440 ofertas

Año de construcción: usado
Ubicación: Land-5-axis machining center-
fehlmann picomax 825 with erowa pallet automation

control: heidenhein itnc530
year of construction: 2010

procedures/swing areas:
x-axis: 820mm
y-axis: 700mm
z-axis: 450mm
a-axis: 230â° (view compactset 115 â° +/-)
c-axis: 360â° (round table)

rapid traverse:
30 000 mm (linear axes)

spindle speed range: 50-20,000 1/min
interface: hsk63
power: 24kw
torque: 120nm

tool changer:
80 positions (pickup)

facilities: erowa robot easy automation with 10 pallets for workpieces up to 310 x 310 x 300 mm 80 bar ikz 1050 l coolant tank (coolant pressure above m features adjustable)

renishaw omp 40-2 probe

laser tool measurement for d0, 3-80 mm

direct path measurement systems for all axes (xyzac)

actively cooled shaft drives in all axes (xyzac)
actively cooled y carriage

automatic length compensation of main spindle via direct measuring system

5achsen-simultan and spline interpolsation (polynomials 3.grades)

round table with torque drive 5-AXIS MACHINING CENTER- FEHLMANN PICOMAX 825 WITH EROWA PALLET AUTOMATION CONTROL: HEIDENHEIN ITNC530 YEAR OF CONSTRUCTION: 2010 PROCEDURES/SWING AREAS: X-AXIS: 820MM Y-AXIS: 700MM Z-AXIS: 450MM A-AXIS: 230° (VIEW COMPACTSET 115 ° +/-) C-AXIS: 360° (ROUND TABLE) RAPID TRAVERSE: 30 000 MM (LINEAR AXES) SPINDLE SPEED RANGE: 50-20,000 1/MIN INTERFACE: HSK63 POWER: 24KW TORQUE: 120NM TOOL CHANGER: 80 POSITIONS (PICKUP) FACILITIES: EROWA ROBOT EASY AUTOMATION WITH 10 PALLETS FOR WORKPIECES UP TO 310 X 310 X 300 MM 80 BAR IKZ 1050 L COOLANT TANK (COOLANT PRESSURE ABOVE M FEATURES ADJUSTABLE) RENISHAW OMP 40-2 PROBE LASER TOOL MEASUREMENT FOR D0, 3-80 MM DIRECT PATH MEASUREMENT SYSTEMS FOR ALL AXES (XYZAC) ACTIVELY COOLED SHAFT DRIVES IN ALL AXES (XYZAC) ACTIVELY COOLED Y CARRIAGE AUTOMATIC LENGTH COMPENSATION OF MAIN SPINDLE VIA DIRECT MEASURING SYSTEM 5ACHSEN-SIMULTAN AND SPLINE INTERPOLSATION (POLYNOMIALS 3.GRADES) ROUND TABLE WITH TORQUE DRIVE
Vendedor: RG-Tools GmbH
Año de construcción: usado
Ubicación: Land-grinding length:    400 mm<br/>grinding width:    163 mm<br/>workpiece height:        mm<br/>--------------------------------------------------:  <br/>working range surface grinding:  <br/>- grinding length:    400 mm<br/>- grinding width:    163 mm<br/>- vertical travel:    200 mm<br/>table (surface grinding):  <br/>- magnetic table: yes:        <br/>magnetic table:  <br/>- length:    350 mm<br/>- width:    150 mm<br/>- height:     50 mm<br/>spindlestock grinding spindle:  <br/>- x-axis travel:    483 mm<br/>- y-axis travel:    171 mm<br/>- z-axis travel:    279 mm<br/>- spindle revolutions (max):   2800 /min<br/>grinding tool:  <br/>- type of grinding tool: wheel:        <br/>- diameter (max):    178 mm<br/>- borehole: diameter:     32 mm<br/>- width:     13 mm<br/>electrical specifications:  <br/>- total power consumption:    1.5 kw<br/>- mains voltage:    380 v<br/>- mains frequency:     50 hz<br/>dimensions / weights:  <br/>- space requirements -left/right-:   1650 mm<br/>- space requirements -front/back-:    825 mm<br/>- total weight approx.:    800 kg<br/>last overhaul: 2018<br/>electrical and mechanical reconstruction of the machine<br/>delivery time: 4-5 months from order confirmation<br/><br/><br/><br/><br/> GRINDING LENGTH: 400 MM
GRINDING WIDTH: 163 MM
WORKPIECE HEIGHT: MM
--------------------------------------------------:
WORKING RANGE SURFACE GRINDING:
- GRINDING LENGTH: 400 MM
- GRINDING WIDTH: 163 MM
- VERTICAL TRAVEL: 200 MM
TABLE (SURFACE GRINDING):
- MAGNETIC TABLE: YES:
MAGNETIC TABLE:
- LENGTH: 350 MM
- WIDTH: 150 MM
- HEIGHT: 50 MM
SPINDLESTOCK GRINDING SPINDLE:
- X-AXIS TRAVEL: 483 MM
- Y-AXIS TRAVEL: 171 MM
- Z-AXIS TRAVEL: 279 MM
- SPINDLE REVOLUTIONS (MAX): 2800 /MIN
GRINDING TOOL:
- TYPE OF GRINDING TOOL: WHEEL:
- DIAMETER (MAX): 178 MM
- BOREHOLE: DIAMETER: 32 MM
- WIDTH: 13 MM
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 1.5 KW
- MAINS VOLTAGE: 380 V
- MAINS FREQUENCY: 50 HZ
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 1650 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 825 MM
- TOTAL WEIGHT APPROX.: 800 KG
LAST OVERHAUL: 2018
ELECTRICAL AND MECHANICAL RECONSTRUCTION OF THE MACHINE
DELIVERY TIME: 4-5 MONTHS FROM ORDER CONFIRMATION




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Precio: 32.950 €
Ubicación: Land-honeycomb/cassettes used for warehouse, matthiessen, 2-bladed version, total 840 cassettes - -:
 
price from site: â?¬32.950.-(net), excluding disassembly, transport, etc.!
 
manufacturer: matthiessen anlagenbau gmbh
type: rfz type apos
construction number (year): 02 / 88
 
system: 2-bladed version
number of honeycomb/cassettes: 840 cassettes, 420 cartridges left wing, 420 cartridges right wing.
dimensions wing: 20 x 8 metres, about 9 meters high.
construction of a grand piano: 14 cassettes high, 30 cassettes long - first 4
vertical lines of ã  14 cassette "small", then 6 vertical rows ã  14
cassette "large", then again 20 vertical rows of ã  14 cassettes 'small'.
at the end of the wing support elements.
honeycomb/cassette "small" dimensions: h b 440 x 500 x l approx. 8000 mm
honeycomb/cassette "big" dimensions: h b 550 x 630 x l approx. 8000 mm
maximum subject load per honeycomb/cassette: probably 3,000 kg
all cassettes with roller roller cassette input.
 
central storage and retrieval unit between the wings, procedure bar rail, max 1500 kp and 3000 kp.
solenoid/battery magnet mannesmann demag type dbm 34, 2,000 kg.
leuze electronic photocell system.
integrated crane (operated by joystick) with 2 hoists and crossbeams.
transport system with drop table.
30 meters can run rails in the floor ripped out and the new
site are cast again.
 
leading delivery table, firmly mounted, electric chain drive,
to promote material on table of the central unit.
base tray 8 x 8 meters.
 
in addition to selected storage space left and right, as well as barriers of
total investment are part of the offer.
total area: 40.00 x 24.00 m
available as of now.
control unit siemens 3ve6201-4cs11zur electronic order processing
condition: used
available: available now
location: room berlin HONEYCOMB/CASSETTES USED FOR WAREHOUSE, MATTHIESSEN, 2-BLADED VERSION, TOTAL 840 CASSETTES - -: PRICE FROM SITE: &ACIRC;?&NOT;32.950.-(NET), EXCLUDING DISASSEMBLY, TRANSPORT, ETC.! MANUFACTURER: MATTHIESSEN ANLAGENBAU GMBH TYPE: RFZ TYPE APOS CONSTRUCTION NUMBER (YEAR): 02 / 88 SYSTEM: 2-BLADED VERSION NUMBER OF HONEYCOMB/CASSETTES: 840 CASSETTES, 420 CARTRIDGES LEFT WING, 420 CARTRIDGES RIGHT WING. DIMENSIONS WING: 20 X 8 METRES, ABOUT 9 METERS HIGH. CONSTRUCTION OF A GRAND PIANO: 14 CASSETTES HIGH, 30 CASSETTES LONG - FIRST 4 VERTICAL LINES OF &ATILDE;&NBSP; 14 CASSETTE "SMALL", THEN 6 VERTICAL ROWS &ATILDE;&NBSP; 14 CASSETTE "LARGE", THEN AGAIN 20 VERTICAL ROWS OF &ATILDE;&NBSP; 14 CASSETTES 'SMALL'. AT THE END OF THE WING SUPPORT ELEMENTS. HONEYCOMB/CASSETTE "SMALL" DIMENSIONS: H B 440 X 500 X L APPROX. 8000 MM HONEYCOMB/CASSETTE "BIG" DIMENSIONS: H B 550 X 630 X L APPROX. 8000 MM MAXIMUM SUBJECT LOAD PER HONEYCOMB/CASSETTE: PROBABLY 3,000 KG ALL CASSETTES WITH ROLLER ROLLER CASSETTE INPUT. CENTRAL STORAGE AND RETRIEVAL UNIT BETWEEN THE WINGS, PROCEDURE BAR RAIL, MAX 1500 KP AND 3000 KP. SOLENOID/BATTERY MAGNET MANNESMANN DEMAG TYPE DBM 34, 2,000 KG. LEUZE ELECTRONIC PHOTOCELL SYSTEM. INTEGRATED CRANE (OPERATED BY JOYSTICK) WITH 2 HOISTS AND CROSSBEAMS. TRANSPORT SYSTEM WITH DROP TABLE. 30 METERS CAN RUN RAILS IN THE FLOOR RIPPED OUT AND THE NEW SITE ARE CAST AGAIN. LEADING DELIVERY TABLE, FIRMLY MOUNTED, ELECTRIC CHAIN DRIVE, TO PROMOTE MATERIAL ON TABLE OF THE CENTRAL UNIT. BASE TRAY 8 X 8 METERS. IN ADDITION TO SELECTED STORAGE SPACE LEFT AND RIGHT, AS WELL AS BARRIERS OF TOTAL INVESTMENT ARE PART OF THE OFFER. TOTAL AREA: 40.00 X 24.00 M AVAILABLE AS OF NOW. CONTROL UNIT SIEMENS 3VE6201-4CS11ZUR ELECTRONIC ORDER PROCESSING CONDITION: USED AVAILABLE: AVAILABLE NOW LOCATION: ROOM BERLIN
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: used machinery auction RESALE 13.340 €
Ubicación: Land-weight approx.: 5000 kg<br/>dimensions (l x w x h) approx.: 3200 x 2800 x 2750 mm<br/>description: fehlmann picomax 82 - cnc milling machine<br> <br> working range travel lengthwise x-axis 685 mm, travel crosswise y-axis 315 mm, travel machine head z-axes 540 mm<br> feed rate rapid traverse x and y axis 1 - 12000 mm/min, z axis 1 - 15000 mm/min, feed force x and y axis 6000 n, z axis 12000 n, rapid traverse x and y axis 12 m/min, z axis 15 m/min<br> direct measuring system via linear scale axis x / y / z, resolution in x-, y- and z-axis 0. 001 mm<br> position tolerance tp in x- and y-axis 0. 015 mm, position tolerance tp in z-axis 0. 025 mm, position deviation width ps 0. 002 mm<br> clamping surface (l x w) 1230 x 410 mm, t-slots number 7, t-slots width 12-h8 mm, distance 50 mm, permissible table load 250 kg, table height from floor 1010 mm, distance table spindle nose (min - max) 0 - 125 - 670 mm, horizontal overhang 450 mm<br> tool holder for steep taper shank sk 30 / din 69871a, with tightening bolt din 69872, tool clamp (hydraulically actuated pull-in force 5000 n, repeat accuracy 0. 002 mm, speed range (infinitely variable) 50 - 16000 min-1, drive power (60% ed) 11 kw, max. tool speed (max. tool life) 50 - 16000 rpm, max. tool life (max. tool life) 50 - 16000 rpm, max. tool life (max. tool life) 50 - 16000 rpm, max. tool life (max. tool life) 50 - 16000 rpm, max. tool life (max. tool life) 50 - 16000 rpm, max. tool life (max. tool life) 50 - 16 - 16000 rpm, max. tool life (max. tool life) 50 - 16 - 16000 rpm, max. tool life (max. tool life) 50 - 16 - 25 - 25 mm, max. tool life (max. tool life) 50 - 25 mm. torque 72 nm<br> drilling capacity in steel diameter 25 mm, milling capacity in steel / aluminium 100 / 700 cm3 / min, thread cutting in steel / aluminium m20 / m24<br> tool change magazine type plate, magazine places 32, max. tool diameter all positions occupied diameter 63 mm, free positions necessary diameter 100 mm, max. tool lengths 260 mm, max. tool weig WEIGHT APPROX.: 5000 KG
DIMENSIONS (L X W X H) APPROX.: 3200 X 2800 X 2750 MM
DESCRIPTION: FEHLMANN PICOMAX 82 - CNC MILLING MACHINE

WORKING RANGE TRAVEL LENGTHWISE X-AXIS 685 MM, TRAVEL CROSSWISE Y-AXIS 315 MM, TRAVEL MACHINE HEAD Z-AXES 540 MM
FEED RATE RAPID TRAVERSE X AND Y AXIS 1 - 12000 MM/MIN, Z AXIS 1 - 15000 MM/MIN, FEED FORCE X AND Y AXIS 6000 N, Z AXIS 12000 N, RAPID TRAVERSE X AND Y AXIS 12 M/MIN, Z AXIS 15 M/MIN
DIRECT MEASURING SYSTEM VIA LINEAR SCALE AXIS X / Y / Z, RESOLUTION IN X-, Y- AND Z-AXIS 0. 001 MM
POSITION TOLERANCE TP IN X- AND Y-AXIS 0. 015 MM, POSITION TOLERANCE TP IN Z-AXIS 0. 025 MM, POSITION DEVIATION WIDTH PS 0. 002 MM
CLAMPING SURFACE (L X W) 1230 X 410 MM, T-SLOTS NUMBER 7, T-SLOTS WIDTH 12-H8 MM, DISTANCE 50 MM, PERMISSIBLE TABLE LOAD 250 KG, TABLE HEIGHT FROM FLOOR 1010 MM, DISTANCE TABLE SPINDLE NOSE (MIN - MAX) 0 - 125 - 670 MM, HORIZONTAL OVERHANG 450 MM
TOOL HOLDER FOR STEEP TAPER SHANK SK 30 / DIN 69871A, WITH TIGHTENING BOLT DIN 69872, TOOL CLAMP (HYDRAULICALLY ACTUATED PULL-IN FORCE 5000 N, REPEAT ACCURACY 0. 002 MM, SPEED RANGE (INFINITELY VARIABLE) 50 - 16000 MIN-1, DRIVE POWER (60% ED) 11 KW, MAX. TOOL SPEED (MAX. TOOL LIFE) 50 - 16000 RPM, MAX. TOOL LIFE (MAX. TOOL LIFE) 50 - 16000 RPM, MAX. TOOL LIFE (MAX. TOOL LIFE) 50 - 16000 RPM, MAX. TOOL LIFE (MAX. TOOL LIFE) 50 - 16000 RPM, MAX. TOOL LIFE (MAX. TOOL LIFE) 50 - 16000 RPM, MAX. TOOL LIFE (MAX. TOOL LIFE) 50 - 16 - 16000 RPM, MAX. TOOL LIFE (MAX. TOOL LIFE) 50 - 16 - 16000 RPM, MAX. TOOL LIFE (MAX. TOOL LIFE) 50 - 16 - 25 - 25 MM, MAX. TOOL LIFE (MAX. TOOL LIFE) 50 - 25 MM. TORQUE 72 NM
DRILLING CAPACITY IN STEEL DIAMETER 25 MM, MILLING CAPACITY IN STEEL / ALUMINIUM 100 / 700 CM3 / MIN, THREAD CUTTING IN STEEL / ALUMINIUM M20 / M24
TOOL CHANGE MAGAZINE TYPE PLATE, MAGAZINE PLACES 32, MAX. TOOL DIAMETER ALL POSITIONS OCCUPIED DIAMETER 63 MM, FREE POSITIONS NECESSARY DIAMETER 100 MM, MAX. TOOL LENGTHS 260 MM, MAX. TOOL WEIG
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine demag dnc ii 175

this demag injection molding machine was a testing machine in a petrochemical factory and afterwards it served several years as a training machine in a local technical university. the machine is used in laboratory test production and training purposes only, not in actual production ever. we dismantled it in 2008 and took it to our warehouse where it is today. it looks to be in good condition.

technical description:
manufacturer: mannesmann demag kunstofftechnik, germany
type: m-type demag dnc ii 175
year: 1981 – very little used
screw diameter: 52 mm, 16d
clamping force: 1750kn
injection volume: 380 cm3
control: microprocessor control system
measurements: 6.6 x 1.5 x 2.2 m (lxwxh)
weight: 7.800 kg
condition: very good – operational
typical products: pipe fittings, house hold articles, technical products   INJECTION MOLDING MACHINE DEMAG DNC II 175 THIS DEMAG INJECTION MOLDING MACHINE WAS A TESTING MACHINE IN A PETROCHEMICAL FACTORY AND AFTERWARDS IT SERVED SEVERAL YEARS AS A TRAINING MACHINE IN A LOCAL TECHNICAL UNIVERSITY. THE MACHINE IS USED IN LABORATORY TEST PRODUCTION AND TRAINING PURPOSES ONLY, NOT IN ACTUAL PRODUCTION EVER. WE DISMANTLED IT IN 2008 AND TOOK IT TO OUR WAREHOUSE WHERE IT IS TODAY. IT LOOKS TO BE IN GOOD CONDITION. TECHNICAL DESCRIPTION: MANUFACTURER: MANNESMANN DEMAG KUNSTOFFTECHNIK, GERMANY TYPE: M-TYPE DEMAG DNC II 175 YEAR: 1981 – VERY LITTLE USED SCREW DIAMETER: 52 MM, 16D CLAMPING FORCE: 1750KN INJECTION VOLUME: 380 CM3 CONTROL: MICROPROCESSOR CONTROL SYSTEM MEASUREMENTS: 6.6 X 1.5 X 2.2 M (LXWXH) WEIGHT: 7.800 KG CONDITION: VERY GOOD – OPERATIONAL TYPICAL PRODUCTS: PIPE FITTINGS, HOUSE HOLD ARTICLES, TECHNICAL PRODUCTS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec vertiwrap compl. large filling system fully automatic premade bags 10-50kg<br><br>fully automatic vertical system: automatic weighing, automatic bag feeding, bag opening, filling, shifting and output. guiding into automatic bag sewing machine where it is sewed. completely unmanned packaging process. easy touch screen operation, quick format change. <br><br>- specifications: measuring range: 10-50kg | packaging material: hard plastic woven bags | max. speed of the machine in neutral: 12 cycles/minute | compressed air: 6bar, 0.6m³ | machine weight: 1.600kg | power supply: 5kw, 380v.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP COMPL. LARGE FILLING SYSTEM FULLY AUTOMATIC PREMADE BAGS 10-50KG

FULLY AUTOMATIC VERTICAL SYSTEM: AUTOMATIC WEIGHING, AUTOMATIC BAG FEEDING, BAG OPENING, FILLING, SHIFTING AND OUTPUT. GUIDING INTO AUTOMATIC BAG SEWING MACHINE WHERE IT IS SEWED. COMPLETELY UNMANNED PACKAGING PROCESS. EASY TOUCH SCREEN OPERATION, QUICK FORMAT CHANGE.

- SPECIFICATIONS: MEASURING RANGE: 10-50KG | PACKAGING MATERIAL: HARD PLASTIC WOVEN BAGS | MAX. SPEED OF THE MACHINE IN NEUTRAL: 12 CYCLES/MINUTE | COMPRESSED AIR: 6BAR, 0.6M³ | MACHINE WEIGHT: 1.600KG | POWER SUPPLY: 5KW, 380V.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 4.117 €
Ubicación: Land-technical data:

brand: kunzmann

type: uf 6 n

year: 1979

x trail 450 mm
y way 500 mm
z-way 200 mm
speed range - horizontal 30-1280 rpm
speed range - vertical 50-2150 rpm
head swivel +/-90 â°
iso 30 spindle adaptor
table size 865 x 265 mm TECHNICAL DATA: BRAND: KUNZMANN TYPE: UF 6 N YEAR: 1979 X TRAIL 450 MM Y WAY 500 MM Z-WAY 200 MM SPEED RANGE - HORIZONTAL 30-1280 RPM SPEED RANGE - VERTICAL 50-2150 RPM HEAD SWIVEL +/-90 &ACIRC;&DEG; ISO 30 SPINDLE ADAPTOR TABLE SIZE 865 X 265 MM
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Ubicación: Land-capacity: 419  hl<br />diameter: 5700  mm    <br />material:  stainless steel<br />equipment: 4 armed rake with 1 grains diverter, drive from below, 2 spent grains flaps with mit 2 spent grains pumps (manufacturer: ponndorf, y.o.c.:  2011)<br /> CAPACITY: 419 HL
DIAMETER: 5700 MM
MATERIAL: STAINLESS STEEL
EQUIPMENT: 4 ARMED RAKE WITH 1 GRAINS DIVERTER, DRIVE FROM BELOW, 2 SPENT GRAINS FLAPS WITH MIT 2 SPENT GRAINS PUMPS (MANUFACTURER: PONNDORF, Y.O.C.: 2011)
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-traverse paths x - 1040 mm / y - 600 mm / z - 500 mm
table 1250 x 600 mm
speeds max. 8000 rpm installed make weis since 2017
changer 30 tools
recording sk 40 - internal coolant supply

4.achse full 4th axis lehmann 360.000 pos.

TRAVERSE PATHS X - 1040 MM / Y - 600 MM / Z - 500 MM TABLE 1250 X 600 MM SPEEDS MAX. 8000 RPM INSTALLED MAKE WEIS SINCE 2017 CHANGER 30 TOOLS RECORDING SK 40 - INTERNAL COOLANT SUPPLY 4.ACHSE FULL 4TH AXIS LEHMANN 360.000 POS.
Vendedor: Moser Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-x-travel: 800 mm<br/>y-travel: 800 mm<br/>z-travel: 1000 mm<br/>control: sin840d sl <br/>feed x/y/z-axis: 1 - 60.000 mm/min<br/>rapid traverse x/y/z: 60,00 m/min<br/>acceleration x/y/z: 8,00 m/s²<br/>feed force x/y/z axis: 10.000 n<br/>spindle turning speed - stepless: 1 - 16.000 u/min<br/>power capacity at 100 % load: 30,00 kw<br/>power capacity at 40 % load: 34,00 kw<br/>max. torque on the spindle: 60 / 85 nm<br/>tool taper: hsk63 <br/>b-axis: 360 x 0,001 °<br/>table-size: 520 mm<br/>table load: 0,50 t<br/>max. workpiece diameter: 900 mm<br/>a-axis: -180 / +90 x 0,001 °<br/>toolpiece magazine: chain magazine: 88 stück<br/>tool diameter: 72 mm<br/>tool diameter with 2 vacant positions: 150 mm<br/>tool length - max.: 600 mm<br/>weight of tools max.: 12,00 kg<br/>cut to cut time: 3,00 sec<br/>total power requirement: 30,00 kw<br/>weight of the machine ca.: 13,00 t<br/>dimensions of the machine ca.: 3,00 x 6,00 x h4,00 m<br/>5 axes machining center with siemens sin 840d sl. control<br/>z - axes is constructed in a cross tape manner with 2 drives and carries <br/>the two bearings for the a - axis (bridge swings) which can be stopped<br/>hydraulically by a brake disc.<br/>in addition the bridge of the a - axis has a b - axis integrated which acts as<br/>a round table.<br/>machine can be inspected under power.<br/><br/><br/><br/><br/> X-TRAVEL: 800 MM
Y-TRAVEL: 800 MM
Z-TRAVEL: 1000 MM
CONTROL: SIN840D SL
FEED X/Y/Z-AXIS: 1 - 60.000 MM/MIN
RAPID TRAVERSE X/Y/Z: 60,00 M/MIN
ACCELERATION X/Y/Z: 8,00 M/S²
FEED FORCE X/Y/Z AXIS: 10.000 N
SPINDLE TURNING SPEED - STEPLESS: 1 - 16.000 U/MIN
POWER CAPACITY AT 100 % LOAD: 30,00 KW
POWER CAPACITY AT 40 % LOAD: 34,00 KW
MAX. TORQUE ON THE SPINDLE: 60 / 85 NM
TOOL TAPER: HSK63
B-AXIS: 360 X 0,001 °
TABLE-SIZE: 520 MM
TABLE LOAD: 0,50 T
MAX. WORKPIECE DIAMETER: 900 MM
A-AXIS: -180 / +90 X 0,001 °
TOOLPIECE MAGAZINE: CHAIN MAGAZINE: 88 STüCK
TOOL DIAMETER: 72 MM
TOOL DIAMETER WITH 2 VACANT POSITIONS: 150 MM
TOOL LENGTH - MAX.: 600 MM
WEIGHT OF TOOLS MAX.: 12,00 KG
CUT TO CUT TIME: 3,00 SEC
TOTAL POWER REQUIREMENT: 30,00 KW
WEIGHT OF THE MACHINE CA.: 13,00 T
DIMENSIONS OF THE MACHINE CA.: 3,00 X 6,00 X H4,00 M
5 AXES MACHINING CENTER WITH SIEMENS SIN 840D SL. CONTROL
Z - AXES IS CONSTRUCTED IN A CROSS TAPE MANNER WITH 2 DRIVES AND CARRIES
THE TWO BEARINGS FOR THE A - AXIS (BRIDGE SWINGS) WHICH CAN BE STOPPED
HYDRAULICALLY BY A BRAKE DISC.
IN ADDITION THE BRIDGE OF THE A - AXIS HAS A B - AXIS INTEGRATED WHICH ACTS AS
A ROUND TABLE.
MACHINE CAN BE INSPECTED UNDER POWER.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-brewhouse huppmann 410 hl / brew - approx 1 m hl / year

brewhouse made by huppmann in year 2000, 410 hl/brew, with a mash filter, made by nordon in year 1997. it is complete line, in good condition, not dismantled, it is possible to test the equipment. the brewhouse is controlled by pc.

installed mash filter nordon improves the performance of brewing process (compare to filer tank) and allows the use in the production low quality (dusty) malt and the filtration speed and quality do not change.

capacity: mash tank - 410 hl/brew, malt 9 tn. per brew, 12 brews per day
bottle neck is mash tank. brewhouse capacity can be doubled by installation of second mash tank.

list of equipment:
- mash tank huppmann, 410 hl, 4200 mm diameter, malt 9 tons per brew, capacity 12 brews per day, year 2002
- mash tank heat exchanger, api schmidt-bretten type: si 108 sbl, year 2000
- ferments dosing system by prominent with 3 x 500 liter pvc tanks
- mash filter nordon, 53 plates, 1997
- wort collecting tank, horizontal, 410 hl
- wort kettle huppmann, 930 hl, 5200 mm diameter, the heating boiler surface - 55 m2, 2002. boiling of the wort runs at high pressure that allows to reach temperature of 104 - 106 c,
- hop dosing tanks, huppmann 3 x 235 liters, year 1998
- heat exchanger of wort kettle, apv type k55,year 1998
- whirlpool huppmann, 650 hl, diameter 5800 mm, year 2002
- press-filter buffer tanks, huppmann, 1999
- tank for collecting protein
- piping, pumps, valves, etc.
- computer control system of brewhouse based on the pc.   BREWHOUSE HUPPMANN 410 HL / BREW - APPROX 1 M HL / YEAR BREWHOUSE MADE BY HUPPMANN IN YEAR 2000, 410 HL/BREW, WITH A MASH FILTER, MADE BY NORDON IN YEAR 1997. IT IS COMPLETE LINE, IN GOOD CONDITION, NOT DISMANTLED, IT IS POSSIBLE TO TEST THE EQUIPMENT. THE BREWHOUSE IS CONTROLLED BY PC. INSTALLED MASH FILTER NORDON IMPROVES THE PERFORMANCE OF BREWING PROCESS (COMPARE TO FILER TANK) AND ALLOWS THE USE IN THE PRODUCTION LOW QUALITY (DUSTY) MALT AND THE FILTRATION SPEED AND QUALITY DO NOT CHANGE. CAPACITY: MASH TANK - 410 HL/BREW, MALT 9 TN. PER BREW, 12 BREWS PER DAY BOTTLE NECK IS MASH TANK. BREWHOUSE CAPACITY CAN BE DOUBLED BY INSTALLATION OF SECOND MASH TANK. LIST OF EQUIPMENT: - MASH TANK HUPPMANN, 410 HL, 4200 MM DIAMETER, MALT 9 TONS PER BREW, CAPACITY 12 BREWS PER DAY, YEAR 2002 - MASH TANK HEAT EXCHANGER, API SCHMIDT-BRETTEN TYPE: SI 108 SBL, YEAR 2000 - FERMENTS DOSING SYSTEM BY PROMINENT WITH 3 X 500 LITER PVC TANKS - MASH FILTER NORDON, 53 PLATES, 1997 - WORT COLLECTING TANK, HORIZONTAL, 410 HL - WORT KETTLE HUPPMANN, 930 HL, 5200 MM DIAMETER, THE HEATING BOILER SURFACE - 55 M2, 2002. BOILING OF THE WORT RUNS AT HIGH PRESSURE THAT ALLOWS TO REACH TEMPERATURE OF 104 - 106 C, - HOP DOSING TANKS, HUPPMANN 3 X 235 LITERS, YEAR 1998 - HEAT EXCHANGER OF WORT KETTLE, APV TYPE K55,YEAR 1998 - WHIRLPOOL HUPPMANN, 650 HL, DIAMETER 5800 MM, YEAR 2002 - PRESS-FILTER BUFFER TANKS, HUPPMANN, 1999 - TANK FOR COLLECTING PROTEIN - PIPING, PUMPS, VALVES, ETC. - COMPUTER CONTROL SYSTEM OF BREWHOUSE BASED ON THE PC.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-x-travel: 800 mm<br/>y-travel: 800 mm<br/>z-travel: 1000 mm<br/>control: sin840d sl <br/>feed x/y/z-axis: 1 - 60.000 mm/min<br/>rapid traverse x/y/z: 60,00 m/min<br/>acceleration x/y/z: 8,00 m/s²<br/>feed force x/y/z axis: 10.000 n<br/>spindle turning speed - stepless: 1 - 16.000 u/min<br/>power capacity at 100 % load: 30,00 kw<br/>power capacity at 40 % load: 34,00 kw<br/>max. torque on the spindle: 60 / 85 nm<br/>tool taper: hsk63 <br/>b-axis: 360 x 0,001 °<br/>table-size: 520 mm<br/>table load: 0,50 t<br/>max. workpiece diameter: 900 mm<br/>a-axis: -180 / +90 x 0,001 °<br/>toolpiece magazine: chain magazine: 88 stück<br/>tool diameter: 72 mm<br/>tool diameter with 2 vacant positions: 150 mm<br/>tool length - max.: 600 mm<br/>weight of tools max.: 12,00 kg<br/>cut to cut time: 3,00 sec<br/>total power requirement: 30,00 kw<br/>weight of the machine ca.: 13,00 t<br/>dimensions of the machine ca.: 3,00 x 6,00 x h4,00 m<br/>5 axes machining center with siemens sin 840d sl. control <br/>z - axes is constructed in a cross tape manner with 2 drives and carries <br/>the two bearings for the a - axis (bridge swings) which can be stopped <br/>hydraulically by a brake disc.<br/>in addition the bridge of the a - axis has a b - axis integrated which acts as <br/>a round table.<br/>machine can be inspected under power.<br/><br/><br/><br/><br/> X-TRAVEL: 800 MM
Y-TRAVEL: 800 MM
Z-TRAVEL: 1000 MM
CONTROL: SIN840D SL
FEED X/Y/Z-AXIS: 1 - 60.000 MM/MIN
RAPID TRAVERSE X/Y/Z: 60,00 M/MIN
ACCELERATION X/Y/Z: 8,00 M/S²
FEED FORCE X/Y/Z AXIS: 10.000 N
SPINDLE TURNING SPEED - STEPLESS: 1 - 16.000 U/MIN
POWER CAPACITY AT 100 % LOAD: 30,00 KW
POWER CAPACITY AT 40 % LOAD: 34,00 KW
MAX. TORQUE ON THE SPINDLE: 60 / 85 NM
TOOL TAPER: HSK63
B-AXIS: 360 X 0,001 °
TABLE-SIZE: 520 MM
TABLE LOAD: 0,50 T
MAX. WORKPIECE DIAMETER: 900 MM
A-AXIS: -180 / +90 X 0,001 °
TOOLPIECE MAGAZINE: CHAIN MAGAZINE: 88 STüCK
TOOL DIAMETER: 72 MM
TOOL DIAMETER WITH 2 VACANT POSITIONS: 150 MM
TOOL LENGTH - MAX.: 600 MM
WEIGHT OF TOOLS MAX.: 12,00 KG
CUT TO CUT TIME: 3,00 SEC
TOTAL POWER REQUIREMENT: 30,00 KW
WEIGHT OF THE MACHINE CA.: 13,00 T
DIMENSIONS OF THE MACHINE CA.: 3,00 X 6,00 X H4,00 M
5 AXES MACHINING CENTER WITH SIEMENS SIN 840D SL. CONTROL
Z - AXES IS CONSTRUCTED IN A CROSS TAPE MANNER WITH 2 DRIVES AND CARRIES
THE TWO BEARINGS FOR THE A - AXIS (BRIDGE SWINGS) WHICH CAN BE STOPPED
HYDRAULICALLY BY A BRAKE DISC.
IN ADDITION THE BRIDGE OF THE A - AXIS HAS A B - AXIS INTEGRATED WHICH ACTS AS
A ROUND TABLE.
MACHINE CAN BE INSPECTED UNDER POWER.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-scharmann fb 132 boring machine built in 1964
total size: 5400 x 4400 x 3500 (lxwxh) approx.
bowling in the spindle: metr. 80 milling spindle / sa 60
procedures: 1827/1417/1251 (x/y/z
 SCHARMANN FB 132 BORING MACHINE BUILT IN 1964 TOTAL SIZE: 5400 X 4400 X 3500 (LXWXH) APPROX. BOWLING IN THE SPINDLE: METR. 80 MILLING SPINDLE / SA 60 PROCEDURES: 1827/1417/1251 (X/Y/Z
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 800 mm<br/>y-travel: 800 mm<br/>z-travel: 1000 mm<br/>control: sin840d sl <br/>feed x/y/z-axis: 1 - 60.000 mm/min<br/>rapid traverse x/y/z: 60,00 m/min<br/>acceleration x/y/z: 8,00 m/s²<br/>feed force x/y/z axis: 10.000 n<br/>spindle turning speed - stepless: 1 - 16.000 u/min<br/>power capacity at 100 % load: 30,00 kw<br/>power capacity at 40 % load: 34,00 kw<br/>max. torque on the spindle: 60 / 85 nm<br/>tool taper: hsk63 <br/>b-axis: 360 x 0,001 °<br/>table-size: 520 mm<br/>table load: 0,50 t<br/>max. workpiece diameter: 900 mm<br/>a-axis: -180 / +90 x 0,001 °<br/>toolpiece magazine: chain magazine: 88 stück<br/>tool diameter: 72 mm<br/>tool diameter with 2 vacant positions: 150 mm<br/>tool length - max.: 600 mm<br/>weight of tools max.: 12,00 kg<br/>cut to cut time: 3,00 sec<br/>total power requirement: 30,00 kw<br/>weight of the machine ca.: 13,00 t<br/>dimensions of the machine ca.: 3,00 x 6,00 x h4,00 m<br/>5 axes machining center with siemens sin 840d sl. control<br/>z - axes is constructed in a cross tape manner with 2 drives and carries <br/>the two bearings for the a - axis (bridge swings) which can be stopped<br/>hydraulically by a brake disc.<br/>in addition the bridge of the a - axis has a b - axis integrated which acts as<br/>a round table.<br/>machine can be inspected under power.<br/><br/><br/><br/><br/> X-TRAVEL: 800 MM
Y-TRAVEL: 800 MM
Z-TRAVEL: 1000 MM
CONTROL: SIN840D SL
FEED X/Y/Z-AXIS: 1 - 60.000 MM/MIN
RAPID TRAVERSE X/Y/Z: 60,00 M/MIN
ACCELERATION X/Y/Z: 8,00 M/S²
FEED FORCE X/Y/Z AXIS: 10.000 N
SPINDLE TURNING SPEED - STEPLESS: 1 - 16.000 U/MIN
POWER CAPACITY AT 100 % LOAD: 30,00 KW
POWER CAPACITY AT 40 % LOAD: 34,00 KW
MAX. TORQUE ON THE SPINDLE: 60 / 85 NM
TOOL TAPER: HSK63
B-AXIS: 360 X 0,001 °
TABLE-SIZE: 520 MM
TABLE LOAD: 0,50 T
MAX. WORKPIECE DIAMETER: 900 MM
A-AXIS: -180 / +90 X 0,001 °
TOOLPIECE MAGAZINE: CHAIN MAGAZINE: 88 STüCK
TOOL DIAMETER: 72 MM
TOOL DIAMETER WITH 2 VACANT POSITIONS: 150 MM
TOOL LENGTH - MAX.: 600 MM
WEIGHT OF TOOLS MAX.: 12,00 KG
CUT TO CUT TIME: 3,00 SEC
TOTAL POWER REQUIREMENT: 30,00 KW
WEIGHT OF THE MACHINE CA.: 13,00 T
DIMENSIONS OF THE MACHINE CA.: 3,00 X 6,00 X H4,00 M
5 AXES MACHINING CENTER WITH SIEMENS SIN 840D SL. CONTROL
Z - AXES IS CONSTRUCTED IN A CROSS TAPE MANNER WITH 2 DRIVES AND CARRIES
THE TWO BEARINGS FOR THE A - AXIS (BRIDGE SWINGS) WHICH CAN BE STOPPED
HYDRAULICALLY BY A BRAKE DISC.
IN ADDITION THE BRIDGE OF THE A - AXIS HAS A B - AXIS INTEGRATED WHICH ACTS AS
A ROUND TABLE.
MACHINE CAN BE INSPECTED UNDER POWER.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-hartmann presse mod. acp-u-e64-1250-me / bj 68-2003 / 64 t / 260 bar / table 1250 mm / height 500 / hub 250 / 300 stand projection / 7.5 kw / digital mod. dnc 60 / akas security system / good condition
fe.gi.maschinen.sbg.at

hartmann press mod. acp-u-e64-1250-me / year 68 2003 / 64 t / 260 bar / table 1250 mm / install height 500 stroke 250 stator projection 300 / 7.5 kw / digital mod. dnc 60 / / akas safety system / good condition fe.gi.maschinen.sbg.at HARTMANN PRESSE MOD. ACP-U-E64-1250-ME / BJ 68-2003 / 64 T / 260 BAR / TABLE 1250 MM / HEIGHT 500 / HUB 250 / 300 STAND PROJECTION / 7.5 KW / DIGITAL MOD. DNC 60 / AKAS SECURITY SYSTEM / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT HARTMANN PRESS MOD. ACP-U-E64-1250-ME / YEAR 68 2003 / 64 T / 260 BAR / TABLE 1250 MM / INSTALL HEIGHT 500 STROKE 250 STATOR PROJECTION 300 / 7.5 KW / DIGITAL MOD. DNC 60 / / AKAS SAFETY SYSTEM / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Precio: used machinery auction RESALE 2.400 €
Ubicación: Land-dimensions (l x w x h) approx.: 7300 x 2900 x 300 mm<br/>description: - machine no.: 11202<br> - air consumption at 2 bar and air nozzle diameter 7 mm: 1300 l/min<br> - air consumption at 6 bar and nozzle diameter 7 mm: 3300 l/min<br> - nozzles borkarbid: 13 mm<br> - compressed air connection: 6 bar / max. 10 bar<br> - electrical connection: approx. 5 kw at 380 v voltage and 50 hz frequency<br> - height of cabin: 2200 mm / with open door: 3250 mm<br> - width/length approx.: 3000 mm<br> - depth of cabin: 1600 mm<br> - with operating instructions and documentation<br> - the machine has to be picked up on 13th or 14th of may 2019 DIMENSIONS (L X W X H) APPROX.: 7300 X 2900 X 300 MM
DESCRIPTION: - MACHINE NO.: 11202
- AIR CONSUMPTION AT 2 BAR AND AIR NOZZLE DIAMETER 7 MM: 1300 L/MIN
- AIR CONSUMPTION AT 6 BAR AND NOZZLE DIAMETER 7 MM: 3300 L/MIN
- NOZZLES BORKARBID: 13 MM
- COMPRESSED AIR CONNECTION: 6 BAR / MAX. 10 BAR
- ELECTRICAL CONNECTION: APPROX. 5 KW AT 380 V VOLTAGE AND 50 HZ FREQUENCY
- HEIGHT OF CABIN: 2200 MM / WITH OPEN DOOR: 3250 MM
- WIDTH/LENGTH APPROX.: 3000 MM
- DEPTH OF CABIN: 1600 MM
- WITH OPERATING INSTRUCTIONS AND DOCUMENTATION
- THE MACHINE HAS TO BE PICKED UP ON 13TH OR 14TH OF MAY 2019
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 3.500 €
Ubicación: Land-wagner dpm
cnc universal milling machine

year of construction: 1997
control: proto trak a.g.e. 3 - version 2
machine id: 8341
table size: 1370 x 355 mm
traverse paths: x - 745 mm / y - 500 mm / z - 500 mm
speed range: 70-3600 rpm
tool holder: sk 40
total power consumption: 3.7 kw / 400 v
machine weight: approx. 2500 kg

facilities:
approx. 15 toolholders
swivelling vertical milling head
automatic tool clamping
handwheel for manual editing
coolant system
machine lighting
documentation

the machine can be visited by appointment

delivery ex location d 87477 main sulzmann mountain / free loading truck
delivery immediate / intermediate sales reserved WAGNER DPM CNC UNIVERSAL MILLING MACHINE YEAR OF CONSTRUCTION: 1997 CONTROL: PROTO TRAK A.G.E. 3 - VERSION 2 MACHINE ID: 8341 TABLE SIZE: 1370 X 355 MM TRAVERSE PATHS: X - 745 MM / Y - 500 MM / Z - 500 MM SPEED RANGE: 70-3600 RPM TOOL HOLDER: SK 40 TOTAL POWER CONSUMPTION: 3.7 KW / 400 V MACHINE WEIGHT: APPROX. 2500 KG FACILITIES: APPROX. 15 TOOLHOLDERS SWIVELLING VERTICAL MILLING HEAD AUTOMATIC TOOL CLAMPING HANDWHEEL FOR MANUAL EDITING COOLANT SYSTEM MACHINE LIGHTING DOCUMENTATION THE MACHINE CAN BE VISITED BY APPOINTMENT DELIVERY EX LOCATION D 87477 MAIN SULZMANN MOUNTAIN / FREE LOADING TRUCK DELIVERY IMMEDIATE / INTERMEDIATE SALES RESERVED
Vendedor: KISTNER GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-weight approx.: 10000 kg<br/>dimensions (l x w x h) approx.: 2800 x 2800 x 180 mm<br/>description: diameter: 2800 mm  width: 180 mm  with t-slots only 1 piece is for sale. the photo shows one of the available magnets. there can be no assurance that the pictured here will be delivered. all magnets are technically and optically absolutely equivalent! WEIGHT APPROX.: 10000 KG
DIMENSIONS (L X W X H) APPROX.: 2800 X 2800 X 180 MM
DESCRIPTION: DIAMETER: 2800 MM WIDTH: 180 MM WITH T-SLOTS ONLY 1 PIECE IS FOR SALE. THE PHOTO SHOWS ONE OF THE AVAILABLE MAGNETS. THERE CAN BE NO ASSURANCE THAT THE PICTURED HERE WILL BE DELIVERED. ALL MAGNETS ARE TECHNICALLY AND OPTICALLY ABSOLUTELY EQUIVALENT!
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 3.700 €
Ubicación: Land-rigid thrower tf1200 by hoffmann

thank you, that you are interested in our offers. if you have specific questions, please use the telephone, personal interview questions can clarify faster than by mail.

pole-reversible drive motor 6.5 / 8kw automatic motor brake
r/l barrel
height adjustment by handwheel
speeds 3000, 4000, 5000, 6000, 8000 and 10000 rpm
spindle diameter 30 mm
extension table right and pull-out workpiece support
wood stop baking
3-roll feed holzher 1117 with 8 speeds, r/l barrel
feed socket
dust nozzle 100 + 120 mm
patched some paint surfaces

dimensions 1950 x 1050 x 1600 mm (lxwxh). weight approx. 1200kg.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". RIGID THROWER TF1200 BY HOFFMANN THANK YOU, THAT YOU ARE INTERESTED IN OUR OFFERS. IF YOU HAVE SPECIFIC QUESTIONS, PLEASE USE THE TELEPHONE, PERSONAL INTERVIEW QUESTIONS CAN CLARIFY FASTER THAN BY MAIL. POLE-REVERSIBLE DRIVE MOTOR 6.5 / 8KW AUTOMATIC MOTOR BRAKE R/L BARREL HEIGHT ADJUSTMENT BY HANDWHEEL SPEEDS 3000, 4000, 5000, 6000, 8000 AND 10000 RPM SPINDLE DIAMETER 30 MM EXTENSION TABLE RIGHT AND PULL-OUT WORKPIECE SUPPORT WOOD STOP BAKING 3-ROLL FEED HOLZHER 1117 WITH 8 SPEEDS, R/L BARREL FEED SOCKET DUST NOZZLE 100 + 120 MM PATCHED SOME PAINT SURFACES DIMENSIONS 1950 X 1050 X 1600 MM (LXWXH). WEIGHT APPROX. 1200KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Ubicación: Land-technical data sorting line<br/>manufacturer  ludden & mennekes entsorgungs-systeme gmbh<br/>typ paper/cardbord sorting line<br/>year of construction 2002<br/>throughput capacity 3 up to 6 tons/hour<br/><br/>pos. 01 feed chain belt conveyor, underfloor<br/>manufacturer ludden & mennekes<br/>type kgf 1400  <br/>feeding belt approx. 5,000 mm<br/>ascending conveyor approx. 13,500 mm<br/>belt width 1,400 mm<br/>effective width 1,330 mm<br/>side wall height 800 mm<br/>gradient 30° <br/>pit dimensions 11,950 x 2,100 x 1,500 mm (l x w x d)<br/><br/>pos. 03 dosing reel, <br/>mounting above the ascending conveyor pos. 02<br/>counter-rotating dosing reel including support and sidewall increase<br/>pipe diameter 700 mm<br/>drivers 150 x 15 mm<br/>drive power 4 kw<br/><br/>pos. 04 disc sieve coarse, <br/>material flow from infeed belt pos. 01 to discharge belt oversized grain pos. 05<br/>15 axles with elliptical plastic discs in various sizes<br/>sieve length 4,877 mm<br/>wire width 1,360 mm<br/>side panel height 750 mm<br/>sieving capacity 7 to 10 t/hour<br/>drive power 4 kw<br/>speed 67 rpm, infinitely variable by frequency converter<br/>gradient 16°<br/><br/>pos. 05 sliding belt conveyor, discharge belt oversized grain (cardboard) from disc screen pos. 04 on stockpile<br/>manufacturer ludden & mennekes<br/>type ggf 1400  <br/>centre distance 4,500 mm<br/>overall width 1,514 mm<br/>belt width 1,400 mm<br/>effective width 1,330 mm<br/>side wall height 500 mm<br/>gradient 0°<br/><br/>pos. 06 sliding belt conveyor ascending belt from disc screen pos. 04 to disc screen fine pos. 08<br/>manufacturer ludden & mennekes<br/>type ggf 1400  <br/>centre distance 9,700 mm<br/>overall width 1,514 mm<br/>belt width 1,400 mm<br/>effective width 1,330 mm<br/>gradient 20°<br/><br/>pos. 08 disc sieve fine <br/>12 axles with elliptical plastic discs in various sizes<br/>gradient 16°<br/><br/>pos. 09 discharge belt undersize grain (paper), sliding belt conveyor from disc screen pos. 08 on stockpile<br/>manufacturer ludden & mennekes<br/>type ggf 1400  <br/>centre distance 4.500 mm<br/>width 1.330 mm<br/>effective width 1,200 mm<br/><br/>pos. 10 sorting belt from discharge belt pos. 09<br/>manufacturer avermann <br/>type ggf 1400  <br/>centre distance 16,350 mm<br/>effective width 1,200 mm<br/>conveying speed 6 - 24 m/min.<br/>distance between idler rollers 500 mm<br/><br/>pos. 11 belt overflow from sorting belt<br/>manufacturer avermann <br/>type ggf 1000  <br/>centre distance 4.000 mm<br/>effective width 1.000 mm<br/>conveying speed 24 m/min.<br/><br/>comments:<br/>the plant is currently still built, but is no longer in operation. an inspection is possible by appointment. <br/><br/>dismantling and loading is the responsibility of the buyer. we will not assume liability for the given technical data and possible errors. TECHNICAL DATA SORTING LINE
MANUFACTURER LUDDEN & MENNEKES ENTSORGUNGS-SYSTEME GMBH
TYP PAPER/CARDBORD SORTING LINE
YEAR OF CONSTRUCTION 2002
THROUGHPUT CAPACITY 3 UP TO 6 TONS/HOUR

POS. 01 FEED CHAIN BELT CONVEYOR, UNDERFLOOR
MANUFACTURER LUDDEN & MENNEKES
TYPE KGF 1400
FEEDING BELT APPROX. 5,000 MM
ASCENDING CONVEYOR APPROX. 13,500 MM
BELT WIDTH 1,400 MM
EFFECTIVE WIDTH 1,330 MM
SIDE WALL HEIGHT 800 MM
GRADIENT 30°
PIT DIMENSIONS 11,950 X 2,100 X 1,500 MM (L X W X D)

POS. 03 DOSING REEL,
MOUNTING ABOVE THE ASCENDING CONVEYOR POS. 02
COUNTER-ROTATING DOSING REEL INCLUDING SUPPORT AND SIDEWALL INCREASE
PIPE DIAMETER 700 MM
DRIVERS 150 X 15 MM
DRIVE POWER 4 KW

POS. 04 DISC SIEVE COARSE,
MATERIAL FLOW FROM INFEED BELT POS. 01 TO DISCHARGE BELT OVERSIZED GRAIN POS. 05
15 AXLES WITH ELLIPTICAL PLASTIC DISCS IN VARIOUS SIZES
SIEVE LENGTH 4,877 MM
WIRE WIDTH 1,360 MM
SIDE PANEL HEIGHT 750 MM
SIEVING CAPACITY 7 TO 10 T/HOUR
DRIVE POWER 4 KW
SPEED 67 RPM, INFINITELY VARIABLE BY FREQUENCY CONVERTER
GRADIENT 16°

POS. 05 SLIDING BELT CONVEYOR, DISCHARGE BELT OVERSIZED GRAIN (CARDBOARD) FROM DISC SCREEN POS. 04 ON STOCKPILE
MANUFACTURER LUDDEN & MENNEKES
TYPE GGF 1400
CENTRE DISTANCE 4,500 MM
OVERALL WIDTH 1,514 MM
BELT WIDTH 1,400 MM
EFFECTIVE WIDTH 1,330 MM
SIDE WALL HEIGHT 500 MM
GRADIENT 0°

POS. 06 SLIDING BELT CONVEYOR ASCENDING BELT FROM DISC SCREEN POS. 04 TO DISC SCREEN FINE POS. 08
MANUFACTURER LUDDEN & MENNEKES
TYPE GGF 1400
CENTRE DISTANCE 9,700 MM
OVERALL WIDTH 1,514 MM
BELT WIDTH 1,400 MM
EFFECTIVE WIDTH 1,330 MM
GRADIENT 20°

POS. 08 DISC SIEVE FINE
12 AXLES WITH ELLIPTICAL PLASTIC DISCS IN VARIOUS SIZES
GRADIENT 16°

POS. 09 DISCHARGE BELT UNDERSIZE GRAIN (PAPER), SLIDING BELT CONVEYOR FROM DISC SCREEN POS. 08 ON STOCKPILE
MANUFACTURER LUDDEN & MENNEKES
TYPE GGF 1400
CENTRE DISTANCE 4.500 MM
WIDTH 1.330 MM
EFFECTIVE WIDTH 1,200 MM

POS. 10 SORTING BELT FROM DISCHARGE BELT POS. 09
MANUFACTURER AVERMANN
TYPE GGF 1400
CENTRE DISTANCE 16,350 MM
EFFECTIVE WIDTH 1,200 MM
CONVEYING SPEED 6 - 24 M/MIN.
DISTANCE BETWEEN IDLER ROLLERS 500 MM

POS. 11 BELT OVERFLOW FROM SORTING BELT
MANUFACTURER AVERMANN
TYPE GGF 1000
CENTRE DISTANCE 4.000 MM
EFFECTIVE WIDTH 1.000 MM
CONVEYING SPEED 24 M/MIN.

COMMENTS:
THE PLANT IS CURRENTLY STILL BUILT, BUT IS NO LONGER IN OPERATION. AN INSPECTION IS POSSIBLE BY APPOINTMENT.

DISMANTLING AND LOADING IS THE RESPONSIBILITY OF THE BUYER. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 27.500 €
Ubicación: Land-kunzmann model ba 600
5 axis machining center only 4500 hours of spindle (almost only the alu edited)
5.-nc axis rotary table mager rotamatic 120
control heidenhain tnc 426
cycle 19
sk 40
traverse paths: x/y/z: 600 x 400 x 600 mm
table size: 750 x 450 mm
wekkzeugspannung: hydraulic
retransmits: 9.000 rpm
tool changer: 24 x drum changer tool holder: sk 40
electronic workpiece button
internal coolant coolant device / internal coolant supply
handwheel hr 410
spindle chiller
condition: good, still under power.

changes and errors in the technical data and information and subject to prior sale! *. KUNZMANN MODEL BA 600 5 AXIS MACHINING CENTER ONLY 4500 HOURS OF SPINDLE (ALMOST ONLY THE ALU EDITED) 5.-NC AXIS ROTARY TABLE MAGER ROTAMATIC 120 CONTROL HEIDENHAIN TNC 426 CYCLE 19 SK 40 TRAVERSE PATHS: X/Y/Z: 600 X 400 X 600 MM TABLE SIZE: 750 X 450 MM WEKKZEUGSPANNUNG: HYDRAULIC RETRANSMITS: 9.000 RPM TOOL CHANGER: 24 X DRUM CHANGER TOOL HOLDER: SK 40 ELECTRONIC WORKPIECE BUTTON INTERNAL COOLANT COOLANT DEVICE / INTERNAL COOLANT SUPPLY HANDWHEEL HR 410 SPINDLE CHILLER CONDITION: GOOD, STILL UNDER POWER. CHANGES AND ERRORS IN THE TECHNICAL DATA AND INFORMATION AND SUBJECT TO PRIOR SALE! *.
Vendedor: EN-Tec GmbH
Año de construcción: usado
Ubicación: Land-turning diameter:450 mm<br/>turning length:1500 mm<br/>control:fanuc oi tf <br/>max. swing over slide:260 mm<br/>bed width:300 mm<br/>spindle taper:a2-6 <br/>spindle speeds:0-3000 1/min.<br/>spindle bore:65 mm<br/>transmission ratio:1 <br/>tailstock quill diameter:68 mm<br/>tailstock quill stroke:200 mm<br/>taper of tailstock quill:4 mk<br/>max. length of work piece:1000 mm<br/>rapid traverse x/z:12/15 m/min<br/>power requirement:9 kw<br/>weight of the machine ca.:1400 kg<br/>dimensions of the machine ca.:3300x1215x1750 mm<br/>automatic tool changer:8-fach, vdi 40 <br/>cnc controller:fanuc oi tf + mannual guide <br/>c-axis: <br/>hydr. tailstock quill movement: <br/>3-jaw hydraulic chuck:210 mm<br/>chip conveyor: <br/>coolant system: <br/>european electric: <br/>automatic lubrication system: <br/>electric handwheel: <br/>servo spindle motor: <br/>machine semi-cover: <br/>: <br/>chip pan: <br/>: <br/>tools:1 satz <br/>dead center: <br/>signal lamp: <br/>levellig elements: <br/>hydraulic unit: <br/>working area light: <br/><br/>new cnc lathe kraft st 225/1000 with fanuc 0i mate td  made in europe  for more information please see the attached documents TURNING DIAMETER:450 MM
TURNING LENGTH:1500 MM
CONTROL:FANUC OI TF
MAX. SWING OVER SLIDE:260 MM
BED WIDTH:300 MM
SPINDLE TAPER:A2-6
SPINDLE SPEEDS:0-3000 1/MIN.
SPINDLE BORE:65 MM
TRANSMISSION RATIO:1
TAILSTOCK QUILL DIAMETER:68 MM
TAILSTOCK QUILL STROKE:200 MM
TAPER OF TAILSTOCK QUILL:4 MK
MAX. LENGTH OF WORK PIECE:1000 MM
RAPID TRAVERSE X/Z:12/15 M/MIN
POWER REQUIREMENT:9 KW
WEIGHT OF THE MACHINE CA.:1400 KG
DIMENSIONS OF THE MACHINE CA.:3300X1215X1750 MM
AUTOMATIC TOOL CHANGER:8-FACH, VDI 40
CNC CONTROLLER:FANUC OI TF + MANNUAL GUIDE
C-AXIS:
HYDR. TAILSTOCK QUILL MOVEMENT:
3-JAW HYDRAULIC CHUCK:210 MM
CHIP CONVEYOR:
COOLANT SYSTEM:
EUROPEAN ELECTRIC:
AUTOMATIC LUBRICATION SYSTEM:
ELECTRIC HANDWHEEL:
SERVO SPINDLE MOTOR:
MACHINE SEMI-COVER:
:
CHIP PAN:
:
TOOLS:1 SATZ
DEAD CENTER:
SIGNAL LAMP:
LEVELLIG ELEMENTS:
HYDRAULIC UNIT:
WORKING AREA LIGHT:

NEW CNC LATHE KRAFT ST 225/1000 WITH FANUC 0I MATE TD MADE IN EUROPE FOR MORE INFORMATION PLEASE SEE THE ATTACHED DOCUMENTS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-control: heidenhain tnc 310
traverse path x/y/z 500/ 250 / 160 mm
travel w 480 mm
size (l x w) 885 x 320 mm
maximum table load 250 kg
distance from table - spindle nose 0-605 mm
speed x/y 1-2000 mm / min
feed speed z 1-1200 mm / min
tool - quick change system sf 32
rpm infinitely 9200 rpm
5 kw
dimensions (w x d x h) 1850 x 2550 x 2400 mm
 CONTROL: HEIDENHAIN TNC 310 TRAVERSE PATH X/Y/Z 500/ 250 / 160 MM TRAVEL W 480 MM SIZE (L X W) 885 X 320 MM MAXIMUM TABLE LOAD 250 KG DISTANCE FROM TABLE - SPINDLE NOSE 0-605 MM SPEED X/Y 1-2000 MM / MIN FEED SPEED Z 1-1200 MM / MIN TOOL - QUICK CHANGE SYSTEM SF 32 RPM INFINITELY 9200 RPM 5 KW DIMENSIONS (W X D X H) 1850 X 2550 X 2400 MM
Vendedor: Catalano Werkzeugmaschinen AG
Año de construcción: usado
Precio: used machinery auction RESALE 7.500 €
Ubicación: Land-horstmann sieve drum, diameter drum: 2450 mm, length drum: 9000 mm, sieve holes: 140 mm x 120 mm, total dimensions: 15000 mm x 3000 mm x 3500 mm. HORSTMANN SIEVE DRUM, DIAMETER DRUM: 2450 MM, LENGTH DRUM: 9000 MM, SIEVE HOLES: 140 MM X 120 MM, TOTAL DIMENSIONS: 15000 MM X 3000 MM X 3500 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-control: heidenhain tnc 320
traverse path x/y/z 500/ 250 / 160 mm
travel w 480 mm
size (l x w) 885 x 320 mm
maximum table load 250 kg
distance from table - spindle nose 0-605 mm
speed x/y 1-2000 mm / min
feed speed z 1-1200 mm / min
tool - quick change system sf 32
rpm infinitely 9200 rpm
5 kw
dimensions (w x d x h) 1850 x 2550 x 2400 mm
 CONTROL: HEIDENHAIN TNC 320 TRAVERSE PATH X/Y/Z 500/ 250 / 160 MM TRAVEL W 480 MM SIZE (L X W) 885 X 320 MM MAXIMUM TABLE LOAD 250 KG DISTANCE FROM TABLE - SPINDLE NOSE 0-605 MM SPEED X/Y 1-2000 MM / MIN FEED SPEED Z 1-1200 MM / MIN TOOL - QUICK CHANGE SYSTEM SF 32 RPM INFINITELY 9200 RPM 5 KW DIMENSIONS (W X D X H) 1850 X 2550 X 2400 MM
Vendedor: Catalano Werkzeugmaschinen AG
Año de construcción: usado
Precio: used machinery auction RESALE 7.500 €
Ubicación: Land-horstmann sieve drum, machine number: 402023, year of construction: 2002, diameter drum: 2450 mm, length drum: 6000 mm, sieve holes: 220 mm x 220 mm, total dimensions: 11000 mm x 3000 mm x 3500 mm. HORSTMANN SIEVE DRUM, MACHINE NUMBER: 402023, YEAR OF CONSTRUCTION: 2002, DIAMETER DRUM: 2450 MM, LENGTH DRUM: 6000 MM, SIEVE HOLES: 220 MM X 220 MM, TOTAL DIMENSIONS: 11000 MM X 3000 MM X 3500 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Precio: 1.800 €
Ubicación: Land-the device is used to erode broken drills and taps up to about m 20 directly on the drill steel.
thereby, a copper - hollow electrode in the head is clamped.
the hollow electrode has a smaller diameter than the broken tool. in the edm, the core piece of the broken tool is broken down. the cutting loose and can be removed easily. because the electrode comes with the core of the hole not in touch, the thread remains intact. the usual operating drilling emulsion is used as a coolant
power 3.6 kva          
  THE DEVICE IS USED TO ERODE BROKEN DRILLS AND TAPS UP TO ABOUT M 20 DIRECTLY ON THE DRILL STEEL. THEREBY, A COPPER - HOLLOW ELECTRODE IN THE HEAD IS CLAMPED. THE HOLLOW ELECTRODE HAS A SMALLER DIAMETER THAN THE BROKEN TOOL. IN THE EDM, THE CORE PIECE OF THE BROKEN TOOL IS BROKEN DOWN. THE CUTTING LOOSE AND CAN BE REMOVED EASILY. BECAUSE THE ELECTRODE COMES WITH THE CORE OF THE HOLE NOT IN TOUCH, THE THREAD REMAINS INTACT. THE USUAL OPERATING DRILLING EMULSION IS USED AS A COOLANT POWER 3.6 KVA
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-max. wheel diameter:800 mm<br/>gear width:540 mm<br/>max. module:12 <br/>max. radial travel (x-axis):540 mm<br/>max. tangential travel (y-axis):200 mm<br/>max. axial travel (z-axis):600 mm<br/>max. travel counter support (z4-axis):630 mm<br/>milling head swivelling angle (a-axis):+/-45° <br/>workpiece table outer diameter:380 mm<br/>bore diameter x depth:80 x 300 mm<br/>max. table load:8 kn<br/>table speed max. :0-32 min-1<br/>grinding spindle drive:15 kw<br/>max. module:12 <br/>max. speed:6.000 min-1<br/>possible grinding arbor diameter:10, 20, 80 mm<br/>profile grinding wheel diameter 80, max. size:350 x 50 x 80 mm<br/>profile grinding wheel diameter 10, max size:100 x 16 x 10 mm<br/>feed and rapid traverse: <br/>axis x:10 m/min<br/>axis y:5 m/min<br/>axis z:10 m/min<br/>weight of the machine ca.:10,5 t<br/>dimensions of the machine ca.:6,5 x 6,9 m<br/>total conneted load :70 kva<br/>voltage:400 v<br/>operating frequency:50 hz<br/>control voltage:24 v dc <br/>cable cross section:35 mm2<br/>fuse protection :100 a<br/><br/>equipment ? full enclosure incl. extraction with electrostatic filter ? coolant equipment manuf. hofmann prepared for external cold- water-cooling-device ? dressing device with one dressing wheel max. Ø 150mm ? counterholder extented to 1100 mm between table and centre ? measuring probe in the working area ? 1 piece grinding wheel arbor Ø 20 and Ø 10 mm incl. grinding wheel flange MAX. WHEEL DIAMETER:800 MM
GEAR WIDTH:540 MM
MAX. MODULE:12
MAX. RADIAL TRAVEL (X-AXIS):540 MM
MAX. TANGENTIAL TRAVEL (Y-AXIS):200 MM
MAX. AXIAL TRAVEL (Z-AXIS):600 MM
MAX. TRAVEL COUNTER SUPPORT (Z4-AXIS):630 MM
MILLING HEAD SWIVELLING ANGLE (A-AXIS):+/-45°
WORKPIECE TABLE OUTER DIAMETER:380 MM
BORE DIAMETER X DEPTH:80 X 300 MM
MAX. TABLE LOAD:8 KN
TABLE SPEED MAX. :0-32 MIN-1
GRINDING SPINDLE DRIVE:15 KW
MAX. MODULE:12
MAX. SPEED:6.000 MIN-1
POSSIBLE GRINDING ARBOR DIAMETER:10, 20, 80 MM
PROFILE GRINDING WHEEL DIAMETER 80, MAX. SIZE:350 X 50 X 80 MM
PROFILE GRINDING WHEEL DIAMETER 10, MAX SIZE:100 X 16 X 10 MM
FEED AND RAPID TRAVERSE:
AXIS X:10 M/MIN
AXIS Y:5 M/MIN
AXIS Z:10 M/MIN
WEIGHT OF THE MACHINE CA.:10,5 T
DIMENSIONS OF THE MACHINE CA.:6,5 X 6,9 M
TOTAL CONNETED LOAD :70 KVA
VOLTAGE:400 V
OPERATING FREQUENCY:50 HZ
CONTROL VOLTAGE:24 V DC
CABLE CROSS SECTION:35 MM2
FUSE PROTECTION :100 A

EQUIPMENT ? FULL ENCLOSURE INCL. EXTRACTION WITH ELECTROSTATIC FILTER ? COOLANT EQUIPMENT MANUF. HOFMANN PREPARED FOR EXTERNAL COLD- WATER-COOLING-DEVICE ? DRESSING DEVICE WITH ONE DRESSING WHEEL MAX. Ø 150MM ? COUNTERHOLDER EXTENTED TO 1100 MM BETWEEN TABLE AND CENTRE ? MEASURING PROBE IN THE WORKING AREA ? 1 PIECE GRINDING WHEEL ARBOR Ø 20 AND Ø 10 MM INCL. GRINDING WHEEL FLANGE
Vendedor: FLECKENSTEIN Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land--in stock
-after reviewing the technical
-year of construction 2009

-with two floating pilami automatically

technical parameters:

-crawler width 340 mm (spikes)
-cutting width 310 mm

cutting height/pivot saws:
-no trzewik dociskaj?cego 135 mm
-with shoes 100 mm

the height of the cutting/multiblade:
-no trzewik dociskaj?cego 135 mm
-with shoes 115 mm

-the length of the workpiece min 480 mm
-clearance width 800 mm max.
-the width of the ground clearance on the right side of the pi?y150 mm

-main engine 55 kw
-feed motor 3 kw
-8-80 feed speed m/min

– saw blade diameter min/max 250/380 mm
– internal hole diameter saw blade 80 mm
-spindle speed 3900 u/min

-spindle diameter 65 mm
-the height of the saw blade spindle set electronically

-fixed sleeve extended
-2 sleeves moving each one saw
-additional front (multiblade)

-positioning system for smooth adjustment of 2 movable saws
-system control proficut 2. to control the two bushes saw
sps control; 100 software on each pivottable view,

-touch control panel ripassist for proficut 1/2
-cutting width optimization program supports joystick and touch panel
-laser-line 1 and 2 removable, adjustable, synchronized with the realignment of saws

machine size:

-the length of the 2200mm
-width: 1900 mm
-height 2000 mm

weight approx. 3400 kg

-input system podawczo-reception raimech e5
-belt conveyor:

-motor 0.75 kw
-conveyor length/width 2800 mm/600 mm
-belt speed in sync with the feed rate of the saw

-electricity 400 v/50 hz

raimech and 6

-system-transverse conveyor with sorting and return
-system, transverse conveyor rbaql + r length 5000 mm, width 2100 mm, 30 m/min, 8 x chains
– max. length 5200 mm

transverse transport items ready for the right and left:
-sorting tape sfb (x 2) length 1000 mm
-w. 1800 mm, max. length 2200 mm

– motor 0.25 kw, 5 m/min
-set on the right next to the cross conveyor to pickup that has been cut strips

-return tape rfb (x 2)
– motor 0.37 kw, 30 m/min,

dimensions:

-the length of 1000 mm,
-width. 600 mm

-set on the left side of the cross conveyor, transporter return leftovers
-electricity 400 v/50 hz

-we reserve the possibility of mistakes-technical changes in

-IN STOCK -AFTER REVIEWING THE TECHNICAL -YEAR OF CONSTRUCTION 2009 -WITH TWO FLOATING PILAMI AUTOMATICALLY TECHNICAL PARAMETERS: -CRAWLER WIDTH 340 MM (SPIKES) -CUTTING WIDTH 310 MM CUTTING HEIGHT/PIVOT SAWS: -NO TRZEWIK DOCISKAJ?CEGO 135 MM -WITH SHOES 100 MM THE HEIGHT OF THE CUTTING/MULTIBLADE: -NO TRZEWIK DOCISKAJ?CEGO 135 MM -WITH SHOES 115 MM -THE LENGTH OF THE WORKPIECE MIN 480 MM -CLEARANCE WIDTH 800 MM MAX. -THE WIDTH OF THE GROUND CLEARANCE ON THE RIGHT SIDE OF THE PI?Y150 MM -MAIN ENGINE 55 KW -FEED MOTOR 3 KW -8-80 FEED SPEED M/MIN – SAW BLADE DIAMETER MIN/MAX 250/380 MM – INTERNAL HOLE DIAMETER SAW BLADE 80 MM -SPINDLE SPEED 3900 U/MIN -SPINDLE DIAMETER 65 MM -THE HEIGHT OF THE SAW BLADE SPINDLE SET ELECTRONICALLY -FIXED SLEEVE EXTENDED -2 SLEEVES MOVING EACH ONE SAW -ADDITIONAL FRONT (MULTIBLADE) -POSITIONING SYSTEM FOR SMOOTH ADJUSTMENT OF 2 MOVABLE SAWS -SYSTEM CONTROL PROFICUT 2. TO CONTROL THE TWO BUSHES SAW SPS CONTROL; 100 SOFTWARE ON EACH PIVOTTABLE VIEW, -TOUCH CONTROL PANEL RIPASSIST FOR PROFICUT 1/2 -CUTTING WIDTH OPTIMIZATION PROGRAM SUPPORTS JOYSTICK AND TOUCH PANEL -LASER-LINE 1 AND 2 REMOVABLE, ADJUSTABLE, SYNCHRONIZED WITH THE REALIGNMENT OF SAWS MACHINE SIZE: -THE LENGTH OF THE 2200MM -WIDTH: 1900 MM -HEIGHT 2000 MM WEIGHT APPROX. 3400 KG -INPUT SYSTEM PODAWCZO-RECEPTION RAIMECH E5 -BELT CONVEYOR: -MOTOR 0.75 KW -CONVEYOR LENGTH/WIDTH 2800 MM/600 MM -BELT SPEED IN SYNC WITH THE FEED RATE OF THE SAW -ELECTRICITY 400 V/50 HZ RAIMECH AND 6 -SYSTEM-TRANSVERSE CONVEYOR WITH SORTING AND RETURN -SYSTEM, TRANSVERSE CONVEYOR RBAQL + R LENGTH 5000 MM, WIDTH 2100 MM, 30 M/MIN, 8 X CHAINS – MAX. LENGTH 5200 MM TRANSVERSE TRANSPORT ITEMS READY FOR THE RIGHT AND LEFT: -SORTING TAPE SFB (X 2) LENGTH 1000 MM -W. 1800 MM, MAX. LENGTH 2200 MM – MOTOR 0.25 KW, 5 M/MIN -SET ON THE RIGHT NEXT TO THE CROSS CONVEYOR TO PICKUP THAT HAS BEEN CUT STRIPS -RETURN TAPE RFB (X 2) – MOTOR 0.37 KW, 30 M/MIN, DIMENSIONS: -THE LENGTH OF 1000 MM, -WIDTH. 600 MM -SET ON THE LEFT SIDE OF THE CROSS CONVEYOR, TRANSPORTER RETURN LEFTOVERS -ELECTRICITY 400 V/50 HZ -WE RESERVE THE POSSIBILITY OF MISTAKES-TECHNICAL CHANGES IN
Vendedor: StanDrew
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 600 x 800 x 1700 mm<br/>description: ram stroke approx. 430 mm, depth ram center to machine approx. 200 mm, plate diameter approx. 185 mm, including base table approx. 570 x 570 mm, working height approx. 950 mm WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 800 X 1700 MM
DESCRIPTION: RAM STROKE APPROX. 430 MM, DEPTH RAM CENTER TO MACHINE APPROX. 200 MM, PLATE DIAMETER APPROX. 185 MM, INCLUDING BASE TABLE APPROX. 570 X 570 MM, WORKING HEIGHT APPROX. 950 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-very good condition
-year of production 1992

technical parameters:

-crawler width 550 mm
-shaft width 650 mm
-maximum cutting height 160 mm
-disc diameters from 250 mm to 450 mm
-spindle diameter 60 mm
-barrel diameter 80 mm
-the minimum length of item 69 cm

-main engine 110 kw
-the engine feed track 3 kw
-the engine feed rollers 2 x 1.5 kw
-feed smoothly adjustable 0 to 40 m/min
-adjustable feed on the inverter

-central lubrication track
-automatic height adjustment spindle
-automatic height adjustment of the rollers
-upper shafts extending
– the spindle has support

-pressure pneumatic rollers
-steering panel
-central lubrication track
-four rolls stretching the upper
is an independent pressure roller at the output

overall dimensions of the machine:

-length: 330 cm
-width: 225 cm
-height 220 cm

-weight 7000 kg

upgradeable machines:

-extraction of sawdust-different types of
-hoses-various diameters
-turbine-different powers
-disc-saws (globus or faba) -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION -YEAR OF PRODUCTION 1992 TECHNICAL PARAMETERS: -CRAWLER WIDTH 550 MM -SHAFT WIDTH 650 MM -MAXIMUM CUTTING HEIGHT 160 MM -DISC DIAMETERS FROM 250 MM TO 450 MM -SPINDLE DIAMETER 60 MM -BARREL DIAMETER 80 MM -THE MINIMUM LENGTH OF ITEM 69 CM -MAIN ENGINE 110 KW -THE ENGINE FEED TRACK 3 KW -THE ENGINE FEED ROLLERS 2 X 1.5 KW -FEED SMOOTHLY ADJUSTABLE 0 TO 40 M/MIN -ADJUSTABLE FEED ON THE INVERTER -CENTRAL LUBRICATION TRACK -AUTOMATIC HEIGHT ADJUSTMENT SPINDLE -AUTOMATIC HEIGHT ADJUSTMENT OF THE ROLLERS -UPPER SHAFTS EXTENDING – THE SPINDLE HAS SUPPORT -PRESSURE PNEUMATIC ROLLERS -STEERING PANEL -CENTRAL LUBRICATION TRACK -FOUR ROLLS STRETCHING THE UPPER IS AN INDEPENDENT PRESSURE ROLLER AT THE OUTPUT OVERALL DIMENSIONS OF THE MACHINE: -LENGTH: 330 CM -WIDTH: 225 CM -HEIGHT 220 CM -WEIGHT 7000 KG UPGRADEABLE MACHINES: -EXTRACTION OF SAWDUST-DIFFERENT TYPES OF -HOSES-VARIOUS DIAMETERS -TURBINE-DIFFERENT POWERS -DISC-SAWS (GLOBUS OR FABA)
Vendedor: StanDrew
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 35 kg<br/>dimensions (l x w x h) approx.: 250 x 450 x 850 mm<br/>description: ram stroke approx. 400 mm, ram diameter approx. 50 mm WEIGHT APPROX.: 35 KG
DIMENSIONS (L X W X H) APPROX.: 250 X 450 X 850 MM
DESCRIPTION: RAM STROKE APPROX. 400 MM, RAM DIAMETER APPROX. 50 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-perfect condition

technical parameters:

-maximum cutting height 120 mm
-maximum cutting width 250 mm

-strong main 30 kw
-the motor feed 1.1 kw
-feeding speed from 5 to 24 m/min

maximum disc diameter 350 mm
-front with a diameter of 80 mm
-shaft diameter 60 mm

-the possibility of installing a floating shield

-the minimum material length 500 mm
-working table dimensions 800 mm x 1750 mm

-three rows of latches anti casting
-adjustable feed on the geared motor
-central lubrication
-four top rollers

-feeding tray conveyor with a length of 400 cm and a width of 60 cm with roller press
-sorting machine at the output of 350 cm

overall dimensions of the machine:

-length: 185 cm
width 150 cm
-height 220 cm
the weight of 1850 kg -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -PERFECT CONDITION TECHNICAL PARAMETERS: -MAXIMUM CUTTING HEIGHT 120 MM -MAXIMUM CUTTING WIDTH 250 MM -STRONG MAIN 30 KW -THE MOTOR FEED 1.1 KW -FEEDING SPEED FROM 5 TO 24 M/MIN MAXIMUM DISC DIAMETER 350 MM -FRONT WITH A DIAMETER OF 80 MM -SHAFT DIAMETER 60 MM -THE POSSIBILITY OF INSTALLING A FLOATING SHIELD -THE MINIMUM MATERIAL LENGTH 500 MM -WORKING TABLE DIMENSIONS 800 MM X 1750 MM -THREE ROWS OF LATCHES ANTI CASTING -ADJUSTABLE FEED ON THE GEARED MOTOR -CENTRAL LUBRICATION -FOUR TOP ROLLERS -FEEDING TRAY CONVEYOR WITH A LENGTH OF 400 CM AND A WIDTH OF 60 CM WITH ROLLER PRESS -SORTING MACHINE AT THE OUTPUT OF 350 CM OVERALL DIMENSIONS OF THE MACHINE: -LENGTH: 185 CM WIDTH 150 CM -HEIGHT 220 CM THE WEIGHT OF 1850 KG
Vendedor: StanDrew
Año de construcción: usado
Precio: 16.500 €
Ubicación: Land-cnc plate boring machine, table boring machine, boring mill, milling machine,<br /><br />-geometrically overhauled 2008<br />-control siemens sinumerik 840d<br />-rotatable clamping table 360 °<br />-travel distance 1800 mm<br />-table dimensions 1,400 x 1,300 mm<br />-table load approx. 5,000 kg<br />-solid worktable<br />-table dimensions 3,120 x 1,300 mm<br />-table load approx. kg<br />-winkelfräskopf<br />-driving lanes<br />z 810 mm<br />y 1500 mm<br />x 6000 mm<br />-working spindle 120 mm<br />-pinolenhub 800 mm<br />-recording sk50<br />-revolutions rpm<br />-dimensions machine mm<br />-dimensions control cabinet mm<br />-weight kg CNC PLATE BORING MACHINE, TABLE BORING MACHINE, BORING MILL, MILLING MACHINE,

-GEOMETRICALLY OVERHAULED 2008
-CONTROL SIEMENS SINUMERIK 840D
-ROTATABLE CLAMPING TABLE 360 °
-TRAVEL DISTANCE 1800 MM
-TABLE DIMENSIONS 1,400 X 1,300 MM
-TABLE LOAD APPROX. 5,000 KG
-SOLID WORKTABLE
-TABLE DIMENSIONS 3,120 X 1,300 MM
-TABLE LOAD APPROX. KG
-WINKELFRäSKOPF
-DRIVING LANES
Z 810 MM
Y 1500 MM
X 6000 MM
-WORKING SPINDLE 120 MM
-PINOLENHUB 800 MM
-RECORDING SK50
-REVOLUTIONS RPM
-DIMENSIONS MACHINE MM
-DIMENSIONS CONTROL CABINET MM
-WEIGHT KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical-prepared to work
-a well known reputable brand raimann

-the price of feeders is $62900

technical parameters:

-maximum cutting height 120 mm
-maximum cutting width 250 mm

-strong main 22 kw
-the motor feed 1.1 kw
-adjustable feed speed on the geared motor

-the machine is equipped with a laser

maximum disc diameter 350 mm
-front with a diameter of 80 mm
-shaft diameter 60 mm
-the minimum material length 500 mm
-working table dimensions 800 mm x 1750 mm

-three rows of latches anti casting
-adjustable feed on the geared motor
-central lubrication
-four top rollers

overall dimensions of the machine:

-length: 175 cm
width 150 cm
-height 170 cm

-weight 2000 kg

an additional option is the feeder for the price of 18 000 z? -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL-PREPARED TO WORK -A WELL KNOWN REPUTABLE BRAND RAIMANN -THE PRICE OF FEEDERS IS $62900 TECHNICAL PARAMETERS: -MAXIMUM CUTTING HEIGHT 120 MM -MAXIMUM CUTTING WIDTH 250 MM -STRONG MAIN 22 KW -THE MOTOR FEED 1.1 KW -ADJUSTABLE FEED SPEED ON THE GEARED MOTOR -THE MACHINE IS EQUIPPED WITH A LASER MAXIMUM DISC DIAMETER 350 MM -FRONT WITH A DIAMETER OF 80 MM -SHAFT DIAMETER 60 MM -THE MINIMUM MATERIAL LENGTH 500 MM -WORKING TABLE DIMENSIONS 800 MM X 1750 MM -THREE ROWS OF LATCHES ANTI CASTING -ADJUSTABLE FEED ON THE GEARED MOTOR -CENTRAL LUBRICATION -FOUR TOP ROLLERS OVERALL DIMENSIONS OF THE MACHINE: -LENGTH: 175 CM WIDTH 150 CM -HEIGHT 170 CM -WEIGHT 2000 KG AN ADDITIONAL OPTION IS THE FEEDER FOR THE PRICE OF 18 000 Z?
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-textile machines, steam table, textile steam table roll-out, steaming, shrinking u. fixing mass<br /><br />-working width 2.25 m<br />-spout va / brass<br />-6 x laser for exact drop stitch alignment or limitation of the product width<br />-meter counter<br />-driven goods reception<br />-speed adjustable<br />-plenty of spare parts available at extra cost TEXTILE MACHINES, STEAM TABLE, TEXTILE STEAM TABLE ROLL-OUT, STEAMING, SHRINKING U. FIXING MASS

-WORKING WIDTH 2.25 M
-SPOUT VA / BRASS
-6 X LASER FOR EXACT DROP STITCH ALIGNMENT OR LIMITATION OF THE PRODUCT WIDTH
-METER COUNTER
-DRIVEN GOODS RECEPTION
-SPEED ADJUSTABLE
-PLENTY OF SPARE PARTS AVAILABLE AT EXTRA COST
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-very good condition

technical parameters:

-crawler width 340 mm
-cutting height 200 mm
-blade diameter 350 mm

– motors 2 x 45 kw

-spindle diameter 65 mm
-barrel diameter 80 mm wedge 13 mm

– electric spindle adjustment
-electrical height adjustment
-feed on the inverter

– motors spindle height adjustment 2 x 0.18 kw
-height adjustment engine 0.37 kw
-feed motor 1.5 kw

-three rows of latches
-four top rollers extending
-the two upper support rollers

-caterpillar for wood oblodzonego
-central lubrication
-nozzle dimensions 120 mm x 330 mm and d = 200 mm

overall dimensions of the machine:

-length: 275 cm
-width: 170 cm
-height 240 cm
-weight of ~ 5000 kg

in addition, we offer:

-shields and podcinaki:-faba-freud-globus
-the magnifying glass to the saw
-extraction of sawdust/different types/
-hoses/different diameters/
-laser -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION TECHNICAL PARAMETERS: -CRAWLER WIDTH 340 MM -CUTTING HEIGHT 200 MM -BLADE DIAMETER 350 MM – MOTORS 2 X 45 KW -SPINDLE DIAMETER 65 MM -BARREL DIAMETER 80 MM WEDGE 13 MM – ELECTRIC SPINDLE ADJUSTMENT -ELECTRICAL HEIGHT ADJUSTMENT -FEED ON THE INVERTER – MOTORS SPINDLE HEIGHT ADJUSTMENT 2 X 0.18 KW -HEIGHT ADJUSTMENT ENGINE 0.37 KW -FEED MOTOR 1.5 KW -THREE ROWS OF LATCHES -FOUR TOP ROLLERS EXTENDING -THE TWO UPPER SUPPORT ROLLERS -CATERPILLAR FOR WOOD OBLODZONEGO -CENTRAL LUBRICATION -NOZZLE DIMENSIONS 120 MM X 330 MM AND D = 200 MM OVERALL DIMENSIONS OF THE MACHINE: -LENGTH: 275 CM -WIDTH: 170 CM -HEIGHT 240 CM -WEIGHT OF ~ 5000 KG IN ADDITION, WE OFFER: -SHIELDS AND PODCINAKI:-FABA-FREUD-GLOBUS -THE MAGNIFYING GLASS TO THE SAW -EXTRACTION OF SAWDUST/DIFFERENT TYPES/ -HOSES/DIFFERENT DIAMETERS/ -LASER
Vendedor: StanDrew
Año de construcción: usado
Precio: 1.400 €
Ubicación: Land-: 1,0 mm<br/>: 1.020 mm<br/>: 50 mm<br/>: 1.500 mm<br/>: 770 mm<br/>: 1.270 mm<br/>: 120 kg<br/>asymetric prebended rolls<br/>wire insert grooves<br/>fold slot in the upper roll<br/>subframe<br/><br/><br/><br/>bending capacity: 1,0 mm  <br/>bending length: 1.020 mm <br/>roll diameter: 50 mm <br/>length: 1.500 mm <br/>width: 770 mm <br/>heigth: 1.270 mm<br/>weight: 120 kg<br/><br/><br/><br/> : 1,0 MM
: 1.020 MM
: 50 MM
: 1.500 MM
: 770 MM
: 1.270 MM
: 120 KG
ASYMETRIC PREBENDED ROLLS
WIRE INSERT GROOVES
FOLD SLOT IN THE UPPER ROLL
SUBFRAME



BENDING CAPACITY: 1,0 MM
BENDING LENGTH: 1.020 MM
ROLL DIAMETER: 50 MM
LENGTH: 1.500 MM
WIDTH: 770 MM
HEIGTH: 1.270 MM
WEIGHT: 120 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-very good condition
-year of manufacture 2004

technical parameters:

-crawler width 330 mm
-cutting height 110 mm
-diameter shafts, 65 mm
-barrel diameter 80 mm 2 wedges 8 mm

-4 rows of latches
-laser
– automatic central lubrication
-adjustable feed on the inverter
-feed rate 5-35 m/min

-main motor 22 kw
-the two upper rollers
-max disc diameter 360 mm

overall dimensions of the machine:

-length: 190 cm
width 150 cm
-height 200 cm
-weight ~ 2200 kg -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION -YEAR OF MANUFACTURE 2004 TECHNICAL PARAMETERS: -CRAWLER WIDTH 330 MM -CUTTING HEIGHT 110 MM -DIAMETER SHAFTS, 65 MM -BARREL DIAMETER 80 MM 2 WEDGES 8 MM -4 ROWS OF LATCHES -LASER – AUTOMATIC CENTRAL LUBRICATION -ADJUSTABLE FEED ON THE INVERTER -FEED RATE 5-35 M/MIN -MAIN MOTOR 22 KW -THE TWO UPPER ROLLERS -MAX DISC DIAMETER 360 MM OVERALL DIMENSIONS OF THE MACHINE: -LENGTH: 190 CM WIDTH 150 CM -HEIGHT 200 CM -WEIGHT ~ 2200 KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-spindle diameter: 150 mm<br/>x-travel: 3000 mm<br/>y-travel: 2000 mm<br/>z-travel: 1500 mm<br/>w-axis: 700 mm<br/>spindle taper: iso 50 <br/>control: siemens <br/>type: 850 m mm<br/>table surface area: 2000x1600 mm<br/>table load: 12000 kg<br/>turning speeds: 12-3000 u/min<br/>spindle motor: 30 kw<br/>feed: 0-6 m/min<br/>chip conveyor:  <br/>coolant:  <br/>total power requirement: 60 kw<br/>weight of the machine ca.: 40 t<br/>dimensions of the machine ca.: 8x6,3x5,4 m<br/><br/><br/><br/><br/> SPINDLE DIAMETER: 150 MM
X-TRAVEL: 3000 MM
Y-TRAVEL: 2000 MM
Z-TRAVEL: 1500 MM
W-AXIS: 700 MM
SPINDLE TAPER: ISO 50
CONTROL: SIEMENS
TYPE: 850 M MM
TABLE SURFACE AREA: 2000X1600 MM
TABLE LOAD: 12000 KG
TURNING SPEEDS: 12-3000 U/MIN
SPINDLE MOTOR: 30 KW
FEED: 0-6 M/MIN
CHIP CONVEYOR:
COOLANT:
TOTAL POWER REQUIREMENT: 60 KW
WEIGHT OF THE MACHINE CA.: 40 T
DIMENSIONS OF THE MACHINE CA.: 8X6,3X5,4 M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 400mm, y-travel: 300mm, z-travel: 250mm, max. table load: 1t, clamping surface: 800x300mm, t-groove din/ number of/ width/ distance: 650/ 3/ 18/ 70mm, length: 2200mm, width: 2700mm, height: 2400mm, weight: 2.3t.  X-TRAVEL: 400MM, Y-TRAVEL: 300MM, Z-TRAVEL: 250MM, MAX. TABLE LOAD: 1T, CLAMPING SURFACE: 800X300MM, T-GROOVE DIN/ NUMBER OF/ WIDTH/ DISTANCE: 650/ 3/ 18/ 70MM, LENGTH: 2200MM, WIDTH: 2700MM, HEIGHT: 2400MM, WEIGHT: 2.3T.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 120 €
Ubicación: Land-weight approx.: 50 kg<br/>dimensions (l x w x h) approx.: 570 x 810 x 1000 mm<br/>description: manufacturer number 274 e-363, max. 1000 rpm, permitted loading weight 20 kg, running drum height 250 mm, inner diameter 350 mm, material st 33 WEIGHT APPROX.: 50 KG
DIMENSIONS (L X W X H) APPROX.: 570 X 810 X 1000 MM
DESCRIPTION: MANUFACTURER NUMBER 274 E-363, MAX. 1000 RPM, PERMITTED LOADING WEIGHT 20 KG, RUNNING DRUM HEIGHT 250 MM, INNER DIAMETER 350 MM, MATERIAL ST 33
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-very good condition

technical parameters:

-cutting width 250 mm
-cutting height 100 mm

-main motor 22 kw
-feed motor 2.2 kw

-adjustable feed speed

-max disc diameter 315 mm
-shaft diameter 55 mm wedge 2 × 16
-barrel diameter 70 mm wedge 2 × 20 mm

-the two upper rollers
– automatic central lubrication

-three rows of latches
-diameter 180 mm
-table width 930 mm

overall dimensions of the machine:
-length: 180 cm
width 150 cm
-height 180 cm
-weight ~ 1800 kg -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION TECHNICAL PARAMETERS: -CUTTING WIDTH 250 MM -CUTTING HEIGHT 100 MM -MAIN MOTOR 22 KW -FEED MOTOR 2.2 KW -ADJUSTABLE FEED SPEED -MAX DISC DIAMETER 315 MM -SHAFT DIAMETER 55 MM WEDGE 2 × 16 -BARREL DIAMETER 70 MM WEDGE 2 × 20 MM -THE TWO UPPER ROLLERS – AUTOMATIC CENTRAL LUBRICATION -THREE ROWS OF LATCHES -DIAMETER 180 MM -TABLE WIDTH 930 MM OVERALL DIMENSIONS OF THE MACHINE: -LENGTH: 180 CM WIDTH 150 CM -HEIGHT 180 CM -WEIGHT ~ 1800 KG
Vendedor: StanDrew
Año de construcción: usado
Precio: used machinery auction RESALE 120 €
Ubicación: Land-weight approx.: 50 kg<br/>dimensions (l x w x h) approx.: 570 x 810 x 1000 mm<br/>description: manufacturer number 274 e-232, max. 1000 rpm, permitted loading weight 20 kg, running drum height 250 mm, inner diameter 350 mm, material st 33 WEIGHT APPROX.: 50 KG
DIMENSIONS (L X W X H) APPROX.: 570 X 810 X 1000 MM
DESCRIPTION: MANUFACTURER NUMBER 274 E-232, MAX. 1000 RPM, PERMITTED LOADING WEIGHT 20 KG, RUNNING DRUM HEIGHT 250 MM, INNER DIAMETER 350 MM, MATERIAL ST 33
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-very good condition

technical parameters:

-crawler width 250 mm
-cutting height 120 mm (60 mm with a shield)
-main motor 22 kw

-adjustable feed the wariatorze
-feed motor 1.5 kw
-floating shield
-engine blade spacing 0.55 kw

-movement of the blade on the accelerator pedal

-blade diameter 400 mm
-spindle diameter 65 mm
-barrel diameter 80 mm

-three rows of latches
-caterpillar with
-laser

overall dimensions of the machine:
-length: 190 cm
-width: 165 cm
-height 190 cm
-weight 2200 kg -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION TECHNICAL PARAMETERS: -CRAWLER WIDTH 250 MM -CUTTING HEIGHT 120 MM (60 MM WITH A SHIELD) -MAIN MOTOR 22 KW -ADJUSTABLE FEED THE WARIATORZE -FEED MOTOR 1.5 KW -FLOATING SHIELD -ENGINE BLADE SPACING 0.55 KW -MOVEMENT OF THE BLADE ON THE ACCELERATOR PEDAL -BLADE DIAMETER 400 MM -SPINDLE DIAMETER 65 MM -BARREL DIAMETER 80 MM -THREE ROWS OF LATCHES -CATERPILLAR WITH -LASER OVERALL DIMENSIONS OF THE MACHINE: -LENGTH: 190 CM -WIDTH: 165 CM -HEIGHT 190 CM -WEIGHT 2200 KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-fine sanding machine<br/>working width: 1300 mm.<br/>workpiece thickness: 3 - 140 mm<br/>n° of units: 2<br/>* crossbelt, csd sanding pad, belt sizes 4900 x 150 mm, 13/17 kw motor, 12 and 24 m/s belt speed, belt cleaning <br/>* wide belt, csd sanding pad, belt sizes 2620 x 1350 mm, 13/17 kw motor, 10 and 20 m/s belt speed, belt cleaning, first belt guiding roller with excenter adjustment for light calibration<br/>* fibre brush 150 mm diameter, 1,5 kw<br/>vacuum-feedbelt suction, 7,5 kw fan<br/>feedmotor 3 kw, feedbelt speed 4,5 - 22 m/min<br/>motorised rise and fall of the table<br/>panel tracers with 16 mm centers FINE SANDING MACHINE
WORKING WIDTH: 1300 MM.
WORKPIECE THICKNESS: 3 - 140 MM
N° OF UNITS: 2
* CROSSBELT, CSD SANDING PAD, BELT SIZES 4900 X 150 MM, 13/17 KW MOTOR, 12 AND 24 M/S BELT SPEED, BELT CLEANING
* WIDE BELT, CSD SANDING PAD, BELT SIZES 2620 X 1350 MM, 13/17 KW MOTOR, 10 AND 20 M/S BELT SPEED, BELT CLEANING, FIRST BELT GUIDING ROLLER WITH EXCENTER ADJUSTMENT FOR LIGHT CALIBRATION
* FIBRE BRUSH 150 MM DIAMETER, 1,5 KW
VACUUM-FEEDBELT SUCTION, 7,5 KW FAN
FEEDMOTOR 3 KW, FEEDBELT SPEED 4,5 - 22 M/MIN
MOTORISED RISE AND FALL OF THE TABLE
PANEL TRACERS WITH 16 MM CENTERS
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-very good condition
-year of manufacture 2006

technical parameters:

-crawler width 330 mm
-cutting height 110 mm
-diameter shafts, 65 mm
-barrel diameter 80 mm 2 wedges 8 mm

-spindle quickfix
-4 rows of latches
-laser
– automatic central lubrication
-adjustable feed on the inverter
-feed rate 5-35 m/min

-main motor 22 kw
-the two upper rollers
-max disc diameter 360 mm

overall dimensions of the machine:

-length: 190 cm
width 150 cm
-height 200 cm
-weight ~ 2200 kg -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION -YEAR OF MANUFACTURE 2006 TECHNICAL PARAMETERS: -CRAWLER WIDTH 330 MM -CUTTING HEIGHT 110 MM -DIAMETER SHAFTS, 65 MM -BARREL DIAMETER 80 MM 2 WEDGES 8 MM -SPINDLE QUICKFIX -4 ROWS OF LATCHES -LASER – AUTOMATIC CENTRAL LUBRICATION -ADJUSTABLE FEED ON THE INVERTER -FEED RATE 5-35 M/MIN -MAIN MOTOR 22 KW -THE TWO UPPER ROLLERS -MAX DISC DIAMETER 360 MM OVERALL DIMENSIONS OF THE MACHINE: -LENGTH: 190 CM WIDTH 150 CM -HEIGHT 200 CM -WEIGHT ~ 2200 KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-useful width: 1300 mm<br/>panel thickness: 3 - 80 mm<br/>1 x wide belt with segmented pad, belt sizes 2620 x 1350 mm, belt speed 0,5 - 20 m/s, motor 22 kw<br/>1 x wide belt with segmented pad, belt sizes 2620 x 1350 mm, belt speed 0,5 - 20 m/s, motor 22 kw<br/>1 x brush, diameter 150 mm, fibres, motor 1,5 kw<br/>1 x ea dust cleaning machine, roller transport, high speed air cleaning with ionisation removing electrostatic dust<br/>operational side at the right<br/>feed speed 8 - 40 m/min<br/>fixed working height 880 mm USEFUL WIDTH: 1300 MM
PANEL THICKNESS: 3 - 80 MM
1 X WIDE BELT WITH SEGMENTED PAD, BELT SIZES 2620 X 1350 MM, BELT SPEED 0,5 - 20 M/S, MOTOR 22 KW
1 X WIDE BELT WITH SEGMENTED PAD, BELT SIZES 2620 X 1350 MM, BELT SPEED 0,5 - 20 M/S, MOTOR 22 KW
1 X BRUSH, DIAMETER 150 MM, FIBRES, MOTOR 1,5 KW
1 X EA DUST CLEANING MACHINE, ROLLER TRANSPORT, HIGH SPEED AIR CLEANING WITH IONISATION REMOVING ELECTROSTATIC DUST
OPERATIONAL SIDE AT THE RIGHT
FEED SPEED 8 - 40 M/MIN
FIXED WORKING HEIGHT 880 MM
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land--m-machine stock
-after reviewing the technical
-very good condition

technical parameters:

-cutting height 90 mm
-cutting width 200 mm
-diameter of the discs max 250 mm
-barrel diameter 80 mm

-main motor 22 kw
-feed motor 2.2 kw

-adjustable feed speed
-the feed rate to 40 m/min

-height adjustable clamps
-adjustable table height
-ruler

-the two upper rollers
-shoe
-diameter 170 mm and 120 mm

overall dimensions of the machine:
– length 170 cm
-width: 160 cm
-height 150 cm
-weight of ~ 2000 kg -M-MACHINE STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION TECHNICAL PARAMETERS: -CUTTING HEIGHT 90 MM -CUTTING WIDTH 200 MM -DIAMETER OF THE DISCS MAX 250 MM -BARREL DIAMETER 80 MM -MAIN MOTOR 22 KW -FEED MOTOR 2.2 KW -ADJUSTABLE FEED SPEED -THE FEED RATE TO 40 M/MIN -HEIGHT ADJUSTABLE CLAMPS -ADJUSTABLE TABLE HEIGHT -RULER -THE TWO UPPER ROLLERS -SHOE -DIAMETER 170 MM AND 120 MM OVERALL DIMENSIONS OF THE MACHINE: – LENGTH 170 CM -WIDTH: 160 CM -HEIGHT 150 CM -WEIGHT OF ~ 2000 KG
Vendedor: StanDrew
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 2100 mm<br/>description: - measuring range x-axis 500 mm,<br> - measuring range y-axis 700 mm,<br> - table size 200 mm,<br> - tool diameter 100 mm,<br> WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 2100 MM
DESCRIPTION: - MEASURING RANGE X-AXIS 500 MM,
- MEASURING RANGE Y-AXIS 700 MM,
- TABLE SIZE 200 MM,
- TOOL DIAMETER 100 MM,
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MET types: