287 ofertas

Año de construcción: usado
Ubicación: Land-well-functioning used mitsubishi s4s type motor (diesel)

we have a large selection of new and used engines. 
please contact us regarding pricing and availability.
 WELL-FUNCTIONING USED MITSUBISHI S4S TYPE MOTOR (DIESEL) WE HAVE A LARGE SELECTION OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Precio: used machinery auction RESALE 950 €
Ubicación: Land-weight approx.: 440 kg<br/>dimensions (l x w x h) approx.: 1600 x 690 x 1400 mm<br/>description: - including batteries: 24 v<br> - with chargers<br> WEIGHT APPROX.: 440 KG
DIMENSIONS (L X W X H) APPROX.: 1600 X 690 X 1400 MM
DESCRIPTION: - INCLUDING BATTERIES: 24 V
- WITH CHARGERS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-mitsubishi d3000 ls 4 + coater
year: 2002
impression: 235 million
mitsubishi console
semi auto plate change
automatic washers
technotrans beta c cooling – recirculation
baldwin ir dryer
preset 
grafix powder
chrome cylinders
ink temperature control
still in production
available immediately MITSUBISHI D3000 LS 4 + COATER YEAR: 2002 IMPRESSION: 235 MILLION MITSUBISHI CONSOLE SEMI AUTO PLATE CHANGE AUTOMATIC WASHERS TECHNOTRANS BETA C COOLING – RECIRCULATION BALDWIN IR DRYER PRESET GRAFIX POWDER CHROME CYLINDERS INK TEMPERATURE CONTROL STILL IN PRODUCTION AVAILABLE IMMEDIATELY
Vendedor: Patrol Makina
Año de construcción: usado
Precio: 195 €
Ubicación: Land-- -
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-manufacturer: traub
model: tna 600
year of construction: 2004
control: mitsubishi tx-8 h
turning length: [mm] 1,000
spindle transmission rate [mm]: 100 main spindle:
technology: belt spindle with gear
speed: 2,800 rpm
power: 37 kw
torque: 2,020 nm
c-axis: 0.001 °
clamping device: 3 - jaw chuck, smw car block ø400 mm

tool carrier (x/z):
technology: revolver with 12 stations
tool holder: vdi50
driven tools: 3,150 rpm, 6.6 kw, 76 nm
x/z axis travel: 320/1.070 mm
rapid traverse in x/z axis: 15/20 m / min

tailstock:
quill diameter: 100 mm
taper: mk6
loading force (55 bar): 13,100 n

equipment / accessories:
chip disposal: chip conveyor
coolant supply: kss system with paper band filter
tool measurement: preparation, measuring arm
driven tool holder: 3 x thrust, 1 x radial
rigid tool holders: approx. 50 pieces
precast drainage: part collecting tray with conveyor belt
oil mist extraction: prepared
other facilities: automatic bela de door  MANUFACTURER: TRAUB MODEL: TNA 600 YEAR OF CONSTRUCTION: 2004 CONTROL: MITSUBISHI TX-8 H TURNING LENGTH: [MM] 1,000 SPINDLE TRANSMISSION RATE [MM]: 100 MAIN SPINDLE: TECHNOLOGY: BELT SPINDLE WITH GEAR SPEED: 2,800 RPM POWER: 37 KW TORQUE: 2,020 NM C-AXIS: 0.001 ° CLAMPING DEVICE: 3 - JAW CHUCK, SMW CAR BLOCK ø400 MM TOOL CARRIER (X/Z): TECHNOLOGY: REVOLVER WITH 12 STATIONS TOOL HOLDER: VDI50 DRIVEN TOOLS: 3,150 RPM, 6.6 KW, 76 NM X/Z AXIS TRAVEL: 320/1.070 MM RAPID TRAVERSE IN X/Z AXIS: 15/20 M / MIN TAILSTOCK: QUILL DIAMETER: 100 MM TAPER: MK6 LOADING FORCE (55 BAR): 13,100 N EQUIPMENT / ACCESSORIES: CHIP DISPOSAL: CHIP CONVEYOR COOLANT SUPPLY: KSS SYSTEM WITH PAPER BAND FILTER TOOL MEASUREMENT: PREPARATION, MEASURING ARM DRIVEN TOOL HOLDER: 3 X THRUST, 1 X RADIAL RIGID TOOL HOLDERS: APPROX. 50 PIECES PRECAST DRAINAGE: PART COLLECTING TRAY WITH CONVEYOR BELT OIL MIST EXTRACTION: PREPARED OTHER FACILITIES: AUTOMATIC BELA DE DOOR
Vendedor: G+S Werkzeugmaschinen
Año de construcción: usado
Precio: 290 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-"generators himoinsa htw 1530 t5, mitsubishi s12r ptaa", 1530kva 400v 50 hz.
 year 2011, like new only 37 h operating hours, with additional electrical circuit breakers, 3000 l day tank, ec. ec.
 super soundproof, car ready for use. "GENERATORS HIMOINSA HTW 1530 T5, MITSUBISHI S12R PTAA", 1530KVA 400V 50 HZ. YEAR 2011, LIKE NEW ONLY 37 H OPERATING HOURS, WITH ADDITIONAL ELECTRICAL CIRCUIT BREAKERS, 3000 L DAY TANK, EC. EC. SUPER SOUNDPROOF, CAR READY FOR USE.
Vendedor: Fa. Peter Held Energycontrol
Año de construcción: usado
Precio: used machinery auction RESALE 1.000 €
Ubicación: Land-weight approx.: 3500 kg<br/>dimensions (l x w x h) approx.: 3000 x 1000 x 2400 mm<br/>description: electric forklift mitsubishi fbs 18 48e<br> lifting capacity 1750k, hydraulic grippers. height lift capacity 3300 mm. the connection cable is cutted. working hours 7878 WEIGHT APPROX.: 3500 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 1000 X 2400 MM
DESCRIPTION: ELECTRIC FORKLIFT MITSUBISHI FBS 18 48E
LIFTING CAPACITY 1750K, HYDRAULIC GRIPPERS. HEIGHT LIFT CAPACITY 3300 MM. THE CONNECTION CABLE IS CUTTED. WORKING HOURS 7878
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-bar capacity 16 mm - 2 x c axis - mitsubishi control - iemca boss 432r/32 barfeed BAR CAPACITY 16 MM - 2 X C AXIS - MITSUBISHI CONTROL - IEMCA BOSS 432R/32 BARFEED Barra de capacidad 16 mm - 2 x C eje - de Control de Mitsubishi - Iemca Boss 432r/32 barfeed
Vendedor: DE-MA CNC Srl

Maquinas de doblaje largo CNC more

Año de construcción: usado
Precio: used machinery auction RESALE 1.000 €
Ubicación: Land-weight approx.: 2800 kg<br/>dimensions (l x w x h) approx.: 3000 x 1000 x 2400 mm<br/>description: electric forklift mitsubishi fbs 18 48e<br> lifting capacity 1750kg, hydraulic grippers. height lift capacity 3300 mm. working hours 7940 WEIGHT APPROX.: 2800 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 1000 X 2400 MM
DESCRIPTION: ELECTRIC FORKLIFT MITSUBISHI FBS 18 48E
LIFTING CAPACITY 1750KG, HYDRAULIC GRIPPERS. HEIGHT LIFT CAPACITY 3300 MM. WORKING HOURS 7940
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-travel axes[ x x y x z ]: 750 x 500 x 350 mm
 
max. workpiece size x: 1300 mm
max. workpiece size y: 1000 mm
max. workpiece size z: 345 mm
max. workpiece weight: 3000 kg
with awf ( automatic wire feeding )
submerged
cooling unit TRAVEL AXES[ X X Y X Z ]: 750 X 500 X 350 MM MAX. WORKPIECE SIZE X: 1300 MM MAX. WORKPIECE SIZE Y: 1000 MM MAX. WORKPIECE SIZE Z: 345 MM MAX. WORKPIECE WEIGHT: 3000 KG WITH AWF ( AUTOMATIC WIRE FEEDING ) SUBMERGED COOLING UNIT
Vendedor: Mac-Tec
Año de construcción: usado
Precio: used machinery auction RESALE 1.500 €
Ubicación: Land-weight approx.: 3400 kg<br/>dimensions (l x w x h) approx.: 3000 x 1000 x 2400 mm<br/>description: electric forklift mitsubishi fbp 25<br> lifting capacity 2500kg, max height lift capacity 5500 mm. hydraulic grippers. tweezers rotary head WEIGHT APPROX.: 3400 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 1000 X 2400 MM
DESCRIPTION: ELECTRIC FORKLIFT MITSUBISHI FBP 25
LIFTING CAPACITY 2500KG, MAX HEIGHT LIFT CAPACITY 5500 MM. HYDRAULIC GRIPPERS. TWEEZERS ROTARY HEAD
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 6.638 €
Ubicación: Land-technical data:

brand: mitsubishi

type: v55fs

year: 1992

15 cores per electrode changer

control: mitsubishi

range of motion:

x-450

y-350

z-350 mm

maximum work piece size:

950 x 600 x 310 mm

maximum workpiece weight:

1000 kg

table size:

800 x 600 mm TECHNICAL DATA: BRAND: MITSUBISHI TYPE: V55FS YEAR: 1992 15 CORES PER ELECTRODE CHANGER CONTROL: MITSUBISHI RANGE OF MOTION: X-450 Y-350 Z-350 MM MAXIMUM WORK PIECE SIZE: 950 X 600 X 310 MM MAXIMUM WORKPIECE WEIGHT: 1000 KG TABLE SIZE: 800 X 600 MM
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 2700 x 900 x 2300 mm<br/>description: electric stacker mitsubishi<br> lifting capacity 250kg. max. height lift capacity 3300 mm. working hours 7085 WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 2700 X 900 X 2300 MM
DESCRIPTION: ELECTRIC STACKER MITSUBISHI
LIFTING CAPACITY 250KG. MAX. HEIGHT LIFT CAPACITY 3300 MM. WORKING HOURS 7085
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 750mm, z-travel: 500mm, length: 3475mm, width: 3138mm, height: 2250mm, operational hours: ca. 70.000h, with unit cooler mitsubishi he-sv50-w43, available after march 2019.  X-TRAVEL: 750MM, Z-TRAVEL: 500MM, LENGTH: 3475MM, WIDTH: 3138MM, HEIGHT: 2250MM, OPERATIONAL HOURS: CA. 70.000H, WITH UNIT COOLER MITSUBISHI HE-SV50-W43, AVAILABLE AFTER MARCH 2019.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 2700 x 900 x 2300 mm<br/>description: electric stacker mitsubishi<br> lifting capacity 250kg. max. height lift 3300 mm. working hours 5647 WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 2700 X 900 X 2300 MM
DESCRIPTION: ELECTRIC STACKER MITSUBISHI
LIFTING CAPACITY 250KG. MAX. HEIGHT LIFT 3300 MM. WORKING HOURS 5647
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-year 2010
mitsubishi cnc
bar passage 60 mm
2 comb towers
powered
counter
spindle speed / counterspindle: 6,000 rpm YEAR 2010 MITSUBISHI CNC BAR PASSAGE 60 MM 2 COMB TOWERS POWERED COUNTER SPINDLE SPEED / COUNTERSPINDLE: 6,000 RPM
Vendedor: Industrialbay
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 2700 x 900 x 2300 mm<br/>description: electric stacker mitsubishi<br> lifting capacity 250kg. max height lift 3300 mm. working hours 67705 WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 2700 X 900 X 2300 MM
DESCRIPTION: ELECTRIC STACKER MITSUBISHI
LIFTING CAPACITY 250KG. MAX HEIGHT LIFT 3300 MM. WORKING HOURS 67705
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 9.000 €
Ubicación: Land-to the sale is a used pump suitable for the mitsubishi engine s12r TO THE SALE IS A USED PUMP SUITABLE FOR THE MITSUBISHI ENGINE S12R
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 42 / 140 mm<br/>turning length: 170 mm<br/>control: mitsubishi meldas <br/>turning speeds: 80-8.000 u/min<br/>c-axis: 0,001° <br/>turret (x-stations): 2x 12 (vdi 20) angetrieben<br/>turning speeds: 45-4.500 u/min<br/>spindle: 1 kw<br/>gripping station: 42 mm<br/>turning speeds: 60-6.000 u/min<br/>c-axis: 0,001° <br/>number of controlled axis: 8 <br/>collet unit: 48 din 6343 .<br/>number of working hours: 10769 h<br/>total power requirement: 7,5 / 11 kw<br/>weight of the machine ca.: 3,3 t<br/>dimensions of the machine ca.: 2,4 x 1,6 x 2,2 m<br/>cnc-turning & milling machine citizen boley be 42, built 2008<br/>simultaneous working with 7 axes on both sides <br/>conditions very well, only 10.769h (august 2018)<br/>available in october 2018<br/><br/>attachment:<br/>some tool holder<br/>additional coolant cooler<br/>boley is at the moment fitted with automatic loading system. owner keeps it.<br/>boley be 42 can be delivered as single machine or with loader (option)<br/><br/><br/><br/><br/> TURNING DIAMETER: 42 / 140 MM
TURNING LENGTH: 170 MM
CONTROL: MITSUBISHI MELDAS
TURNING SPEEDS: 80-8.000 U/MIN
C-AXIS: 0,001°
TURRET (X-STATIONS): 2X 12 (VDI 20) ANGETRIEBEN
TURNING SPEEDS: 45-4.500 U/MIN
SPINDLE: 1 KW
GRIPPING STATION: 42 MM
TURNING SPEEDS: 60-6.000 U/MIN
C-AXIS: 0,001°
NUMBER OF CONTROLLED AXIS: 8
COLLET UNIT: 48 DIN 6343 .
NUMBER OF WORKING HOURS: 10769 H
TOTAL POWER REQUIREMENT: 7,5 / 11 KW
WEIGHT OF THE MACHINE CA.: 3,3 T
DIMENSIONS OF THE MACHINE CA.: 2,4 X 1,6 X 2,2 M
CNC-TURNING & MILLING MACHINE CITIZEN BOLEY BE 42, BUILT 2008
SIMULTANEOUS WORKING WITH 7 AXES ON BOTH SIDES
CONDITIONS VERY WELL, ONLY 10.769H (AUGUST 2018)
AVAILABLE IN OCTOBER 2018

ATTACHMENT:
SOME TOOL HOLDER
ADDITIONAL COOLANT COOLER
BOLEY IS AT THE MOMENT FITTED WITH AUTOMATIC LOADING SYSTEM. OWNER KEEPS IT.
BOLEY BE 42 CAN BE DELIVERED AS SINGLE MACHINE OR WITH LOADER (OPTION)




Vendedor: Detlef Jahn e. K.
Año de construcción: usado
Ubicación: Land-overview
brand: twinhorn
model: vq-1500
application type: milling
machine type: machining centers (vertical) 
availability: immediately
production year: 2004 
location: india
origin country: taiwan 
production hours: 32500

general data
measurements width: 2700 mm 
measurements depth: 3300 mm 
measurements height: 2700 mm 
machine weight: 11000 kg

control unit
brand: mitsubishi
model: e18e010e0
cnc main language: english 
cnc language customizable: yes

main drive
number of spindles: 1
spindle speed range: 4800 rpm

movement
x-axis movement: 1530 mm 
y-axis movement: 760 mm 
z-axis movement: 650 mm

media
main electronic connection: 400 v 
power consumption: 25 kva

see full technical specifications of this machine at: abc://bit.ly/2q4pjoz  OVERVIEW BRAND: TWINHORN MODEL: VQ-1500 APPLICATION TYPE: MILLING MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2004 LOCATION: INDIA ORIGIN COUNTRY: TAIWAN PRODUCTION HOURS: 32500 GENERAL DATA MEASUREMENTS WIDTH: 2700 MM MEASUREMENTS DEPTH: 3300 MM MEASUREMENTS HEIGHT: 2700 MM MACHINE WEIGHT: 11000 KG CONTROL UNIT BRAND: MITSUBISHI MODEL: E18E010E0 CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 4800 RPM MOVEMENT X-AXIS MOVEMENT: 1530 MM Y-AXIS MOVEMENT: 760 MM Z-AXIS MOVEMENT: 650 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 25 KVA SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2Q4PJOZ
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 2600 kg<br/>x-travel: 500 mm<br/>y-travel: 350 mm<br/>z-travel: 300 mm<br/>control: mitsubishi cnc <br/>dimensions (l x w x h) approx.: 1 x 1 x 1 mm<br/>table dimensions l x w: 780 x 630 mm<br/>description: <h3><u>mitsubishi fx 20 wire edm machine</u></h3> <br> <br> machine number 57 e 20552. <br> no accessories and no documentation available. <br> <h3>verfahrwege und achsen</h3> <br> - x ? axis: 500 mm<br> - y - axis: 350 mm<br> - z - axis: 300 mm<br> <br> <h3>table dimensions</h3> - 780 x 630 mm (l x b)<br> <br> <h3>general data</h3> - year of manufacture: 1997 - mitsubishi cnc WEIGHT APPROX.: 2600 KG
X-TRAVEL: 500 MM
Y-TRAVEL: 350 MM
Z-TRAVEL: 300 MM
CONTROL: MITSUBISHI CNC
DIMENSIONS (L X W X H) APPROX.: 1 X 1 X 1 MM
TABLE DIMENSIONS L X W: 780 X 630 MM
DESCRIPTION:

MITSUBISHI FX 20 WIRE EDM MACHINE



MACHINE NUMBER 57 E 20552.
NO ACCESSORIES AND NO DOCUMENTATION AVAILABLE.

VERFAHRWEGE UND ACHSEN


- X ? AXIS: 500 MM
- Y - AXIS: 350 MM
- Z - AXIS: 300 MM

TABLE DIMENSIONS

- 780 X 630 MM (L X B)

GENERAL DATA

- YEAR OF MANUFACTURE: 1997 - MITSUBISHI CNC
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-make: citizen
model: e32 cnc sliding head lathe
year: 1990
condition: used
machine type: lathe 
location of machine: belgium

machine details
year of manufacture: 1990,
control:mitsubishi,
bar capacity: 32 mm,
main spindle speed: 130-6000 rpm,
with sub spindle,
maximum machining length: 320 mm,
main spindle motor drive: 7.5 hp,
twin c-axis and live tooling,
iemca magazine barloader. MAKE: CITIZEN MODEL: E32 CNC SLIDING HEAD LATHE YEAR: 1990 CONDITION: USED MACHINE TYPE: LATHE LOCATION OF MACHINE: BELGIUM MACHINE DETAILS YEAR OF MANUFACTURE: 1990, CONTROL:MITSUBISHI, BAR CAPACITY: 32 MM, MAIN SPINDLE SPEED: 130-6000 RPM, WITH SUB SPINDLE, MAXIMUM MACHINING LENGTH: 320 MM, MAIN SPINDLE MOTOR DRIVE: 7.5 HP, TWIN C-AXIS AND LIVE TOOLING, IEMCA MAGAZINE BARLOADER.
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land-weight approx.: 3500 kg<br/>dimensions (l x w x h) approx.: 0 x 0 x 0 mm<br/>description: 92 kw, diesel, loading area 4000 x 2020 mm, double tyre, payload 1200 kg, mot 07/2018<br> <br> WEIGHT APPROX.: 3500 KG
DIMENSIONS (L X W X H) APPROX.: 0 X 0 X 0 MM
DESCRIPTION: 92 KW, DIESEL, LOADING AREA 4000 X 2020 MM, DOUBLE TYRE, PAYLOAD 1200 KG, MOT 07/2018

Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand paper mill – already dismantled!
mfc.:	ihi, johnson foils, mitsubishi-beloit, honeywell, metso		built:	1980
revision:	2006. 5. 2	revision of hood ventilation specification						
                2015. 6. 29	revision of rebuild item
		2015. 7. 1	revision of description, deletion of part drawing
		2016. 3. 23	addition of poly disc filter specification
		2016. 4. 19	revision of operating data	
paper width:	5300 mm	reel web width:  4,800 mm		grammage:	45 – 120 gsm	
operation speed:	1100 m/min.		max. production: 	600 ton/day (on reel)
head box	hydraulic type (converflo)	slice width: 5,150mm
wire 		(pf gap): twin wire type	rebuild of forming zone by johnson foils in 2004
press		tri-nip		replaced of center roll (ceramic cover) by metso in 2005
replaced of steam box by honeywell in 2003
dryer		4 group (42 cylinder)		1-2 single / 3-4 double
installation of web stabilizer by ev group in 2007 stationary syphon
rebuild by deublin in 2006
calender	snc - 1 stack / 1 nip		rebuild by metso in 2003
reel		pope
winder	type:	two-drum	speed: 2,300 m/min	rebuild by mhi in 2003
replaced of slitting station by ape in 2006
drive		sectional, dc motor (toshiba:japan)	speed-up in 2005, 2007
vacuum	water ring
control system	qcs:	davinci
changed of scanner by honeywell in 2003 basis weight, moisture, caliper, 
hole detector: 	new installation by isravision in 2006
dimension product of paper: width - 1,576 mm    diameter - max. 1,200 mm after winder
paper grade: 	printing & writing paper/liner /kraft/newsprint
 QTY. 1 SECOND-HAND PAPER MILL – ALREADY DISMANTLED! MFC.: IHI, JOHNSON FOILS, MITSUBISHI-BELOIT, HONEYWELL, METSO BUILT: 1980 REVISION: 2006. 5. 2 REVISION OF HOOD VENTILATION SPECIFICATION 2015. 6. 29 REVISION OF REBUILD ITEM 2015. 7. 1 REVISION OF DESCRIPTION, DELETION OF PART DRAWING 2016. 3. 23 ADDITION OF POLY DISC FILTER SPECIFICATION 2016. 4. 19 REVISION OF OPERATING DATA PAPER WIDTH: 5300 MM REEL WEB WIDTH: 4,800 MM GRAMMAGE: 45 – 120 GSM OPERATION SPEED: 1100 M/MIN. MAX. PRODUCTION: 600 TON/DAY (ON REEL) HEAD BOX HYDRAULIC TYPE (CONVERFLO) SLICE WIDTH: 5,150MM WIRE (PF GAP): TWIN WIRE TYPE REBUILD OF FORMING ZONE BY JOHNSON FOILS IN 2004 PRESS TRI-NIP REPLACED OF CENTER ROLL (CERAMIC COVER) BY METSO IN 2005 REPLACED OF STEAM BOX BY HONEYWELL IN 2003 DRYER 4 GROUP (42 CYLINDER) 1-2 SINGLE / 3-4 DOUBLE INSTALLATION OF WEB STABILIZER BY EV GROUP IN 2007 STATIONARY SYPHON REBUILD BY DEUBLIN IN 2006 CALENDER SNC - 1 STACK / 1 NIP REBUILD BY METSO IN 2003 REEL POPE WINDER TYPE: TWO-DRUM SPEED: 2,300 M/MIN REBUILD BY MHI IN 2003 REPLACED OF SLITTING STATION BY APE IN 2006 DRIVE SECTIONAL, DC MOTOR (TOSHIBA:JAPAN) SPEED-UP IN 2005, 2007 VACUUM WATER RING CONTROL SYSTEM QCS: DAVINCI CHANGED OF SCANNER BY HONEYWELL IN 2003 BASIS WEIGHT, MOISTURE, CALIPER, HOLE DETECTOR: NEW INSTALLATION BY ISRAVISION IN 2006 DIMENSION PRODUCT OF PAPER: WIDTH - 1,576 MM DIAMETER - MAX. 1,200 MM AFTER WINDER PAPER GRADE: PRINTING & WRITING PAPER/LINER /KRAFT/NEWSPRINT
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-x-travel: 1020 mm<br/>y-travel: 610 mm<br/>z-travel: 610 mm<br/>table surface area: 1200 x 600 mm<br/>workpiece weight: 900 kg<br/>tool taper: bt 40 / big plus <br/>turning speed range: 12.000 u/min<br/>power capacity: 15 kw<br/>feed range: 1  -  20.000 mm/min<br/>rapid traverse: 36 m/min<br/>tool length - max.: 300 mm<br/>tool diameter: 90 / 180 mm<br/>control: mitsubishi m 80 a <br/>distance spindle nose and table: 100 - 710 mm<br/>tool change unit: 24-fold <br/>total power requirement: - kva<br/>weight of the machine ca.: 7,5 t<br/>dimensions of the machine ca.: 2,6 x 2,7 x 2,85 m<br/>equipped with:<br/>- cnc control mitsubishi m 80a<br/>- atc 24-fold (bt40/bigplus)<br/>- chip conveyor<br/>- ce sign<br/>- c2-class ball screws in all axis<br/><br/>2 year control unit and 1 year machine warranty included <br/><br/><br/><br/><br/> X-TRAVEL: 1020 MM
Y-TRAVEL: 610 MM
Z-TRAVEL: 610 MM
TABLE SURFACE AREA: 1200 X 600 MM
WORKPIECE WEIGHT: 900 KG
TOOL TAPER: BT 40 / BIG PLUS
TURNING SPEED RANGE: 12.000 U/MIN
POWER CAPACITY: 15 KW
FEED RANGE: 1 - 20.000 MM/MIN
RAPID TRAVERSE: 36 M/MIN
TOOL LENGTH - MAX.: 300 MM
TOOL DIAMETER: 90 / 180 MM
CONTROL: MITSUBISHI M 80 A
DISTANCE SPINDLE NOSE AND TABLE: 100 - 710 MM
TOOL CHANGE UNIT: 24-FOLD
TOTAL POWER REQUIREMENT: - KVA
WEIGHT OF THE MACHINE CA.: 7,5 T
DIMENSIONS OF THE MACHINE CA.: 2,6 X 2,7 X 2,85 M
EQUIPPED WITH:
- CNC CONTROL MITSUBISHI M 80A
- ATC 24-FOLD (BT40/BIGPLUS)
- CHIP CONVEYOR
- CE SIGN
- C2-CLASS BALL SCREWS IN ALL AXIS

2 YEAR CONTROL UNIT AND 1 YEAR MACHINE WARRANTY INCLUDED




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-wegen lagerauflösung verkaufen wir hochwertige leasingrückläufer und insolvenzwaren aus dem officebereich.

zahlreiche digitale schwarzweiß- und farbkopiersysteme, drucker, server, computer, monitore, telefonanlagen, netzwerkzubehör, büromöbel, hotel- und gastrokaffeeautomat carimali uvm.

digitalkopier- und drucksysteme (teilweise mit umfangreichen zubehör):

konica minolta:
bizhub 190f, 5x bizhub 40p, 2x pagepro 4650, 
5x mc 1650en, preise auf anfrage
konica minolta bizhub c224e a3 farblaserkopierer, preis: eur 890,-

olivetti:
olivetti dcopia 5500mf
preis: eur 250,-

canon:
4x canon advance irc 5030 a3 farblaserkopierer
stückpreis: eur 190,-

2x plotter ipf 710, 1x plotter ipf 510
preis: vhs

sharp:
mx-381n a4 farblaserkopierer: eur 200,-
, mx-2614n a3 farblaserkopierer: eur 380,-, 
mx-2610n a3 farblaserkopierer: eur 590,-


kyocera:
4x fs-c5150dn a4 farblaserdrucker, preis pro gerät: eur 40,-
2x c2126mfp+, preis pro gerät: eur 60,-
1x taskalfa c2550 a3-farblaserkopierer, preis: eur 250,-

utax:
5x lp 3335, preis pro gerät: eur 15,-

brother:
mfc 9120cn, 2x hl-5350dn, preis pro gerät: eur 30,-
5x lt-5300

hp:
1x p4515x, preis: 130,-

samsung:
3x ml-4550, preis pro gerät: eur 45,-
2x ml-3470, preis pro gerät: eur 40,-
6x ml-s4550ar

oki:
2x es 3640a3, preis: ab eur 250,-
1x c9800mfp, preis: eur 500,-
2x es4191mfp, preis pro gerät eur 85,-
6x es4131, preis pro drucker: eur 50,-


fujitsu computer:
7x fujitsu esprimo p420 ci3-4150,
tower gehäuse, intel core i3-4150 (3,5ghz, 2c/4t, 3mb),
intel hd graphics 4400, 4gb ram, ddr3-1600, 128gb ssd/s-sata iii, dvd-rw, usb 3.0 uvm. preis pro pc: eur 150,-

fujitsu server:
2x fujitsu primergy tx200 s6, ps160-d2799, 2x intel xeon e5620, 2,4ghz, lsi mega raid, dvd-rw, 8gb ram, ohne festplatten, 
festplattenrahmen vorhanden. preis pro gerät: eur 150,-

1x fujitsu primergy tx150 s7, ps160-d2759, 1x intel xeon 3430 2,4ghz, lsi mega raid, 4gb ram, dvd-rw, ohne festplatten.
1x fujitsu primergy tx200s5, s26361-d2709, 2x intel xeon, 2,26ghz, lsi mega raid, dvd, 8gb ram, ultrium 3lto, ohne festplatten.
preis pro gerät: eur 150,-


exone server:
1x tower gehäuse, exone super micro x8dtl-if, raid sas743tq, 1x intel xeon e5620 2,4ghz, 2x 8gb ram, ohne festplatten, dvd-rw uvm. preis: eur 250,-
2x exone server, tower gehäuse, exone super micro,  x9scl+-f, raid sas733tq, 1x intel xeon e3-130v2   3,3ghz, 2x 4gb ram, ohne festplatten (sata festplatten auf anfrage), dvd-rw uvm. preis pro server: eur 250,-

dell server:
1x dell poweredge t110ii, 1x intel xeon sp e3-1270 3,1 ghz, 2x 4gb ram, 2x 500gb wd 3,5“ sata, dvd-rw. preis: eur 170,-

6x iiyama prolite profi-monitore x2783hsu-b1, amva+led-monitor full-hd 1080p, matte oberfläche, 16:9, 
auflösung: 1920x 1080, 27“-display 68,6cm, 4ms,
hdmi, dvi-d, vga, 2x1watt lautsprecher.
preis pro monitor: eur 90,-


telefonanlagen:

1x octopus open 730, 1x t-comfort 730 mit telefon, 1x t-comfort dect-basis, 5x t-comfort 730 systemtelefon weiß.

1x t-octopus f-(astec aa23560, 3x siemens openstage 60t, 6x siemens openstage 40t.

1x siemens hipath 3300, 6x t-octophon open 141 urban grey, 3x gn netcom gn9359 und 7x t-com sinus 702k inkl. ladest.

1x octopus 830 business.

1x aastra 470 pbx 958. exp. a470-1b,
43 aastra 5370ip, 5x alcatel 4035 phone graphite.

die telefonanlagen werden vorzugsweise im paket an händler verkauft. preis: vhs

fotodrucker:
1x kodak kiosk mit fotodrucker und fotopapier, 1x mitsubishi easyphoto mit drucker und fotopapier.


gern können sie sich vor ort von der qualität und funktion unserer angebote überzeugen.
jedem drucker und kopiergerät liegt ein testausdruck bei.
der verkauf erfolgt unter ausschluss der gewährleistung und nur auf unserem speditionslager nach telefonischer vereinbarung.

rechnung mit mwst.-ausweis WEGEN LAGERAUFLöSUNG VERKAUFEN WIR HOCHWERTIGE LEASINGRüCKLäUFER UND INSOLVENZWAREN AUS DEM OFFICEBEREICH. ZAHLREICHE DIGITALE SCHWARZWEIß- UND FARBKOPIERSYSTEME, DRUCKER, SERVER, COMPUTER, MONITORE, TELEFONANLAGEN, NETZWERKZUBEHöR, BüROMöBEL, HOTEL- UND GASTROKAFFEEAUTOMAT CARIMALI UVM. DIGITALKOPIER- UND DRUCKSYSTEME (TEILWEISE MIT UMFANGREICHEN ZUBEHöR): KONICA MINOLTA: BIZHUB 190F, 5X BIZHUB 40P, 2X PAGEPRO 4650, 5X MC 1650EN, PREISE AUF ANFRAGE KONICA MINOLTA BIZHUB C224E A3 FARBLASERKOPIERER, PREIS: EUR 890,- OLIVETTI: OLIVETTI DCOPIA 5500MF PREIS: EUR 250,- CANON: 4X CANON ADVANCE IRC 5030 A3 FARBLASERKOPIERER STüCKPREIS: EUR 190,- 2X PLOTTER IPF 710, 1X PLOTTER IPF 510 PREIS: VHS SHARP: MX-381N A4 FARBLASERKOPIERER: EUR 200,- , MX-2614N A3 FARBLASERKOPIERER: EUR 380,-, MX-2610N A3 FARBLASERKOPIERER: EUR 590,- KYOCERA: 4X FS-C5150DN A4 FARBLASERDRUCKER, PREIS PRO GERäT: EUR 40,- 2X C2126MFP+, PREIS PRO GERäT: EUR 60,- 1X TASKALFA C2550 A3-FARBLASERKOPIERER, PREIS: EUR 250,- UTAX: 5X LP 3335, PREIS PRO GERäT: EUR 15,- BROTHER: MFC 9120CN, 2X HL-5350DN, PREIS PRO GERäT: EUR 30,- 5X LT-5300 HP: 1X P4515X, PREIS: 130,- SAMSUNG: 3X ML-4550, PREIS PRO GERäT: EUR 45,- 2X ML-3470, PREIS PRO GERäT: EUR 40,- 6X ML-S4550AR OKI: 2X ES 3640A3, PREIS: AB EUR 250,- 1X C9800MFP, PREIS: EUR 500,- 2X ES4191MFP, PREIS PRO GERäT EUR 85,- 6X ES4131, PREIS PRO DRUCKER: EUR 50,- FUJITSU COMPUTER: 7X FUJITSU ESPRIMO P420 CI3-4150, TOWER GEHäUSE, INTEL CORE I3-4150 (3,5GHZ, 2C/4T, 3MB), INTEL HD GRAPHICS 4400, 4GB RAM, DDR3-1600, 128GB SSD/S-SATA III, DVD-RW, USB 3.0 UVM. PREIS PRO PC: EUR 150,- FUJITSU SERVER: 2X FUJITSU PRIMERGY TX200 S6, PS160-D2799, 2X INTEL XEON E5620, 2,4GHZ, LSI MEGA RAID, DVD-RW, 8GB RAM, OHNE FESTPLATTEN, FESTPLATTENRAHMEN VORHANDEN. PREIS PRO GERäT: EUR 150,- 1X FUJITSU PRIMERGY TX150 S7, PS160-D2759, 1X INTEL XEON 3430 2,4GHZ, LSI MEGA RAID, 4GB RAM, DVD-RW, OHNE FESTPLATTEN. 1X FUJITSU PRIMERGY TX200S5, S26361-D2709, 2X INTEL XEON, 2,26GHZ, LSI MEGA RAID, DVD, 8GB RAM, ULTRIUM 3LTO, OHNE FESTPLATTEN. PREIS PRO GERäT: EUR 150,- EXONE SERVER: 1X TOWER GEHäUSE, EXONE SUPER MICRO X8DTL-IF, RAID SAS743TQ, 1X INTEL XEON E5620 2,4GHZ, 2X 8GB RAM, OHNE FESTPLATTEN, DVD-RW UVM. PREIS: EUR 250,- 2X EXONE SERVER, TOWER GEHäUSE, EXONE SUPER MICRO, X9SCL+-F, RAID SAS733TQ, 1X INTEL XEON E3-130V2 3,3GHZ, 2X 4GB RAM, OHNE FESTPLATTEN (SATA FESTPLATTEN AUF ANFRAGE), DVD-RW UVM. PREIS PRO SERVER: EUR 250,- DELL SERVER: 1X DELL POWEREDGE T110II, 1X INTEL XEON SP E3-1270 3,1 GHZ, 2X 4GB RAM, 2X 500GB WD 3,5“ SATA, DVD-RW. PREIS: EUR 170,- 6X IIYAMA PROLITE PROFI-MONITORE X2783HSU-B1, AMVA+LED-MONITOR FULL-HD 1080P, MATTE OBERFLäCHE, 16:9, AUFLöSUNG: 1920X 1080, 27“-DISPLAY 68,6CM, 4MS, HDMI, DVI-D, VGA, 2X1WATT LAUTSPRECHER. PREIS PRO MONITOR: EUR 90,- TELEFONANLAGEN: 1X OCTOPUS OPEN 730, 1X T-COMFORT 730 MIT TELEFON, 1X T-COMFORT DECT-BASIS, 5X T-COMFORT 730 SYSTEMTELEFON WEIß. 1X T-OCTOPUS F-(ASTEC AA23560, 3X SIEMENS OPENSTAGE 60T, 6X SIEMENS OPENSTAGE 40T. 1X SIEMENS HIPATH 3300, 6X T-OCTOPHON OPEN 141 URBAN GREY, 3X GN NETCOM GN9359 UND 7X T-COM SINUS 702K INKL. LADEST. 1X OCTOPUS 830 BUSINESS. 1X AASTRA 470 PBX 958. EXP. A470-1B, 43 AASTRA 5370IP, 5X ALCATEL 4035 PHONE GRAPHITE. DIE TELEFONANLAGEN WERDEN VORZUGSWEISE IM PAKET AN HäNDLER VERKAUFT. PREIS: VHS FOTODRUCKER: 1X KODAK KIOSK MIT FOTODRUCKER UND FOTOPAPIER, 1X MITSUBISHI EASYPHOTO MIT DRUCKER UND FOTOPAPIER. GERN KöNNEN SIE SICH VOR ORT VON DER QUALITäT UND FUNKTION UNSERER ANGEBOTE üBERZEUGEN. JEDEM DRUCKER UND KOPIERGERäT LIEGT EIN TESTAUSDRUCK BEI. DER VERKAUF ERFOLGT UNTER AUSSCHLUSS DER GEWäHRLEISTUNG UND NUR AUF UNSEREM SPEDITIONSLAGER NACH TELEFONISCHER VEREINBARUNG. RECHNUNG MIT MWST.-AUSWEIS
Vendedor: Günther EDV & Kopiersysteme
Año de construcción: usado
Ubicación: Land-x-travel: 1020 mm<br/>y-travel: 610 mm<br/>z-travel: 610 mm<br/>table surface area: 1200 x 600 mm<br/>workpiece weight: 900 kg<br/>tool taper: bt 40 / big plus <br/>turning speed range: 15000 u/min<br/>power capacity: 18,5 kw<br/>feed range: 1  -  20.000 mm/min<br/>rapid traverse: 36 m/min<br/>tool length - max.: 300 mm<br/>tool diameter: 90 / 180 mm<br/>control: mitsubishi m 80 a <br/>distance spindle nose and table: 100 - 710 mm<br/>tool change unit: 24-fold <br/>total power requirement: - kva<br/>weight of the machine ca.: 7,5 t<br/>dimensions of the machine ca.: 2,6 x 2,7 x 2,85 m<br/>equipped with:<br/>- cnc control mitsubishi m 80a<br/>- atc 24-fold (bt40/bigplus)<br/>- chip conveyor<br/>- ce sign<br/>- c2-class ball screws in all axis<br/><br/>2 year control unit and 1 year machine warranty included <br/><br/><br/><br/><br/> X-TRAVEL: 1020 MM
Y-TRAVEL: 610 MM
Z-TRAVEL: 610 MM
TABLE SURFACE AREA: 1200 X 600 MM
WORKPIECE WEIGHT: 900 KG
TOOL TAPER: BT 40 / BIG PLUS
TURNING SPEED RANGE: 15000 U/MIN
POWER CAPACITY: 18,5 KW
FEED RANGE: 1 - 20.000 MM/MIN
RAPID TRAVERSE: 36 M/MIN
TOOL LENGTH - MAX.: 300 MM
TOOL DIAMETER: 90 / 180 MM
CONTROL: MITSUBISHI M 80 A
DISTANCE SPINDLE NOSE AND TABLE: 100 - 710 MM
TOOL CHANGE UNIT: 24-FOLD
TOTAL POWER REQUIREMENT: - KVA
WEIGHT OF THE MACHINE CA.: 7,5 T
DIMENSIONS OF THE MACHINE CA.: 2,6 X 2,7 X 2,85 M
EQUIPPED WITH:
- CNC CONTROL MITSUBISHI M 80A
- ATC 24-FOLD (BT40/BIGPLUS)
- CHIP CONVEYOR
- CE SIGN
- C2-CLASS BALL SCREWS IN ALL AXIS

2 YEAR CONTROL UNIT AND 1 YEAR MACHINE WARRANTY INCLUDED




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-ctp-imagesetter for polyesterplates
manufacturer: mitsubishi
model: sdp-eco 1630 ii
year: unknown
with rip and monitor
location: germany
price: on request CTP-IMAGESETTER FOR POLYESTERPLATES MANUFACTURER: MITSUBISHI MODEL: SDP-ECO 1630 II YEAR: UNKNOWN WITH RIP AND MONITOR LOCATION: GERMANY PRICE: ON REQUEST
Vendedor: USED Machines
Año de construcción: usado
Ubicación: Land-weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 3800 x 1400 x 2200 mm<br/>description: lifting capacity 2500 kg, lifting height 4330 mm, lateral stroke function (incorrect), approx. 2626 operating hours, fork length 1100 mm WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 3800 X 1400 X 2200 MM
DESCRIPTION: LIFTING CAPACITY 2500 KG, LIFTING HEIGHT 4330 MM, LATERAL STROKE FUNCTION (INCORRECT), APPROX. 2626 OPERATING HOURS, FORK LENGTH 1100 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 170.508 €
Ubicación: Land-1030 kva generator (hood unit) performance: 1030 kva / 824 kw prp
operating mode: 1500 r.p.m
voltage: 400 v / 230 v
available voltages: 230 230 / 132 v
power factor: cos phi 0.8

engine:
engine manufacturer: mitsubishi
engine model: s12h pta
engine type: four-stroke diesel
type of injection: direct
kind of aspiration: turbocharger and subsequent cooling
cylinder, number and layout: 12 v
total capacity: 37,11 l
cooling system: water
specifications engine oil: api cd or cf sae 30 or sae 40

fuel consumption 100% prp: 216,75 l / h
fuel consumption 75% prp: 166,78 l / h
fuel consumption 50% prp: 117,52 l / h

oil consumption under full load: 0.8 g / kwh
controls: electronic
inner diameter output exhaust pipe: 212 mm

alternator:
builder: manufacturer: stamford
poles: 4
connection type (default): star - series
clutch type: s-0 18 "
insulation protection class: class h
mechanical protection type (acc. to iec-34-5): ip 23
control system: selbsterregt, without brushes
voltage regulator: a.v.r. (electronic)
type of mount: putaway execution
coupling system: flexible disk

fuel system: fuel type: diesel
fuel tank: 1000 l
autonomy: 7 hours

dimensions and weight:
length: 5960 mm
height: 2856 mm
width: 2622 mm
: weight 11895
sound pressure level: 85 +/-2.4 db(a) at 7 m

control m5:
manual control panel with digital auto-start and four - or double pole thermomagnetic circuit breaker (depending on the voltage), as well as differential relay. digital control unit cem7

optional (not included): automatic control panel with switching and network management. on the power unit and the control panel is displayed. digital control unit cem7 + cec7

#stromaggregat #stromerzeuger #notstromaggregat #aggregat #genset #generator #alternator #netzersatz #nea #haubenaggregat #haube #hoods #himoinsa #dieselnotstrom #dieselnotstromaggregat #aggregat       1030 KVA GENERATOR (HOOD UNIT) PERFORMANCE: 1030 KVA / 824 KW PRP OPERATING MODE: 1500 R.P.M VOLTAGE: 400 V / 230 V AVAILABLE VOLTAGES: 230 230 / 132 V POWER FACTOR: COS PHI 0.8 ENGINE: ENGINE MANUFACTURER: MITSUBISHI ENGINE MODEL: S12H PTA ENGINE TYPE: FOUR-STROKE DIESEL TYPE OF INJECTION: DIRECT KIND OF ASPIRATION: TURBOCHARGER AND SUBSEQUENT COOLING CYLINDER, NUMBER AND LAYOUT: 12 V TOTAL CAPACITY: 37,11 L COOLING SYSTEM: WATER SPECIFICATIONS ENGINE OIL: API CD OR CF SAE 30 OR SAE 40 FUEL CONSUMPTION 100% PRP: 216,75 L / H FUEL CONSUMPTION 75% PRP: 166,78 L / H FUEL CONSUMPTION 50% PRP: 117,52 L / H OIL CONSUMPTION UNDER FULL LOAD: 0.8 G / KWH CONTROLS: ELECTRONIC INNER DIAMETER OUTPUT EXHAUST PIPE: 212 MM ALTERNATOR: BUILDER: MANUFACTURER: STAMFORD POLES: 4 CONNECTION TYPE (DEFAULT): STAR - SERIES CLUTCH TYPE: S-0 18 " INSULATION PROTECTION CLASS: CLASS H MECHANICAL PROTECTION TYPE (ACC. TO IEC-34-5): IP 23 CONTROL SYSTEM: SELBSTERREGT, WITHOUT BRUSHES VOLTAGE REGULATOR: A.V.R. (ELECTRONIC) TYPE OF MOUNT: PUTAWAY EXECUTION COUPLING SYSTEM: FLEXIBLE DISK FUEL SYSTEM: FUEL TYPE: DIESEL FUEL TANK: 1000 L AUTONOMY: 7 HOURS DIMENSIONS AND WEIGHT: LENGTH: 5960 MM HEIGHT: 2856 MM WIDTH: 2622 MM : WEIGHT 11895 SOUND PRESSURE LEVEL: 85 +/-2.4 DB(A) AT 7 M CONTROL M5: MANUAL CONTROL PANEL WITH DIGITAL AUTO-START AND FOUR - OR DOUBLE POLE THERMOMAGNETIC CIRCUIT BREAKER (DEPENDING ON THE VOLTAGE), AS WELL AS DIFFERENTIAL RELAY. DIGITAL CONTROL UNIT CEM7 OPTIONAL (NOT INCLUDED): AUTOMATIC CONTROL PANEL WITH SWITCHING AND NETWORK MANAGEMENT. ON THE POWER UNIT AND THE CONTROL PANEL IS DISPLAYED. DIGITAL CONTROL UNIT CEM7 + CEC7 #STROMAGGREGAT #STROMERZEUGER #NOTSTROMAGGREGAT #AGGREGAT #GENSET #GENERATOR #ALTERNATOR #NETZERSATZ #NEA #HAUBENAGGREGAT #HAUBE #HOODS #HIMOINSA #DIESELNOTSTROM #DIESELNOTSTROMAGGREGAT #AGGREGAT
Vendedor: H & N Energien GmbH
Año de construcción: usado
Precio: 23.000 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 158.595 €
Ubicación: Land-generator 881 kva (hood unit) power: kva 705 / 705 kw prp
operating mode: 1500 r.p.m
voltage: 400 v / 230 v
available voltages: 230 230 / 132 v
power factor: cos phi 0.8

engine:
engine manufacturer: mitsubishi
engine model: s12a2 pta2
engine type: four-stroke diesel
type of injection: direct
kind of aspiration: turbocharger and subsequent cooling
cylinder, number and layout: 12 v
total displacement: 33.93 l
cooling system: water
specifications engine oil: api cd or cf sae 30 or sae 40
fuel consumption 100% prp: 195 l / h
fuel consumption 75% prp: 147 l / h

oil consumption under full load: 0.8 g / kwh
controls: electronic
inner diameter output exhaust pipe: 212 mm

alternator:
builder: manufacturer: stamford
poles: 4
connection type (default): star - series
clutch type: s-0 18 "
insulation protection class: class h
mechanical protection type (acc. to iec-34-5): ip 23
control system: selbsterregt, without brushes
voltage regulator: a.v.r. (electronic)
type of mount: putaway execution
coupling system: flexible disk

fuel system: fuel type: diesel
fuel tank: 1000 l
autonomy: 7 hours

dimensions and weight:
length: 5960 mm
height: 2856 mm
width: 2622 mm
weight: 9435 kg
sound level: 82 +/-2.4 db(a) at 7 m

control m5:
manual control panel with digital auto-start and four - or double pole thermomagnetic circuit breaker (depending on the voltage), as well as differential relay. digital control unit cem7

optional (not included): automatic control panel with switching and network management. on the power unit and the control panel is displayed. digital control unit cem7 + cec7

#stromaggregat #stromerzeuger #notstromaggregat #aggregat #genset #generator #alternator #netzersatz #nea #haubenaggregat #haube #hoods #himoinsa #dieselnotstrom #dieselnotstromaggregat #aggregat        GENERATOR 881 KVA (HOOD UNIT) POWER: KVA 705 / 705 KW PRP OPERATING MODE: 1500 R.P.M VOLTAGE: 400 V / 230 V AVAILABLE VOLTAGES: 230 230 / 132 V POWER FACTOR: COS PHI 0.8 ENGINE: ENGINE MANUFACTURER: MITSUBISHI ENGINE MODEL: S12A2 PTA2 ENGINE TYPE: FOUR-STROKE DIESEL TYPE OF INJECTION: DIRECT KIND OF ASPIRATION: TURBOCHARGER AND SUBSEQUENT COOLING CYLINDER, NUMBER AND LAYOUT: 12 V TOTAL DISPLACEMENT: 33.93 L COOLING SYSTEM: WATER SPECIFICATIONS ENGINE OIL: API CD OR CF SAE 30 OR SAE 40 FUEL CONSUMPTION 100% PRP: 195 L / H FUEL CONSUMPTION 75% PRP: 147 L / H OIL CONSUMPTION UNDER FULL LOAD: 0.8 G / KWH CONTROLS: ELECTRONIC INNER DIAMETER OUTPUT EXHAUST PIPE: 212 MM ALTERNATOR: BUILDER: MANUFACTURER: STAMFORD POLES: 4 CONNECTION TYPE (DEFAULT): STAR - SERIES CLUTCH TYPE: S-0 18 " INSULATION PROTECTION CLASS: CLASS H MECHANICAL PROTECTION TYPE (ACC. TO IEC-34-5): IP 23 CONTROL SYSTEM: SELBSTERREGT, WITHOUT BRUSHES VOLTAGE REGULATOR: A.V.R. (ELECTRONIC) TYPE OF MOUNT: PUTAWAY EXECUTION COUPLING SYSTEM: FLEXIBLE DISK FUEL SYSTEM: FUEL TYPE: DIESEL FUEL TANK: 1000 L AUTONOMY: 7 HOURS DIMENSIONS AND WEIGHT: LENGTH: 5960 MM HEIGHT: 2856 MM WIDTH: 2622 MM WEIGHT: 9435 KG SOUND LEVEL: 82 +/-2.4 DB(A) AT 7 M CONTROL M5: MANUAL CONTROL PANEL WITH DIGITAL AUTO-START AND FOUR - OR DOUBLE POLE THERMOMAGNETIC CIRCUIT BREAKER (DEPENDING ON THE VOLTAGE), AS WELL AS DIFFERENTIAL RELAY. DIGITAL CONTROL UNIT CEM7 OPTIONAL (NOT INCLUDED): AUTOMATIC CONTROL PANEL WITH SWITCHING AND NETWORK MANAGEMENT. ON THE POWER UNIT AND THE CONTROL PANEL IS DISPLAYED. DIGITAL CONTROL UNIT CEM7 + CEC7 #STROMAGGREGAT #STROMERZEUGER #NOTSTROMAGGREGAT #AGGREGAT #GENSET #GENERATOR #ALTERNATOR #NETZERSATZ #NEA #HAUBENAGGREGAT #HAUBE #HOODS #HIMOINSA #DIESELNOTSTROM #DIESELNOTSTROMAGGREGAT #AGGREGAT
Vendedor: H & N Energien GmbH
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 12000; engine: mitsubishi s12h-pta; accessories: switching panel, volt meter, ampere meter, hertz meter, start battery, exhaust system; power type: 4000002 ; GROSS WEIGHT [KG]: 12000; ENGINE: MITSUBISHI S12H-PTA; ACCESSORIES: SWITCHING PANEL, VOLT METER, AMPERE METER, HERTZ METER, START BATTERY, EXHAUST SYSTEM; POWER TYPE: 4000002
Vendedor: BREDENOORD
Año de construcción: usado
Precio: 140.050 €
Ubicación: Land-generator 775 kva (hood unit) power: kva 775 / 620 kw prp
operating mode: 1500 r.p.m
voltage: 400 v / 230 v
available voltages: 230 230 / 132 v
power factor: cos phi 0.8

engine:
engine manufacturer: mitsubishi
engine model: s12a2 pta
engine type: four-stroke diesel
type of injection: direct
kind of aspiration: turbocharger and subsequent cooling
cylinder, number and layout: 12 v
total displacement: 33.93 l
cooling system: water
specifications engine oil: api cd or cf sae 30 or sae 40
fuel consumption 100% prp: 166,24 l / h
fuel consumption 75% prp: 125,46 l / h
fuel consumption 50% prp: 88,31 l / h
oil consumption under full load: 0.8 g / kwh
controls: electronic
inner diameter output exhaust pipe: 212 mm

alternator:
builder: manufacturer: stamford
poles: 4
connection type (default): star - series
clutch type: s-0 18 "
insulation protection class: class h
mechanical protection type (acc. to iec-34-5): ip 23
control system: selbsterregt, without brushes
voltage regulator: a.v.r. (electronic)
type of mount: putaway execution
coupling system: flexible disk

fuel system: fuel type: diesel
fuel tank: 1000 l
autonomy: 8 hours

dimensions and weight:
length: 5960 mm
height: 2856 mm
width: 2622 mm
weight: 9435 kg
sound pressure level: 80 +/-2.4 db(a) at 7 m

control m5:
manual control panel with digital auto-start and four - or double pole thermomagnetic circuit breaker (depending on the voltage), as well as differential relay. digital control unit cem7

optional (not included): automatic control panel with switching and network management. on the power unit and the control panel is displayed. digital control unit cem7 + cec7

#stromaggregat #stromerzeuger #notstromaggregat #aggregat #genset #generator #alternator #netzersatz #nea #haubenaggregat #haube #hoods #himoinsa #dieselnotstrom #dieselnotstromaggregat #aggregat       GENERATOR 775 KVA (HOOD UNIT) POWER: KVA 775 / 620 KW PRP OPERATING MODE: 1500 R.P.M VOLTAGE: 400 V / 230 V AVAILABLE VOLTAGES: 230 230 / 132 V POWER FACTOR: COS PHI 0.8 ENGINE: ENGINE MANUFACTURER: MITSUBISHI ENGINE MODEL: S12A2 PTA ENGINE TYPE: FOUR-STROKE DIESEL TYPE OF INJECTION: DIRECT KIND OF ASPIRATION: TURBOCHARGER AND SUBSEQUENT COOLING CYLINDER, NUMBER AND LAYOUT: 12 V TOTAL DISPLACEMENT: 33.93 L COOLING SYSTEM: WATER SPECIFICATIONS ENGINE OIL: API CD OR CF SAE 30 OR SAE 40 FUEL CONSUMPTION 100% PRP: 166,24 L / H FUEL CONSUMPTION 75% PRP: 125,46 L / H FUEL CONSUMPTION 50% PRP: 88,31 L / H OIL CONSUMPTION UNDER FULL LOAD: 0.8 G / KWH CONTROLS: ELECTRONIC INNER DIAMETER OUTPUT EXHAUST PIPE: 212 MM ALTERNATOR: BUILDER: MANUFACTURER: STAMFORD POLES: 4 CONNECTION TYPE (DEFAULT): STAR - SERIES CLUTCH TYPE: S-0 18 " INSULATION PROTECTION CLASS: CLASS H MECHANICAL PROTECTION TYPE (ACC. TO IEC-34-5): IP 23 CONTROL SYSTEM: SELBSTERREGT, WITHOUT BRUSHES VOLTAGE REGULATOR: A.V.R. (ELECTRONIC) TYPE OF MOUNT: PUTAWAY EXECUTION COUPLING SYSTEM: FLEXIBLE DISK FUEL SYSTEM: FUEL TYPE: DIESEL FUEL TANK: 1000 L AUTONOMY: 8 HOURS DIMENSIONS AND WEIGHT: LENGTH: 5960 MM HEIGHT: 2856 MM WIDTH: 2622 MM WEIGHT: 9435 KG SOUND PRESSURE LEVEL: 80 +/-2.4 DB(A) AT 7 M CONTROL M5: MANUAL CONTROL PANEL WITH DIGITAL AUTO-START AND FOUR - OR DOUBLE POLE THERMOMAGNETIC CIRCUIT BREAKER (DEPENDING ON THE VOLTAGE), AS WELL AS DIFFERENTIAL RELAY. DIGITAL CONTROL UNIT CEM7 OPTIONAL (NOT INCLUDED): AUTOMATIC CONTROL PANEL WITH SWITCHING AND NETWORK MANAGEMENT. ON THE POWER UNIT AND THE CONTROL PANEL IS DISPLAYED. DIGITAL CONTROL UNIT CEM7 + CEC7 #STROMAGGREGAT #STROMERZEUGER #NOTSTROMAGGREGAT #AGGREGAT #GENSET #GENERATOR #ALTERNATOR #NETZERSATZ #NEA #HAUBENAGGREGAT #HAUBE #HOODS #HIMOINSA #DIESELNOTSTROM #DIESELNOTSTROMAGGREGAT #AGGREGAT
Vendedor: H & N Energien GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 1.000 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 2500 x 830 x 2200 mm<br/>description: . WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 2500 X 830 X 2200 MM
DESCRIPTION: .
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 124.455 €
Ubicación: Land-generator 761 kva (hood unit) power: kva 761 / 609 kw prp
operating mode: 1500 r.p.m
voltage: 400 v / 230 v
available voltages: 230 230 / 132 v
power factor: cos phi 0.8

engine:
engine manufacturer: mitsubishi
engine model: s6r2 ptaa
engine type: four-stroke diesel
type of injection: direct
kind of aspiration: turbocharger and subsequent cooling
cylinder, number and layout: 6 l
total displacement: 29,96 l
cooling system: water
specifications engine oil: api cd or cf sae 30 or sae 40
fuel consumption 100% prp: 157,08 l / h
fuel consumption 75% prp: 118,58 l / h
fuel consumption 50% prp: 82,11 l / h
oil consumption under full load: 0.8 g / kwh
controls: electronic
inner diameter exhaust pipe output: 205 mm

alternator:
builder: manufacturer: stamford
poles: 4
connection type (default): star - series
clutch type: s-0 18 "
insulation protection class: class h
mechanical protection type (acc. to iec-34-5): ip 23
control system: selbsterregt, without brushes
voltage regulator: a.v.r. (electronic)
type of mount: putaway execution
coupling system: flexible disk

fuel system: fuel type: diesel
fuel tank: 1000 l
autonomy: 8 hours

dimensions and weight:
length: 5960 mm
height: 2856 mm
width: 2622 mm
weight: 9435 kg
sound level: 82 +/-2.4 db(a) at 7 m

control m5:
manual control panel with digital auto-start and four - or double pole thermomagnetic circuit breaker (depending on the voltage), as well as differential relay. digital control unit cem7

optional (not included): automatic control panel with switching and network management. on the power unit and the control panel is displayed. digital control unit cem7 + cec7

#stromaggregat #stromerzeuger #notstromaggregat #aggregat #genset #generator #alternator #netzersatz #nea #haubenaggregat #haube #hoods #himoinsa #dieselnotstrom #dieselnotstromaggregat #aggregat      GENERATOR 761 KVA (HOOD UNIT) POWER: KVA 761 / 609 KW PRP OPERATING MODE: 1500 R.P.M VOLTAGE: 400 V / 230 V AVAILABLE VOLTAGES: 230 230 / 132 V POWER FACTOR: COS PHI 0.8 ENGINE: ENGINE MANUFACTURER: MITSUBISHI ENGINE MODEL: S6R2 PTAA ENGINE TYPE: FOUR-STROKE DIESEL TYPE OF INJECTION: DIRECT KIND OF ASPIRATION: TURBOCHARGER AND SUBSEQUENT COOLING CYLINDER, NUMBER AND LAYOUT: 6 L TOTAL DISPLACEMENT: 29,96 L COOLING SYSTEM: WATER SPECIFICATIONS ENGINE OIL: API CD OR CF SAE 30 OR SAE 40 FUEL CONSUMPTION 100% PRP: 157,08 L / H FUEL CONSUMPTION 75% PRP: 118,58 L / H FUEL CONSUMPTION 50% PRP: 82,11 L / H OIL CONSUMPTION UNDER FULL LOAD: 0.8 G / KWH CONTROLS: ELECTRONIC INNER DIAMETER EXHAUST PIPE OUTPUT: 205 MM ALTERNATOR: BUILDER: MANUFACTURER: STAMFORD POLES: 4 CONNECTION TYPE (DEFAULT): STAR - SERIES CLUTCH TYPE: S-0 18 " INSULATION PROTECTION CLASS: CLASS H MECHANICAL PROTECTION TYPE (ACC. TO IEC-34-5): IP 23 CONTROL SYSTEM: SELBSTERREGT, WITHOUT BRUSHES VOLTAGE REGULATOR: A.V.R. (ELECTRONIC) TYPE OF MOUNT: PUTAWAY EXECUTION COUPLING SYSTEM: FLEXIBLE DISK FUEL SYSTEM: FUEL TYPE: DIESEL FUEL TANK: 1000 L AUTONOMY: 8 HOURS DIMENSIONS AND WEIGHT: LENGTH: 5960 MM HEIGHT: 2856 MM WIDTH: 2622 MM WEIGHT: 9435 KG SOUND LEVEL: 82 +/-2.4 DB(A) AT 7 M CONTROL M5: MANUAL CONTROL PANEL WITH DIGITAL AUTO-START AND FOUR - OR DOUBLE POLE THERMOMAGNETIC CIRCUIT BREAKER (DEPENDING ON THE VOLTAGE), AS WELL AS DIFFERENTIAL RELAY. DIGITAL CONTROL UNIT CEM7 OPTIONAL (NOT INCLUDED): AUTOMATIC CONTROL PANEL WITH SWITCHING AND NETWORK MANAGEMENT. ON THE POWER UNIT AND THE CONTROL PANEL IS DISPLAYED. DIGITAL CONTROL UNIT CEM7 + CEC7 #STROMAGGREGAT #STROMERZEUGER #NOTSTROMAGGREGAT #AGGREGAT #GENSET #GENERATOR #ALTERNATOR #NETZERSATZ #NEA #HAUBENAGGREGAT #HAUBE #HOODS #HIMOINSA #DIESELNOTSTROM #DIESELNOTSTROMAGGREGAT #AGGREGAT
Vendedor: H & N Energien GmbH
Año de construcción: usado
Precio: 3.950 €
Ubicación: Land-; gross weight [kg]: 520; engine: mitsubishi s4l2; accessories: switching panel, volt meter, ampere meter, hertz meter, start battery, exhaust system; power type: 4000002 ; GROSS WEIGHT [KG]: 520; ENGINE: MITSUBISHI S4L2; ACCESSORIES: SWITCHING PANEL, VOLT METER, AMPERE METER, HERTZ METER, START BATTERY, EXHAUST SYSTEM; POWER TYPE: 4000002
Vendedor: BREDENOORD
Año de construcción: usado
Precio: 107.489 €
Ubicación: Land-generator 670 kva (hood unit) power: 670 kva / 536 kw prp
operating mode: 1500 r.p.m
voltage: 400 v / 230 v
available voltages: 230 230 / 132 v
power factor: cos phi 0.8

engine:
engine manufacturer: mitsubishi
engine model: s6r2 pta
engine type: four-stroke diesel
type of injection: direct
kind of aspiration: turbocharger and subsequent cooling
cylinder, number and layout: 6 l
total displacement: 29,96 l
cooling system: water
specifications engine oil: api cd or cf sae 30 or sae 40
fuel consumption 100% prp: 136.4 l / h
fuel consumption 75% prp: 104,34 l / h
fuel consumption 50% prp: 74,56 l / h
oil consumption under full load: 0.8 g / kwh
controls: electronic
inner diameter exhaust pipe output: 205 mm

alternator:
builder: manufacturer: stamford
poles: 4
connection type (default): star - series
clutch type: s-0 18 "
insulation protection class: class h
mechanical protection type (acc. to iec-34-5): ip 23
control system: selbsterregt, without brushes
voltage regulator: a.v.r. (electronic)
type of mount: putaway execution
coupling system: flexible disk

fuel system: fuel type: diesel
fuel tank: 950 litres
autonomy: 10 hours

dimensions and weight:
length: 5000 mm
height: 2369 mm
width: 2100 mm
weight: 6739 kg
sound level: 78 +/-2.4 db(a) at 7 m

control m5:
manual control panel with digital auto-start and four - or double pole thermomagnetic circuit breaker (depending on the voltage), as well as differential relay. digital control unit cem7

optional (not included): automatic control panel with switching and network management. on the power unit and the control panel is displayed. digital control unit cem7 + cec7

#stromaggregat #stromerzeuger #notstromaggregat #aggregat #genset #generator #alternator #netzersatz #nea #haubenaggregat #haube #hoods #himoinsa #dieselnotstrom #dieselnotstromaggregat #aggregat     GENERATOR 670 KVA (HOOD UNIT) POWER: 670 KVA / 536 KW PRP OPERATING MODE: 1500 R.P.M VOLTAGE: 400 V / 230 V AVAILABLE VOLTAGES: 230 230 / 132 V POWER FACTOR: COS PHI 0.8 ENGINE: ENGINE MANUFACTURER: MITSUBISHI ENGINE MODEL: S6R2 PTA ENGINE TYPE: FOUR-STROKE DIESEL TYPE OF INJECTION: DIRECT KIND OF ASPIRATION: TURBOCHARGER AND SUBSEQUENT COOLING CYLINDER, NUMBER AND LAYOUT: 6 L TOTAL DISPLACEMENT: 29,96 L COOLING SYSTEM: WATER SPECIFICATIONS ENGINE OIL: API CD OR CF SAE 30 OR SAE 40 FUEL CONSUMPTION 100% PRP: 136.4 L / H FUEL CONSUMPTION 75% PRP: 104,34 L / H FUEL CONSUMPTION 50% PRP: 74,56 L / H OIL CONSUMPTION UNDER FULL LOAD: 0.8 G / KWH CONTROLS: ELECTRONIC INNER DIAMETER EXHAUST PIPE OUTPUT: 205 MM ALTERNATOR: BUILDER: MANUFACTURER: STAMFORD POLES: 4 CONNECTION TYPE (DEFAULT): STAR - SERIES CLUTCH TYPE: S-0 18 " INSULATION PROTECTION CLASS: CLASS H MECHANICAL PROTECTION TYPE (ACC. TO IEC-34-5): IP 23 CONTROL SYSTEM: SELBSTERREGT, WITHOUT BRUSHES VOLTAGE REGULATOR: A.V.R. (ELECTRONIC) TYPE OF MOUNT: PUTAWAY EXECUTION COUPLING SYSTEM: FLEXIBLE DISK FUEL SYSTEM: FUEL TYPE: DIESEL FUEL TANK: 950 LITRES AUTONOMY: 10 HOURS DIMENSIONS AND WEIGHT: LENGTH: 5000 MM HEIGHT: 2369 MM WIDTH: 2100 MM WEIGHT: 6739 KG SOUND LEVEL: 78 +/-2.4 DB(A) AT 7 M CONTROL M5: MANUAL CONTROL PANEL WITH DIGITAL AUTO-START AND FOUR - OR DOUBLE POLE THERMOMAGNETIC CIRCUIT BREAKER (DEPENDING ON THE VOLTAGE), AS WELL AS DIFFERENTIAL RELAY. DIGITAL CONTROL UNIT CEM7 OPTIONAL (NOT INCLUDED): AUTOMATIC CONTROL PANEL WITH SWITCHING AND NETWORK MANAGEMENT. ON THE POWER UNIT AND THE CONTROL PANEL IS DISPLAYED. DIGITAL CONTROL UNIT CEM7 + CEC7 #STROMAGGREGAT #STROMERZEUGER #NOTSTROMAGGREGAT #AGGREGAT #GENSET #GENERATOR #ALTERNATOR #NETZERSATZ #NEA #HAUBENAGGREGAT #HAUBE #HOODS #HIMOINSA #DIESELNOTSTROM #DIESELNOTSTROMAGGREGAT #AGGREGAT
Vendedor: H & N Energien GmbH
Año de construcción: usado
Ubicación: Land-; power [ps]: 19; engine: mitsubishi s4l2-61sd ; POWER [PS]: 19; ENGINE: MITSUBISHI S4L2-61SD
Vendedor: BREDENOORD
Año de construcción: usado
Ubicación: Land-cell phone case processing line

(tapping center/engraving machine)

 

 1 tapping center x13sets

make:yujiint(korea)

year:2014

model:ut360d 

table:650×400mm×2set 

table loading weight:250kg 

tarvel(x-y-z):520×360×480mm 

spindle speed:24,000rpm

atc:tool storage 14ea

top cover

air gun

nc controller:mitsubishi m700

 

2 tapping center x20sets

make:yujiint(korea)

year:2014

model:ut360d 

table:650×400mm×2set 

table loading weight:250kg

tarvel(x-y-z):520×360×480mm

spindle speed:15,000rpm

atc:tool storage 14ea

top cover

air gun

nc controller:mitsubishi m700

 

3 tapping center x5sets

 make:doosan(korea)

year:2014

model:dt360d 

table:650×375mm×2set 

table loading weight:200kg 

tarvel(x-y-z):520×360×350mm 

spindle speed:12,000rpm 

atc:tool storage 

air blower 

air gun

 rotary joint

nc controller:

doosan fanuc i series

 

4 tapping center x2sets

make:doosan(korea)

year:2014

table:650×375mm×2set 

table loading weight:200kg 

tarvel(x-y-z):520×360×350mm

spindle speed:24,000rpm

atc:tool storage 14ea

air blower

air gun

rotary joint

nc controller:

doosan fanuc i series

 

5 engraving machine  x10sets

make:gs(korea)

year:2014

 model:g42 

2 spindle type

t-table:400×300mm×2set

tarvel(x-y-z):400×300×150mm

spindle speed:30,000rpm

speed:30,000mm/min

water cooler

nc controller:cs cam

 

6 cnc video measuring system

 make:nikon(japan)

year:2014

 model:i-nexiv-vma-2520

stroke(x-y-z):250×200×200mm

readout:0.1?(max.)

workingpiece weight:15kg(max.)

camera

working distance:73.5mm

host computer

cpu memory:4gb & monitor

 

7 air compressor 

make:yuchang(korea)

year:2014

screw air compressor(comp korea)

pressure:9kg/?

main motor:75kw

 

8 engraving machine x10sets

make:gs(korea)

year:2014 

model:g42 

2 spindle type 

t-table:400×300mm×2set 

tarvel(x-y-z):400×300×150mm

spindle speed:30,000rpm

speed30,000mm/min

water cooler

nc controller:cs cam

 

9 injection moulding m/c

make:woojin(korea)

year:2013

 model:sm-280 

clamping force:280ton 

clamping stroke:280mm 

tia-bar:610×610 

mold thickness:250~650mm 

hopper dryer

hopper loader

q.m.c controller

 

10 robot x5sets

make:yudo(korea) 

year:2013

model:ezi-1000?

 

11 robot

make: yudo(korea)

year:2013

model:ex-800sv 

 

14 hot runner controller x6sets

make:yudo(korea) 

year:2013

model:cw662 

16zone 

 

15 injection moulding m/c 

make:woojin(korea)

year:2013

model:th220m 

 (ih 5.2t) 

clamping force:220ton 

 2157kn

clamping stroke:220mm

tia-bar:560×560

mold thickness:200~600mm

hopper dryer

hopper loader

q.m.c controller

 

20 conveyor belt 

make:yulim(korea)

year:2012

w400×5000lmm w400x5500lmm
 CELL PHONE CASE PROCESSING LINE (TAPPING CENTER/ENGRAVING MACHINE) 1 TAPPING CENTER X13SETS MAKE:YUJIINT(KOREA) YEAR:2014 MODEL:UT360D TABLE:650×400MM×2SET TABLE LOADING WEIGHT:250KG TARVEL(X-Y-Z):520×360×480MM SPINDLE SPEED:24,000RPM ATC:TOOL STORAGE 14EA TOP COVER AIR GUN NC CONTROLLER:MITSUBISHI M700 2 TAPPING CENTER X20SETS MAKE:YUJIINT(KOREA) YEAR:2014 MODEL:UT360D TABLE:650×400MM×2SET TABLE LOADING WEIGHT:250KG TARVEL(X-Y-Z):520×360×480MM SPINDLE SPEED:15,000RPM ATC:TOOL STORAGE 14EA TOP COVER AIR GUN NC CONTROLLER:MITSUBISHI M700 3 TAPPING CENTER X5SETS MAKE:DOOSAN(KOREA) YEAR:2014 MODEL:DT360D TABLE:650×375MM×2SET TABLE LOADING WEIGHT:200KG TARVEL(X-Y-Z):520×360×350MM SPINDLE SPEED:12,000RPM ATC:TOOL STORAGE AIR BLOWER AIR GUN ROTARY JOINT NC CONTROLLER: DOOSAN FANUC I SERIES 4 TAPPING CENTER X2SETS MAKE:DOOSAN(KOREA) YEAR:2014 TABLE:650×375MM×2SET TABLE LOADING WEIGHT:200KG TARVEL(X-Y-Z):520×360×350MM SPINDLE SPEED:24,000RPM ATC:TOOL STORAGE 14EA AIR BLOWER AIR GUN ROTARY JOINT NC CONTROLLER: DOOSAN FANUC I SERIES 5 ENGRAVING MACHINE X10SETS MAKE:GS(KOREA) YEAR:2014 MODEL:G42 2 SPINDLE TYPE T-TABLE:400×300MM×2SET TARVEL(X-Y-Z):400×300×150MM SPINDLE SPEED:30,000RPM SPEED:30,000MM/MIN WATER COOLER NC CONTROLLER:CS CAM 6 CNC VIDEO MEASURING SYSTEM MAKE:NIKON(JAPAN) YEAR:2014 MODEL:I-NEXIV-VMA-2520 STROKE(X-Y-Z):250×200×200MM READOUT:0.1?(MAX.) WORKINGPIECE WEIGHT:15KG(MAX.) CAMERA WORKING DISTANCE:73.5MM HOST COMPUTER CPU MEMORY:4GB & MONITOR 7 AIR COMPRESSOR MAKE:YUCHANG(KOREA) YEAR:2014 SCREW AIR COMPRESSOR(COMP KOREA) PRESSURE:9KG/? MAIN MOTOR:75KW 8 ENGRAVING MACHINE X10SETS MAKE:GS(KOREA) YEAR:2014 MODEL:G42 2 SPINDLE TYPE T-TABLE:400×300MM×2SET TARVEL(X-Y-Z):400×300×150MM SPINDLE SPEED:30,000RPM SPEED30,000MM/MIN WATER COOLER NC CONTROLLER:CS CAM 9 INJECTION MOULDING M/C MAKE:WOOJIN(KOREA) YEAR:2013 MODEL:SM-280 CLAMPING FORCE:280TON CLAMPING STROKE:280MM TIA-BAR:610×610 MOLD THICKNESS:250~650MM HOPPER DRYER HOPPER LOADER Q.M.C CONTROLLER 10 ROBOT X5SETS MAKE:YUDO(KOREA) YEAR:2013 MODEL:EZI-1000? 11 ROBOT MAKE: YUDO(KOREA) YEAR:2013 MODEL:EX-800SV 14 HOT RUNNER CONTROLLER X6SETS MAKE:YUDO(KOREA) YEAR:2013 MODEL:CW662 16ZONE 15 INJECTION MOULDING M/C MAKE:WOOJIN(KOREA) YEAR:2013 MODEL:TH220M (IH 5.2T) CLAMPING FORCE:220TON 2157KN CLAMPING STROKE:220MM TIA-BAR:560×560 MOLD THICKNESS:200~600MM HOPPER DRYER HOPPER LOADER Q.M.C CONTROLLER 20 CONVEYOR BELT MAKE:YULIM(KOREA) YEAR:2012 W400×5000LMM W400X5500LMM
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-; power [ps]: 19; engine: mitsubishi s4l2-61sd ; POWER [PS]: 19; ENGINE: MITSUBISHI S4L2-61SD
Vendedor: BREDENOORD
Año de construcción: usado
Ubicación: Land-electric mat production line


1. matt and electric matt production line x 3sets

make:seongwoo(korea)

year;2014

dim': 2,500(w) × 17,000(l)m/m

cap': 1,000 set/day  (2,000mm × 1,400mm basis)

working width: 2,200m/m

1) uncoiler

   width: 2,200m/m

2) hot melt spray system × 3set

? hot melt t/k

   inverter(mitsubishi)

   motor: dc 0.2kw

   1,000w heater × 6ea

   1,000w unit heater × 6ea

   heating hose: 12m × 6ea

? spray equipment

limit switch

3) hot melt heating

   bottom heating: infrared carbon heater

cap': 3kw×3set

   dim': 20×2,200m/m

top heating: infrared carbon heater

cap': 3kw × 9set

   dim': 20 × 2,200m/m

4) conveyor belt 

   pvc(dg) belt : 2,030(w) × 34,000(l)m/m

 

2. matt and electric matt automatic cutting equipmentx3sets

 make:seongwoo(korea)

year;2014

dim': 3,300(w) × 2,100(l) × 1,800(h)m/m

cap': 500ea/hr

work width: max. 2,400m/m

side cutting inverter motor: 2.2kw

controller

 

3. heated wire arrangement equipment

make:rohas(korea)

year;2014

dim': 3,000(w) × 8,000(l) × 2,800(h)m/m

cap': 80sheet/hr

max. heat plate size: 2,000 × 2,600m/m

finger part: 68m/m chain gear

             arrangement drum × 2set

             0.4kw inverter motor

raw sheet feeding guide roller: 70m/m×12ea

drawing part: 150m/m rubber coating

roller × 2set

controller

 

4, heated wire arrangement equipment

make:rohas(korea)

year;2014

dim': 3,000(w) × 6,500(l) × 2,800(h)m/m

cap': 70sheet/hr

max. heat plate size: 2,000 × 1,500m/m

finger part: 34m/m chain gear

             arrangement drum × 2set

             0.4kw inverter motor

raw fabric supply guide roller: 70m/m×12ea

drawing part: 150m/m rubber coating

controller

 

5. laminating & rolling m/c 

make:rohas(korea)

year;2014

dim': 3,200(w) × 5,000(l)m/m

work width: max. 2,200m/m

speed: 30m/min

laminating compressing drum: 250m/m 

rubber coating transfer drum: 250m/m

side cutting motor × 2ea

main cutting motor × 1ea

rolling m/c
 ELECTRIC MAT PRODUCTION LINE 1. MATT AND ELECTRIC MATT PRODUCTION LINE X 3SETS MAKE:SEONGWOO(KOREA) YEAR;2014 DIM': 2,500(W) × 17,000(L)M/M CAP': 1,000 SET/DAY (2,000MM × 1,400MM BASIS) WORKING WIDTH: 2,200M/M 1) UNCOILER WIDTH: 2,200M/M 2) HOT MELT SPRAY SYSTEM × 3SET ? HOT MELT T/K INVERTER(MITSUBISHI) MOTOR: DC 0.2KW 1,000W HEATER × 6EA 1,000W UNIT HEATER × 6EA HEATING HOSE: 12M × 6EA ? SPRAY EQUIPMENT LIMIT SWITCH 3) HOT MELT HEATING BOTTOM HEATING: INFRARED CARBON HEATER CAP': 3KW×3SET DIM': 20×2,200M/M TOP HEATING: INFRARED CARBON HEATER CAP': 3KW × 9SET DIM': 20 × 2,200M/M 4) CONVEYOR BELT PVC(DG) BELT : 2,030(W) × 34,000(L)M/M 2. MATT AND ELECTRIC MATT AUTOMATIC CUTTING EQUIPMENTX3SETS MAKE:SEONGWOO(KOREA) YEAR;2014 DIM': 3,300(W) × 2,100(L) × 1,800(H)M/M CAP': 500EA/HR WORK WIDTH: MAX. 2,400M/M SIDE CUTTING INVERTER MOTOR: 2.2KW CONTROLLER 3. HEATED WIRE ARRANGEMENT EQUIPMENT MAKE:ROHAS(KOREA) YEAR;2014 DIM': 3,000(W) × 8,000(L) × 2,800(H)M/M CAP': 80SHEET/HR MAX. HEAT PLATE SIZE: 2,000 × 2,600M/M FINGER PART: 68M/M CHAIN GEAR ARRANGEMENT DRUM × 2SET 0.4KW INVERTER MOTOR RAW SHEET FEEDING GUIDE ROLLER: 70M/M×12EA DRAWING PART: 150M/M RUBBER COATING ROLLER × 2SET CONTROLLER 4, HEATED WIRE ARRANGEMENT EQUIPMENT MAKE:ROHAS(KOREA) YEAR;2014 DIM': 3,000(W) × 6,500(L) × 2,800(H)M/M CAP': 70SHEET/HR MAX. HEAT PLATE SIZE: 2,000 × 1,500M/M FINGER PART: 34M/M CHAIN GEAR ARRANGEMENT DRUM × 2SET 0.4KW INVERTER MOTOR RAW FABRIC SUPPLY GUIDE ROLLER: 70M/M×12EA DRAWING PART: 150M/M RUBBER COATING CONTROLLER 5. LAMINATING & ROLLING M/C MAKE:ROHAS(KOREA) YEAR;2014 DIM': 3,200(W) × 5,000(L)M/M WORK WIDTH: MAX. 2,200M/M SPEED: 30M/MIN LAMINATING COMPRESSING DRUM: 250M/M RUBBER COATING TRANSFER DRUM: 250M/M SIDE CUTTING MOTOR × 2EA MAIN CUTTING MOTOR × 1EA ROLLING M/C
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 3.950 €
Ubicación: Land-; gross weight [kg]: 520; engine: mitsubishi s4l2; accessories: switching panel, volt meter, ampere meter, hertz meter, start battery, exhaust system; power type: 4000002 ; GROSS WEIGHT [KG]: 520; ENGINE: MITSUBISHI S4L2; ACCESSORIES: SWITCHING PANEL, VOLT METER, AMPERE METER, HERTZ METER, START BATTERY, EXHAUST SYSTEM; POWER TYPE: 4000002
Vendedor: BREDENOORD
Año de construcción: usado
Precio: 20.000 €
Ubicación: Land-with a maintenance free ac motor, a large torque with a fantastic gradeability, powerful traction it ensures a smooth running even on the most rough roads and at the same time ensures a high level of comfort for the user.
max-8 is a multifunctional forklift with full free lift, that can lift up to 3,5 tonnes.

capacity        3500 kg.
power type	diesel
lift height	4500 mm.
closed height	2,20 m.
fork lenght	1220 mm.
manufacturer	ep equipment
engine	mitsubishi s4s motor
type of mast	triplex-mast with full free lift
emission class	euro iiia emission
attachment	sideshift
fuel tank	75 liter

please contact us for further information!
 WITH A MAINTENANCE FREE AC MOTOR, A LARGE TORQUE WITH A FANTASTIC GRADEABILITY, POWERFUL TRACTION IT ENSURES A SMOOTH RUNNING EVEN ON THE MOST ROUGH ROADS AND AT THE SAME TIME ENSURES A HIGH LEVEL OF COMFORT FOR THE USER. MAX-8 IS A MULTIFUNCTIONAL FORKLIFT WITH FULL FREE LIFT, THAT CAN LIFT UP TO 3,5 TONNES. CAPACITY 3500 KG. POWER TYPE DIESEL LIFT HEIGHT 4500 MM. CLOSED HEIGHT 2,20 M. FORK LENGHT 1220 MM. MANUFACTURER EP EQUIPMENT ENGINE MITSUBISHI S4S MOTOR TYPE OF MAST TRIPLEX-MAST WITH FULL FREE LIFT EMISSION CLASS EURO IIIA EMISSION ATTACHMENT SIDESHIFT FUEL TANK 75 LITER PLEASE CONTACT US FOR FURTHER INFORMATION!
Vendedor: MerchantSumborg AS
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 19620; engine: mitsubishi s12r-pta2; accessories: drip pan, switching panel, volt meter, ampere meter, hertz meter, start battery, exhaust system; power type: 4000002 ; GROSS WEIGHT [KG]: 19620; ENGINE: MITSUBISHI S12R-PTA2; ACCESSORIES: DRIP PAN, SWITCHING PANEL, VOLT METER, AMPERE METER, HERTZ METER, START BATTERY, EXHAUST SYSTEM; POWER TYPE: 4000002
Vendedor: BREDENOORD
Año de construcción: usado
Ubicación: Land-qapc, 
rci, 
alcolor dampening, 
chromed impression cylinders QAPC, RCI, ALCOLOR DAMPENING, CHROMED IMPRESSION CYLINDERS
Vendedor: Explus International (HK) Ltd
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 23000; engine: mitsubishi s16r-pta2; accessories: drip pan, switching panel, volt meter, ampere meter, hertz meter, start battery, exhaust system; power type: 4000002 ; GROSS WEIGHT [KG]: 23000; ENGINE: MITSUBISHI S16R-PTA2; ACCESSORIES: DRIP PAN, SWITCHING PANEL, VOLT METER, AMPERE METER, HERTZ METER, START BATTERY, EXHAUST SYSTEM; POWER TYPE: 4000002
Vendedor: BREDENOORD
Año de construcción: usado
Ubicación: Land-citizen cincom l25 (1998)

overview
brand: citizen
model: cincom l25
application type: turning
machine type: lathes
availability: immediately
production year: 1998
location: germany
origin country: japan
production hours: 69990

general data
measurements width: 2520 mm
measurements depth: 1100 mm
measurements height: 1700 mm
machine weight: 2500 kg

control unit
brand: mitsubishi
model: meldas 500
cnc main language: german
cnc language customizable: yes

main drive
number of spindles: 1
spindle speed range: 200-8000 rpm

movement
x-axis movement: 250 mm

tools
max tool diameter: 25 mm
max tool length: 250 mm

media
main electronic connection: 380 v
power consumption: 11 kva
chip conveyor: yes
internal cooling: yes

additional equipment
1: bar loader fmb turbo 5-42 CITIZEN CINCOM L25 (1998) OVERVIEW BRAND: CITIZEN MODEL: CINCOM L25 APPLICATION TYPE: TURNING MACHINE TYPE: LATHES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1998 LOCATION: GERMANY ORIGIN COUNTRY: JAPAN PRODUCTION HOURS: 69990 GENERAL DATA MEASUREMENTS WIDTH: 2520 MM MEASUREMENTS DEPTH: 1100 MM MEASUREMENTS HEIGHT: 1700 MM MACHINE WEIGHT: 2500 KG CONTROL UNIT BRAND: MITSUBISHI MODEL: MELDAS 500 CNC MAIN LANGUAGE: GERMAN CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 200-8000 RPM MOVEMENT X-AXIS MOVEMENT: 250 MM TOOLS MAX TOOL DIAMETER: 25 MM MAX TOOL LENGTH: 250 MM MEDIA MAIN ELECTRONIC CONNECTION: 380 V POWER CONSUMPTION: 11 KVA CHIP CONVEYOR: YES INTERNAL COOLING: YES ADDITIONAL EQUIPMENT 1: BAR LOADER FMB TURBO 5-42
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-7,9 t, short radius mini, hydr. quick coupler with powertilt, 3 buckets, rubber tyres; power [ps]: 58; gross weight [kg]: 7900; engine: mitsubishi4m40-tl; rear tyres remaining: 60; front tyres remaining: 60 7,9 T, SHORT RADIUS MINI, HYDR. QUICK COUPLER WITH POWERTILT, 3 BUCKETS, RUBBER TYRES; POWER [PS]: 58; GROSS WEIGHT [KG]: 7900; ENGINE: MITSUBISHI4M40-TL; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60
Vendedor: Kleinheider Baumaschinenhandel GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)