42 ofertas

Año de construcción: usado
Precio: 7.900 €
Ubicación: Land-fws 15 with a cnc railway control heidenhain tnc 151

-adjustable control panel
-electronic hand wheel
table size 1500x400mm
-t-slots 5 piece
traverse paths x axis 1200 mm y 450 mm z axis axis 450 mm
table load of 630 kg
tool holder sk 50
-spindle speed range continuously variable 31-3550 rpm-vertical + horizontal
feed range 1-2000 mm / min
rapid traverse 4000 mm / min
-vertical milling head tilting to the left and right
-horizontal milling head with overarm
-hydraulic tool clamping vertical + horizontal
-hydraulic lubrication for the milling head
central lubrication system
interface rs 232
ball screws on all three axes
width stable guideways
cooling plant with chip tray
power 15kw
total power 25kw
feed force 10,000 newton
weight 4000kg
-complete machine documentation
space without full casing l x w x h approx. 3700 x 2200 x 2200
-the machine can be visited by appointment, of course, a trial run is possible.

in addition tool holders and various are the machine, as shown on the picture to see the two cars, including the approximately 40 pcs. tools, as well as a hydraulic machine vise.

the milling machine is built in 1986 and is located in a clean condition.

commission: sales in the sales order.

net price: â?¬7.900,00 + 19% vat
gross price: â?¬9.401,00 incl. 19% vat

87742 apfeltrach, visit is at any time possible and desirable, for questions andreas wiã?miller available under 0160/8037872 available.

the goods are sold as seen and tested exclusively for commercial purposes, without any guarantee and warranty!

we can arrange the preparation of export documents and the transport for you worldwide. 

all information without guarantee, errors and spelling mistakes, and subject to prior sale!
 FWS 15 WITH A CNC RAILWAY CONTROL HEIDENHAIN TNC 151 -ADJUSTABLE CONTROL PANEL -ELECTRONIC HAND WHEEL TABLE SIZE 1500X400MM -T-SLOTS 5 PIECE TRAVERSE PATHS X AXIS 1200 MM Y 450 MM Z AXIS AXIS 450 MM TABLE LOAD OF 630 KG TOOL HOLDER SK 50 -SPINDLE SPEED RANGE CONTINUOUSLY VARIABLE 31-3550 RPM-VERTICAL + HORIZONTAL FEED RANGE 1-2000 MM / MIN RAPID TRAVERSE 4000 MM / MIN -VERTICAL MILLING HEAD TILTING TO THE LEFT AND RIGHT -HORIZONTAL MILLING HEAD WITH OVERARM -HYDRAULIC TOOL CLAMPING VERTICAL + HORIZONTAL -HYDRAULIC LUBRICATION FOR THE MILLING HEAD CENTRAL LUBRICATION SYSTEM INTERFACE RS 232 BALL SCREWS ON ALL THREE AXES WIDTH STABLE GUIDEWAYS COOLING PLANT WITH CHIP TRAY POWER 15KW TOTAL POWER 25KW FEED FORCE 10,000 NEWTON WEIGHT 4000KG -COMPLETE MACHINE DOCUMENTATION SPACE WITHOUT FULL CASING L X W X H APPROX. 3700 X 2200 X 2200 -THE MACHINE CAN BE VISITED BY APPOINTMENT, OF COURSE, A TRIAL RUN IS POSSIBLE. IN ADDITION TOOL HOLDERS AND VARIOUS ARE THE MACHINE, AS SHOWN ON THE PICTURE TO SEE THE TWO CARS, INCLUDING THE APPROXIMATELY 40 PCS. TOOLS, AS WELL AS A HYDRAULIC MACHINE VISE. THE MILLING MACHINE IS BUILT IN 1986 AND IS LOCATED IN A CLEAN CONDITION. COMMISSION: SALES IN THE SALES ORDER. NET PRICE: Â?¬7.900,00 + 19% VAT GROSS PRICE: Â?¬9.401,00 INCL. 19% VAT 87742 APFELTRACH, VISIT IS AT ANY TIME POSSIBLE AND DESIRABLE, FOR QUESTIONS ANDREAS WIÃ?MILLER AVAILABLE UNDER 0160/8037872 AVAILABLE. THE GOODS ARE SOLD AS SEEN AND TESTED EXCLUSIVELY FOR COMMERCIAL PURPOSES, WITHOUT ANY GUARANTEE AND WARRANTY! WE CAN ARRANGE THE PREPARATION OF EXPORT DOCUMENTS AND THE TRANSPORT FOR YOU WORLDWIDE. ALL INFORMATION WITHOUT GUARANTEE, ERRORS AND SPELLING MISTAKES, AND SUBJECT TO PRIOR SALE!
Vendedor: AW Handels GmbH
Año de construcción: usado
Precio: 1.950 €
Ubicación: Land-notching machine, notch milling machine, window construction <br /><br /> for milling fighter and base designs <br /> drilling of fixing holes in one operation <br /> -automatically infinitely variable feed <br /> milling head o 38 mm <br /> dimensions 2000/1100 / h1350 mm <br /> -weight 350 kg NOTCHING MACHINE, NOTCH MILLING MACHINE, WINDOW CONSTRUCTION

FOR MILLING FIGHTER AND BASE DESIGNS
DRILLING OF FIXING HOLES IN ONE OPERATION
-AUTOMATICALLY INFINITELY VARIABLE FEED
MILLING HEAD O 38 MM
DIMENSIONS 2000/1100 / H1350 MM
-WEIGHT 350 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 19.900 €
Ubicación: Land-tin snips, shears, shear (k020)

brand: volz
type: eurocut
year of production: around 1995
weight: approx. 10-12 tons
description: hydraulic bechschere volz eurocat with 3,000 mm max sheet width
max attack 1. 000mm, sheet thickness up to 12 mm
cutting angle adjustment, hydraulic clamp
condition: used, well maintained good condition, fully operational, loading possible

commission: sales in the sales order.

net price: â?¬19.900,00 + 19% vat (vat is shown)
gross price: â?¬23.681,00 incl. 19% vat

87742 apfeltrach, visit is at any time possible and desirable, for questions, andreas wiã?miller is available under the following telephone number: 0160/8037872 at your disposal. 

the goods are sold as seen and tested exclusively for commercial purposes, without any guarantee and warranty! 

we can arrange the preparation of export documents and the transport for you worldwide. 

all information without guarantee, errors and spelling mistakes, and subject to prior sale!
 TIN SNIPS, SHEARS, SHEAR (K020) BRAND: VOLZ TYPE: EUROCUT YEAR OF PRODUCTION: AROUND 1995 WEIGHT: APPROX. 10-12 TONS DESCRIPTION: HYDRAULIC BECHSCHERE VOLZ EUROCAT WITH 3,000 MM MAX SHEET WIDTH MAX ATTACK 1. 000MM, SHEET THICKNESS UP TO 12 MM CUTTING ANGLE ADJUSTMENT, HYDRAULIC CLAMP CONDITION: USED, WELL MAINTAINED GOOD CONDITION, FULLY OPERATIONAL, LOADING POSSIBLE COMMISSION: SALES IN THE SALES ORDER. NET PRICE: &ACIRC;?&NOT;19.900,00 + 19% VAT (VAT IS SHOWN) GROSS PRICE: &ACIRC;?&NOT;23.681,00 INCL. 19% VAT 87742 APFELTRACH, VISIT IS AT ANY TIME POSSIBLE AND DESIRABLE, FOR QUESTIONS, ANDREAS WI&ATILDE;?MILLER IS AVAILABLE UNDER THE FOLLOWING TELEPHONE NUMBER: 0160/8037872 AT YOUR DISPOSAL. THE GOODS ARE SOLD AS SEEN AND TESTED EXCLUSIVELY FOR COMMERCIAL PURPOSES, WITHOUT ANY GUARANTEE AND WARRANTY! WE CAN ARRANGE THE PREPARATION OF EXPORT DOCUMENTS AND THE TRANSPORT FOR YOU WORLDWIDE. ALL INFORMATION WITHOUT GUARANTEE, ERRORS AND SPELLING MISTAKES, AND SUBJECT TO PRIOR SALE!
Vendedor: AW Handels GmbH
Año de construcción: usado
Ubicación: Land-single sided egde banding machine\r\nbrand: homag\r\ntype: optimat kal 310/8/a20/s2\r\nyear: 2007\r\nstop on the left hand side\r\nwith workpiece return\r\n\r\ntechnical data:\r\n- feed 18 m/min\r\n- working height 950mm\r\n- working width min.:\r\n55mm at workpiece thickness 22mm, 100mm at workpiece thickness 60mm\r\n(depending on the workpiece length)\r\n- workpiece overhang 30mm\r\n- workpiece thickness 12-60mm\r\n- edge material strip max. 0,4-20mm\r\n- edge cross sectional area strips max. 900mm²\r\n- edge material coil 0,3-3mm\r\n- edge cross sectional area max. at pvc 135mm², at veneer 100mm²\r\n- coil-Ø max. 830mm\r\n\r\ntransport chain 80m wide with rubbered top\r\ntop pressure with v-belt, motorical height adjustment and digital display\r\n\r\npower control pc22 with sps-control\r\n\r\npre-milling unit\r\n- 2 motors each 3 kw\r\n\r\nworkpiece pre-heating\r\n\r\ncompact gluing unit pu34\r\n- edge thickness max. 6mm (at a12/a20)\r\n- pur-melting unit\r\n- chemcoat-antioxidation coat\r\n- temperature control\r\n- bundling size 3l\r\n- capacity 18l\r\n\r\nleimaftragseinheit für pu\r\n- chemcoat-antioxidation coat\r\n- fill level monitoring\r\n- air dryer\r\n- anti-stick solvent application top / bottom\r\n\r\nautom. adjusment of pressure zone\r\n1 driven pre-pressure roller, Ø 150mm\r\n6 post-pressure roller, Ø 70mm\r\n\r\nedge magazine 6 rollen\r\n- edge thickness 6x3mm\r\n- coil-Ø 6x830\r\n- rest length monitoring at 2400mm\r\n\r\nsupporting edge gluing\r\nfor lockless honeycomb panels and honeycomb panels with two glued locks\r\njust possible together with:\r\n- 2 pre-millers for groove milling for the put-in of the supporting edge, height adjustment, honeycomb panels 40-50mm thickness\r\n- melting unit and glue nozzles to insert the glue beads in the honeycomb panels\r\n- preparation of the edge magazine for supporting edges, max. 3 mm edge thickness, max. 3 mm decor edge\r\n\r\nfunction:\r\n- four sided edging of lockless honeycomb panels:\r\nthroughfeed 1-4: gluing of supporting edges lengthwise and crosswise, throughfeed 5-8: gluing of decor edges\r\n- function at four sided edging of honeycomb panels with two glued locks\r\nthroughfeed 1-2 gluing of supporting edge on two sides, throughfeed: 3-6 gluing of decor edges\r\n\r\nsupporting edge material \r\ncoil ware: 16-55mm\r\nedge dicke 2-3mm\r\nkind of edge: mulit-layer glued wood edge, supporting edge of rehau\r\n\r\nend trimming unit hl 04 / 05\r\nfor workpieces with surface layer overhang up to max. 10mm\r\n\r\nfeed stepless controllable 18-25 m/min\r\n\r\nsliding table 500x1600mm\r\n\r\nrough milling unit 1,5 kw\r\n- 2 motors each 1,5 kw, one above the other \r\n\r\nform milling unit fk 13, 8-fold automatical\r\n- 2 motors each 0,4 kw\r\n\r\n600 mm empty space\r\n\r\nmulti-post-cleaning device mn21 automatical\r\n\r\nfinish unit fa11 top / bottom\r\n- post-cleaning glued joint\r\n- cleaning agent application\r\n-buffing unit\r\n\r\nset up during the transport of the next workpiece, so the machine need not to be driven until there are no workpieces in it.\r\n\r\nbarcode-reader\r\n\r\nworkpiece return:\r\nair cushion table: 2500mm long, 1000mm wide about approx. 60mm inclined positioned\r\ntransport belt: wide 900mm\r\nnot driven roller conveyor: length 2000mm, width 900mm\r\nextension of roller conveyor about 500mm\r\noverhang: approx. 250mm\r\n\r\nbelt cleaning, single-fold\r\n\r\nworkpieces:\r\nlength 300-2500mm or. 300-800mm\r\nwidth 60-800mm or. 800-2000mm\r\nthickness 8-60mm\r\nweight max. 50 kg\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding.\r\n\r\n SINGLE SIDED EGDE BANDING MACHINE\R\NBRAND: HOMAG\R\NTYPE: OPTIMAT KAL 310/8/A20/S2\R\NYEAR: 2007\R\NSTOP ON THE LEFT HAND SIDE\R\NWITH WORKPIECE RETURN\R\N\R\NTECHNICAL DATA:\R\N- FEED 18 M/MIN\R\N- WORKING HEIGHT 950MM\R\N- WORKING WIDTH MIN.:\R\N55MM AT WORKPIECE THICKNESS 22MM, 100MM AT WORKPIECE THICKNESS 60MM\R\N(DEPENDING ON THE WORKPIECE LENGTH)\R\N- WORKPIECE OVERHANG 30MM\R\N- WORKPIECE THICKNESS 12-60MM\R\N- EDGE MATERIAL STRIP MAX. 0,4-20MM\R\N- EDGE CROSS SECTIONAL AREA STRIPS MAX. 900MM²\R\N- EDGE MATERIAL COIL 0,3-3MM\R\N- EDGE CROSS SECTIONAL AREA MAX. AT PVC 135MM², AT VENEER 100MM²\R\N- COIL-Ø MAX. 830MM\R\N\R\NTRANSPORT CHAIN 80M WIDE WITH RUBBERED TOP\R\NTOP PRESSURE WITH V-BELT, MOTORICAL HEIGHT ADJUSTMENT AND DIGITAL DISPLAY\R\N\R\NPOWER CONTROL PC22 WITH SPS-CONTROL\R\N\R\NPRE-MILLING UNIT\R\N- 2 MOTORS EACH 3 KW\R\N\R\NWORKPIECE PRE-HEATING\R\N\R\NCOMPACT GLUING UNIT PU34\R\N- EDGE THICKNESS MAX. 6MM (AT A12/A20)\R\N- PUR-MELTING UNIT\R\N- CHEMCOAT-ANTIOXIDATION COAT\R\N- TEMPERATURE CONTROL\R\N- BUNDLING SIZE 3L\R\N- CAPACITY 18L\R\N\R\NLEIMAFTRAGSEINHEIT FüR PU\R\N- CHEMCOAT-ANTIOXIDATION COAT\R\N- FILL LEVEL MONITORING\R\N- AIR DRYER\R\N- ANTI-STICK SOLVENT APPLICATION TOP / BOTTOM\R\N\R\NAUTOM. ADJUSMENT OF PRESSURE ZONE\R\N1 DRIVEN PRE-PRESSURE ROLLER, Ø 150MM\R\N6 POST-PRESSURE ROLLER, Ø 70MM\R\N\R\NEDGE MAGAZINE 6 ROLLEN\R\N- EDGE THICKNESS 6X3MM\R\N- COIL-Ø 6X830\R\N- REST LENGTH MONITORING AT 2400MM\R\N\R\NSUPPORTING EDGE GLUING\R\NFOR LOCKLESS HONEYCOMB PANELS AND HONEYCOMB PANELS WITH TWO GLUED LOCKS\R\NJUST POSSIBLE TOGETHER WITH:\R\N- 2 PRE-MILLERS FOR GROOVE MILLING FOR THE PUT-IN OF THE SUPPORTING EDGE, HEIGHT ADJUSTMENT, HONEYCOMB PANELS 40-50MM THICKNESS\R\N- MELTING UNIT AND GLUE NOZZLES TO INSERT THE GLUE BEADS IN THE HONEYCOMB PANELS\R\N- PREPARATION OF THE EDGE MAGAZINE FOR SUPPORTING EDGES, MAX. 3 MM EDGE THICKNESS, MAX. 3 MM DECOR EDGE\R\N\R\NFUNCTION:\R\N- FOUR SIDED EDGING OF LOCKLESS HONEYCOMB PANELS:\R\NTHROUGHFEED 1-4: GLUING OF SUPPORTING EDGES LENGTHWISE AND CROSSWISE, THROUGHFEED 5-8: GLUING OF DECOR EDGES\R\N- FUNCTION AT FOUR SIDED EDGING OF HONEYCOMB PANELS WITH TWO GLUED LOCKS\R\NTHROUGHFEED 1-2 GLUING OF SUPPORTING EDGE ON TWO SIDES, THROUGHFEED: 3-6 GLUING OF DECOR EDGES\R\N\R\NSUPPORTING EDGE MATERIAL \R\NCOIL WARE: 16-55MM\R\NEDGE DICKE 2-3MM\R\NKIND OF EDGE: MULIT-LAYER GLUED WOOD EDGE, SUPPORTING EDGE OF REHAU\R\N\R\NEND TRIMMING UNIT HL 04 / 05\R\NFOR WORKPIECES WITH SURFACE LAYER OVERHANG UP TO MAX. 10MM\R\N\R\NFEED STEPLESS CONTROLLABLE 18-25 M/MIN\R\N\R\NSLIDING TABLE 500X1600MM\R\N\R\NROUGH MILLING UNIT 1,5 KW\R\N- 2 MOTORS EACH 1,5 KW, ONE ABOVE THE OTHER \R\N\R\NFORM MILLING UNIT FK 13, 8-FOLD AUTOMATICAL\R\N- 2 MOTORS EACH 0,4 KW\R\N\R\N600 MM EMPTY SPACE\R\N\R\NMULTI-POST-CLEANING DEVICE MN21 AUTOMATICAL\R\N\R\NFINISH UNIT FA11 TOP / BOTTOM\R\N- POST-CLEANING GLUED JOINT\R\N- CLEANING AGENT APPLICATION\R\N-BUFFING UNIT\R\N\R\NSET UP DURING THE TRANSPORT OF THE NEXT WORKPIECE, SO THE MACHINE NEED NOT TO BE DRIVEN UNTIL THERE ARE NO WORKPIECES IN IT.\R\N\R\NBARCODE-READER\R\N\R\NWORKPIECE RETURN:\R\NAIR CUSHION TABLE: 2500MM LONG, 1000MM WIDE ABOUT APPROX. 60MM INCLINED POSITIONED\R\NTRANSPORT BELT: WIDE 900MM\R\NNOT DRIVEN ROLLER CONVEYOR: LENGTH 2000MM, WIDTH 900MM\R\NEXTENSION OF ROLLER CONVEYOR ABOUT 500MM\R\NOVERHANG: APPROX. 250MM\R\N\R\NBELT CLEANING, SINGLE-FOLD\R\N\R\NWORKPIECES:\R\NLENGTH 300-2500MM OR. 300-800MM\R\NWIDTH 60-800MM OR. 800-2000MM\R\NTHICKNESS 8-60MM\R\NWEIGHT MAX. 50 KG\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.\R\N\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 2.933 €
Ubicación: Land-stud welder "arc" (k038)

brand: soyer
type: bmh 16 s
year of construction: 1995
with complete equipment
condition: good, used, ready to use, loading possible, shipping extra charge

commission: sales in the sales order.

net price: â?¬2932,78 + 19% vat
gross price: â?¬3.490,00 incl. 19% vat (vat is shown) 87742 apfeltrach, visit is at any time possible and desirable, for questions, andreas wiã?miller is available under the following telephone number: 0160/8037872 at your disposal. 

the goods are sold as seen and tested exclusively for commercial purposes, without any guarantee and warranty! 

all information without guarantee, errors and spelling mistakes, and subject to prior sale!
 STUD WELDER "ARC" (K038) BRAND: SOYER TYPE: BMH 16 S YEAR OF CONSTRUCTION: 1995 WITH COMPLETE EQUIPMENT CONDITION: GOOD, USED, READY TO USE, LOADING POSSIBLE, SHIPPING EXTRA CHARGE COMMISSION: SALES IN THE SALES ORDER. NET PRICE: &ACIRC;?&NOT;2932,78 + 19% VAT GROSS PRICE: &ACIRC;?&NOT;3.490,00 INCL. 19% VAT (VAT IS SHOWN) 87742 APFELTRACH, VISIT IS AT ANY TIME POSSIBLE AND DESIRABLE, FOR QUESTIONS, ANDREAS WI&ATILDE;?MILLER IS AVAILABLE UNDER THE FOLLOWING TELEPHONE NUMBER: 0160/8037872 AT YOUR DISPOSAL. THE GOODS ARE SOLD AS SEEN AND TESTED EXCLUSIVELY FOR COMMERCIAL PURPOSES, WITHOUT ANY GUARANTEE AND WARRANTY! ALL INFORMATION WITHOUT GUARANTEE, ERRORS AND SPELLING MISTAKES, AND SUBJECT TO PRIOR SALE!
Vendedor: AW Handels GmbH
Año de construcción: usado
Precio: 31.500 €
Ubicación: Land-single sided edge banding machine\r\nmake: homag\r\ntype: kl 79/a20/s2-20mm\r\nyear: 2000\r\n\r\ntechnical data:\r\ncoil or as strip, up to 20 mm edge thickness, in lenghtwise and crosswise feed.\r\n\r\ncontrol nc21\r\n\r\n- feed stepless controllable 18 - 24 m/min\r\n- working height 950 mm\r\n- working width min.:\r\n- 55 mm at workpiece thickness 22 mm, 100 mm at workpiece thickness 60 mm (depending on the workpiece length)\r\n- workpiece overhang 30 mm\r\n- workpiece thickness 12 - 60 mm\r\n- edge material strip max. 0,4 - 20 mm\r\n- edge cross sectional area strip max. 900 mm2\r\n- edge material coil 0,3 - 3 mm\r\n- edge cross sectional area max.: at pvc 135 mm2,  at veneer 100 mm2\r\n- coil Ø max. 830 mm\r\n- floor condition should match the foundation plan.\r\n\r\nsliding table\r\n- for rectangular feed at single sided processing.\r\n-workpiece dimensions max. 500 x 1600 mm\r\n\r\nanti-stick solvent application\r\n-via spraying nozzles top/bottom\r\n\r\npre-milling unit \r\n2 motoren je 3 kw, 150 hz, 9000 1/min.\r\n\r\nworkpiece pre-heating:\r\nto heat the workpiece edge before glue application for a better glue quality\r\n\r\ngluing unit a20:\r\nconsisting of:\r\nhot melt unit 0a34\r\n\r\nmagazine\r\nfor strip ware, massive edges and coil ware\r\nfeed of strip ware via vacuum succer\r\nedge monitoring with automatical feed stop at missing edge\r\n\r\npressure zone c\r\n1 driven pre-pressure roller Ø 150 mm\r\n6 post-pressure rollers Ø 70 mm\r\npressure adjustments pneumatical\r\ncentral adjustment on different edge thicknesses\r\n\r\nautomatical adjustment pressure zone optimat\r\nfor automatical adjustment of pressure zone at different edge thickness\r\n\r\n1 pc. chip removal conveyor for optimat installed in machine stand.\r\n\r\nend trimming unit hl 83 chamfer/straight\r\n2 motors each 0,5 kw, 200 hz., 12000 rpm.\r\nfor the end trimming of edge overhangs on frontal and rear edge\r\nedge thickness chamfer max. 3 mm\r\n\r\nautomatical adjustment hl 81/83\r\nfor electropneumatical setup from chamfer to straight and stepless adjustment of foldable side stop for chamfer end trimming at different edge thicknesses.\r\n\r\npneumatical adjustment end trimming motor lateral for electropneumatical side adjustments of end trimming motors on 2 positions.\r\nposition 1 - flush trimming\r\nposition 2 - end trimming with overhang - for post-milling with profile milling unit\r\n\r\n1 pc rough milling unit 1,5 kw optimat\r\n2 motors one above the other each 1,5 kw, 200 hz., 12000 rpm.\r\n\r\n1 pc pneumatical adjustment rough milling unit optimat on 2 positions\r\nposition 1 - rough milling with edge overhang (approx. 0,2 mm)\r\nposition 2 - flush milling without edge overhang\r\n\r\n1 pc. profile milling unit fk 13 8-fold automatical\r\nfor processing of edge overhangs on the workpiece top- and bottom edge as well for milling arround top- and bottom edge in connection to end trimming unit and rough milling unit.\r\n2 motors each 0,4 kw, 200 hz., 12000 rpm.\r\nautomatical 8 -fold tool changer.\r\nselector switch lengthwise-/surround milling.\r\nfeed max. 20 m/min.\r\nworkpiece length min. -  240 mm single sidede, 120 mm double sided\r\ndistance between workpieces min. 650 mm\r\nworkpiece thickness 12  -  60 mm\r\nedge thickness max. 5 mm\r\n\r\nautomatical adjustment for fk-device\r\nfor automatical adjustment at same radii on different edge thickness f.e. r=3 mm on egde thickness 3 mm or 6 mm and for moving out of the working area.\r\n\r\n1 x universal milling unit 4 kw controlled uf11\r\n- installed on back side of miller stand\r\n- cross support with spindle adjustment\r\n- 1 motor 4 kw, 150 hz., 9000 rpm\r\n- swivable max. 90 degrees\r\n\r\n1 pc. re-cleaning unit profile\r\ntracing from above, bottom and side for chamfering or rounding of rough milled pvc-edges. blowing nozzles electropneumatical controlled.\r\n\r\n1 pc. pvc-chip tear off top/bottom for better pvc-chip removal\r\n\r\n2 pcs. pneumatic adjustment re-cleaning profil optimat\r\nfor electropneumatical lateral move out of the working area.\r\n\r\n1 pc. re-cleaning device glued joint\r\nremove of glue rests in the area of glued joint. tracing from top and bottom.\r\n\r\n1 pc. pneumatic adjusments re-cleaning profil optimat\r\nfor electropneumatical lateral move out of the working area\r\n\r\n1 pc. buffing unit top and bottom with oscilating for making the edges handy.\r\n2 motors each 0,25 kw, tilt and height adjustable\r\n\r\nligmatech workpiece return\r\nzhr 10/s left hand side 9500 mm\r\n\r\nfor edge banding machine left hand side, length approx. 9500 mm\r\nthe workpiece return zhr 10 allows the one-man-operation of single sided throughfeed machines. workpieces which come out of the machine are transported to a roller conveyor and will be crosswise transfered via a driven v-belt and will be returned via a belt and a roller table.\r\n\r\nthe option turning plus top pressure allows the 90° turn of workpieces coming out of the machine and will be lengthwise returned\r\n\r\nthe following version consists of:\r\n-  roller conveyor tr 10/42/22 with takeover v-belts of the kl\r\nturning plate with turn support, thickness adjustment manual\r\nsmall parts construction set in front of cycle fenc SINGLE SIDED EDGE BANDING MACHINE\R\NMAKE: HOMAG\R\NTYPE: KL 79/A20/S2-20MM\R\NYEAR: 2000\R\N\R\NTECHNICAL DATA:\R\NCOIL OR AS STRIP, UP TO 20 MM EDGE THICKNESS, IN LENGHTWISE AND CROSSWISE FEED.\R\N\R\NCONTROL NC21\R\N\R\N- FEED STEPLESS CONTROLLABLE 18 - 24 M/MIN\R\N- WORKING HEIGHT 950 MM\R\N- WORKING WIDTH MIN.:\R\N- 55 MM AT WORKPIECE THICKNESS 22 MM, 100 MM AT WORKPIECE THICKNESS 60 MM (DEPENDING ON THE WORKPIECE LENGTH)\R\N- WORKPIECE OVERHANG 30 MM\R\N- WORKPIECE THICKNESS 12 - 60 MM\R\N- EDGE MATERIAL STRIP MAX. 0,4 - 20 MM\R\N- EDGE CROSS SECTIONAL AREA STRIP MAX. 900 MM2\R\N- EDGE MATERIAL COIL 0,3 - 3 MM\R\N- EDGE CROSS SECTIONAL AREA MAX.: AT PVC 135 MM2, AT VENEER 100 MM2\R\N- COIL Ø MAX. 830 MM\R\N- FLOOR CONDITION SHOULD MATCH THE FOUNDATION PLAN.\R\N\R\NSLIDING TABLE\R\N- FOR RECTANGULAR FEED AT SINGLE SIDED PROCESSING.\R\N-WORKPIECE DIMENSIONS MAX. 500 X 1600 MM\R\N\R\NANTI-STICK SOLVENT APPLICATION\R\N-VIA SPRAYING NOZZLES TOP/BOTTOM\R\N\R\NPRE-MILLING UNIT \R\N2 MOTOREN JE 3 KW, 150 HZ, 9000 1/MIN.\R\N\R\NWORKPIECE PRE-HEATING:\R\NTO HEAT THE WORKPIECE EDGE BEFORE GLUE APPLICATION FOR A BETTER GLUE QUALITY\R\N\R\NGLUING UNIT A20:\R\NCONSISTING OF:\R\NHOT MELT UNIT 0A34\R\N\R\NMAGAZINE\R\NFOR STRIP WARE, MASSIVE EDGES AND COIL WARE\R\NFEED OF STRIP WARE VIA VACUUM SUCCER\R\NEDGE MONITORING WITH AUTOMATICAL FEED STOP AT MISSING EDGE\R\N\R\NPRESSURE ZONE C\R\N1 DRIVEN PRE-PRESSURE ROLLER Ø 150 MM\R\N6 POST-PRESSURE ROLLERS Ø 70 MM\R\NPRESSURE ADJUSTMENTS PNEUMATICAL\R\NCENTRAL ADJUSTMENT ON DIFFERENT EDGE THICKNESSES\R\N\R\NAUTOMATICAL ADJUSTMENT PRESSURE ZONE OPTIMAT\R\NFOR AUTOMATICAL ADJUSTMENT OF PRESSURE ZONE AT DIFFERENT EDGE THICKNESS\R\N\R\N1 PC. CHIP REMOVAL CONVEYOR FOR OPTIMAT INSTALLED IN MACHINE STAND.\R\N\R\NEND TRIMMING UNIT HL 83 CHAMFER/STRAIGHT\R\N2 MOTORS EACH 0,5 KW, 200 HZ., 12000 RPM.\R\NFOR THE END TRIMMING OF EDGE OVERHANGS ON FRONTAL AND REAR EDGE\R\NEDGE THICKNESS CHAMFER MAX. 3 MM\R\N\R\NAUTOMATICAL ADJUSTMENT HL 81/83\R\NFOR ELECTROPNEUMATICAL SETUP FROM CHAMFER TO STRAIGHT AND STEPLESS ADJUSTMENT OF FOLDABLE SIDE STOP FOR CHAMFER END TRIMMING AT DIFFERENT EDGE THICKNESSES.\R\N\R\NPNEUMATICAL ADJUSTMENT END TRIMMING MOTOR LATERAL FOR ELECTROPNEUMATICAL SIDE ADJUSTMENTS OF END TRIMMING MOTORS ON 2 POSITIONS.\R\NPOSITION 1 - FLUSH TRIMMING\R\NPOSITION 2 - END TRIMMING WITH OVERHANG - FOR POST-MILLING WITH PROFILE MILLING UNIT\R\N\R\N1 PC ROUGH MILLING UNIT 1,5 KW OPTIMAT\R\N2 MOTORS ONE ABOVE THE OTHER EACH 1,5 KW, 200 HZ., 12000 RPM.\R\N\R\N1 PC PNEUMATICAL ADJUSTMENT ROUGH MILLING UNIT OPTIMAT ON 2 POSITIONS\R\NPOSITION 1 - ROUGH MILLING WITH EDGE OVERHANG (APPROX. 0,2 MM)\R\NPOSITION 2 - FLUSH MILLING WITHOUT EDGE OVERHANG\R\N\R\N1 PC. PROFILE MILLING UNIT FK 13 8-FOLD AUTOMATICAL\R\NFOR PROCESSING OF EDGE OVERHANGS ON THE WORKPIECE TOP- AND BOTTOM EDGE AS WELL FOR MILLING ARROUND TOP- AND BOTTOM EDGE IN CONNECTION TO END TRIMMING UNIT AND ROUGH MILLING UNIT.\R\N2 MOTORS EACH 0,4 KW, 200 HZ., 12000 RPM.\R\NAUTOMATICAL 8 -FOLD TOOL CHANGER.\R\NSELECTOR SWITCH LENGTHWISE-/SURROUND MILLING.\R\NFEED MAX. 20 M/MIN.\R\NWORKPIECE LENGTH MIN. - 240 MM SINGLE SIDEDE, 120 MM DOUBLE SIDED\R\NDISTANCE BETWEEN WORKPIECES MIN. 650 MM\R\NWORKPIECE THICKNESS 12 - 60 MM\R\NEDGE THICKNESS MAX. 5 MM\R\N\R\NAUTOMATICAL ADJUSTMENT FOR FK-DEVICE\R\NFOR AUTOMATICAL ADJUSTMENT AT SAME RADII ON DIFFERENT EDGE THICKNESS F.E. R=3 MM ON EGDE THICKNESS 3 MM OR 6 MM AND FOR MOVING OUT OF THE WORKING AREA.\R\N\R\N1 X UNIVERSAL MILLING UNIT 4 KW CONTROLLED UF11\R\N- INSTALLED ON BACK SIDE OF MILLER STAND\R\N- CROSS SUPPORT WITH SPINDLE ADJUSTMENT\R\N- 1 MOTOR 4 KW, 150 HZ., 9000 RPM\R\N- SWIVABLE MAX. 90 DEGREES\R\N\R\N1 PC. RE-CLEANING UNIT PROFILE\R\NTRACING FROM ABOVE, BOTTOM AND SIDE FOR CHAMFERING OR ROUNDING OF ROUGH MILLED PVC-EDGES. BLOWING NOZZLES ELECTROPNEUMATICAL CONTROLLED.\R\N\R\N1 PC. PVC-CHIP TEAR OFF TOP/BOTTOM FOR BETTER PVC-CHIP REMOVAL\R\N\R\N2 PCS. PNEUMATIC ADJUSTMENT RE-CLEANING PROFIL OPTIMAT\R\NFOR ELECTROPNEUMATICAL LATERAL MOVE OUT OF THE WORKING AREA.\R\N\R\N1 PC. RE-CLEANING DEVICE GLUED JOINT\R\NREMOVE OF GLUE RESTS IN THE AREA OF GLUED JOINT. TRACING FROM TOP AND BOTTOM.\R\N\R\N1 PC. PNEUMATIC ADJUSMENTS RE-CLEANING PROFIL OPTIMAT\R\NFOR ELECTROPNEUMATICAL LATERAL MOVE OUT OF THE WORKING AREA\R\N\R\N1 PC. BUFFING UNIT TOP AND BOTTOM WITH OSCILATING FOR MAKING THE EDGES HANDY.\R\N2 MOTORS EACH 0,25 KW, TILT AND HEIGHT ADJUSTABLE\R\N\R\NLIGMATECH WORKPIECE RETURN\R\NZHR 10/S LEFT HAND SIDE 9500 MM\R\N\R\NFOR EDGE BANDING MACHINE LEFT HAND SIDE, LENGTH APPROX. 9500 MM\R\NTHE WORKPIECE RETURN ZHR 10 ALLOWS THE ONE-MAN-OPERATION OF SINGLE SIDED THROUGHFEED MACHINES. WORKPIECES WHICH COME OUT OF THE MACHINE ARE TRANSPORTED TO A ROLLER CONVEYOR AND WILL BE CROSSWISE TRANSFERED VIA A DRIVEN V-BELT AND WILL BE RETURNED VIA A BELT AND A ROLLER TABLE.\R\N\R\NTHE OPTION TURNING PLUS TOP PRESSURE ALLOWS THE 90° TURN OF WORKPIECES COMING OUT OF THE MACHINE AND WILL BE LENGTHWISE RETURNED\R\N\R\NTHE FOLLOWING VERSION CONSISTS OF:\R\N- ROLLER CONVEYOR TR 10/42/22 WITH TAKEOVER V-BELTS OF THE KL\R\NTURNING PLATE WITH TURN SUPPORT, THICKNESS ADJUSTMENT MANUAL\R\NSMALL PARTS CONSTRUCTION SET IN FRONT OF CYCLE FENC
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 2.900 €
Ubicación: Land-brand: reichmann
type: esm
description: reichmann ski grinding machine is used. grinding wheel width 170 mm with feed and wet grinding device (pump + water base). machine is located in a very clean condition. the operating instruction sheet is included.
shipping charges possible.

: �2.900,00 ⧠25a differential taxation (no vat id possible!)

87742 apfeltrach, visit is at any time possible and desirable, for questions, andreas wiã?miller is available under the following telephone number: 0160/8037872 at your disposal. 
the goods are sold as seen and tested exclusively for commercial purposes, without any guarantee and warranty! 
 BRAND: REICHMANN TYPE: ESM DESCRIPTION: REICHMANN SKI GRINDING MACHINE IS USED. GRINDING WHEEL WIDTH 170 MM WITH FEED AND WET GRINDING DEVICE (PUMP + WATER BASE). MACHINE IS LOCATED IN A VERY CLEAN CONDITION. THE OPERATING INSTRUCTION SHEET IS INCLUDED. SHIPPING CHARGES POSSIBLE. : &ACIRC;?&NOT;2.900,00 &ACIRC;&SECT; 25A DIFFERENTIAL TAXATION (NO VAT ID POSSIBLE!) 87742 APFELTRACH, VISIT IS AT ANY TIME POSSIBLE AND DESIRABLE, FOR QUESTIONS, ANDREAS WI&ATILDE;?MILLER IS AVAILABLE UNDER THE FOLLOWING TELEPHONE NUMBER: 0160/8037872 AT YOUR DISPOSAL. THE GOODS ARE SOLD AS SEEN AND TESTED EXCLUSIVELY FOR COMMERCIAL PURPOSES, WITHOUT ANY GUARANTEE AND WARRANTY!
Vendedor: AW Handels GmbH
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 1.000 mm<br/>gear width: 800 mm<br/>max. module: 18 <br/>min. module: 14 <br/>control: liebherr cnc <br/>min. number of teeth: 6 <br/>max. helix angle: +/- 50 °<br/>max. workpiece weight: 5.000 kg<br/>axial adjustment: 800 mm<br/>table diameter: 710 mm<br/>table bore diameter: 180 mm<br/>max. milling cutter diameter: 240 mm<br/>cutter length max.: 300 mm<br/>shifting: 200 mm<br/>milling tool taper: iso 50 <br/>feeds axial: 0,1 - 20 mm/wu<br/>tangential feed: 0,01 - 5 mm/wu<br/>radial feed: 0,1 - 4 mm/wu<br/>rapid traverse ( x / y / z ): 2 / 3 / 1 m/min<br/>total power requirement: 59 kva<br/>weight of the machine ca.: 16,0 t<br/>dimensions of the machine ca.: 7,0 x 3,5 x 4,0 m<br/>switch-on hours: 68.000 h<br/>accessories:<br/>tool cabinets<br/>miller<br/>milling arbors diameter 32/40/50<br/>device<br/>chip tranport<br/><br/><br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 1.000 MM
GEAR WIDTH: 800 MM
MAX. MODULE: 18
MIN. MODULE: 14
CONTROL: LIEBHERR CNC
MIN. NUMBER OF TEETH: 6
MAX. HELIX ANGLE: +/- 50 °
MAX. WORKPIECE WEIGHT: 5.000 KG
AXIAL ADJUSTMENT: 800 MM
TABLE DIAMETER: 710 MM
TABLE BORE DIAMETER: 180 MM
MAX. MILLING CUTTER DIAMETER: 240 MM
CUTTER LENGTH MAX.: 300 MM
SHIFTING: 200 MM
MILLING TOOL TAPER: ISO 50
FEEDS AXIAL: 0,1 - 20 MM/WU
TANGENTIAL FEED: 0,01 - 5 MM/WU
RADIAL FEED: 0,1 - 4 MM/WU
RAPID TRAVERSE ( X / Y / Z ): 2 / 3 / 1 M/MIN
TOTAL POWER REQUIREMENT: 59 KVA
WEIGHT OF THE MACHINE CA.: 16,0 T
DIMENSIONS OF THE MACHINE CA.: 7,0 X 3,5 X 4,0 M
SWITCH-ON HOURS: 68.000 H
ACCESSORIES:
TOOL CABINETS
MILLER
MILLING ARBORS DIAMETER 32/40/50
DEVICE
CHIP TRANPORT






Vendedor: Gromag AG
Año de construcción: usado
Ubicación: Land-four colours sheet-fed offset press miller tp104-4,
year: 1987
impression count: 63 mio.
max speed 13000 s/h max paper size 720x1040mm min paper size 360x520mm., perfecting 2/2, 4/0
equipment: unimatic c3 ink- and register remote control
quick action plate clamps
millermatic dampening
baldwin refrigeration
ir dryer
register system
weko  powder spray
machine in production
available: immediately
 FOUR COLOURS SHEET-FED OFFSET PRESS MILLER TP104-4, YEAR: 1987 IMPRESSION COUNT: 63 MIO. MAX SPEED 13000 S/H MAX PAPER SIZE 720X1040MM MIN PAPER SIZE 360X520MM., PERFECTING 2/2, 4/0 EQUIPMENT: UNIMATIC C3 INK- AND REGISTER REMOTE CONTROL QUICK ACTION PLATE CLAMPS MILLERMATIC DAMPENING BALDWIN REFRIGERATION IR DRYER REGISTER SYSTEM WEKO POWDER SPRAY MACHINE IN PRODUCTION AVAILABLE: IMMEDIATELY
Vendedor: STAMPAIPAPIR DOO
Año de construcción: usado
Ubicación: Land-x-travel: 150 mm<br/>y-travel: 300 mm<br/>z-travel: 350 mm<br/>work table:: 350 x 200 mm<br/>template table: 450 x 320 <br/>ratio of pantograph: 1:10 - 1:1,5 <br/>spindle turning speed range: 475 - 9500 u/min<br/>total power requirement: 0,55 kw<br/>weight of the machine ca.: 0,45 t<br/>dimensions of the machine ca.: 1,25 x 1,04 x 1,5 m<br/>**engraving + profil milling machine**<br/>including fixing block for milling along crack, follower and miller, guiding lineal,<br/>3 set of lettering stencil, oposit support, tool cabinet<br/><br/><br/><br/> X-TRAVEL: 150 MM
Y-TRAVEL: 300 MM
Z-TRAVEL: 350 MM
WORK TABLE:: 350 X 200 MM
TEMPLATE TABLE: 450 X 320
RATIO OF PANTOGRAPH: 1:10 - 1:1,5
SPINDLE TURNING SPEED RANGE: 475 - 9500 U/MIN
TOTAL POWER REQUIREMENT: 0,55 KW
WEIGHT OF THE MACHINE CA.: 0,45 T
DIMENSIONS OF THE MACHINE CA.: 1,25 X 1,04 X 1,5 M
**ENGRAVING + PROFIL MILLING MACHINE**
INCLUDING FIXING BLOCK FOR MILLING ALONG CRACK, FOLLOWER AND MILLER, GUIDING LINEAL,
3 SET OF LETTERING STENCIL, OPOSIT SUPPORT, TOOL CABINET



Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-dro- acu rite ii (3-axis)
multi-function machine with an elevating headstock.
it could double as a screwcutting lathe or as a simple horizontal stub miller and borer.
for turning and milling. 
spindle head vertical adjustment. 
center height 125 mm ( 70-230 mm) 
dist.betw.centers 550 mm 
spindle speeds 50-3000 rpm. 
travels z/x - 350/100 mm
 DRO- ACU RITE II (3-AXIS) MULTI-FUNCTION MACHINE WITH AN ELEVATING HEADSTOCK. IT COULD DOUBLE AS A SCREWCUTTING LATHE OR AS A SIMPLE HORIZONTAL STUB MILLER AND BORER. FOR TURNING AND MILLING. SPINDLE HEAD VERTICAL ADJUSTMENT. CENTER HEIGHT 125 MM ( 70-230 MM) DIST.BETW.CENTERS 550 MM SPINDLE SPEEDS 50-3000 RPM. TRAVELS Z/X - 350/100 MM
Vendedor: MachTechnica Ltd.
Año de construcción: usado
Ubicación: Land-<br>table length: 3000 mm<br>table width: 1000 mm<br>longitudinal x: 2709 mm<br>cross y: 1212 mm<br>vertical z: 1501 mm<br>positions atc: 40  <br>cnc brand: heidenhain<br>cnc model: tnc 426 <br><p>make zayer kfu 3 </p>
<p>type 20 kfu 3000</p>
<p>year 1995</p>
<p>zayer kfu with tnc 426 bedmiller bedfreesmachine</p>
<p>table length (mm) l = 3.000</p>
<p>table width (mm)w = 1.000</p>
<p>longitudinal x (mm)x = 2.709</p>
<p>cross y (mm)y = 1.212</p>
<p>vertical z (mm)z = 1.501</p>
<p>cnc heidenhain tnc 426</p>
<p>iso 50 / 1800 / 22 kwatc chain 40 positionsnc hor. / vert 2 positions</p>
<p>
TABLE LENGTH: 3000 MM
TABLE WIDTH: 1000 MM
LONGITUDINAL X: 2709 MM
CROSS Y: 1212 MM
VERTICAL Z: 1501 MM
POSITIONS ATC: 40  
CNC BRAND: HEIDENHAIN
CNC MODEL: TNC 426

MAKE ZAYER KFU 3

TYPE 20 KFU 3000

YEAR 1995

ZAYER KFU WITH TNC 426 BEDMILLER BEDFREESMACHINE

TABLE LENGTH (MM) L = 3.000

TABLE WIDTH (MM)W = 1.000

LONGITUDINAL X (MM)X = 2.709

CROSS Y (MM)Y = 1.212

VERTICAL Z (MM)Z = 1.501

CNC HEIDENHAIN TNC 426

ISO 50 / 1800 / 22 KWATC CHAIN 40 POSITIONSNC HOR. / VERT 2 POSITIONS

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-single-clamp binder, paper max. 400 g/m2, miller, touchscreen, size min. 120x120 mm, max. 420x360 mm, thickness 2–50 mm, cover min. 120x240 mm, max. 425x780 mm, gluing system - saddle pur + side eva hotmelt, output up to 200 pc/hour, SINGLE-CLAMP BINDER, PAPER MAX. 400 G/M2, MILLER, TOUCHSCREEN, SIZE MIN. 120X120 MM, MAX. 420X360 MM, THICKNESS 2–50 MM, COVER MIN. 120X240 MM, MAX. 425X780 MM, GLUING SYSTEM - SADDLE PUR + SIDE EVA HOTMELT, OUTPUT UP TO 200 PC/HOUR,
Vendedor: Hagel s.r.o.
Año de construcción: usado
Ubicación: Land-automotive part production line

(radiator/ condenser / heater / evaporator )


1.fin production machine

 make:dongsung(korean)

 year;2005

 equipment size:4,700(l)x1,100(w)x1,590(h)mm 


 cap':condenser 8mm(h)x16mm(l)

 evaporator 9mm(h)x72/88mm(l)

 heater 6.8(h)mmx420mm(l)

 main :380v 60hz

 main motor:3.7kw



2.dryer

make:hankook(korean)

 year;2005

 size:2,600x2,000x2,000(h)mm

 cap':200?

 
3. blast cleaning

 make:hankook(korean)

 year;2005

 size:1,300x840x2,000(h)mm 

 

4.ultra sonic cleaner

make:greensonic(korean)

4- bath automatic cleaner

 1 bath:dipping-ultra sonic equipment x 2units and heater

 2bath:cleaning-ultra sonic equipment x 2units and heater

 3 bath:rinser

 4 bath: steam dry and heater



5.dipping machine

 make:han(korean)

 year:2005



6.press

 make:dongshin(korean)

 year:2003

 model:ds-200p

 cap':200ton

 stroke:250mm

 

7.evapowrator assembling machine x2 sets

 make:kohan(korean)

 year:2005

 working table:750x1,000mm

 
8.heater assembling machine x1set

 make:kohan(korean)

 year:2005

 working table:950x1,200mm

 
9.continous type al brazing furnace 

 make:haekang(korean)

 year:2006

 flux spray part

 fan:3kw 2p

 
10.continous type al brazing furnace

 make:sfc(korean)

 year:2010 

 cap':blazing time 23min

 -flux spray part

 agitator 0.4kw, sus

 pump:0.4kw

 flux tank:700kg 2ea

 fan:3kw

 drive motor:1.5kw

 reduction gear:kvm130, 1/500

 -dryer part

 fan:250nm3/min x 40mmaq

 byonet heater 18ea, 108kw

 mesh belt:915x12,000mm, sus

 main drum:Ø400x1,000mm

 coating 25t(rubber)

 roller:Ø400x1,100mm

 weight roller:Ø300x1,100mm

 dle roller:Ø200x1,100mm

 takeuop roller:Ø125x1,100mm

 cap':270kw(7part)

 mesh belt:915x48,000mm, sus

 -cooling(air, water) part










11.condenser core builder 

 make:dumori(korean) 

 year:2010

 .length:500~650mm

 .lane:28~35 lanes

 .tube:2.0t x 20mm

 .cycle time:36sec/each(57cut-572mm)

 .max.core:450x650x16h

 .tube size:18~26 x 2.0t

 .tube/fin arrange:metrix type






12.condenser fin miller

 make:dst(korean)

 year:2010

 .fin height:8.0±0.02mm

 .fin width:16mm

 .fin density:pitch 2.0p ~ 4.0p

 .fin length:200~800mm

 .louver angle:25±2?

.workpiece material:a4045-3003-4045

 .thickness:0.8±0.005

 .forming speed:18,000/min.

 .cutting:80cut/min.

 .cutting:adjustable

 .pitch control:

 by pitch adjustable roll change






13.heat core builder 

 make:dumori(korean) 

 year:2010

 .tube length:150~200

 .tube width:2.0h x 18~26w

 .cycle time:60sec/each(194l x 22row x 42h)

 .max.core:194x188x42h

 .tube size:18~26 x 2.0t

 .tube size:150~200mm

 .tube/fin arrangement:metrix type






14.helium leak tester 

 make:woosung(korean)

 year:2012 

 .he chamber type leak tester

 (with he recovery)

 1)cycle time:less than 70sec (2 chamber)

 2)he recovery system

 3)he recovery :95%

 4)air pressure test:40kg/?

5)he charge:15kg/?

6)leak rate:1 x 10-9pa m3/sec



 1)frame & chamber system

 1.1 chamber 2sets

 -dimension:1300(w)x900(d)x300(h)

 -front door

 -material:sus304

 -pumping port:3~

 -gauge port:nw25

 -view port:4~

 -sensor port:2~

 -door open close:pneumatic 1.2frame & cover

 -dimension:4800(w)x3200(d)x2600(h)

 -material:ss41painting

 -cover & window

 -safety inter lock

 -he recovery frame



 2)vacuum pump system

 2.1 oil rotary 3sets

 -model:mvp-216

-pumping speed:3600?/min

 -pressure:0.005torr

 -power:220/380v, 5.5kw

 -oil mist trap

 2.2 oil rotary 3sets

 -model:trep-36

-pumping speed:600?/min

 -pressure:0.005torr

 -pressure:0.005torr

 -oil mist trap

 2.3 oil rotary 2sets

 -model:trp-6

-pumping speed:100?/min

 -power:220/380v, 0.4kw

 -oil mist trap

 2.4 booster pump 1set

 -model:wsbp-300

-pumping speed:1200?/h

 -power:220/380v, 3.7kw

 2.5 booster pump 1set

 -model:mbs-050

-pumping speed:60?/h

 -power:220v, 0.3kw

 2.6 booster pump frame 2sets

 -frame:al profile

 -adapter flange

 -bellows



 3)2.7 high compressure leak detector & gauge

 1.1 leak detector

 -model:asm140alcatel

 1.2 vacuum gauge

 -range:760~10-3torr

 -digital controller

 1.3 he gas analyzer

 1.4 pressure gauge

-range:1-1kg/?

-range:1~20kf/?



4)valve & piping & tank

 -vaccum valve:3~, nw40, nw25

 -gas valve:1r~, 3/8~

-gas filter:0.1?1/4 

 -vaccum line:3~, 1~

 -gas line:1~,3/8~

-requlator:3/8~, 1~30kg/?



-he storage tank:150?

-he surge tank:100?

-line requlator

-safety valve:1?

-check valve:1~, 3/8~, 1/4~

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567


 AUTOMOTIVE PART PRODUCTION LINE (RADIATOR/ CONDENSER / HEATER / EVAPORATOR ) 1.FIN PRODUCTION MACHINE MAKE:DONGSUNG(KOREAN) YEAR;2005 EQUIPMENT SIZE:4,700(L)X1,100(W)X1,590(H)MM CAP':CONDENSER 8MM(H)X16MM(L) EVAPORATOR 9MM(H)X72/88MM(L) HEATER 6.8(H)MMX420MM(L) MAIN :380V 60HZ MAIN MOTOR:3.7KW 2.DRYER MAKE:HANKOOK(KOREAN) YEAR;2005 SIZE:2,600X2,000X2,000(H)MM CAP':200? 3. BLAST CLEANING MAKE:HANKOOK(KOREAN) YEAR;2005 SIZE:1,300X840X2,000(H)MM 4.ULTRA SONIC CLEANER MAKE:GREENSONIC(KOREAN) 4- BATH AUTOMATIC CLEANER 1 BATH:DIPPING-ULTRA SONIC EQUIPMENT X 2UNITS AND HEATER 2BATH:CLEANING-ULTRA SONIC EQUIPMENT X 2UNITS AND HEATER 3 BATH:RINSER 4 BATH: STEAM DRY AND HEATER 5.DIPPING MACHINE MAKE:HAN(KOREAN) YEAR:2005 6.PRESS MAKE:DONGSHIN(KOREAN) YEAR:2003 MODEL:DS-200P CAP':200TON STROKE:250MM 7.EVAPOWRATOR ASSEMBLING MACHINE X2 SETS MAKE:KOHAN(KOREAN) YEAR:2005 WORKING TABLE:750X1,000MM 8.HEATER ASSEMBLING MACHINE X1SET MAKE:KOHAN(KOREAN) YEAR:2005 WORKING TABLE:950X1,200MM 9.CONTINOUS TYPE AL BRAZING FURNACE MAKE:HAEKANG(KOREAN) YEAR:2006 FLUX SPRAY PART FAN:3KW 2P 10.CONTINOUS TYPE AL BRAZING FURNACE MAKE:SFC(KOREAN) YEAR:2010 CAP':BLAZING TIME 23MIN -FLUX SPRAY PART AGITATOR 0.4KW, SUS PUMP:0.4KW FLUX TANK:700KG 2EA FAN:3KW DRIVE MOTOR:1.5KW REDUCTION GEAR:KVM130, 1/500 -DRYER PART FAN:250NM3/MIN X 40MMAQ BYONET HEATER 18EA, 108KW MESH BELT:915X12,000MM, SUS MAIN DRUM:Ø400X1,000MM COATING 25T(RUBBER) ROLLER:Ø400X1,100MM WEIGHT ROLLER:Ø300X1,100MM DLE ROLLER:Ø200X1,100MM TAKEUOP ROLLER:Ø125X1,100MM CAP':270KW(7PART) MESH BELT:915X48,000MM, SUS -COOLING(AIR, WATER) PART 11.CONDENSER CORE BUILDER MAKE:DUMORI(KOREAN) YEAR:2010 .LENGTH:500~650MM .LANE:28~35 LANES .TUBE:2.0T X 20MM .CYCLE TIME:36SEC/EACH(57CUT-572MM) .MAX.CORE:450X650X16H .TUBE SIZE:18~26 X 2.0T .TUBE/FIN ARRANGE:METRIX TYPE 12.CONDENSER FIN MILLER MAKE:DST(KOREAN) YEAR:2010 .FIN HEIGHT:8.0±0.02MM .FIN WIDTH:16MM .FIN DENSITY:PITCH 2.0P ~ 4.0P .FIN LENGTH:200~800MM .LOUVER ANGLE:25±2? .WORKPIECE MATERIAL:A4045-3003-4045 .THICKNESS:0.8±0.005 .FORMING SPEED:18,000/MIN. .CUTTING:80CUT/MIN. .CUTTING:ADJUSTABLE .PITCH CONTROL: BY PITCH ADJUSTABLE ROLL CHANGE 13.HEAT CORE BUILDER MAKE:DUMORI(KOREAN) YEAR:2010 .TUBE LENGTH:150~200 .TUBE WIDTH:2.0H X 18~26W .CYCLE TIME:60SEC/EACH(194L X 22ROW X 42H) .MAX.CORE:194X188X42H .TUBE SIZE:18~26 X 2.0T .TUBE SIZE:150~200MM .TUBE/FIN ARRANGEMENT:METRIX TYPE 14.HELIUM LEAK TESTER MAKE:WOOSUNG(KOREAN) YEAR:2012 .HE CHAMBER TYPE LEAK TESTER (WITH HE RECOVERY) 1)CYCLE TIME:LESS THAN 70SEC (2 CHAMBER) 2)HE RECOVERY SYSTEM 3)HE RECOVERY :95% 4)AIR PRESSURE TEST:40KG/? 5)HE CHARGE:15KG/? 6)LEAK RATE:1 X 10-9PA M3/SEC 1)FRAME & CHAMBER SYSTEM 1.1 CHAMBER 2SETS -DIMENSION:1300(W)X900(D)X300(H) -FRONT DOOR -MATERIAL:SUS304 -PUMPING PORT:3~ -GAUGE PORT:NW25 -VIEW PORT:4~ -SENSOR PORT:2~ -DOOR OPEN CLOSE:PNEUMATIC 1.2FRAME & COVER -DIMENSION:4800(W)X3200(D)X2600(H) -MATERIAL:SS41PAINTING -COVER & WINDOW -SAFETY INTER LOCK -HE RECOVERY FRAME 2)VACUUM PUMP SYSTEM 2.1 OIL ROTARY 3SETS -MODEL:MVP-216 -PUMPING SPEED:3600?/MIN -PRESSURE:0.005TORR -POWER:220/380V, 5.5KW -OIL MIST TRAP 2.2 OIL ROTARY 3SETS -MODEL:TREP-36 -PUMPING SPEED:600?/MIN -PRESSURE:0.005TORR -PRESSURE:0.005TORR -OIL MIST TRAP 2.3 OIL ROTARY 2SETS -MODEL:TRP-6 -PUMPING SPEED:100?/MIN -POWER:220/380V, 0.4KW -OIL MIST TRAP 2.4 BOOSTER PUMP 1SET -MODEL:WSBP-300 -PUMPING SPEED:1200?/H -POWER:220/380V, 3.7KW 2.5 BOOSTER PUMP 1SET -MODEL:MBS-050 -PUMPING SPEED:60?/H -POWER:220V, 0.3KW 2.6 BOOSTER PUMP FRAME 2SETS -FRAME:AL PROFILE -ADAPTER FLANGE -BELLOWS 3)2.7 HIGH COMPRESSURE LEAK DETECTOR & GAUGE 1.1 LEAK DETECTOR -MODEL:ASM140ALCATEL 1.2 VACUUM GAUGE -RANGE:760~10-3TORR -DIGITAL CONTROLLER 1.3 HE GAS ANALYZER 1.4 PRESSURE GAUGE -RANGE:1-1KG/? -RANGE:1~20KF/? 4)VALVE & PIPING & TANK -VACCUM VALVE:3~, NW40, NW25 -GAS VALVE:1R~, 3/8~ -GAS FILTER:0.1?1/4 -VACCUM LINE:3~, 1~ -GAS LINE:1~,3/8~ -REQULATOR:3/8~, 1~30KG/? -HE STORAGE TANK:150? -HE SURGE TANK:100? -LINE REQULATOR -SAFETY VALVE:1? -CHECK VALVE:1~, 3/8~, 1/4~ BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-code: 0134
brand: cem
model: f 415 / 3000 - ce standard 

working center with numerical control with 3 controlled axis - ce standard - year 2006

technical data:

max longitudinal stroke axis x mm 3000
transversal stroke axis y mm 1000
max height mm 65
boring group : max transversal stroke axis y mm 1000 - pump m3 50 - miller hp 5,5 24.000 turns
saw group for longitudinal cutting - programmer ec 8000
overall dimensions : mm 4000 x 1500 x 2400 h - weight kg 1500


 CODE: 0134 BRAND: CEM MODEL: F 415 / 3000 - CE STANDARD WORKING CENTER WITH NUMERICAL CONTROL WITH 3 CONTROLLED AXIS - CE STANDARD - YEAR 2006 TECHNICAL DATA: MAX LONGITUDINAL STROKE AXIS X MM 3000 TRANSVERSAL STROKE AXIS Y MM 1000 MAX HEIGHT MM 65 BORING GROUP : MAX TRANSVERSAL STROKE AXIS Y MM 1000 - PUMP M3 50 - MILLER HP 5,5 24.000 TURNS SAW GROUP FOR LONGITUDINAL CUTTING - PROGRAMMER EC 8000 OVERALL DIMENSIONS : MM 4000 X 1500 X 2400 H - WEIGHT KG 1500
Vendedor: TOMESANI Srl
Año de construcción: usado
Precio: 30.000 €
Ubicación: Land-- five colours size 72x104 cms. with 1+4 or 5/0 
- year 1990,alcotron dampening with baldwin refrigeration system, ir dryer 
- unimatic c 3 table control, quick clamps, 73 mil. copies, weko t77 powder spray, all parts and accessories 
-double sheet control, all manuals and electric diagrams 
-can be seen in production italy, available immediately, in nice conditions
 - FIVE COLOURS SIZE 72X104 CMS. WITH 1+4 OR 5/0 - YEAR 1990,ALCOTRON DAMPENING WITH BALDWIN REFRIGERATION SYSTEM, IR DRYER - UNIMATIC C 3 TABLE CONTROL, QUICK CLAMPS, 73 MIL. COPIES, WEKO T77 POWDER SPRAY, ALL PARTS AND ACCESSORIES -DOUBLE SHEET CONTROL, ALL MANUALS AND ELECTRIC DIAGRAMS -CAN BE SEEN IN PRODUCTION ITALY, AVAILABLE IMMEDIATELY, IN NICE CONDITIONS
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Ubicación: Land-used spindle moulder from a carpenter's shop
manufacturer: unknown
miller collet 30 mm
the machine is already very old, but very quiet and powerful runs.

the holzher four roller feed is to operate only with 2 wheels.

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  USED SPINDLE MOULDER FROM A CARPENTER'S SHOP MANUFACTURER: UNKNOWN MILLER COLLET 30 MM THE MACHINE IS ALREADY VERY OLD, BUT VERY QUIET AND POWERFUL RUNS. THE HOLZHER FOUR ROLLER FEED IS TO OPERATE ONLY WITH 2 WHEELS. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-type of machine: table miller with swiveling milling spindle,
manufacturer: kity,
model: 629,
year of construction: 1996
condition: very good,.
type of offer: used machine,
  ,
specifications:,.
table: 710 x 570 mm,
speed: 4800/6400/8700 rpm,.
milling spindle diameter: 30 mm,
comment:.
with swivelling milling spindle.
chip extraction,
a lot of accessories and tools,
weight: 120 kg
  ,
the machine is in a very good shape and ready for operation. it can be visited an demonstrated at our location.,
 ,
we will be pleased if you take an interest in our offer,.
  TYPE OF MACHINE: TABLE MILLER WITH SWIVELING MILLING SPINDLE, MANUFACTURER: KITY, MODEL: 629, YEAR OF CONSTRUCTION: 1996 CONDITION: VERY GOOD,. TYPE OF OFFER: USED MACHINE, , SPECIFICATIONS:,. TABLE: 710 X 570 MM, SPEED: 4800/6400/8700 RPM,. MILLING SPINDLE DIAMETER: 30 MM, COMMENT:. WITH SWIVELLING MILLING SPINDLE. CHIP EXTRACTION, A LOT OF ACCESSORIES AND TOOLS, WEIGHT: 120 KG , THE MACHINE IS IN A VERY GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AN DEMONSTRATED AT OUR LOCATION., , WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-perfecting machine 2/0 1/1
miller tp 74 2 colours
standard dampening
cooling unit cremoplast
quick action clamp
grafix powder PERFECTING MACHINE 2/0 1/1 MILLER TP 74 2 COLOURS STANDARD DAMPENING COOLING UNIT CREMOPLAST QUICK ACTION CLAMP GRAFIX POWDER
Vendedor: Tecnoffset S.r.l.
Año de construcción: usado
Ubicación: Land-two colours

perfector: 1/1

year: 1989

29 millions of impressions

the machine is already dismantled..

 TWO COLOURS PERFECTOR: 1/1 YEAR: 1989 29 MILLIONS OF IMPRESSIONS THE MACHINE IS ALREADY DISMANTLED..
Vendedor: LUFIGRAF
Año de construcción: usado
Precio: 7.000 €
Ubicación: Land-description
brand	miller
model	tp29s
id	7224
status	active
price	7.000 € + vat
location	buz?u (ro)

offset printing machine 2 colors miller tp29s. format: 50 x 70 cm, with 2 color groups. molleton dampening system with circulation pump. doesn't require an air compressor. maximum speed: 13 000 sheets/h. 

exwork. price is negotiable. 

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila. DESCRIPTION BRAND MILLER MODEL TP29S ID 7224 STATUS ACTIVE PRICE 7.000 € + VAT LOCATION BUZ?U (RO) OFFSET PRINTING MACHINE 2 COLORS MILLER TP29S. FORMAT: 50 X 70 CM, WITH 2 COLOR GROUPS. MOLLETON DAMPENING SYSTEM WITH CIRCULATION PUMP. DOESN'T REQUIRE AN AIR COMPRESSOR. MAXIMUM SPEED: 13 000 SHEETS/H. EXWORK. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Precio: 18.000 €
Ubicación: Land-description
brand	miller
model	tp 74-4
id	7223
status	active
price	18.000 € + vat
location	buz?u (ro)

offset printing machine 4 colors miller tp 74 - 4, format: 50 x 70 cm with 2/2 or 4/0. alcotron dampening system with baldwin's cooling and re-circulation unit system, quick action plate clamps, unimatic c3 table control, spiess feeder. 

exworks. price is negotiable. 

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila. DESCRIPTION BRAND MILLER MODEL TP 74-4 ID 7223 STATUS ACTIVE PRICE 18.000 € + VAT LOCATION BUZ?U (RO) OFFSET PRINTING MACHINE 4 COLORS MILLER TP 74 - 4, FORMAT: 50 X 70 CM WITH 2/2 OR 4/0. ALCOTRON DAMPENING SYSTEM WITH BALDWIN'S COOLING AND RE-CIRCULATION UNIT SYSTEM, QUICK ACTION PLATE CLAMPS, UNIMATIC C3 TABLE CONTROL, SPIESS FEEDER. EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Ubicación: Land-
automobile parts(heater/fin/condensor/evaporator)

manufacturing line

 

2 . fin manufacturing equipment

make:dongsung(korea)

year:2005

size:4,700(l)x1,100(w)x1,590(h)mm

cap':condenser 8mm(h)x16mm(l)

        evaporator 9mm(h)x72/88mm(l)

        heater 6.8(h)mmx420mm(l)

   main eelectric:380v 60hz

   main motor:3.7kw

   feeder: 1ea

   fin guide ass'y motor:1.5kw

   feed roller ass'y

     air tensioner ass'y cylinder:cq2850

   forming stand ass'y h005hb

   packing stand ass'y h005hb

make:hankook(korea)



4.blast cleaning equipment

make:korea blast

year:2005


5.ultrasonic cleaner

make:greensonic

year:2006

 

6.dipping machine

7.press

make:dongshin(korea)

year:2003

cap':200ton

8.evaporator manufactuting equipment

9.heater builder

make:hankook(korea)

year:2005

table:950x1,200mm

 

10.continous type al brazing furnace

make:haekangro(korea)

year:2006

11.continous type al brazing furnace

make:sfc(korea)

year:2010

12.condenser core builder

make:dumori m&t(korea)

year:2010

.length:500~650mm

   .lanes:28~35

   .tube:2.0t x 20mm

 .cycle time:36sec

 

  13.condenser fin miller

make:dst(korea)

yer:2010

.fin height:8.0±0.02mm

   .fin width:16mm

   .fin density:pitch 2.0p ~ 4.0p

   .fin length:200~800mm


  15.helium leak test

make:woosung(korea)

year:2012

1.1 chamber 2sets

   
   1.1 leak detector

   -model:asm140alcatel

   1.2 vacuum gauge

   -range:760~10-3torr

   -digital controller

   1.3 he gas analyzer

   1.4 pressure gauge

   -range:1-1kg/?

   -range:1~20kf/?

      4)valve & piping & tank

   -vaccum valve:3~, nw40, nw25

   -gas valve:1r~, 3/8~

   -gas filter:0.1?1/4

   -vaccum line:3~, 1~

   -gas line:1~,3/8~

   -requlator:3/8~, 1~30kg/?
bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567    

 AUTOMOBILE PARTS(HEATER/FIN/CONDENSOR/EVAPORATOR) MANUFACTURING LINE 2 . FIN MANUFACTURING EQUIPMENT MAKE:DONGSUNG(KOREA) YEAR:2005 SIZE:4,700(L)X1,100(W)X1,590(H)MM CAP':CONDENSER 8MM(H)X16MM(L) EVAPORATOR 9MM(H)X72/88MM(L) HEATER 6.8(H)MMX420MM(L) MAIN EELECTRIC:380V 60HZ MAIN MOTOR:3.7KW FEEDER: 1EA FIN GUIDE ASS'Y MOTOR:1.5KW FEED ROLLER ASS'Y AIR TENSIONER ASS'Y CYLINDER:CQ2850 FORMING STAND ASS'Y H005HB PACKING STAND ASS'Y H005HB MAKE:HANKOOK(KOREA) 4.BLAST CLEANING EQUIPMENT MAKE:KOREA BLAST YEAR:2005 5.ULTRASONIC CLEANER MAKE:GREENSONIC YEAR:2006 6.DIPPING MACHINE 7.PRESS MAKE:DONGSHIN(KOREA) YEAR:2003 CAP':200TON 8.EVAPORATOR MANUFACTUTING EQUIPMENT 9.HEATER BUILDER MAKE:HANKOOK(KOREA) YEAR:2005 TABLE:950X1,200MM 10.CONTINOUS TYPE AL BRAZING FURNACE MAKE:HAEKANGRO(KOREA) YEAR:2006 11.CONTINOUS TYPE AL BRAZING FURNACE MAKE:SFC(KOREA) YEAR:2010 12.CONDENSER CORE BUILDER MAKE:DUMORI M&T(KOREA) YEAR:2010 .LENGTH:500~650MM .LANES:28~35 .TUBE:2.0T X 20MM .CYCLE TIME:36SEC 13.CONDENSER FIN MILLER MAKE:DST(KOREA) YER:2010 .FIN HEIGHT:8.0±0.02MM .FIN WIDTH:16MM .FIN DENSITY:PITCH 2.0P ~ 4.0P .FIN LENGTH:200~800MM 15.HELIUM LEAK TEST MAKE:WOOSUNG(KOREA) YEAR:2012 1.1 CHAMBER 2SETS 1.1 LEAK DETECTOR -MODEL:ASM140ALCATEL 1.2 VACUUM GAUGE -RANGE:760~10-3TORR -DIGITAL CONTROLLER 1.3 HE GAS ANALYZER 1.4 PRESSURE GAUGE -RANGE:1-1KG/? -RANGE:1~20KF/? 4)VALVE & PIPING & TANK -VACCUM VALVE:3~, NW40, NW25 -GAS VALVE:1R~, 3/8~ -GAS FILTER:0.1?1/4 -VACCUM LINE:3~, 1~ -GAS LINE:1~,3/8~ -REQULATOR:3/8~, 1~30KG/? BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-counter profile milling machine stegherr
type: kf

the workpiece is milled only also by one side in the opposite direction until about the middle of the workpiece, and then from the opposite side by the second cutter kit in the opposite direction until about mid

with a saw to cut of the profiles

engine power 2 x 1.1 kw
speed infinitely variable 0-160000 rpm. 
saw motor 1,5 kw/3000 rpm. 
saw blade diameter 250 mm tool diameter cutter of 70-105 mm pneumatic connection 6bar
dust nozzle diameter 150 mm dimensions width 1250 mm x 1300 mm deep x height 1200 mm (without saw) weight: 450 kg 
 COUNTER PROFILE MILLING MACHINE STEGHERR TYPE: KF THE WORKPIECE IS MILLED ONLY ALSO BY ONE SIDE IN THE OPPOSITE DIRECTION UNTIL ABOUT THE MIDDLE OF THE WORKPIECE, AND THEN FROM THE OPPOSITE SIDE BY THE SECOND CUTTER KIT IN THE OPPOSITE DIRECTION UNTIL ABOUT MID WITH A SAW TO CUT OF THE PROFILES ENGINE POWER 2 X 1.1 KW SPEED INFINITELY VARIABLE 0-160000 RPM. SAW MOTOR 1,5 KW/3000 RPM. SAW BLADE DIAMETER 250 MM TOOL DIAMETER CUTTER OF 70-105 MM PNEUMATIC CONNECTION 6BAR DUST NOZZLE DIAMETER 150 MM DIMENSIONS WIDTH 1250 MM X 1300 MM DEEP X HEIGHT 1200 MM (WITHOUT SAW) WEIGHT: 450 KG
Vendedor: FWB-Maschinenhandel GmbH
Año de construcción: usado
Precio: 22.000 
Ubicación: Land-5 colours
b2 size
cpc
new rollers on two sections
22000 euro loc 5 COLOURS B2 SIZE CPC NEW ROLLERS ON TWO SECTIONS 22000 EURO LOC
Vendedor: Graphotrade Ltd
Año de construcción: usado
Precio: 1.900 €
Ubicación: Land-double spindle milling helma cf40

copy milling machine helma
type: cf-40

table dimensions 700 x 1120 mm
diameter of 2 work spindles 30 mm
speed of work spindles 10500 rpm
max cutting height 100 mm
vertical adjustment of the cutter heads, or cutter profile correction 10 mm
maximum distance between the spindles from center to center 450 mm
maximum distance between the feed shaft from centre to centre 235 mm
spindle motors 2 x 5,5 kw
feed motor 0.37 kw
1.8 - 10 m/min stepless adjustable feed rates

1000 kg net weight of machine DOUBLE SPINDLE MILLING HELMA CF40 COPY MILLING MACHINE HELMA TYPE: CF-40 TABLE DIMENSIONS 700 X 1120 MM DIAMETER OF 2 WORK SPINDLES 30 MM SPEED OF WORK SPINDLES 10500 RPM MAX CUTTING HEIGHT 100 MM VERTICAL ADJUSTMENT OF THE CUTTER HEADS, OR CUTTER PROFILE CORRECTION 10 MM MAXIMUM DISTANCE BETWEEN THE SPINDLES FROM CENTER TO CENTER 450 MM MAXIMUM DISTANCE BETWEEN THE FEED SHAFT FROM CENTRE TO CENTRE 235 MM SPINDLE MOTORS 2 X 5,5 KW FEED MOTOR 0.37 KW 1.8 - 10 M/MIN STEPLESS ADJUSTABLE FEED RATES 1000 KG NET WEIGHT OF MACHINE
Vendedor: Chicagowood Malax
Año de construcción: usado
Ubicación: Land-code: n0156
brand: maco 2/l
model: c300

combined machine 
 
technical data

 
surface planer c300

table dimensions mm 300x1500
cutterblock diameter mm 70
cutterhead rotating speed g/m 5700
n° 3 knives
knives dimensions mm 300x20x3
max table adjustment mm 4


thicknessing machine c300

table dimensions mm 300x660
max cutting depth mm 5,5
feed speed m/min 7
max working height mm 220
min working height mm 4
cutterhead rotating speed rpm 5700


circular saw c300

table dimensions mm 220x1000
rotation speed  rpm 4500
blade diameter  250
blade bore diameter  30
max cutting height at 90° mm 80
max distance  between blade and fence mm 500
blade inclination 0° 45°
max cutting height at 45° mm 50
engraver blade diameter 90
engraver blade bore diameter 22
rotation speed rpm  7000


mortiser c300

table dimension mm 500x250
longitudinal stroke mm 205
trasversal stroke mm 95
vertical stroke mm 90
chuck diameter 16
chuck rotation speed rpm 5700


vertical miller c300

table dimensions mm 220x1000
rotation speed rpm 2000/3100/4400/ 7000
standard shaft diameter mm 30
spindle length mm 105
shaft vertical stroke mm 115
max tool diameter mm 160
max tenoning depth mm 55



  CODE: N0156 BRAND: MACO 2/L MODEL: C300 COMBINED MACHINE TECHNICAL DATA SURFACE PLANER C300 TABLE DIMENSIONS MM 300X1500 CUTTERBLOCK DIAMETER MM 70 CUTTERHEAD ROTATING SPEED G/M 5700 N° 3 KNIVES KNIVES DIMENSIONS MM 300X20X3 MAX TABLE ADJUSTMENT MM 4 THICKNESSING MACHINE C300 TABLE DIMENSIONS MM 300X660 MAX CUTTING DEPTH MM 5,5 FEED SPEED M/MIN 7 MAX WORKING HEIGHT MM 220 MIN WORKING HEIGHT MM 4 CUTTERHEAD ROTATING SPEED RPM 5700 CIRCULAR SAW C300 TABLE DIMENSIONS MM 220X1000 ROTATION SPEED RPM 4500 BLADE DIAMETER 250 BLADE BORE DIAMETER 30 MAX CUTTING HEIGHT AT 90° MM 80 MAX DISTANCE BETWEEN BLADE AND FENCE MM 500 BLADE INCLINATION 0° 45° MAX CUTTING HEIGHT AT 45° MM 50 ENGRAVER BLADE DIAMETER 90 ENGRAVER BLADE BORE DIAMETER 22 ROTATION SPEED RPM 7000 MORTISER C300 TABLE DIMENSION MM 500X250 LONGITUDINAL STROKE MM 205 TRASVERSAL STROKE MM 95 VERTICAL STROKE MM 90 CHUCK DIAMETER 16 CHUCK ROTATION SPEED RPM 5700 VERTICAL MILLER C300 TABLE DIMENSIONS MM 220X1000 ROTATION SPEED RPM 2000/3100/4400/ 7000 STANDARD SHAFT DIAMETER MM 30 SPINDLE LENGTH MM 105 SHAFT VERTICAL STROKE MM 115 MAX TOOL DIAMETER MM 160 MAX TENONING DEPTH MM 55
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-connected load: 5.5kw, power: 4000a, with welding head messer griesheim and power source miller deltaweld 852: voltage: 415v, current range: 50-850a, length: 585mm, width: 762mm, height: 966mm, weight: 214kg.  CONNECTED LOAD: 5.5KW, POWER: 4000A, WITH WELDING HEAD MESSER GRIESHEIM AND POWER SOURCE MILLER DELTAWELD 852: VOLTAGE: 415V, CURRENT RANGE: 50-850A, LENGTH: 585MM, WIDTH: 762MM, HEIGHT: 966MM, WEIGHT: 214KG.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-the modular milling and sanding machine has been designed to shape a solid wood edge in one processing step.<br><br>the machine can be set up according to customer requirements and equipped with any processing units.<br> <br>possibility to work with a groove cutting unit in trough feed system<br>smooth running because of very strong construction<br>easy to adjust and handle<br>automatic adjustment of the material thickness - the height adjustment of the down pressure beam is automatic according the feeler.<br> <br>- pre-milling unit, insert controlled, no feeler, for milling or grooving the front face<br>- sanding unit (electromotive oscillation, electromotive height adjustment to use the sanding belt complete in width, electro-pneumatic engage control)<br>- profile milling unit on top, with copy unit, for bevel or radius miller, quick change system<br>- profile milling unit on bottom, with copy unit, for bevel or radius miller, quick change system<br>- profile sanding unit on top with copy unit for bevel or radius miller, quick change system for sanding shoe, pneumatic insert control, no oscillation<br>- profile sanding unit on bottom with copy unit for bevel or radius miller, quick change system for sanding shoe, pneumatic insert control, no oscillation<br>- 2 x groove milling unit, without feeler<br><br><br>motor pre-miling unit 2,2 kw<br>motor sanding unit 2,2 kw<br>oszillation sanding unit 0,12 kw<br>height adjustment sanding unit 0,25 kw<br>profile milling unit top 0,75 kw<br>profile milling unit bottom 0,75 kw<br>profile sanding unit top 0,37 kw<br>profile sanding unit bottom 0,37 kw<br>grove unit 1 2,2 kw<br>groove unit 2 2,2 kw<br>feeder motor 2,2 kw<br>feed speed var. 5,2 - 18,5 m/ min<br>motor pressure beam height adjustment 0,37 kw<br>sanding belt length 2100 mm<br>sanding belt width 20 - 25 mm<br>max. sanding height 100 mm<br>min. sanding height 0 mm<br>min. work piece width 40 mm<br><br>suction connection 200 mm<br>total electric connectivity 15 kw<br>working pressure 6 bar<br><br>space requirement l x w = 7500 x 1100 mm<br>weight approx.. 2000 kg<br><br><br><br>advise used machines: <br><br>o technical data without obligation, mistake and intermediate sale reserve.<br>o price is considered ex-location price <br>o all articles or machines are bought as seen without any entitlement on warranty. <br>o it is left to the choice of the buyer to view the machines before at its location. <br>o special arrangements are possible but only valid in written form. <br><br>(we answer your inquiries only with stated address + telephone number!) <br><br>; very good, cleaned, serviced, function testedd THE MODULAR MILLING AND SANDING MACHINE HAS BEEN DESIGNED TO SHAPE A SOLID WOOD EDGE IN ONE PROCESSING STEP.

THE MACHINE CAN BE SET UP ACCORDING TO CUSTOMER REQUIREMENTS AND EQUIPPED WITH ANY PROCESSING UNITS.

POSSIBILITY TO WORK WITH A GROOVE CUTTING UNIT IN TROUGH FEED SYSTEM
SMOOTH RUNNING BECAUSE OF VERY STRONG CONSTRUCTION
EASY TO ADJUST AND HANDLE
AUTOMATIC ADJUSTMENT OF THE MATERIAL THICKNESS - THE HEIGHT ADJUSTMENT OF THE DOWN PRESSURE BEAM IS AUTOMATIC ACCORDING THE FEELER.

- PRE-MILLING UNIT, INSERT CONTROLLED, NO FEELER, FOR MILLING OR GROOVING THE FRONT FACE
- SANDING UNIT (ELECTROMOTIVE OSCILLATION, ELECTROMOTIVE HEIGHT ADJUSTMENT TO USE THE SANDING BELT COMPLETE IN WIDTH, ELECTRO-PNEUMATIC ENGAGE CONTROL)
- PROFILE MILLING UNIT ON TOP, WITH COPY UNIT, FOR BEVEL OR RADIUS MILLER, QUICK CHANGE SYSTEM
- PROFILE MILLING UNIT ON BOTTOM, WITH COPY UNIT, FOR BEVEL OR RADIUS MILLER, QUICK CHANGE SYSTEM
- PROFILE SANDING UNIT ON TOP WITH COPY UNIT FOR BEVEL OR RADIUS MILLER, QUICK CHANGE SYSTEM FOR SANDING SHOE, PNEUMATIC INSERT CONTROL, NO OSCILLATION
- PROFILE SANDING UNIT ON BOTTOM WITH COPY UNIT FOR BEVEL OR RADIUS MILLER, QUICK CHANGE SYSTEM FOR SANDING SHOE, PNEUMATIC INSERT CONTROL, NO OSCILLATION
- 2 X GROOVE MILLING UNIT, WITHOUT FEELER


MOTOR PRE-MILING UNIT 2,2 KW
MOTOR SANDING UNIT 2,2 KW
OSZILLATION SANDING UNIT 0,12 KW
HEIGHT ADJUSTMENT SANDING UNIT 0,25 KW
PROFILE MILLING UNIT TOP 0,75 KW
PROFILE MILLING UNIT BOTTOM 0,75 KW
PROFILE SANDING UNIT TOP 0,37 KW
PROFILE SANDING UNIT BOTTOM 0,37 KW
GROVE UNIT 1 2,2 KW
GROOVE UNIT 2 2,2 KW
FEEDER MOTOR 2,2 KW
FEED SPEED VAR. 5,2 - 18,5 M/ MIN
MOTOR PRESSURE BEAM HEIGHT ADJUSTMENT 0,37 KW
SANDING BELT LENGTH 2100 MM
SANDING BELT WIDTH 20 - 25 MM
MAX. SANDING HEIGHT 100 MM
MIN. SANDING HEIGHT 0 MM
MIN. WORK PIECE WIDTH 40 MM

SUCTION CONNECTION 200 MM
TOTAL ELECTRIC CONNECTIVITY 15 KW
WORKING PRESSURE 6 BAR

SPACE REQUIREMENT L X W = 7500 X 1100 MM
WEIGHT APPROX.. 2000 KG



ADVISE USED MACHINES:

O TECHNICAL DATA WITHOUT OBLIGATION, MISTAKE AND INTERMEDIATE SALE RESERVE.
O PRICE IS CONSIDERED EX-LOCATION PRICE
O ALL ARTICLES OR MACHINES ARE BOUGHT AS SEEN WITHOUT ANY ENTITLEMENT ON WARRANTY.
O IT IS LEFT TO THE CHOICE OF THE BUYER TO VIEW THE MACHINES BEFORE AT ITS LOCATION.
O SPECIAL ARRANGEMENTS ARE POSSIBLE BUT ONLY VALID IN WRITTEN FORM.

(WE ANSWER YOUR INQUIRIES ONLY WITH STATED ADDRESS + TELEPHONE NUMBER!)

; VERY GOOD, CLEANED, SERVICED, FUNCTION TESTEDD
Vendedor: PRATTES Maschinen-Handels GmbH
Año de construcción: usado
Ubicación: Land-router type scm r9 ROUTER TYPE SCM R9
Vendedor: IMALL
Año de construcción: usado
Precio: 980 €
Ubicación: Land-type: miller syncrowave 300 p
type: ac and dc mode
weight: 450kg
dimensions lxwxh: 1200x600x1450mm

accessories:
-torch for tig/wig welding
-electrode holder
-bulk cable
 TYPE: MILLER SYNCROWAVE 300 P TYPE: AC AND DC MODE WEIGHT: 450KG DIMENSIONS LXWXH: 1200X600X1450MM ACCESSORIES: -TORCH FOR TIG/WIG WELDING -ELECTRODE HOLDER -BULK CABLE
Vendedor: Ramsauer Maschinen AG
Año de construcción: usado
Ubicación: Land-alcolor dampening with baldwin ALCOLOR DAMPENING WITH BALDWIN
Vendedor: AGM Graphische Maschinen
Año de construcción: usado
Ubicación: Land-alcolor dampening ALCOLOR DAMPENING
Vendedor: AGM Graphische Maschinen
Año de construcción: usado
Ubicación: Land-1 gebr. cnc univ. tool room milling machine fabr. cover type fp 5nc, built in 1987
machine is under power!
additional control asher, cnc rotary table

contact mr. miller.
gu2nrs

see also our over 200 more offers! 1 GEBR. CNC UNIV. TOOL ROOM MILLING MACHINE FABR. COVER TYPE FP 5NC, BUILT IN 1987 MACHINE IS UNDER POWER! ADDITIONAL CONTROL ASHER, CNC ROTARY TABLE CONTACT MR. MILLER. GU2NRS SEE ALSO OUR OVER 200 MORE OFFERS!
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-qty.1 second-hand milling (scalping) line
mfc.:		torrington		type:	30 QTY.1 SECOND-HAND MILLING (SCALPING) LINE MFC.: TORRINGTON TYPE: 30" SLAP MILLER SPEED: 500 RPM – 18 FPM CAPACITY: 1,9 M/DK
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-universal miller / fresadora universal
model / modelo: correa f1ub
maquinas talleres luis alonso, s.l.
our reference: 4365
 UNIVERSAL MILLER / FRESADORA UNIVERSAL MODEL / MODELO: CORREA F1UB MAQUINAS TALLERES LUIS ALONSO, S.L. OUR REFERENCE: 4365
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-universal miller / fresadora universal

model / modelo: as/09-010

maquinas talleres luis alonso, s.l.

our reference: 4364 UNIVERSAL MILLER / FRESADORA UNIVERSAL MODEL / MODELO: AS/09-010 MAQUINAS TALLERES LUIS ALONSO, S.L. OUR REFERENCE: 4364
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-       
  
offer: 


 milling somad ps 400 cp milling somad ps 400 cp milling somad ps 400 cp  
   
  
manufacturer: 

milling somad ps 400 cp 
  
  
type: 

milling somad ps 400 cp 
  
  
year of construction: 

1988 
  
  
offertype: 

used machine offer  
  
  
location: 

poland 
  
        
  
technical data: 

location 

gorzow wielkopolski. 
conditions of delivery 

pick your own 
cost of delivery 

client cover 
startup type 

negotiated 
description 
comments 

carving sided with mechicznym feed, table header 

 400 mm. the machine is equipped pile grading and face 

cutter control of the desktop, has a smooth adjustments feed 

possibility of work cycle manual and automatic main engine 

5,5 kw motor saw grading 2.2 kw face and feed engine 1.2 kw 

clamps on the table automatically tighten detail pneumatically. fixing detail and 

the machine automatically releasing a very good stem diameter 35 mm 

height 180 mm depth milling cutting material saw 

saw cutting 140 mm.possibility milling the table angle 
 
  
      
    OFFER: MILLING SOMAD PS 400 CP MILLING SOMAD PS 400 CP MILLING SOMAD PS 400 CP MANUFACTURER: MILLING SOMAD PS 400 CP TYPE: MILLING SOMAD PS 400 CP YEAR OF CONSTRUCTION: 1988 OFFERTYPE: USED MACHINE OFFER LOCATION: POLAND TECHNICAL DATA: LOCATION GORZOW WIELKOPOLSKI. CONDITIONS OF DELIVERY PICK YOUR OWN COST OF DELIVERY CLIENT COVER STARTUP TYPE NEGOTIATED DESCRIPTION COMMENTS CARVING SIDED WITH MECHICZNYM FEED, TABLE HEADER 400 MM. THE MACHINE IS EQUIPPED PILE GRADING AND FACE CUTTER CONTROL OF THE DESKTOP, HAS A SMOOTH ADJUSTMENTS FEED POSSIBILITY OF WORK CYCLE MANUAL AND AUTOMATIC MAIN ENGINE 5,5 KW MOTOR SAW GRADING 2.2 KW FACE AND FEED ENGINE 1.2 KW CLAMPS ON THE TABLE AUTOMATICALLY TIGHTEN DETAIL PNEUMATICALLY. FIXING DETAIL AND THE MACHINE AUTOMATICALLY RELEASING A VERY GOOD STEM DIAMETER 35 MM HEIGHT 180 MM DEPTH MILLING CUTTING MATERIAL SAW SAW CUTTING 140 MM.POSSIBILITY MILLING THE TABLE ANGLE
Vendedor: PPHU Lignum Przemysław Kretowicz
Año de construcción: usado
Ubicación: Land-miller tp74-2c
unimatic c3

size 52×74
year 1990
alcotron
machine n°g-21813
werk-nummer 6366 0327
about 78 millions impressions MILLER TP74-2C UNIMATIC C3 SIZE 52&TIMES;74 YEAR 1990 ALCOTRON MACHINE N&DEG;G-21813 WERK-NUMMER 6366 0327 ABOUT 78 MILLIONS IMPRESSIONS
Vendedor: Elektrospeed
Año de construcción: usado
Precio: 1.200 €
Ubicación: Land-spindle moulder from a carpenter's shop
-miller collet 30 mm
-the machine is already very old, runs but very quiet and powerful.

the holzher four roller feed is to operate only with 2 wheels.

we can deliver nationwide! incl. unloading the driver! let.
for price enquiries, specify always postcode.

contact mr. müller
	
(errors and omissions in the technical data, information
and prices and subject to prior sale!)  SPINDLE MOULDER FROM A CARPENTER'S SHOP -MILLER COLLET 30 MM -THE MACHINE IS ALREADY VERY OLD, RUNS BUT VERY QUIET AND POWERFUL. THE HOLZHER FOUR ROLLER FEED IS TO OPERATE ONLY WITH 2 WHEELS. WE CAN DELIVER NATIONWIDE! INCL. UNLOADING THE DRIVER! LET. FOR PRICE ENQUIRIES, SPECIFY ALWAYS POSTCODE. CONTACT MR. M&UUML;LLER (ERRORS AND OMISSIONS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-multi-purpose lathe wahli multi 78 
wahli freres s.a. in bevilard, switzerland
multi-function machine with an elevating headstock.
it could double as a screw cutting lathe or as a simple horizontal stub miller and borer.
for turning and milling. 
spindle head vertical adjustment. 
center height 125 mm ( 70-230 mm ) 
distance between centers 550 mm 
spindle speeds 50-3000 rpm. 
travels z/x - 350/100 mm
spindle diameter 16 mm
max. working diameter 100 mm
power: 2-speed 0.5/0.9 kw motor
lots of accessories. MULTI-PURPOSE LATHE WAHLI MULTI 78 WAHLI FRERES S.A. IN BEVILARD, SWITZERLAND MULTI-FUNCTION MACHINE WITH AN ELEVATING HEADSTOCK. IT COULD DOUBLE AS A SCREW CUTTING LATHE OR AS A SIMPLE HORIZONTAL STUB MILLER AND BORER. FOR TURNING AND MILLING. SPINDLE HEAD VERTICAL ADJUSTMENT. CENTER HEIGHT 125 MM ( 70-230 MM ) DISTANCE BETWEEN CENTERS 550 MM SPINDLE SPEEDS 50-3000 RPM. TRAVELS Z/X - 350/100 MM SPINDLE DIAMETER 16 MM MAX. WORKING DIAMETER 100 MM POWER: 2-SPEED 0.5/0.9 KW MOTOR LOTS OF ACCESSORIES.
Vendedor: MachTechnica Ltd.
Año de construcción: usado
Ubicación: Land-size 570 x 820 mm<br>2 feeding tables;cylinder jacket;2 chases;2 delivery trolleys<br><br>still in operation: no<br>available: sofort SIZE 570 X 820 MM
2 FEEDING TABLES;CYLINDER JACKET;2 CHASES;2 DELIVERY TROLLEYS

STILL IN OPERATION: NO
AVAILABLE: SOFORT
Vendedor: gg german graphics Graphische Maschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MILLER types: