648 ofertas

Año de construcción: usado
Ubicación: Land-polar schneidemaschine 76 em, bj 1993, digitalprogramm, lufttisch, ersatzmesser,
sofort ab unser lager.  POLAR SCHNEIDEMASCHINE 76 EM, BJ 1993, DIGITALPROGRAMM, LUFTTISCH, ERSATZMESSER, SOFORT AB UNSER LAGER.
Vendedor: Drupatec
Año de construcción: usado
Precio: 1.022 htt
Ubicación: Land-1 1
Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-polar schneidemaschine 76 em, 1990,digitalprogramm,lufttisch, ersatzmesser
sofort ab unser lager.  POLAR SCHNEIDEMASCHINE 76 EM, 1990,DIGITALPROGRAMM,LUFTTISCH, ERSATZMESSER SOFORT AB UNSER LAGER.
Vendedor: Drupatec
Año de construcción: usado
Precio: used machinery auction RESALE 1.550 €
Ubicación: Land-weight approx.: 2600 kg<br/>dimensions (l x w x h) approx.: 5800 x 4000 x 1950 mm<br/>description: ? trennsäge für massivholzdielen, plattensäge<br> ? seriennummer 94<br> ? konzipiert zum länsschneiden von massivholzdielen<br> ? max. schnittlänge ca. 4000 mm<br> ? max. schnitthöhe ca. 130 mm<br> ? sägeblattdurchmesser 500 mm<br> ? hydraulikaggregat mit 3 kw motor<br> ? einlaufrollenförderer, nutzabmessungen 2450 x 650 mm<br> ? auslaufrollenförderer, nutzabmessungen 1550 x 660 mm<br> ? angetriebener bandförderer für abfallsammlung WEIGHT APPROX.: 2600 KG
DIMENSIONS (L X W X H) APPROX.: 5800 X 4000 X 1950 MM
DESCRIPTION: ? TRENNSäGE FüR MASSIVHOLZDIELEN, PLATTENSäGE
? SERIENNUMMER 94
? KONZIPIERT ZUM LäNSSCHNEIDEN VON MASSIVHOLZDIELEN
? MAX. SCHNITTLäNGE CA. 4000 MM
? MAX. SCHNITTHöHE CA. 130 MM
? SäGEBLATTDURCHMESSER 500 MM
? HYDRAULIKAGGREGAT MIT 3 KW MOTOR
? EINLAUFROLLENFöRDERER, NUTZABMESSUNGEN 2450 X 650 MM
? AUSLAUFROLLENFöRDERER, NUTZABMESSUNGEN 1550 X 660 MM
? ANGETRIEBENER BANDFöRDERER FüR ABFALLSAMMLUNG
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 9.250 €
Ubicación: Land-core d20a, lathe comes from a training workshop (total 3 machines are available of this type) state very well, with
guard / not cleaned off and glass scales and digital display of mitutoyo, central lubrication system, guided tours and refinished, dovetail guides at the flat after scraped, set games.
mechanics tested new, paint, chip wall back, chip tray below, guard with emergency off, tailstock, 3 jaw chuck, little water, chuck key, lighting
tip height 200 mm, centre distance 1000 mm, max.drehdurchmesser 600 mm, over bed 420 mm, over carriage bed width 260 mm, 300 mm,.
sale only to professionals
used, tested - so how you is, can be tested under power and visited
under exclusion of any warranty and guarantee there second-hand machine

free loading on trucks from location, shipment arrangement, placement and set up on request possible
available immediately CORE D20A, LATHE COMES FROM A TRAINING WORKSHOP (TOTAL 3 MACHINES ARE AVAILABLE OF THIS TYPE) STATE VERY WELL, WITH GUARD / NOT CLEANED OFF AND GLASS SCALES AND DIGITAL DISPLAY OF MITUTOYO, CENTRAL LUBRICATION SYSTEM, GUIDED TOURS AND REFINISHED, DOVETAIL GUIDES AT THE FLAT AFTER SCRAPED, SET GAMES. MECHANICS TESTED NEW, PAINT, CHIP WALL BACK, CHIP TRAY BELOW, GUARD WITH EMERGENCY OFF, TAILSTOCK, 3 JAW CHUCK, LITTLE WATER, CHUCK KEY, LIGHTING TIP HEIGHT 200 MM, CENTRE DISTANCE 1000 MM, MAX.DREHDURCHMESSER 600 MM, OVER BED 420 MM, OVER CARRIAGE BED WIDTH 260 MM, 300 MM,. SALE ONLY TO PROFESSIONALS USED, TESTED - SO HOW YOU IS, CAN BE TESTED UNDER POWER AND VISITED UNDER EXCLUSION OF ANY WARRANTY AND GUARANTEE THERE SECOND-HAND MACHINE FREE LOADING ON TRUCKS FROM LOCATION, SHIPMENT ARRANGEMENT, PLACEMENT AND SET UP ON REQUEST POSSIBLE AVAILABLE IMMEDIATELY
Vendedor: R.S.E cnc Maschinenservice
Año de construcción: usado
Ubicación: Land-automatic input, 2 speeds\r\n\r\ncategory: bakery machine\r\nsales of bakery machines used machines bakery resolution food machine reconditioned condition as it is new AUTOMATIC INPUT, 2 SPEEDS\R\N\R\NCATEGORY: BAKERY MACHINE\R\NSALES OF BAKERY MACHINES USED MACHINES BAKERY RESOLUTION FOOD MACHINE RECONDITIONED CONDITION AS IT IS NEW
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-year of construction: approx. 1985
maximum schweiã?lstg.: 500 amps.
machine weight: approx. 500 kg

equipment / accessories:

incl. water cooled torch
external wire feeder knife griesheim dvb 1
water cooling

all specifications were created after bestm knowledge and existing documents; expressly reserved by mistake.
every interested party can advance test under power the protective gas welding machine.
 YEAR OF CONSTRUCTION: APPROX. 1985 MAXIMUM SCHWEI&ATILDE;?LSTG.: 500 AMPS. MACHINE WEIGHT: APPROX. 500 KG EQUIPMENT / ACCESSORIES: INCL. WATER COOLED TORCH EXTERNAL WIRE FEEDER KNIFE GRIESHEIM DVB 1 WATER COOLING ALL SPECIFICATIONS WERE CREATED AFTER BESTM KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EVERY INTERESTED PARTY CAN ADVANCE TEST UNDER POWER THE PROTECTIVE GAS WELDING MACHINE.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-with hardened steel cone grinder, plastic housing\r\nspeed​​: 330 rpm, continuously adjustable from coarse to fine\r\ncapacity: flakes 250 g / min., finely grinding about 220 g / min.\r\nall cereals and oilseeds, dry herbs and spices:\r\n WITH HARDENED STEEL CONE GRINDER, PLASTIC HOUSING\R\NSPEED​​: 330 RPM, CONTINUOUSLY ADJUSTABLE FROM COARSE TO FINE\R\NCAPACITY: FLAKES 250 G / MIN., FINELY GRINDING ABOUT 220 G / MIN.\R\NALL CEREALS AND OILSEEDS, DRY HERBS AND SPICES:\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-2 x cutting mill alpine augsburg: rotor dimensions: 40 x 100 mm open rotor, 5 rotor blade & 3 stator, drive 45 kw. 

1 x cutting mill alpine augsburg: rotor dimensions: 40 x 63 mm open rotor, 5 rotor blade & 3 stator, drive 30 kw.

1 x cutting mill condux: rotor dimensions: 45 x 60 mm open rotor, 3 rotor blade & 2 statormesser bevel cut, drive 30 kw.

1 x ver recorded fine impact mill alpine augsburg upz 400: drive 37 kw 1 x zig-zag separator alpine augsburg: fan 8.5 kw 2 X CUTTING MILL ALPINE AUGSBURG: ROTOR DIMENSIONS: 40 X 100 MM OPEN ROTOR, 5 ROTOR BLADE & 3 STATOR, DRIVE 45 KW. 1 X CUTTING MILL ALPINE AUGSBURG: ROTOR DIMENSIONS: 40 X 63 MM OPEN ROTOR, 5 ROTOR BLADE & 3 STATOR, DRIVE 30 KW. 1 X CUTTING MILL CONDUX: ROTOR DIMENSIONS: 45 X 60 MM OPEN ROTOR, 3 ROTOR BLADE & 2 STATORMESSER BEVEL CUT, DRIVE 30 KW. 1 X VER RECORDED FINE IMPACT MILL ALPINE AUGSBURG UPZ 400: DRIVE 37 KW 1 X ZIG-ZAG SEPARATOR ALPINE AUGSBURG: FAN 8.5 KW
Vendedor: Herr Karl Neigert
Año de construcción: usado
Ubicación: Land-for all slicer types, f.e. wabaema, jac, vlb, heristal, maho, daub, renove, kalmeyer, delta etc.\r\nbig quantities are also available\r\nplease contact us for further details. FOR ALL SLICER TYPES, F.E. WABAEMA, JAC, VLB, HERISTAL, MAHO, DAUB, RENOVE, KALMEYER, DELTA ETC.\R\NBIG QUANTITIES ARE ALSO AVAILABLE\R\NPLEASE CONTACT US FOR FURTHER DETAILS.
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-2 x cutting mill alpine augsburg: rotor dimensions: 40 x 100 mm open rotor, 5 rotor blade & 3 stator, drive 45 kw. 

1 x cutting mill alpine augsburg: rotor dimensions: 40 x 63 mm open rotor, 5 rotor blade & 3 stator, drive 30 kw.

1 x cutting mill condux: rotor dimensions: 45 x 60 mm open rotor, 3 rotor blade & 2 statormesser bevel cut, drive 30 kw.

1 x ver recorded fine impact mill alpine augsburg upz 400: drive 37 kw 1 x zig-zag separator alpine augsburg: fan 8.5 kw  2 X CUTTING MILL ALPINE AUGSBURG: ROTOR DIMENSIONS: 40 X 100 MM OPEN ROTOR, 5 ROTOR BLADE & 3 STATOR, DRIVE 45 KW. 1 X CUTTING MILL ALPINE AUGSBURG: ROTOR DIMENSIONS: 40 X 63 MM OPEN ROTOR, 5 ROTOR BLADE & 3 STATOR, DRIVE 30 KW. 1 X CUTTING MILL CONDUX: ROTOR DIMENSIONS: 45 X 60 MM OPEN ROTOR, 3 ROTOR BLADE & 2 STATORMESSER BEVEL CUT, DRIVE 30 KW. 1 X VER RECORDED FINE IMPACT MILL ALPINE AUGSBURG UPZ 400: DRIVE 37 KW 1 X ZIG-ZAG SEPARATOR ALPINE AUGSBURG: FAN 8.5 KW
Vendedor: Herr Karl Neigert
Año de construcción: usado
Ubicación: Land-turning diameter: 305 mm<br/>turning length: 477 mm<br/>control: winmax <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>winmax cnc control<br/>3-jaw chuck<br/>12 fold turret head<br/>tool presetting device<br/>tailstock<br/>chip conveyor<br/>coolant device<br/><br/>technische daten / technical details:<br/>max. drehdurchmesser / max. turning diameter    305    mm<br/>max. drehlänge / max. turning lenght    477    mm<br/>planweg (x) / cross way (x)    203    mm<br/>längsweg (z) / longitudinal way (z)    508    mm<br/>spindelbohrung / spindle hole    52    mm<br/>drehzahlbereich / spindle speed     4800    upm /rpm<br/>werkzeugrevolver / turret head    12    fach /holes<br/>eilgang x / rapid feed x    19    m/min<br/>eilgang z / rapid feed z    24    m/min.<br/>antriebsleistung spindel / drive capacity spindle    11    kw<br/>gewicht der maschine ca. / weight ca.    3800    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/> TURNING DIAMETER: 305 MM
TURNING LENGTH: 477 MM
CONTROL: WINMAX
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
WINMAX CNC CONTROL
3-JAW CHUCK
12 FOLD TURRET HEAD
TOOL PRESETTING DEVICE
TAILSTOCK
CHIP CONVEYOR
COOLANT DEVICE

TECHNISCHE DATEN / TECHNICAL DETAILS:
MAX. DREHDURCHMESSER / MAX. TURNING DIAMETER 305 MM
MAX. DREHLäNGE / MAX. TURNING LENGHT 477 MM
PLANWEG (X) / CROSS WAY (X) 203 MM
LäNGSWEG (Z) / LONGITUDINAL WAY (Z) 508 MM
SPINDELBOHRUNG / SPINDLE HOLE 52 MM
DREHZAHLBEREICH / SPINDLE SPEED 4800 UPM /RPM
WERKZEUGREVOLVER / TURRET HEAD 12 FACH /HOLES
EILGANG X / RAPID FEED X 19 M/MIN
EILGANG Z / RAPID FEED Z 24 M/MIN.
ANTRIEBSLEISTUNG SPINDEL / DRIVE CAPACITY SPINDLE 11 KW
GEWICHT DER MASCHINE CA. / WEIGHT CA. 3800 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.





Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-the cable peeling machine master 140 serves the peeling of underground cables, cables with steel reinforcement, cable with aluminium and lead reinforcement, as well as cables with pvc and rubber casing with a diameter of approx. 30 mm.die is 140 master with a massive two blade system for "breaking up" reinforced cable. both knives can be set separately on each required cutting depth. the machine is equipped with foot switch and is ce-konform.technische datendurchmesser cable: 30 mm to 140 mmtrenngeschwindigkeit: 12 m / minantrieb: 6 kw - 380 voltabmessungen: l 1.800 x b 1,000 x h 1.200 mm: 600 kganzahl knives: 2    THE CABLE PEELING MACHINE MASTER 140 SERVES THE PEELING OF UNDERGROUND CABLES, CABLES WITH STEEL REINFORCEMENT, CABLE WITH ALUMINIUM AND LEAD REINFORCEMENT, AS WELL AS CABLES WITH PVC AND RUBBER CASING WITH A DIAMETER OF APPROX. 30 MM.DIE IS 140 MASTER WITH A MASSIVE TWO BLADE SYSTEM FOR "BREAKING UP" REINFORCED CABLE. BOTH KNIVES CAN BE SET SEPARATELY ON EACH REQUIRED CUTTING DEPTH. THE MACHINE IS EQUIPPED WITH FOOT SWITCH AND IS CE-KONFORM.TECHNISCHE DATENDURCHMESSER CABLE: 30 MM TO 140 MMTRENNGESCHWINDIGKEIT: 12 M / MINANTRIEB: 6 KW - 380 VOLTABMESSUNGEN: L 1.800 X B 1,000 X H 1.200 MM: 600 KGANZAHL KNIVES: 2
Vendedor: AGICOM-Pedergnana OG
Año de construcción: usado
Ubicación: Land-workpiece length: 570 mm<br/>max. workpiece diameter: 235 mm<br/>weight of the machine ca.: 2,8 t<br/>dimensions of the machine ca.:  m<br/>max. grinding diameter:  mm<br/>total power requirement:  kw<br/>grinding length:  mm<br/>sinumerik 840d control<br/>5-axes (x, y, z, a, c)<br/>4-fold tool magazine for grinding quills<br/>support<br/>pick up loader with pallet carrier<br/><br/>technische daten: /technical details<br/>werkstückdurchmesser maximal / max. workpiece diameter    235    mm<br/>werkstücklänge maximal / max. workpiece lenght    570    mm<br/>spitzenhöhe über boden / center height over bottom    1100    mm<br/>verfahrweg x-achse längs / longitudinal travel x-axis    400    mm<br/>verfahrweg y-achse quer / cross travel y-axis    250    mm<br/>verfahrweg z-achse vertikal / vertical travel z-axis    250    mm<br/>vorschub / infeed    0,1-24000    mm<br/>a-achse werkstückdrehung / a-axis workpiece turning    unbegrenzt / unlimited   <br/> °<br/>drehzahl a-achse / speed of a-axis    0-200    upm / rpm<br/>c-achse schwenken schleifspindel / c-axis swivel grinding spindle    225    °<br/>schleifspindel drehzahl / grinding spindle speed    0-12000    upm / rpm<br/>schleifspindelaufnahme / grinding spindle taper    hsk 50e    mm<br/>antriebsleistung / drive capacity    25    kw<br/>gewicht der maschine ca. / weight    2800    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/><br/> WORKPIECE LENGTH: 570 MM
MAX. WORKPIECE DIAMETER: 235 MM
WEIGHT OF THE MACHINE CA.: 2,8 T
DIMENSIONS OF THE MACHINE CA.: M
MAX. GRINDING DIAMETER: MM
TOTAL POWER REQUIREMENT: KW
GRINDING LENGTH: MM
SINUMERIK 840D CONTROL
5-AXES (X, Y, Z, A, C)
4-FOLD TOOL MAGAZINE FOR GRINDING QUILLS
SUPPORT
PICK UP LOADER WITH PALLET CARRIER

TECHNISCHE DATEN: /TECHNICAL DETAILS
WERKSTüCKDURCHMESSER MAXIMAL / MAX. WORKPIECE DIAMETER 235 MM
WERKSTüCKLäNGE MAXIMAL / MAX. WORKPIECE LENGHT 570 MM
SPITZENHöHE üBER BODEN / CENTER HEIGHT OVER BOTTOM 1100 MM
VERFAHRWEG X-ACHSE LäNGS / LONGITUDINAL TRAVEL X-AXIS 400 MM
VERFAHRWEG Y-ACHSE QUER / CROSS TRAVEL Y-AXIS 250 MM
VERFAHRWEG Z-ACHSE VERTIKAL / VERTICAL TRAVEL Z-AXIS 250 MM
VORSCHUB / INFEED 0,1-24000 MM
A-ACHSE WERKSTüCKDREHUNG / A-AXIS WORKPIECE TURNING UNBEGRENZT / UNLIMITED
°
DREHZAHL A-ACHSE / SPEED OF A-AXIS 0-200 UPM / RPM
C-ACHSE SCHWENKEN SCHLEIFSPINDEL / C-AXIS SWIVEL GRINDING SPINDLE 225 °
SCHLEIFSPINDEL DREHZAHL / GRINDING SPINDLE SPEED 0-12000 UPM / RPM
SCHLEIFSPINDELAUFNAHME / GRINDING SPINDLE TAPER HSK 50E MM
ANTRIEBSLEISTUNG / DRIVE CAPACITY 25 KW
GEWICHT DER MASCHINE CA. / WEIGHT 2800 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.






Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-manufacturer mazak
year 2017
mazatrol smart control system
maximum swing diameter of 580 mm
chuck size 8"
bar passage 51 mm
centering spindle axis 1 020 mm
main spindle
max speed 4000 u / min
motor power 11.0 kw
maximum torque 131 nm
number of stations on the drum revolver 8
driver 25 mm
bohrstangenschaftdurchmesser max 32 mm
indexing time (a step) 0.20 s
rapid traverse (x) 30 m / min
rapid traverse (z axis) 30 m / min
range (x-axis) 140 mm
range (z axis) 305 mm
content of the cooling container 160 l
performance (30 minutes load) 20,16 kva
power consumption (continuous) 20.2 kva
accessories
transformer type
setting tools
ankerpads
8-position drum head (bolt type)
tool holder set
1,850 mm
1 500 mm wide
1 700 mm
weight 2 600 kg
including boss 552 hd iemca-drawer
guide channel diameter 13-52 mm
circle size. rods 5-51 mm
rod length 3000 mm (max. 3200)
max bar weight 55 kg
feed 750 mm / sec.
change 20 sek
voltage 400 v
control voltage 24 v dc
power 2 kw
air pressure 8 bar
weight 900 kg
the feeder is designed for connection to the cams lathes. MANUFACTURER MAZAK YEAR 2017 MAZATROL SMART CONTROL SYSTEM MAXIMUM SWING DIAMETER OF 580 MM CHUCK SIZE 8" BAR PASSAGE 51 MM CENTERING SPINDLE AXIS 1 020 MM MAIN SPINDLE MAX SPEED 4000 U / MIN MOTOR POWER 11.0 KW MAXIMUM TORQUE 131 NM NUMBER OF STATIONS ON THE DRUM REVOLVER 8 DRIVER 25 MM BOHRSTANGENSCHAFTDURCHMESSER MAX 32 MM INDEXING TIME (A STEP) 0.20 S RAPID TRAVERSE (X) 30 M / MIN RAPID TRAVERSE (Z AXIS) 30 M / MIN RANGE (X-AXIS) 140 MM RANGE (Z AXIS) 305 MM CONTENT OF THE COOLING CONTAINER 160 L PERFORMANCE (30 MINUTES LOAD) 20,16 KVA POWER CONSUMPTION (CONTINUOUS) 20.2 KVA ACCESSORIES TRANSFORMER TYPE SETTING TOOLS ANKERPADS 8-POSITION DRUM HEAD (BOLT TYPE) TOOL HOLDER SET 1,850 MM 1 500 MM WIDE 1 700 MM WEIGHT 2 600 KG INCLUDING BOSS 552 HD IEMCA-DRAWER GUIDE CHANNEL DIAMETER 13-52 MM CIRCLE SIZE. RODS 5-51 MM ROD LENGTH 3000 MM (MAX. 3200) MAX BAR WEIGHT 55 KG FEED 750 MM / SEC. CHANGE 20 SEK VOLTAGE 400 V CONTROL VOLTAGE 24 V DC POWER 2 KW AIR PRESSURE 8 BAR WEIGHT 900 KG THE FEEDER IS DESIGNED FOR CONNECTION TO THE CAMS LATHES.
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-x-travel: 885 mm<br/>y-travel: 600 mm<br/>z-travel: 600 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>cnc control heidenhain itnc530<br/>nc swivel head (b-axis)<br/>nc-rotary table (c-axis)<br/>automatic tool changer for 30 tools<br/>coolant through spindle (ikz)<br/>measuring feeler<br/>chip conveyor<br/><br/>technische daten / technical details:<br/>x-weg / x-travel    885    mm<br/>y-weg / y-travel    600    mm<br/>z-weg / z-travel    600    mm<br/>b-achse / b-axis    -10 - +110    °<br/>c-achse / c-axis    360    °<br/>spindelaufnahme / spindle taper    hsk 63    <br/>drehzahlbereich spindel / spindle speed    0-18000    upm /rpm<br/>vorschub / infeed    90    m/min<br/>nc-rundtischdurchmesser / nc-rotary table diameter    750    mm<br/>antriebsleistung / drive capacity spindle     60    kw<br/>gewicht der maschine ca. / weight    12000    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/><br/> X-TRAVEL: 885 MM
Y-TRAVEL: 600 MM
Z-TRAVEL: 600 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
CNC CONTROL HEIDENHAIN ITNC530
NC SWIVEL HEAD (B-AXIS)
NC-ROTARY TABLE (C-AXIS)
AUTOMATIC TOOL CHANGER FOR 30 TOOLS
COOLANT THROUGH SPINDLE (IKZ)
MEASURING FEELER
CHIP CONVEYOR

TECHNISCHE DATEN / TECHNICAL DETAILS:
X-WEG / X-TRAVEL 885 MM
Y-WEG / Y-TRAVEL 600 MM
Z-WEG / Z-TRAVEL 600 MM
B-ACHSE / B-AXIS -10 - +110 °
C-ACHSE / C-AXIS 360 °
SPINDELAUFNAHME / SPINDLE TAPER HSK 63
DREHZAHLBEREICH SPINDEL / SPINDLE SPEED 0-18000 UPM /RPM
VORSCHUB / INFEED 90 M/MIN
NC-RUNDTISCHDURCHMESSER / NC-ROTARY TABLE DIAMETER 750 MM
ANTRIEBSLEISTUNG / DRIVE CAPACITY SPINDLE 60 KW
GEWICHT DER MASCHINE CA. / WEIGHT 12000 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.






Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-produced: 1979
parameters: traverse: x: 1000 y: 1100 z: 1000 spindledurchmesser: 90 mm clamping table surface: 1000 x 1120 mm motor power: 7.5 kw machine dimensions: 3900 x 2500 x 2650 mm machine weight: 9000 kg accessories: digital sony PRODUCED: 1979 PARAMETERS: TRAVERSE: X: 1000 Y: 1100 Z: 1000 SPINDLEDURCHMESSER: 90 MM CLAMPING TABLE SURFACE: 1000 X 1120 MM MOTOR POWER: 7.5 KW MACHINE DIMENSIONS: 3900 X 2500 X 2650 MM MACHINE WEIGHT: 9000 KG ACCESSORIES: DIGITAL SONY
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-manufacturer: vecoplan  streifenhacker, year: ca.1998, number of rotors: 1, knife type: wendemesser, kw power rotor: ca.7,5, feeding roller: 2, kw power feeding roller: 0,75, hopper volume: ca.400 x 200, rotations u/min: ca.2500, feeding width mm: ca.400, year :ca.1998 MANUFACTURER: VECOPLAN STREIFENHACKER, YEAR: CA.1998, NUMBER OF ROTORS: 1, KNIFE TYPE: WENDEMESSER, KW POWER ROTOR: CA.7,5, FEEDING ROLLER: 2, KW POWER FEEDING ROLLER: 0,75, HOPPER VOLUME: CA.400 X 200, ROTATIONS U/MIN: CA.2500, FEEDING WIDTH MM: CA.400, YEAR :CA.1998
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: 5.700 €
Ubicación: Land-continuous drehzahlregelungnot schlagtasterhand turn switch for law linkslaufunterspannungsausloesertischhoehenverstellung on zahnstangebohrtiefenanschlag with feineinstellunganschlusskabel (1.5 m) with cee-steckerbohrschutz with electr. absicherungthermischer duration of overload protection/normalbohrleistung25/30 mmgewindeschneidleistung m20spindelmk iiibohrtiefe125 mmausladung280 mmsaeulendurchmesser110 mmnutzbare table area (b x l) (gradient-dependent) maximum 420 x 340 mmt-nutengroesseanzahl 2 , distance 125 mmabmessung breite13/26drehzahlanzeigeskalabohrtiefenanzeigeskalabohrtiefenanschlagmit feineinstellungtischhoehenverstellungmit zahnstangemotor three-phase 400 v polumschaltbar0, 90/1.45 kwspindeldrehzahlen with transmission, stepless 125-4000 1 /. minspindeldrehzahlen with stub shaft, 2 stufenstufe i 125-2000 1 / minstufe ii 250-4000 1 / less consonant gradation is made through riemenumlegungvorschub including electromagnetic kupplung0, 10/0.16/0.25 mm/umdr.spindel/tisch240-790 mmmaschinen dimensions (w x d x h) 520 x 820 x 1900 mmmaschinen dimension (with vp) (w x d x h) 637 x 1096 x 2120 mmgewicht300 kginklusive drilling package consisting: taper mandrel, chuck, vice and t - groove set. delivery: free house including verpackungnicht the right machine? we do also other afloat products - ask for a quote! * flott base partner *.  CONTINUOUS DREHZAHLREGELUNGNOT SCHLAGTASTERHAND TURN SWITCH FOR LAW LINKSLAUFUNTERSPANNUNGSAUSLOESERTISCHHOEHENVERSTELLUNG ON ZAHNSTANGEBOHRTIEFENANSCHLAG WITH FEINEINSTELLUNGANSCHLUSSKABEL (1.5 M) WITH CEE-STECKERBOHRSCHUTZ WITH ELECTR. ABSICHERUNGTHERMISCHER DURATION OF OVERLOAD PROTECTION/NORMALBOHRLEISTUNG25/30 MMGEWINDESCHNEIDLEISTUNG M20SPINDELMK IIIBOHRTIEFE125 MMAUSLADUNG280 MMSAEULENDURCHMESSER110 MMNUTZBARE TABLE AREA (B X L) (GRADIENT-DEPENDENT) MAXIMUM 420 X 340 MMT-NUTENGROESSEANZAHL 2 , DISTANCE 125 MMABMESSUNG BREITE13/26DREHZAHLANZEIGESKALABOHRTIEFENANZEIGESKALABOHRTIEFENANSCHLAGMIT FEINEINSTELLUNGTISCHHOEHENVERSTELLUNGMIT ZAHNSTANGEMOTOR THREE-PHASE 400 V POLUMSCHALTBAR0, 90/1.45 KWSPINDELDREHZAHLEN WITH TRANSMISSION, STEPLESS 125-4000 1 /. MINSPINDELDREHZAHLEN WITH STUB SHAFT, 2 STUFENSTUFE I 125-2000 1 / MINSTUFE II 250-4000 1 / LESS CONSONANT GRADATION IS MADE THROUGH RIEMENUMLEGUNGVORSCHUB INCLUDING ELECTROMAGNETIC KUPPLUNG0, 10/0.16/0.25 MM/UMDR.SPINDEL/TISCH240-790 MMMASCHINEN DIMENSIONS (W X D X H) 520 X 820 X 1900 MMMASCHINEN DIMENSION (WITH VP) (W X D X H) 637 X 1096 X 2120 MMGEWICHT300 KGINKLUSIVE DRILLING PACKAGE CONSISTING: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. DELIVERY: FREE HOUSE INCLUDING VERPACKUNGNICHT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! * FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-grinding diameter: 350 mm<br/>grinding length: 1500 mm<br/>centre height: 175 mm<br/>control:  <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>basis:<br/>kellenberger kel-varia ur175-1500<br/>(fotos von bereits gelieferter maschine mit<br/>spitzenweite 1000mm)<br/><br/>schleifkopf ur mit t1-t2-t3<br/><br/>grundausstattung:<br/><br/>-b-achse hochauflösend<br/>-marposs messeinrichtung zur werkzeugvermessung<br/>-schwenken um die scheibenkante<br/>-aktive längspositionierung<br/>-gap an t1 berührungslos<br/>-v-konstant<br/>-reitstock  mit handrückzug<br/>-wss mit konus mk5, optional mit adapter mk5/kurzkegel<br/><br/>folgende ausstattungen frei wählbar:<br/><br/>-schleifscheibendurchmesser t1<br/>-schleifscheibendurchmesser t2<br/>-innenschleifeinrichtung riemengetrieben oder<br/>-innenschleifeinrichtung mit hf spindel<br/>-durchmesser-messeinrichtung<br/>-hydraulischer pinolenrückzug<br/>-mikroverstellung am reitstock<br/>-werkstückspindelstock mit mk5 und kurzkegelaufnahme din 55026<br/>-cnc-gesteuerte c-achse in verbindung mit werkstückspindelstock s.o.<br/>-unrundschleifen<br/>-verstärkter werkstückspindelstock<br/>-spitzenerhöhung<br/><br/>weitere optionen auf anfrage möglich<br/><br/>es werden ausschließlich konkrete anfragen mit genauer<br/>ausstattungskonfiguration von anwendern bearbeitet<br/><br/><br/>mechanische Überholung:<br/><br/>-komplette maschine nach kellenberger messprotokoll überholt<br/>-neue servicefreundliche kabine<br/>-neulackierung<br/><br/>elektrische Überholung:<br/><br/>-neue moderne cnc-rundschleifmaschinen-steuerung<br/>-neu aufgebauter schaltschrank<br/>-neue antriebstechnik<br/>-austausch sämtlicher elektrischer leitungen berus druckschalter etc.<br/>-neue absolut-glasmaßstäbe in x- und z<br/>-neuer absolut drehgeber (bei-b-achse)<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/> GRINDING DIAMETER: 350 MM
GRINDING LENGTH: 1500 MM
CENTRE HEIGHT: 175 MM
CONTROL:
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
BASIS:
KELLENBERGER KEL-VARIA UR175-1500
(FOTOS VON BEREITS GELIEFERTER MASCHINE MIT
SPITZENWEITE 1000MM)

SCHLEIFKOPF UR MIT T1-T2-T3

GRUNDAUSSTATTUNG:

-B-ACHSE HOCHAUFLöSEND
-MARPOSS MESSEINRICHTUNG ZUR WERKZEUGVERMESSUNG
-SCHWENKEN UM DIE SCHEIBENKANTE
-AKTIVE LäNGSPOSITIONIERUNG
-GAP AN T1 BERüHRUNGSLOS
-V-KONSTANT
-REITSTOCK MIT HANDRüCKZUG
-WSS MIT KONUS MK5, OPTIONAL MIT ADAPTER MK5/KURZKEGEL

FOLGENDE AUSSTATTUNGEN FREI WäHLBAR:

-SCHLEIFSCHEIBENDURCHMESSER T1
-SCHLEIFSCHEIBENDURCHMESSER T2
-INNENSCHLEIFEINRICHTUNG RIEMENGETRIEBEN ODER
-INNENSCHLEIFEINRICHTUNG MIT HF SPINDEL
-DURCHMESSER-MESSEINRICHTUNG
-HYDRAULISCHER PINOLENRüCKZUG
-MIKROVERSTELLUNG AM REITSTOCK
-WERKSTüCKSPINDELSTOCK MIT MK5 UND KURZKEGELAUFNAHME DIN 55026
-CNC-GESTEUERTE C-ACHSE IN VERBINDUNG MIT WERKSTüCKSPINDELSTOCK S.O.
-UNRUNDSCHLEIFEN
-VERSTäRKTER WERKSTüCKSPINDELSTOCK
-SPITZENERHöHUNG

WEITERE OPTIONEN AUF ANFRAGE MöGLICH

ES WERDEN AUSSCHLIEßLICH KONKRETE ANFRAGEN MIT GENAUER
AUSSTATTUNGSKONFIGURATION VON ANWENDERN BEARBEITET


MECHANISCHE ÜBERHOLUNG:

-KOMPLETTE MASCHINE NACH KELLENBERGER MESSPROTOKOLL üBERHOLT
-NEUE SERVICEFREUNDLICHE KABINE
-NEULACKIERUNG

ELEKTRISCHE ÜBERHOLUNG:

-NEUE MODERNE CNC-RUNDSCHLEIFMASCHINEN-STEUERUNG
-NEU AUFGEBAUTER SCHALTSCHRANK
-NEUE ANTRIEBSTECHNIK
-AUSTAUSCH SäMTLICHER ELEKTRISCHER LEITUNGEN BERUS DRUCKSCHALTER ETC.
-NEUE ABSOLUT-GLASMAßSTäBE IN X- UND Z
-NEUER ABSOLUT DREHGEBER (BEI-B-ACHSE)










Vendedor: BEMA
Año de construcción: usado
Precio: 2.100 €
Ubicación: Land-fully automatic bread slicer

herlitzius

type: shop

technical data:

rundmesserschnitt-bread slicer
    oil-free cutting also of warm breads
    cut thickness selectable: 3-16 mm
    bread round: l 320 x h 110 x 150 mm
    bread hook
    suitable for all types of bread
    with bread tray to the bag
    for maximum safety during the cutting operation with sight glass cover
    400 v / 50 hz / 1,5 kw
    size: h110 x b100 x t72 cm
    mobile on 4 pulleys with 2 brakes
    year of construction: 2001
    function tested machine ready for use immediately!

see state original images!

if you have questions, email or call.  FULLY AUTOMATIC BREAD SLICER HERLITZIUS TYPE: SHOP TECHNICAL DATA: RUNDMESSERSCHNITT-BREAD SLICER OIL-FREE CUTTING ALSO OF WARM BREADS CUT THICKNESS SELECTABLE: 3-16 MM BREAD ROUND: L 320 X H 110 X 150 MM BREAD HOOK SUITABLE FOR ALL TYPES OF BREAD WITH BREAD TRAY TO THE BAG FOR MAXIMUM SAFETY DURING THE CUTTING OPERATION WITH SIGHT GLASS COVER 400 V / 50 HZ / 1,5 KW SIZE: H110 X B100 X T72 CM MOBILE ON 4 PULLEYS WITH 2 BRAKES YEAR OF CONSTRUCTION: 2001 FUNCTION TESTED MACHINE READY FOR USE IMMEDIATELY! SEE STATE ORIGINAL IMAGES! IF YOU HAVE QUESTIONS, EMAIL OR CALL.
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 48.000 €
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 3500 x 2200 x 2300 mm<br/>description: ycm nt2000 sy bsm80 lathe<br> <br> max. turning length 519 mm<br> max. ducrhmesser 350 mm, standard diameter 265 mm<br> travels: x= 260 mm, y= 100 mm, z= 580 mm, b= 600 mm<br> rapid traverse (x/y/z/,b)= 20/24/10/20 m/min<br> cutting speed 1-10000 mm/min<br> revolver with 12 places, bmt65/vdi40<br> control fanuc type series 18i-tb<br> incl. bar loader manufacturer barload type bsm80, and extensive tools <b>without assembly</b><br> WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 3500 X 2200 X 2300 MM
DESCRIPTION: YCM NT2000 SY BSM80 LATHE

MAX. TURNING LENGTH 519 MM
MAX. DUCRHMESSER 350 MM, STANDARD DIAMETER 265 MM
TRAVELS: X= 260 MM, Y= 100 MM, Z= 580 MM, B= 600 MM
RAPID TRAVERSE (X/Y/Z/,B)= 20/24/10/20 M/MIN
CUTTING SPEED 1-10000 MM/MIN
REVOLVER WITH 12 PLACES, BMT65/VDI40
CONTROL FANUC TYPE SERIES 18I-TB
INCL. BAR LOADER MANUFACTURER BARLOAD TYPE BSM80, AND EXTENSIVE TOOLS WITHOUT ASSEMBLY
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-schließkraft: 750kn, einspritzdruck: 2350bar, schneckendurchmesser: 30mm, max. Öffnungsweg: 550/ 350mm, auswurfhub: 150mm, weight: 3.5t.  SCHLIEßKRAFT: 750KN, EINSPRITZDRUCK: 2350BAR, SCHNECKENDURCHMESSER: 30MM, MAX. ÖFFNUNGSWEG: 550/ 350MM, AUSWURFHUB: 150MM, WEIGHT: 3.5T.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 1.200 €
Ubicación: Land-plummer block housings, plummer block housings, bearing blocks for shredders, shredders, watermill, hackers, granulator, granulator, cutting granulator<br /><br />-2 pieces plummer block housings made of steel for heavy use<br />-type bearing block inner diameter 320 mm<br />-installing bearings designation 22236/22330/23064/23138/23236<br />-installation bearings abbreviations 22236k / 22330k / 23064k / 23138k / 23236k<br />-with shaft seal washers<br />-1x existing used bearing 23138 cck / c3w33 with adapter sleeve h3038<br />-price for both bearings plus accessories<br />-dimensions 560/190 / h395 mm / piece<br />-weight about 200 kg / piece PLUMMER BLOCK HOUSINGS, PLUMMER BLOCK HOUSINGS, BEARING BLOCKS FOR SHREDDERS, SHREDDERS, WATERMILL, HACKERS, GRANULATOR, GRANULATOR, CUTTING GRANULATOR

-2 PIECES PLUMMER BLOCK HOUSINGS MADE OF STEEL FOR HEAVY USE
-TYPE BEARING BLOCK INNER DIAMETER 320 MM
-INSTALLING BEARINGS DESIGNATION 22236/22330/23064/23138/23236
-INSTALLATION BEARINGS ABBREVIATIONS 22236K / 22330K / 23064K / 23138K / 23236K
-WITH SHAFT SEAL WASHERS
-1X EXISTING USED BEARING 23138 CCK / C3W33 WITH ADAPTER SLEEVE H3038
-PRICE FOR BOTH BEARINGS PLUS ACCESSORIES
-DIMENSIONS 560/190 / H395 MM / PIECE
-WEIGHT ABOUT 200 KG / PIECE
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-flaschenreinigungsmaschine, baujahr: 2013, flaschen 45-90 mm durchmesser, 
120-320 mm flaschenhöhe, leistung ca. 3.500 - 4.000 flaschen / stunde, 0,33 330 ml und 0,75 750 mm bügelflasche.

botte washer washing machine, year: 2013, bottle diameter 45-90 mm, bottle hight 120-320 mm, capacity approx. 3.500 - 4.000 bph, for 0,33 330 mm and 0,75 750 ml,  flip clip swing top bottle. FLASCHENREINIGUNGSMASCHINE, BAUJAHR: 2013, FLASCHEN 45-90 MM DURCHMESSER, 120-320 MM FLASCHENHöHE, LEISTUNG CA. 3.500 - 4.000 FLASCHEN / STUNDE, 0,33 330 ML UND 0,75 750 MM BüGELFLASCHE. BOTTE WASHER WASHING MACHINE, YEAR: 2013, BOTTLE DIAMETER 45-90 MM, BOTTLE HIGHT 120-320 MM, CAPACITY APPROX. 3.500 - 4.000 BPH, FOR 0,33 330 MM AND 0,75 750 ML, FLIP CLIP SWING TOP BOTTLE.
Vendedor: Ebert Technologie GmbH
Año de construcción: usado
Precio: 240 €
Ubicación: Land-precision three-jaw chuck, chuck, face plate, 3-jaw chuck<br /><br />-dhk 200x3<br />-tgl 30-2333<br />-chuck size Ø 200 mm<br />-backen individually and completely adjustable<br />-bake change<br />-through-hole 55 mm<br />-rezess 160 mm<br />-2x food available<br />-prize piece<br />-weight 16 kg PRECISION THREE-JAW CHUCK, CHUCK, FACE PLATE, 3-JAW CHUCK

-DHK 200X3
-TGL 30-2333
-CHUCK SIZE Ø 200 MM
-BACKEN INDIVIDUALLY AND COMPLETELY ADJUSTABLE
-BAKE CHANGE
-THROUGH-HOLE 55 MM
-REZESS 160 MM
-2X FOOD AVAILABLE
-PRIZE PIECE
-WEIGHT 16 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 9.300 €
Ubicación: Land-mit manometer, mit kugelhahn, mit probierhahn
31 x kerzen l x d: 560 x 70 mm  
gewindestutzen von oben: dn 80, dn 50, dn 40, dn 80
unten dn 32

zul. betriebsüberdruck 10 bar
zul. betriebstemperatur 140°c
12 klammer-schrauber m16-l2-8
inhalt: 198 liter 
baujahr: 1996
typ: 802a.500-31x3-00

abmessungen:
durchmesser:   ca. 700 mm 
höhe:                   1970 mm

MIT MANOMETER, MIT KUGELHAHN, MIT PROBIERHAHN 31 X KERZEN L X D: 560 X 70 MM GEWINDESTUTZEN VON OBEN: DN 80, DN 50, DN 40, DN 80 UNTEN DN 32 ZUL. BETRIEBSüBERDRUCK 10 BAR ZUL. BETRIEBSTEMPERATUR 140°C 12 KLAMMER-SCHRAUBER M16-L2-8 INHALT: 198 LITER BAUJAHR: 1996 TYP: 802A.500-31X3-00 ABMESSUNGEN: DURCHMESSER: CA. 700 MM HöHE: 1970 MM
Vendedor: Eurolux GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-capacity approx.: 110  paletts/h<br />pressure: 6  bar    <br />power consumption: 11,5 kw<br />weight: 3  t<br />formats:  foil rolling height 500 mm, outside diameter<br />location images: folienrollenhöhe 500 mm, außendurchmesser max. 250 mm<br /> CAPACITY APPROX.: 110 PALETTS/H
PRESSURE: 6 BAR
POWER CONSUMPTION: 11,5 KW
WEIGHT: 3 T
FORMATS: FOIL ROLLING HEIGHT 500 MM, OUTSIDE DIAMETER
LOCATION IMAGES: FOLIENROLLENHöHE 500 MM, AUßENDURCHMESSER MAX. 250 MM
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land--in stock
-after reviewing the technical
-ready to go

technical parameters:

sharpener:

-length of sharpening band saws 2000 to 5000 mm

-height ostrzonych:
* triangle: 4 to 12 mm
* broken: 7 to 20 mm
the hook: 4 to 7 mm

-graduation ostrzonych teeth 5 to 30 mm
-focusing speed 40 teeth/min
-spindle electric motor 0, 18kw 380v/2800 rpm.
-feed the electric motor 0.15 kw 380v/900 rpm.
-grinding wheel 150 x 8 with a 13 or 20

special lock-puller:

-opening size on a page to 1 mm
-accuracy of split approx. 0.05 mm
-speed up to 70 teeth/min
-the width of the saw blade 15-100 mm
-tooth 8-30 mm
-height teeth 5-16 mm
-the thickness of the frame saw blades for 1.2 mm

-weight 35 kg

dimensions of machine:

-height 1300 mm

-length: 700 mm

-width: 1000 mm -IN STOCK -AFTER REVIEWING THE TECHNICAL -READY TO GO TECHNICAL PARAMETERS: SHARPENER: -LENGTH OF SHARPENING BAND SAWS 2000 TO 5000 MM -HEIGHT OSTRZONYCH: * TRIANGLE: 4 TO 12 MM * BROKEN: 7 TO 20 MM THE HOOK: 4 TO 7 MM -GRADUATION OSTRZONYCH TEETH 5 TO 30 MM -FOCUSING SPEED 40 TEETH/MIN -SPINDLE ELECTRIC MOTOR 0, 18KW 380V/2800 RPM. -FEED THE ELECTRIC MOTOR 0.15 KW 380V/900 RPM. -GRINDING WHEEL 150 X 8 WITH A 13 OR 20 SPECIAL LOCK-PULLER: -OPENING SIZE ON A PAGE TO 1 MM -ACCURACY OF SPLIT APPROX. 0.05 MM -SPEED UP TO 70 TEETH/MIN -THE WIDTH OF THE SAW BLADE 15-100 MM -TOOTH 8-30 MM -HEIGHT TEETH 5-16 MM -THE THICKNESS OF THE FRAME SAW BLADES FOR 1.2 MM -WEIGHT 35 KG DIMENSIONS OF MACHINE: -HEIGHT 1300 MM -LENGTH: 700 MM -WIDTH: 1000 MM
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-neue kantenschleifmaschine\r\nfabr.: rehnen\r\ntyp: r1\r\n\r\ntechnische daten:\r\nspannung: 400 v, 50hz\r\nmotorleistung: 3 kw\r\nschleifbandabmessung: 150 × 2280 mm\r\nschleifbandgeschwindigkeit: 22 m/sec\r\ntischgröße: 350 × 750 mm\r\nplatzbedarf: 800 × 1000 mm\r\ngewicht: ab 200 kg\r\nabsauganschluss: Ø 100 mm\r\narbeitsplatzbezogener emissionswert: 83 db (a)\r\n\r\ninklusive:\r\n- auflagetisch an der umlenkrolle\r\n- schwenkbares kantenschleifaggregat oszillation 90 - 135°\r\n\r\ndie hochwertige kantenschleifmaschine r 1 ist für anspruchsvolle schleifarbeiten konzipiert.\r\nmit ihrem leistungsstarken graugussschleifaggregat und der pneumatischen oszillation ist die r 1 für hohe oberflächenqualitäten ausgelegt.\r\nein in der höhe verstellbarer arbeitstisch gewährleistet eine sichere werkstückaufnahme und ein ergonomisches arbeiten.\r\n\r\n\r\noptional erhältliches zubehör:\r\n- schleifbandbreite von 200 mm\r\n- fahreinrichtung mit grosen lenkrollen\r\n- polumschaltbarer motor 11 / 22 m/sek.\r\n- konsole für vorschub\r\n- zusätzliche umlenkrolle, durchmesser gem. vorgabe (standardgrößen von 40-80 mm und sondergrößen)\r\n\r\n NEUE KANTENSCHLEIFMASCHINE\R\NFABR.: REHNEN\R\NTYP: R1\R\N\R\NTECHNISCHE DATEN:\R\NSPANNUNG: 400 V, 50HZ\R\NMOTORLEISTUNG: 3 KW\R\NSCHLEIFBANDABMESSUNG: 150 × 2280 MM\R\NSCHLEIFBANDGESCHWINDIGKEIT: 22 M/SEC\R\NTISCHGRößE: 350 × 750 MM\R\NPLATZBEDARF: 800 × 1000 MM\R\NGEWICHT: AB 200 KG\R\NABSAUGANSCHLUSS: Ø 100 MM\R\NARBEITSPLATZBEZOGENER EMISSIONSWERT: 83 DB (A)\R\N\R\NINKLUSIVE:\R\N- AUFLAGETISCH AN DER UMLENKROLLE\R\N- SCHWENKBARES KANTENSCHLEIFAGGREGAT OSZILLATION 90 - 135°\R\N\R\NDIE HOCHWERTIGE KANTENSCHLEIFMASCHINE R 1 IST FüR ANSPRUCHSVOLLE SCHLEIFARBEITEN KONZIPIERT.\R\NMIT IHREM LEISTUNGSSTARKEN GRAUGUSSSCHLEIFAGGREGAT UND DER PNEUMATISCHEN OSZILLATION IST DIE R 1 FüR HOHE OBERFLäCHENQUALITäTEN AUSGELEGT.\R\NEIN IN DER HöHE VERSTELLBARER ARBEITSTISCH GEWäHRLEISTET EINE SICHERE WERKSTüCKAUFNAHME UND EIN ERGONOMISCHES ARBEITEN.\R\N\R\N\R\NOPTIONAL ERHäLTLICHES ZUBEHöR:\R\N- SCHLEIFBANDBREITE VON 200 MM\R\N- FAHREINRICHTUNG MIT GROSEN LENKROLLEN\R\N- POLUMSCHALTBARER MOTOR 11 / 22 M/SEK.\R\N- KONSOLE FüR VORSCHUB\R\N- ZUSäTZLICHE UMLENKROLLE, DURCHMESSER GEM. VORGABE (STANDARDGRößEN VON 40-80 MM UND SONDERGRößEN)\R\N\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land--machine used
-after reviewing the technical
-ready to go
-very good condition

technical parameters:

sharpener:

genus performed:

* a triangular

* broken (enhanced)

* a convex (parrot)

* extended-hook

* a triangular and ridged with extended bottom

genus ostrzonych saw blades:

* blades

* disc

-height ostrzonych:

* a triangular 5-24 mm

* broken to 35 mm

-graduation ostrzonych teeth 5-70 mm
-angle of teeth:

* 3-22-saw blades

* 0-30-circular saw blades

-max length of ostrzonych machine gang saw blades – 1800 mm
-the diameter of the circular saw ostrzonych 180-800 mm
-max length of ostrzonych band saws

* up to 5.6 mb with one follower

* up to 12 mb with two pushers

-the thickness of the ostrzonych drank up to 5 mm
-the width of the machine gang saw blades – 70-180 mm
-feed speed 40 teeth/min
-grinding wheel 250x10xotw 32
-the length of the saw guide 2000 mm
-drive motor 1, 1kw/30v/1400obr.
-dust lift motor 0.55 kw/380v/2800obr.

special lock-puller:
-swing diameter saw blade 290-1200 mm
-the thickness of the frame saw blades up to 5 mm
-opening size to 1.2 mm
-pitch swing teeth 15 to 80 mm
-the height of the swing teeth any

-weight 28 kg

overall dimensions:
-length: 950 mm
-width: 820 mm
-height 1200 mm

-weight 250 kg -MACHINE USED -AFTER REVIEWING THE TECHNICAL -READY TO GO -VERY GOOD CONDITION TECHNICAL PARAMETERS: SHARPENER: GENUS PERFORMED: * A TRIANGULAR * BROKEN (ENHANCED) * A CONVEX (PARROT) * EXTENDED-HOOK * A TRIANGULAR AND RIDGED WITH EXTENDED BOTTOM GENUS OSTRZONYCH SAW BLADES: * BLADES * DISC -HEIGHT OSTRZONYCH: * A TRIANGULAR 5-24 MM * BROKEN TO 35 MM -GRADUATION OSTRZONYCH TEETH 5-70 MM -ANGLE OF TEETH: * 3-22-SAW BLADES * 0-30-CIRCULAR SAW BLADES -MAX LENGTH OF OSTRZONYCH MACHINE GANG SAW BLADES – 1800 MM -THE DIAMETER OF THE CIRCULAR SAW OSTRZONYCH 180-800 MM -MAX LENGTH OF OSTRZONYCH BAND SAWS * UP TO 5.6 MB WITH ONE FOLLOWER * UP TO 12 MB WITH TWO PUSHERS -THE THICKNESS OF THE OSTRZONYCH DRANK UP TO 5 MM -THE WIDTH OF THE MACHINE GANG SAW BLADES – 70-180 MM -FEED SPEED 40 TEETH/MIN -GRINDING WHEEL 250X10XOTW 32 -THE LENGTH OF THE SAW GUIDE 2000 MM -DRIVE MOTOR 1, 1KW/30V/1400OBR. -DUST LIFT MOTOR 0.55 KW/380V/2800OBR. SPECIAL LOCK-PULLER: -SWING DIAMETER SAW BLADE 290-1200 MM -THE THICKNESS OF THE FRAME SAW BLADES UP TO 5 MM -OPENING SIZE TO 1.2 MM -PITCH SWING TEETH 15 TO 80 MM -THE HEIGHT OF THE SWING TEETH ANY -WEIGHT 28 KG OVERALL DIMENSIONS: -LENGTH: 950 MM -WIDTH: 820 MM -HEIGHT 1200 MM -WEIGHT 250 KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-internal diameter:250 mm<br/>grinding depth: mm<br/>swing diameter:455 mm<br/>workpiece length - max.:1200 mm<br/>table rotating:-4/+8 °<br/>table speeds:0-4000 mm/min<br/>max. workpiece weight:80 kg<br/>workhead - center taper:5 mk<br/>rotation speed of workhead :0 - 400 1/min<br/>workhead motor:4 kw<br/>3-jaw chuck:250 (selbstschließend) mm<br/>grinding motor:4 kw<br/>coolant pump:2,2 kw<br/>weight approx.:2,4 t<br/>machine dimensions:3200 x 2100 mm<br/>cnc controller:siemens 840 d oder sps von siemens <br/>servo motors: <br/>autom. sensing device for grinding wheel:option <br/>: <br/>linear scales and ballscrew:in allen achsen <br/>grinding wheel dresser: <br/>: <br/>fully enclosed: <br/>: <br/>technical documentation in german language: <br/>ce-design: <br/>signal lamp: <br/>face grinding attachement:durchmesser 125 mm<br/>clamping chuck:250 (selbstschließend), 1 satz harte backen, 1 satz weiche backen, 1 satz innen mm<br/>: <br/>magnetic and paper filter : <br/>levellig elements: <br/>frequency control main spindel engine:für die innenschleifeinrichtung <br/>internal grinding spindle:rpm 28.000, diam. 60 mm. min. diam. cap. 25 mm. x bohrung 50 mm, max. diam. cap. 100 mm. x bohrung 115 mm . <br/>internal grinding spindle:rpm 10.000, diam. 100 mm, min. diam. cap. 50 mm x bohrung 100 mm, max.diam. cap. 250 mm xbohrung 220 mm <br/>fixed steady rests:10-100 mm, 100-170 mm <br/><br/> performance and precision degree   robbi grinding machines are according to the international precision normes iso 2433. the table movement linearity is guaranteed by a max. deviation of  0,002 mm/mt.  the obtainable grinding roundness is :  0,4m (**)  (**)  for a test workpiece ground in our factory during machine testing        the cnc controls :  wheel head movement  (axis x) longitudinal table movement  (axis z) work head spindle rotation speed    the available programs permit the programming of the following grinding cycles  plunge  cylindrical pass   cylindrical pass with interpolation between table and wheel movement to grind taper workpieces radius   the software for the workpiece grinding operation is very simple and intuitive.   to facilitate the programming the software is equipped with an exemplifying graphics, to input the data for each parameter.      the software, has been specially studied, so as to permit also non specialised operators to programme without any problems complex workpieces.   when the workpiece grinding programme has been completed the cnc will automatically make up a summary list, where only the geometric parameters are evidenced.     this list permits with a  glance to verify the complete programme;  this operation is very helpful to verify eventual input data errors or to check rapidly a workpiece programme when reloaded from the file.        while the programme is in execution, it is possible to intervene and modify in real time the technologic parameters, such as:  increments, dwell inversion times, sparkout passes.   also, it is possible to intervene with the jog handwheel.      the grinding machine is composed of :    base  structure in normalised and stabilised cast iron with large ground guides.    the lubrication plant supplies a constant oil flow distributed over the complete length of the guides.    in the middle of the base, there is positioned the ball screw  for the table longitudinal movement.    on all the lower part of the perimeter are situated the recesses for machine levelling.  considering the base structure, usually a foundation is not required.    table   the table is manufactured in two parts, both are in normalised and stabilised cast iron.     the lower  part is composed of wide guides which are ground and accurately hand scrapped, for a better sliding.       the upper part, is swivelable in the two directions, suitable for grinding tapered workpieces.    it includes  a micrometric device with centesimal dial gauge for taper control.       workhead  the structure in normalised, stabilised and well ribbed cast iron, allows to support the workpiece weight and the force generated by the grinding operation.      the spindle rotates on high precision ball bearings, guaranteeing restricted tolerance and maximum rigidity in the working.      the spindle rotation is by means of a three phase motor with variable speed controlled by an inverter.  internal grinding spindle carriage  the structure is composed of a carriage, where the internal grinding spindle is located.    the working feed, is obtained by a re-circulating ball screw and preloaded nut.    the screw movement is assured by a brushless motor.       the incremental optic rule guarantees a wheelhead positioning precision of 0,001 mm.   internal grinding spindle  as there are many and various types of internal grinding spindles, according to the diameters and lengths that need to be ground, the machine is supplied without an internal grinding spindle, so that the customer may select which type is more suitable for his job.      the machine is manufactured standard with a belt transmission suitable for diam. mm. 60, diam. mm. 80 and diam. mm. 100 internal grinding spindles.      on request,  high frequency spindles may be assembled.   wheelhead  for face grinding the structure is composed of a carriage, where the face grinding device is located.    the positioning is obtained by an hydraulic cylinder.   the diamond dressing device is assembled on the face grinding device casing.   manual feed handwheels  electronic type, with double selection of the increments division 0.1 - 0.01 and 0.001 mm.  for wheelhead and table movements.     diamond dresser  the internal diamond dressing device is very strong and is positioned on the table.     it starts  hydraulically, when the dressing operation is selected, by the operator.     the dressing operation may be carried out manually or in automatic cycle.    equipment and electrical plant  in a cooled cabinet, separate from the machine.      hydraulic plant   the hydraulic power pack, is separate from the machine and activates the hydraulic diamond dresser and face grinding device.       lubrication plant the lubrication power pack, is separate from the machine and supplies continuous oil to the wheelhead guides.   the recovered oil is filtered and then resent to the power pack.     the re-circulating ball screw nut for the working feed, is grease lubricated.           coolant plant  large capacity tank for the coolant water, complete with electric equipment.       equipped with coolant magnet cleaner  and coolant paper roll cleaner.       protections  for the protection of the operator all movable parts are covered with suitable guards.     precisely: protection casing for belts, protection casing for grinding wheel and bellows for guides.   the machine is completely closed and the front protection is a sheet sliding doors with poly-carbonate shields.   a safety device, does not permit the automatic cycle to start if the front sliding doors are open.   INTERNAL DIAMETER:250 MM
GRINDING DEPTH: MM
SWING DIAMETER:455 MM
WORKPIECE LENGTH - MAX.:1200 MM
TABLE ROTATING:-4/+8 °
TABLE SPEEDS:0-4000 MM/MIN
MAX. WORKPIECE WEIGHT:80 KG
WORKHEAD - CENTER TAPER:5 MK
ROTATION SPEED OF WORKHEAD :0 - 400 1/MIN
WORKHEAD MOTOR:4 KW
3-JAW CHUCK:250 (SELBSTSCHLIEßEND) MM
GRINDING MOTOR:4 KW
COOLANT PUMP:2,2 KW
WEIGHT APPROX.:2,4 T
MACHINE DIMENSIONS:3200 X 2100 MM
CNC CONTROLLER:SIEMENS 840 D ODER SPS VON SIEMENS
SERVO MOTORS:
AUTOM. SENSING DEVICE FOR GRINDING WHEEL:OPTION
:
LINEAR SCALES AND BALLSCREW:IN ALLEN ACHSEN
GRINDING WHEEL DRESSER:
:
FULLY ENCLOSED:
:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
CE-DESIGN:
SIGNAL LAMP:
FACE GRINDING ATTACHEMENT:DURCHMESSER 125 MM
CLAMPING CHUCK:250 (SELBSTSCHLIEßEND), 1 SATZ HARTE BACKEN, 1 SATZ WEICHE BACKEN, 1 SATZ INNEN MM
:
MAGNETIC AND PAPER FILTER :
LEVELLIG ELEMENTS:
FREQUENCY CONTROL MAIN SPINDEL ENGINE:FüR DIE INNENSCHLEIFEINRICHTUNG
INTERNAL GRINDING SPINDLE:RPM 28.000, DIAM. 60 MM. MIN. DIAM. CAP. 25 MM. X BOHRUNG 50 MM, MAX. DIAM. CAP. 100 MM. X BOHRUNG 115 MM .
INTERNAL GRINDING SPINDLE:RPM 10.000, DIAM. 100 MM, MIN. DIAM. CAP. 50 MM X BOHRUNG 100 MM, MAX.DIAM. CAP. 250 MM XBOHRUNG 220 MM
FIXED STEADY RESTS:10-100 MM, 100-170 MM

PERFORMANCE AND PRECISION DEGREE ROBBI GRINDING MACHINES ARE ACCORDING TO THE INTERNATIONAL PRECISION NORMES ISO 2433. THE TABLE MOVEMENT LINEARITY IS GUARANTEED BY A MAX. DEVIATION OF 0,002 MM/MT. THE OBTAINABLE GRINDING ROUNDNESS IS : 0,4M (**) (**) FOR A TEST WORKPIECE GROUND IN OUR FACTORY DURING MACHINE TESTING THE CNC CONTROLS : WHEEL HEAD MOVEMENT (AXIS X) LONGITUDINAL TABLE MOVEMENT (AXIS Z) WORK HEAD SPINDLE ROTATION SPEED THE AVAILABLE PROGRAMS PERMIT THE PROGRAMMING OF THE FOLLOWING GRINDING CYCLES PLUNGE CYLINDRICAL PASS CYLINDRICAL PASS WITH INTERPOLATION BETWEEN TABLE AND WHEEL MOVEMENT TO GRIND TAPER WORKPIECES RADIUS THE SOFTWARE FOR THE WORKPIECE GRINDING OPERATION IS VERY SIMPLE AND INTUITIVE. TO FACILITATE THE PROGRAMMING THE SOFTWARE IS EQUIPPED WITH AN EXEMPLIFYING GRAPHICS, TO INPUT THE DATA FOR EACH PARAMETER. THE SOFTWARE, HAS BEEN SPECIALLY STUDIED, SO AS TO PERMIT ALSO NON SPECIALISED OPERATORS TO PROGRAMME WITHOUT ANY PROBLEMS COMPLEX WORKPIECES. WHEN THE WORKPIECE GRINDING PROGRAMME HAS BEEN COMPLETED THE CNC WILL AUTOMATICALLY MAKE UP A SUMMARY LIST, WHERE ONLY THE GEOMETRIC PARAMETERS ARE EVIDENCED. THIS LIST PERMITS WITH A GLANCE TO VERIFY THE COMPLETE PROGRAMME; THIS OPERATION IS VERY HELPFUL TO VERIFY EVENTUAL INPUT DATA ERRORS OR TO CHECK RAPIDLY A WORKPIECE PROGRAMME WHEN RELOADED FROM THE FILE. WHILE THE PROGRAMME IS IN EXECUTION, IT IS POSSIBLE TO INTERVENE AND MODIFY IN REAL TIME THE TECHNOLOGIC PARAMETERS, SUCH AS: INCREMENTS, DWELL INVERSION TIMES, SPARKOUT PASSES. ALSO, IT IS POSSIBLE TO INTERVENE WITH THE JOG HANDWHEEL. THE GRINDING MACHINE IS COMPOSED OF : BASE STRUCTURE IN NORMALISED AND STABILISED CAST IRON WITH LARGE GROUND GUIDES. THE LUBRICATION PLANT SUPPLIES A CONSTANT OIL FLOW DISTRIBUTED OVER THE COMPLETE LENGTH OF THE GUIDES. IN THE MIDDLE OF THE BASE, THERE IS POSITIONED THE BALL SCREW FOR THE TABLE LONGITUDINAL MOVEMENT. ON ALL THE LOWER PART OF THE PERIMETER ARE SITUATED THE RECESSES FOR MACHINE LEVELLING. CONSIDERING THE BASE STRUCTURE, USUALLY A FOUNDATION IS NOT REQUIRED. TABLE THE TABLE IS MANUFACTURED IN TWO PARTS, BOTH ARE IN NORMALISED AND STABILISED CAST IRON. THE LOWER PART IS COMPOSED OF WIDE GUIDES WHICH ARE GROUND AND ACCURATELY HAND SCRAPPED, FOR A BETTER SLIDING. THE UPPER PART, IS SWIVELABLE IN THE TWO DIRECTIONS, SUITABLE FOR GRINDING TAPERED WORKPIECES. IT INCLUDES A MICROMETRIC DEVICE WITH CENTESIMAL DIAL GAUGE FOR TAPER CONTROL. WORKHEAD THE STRUCTURE IN NORMALISED, STABILISED AND WELL RIBBED CAST IRON, ALLOWS TO SUPPORT THE WORKPIECE WEIGHT AND THE FORCE GENERATED BY THE GRINDING OPERATION. THE SPINDLE ROTATES ON HIGH PRECISION BALL BEARINGS, GUARANTEEING RESTRICTED TOLERANCE AND MAXIMUM RIGIDITY IN THE WORKING. THE SPINDLE ROTATION IS BY MEANS OF A THREE PHASE MOTOR WITH VARIABLE SPEED CONTROLLED BY AN INVERTER. INTERNAL GRINDING SPINDLE CARRIAGE THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE INTERNAL GRINDING SPINDLE IS LOCATED. THE WORKING FEED, IS OBTAINED BY A RE-CIRCULATING BALL SCREW AND PRELOADED NUT. THE SCREW MOVEMENT IS ASSURED BY A BRUSHLESS MOTOR. THE INCREMENTAL OPTIC RULE GUARANTEES A WHEELHEAD POSITIONING PRECISION OF 0,001 MM. INTERNAL GRINDING SPINDLE AS THERE ARE MANY AND VARIOUS TYPES OF INTERNAL GRINDING SPINDLES, ACCORDING TO THE DIAMETERS AND LENGTHS THAT NEED TO BE GROUND, THE MACHINE IS SUPPLIED WITHOUT AN INTERNAL GRINDING SPINDLE, SO THAT THE CUSTOMER MAY SELECT WHICH TYPE IS MORE SUITABLE FOR HIS JOB. THE MACHINE IS MANUFACTURED STANDARD WITH A BELT TRANSMISSION SUITABLE FOR DIAM. MM. 60, DIAM. MM. 80 AND DIAM. MM. 100 INTERNAL GRINDING SPINDLES. ON REQUEST, HIGH FREQUENCY SPINDLES MAY BE ASSEMBLED. WHEELHEAD FOR FACE GRINDING THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE FACE GRINDING DEVICE IS LOCATED. THE POSITIONING IS OBTAINED BY AN HYDRAULIC CYLINDER. THE DIAMOND DRESSING DEVICE IS ASSEMBLED ON THE FACE GRINDING DEVICE CASING. MANUAL FEED HANDWHEELS ELECTRONIC TYPE, WITH DOUBLE SELECTION OF THE INCREMENTS DIVISION 0.1 - 0.01 AND 0.001 MM. FOR WHEELHEAD AND TABLE MOVEMENTS. DIAMOND DRESSER THE INTERNAL DIAMOND DRESSING DEVICE IS VERY STRONG AND IS POSITIONED ON THE TABLE. IT STARTS HYDRAULICALLY, WHEN THE DRESSING OPERATION IS SELECTED, BY THE OPERATOR. THE DRESSING OPERATION MAY BE CARRIED OUT MANUALLY OR IN AUTOMATIC CYCLE. EQUIPMENT AND ELECTRICAL PLANT IN A COOLED CABINET, SEPARATE FROM THE MACHINE. HYDRAULIC PLANT THE HYDRAULIC POWER PACK, IS SEPARATE FROM THE MACHINE AND ACTIVATES THE HYDRAULIC DIAMOND DRESSER AND FACE GRINDING DEVICE. LUBRICATION PLANT THE LUBRICATION POWER PACK, IS SEPARATE FROM THE MACHINE AND SUPPLIES CONTINUOUS OIL TO THE WHEELHEAD GUIDES. THE RECOVERED OIL IS FILTERED AND THEN RESENT TO THE POWER PACK. THE RE-CIRCULATING BALL SCREW NUT FOR THE WORKING FEED, IS GREASE LUBRICATED. COOLANT PLANT LARGE CAPACITY TANK FOR THE COOLANT WATER, COMPLETE WITH ELECTRIC EQUIPMENT. EQUIPPED WITH COOLANT MAGNET CLEANER AND COOLANT PAPER ROLL CLEANER. PROTECTIONS FOR THE PROTECTION OF THE OPERATOR ALL MOVABLE PARTS ARE COVERED WITH SUITABLE GUARDS. PRECISELY: PROTECTION CASING FOR BELTS, PROTECTION CASING FOR GRINDING WHEEL AND BELLOWS FOR GUIDES. THE MACHINE IS COMPLETELY CLOSED AND THE FRONT PROTECTION IS A SHEET SLIDING DOORS WITH POLY-CARBONATE SHIELDS. A SAFETY DEVICE, DOES NOT PERMIT THE AUTOMATIC CYCLE TO START IF THE FRONT SLIDING DOORS ARE OPEN.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-model: dure

brand: pemal, poland

-machine in stock
-after reviewing the technical
-vg condition-ready to work
-production of polish pemal

technical parameters:

-the maximum length of the ostrzonych: 640 mm
-supply voltage: 3 x 400 v; 50 hz

– the largest working shift the bottom bracket tool: 660 mm
-the biggest movement of bottom bracket cross: 160 mm
-the biggest movement of the grinding head in the horizontal plane: 140 mm
is the largest knife thickness 14 mm

-the grinding head rotation in the horizontal plane: 360 °
-turn the grinding head in the vertical plane: ± 30 °

– the largest vertical travel of the grinding head: 240 mm
-spindle speed: 3500 or 6000 min-1

-overall dimensions:

-the length of the 1380mm
-width-830 mm
-height 1460mm

-the mass of 515 kg MODEL: DURE BRAND: PEMAL, POLAND -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VG CONDITION-READY TO WORK -PRODUCTION OF POLISH PEMAL TECHNICAL PARAMETERS: -THE MAXIMUM LENGTH OF THE OSTRZONYCH: 640 MM -SUPPLY VOLTAGE: 3 X 400 V; 50 HZ – THE LARGEST WORKING SHIFT THE BOTTOM BRACKET TOOL: 660 MM -THE BIGGEST MOVEMENT OF BOTTOM BRACKET CROSS: 160 MM -THE BIGGEST MOVEMENT OF THE GRINDING HEAD IN THE HORIZONTAL PLANE: 140 MM IS THE LARGEST KNIFE THICKNESS 14 MM -THE GRINDING HEAD ROTATION IN THE HORIZONTAL PLANE: 360 ° -TURN THE GRINDING HEAD IN THE VERTICAL PLANE: ± 30 ° – THE LARGEST VERTICAL TRAVEL OF THE GRINDING HEAD: 240 MM -SPINDLE SPEED: 3500 OR 6000 MIN-1 -OVERALL DIMENSIONS: -THE LENGTH OF THE 1380MM -WIDTH-830 MM -HEIGHT 1460MM -THE MASS OF 515 KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-internal diameter:300 mm<br/>grinding depth: mm<br/>swing diameter:300/350 mm<br/>workpiece length - max.:2300 mm<br/>table rotating:-2/+6 °<br/>table speeds:0-4000 mm/min<br/>max. workpiece weight:400 (fliegend, 150mm von der spindelnase) kg<br/>workhead - center taper:6 mk<br/>rotation speed of workhead :0 - 400 1/min<br/>workhead motor:4 kw<br/>3-jaw chuck:250 (selbstschließend) mm<br/>grinding motor:11 kw<br/>coolant pump:2,2 kw<br/>cnc controller:siemens 840 d oder sps von siemens <br/>servo motors: <br/>autom. sensing device for grinding wheel:option <br/>: <br/>linear scales and ballscrew:in allen achsen <br/>grinding wheel dresser: <br/>: <br/>fully enclosed: <br/>: <br/>technical documentation in german language: <br/>ce-design: <br/>signal lamp: <br/>face grinding attachement:durchmesser 125 mm<br/>clamping chuck:350 (selbst zentrierend) mm<br/>: <br/>magnetic and paper filter : <br/>levellig elements: <br/>frequency control main spindel engine:für die innenschleifeinrichtung <br/>internal grinding spindle:auf anfrage <br/>internal grinding spindle:auf anfrage <br/>fixed steady rests:10-100 mm, 100-170 mm <br/><br/> performance and precision degree   robbi grinding machines are according to the international precision normes iso 2433. the table movement linearity is guaranteed by a max. deviation of  0,002 mm/mt.  the obtainable grinding roundness is :  0,4m (**)  (**)  for a test workpiece ground in our factory during machine testing        the cnc controls :  wheel head movement  (axis x) longitudinal table movement  (axis z) work head spindle rotation speed    the available programs permit the programming of the following grinding cycles  plunge  cylindrical pass   cylindrical pass with interpolation between table and wheel movement to grind taper workpieces radius   the software for the workpiece grinding operation is very simple and intuitive.   to facilitate the programming the software is equipped with an exemplifying graphics, to input the data for each parameter.      the software, has been specially studied, so as to permit also non specialised operators to programme without any problems complex workpieces.   when the workpiece grinding programme has been completed the cnc will automatically make up a summary list, where only the geometric parameters are evidenced.     this list permits with a  glance to verify the complete programme;  this operation is very helpful to verify eventual input data errors or to check rapidly a workpiece programme when reloaded from the file.        while the programme is in execution, it is possible to intervene and modify in real time the technologic parameters, such as:  increments, dwell inversion times, sparkout passes.   also, it is possible to intervene with the jog handwheel.      the grinding machine is composed of :    base  structure in normalised and stabilised cast iron with large ground guides.    the lubrication plant supplies a constant oil flow distributed over the complete length of the guides.    in the middle of the base, there is positioned the ball screw  for the table longitudinal movement.    on all the lower part of the perimeter are situated the recesses for machine levelling.  considering the base structure, usually a foundation is not required.    table   the table is manufactured in two parts, both are in normalised and stabilised cast iron.     the lower  part is composed of wide guides which are ground and accurately hand scrapped, for a better sliding.       the upper part, is swivelable in the two directions, suitable for grinding tapered workpieces.    it includes  a micrometric device with centesimal dial gauge for taper control.       workhead  the structure in normalised, stabilised and well ribbed cast iron, allows to support the workpiece weight and the force generated by the grinding operation.      the spindle rotates on high precision ball bearings, guaranteeing restricted tolerance and maximum rigidity in the working.      the spindle rotation is by means of a three phase motor with variable speed controlled by an inverter.  internal grinding spindle carriage  the structure is composed of a carriage, where the internal grinding spindle is located.    the working feed, is obtained by a re-circulating ball screw and preloaded nut.    the screw movement is assured by a brushless motor.       the incremental optic rule guarantees a wheelhead positioning precision of 0,001 mm.   internal grinding spindle  as there are many and various types of internal grinding spindles, according to the diameters and lengths that need to be ground, the machine is supplied without an internal grinding spindle, so that the customer may select which type is more suitable for his job.      the machine is manufactured standard with a belt transmission suitable for diam. mm. 60, diam. mm. 80 and diam. mm. 100 internal grinding spindles.      on request,  high frequency spindles may be assembled.   wheelhead  for face grinding the structure is composed of a carriage, where the face grinding device is located.    the positioning is obtained by an hydraulic cylinder.   the diamond dressing device is assembled on the face grinding device casing.   manual feed handwheels  electronic type, with double selection of the increments division 0.1 - 0.01 and 0.001 mm.  for wheelhead and table movements.     diamond dresser  the internal diamond dressing device is very strong and is positioned on the table.     it starts  hydraulically, when the dressing operation is selected, by the operator.     the dressing operation may be carried out manually or in automatic cycle.    equipment and electrical plant  in a cooled cabinet, separate from the machine.      hydraulic plant   the hydraulic power pack, is separate from the machine and activates the hydraulic diamond dresser and face grinding device.       lubrication plant the lubrication power pack, is separate from the machine and supplies continuous oil to the wheelhead guides.   the recovered oil is filtered and then resent to the power pack.     the re-circulating ball screw nut for the working feed, is grease lubricated.           coolant plant  large capacity tank for the coolant water, complete with electric equipment.       equipped with coolant magnet cleaner  and coolant paper roll cleaner.       protections  for the protection of the operator all movable parts are covered with suitable guards.     precisely: protection casing for belts, protection casing for grinding wheel and bellows for guides.   the machine is completely closed and the front protection is a sheet sliding doors with poly-carbonate shields.   a safety device, does not permit the automatic cycle to start if the front sliding doors are open.   INTERNAL DIAMETER:300 MM
GRINDING DEPTH: MM
SWING DIAMETER:300/350 MM
WORKPIECE LENGTH - MAX.:2300 MM
TABLE ROTATING:-2/+6 °
TABLE SPEEDS:0-4000 MM/MIN
MAX. WORKPIECE WEIGHT:400 (FLIEGEND, 150MM VON DER SPINDELNASE) KG
WORKHEAD - CENTER TAPER:6 MK
ROTATION SPEED OF WORKHEAD :0 - 400 1/MIN
WORKHEAD MOTOR:4 KW
3-JAW CHUCK:250 (SELBSTSCHLIEßEND) MM
GRINDING MOTOR:11 KW
COOLANT PUMP:2,2 KW
CNC CONTROLLER:SIEMENS 840 D ODER SPS VON SIEMENS
SERVO MOTORS:
AUTOM. SENSING DEVICE FOR GRINDING WHEEL:OPTION
:
LINEAR SCALES AND BALLSCREW:IN ALLEN ACHSEN
GRINDING WHEEL DRESSER:
:
FULLY ENCLOSED:
:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
CE-DESIGN:
SIGNAL LAMP:
FACE GRINDING ATTACHEMENT:DURCHMESSER 125 MM
CLAMPING CHUCK:350 (SELBST ZENTRIEREND) MM
:
MAGNETIC AND PAPER FILTER :
LEVELLIG ELEMENTS:
FREQUENCY CONTROL MAIN SPINDEL ENGINE:FüR DIE INNENSCHLEIFEINRICHTUNG
INTERNAL GRINDING SPINDLE:AUF ANFRAGE
INTERNAL GRINDING SPINDLE:AUF ANFRAGE
FIXED STEADY RESTS:10-100 MM, 100-170 MM

PERFORMANCE AND PRECISION DEGREE ROBBI GRINDING MACHINES ARE ACCORDING TO THE INTERNATIONAL PRECISION NORMES ISO 2433. THE TABLE MOVEMENT LINEARITY IS GUARANTEED BY A MAX. DEVIATION OF 0,002 MM/MT. THE OBTAINABLE GRINDING ROUNDNESS IS : 0,4M (**) (**) FOR A TEST WORKPIECE GROUND IN OUR FACTORY DURING MACHINE TESTING THE CNC CONTROLS : WHEEL HEAD MOVEMENT (AXIS X) LONGITUDINAL TABLE MOVEMENT (AXIS Z) WORK HEAD SPINDLE ROTATION SPEED THE AVAILABLE PROGRAMS PERMIT THE PROGRAMMING OF THE FOLLOWING GRINDING CYCLES PLUNGE CYLINDRICAL PASS CYLINDRICAL PASS WITH INTERPOLATION BETWEEN TABLE AND WHEEL MOVEMENT TO GRIND TAPER WORKPIECES RADIUS THE SOFTWARE FOR THE WORKPIECE GRINDING OPERATION IS VERY SIMPLE AND INTUITIVE. TO FACILITATE THE PROGRAMMING THE SOFTWARE IS EQUIPPED WITH AN EXEMPLIFYING GRAPHICS, TO INPUT THE DATA FOR EACH PARAMETER. THE SOFTWARE, HAS BEEN SPECIALLY STUDIED, SO AS TO PERMIT ALSO NON SPECIALISED OPERATORS TO PROGRAMME WITHOUT ANY PROBLEMS COMPLEX WORKPIECES. WHEN THE WORKPIECE GRINDING PROGRAMME HAS BEEN COMPLETED THE CNC WILL AUTOMATICALLY MAKE UP A SUMMARY LIST, WHERE ONLY THE GEOMETRIC PARAMETERS ARE EVIDENCED. THIS LIST PERMITS WITH A GLANCE TO VERIFY THE COMPLETE PROGRAMME; THIS OPERATION IS VERY HELPFUL TO VERIFY EVENTUAL INPUT DATA ERRORS OR TO CHECK RAPIDLY A WORKPIECE PROGRAMME WHEN RELOADED FROM THE FILE. WHILE THE PROGRAMME IS IN EXECUTION, IT IS POSSIBLE TO INTERVENE AND MODIFY IN REAL TIME THE TECHNOLOGIC PARAMETERS, SUCH AS: INCREMENTS, DWELL INVERSION TIMES, SPARKOUT PASSES. ALSO, IT IS POSSIBLE TO INTERVENE WITH THE JOG HANDWHEEL. THE GRINDING MACHINE IS COMPOSED OF : BASE STRUCTURE IN NORMALISED AND STABILISED CAST IRON WITH LARGE GROUND GUIDES. THE LUBRICATION PLANT SUPPLIES A CONSTANT OIL FLOW DISTRIBUTED OVER THE COMPLETE LENGTH OF THE GUIDES. IN THE MIDDLE OF THE BASE, THERE IS POSITIONED THE BALL SCREW FOR THE TABLE LONGITUDINAL MOVEMENT. ON ALL THE LOWER PART OF THE PERIMETER ARE SITUATED THE RECESSES FOR MACHINE LEVELLING. CONSIDERING THE BASE STRUCTURE, USUALLY A FOUNDATION IS NOT REQUIRED. TABLE THE TABLE IS MANUFACTURED IN TWO PARTS, BOTH ARE IN NORMALISED AND STABILISED CAST IRON. THE LOWER PART IS COMPOSED OF WIDE GUIDES WHICH ARE GROUND AND ACCURATELY HAND SCRAPPED, FOR A BETTER SLIDING. THE UPPER PART, IS SWIVELABLE IN THE TWO DIRECTIONS, SUITABLE FOR GRINDING TAPERED WORKPIECES. IT INCLUDES A MICROMETRIC DEVICE WITH CENTESIMAL DIAL GAUGE FOR TAPER CONTROL. WORKHEAD THE STRUCTURE IN NORMALISED, STABILISED AND WELL RIBBED CAST IRON, ALLOWS TO SUPPORT THE WORKPIECE WEIGHT AND THE FORCE GENERATED BY THE GRINDING OPERATION. THE SPINDLE ROTATES ON HIGH PRECISION BALL BEARINGS, GUARANTEEING RESTRICTED TOLERANCE AND MAXIMUM RIGIDITY IN THE WORKING. THE SPINDLE ROTATION IS BY MEANS OF A THREE PHASE MOTOR WITH VARIABLE SPEED CONTROLLED BY AN INVERTER. INTERNAL GRINDING SPINDLE CARRIAGE THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE INTERNAL GRINDING SPINDLE IS LOCATED. THE WORKING FEED, IS OBTAINED BY A RE-CIRCULATING BALL SCREW AND PRELOADED NUT. THE SCREW MOVEMENT IS ASSURED BY A BRUSHLESS MOTOR. THE INCREMENTAL OPTIC RULE GUARANTEES A WHEELHEAD POSITIONING PRECISION OF 0,001 MM. INTERNAL GRINDING SPINDLE AS THERE ARE MANY AND VARIOUS TYPES OF INTERNAL GRINDING SPINDLES, ACCORDING TO THE DIAMETERS AND LENGTHS THAT NEED TO BE GROUND, THE MACHINE IS SUPPLIED WITHOUT AN INTERNAL GRINDING SPINDLE, SO THAT THE CUSTOMER MAY SELECT WHICH TYPE IS MORE SUITABLE FOR HIS JOB. THE MACHINE IS MANUFACTURED STANDARD WITH A BELT TRANSMISSION SUITABLE FOR DIAM. MM. 60, DIAM. MM. 80 AND DIAM. MM. 100 INTERNAL GRINDING SPINDLES. ON REQUEST, HIGH FREQUENCY SPINDLES MAY BE ASSEMBLED. WHEELHEAD FOR FACE GRINDING THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE FACE GRINDING DEVICE IS LOCATED. THE POSITIONING IS OBTAINED BY AN HYDRAULIC CYLINDER. THE DIAMOND DRESSING DEVICE IS ASSEMBLED ON THE FACE GRINDING DEVICE CASING. MANUAL FEED HANDWHEELS ELECTRONIC TYPE, WITH DOUBLE SELECTION OF THE INCREMENTS DIVISION 0.1 - 0.01 AND 0.001 MM. FOR WHEELHEAD AND TABLE MOVEMENTS. DIAMOND DRESSER THE INTERNAL DIAMOND DRESSING DEVICE IS VERY STRONG AND IS POSITIONED ON THE TABLE. IT STARTS HYDRAULICALLY, WHEN THE DRESSING OPERATION IS SELECTED, BY THE OPERATOR. THE DRESSING OPERATION MAY BE CARRIED OUT MANUALLY OR IN AUTOMATIC CYCLE. EQUIPMENT AND ELECTRICAL PLANT IN A COOLED CABINET, SEPARATE FROM THE MACHINE. HYDRAULIC PLANT THE HYDRAULIC POWER PACK, IS SEPARATE FROM THE MACHINE AND ACTIVATES THE HYDRAULIC DIAMOND DRESSER AND FACE GRINDING DEVICE. LUBRICATION PLANT THE LUBRICATION POWER PACK, IS SEPARATE FROM THE MACHINE AND SUPPLIES CONTINUOUS OIL TO THE WHEELHEAD GUIDES. THE RECOVERED OIL IS FILTERED AND THEN RESENT TO THE POWER PACK. THE RE-CIRCULATING BALL SCREW NUT FOR THE WORKING FEED, IS GREASE LUBRICATED. COOLANT PLANT LARGE CAPACITY TANK FOR THE COOLANT WATER, COMPLETE WITH ELECTRIC EQUIPMENT. EQUIPPED WITH COOLANT MAGNET CLEANER AND COOLANT PAPER ROLL CLEANER. PROTECTIONS FOR THE PROTECTION OF THE OPERATOR ALL MOVABLE PARTS ARE COVERED WITH SUITABLE GUARDS. PRECISELY: PROTECTION CASING FOR BELTS, PROTECTION CASING FOR GRINDING WHEEL AND BELLOWS FOR GUIDES. THE MACHINE IS COMPLETELY CLOSED AND THE FRONT PROTECTION IS A SHEET SLIDING DOORS WITH POLY-CARBONATE SHIELDS. A SAFETY DEVICE, DOES NOT PERMIT THE AUTOMATIC CYCLE TO START IF THE FRONT SLIDING DOORS ARE OPEN.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-meuselwitz cnc heavy lathe

built in 1990
start-up 2000 and conversion to cnc control siemens 840 d control. 
nominal turning diameter 1000 mm
tip height 630 mm
top width 5000 mm
max umnlaufdurchmesser support 1100mm

the machine is fully operational.
dimensions approx. 3 m x 12.5 m.

MEUSELWITZ CNC HEAVY LATHE BUILT IN 1990 START-UP 2000 AND CONVERSION TO CNC CONTROL SIEMENS 840 D CONTROL. NOMINAL TURNING DIAMETER 1000 MM TIP HEIGHT 630 MM TOP WIDTH 5000 MM MAX UMNLAUFDURCHMESSER SUPPORT 1100MM THE MACHINE IS FULLY OPERATIONAL. DIMENSIONS APPROX. 3 M X 12.5 M.
Vendedor: Ralph Rosenthal Maschinenlager
Año de construcción: usado
Ubicación: Land-internal diameter:250 mm<br/>grinding depth: mm<br/>swing diameter:460 mm<br/>workpiece diameter:455 (max.) mm<br/>workpiece length - max.:1000 mm<br/>table rotating:-4/+8 °<br/>table speeds:0-4000 mm/min<br/>max. workpiece weight:80 kg<br/>workhead - center taper:5 mk<br/>rotation speed of workhead :0 - 400 1/min<br/>workhead motor:4 kw<br/>3-jaw chuck:250 (selbstschließend) mm<br/>grinding motor:4 kw<br/>coolant pump:2,2 kw<br/>weight approx.:2,4 t<br/>machine dimensions:3200 x 2100 xx<br/>cnc controller:siemens 840 d <br/>servo motors: <br/>autom. sensing device for grinding wheel:option <br/>: <br/>linear scales and ballscrew:in allen achsen <br/>grinding wheel dresser: <br/>: <br/>fully enclosed: <br/>: <br/>technical documentation in german language: <br/>ce-design: <br/>signal lamp: <br/>face grinding attachement:durchmesser 125 mm<br/>clamping chuck:250 (selbstschließend), 1 satz harte backen, 1 satz weiche backen, 1 satz innen mm<br/>: <br/>magnetic and paper filter : <br/>levellig elements: <br/>frequency control main spindel engine:für die innenschleifeinrichtung <br/>internal grinding spindle:rpm 28.000, diam. 60 mm. min. diam. cap. 25 mm. x bohrung 50 mm, max. diam. cap. 100 mm. x bohrung 115 mm . <br/>internal grinding spindle:rpm 10.000, diam. 100 mm, min. diam. cap. 50 mm x bohrung 100 mm, max.diam. cap. 250 mm xbohrung 220 mm <br/>fixed steady rests:10-100 mm, 100-170 mm <br/><br/> performance and precision degree   robbi grinding machines are according to the international precision normes iso 2433. the table movement linearity is guaranteed by a max. deviation of  0,002 mm/mt.  the obtainable grinding roundness is :  0,4m (**)  (**)  for a test workpiece ground in our factory during machine testing        the cnc controls :  wheel head movement  (axis x) longitudinal table movement  (axis z) work head spindle rotation speed    the available programs permit the programming of the following grinding cycles  plunge  cylindrical pass   cylindrical pass with interpolation between table and wheel movement to grind taper workpieces radius   the software for the workpiece grinding operation is very simple and intuitive.   to facilitate the programming the software is equipped with an exemplifying graphics, to input the data for each parameter.      the software, has been specially studied, so as to permit also non specialised operators to programme without any problems complex workpieces.   when the workpiece grinding programme has been completed the cnc will automatically make up a summary list, where only the geometric parameters are evidenced.     this list permits with a  glance to verify the complete programme;  this operation is very helpful to verify eventual input data errors or to check rapidly a workpiece programme when reloaded from the file.        while the programme is in execution, it is possible to intervene and modify in real time the technologic parameters, such as:  increments, dwell inversion times, sparkout passes.   also, it is possible to intervene with the jog handwheel.      the grinding machine is composed of :    base  structure in normalised and stabilised cast iron with large ground guides.    the lubrication plant supplies a constant oil flow distributed over the complete length of the guides.    in the middle of the base, there is positioned the ball screw  for the table longitudinal movement.    on all the lower part of the perimeter are situated the recesses for machine levelling.  considering the base structure, usually a foundation is not required.    table   the table is manufactured in two parts, both are in normalised and stabilised cast iron.     the lower  part is composed of wide guides which are ground and accurately hand scrapped, for a better sliding.       the upper part, is swivelable in the two directions, suitable for grinding tapered workpieces.    it includes  a micrometric device with centesimal dial gauge for taper control.       workhead  the structure in normalised, stabilised and well ribbed cast iron, allows to support the workpiece weight and the force generated by the grinding operation.      the spindle rotates on high precision ball bearings, guaranteeing restricted tolerance and maximum rigidity in the working.      the spindle rotation is by means of a three phase motor with variable speed controlled by an inverter.  internal grinding spindle carriage  the structure is composed of a carriage, where the internal grinding spindle is located.    the working feed, is obtained by a re-circulating ball screw and preloaded nut.    the screw movement is assured by a brushless motor.       the incremental optic rule guarantees a wheelhead positioning precision of 0,001 mm.   internal grinding spindle  as there are many and various types of internal grinding spindles, according to the diameters and lengths that need to be ground, the machine is supplied without an internal grinding spindle, so that the customer may select which type is more suitable for his job.      the machine is manufactured standard with a belt transmission suitable for diam. mm. 60, diam. mm. 80 and diam. mm. 100 internal grinding spindles.      on request,  high frequency spindles may be assembled.   wheelhead  for face grinding the structure is composed of a carriage, where the face grinding device is located.    the positioning is obtained by an hydraulic cylinder.   the diamond dressing device is assembled on the face grinding device casing.   manual feed handwheels  electronic type, with double selection of the increments division 0.1 - 0.01 and 0.001 mm.  for wheelhead and table movements.     diamond dresser  the internal diamond dressing device is very strong and is positioned on the table.     it starts  hydraulically, when the dressing operation is selected, by the operator.     the dressing operation may be carried out manually or in automatic cycle.    equipment and electrical plant  in a cooled cabinet, separate from the machine.      hydraulic plant   the hydraulic power pack, is separate from the machine and activates the hydraulic diamond dresser and face grinding device.       lubrication plant the lubrication power pack, is separate from the machine and supplies continuous oil to the wheelhead guides.   the recovered oil is filtered and then resent to the power pack.     the re-circulating ball screw nut for the working feed, is grease lubricated.           coolant plant  large capacity tank for the coolant water, complete with electric equipment.       equipped with coolant magnet cleaner  and coolant paper roll cleaner.       protections  for the protection of the operator all movable parts are covered with suitable guards.     precisely: protection casing for belts, protection casing for grinding wheel and bellows for guides.   the machine is completely closed and the front protection is a sheet sliding doors with poly-carbonate shields.   a safety device, does not permit the automatic cycle to start if the front sliding doors are open.   INTERNAL DIAMETER:250 MM
GRINDING DEPTH: MM
SWING DIAMETER:460 MM
WORKPIECE DIAMETER:455 (MAX.) MM
WORKPIECE LENGTH - MAX.:1000 MM
TABLE ROTATING:-4/+8 °
TABLE SPEEDS:0-4000 MM/MIN
MAX. WORKPIECE WEIGHT:80 KG
WORKHEAD - CENTER TAPER:5 MK
ROTATION SPEED OF WORKHEAD :0 - 400 1/MIN
WORKHEAD MOTOR:4 KW
3-JAW CHUCK:250 (SELBSTSCHLIEßEND) MM
GRINDING MOTOR:4 KW
COOLANT PUMP:2,2 KW
WEIGHT APPROX.:2,4 T
MACHINE DIMENSIONS:3200 X 2100 XX
CNC CONTROLLER:SIEMENS 840 D
SERVO MOTORS:
AUTOM. SENSING DEVICE FOR GRINDING WHEEL:OPTION
:
LINEAR SCALES AND BALLSCREW:IN ALLEN ACHSEN
GRINDING WHEEL DRESSER:
:
FULLY ENCLOSED:
:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
CE-DESIGN:
SIGNAL LAMP:
FACE GRINDING ATTACHEMENT:DURCHMESSER 125 MM
CLAMPING CHUCK:250 (SELBSTSCHLIEßEND), 1 SATZ HARTE BACKEN, 1 SATZ WEICHE BACKEN, 1 SATZ INNEN MM
:
MAGNETIC AND PAPER FILTER :
LEVELLIG ELEMENTS:
FREQUENCY CONTROL MAIN SPINDEL ENGINE:FüR DIE INNENSCHLEIFEINRICHTUNG
INTERNAL GRINDING SPINDLE:RPM 28.000, DIAM. 60 MM. MIN. DIAM. CAP. 25 MM. X BOHRUNG 50 MM, MAX. DIAM. CAP. 100 MM. X BOHRUNG 115 MM .
INTERNAL GRINDING SPINDLE:RPM 10.000, DIAM. 100 MM, MIN. DIAM. CAP. 50 MM X BOHRUNG 100 MM, MAX.DIAM. CAP. 250 MM XBOHRUNG 220 MM
FIXED STEADY RESTS:10-100 MM, 100-170 MM

PERFORMANCE AND PRECISION DEGREE ROBBI GRINDING MACHINES ARE ACCORDING TO THE INTERNATIONAL PRECISION NORMES ISO 2433. THE TABLE MOVEMENT LINEARITY IS GUARANTEED BY A MAX. DEVIATION OF 0,002 MM/MT. THE OBTAINABLE GRINDING ROUNDNESS IS : 0,4M (**) (**) FOR A TEST WORKPIECE GROUND IN OUR FACTORY DURING MACHINE TESTING THE CNC CONTROLS : WHEEL HEAD MOVEMENT (AXIS X) LONGITUDINAL TABLE MOVEMENT (AXIS Z) WORK HEAD SPINDLE ROTATION SPEED THE AVAILABLE PROGRAMS PERMIT THE PROGRAMMING OF THE FOLLOWING GRINDING CYCLES PLUNGE CYLINDRICAL PASS CYLINDRICAL PASS WITH INTERPOLATION BETWEEN TABLE AND WHEEL MOVEMENT TO GRIND TAPER WORKPIECES RADIUS THE SOFTWARE FOR THE WORKPIECE GRINDING OPERATION IS VERY SIMPLE AND INTUITIVE. TO FACILITATE THE PROGRAMMING THE SOFTWARE IS EQUIPPED WITH AN EXEMPLIFYING GRAPHICS, TO INPUT THE DATA FOR EACH PARAMETER. THE SOFTWARE, HAS BEEN SPECIALLY STUDIED, SO AS TO PERMIT ALSO NON SPECIALISED OPERATORS TO PROGRAMME WITHOUT ANY PROBLEMS COMPLEX WORKPIECES. WHEN THE WORKPIECE GRINDING PROGRAMME HAS BEEN COMPLETED THE CNC WILL AUTOMATICALLY MAKE UP A SUMMARY LIST, WHERE ONLY THE GEOMETRIC PARAMETERS ARE EVIDENCED. THIS LIST PERMITS WITH A GLANCE TO VERIFY THE COMPLETE PROGRAMME; THIS OPERATION IS VERY HELPFUL TO VERIFY EVENTUAL INPUT DATA ERRORS OR TO CHECK RAPIDLY A WORKPIECE PROGRAMME WHEN RELOADED FROM THE FILE. WHILE THE PROGRAMME IS IN EXECUTION, IT IS POSSIBLE TO INTERVENE AND MODIFY IN REAL TIME THE TECHNOLOGIC PARAMETERS, SUCH AS: INCREMENTS, DWELL INVERSION TIMES, SPARKOUT PASSES. ALSO, IT IS POSSIBLE TO INTERVENE WITH THE JOG HANDWHEEL. THE GRINDING MACHINE IS COMPOSED OF : BASE STRUCTURE IN NORMALISED AND STABILISED CAST IRON WITH LARGE GROUND GUIDES. THE LUBRICATION PLANT SUPPLIES A CONSTANT OIL FLOW DISTRIBUTED OVER THE COMPLETE LENGTH OF THE GUIDES. IN THE MIDDLE OF THE BASE, THERE IS POSITIONED THE BALL SCREW FOR THE TABLE LONGITUDINAL MOVEMENT. ON ALL THE LOWER PART OF THE PERIMETER ARE SITUATED THE RECESSES FOR MACHINE LEVELLING. CONSIDERING THE BASE STRUCTURE, USUALLY A FOUNDATION IS NOT REQUIRED. TABLE THE TABLE IS MANUFACTURED IN TWO PARTS, BOTH ARE IN NORMALISED AND STABILISED CAST IRON. THE LOWER PART IS COMPOSED OF WIDE GUIDES WHICH ARE GROUND AND ACCURATELY HAND SCRAPPED, FOR A BETTER SLIDING. THE UPPER PART, IS SWIVELABLE IN THE TWO DIRECTIONS, SUITABLE FOR GRINDING TAPERED WORKPIECES. IT INCLUDES A MICROMETRIC DEVICE WITH CENTESIMAL DIAL GAUGE FOR TAPER CONTROL. WORKHEAD THE STRUCTURE IN NORMALISED, STABILISED AND WELL RIBBED CAST IRON, ALLOWS TO SUPPORT THE WORKPIECE WEIGHT AND THE FORCE GENERATED BY THE GRINDING OPERATION. THE SPINDLE ROTATES ON HIGH PRECISION BALL BEARINGS, GUARANTEEING RESTRICTED TOLERANCE AND MAXIMUM RIGIDITY IN THE WORKING. THE SPINDLE ROTATION IS BY MEANS OF A THREE PHASE MOTOR WITH VARIABLE SPEED CONTROLLED BY AN INVERTER. INTERNAL GRINDING SPINDLE CARRIAGE THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE INTERNAL GRINDING SPINDLE IS LOCATED. THE WORKING FEED, IS OBTAINED BY A RE-CIRCULATING BALL SCREW AND PRELOADED NUT. THE SCREW MOVEMENT IS ASSURED BY A BRUSHLESS MOTOR. THE INCREMENTAL OPTIC RULE GUARANTEES A WHEELHEAD POSITIONING PRECISION OF 0,001 MM. INTERNAL GRINDING SPINDLE AS THERE ARE MANY AND VARIOUS TYPES OF INTERNAL GRINDING SPINDLES, ACCORDING TO THE DIAMETERS AND LENGTHS THAT NEED TO BE GROUND, THE MACHINE IS SUPPLIED WITHOUT AN INTERNAL GRINDING SPINDLE, SO THAT THE CUSTOMER MAY SELECT WHICH TYPE IS MORE SUITABLE FOR HIS JOB. THE MACHINE IS MANUFACTURED STANDARD WITH A BELT TRANSMISSION SUITABLE FOR DIAM. MM. 60, DIAM. MM. 80 AND DIAM. MM. 100 INTERNAL GRINDING SPINDLES. ON REQUEST, HIGH FREQUENCY SPINDLES MAY BE ASSEMBLED. WHEELHEAD FOR FACE GRINDING THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE FACE GRINDING DEVICE IS LOCATED. THE POSITIONING IS OBTAINED BY AN HYDRAULIC CYLINDER. THE DIAMOND DRESSING DEVICE IS ASSEMBLED ON THE FACE GRINDING DEVICE CASING. MANUAL FEED HANDWHEELS ELECTRONIC TYPE, WITH DOUBLE SELECTION OF THE INCREMENTS DIVISION 0.1 - 0.01 AND 0.001 MM. FOR WHEELHEAD AND TABLE MOVEMENTS. DIAMOND DRESSER THE INTERNAL DIAMOND DRESSING DEVICE IS VERY STRONG AND IS POSITIONED ON THE TABLE. IT STARTS HYDRAULICALLY, WHEN THE DRESSING OPERATION IS SELECTED, BY THE OPERATOR. THE DRESSING OPERATION MAY BE CARRIED OUT MANUALLY OR IN AUTOMATIC CYCLE. EQUIPMENT AND ELECTRICAL PLANT IN A COOLED CABINET, SEPARATE FROM THE MACHINE. HYDRAULIC PLANT THE HYDRAULIC POWER PACK, IS SEPARATE FROM THE MACHINE AND ACTIVATES THE HYDRAULIC DIAMOND DRESSER AND FACE GRINDING DEVICE. LUBRICATION PLANT THE LUBRICATION POWER PACK, IS SEPARATE FROM THE MACHINE AND SUPPLIES CONTINUOUS OIL TO THE WHEELHEAD GUIDES. THE RECOVERED OIL IS FILTERED AND THEN RESENT TO THE POWER PACK. THE RE-CIRCULATING BALL SCREW NUT FOR THE WORKING FEED, IS GREASE LUBRICATED. COOLANT PLANT LARGE CAPACITY TANK FOR THE COOLANT WATER, COMPLETE WITH ELECTRIC EQUIPMENT. EQUIPPED WITH COOLANT MAGNET CLEANER AND COOLANT PAPER ROLL CLEANER. PROTECTIONS FOR THE PROTECTION OF THE OPERATOR ALL MOVABLE PARTS ARE COVERED WITH SUITABLE GUARDS. PRECISELY: PROTECTION CASING FOR BELTS, PROTECTION CASING FOR GRINDING WHEEL AND BELLOWS FOR GUIDES. THE MACHINE IS COMPLETELY CLOSED AND THE FRONT PROTECTION IS A SHEET SLIDING DOORS WITH POLY-CARBONATE SHIELDS. A SAFETY DEVICE, DOES NOT PERMIT THE AUTOMATIC CYCLE TO START IF THE FRONT SLIDING DOORS ARE OPEN.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 270 €
Ubicación: Land-planer blades shcã¤rfmaschine gf

working length 450 mm
l x w x h: 1.20 x 80 x 1,60 m
weight approx. 680 kg
built in 1959

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      


 

 PLANER BLADES SHC&ATILDE;&CURREN;RFMASCHINE GF WORKING LENGTH 450 MM L X W X H: 1.20 X 80 X 1,60 M WEIGHT APPROX. 680 KG BUILT IN 1959 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: bürkle ersatzwalze gebraucht, spare roller: sal/slc/dal, bürkle: yes, roller rubber coating: 238, rubber coating length cm: 1415, shore härte: ca.65, approx. thickness of rubber coating in mm: 30, stahlkerndurchmesser ca. mm: 187, creasing on a 1 cm: walze ist gelasert, wedge follower: yes, rubber coating defective: neu, MANUFACTURER: BüRKLE ERSATZWALZE GEBRAUCHT, SPARE ROLLER: SAL/SLC/DAL, BüRKLE: YES, ROLLER RUBBER COATING: 238, RUBBER COATING LENGTH CM: 1415, SHORE HäRTE: CA.65, APPROX. THICKNESS OF RUBBER COATING IN MM: 30, STAHLKERNDURCHMESSER CA. MM: 187, CREASING ON A 1 CM: WALZE IST GELASERT, WEDGE FOLLOWER: YES, RUBBER COATING DEFECTIVE: NEU,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-fine plasma and oxy-fuel cutting machine
knife-cortina 3600 dn.
year of construction: 1999
side travel: 2600 mm-260 mm (burner unit) = 2340 mm
stroke length: 3600 mm, max 3850 mm
track length 6000 mm
possible lateral travel mechanical: 2900 mm
schneidtischauã?enmaã?e 3160mm * 2100mm
cutting source fine plasma hypertherm hd 3070
automatic gas console
inductive height scanning
dust extraction donaldson
 FINE PLASMA AND OXY-FUEL CUTTING MACHINE KNIFE-CORTINA 3600 DN. YEAR OF CONSTRUCTION: 1999 SIDE TRAVEL: 2600 MM-260 MM (BURNER UNIT) = 2340 MM STROKE LENGTH: 3600 MM, MAX 3850 MM TRACK LENGTH 6000 MM POSSIBLE LATERAL TRAVEL MECHANICAL: 2900 MM SCHNEIDTISCHAU&ATILDE;?ENMA&ATILDE;?E 3160MM * 2100MM CUTTING SOURCE FINE PLASMA HYPERTHERM HD 3070 AUTOMATIC GAS CONSOLE INDUCTIVE HEIGHT SCANNING DUST EXTRACTION DONALDSON
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: bürkle ersatzwalze  neu, spare roller: sal/slc/dal, bürkle: yes, roller rubber coating: 238, rubber coating length cm: 1415, shore härte: ca.50, approx. thickness of rubber coating in mm: 30, stahlkerndurchmesser ca. mm: 187, creasing on a 1 cm: walze ist gelasert, wedge follower: yes, rubber coating defective: neu, MANUFACTURER: BüRKLE ERSATZWALZE NEU, SPARE ROLLER: SAL/SLC/DAL, BüRKLE: YES, ROLLER RUBBER COATING: 238, RUBBER COATING LENGTH CM: 1415, SHORE HäRTE: CA.50, APPROX. THICKNESS OF RUBBER COATING IN MM: 30, STAHLKERNDURCHMESSER CA. MM: 187, CREASING ON A 1 CM: WALZE IST GELASERT, WEDGE FOLLOWER: YES, RUBBER COATING DEFECTIVE: NEU,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-replaced the y screw, cards for spindle drive
new tool magazine
control: fanuc series o-t
drehdruchmesser: 300 mm
rotary bed: 530 mm
turning length: 600 mm
tool magazine: 12 positions
spindle speed: 3000 rpm REPLACED THE Y SCREW, CARDS FOR SPINDLE DRIVE NEW TOOL MAGAZINE CONTROL: FANUC SERIES O-T DREHDRUCHMESSER: 300 MM ROTARY BED: 530 MM TURNING LENGTH: 600 MM TOOL MAGAZINE: 12 POSITIONS SPINDLE SPEED: 3000 RPM
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-manufacturer: bürkle ersatzwalze neu, spare roller: slc/dal, bürkle: yes, roller rubber coating: yes, rubber coating length cm: 1416, shore härte: ca.65, approx. thickness of rubber coating in mm: 26, stahlkerndurchmesser ca. mm: 187, MANUFACTURER: BüRKLE ERSATZWALZE NEU, SPARE ROLLER: SLC/DAL, BüRKLE: YES, ROLLER RUBBER COATING: YES, RUBBER COATING LENGTH CM: 1416, SHORE HäRTE: CA.65, APPROX. THICKNESS OF RUBBER COATING IN MM: 26, STAHLKERNDURCHMESSER CA. MM: 187,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-flygt/dirty water submersible pump with suction basket

type: ba-100 gs a231
380v
basket diameter: 70 cm
pump diameter: 40 cm
stuzdurchmesser: 10cm

good condition fully functional can be visited on site and tried out.
shipping abroad.

visit:

basically i would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. please ask questions before you purchase to avoid ambiguity.
for general questions or an appointment for a visit i am at the below telephone number, available.
 
errors in the description and intermediate sale is reserved.

the vat is shown separately on my bills.

shipping with freight forwarding. FLYGT/DIRTY WATER SUBMERSIBLE PUMP WITH SUCTION BASKET TYPE: BA-100 GS A231 380V BASKET DIAMETER: 70 CM PUMP DIAMETER: 40 CM STUZDURCHMESSER: 10CM GOOD CONDITION FULLY FUNCTIONAL CAN BE VISITED ON SITE AND TRIED OUT. SHIPPING ABROAD. VISIT: BASICALLY I WOULD LIKE TO POINT OUT THAT THE ARTICLE MAY BE VIEWED AND TESTED UNDER POWER TO EXCLUDE MISUNDERSTANDINGS, LIKE BEFORE YOU BUY. PLEASE ASK QUESTIONS BEFORE YOU PURCHASE TO AVOID AMBIGUITY. FOR GENERAL QUESTIONS OR AN APPOINTMENT FOR A VISIT I AM AT THE BELOW TELEPHONE NUMBER, AVAILABLE. ERRORS IN THE DESCRIPTION AND INTERMEDIATE SALE IS RESERVED. THE VAT IS SHOWN SEPARATELY ON MY BILLS. SHIPPING WITH FREIGHT FORWARDING.
Vendedor: Erwin Knoll Import & Export
Año de construcción: usado
Ubicación: Land-manufacturer: bürkle ersatzwalze neu, spare roller: dal/sal/slc, bürkle: yes, roller rubber coating: yes, rubber coating length cm: 1420, shore härte: ca.50, approx. thickness of rubber coating in mm: ca.20, stahlkerndurchmesser ca. mm: 187, MANUFACTURER: BüRKLE ERSATZWALZE NEU, SPARE ROLLER: DAL/SAL/SLC, BüRKLE: YES, ROLLER RUBBER COATING: YES, RUBBER COATING LENGTH CM: 1420, SHORE HäRTE: CA.50, APPROX. THICKNESS OF RUBBER COATING IN MM: CA.20, STAHLKERNDURCHMESSER CA. MM: 187,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-plattenbohrwerk pr 160 cnc
manufacturer: union
year: 2007, overhaul: 2018

control siemens... sinumerik 840 d
spindeldrehdrurchmesser... 162mm
x axis... 11000mm
y axis... 3000mm
spindle speed... 5-2800.
axis w... 700mm
axis v... 1000mm
cat 50
power of main engine... 60kw

new x-axis in 2018 (beds, linear guides, rulers).
hydrostatic slide
spindle speed 2800 rpm
accessories:
-rectangular sempuco milling head, 1 ° rotation
machine in excellent condition.
options: internal cooling, plattenarrays, turntable.  PLATTENBOHRWERK PR 160 CNC MANUFACTURER: UNION YEAR: 2007, OVERHAUL: 2018 CONTROL SIEMENS... SINUMERIK 840 D SPINDELDREHDRURCHMESSER... 162MM X AXIS... 11000MM Y AXIS... 3000MM SPINDLE SPEED... 5-2800. AXIS W... 700MM AXIS V... 1000MM CAT 50 POWER OF MAIN ENGINE... 60KW NEW X-AXIS IN 2018 (BEDS, LINEAR GUIDES, RULERS). HYDROSTATIC SLIDE SPINDLE SPEED 2800 RPM ACCESSORIES: -RECTANGULAR SEMPUCO MILLING HEAD, 1 ° ROTATION MACHINE IN EXCELLENT CONDITION. OPTIONS: INTERNAL COOLING, PLATTENARRAYS, TURNTABLE.
Vendedor: Herr Radek Procházka
Año de construcción: usado
Ubicación: Land-manufacturer: bürkle lackersatzwalze neu, spare roller: dal/sal/slc, bürkle: yes, roller rubber coating: yes, rubber coating length cm: 1416, shore härte: ca.35, approx. thickness of rubber coating in mm: 26, stahlkerndurchmesser ca. mm: 187, rubber coating defective: neu, MANUFACTURER: BüRKLE LACKERSATZWALZE NEU, SPARE ROLLER: DAL/SAL/SLC, BüRKLE: YES, ROLLER RUBBER COATING: YES, RUBBER COATING LENGTH CM: 1416, SHORE HäRTE: CA.35, APPROX. THICKNESS OF RUBBER COATING IN MM: 26, STAHLKERNDURCHMESSER CA. MM: 187, RUBBER COATING DEFECTIVE: NEU,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-cnc burning cutting machine with optical control
manufacturer: knife
type: corta arc 2000
year of construction: 1994
cnc control: ks20

optical control with photo desktop ph19
1 oxy-fuel burner
table: 2 x 4 m
career length: 6 m
 CNC BURNING CUTTING MACHINE WITH OPTICAL CONTROL MANUFACTURER: KNIFE TYPE: CORTA ARC 2000 YEAR OF CONSTRUCTION: 1994 CNC CONTROL: KS20 OPTICAL CONTROL WITH PHOTO DESKTOP PH19 1 OXY-FUEL BURNER TABLE: 2 X 4 M CAREER LENGTH: 6 M
Vendedor: METEC GmbH
Año de construcción: usado
Precio: 390 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-general information on the pelletizer
the granulator consists essentially of a 6-based on a base plate, table-shaped frame on which meal housing, motor, and controls are built. 
the grinding housing is divided into horizontal centers. in the for inspection purposes by about 60 â° hydraulically open swivel housing equipped with a hopper upper part, 4 continuous along the entire length of the cutting stator knives are arranged. 
the rotor is equipped with 5 knives of rows of and is driven by a motor via v-belts. in the bottom of the housing, this is embedded screen easily and quickly interchangeable.

technical data technical specifications main machines dimensions units (en)

2,000 x 1,300 footprint
including the height of the machine. hopper 2,500
machine weight: 2,800 kg
size of the filling funnel opening 400 x 680 mm
rotor / cutting diameter 509 mm
rotor length 668 mm
number of rotor blades 18 piece (9., 9 li.)
length 334 mm of rotor blade
number of statormesser 4 piece
length of the statormesser 684 mm
rotor speed 351 u / min
75 kw
engine speed 1.475 u / min
 GENERAL INFORMATION ON THE PELLETIZER THE GRANULATOR CONSISTS ESSENTIALLY OF A 6-BASED ON A BASE PLATE, TABLE-SHAPED FRAME ON WHICH MEAL HOUSING, MOTOR, AND CONTROLS ARE BUILT. THE GRINDING HOUSING IS DIVIDED INTO HORIZONTAL CENTERS. IN THE FOR INSPECTION PURPOSES BY ABOUT 60 &ACIRC;&DEG; HYDRAULICALLY OPEN SWIVEL HOUSING EQUIPPED WITH A HOPPER UPPER PART, 4 CONTINUOUS ALONG THE ENTIRE LENGTH OF THE CUTTING STATOR KNIVES ARE ARRANGED. THE ROTOR IS EQUIPPED WITH 5 KNIVES OF ROWS OF AND IS DRIVEN BY A MOTOR VIA V-BELTS. IN THE BOTTOM OF THE HOUSING, THIS IS EMBEDDED SCREEN EASILY AND QUICKLY INTERCHANGEABLE. TECHNICAL DATA TECHNICAL SPECIFICATIONS MAIN MACHINES DIMENSIONS UNITS (EN) 2,000 X 1,300 FOOTPRINT INCLUDING THE HEIGHT OF THE MACHINE. HOPPER 2,500 MACHINE WEIGHT: 2,800 KG SIZE OF THE FILLING FUNNEL OPENING 400 X 680 MM ROTOR / CUTTING DIAMETER 509 MM ROTOR LENGTH 668 MM NUMBER OF ROTOR BLADES 18 PIECE (9., 9 LI.) LENGTH 334 MM OF ROTOR BLADE NUMBER OF STATORMESSER 4 PIECE LENGTH OF THE STATORMESSER 684 MM ROTOR SPEED 351 U / MIN 75 KW ENGINE SPEED 1.475 U / MIN
Vendedor: RETO RECYCLINGTECHNIK GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: bürkle ersatzlackwalze, spare roller: sal/slc/dal, bürkle: yes, roller rubber coating: yes, rubber coating length cm: 1415, shore härte: ca.50, approx. thickness of rubber coating in mm: ca.25, stahlkerndurchmesser ca. mm: 187, wedge follower: yes, can be reground: yes, MANUFACTURER: BüRKLE ERSATZLACKWALZE, SPARE ROLLER: SAL/SLC/DAL, BüRKLE: YES, ROLLER RUBBER COATING: YES, RUBBER COATING LENGTH CM: 1415, SHORE HäRTE: CA.50, APPROX. THICKNESS OF RUBBER COATING IN MM: CA.25, STAHLKERNDURCHMESSER CA. MM: 187, WEDGE FOLLOWER: YES, CAN BE REGROUND: YES,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MESSER types: