395 ofertas

Año de construcción: usado
Precio: 1.990 €
Ubicación: Land-table saw ortza se-150 t sliding table 1600 mm
schiebetischanschlag disassembled
with suva protection
saw blades up to 45 â° degree angle-adjustable
subsequently mounted special stop vintage 2003 bã¶sch bazenheid
total size: 1600 x 1250 mm x 1700 mm
weight approx. 770 kg
built in 1974

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12        TABLE SAW ORTZA SE-150 T SLIDING TABLE 1600 MM SCHIEBETISCHANSCHLAG DISASSEMBLED WITH SUVA PROTECTION SAW BLADES UP TO 45 ° DEGREE ANGLE-ADJUSTABLE SUBSEQUENTLY MOUNTED SPECIAL STOP VINTAGE 2003 BöSCH BAZENHEID TOTAL SIZE: 1600 X 1250 MM X 1700 MM WEIGHT APPROX. 770 KG BUILT IN 1974 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-electrical spindle drive<br/>min/max furniture length: 28 cm / 2m50<br/>min/max furniture height: 35 cm /1m40<br/>min/max furniture width: 30 / 80 cm<br/>working height: 30 cm<br/>pressure horizontal and vertical: 15 to 25 kn<br/>2 speeds: 25 and 50 mm/s<br/>total power installed: 4 kw ELECTRICAL SPINDLE DRIVE
MIN/MAX FURNITURE LENGTH: 28 CM / 2M50
MIN/MAX FURNITURE HEIGHT: 35 CM /1M40
MIN/MAX FURNITURE WIDTH: 30 / 80 CM
WORKING HEIGHT: 30 CM
PRESSURE HORIZONTAL AND VERTICAL: 15 TO 25 KN
2 SPEEDS: 25 AND 50 MM/S
TOTAL POWER INSTALLED: 4 KW
Vendedor: Vebim
Año de construcción: usado
Precio: 1.490 €
Ubicación: Land-kehl machine / milling machine rex

with suva protection
machine wheels
length: 1100 mm, width 950 mm, height 1900 mm
weight approx. 580 kg
year of construction 1983

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12        KEHL MACHINE / MILLING MACHINE REX WITH SUVA PROTECTION MACHINE WHEELS LENGTH: 1100 MM, WIDTH 950 MM, HEIGHT 1900 MM WEIGHT APPROX. 580 KG YEAR OF CONSTRUCTION 1983 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 360 kg<br/>dimensions (l x w x h) approx.: 980 x 1250 x 1610 mm<br/>description: <b>3-spindle copy router for aluminium<br> serial number: 1780021507<br> top group:<br> milling area on abutments and copying template 340 x 100 mm<br> stroke 110 mm<br> group low:<br> milling area on abutments and copying template 240 x 85 mm<br> front stroke 95 mm rear stroke 45 mm<br> spindle speed: 12000 rpm<br> cutting area of profiles: 115 x 100 mm<br> electrical connection 230 / 400v<br> 50hz<br> engine power: 0.74kw<br> 7 bar compressed air connection<br> air consumption per cycle: 12 l without spraying<br> 24 l with spraying. </b> WEIGHT APPROX.: 360 KG
DIMENSIONS (L X W X H) APPROX.: 980 X 1250 X 1610 MM
DESCRIPTION: 3-SPINDLE COPY ROUTER FOR ALUMINIUM
SERIAL NUMBER: 1780021507
TOP GROUP:
MILLING AREA ON ABUTMENTS AND COPYING TEMPLATE 340 X 100 MM
STROKE 110 MM
GROUP LOW:
MILLING AREA ON ABUTMENTS AND COPYING TEMPLATE 240 X 85 MM
FRONT STROKE 95 MM REAR STROKE 45 MM
SPINDLE SPEED: 12000 RPM
CUTTING AREA OF PROFILES: 115 X 100 MM
ELECTRICAL CONNECTION 230 / 400V
50HZ
ENGINE POWER: 0.74KW
7 BAR COMPRESSED AIR CONNECTION
AIR CONSUMPTION PER CYCLE: 12 L WITHOUT SPRAYING
24 L WITH SPRAYING.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 370 €
Ubicación: Land-table belt sander

grinding table 1800 x 850 mm
total size: length 3200 mm, width 1200 mm, height 1700 mm
weight 690 kg
built in 1972

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 

 TABLE BELT SANDER GRINDING TABLE 1800 X 850 MM TOTAL SIZE: LENGTH 3200 MM, WIDTH 1200 MM, HEIGHT 1700 MM WEIGHT 690 KG BUILT IN 1972 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: ligmatech, type: tranportband, year: ca.2008, working length mm: 6000, working widht mm: 800, total hight mm: 820, engine power kw: 0,75, feeding speed max m/min: 16-25, working hight adjustable mm: yes, year :ca.2008 MANUFACTURER: LIGMATECH, TYPE: TRANPORTBAND, YEAR: CA.2008, WORKING LENGTH MM: 6000, WORKING WIDHT MM: 800, TOTAL HIGHT MM: 820, ENGINE POWER KW: 0,75, FEEDING SPEED MAX M/MIN: 16-25, WORKING HIGHT ADJUSTABLE MM: YES, YEAR :CA.2008
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: 1.690 €
Ubicación: Land-planer - thicknesser leya rauschenbach comb.

planing width 500 mm
combined machine also as saws or fillet/milling machine can be used
with feed
l x w x h: 1750 x 1050 x 1700 mm
weight approx. 1200 kg
built in 1959

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 

 PLANER - THICKNESSER LEYA RAUSCHENBACH COMB. PLANING WIDTH 500 MM COMBINED MACHINE ALSO AS SAWS OR FILLET/MILLING MACHINE CAN BE USED WITH FEED L X W X H: 1750 X 1050 X 1700 MM WEIGHT APPROX. 1200 KG BUILT IN 1959 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 29.900 €
Ubicación: Land-weight approx.: 3000 kg<br/>dimensions (l x w x h) approx.: 6260 x 950 x 1750 mm<br/>gluing unit: yes <br/>profile scraping unit: yes <br/>description: <h3>brandt, type ambition 1660 fc airtech</h3> - spread milling unit 2 x 2.2 kw, 200 hz<br> - glue aggregate<br> - cutting unit phase / right 2 x 0.35 kw<br> - milling unit 2 x 0.55 kw counterflow<br> - forming mill unit 4 x 0.3 kw wd 60<br> - profile scraping with quick change heads<br> - cleaning unit 2 engines<br> - electronic control power control pc20 + - extension walk-in ruler with 300 mm<br> - pu rolls instead of standard rolls 1600 - 1800<br> - interior lighting hood 3 lamps<br> - workpiece support shear version<br> - interface ligmatech zhr05 for 1600/1800<br> - motor height adjustment top pressure<br> - program relocation walk-in ruler<br> - program displacement pressure zone<br> - quickmelt application unit<br> - automatic edge insertion kdx 1210/1400<br> - automation package for machines with 1 milling unit<br> - pneumatic adjustment hoods phase / straight<br> - pneumatic adjustment of face milling<br> - program adjustment lateral feeler rollers<br> - pneumatic 2-point vertical vertical feeler roller<br> - pneumatic 2-point adjustment<br> - tool set r = 2 mm<br> - glue scrapers<br> - powertouch 2<br> - airtec - activation unit at 15<br> WEIGHT APPROX.: 3000 KG
DIMENSIONS (L X W X H) APPROX.: 6260 X 950 X 1750 MM
GLUING UNIT: YES
PROFILE SCRAPING UNIT: YES
DESCRIPTION:

BRANDT, TYPE AMBITION 1660 FC AIRTECH

- SPREAD MILLING UNIT 2 X 2.2 KW, 200 HZ
- GLUE AGGREGATE
- CUTTING UNIT PHASE / RIGHT 2 X 0.35 KW
- MILLING UNIT 2 X 0.55 KW COUNTERFLOW
- FORMING MILL UNIT 4 X 0.3 KW WD 60
- PROFILE SCRAPING WITH QUICK CHANGE HEADS
- CLEANING UNIT 2 ENGINES
- ELECTRONIC CONTROL POWER CONTROL PC20 + - EXTENSION WALK-IN RULER WITH 300 MM
- PU ROLLS INSTEAD OF STANDARD ROLLS 1600 - 1800
- INTERIOR LIGHTING HOOD 3 LAMPS
- WORKPIECE SUPPORT SHEAR VERSION
- INTERFACE LIGMATECH ZHR05 FOR 1600/1800
- MOTOR HEIGHT ADJUSTMENT TOP PRESSURE
- PROGRAM RELOCATION WALK-IN RULER
- PROGRAM DISPLACEMENT PRESSURE ZONE
- QUICKMELT APPLICATION UNIT
- AUTOMATIC EDGE INSERTION KDX 1210/1400
- AUTOMATION PACKAGE FOR MACHINES WITH 1 MILLING UNIT
- PNEUMATIC ADJUSTMENT HOODS PHASE / STRAIGHT
- PNEUMATIC ADJUSTMENT OF FACE MILLING
- PROGRAM ADJUSTMENT LATERAL FEELER ROLLERS
- PNEUMATIC 2-POINT VERTICAL VERTICAL FEELER ROLLER
- PNEUMATIC 2-POINT ADJUSTMENT
- TOOL SET R = 2 MM
- GLUE SCRAPERS
- POWERTOUCH 2
- AIRTEC - ACTIVATION UNIT AT 15
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 620 €
Ubicación: Land-design and drilling machine series vitap length 1200 mm, width 900 mm, height 1600 mm
2 x 27 piece spindles
stop with 2 extensions for series hole
machine wheels
weight 450 kg
length mm, width 900 mm, height 1200 1600 mm
built in 1994

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 


 DESIGN AND DRILLING MACHINE SERIES VITAP LENGTH 1200 MM, WIDTH 900 MM, HEIGHT 1600 MM 2 X 27 PIECE SPINDLES STOP WITH 2 EXTENSIONS FOR SERIES HOLE MACHINE WHEELS WEIGHT 450 KG LENGTH MM, WIDTH 900 MM, HEIGHT 1200 1600 MM BUILT IN 1994 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 650 €
Ubicación: Land-weight approx.: 400 kg<br/>dimensions (l x w x h) approx.: 3000 x 1700 x 1800 mm<br/>description: return conveyour for edgebanding machines WEIGHT APPROX.: 400 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 1700 X 1800 MM
DESCRIPTION: RETURN CONVEYOUR FOR EDGEBANDING MACHINES
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.890 €
Ubicación: Land-edge glue machine fravol rapid / r 4

to glue thickness max mm: 15 to glue height max mm: 65 thickness of rolling material max mm: 3 workpiece length min mm: 60 feed max m/min: 16 feed continuously variable: yes glue system granules: glue basin below caps saw unit: 2 motors flush/radius/chamfer stations: 2 strip magazine: yes a performing: legal machine ce mark: yes total connection kw: 12.70 weight ca. 1225 kg
length: 3200 mm, width 1000 mm, height 1700 mm
built in 1999

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 


 EDGE GLUE MACHINE FRAVOL RAPID / R 4 TO GLUE THICKNESS MAX MM: 15 TO GLUE HEIGHT MAX MM: 65 THICKNESS OF ROLLING MATERIAL MAX MM: 3 WORKPIECE LENGTH MIN MM: 60 FEED MAX M/MIN: 16 FEED CONTINUOUSLY VARIABLE: YES GLUE SYSTEM GRANULES: GLUE BASIN BELOW CAPS SAW UNIT: 2 MOTORS FLUSH/RADIUS/CHAMFER STATIONS: 2 STRIP MAGAZINE: YES A PERFORMING: LEGAL MACHINE CE MARK: YES TOTAL CONNECTION KW: 12.70 WEIGHT CA. 1225 KG LENGTH: 3200 MM, WIDTH 1000 MM, HEIGHT 1700 MM BUILT IN 1999 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-almatec diaphragma pump; used - good ALMATEC DIAPHRAGMA PUMP; USED - GOOD
Vendedor: Tipp Umwelt- und Verfahrenstechnik GmbH
Año de construcción: usado
Ubicación: Land-technical data:
	 
-saw blade diameter 420 mm
-blade hole 30 mm
-max cutting length 6000 mm
-smallest cutting length 90â° + 45 â° 335 mm
-see diagram below cutting area
-swivel range to inside pneumatic 90-22.5 â° - tilt range inside pneumatically 90 - 45 â°
-blade rotation speed 2800 rpm
-drive: 400 v / 2 x 4000 watts
-compressed air supply 7 bar
-air consumption per work cycle - no spray approx.	    	    40 l
						-with spray approx.	    64 l
	-space requirement approx.	   	  b h 7500 x 1600 x 1600 mm
-weight approx.						1800 kg
-by: - cutting-length adjustment with position control - saw unit swivel and tilt for high and wide profiles,.
			-as well as miter cuts possible, 22.5 â° to the inside pivot, - a separate electrical cabinet, - oil lubrication
 TECHNICAL DATA: -SAW BLADE DIAMETER 420 MM -BLADE HOLE 30 MM -MAX CUTTING LENGTH 6000 MM -SMALLEST CUTTING LENGTH 90&ACIRC;&DEG; + 45 &ACIRC;&DEG; 335 MM -SEE DIAGRAM BELOW CUTTING AREA -SWIVEL RANGE TO INSIDE PNEUMATIC 90-22.5 &ACIRC;&DEG; - TILT RANGE INSIDE PNEUMATICALLY 90 - 45 &ACIRC;&DEG; -BLADE ROTATION SPEED 2800 RPM -DRIVE: 400 V / 2 X 4000 WATTS -COMPRESSED AIR SUPPLY 7 BAR -AIR CONSUMPTION PER WORK CYCLE - NO SPRAY APPROX. 40 L -WITH SPRAY APPROX. 64 L -SPACE REQUIREMENT APPROX. B H 7500 X 1600 X 1600 MM -WEIGHT APPROX. 1800 KG -BY: - CUTTING-LENGTH ADJUSTMENT WITH POSITION CONTROL - SAW UNIT SWIVEL AND TILT FOR HIGH AND WIDE PROFILES,. -AS WELL AS MITER CUTS POSSIBLE, 22.5 &ACIRC;&DEG; TO THE INSIDE PIVOT, - A SEPARATE ELECTRICAL CABINET, - OIL LUBRICATION
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-diaphragm pump; used - good DIAPHRAGM PUMP; USED - GOOD
Vendedor: Tipp Umwelt- und Verfahrenstechnik GmbH
Año de construcción: usado
Precio: 17.300 €
Ubicación: Land-panel saw striebig compact 6207 vertical

little used
section 5350 x 2070 x 60 mm
saw blade 250 mm, score, 48 teeth
before scoring saw unit continuously
dig. measuring system, y-axis
built in 2008

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 

 PANEL SAW STRIEBIG COMPACT 6207 VERTICAL LITTLE USED SECTION 5350 X 2070 X 60 MM SAW BLADE 250 MM, SCORE, 48 TEETH BEFORE SCORING SAW UNIT CONTINUOUSLY DIG. MEASURING SYSTEM, Y-AXIS BUILT IN 2008 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-diaphragm pump; used - good DIAPHRAGM PUMP; USED - GOOD
Vendedor: Tipp Umwelt- und Verfahrenstechnik GmbH
Año de construcción: usado
Precio: 4.950 €
Ubicación: Land-combined saw, milling machine -, planing, drilling machine

planing width 310 mm
cutting length 865 mm
shaper fence for tool 㸠max 220 mm
built in 2008
weight 450 kg
l x w x h: 1.8 x 1.3 x 1.5 m

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 
 COMBINED SAW, MILLING MACHINE -, PLANING, DRILLING MACHINE PLANING WIDTH 310 MM CUTTING LENGTH 865 MM SHAPER FENCE FOR TOOL &ATILDE;&CEDIL; MAX 220 MM BUILT IN 2008 WEIGHT 450 KG L X W X H: 1.8 X 1.3 X 1.5 M THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 19.200 €
Ubicación: Land-weight approx.: 3500 kg<br/>dimensions (l x w x h) approx.: 5000 x 2300 x 2100 mm<br/>description: position 1 - type: transfer - brand: ligmatech  position 2 - type: packing-wrapping machine - brand: ligmatech - model: vkc 100   useful working width 200 - 1000 mm   min. / max. working thickness 50 / 200 mm   useful working length: 500 / 2500 mm norm and optional for the security   security norme ce mark  pinomatic not included WEIGHT APPROX.: 3500 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 2300 X 2100 MM
DESCRIPTION: POSITION 1 - TYPE: TRANSFER - BRAND: LIGMATECH POSITION 2 - TYPE: PACKING-WRAPPING MACHINE - BRAND: LIGMATECH - MODEL: VKC 100 USEFUL WORKING WIDTH 200 - 1000 MM MIN. / MAX. WORKING THICKNESS 50 / 200 MM USEFUL WORKING LENGTH: 500 / 2500 MM NORM AND OPTIONAL FOR THE SECURITY SECURITY NORME CE MARK PINOMATIC NOT INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 690 €
Ubicación: Land-mounting help device blum box fixed m

masch. no. la 00399
weight approx. 30 kg
l x w x h: 2.0 x 0.5 x 1.0 m
built in 2006

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 


 MOUNTING HELP DEVICE BLUM BOX FIXED M MASCH. NO. LA 00399 WEIGHT APPROX. 30 KG L X W X H: 2.0 X 0.5 X 1.0 M BUILT IN 2006 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 19.800 €
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 5300 x 2300 x 3150 mm<br/>description: max. machining length 2500 mm, max. machining width 600 mm, max. working height 1300 mm, min. working height 250 mm, control system homatic nc 21, safety standard ce mark WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 5300 X 2300 X 3150 MM
DESCRIPTION: MAX. MACHINING LENGTH 2500 MM, MAX. MACHINING WIDTH 600 MM, MAX. WORKING HEIGHT 1300 MM, MIN. WORKING HEIGHT 250 MM, CONTROL SYSTEM HOMATIC NC 21, SAFETY STANDARD CE MARK
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.380 €
Ubicación: Land-slot boring machine schelling bm 2

drilling depth of 150 mm
height of 190 mm
sideways (transverse adjustment) 300 mm
table size l x w 660 x 320 mm quick-clamping device for drill ã? 1-20 mm
motor output 1,5 kw
motor 1,1 kw
spindle speeds 2000 or 4000 rpm spindle speeds 3000/ 6000 rpm drill depth scale drill elevation scale working height 880 mm
dimensions w x d x h 700 x 800 x 1300 mm
weight ca. 280 kg
built in 1992

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 
 SLOT BORING MACHINE SCHELLING BM 2 DRILLING DEPTH OF 150 MM HEIGHT OF 190 MM SIDEWAYS (TRANSVERSE ADJUSTMENT) 300 MM TABLE SIZE L X W 660 X 320 MM QUICK-CLAMPING DEVICE FOR DRILL &ATILDE;? 1-20 MM MOTOR OUTPUT 1,5 KW MOTOR 1,1 KW SPINDLE SPEEDS 2000 OR 4000 RPM SPINDLE SPEEDS 3000/ 6000 RPM DRILL DEPTH SCALE DRILL ELEVATION SCALE WORKING HEIGHT 880 MM DIMENSIONS W X D X H 700 X 800 X 1300 MM WEIGHT CA. 280 KG BUILT IN 1992 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 23.000 €
Ubicación: Land-m machine type machining center - universal make matec type 30 l year 1996 control type cnc storage switzerland origin state of baden - wã¼rttemberg delivery time upon request of freight basis exw p
technical details

x trail 2000 mm y way 420 mm z trail 500 mm control heidenhain tnc 407 table dimensions 2500 x 630 mm slot number 7 t-18 h8 grooves 100 mm speed range mm t - slot distance 6000 rpm power at 40% / 100% ed 30 / 17 kw torque at 40% / 100% ed 190 / 120 nm  
feed x/y/z 30 m/min tool length of 350 mm max tool weight of max 10 kg tool diameter 70 mm tool diameter with free nebenpl. 130 mm tool holder sk 40 tool magazine with 36 seats total power 45 kw machine weight 10 tons of space requirement approx. 5 x 2.7 x 3 m additional information

electronic handwheel, chip conveyor,
 sk 40 6000 rpm
 8 schraubtsoeke arnold and werzeughalter sk 40
 good machine
 M MACHINE TYPE MACHINING CENTER - UNIVERSAL MAKE MATEC TYPE 30 L YEAR 1996 CONTROL TYPE CNC STORAGE SWITZERLAND ORIGIN STATE OF BADEN - W&ATILDE;&FRAC14;RTTEMBERG DELIVERY TIME UPON REQUEST OF FREIGHT BASIS EXW P TECHNICAL DETAILS X TRAIL 2000 MM Y WAY 420 MM Z TRAIL 500 MM CONTROL HEIDENHAIN TNC 407 TABLE DIMENSIONS 2500 X 630 MM SLOT NUMBER 7 T-18 H8 GROOVES 100 MM SPEED RANGE MM T - SLOT DISTANCE 6000 RPM POWER AT 40% / 100% ED 30 / 17 KW TORQUE AT 40% / 100% ED 190 / 120 NM FEED X/Y/Z 30 M/MIN TOOL LENGTH OF 350 MM MAX TOOL WEIGHT OF MAX 10 KG TOOL DIAMETER 70 MM TOOL DIAMETER WITH FREE NEBENPL. 130 MM TOOL HOLDER SK 40 TOOL MAGAZINE WITH 36 SEATS TOTAL POWER 45 KW MACHINE WEIGHT 10 TONS OF SPACE REQUIREMENT APPROX. 5 X 2.7 X 3 M ADDITIONAL INFORMATION ELECTRONIC HANDWHEEL, CHIP CONVEYOR, SK 40 6000 RPM 8 SCHRAUBTSOEKE ARNOLD AND WERZEUGHALTER SK 40 GOOD MACHINE
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: used machinery auction RESALE 12.000 €
Ubicación: Land-with clamping table, 1200 x 500 mm, m. t slots: 18 mm, base travel: 600 mm, spindle mk4, speed circuit for 18 speeds, thread cutter, three-jaw chuck, coolant system, digital drill depth indicator, diameter: 250 mm, pneumatic controlled, fabr. rã¶hm, and pneumatically controlled three-jaw chuck, diameter: 400 mm, fabr. fibro, the machine is refurbished WITH CLAMPING TABLE, 1200 X 500 MM, M. T SLOTS: 18 MM, BASE TRAVEL: 600 MM, SPINDLE MK4, SPEED CIRCUIT FOR 18 SPEEDS, THREAD CUTTER, THREE-JAW CHUCK, COOLANT SYSTEM, DIGITAL DRILL DEPTH INDICATOR, DIAMETER: 250 MM, PNEUMATIC CONTROLLED, FABR. R&ATILDE;&PARA;HM, AND PNEUMATICALLY CONTROLLED THREE-JAW CHUCK, DIAMETER: 400 MM, FABR. FIBRO, THE MACHINE IS REFURBISHED
Vendedor: Indutax GmbH
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-x-travel: 3000mm, y-travel: 800mm, z-travel: 800mm, hotizontal/ vertical working space: 2x 1000/ 2x 1220mm, horizontal/ vertical spindle table distance: 150-950/ 0-700mm, rotational speed: 20-9000/min, tool cone: sk 40, number of tool slots: 60, controls: heidenhain 546, length: 5500mm, width: 4020mm, height: 3190mm, weight: 19t, including chip conveyor.  X-TRAVEL: 3000MM, Y-TRAVEL: 800MM, Z-TRAVEL: 800MM, HOTIZONTAL/ VERTICAL WORKING SPACE: 2X 1000/ 2X 1220MM, HORIZONTAL/ VERTICAL SPINDLE TABLE DISTANCE: 150-950/ 0-700MM, ROTATIONAL SPEED: 20-9000/MIN, TOOL CONE: SK 40, NUMBER OF TOOL SLOTS: 60, CONTROLS: HEIDENHAIN 546, LENGTH: 5500MM, WIDTH: 4020MM, HEIGHT: 3190MM, WEIGHT: 19T, INCLUDING CHIP CONVEYOR.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 1600 x 1100 x 2400 mm<br/>description: rotating suction arm with three joints WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1600 X 1100 X 2400 MM
DESCRIPTION: ROTATING SUCTION ARM WITH THREE JOINTS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 690 €
Ubicación: Land-under table saw wadkin

cutting width 300 mm
cutting height 80 mm
pneumatically raised
with rolling table and stop l 2.0 m
l x w x h: 2.5 x 0.8 x 1.1 m
weight approx. 480 kg
built in 1975

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      
   
 UNDER TABLE SAW WADKIN CUTTING WIDTH 300 MM CUTTING HEIGHT 80 MM PNEUMATICALLY RAISED WITH ROLLING TABLE AND STOP L 2.0 M L X W X H: 2.5 X 0.8 X 1.1 M WEIGHT APPROX. 480 KG BUILT IN 1975 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-x travel:   4000 mm<br/>y travel:    800 mm<br/>z travel:    500 mm<br/>--------------------------------------------------:  <br/>working range -cubic-:  <br/>- x-axis travel:   4000 mm<br/>- y-axis travel:    800 mm<br/>- z-axis travel:    500 mm<br/>milling spindle / head:  <br/>- tool fixture: iso sk 40:        <br/>- spindle revolutions (max):  15000 /min<br/>tool magazine:  <br/>- number of positions:     48  <br/>electrical specifications:  <br/>- total power consumption:     70 kw<br/>- mains power supply:     65 kva<br/>- mains voltage:    400 v<br/>- mains frequency:     50 hz<br/>dimensions / weights:  <br/>- total weight approx.:  21000 kg<br/>attachments:  <br/>- central lubrication system: yes:        <br/>- chip conveyor: yes:        <br/>- through spindle coolant attachment: yes:        <br/>- closed cabin: yes:        <br/><br/><br/><br/><br/> X TRAVEL: 4000 MM
Y TRAVEL: 800 MM
Z TRAVEL: 500 MM
--------------------------------------------------:
WORKING RANGE -CUBIC-:
- X-AXIS TRAVEL: 4000 MM
- Y-AXIS TRAVEL: 800 MM
- Z-AXIS TRAVEL: 500 MM
MILLING SPINDLE / HEAD:
- TOOL FIXTURE: ISO SK 40:
- SPINDLE REVOLUTIONS (MAX): 15000 /MIN
TOOL MAGAZINE:
- NUMBER OF POSITIONS: 48
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 70 KW
- MAINS POWER SUPPLY: 65 KVA
- MAINS VOLTAGE: 400 V
- MAINS FREQUENCY: 50 HZ
DIMENSIONS / WEIGHTS:
- TOTAL WEIGHT APPROX.: 21000 KG
ATTACHMENTS:
- CENTRAL LUBRICATION SYSTEM: YES:
- CHIP CONVEYOR: YES:
- THROUGH SPINDLE COOLANT ATTACHMENT: YES:
- CLOSED CABIN: YES:




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Precio: 490 €
Ubicación: Land-vacuum pump rietschle clfe 61v (02)

suction capacity 60 m3 / h
final pressure 10 bar
motor 2,2 kw
year of construction 1989
l x w x h: 80 x 50 x 40 cm
weight approx. 50 kg

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      





 VACUUM PUMP RIETSCHLE CLFE 61V (02) SUCTION CAPACITY 60 M3 / H FINAL PRESSURE 10 BAR MOTOR 2,2 KW YEAR OF CONSTRUCTION 1989 L X W X H: 80 X 50 X 40 CM WEIGHT APPROX. 50 KG THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-working range -milling-: <br/>.. x-axis travel:2500 mm<br/>.. y-axis travel:2000 mm<br/>.. z-axis travel:800 mm<br/>.. number of controlled axes:3 <br/>tool changer:24-fach <br/>tool taper:sk 40 <br/>.. spindle revolutions (max):20-15000 1/min<br/>.. torque (max.):100 nm<br/>.. drive power (max):15 kw<br/>rapid motion - x-axis:20.000 mm/min<br/>rapid motion - y-axis:20.000 mm/min<br/>rapid traverse z-axis:15.000 mm/min<br/>floor space required (w/o switchgear cabinet):4,5 x 4,0 x 2,9 m<br/>weight of the machine ca.:27,0 t<br/><br/>gantry type machining center, table   3000 mm x 2500 mm, lan interface, min. distance spindle nose - table: 100mm, daylight 700mm, electr. handwheel heidenhain hr 410 air blast and minimum quantity lubrication,  working hours   appr.  57.276 h   ( main switch on )                           appr.  29.067  h   ( control running  on )  WORKING RANGE -MILLING-:
.. X-AXIS TRAVEL:2500 MM
.. Y-AXIS TRAVEL:2000 MM
.. Z-AXIS TRAVEL:800 MM
.. NUMBER OF CONTROLLED AXES:3
TOOL CHANGER:24-FACH
TOOL TAPER:SK 40
.. SPINDLE REVOLUTIONS (MAX):20-15000 1/MIN
.. TORQUE (MAX.):100 NM
.. DRIVE POWER (MAX):15 KW
RAPID MOTION - X-AXIS:20.000 MM/MIN
RAPID MOTION - Y-AXIS:20.000 MM/MIN
RAPID TRAVERSE Z-AXIS:15.000 MM/MIN
FLOOR SPACE REQUIRED (W/O SWITCHGEAR CABINET):4,5 X 4,0 X 2,9 M
WEIGHT OF THE MACHINE CA.:27,0 T

GANTRY TYPE MACHINING CENTER, TABLE 3000 MM X 2500 MM, LAN INTERFACE, MIN. DISTANCE SPINDLE NOSE - TABLE: 100MM, DAYLIGHT 700MM, ELECTR. HANDWHEEL HEIDENHAIN HR 410 AIR BLAST AND MINIMUM QUANTITY LUBRICATION, WORKING HOURS APPR. 57.276 H ( MAIN SWITCH ON ) APPR. 29.067 H ( CONTROL RUNNING ON )
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 590 €
Ubicación: Land-table belt sanding machine samco sac

built in 1985
weight 350 kg
l x w x h: 400 x 180 x 170 cm

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      


 TABLE BELT SANDING MACHINE SAMCO SAC BUILT IN 1985 WEIGHT 350 KG L X W X H: 400 X 180 X 170 CM THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-conveyor belt (4 pieces)\r\nmake: ligmatech\r\nyear: 1999\r\n\r\n2x with motor\r\nmotor: (1x 0,55 kw & 1x 0,7 kw)\r\nlength: 2,45 m\r\nwidth (belt): 65 cm\r\nwidth (table): 80 cm\r\n\r\n1 x with motor (0,75kw) \r\nlength: 5 m\r\nwidth (belt): 65 cm\r\nwidth (table): 80 cm\r\n\r\n(1 x perhaps with motor (0,75kw) missing pulley\r\nlength: 5 m\r\nwidth (belt): 65 cm\r\nwidth (table): 80 cm)\r\n\r\nthe conveyor height is adjustable from approx. 70 - 100 cm.\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. data are for information and are not binding. CONVEYOR BELT (4 PIECES)\R\NMAKE: LIGMATECH\R\NYEAR: 1999\R\N\R\N2X WITH MOTOR\R\NMOTOR: (1X 0,55 KW & 1X 0,7 KW)\R\NLENGTH: 2,45 M\R\NWIDTH (BELT): 65 CM\R\NWIDTH (TABLE): 80 CM\R\N\R\N1 X WITH MOTOR (0,75KW) \R\NLENGTH: 5 M\R\NWIDTH (BELT): 65 CM\R\NWIDTH (TABLE): 80 CM\R\N\R\N(1 X PERHAPS WITH MOTOR (0,75KW) MISSING PULLEY\R\NLENGTH: 5 M\R\NWIDTH (BELT): 65 CM\R\NWIDTH (TABLE): 80 CM)\R\N\R\NTHE CONVEYOR HEIGHT IS ADJUSTABLE FROM APPROX. 70 - 100 CM.\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATA ARE FOR INFORMATION AND ARE NOT BINDING.
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 590 €
Ubicación: Land-bandsaw olma

roll 㸠800 mm
l x w x h: 1.3 x 1.0 x 2.4 m
weight approx. 9502 kg
built in 1958

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      

 BANDSAW OLMA ROLL &ATILDE;&CEDIL; 800 MM L X W X H: 1.3 X 1.0 X 2.4 M WEIGHT APPROX. 9502 KG BUILT IN 1958 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: 12.500 €
Ubicación: Land-single sided egde banding machine\r\nbrand: brandt\r\ntype: kd 99 f\r\nyear: 1999\r\n\r\nwith ligmatech workpiece return type: zhr 15\r\n\r\ntechnical data:\r\n\r\nelectrical interface ligmatech zhr 15\r\n\r\nv-belt top up to 1500 mm (installing) length\r\n\r\ninfeed fence adjustable\r\n\r\nspecial infeed fence for the process of laminate overhangs\r\nmin. workpiece thickness: 16 mm\r\nmax. laminate overhang: 5 mm\r\n\r\nprogram controlled adjustment infeed fence\r\n\r\nprogram controlled adjustment pressure zone\r\n\r\npre-milling unit 2 x 3,0 kw 200 hz\r\n\r\ngluing unit qa 34 quickmelt (changable)\r\n\r\nend trimming unit hl 83 chamfer / straight\r\nmax. cross-section 900 mm2\r\nmax. 45 mm x 20 mm\r\n\r\nrough milling unit 2x1,5 kw 0 degrees\r\n\r\nmilling unit 2 x 0,55 kw 0 - 25 degrees\r\nnote: version as multi-step unit incl. program controlled 6-axes-adjustment and multi-step tools r=2 mm / r=3 mm / chamfer\r\n\r\ncontour trimmng unit top / bottom 4 x 0,3 kw\r\n\r\nscraping unit for pvc edges\r\n\r\nflat scraping unit glued joint\r\n\r\nbuffing unit oscillating with insert control\r\n\r\nnc 21-kompakt\r\n\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding.\r\n\r\n SINGLE SIDED EGDE BANDING MACHINE\R\NBRAND: BRANDT\R\NTYPE: KD 99 F\R\NYEAR: 1999\R\N\R\NWITH LIGMATECH WORKPIECE RETURN TYPE: ZHR 15\R\N\R\NTECHNICAL DATA:\R\N\R\NELECTRICAL INTERFACE LIGMATECH ZHR 15\R\N\R\NV-BELT TOP UP TO 1500 MM (INSTALLING) LENGTH\R\N\R\NINFEED FENCE ADJUSTABLE\R\N\R\NSPECIAL INFEED FENCE FOR THE PROCESS OF LAMINATE OVERHANGS\R\NMIN. WORKPIECE THICKNESS: 16 MM\R\NMAX. LAMINATE OVERHANG: 5 MM\R\N\R\NPROGRAM CONTROLLED ADJUSTMENT INFEED FENCE\R\N\R\NPROGRAM CONTROLLED ADJUSTMENT PRESSURE ZONE\R\N\R\NPRE-MILLING UNIT 2 X 3,0 KW 200 HZ\R\N\R\NGLUING UNIT QA 34 QUICKMELT (CHANGABLE)\R\N\R\NEND TRIMMING UNIT HL 83 CHAMFER / STRAIGHT\R\NMAX. CROSS-SECTION 900 MM2\R\NMAX. 45 MM X 20 MM\R\N\R\NROUGH MILLING UNIT 2X1,5 KW 0 DEGREES\R\N\R\NMILLING UNIT 2 X 0,55 KW 0 - 25 DEGREES\R\NNOTE: VERSION AS MULTI-STEP UNIT INCL. PROGRAM CONTROLLED 6-AXES-ADJUSTMENT AND MULTI-STEP TOOLS R=2 MM / R=3 MM / CHAMFER\R\N\R\NCONTOUR TRIMMNG UNIT TOP / BOTTOM 4 X 0,3 KW\R\N\R\NSCRAPING UNIT FOR PVC EDGES\R\N\R\NFLAT SCRAPING UNIT GLUED JOINT\R\N\R\NBUFFING UNIT OSCILLATING WITH INSERT CONTROL\R\N\R\NNC 21-KOMPAKT\R\N\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.\R\N\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 1.990 €
Ubicación: Land-four side planer scm pvs

planing width 180 mm
planing height 120 mm
4-spindle
l x w x h: 3.5 x 1.2 x 1.5 m
year of construction 1968
weight 1065 kg

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      



 FOUR SIDE PLANER SCM PVS PLANING WIDTH 180 MM PLANING HEIGHT 120 MM 4-SPINDLE L X W X H: 3.5 X 1.2 X 1.5 M YEAR OF CONSTRUCTION 1968 WEIGHT 1065 KG THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-de Germany, 46325 Borken-Burlo
Vendedor: Peter Jüttermann Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-stock # 3228

sigmatec compact industrial pc, c-ipc 256 mb lx 800,.
mc5 needed control. STOCK # 3228 SIGMATEC COMPACT INDUSTRIAL PC, C-IPC 256 MB LX 800,. MC5 NEEDED CONTROL.
Vendedor: Pro-tech Kunststofftechnologie GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: ima, type: compact, year: 1995, min-max edge material mm: 0,5-3,0, work piece width min-max mm: 80, min.-max. workpiece length in mm: 150, min.-max. workpiece height in mm: 10-50, min-max feed m/min: ca.15, einlauflineal gesteuert: no, premilling: yes, application of separation agent: yes, ir zone: yes, coil magazine: 1, strip magazin: 1, min.-max. batten magazine mm: 1, bevel milling: yes, 2 motors: yes, radius scraper: yes, type of scraper: yes, spraying system 2: yes, bonding part eva: yes, groove milling: yes, buffing unit: yes, top pressure belt/roller: rolle, work piece refeeding: ligmatech zhr 02, year :1995 MANUFACTURER: IMA, TYPE: COMPACT, YEAR: 1995, MIN-MAX EDGE MATERIAL MM: 0,5-3,0, WORK PIECE WIDTH MIN-MAX MM: 80, MIN.-MAX. WORKPIECE LENGTH IN MM: 150, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-50, MIN-MAX FEED M/MIN: CA.15, EINLAUFLINEAL GESTEUERT: NO, PREMILLING: YES, APPLICATION OF SEPARATION AGENT: YES, IR ZONE: YES, COIL MAGAZINE: 1, STRIP MAGAZIN: 1, MIN.-MAX. BATTEN MAGAZINE MM: 1, BEVEL MILLING: YES, 2 MOTORS: YES, RADIUS SCRAPER: YES, TYPE OF SCRAPER: YES, SPRAYING SYSTEM 2: YES, BONDING PART EVA: YES, GROOVE MILLING: YES, BUFFING UNIT: YES, TOP PRESSURE BELT/ROLLER: ROLLE, WORK PIECE REFEEDING: LIGMATECH ZHR 02, YEAR :1995
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: 12.980 €
Ubicación: Land-warm air heating spanex ul/e-50 rw-02

with chips
40 kw
l x w x h: 1970 x 820 x 1570 cm
weight 530 kg
year 2012

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      


  WARM AIR HEATING SPANEX UL/E-50 RW-02 WITH CHIPS 40 KW L X W X H: 1970 X 820 X 1570 CM WEIGHT 530 KG YEAR 2012 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-durchlaufbohrmaschine nottmeyer\r\nmit ligmatech drehstapler zde uni-jet DURCHLAUFBOHRMASCHINE NOTTMEYER\R\NMIT LIGMATECH DREHSTAPLER ZDE UNI-JET
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 690 €
Ubicación: Land-hardware drill grass bbm-r

with base
with stop
l x w x h: 2.5 x 1.0 x 1.8 m
weight 350 kg
built in 1992

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      


 HARDWARE DRILL GRASS BBM-R WITH BASE WITH STOP L X W X H: 2.5 X 1.0 X 1.8 M WEIGHT 350 KG BUILT IN 1992 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-rückführung\r\nhersteller: ligmatech\r\ntyp: zhr 15/xx/re\r\nbaujahr: 1995\r\n\r\nfür rechtsmaschine\r\n RüCKFüHRUNG\R\NHERSTELLER: LIGMATECH\R\NTYP: ZHR 15/XX/RE\R\NBAUJAHR: 1995\R\N\R\NFüR RECHTSMASCHINE\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 1.790 €
Ubicación: Land-gluing press hydraulic

format l x b: 8.0 m x 2.0 m
l x w x h: 8.0 x 1.0 x 2.5 m
weight approx. 1200 kg
built in 1976

dismantling and loading by buyer

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      




 GLUING PRESS HYDRAULIC FORMAT L X B: 8.0 M X 2.0 M L X W X H: 8.0 X 1.0 X 2.5 M WEIGHT APPROX. 1200 KG BUILT IN 1976 DISMANTLING AND LOADING BY BUYER THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: 11.800 €
Ubicación: Land-single sided edge banding machine\r\nbrand: homag\r\ntype: kl 76/a3/s2 optimat\r\nyear: 1996\r\n\r\ntechnical data:\r\n\r\ntop pressure:\r\nwith driven v-belt\r\nmotorical height adjustment\r\n\r\n- enter nc16\r\n- programmable logic control (sps)\r\n\r\n- feed stepless adjustable 18-24 m/min.\r\n- working height 950 mm\r\n- working width min.: 55 mm at workpiece thickness 22 mm, 100 mm at workpiece thickness 60 mm (depending on the workpiece length)\r\n- workpiece overhang 30 mm\r\n- workpiece thickness 12-60 mm\r\n- edge material coil 0,3-3 mm\r\n- edge cross sectional area max. 135 mm2\r\n- coil Ø max. 900 mm\r\n\r\nworkpiece support for single sided machine\r\nextension of the workpiece support: 6 x left hand side\r\nadditional extension of workpiece support up to max. 1500 mm incl. supports from ground\r\n\r\npre-installation for addition of boomerang/ligmatech\r\n\r\npre-milling unit:\r\n2 motors each 3 kw\r\n\r\nhot melt unit\r\nmelting unit with granulate tank\r\n\r\nextension of magazine to 6 coils\r\nedge thickness 2x3 mm und 4x1 mm\r\ncoil Ø 2x900 mm and 4x600 mm\r\ncoil change automatical or manual\r\nrest length monitoring at 2400 mm\r\n\r\npressure zone\r\n1 driven pre-pressure rollers Ø 150 mm\r\n2 post-pressure rollers Ø 70 mm\r\n\r\nend trimming unit hl81 chamfer/straight\r\n2 motors each 0,18 kw\r\nadjusting device chamfer/straight for hl end trimming\r\n\r\nrough milling unit 0,55 kw \r\n2 motors one above the other each 0,55 kw\r\n\r\nprofile milling unit fk03\r\n2 motors each 0,55 kw\r\nautomatical 4-fold tool changer\r\nselector switch lengthwise-/all round milling.\r\nfeed max. 20 m/min.\r\nworkpiece length min.: 240 mm single sided, 240 mm double sided\r\ndistance between workpieces min. 650 mm\r\nworkpiece thickness 12-60 mm\r\nthe min. workpiece length increases up to 230mm at use of workpieces with more than 40 mm thickness\r\n\r\npost-cleaning device profile\r\n2 x left hand side profile scraper for post-cleaninn device\r\npost-cleaning device glued joint\r\n1 x empty space left hand side approx. 345 mm\r\nbuffing unit top and bottom with oscillation\r\n\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding.\r\n SINGLE SIDED EDGE BANDING MACHINE\R\NBRAND: HOMAG\R\NTYPE: KL 76/A3/S2 OPTIMAT\R\NYEAR: 1996\R\N\R\NTECHNICAL DATA:\R\N\R\NTOP PRESSURE:\R\NWITH DRIVEN V-BELT\R\NMOTORICAL HEIGHT ADJUSTMENT\R\N\R\N- ENTER NC16\R\N- PROGRAMMABLE LOGIC CONTROL (SPS)\R\N\R\N- FEED STEPLESS ADJUSTABLE 18-24 M/MIN.\R\N- WORKING HEIGHT 950 MM\R\N- WORKING WIDTH MIN.: 55 MM AT WORKPIECE THICKNESS 22 MM, 100 MM AT WORKPIECE THICKNESS 60 MM (DEPENDING ON THE WORKPIECE LENGTH)\R\N- WORKPIECE OVERHANG 30 MM\R\N- WORKPIECE THICKNESS 12-60 MM\R\N- EDGE MATERIAL COIL 0,3-3 MM\R\N- EDGE CROSS SECTIONAL AREA MAX. 135 MM2\R\N- COIL Ø MAX. 900 MM\R\N\R\NWORKPIECE SUPPORT FOR SINGLE SIDED MACHINE\R\NEXTENSION OF THE WORKPIECE SUPPORT: 6 X LEFT HAND SIDE\R\NADDITIONAL EXTENSION OF WORKPIECE SUPPORT UP TO MAX. 1500 MM INCL. SUPPORTS FROM GROUND\R\N\R\NPRE-INSTALLATION FOR ADDITION OF BOOMERANG/LIGMATECH\R\N\R\NPRE-MILLING UNIT:\R\N2 MOTORS EACH 3 KW\R\N\R\NHOT MELT UNIT\R\NMELTING UNIT WITH GRANULATE TANK\R\N\R\NEXTENSION OF MAGAZINE TO 6 COILS\R\NEDGE THICKNESS 2X3 MM UND 4X1 MM\R\NCOIL Ø 2X900 MM AND 4X600 MM\R\NCOIL CHANGE AUTOMATICAL OR MANUAL\R\NREST LENGTH MONITORING AT 2400 MM\R\N\R\NPRESSURE ZONE\R\N1 DRIVEN PRE-PRESSURE ROLLERS Ø 150 MM\R\N2 POST-PRESSURE ROLLERS Ø 70 MM\R\N\R\NEND TRIMMING UNIT HL81 CHAMFER/STRAIGHT\R\N2 MOTORS EACH 0,18 KW\R\NADJUSTING DEVICE CHAMFER/STRAIGHT FOR HL END TRIMMING\R\N\R\NROUGH MILLING UNIT 0,55 KW \R\N2 MOTORS ONE ABOVE THE OTHER EACH 0,55 KW\R\N\R\NPROFILE MILLING UNIT FK03\R\N2 MOTORS EACH 0,55 KW\R\NAUTOMATICAL 4-FOLD TOOL CHANGER\R\NSELECTOR SWITCH LENGTHWISE-/ALL ROUND MILLING.\R\NFEED MAX. 20 M/MIN.\R\NWORKPIECE LENGTH MIN.: 240 MM SINGLE SIDED, 240 MM DOUBLE SIDED\R\NDISTANCE BETWEEN WORKPIECES MIN. 650 MM\R\NWORKPIECE THICKNESS 12-60 MM\R\NTHE MIN. WORKPIECE LENGTH INCREASES UP TO 230MM AT USE OF WORKPIECES WITH MORE THAN 40 MM THICKNESS\R\N\R\NPOST-CLEANING DEVICE PROFILE\R\N2 X LEFT HAND SIDE PROFILE SCRAPER FOR POST-CLEANINN DEVICE\R\NPOST-CLEANING DEVICE GLUED JOINT\R\N1 X EMPTY SPACE LEFT HAND SIDE APPROX. 345 MM\R\NBUFFING UNIT TOP AND BOTTOM WITH OSCILLATION\R\N\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 1.980 €
Ubicación: Land-gluing press hydraulic

format l x b: 10.0 m x 2.0 m
l x w x h: 10.0 x 1.0 x 2.5 m
weight approx. 1400 kg
built in 1978

dismantling and loading by buyer

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      






 GLUING PRESS HYDRAULIC FORMAT L X B: 10.0 M X 2.0 M L X W X H: 10.0 X 1.0 X 2.5 M WEIGHT APPROX. 1400 KG BUILT IN 1978 DISMANTLING AND LOADING BY BUYER THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: 31.500 €
Ubicación: Land-single sided edge banding machine\r\nmake: homag\r\ntype: kl 79/a20/s2-20mm\r\nyear: 2000\r\n\r\ntechnical data:\r\ncoil or as strip, up to 20 mm edge thickness, in lenghtwise and crosswise feed.\r\n\r\ncontrol nc21\r\n\r\n- feed stepless controllable 18 - 24 m/min\r\n- working height 950 mm\r\n- working width min.:\r\n- 55 mm at workpiece thickness 22 mm, 100 mm at workpiece thickness 60 mm (depending on the workpiece length)\r\n- workpiece overhang 30 mm\r\n- workpiece thickness 12 - 60 mm\r\n- edge material strip max. 0,4 - 20 mm\r\n- edge cross sectional area strip max. 900 mm2\r\n- edge material coil 0,3 - 3 mm\r\n- edge cross sectional area max.: at pvc 135 mm2,  at veneer 100 mm2\r\n- coil Ø max. 830 mm\r\n- floor condition should match the foundation plan.\r\n\r\nsliding table\r\n- for rectangular feed at single sided processing.\r\n-workpiece dimensions max. 500 x 1600 mm\r\n\r\nanti-stick solvent application\r\n-via spraying nozzles top/bottom\r\n\r\npre-milling unit \r\n2 motoren je 3 kw, 150 hz, 9000 1/min.\r\n\r\nworkpiece pre-heating:\r\nto heat the workpiece edge before glue application for a better glue quality\r\n\r\ngluing unit a20:\r\nconsisting of:\r\nhot melt unit 0a34\r\n\r\nmagazine\r\nfor strip ware, massive edges and coil ware\r\nfeed of strip ware via vacuum succer\r\nedge monitoring with automatical feed stop at missing edge\r\n\r\npressure zone c\r\n1 driven pre-pressure roller Ø 150 mm\r\n6 post-pressure rollers Ø 70 mm\r\npressure adjustments pneumatical\r\ncentral adjustment on different edge thicknesses\r\n\r\nautomatical adjustment pressure zone optimat\r\nfor automatical adjustment of pressure zone at different edge thickness\r\n\r\n1 pc. chip removal conveyor for optimat installed in machine stand.\r\n\r\nend trimming unit hl 83 chamfer/straight\r\n2 motors each 0,5 kw, 200 hz., 12000 rpm.\r\nfor the end trimming of edge overhangs on frontal and rear edge\r\nedge thickness chamfer max. 3 mm\r\n\r\nautomatical adjustment hl 81/83\r\nfor electropneumatical setup from chamfer to straight and stepless adjustment of foldable side stop for chamfer end trimming at different edge thicknesses.\r\n\r\npneumatical adjustment end trimming motor lateral for electropneumatical side adjustments of end trimming motors on 2 positions.\r\nposition 1 - flush trimming\r\nposition 2 - end trimming with overhang - for post-milling with profile milling unit\r\n\r\n1 pc rough milling unit 1,5 kw optimat\r\n2 motors one above the other each 1,5 kw, 200 hz., 12000 rpm.\r\n\r\n1 pc pneumatical adjustment rough milling unit optimat on 2 positions\r\nposition 1 - rough milling with edge overhang (approx. 0,2 mm)\r\nposition 2 - flush milling without edge overhang\r\n\r\n1 pc. profile milling unit fk 13 8-fold automatical\r\nfor processing of edge overhangs on the workpiece top- and bottom edge as well for milling arround top- and bottom edge in connection to end trimming unit and rough milling unit.\r\n2 motors each 0,4 kw, 200 hz., 12000 rpm.\r\nautomatical 8 -fold tool changer.\r\nselector switch lengthwise-/surround milling.\r\nfeed max. 20 m/min.\r\nworkpiece length min. -  240 mm single sidede, 120 mm double sided\r\ndistance between workpieces min. 650 mm\r\nworkpiece thickness 12  -  60 mm\r\nedge thickness max. 5 mm\r\n\r\nautomatical adjustment for fk-device\r\nfor automatical adjustment at same radii on different edge thickness f.e. r=3 mm on egde thickness 3 mm or 6 mm and for moving out of the working area.\r\n\r\n1 x universal milling unit 4 kw controlled uf11\r\n- installed on back side of miller stand\r\n- cross support with spindle adjustment\r\n- 1 motor 4 kw, 150 hz., 9000 rpm\r\n- swivable max. 90 degrees\r\n\r\n1 pc. re-cleaning unit profile\r\ntracing from above, bottom and side for chamfering or rounding of rough milled pvc-edges. blowing nozzles electropneumatical controlled.\r\n\r\n1 pc. pvc-chip tear off top/bottom for better pvc-chip removal\r\n\r\n2 pcs. pneumatic adjustment re-cleaning profil optimat\r\nfor electropneumatical lateral move out of the working area.\r\n\r\n1 pc. re-cleaning device glued joint\r\nremove of glue rests in the area of glued joint. tracing from top and bottom.\r\n\r\n1 pc. pneumatic adjusments re-cleaning profil optimat\r\nfor electropneumatical lateral move out of the working area\r\n\r\n1 pc. buffing unit top and bottom with oscilating for making the edges handy.\r\n2 motors each 0,25 kw, tilt and height adjustable\r\n\r\nligmatech workpiece return\r\nzhr 10/s left hand side 9500 mm\r\n\r\nfor edge banding machine left hand side, length approx. 9500 mm\r\nthe workpiece return zhr 10 allows the one-man-operation of single sided throughfeed machines. workpieces which come out of the machine are transported to a roller conveyor and will be crosswise transfered via a driven v-belt and will be returned via a belt and a roller table.\r\n\r\nthe option turning plus top pressure allows the 90° turn of workpieces coming out of the machine and will be lengthwise returned\r\n\r\nthe following version consists of:\r\n-  roller conveyor tr 10/42/22 with takeover v-belts of the kl\r\nturning plate with turn support, thickness adjustment manual\r\nsmall parts construction set in front of cycle fenc SINGLE SIDED EDGE BANDING MACHINE\R\NMAKE: HOMAG\R\NTYPE: KL 79/A20/S2-20MM\R\NYEAR: 2000\R\N\R\NTECHNICAL DATA:\R\NCOIL OR AS STRIP, UP TO 20 MM EDGE THICKNESS, IN LENGHTWISE AND CROSSWISE FEED.\R\N\R\NCONTROL NC21\R\N\R\N- FEED STEPLESS CONTROLLABLE 18 - 24 M/MIN\R\N- WORKING HEIGHT 950 MM\R\N- WORKING WIDTH MIN.:\R\N- 55 MM AT WORKPIECE THICKNESS 22 MM, 100 MM AT WORKPIECE THICKNESS 60 MM (DEPENDING ON THE WORKPIECE LENGTH)\R\N- WORKPIECE OVERHANG 30 MM\R\N- WORKPIECE THICKNESS 12 - 60 MM\R\N- EDGE MATERIAL STRIP MAX. 0,4 - 20 MM\R\N- EDGE CROSS SECTIONAL AREA STRIP MAX. 900 MM2\R\N- EDGE MATERIAL COIL 0,3 - 3 MM\R\N- EDGE CROSS SECTIONAL AREA MAX.: AT PVC 135 MM2, AT VENEER 100 MM2\R\N- COIL Ø MAX. 830 MM\R\N- FLOOR CONDITION SHOULD MATCH THE FOUNDATION PLAN.\R\N\R\NSLIDING TABLE\R\N- FOR RECTANGULAR FEED AT SINGLE SIDED PROCESSING.\R\N-WORKPIECE DIMENSIONS MAX. 500 X 1600 MM\R\N\R\NANTI-STICK SOLVENT APPLICATION\R\N-VIA SPRAYING NOZZLES TOP/BOTTOM\R\N\R\NPRE-MILLING UNIT \R\N2 MOTOREN JE 3 KW, 150 HZ, 9000 1/MIN.\R\N\R\NWORKPIECE PRE-HEATING:\R\NTO HEAT THE WORKPIECE EDGE BEFORE GLUE APPLICATION FOR A BETTER GLUE QUALITY\R\N\R\NGLUING UNIT A20:\R\NCONSISTING OF:\R\NHOT MELT UNIT 0A34\R\N\R\NMAGAZINE\R\NFOR STRIP WARE, MASSIVE EDGES AND COIL WARE\R\NFEED OF STRIP WARE VIA VACUUM SUCCER\R\NEDGE MONITORING WITH AUTOMATICAL FEED STOP AT MISSING EDGE\R\N\R\NPRESSURE ZONE C\R\N1 DRIVEN PRE-PRESSURE ROLLER Ø 150 MM\R\N6 POST-PRESSURE ROLLERS Ø 70 MM\R\NPRESSURE ADJUSTMENTS PNEUMATICAL\R\NCENTRAL ADJUSTMENT ON DIFFERENT EDGE THICKNESSES\R\N\R\NAUTOMATICAL ADJUSTMENT PRESSURE ZONE OPTIMAT\R\NFOR AUTOMATICAL ADJUSTMENT OF PRESSURE ZONE AT DIFFERENT EDGE THICKNESS\R\N\R\N1 PC. CHIP REMOVAL CONVEYOR FOR OPTIMAT INSTALLED IN MACHINE STAND.\R\N\R\NEND TRIMMING UNIT HL 83 CHAMFER/STRAIGHT\R\N2 MOTORS EACH 0,5 KW, 200 HZ., 12000 RPM.\R\NFOR THE END TRIMMING OF EDGE OVERHANGS ON FRONTAL AND REAR EDGE\R\NEDGE THICKNESS CHAMFER MAX. 3 MM\R\N\R\NAUTOMATICAL ADJUSTMENT HL 81/83\R\NFOR ELECTROPNEUMATICAL SETUP FROM CHAMFER TO STRAIGHT AND STEPLESS ADJUSTMENT OF FOLDABLE SIDE STOP FOR CHAMFER END TRIMMING AT DIFFERENT EDGE THICKNESSES.\R\N\R\NPNEUMATICAL ADJUSTMENT END TRIMMING MOTOR LATERAL FOR ELECTROPNEUMATICAL SIDE ADJUSTMENTS OF END TRIMMING MOTORS ON 2 POSITIONS.\R\NPOSITION 1 - FLUSH TRIMMING\R\NPOSITION 2 - END TRIMMING WITH OVERHANG - FOR POST-MILLING WITH PROFILE MILLING UNIT\R\N\R\N1 PC ROUGH MILLING UNIT 1,5 KW OPTIMAT\R\N2 MOTORS ONE ABOVE THE OTHER EACH 1,5 KW, 200 HZ., 12000 RPM.\R\N\R\N1 PC PNEUMATICAL ADJUSTMENT ROUGH MILLING UNIT OPTIMAT ON 2 POSITIONS\R\NPOSITION 1 - ROUGH MILLING WITH EDGE OVERHANG (APPROX. 0,2 MM)\R\NPOSITION 2 - FLUSH MILLING WITHOUT EDGE OVERHANG\R\N\R\N1 PC. PROFILE MILLING UNIT FK 13 8-FOLD AUTOMATICAL\R\NFOR PROCESSING OF EDGE OVERHANGS ON THE WORKPIECE TOP- AND BOTTOM EDGE AS WELL FOR MILLING ARROUND TOP- AND BOTTOM EDGE IN CONNECTION TO END TRIMMING UNIT AND ROUGH MILLING UNIT.\R\N2 MOTORS EACH 0,4 KW, 200 HZ., 12000 RPM.\R\NAUTOMATICAL 8 -FOLD TOOL CHANGER.\R\NSELECTOR SWITCH LENGTHWISE-/SURROUND MILLING.\R\NFEED MAX. 20 M/MIN.\R\NWORKPIECE LENGTH MIN. - 240 MM SINGLE SIDEDE, 120 MM DOUBLE SIDED\R\NDISTANCE BETWEEN WORKPIECES MIN. 650 MM\R\NWORKPIECE THICKNESS 12 - 60 MM\R\NEDGE THICKNESS MAX. 5 MM\R\N\R\NAUTOMATICAL ADJUSTMENT FOR FK-DEVICE\R\NFOR AUTOMATICAL ADJUSTMENT AT SAME RADII ON DIFFERENT EDGE THICKNESS F.E. R=3 MM ON EGDE THICKNESS 3 MM OR 6 MM AND FOR MOVING OUT OF THE WORKING AREA.\R\N\R\N1 X UNIVERSAL MILLING UNIT 4 KW CONTROLLED UF11\R\N- INSTALLED ON BACK SIDE OF MILLER STAND\R\N- CROSS SUPPORT WITH SPINDLE ADJUSTMENT\R\N- 1 MOTOR 4 KW, 150 HZ., 9000 RPM\R\N- SWIVABLE MAX. 90 DEGREES\R\N\R\N1 PC. RE-CLEANING UNIT PROFILE\R\NTRACING FROM ABOVE, BOTTOM AND SIDE FOR CHAMFERING OR ROUNDING OF ROUGH MILLED PVC-EDGES. BLOWING NOZZLES ELECTROPNEUMATICAL CONTROLLED.\R\N\R\N1 PC. PVC-CHIP TEAR OFF TOP/BOTTOM FOR BETTER PVC-CHIP REMOVAL\R\N\R\N2 PCS. PNEUMATIC ADJUSTMENT RE-CLEANING PROFIL OPTIMAT\R\NFOR ELECTROPNEUMATICAL LATERAL MOVE OUT OF THE WORKING AREA.\R\N\R\N1 PC. RE-CLEANING DEVICE GLUED JOINT\R\NREMOVE OF GLUE RESTS IN THE AREA OF GLUED JOINT. TRACING FROM TOP AND BOTTOM.\R\N\R\N1 PC. PNEUMATIC ADJUSMENTS RE-CLEANING PROFIL OPTIMAT\R\NFOR ELECTROPNEUMATICAL LATERAL MOVE OUT OF THE WORKING AREA\R\N\R\N1 PC. BUFFING UNIT TOP AND BOTTOM WITH OSCILATING FOR MAKING THE EDGES HANDY.\R\N2 MOTORS EACH 0,25 KW, TILT AND HEIGHT ADJUSTABLE\R\N\R\NLIGMATECH WORKPIECE RETURN\R\NZHR 10/S LEFT HAND SIDE 9500 MM\R\N\R\NFOR EDGE BANDING MACHINE LEFT HAND SIDE, LENGTH APPROX. 9500 MM\R\NTHE WORKPIECE RETURN ZHR 10 ALLOWS THE ONE-MAN-OPERATION OF SINGLE SIDED THROUGHFEED MACHINES. WORKPIECES WHICH COME OUT OF THE MACHINE ARE TRANSPORTED TO A ROLLER CONVEYOR AND WILL BE CROSSWISE TRANSFERED VIA A DRIVEN V-BELT AND WILL BE RETURNED VIA A BELT AND A ROLLER TABLE.\R\N\R\NTHE OPTION TURNING PLUS TOP PRESSURE ALLOWS THE 90° TURN OF WORKPIECES COMING OUT OF THE MACHINE AND WILL BE LENGTHWISE RETURNED\R\N\R\NTHE FOLLOWING VERSION CONSISTS OF:\R\N- ROLLER CONVEYOR TR 10/42/22 WITH TAKEOVER V-BELTS OF THE KL\R\NTURNING PLATE WITH TURN SUPPORT, THICKNESS ADJUSTMENT MANUAL\R\NSMALL PARTS CONSTRUCTION SET IN FRONT OF CYCLE FENC
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 4.890 €
Ubicación: Land-mobile crane iron fairy brithoist mark ii opal

2-axis
axle load to maximum 7.7 to total 15.4
street-legal
speed 19.3 km / h
l x w x h: 790 x 250 x 300 cm
built in 1972
3 to lifting capacity at maximum boom length
maximum jib length 9 m

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      




 MOBILE CRANE IRON FAIRY BRITHOIST MARK II OPAL 2-AXIS AXLE LOAD TO MAXIMUM 7.7 TO TOTAL 15.4 STREET-LEGAL SPEED 19.3 KM / H L X W X H: 790 X 250 X 300 CM BUILT IN 1972 3 TO LIFTING CAPACITY AT MAXIMUM BOOM LENGTH MAXIMUM JIB LENGTH 9 M THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: 12.000 €
Ubicación: Land-rückführung für einseitige kantenanleimmaschine (rechtsmaschine)\r\nfabrikat: ligmatech\r\ntyp: zhr 05/r/105\r\nbaujahr: 2000\r\n\r\nlänge: ca. 12 meter\r\n\r\n RüCKFüHRUNG FüR EINSEITIGE KANTENANLEIMMASCHINE (RECHTSMASCHINE)\R\NFABRIKAT: LIGMATECH\R\NTYP: ZHR 05/R/105\R\NBAUJAHR: 2000\R\N\R\NLäNGE: CA. 12 METER\R\N\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MATEC types: