1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-x-travel: 440mm, y-travel: 695mm, z-travel: 390mm, measuring probe: tesastar-i, acceleration: 1730mm/s², rapid traverse: 350mm/s, compressed air supply: 4bar, compressed air consumption: 21l/min, software: pc-dmis pro, operating system: windows xp, length: 1160mm, width: 1280mm, height: 2320mm, weight: 395kg, including probe set, computer and 17 inch lcd screen.  X-TRAVEL: 440MM, Y-TRAVEL: 695MM, Z-TRAVEL: 390MM, MEASURING PROBE: TESASTAR-I, ACCELERATION: 1730MM/S², RAPID TRAVERSE: 350MM/S, COMPRESSED AIR SUPPLY: 4BAR, COMPRESSED AIR CONSUMPTION: 21L/MIN, SOFTWARE: PC-DMIS PRO, OPERATING SYSTEM: WINDOWS XP, LENGTH: 1160MM, WIDTH: 1280MM, HEIGHT: 2320MM, WEIGHT: 395KG, INCLUDING PROBE SET, COMPUTER AND 17 INCH LCD SCREEN.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 22.000 EU€
Ubicación: Land-the machine is designed for eco-friendly removal of paints and contaminants using a spray of baking soda in various granulations. possibility to use other cleaners - glass, corundum, sand, etc. from the smallest grain granulation (baking soda) to the thickest 2-3 mm. smooth regulation of cleaning power, with surface smooth and rough, without damage. waste throws dry and in water-free modes, hydrodynamically and in a water mix. round nozzles from size # 3 to # 4 and flat nozzles are possible. construction of a carbon and brass steel cleaner, grooved palette. THE MACHINE IS DESIGNED FOR ECO-FRIENDLY REMOVAL OF PAINTS AND CONTAMINANTS USING A SPRAY OF BAKING SODA IN VARIOUS GRANULATIONS. POSSIBILITY TO USE OTHER CLEANERS - GLASS, CORUNDUM, SAND, ETC. FROM THE SMALLEST GRAIN GRANULATION (BAKING SODA) TO THE THICKEST 2-3 MM. SMOOTH REGULATION OF CLEANING POWER, WITH SURFACE SMOOTH AND ROUGH, WITHOUT DAMAGE. WASTE THROWS DRY AND IN WATER-FREE MODES, HYDRODYNAMICALLY AND IN A WATER MIX. ROUND NOZZLES FROM SIZE # 3 TO # 4 AND FLAT NOZZLES ARE POSSIBLE. CONSTRUCTION OF A CARBON AND BRASS STEEL CLEANER, GROOVED PALETTE.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-glass heating furnace gt1411, year 2008

this furnace is used for heat treating of glass. the electric heaters heat up flat glass to desired temperature and the glass can be coated or treated in the coating section. the glass panel is then held in the annealing section for desired time and temperature. the loading and unloading of glass panels is done manually onto and from the roller tables. the conveyers are bushing rubber rollers to prevent the glass from scratching. the rollers are driven individually by frequency motors.

the furnace body is insulated with aluminum silicate for high efficiency. ceramic quartz rollers with low thermal expansion rate are used in heating, coating and front annealing section, and a stainless steel roller wrapped with ropes is used in lower annealing section. the furnace is equipped with an so2 gas feeding device. the feeding of gas lubricates and protects the lower surface of the glass during the production cycle.

the complete delivery includes loading and unloading tables, furnace, control system and auxiliary facilities.

make: qinhuangdao tucheng glass technology co, china
model: gt1411
year: 2008
capacity: 4.0 – 8.5 m/min clear sheet glass
top temperature: 600 - 630 °c
electricity: 250 kw, 380 v, 3-phase
dimensions: 8.0 x 2.9 x 2.4 m (lxwxh)
weight: 10 tons
temperature controller: omron ej1
control plc: siemens simatic s7-300   GLASS HEATING FURNACE GT1411, YEAR 2008 THIS FURNACE IS USED FOR HEAT TREATING OF GLASS. THE ELECTRIC HEATERS HEAT UP FLAT GLASS TO DESIRED TEMPERATURE AND THE GLASS CAN BE COATED OR TREATED IN THE COATING SECTION. THE GLASS PANEL IS THEN HELD IN THE ANNEALING SECTION FOR DESIRED TIME AND TEMPERATURE. THE LOADING AND UNLOADING OF GLASS PANELS IS DONE MANUALLY ONTO AND FROM THE ROLLER TABLES. THE CONVEYERS ARE BUSHING RUBBER ROLLERS TO PREVENT THE GLASS FROM SCRATCHING. THE ROLLERS ARE DRIVEN INDIVIDUALLY BY FREQUENCY MOTORS. THE FURNACE BODY IS INSULATED WITH ALUMINUM SILICATE FOR HIGH EFFICIENCY. CERAMIC QUARTZ ROLLERS WITH LOW THERMAL EXPANSION RATE ARE USED IN HEATING, COATING AND FRONT ANNEALING SECTION, AND A STAINLESS STEEL ROLLER WRAPPED WITH ROPES IS USED IN LOWER ANNEALING SECTION. THE FURNACE IS EQUIPPED WITH AN SO2 GAS FEEDING DEVICE. THE FEEDING OF GAS LUBRICATES AND PROTECTS THE LOWER SURFACE OF THE GLASS DURING THE PRODUCTION CYCLE. THE COMPLETE DELIVERY INCLUDES LOADING AND UNLOADING TABLES, FURNACE, CONTROL SYSTEM AND AUXILIARY FACILITIES. MAKE: QINHUANGDAO TUCHENG GLASS TECHNOLOGY CO, CHINA MODEL: GT1411 YEAR: 2008 CAPACITY: 4.0 – 8.5 M/MIN CLEAR SHEET GLASS TOP TEMPERATURE: 600 - 630 °C ELECTRICITY: 250 KW, 380 V, 3-PHASE DIMENSIONS: 8.0 X 2.9 X 2.4 M (LXWXH) WEIGHT: 10 TONS TEMPERATURE CONTROLLER: OMRON EJ1 CONTROL PLC: SIEMENS SIMATIC S7-300
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 39.000 €
Ubicación: Land-weight approx.: 2500 kg<br/>pressure: 20 to<br/>dimensions (l x w x h) approx.: 1550 x 1800 x 1965 mm<br/>description: <b>this is a demonstration machine in stock!</b><br> ergonomic press brake made of a rigid monoblock frame (mehaanite 700 n/mm²)<br> the machine has a direct drive via servo motor and ball screw which works on tension to avoid deformation.<br> in addition, the machine is equipped with a 6-axis backgauge, a teda quick tool clamp and an iris rapid bend safety device<br> <br> - serial number: fx85610002580<br> - bending capacity: 200 kn<br> - usable bending length: 850 mm<br> - y-axis travel stroke: 1956 mm<br> - y-axis speed: 200 mm/sec<br> - installation height(table to upper bending beam): 470 (395) mm<br> - x axis travel stroke (6 axes x1-x2-r1-r2-z1-z2): 375 mm<br> - r axis travel stroke (6 axes x1-x2-r1-r2-z1-z2: 180 mm<br> - z axis speed (6 axes x1-x2-r1-r2-z1-z2): 744 mm/sec<br> - x axis velocity (6 axes x1-x2-r1-r2-z1-z2): 1000 mm/sec<br> - r axis speed (6 axes x1-x2-r1-r2-z1-z2): 350 mm/sec<br> - z axis speed (6 axes x1-x2-r1-r2-z1-z2): 220 mm/sec<br> - wireless connection / wireless / usb-port: yes / 2<br> - main motor power: 1x5,2 kw<br> - connection power: 5 kwa<br> <br> <b>accessories:</b><br> - top promecam tool holder (without tools) with quick-release lever<br> - below tool holder for amada / promecam and wila plug-in matrices<br> - cnc control panasonic toughbook incl. battery, usb connection and wifi<br> - anti-reflective lcd touchscreen<br> - safety device dual laser<br> - rigid mehaanite monoblock cast iron body tensile strength 700n/mm²<br> - direct drive via servo motor and recirculating ball screw<br> - 2-axle backgauge moves<br> - ergonomic design<br> <br> <b>special accessories:</b><br> teda speed grip quick-change system top, for standard amada/promecam tools<br> 6 axes backgauge x1/x2/r1/r2/z1/z2<br> iris rapid bend, safety device, travels at rapid traverse to the mute point<br> <br> the machine can be transported by forkl WEIGHT APPROX.: 2500 KG
PRESSURE: 20 TO
DIMENSIONS (L X W X H) APPROX.: 1550 X 1800 X 1965 MM
DESCRIPTION: THIS IS A DEMONSTRATION MACHINE IN STOCK!
ERGONOMIC PRESS BRAKE MADE OF A RIGID MONOBLOCK FRAME (MEHAANITE 700 N/MM²)
THE MACHINE HAS A DIRECT DRIVE VIA SERVO MOTOR AND BALL SCREW WHICH WORKS ON TENSION TO AVOID DEFORMATION.
IN ADDITION, THE MACHINE IS EQUIPPED WITH A 6-AXIS BACKGAUGE, A TEDA QUICK TOOL CLAMP AND AN IRIS RAPID BEND SAFETY DEVICE

- SERIAL NUMBER: FX85610002580
- BENDING CAPACITY: 200 KN
- USABLE BENDING LENGTH: 850 MM
- Y-AXIS TRAVEL STROKE: 1956 MM
- Y-AXIS SPEED: 200 MM/SEC
- INSTALLATION HEIGHT(TABLE TO UPPER BENDING BEAM): 470 (395) MM
- X AXIS TRAVEL STROKE (6 AXES X1-X2-R1-R2-Z1-Z2): 375 MM
- R AXIS TRAVEL STROKE (6 AXES X1-X2-R1-R2-Z1-Z2: 180 MM
- Z AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 744 MM/SEC
- X AXIS VELOCITY (6 AXES X1-X2-R1-R2-Z1-Z2): 1000 MM/SEC
- R AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 350 MM/SEC
- Z AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 220 MM/SEC
- WIRELESS CONNECTION / WIRELESS / USB-PORT: YES / 2
- MAIN MOTOR POWER: 1X5,2 KW
- CONNECTION POWER: 5 KWA

ACCESSORIES:
- TOP PROMECAM TOOL HOLDER (WITHOUT TOOLS) WITH QUICK-RELEASE LEVER
- BELOW TOOL HOLDER FOR AMADA / PROMECAM AND WILA PLUG-IN MATRICES
- CNC CONTROL PANASONIC TOUGHBOOK INCL. BATTERY, USB CONNECTION AND WIFI
- ANTI-REFLECTIVE LCD TOUCHSCREEN
- SAFETY DEVICE DUAL LASER
- RIGID MEHAANITE MONOBLOCK CAST IRON BODY TENSILE STRENGTH 700N/MM²
- DIRECT DRIVE VIA SERVO MOTOR AND RECIRCULATING BALL SCREW
- 2-AXLE BACKGAUGE MOVES
- ERGONOMIC DESIGN

SPECIAL ACCESSORIES:
TEDA SPEED GRIP QUICK-CHANGE SYSTEM TOP, FOR STANDARD AMADA/PROMECAM TOOLS
6 AXES BACKGAUGE X1/X2/R1/R2/Z1/Z2
IRIS RAPID BEND, SAFETY DEVICE, TRAVELS AT RAPID TRAVERSE TO THE MUTE POINT

THE MACHINE CAN BE TRANSPORTED BY FORKL
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-head: hesta 3 fach torpedo, inside micrometer: 60mm, screw diameter: 45/ 22d, documentation available, the machine exclusively processed ldpe up until now.  HEAD: HESTA 3 FACH TORPEDO, INSIDE MICROMETER: 60MM, SCREW DIAMETER: 45/ 22D, DOCUMENTATION AVAILABLE, THE MACHINE EXCLUSIVELY PROCESSED LDPE UP UNTIL NOW.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-planetary-mixer,  fabr. rego,  type pm140 e, 140 l, \r\nvariabel speed,  microprocessor controlled\r\nbowl lifting and lowering electric\r\naccessories: 1 bowl stainless steel, 140 l --new--\r\n                    1 whip stainless steel --new--\r\n                    1 flat beater\r\n                    1 doughhook PLANETARY-MIXER, FABR. REGO, TYPE PM140 E, 140 L, \R\NVARIABEL SPEED, MICROPROCESSOR CONTROLLED\R\NBOWL LIFTING AND LOWERING ELECTRIC\R\NACCESSORIES: 1 BOWL STAINLESS STEEL, 140 L --NEW--\R\N 1 WHIP STAINLESS STEEL --NEW--\R\N 1 FLAT BEATER\R\N 1 DOUGHHOOK
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-technical data:

-bandsaw half machine with microprocessor control and manual function
-band saw blade size 4500 x 34.0 x 1.1 mm
-infinitely variable n 15 to 100 m/min cutting speed
-hydr. material clamping stock
-maximum clamping possibility 455 mm - mitre adjustable left to 60 â° right up to 45 â° - cutting capacity at 90 â° round 330 mm
	-square 320 mm
	-flat 450 x 320 mm
	-cutting capacity at 45 â° li + re around 320 mm
	-45 â° li + re flat 300 x 300 mm
	-60 â° li + re flat 200 x 200 mm
-drive 400 v / 4 kw
-coolant system - spã¤nerã¤umbã¼rste - original removal roller 3000 mm
-weight approx.					  	1200 kg - space requirement approx.	                 b h 1800 x 1950 x h 2000 mm
 TECHNICAL DATA: -BANDSAW HALF MACHINE WITH MICROPROCESSOR CONTROL AND MANUAL FUNCTION -BAND SAW BLADE SIZE 4500 X 34.0 X 1.1 MM -INFINITELY VARIABLE N 15 TO 100 M/MIN CUTTING SPEED -HYDR. MATERIAL CLAMPING STOCK -MAXIMUM CLAMPING POSSIBILITY 455 MM - MITRE ADJUSTABLE LEFT TO 60 &ACIRC;&DEG; RIGHT UP TO 45 &ACIRC;&DEG; - CUTTING CAPACITY AT 90 &ACIRC;&DEG; ROUND 330 MM -SQUARE 320 MM -FLAT 450 X 320 MM -CUTTING CAPACITY AT 45 &ACIRC;&DEG; LI + RE AROUND 320 MM -45 &ACIRC;&DEG; LI + RE FLAT 300 X 300 MM -60 &ACIRC;&DEG; LI + RE FLAT 200 X 200 MM -DRIVE 400 V / 4 KW -COOLANT SYSTEM - SP&ATILDE;&CURREN;NER&ATILDE;&CURREN;UMB&ATILDE;&FRAC14;RSTE - ORIGINAL REMOVAL ROLLER 3000 MM -WEIGHT APPROX. 1200 KG - SPACE REQUIREMENT APPROX. B H 1800 X 1950 X H 2000 MM
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-stainless steel, incl. proofer+ suction fan, \r\nbaking chamber:        5 pans   600  x  400 mm\r\nproofing cabinet:      16 pans   600  x  400 mm\r\n STAINLESS STEEL, INCL. PROOFER+ SUCTION FAN, \R\NBAKING CHAMBER: 5 PANS 600 X 400 MM\R\NPROOFING CABINET: 16 PANS 600 X 400 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 25.000 €
Ubicación: Land-mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
- cts overhead travelling crane, year 1987, capacity 2.000 kg
- osmosis filters (about 7 pallets)
- 2 cyclones for dusty material discharge and spare parts set
- hydraulic pistons and plate valves - pulleys and accessories
- sea grids and screen grids
- porcelain insulators - flexible double-walled 
- various new filters - rubberized and non rubberized belt rollers 
- various cast iron pipes with ceramic and non ceramic coating
- large cast iron pipes - steel thicknesses
many lots will be on sale, a complete catalogue of which is published on our website or contact us at 030 7751645 during office hours 9-13, 14:18.
  MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - CTS OVERHEAD TRAVELLING CRANE, YEAR 1987, CAPACITY 2.000 KG - OSMOSIS FILTERS (ABOUT 7 PALLETS) - 2 CYCLONES FOR DUSTY MATERIAL DISCHARGE AND SPARE PARTS SET - HYDRAULIC PISTONS AND PLATE VALVES - PULLEYS AND ACCESSORIES - SEA GRIDS AND SCREEN GRIDS - PORCELAIN INSULATORS - FLEXIBLE DOUBLE-WALLED - VARIOUS NEW FILTERS - RUBBERIZED AND NON RUBBERIZED BELT ROLLERS - VARIOUS CAST IRON PIPES WITH CERAMIC AND NON CERAMIC COATING - LARGE CAST IRON PIPES - STEEL THICKNESSES MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Precio: used machinery auction RESALE 16.670 €
Ubicación: Land-weight approx.: 4350 kg<br/>dimensions (l x w x h) approx.: 2700 x 2000 x 2600 mm<br/>description: deckel maho milltap 700 machining centre<br> <br> spindle is removed and defective<br> chip disposal package<br> control siemens 840d solution line<br> digital progress panel<br> preparation 4th axis lehmann ea-510. leco indirect<br> spindle speed up to 24. 000 rpm bt30<br> tool magazine 25 places<br> direct displacement encoder x,y,z<br> sealing air for direct measuring systems<br> renishaw probe kit for milltap 700<br> flushing gun for chip flushing<br> software package job shop and sinumerik mdynamics<br> handwheel for setup operation<br> ce-version<br> documentation-1 french<br> display screen german/french<br> <br> main machine 2300 x 1700 x 2600 mm, 4000 kg, chip conveyor 2700 x 1800 x 1200 mm, 250 kg, oil tank 1500 x 1200 x 1500 mm, 300 kg, accessories 2000 x 1200 x 1000 mm, 100 kg, loading area on truck 5 m WEIGHT APPROX.: 4350 KG
DIMENSIONS (L X W X H) APPROX.: 2700 X 2000 X 2600 MM
DESCRIPTION: DECKEL MAHO MILLTAP 700 MACHINING CENTRE

SPINDLE IS REMOVED AND DEFECTIVE
CHIP DISPOSAL PACKAGE
CONTROL SIEMENS 840D SOLUTION LINE
DIGITAL PROGRESS PANEL
PREPARATION 4TH AXIS LEHMANN EA-510. LECO INDIRECT
SPINDLE SPEED UP TO 24. 000 RPM BT30
TOOL MAGAZINE 25 PLACES
DIRECT DISPLACEMENT ENCODER X,Y,Z
SEALING AIR FOR DIRECT MEASURING SYSTEMS
RENISHAW PROBE KIT FOR MILLTAP 700
FLUSHING GUN FOR CHIP FLUSHING
SOFTWARE PACKAGE JOB SHOP AND SINUMERIK MDYNAMICS
HANDWHEEL FOR SETUP OPERATION
CE-VERSION
DOCUMENTATION-1 FRENCH
DISPLAY SCREEN GERMAN/FRENCH

MAIN MACHINE 2300 X 1700 X 2600 MM, 4000 KG, CHIP CONVEYOR 2700 X 1800 X 1200 MM, 250 KG, OIL TANK 1500 X 1200 X 1500 MM, 300 KG, ACCESSORIES 2000 X 1200 X 1000 MM, 100 KG, LOADING AREA ON TRUCK 5 M
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cct fermenting tank 10 x 1200 hl dizio

conical cone fermenting tanks (cct) with gross capacity 1200 hl and net 1016 hl. all tanks are identical, made by italian dizio costruccioni meccaniche s.p.a - all made in year 1987. tanks are vertical outdoor type with 150 mm pu insulation, designed for seismic zone 2, supported from the bottom ring (no legs), with three (glycol) cooling zones, two on the side + cone. tanks have mechanical cooling control as well as product handling valve system. generally tanks are in good condition and they have a high hygienic level.

technical data
made by: dizio
made in year: 1987
number of tanks: 10 pcs
type: outdoor vertical
insulation: 150 mm pu
volume gross / net: 1200 / 1016 hl
design pressure: 1.5 bar + statistical pressure
cooling media: glycol - water solution
cooling zones: 3 (including cone)
tank inner diameter: 4800 mm
total height: approx 10.5 m   CCT FERMENTING TANK 10 X 1200 HL DIZIO CONICAL CONE FERMENTING TANKS (CCT) WITH GROSS CAPACITY 1200 HL AND NET 1016 HL. ALL TANKS ARE IDENTICAL, MADE BY ITALIAN DIZIO COSTRUCCIONI MECCANICHE S.P.A - ALL MADE IN YEAR 1987. TANKS ARE VERTICAL OUTDOOR TYPE WITH 150 MM PU INSULATION, DESIGNED FOR SEISMIC ZONE 2, SUPPORTED FROM THE BOTTOM RING (NO LEGS), WITH THREE (GLYCOL) COOLING ZONES, TWO ON THE SIDE + CONE. TANKS HAVE MECHANICAL COOLING CONTROL AS WELL AS PRODUCT HANDLING VALVE SYSTEM. GENERALLY TANKS ARE IN GOOD CONDITION AND THEY HAVE A HIGH HYGIENIC LEVEL. TECHNICAL DATA MADE BY: DIZIO MADE IN YEAR: 1987 NUMBER OF TANKS: 10 PCS TYPE: OUTDOOR VERTICAL INSULATION: 150 MM PU VOLUME GROSS / NET: 1200 / 1016 HL DESIGN PRESSURE: 1.5 BAR + STATISTICAL PRESSURE COOLING MEDIA: GLYCOL - WATER SOLUTION COOLING ZONES: 3 (INCLUDING CONE) TANK INNER DIAMETER: 4800 MM TOTAL HEIGHT: APPROX 10.5 M
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec flowwrap f150-2xl80gn - 1 rotary knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 480mm | 1 rotating knife | 220v, 2.8kw | no compressed air required | max. speed of the machine in neutral: 150 cycles/min | max. bag (not product) dimensions (mm): l(100-450)xw(50-210)xh(0-80) | machine dimensions (mm): l3990xw900xh1468 | weight (net/gross): 900/950kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F150-2XL80GN - 1 ROTARY KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 480MM | 1 ROTATING KNIFE | 220V, 2.8KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 150 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(100-450)XW(50-210)XH(0-80) | MACHINE DIMENSIONS (MM): L3990XW900XH1468 | WEIGHT (NET/GROSS): 900/950KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-fermenting tank cct 910 hl holvrieka / dizio

conical cone fermenting tanks (cct) with gross capacity 910 hl and net 800 hl. all tanks are identical, made either by hovrieka or by italian dizio costruccioni meccaniche s.p.a - all made in year 1987. tanks are vertical outdoor type with 150 mm pu insulation, designed for seismic zone 2, supported from the bottom ring (no legs), with three (glycol) cooling zones, two on the side + cone. tanks have mechanical cooling control as well as product handling valve system and outside on tank skirt, there are two sample taking valves. the cones has been refurbished / modernized by changing sample taking valve and adding level sensor. generally tanks are in good condition and they have a high hygienic level.

technical data
made by: holvrieka / dizio
made in year: 1987
number of tanks: 36 pcs
type: outdoor vertical
insulation: 150 mm pu
volume gross / net: 910 / 800 hl
design pressure: 1.5 bar + statistical pressure
cooling media: glycol - water solution
cooling zones: 3 (including cone)
tank inner diameter: 4800 mm
total height: 9775 mm   FERMENTING TANK CCT 910 HL HOLVRIEKA / DIZIO CONICAL CONE FERMENTING TANKS (CCT) WITH GROSS CAPACITY 910 HL AND NET 800 HL. ALL TANKS ARE IDENTICAL, MADE EITHER BY HOVRIEKA OR BY ITALIAN DIZIO COSTRUCCIONI MECCANICHE S.P.A - ALL MADE IN YEAR 1987. TANKS ARE VERTICAL OUTDOOR TYPE WITH 150 MM PU INSULATION, DESIGNED FOR SEISMIC ZONE 2, SUPPORTED FROM THE BOTTOM RING (NO LEGS), WITH THREE (GLYCOL) COOLING ZONES, TWO ON THE SIDE + CONE. TANKS HAVE MECHANICAL COOLING CONTROL AS WELL AS PRODUCT HANDLING VALVE SYSTEM AND OUTSIDE ON TANK SKIRT, THERE ARE TWO SAMPLE TAKING VALVES. THE CONES HAS BEEN REFURBISHED / MODERNIZED BY CHANGING SAMPLE TAKING VALVE AND ADDING LEVEL SENSOR. GENERALLY TANKS ARE IN GOOD CONDITION AND THEY HAVE A HIGH HYGIENIC LEVEL. TECHNICAL DATA MADE BY: HOLVRIEKA / DIZIO MADE IN YEAR: 1987 NUMBER OF TANKS: 36 PCS TYPE: OUTDOOR VERTICAL INSULATION: 150 MM PU VOLUME GROSS / NET: 910 / 800 HL DESIGN PRESSURE: 1.5 BAR + STATISTICAL PRESSURE COOLING MEDIA: GLYCOL - WATER SOLUTION COOLING ZONES: 3 (INCLUDING CONE) TANK INNER DIAMETER: 4800 MM TOTAL HEIGHT: 9775 MM
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec flowwrap f40-2xl110gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 600mm | 1 pendular knife | 220v, 3.6kw | no compressed air required | max. speed of the machine in neutral: 40 cycles/min | max. bag (not product) dimensions (mm): l(120-450)xw(50-200)xh(10-110) | machine dimensions (mm): l4380xw970xh1500 | weight (net/gross): 1160/1260kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F40-2XL110GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 600MM | 1 PENDULAR KNIFE | 220V, 3.6KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 40 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(120-450)XW(50-200)XH(10-110) | MACHINE DIMENSIONS (MM): L4380XW970XH1500 | WEIGHT (NET/GROSS): 1160/1260KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-
technical data:

brand: micron

type: wf 21 c.

control: heidenhain tnc 155

traverse path x / y / z: 400 / 400 / 400 mm
feed x / y / z: 2 - 3000 mm / min
rapid traverse x / y / z: 6'000 / 6'000 / 5'000 mm/min
table size b x t: 800 x 460 mm
spindle speed: 31.5 - 3150 rpm / 21 levels
spindle taper: iso 40 / m 16

weight: 2200 kg
machine dimensions w x d x h: ca. 2650 x 2900 x 2000 mm
 TECHNICAL DATA: BRAND: MICRON TYPE: WF 21 C. CONTROL: HEIDENHAIN TNC 155 TRAVERSE PATH X / Y / Z: 400 / 400 / 400 MM FEED X / Y / Z: 2 - 3000 MM / MIN RAPID TRAVERSE X / Y / Z: 6'000 / 6'000 / 5'000 MM/MIN TABLE SIZE B X T: 800 X 460 MM SPINDLE SPEED: 31.5 - 3150 RPM / 21 LEVELS SPINDLE TAPER: ISO 40 / M 16 WEIGHT: 2200 KG MACHINE DIMENSIONS W X D X H: CA. 2650 X 2900 X 2000 MM
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Ubicación: Land-amtec flowwrap f80-xl80gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 450mm | 1 pendular knife | 220v, 3.2kw | no compressed air required | max. speed of the machine in neutral: 80 cycles/min | max. bag (not product): dimensions (mm): l(120-450)xw(50-160)xh(10-80) | machine dimensions (mm): l4380xw870xh1500 | weight (net/gross): 960/1060kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F80-XL80GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 450MM | 1 PENDULAR KNIFE | 220V, 3.2KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 80 CYCLES/MIN | MAX. BAG (NOT PRODUCT): DIMENSIONS (MM): L(120-450)XW(50-160)XH(10-80) | MACHINE DIMENSIONS (MM): L4380XW870XH1500 | WEIGHT (NET/GROSS): 960/1060KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-va oferim rafturi depozitare metalice modulare, profesionale, la standarde europene. sistemele de rafturi metalice industriale pentru depozitare paleti, avand dimensiuni variabile, pentru produse diverse, indiferent de volum sau greutate, reprezinta solutia noastra de valorificare cat mai rentabila a oricarui spatiu. sistemele de rafturi depozitare se utilizeaza intr-un domeniu larg de tip de depozitare si de sarcini, iar cu alegerea elementelor potrivite putem oferta sisteme de depozitare cel mai economic pentru necesitatea de depozitare a fiecarui client.
abcs://tehnologistica.ro/rafturi-depozitare/ VA OFERIM RAFTURI DEPOZITARE METALICE MODULARE, PROFESIONALE, LA STANDARDE EUROPENE. SISTEMELE DE RAFTURI METALICE INDUSTRIALE PENTRU DEPOZITARE PALETI, AVAND DIMENSIUNI VARIABILE, PENTRU PRODUSE DIVERSE, INDIFERENT DE VOLUM SAU GREUTATE, REPREZINTA SOLUTIA NOASTRA DE VALORIFICARE CAT MAI RENTABILA A ORICARUI SPATIU. SISTEMELE DE RAFTURI DEPOZITARE SE UTILIZEAZA INTR-UN DOMENIU LARG DE TIP DE DEPOZITARE SI DE SARCINI, IAR CU ALEGEREA ELEMENTELOR POTRIVITE PUTEM OFERTA SISTEME DE DEPOZITARE CEL MAI ECONOMIC PENTRU NECESITATEA DE DEPOZITARE A FIECARUI CLIENT. ABCS://TEHNOLOGISTICA.RO/RAFTURI-DEPOZITARE/ Va ofrecemos rafturi depozitare metalice modulare la standarde europene, profesionale. Sistemele de rafturi metalice industriale pentru depozitare paleti, avand dimensiuni variabile, pentru produse diversos, indiferente de volum sau greutate, reprezinta solutia noastra de valorificare cat mai rentabila una spatiu oricarui. Sistemele de rafturi depozitare se utilizeaza intr-un domeniu larg de punta de depozitare si de sarcini, iar alegerea cu elementelor potrivite putem oferta sisteme de depozitare cel mai económica pentru necesitatea de depozitare un cliente fiecarui. ABCs://tehnologistica.ro/rafturi-depozitare/
Vendedor: Tehnologistica

Estantes de materiales more

Año de construcción: usado
Ubicación: Land-amtec flowwrap f80-2xl80gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 600mm | 1 pendular knife | 220v, 3.6kw | no compressed air required | max. speed of the machine in neutral: 80 cycles/min | max. bag (not product) dimensions (mm): l(120-450)xw(50-200)xh(10-80) | machine dimensions (mm): l4380xw970xh1500 | weight (net/gross): 1160/1260kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F80-2XL80GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 600MM | 1 PENDULAR KNIFE | 220V, 3.6KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 80 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(120-450)XW(50-200)XH(10-80) | MACHINE DIMENSIONS (MM): L4380XW970XH1500 | WEIGHT (NET/GROSS): 1160/1260KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-wir verkaufen (please see information in english further down):

2 x ibm 9843-ae1 flashsystem 840

each configured with:

- 2 x af15 fc/fcoe host interface card
- 4 x af1b 1tb emlc flash module


mehr information auf anfrage.

wir freuen uns ueber anfragen aus deutschland und international.

wir haben viele weitere refurbished/gebrauchte hardware aus den bereichen, der hier genannten systeme sowie aus bereichen weiterer systeme dieser hersteller zur verfügung: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

wir verfügen außerdem zu jeder zeit über große mengen an systemkomponenten von: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

geprüfte, getestete gebrauchthardware günstig von hascon!


we have available over 90% of the hardware of all notable manufacturers that has been on the market for over 12 months, e.g., from: 

oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

we also have available, at any time, large numbers of components by oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya
 WIR VERKAUFEN (PLEASE SEE INFORMATION IN ENGLISH FURTHER DOWN): 2 X IBM 9843-AE1 FLASHSYSTEM 840 EACH CONFIGURED WITH: - 2 X AF15 FC/FCOE HOST INTERFACE CARD - 4 X AF1B 1TB EMLC FLASH MODULE MEHR INFORMATION AUF ANFRAGE. WIR FREUEN UNS UEBER ANFRAGEN AUS DEUTSCHLAND UND INTERNATIONAL. WIR HABEN VIELE WEITERE REFURBISHED/GEBRAUCHTE HARDWARE AUS DEN BEREICHEN, DER HIER GENANNTEN SYSTEME SOWIE AUS BEREICHEN WEITERER SYSTEME DIESER HERSTELLER ZUR VERFüGUNG: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WIR VERFüGEN AUßERDEM ZU JEDER ZEIT üBER GROßE MENGEN AN SYSTEMKOMPONENTEN VON: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA GEPRüFTE, GETESTETE GEBRAUCHTHARDWARE GüNSTIG VON HASCON! WE HAVE AVAILABLE OVER 90% OF THE HARDWARE OF ALL NOTABLE MANUFACTURERS THAT HAS BEEN ON THE MARKET FOR OVER 12 MONTHS, E.G., FROM: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WE ALSO HAVE AVAILABLE, AT ANY TIME, LARGE NUMBERS OF COMPONENTS BY ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA
Vendedor: Hascon
Año de construcción: usado
Ubicación: Land-amtec flowwrap f120-l60bp - 1 pendular knife - bottom film feed<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, medium/larger products. infeed table with automatic transport through pushers into the machine. film supply from the bottom for product with low stability, with humidity or some stickiness (to be tested/confirmed). automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 350mm | 1 pendular knife | 220v, 2.4kw | no compressed air required | max. speed of the machine in neutral: 120 cycles/min | max. bag (not product) dimensions (mm): l(110-330)xw(30-130)xh(10-60) | machine dimensions (mm): l3670xw820xh1410 | weight (net/gross): 800/850kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F120-L60BP - 1 PENDULAR KNIFE - BOTTOM FILM FEED

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, MEDIUM/LARGER PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. FILM SUPPLY FROM THE BOTTOM FOR PRODUCT WITH LOW STABILITY, WITH HUMIDITY OR SOME STICKINESS (TO BE TESTED/CONFIRMED). AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 350MM | 1 PENDULAR KNIFE | 220V, 2.4KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 120 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(110-330)XW(30-130)XH(10-60) | MACHINE DIMENSIONS (MM): L3670XW820XH1410 | WEIGHT (NET/GROSS): 800/850KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-wir verkaufen (please see information in english further down):

2 x netapp fas2554, 

each configured with:

- 24 x 2tb disks


mehr information auf anfrage.

wir freuen uns ueber anfragen aus deutschland und international.

wir haben viele weitere refurbished/gebrauchte hardware aus den bereichen, der hier genannten systeme sowie aus bereichen weiterer systeme dieser hersteller zur verfügung: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

wir verfügen außerdem zu jeder zeit über große mengen an systemkomponenten von: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

geprüfte, getestete gebrauchthardware günstig von hascon!


we have available over 90% of the hardware of all notable manufacturers that has been on the market for over 12 months, e.g., from: 

oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

we also have available, at any time, large numbers of components by oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya
 WIR VERKAUFEN (PLEASE SEE INFORMATION IN ENGLISH FURTHER DOWN): 2 X NETAPP FAS2554, EACH CONFIGURED WITH: - 24 X 2TB DISKS MEHR INFORMATION AUF ANFRAGE. WIR FREUEN UNS UEBER ANFRAGEN AUS DEUTSCHLAND UND INTERNATIONAL. WIR HABEN VIELE WEITERE REFURBISHED/GEBRAUCHTE HARDWARE AUS DEN BEREICHEN, DER HIER GENANNTEN SYSTEME SOWIE AUS BEREICHEN WEITERER SYSTEME DIESER HERSTELLER ZUR VERFüGUNG: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WIR VERFüGEN AUßERDEM ZU JEDER ZEIT üBER GROßE MENGEN AN SYSTEMKOMPONENTEN VON: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA GEPRüFTE, GETESTETE GEBRAUCHTHARDWARE GüNSTIG VON HASCON! WE HAVE AVAILABLE OVER 90% OF THE HARDWARE OF ALL NOTABLE MANUFACTURERS THAT HAS BEEN ON THE MARKET FOR OVER 12 MONTHS, E.G., FROM: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WE ALSO HAVE AVAILABLE, AT ANY TIME, LARGE NUMBERS OF COMPONENTS BY ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA
Vendedor: Hascon
Año de construcción: usado
Ubicación: Land-amtec flowwrap f120-l60gp - 1 pendular knife - guiding device<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 350mm | 1 pendular knife | 220v, 2.4kw | no compressed air required | max. speed of the machine in neutral: 120 cycles/min | max. bag (not product) dimensions (mm): l(110-330)xw(30-130)xh(10-60) | machine dimensions (mm): l3670xw820xh1410 | weight (net/gross): 800/850kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F120-L60GP - 1 PENDULAR KNIFE - GUIDING DEVICE

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 350MM | 1 PENDULAR KNIFE | 220V, 2.4KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 120 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(110-330)XW(30-130)XH(10-60) | MACHINE DIMENSIONS (MM): L3670XW820XH1410 | WEIGHT (NET/GROSS): 800/850KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-wir verkaufen (please see information in english further down):

- 50 x hp 2510-24 switch - j9019b
these are used switches

- 2 x hp 2510-48 switch - j9020a
these are used switches

- 4 x hp 2530-24 switch - j9782a
these are used switches

- 5 x hp2530-48 port switch- j9778a
these are new switches, nib


mehr information auf anfrage.

wir freuen uns ueber anfragen aus deutschland und international.

wir haben viele weitere refurbished/gebrauchte hardware aus den bereichen, der hier genannten systeme sowie aus bereichen weiterer systeme dieser hersteller zur verfügung: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

wir verfügen außerdem zu jeder zeit über große mengen an systemkomponenten von: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

geprüfte, getestete gebrauchthardware günstig von hascon!


we have available over 90% of the hardware of all notable manufacturers that has been on the market for over 12 months, e.g., from: 

oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

we also have available, at any time, large numbers of components by oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya
 WIR VERKAUFEN (PLEASE SEE INFORMATION IN ENGLISH FURTHER DOWN): - 50 X HP 2510-24 SWITCH - J9019B THESE ARE USED SWITCHES - 2 X HP 2510-48 SWITCH - J9020A THESE ARE USED SWITCHES - 4 X HP 2530-24 SWITCH - J9782A THESE ARE USED SWITCHES - 5 X HP2530-48 PORT SWITCH- J9778A THESE ARE NEW SWITCHES, NIB MEHR INFORMATION AUF ANFRAGE. WIR FREUEN UNS UEBER ANFRAGEN AUS DEUTSCHLAND UND INTERNATIONAL. WIR HABEN VIELE WEITERE REFURBISHED/GEBRAUCHTE HARDWARE AUS DEN BEREICHEN, DER HIER GENANNTEN SYSTEME SOWIE AUS BEREICHEN WEITERER SYSTEME DIESER HERSTELLER ZUR VERFüGUNG: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WIR VERFüGEN AUßERDEM ZU JEDER ZEIT üBER GROßE MENGEN AN SYSTEMKOMPONENTEN VON: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA GEPRüFTE, GETESTETE GEBRAUCHTHARDWARE GüNSTIG VON HASCON! WE HAVE AVAILABLE OVER 90% OF THE HARDWARE OF ALL NOTABLE MANUFACTURERS THAT HAS BEEN ON THE MARKET FOR OVER 12 MONTHS, E.G., FROM: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WE ALSO HAVE AVAILABLE, AT ANY TIME, LARGE NUMBERS OF COMPONENTS BY ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA
Vendedor: Hascon
Año de construcción: usado
Ubicación: Land-amtec flowwrap f230-l40b - 2 rotary knives - bottom film feed<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, small products. infeed table with automatic transport through pushers into the machine. film supply from the bottom for product with low stability, with humidity or some stickiness (to be tested/confirmed). automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 350mm | 2 rotating knives | 220v, 2.8kw | no compressed air required | max. speed of the machine in neutral: 230 cycles/min | max. bag (not product) dimensions (mm): l((65-190)or(120-280))xw(50-160)xh(0-40) | machine dimensions (mm): l4020xw720xh1320 | weight (net/gross): 800/850kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F230-L40B - 2 ROTARY KNIVES - BOTTOM FILM FEED

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, SMALL PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. FILM SUPPLY FROM THE BOTTOM FOR PRODUCT WITH LOW STABILITY, WITH HUMIDITY OR SOME STICKINESS (TO BE TESTED/CONFIRMED). AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 350MM | 2 ROTATING KNIVES | 220V, 2.8KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 230 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L((65-190)OR(120-280))XW(50-160)XH(0-40) | MACHINE DIMENSIONS (MM): L4020XW720XH1320 | WEIGHT (NET/GROSS): 800/850KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-measurement machine tesa micro hite 3d mh3d 454
measuring movements: manual / motorized
measuring volume (mm): 460 x 510 x 420
mpee (î¼m) (l in mm): 3 + 4 l / 1000
dimensions of the measuring instrument: 970 x 930 x 1700
l x d x h (mm)
with granite table: 210
machine is only free from september 2019! MEASUREMENT MACHINE TESA MICRO HITE 3D MH3D 454 MEASURING MOVEMENTS: MANUAL / MOTORIZED MEASURING VOLUME (MM): 460 X 510 X 420 MPEE (&ICIRC;&FRAC14;M) (L IN MM): 3 + 4 L / 1000 DIMENSIONS OF THE MEASURING INSTRUMENT: 970 X 930 X 1700 L X D X H (MM) WITH GRANITE TABLE: 210 MACHINE IS ONLY FREE FROM SEPTEMBER 2019!
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-amtec flowwrap f230-m40b - 2 rotary knives - bottom film feed<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, small products. infeed table with automatic transport through pushers into the machine. film supply from the bottom for product with low stability, with humidity or some stickiness (to be tested/confirmed). automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 250mm | 2 rotating knives | 220v, 2.4kw | no compressed air required | max. speed of the machine in neutral: 230 cycles/min | max. bag (not product) dimensions (mm): l((65-190)or(120-280))xw(30-110)xh(0-40) | machine dimensions (mm): l3920xw670xh1320 | weight (net/gross): 700/750kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F230-M40B - 2 ROTARY KNIVES - BOTTOM FILM FEED

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, SMALL PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. FILM SUPPLY FROM THE BOTTOM FOR PRODUCT WITH LOW STABILITY, WITH HUMIDITY OR SOME STICKINESS (TO BE TESTED/CONFIRMED). AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 250MM | 2 ROTATING KNIVES | 220V, 2.4KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 230 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L((65-190)OR(120-280))XW(30-110)XH(0-40) | MACHINE DIMENSIONS (MM): L3920XW670XH1320 | WEIGHT (NET/GROSS): 700/750KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-wir verkaufen (please see information in english further down):

1.) 20 x hp compaq elitedesk 8200 usdt (p/n: xl511av)
- 1 x intel core i5-2400s (2.50ghz)
- 4gb ram
- 256gb hdd


2.) 40 x hp z400 workstation (p/n: vs933av)
- 1 x intel xeon cpu w3690 (3,46ghz, 12mb cache, 6 cores)
- 16gb ram
- 300gb hdds
- nvidia quadro 2000 (1gb ram)


mehr information auf anfrage.

wir freuen uns ueber anfragen aus deutschland und international.

wir haben viele weitere refurbished/gebrauchte hardware aus den bereichen, der hier genannten systeme sowie aus bereichen weiterer systeme dieser hersteller zur verfügung: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

wir verfügen außerdem zu jeder zeit über große mengen an systemkomponenten von: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

geprüfte, getestete gebrauchthardware günstig von hascon!


we have available over 90% of the hardware of all notable manufacturers that has been on the market for over 12 months, e.g., from: 

oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

we also have available, at any time, large numbers of components by oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya
 WIR VERKAUFEN (PLEASE SEE INFORMATION IN ENGLISH FURTHER DOWN): 1.) 20 X HP COMPAQ ELITEDESK 8200 USDT (P/N: XL511AV) - 1 X INTEL CORE I5-2400S (2.50GHZ) - 4GB RAM - 256GB HDD 2.) 40 X HP Z400 WORKSTATION (P/N: VS933AV) - 1 X INTEL XEON CPU W3690 (3,46GHZ, 12MB CACHE, 6 CORES) - 16GB RAM - 300GB HDDS - NVIDIA QUADRO 2000 (1GB RAM) MEHR INFORMATION AUF ANFRAGE. WIR FREUEN UNS UEBER ANFRAGEN AUS DEUTSCHLAND UND INTERNATIONAL. WIR HABEN VIELE WEITERE REFURBISHED/GEBRAUCHTE HARDWARE AUS DEN BEREICHEN, DER HIER GENANNTEN SYSTEME SOWIE AUS BEREICHEN WEITERER SYSTEME DIESER HERSTELLER ZUR VERFüGUNG: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WIR VERFüGEN AUßERDEM ZU JEDER ZEIT üBER GROßE MENGEN AN SYSTEMKOMPONENTEN VON: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA GEPRüFTE, GETESTETE GEBRAUCHTHARDWARE GüNSTIG VON HASCON! WE HAVE AVAILABLE OVER 90% OF THE HARDWARE OF ALL NOTABLE MANUFACTURERS THAT HAS BEEN ON THE MARKET FOR OVER 12 MONTHS, E.G., FROM: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WE ALSO HAVE AVAILABLE, AT ANY TIME, LARGE NUMBERS OF COMPONENTS BY ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA
Vendedor: Hascon
Año de construcción: usado
Ubicación: Land-amtec flowwrap f150-xl65g - 1 rotary knife - guiding device<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 400mm | 1 rotating knife | 220v, 2.8kw | no compressed air required | max. speed of the machine in neutral: 150 cycles/min | max. bag (not product) dimensions (mm): l(150-400)xw(50-180)xh(0-65) | machine dimensions (mm): l4020xw800xh1450 | weight (net/gross): 900/950kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F150-XL65G - 1 ROTARY KNIFE - GUIDING DEVICE

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 400MM | 1 ROTATING KNIFE | 220V, 2.8KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 150 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(150-400)XW(50-180)XH(0-65) | MACHINE DIMENSIONS (MM): L4020XW800XH1450 | WEIGHT (NET/GROSS): 900/950KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-wir verkaufen (please see information in english further down):

7 x ws-c2960x-24ps-l v01
22 x ws-c2960x-24ts-l v03
3 x ws-c2960x-24psq-l v01
170 x air-cap2602i-e-k9
2 x air-cap2602i-e-k9 nib, original new packaging
2 x wireless controller (cluster) air-ct5508-k9 (500 licences)
2 x wireless controller (cluster) air-ct5508-k9 (500 licences)
2 x wireless controller (cluster) air-ct5508-k9 (110 licences)


mehr information auf anfrage.

wir freuen uns ueber anfragen aus deutschland und international.

wir haben viele weitere refurbished/gebrauchte hardware aus den bereichen, der hier genannten systeme sowie aus bereichen weiterer systeme dieser hersteller zur verfügung: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

wir verfügen außerdem zu jeder zeit über große mengen an systemkomponenten von: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

geprüfte, getestete gebrauchthardware günstig von hascon!


we have available over 90% of the hardware of all notable manufacturers that has been on the market for over 12 months, e.g., from: 

oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

we also have available, at any time, large numbers of components by oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

  WIR VERKAUFEN (PLEASE SEE INFORMATION IN ENGLISH FURTHER DOWN): 7 X WS-C2960X-24PS-L V01 22 X WS-C2960X-24TS-L V03 3 X WS-C2960X-24PSQ-L V01 170 X AIR-CAP2602I-E-K9 2 X AIR-CAP2602I-E-K9 NIB, ORIGINAL NEW PACKAGING 2 X WIRELESS CONTROLLER (CLUSTER) AIR-CT5508-K9 (500 LICENCES) 2 X WIRELESS CONTROLLER (CLUSTER) AIR-CT5508-K9 (500 LICENCES) 2 X WIRELESS CONTROLLER (CLUSTER) AIR-CT5508-K9 (110 LICENCES) MEHR INFORMATION AUF ANFRAGE. WIR FREUEN UNS UEBER ANFRAGEN AUS DEUTSCHLAND UND INTERNATIONAL. WIR HABEN VIELE WEITERE REFURBISHED/GEBRAUCHTE HARDWARE AUS DEN BEREICHEN, DER HIER GENANNTEN SYSTEME SOWIE AUS BEREICHEN WEITERER SYSTEME DIESER HERSTELLER ZUR VERFüGUNG: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WIR VERFüGEN AUßERDEM ZU JEDER ZEIT üBER GROßE MENGEN AN SYSTEMKOMPONENTEN VON: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA GEPRüFTE, GETESTETE GEBRAUCHTHARDWARE GüNSTIG VON HASCON! WE HAVE AVAILABLE OVER 90% OF THE HARDWARE OF ALL NOTABLE MANUFACTURERS THAT HAS BEEN ON THE MARKET FOR OVER 12 MONTHS, E.G., FROM: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WE ALSO HAVE AVAILABLE, AT ANY TIME, LARGE NUMBERS OF COMPONENTS BY ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA
Vendedor: Hascon
Año de construcción: usado
Ubicación: Land-amtec flowwrap f150-xl75g - 1 rotary knife - guiding device<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 450mm | 1 rotating knife | 220v, 2.8kw | no compressed air required | max. speed of the machine in neutral: 150 cycles/min | max. bag (not product) dimensions (mm): l(130-450)xw(50-180)xh(0-75) | machine dimensions (mm): l4020xw820xh1450 | weight (net/gross): 950/1000kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F150-XL75G - 1 ROTARY KNIFE - GUIDING DEVICE

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 450MM | 1 ROTATING KNIFE | 220V, 2.8KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 150 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(130-450)XW(50-180)XH(0-75) | MACHINE DIMENSIONS (MM): L4020XW820XH1450 | WEIGHT (NET/GROSS): 950/1000KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-cassette for warehouse, about 1,539 cassettes, cassette length 6, 50 m, 3, 000 kg/kasstte - used -:
 
price on request!
 
manufacturer: fehr
year of construction: 2001
cassettes ges. 1,539 units
specification
1 electrically operated double table long good stack machine, automatically controlled, for the storage and retrieval of for good material, with the help of cassettes
technical data:
capacity 2x3000kg
bottom load table position above ground 700 mm
top load table position above ground 12110 mm
room height 13'450 mm
lifting speed 35 m / min
travel speed 80 m / min
pull-out speed 85 m / min
operating voltage, three-phase 400 v / 50 hz
control voltage 230 v / 50 hz
24 v dc
cassette type internal dimensions (wxhxl) a 520 x 270 x 6500 mm
type b 520 x 520 x 6500 mm
device performance at 100% load 46 ds / h
according to fem based on ub-3000 9.851
pull-out force on the cassette gripper (20% of the payload plus cartridge weight)
 
control automatically arranged using an automatic control over operating terminal, at the camp office
1. 1 double-sided track, length approx 29 m
to hang up on the concrete floor, consisting of:
the two rails of a 55, with the shocks, complete with attachment fittings and the limit stops. the rails are with fade-free special grout under poured.
2. 1 longitudinal-power supply, length approx 29 m, consisting of:
vahle plastic conductor line, with guard, complete with the mounting brackets.
3. 1 long goods stacking devices, consisting of:
camp 2 head straps welded design, with the chassis, this consisting of wã¤lzge controlled from the two engines with shaft mounted gearboxes built-on, as well as the 4 - crane wheels, with leadership roles, running laterally on the road,
2 columns in welded box construction, with the guides for the lifters from material performed st 52.3, screwed on the head straps, including the stiffening frame, as well as a ladder of descent,.
1 pallet truck, consisting of: the steel construction with the necessary rubber buffers for the two hã¶henend positions, the roller bearing support and leadership roles, the double cassette table with glides, the extractor, the centering with side guard rails to complete the box, complete with the runners for the gripper, the drive motors, sprockets, shafts, chains and electrical installation,
controls the horizontal, which â«fachbelegtâ».
as a hoist is used:
1 controlled engine
with intermediate gear (designed according to fem 3 m) and drum includes cords and ball-bearing pulleys; security 12, with double-grooved rope drum, dust-protected bearings drum bearing,
rope pulleys conditions according to din 15020.
4. electrical installation, comprising:
-the special cables, including all required terminal boxes, connecting cables fixed installed on the device
-the flexible power supply in cable caterpillar to the trucks,
-completely wired cabinet incl. contactor and the necessary controls, the mushroom-head pushbutton, which shuts off the main contactor (red mushroom can be rotated), switch with push button, key switch
-the two key selector switches, which are used for the pre-selection of the operating modes â«tip operation/automatic modeâ»,
the limit switches for the limitation of the lifting and moving
-the reciprocal locking of lifting and suspension compared to the ausziehvorâ¬
-direction, the laterally mounted clamping wires to the continuous control of the speed profile
-the profile control, which monitors whether the space between the shelf and device is free,
-the output fuse, which prevents that cassettes in a free space be outsourced,
-excess height control, which prevents a training and storage of high-loaded cartridges,
-the control of tape position on the table,
-the fault indicator in the control panel on the lift truck,
-the operating hour counters for driving and lifting mechanism
displacement measuring systems
the wear-free optical measuring system guarantees maximum service life and precise way capture of the x - and y-coordinates. the way capture of the two gripper through the absolute value encoder is located in the millimetre range. both systems deliver the absolutely correct readings again even after a power failure. thus it takes no movements for repositioning and the device starts working immediately without delay.
driving behavior
driving in the x and y axes is such that at the maximum possible speed infinitely variable over short or long distances optimal speed curves are driven. the behavior of the device dimensions at various distances is taken into account and flows as a control variable with a. the pendulum effect is compensated with counteract the driving curve characteristics,
learning functions
the computer software is so forward-looking that hardly a parameterization of various sizes must be done by the programmer. the software adaptation to different design types of device and storage compartments is done through the learning and self-learning onsite. following learning processes take place during commissioning on site:
-self-learning of the xy-driving behavior
-learning of the gripper behavior
-learning the transfer and recording places of the periphery
self learning the topology of all storage compartments of different arrangement and sizes
operating modes
-jog
the long good stacking device in the direction of travel, the truck and the two pull-out devices can be moved with the control buttons.
-semi automatic (automatic start-up), arranged in the stationary cupboard.
with the hand-held micro terminal, various movements are run separately or in combination automatically:
-driving horizontal
vertical lifting/lowering
-pull cassette
-slide tape
-positioning in front of the nearest
option
pc-cabinet for m fs calculator
execution: wxhxd 600 x 1900 x 600 mm
4-field 17 "monitor field of vision
part of front door for computer unit
integrated keyboard tray
storage compartment with removable rails
socket 100 mm
(ii) peripheral components, including:
1 1 carousel ka-3000 gr gr
for cassettes with rods
technical data:
capacity/capacity 3000 kg
number of pitches 4
conveying speed along 24 m / min
cross conveyor speed 40 m / min
height from top of floor 700 mm
operating voltage 400 v / 50 hz
control voltage 230 v / 50 hz
the cartridge space tracking via the automatic control. the carousel consists in particular of:
outsourcing train, consisting of:
-the steel foot plates and anchors, directly on the ground turned off and integrated into the shelf, suitable for the installation of the required mechanical parts
-the spezialgleitem, as well as the lateral guide
-the gripper mechanism, which contains the tape and transported to the next position positively
the gear motor with chain, the sprocket wheels and the chain guide
cross conveyor belt, comprising;
-two cassette courses, one of them as work provided
-the steel construction incl. foot plates and anchors, placed directly on the floor, suitable for the installation of the required mechanical parts
-the special gliders, as well as the lateral guide
-the querverschiebebalken as a driver for the cassettes
-the drive motor with the required drive elements
-the mechanical preparations for the load cells installation at the workplace
storage car, running such as paging railway
electrical control consisting of:
-the control panel with push buttons for all individual movements, including on/off button and emergency push button
-the position and control switches
-power and control supply
-firmly installed control cabinets with built-in control
-the necessary cables, as well as the internal wiring
the safety light barrier incl. mounting brackets, which perceives the person protection during cartridge movement
 
condition: used, the last maintenance was performed in 2017, shortly after it was mined professionally, so that it can be rebuilt at any time. the company which has degraded the plant could perform the installation.
available: available now
location: nuremberg CASSETTE FOR WAREHOUSE, ABOUT 1,539 CASSETTES, CASSETTE LENGTH 6, 50 M, 3, 000 KG/KASSTTE - USED -: PRICE ON REQUEST! MANUFACTURER: FEHR YEAR OF CONSTRUCTION: 2001 CASSETTES GES. 1,539 UNITS SPECIFICATION 1 ELECTRICALLY OPERATED DOUBLE TABLE LONG GOOD STACK MACHINE, AUTOMATICALLY CONTROLLED, FOR THE STORAGE AND RETRIEVAL OF FOR GOOD MATERIAL, WITH THE HELP OF CASSETTES TECHNICAL DATA: CAPACITY 2X3000KG BOTTOM LOAD TABLE POSITION ABOVE GROUND 700 MM TOP LOAD TABLE POSITION ABOVE GROUND 12110 MM ROOM HEIGHT 13'450 MM LIFTING SPEED 35 M / MIN TRAVEL SPEED 80 M / MIN PULL-OUT SPEED 85 M / MIN OPERATING VOLTAGE, THREE-PHASE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ 24 V DC CASSETTE TYPE INTERNAL DIMENSIONS (WXHXL) A 520 X 270 X 6500 MM TYPE B 520 X 520 X 6500 MM DEVICE PERFORMANCE AT 100% LOAD 46 DS / H ACCORDING TO FEM BASED ON UB-3000 9.851 PULL-OUT FORCE ON THE CASSETTE GRIPPER (20% OF THE PAYLOAD PLUS CARTRIDGE WEIGHT) CONTROL AUTOMATICALLY ARRANGED USING AN AUTOMATIC CONTROL OVER OPERATING TERMINAL, AT THE CAMP OFFICE 1. 1 DOUBLE-SIDED TRACK, LENGTH APPROX 29 M TO HANG UP ON THE CONCRETE FLOOR, CONSISTING OF: THE TWO RAILS OF A 55, WITH THE SHOCKS, COMPLETE WITH ATTACHMENT FITTINGS AND THE LIMIT STOPS. THE RAILS ARE WITH FADE-FREE SPECIAL GROUT UNDER POURED. 2. 1 LONGITUDINAL-POWER SUPPLY, LENGTH APPROX 29 M, CONSISTING OF: VAHLE PLASTIC CONDUCTOR LINE, WITH GUARD, COMPLETE WITH THE MOUNTING BRACKETS. 3. 1 LONG GOODS STACKING DEVICES, CONSISTING OF: CAMP 2 HEAD STRAPS WELDED DESIGN, WITH THE CHASSIS, THIS CONSISTING OF W&ATILDE;&CURREN;LZGE CONTROLLED FROM THE TWO ENGINES WITH SHAFT MOUNTED GEARBOXES BUILT-ON, AS WELL AS THE 4 - CRANE WHEELS, WITH LEADERSHIP ROLES, RUNNING LATERALLY ON THE ROAD, 2 COLUMNS IN WELDED BOX CONSTRUCTION, WITH THE GUIDES FOR THE LIFTERS FROM MATERIAL PERFORMED ST 52.3, SCREWED ON THE HEAD STRAPS, INCLUDING THE STIFFENING FRAME, AS WELL AS A LADDER OF DESCENT,. 1 PALLET TRUCK, CONSISTING OF: THE STEEL CONSTRUCTION WITH THE NECESSARY RUBBER BUFFERS FOR THE TWO H&ATILDE;&PARA;HENEND POSITIONS, THE ROLLER BEARING SUPPORT AND LEADERSHIP ROLES, THE DOUBLE CASSETTE TABLE WITH GLIDES, THE EXTRACTOR, THE CENTERING WITH SIDE GUARD RAILS TO COMPLETE THE BOX, COMPLETE WITH THE RUNNERS FOR THE GRIPPER, THE DRIVE MOTORS, SPROCKETS, SHAFTS, CHAINS AND ELECTRICAL INSTALLATION, CONTROLS THE HORIZONTAL, WHICH &ACIRC;&LAQUO;FACHBELEGT&ACIRC;&RAQUO;. AS A HOIST IS USED: 1 CONTROLLED ENGINE WITH INTERMEDIATE GEAR (DESIGNED ACCORDING TO FEM 3 M) AND DRUM INCLUDES CORDS AND BALL-BEARING PULLEYS; SECURITY 12, WITH DOUBLE-GROOVED ROPE DRUM, DUST-PROTECTED BEARINGS DRUM BEARING, ROPE PULLEYS CONDITIONS ACCORDING TO DIN 15020. 4. ELECTRICAL INSTALLATION, COMPRISING: -THE SPECIAL CABLES, INCLUDING ALL REQUIRED TERMINAL BOXES, CONNECTING CABLES FIXED INSTALLED ON THE DEVICE -THE FLEXIBLE POWER SUPPLY IN CABLE CATERPILLAR TO THE TRUCKS, -COMPLETELY WIRED CABINET INCL. CONTACTOR AND THE NECESSARY CONTROLS, THE MUSHROOM-HEAD PUSHBUTTON, WHICH SHUTS OFF THE MAIN CONTACTOR (RED MUSHROOM CAN BE ROTATED), SWITCH WITH PUSH BUTTON, KEY SWITCH -THE TWO KEY SELECTOR SWITCHES, WHICH ARE USED FOR THE PRE-SELECTION OF THE OPERATING MODES &ACIRC;&LAQUO;TIP OPERATION/AUTOMATIC MODE&ACIRC;&RAQUO;, THE LIMIT SWITCHES FOR THE LIMITATION OF THE LIFTING AND MOVING -THE RECIPROCAL LOCKING OF LIFTING AND SUSPENSION COMPARED TO THE AUSZIEHVOR&ACIRC;&NOT; -DIRECTION, THE LATERALLY MOUNTED CLAMPING WIRES TO THE CONTINUOUS CONTROL OF THE SPEED PROFILE -THE PROFILE CONTROL, WHICH MONITORS WHETHER THE SPACE BETWEEN THE SHELF AND DEVICE IS FREE, -THE OUTPUT FUSE, WHICH PREVENTS THAT CASSETTES IN A FREE SPACE BE OUTSOURCED, -EXCESS HEIGHT CONTROL, WHICH PREVENTS A TRAINING AND STORAGE OF HIGH-LOADED CARTRIDGES, -THE CONTROL OF TAPE POSITION ON THE TABLE, -THE FAULT INDICATOR IN THE CONTROL PANEL ON THE LIFT TRUCK, -THE OPERATING HOUR COUNTERS FOR DRIVING AND LIFTING MECHANISM DISPLACEMENT MEASURING SYSTEMS THE WEAR-FREE OPTICAL MEASURING SYSTEM GUARANTEES MAXIMUM SERVICE LIFE AND PRECISE WAY CAPTURE OF THE X - AND Y-COORDINATES. THE WAY CAPTURE OF THE TWO GRIPPER THROUGH THE ABSOLUTE VALUE ENCODER IS LOCATED IN THE MILLIMETRE RANGE. BOTH SYSTEMS DELIVER THE ABSOLUTELY CORRECT READINGS AGAIN EVEN AFTER A POWER FAILURE. THUS IT TAKES NO MOVEMENTS FOR REPOSITIONING AND THE DEVICE STARTS WORKING IMMEDIATELY WITHOUT DELAY. DRIVING BEHAVIOR DRIVING IN THE X AND Y AXES IS SUCH THAT AT THE MAXIMUM POSSIBLE SPEED INFINITELY VARIABLE OVER SHORT OR LONG DISTANCES OPTIMAL SPEED CURVES ARE DRIVEN. THE BEHAVIOR OF THE DEVICE DIMENSIONS AT VARIOUS DISTANCES IS TAKEN INTO ACCOUNT AND FLOWS AS A CONTROL VARIABLE WITH A. THE PENDULUM EFFECT IS COMPENSATED WITH COUNTERACT THE DRIVING CURVE CHARACTERISTICS, LEARNING FUNCTIONS THE COMPUTER SOFTWARE IS SO FORWARD-LOOKING THAT HARDLY A PARAMETERIZATION OF VARIOUS SIZES MUST BE DONE BY THE PROGRAMMER. THE SOFTWARE ADAPTATION TO DIFFERENT DESIGN TYPES OF DEVICE AND STORAGE COMPARTMENTS IS DONE THROUGH THE LEARNING AND SELF-LEARNING ONSITE. FOLLOWING LEARNING PROCESSES TAKE PLACE DURING COMMISSIONING ON SITE: -SELF-LEARNING OF THE XY-DRIVING BEHAVIOR -LEARNING OF THE GRIPPER BEHAVIOR -LEARNING THE TRANSFER AND RECORDING PLACES OF THE PERIPHERY SELF LEARNING THE TOPOLOGY OF ALL STORAGE COMPARTMENTS OF DIFFERENT ARRANGEMENT AND SIZES OPERATING MODES -JOG THE LONG GOOD STACKING DEVICE IN THE DIRECTION OF TRAVEL, THE TRUCK AND THE TWO PULL-OUT DEVICES CAN BE MOVED WITH THE CONTROL BUTTONS. -SEMI AUTOMATIC (AUTOMATIC START-UP), ARRANGED IN THE STATIONARY CUPBOARD. WITH THE HAND-HELD MICRO TERMINAL, VARIOUS MOVEMENTS ARE RUN SEPARATELY OR IN COMBINATION AUTOMATICALLY: -DRIVING HORIZONTAL VERTICAL LIFTING/LOWERING -PULL CASSETTE -SLIDE TAPE -POSITIONING IN FRONT OF THE NEAREST OPTION PC-CABINET FOR M FS CALCULATOR EXECUTION: WXHXD 600 X 1900 X 600 MM 4-FIELD 17 "MONITOR FIELD OF VISION PART OF FRONT DOOR FOR COMPUTER UNIT INTEGRATED KEYBOARD TRAY STORAGE COMPARTMENT WITH REMOVABLE RAILS SOCKET 100 MM (II) PERIPHERAL COMPONENTS, INCLUDING: 1 1 CAROUSEL KA-3000 GR GR FOR CASSETTES WITH RODS TECHNICAL DATA: CAPACITY/CAPACITY 3000 KG NUMBER OF PITCHES 4 CONVEYING SPEED ALONG 24 M / MIN CROSS CONVEYOR SPEED 40 M / MIN HEIGHT FROM TOP OF FLOOR 700 MM OPERATING VOLTAGE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ THE CARTRIDGE SPACE TRACKING VIA THE AUTOMATIC CONTROL. THE CAROUSEL CONSISTS IN PARTICULAR OF: OUTSOURCING TRAIN, CONSISTING OF: -THE STEEL FOOT PLATES AND ANCHORS, DIRECTLY ON THE GROUND TURNED OFF AND INTEGRATED INTO THE SHELF, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPEZIALGLEITEM, AS WELL AS THE LATERAL GUIDE -THE GRIPPER MECHANISM, WHICH CONTAINS THE TAPE AND TRANSPORTED TO THE NEXT POSITION POSITIVELY THE GEAR MOTOR WITH CHAIN, THE SPROCKET WHEELS AND THE CHAIN GUIDE CROSS CONVEYOR BELT, COMPRISING; -TWO CASSETTE COURSES, ONE OF THEM AS WORK PROVIDED -THE STEEL CONSTRUCTION INCL. FOOT PLATES AND ANCHORS, PLACED DIRECTLY ON THE FLOOR, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPECIAL GLIDERS, AS WELL AS THE LATERAL GUIDE -THE QUERVERSCHIEBEBALKEN AS A DRIVER FOR THE CASSETTES -THE DRIVE MOTOR WITH THE REQUIRED DRIVE ELEMENTS -THE MECHANICAL PREPARATIONS FOR THE LOAD CELLS INSTALLATION AT THE WORKPLACE STORAGE CAR, RUNNING SUCH AS PAGING RAILWAY ELECTRICAL CONTROL CONSISTING OF: -THE CONTROL PANEL WITH PUSH BUTTONS FOR ALL INDIVIDUAL MOVEMENTS, INCLUDING ON/OFF BUTTON AND EMERGENCY PUSH BUTTON -THE POSITION AND CONTROL SWITCHES -POWER AND CONTROL SUPPLY -FIRMLY INSTALLED CONTROL CABINETS WITH BUILT-IN CONTROL -THE NECESSARY CABLES, AS WELL AS THE INTERNAL WIRING THE SAFETY LIGHT BARRIER INCL. MOUNTING BRACKETS, WHICH PERCEIVES THE PERSON PROTECTION DURING CARTRIDGE MOVEMENT CONDITION: USED, THE LAST MAINTENANCE WAS PERFORMED IN 2017, SHORTLY AFTER IT WAS MINED PROFESSIONALLY, SO THAT IT CAN BE REBUILT AT ANY TIME. THE COMPANY WHICH HAS DEGRADED THE PLANT COULD PERFORM THE INSTALLATION. AVAILABLE: AVAILABLE NOW LOCATION: NUREMBERG
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-amtec flowwrap f180-l60g - 2 rotary knives - guiding device<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 350mm | 2 rotating knives | 220v, 2.6kw | no compressed air required | max. speed of the machine in neutral: 180 cycles/min | max. bag (not product) dimensions (mm): l((90-220)or(150-330))xw(50-160)xh(0-60) | machine dimensions (mm): l4020xw770xh1450 | weight (net/gross): 850/900kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F180-L60G - 2 ROTARY KNIVES - GUIDING DEVICE

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 350MM | 2 ROTATING KNIVES | 220V, 2.6KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 180 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L((90-220)OR(150-330))XW(50-160)XH(0-60) | MACHINE DIMENSIONS (MM): L4020XW770XH1450 | WEIGHT (NET/GROSS): 850/900KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-labeler sidel alfa rollquatro f 25 hot melt glue with auxiliaries
 
this alfa rollquatro labeler was installed in 2006 and it was operated time to time till 2014 total operating hours not exceeding 10 000 hours! rollquattro is a rotary wraparound labeler equipped with an ergonomically designed, robust and precise linear labeling station with place for two rolls of film labels. label is attached to bottle with two hot melt glue stripes. label platforms are teethed belt driven via single servo motor. this labeler has hh2 configuration which enables improved flexibility in handling bottles of different sizes and greater reliability for small bottles at very high speeds. labeler is still installed and powered and in good condition. machine comes with videojet label coding printer and metec label inspector.
 
manufacturer sidel alfa inc
labeler type: alfa rollquatro f25 12t/sr/hh2 s1/e1
gluing system hot glue stripes
manufacturing year 2006
capacity 42000 bph
carousel diameter 720 mm
number of labeling stations 18
bottle diameter 53 - 110 mm
pitch 126 mm
label min-max length 177 - 355 mm
electric power 36 kw
in jet coder videojet 1620
label inspector metec promecon 2000   LABELER SIDEL ALFA ROLLQUATRO F 25 HOT MELT GLUE WITH AUXILIARIES THIS ALFA ROLLQUATRO LABELER WAS INSTALLED IN 2006 AND IT WAS OPERATED TIME TO TIME TILL 2014 TOTAL OPERATING HOURS NOT EXCEEDING 10 000 HOURS! ROLLQUATTRO IS A ROTARY WRAPAROUND LABELER EQUIPPED WITH AN ERGONOMICALLY DESIGNED, ROBUST AND PRECISE LINEAR LABELING STATION WITH PLACE FOR TWO ROLLS OF FILM LABELS. LABEL IS ATTACHED TO BOTTLE WITH TWO HOT MELT GLUE STRIPES. LABEL PLATFORMS ARE TEETHED BELT DRIVEN VIA SINGLE SERVO MOTOR. THIS LABELER HAS HH2 CONFIGURATION WHICH ENABLES IMPROVED FLEXIBILITY IN HANDLING BOTTLES OF DIFFERENT SIZES AND GREATER RELIABILITY FOR SMALL BOTTLES AT VERY HIGH SPEEDS. LABELER IS STILL INSTALLED AND POWERED AND IN GOOD CONDITION. MACHINE COMES WITH VIDEOJET LABEL CODING PRINTER AND METEC LABEL INSPECTOR. MANUFACTURER SIDEL ALFA INC LABELER TYPE: ALFA ROLLQUATRO F25 12T/SR/HH2 S1/E1 GLUING SYSTEM HOT GLUE STRIPES MANUFACTURING YEAR 2006 CAPACITY 42000 BPH CAROUSEL DIAMETER 720 MM NUMBER OF LABELING STATIONS 18 BOTTLE DIAMETER 53 - 110 MM PITCH 126 MM LABEL MIN-MAX LENGTH 177 - 355 MM ELECTRIC POWER 36 KW IN JET CODER VIDEOJET 1620 LABEL INSPECTOR METEC PROMECON 2000
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec flowwrap f180-l40g - 2 rotary knives - guiding device<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 350mm | 2 rotating knives | 220v, 2.6kw | no compressed air required | max. speed of the machine in neutral: 180 cycles/min | max. bag (not product) dimensions (mm): l((65-190)or(120-280))xw(50-160)xh(0-40) | machine dimensions (mm): l4020xw770xh1450 | weight (net/gross): 850/900kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F180-L40G - 2 ROTARY KNIVES - GUIDING DEVICE

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 350MM | 2 ROTATING KNIVES | 220V, 2.6KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 180 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L((65-190)OR(120-280))XW(50-160)XH(0-40) | MACHINE DIMENSIONS (MM): L4020XW770XH1450 | WEIGHT (NET/GROSS): 850/900KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine demag dnc ii 175

this demag injection molding machine was a testing machine in a petrochemical factory and afterwards it served several years as a training machine in a local technical university. the machine is used in laboratory test production and training purposes only, not in actual production ever. we dismantled it in 2008 and took it to our warehouse where it is today. it looks to be in good condition.

technical description:
manufacturer: mannesmann demag kunstofftechnik, germany
type: m-type demag dnc ii 175
year: 1981 – very little used
screw diameter: 52 mm, 16d
clamping force: 1750kn
injection volume: 380 cm3
control: microprocessor control system
measurements: 6.6 x 1.5 x 2.2 m (lxwxh)
weight: 7.800 kg
condition: very good – operational
typical products: pipe fittings, house hold articles, technical products   INJECTION MOLDING MACHINE DEMAG DNC II 175 THIS DEMAG INJECTION MOLDING MACHINE WAS A TESTING MACHINE IN A PETROCHEMICAL FACTORY AND AFTERWARDS IT SERVED SEVERAL YEARS AS A TRAINING MACHINE IN A LOCAL TECHNICAL UNIVERSITY. THE MACHINE IS USED IN LABORATORY TEST PRODUCTION AND TRAINING PURPOSES ONLY, NOT IN ACTUAL PRODUCTION EVER. WE DISMANTLED IT IN 2008 AND TOOK IT TO OUR WAREHOUSE WHERE IT IS TODAY. IT LOOKS TO BE IN GOOD CONDITION. TECHNICAL DESCRIPTION: MANUFACTURER: MANNESMANN DEMAG KUNSTOFFTECHNIK, GERMANY TYPE: M-TYPE DEMAG DNC II 175 YEAR: 1981 – VERY LITTLE USED SCREW DIAMETER: 52 MM, 16D CLAMPING FORCE: 1750KN INJECTION VOLUME: 380 CM3 CONTROL: MICROPROCESSOR CONTROL SYSTEM MEASUREMENTS: 6.6 X 1.5 X 2.2 M (LXWXH) WEIGHT: 7.800 KG CONDITION: VERY GOOD – OPERATIONAL TYPICAL PRODUCTS: PIPE FITTINGS, HOUSE HOLD ARTICLES, TECHNICAL PRODUCTS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec flowwrap f230-m55 - 2 rotary knives<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, small products. infeed table with automatic transport through pushers into the machine. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 250mm | 2 rotating knives | 220v, 2.4kw | no compressed air required | max. speed of the machine in neutral: 230 cycles/min | max. bag (not product) dimensions (mm): l(90-220)xw(30-110)xh(0-55): machine dimensions (mm): l3770xw670xh1450 | weight (net/gross): 700/750kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F230-M55 - 2 ROTARY KNIVES

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, SMALL PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 250MM | 2 ROTATING KNIVES | 220V, 2.4KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 230 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(90-220)XW(30-110)XH(0-55): MACHINE DIMENSIONS (MM): L3770XW670XH1450 | WEIGHT (NET/GROSS): 700/750KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-pet compressor atelier francois ce68a 35 m3/h

this three stage intercooled high pressure compressor was build in year 2005 and it is till installed but operation was stopped in year 2014. this compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. there is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. single acting 2nd and 3rd stage, requiring few valves. smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. the delivery includes stainless steel 40 bar air dyer with integrated 1 micron filter, dew point alarm and bekomat drain system and vertical hot galvanized 40 bar air receiver and control cabinet with af pc control system.

technical data:
manufacturer atelier francois belgium
manufacturing year 2005
fad (free air delivery) 35 m3/min at 40 bar
compressor rotation speed 480 rpm
electric motor 355 kw   PET COMPRESSOR ATELIER FRANCOIS CE68A 35 M3/H THIS THREE STAGE INTERCOOLED HIGH PRESSURE COMPRESSOR WAS BUILD IN YEAR 2005 AND IT IS TILL INSTALLED BUT OPERATION WAS STOPPED IN YEAR 2014. THIS COMPRESSOR IS VERY SLOW SPEED AND IT HAS ONLY TWO CROSS-HEAD ASSEMBLIES, TWO CONNECTING RODS AND ASSOCIATED BEARINGS. THERE IS NO PISTON ROD PACKING ON 3RD STAGE, WHICH ELIMINATE SEALING AGAINST 40 BAR. SINGLE ACTING 2ND AND 3RD STAGE, REQUIRING FEW VALVES. SMALLER 2ND AND 3RD STAGES ARE HORIZONTAL POSITION TO OPTIMIZE THE PISTON RING LIFE. THE DELIVERY INCLUDES STAINLESS STEEL 40 BAR AIR DYER WITH INTEGRATED 1 MICRON FILTER, DEW POINT ALARM AND BEKOMAT DRAIN SYSTEM AND VERTICAL HOT GALVANIZED 40 BAR AIR RECEIVER AND CONTROL CABINET WITH AF PC CONTROL SYSTEM. TECHNICAL DATA: MANUFACTURER ATELIER FRANCOIS BELGIUM MANUFACTURING YEAR 2005 FAD (FREE AIR DELIVERY) 35 M3/MIN AT 40 BAR COMPRESSOR ROTATION SPEED 480 RPM ELECTRIC MOTOR 355 KW
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec flowwrap f230-m40 - 2 rotary knives<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, small products. infeed table with automatic transport through pushers into the machine. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 250mm | 2 rotating knives | 220v, 2.4kw | no compressed air required | max. speed of the machine in neutral: 230 cycles/min | max. bag (not product) dimensions (mm): l((65-190)or(120-280))xw(30-110)xh(0-40) | machine dimensions (mm): l3770xw670xh1450 | weight (net/gross): 700/750kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F230-M40 - 2 ROTARY KNIVES

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, SMALL PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 250MM | 2 ROTATING KNIVES | 220V, 2.4KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 230 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L((65-190)OR(120-280))XW(30-110)XH(0-40) | MACHINE DIMENSIONS (MM): L3770XW670XH1450 | WEIGHT (NET/GROSS): 700/750KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 8.900 €
Ubicación: Land-aztech is a leading manufacturer of industrial machinery on the polish and foreign markets. our company deals with sale of new and used machines, which are covered by 12 months warranty, as well as a service after the warranty period.  in our offer you will find also spare parts for machines.
hammer crusher with horizontal effect of a number of highly effective, we can produce not big dimensions even 25 tonnes per hour (other versions up to 200 tons per hour). it is a machine for crushing of medium and fine grains. its maximum load is 300 mm (other versions up to 1000 mm), allowing the possibility to obtain a finished product with a grit that is adapted to your needs thanks to the movable rack (in the form of a thick from 0.5 mm up to 50 mm to the outlet sieve) at the material outlet. the crusher is used to chop up hard, medium-hard and soft raw materials with low moisture content, such as: limestone, granite, asphalt, charcoal, coal e, stone, concrete, brick, ceramic tiles, aluminium.                                                                                                                                                  we have different kinds of new, never used hammer crushers with different capacities and capabilities in continuous sale.
model - km/po/e-400 x 600 net price: â?¬8.900,00
the most important features: hammers and side walls are made of durable manganese-steel manufactured.
the dimensions of the bottom sieve can be adjusted according to the product group.

admission: 400 x 600 mm
load size (mm) - up to 550
finished product (mm) - 0.5-50
capacity (t / st) - up to 15
motor (kw) - 18.5
weight (kg) - 1700
note:
1. the specified yield refers to a material with a density of 1000 kg / m3.
2. our products are constantly updated and improved, az tech sp. z o.o. reserves the right to, parameters and design without prior notification of the user; 
3. the above product configuration is not a default configuration. at the time of purchase, request a detailed consultation.
we invite you to familiarize yourself with our offer and to visit our outlet in the province of province.
if no machines are in our offer, whose technical parameters match your requirements, using create and we make them happy for you.
machines are usually immediately ex stock available or available within a few weeks. we produce the most popular models ever.
we invite you to contact us.
your conversation partner tel: 570 884 633

AZTECH IS A LEADING MANUFACTURER OF INDUSTRIAL MACHINERY ON THE POLISH AND FOREIGN MARKETS. OUR COMPANY DEALS WITH SALE OF NEW AND USED MACHINES, WHICH ARE COVERED BY 12 MONTHS WARRANTY, AS WELL AS A SERVICE AFTER THE WARRANTY PERIOD. IN OUR OFFER YOU WILL FIND ALSO SPARE PARTS FOR MACHINES. HAMMER CRUSHER WITH HORIZONTAL EFFECT OF A NUMBER OF HIGHLY EFFECTIVE, WE CAN PRODUCE NOT BIG DIMENSIONS EVEN 25 TONNES PER HOUR (OTHER VERSIONS UP TO 200 TONS PER HOUR). IT IS A MACHINE FOR CRUSHING OF MEDIUM AND FINE GRAINS. ITS MAXIMUM LOAD IS 300 MM (OTHER VERSIONS UP TO 1000 MM), ALLOWING THE POSSIBILITY TO OBTAIN A FINISHED PRODUCT WITH A GRIT THAT IS ADAPTED TO YOUR NEEDS THANKS TO THE MOVABLE RACK (IN THE FORM OF A THICK FROM 0.5 MM UP TO 50 MM TO THE OUTLET SIEVE) AT THE MATERIAL OUTLET. THE CRUSHER IS USED TO CHOP UP HARD, MEDIUM-HARD AND SOFT RAW MATERIALS WITH LOW MOISTURE CONTENT, SUCH AS: LIMESTONE, GRANITE, ASPHALT, CHARCOAL, COAL E, STONE, CONCRETE, BRICK, CERAMIC TILES, ALUMINIUM. WE HAVE DIFFERENT KINDS OF NEW, NEVER USED HAMMER CRUSHERS WITH DIFFERENT CAPACITIES AND CAPABILITIES IN CONTINUOUS SALE. MODEL - KM/PO/E-400 X 600 NET PRICE: &ACIRC;?&NOT;8.900,00 THE MOST IMPORTANT FEATURES: HAMMERS AND SIDE WALLS ARE MADE OF DURABLE MANGANESE-STEEL MANUFACTURED. THE DIMENSIONS OF THE BOTTOM SIEVE CAN BE ADJUSTED ACCORDING TO THE PRODUCT GROUP. ADMISSION: 400 X 600 MM LOAD SIZE (MM) - UP TO 550 FINISHED PRODUCT (MM) - 0.5-50 CAPACITY (T / ST) - UP TO 15 MOTOR (KW) - 18.5 WEIGHT (KG) - 1700 NOTE: 1. THE SPECIFIED YIELD REFERS TO A MATERIAL WITH A DENSITY OF 1000 KG / M3. 2. OUR PRODUCTS ARE CONSTANTLY UPDATED AND IMPROVED, AZ TECH SP. Z O.O. RESERVES THE RIGHT TO, PARAMETERS AND DESIGN WITHOUT PRIOR NOTIFICATION OF THE USER; 3. THE ABOVE PRODUCT CONFIGURATION IS NOT A DEFAULT CONFIGURATION. AT THE TIME OF PURCHASE, REQUEST A DETAILED CONSULTATION. WE INVITE YOU TO FAMILIARIZE YOURSELF WITH OUR OFFER AND TO VISIT OUR OUTLET IN THE PROVINCE OF PROVINCE. IF NO MACHINES ARE IN OUR OFFER, WHOSE TECHNICAL PARAMETERS MATCH YOUR REQUIREMENTS, USING CREATE AND WE MAKE THEM HAPPY FOR YOU. MACHINES ARE USUALLY IMMEDIATELY EX STOCK AVAILABLE OR AVAILABLE WITHIN A FEW WEEKS. WE PRODUCE THE MOST POPULAR MODELS EVER. WE INVITE YOU TO CONTACT US. YOUR CONVERSATION PARTNER TEL: 570 884 633
Vendedor: Frau Iwona Wo?kowicz
Año de construcción: usado
Ubicación: Land-amtec flowwrap f330-s35 - 3 rotary knives<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, small products. infeed table with automatic transport through pushers into the machine. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 180mm | 3 rotating knives | 220v, 2.4kw | no compressed air required | max. speed of the machine in neutral: 330 cycles/min | max. bag (not product) dimensions (mm): l(50-115)xw(30-80)xh(0-35) | machine dimensions (mm): l3770xw670xh1450 | weight (net/gross): 700/750kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F330-S35 - 3 ROTARY KNIVES

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, SMALL PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 180MM | 3 ROTATING KNIVES | 220V, 2.4KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 330 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(50-115)XW(30-80)XH(0-35) | MACHINE DIMENSIONS (MM): L3770XW670XH1450 | WEIGHT (NET/GROSS): 700/750KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 8.900 €
Ubicación: Land-aztech is a leading manufacturer of industrial machinery on the polish and foreign markets. our company deals with sale of new and used machines, which are covered by 12 months warranty, as well as a service after the warranty period.  in our offer you will find also spare parts for machines.
hammer crusher with horizontal effect of a number of highly effective, we can produce not big dimensions even 25 tonnes per hour (other versions up to 200 tons per hour). it is a machine for crushing of medium and fine grains. its maximum load is 300 mm (other versions up to 1000 mm), allowing the possibility to obtain a finished product with a grit that is adapted to your needs thanks to the movable rack (in the form of a thick from 0.5 mm up to 50 mm to the outlet sieve) at the material outlet. the crusher is used to chop up hard, medium-hard and soft raw materials with low moisture content, such as: limestone, granite, asphalt, charcoal, coal e, stone, concrete, brick, ceramic tiles, aluminium.                                                                                                                                                  we have different kinds of new, never used hammer crushers with different capacities and capabilities in continuous sale.
model - km/po/e-400 x 600 net price: â?¬8.900,00
the most important features: hammers and side walls are made of durable manganese-steel manufactured.
the dimensions of the bottom sieve can be adjusted according to the product group.

admission: 400 x 600 mm
load size (mm) - up to 550
finished product (mm) - 0.5-50
capacity (t / st) - up to 15
motor (kw) - 18.5
weight (kg) - 1700
note:
1. the specified yield refers to a material with a density of 1000 kg / m3.
2. our products are constantly updated and improved, az tech sp. z o.o. reserves the right to, parameters and design without prior notification of the user; 
3. the above product configuration is not a default configuration. at the time of purchase, request a detailed consultation.
we invite you to familiarize yourself with our offer and to visit our outlet in the province of province.
if no machines are in our offer, whose technical parameters match your requirements, using create and we make them happy for you.
machines are usually immediately ex stock available or available within a few weeks. we produce the most popular models ever.
we invite you to contact us.
your conversation partner tel: 570 884 633

AZTECH IS A LEADING MANUFACTURER OF INDUSTRIAL MACHINERY ON THE POLISH AND FOREIGN MARKETS. OUR COMPANY DEALS WITH SALE OF NEW AND USED MACHINES, WHICH ARE COVERED BY 12 MONTHS WARRANTY, AS WELL AS A SERVICE AFTER THE WARRANTY PERIOD. IN OUR OFFER YOU WILL FIND ALSO SPARE PARTS FOR MACHINES. HAMMER CRUSHER WITH HORIZONTAL EFFECT OF A NUMBER OF HIGHLY EFFECTIVE, WE CAN PRODUCE NOT BIG DIMENSIONS EVEN 25 TONNES PER HOUR (OTHER VERSIONS UP TO 200 TONS PER HOUR). IT IS A MACHINE FOR CRUSHING OF MEDIUM AND FINE GRAINS. ITS MAXIMUM LOAD IS 300 MM (OTHER VERSIONS UP TO 1000 MM), ALLOWING THE POSSIBILITY TO OBTAIN A FINISHED PRODUCT WITH A GRIT THAT IS ADAPTED TO YOUR NEEDS THANKS TO THE MOVABLE RACK (IN THE FORM OF A THICK FROM 0.5 MM UP TO 50 MM TO THE OUTLET SIEVE) AT THE MATERIAL OUTLET. THE CRUSHER IS USED TO CHOP UP HARD, MEDIUM-HARD AND SOFT RAW MATERIALS WITH LOW MOISTURE CONTENT, SUCH AS: LIMESTONE, GRANITE, ASPHALT, CHARCOAL, COAL E, STONE, CONCRETE, BRICK, CERAMIC TILES, ALUMINIUM. WE HAVE DIFFERENT KINDS OF NEW, NEVER USED HAMMER CRUSHERS WITH DIFFERENT CAPACITIES AND CAPABILITIES IN CONTINUOUS SALE. MODEL - KM/PO/E-400 X 600 NET PRICE: &ACIRC;?&NOT;8.900,00 THE MOST IMPORTANT FEATURES: HAMMERS AND SIDE WALLS ARE MADE OF DURABLE MANGANESE-STEEL MANUFACTURED. THE DIMENSIONS OF THE BOTTOM SIEVE CAN BE ADJUSTED ACCORDING TO THE PRODUCT GROUP. ADMISSION: 400 X 600 MM LOAD SIZE (MM) - UP TO 550 FINISHED PRODUCT (MM) - 0.5-50 CAPACITY (T / ST) - UP TO 15 MOTOR (KW) - 18.5 WEIGHT (KG) - 1700 NOTE: 1. THE SPECIFIED YIELD REFERS TO A MATERIAL WITH A DENSITY OF 1000 KG / M3. 2. OUR PRODUCTS ARE CONSTANTLY UPDATED AND IMPROVED, AZ TECH SP. Z O.O. RESERVES THE RIGHT TO, PARAMETERS AND DESIGN WITHOUT PRIOR NOTIFICATION OF THE USER; 3. THE ABOVE PRODUCT CONFIGURATION IS NOT A DEFAULT CONFIGURATION. AT THE TIME OF PURCHASE, REQUEST A DETAILED CONSULTATION. WE INVITE YOU TO FAMILIARIZE YOURSELF WITH OUR OFFER AND TO VISIT OUR OUTLET IN THE PROVINCE OF PROVINCE. IF NO MACHINES ARE IN OUR OFFER, WHOSE TECHNICAL PARAMETERS MATCH YOUR REQUIREMENTS, USING CREATE AND WE MAKE THEM HAPPY FOR YOU. MACHINES ARE USUALLY IMMEDIATELY EX STOCK AVAILABLE OR AVAILABLE WITHIN A FEW WEEKS. WE PRODUCE THE MOST POPULAR MODELS EVER. WE INVITE YOU TO CONTACT US. YOUR CONVERSATION PARTNER TEL: 570 884 633
Vendedor: Frau Iwona Wo?kowicz
Año de construcción: usado
Ubicación: Land-amtec flowwrap f330-s35 - 4 rotary knives<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, small products. infeed table with automatic transport through pushers into the machine. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 180mm | 4 rotating knives | 220v, 2.4kw | no compressed air required | max. speed of the machine in neutral: 330 cycles/min | max. bag (not product) dimensions (mm): l(45-90)xw(30-80)xh(0-35) | machine dimensions (mm): l3770xw670xh1450 | weight (net/gross): 700/750kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F330-S35 - 4 ROTARY KNIVES

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, SMALL PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 180MM | 4 ROTATING KNIVES | 220V, 2.4KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 330 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(45-90)XW(30-80)XH(0-35) | MACHINE DIMENSIONS (MM): L3770XW670XH1450 | WEIGHT (NET/GROSS): 700/750KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-miter bandsaw behringer

hbp 263 g-type

year of manufacture 2004

cutting diameter: 260 mm

blade length: 4640 mm

cutting width: 400 x 260 mm

material height: 800 mm

band saw blade dimensions: 4640 x 34 x 1,1 mm

miter cuts / + degree :-30 + 60 â° c

cutting speed: 20-140 m / min

power: 4,0 kw

microschmiereinrichtung

machine weight approx.: 1.5 t

mechanical length stop with roller conveyor 4 m

feed roller 6 m
the offer is aimed exclusively at professionals in the sense of ⧠14bgb
no sales to private! MITER BANDSAW BEHRINGER HBP 263 G-TYPE YEAR OF MANUFACTURE 2004 CUTTING DIAMETER: 260 MM BLADE LENGTH: 4640 MM CUTTING WIDTH: 400 X 260 MM MATERIAL HEIGHT: 800 MM BAND SAW BLADE DIMENSIONS: 4640 X 34 X 1,1 MM MITER CUTS / + DEGREE :-30 + 60 &ACIRC;&DEG; C CUTTING SPEED: 20-140 M / MIN POWER: 4,0 KW MICROSCHMIEREINRICHTUNG MACHINE WEIGHT APPROX.: 1.5 T MECHANICAL LENGTH STOP WITH ROLLER CONVEYOR 4 M FEED ROLLER 6 M THE OFFER IS AIMED EXCLUSIVELY AT PROFESSIONALS IN THE SENSE OF &ACIRC;&SECT; 14BGB NO SALES TO PRIVATE!
Vendedor: Jens Kürschner Maschinenhandel
Año de construcción: usado
Ubicación: Land-amtec fillingsystem - sample system for tablet counting and filling<br><br>sample system for capsule and tablet counting and filling. the system includes a vibration and multi channel feeder, plc control system, dynamic scan counting, bottle/can transfer unit. <br><br>- specifications: range of counting 20-999 pcs | counting and filling speed: max. 4000 tablets/min | final output: 50-100 bottles/cans per minute | max. product diameter: 13mm | max. product length/thickness: 6mm | typical bottles sizes: diameter 45-60mm, height 50-100mm | 380v, 1.2kw. please note: this is a sample system only. the final specifications will vary. - please let us know your product datails (product size and shape, required speed , working stations, etc.) to prepare a suitable quotation for you.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FILLINGSYSTEM - SAMPLE SYSTEM FOR TABLET COUNTING AND FILLING

SAMPLE SYSTEM FOR CAPSULE AND TABLET COUNTING AND FILLING. THE SYSTEM INCLUDES A VIBRATION AND MULTI CHANNEL FEEDER, PLC CONTROL SYSTEM, DYNAMIC SCAN COUNTING, BOTTLE/CAN TRANSFER UNIT.

- SPECIFICATIONS: RANGE OF COUNTING 20-999 PCS | COUNTING AND FILLING SPEED: MAX. 4000 TABLETS/MIN | FINAL OUTPUT: 50-100 BOTTLES/CANS PER MINUTE | MAX. PRODUCT DIAMETER: 13MM | MAX. PRODUCT LENGTH/THICKNESS: 6MM | TYPICAL BOTTLES SIZES: DIAMETER 45-60MM, HEIGHT 50-100MM | 380V, 1.2KW. PLEASE NOTE: THIS IS A SAMPLE SYSTEM ONLY. THE FINAL SPECIFICATIONS WILL VARY. - PLEASE LET US KNOW YOUR PRODUCT DATAILS (PRODUCT SIZE AND SHAPE, REQUIRED SPEED , WORKING STATIONS, ETC.) TO PREPARE A SUITABLE QUOTATION FOR YOU.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 30.000 €
Ubicación: Land-box washer is designed for semi-automatic washing kistenów and wooden containers, standard. the use of washers in the process helps to reduce the consumption of water, detergent and energy. once the toll is one case has, the process consists of successive stages automatically washing and rinsing.
high performance and power washing, in conjunction with a professional detergent washing guarantee receipt of the highest quality cleaning items in the continuous washing system with closed circuit washing and rinsing, and technological transfer. thanks to the use of high-pressure fans and to optimize the construction of drying tunnel, it is possible to achieve best drying effects in continuous movement. using additional regulation of flows it is possible to economical setting machines for minimize the consumption of water, energy and detergents.   BOX WASHER IS DESIGNED FOR SEMI-AUTOMATIC WASHING KISTENóW AND WOODEN CONTAINERS, STANDARD. THE USE OF WASHERS IN THE PROCESS HELPS TO REDUCE THE CONSUMPTION OF WATER, DETERGENT AND ENERGY. ONCE THE TOLL IS ONE CASE HAS, THE PROCESS CONSISTS OF SUCCESSIVE STAGES AUTOMATICALLY WASHING AND RINSING. HIGH PERFORMANCE AND POWER WASHING, IN CONJUNCTION WITH A PROFESSIONAL DETERGENT WASHING GUARANTEE RECEIPT OF THE HIGHEST QUALITY CLEANING ITEMS IN THE CONTINUOUS WASHING SYSTEM WITH CLOSED CIRCUIT WASHING AND RINSING, AND TECHNOLOGICAL TRANSFER. THANKS TO THE USE OF HIGH-PRESSURE FANS AND TO OPTIMIZE THE CONSTRUCTION OF DRYING TUNNEL, IT IS POSSIBLE TO ACHIEVE BEST DRYING EFFECTS IN CONTINUOUS MOVEMENT. USING ADDITIONAL REGULATION OF FLOWS IT IS POSSIBLE TO ECONOMICAL SETTING MACHINES FOR MINIMIZE THE CONSUMPTION OF WATER, ENERGY AND DETERGENTS.
Vendedor: Machine-For-Sale.com
Año de construcción: usado
Ubicación: Land-amtec vertiwrap weigher double belt weighing system for large 1-50kg packs<br><br>double-belt weighing system for large volumes of 1-50kg of loose materials as bio-pharmaceuticals, food, farm chemical and fertilizer, building materials, ceramcis, chemicals, drug ingredients, seeds, cereals, charcoal, flow soil, plastic grains, etc. <br><br>- specifications: 65 liter hopper | all product contacting parts in stainless steel (ss340) | frame in mild steel with painted surface | accuracy (depending on product): 0,5-1,0% | pre-set-option for 10 programs | max. speed of the machine in neutral: 15 cycles/minute.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP WEIGHER DOUBLE BELT WEIGHING SYSTEM FOR LARGE 1-50KG PACKS

DOUBLE-BELT WEIGHING SYSTEM FOR LARGE VOLUMES OF 1-50KG OF LOOSE MATERIALS AS BIO-PHARMACEUTICALS, FOOD, FARM CHEMICAL AND FERTILIZER, BUILDING MATERIALS, CERAMCIS, CHEMICALS, DRUG INGREDIENTS, SEEDS, CEREALS, CHARCOAL, FLOW SOIL, PLASTIC GRAINS, ETC.

- SPECIFICATIONS: 65 LITER HOPPER | ALL PRODUCT CONTACTING PARTS IN STAINLESS STEEL (SS340) | FRAME IN MILD STEEL WITH PAINTED SURFACE | ACCURACY (DEPENDING ON PRODUCT): 0,5-1,0% | PRE-SET-OPTION FOR 10 PROGRAMS | MAX. SPEED OF THE MACHINE IN NEUTRAL: 15 CYCLES/MINUTE.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-control heidenhain type tnc355, travels x / y / z 710 x 500 x 400 mm, tool holder type sk40
de:
cnc-universal-fräsmaschine, fabr. micron, typ wf510/tnc355, ser.-nr. 5511905, steuerung, fabr. heidenhain, typ tnc355, verfahrwege x/y/z 710 x 500 x 400 mm, werkzeugaufnahme, typ sk4
 CONTROL HEIDENHAIN TYPE TNC355, TRAVELS X / Y / Z 710 X 500 X 400 MM, TOOL HOLDER TYPE SK40 DE: CNC-UNIVERSAL-FRäSMASCHINE, FABR. MICRON, TYP WF510/TNC355, SER.-NR. 5511905, STEUERUNG, FABR. HEIDENHAIN, TYP TNC355, VERFAHRWEGE X/Y/Z 710 X 500 X 400 MM, WERKZEUGAUFNAHME, TYP SK4
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-amtec shrink wrapper flowshrink w100-l high speed pro-version<br><br>flowshrink machine for high-speed packaging of products in a special range of product sizes. double drive longitudinal sealer system ensures firm and smooth longitudinal sealing. blade position adjusting on power-off function. servo drive system ensures precise and stable performance. very economic alternative to side sealing systems when less flexible product sizes are used. <br><br>- specifications: packaging sizes: l(100-300)xw(30-100)xh(2-100)mm | sealing bar width: 230mm | max. speed of the machine in neutral: 100 cycles/minute | power: 220v, 3.75kw | infeed length: 3000mm | machine dimensions: l5050xw1190xh1650mm | weight: 1020kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINK WRAPPER FLOWSHRINK W100-L HIGH SPEED PRO-VERSION

FLOWSHRINK MACHINE FOR HIGH-SPEED PACKAGING OF PRODUCTS IN A SPECIAL RANGE OF PRODUCT SIZES. DOUBLE DRIVE LONGITUDINAL SEALER SYSTEM ENSURES FIRM AND SMOOTH LONGITUDINAL SEALING. BLADE POSITION ADJUSTING ON POWER-OFF FUNCTION. SERVO DRIVE SYSTEM ENSURES PRECISE AND STABLE PERFORMANCE. VERY ECONOMIC ALTERNATIVE TO SIDE SEALING SYSTEMS WHEN LESS FLEXIBLE PRODUCT SIZES ARE USED.

- SPECIFICATIONS: PACKAGING SIZES: L(100-300)XW(30-100)XH(2-100)MM | SEALING BAR WIDTH: 230MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 100 CYCLES/MINUTE | POWER: 220V, 3.75KW | INFEED LENGTH: 3000MM | MACHINE DIMENSIONS: L5050XW1190XH1650MM | WEIGHT: 1020KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-keg filling unit for 5 liter party - keg, semiautomatic esau hueber 110 kph
 
this keg filler is semiautomatic with 3 filling heads, handtmann mms micro filtration system and cap closing unit manufactured in 2007 and hardy used and it was dismantled in year 2012 - the equipment was in excellent condition when dismantled professionally and placed in a container. the line has filling capacity of 110 kegs / hour. the empty and clean keg is placed manually onto filler and lifted manually back to the transport belt once filled. the sensor recognizes placed keg and starts filling automatically, a probe sensor in return air channel controls the filling level. the equipment purges kegs with co2 for air removal and them pressurizes the keg. the beer valve and return valve are opened simultaneously and the keg will be filled from bottom to top. once filled, the kegs will moved to closing unit and further along the transport belt ready for packaging. beer filling system includes micro filtration system for for high efficiency separation of particles and microorganism by multi-layer filter sheets made of cellulose and diatomaceous.
 
manufacturer: esau & hueber gmbh, germany
made in year: 2007
capacity: 110 pieces of 5 litres kegs / hour
filling unit: esau & hueber semi-fill with 3 filling heads
cap closing unit: esau & hueber ser semiautomatic
beer filtration: handtmann mms 070 - capacity 30 hl / h
control system: siemens simatic s7-300   KEG FILLING UNIT FOR 5 LITER PARTY - KEG, SEMIAUTOMATIC ESAU HUEBER 110 KPH THIS KEG FILLER IS SEMIAUTOMATIC WITH 3 FILLING HEADS, HANDTMANN MMS MICRO FILTRATION SYSTEM AND CAP CLOSING UNIT MANUFACTURED IN 2007 AND HARDY USED AND IT WAS DISMANTLED IN YEAR 2012 - THE EQUIPMENT WAS IN EXCELLENT CONDITION WHEN DISMANTLED PROFESSIONALLY AND PLACED IN A CONTAINER. THE LINE HAS FILLING CAPACITY OF 110 KEGS / HOUR. THE EMPTY AND CLEAN KEG IS PLACED MANUALLY ONTO FILLER AND LIFTED MANUALLY BACK TO THE TRANSPORT BELT ONCE FILLED. THE SENSOR RECOGNIZES PLACED KEG AND STARTS FILLING AUTOMATICALLY, A PROBE SENSOR IN RETURN AIR CHANNEL CONTROLS THE FILLING LEVEL. THE EQUIPMENT PURGES KEGS WITH CO2 FOR AIR REMOVAL AND THEM PRESSURIZES THE KEG. THE BEER VALVE AND RETURN VALVE ARE OPENED SIMULTANEOUSLY AND THE KEG WILL BE FILLED FROM BOTTOM TO TOP. ONCE FILLED, THE KEGS WILL MOVED TO CLOSING UNIT AND FURTHER ALONG THE TRANSPORT BELT READY FOR PACKAGING. BEER FILLING SYSTEM INCLUDES MICRO FILTRATION SYSTEM FOR FOR HIGH EFFICIENCY SEPARATION OF PARTICLES AND MICROORGANISM BY MULTI-LAYER FILTER SHEETS MADE OF CELLULOSE AND DIATOMACEOUS. MANUFACTURER: ESAU & HUEBER GMBH, GERMANY MADE IN YEAR: 2007 CAPACITY: 110 PIECES OF 5 LITRES KEGS / HOUR FILLING UNIT: ESAU & HUEBER SEMI-FILL WITH 3 FILLING HEADS CAP CLOSING UNIT: ESAU & HUEBER SER SEMIAUTOMATIC BEER FILTRATION: HANDTMANN MMS 070 - CAPACITY 30 HL / H CONTROL SYSTEM: SIEMENS SIMATIC S7-300
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec fillingmachine fully automatic linear weigher 10-2000g<br><br>automatic weighing unit for granulate like products (chemicals, food, sugar, coffe, detergents, etc.) into bottles, cans or similar. including hopper, vibrating feeder, weighing unit, housing to minimize dust, rack and conveyor. <br><br>- specifications: stainless steel version (ss304) | 2 head weigher each with weighing range of 10-2000g | accuracy: less than +/-1g (depending on product) | max. speed of the machine in neutral: 40 cycles/minute | hopper volume: 20 liter | power: 220v, 0.5kw | machine dimensions (incl. conveyor): l870xw830xh2100mm | weight: 180kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FILLINGMACHINE FULLY AUTOMATIC LINEAR WEIGHER 10-2000G

AUTOMATIC WEIGHING UNIT FOR GRANULATE LIKE PRODUCTS (CHEMICALS, FOOD, SUGAR, COFFE, DETERGENTS, ETC.) INTO BOTTLES, CANS OR SIMILAR. INCLUDING HOPPER, VIBRATING FEEDER, WEIGHING UNIT, HOUSING TO MINIMIZE DUST, RACK AND CONVEYOR.

- SPECIFICATIONS: STAINLESS STEEL VERSION (SS304) | 2 HEAD WEIGHER EACH WITH WEIGHING RANGE OF 10-2000G | ACCURACY: LESS THAN +/-1G (DEPENDING ON PRODUCT) | MAX. SPEED OF THE MACHINE IN NEUTRAL: 40 CYCLES/MINUTE | HOPPER VOLUME: 20 LITER | POWER: 220V, 0.5KW | MACHINE DIMENSIONS (INCL. CONVEYOR): L870XW830XH2100MM | WEIGHT: 180KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MIC types: