20 ofertas

Año de construcción: usado
Precio: 595 €
Ubicación: Land-technical data:

mennekes 75221

200 v / 400vac

4-pin

protection class ip 67

more technical data please take the nameplate

an invoice is created for you.

the vat id according to ⧠25a vat act does not apply. TECHNICAL DATA: MENNEKES 75221 200 V / 400VAC 4-PIN PROTECTION CLASS IP 67 MORE TECHNICAL DATA PLEASE TAKE THE NAMEPLATE AN INVOICE IS CREATED FOR YOU. THE VAT ID ACCORDING TO § 25A VAT ACT DOES NOT APPLY.
Vendedor: Fa. Schönknecht
Año de construcción: usado
Ubicación: Land-technical data sorting line<br/>manufacturer  ludden & mennekes entsorgungs-systeme gmbh<br/>typ paper/cardbord sorting line<br/>year of construction 2002<br/>throughput capacity 3 up to 6 tons/hour<br/><br/>pos. 01 feed chain belt conveyor, underfloor<br/>manufacturer ludden & mennekes<br/>type kgf 1400  <br/>feeding belt approx. 5,000 mm<br/>ascending conveyor approx. 13,500 mm<br/>belt width 1,400 mm<br/>effective width 1,330 mm<br/>side wall height 800 mm<br/>gradient 30° <br/>pit dimensions 11,950 x 2,100 x 1,500 mm (l x w x d)<br/><br/>pos. 03 dosing reel, <br/>mounting above the ascending conveyor pos. 02<br/>counter-rotating dosing reel including support and sidewall increase<br/>pipe diameter 700 mm<br/>drivers 150 x 15 mm<br/>drive power 4 kw<br/><br/>pos. 04 disc sieve coarse, <br/>material flow from infeed belt pos. 01 to discharge belt oversized grain pos. 05<br/>15 axles with elliptical plastic discs in various sizes<br/>sieve length 4,877 mm<br/>wire width 1,360 mm<br/>side panel height 750 mm<br/>sieving capacity 7 to 10 t/hour<br/>drive power 4 kw<br/>speed 67 rpm, infinitely variable by frequency converter<br/>gradient 16°<br/><br/>pos. 05 sliding belt conveyor, discharge belt oversized grain (cardboard) from disc screen pos. 04 on stockpile<br/>manufacturer ludden & mennekes<br/>type ggf 1400  <br/>centre distance 4,500 mm<br/>overall width 1,514 mm<br/>belt width 1,400 mm<br/>effective width 1,330 mm<br/>side wall height 500 mm<br/>gradient 0°<br/><br/>pos. 06 sliding belt conveyor ascending belt from disc screen pos. 04 to disc screen fine pos. 08<br/>manufacturer ludden & mennekes<br/>type ggf 1400  <br/>centre distance 9,700 mm<br/>overall width 1,514 mm<br/>belt width 1,400 mm<br/>effective width 1,330 mm<br/>gradient 20°<br/><br/>pos. 08 disc sieve fine <br/>12 axles with elliptical plastic discs in various sizes<br/>gradient 16°<br/><br/>pos. 09 discharge belt undersize grain (paper), sliding belt conveyor from disc screen pos. 08 on stockpile<br/>manufacturer ludden & mennekes<br/>type ggf 1400  <br/>centre distance 4.500 mm<br/>width 1.330 mm<br/>effective width 1,200 mm<br/><br/>pos. 10 sorting belt from discharge belt pos. 09<br/>manufacturer avermann <br/>type ggf 1400  <br/>centre distance 16,350 mm<br/>effective width 1,200 mm<br/>conveying speed 6 - 24 m/min.<br/>distance between idler rollers 500 mm<br/><br/>pos. 11 belt overflow from sorting belt<br/>manufacturer avermann <br/>type ggf 1000  <br/>centre distance 4.000 mm<br/>effective width 1.000 mm<br/>conveying speed 24 m/min.<br/><br/>comments:<br/>the plant is currently still built, but is no longer in operation. an inspection is possible by appointment. <br/><br/>dismantling and loading is the responsibility of the buyer. we will not assume liability for the given technical data and possible errors. TECHNICAL DATA SORTING LINE
MANUFACTURER LUDDEN & MENNEKES ENTSORGUNGS-SYSTEME GMBH
TYP PAPER/CARDBORD SORTING LINE
YEAR OF CONSTRUCTION 2002
THROUGHPUT CAPACITY 3 UP TO 6 TONS/HOUR

POS. 01 FEED CHAIN BELT CONVEYOR, UNDERFLOOR
MANUFACTURER LUDDEN & MENNEKES
TYPE KGF 1400
FEEDING BELT APPROX. 5,000 MM
ASCENDING CONVEYOR APPROX. 13,500 MM
BELT WIDTH 1,400 MM
EFFECTIVE WIDTH 1,330 MM
SIDE WALL HEIGHT 800 MM
GRADIENT 30°
PIT DIMENSIONS 11,950 X 2,100 X 1,500 MM (L X W X D)

POS. 03 DOSING REEL,
MOUNTING ABOVE THE ASCENDING CONVEYOR POS. 02
COUNTER-ROTATING DOSING REEL INCLUDING SUPPORT AND SIDEWALL INCREASE
PIPE DIAMETER 700 MM
DRIVERS 150 X 15 MM
DRIVE POWER 4 KW

POS. 04 DISC SIEVE COARSE,
MATERIAL FLOW FROM INFEED BELT POS. 01 TO DISCHARGE BELT OVERSIZED GRAIN POS. 05
15 AXLES WITH ELLIPTICAL PLASTIC DISCS IN VARIOUS SIZES
SIEVE LENGTH 4,877 MM
WIRE WIDTH 1,360 MM
SIDE PANEL HEIGHT 750 MM
SIEVING CAPACITY 7 TO 10 T/HOUR
DRIVE POWER 4 KW
SPEED 67 RPM, INFINITELY VARIABLE BY FREQUENCY CONVERTER
GRADIENT 16°

POS. 05 SLIDING BELT CONVEYOR, DISCHARGE BELT OVERSIZED GRAIN (CARDBOARD) FROM DISC SCREEN POS. 04 ON STOCKPILE
MANUFACTURER LUDDEN & MENNEKES
TYPE GGF 1400
CENTRE DISTANCE 4,500 MM
OVERALL WIDTH 1,514 MM
BELT WIDTH 1,400 MM
EFFECTIVE WIDTH 1,330 MM
SIDE WALL HEIGHT 500 MM
GRADIENT 0°

POS. 06 SLIDING BELT CONVEYOR ASCENDING BELT FROM DISC SCREEN POS. 04 TO DISC SCREEN FINE POS. 08
MANUFACTURER LUDDEN & MENNEKES
TYPE GGF 1400
CENTRE DISTANCE 9,700 MM
OVERALL WIDTH 1,514 MM
BELT WIDTH 1,400 MM
EFFECTIVE WIDTH 1,330 MM
GRADIENT 20°

POS. 08 DISC SIEVE FINE
12 AXLES WITH ELLIPTICAL PLASTIC DISCS IN VARIOUS SIZES
GRADIENT 16°

POS. 09 DISCHARGE BELT UNDERSIZE GRAIN (PAPER), SLIDING BELT CONVEYOR FROM DISC SCREEN POS. 08 ON STOCKPILE
MANUFACTURER LUDDEN & MENNEKES
TYPE GGF 1400
CENTRE DISTANCE 4.500 MM
WIDTH 1.330 MM
EFFECTIVE WIDTH 1,200 MM

POS. 10 SORTING BELT FROM DISCHARGE BELT POS. 09
MANUFACTURER AVERMANN
TYPE GGF 1400
CENTRE DISTANCE 16,350 MM
EFFECTIVE WIDTH 1,200 MM
CONVEYING SPEED 6 - 24 M/MIN.
DISTANCE BETWEEN IDLER ROLLERS 500 MM

POS. 11 BELT OVERFLOW FROM SORTING BELT
MANUFACTURER AVERMANN
TYPE GGF 1000
CENTRE DISTANCE 4.000 MM
EFFECTIVE WIDTH 1.000 MM
CONVEYING SPEED 24 M/MIN.

COMMENTS:
THE PLANT IS CURRENTLY STILL BUILT, BUT IS NO LONGER IN OPERATION. AN INSPECTION IS POSSIBLE BY APPOINTMENT.

DISMANTLING AND LOADING IS THE RESPONSIBILITY OF THE BUYER. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-extraction and disposal systems for dust, chips and production waste<br><br>kraemer extraction and fine dust filter with ruf briquetting machine <br>from age 2006<br>(if required also with piping) <br><br>and <br><br>ludden & mennekes container press-system age 2006 <br><br>consists of <br><br>1 container press-system l&m pc 6000 with tilting device for moveable containers<br>for storing and compression of residual material and reycling material by compression device.<br><br>this allows optimal utilisation at the vehicle loading.<br><br>capacity of the container: 30 m3<br>clear length 600cm<br>length of the container 650cm<br><br><br>2 pc. containers <br>capacity of the container: 30 m3<br>clear length 600cm<br>length of the container 650cm<br><br><br>the system was used formerly on two cutting lines and two three-knife trimmers<br>from a saddle stitcher and adhesive binder.<br>; good EXTRACTION AND DISPOSAL SYSTEMS FOR DUST, CHIPS AND PRODUCTION WASTE

KRAEMER EXTRACTION AND FINE DUST FILTER WITH RUF BRIQUETTING MACHINE
FROM AGE 2006
(IF REQUIRED ALSO WITH PIPING)

AND

LUDDEN & MENNEKES CONTAINER PRESS-SYSTEM AGE 2006

CONSISTS OF

1 CONTAINER PRESS-SYSTEM L&M PC 6000 WITH TILTING DEVICE FOR MOVEABLE CONTAINERS
FOR STORING AND COMPRESSION OF RESIDUAL MATERIAL AND REYCLING MATERIAL BY COMPRESSION DEVICE.

THIS ALLOWS OPTIMAL UTILISATION AT THE VEHICLE LOADING.

CAPACITY OF THE CONTAINER: 30 M3
CLEAR LENGTH 600CM
LENGTH OF THE CONTAINER 650CM


2 PC. CONTAINERS
CAPACITY OF THE CONTAINER: 30 M3
CLEAR LENGTH 600CM
LENGTH OF THE CONTAINER 650CM


THE SYSTEM WAS USED FORMERLY ON TWO CUTTING LINES AND TWO THREE-KNIFE TRIMMERS
FROM A SADDLE STITCHER AND ADHESIVE BINDER.
; GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-vibratory feeder<br>diameter range 3-8 mm<br>shaft length under head 80 mm<br>max. thread length 58 mm<br>output - pieces/min 480<br><h2><a href= VIBRATORY FEEDER
DIAMETER RANGE 3-8 MM
SHAFT LENGTH UNDER HEAD 80 MM
MAX. THREAD LENGTH 58 MM
OUTPUT - PIECES/MIN 480

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-press containers<br>our coupling containers, also called press containers (pc), serve for collecting and transport of compacted residual materials and recyclable raw materials.; verry good PRESS CONTAINERS
OUR COUPLING CONTAINERS, ALSO CALLED PRESS CONTAINERS (PC), SERVE FOR COLLECTING AND TRANSPORT OF COMPACTED RESIDUAL MATERIALS AND RECYCLABLE RAW MATERIALS.; VERRY GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-vibratory feeder<br>diameter range 5-10 mm<br>shaft length under head 105 mm<br>max. thread length 63 mm<br>output pieces/min 250<br><h2><a href= VIBRATORY FEEDER
DIAMETER RANGE 5-10 MM
SHAFT LENGTH UNDER HEAD 105 MM
MAX. THREAD LENGTH 63 MM
OUTPUT PIECES/MIN 250

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-stationary compaction equipment of manufacturer ludden and mennekes.
type: stv 10,000
fill space without cone about 10 cbm
bu. 2004
little used, make way for a new installation.
including control and switch cabinet. documentation and diagrams complete available.
the press has been converted to manual control and is fully functional.

at the time new price: 320.000 euro;

 STATIONARY COMPACTION EQUIPMENT OF MANUFACTURER LUDDEN AND MENNEKES. TYPE: STV 10,000 FILL SPACE WITHOUT CONE ABOUT 10 CBM BU. 2004 LITTLE USED, MAKE WAY FOR A NEW INSTALLATION. INCLUDING CONTROL AND SWITCH CABINET. DOCUMENTATION AND DIAGRAMS COMPLETE AVAILABLE. THE PRESS HAS BEEN CONVERTED TO MANUAL CONTROL AND IS FULLY FUNCTIONAL. AT THE TIME NEW PRICE: 320.000 EURO;
Vendedor: Helector Recyclingcenter Osnabrück GmbH
Año de construcción: usado
Ubicación: Land-diameter range 3-8 mm<br>shaft length under head 100 mm<br>max. thread length 55 mm<br>output pieces/min 90-300<br><h2><a href= DIAMETER RANGE 3-8 MM
SHAFT LENGTH UNDER HEAD 100 MM
MAX. THREAD LENGTH 55 MM
OUTPUT PIECES/MIN 90-300

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-makes: hilgeland / ew menn / ingramatic


diameter ranges 1mm - 20mm








   MAKES: HILGELAND / EW MENN / INGRAMATIC DIAMETER RANGES 1MM - 20MM
Vendedor: Helmut Steinfels GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-very good condition<br>diameter range 0,8- 3 mm<br>shaft length under head 25 mm<br>max. thread length 20 mm<br>output pieces/min 250-1000<br><h2><a href= VERY GOOD CONDITION
DIAMETER RANGE 0,8- 3 MM
SHAFT LENGTH UNDER HEAD 25 MM
MAX. THREAD LENGTH 20 MM
OUTPUT PIECES/MIN 250-1000

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-vibratory feeder<br>diameter range 0,5- 3 mm<br>shaft length under head 25 mm<br>max. thread length 20 mm<br>output pieces/min 250-1000<br><h2><a href= VIBRATORY FEEDER
DIAMETER RANGE 0,5- 3 MM
SHAFT LENGTH UNDER HEAD 25 MM
MAX. THREAD LENGTH 20 MM
OUTPUT PIECES/MIN 250-1000

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-vibratory feeder<br>diameter range 0,8- 3 mm<br>shaft length under head 25 mm<br>max. thread length 20 mm<br>output pieces/min 250-1000<br><h2><a href= VIBRATORY FEEDER
DIAMETER RANGE 0,8- 3 MM
SHAFT LENGTH UNDER HEAD 25 MM
MAX. THREAD LENGTH 20 MM
OUTPUT PIECES/MIN 250-1000

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-vibratory feeder<br>diameter range 3-8 mm<br>shaft length under head 25-120 mm<br>max. thread length 60 mm<br>output pieces/min 180<br><h2><a href= VIBRATORY FEEDER
DIAMETER RANGE 3-8 MM
SHAFT LENGTH UNDER HEAD 25-120 MM
MAX. THREAD LENGTH 60 MM
OUTPUT PIECES/MIN 180

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-vibratory feeder<br>diameter range 3-8 mm<br>shaft length under head 25-120 mm<br>max. thread length 60 mm<br>output pieces/min 180<br><h2><a href= VIBRATORY FEEDER
DIAMETER RANGE 3-8 MM
SHAFT LENGTH UNDER HEAD 25-120 MM
MAX. THREAD LENGTH 60 MM
OUTPUT PIECES/MIN 180

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-vibratory feeder<br>diameter range 3-8 mm<br>shaft length under head 25-120 mm<br>max. thread length 60 mm<br>output pieces/min 180<br><h2><a href= VIBRATORY FEEDER
DIAMETER RANGE 3-8 MM
SHAFT LENGTH UNDER HEAD 25-120 MM
MAX. THREAD LENGTH 60 MM
OUTPUT PIECES/MIN 180

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-diameter range 1,7-10mm<br>shaft length under head 3-105 mm<br>output pieces/min 1850<br><h2><a href= DIAMETER RANGE 1,7-10MM
SHAFT LENGTH UNDER HEAD 3-105 MM
OUTPUT PIECES/MIN 1850

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-diameter range 8 mm<br>shaft length under head 100 mm<br>max. thread length 52 mm<br>output pieces/min 280<br><h2><a href= DIAMETER RANGE 8 MM
SHAFT LENGTH UNDER HEAD 100 MM
MAX. THREAD LENGTH 52 MM
OUTPUT PIECES/MIN 280

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-without vibratory feeder<br>diameter range 1,7-6 mm<br>shaft length under head 3-50 mm<br>output pieces/min 2000<br><h2><a href= WITHOUT VIBRATORY FEEDER
DIAMETER RANGE 1,7-6 MM
SHAFT LENGTH UNDER HEAD 3-50 MM
OUTPUT PIECES/MIN 2000

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-diameter range 3-8 mm<br>total screw length 100 mm<br>max. thread length 55 mm<br>output pieces/min 280<br><h2><a href= DIAMETER RANGE 3-8 MM
TOTAL SCREW LENGTH 100 MM
MAX. THREAD LENGTH 55 MM
OUTPUT PIECES/MIN 280

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-diameter range 3-8 mm<br>shaft length under head 100 mm<br>max. thread length 55 mm<br>output pieces/min 280<br><h2><a href= DIAMETER RANGE 3-8 MM
SHAFT LENGTH UNDER HEAD 100 MM
MAX. THREAD LENGTH 55 MM
OUTPUT PIECES/MIN 280

Vendedor: Helmut Steinfels GmbH & Co. KG

Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MENN types: