINDLE FILTER FOR COOLANT WATER CE MARK TRANSFORMER
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land--posters and signs at breathtaking speed
-8 colours pigment ink for a dynamic color gamut
-integrated color calibration and automatic deskew
-borderless printing
-reproduction quality of 2,400 x 1,200 dpi.
-double print head with 8-color lucia pigment ink system
the ipf6000s is an incredibly fast a1 large format printer with 8 color pigment ink,
which was designed for the poster and directions market. 
 -POSTERS AND SIGNS AT BREATHTAKING SPEED -8 COLOURS PIGMENT INK FOR A DYNAMIC COLOR GAMUT -INTEGRATED COLOR CALIBRATION AND AUTOMATIC DESKEW -BORDERLESS PRINTING -REPRODUCTION QUALITY OF 2,400 X 1,200 DPI. -DOUBLE PRINT HEAD WITH 8-COLOR LUCIA PIGMENT INK SYSTEM THE IPF6000S IS AN INCREDIBLY FAST A1 LARGE FORMAT PRINTER WITH 8 COLOR PIGMENT INK, WHICH WAS DESIGNED FOR THE POSTER AND DIRECTIONS MARKET.
Vendedor: Druck & Technik
Año de construcción: usado
Ubicación: Land-:ys-vl-1000 | ys-vl-1200 | ys-vl-1600 | ys-vl-2000 <br/>faceplate diameter:1000|1250|1600|2000 mm<br/>swing diameter:1350|1600|2000|2500 mm<br/>turning height:1070|1350|1350|1700 mm<br/>max. turning diameter:1150|1350|1800|2300 mm<br/>table load:4|5|8|10 t<br/>table rotation speed:2 - 600 | 2 - 300 | 2 - 250 | 2 - 200  u/min<br/>max. torque on the faceplate:10000|12500|18500|54000  nm<br/>travel of ram (vertical):800 | 900 | 900 | 1000  mm<br/>travel of ram (horiz.):1350 | 1475 | 1650 | 2275  mm<br/>ram head dimension:230 x 230|250 x 250|250 x 250|280 x 280 mm<br/>rapid power traverse in x-and z direction:10/12|10/12|10/12|10/10 m/min<br/>feeds:0,1 - 50 mm/u<br/>feed speeds:0 - 1260 mm/min<br/>tool changer:12 (c-achse mit 16) <br/>tool taper: <br/>drive capacity - spindle motor:37/45| 37/45 (60/75 opt.)| 37/45 (60/75 opt.)| 37/45 (60/75 opt.) kw<br/>machine height: 5330 |5500 |5500|6600 mm<br/>machine length:4600 |4700 |5050| 4950 mm<br/>machine width:5500 |5800 |6300|7320 mm<br/>weight of the machine ca.:24000 | 32000 |35000 |  51000 kg<br/>repeating accuracy:0,005 mm<br/>hydraulic motor:3,75 kw<br/>servo motor x-axis:7 kw<br/>servo motor z-axis:7 kw<br/>coolant pump drive:1,5 / 1,1 kw<br/>:75 | 80 | 80 | 140  kva<br/>cnc controller:siemens/fanuc/fagor <br/>ce-design: <br/>: <br/>levellig elements: <br/>chip conveyor with chip bucket: <br/>: <br/>coolant system: <br/>coolant system:700 liter<br/>automatic tool changer:16-fach <br/>oil-coolant separator: <br/>machine semi-cover: <br/>4-jaw faceplate Ø:s. oben <br/>: <br/>signal lamp: <br/>heat exchanger for electr. cabinet: <br/>hydraulic unit: <br/>auto gear change system: <br/>gear box: <br/>autom. balancing system for z-axis: <br/>machine tools: <br/>linear scales: <br/>hydr. chuck: <br/>c-axis: <br/>cnc controls from:siemens/fanuc/fagor <br/>paper and magnetic filter: <br/>cts: <br/>autom. doors: <br/>automatic pallet changer apc: <br/>air condition for the cabinet: <br/>atc:320/60/90 fach<br/>higher column: <br/>tool measuring system: <br/>workpiece measurement system: <br/>hirth coupling system: <br/><br/>chip conveyor coolant tank oil/water separator machine cover (high guarding) heat exchanger for electrical cabinet auto lubrication for guide way 4 jaw manual chuck 1600mm hydraulic unit bt50 tool connection in ram metal frame and case in machine shipment packing(wooden packing with metal base) 3 colors warning light chamber light anti- dropping in z axis -- auto motor brake system options installed air conditioner for cabinet coolant through spindle  filter for coolant water  ce mark  transformer :YS-VL-1000 | YS-VL-1200 | YS-VL-1600 | YS-VL-2000
FACEPLATE DIAMETER:1000|1250|1600|2000 MM
SWING DIAMETER:1350|1600|2000|2500 MM
TURNING HEIGHT:1070|1350|1350|1700 MM
MAX. TURNING DIAMETER:1150|1350|1800|2300 MM
TABLE LOAD:4|5|8|10 T
TABLE ROTATION SPEED:2 - 600 | 2 - 300 | 2 - 250 | 2 - 200 U/MIN
MAX. TORQUE ON THE FACEPLATE:10000|12500|18500|54000 NM
TRAVEL OF RAM (VERTICAL):800 | 900 | 900 | 1000 MM
TRAVEL OF RAM (HORIZ.):1350 | 1475 | 1650 | 2275 MM
RAM HEAD DIMENSION:230 X 230|250 X 250|250 X 250|280 X 280 MM
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:10/12|10/12|10/12|10/10 M/MIN
FEEDS:0,1 - 50 MM/U
FEED SPEEDS:0 - 1260 MM/MIN
TOOL CHANGER:12 (C-ACHSE MIT 16)
TOOL TAPER:
DRIVE CAPACITY - SPINDLE MOTOR:37/45| 37/45 (60/75 OPT.)| 37/45 (60/75 OPT.)| 37/45 (60/75 OPT.) KW
MACHINE HEIGHT: 5330 |5500 |5500|6600 MM
MACHINE LENGTH:4600 |4700 |5050| 4950 MM
MACHINE WIDTH:5500 |5800 |6300|7320 MM
WEIGHT OF THE MACHINE CA.:24000 | 32000 |35000 | 51000 KG
REPEATING ACCURACY:0,005 MM
HYDRAULIC MOTOR:3,75 KW
SERVO MOTOR X-AXIS:7 KW
SERVO MOTOR Z-AXIS:7 KW
COOLANT PUMP DRIVE:1,5 / 1,1 KW
:75 | 80 | 80 | 140 KVA
CNC CONTROLLER:SIEMENS/FANUC/FAGOR
CE-DESIGN:
:
LEVELLIG ELEMENTS:
CHIP CONVEYOR WITH CHIP BUCKET:
:
COOLANT SYSTEM:
COOLANT SYSTEM:700 LITER
AUTOMATIC TOOL CHANGER:16-FACH
OIL-COOLANT SEPARATOR:
MACHINE SEMI-COVER:
4-JAW FACEPLATE Ø:S. OBEN
:
SIGNAL LAMP:
HEAT EXCHANGER FOR ELECTR. CABINET:
HYDRAULIC UNIT:
AUTO GEAR CHANGE SYSTEM:
GEAR BOX:
AUTOM. BALANCING SYSTEM FOR Z-AXIS:
MACHINE TOOLS:
LINEAR SCALES:
HYDR. CHUCK:
C-AXIS:
CNC CONTROLS FROM:SIEMENS/FANUC/FAGOR
PAPER AND MAGNETIC FILTER:
CTS:
AUTOM. DOORS:
AUTOMATIC PALLET CHANGER APC:
AIR CONDITION FOR THE CABINET:
ATC:320/60/90 FACH
HIGHER COLUMN:
TOOL MEASURING SYSTEM:
WORKPIECE MEASUREMENT SYSTEM:
HIRTH COUPLING SYSTEM:

CHIP CONVEYOR COOLANT TANK OIL/WATER SEPARATOR MACHINE COVER (HIGH GUARDING) HEAT EXCHANGER FOR ELECTRICAL CABINET AUTO LUBRICATION FOR GUIDE WAY 4 JAW MANUAL CHUCK 1600MM HYDRAULIC UNIT BT50 TOOL CONNECTION IN RAM METAL FRAME AND CASE IN MACHINE SHIPMENT PACKING(WOODEN PACKING WITH METAL BASE) 3 COLORS WARNING LIGHT CHAMBER LIGHT ANTI- DROPPING IN Z AXIS -- AUTO MOTOR BRAKE SYSTEM OPTIONS INSTALLED AIR CONDITIONER FOR CABINET COOLANT THROUGH SPINDLE FILTER FOR COOLANT WATER CE MARK TRANSFORMER
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 7.120 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 20% !!!


hydr. universal cylindrical grinding machine wmw su 240×800

manufacturer: wmw su 240×800
build type: reinecker
type: su 240×800
mach.-nr.: 02910
year of construction: ??? / 2018 tüp.
comm.-nr.: 3990699/009
stock-nr.: 1865


+++ special price: old 8.900,- € | now 7.120,- € 
+++ all prices are shown without taxes (net price)

 
the machine can be used for:

* outer grinding
* surface grinding
* cone grinding
* edge grinding
* chamfering
* plunge grinding

 
technical data
(according to manufacturer)

height of tip: 120 mm
swing – Ø: 240 mm
width of tip: 800 mm

grinding wheel:

diameter: 300 mm
bore diameter: 76 mm
max. width of full grinding wheel during punch-grinding: 50 mm
greates total width of grinding wheel set: 80 mm
greatest sum of single widths: 50 mm
grinding wheel speeds: 1.870 / 2.085 rpm

grinding head:

pivot of grinding head: 90° in two layers
max. grinding head hub: 295 mm
max hub using hand wheel: 200 mm
autom. interval feed, infinitely adjustable: 0,0025 – 0,04 mm
hand wheel feed: 0 – 0,8 mm
automatic feed: 0 – 0,8 mm
feed via one revolution of the hand wheel: 1,0 mm
feed via one hand wheel unit: 0,01 mm
rapid traverse of grinding head: 50 mm
max. diameter adjustment: 2,0 mm
diameter adjustment via tipping switch: 0,005 mm
diameter adjustment via micro-stop: 0,001 mm

headstock spindle:

4 workpiece speeds, adjustable: 50 – 400 rpm
rotatability of headstock spindle against the grinding wheel: 90°
spindle cone or inner cone of headstock spindle: mk 5

tailstock:

inner cone of quill: mk 3
quill way: 60 mm

table:

max. table tilt: 7° each
table speed, adjustable: 150 – 7.000 mm / min.
min. table travel using hydraulic movement approx.: 4 mm
table oscillation during plunge grinding: 3 – 5 mm
table adjustment via hand, fine: hand wheel unit = 0,03 / 1 hand wheel revolution 7,5 mm
table adjustment via hand, rough: hand wheel unit = 0,12 / 1 hand wheel revolution 29,5 mm

drive power: approx. 4,0 kw
weight: approx. 2.600 kg
standing area: w 2,20 x d 1,30 x h 1,40 m
color: blue / grey-white

 
features

* manual or automatic operation
* upper table for cone grinding with fine adjustment and dial gauge
* automatic adjustment works as punch grinding adjustment, without adjustment,
* table-dependent adjustment: # right # left and right # left only
* rapid traverse infinitely adjustable
* creep traverse infinitely adjustable
* ejecting infinitely adjustable, can be disabled
* tailstock can be activated mechanically by hand lever or hydraulically via foot switch
* hydr. table oscillation
* 3 – b. – grinding padding Ø 200 mm, with inner and outer clamps (unused)
* fixed prick punch mk3 + mk5
* grinding stone puller, adjustable with diamond
* second grinding wheel flange with unused grinding wheel 300 x 50 mm
* wet-grinding equipment
* machine light
* operating manual


* if the year of construction has a “tuep.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tueb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation.  


all sales are subject to our terms and conditions. all information and technical data on this website is non-binding, errors excepted.

all prices will have an additional 19 % tax added (german “mehrwertsteuer/mwst.”) on your invoice. buyers from foreign countries will pay the net price without an additional tax, if they provide us with their ident.-nr.

all prices are ex-works, without packaging or delivery. the machine will be loaded on a truck free of charge, provided you pick it up at our warehouse.
the buyer bears the cost of packaging and delivery. packaging is done only after the buyer has signed a sales contract.

attention – important!!!
if you want us to facilitate the shipping with an external contractor, this will be done on behalf of and paid for by the buyer. we are not responsible for transport or unloading damage. by buying from us, you automatically agree to these terms and conditions.

also, consider taking a look at our other offers in stock.          %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 20% !!! HYDR. UNIVERSAL CYLINDRICAL GRINDING MACHINE WMW SU 240×800 MANUFACTURER: WMW SU 240×800 BUILD TYPE: REINECKER TYPE: SU 240×800 MACH.-NR.: 02910 YEAR OF CONSTRUCTION: ??? / 2018 TüP. COMM.-NR.: 3990699/009 STOCK-NR.: 1865 +++ SPECIAL PRICE: OLD 8.900,- € | NOW 7.120,- € +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) THE MACHINE CAN BE USED FOR: * OUTER GRINDING * SURFACE GRINDING * CONE GRINDING * EDGE GRINDING * CHAMFERING * PLUNGE GRINDING TECHNICAL DATA (ACCORDING TO MANUFACTURER) HEIGHT OF TIP: 120 MM SWING – Ø: 240 MM WIDTH OF TIP: 800 MM GRINDING WHEEL: DIAMETER: 300 MM BORE DIAMETER: 76 MM MAX. WIDTH OF FULL GRINDING WHEEL DURING PUNCH-GRINDING: 50 MM GREATES TOTAL WIDTH OF GRINDING WHEEL SET: 80 MM GREATEST SUM OF SINGLE WIDTHS: 50 MM GRINDING WHEEL SPEEDS: 1.870 / 2.085 RPM GRINDING HEAD: PIVOT OF GRINDING HEAD: 90° IN TWO LAYERS MAX. GRINDING HEAD HUB: 295 MM MAX HUB USING HAND WHEEL: 200 MM AUTOM. INTERVAL FEED, INFINITELY ADJUSTABLE: 0,0025 – 0,04 MM HAND WHEEL FEED: 0 – 0,8 MM AUTOMATIC FEED: 0 – 0,8 MM FEED VIA ONE REVOLUTION OF THE HAND WHEEL: 1,0 MM FEED VIA ONE HAND WHEEL UNIT: 0,01 MM RAPID TRAVERSE OF GRINDING HEAD: 50 MM MAX. DIAMETER ADJUSTMENT: 2,0 MM DIAMETER ADJUSTMENT VIA TIPPING SWITCH: 0,005 MM DIAMETER ADJUSTMENT VIA MICRO-STOP: 0,001 MM HEADSTOCK SPINDLE: 4 WORKPIECE SPEEDS, ADJUSTABLE: 50 – 400 RPM ROTATABILITY OF HEADSTOCK SPINDLE AGAINST THE GRINDING WHEEL: 90° SPINDLE CONE OR INNER CONE OF HEADSTOCK SPINDLE: MK 5 TAILSTOCK: INNER CONE OF QUILL: MK 3 QUILL WAY: 60 MM TABLE: MAX. TABLE TILT: 7° EACH TABLE SPEED, ADJUSTABLE: 150 – 7.000 MM / MIN. MIN. TABLE TRAVEL USING HYDRAULIC MOVEMENT APPROX.: 4 MM TABLE OSCILLATION DURING PLUNGE GRINDING: 3 – 5 MM TABLE ADJUSTMENT VIA HAND, FINE: HAND WHEEL UNIT = 0,03 / 1 HAND WHEEL REVOLUTION 7,5 MM TABLE ADJUSTMENT VIA HAND, ROUGH: HAND WHEEL UNIT = 0,12 / 1 HAND WHEEL REVOLUTION 29,5 MM DRIVE POWER: APPROX. 4,0 KW WEIGHT: APPROX. 2.600 KG STANDING AREA: W 2,20 X D 1,30 X H 1,40 M COLOR: BLUE / GREY-WHITE FEATURES * MANUAL OR AUTOMATIC OPERATION * UPPER TABLE FOR CONE GRINDING WITH FINE ADJUSTMENT AND DIAL GAUGE * AUTOMATIC ADJUSTMENT WORKS AS PUNCH GRINDING ADJUSTMENT, WITHOUT ADJUSTMENT, * TABLE-DEPENDENT ADJUSTMENT: # RIGHT # LEFT AND RIGHT # LEFT ONLY * RAPID TRAVERSE INFINITELY ADJUSTABLE * CREEP TRAVERSE INFINITELY ADJUSTABLE * EJECTING INFINITELY ADJUSTABLE, CAN BE DISABLED * TAILSTOCK CAN BE ACTIVATED MECHANICALLY BY HAND LEVER OR HYDRAULICALLY VIA FOOT SWITCH * HYDR. TABLE OSCILLATION * 3 – B. – GRINDING PADDING Ø 200 MM, WITH INNER AND OUTER CLAMPS (UNUSED) * FIXED PRICK PUNCH MK3 + MK5 * GRINDING STONE PULLER, ADJUSTABLE WITH DIAMOND * SECOND GRINDING WHEEL FLANGE WITH UNUSED GRINDING WHEEL 300 X 50 MM * WET-GRINDING EQUIPMENT * MACHINE LIGHT * OPERATING MANUAL * IF THE YEAR OF CONSTRUCTION HAS A “TUEP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TUEB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION. ALL SALES ARE SUBJECT TO OUR TERMS AND CONDITIONS. ALL INFORMATION AND TECHNICAL DATA ON THIS WEBSITE IS NON-BINDING, ERRORS EXCEPTED. ALL PRICES WILL HAVE AN ADDITIONAL 19 % TAX ADDED (GERMAN “MEHRWERTSTEUER/MWST.”) ON YOUR INVOICE. BUYERS FROM FOREIGN COUNTRIES WILL PAY THE NET PRICE WITHOUT AN ADDITIONAL TAX, IF THEY PROVIDE US WITH THEIR IDENT.-NR. ALL PRICES ARE EX-WORKS, WITHOUT PACKAGING OR DELIVERY. THE MACHINE WILL BE LOADED ON A TRUCK FREE OF CHARGE, PROVIDED YOU PICK IT UP AT OUR WAREHOUSE. THE BUYER BEARS THE COST OF PACKAGING AND DELIVERY. PACKAGING IS DONE ONLY AFTER THE BUYER HAS SIGNED A SALES CONTRACT. ATTENTION – IMPORTANT!!! IF YOU WANT US TO FACILITATE THE SHIPPING WITH AN EXTERNAL CONTRACTOR, THIS WILL BE DONE ON BEHALF OF AND PAID FOR BY THE BUYER. WE ARE NOT RESPONSIBLE FOR TRANSPORT OR UNLOADING DAMAGE. BY BUYING FROM US, YOU AUTOMATICALLY AGREE TO THESE TERMS AND CONDITIONS. ALSO, CONSIDER TAKING A LOOK AT OUR OTHER OFFERS IN STOCK.
Vendedor: ProHa Maschinen
Año de construcción: usado
Ubicación: Land-turning diameter:320 mm<br/>turning length:400 mm<br/>control:fanuc oi-tf  <br/>max. swing diameter:520 mm<br/>spindle speeds:4500 1/min.<br/>spindle drive:11 / 15 kw<br/><br/>brand new cnc slant bed lathe with    contains: 1. control system fanuc oi-tf (8,4\ TURNING DIAMETER:320 MM
TURNING LENGTH:400 MM
CONTROL:FANUC OI-TF
MAX. SWING DIAMETER:520 MM
SPINDLE SPEEDS:4500 1/MIN.
SPINDLE DRIVE:11 / 15 KW

BRAND NEW CNC SLANT BED LATHE WITH CONTAINS: 1. CONTROL SYSTEM FANUC OI-TF (8,4\" LCD MONITOR) 2. X/Z-AXIS STROKE 170/400 MM 3. X/Z-AXIS RAPID TRAVERSE 30/30 M/MIN 4. SPINDLE MOTOR 11 / 15 KW 5. SPINDLE SPEED 4500 RPM (BELT DRIVEN TYPE) 6. SPINDLE BEARING DIA. 100 MM 7. BAR CAPACITY DIA 51 MM) 8. HYDRAULIC HOLLOW CHUCK 8\" X 3 JAWS 9. HYD. UNIT FOR CHUCK WITH AIR COOLER 10. SERVO DRIVEN TURRET SYSTEM 12 STATIONS 11. MANUAL TAILSTOCK STROKE 275 MM + QUILL STROKE 100 MM 12. ELECTRICAL CABINET WITH HEAT EXCHANGER 13. STANDARD SPLASH GUARD 14. COOLANT UNIT 15. TRANSFORMER (POWER SOURCE 380V) 16. CHIP CONVEYOR H=1100 MM WITH TROLLEY (CHAIN TYPE) 17. MACHINE COLOR TONGTAI WHITE/DARK GREY 18. SAFETY FOOT SWITCH 19. TRICOLOR LAMP 20. FANUC WARRANTY (WESTERN EUROPE) STANDARD ACCESSORIES 1. FACING TOOL HOLDERS X 2 PCS 2. O.D. TOOL GASKET X 8 PCS 3. I.D. TOOL HOLDER (DIA 32 MM) X 4 PCS 4. BORING SLEEVE X 6 PCS (DIA 8, 10, 12, 16, 20, 25 MM) 5. DRILLING SLEEVE X 3 PCS (MT#1, 2, 3) 6. SOFT JAWS X 1 SET 7. ROTATING CENTER X 1 PC (MT#4) OPTIONS: 1. CE MARK 2. TOOL PRESETTER (MANUAL) 3. HARD JAWS X 1 SET 4. MANUAL GUIDE I FUNCTION + 10.4\" SCREEN WARRANTY: 12 MONTHS MACHINE IS MADE BY THE BIGGEST MAKER OF MACHINE TOOLS IN TAIWAN, ALSO BUILIDING FOR WELLKNOWN JAPANESE MAKERS.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 750 €
Ubicación: Land-we offer:<br/>  <br/>  panel rittal ps 4805 160x50x230cm anreihesytem / air teoilweis still equipped<br/>  (more anreihe system parts available.)<br/>  <br/>  the schaltschrack with the other komponnten was deployed to the stteuerng by machines in the wallpaper factory. see photos<br/>  <br/>  the plant originates from the assets of the paver in a wallpaper for vinylstruckturtapeten produced by 2011. the system worked until the closure of the plant.<br/>  <br/>  technical data<br/>  manufacturer: rittal<br/>  name: stand type cabinet with ventilation<br/>  type: ps 4805<br/>  <br/>  weight: estimated approx. 100 kg<br/>  <br/>  state. removed, see photos<br/>  <br/>  more assets in wallpaper manufacturing available:<br/>  -double processing fa.olbricht with goods store<br/>  -3 printing works fa. stork with dryer<br/>  -end ring an adhesive apparatus stork scr 85 230 v 1.08 kva<br/>  -longitudinal cutter<br/>  -jumbo roll dalren core size 100/150 cm,<br/>  -fully automatic folienstretch and packaging machine maf, tight packer sbp 475<br/>  -einlegervereinzeler pfannkuch, type asb 400 g<br/>  -packaging machine maf type kartomat 600, elmapo/starrpack/movomech carton packer, system, machines<br/>  carton printers mark-o-print, vacuum lifters, palletizers, pallet magazine with roller conveyor, stretcher with hydraulic power pack<br/>  -color mixing bucket/mixed boiler 3 x 500, 38 x 300, 9 x 100 and 9 x 60 litres<br/>  -squeegee wash<br/>  -centrifuge szb0 1000c 960 1 / min 6 loadings/h<br/>  -chiller of air cooled chillers climaserv gfc f 260 st 260 kw refrigeration capacity<br/>  - WE OFFER:

PANEL RITTAL PS 4805 160X50X230CM ANREIHESYTEM / AIR TEOILWEIS STILL EQUIPPED
(MORE ANREIHE SYSTEM PARTS AVAILABLE.)

THE SCHALTSCHRACK WITH THE OTHER KOMPONNTEN WAS DEPLOYED TO THE STTEUERNG BY MACHINES IN THE WALLPAPER FACTORY. SEE PHOTOS

THE PLANT ORIGINATES FROM THE ASSETS OF THE PAVER IN A WALLPAPER FOR VINYLSTRUCKTURTAPETEN PRODUCED BY 2011. THE SYSTEM WORKED UNTIL THE CLOSURE OF THE PLANT.

TECHNICAL DATA
MANUFACTURER: RITTAL
NAME: STAND TYPE CABINET WITH VENTILATION
TYPE: PS 4805

WEIGHT: ESTIMATED APPROX. 100 KG

STATE. REMOVED, SEE PHOTOS

MORE ASSETS IN WALLPAPER MANUFACTURING AVAILABLE:
-DOUBLE PROCESSING FA.OLBRICHT WITH GOODS STORE
-3 PRINTING WORKS FA. STORK WITH DRYER
-END RING AN ADHESIVE APPARATUS STORK SCR 85 230 V 1.08 KVA
-LONGITUDINAL CUTTER
-JUMBO ROLL DALREN CORE SIZE 100/150 CM,
-FULLY AUTOMATIC FOLIENSTRETCH AND PACKAGING MACHINE MAF, TIGHT PACKER SBP 475
-EINLEGERVEREINZELER PFANNKUCH, TYPE ASB 400 G
-PACKAGING MACHINE MAF TYPE KARTOMAT 600, ELMAPO/STARRPACK/MOVOMECH CARTON PACKER, SYSTEM, MACHINES
CARTON PRINTERS MARK-O-PRINT, VACUUM LIFTERS, PALLETIZERS, PALLET MAGAZINE WITH ROLLER CONVEYOR, STRETCHER WITH HYDRAULIC POWER PACK
-COLOR MIXING BUCKET/MIXED BOILER 3 X 500, 38 X 300, 9 X 100 AND 9 X 60 LITRES
-SQUEEGEE WASH
-CENTRIFUGE SZB0 1000C 960 1 / MIN 6 LOADINGS/H
-CHILLER OF AIR COOLED CHILLERS CLIMASERV GFC F 260 ST 260 KW REFRIGERATION CAPACITY
-
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Precio: 1.400 €
Ubicación: Land-description:<br />
for printing  of labels, bottles, packaging etc: prints only in black colors, incl. frame<br />
<br />
industrial ink jet printer<br />
<br />

<br />
besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines.<br />
you have a first idea or even a concrete plan? it does not matter how far your project is, we support you in every phase!<br />
or do you want to sell or market your machine? we also buy machines or provide you with a marketing concept.<br />
ask for your individual offer or visit us in knetzgau. concerning bigger projects we can of course also visit you in your company to do an on-site survey.<br />
our drink technicians are working worldwide for our customers!<br />
we are looking forward to hearing from you.<br />
<br />
all information is supplied without guarantee. DESCRIPTION:
FOR PRINTING OF LABELS, BOTTLES, PACKAGING ETC: PRINTS ONLY IN BLACK COLORS, INCL. FRAME

INDUSTRIAL INK JET PRINTER


BESIDES BUYING AND SELLING OF CONVEYORS AND MACHINES OUR STRENGTH LIES PARTICULARLY IN SERVICES AND PROJECT PLANNING, AS FOR EXAMPLE IN REBUILDING AND ADAPTING OF YOUR INSTALLATION AS WELL AS IN OVERHAUL AND RELOCATION OF MACHINES.
YOU HAVE A FIRST IDEA OR EVEN A CONCRETE PLAN? IT DOES NOT MATTER HOW FAR YOUR PROJECT IS, WE SUPPORT YOU IN EVERY PHASE!
OR DO YOU WANT TO SELL OR MARKET YOUR MACHINE? WE ALSO BUY MACHINES OR PROVIDE YOU WITH A MARKETING CONCEPT.
ASK FOR YOUR INDIVIDUAL OFFER OR VISIT US IN KNETZGAU. CONCERNING BIGGER PROJECTS WE CAN OF COURSE ALSO VISIT YOU IN YOUR COMPANY TO DO AN ON-SITE SURVEY.
OUR DRINK TECHNICIANS ARE WORKING WORLDWIDE FOR OUR CUSTOMERS!
WE ARE LOOKING FORWARD TO HEARING FROM YOU.

ALL INFORMATION IS SUPPLIED WITHOUT GUARANTEE.
Vendedor: DRINK Getränkemaschinen GmbH
Año de construcción: usado
Ubicación: Land-offer consists of:<br/> <br/> - high performance-finisher docucutter dc-645<br/> <br/> duplo docucutter dc-645<br/> high performance-finisher for digital color printing:<br/> <br/> - feeder: <br/> air-suction feeder with lining up<br/> - operation: by lcd-display<br/> - control: barcode control<br/> <br/> - saveable jobs: 80 memories for repeat orders<br/> - error avoidance: <br/> ultrasonic-doublefeed control<br/> eject gate<br/> testprogram<br/> print mark reader<br/> <br/> <br/> - integrated knives: <br/> 6 lengthwise knives + 1 cross knife<br/> <br/> - size:  <br/> max. 650x370mm<br/> min. 210x210mm<br/> <br/> - paper weight: <br/> 110-350g/qm<br/> <br/> - loading height: 100mm<br/> <br/> - creasing each sheet: max. 10<br/> <br/> - production speed: <br/> max. 1500 sheets/h (a4)<br/> max.   720 sheets/h (a3)<br/> <br/> - power: 230v / 50hz - 0,3kw<br/> - dimensions: 2.240x750x1.115mm<br/> - weight: 360kg; very good OFFER CONSISTS OF:

- HIGH PERFORMANCE-FINISHER DOCUCUTTER DC-645

DUPLO DOCUCUTTER DC-645
HIGH PERFORMANCE-FINISHER FOR DIGITAL COLOR PRINTING:

- FEEDER:
AIR-SUCTION FEEDER WITH LINING UP
- OPERATION: BY LCD-DISPLAY
- CONTROL: BARCODE CONTROL

- SAVEABLE JOBS: 80 MEMORIES FOR REPEAT ORDERS
- ERROR AVOIDANCE:
ULTRASONIC-DOUBLEFEED CONTROL
EJECT GATE
TESTPROGRAM
PRINT MARK READER


- INTEGRATED KNIVES:
6 LENGTHWISE KNIVES + 1 CROSS KNIFE

- SIZE:
MAX. 650X370MM
MIN. 210X210MM

- PAPER WEIGHT:
110-350G/QM

- LOADING HEIGHT: 100MM

- CREASING EACH SHEET: MAX. 10

- PRODUCTION SPEED:
MAX. 1500 SHEETS/H (A4)
MAX. 720 SHEETS/H (A3)

- POWER: 230V / 50HZ - 0,3KW
- DIMENSIONS: 2.240X750X1.115MM
- WEIGHT: 360KG; VERY GOOD
Vendedor: LA-POSTPRESS Landauer Alexander
Año de construcción: usado
Ubicación: Land-x-travel:1050 mm<br/>y-travel:600 mm<br/>z-travel:530 mm<br/>table-size:1100x600 mm<br/>t-slots:18x5 (breite x anz.) mm<br/>max. table load:800 kg<br/>distance spindle center to table:100-600 mm<br/>rapid traverse in x-y-z axis:48/48/48 m<br/>milling feed range:1-12.000 mm/min<br/>spindle speed:10.000 1/min<br/>spindle taper:40 bt<br/>spindle drive:10 (riemen) kw<br/>positioning accuracy: mm<br/>repeating accuracy: mm<br/>tool changer:30 fach<br/>max. tool weight:7 kg<br/>tool diameter:89 (voll)/125 (leer) mm<br/>workpiece length:250 mm<br/>dimensions:2780x2500x2810 mm<br/>weight of the machine ca.:7,1 t<br/>cnc controller:heidenhain tnc620 (mc1620) <br/>chip conveyor with chip bucket: <br/>automatic tool changer:30 fach<br/>signal lamp: <br/>halogen lamp: <br/>coolant system: <br/>water gun: <br/>rigid tapping: <br/>foundation: <br/>ce-design: <br/>metric, 400v 50hz 3 phase: <br/>: <br/>fully enclosed: <br/>tool setter:option von blum <br/>automatic lubrication system: <br/>inner coolant:20 bar <br/>linear guide: <br/>mpg hand wheel: <br/>: <br/>air conditioner for cabinet: <br/>spindle oil cooler: <br/>chip conveyor:typ schnecke im maschinenbett, 2 stück <br/><br/>factory-new, immediately available, vertical cnc machining center with:  1. control system heidenhain tnc620 (mc1620) 2. working table size 1100 × 600 mm 3. x/y/z axis stroke 1050/600/530 mm 4. x/y/z axis rapid traverse 48/48/48 m/min 5. spindle motor 7.5 (qan 200l) 6. spindle speed 8000 rpm (belt-driven type) 7. spindle nose nt#40 (bt40) 8. atc capacity 24 tools 9. standard splash guard 10. manual pulse generator 11. coolant unit 12. rigid tapping 13. without transformer (power source 380v) 14. auger type chips screws inside of machine bed 15. machine color tongtai grey/blue 16. tricolor light 17. heidenhain warranty options: 1. ce mark 2. spindle speed 10.000 rpm, 10kw qan 200l (belt driven type) 3. spindle cooler 4. coolant through spindle with high pressure pump (20 bar) filtersystem type a 5. full splash cover 6. atc tool capacity 30 tools 7. a/c for electrical cabinet 8. manual guide i function + 10.4\ X-TRAVEL:1050 MM
Y-TRAVEL:600 MM
Z-TRAVEL:530 MM
TABLE-SIZE:1100X600 MM
T-SLOTS:18X5 (BREITE X ANZ.) MM
MAX. TABLE LOAD:800 KG
DISTANCE SPINDLE CENTER TO TABLE:100-600 MM
RAPID TRAVERSE IN X-Y-Z AXIS:48/48/48 M
MILLING FEED RANGE:1-12.000 MM/MIN
SPINDLE SPEED:10.000 1/MIN
SPINDLE TAPER:40 BT
SPINDLE DRIVE:10 (RIEMEN) KW
POSITIONING ACCURACY: MM
REPEATING ACCURACY: MM
TOOL CHANGER:30 FACH
MAX. TOOL WEIGHT:7 KG
TOOL DIAMETER:89 (VOLL)/125 (LEER) MM
WORKPIECE LENGTH:250 MM
DIMENSIONS:2780X2500X2810 MM
WEIGHT OF THE MACHINE CA.:7,1 T
CNC CONTROLLER:HEIDENHAIN TNC620 (MC1620)
CHIP CONVEYOR WITH CHIP BUCKET:
AUTOMATIC TOOL CHANGER:30 FACH
SIGNAL LAMP:
HALOGEN LAMP:
COOLANT SYSTEM:
WATER GUN:
RIGID TAPPING:
FOUNDATION:
CE-DESIGN:
METRIC, 400V 50HZ 3 PHASE:
:
FULLY ENCLOSED:
TOOL SETTER:OPTION VON BLUM
AUTOMATIC LUBRICATION SYSTEM:
INNER COOLANT:20 BAR
LINEAR GUIDE:
MPG HAND WHEEL:
:
AIR CONDITIONER FOR CABINET:
SPINDLE OIL COOLER:
CHIP CONVEYOR:TYP SCHNECKE IM MASCHINENBETT, 2 STüCK

FACTORY-NEW, IMMEDIATELY AVAILABLE, VERTICAL CNC MACHINING CENTER WITH: 1. CONTROL SYSTEM HEIDENHAIN TNC620 (MC1620) 2. WORKING TABLE SIZE 1100 × 600 MM 3. X/Y/Z AXIS STROKE 1050/600/530 MM 4. X/Y/Z AXIS RAPID TRAVERSE 48/48/48 M/MIN 5. SPINDLE MOTOR 7.5 (QAN 200L) 6. SPINDLE SPEED 8000 RPM (BELT-DRIVEN TYPE) 7. SPINDLE NOSE NT#40 (BT40) 8. ATC CAPACITY 24 TOOLS 9. STANDARD SPLASH GUARD 10. MANUAL PULSE GENERATOR 11. COOLANT UNIT 12. RIGID TAPPING 13. WITHOUT TRANSFORMER (POWER SOURCE 380V) 14. AUGER TYPE CHIPS SCREWS INSIDE OF MACHINE BED 15. MACHINE COLOR TONGTAI GREY/BLUE 16. TRICOLOR LIGHT 17. HEIDENHAIN WARRANTY OPTIONS: 1. CE MARK 2. SPINDLE SPEED 10.000 RPM, 10KW QAN 200L (BELT DRIVEN TYPE) 3. SPINDLE COOLER 4. COOLANT THROUGH SPINDLE WITH HIGH PRESSURE PUMP (20 BAR) FILTERSYSTEM TYPE A 5. FULL SPLASH COVER 6. ATC TOOL CAPACITY 30 TOOLS 7. A/C FOR ELECTRICAL CABINET 8. MANUAL GUIDE I FUNCTION + 10.4\" LCD MONITOR 9. CHIP CONVEYOR H=1100 MM WITH TROLLEY (CHAIN TYPE) OUR TAIWANESE SUPPLIER IS THE LARGEST MANUFACTURER IN TAIWAN AND ALSO BUILDS LATHES AND MACHINING CENTERS FOR WELL-KNOWN JAPANESE MANUFACTURERS. THE DELIVERY WAREHOUSE IS IN THE NETHERLANDS. WE CARRY OUT THE PERSONNEL SERVICE FOR THESE MACHINES. SPARE PARTS ARE AVAILABLE IN THE NETHERLANDS AND CAN BE DELIVERED AT SHORT NOTICE. HOWEVER, WE ARE THE FIRST POINT OF CONTACT IN ALL MATTERS, WHETHER IT IS DELIVERY, ASSEMBLY / COMMISSIONING, TRAINING OR AFTER-SALES SERVICE. FURTHER DATA CAN BE FOUND IN THE ANNEXES. BENEFIT FROM THE FAVORABLE LEASING AND HIRE-PURCHASE CONDITIONS OF ABC LEASING: ASK US ABOUT IT! INSTALLATION AND SERVICE POSSIBLE BY QUALIFIED PERSONNEL.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 6.720 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 20% !!!


hydr. cylindrical grinding machine wmw marathon-werke sa 240

manufacturer: wmw marathon-werke
build type: reinecker
type: sa 240
mach.-nr.: 66973
year of construction: 1988* / 2018 tüp.
comm.-nr.: 3990700/009
stock-nr.: 1867


+++ special price: old 8.400,- € | now 6.720,- €
+++ all prices are shown without taxes (net price)

 
the machine can be used for:

* outer grinding
* surface grinding
* cone grinding
* edge grinding
* chamfering
* plunge grinding

 
technical data
(according to manufacturer)

height of tip: 120 mm
swing – Ø: 240 mm
width of tip: 630 mm

grinding wheel:

diameter: 400 mm
bore diameter: 127 mm
max. width of full grinding wheel during punch-grinding: 50 mm
greates total width of grinding wheel set: 80 mm
greatest sum of single widths: 50 mm
grinding wheel speed: 1.650 rpm = 35 m / s

grinding head:

max. grinding head hub: 295 mm
max hub using hand wheel: 200 mm
additional hub: 95 mm
autom. interval feed, infinitely adjustable: 0,0025 – 0,04 mm
hand wheel feed: 0 – 0,8 mm
automatic feed: 0 – 0,8 mm
feed via one revolution of the hand wheel: 1,0 mm
feed via one hand wheel unit: 0,01 mm
rapid traverse of grinding head: 40 mm
max. diameter adjustment: 2,0 mm
diameter adjustment via tipping switch: 0,005 mm
diameter adjustment via micro-stop: 0,001 mm

headstock spindle:

4 workpiece speeds, adjustable: 50 – 400 rpm
rotatability of headstock spindle against the grinding wheel: 90°
spindle cone or inner cone of headstock spindle: mk 4

tailstock:

inner cone of quill: mk 3
quill way: 60 mm
table:

max. table tilt: 10° each
max. cone angle: 20°
table speed, adjustable: 30 – 3.000 mm / min.
min. table travel using hydraulic movement approx.: 3 mm
table oscillation during plunge grinding: 3 – 5 mm
table adjustment via hand, fine: hand wheel unit = 0,03 / 1 hand wheel revolution 7,5 mm
table adjustment via hand, rough: hand wheel unit = 0,12 / 1 hand wheel revolution 29,5 mm

drive power: approx. 8,5 kw
weight: approx. 2.400 kg
standing area: w 1,90 x d 1,30 x h 1,40 m
color: blue / grey-white

 
features

* manual or automatic operation
* upper table for cone grinding with fine adjustment and dial gauge
* automatic adjustment works as punch grinding adjustment, without adjustment,
* table-dependent adjustment: # right # left and right # left only
* rapid traverse infinitely adjustable
* creep traverse infinitely adjustable
* ejecting infinitely adjustable, can be disabled
* tailstock can be activated mechanically by hand lever or hydraulically via foot switch
* hydr. table oscillation
* 3 – b. – grinding padding Ø 125 mm, with inner and outer clamps (unused)
* fixed prick punch mk3
* universal grinding stone puller, adjustable and tiltable
* second grinding wheel flange with grinding wheel
* wet-grinding equipment with magnetic filter



* if the year of construction has a “tuep.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tueb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation.   


all sales are subject to our terms and conditions. all information and technical data on this website is non-binding, errors excepted.

all prices will have an additional 19 % tax added (german “mehrwertsteuer/mwst.”) on your invoice. buyers from foreign countries will pay the net price without an additional tax, if they provide us with their ident.-nr.

all prices are ex-works, without packaging or delivery. the machine will be loaded on a truck free of charge, provided you pick it up at our warehouse.
the buyer bears the cost of packaging and delivery. packaging is done only after the buyer has signed a sales contract.

attention – important!!!
if you want us to facilitate the shipping with an external contractor, this will be done on behalf of and paid for by the buyer. we are not responsible for transport or unloading damage. by buying from us, you automatically agree to these terms and conditions.

also, consider taking a look at our other offers in stock.           %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 20% !!! HYDR. CYLINDRICAL GRINDING MACHINE WMW MARATHON-WERKE SA 240 MANUFACTURER: WMW MARATHON-WERKE BUILD TYPE: REINECKER TYPE: SA 240 MACH.-NR.: 66973 YEAR OF CONSTRUCTION: 1988* / 2018 TüP. COMM.-NR.: 3990700/009 STOCK-NR.: 1867 +++ SPECIAL PRICE: OLD 8.400,- € | NOW 6.720,- € +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) THE MACHINE CAN BE USED FOR: * OUTER GRINDING * SURFACE GRINDING * CONE GRINDING * EDGE GRINDING * CHAMFERING * PLUNGE GRINDING TECHNICAL DATA (ACCORDING TO MANUFACTURER) HEIGHT OF TIP: 120 MM SWING – Ø: 240 MM WIDTH OF TIP: 630 MM GRINDING WHEEL: DIAMETER: 400 MM BORE DIAMETER: 127 MM MAX. WIDTH OF FULL GRINDING WHEEL DURING PUNCH-GRINDING: 50 MM GREATES TOTAL WIDTH OF GRINDING WHEEL SET: 80 MM GREATEST SUM OF SINGLE WIDTHS: 50 MM GRINDING WHEEL SPEED: 1.650 RPM = 35 M / S GRINDING HEAD: MAX. GRINDING HEAD HUB: 295 MM MAX HUB USING HAND WHEEL: 200 MM ADDITIONAL HUB: 95 MM AUTOM. INTERVAL FEED, INFINITELY ADJUSTABLE: 0,0025 – 0,04 MM HAND WHEEL FEED: 0 – 0,8 MM AUTOMATIC FEED: 0 – 0,8 MM FEED VIA ONE REVOLUTION OF THE HAND WHEEL: 1,0 MM FEED VIA ONE HAND WHEEL UNIT: 0,01 MM RAPID TRAVERSE OF GRINDING HEAD: 40 MM MAX. DIAMETER ADJUSTMENT: 2,0 MM DIAMETER ADJUSTMENT VIA TIPPING SWITCH: 0,005 MM DIAMETER ADJUSTMENT VIA MICRO-STOP: 0,001 MM HEADSTOCK SPINDLE: 4 WORKPIECE SPEEDS, ADJUSTABLE: 50 – 400 RPM ROTATABILITY OF HEADSTOCK SPINDLE AGAINST THE GRINDING WHEEL: 90° SPINDLE CONE OR INNER CONE OF HEADSTOCK SPINDLE: MK 4 TAILSTOCK: INNER CONE OF QUILL: MK 3 QUILL WAY: 60 MM TABLE: MAX. TABLE TILT: 10° EACH MAX. CONE ANGLE: 20° TABLE SPEED, ADJUSTABLE: 30 – 3.000 MM / MIN. MIN. TABLE TRAVEL USING HYDRAULIC MOVEMENT APPROX.: 3 MM TABLE OSCILLATION DURING PLUNGE GRINDING: 3 – 5 MM TABLE ADJUSTMENT VIA HAND, FINE: HAND WHEEL UNIT = 0,03 / 1 HAND WHEEL REVOLUTION 7,5 MM TABLE ADJUSTMENT VIA HAND, ROUGH: HAND WHEEL UNIT = 0,12 / 1 HAND WHEEL REVOLUTION 29,5 MM DRIVE POWER: APPROX. 8,5 KW WEIGHT: APPROX. 2.400 KG STANDING AREA: W 1,90 X D 1,30 X H 1,40 M COLOR: BLUE / GREY-WHITE FEATURES * MANUAL OR AUTOMATIC OPERATION * UPPER TABLE FOR CONE GRINDING WITH FINE ADJUSTMENT AND DIAL GAUGE * AUTOMATIC ADJUSTMENT WORKS AS PUNCH GRINDING ADJUSTMENT, WITHOUT ADJUSTMENT, * TABLE-DEPENDENT ADJUSTMENT: # RIGHT # LEFT AND RIGHT # LEFT ONLY * RAPID TRAVERSE INFINITELY ADJUSTABLE * CREEP TRAVERSE INFINITELY ADJUSTABLE * EJECTING INFINITELY ADJUSTABLE, CAN BE DISABLED * TAILSTOCK CAN BE ACTIVATED MECHANICALLY BY HAND LEVER OR HYDRAULICALLY VIA FOOT SWITCH * HYDR. TABLE OSCILLATION * 3 – B. – GRINDING PADDING Ø 125 MM, WITH INNER AND OUTER CLAMPS (UNUSED) * FIXED PRICK PUNCH MK3 * UNIVERSAL GRINDING STONE PULLER, ADJUSTABLE AND TILTABLE * SECOND GRINDING WHEEL FLANGE WITH GRINDING WHEEL * WET-GRINDING EQUIPMENT WITH MAGNETIC FILTER * IF THE YEAR OF CONSTRUCTION HAS A “TUEP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TUEB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION. ALL SALES ARE SUBJECT TO OUR TERMS AND CONDITIONS. ALL INFORMATION AND TECHNICAL DATA ON THIS WEBSITE IS NON-BINDING, ERRORS EXCEPTED. ALL PRICES WILL HAVE AN ADDITIONAL 19 % TAX ADDED (GERMAN “MEHRWERTSTEUER/MWST.”) ON YOUR INVOICE. BUYERS FROM FOREIGN COUNTRIES WILL PAY THE NET PRICE WITHOUT AN ADDITIONAL TAX, IF THEY PROVIDE US WITH THEIR IDENT.-NR. ALL PRICES ARE EX-WORKS, WITHOUT PACKAGING OR DELIVERY. THE MACHINE WILL BE LOADED ON A TRUCK FREE OF CHARGE, PROVIDED YOU PICK IT UP AT OUR WAREHOUSE. THE BUYER BEARS THE COST OF PACKAGING AND DELIVERY. PACKAGING IS DONE ONLY AFTER THE BUYER HAS SIGNED A SALES CONTRACT. ATTENTION – IMPORTANT!!! IF YOU WANT US TO FACILITATE THE SHIPPING WITH AN EXTERNAL CONTRACTOR, THIS WILL BE DONE ON BEHALF OF AND PAID FOR BY THE BUYER. WE ARE NOT RESPONSIBLE FOR TRANSPORT OR UNLOADING DAMAGE. BY BUYING FROM US, YOU AUTOMATICALLY AGREE TO THESE TERMS AND CONDITIONS. ALSO, CONSIDER TAKING A LOOK AT OUR OTHER OFFERS IN STOCK.
Vendedor: ProHa Maschinen
Año de construcción: usado
Ubicación: Land-turning diameter:220 mm<br/>turning length:200 mm<br/>control:fanuc 0i-tf <br/>bar material dia.:26 (51mm opt.) mm<br/>spindle speeds:6000 (4500 opt.) 1/min.<br/>rapid speed:20 m/min<br/>spindle drive:7,5/11 kw<br/><br/>contains:  1.control system fanuc 0i-td (8.4\ TURNING DIAMETER:220 MM
TURNING LENGTH:200 MM
CONTROL:FANUC 0I-TF
BAR MATERIAL DIA.:26 (51MM OPT.) MM
SPINDLE SPEEDS:6000 (4500 OPT.) 1/MIN.
RAPID SPEED:20 M/MIN
SPINDLE DRIVE:7,5/11 KW

CONTAINS: 1.CONTROL SYSTEM FANUC 0I-TD (8.4\"COLOR LCD) 2.SPINDLE MOTOR 7.5/11KW FANUC â8/8000I 3.SPINDLE SPEED 6.000 RPM (BAR CAPACITY: DIA 26MM) 4.X/Z-AXIS STROKE 155/220 MM 5.X/Z AXIS RAPID TRAVERSE 20/20 M/MIN 6.HYD.HOLLOW CHUCK 6\" X 3 JAWS 7.HYDRAULIC TURRET SYSTEM 12 STATIONS 8.HYD. UNIT FOR CHUCK WITH AIR COOLER 9.WITHOUT TAILSTOCK 10.STANDARD SPLASH GUARD 11.ELECTRICAL CABINET WITH HEAT EXCHANGER 12.COOLANT UNIT 13.TRANSFORMER 14.CHIP CONVEYOR WITH TROLLEY (CHAIN TYPE) 15.MACHINE COLOR TONGTAI GREY/BLUE 16.FANUC WARRANTY STANDARD ACCESSORIES: 1.O.D. TOOL HOLDER X 2 PCS 2.O.D. TOOL GASKET X 6 PCS 3.I.D. TOOL HOLDER X 4 PCS 4.ID TOOL HOLDER DIA 32MM X 4 PCS 5.BORING SLEEVE X 6 PCS (DIA 10,12,16,20,25,32) 6.DRILLING SLEEVE X 3 PCS (MT#1,2,3) 7.SOFT JAWS X 1 SET OPTIONS: 1.CE MARK 2.BALANCE OF SPINDLE DIA 85 MM WITH BAR CAPACITY DIE 44 MM SPINDLE SPEED 4800 RPM & HYD. HOLLOW CHUCK 8\" X 3 JAWS 3.TOOL PRESETTER (BY MANUAL) 4.ADD SOFT JAWS X 5 SETS FOR 8\"CHUCK 5.HARD JAWS X 1 SET (FOR 8\"CHUCK USE) 6. DYNAMIC GRAPHIC DISPLAY FUNCTION
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 50 €
Ubicación: Land-your contact person in our home:<br/>  <br/>  mr: andré evening mr: marcel brahms<br/>  mr: simon blank<br/>  <br/>  we offer you here a used starting protection guard rail for sale.<br/>  <br/>  (see pictures)<br/>  <br/>  included in the scope of delivery:<br/>  <br/>  01 x start-up safety guardrail, used<br/>  material color: orange<br/>  marking: yellow/black<br/>  overall length: approx. 2.200 mm<br/>  total height: approx. 305 mm<br/>  interior height: approx. 235 mm<br/>  material thickness: 5 mm<br/>  profilabm.: ca. 165 x 50 mm<br/>  hole diameter: approx. 15 mm<br/>  hole spacing: approx. 55 mm number of holes: 2 x 4 hole<br/>  <br/>  our services at a glance:<br/>  (prices on request)<br/>  <br/>  -installation, construction<br/>  our general conditions of erection are to be observed<br/>  <br/>  -shelf testing<br/>  shelf inspection according to din en 15635 carried out according to the<br/>  requirements of bgr 234 visual inspection for all shelf systems<br/>  <br/>  -delivery with our own fleet of vehicles<br/>  (without discharge) YOUR CONTACT PERSON IN OUR HOME:

MR: ANDRé EVENING MR: MARCEL BRAHMS
MR: SIMON BLANK

WE OFFER YOU HERE A USED STARTING PROTECTION GUARD RAIL FOR SALE.

(SEE PICTURES)

INCLUDED IN THE SCOPE OF DELIVERY:

01 X START-UP SAFETY GUARDRAIL, USED
MATERIAL COLOR: ORANGE
MARKING: YELLOW/BLACK
OVERALL LENGTH: APPROX. 2.200 MM
TOTAL HEIGHT: APPROX. 305 MM
INTERIOR HEIGHT: APPROX. 235 MM
MATERIAL THICKNESS: 5 MM
PROFILABM.: CA. 165 X 50 MM
HOLE DIAMETER: APPROX. 15 MM
HOLE SPACING: APPROX. 55 MM NUMBER OF HOLES: 2 X 4 HOLE

OUR SERVICES AT A GLANCE:
(PRICES ON REQUEST)

-INSTALLATION, CONSTRUCTION
OUR GENERAL CONDITIONS OF ERECTION ARE TO BE OBSERVED

-SHELF TESTING
SHELF INSPECTION ACCORDING TO DIN EN 15635 CARRIED OUT ACCORDING TO THE
REQUIREMENTS OF BGR 234 VISUAL INSPECTION FOR ALL SHELF SYSTEMS

-DELIVERY WITH OUR OWN FLEET OF VEHICLES
(WITHOUT DISCHARGE)
Vendedor: Lücht & Palm GmbH
Año de construcción: usado
Ubicación: Land-x-travel:1050 mm<br/>y-travel:850 mm<br/>z-travel:970 mm<br/>distance spindle nose and table:100-950 mm<br/>distance spindle center to table:100-1070 mm<br/>table height over floor:1300 mm<br/>pallet table size:630x630 mm<br/>max. workpiece weight:1200x2 kg<br/>table - indexing:1° (optional 0,001°) <br/>max. workpiece height:1100x1100 mm<br/>spindle speeds:10000 1/min<br/>spindle drive:30/25 kw<br/>spindle speed steps:2 <br/>spindle nose:50 sk/bt<br/>rapid speed:50 m/min<br/>feeds:1-20000 mm/u<br/>tool taper:50 sk/bt<br/>tool changer:60 fach<br/>tool diameter:125 mm<br/>weight of tools max.:25 kg<br/>workpiece length:610 mm<br/>number of pallets:2 <br/>weight of the machine ca.:21600 kg<br/>automatic tool changer:60 fach<br/>cnc rotary table:1 °<br/>inner coolant:15 bar<br/>chip conveyor - auger: <br/>chip conveyor with chip bucket: <br/>: <br/>: <br/>ce-design: <br/>cnc controller:siemens/fanuc/heidenhain <br/>servo motors:vom steuerungshersteller <br/>spindle oil cooler: <br/>ce-certificate: <br/>fully enclosed: <br/>signal lamp: <br/>halogen lamp: <br/>mpg hand wheel: <br/>: <br/>atc:80/120 <br/>cts:35 oder 70 bar <br/>linear scales: <br/>cnc controls from:siemens/fanuc/heidenhain <br/>tool measuring system:von renishaw <br/>workpiece measurement system:von renishaw <br/>chip conveyor and trolley:mit magnetabscheider <br/>automatic pallet changer apc:6-fach und mehr auf anfrage <br/>cnc-rotary table:0,001 grad indexierung  <br/><br/>brand new horizontal machining center with:   contains:  1. control system fanuc oi-mf (10.4\ X-TRAVEL:1050 MM
Y-TRAVEL:850 MM
Z-TRAVEL:970 MM
DISTANCE SPINDLE NOSE AND TABLE:100-950 MM
DISTANCE SPINDLE CENTER TO TABLE:100-1070 MM
TABLE HEIGHT OVER FLOOR:1300 MM
PALLET TABLE SIZE:630X630 MM
MAX. WORKPIECE WEIGHT:1200X2 KG
TABLE - INDEXING:1° (OPTIONAL 0,001°)
MAX. WORKPIECE HEIGHT:1100X1100 MM
SPINDLE SPEEDS:10000 1/MIN
SPINDLE DRIVE:30/25 KW
SPINDLE SPEED STEPS:2
SPINDLE NOSE:50 SK/BT
RAPID SPEED:50 M/MIN
FEEDS:1-20000 MM/U
TOOL TAPER:50 SK/BT
TOOL CHANGER:60 FACH
TOOL DIAMETER:125 MM
WEIGHT OF TOOLS MAX.:25 KG
WORKPIECE LENGTH:610 MM
NUMBER OF PALLETS:2
WEIGHT OF THE MACHINE CA.:21600 KG
AUTOMATIC TOOL CHANGER:60 FACH
CNC ROTARY TABLE:1 °
INNER COOLANT:15 BAR
CHIP CONVEYOR - AUGER:
CHIP CONVEYOR WITH CHIP BUCKET:
:
:
CE-DESIGN:
CNC CONTROLLER:SIEMENS/FANUC/HEIDENHAIN
SERVO MOTORS:VOM STEUERUNGSHERSTELLER
SPINDLE OIL COOLER:
CE-CERTIFICATE:
FULLY ENCLOSED:
SIGNAL LAMP:
HALOGEN LAMP:
MPG HAND WHEEL:
:
ATC:80/120
CTS:35 ODER 70 BAR
LINEAR SCALES:
CNC CONTROLS FROM:SIEMENS/FANUC/HEIDENHAIN
TOOL MEASURING SYSTEM:VON RENISHAW
WORKPIECE MEASUREMENT SYSTEM:VON RENISHAW
CHIP CONVEYOR AND TROLLEY:MIT MAGNETABSCHEIDER
AUTOMATIC PALLET CHANGER APC:6-FACH UND MEHR AUF ANFRAGE
CNC-ROTARY TABLE:0,001 GRAD INDEXIERUNG

BRAND NEW HORIZONTAL MACHINING CENTER WITH: CONTAINS: 1. CONTROL SYSTEM FANUC OI-MF (10.4\" SCREEN) 2. WORKING TABLE SIZE: 400 X 400 MM 3. MAX. WORKPIECE DIMENSION: DIA. 630 X H 800 MM 4. MAX. TABLE LOAD CAPACITY: 400 KGS X 2 PALLETS 5. SPINDLE CENTER TO TABLE SURFACE: 80 ~ 660 MM 6. TABLE CENTER TO SPINDLE NOSE: 70 ~ 650 MM 7. X/Y/Z STROKE 610/580/580 MM 8. X/Y/Z STROKE RAPID TRAVERSE: 60/60/60 M/MIN 9. SPINDLE MOTOR 22/25 KW (BUILT-IN TYPE) 10. SPINDLE SPEED 12000 RPM WITH SPINDLE COOLER 11. SPINDLE NOSE NT#40 (BT40) 12. ATC CAPACITY 60 TOOLS 13. COOLANT UNIT (REAR SIDE OF MACHINE) 14. COOLANT THRU. SPINDLE W/H HIGH PRESSURE PUMP (20BAR) AND FILTER SYSTEM (A TYPE) 15. FULL SPLASH COVER 16. ROTART TYPE APC UNIT X 2 WORKING PALLETS (400X400MM) 17. 4TH AXIS (B-AXIS) FUNCTION INDEX 1 DEGREE POSITIONING 18. ELECTRIC CABINET WITH HEAT EXCHANGER 19. TRANSFORMER (POWER SOURCE 380V) 20. RIGID TAPPING 21. MANUAL PULSE GENERATOR 22. CHIP CONVEYOR H=1100 MM WITH TROLLEY (INTEGRATED TYPE)ON THE REAR SIDE 23. AUGER TYPE CHIP SCREWS INSIDE OF MACHINE BED 24. NEW DESIGN MACHINE COVER & COLOR SCHEME 25. FANUC WARRANTY OPTIONS: 1. CE MARK 2. BALANCE OF 4TH AXIS (B-AXIS) INDEX 0.001 POSITIONING 3. COOLANT GUN WITH ON/OFF SWITCH 4. OIL SKIMMER (DISC TYPE) 5. MANUAL GUIDE I FUNCTION
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 410 €
Ubicación: Land-we offer:<br/>  <br/>  color mixing container mixing tank agitator vessel of drais 500 l on castors<br/>  <br/>  the color mixing buckets are part of a wallpaper manufacturing facility. they are accessories to the drais color mixing plants (dissolver) type rn 218 (sold)<br/>  <br/>  the plant originates from the assets of a wallpaper paver for vinyl tree wallpaper or flat vinyl wallpaper.<br/>  it is part of a complete wallpaper manufacturing line up 2011<br/>  has produced. the facility was closed due to the market development. some components are recyclable.<br/>  <br/>  technical data:<br/>  manufacturer: drais<br/>  name: color mixing container mixing tank agitator container<br/>  year of constr.: probably in 1985<br/>  material: steel sheet<br/>  diameter: 100 cm<br/>  height: 90 cm (about everything)<br/>  weight: estimated 150 kg<br/>  <br/>  2 units available<br/>  <br/>  other containers for 300, 100, 60 liter available (60 l in stainless steel)<br/>  <br/>  furthermore we offer:<br/>  <br/>  -truck iveco eurocargo 75e16/p with liftgate deregistered 245000 km<br/>  -grundfos magna 65-60 f 340 mm energiesparpumpe / circulation pump with shut-off valve<br/>  -eccentric press ambold to edsp 55, pressing force 55 mp thickness up to 4, 5 mm<br/>  -eccentric press hamilton 40skr, pressing force: 40 t<br/>  -grundfos ups 65-120/2f 340 mm pump ~ 3 400v 850-1150w with.<br/>  -cross traverse mkf with adjustable hook 1200 kg d = 500-1400 mm<br/>  -belimo nf24a-s2 spring return actuator, damper actuator, on-off, ac/dc 24 v, 10 nm, with 2 integrated auxiliary contacts<br/>  -damper tro WE OFFER:

COLOR MIXING CONTAINER MIXING TANK AGITATOR VESSEL OF DRAIS 500 L ON CASTORS

THE COLOR MIXING BUCKETS ARE PART OF A WALLPAPER MANUFACTURING FACILITY. THEY ARE ACCESSORIES TO THE DRAIS COLOR MIXING PLANTS (DISSOLVER) TYPE RN 218 (SOLD)

THE PLANT ORIGINATES FROM THE ASSETS OF A WALLPAPER PAVER FOR VINYL TREE WALLPAPER OR FLAT VINYL WALLPAPER.
IT IS PART OF A COMPLETE WALLPAPER MANUFACTURING LINE UP 2011
HAS PRODUCED. THE FACILITY WAS CLOSED DUE TO THE MARKET DEVELOPMENT. SOME COMPONENTS ARE RECYCLABLE.

TECHNICAL DATA:
MANUFACTURER: DRAIS
NAME: COLOR MIXING CONTAINER MIXING TANK AGITATOR CONTAINER
YEAR OF CONSTR.: PROBABLY IN 1985
MATERIAL: STEEL SHEET
DIAMETER: 100 CM
HEIGHT: 90 CM (ABOUT EVERYTHING)
WEIGHT: ESTIMATED 150 KG

2 UNITS AVAILABLE

OTHER CONTAINERS FOR 300, 100, 60 LITER AVAILABLE (60 L IN STAINLESS STEEL)

FURTHERMORE WE OFFER:

-TRUCK IVECO EUROCARGO 75E16/P WITH LIFTGATE DEREGISTERED 245000 KM
-GRUNDFOS MAGNA 65-60 F 340 MM ENERGIESPARPUMPE / CIRCULATION PUMP WITH SHUT-OFF VALVE
-ECCENTRIC PRESS AMBOLD TO EDSP 55, PRESSING FORCE 55 MP THICKNESS UP TO 4, 5 MM
-ECCENTRIC PRESS HAMILTON 40SKR, PRESSING FORCE: 40 T
-GRUNDFOS UPS 65-120/2F 340 MM PUMP ~ 3 400V 850-1150W WITH.
-CROSS TRAVERSE MKF WITH ADJUSTABLE HOOK 1200 KG D = 500-1400 MM
-BELIMO NF24A-S2 SPRING RETURN ACTUATOR, DAMPER ACTUATOR, ON-OFF, AC/DC 24 V, 10 NM, WITH 2 INTEGRATED AUXILIARY CONTACTS
-DAMPER TRO
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Ubicación: Land-faceplate diameter:1600 mm<br/>swing diameter:2000 mm<br/>turning height:1350 mm<br/>max. turning diameter:1800 mm<br/>weight of tools max.:8000 kg<br/>spindle drive:37/45 kw<br/>weight of the machine ca.:35 t<br/>face plate: <br/>auto lubrication system: <br/>oil-coolant separator: <br/>fully enclosed: <br/>ce-design: <br/>automatic tool changer:12-fach <br/>auto gear change system: <br/>chip conveyor: <br/>: <br/>ce-design: <br/><br/>standard accessories:  chips conveyor & coolant tank oil/water separator machine cover (high guarding) heat exchanger for electrical cabinet auto lubrication in guide way 4 jaw manual chuck 1000mm hydraulic unit bt50 tool connection in ram metal frame and case in machine shipment packing(wooden packing with metal base) 3 colors warning tower light chamber light anti- dropping in z axis -- auto motor brake system  installed options:  air conditioner for electrical box coolant through spindle filter of coolant water ce mark transformer FACEPLATE DIAMETER:1600 MM
SWING DIAMETER:2000 MM
TURNING HEIGHT:1350 MM
MAX. TURNING DIAMETER:1800 MM
WEIGHT OF TOOLS MAX.:8000 KG
SPINDLE DRIVE:37/45 KW
WEIGHT OF THE MACHINE CA.:35 T
FACE PLATE:
AUTO LUBRICATION SYSTEM:
OIL-COOLANT SEPARATOR:
FULLY ENCLOSED:
CE-DESIGN:
AUTOMATIC TOOL CHANGER:12-FACH
AUTO GEAR CHANGE SYSTEM:
CHIP CONVEYOR:
:
CE-DESIGN:

STANDARD ACCESSORIES: CHIPS CONVEYOR & COOLANT TANK OIL/WATER SEPARATOR MACHINE COVER (HIGH GUARDING) HEAT EXCHANGER FOR ELECTRICAL CABINET AUTO LUBRICATION IN GUIDE WAY 4 JAW MANUAL CHUCK 1000MM HYDRAULIC UNIT BT50 TOOL CONNECTION IN RAM METAL FRAME AND CASE IN MACHINE SHIPMENT PACKING(WOODEN PACKING WITH METAL BASE) 3 COLORS WARNING TOWER LIGHT CHAMBER LIGHT ANTI- DROPPING IN Z AXIS -- AUTO MOTOR BRAKE SYSTEM INSTALLED OPTIONS: AIR CONDITIONER FOR ELECTRICAL BOX COOLANT THROUGH SPINDLE FILTER OF COOLANT WATER CE MARK TRANSFORMER
Vendedor: GK Werkzeugmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MARK types: