574 ofertas

Año de construcción: 2011
Precio: 33.300 €
Ubicación: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Vendedor: SOCIETE FIMOTEC

Machining center - vertical HARTFORD VMC 1270 bearing no 1105-02485 category machining center - vertical make HARTFORD type VMC 1270 year 2011 State second-hand machine CNC CNC FANUC I OM storage France country of origin Taiwan Lieferzei t January x trail 1270 mm y route 635 mm z route 635 mm table size 1370 X 600 mm speed range - milled 60-8000 RPM CNC FANUC I OM power - Milling spindle 15 kW BT 40 tool holder number of tool magazine stations 30 stations feed range 1-10000 mm / min speed: 30 m/min total power 30 kW machine weight 5500 kg space requirement approx. 2300 x 2400 x 2600 mm accessories full protection - fairing complete machine documentation central lubrication RS 232 data int ... more

Año de construcción: usado
Ubicación: Land-DE Germany, 47652 Weeze
Vendedor: Thünnesen GmbH

rounding length 2550 mm\r\neach belt extra motor \r\nbelt width 160 mm, incl. fan for hot air more

Año de construcción: 1991
Precio: 3.000 €
Ubicación: Land-nl NL Broek op Langedijk
Vendedor: BVA Auctions

Auction name: Bankruptcy A.T. Beukers B.V. (producer of wooden floors) in Broek op Langedijk Online auction Start of auction: 21 September 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 03 October 2018 16:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions more

Año de construcción: 1991
Ubicación: Land-ru RU Russland
Vendedor: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Type HBC 100 Year of construction 1991, 2017 overhauled Hours of operation 40,586 hours Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 3,15 m³ Theoretic cycle time 22 sec. Bale size 750 x 1,100 mm, length variable Driving motor 2 x 30 kW Tying system 5 fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm up to 12 tons/h bulk weight of 50 kg/cbm up to 25 tons/h bulk weight of 100 kg/cbm up to 47 tons/h Bale weight 550 up to 850 kg, depends on material Volume hydraulic oil tank 1,200 l SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., typ ... more

Año de construcción: 2011
Ubicación: Land-de DE Baden Württemberg
Vendedor: METEC GmbH

CNC universal machining center Manufacturer: Coarse Type: G-350 Year of construction: 2011 CNC control: Siemens 840 d SL Traverse paths: X/Y/Z = 600 x 770 x 675 mm Pallet changer: 400 x 400 mm Tool changers: 99-fach + 10 separate courses Tool holder: HSK A63 Probe Hexagon Chip conveyor Weight: 12,000 kg Reference No.: WEI1300 Machine suitable for: 5-sided machining Space holes and angles Forms and flow profiles Precision parts more

Año de construcción: 2000
Ubicación: Land-nl NL Niederlande
Vendedor: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Typ HBC 100 K Year of construction 2000 Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 720 mm Driving motor 75 kW Tying system 5 fold vertical, 3 fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.. 16 tons/h bulk weight of 50 kg/cbm approx.. 25 tons/h bulk weight of 100 kg/cbm approx.. 47 tons/h Bale weight 550 up to 880 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 11 ... more

Año de construcción: 2000
Precio: 45.000 €
Ubicación: Land-de DE 58091 Hagen, Delsterner Str. 53a
Vendedor: TechnoMac - Maschinen, Roboter, Automatisierung

A CNC machining center of manufacturer Johnford is available here. The machine is fully operational. Technical data: Manufacturer: Johnford Type: VMC-2000SHD Year of construction: 2000 Control: Fanuc 18 M Table area: 2200 x 1000 mm H9kixs933 Table load: 4800 kg Traverse paths x-Y-Z: 2050-1100-800 mm Spindelaufnhame: BT 50 Spindle rotation: 10-4500 RPM Spindle motor: 25 HP(30min) / 20HP(const) 2 reduction stages Rapid traverse x-Y-Z: 15-15-12 m / min Feed: 1-8000 mm / min Magazine capacity: 24 Space: 5500 x 5300 mm - transport dimensions significantly smaller Weight: 20 to Cutting capacity: Milling: 320 cm ³/min Drilling: 52 mm Thread: M50XP4. 5 more

Año de construcción: 1966
Precio: used machinery auction RESALE 1.500 €
Ubicación: Land-fr FR France, 50800 Villedieu les Poelles
Vendedor: Surplex GmbH

Weight approx.: 4000 kg Dimensions (l x w x h) approx.: 1750 x 1400 x 2850 mm Description: Folding machine, 1250 mm x 125 T more

Año de construcción: 2005
Ubicación: Land-de DE 86971 Peiting, Zechenstr. 10
Vendedor: CNC Bote Johann Demmel

Built in 2005 Power-on hours approximately 27.000 h Control Siemens 840 d ShopMill Traverse paths X 1100 Y 600 Z 600 mm Table size 1200 x 600 mm Table load 1,000 kg Spindle speeds 20-8,000 rpm 24 x tool changer Chuck SK40 Chip conveyor IKZ factory cavity cooling 20 bar with filter system Preparation radio Blum measuring switch more

Año de construcción: usado
Ubicación: Land-de Germany, 32683 Barntrup
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Frame sanding machine machine\r\nBrand: Italmecanica (Ecoline)\r\nType: MEC Power\r\n\r\nWorkpiece dimensions:\r\n- Max. width 1600mm\r\n- Min. length 500 mm\r\n- Max. strength 120 mm\r\n\r\n- One-man-operation possible\r\n- Frames / doors / panels\r\n\r\nUnits:\r\n2 verticale brushes to sand the outer edges\r\n- Power of brushes 0,55 kW\r\n- Tilt electro pneumatical controlled, up to + 35 ° swivable to adapt on the profile\r\n\r\n1 Deep brush to sand the inner sides and face side\r\n- Power 0,55 kW\r\n\r\n1 upper horizontal brush to sand the surfaces\r\n- Length 1600mm \r\n- Power 3 kW\r\n\r\n1 upper horizontal brush to sand the surfaces\r\n- Length 1600mm \r\n- Power 3 kW\r\n\r\n1 Brush\r ... more

Año de construcción: 2002
Ubicación: Land-de DE 64653 Lorsch
Vendedor: EnTeHa GmbH & Co KG

: 4100 No.1 gebr. Rods - machining center 5 - axes Fabr. LID MAHO, DMC type 60 S Bu. 2002 with Sinumerik 840 D - Powerline Shopmill ARB.-ber.: 760 x 460 x 560 mm Power: 19/28 kW Accessories: NC Swivel Head (B-axis) 120 / + 30 ° 60-Fach tool magazine with taper cleaning NC rotary axis (A-axis) with collet Chuck clamping top 65 Tailstock, hydraulically tweeter NC bar loader 1100 mm Workpiece pick-up facility with discharge conveyor Production package with -Coolant tank 600 l, INTERLIT SKA 200-760 - IKZ 40 bar through the Centre of the spindle -Conveyors -Rotating viewing window Tool measurement Fabr. BLUM Oil mist extraction Mode 4 Other: HSK-A 63 spindle speed range up to ... more

Año de construcción: 1993
Ubicación: Grenzach-Wyhlen
Vendedor: Gromag AG

x-axis: 250 mm z-axis: 285 mm c-axis: 360 mm rapid traverse: 15/24 mm/min control: Siemens Sinumerik turning speed range - spindle: 8000 U/min spindle nose: A8 bar hollow: 26 mm tool turret with 12 work positions: tool holder: VDI 16 bar feed column: Sameca chuck: mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,1x0,8x1,6 m Switch-on hours: 15.000 h with parts catcher more

Año de construcción: 2000
Ubicación: Land-it IT 36066 Sandrigo, Via Piave, 7
Vendedor: Baldin SRL

Working centre ESSETEAM model SPRINT M12 at 4 axis: - working plane 3000x1200mm - axis run: X=3500 / Y=1750 / Z=200 mm - max panel thickness 120mm - working plane at 6 bars - vacuum pump 100 mc/h - electronic control with PC - safety carpets on machine front Working groups: - vertical spindle HP 10, attachment ISO30, with inverter 1.000 - 18.000rpm, with 4° rotary "C" axis, served by automatic tools changer at 8 positions and by back tools changer at 3 positions for angular heads - boring unit with 7+7 vertical chucks (X+Y) 2+2 horizontal chucks on X (panel heads) 1+1 horizontal chucks on Y (panel edges) currently missing Equipped with: 7 cone ISO30 1 angular h ... more

Año de construcción: 1984
Ubicación: Goldenstedt
Vendedor: WeMa A. Pigge GmbH

pressure: 50 t chamfer lenght: 2000 mm distance between columns: 1660 mm Control: Meyer PC 3000 back stop - adjustable: 750 mm two hand operation with foot control: throat: 400 mm stroke: 100 mm working feed: 7,5 mm/sec weight of the machine ca.: 3 t dimensions of the machine ca.: 1600 x 2300 x 2050 mm Control defective! pneumatic height adjustment of the stop fingers INCLUDED 2 upper tools 2 lower tools As you can see in the pictures 5 jaws for the upper tool attachment and 2 flat jaws for the lower tool are missing more

Año de construcción: 1975
Ubicación: Land-de DE 76646 Bruchsal - Büchenau, Neutharder Str. 24a
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG

MECHANIC LATHE HAMLET MDU 260-28 - 04-04-004 Shipping time: immediately Number: 04-04-004 Manufacturer: Weiler Type: MDU 260-28 MACHINE DATA Year: circa 1975 L x W x h: approx. 1200 x 800 x 1500 mm Weight: approx. 500 kg Very good condition TECHNICAL DATA Digital display (optional): 2 or 3 - axes - digital display new Dimensions: Maximum turning diameter over bed: approx. Ã? 260 mm Maximum turning diameter over support: approx. Ã? 140 mm Maximum turning length: 500 mm Bar passage: approx. Ã? 28 mm Spindle: Speed range: approx. 110-3600 RPM Spindle nose: M45 x 3.5 Power: approx. 1,8 kW Tailstock: MK 2 ACCESSORIES â ... more

Año de construcción: 2006
Ubicación: Deutschland
Vendedor: IMZ Maschinen Vertriebs GmbH

centre height: 210 mm diameter: 250 mm total power requirement: kW weight of the machine ca.: 145 kg dimensions of the machine ca.: 0,6x0,6x0,4 m 591/5000 Dividing attachment MECA MOD.DCN 4 Axis - IT WAS NOT USED! System Hydraulic Flange 250 mm diameter Cable set for Siemens engine Operators Manual TECHNICAL CHARACTERISTICS Motor AC Servo Motor - SIEMENS 1 FK 6060-6AF71-1AG0 Rotary encoder Monttier - Schneckenwell Reduction motor and divider - 1: 120 Rotary encoder and divider - 1:90 Proximity switch: PepperlFuchs NBB 1.5-8 GM 60-A2 System: Hydraulic Actuation - Hydropneumatic multiplier - AIR: 6 BAR Electro valve: Brand: HOERBIRGER VOLTAGE: 24 V.DC. Pressure switch - Brand: HOERBIRGER Setti ... more

Año de construcción: 1978
Ubicación: Land-es ES
Vendedor: GINDUMAC GmbH

OVERVIEW: Brand: PROMECAM MEBUSA Model: RG 204 Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 1978 Production hours: 10000 Location: Spain Country of origin: Spain GENERAL DATA: Measurements width: 4500 mm Measurements depth: 1910 mm Measurements height: 2840 mm Machine weight: 13800 kg MAIN DRIVE: Spindle motor power: 15 kW Shearing force: 2400 kN Gooseneck: 400 mm Max sheet length: 4050 mm Distance between bars: 3700 mm ADDITIONAL EQUIPMENT: 1 - Tools more

Año de construcción: usado
Ubicación: Dreieich
Vendedor: KIRCHGEORG Werkzeugmaschinen GmbH

table diameter: 400 mm table load: ? t table height: 140 mm total power requirement: kW weight of the machine ca.: 100 kg more

Año de construcción: 1986
Ubicación: Land-de DE Deutschland
Vendedor: METEC GmbH

Boring mill Tischbohrwerk Manufacturer: Union Type: BFKF 130/1 Year of construction: 1986 CNC control: Sinumerik Traverse paths: X/Y/Z = 2,000 x 1600 x 800 mm Spindle diameter: 130 mm Spindle stroke: 630 mm Distance from spindle Center - clamping surface: 1.600 mm maximum workpiece weight: 8.000 kg Clamping surface: 1.600 x 1,250 mm Tool holder: Iso50 Weight: 25,700 kg more

Año de construcción: 1997
Ubicación: Dreieich
Vendedor: KIRCHGEORG Werkzeugmaschinen GmbH

x-travel: 1500 mm y-travel: 800 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 2,66 x 1,60 x 3,10 m Installation and calibration of the machine can be supplied by the manufacturer MDM at site of installation at extra costs. CNC-controlled Coordinate Measuring Machine for fully automatic measuring of workpieces. Incl. Measuring Software MDM Metrosoft Level 2 for measuring of: - Points, surfaces, circles, cylinders, cones, distances and angles. - SPC software for statistic evaluation of the measurements more

Año de construcción: 2006
Ubicación: Land-de DE Deutschland
Vendedor: METEC GmbH

Vertical machining center Manufacturer: Milltronic Type: TT24 Year of construction: 2006 CNC control: Centurion 7 Traverse paths: X/Y/Z = 610 x 635 x 508 mm Table size: 660 x 560 mm Double table (twin table) Tool changer: 24 x Recording: SK40 Additional equipment for 5-axis Power-on hours: 24.400 h Weight: 4,500 kg more

Año de construcción: 1991
Ubicación: ab Lager Monheim am Rhein
Vendedor: Kemmerich Werkzeugmaschinen GmbH

max. wheel diameter: 630 mm gear width: 200 mm max. module: 10 min. module: 1 work accuracy: DIN 6 clamping table diameter: 710 mm table bore diameter: 150 mm number of strokes - stepless: 35,5 - 560 max. ram stroke: 230 mm feeds: 3,55 - 40 mm/min radial feed: 0,8 - 9 mm/min work-spindle diameter: 110 mm total power requirement: 28,2 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 3,8 x 2,3 x 2,5 m build under licence of LORENZ and identically constructed as LS 630 2012 partl. rebuilt with - new electric from Telemecanique / Programable - outer steady / tailstock - chip conveyor - set of change gears Never used in Production after rebuilding more

Año de construcción: 1987
Ubicación: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Vendedor: Mieth Maschinenhandel

Technical data: -Saw blade dimensions approx. 420 x 3.8 x 40 mm -Blade rotation speed 2800 RPM -Moveable blade to 0-45 ° -Cutting area approx. 160 x 120 mm - feed length for 90 ° cuts 5-600 mm -Compressed air supply 7 bar -Drive per 400 V / 3.0 kW - space requirement approx. B 2850 x H 1600 X 1200 mm -Weight approx. 380 kg -with: - pneumatic Vice -pneumatic coolant spray - machine frame made of steel more

Año de construcción: 1991
Ubicación: Metzingen
Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

turning diameter: 42 mm turning length: 250 mm control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-lathe with bar feed with Sameca bar feed more

Año de construcción: 2003
Precio: 6.500 €
Ubicación: Land-de DE 64367 Mühltal (Nieder-Ramstadt), An der Schillertanne 7
Vendedor: Hagen Busch Maschinenhandel

Technical data: -Manufacturer: Meba -Type: ECO335DG -Country of origin: Germany -BJ. about 2003 -Cutting area: approximately 335 mm, flat 500 x 335 mm MITRE right: at: 45° 320 x 335 mm 330 mm flat round at: 30 ° round 180 mm Flach170 x 335 mm MITRE left: 45° 305 305 x 335 mm Saw band 4400 x 34 x 1,1 mm -with instructions MITRE cut possible DG (infinitely digital) -Halbautomat hydraulic clamp and lift -with coolant pump with Mikrosprüheinrichtung -Weight: approx. 1200kg Power -stufenlose speed control more

Año de construcción: usado
Ubicación: D-74889 Sinsheim
Vendedor: Frech GmbH

sheet width - max.: 0440 - 510 mm coil weight: 1,00 t coil internal dia.: 440 - 520 mm coil outside - diam. ca.: 1800 mm back length without arms: 500 mm total power requirement: kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,50 x 1,20 x 1,70 m - without motor - 6 arms - brake is mecanical - sheet width without arm 510 mm - sheet width with 1 arm 470 mm more

Año de construcción: usado
Precio: 290.000 €
Ubicación: Land-de DE 04356 Leipzig, Am alten Flughafen 1
Vendedor: Regalux GmbH

We offer an automated small part storages AKL Mecalux manufacturer's for sale. The plant has been completely dismantled, certainly prepared for transport and is available at any time. Value of a new asset is â?¬900,000. The offered was only about 2 years in operation. Our company offers you a full range of services. We design, deliver and assemble the equipment according to predetermined customer needs. We operate all over Europe. Our team speaks german, English, French, Russian and Polish. Like to speak to us. It is an automated small parts warehouse consisting of from pallet racks, flow racks, Pack courts and conveyor systems. Flow racks have 4 LagerebenePalettenregale h ... more

Año de construcción: 1988
Ubicación: Land-DE Germany, 74219 Möckmühl-Züttlingen
Vendedor: EKW Werkzeugmaschinen AG & Co. KG

sheet width: 4040 mm plate thickness: 10 mm distance between columns: 4100 mm column arm: 60 mm main drive: 22 kW total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: 4,3 x 2,5 x 1,82 m motorized adjustable backstop cutting width and cutting angle adjustment front side stop for right-angled cuts 3 front sheet support arms foot switch continuous cutting length adjustment single stroke table with roller balls for easy moving of sheets more

Año de construcción: 2003
Ubicación: Land-de DE 52070 Aachen, Jülicher Str. 336
Vendedor: EuropNet GmbH

Year: 2003 Control unit: MC4 Injection Unit: .../1000 Screw diameter: 55 mm Injection pressure: 1904 bar Injection volume: 523 ccm Shot capacity: 476 g Clamping Unit: 200/... Clamping force: 200 t Platen size: 915 x 910 mm Distance between tie bars: 560 x 560 mm Mould height: 350 mm Opening storke: 700 mm Max.Daylight: 1050 mm Ejector stroke: 200 mm Drive power of the hydraulic pump: 37 kW Cylinder heating power: 18 kW General information: Delivery time: November Machine dimensions(m) LxWxH: 5,35x 1,90 x 2,25 m Weight: 10550 kg Equipment: - 1 x Pneumatic valve - 1 x Core pulls - Quality package - Increased oil cooler - Mecanic interface Eur ... more

Año de construcción: usado
Ubicación: Werk
Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm control: DELEM DA 66 T column arm: 410 mm ram stroke speed: 140 mm/sec working feed: 11 mm/sec dayligth: 550 mm table height: 900 mm table width: 160 mm oil volume: 300 l work stroke: 275 mm weight of the machine ca.: 14.000 kg dimensions of the machine ca.: 5150 x 2250 x 3000 mm Domestic equipments: - DELEM - CNC control model DA 66 T with touch screen control 2D graphical touchscreen programming mode 3D representation in simulation and production - supported axes: Y1 - Y2 - X - Z1 - Z2 and R axes as well as CNC crowning ( C-axis) - controlled back gauge X-axis = 800 mm R-axis = 250 mm via ballscrew - Quick change sta ... more

Año de construcción: 2002
Ubicación: Land-de DE 08018 Kaiserslautern, Trippstadter Str. 110
Vendedor: GINDUMAC GmbH

OVERVIEW: Brand: Gildemesiter Model: GD 20 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2002 Production hours: 77909 Location: Germany Origin country: Italy GENERAL DATA: Measurements width: 2100 mm Measurements depth: 1100 mm Measurements height: 1680 mm Machine weight: 1850 kg MAIN DRIVE: Number of spindles: 1 Spindle speed range: 8000 1/min CONTROL UNIT: Brand: FANUC Model: 18i-T CNC main language: German CNC language customizable: yes MOVEMENT: X-AXIS movement: 85 mm Y-AXIS movement: 150 mm Z-AXIS movement: 150 mm WORKPIECE Bar holder length: 4690 mm MEDIA: Main electronic connection: 400 V Power co ... more

Año de construcción: usado
Ubicación: Land-NL Netherlands, 09155 Babberich
Vendedor: Mach4metal

Sheet thickness: 6,00 mm void: 0 Table length: 3050 mm Table width: 0 mm Knife length: 0 mm MACH-id   4007 MAKE        Amada Promecam TYPE         GPX 630 YEAR        1992 SPECIFICATIONS Controll      Conventionel Guillotine / Lazer / Cutting table       Guillotine Cutting lenght      3050 mm Maximum sheet thickness     6 mm Backgauge stroke X in mm     1000 mm Power resonator kW / Amp    5.5 kW DIMENSIONS Length     3600 mm Width      2200 mm Height     2 ... more

Año de construcción: 1994
Ubicación: Land-de DE 34134 Kassel, Silberbornstr. 2 c
Vendedor: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.

gebr. Pneum.. Multi function punch make ALL MECANIC Model 992.963 year 1994 With die-cutting tool 992.808 Projection 125 mm Stroke 25 mm Table 320 x 200 mm Mould installation height 140 mm Operating pressure 6-7 bar External dimensions: Width: 300 mm Depth 420 mm Height 490 mm Weight approx. 80 kg With foot switch more

Año de construcción: 2015
Precio: 88.500 EU?
Ubicación: Land-pl PL
Vendedor: Kennedy Machines

The machine is designed for earthworks, it is used for separation spoil from the ground and transfer to means of transport or on landfill site. more

Año de construcción: 2009
Ubicación: Land-de DE 34134 Kassel, Silberbornstr. 2 c
Vendedor: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.

gebr. Pneum.. Stamping frame make ALL MECANIC Model 994597 year 2009 With die-cutting tool 994.595 for corner joining and push connector perforation Rung and subframes, for cylindrical and taper pins With die-cutting tool 996.090 for corner connector holes in frame and outer frame, for cylindrical and taper pins External dimensions: Width 350/780 mm Depth 400/760 mm 500/1400 mm With foot switch more

Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-it IT Italy, 21027 Ispra
Vendedor: Surplex GmbH

Weight approx.: 500 kg Dimensions (l x w x h) approx.: 2600 x 1000 x 1600 mm Description: Lot composed of various machines for aluminum processing, see photos more

Año de construcción: 1997
Ubicación: Land-de DE 73525 Schwäbisch Gmünd , Eutighofer Str. 144a
Vendedor: IDS Trade GmbH
Año de construcción: 2009
Precio: used machinery auction RESALE 79.500 €
Ubicación: Land-ch CH Switzerland, 8353 Elgg
Vendedor: Surplex GmbH

Weight approx.: 48000 kg Dimensions (l x w x h) approx.: 11200 x 2500 x 2950 mm Description: FREMA 2009 Planer-Separator - 9 working spindles - working width 30 - 330 mm - working height 10 - 160 mm - average cutting circle 180 - 260 mm - average cutting circle of cross-cut 300 - 450 mm - cut-off height max. 150 mm - feed speed 20 - 250 m/ min - 400 V, 50 Hz - motors / electrical equipment SIEMENS/ Telemecanique - control system SPS Schneider M340 Spindle arrangement and motor power as follows: - feeding unit with motor 90 kW - frequency inverter - feed speed infinitely variable 20 - 250 m/ min - average feed rollers: 300 mm - lower spindle (surface cutterhead) 55 kW - upper spindle (thickn ... more

Año de construcción: 1999
Ubicación: Land-at AT 5580 Tamsweg ( Salzburg ) / Austria // Europe, Nr. 31
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools

HURCO BAZ vertical mod. BMC 64 / 99 / xyz: 1625-864-762 / cnc Ultimax 4 / magazine 24 seats / 8,000 rpm / SK 40 / 1676 x 889 table internal cooling / conveyors / DXF / RENISHAW measuring sensor / 3D programming pocket with islands of direct Threading / / good condition fe.gi .Maschinen.SBG.at HURCO vertical machining center mod. BMC 64 / year 99 / xyz: 1625-864-762 / cnc Ultimax 4 / 24 tools / 8.000 rpm magazine. / SK 40 / table 1676 x 889 / internal cooling / chip conveyor / DXF / RENISHAW probe / 3D programming / threading pocktes with islands / direct / good condition Fe.gi.Maschinen.SBG.at more

Año de construcción: 2014
Precio: used machinery auction RESALE 38.000 €
Ubicación: Land-de DE Germany, 85716 Unterschleißheim
Vendedor: Surplex GmbH

Weight approx.: 14000 kg Dimensions (l x w x h) approx.: 5040 x 1300 x 2800 mm Description: - Serial number: 21291 - Pressure force: 240 t - Bending length: 4100 mm - Stroke: 260 mm - Motor power: 22kW - Voltage: 400 V - Oil tank contents: 210 L - Distance between uprights: 3550 mm - Installation height: 530 mm - Outreach: 410 mm - Table height: 885 mm - Table width 240 mm - Operating hours: 4153 h Accessories: Y1 / Y2 / X / R via CNC-controlled control Delem DA-66 T Tool clamping Promecam manual on top Tool clamping manual at the bottom (die block holder) Fiessler safety device Safety doors Crowning motor-driven Die adjustment manual Tools: 1 x Divided upper tool type 11.230, R=0.8/85°,  ... more

Año de construcción: 2001
Ubicación: Land-at AT 5580 Tamsweg ( Salzburg ) / Austria // Europe, Nr. 31
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools

HURCO BAZ vertical mod. VMX 30 / 2001 / xyz: 760-510-610 / cnc Ultimax 4 / Magazine 30 places / SK 40 / 10,000 rpm / 1020 x 510 table / table burden 1130 kg / internal cooling / conveyors / DXF / RENISHAW measuring sensor / 3D programming / bags with Islands / direct Gewindeschne iDEN / good condition Fe.gi.Maschinen.SBG.at HURCO vertical machining center mod VMX 30 / year 2001 / xyz: 760-510-610 / cnc Ultimax 4 / magazine 30 tools / sk 40 / 10,000 rpm. / table 1020 x 510 / table load 1130 kg / internal cooling / chip conveyor / DXF / RENISHAW probe / 3D programming / pockets with islands / direct threading / good condition Fe.gi.Maschinen.SBG.at more

Año de construcción: usado
Precio: 1.455 €
Ubicación: Land-de DE 26215 Wiefelstede, Germany
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 4.100 €
Ubicación: Land-de DE 33335 Gütersloh, Anemonenweg 8
Vendedor: Venker Werkzeugmaschinen GmbH

Saw length: 6000 mm Maximum blade diameter: 450 mm Automatic positioning on Deman control sawdust at two units more

Año de construcción: 2006
Precio: used machinery auction RESALE 1.000 €
Ubicación: Land-es ES Spain, 20570 Bergara
Vendedor: Surplex GmbH

Weight approx.: 550 kg Dimensions (l x w x h) approx.: 1400 x 1000 x 2400 mm Description: Table measures 510x550 mm. more

Año de construcción: usado
Ubicación: Land-fr FR
Vendedor: CNC Management Ltd

Make: Famup Model: MCX650 CNC Vertical Machining Centre Year: 1993 Condition: Used Machine type: Mill Location of machine: France Machine Details Year of manufacture: 1993, Control: Fanuc OM, Table size: 1300 x 420 mm, X-Axis: 1000 mm, Y-Axis: 420 mm, Z-Axis: 470 mm, Spindle Taper: ISO 40, Spindle Speed (maximum): 4500 rpm, Spindle motor: 11.5kW, Auto Tool Changer (ATC): 24 positions, more

Año de construcción: 1980
Ubicación: Leipzig 2
Vendedor: WMW AG

pressure: 80 t,chamfer lenght: 3000 mm,distance between columns: 2550 mm,throat: 410 mm,dayligth: ca.300 mm,stroke: ca. 100 mm,back gauge - adjustable: ca. 250 Handkurbel mm,total power requirement: 15 kW,weight of the machine ca.: 5,0 t,dimensions of machine: 3,5x1,6x2,3 m,transport dimensions LxWxH: 3,5 x 1,6 x 2,3 m,- sheet thickness with gap width 40mm+V bending= approx. 8mm accessories: 1 set pressbrake tools last check accorrding German law UVV (Accident prevention regulations) 09/2010 machine can be demonstrated under power more

Año de construcción: usado
Ubicación: 32683 Barntrup, Am Betonwerk 15
Vendedor: FWB-Maschinenhandel GmbH

CNC machining center Weeke type BP 05 Built in 1994 Working area x 2500 mm, Y Z 650 mm up to 50 mm gearbox with 10 individually retrievable spindles Drill diameter up to 35 mm 2 horizontal spindles in the x direction 1 upper milling unit with 2.5 kW console table with 6 beams Vacuum clamping device Weight approx. 2500 kg machine in good and demonstration-ready condition type tool including more

Año de construcción: usado
Ubicación: Land-NL Netherlands, 09155 Babberich
Vendedor: Mach4metal

Sheet thickness: 12,00 mm void: 0 Table length: 3050 mm Table width: 0 mm Knife length: 0 mm MACH-id   3984 MAKE    Amada Promecam TYPE      GX 1230 YEAR     1999 SPECIFICATIONS Guillotine / Lazer / Cutting table    Guillotine Cutting lenght    3050 mm Maximum sheet thickness   12 mm Backgauge stroke X in mm    1000 mm DIMENSIONS Length    3850 mm Width     2380 mm Height      2040 mm   more

Año de construcción: 2000
Ubicación: 86971 Peiting, Zechenstr. 10
Vendedor: CNC Bote Johann Demmel

Built in 2000 Control Siemens 810 d ShopMill Traverse paths x 500 mm Y 350 mm Z 450 mm Hours of operation 4.900 h Work spindle 6,000 rpm 16 x tool changer Tool holder BT40 Weight approx. 4,300 kg 4-axis rotary table Glass scales for all three axes air more

Año de construcción: usado
Ubicación: Land-de Germany, 32469 Petershagen
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MECA types: