67 ofertas

Año de construcción: usado
Ubicación: Land-holac

type: aut 30 he

efficiency up to 2800 kg/h

installed power: 7.5 kw

one cutting set:

integrated loader  HOLAC TYPE: AUT 30 HE EFFICIENCY UP TO 2800 KG/H INSTALLED POWER: 7.5 KW ONE CUTTING SET: INTEGRATED LOADER
Vendedor: BmgTrade
Año de construcción: usado
Precio: 850 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-shop wolf / table wolf

mado

technical data:

type: primus / mew 603 d
    5.4/3.2 a / 1.45 kw / 50 hz, 230/380 volt / 2700 rpm
    ejector housing & nut stainless steel
    screw stainless steel
    stainless steel housing
    3-tlg. unger cutting system
    performance: approx. 350 kg / hour
    bowl volume: 6 liters
    machine new stored & new belt
    function checked, device is ready to plug & immediately ready for use!

the grinder works fine, see pictures original condition!  SHOP WOLF / TABLE WOLF MADO TECHNICAL DATA: TYPE: PRIMUS / MEW 603 D 5.4/3.2 A / 1.45 KW / 50 HZ, 230/380 VOLT / 2700 RPM EJECTOR HOUSING & NUT STAINLESS STEEL SCREW STAINLESS STEEL STAINLESS STEEL HOUSING 3-TLG. UNGER CUTTING SYSTEM PERFORMANCE: APPROX. 350 KG / HOUR BOWL VOLUME: 6 LITERS MACHINE NEW STORED & NEW BELT FUNCTION CHECKED, DEVICE IS READY TO PLUG & IMMEDIATELY READY FOR USE! THE GRINDER WORKS FINE, SEE PICTURES ORIGINAL CONDITION!
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Precio: 900 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land--diameter: 200 mm
-loader of bins europe

-power: 39 kw -DIAMETER: 200 MM -LOADER OF BINS EUROPE -POWER: 39 KW
Vendedor: Europ-Equipement
Año de construcción: usado
Ubicación: Land--diameter 130 mm
-parallel feeder screw  -DIAMETER 130 MM -PARALLEL FEEDER SCREW
Vendedor: Europ-Equipement
Año de construcción: usado
Precio: 850 €
Ubicación: Land-d meat grinder

nagema

type: d-114

technical data:

380 v / 50 hz / 16 a cee plug
    disk diameter 114 mm
    1 screw speed
    with schneckenausstoã?er
    blade unger set 5 pieces
    see accessories original images!
    transmission rate: 800 kg / h
    machine weight: 300 kg
    dimensions h/w/d: of 102 x 㸠65 cm total
    rugged & durable machine
    function tested machine ready for use immediately,

see state original images!

if you have questions call or email. D MEAT GRINDER NAGEMA TYPE: D-114 TECHNICAL DATA: 380 V / 50 HZ / 16 A CEE PLUG DISK DIAMETER 114 MM 1 SCREW SPEED WITH SCHNECKENAUSSTO�ER BLADE UNGER SET 5 PIECES SEE ACCESSORIES ORIGINAL IMAGES! TRANSMISSION RATE: 800 KG / H MACHINE WEIGHT: 300 KG DIMENSIONS H/W/D: OF 102 X ø 65 CM TOTAL RUGGED & DURABLE MACHINE FUNCTION TESTED MACHINE READY FOR USE IMMEDIATELY, SEE STATE ORIGINAL IMAGES! IF YOU HAVE QUESTIONS CALL OR EMAIL.
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Ubicación: Land-grinder 200 mm, all stainless steel, european bins charger.
39 kw power. perfect condition. GRINDER 200 MM, ALL STAINLESS STEEL, EUROPEAN BINS CHARGER. 39 KW POWER. PERFECT CONDITION.
Vendedor: Europ-Equipement
Año de construcción: usado
Precio: 1.350 €
Ubicación: Land-bizerba fw-n 82 mincer
originating from a kaiser's tengelmann supermarket
body completely in stainless steel
wolf intent ep22 completely in stainless steel (replaced by the previous owner apparently times)
engine is running video about test run orderly and quiet, available
machine should be thoroughly cleaned before use
a disc has already cracks between the holes

video about test run and more pictures available

BIZERBA FW-N 82 MINCER ORIGINATING FROM A KAISER'S TENGELMANN SUPERMARKET BODY COMPLETELY IN STAINLESS STEEL WOLF INTENT EP22 COMPLETELY IN STAINLESS STEEL (REPLACED BY THE PREVIOUS OWNER APPARENTLY TIMES) ENGINE IS RUNNING VIDEO ABOUT TEST RUN ORDERLY AND QUIET, AVAILABLE MACHINE SHOULD BE THOROUGHLY CLEANED BEFORE USE A DISC HAS ALREADY CRACKS BETWEEN THE HOLES VIDEO ABOUT TEST RUN AND MORE PICTURES AVAILABLE
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-meat grinder alexanderwerk hn 114,
housing in stainless steel, worm, and worm-drive housing cast.
connection 380v, 5, 5kw, dimensions lxwxh approx. 100x70x110cm, weight approx. 330kg.
very solid machine, also inside, outer ring the nut broken,.
machine works fine.
 MEAT GRINDER ALEXANDERWERK HN 114, HOUSING IN STAINLESS STEEL, WORM, AND WORM-DRIVE HOUSING CAST. CONNECTION 380V, 5, 5KW, DIMENSIONS LXWXH APPROX. 100X70X110CM, WEIGHT APPROX. 330KG. VERY SOLID MACHINE, ALSO INSIDE, OUTER RING THE NUT BROKEN,. MACHINE WORKS FINE.
Vendedor: Lebensmitteltechnik Mayer
Año de construcción: usado
Precio: 1.300 €
Ubicación: Land-commercial washing machine miele, model: electronic ws 5508/1706050.
front made of stainless steel, on base, capacity 80l / 8kg, water dripping, must be examined.
ser. no.: 175
external dimension: 800 x 800 x 1300
elek. voltage: 380v, elek. capacity: 6.3-9.3
speed: 1000
weight: ca. 150kg.

more info? sign up!
greetings COMMERCIAL WASHING MACHINE MIELE, MODEL: ELECTRONIC WS 5508/1706050. FRONT MADE OF STAINLESS STEEL, ON BASE, CAPACITY 80L / 8KG, WATER DRIPPING, MUST BE EXAMINED. SER. NO.: 175 EXTERNAL DIMENSION: 800 X 800 X 1300 ELEK. VOLTAGE: 380V, ELEK. CAPACITY: 6.3-9.3 SPEED: 1000 WEIGHT: CA. 150KG. MORE INFO? SIGN UP! GREETINGS
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Precio: 4.610 €
Ubicación: Land-kilia d114 plug grinder used

housing, auger and auger housing made of stainless steel
guard before the outlet with end switch allows operation of discs with more than 7, 8 mm holes
5-piece unger d114 cutting kit
2 x auja d114 knife 4 flã¼glig with new blades
4 x new replacement blades in addition
clean machine with proper running
only the expression lever of screw is fixed, because this was never used
machine should be thoroughly cleaned despite of the well-kept condition prior to use

video about test run and more pictures available KILIA D114 PLUG GRINDER USED HOUSING, AUGER AND AUGER HOUSING MADE OF STAINLESS STEEL GUARD BEFORE THE OUTLET WITH END SWITCH ALLOWS OPERATION OF DISCS WITH MORE THAN 7, 8 MM HOLES 5-PIECE UNGER D114 CUTTING KIT 2 X AUJA D114 KNIFE 4 FLüGLIG WITH NEW BLADES 4 X NEW REPLACEMENT BLADES IN ADDITION CLEAN MACHINE WITH PROPER RUNNING ONLY THE EXPRESSION LEVER OF SCREW IS FIXED, BECAUSE THIS WAS NEVER USED MACHINE SHOULD BE THOROUGHLY CLEANED DESPITE OF THE WELL-KEPT CONDITION PRIOR TO USE VIDEO ABOUT TEST RUN AND MORE PICTURES AVAILABLE
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Precio: 1.200 €
Ubicación: Land-miele, g 7736 cd mcu / g 7736 c2.
digital control.
dimensions: 895x700x1150mm
internal dimensions: 530x515x520mm
elek. voltage: 380v
elek. power: 10.2kw.
condition: good!

for more, visit us at: 2hand4sale.de
greetings MIELE, G 7736 CD MCU / G 7736 C2. DIGITAL CONTROL. DIMENSIONS: 895X700X1150MM INTERNAL DIMENSIONS: 530X515X520MM ELEK. VOLTAGE: 380V ELEK. POWER: 10.2KW. CONDITION: GOOD! FOR MORE, VISIT US AT: 2HAND4SALE.DE GREETINGS
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-manufacturer: miele, model: g 7735;
with card programming.
dimensions: 900x700x850mm.
condition: good!

visit and for more devices see: 2hand4sale.de
greetings MANUFACTURER: MIELE, MODEL: G 7735; WITH CARD PROGRAMMING. DIMENSIONS: 900X700X850MM. CONDITION: GOOD! VISIT AND FOR MORE DEVICES SEE: 2HAND4SALE.DE GREETINGS
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Precio: 1.300 €
Ubicación: Land-miele, model: g 7735 c2 / g7735 cd mcu.
digital control.
dimensions: 895x700x820mm
internal dimensions: 540x520x510mm
elek. voltage: 380v, elek. performance: 8.8-9.7kw.
condition: good!

2hand4sale.de MIELE, MODEL: G 7735 C2 / G7735 CD MCU. DIGITAL CONTROL. DIMENSIONS: 895X700X820MM INTERNAL DIMENSIONS: 540X520X510MM ELEK. VOLTAGE: 380V, ELEK. PERFORMANCE: 8.8-9.7KW. CONDITION: GOOD! 2HAND4SALE.DE
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Precio: 1.050 €
Ubicación: Land-manufacturer: miele, model: g 7735 c1
with water treatment unit, 300x360x825mm water purifier, total width: 1200 mm.
dimensions: 900x600x810mm.
condition: good!

for more devices, visit us at: 2hand4sale.de MANUFACTURER: MIELE, MODEL: G 7735 C1 WITH WATER TREATMENT UNIT, 300X360X825MM WATER PURIFIER, TOTAL WIDTH: 1200 MM. DIMENSIONS: 900X600X810MM. CONDITION: GOOD! FOR MORE DEVICES, VISIT US AT: 2HAND4SALE.DE
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Precio: 1.250 €
Ubicación: Land-manufacturer: miele, model: 7738-2 g.
2 door with push-through function.
dimensions: 1050x820x1420mm
elek. voltage: 380v
elek. power: 10.2kw.
condition: good!

ask? write us!
greetings MANUFACTURER: MIELE, MODEL: 7738-2 G. 2 DOOR WITH PUSH-THROUGH FUNCTION. DIMENSIONS: 1050X820X1420MM ELEK. VOLTAGE: 380V ELEK. POWER: 10.2KW. CONDITION: GOOD! ASK? WRITE US! GREETINGS
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Precio: 750 €
Ubicación: Land-d meat grinder

nagema

type: d-114

technical data:

380 v / 50 hz / 16 a cee plug
    disk diameter 114 mm
    1 screw speed
    with schneckenausstoã?er
    blade unger set 5 pieces
    see accessories original images!
    transmission rate: 800 kg / h
    machine weight: 300 kg
    dimensions h/w/d: of 102 x 㸠65 cm total
    rugged & durable machine
    function tested machine ready for use immediately,

see state original images!

if you have questions call or email. D MEAT GRINDER NAGEMA TYPE: D-114 TECHNICAL DATA: 380 V / 50 HZ / 16 A CEE PLUG DISK DIAMETER 114 MM 1 SCREW SPEED WITH SCHNECKENAUSSTO�ER BLADE UNGER SET 5 PIECES SEE ACCESSORIES ORIGINAL IMAGES! TRANSMISSION RATE: 800 KG / H MACHINE WEIGHT: 300 KG DIMENSIONS H/W/D: OF 102 X ø 65 CM TOTAL RUGGED & DURABLE MACHINE FUNCTION TESTED MACHINE READY FOR USE IMMEDIATELY, SEE STATE ORIGINAL IMAGES! IF YOU HAVE QUESTIONS CALL OR EMAIL.
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Ubicación: Land--11 kw
-11,000 rpm.
-pressure circulation lubrication of main bearing
-control cabinet
-stainless steel console table
-roller containers in stainless steel for grist
-vibrodosierrinne
-inlet funnel in v2a -11 KW -11,000 RPM. -PRESSURE CIRCULATION LUBRICATION OF MAIN BEARING -CONTROL CABINET -STAINLESS STEEL CONSOLE TABLE -ROLLER CONTAINERS IN STAINLESS STEEL FOR GRIST -VIBRODOSIERRINNE -INLET FUNNEL IN V2A
Vendedor: TILA GmbH
Año de construcción: usado
Precio: 1.100 €
Ubicación: Land--load wolf blade unger h82
-year of manufacture 2003
-serial number 770300
-320 x 400 + (120) x 430 mm
-400 v, 50 hz, 1.45 kw
-machine tested -LOAD WOLF BLADE UNGER H82 -YEAR OF MANUFACTURE 2003 -SERIAL NUMBER 770300 -320 X 400 + (120) X 430 MM -400 V, 50 HZ, 1.45 KW -MACHINE TESTED
Vendedor: Michael Hartl e.K.
Año de construcción: usado
Precio: 1.470 €
Ubicación: Land-mainca pm82 used meat grinder

complete stainless steel
unger h82 system
400v
1100w
shell removable
well-kept condition
neat and quiet running
machine must be cleaned thoroughly before use

video about test run and more pictures available MAINCA PM82 USED MEAT GRINDER COMPLETE STAINLESS STEEL UNGER H82 SYSTEM 400V 1100W SHELL REMOVABLE WELL-KEPT CONDITION NEAT AND QUIET RUNNING MACHINE MUST BE CLEANED THOROUGHLY BEFORE USE VIDEO ABOUT TEST RUN AND MORE PICTURES AVAILABLE
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Ubicación: Land-previero wet grinder mu510l

75 kw
loading hopper
steel rotor 1000 mm long x 550 mm. diam. water cooled
roll type outer bearings
scissor type cutting
n.3 rotor + n.2 stator steel blades 58/59 hrc
adjustable still and rotating knives
belt transmission
closed rotor with exchageable knif holding parts
electric components with ip54 protection
epossidic paint
unloading hopper
complete with electric cabinet for management
n.1 series of spare knives.
machine reconditioned PREVIERO WET GRINDER MU510L 75 KW LOADING HOPPER STEEL ROTOR 1000 MM LONG X 550 MM. DIAM. WATER COOLED ROLL TYPE OUTER BEARINGS SCISSOR TYPE CUTTING N.3 ROTOR + N.2 STATOR STEEL BLADES 58/59 HRC ADJUSTABLE STILL AND ROTATING KNIVES BELT TRANSMISSION CLOSED ROTOR WITH EXCHAGEABLE KNIF HOLDING PARTS ELECTRIC COMPONENTS WITH IP54 PROTECTION EPOSSIDIC PAINT UNLOADING HOPPER COMPLETE WITH ELECTRIC CABINET FOR MANAGEMENT N.1 SERIES OF SPARE KNIVES. MACHINE RECONDITIONED
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Precio: 12.900 €
Ubicación: Land-in very good condition, model 418, automatic mincer meat grinder kg weather IN VERY GOOD CONDITION, MODEL 418, AUTOMATIC MINCER MEAT GRINDER KG WEATHER
Vendedor: Salm KG
Año de construcción: usado
Ubicación: Land-product number: 1381
type: ww200
serial number: 281/191
year of construction: 1994
hole plate diameter: 200 mm
hopper: 400 l
outfeed height: 750 mm
power: 3 x 400v, 50hz, 45kw
dimensions: 1800 x 1480 x 1850 mm
weight: 2500 kg PRODUCT NUMBER: 1381 TYPE: WW200 SERIAL NUMBER: 281/191 YEAR OF CONSTRUCTION: 1994 HOLE PLATE DIAMETER: 200 MM HOPPER: 400 L OUTFEED HEIGHT: 750 MM POWER: 3 X 400V, 50HZ, 45KW DIMENSIONS: 1800 X 1480 X 1850 MM WEIGHT: 2500 KG
Vendedor: Van Zutphen BV
Año de construcción: usado
Ubicación: Land-alexanderwerk	
model: sln130 i s	
mincer	
serial: 039-04031	
stainless mincer, 100kg, 90degree outfeed, 3ph
 ALEXANDERWERK MODEL: SLN130 I S MINCER SERIAL: 039-04031 STAINLESS MINCER, 100KG, 90DEGREE OUTFEED, 3PH
Vendedor: UFM
Año de construcción: usado
Ubicación: Land-product number: 1355
type: c400uni
hole plate diameter: 400 mm
hopper: 400 liter
capacity: 3 - 6 t/h
power: 3 x 460v, 50hz, 150kw
dimensions: 2750 x 1650 x 2000 mm
weight: 3200 kg PRODUCT NUMBER: 1355 TYPE: C400UNI HOLE PLATE DIAMETER: 400 MM HOPPER: 400 LITER CAPACITY: 3 - 6 T/H POWER: 3 X 460V, 50HZ, 150KW DIMENSIONS: 2750 X 1650 X 2000 MM WEIGHT: 3200 KG
Vendedor: Van Zutphen BV
Año de construcción: usado
Ubicación: Land-product number: 1353
type: mg-130
serial number: 470517
year of construction: 2018
hole plates: 130 mm
capacity: max. 750 kg/hr
speeds: 2
hopper: 250 liter
power: 3 x 400v, 50hz, 11.05kw
dimensions: 1300 x 820 x 1700 mm 
only been used as a demo model PRODUCT NUMBER: 1353 TYPE: MG-130 SERIAL NUMBER: 470517 YEAR OF CONSTRUCTION: 2018 HOLE PLATES: 130 MM CAPACITY: MAX. 750 KG/HR SPEEDS: 2 HOPPER: 250 LITER POWER: 3 X 400V, 50HZ, 11.05KW DIMENSIONS: 1300 X 820 X 1700 MM ONLY BEEN USED AS A DEMO MODEL
Vendedor: Van Zutphen BV
Año de construcción: usado
Ubicación: Land-an angle wolf krã¤mer & grebe is sold by the company of gea
the wolf is in a very good condition and is ready for use immediately

technical data
hopper: ca. 400
capacity: up to 14,000 tons per hour
with sorting device
with mast loading for 200 l bescickungswagen
switching machine
machine made of stainless steel AN ANGLE WOLF KRäMER & GREBE IS SOLD BY THE COMPANY OF GEA THE WOLF IS IN A VERY GOOD CONDITION AND IS READY FOR USE IMMEDIATELY TECHNICAL DATA HOPPER: CA. 400 CAPACITY: UP TO 14,000 TONS PER HOUR WITH SORTING DEVICE WITH MAST LOADING FOR 200 L BESCICKUNGSWAGEN SWITCHING MACHINE MACHINE MADE OF STAINLESS STEEL
Vendedor: An-und Verkauf von Fleischereimaschinen
Año de construcción: usado
Ubicación: Land-fbm grinder 650 mm. 
infeed : 800×500 mm
side  feeding for pipes 300×250 mm.
a.c.motor 37 kw
semi open rotor 650 mm long
n.3 rotor knives + n.2 stator knives
brand new grid with drilling on request
tilting bunker for knives replacement
unloading bunker
electrical cabinet
machine completely reconditioned with sworn appraisal FBM GRINDER 650 MM. INFEED : 800×500 MM SIDE FEEDING FOR PIPES 300×250 MM. A.C.MOTOR 37 KW SEMI OPEN ROTOR 650 MM LONG N.3 ROTOR KNIVES + N.2 STATOR KNIVES BRAND NEW GRID WITH DRILLING ON REQUEST TILTING BUNKER FOR KNIVES REPLACEMENT UNLOADING BUNKER ELECTRICAL CABINET MACHINE COMPLETELY RECONDITIONED WITH SWORN APPRAISAL
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-previero grinder mu715m
conveyor belt with metal detector
infeed 900×1500 mm
granulation chamber 760×1500 mm
motor power 200 kw
rotating blades 6
fixed blades 2
grid 12 mm
extraction vent 18.5 kw
electrical cabinet
tilting loading tray
hydraulic power station for knives and grid replacing
reel feeding unit (missing of motors and gearboxes)
construction year 1995 PREVIERO GRINDER MU715M CONVEYOR BELT WITH METAL DETECTOR INFEED 900×1500 MM GRANULATION CHAMBER 760×1500 MM MOTOR POWER 200 KW ROTATING BLADES 6 FIXED BLADES 2 GRID 12 MM EXTRACTION VENT 18.5 KW ELECTRICAL CABINET TILTING LOADING TRAY HYDRAULIC POWER STATION FOR KNIVES AND GRID REPLACING REEL FEEDING UNIT (MISSING OF MOTORS AND GEARBOXES) CONSTRUCTION YEAR 1995
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-previero pulverizing line 75 kw
previero pulverizer

construction year 2003
dosing unit type dcv 15/50
auger type cl150
metal detector rapid compact  120
pulverizer pd500,
motor 75 kw,
dusting disks 1 fixed + 1 rotating d.500 mm
cutting speed 2650 rpm
pneumatic conveyor type tp11
rotary valve type mald 175/1
fan vpf630
auger type mar65
auger type ma90
bag filling station
machine reconditioned by constructor in 2010
good working conditions PREVIERO PULVERIZING LINE 75 KW PREVIERO PULVERIZER CONSTRUCTION YEAR 2003 DOSING UNIT TYPE DCV 15/50 AUGER TYPE CL150 METAL DETECTOR RAPID COMPACT 120 PULVERIZER PD500, MOTOR 75 KW, DUSTING DISKS 1 FIXED + 1 ROTATING D.500 MM CUTTING SPEED 2650 RPM PNEUMATIC CONVEYOR TYPE TP11 ROTARY VALVE TYPE MALD 175/1 FAN VPF630 AUGER TYPE MAR65 AUGER TYPE MA90 BAG FILLING STATION MACHINE RECONDITIONED BY CONSTRUCTOR IN 2010 GOOD WORKING CONDITIONS
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-previero grinder mill mu 408
mill mu 408
construction year 1992
infeed 410×790 mm
granulation chamber 400×800 mm
motor power 55 kw
rotating blades 3
fixed blades 2
grid 12 mm
extraction blower 15 kw
electrical cabinet
tow group
1 spare grouup of knives (rotor+stator)+
1 template for blades adjustment PREVIERO GRINDER MILL MU 408 MILL MU 408 CONSTRUCTION YEAR 1992 INFEED 410×790 MM GRANULATION CHAMBER 400×800 MM MOTOR POWER 55 KW ROTATING BLADES 3 FIXED BLADES 2 GRID 12 MM EXTRACTION BLOWER 15 KW ELECTRICAL CABINET TOW GROUP 1 SPARE GROUUP OF KNIVES (ROTOR+STATOR)+ 1 TEMPLATE FOR BLADES ADJUSTMENT
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-meccanoplastica grinder 1200t
manifacturer: meccanoplastica
type: 1200t.
construction year 1995.
infeed 1195x330 mm.
cutting chamber 1215 x 215 mm.
suitable for thermoformed trims and such.
screen with 9 mm. holes others available on request.
totally reconditioned.
suitable for thermoformed trims and such.
screen with 9 mm. holes others available on request.
totally reconditioned. MECCANOPLASTICA GRINDER 1200T MANIFACTURER: MECCANOPLASTICA TYPE: 1200T. CONSTRUCTION YEAR 1995. INFEED 1195X330 MM. CUTTING CHAMBER 1215 X 215 MM. SUITABLE FOR THERMOFORMED TRIMS AND SUCH. SCREEN WITH 9 MM. HOLES OTHERS AVAILABLE ON REQUEST. TOTALLY RECONDITIONED. SUITABLE FOR THERMOFORMED TRIMS AND SUCH. SCREEN WITH 9 MM. HOLES OTHERS AVAILABLE ON REQUEST. TOTALLY RECONDITIONED.
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-cmg grinder 700 mm. 
infeed 712×410 mm.
granulation chamber 710×430 mm.
motor power 22 kw
rotating blades 3 + 3
fixed blades 2 + 2
grid holes 3 mm
production 490 kg / h (with 8 mm grid)
the machine is prepared for extracion vent (missing)
construction year 2001 CMG GRINDER 700 MM. INFEED 712×410 MM. GRANULATION CHAMBER 710×430 MM. MOTOR POWER 22 KW ROTATING BLADES 3 + 3 FIXED BLADES 2 + 2 GRID HOLES 3 MM PRODUCTION 490 KG / H (WITH 8 MM GRID) THE MACHINE IS PREPARED FOR EXTRACION VENT (MISSING) CONSTRUCTION YEAR 2001
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-cmg grinder 700 mm.
infeed 712×410 mm.
granulation chamber 710×430 mm.
motor power 22 kw
rotating blades 3 + 3
fixed blades 2 + 2
grid holes 3 mm
production 490 kg / h (with 8 mm grid)
the machine is prepared for side extraction vent (missing)
construction year 2003 CMG GRINDER 700 MM. INFEED 712×410 MM. GRANULATION CHAMBER 710×430 MM. MOTOR POWER 22 KW ROTATING BLADES 3 + 3 FIXED BLADES 2 + 2 GRID HOLES 3 MM PRODUCTION 490 KG / H (WITH 8 MM GRID) THE MACHINE IS PREPARED FOR SIDE EXTRACTION VENT (MISSING) CONSTRUCTION YEAR 2003
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-gaman plast grinder

infeed 500×500 mm.
granulation chamber 450×480 mm.
motor power 15 kw
rotating blades 2
fixed blades 2
grid holes 12 mm
material extraction through collection box
construction year 1999 GAMAN PLAST GRINDER INFEED 500×500 MM. GRANULATION CHAMBER 450×480 MM. MOTOR POWER 15 KW ROTATING BLADES 2 FIXED BLADES 2 GRID HOLES 12 MM MATERIAL EXTRACTION THROUGH COLLECTION BOX CONSTRUCTION YEAR 1999
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-previero grinder mu 408 n

construction year 1992
infeed 410×790 mm
granulation chamber 400×800 mm
motor power 37 kw
rotating blades 3
fixed blades 2
grid 12 mm
extraction blower 15 kw
electric cabinet
tow group, 1 spare group of new knives (rotor+stator) PREVIERO GRINDER MU 408 N CONSTRUCTION YEAR 1992 INFEED 410×790 MM GRANULATION CHAMBER 400×800 MM MOTOR POWER 37 KW ROTATING BLADES 3 FIXED BLADES 2 GRID 12 MM EXTRACTION BLOWER 15 KW ELECTRIC CABINET TOW GROUP, 1 SPARE GROUP OF NEW KNIVES (ROTOR+STATOR)
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-previero grinder mu 408 n

construction year 2003
infeed 500×900 mm
granulation chamber 400×800 mm
motor power 75 kw
rotating blades 3
fixed blades 2
grid 12 mm
extraction blower 15 kw
electric cabinet
tow group PREVIERO GRINDER MU 408 N CONSTRUCTION YEAR 2003 INFEED 500×900 MM GRANULATION CHAMBER 400×800 MM MOTOR POWER 75 KW ROTATING BLADES 3 FIXED BLADES 2 GRID 12 MM EXTRACTION BLOWER 15 KW ELECTRIC CABINET TOW GROUP
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-mixer grinder	
stainless mincer, 140lb hopper, 60lb per min output, stainless guarded lid, 90mm diameter mince plate, mobile
 MIXER GRINDER STAINLESS MINCER, 140LB HOPPER, 60LB PER MIN OUTPUT, STAINLESS GUARDED LID, 90MM DIAMETER MINCE PLATE, MOBILE
Vendedor: UFM
Año de construcción: usado
Ubicación: Land-lad fresh meat mincer type ww 130 complete stainless steel on request with loading for 200 liter standard trolleys 



 LAD FRESH MEAT MINCER TYPE WW 130 COMPLETE STAINLESS STEEL ON REQUEST WITH LOADING FOR 200 LITER STANDARD TROLLEYS
Vendedor: Kröger - Fleischereimaschinen
Año de construcción: usado
Ubicación: Land-stainless mixer/mincer, 100kg batch size, 100mm diameter mince plate, stainless guarded top, 3ph
 STAINLESS MIXER/MINCER, 100KG BATCH SIZE, 100MM DIAMETER MINCE PLATE, STAINLESS GUARDED TOP, 3PH
Vendedor: UFM
Año de construcción: usado
Ubicación: Land-product number: 1286
type: ag160l
serial number: 83087-1
hole plate diameter: 160 mm
capacity: max 7000 kg/hr
power: 3 x 380v, 50hz, 37kw
dimensions: 1800 x 1700 x 1750 mm
weight: 1600 kg 
3 speeds on feed screw
2 speeds on working screw
 PRODUCT NUMBER: 1286 TYPE: AG160L SERIAL NUMBER: 83087-1 HOLE PLATE DIAMETER: 160 MM CAPACITY: MAX 7000 KG/HR POWER: 3 X 380V, 50HZ, 37KW DIMENSIONS: 1800 X 1700 X 1750 MM WEIGHT: 1600 KG 3 SPEEDS ON FEED SCREW 2 SPEEDS ON WORKING SCREW
Vendedor: Van Zutphen BV
Año de construcción: usado
Ubicación: Land-hosokawa mikropul mill acm 2 for sale. the mill is complete and consists of the following parts: mill, cyclone, filter, fan, control cabinet, piping.... like, you can visit the built mill in arnsberg. HOSOKAWA MIKROPUL MILL ACM 2 FOR SALE. THE MILL IS COMPLETE AND CONSISTS OF THE FOLLOWING PARTS: MILL, CYCLONE, FILTER, FAN, CONTROL CABINET, PIPING.... LIKE, YOU CAN VISIT THE BUILT MILL IN ARNSBERG.
Vendedor: Trimetall GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-year of manufacture: 2003

condition: restored

the gyroscope is designed for grinding frozen blocks of meat. works with raw frozen to-18 s. chassis and parts are made of stainless steel, which prevents corrosive effects. 

performance: up to 12000 kilograms per hour

optional installs 2 speed

hole diameter: 200 mm

boot volume: approx. 400 litres tank

connection: 400 50 hz on \ YEAR OF MANUFACTURE: 2003 CONDITION: RESTORED THE GYROSCOPE IS DESIGNED FOR GRINDING FROZEN BLOCKS OF MEAT. WORKS WITH RAW FROZEN TO-18 S. CHASSIS AND PARTS ARE MADE OF STAINLESS STEEL, WHICH PREVENTS CORROSIVE EFFECTS. PERFORMANCE: UP TO 12000 KILOGRAMS PER HOUR OPTIONAL INSTALLS 2 SPEED HOLE DIAMETER: 200 MM BOOT VOLUME: APPROX. 400 LITRES TANK CONNECTION: 400 50 HZ ON \
Vendedor: Normar Trading
Año de construcción: usado
Precio: 5.400 €
Ubicación: Land-lab laboratory line dishwasher miele sink lighting dental laboratory furniture;<br/>  <br/>  laboratory<br/>  <br/>  lab line dishwasher<br/>  <br/>  miele<br/>  <br/>  g 7893spuele lighting<br/>  <br/>  base cabinets<br/>  <br/>  shelves<br/>  <br/>  main nave<br/>  <br/>  3.8 m wide 1.5 m deep<br/>  <br/>  line LAB LABORATORY LINE DISHWASHER MIELE SINK LIGHTING DENTAL LABORATORY FURNITURE;

LABORATORY

LAB LINE DISHWASHER

MIELE

G 7893SPUELE LIGHTING

BASE CABINETS

SHELVES

MAIN NAVE

3.8 M WIDE 1.5 M DEEP

LINE
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Precio: 1.495 €
Ubicación: Land-shop wolf / table wolf

mado

technical data:

type: primus / mew 613
    1.45 kw, 230/400 volt / 5.4/3.2 a / 50 hz
    ejector housing & nut stainless steel
    screw plastic
    stainless steel housing
    3-tlg. unger cutting system
    performance: approx. 350 kg / hour
    bowl volume: 6 liters
    year of construction: 2002
    function checked, device is ready to plug & immediately ready for use!

the grinder works fine, see pictures original condition!

if you have questions, email or call.  SHOP WOLF / TABLE WOLF MADO TECHNICAL DATA: TYPE: PRIMUS / MEW 613 1.45 KW, 230/400 VOLT / 5.4/3.2 A / 50 HZ EJECTOR HOUSING & NUT STAINLESS STEEL SCREW PLASTIC STAINLESS STEEL HOUSING 3-TLG. UNGER CUTTING SYSTEM PERFORMANCE: APPROX. 350 KG / HOUR BOWL VOLUME: 6 LITERS YEAR OF CONSTRUCTION: 2002 FUNCTION CHECKED, DEVICE IS READY TO PLUG & IMMEDIATELY READY FOR USE! THE GRINDER WORKS FINE, SEE PICTURES ORIGINAL CONDITION! IF YOU HAVE QUESTIONS, EMAIL OR CALL.
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Precio: 2.100 €
Ubicación: Land-de Germany, 46325 Borken
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Precio: 900 €
Ubicación: Land-d meat grinder

se-ma

type: dsw

technical data:

380 v / 50 hz / 32 a cee plug
    disk diameter 114 mm
    1 screw speed
    blade unger 3-piece set (see accessories pictures!)
    transmission rate: 1000 kg / h
    machine weight: 400 kg
    dimensions h/w/d: total 106 x 70 x 100 cm
    hopper capacity: approx. 85 kg
    function tested machine ready for use immediately,

see state original images!

if you have questions call or email. D MEAT GRINDER SE-MA TYPE: DSW TECHNICAL DATA: 380 V / 50 HZ / 32 A CEE PLUG DISK DIAMETER 114 MM 1 SCREW SPEED BLADE UNGER 3-PIECE SET (SEE ACCESSORIES PICTURES!) TRANSMISSION RATE: 1000 KG / H MACHINE WEIGHT: 400 KG DIMENSIONS H/W/D: TOTAL 106 X 70 X 100 CM HOPPER CAPACITY: APPROX. 85 KG FUNCTION TESTED MACHINE READY FOR USE IMMEDIATELY, SEE STATE ORIGINAL IMAGES! IF YOU HAVE QUESTIONS CALL OR EMAIL.
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-a generally overhauled, fully operational machine A GENERALLY OVERHAULED, FULLY OPERATIONAL MACHINE
Vendedor: MM Servis
Año de construcción: usado
Precio: 6.500 €
Ubicación: Land-a new meat mincer produced by mm service ltd. A NEW MEAT MINCER PRODUCED BY MM SERVICE LTD.
Vendedor: MM Servis
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MIELE types: