1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-max.gear diameter 1400mm
min.gear diameter 100mm
max.module 30
max.face width 2850mm
distance between centre   4000mm
face plate dia. 900mm
max.helix.angle  45deg.
centre height above bed 750mm
p motor 24 kw
machine weight 42 ton.
full complete
good working condition  MAX.GEAR DIAMETER 1400MM MIN.GEAR DIAMETER 100MM MAX.MODULE 30 MAX.FACE WIDTH 2850MM DISTANCE BETWEEN CENTRE 4000MM FACE PLATE DIA. 900MM MAX.HELIX.ANGLE 45DEG. CENTRE HEIGHT ABOVE BED 750MM P MOTOR 24 KW MACHINE WEIGHT 42 TON. FULL COMPLETE GOOD WORKING CONDITION
Vendedor: BRMACHINERY TRADING LP
Año de construcción: usado
Precio: 46.900 €
Ubicación: Land-manufacturer bollegraaf<br/>typ hbt 600/2000 x 21,986<br/>year of contruction 2000 (overhauled 2017)<br/>drive power 7,5 kw<br/>length infeed conveyor over all 6,723 mm<br/>length module infeed conveyor 5,500 mm<br/>height infeed conveyor over all 1,300 mm<br/>height side wall infeed conveyor 500 mm<br/>length elevating conveyor over all 13,923 mm<br/>lenght module elevating conveyor 13,300 mm<br/>height side wall elevating conveyor 800 mm<br/>gradient of elevating conveyor 30°<br/>length gooseneck 1,340 mm<br/>lenght module gooseneck 1,000<br/>slope of gooseneck 15°<br/>height drive shaft over ground approx.. 5,900 mm<br/>effective width 2,000 mm<br/>pit dimensions 9,900 x 2,750 x 1,300 mm (l x w x h)<br/>transport dimensions, dismantled  16,200 x 2,500 x 2,750 mm (l x w x h)<br/> <br/>overhaul work: <br/>? frame sandblasted, primed and repainted<br/>? chain guide rails renewed<br/>? chain will renewed<br/>? gears will renewed<br/>? rubber belt will renewed<br/> <br/>comments: the steel construction of the conveyor belt was completely overhauled. wearing parts such as chains, gears and rubber belt are renewed when the dimensions for the new location have been determined. at the customers request, the belt can be adapted, shortened or extended.<br/>inspections at our warehouse are possible after agreement. we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYP HBT 600/2000 X 21,986
YEAR OF CONTRUCTION 2000 (OVERHAULED 2017)
DRIVE POWER 7,5 KW
LENGTH INFEED CONVEYOR OVER ALL 6,723 MM
LENGTH MODULE INFEED CONVEYOR 5,500 MM
HEIGHT INFEED CONVEYOR OVER ALL 1,300 MM
HEIGHT SIDE WALL INFEED CONVEYOR 500 MM
LENGTH ELEVATING CONVEYOR OVER ALL 13,923 MM
LENGHT MODULE ELEVATING CONVEYOR 13,300 MM
HEIGHT SIDE WALL ELEVATING CONVEYOR 800 MM
GRADIENT OF ELEVATING CONVEYOR 30°
LENGTH GOOSENECK 1,340 MM
LENGHT MODULE GOOSENECK 1,000
SLOPE OF GOOSENECK 15°
HEIGHT DRIVE SHAFT OVER GROUND APPROX.. 5,900 MM
EFFECTIVE WIDTH 2,000 MM
PIT DIMENSIONS 9,900 X 2,750 X 1,300 MM (L X W X H)
TRANSPORT DIMENSIONS, DISMANTLED 16,200 X 2,500 X 2,750 MM (L X W X H)

OVERHAUL WORK:
? FRAME SANDBLASTED, PRIMED AND REPAINTED
? CHAIN GUIDE RAILS RENEWED
? CHAIN WILL RENEWED
? GEARS WILL RENEWED
? RUBBER BELT WILL RENEWED

COMMENTS: THE STEEL CONSTRUCTION OF THE CONVEYOR BELT WAS COMPLETELY OVERHAULED. WEARING PARTS SUCH AS CHAINS, GEARS AND RUBBER BELT ARE RENEWED WHEN THE DIMENSIONS FOR THE NEW LOCATION HAVE BEEN DETERMINED. AT THE CUSTOMERS REQUEST, THE BELT CAN BE ADAPTED, SHORTENED OR EXTENDED.
INSPECTIONS AT OUR WAREHOUSE ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 4.250 €
Ubicación: Land-trough belt conveyor in modular design, belt width 650 mm, length 6000 mm, smooth belt or profile belt available, demo as solid supports, suspension and
hopper is available as an option. other conveying lengths, as well as other belt width available. TROUGH BELT CONVEYOR IN MODULAR DESIGN, BELT WIDTH 650 MM, LENGTH 6000 MM, SMOOTH BELT OR PROFILE BELT AVAILABLE, DEMO AS SOLID SUPPORTS, SUSPENSION AND HOPPER IS AVAILABLE AS AN OPTION. OTHER CONVEYING LENGTHS, AS WELL AS OTHER BELT WIDTH AVAILABLE.
Vendedor: Schulz Maschinenbau
Año de construcción: usado
Ubicación: Land-overview technical data paper sorting line <br/>manufacturer bollegraaf<br/>year of construction 1999<br/>throughput rate 3 up to 6 tons/h, depending on material<br/>installation dimensions 10,000 x 19,000 x 8,000 mm (l x w x h)<br/>sorting cabin 6,500 x 4,900 x 3,150 mm (l x w x h), 4 sorting places, 6 disposal chutes, 4 bunker belts<br/><br/>1 piece feeding belt to the sorting line hbt 600-800 * 14.006 mm ? 30°<br/>1 piece sorting belt hbgt 800 * 15,000 mm ? 10° -0°<br/>4 pieces bunker belts hbt 800 /1,000 * 10,940 mm<br/><br/>comments: the sorting line was used for sorting paper fractions, but can also be used for various other sorting operations. the machines are in good condition and can be inspected at our warehouse.  further pictures and technical drawings are available on request.<br/> <br/>detailed information to the individual machines. <br/>technical data sorting cabin <br/>manufacturer bollegraaf<br/>equipment features 4 sorting places, 6 disposal chutes, 4 bunker belts<br/>assembly dimensions 6,500 x 4,900 x 3,150 mm (l x w x h)<br/>assembly area 72 m²<br/>construction modular construction with two doors and two rows of windows <br/>wall type sepalux 0-70-sp<br/>wall thickness 70 mm<br/>modul width 1,200 mm<br/> <br/>technical data feeding conveyor to the sorting belt, 1 piece <br/>manufacturer bollegraaf <br/>type hbt 600-800 * 14,006 mm 30°<br/>year of construction 1999<br/>driving motor 1,5 kw<br/>belt speed 1,5 up to 5,5 m/min. frequency-controlled<br/>length feeding conveyor 5,223 mm<br/>length elevating conveyor 8,783 mm<br/>grade 30°<br/>effecting width 800 mm<br/>height of side wall feeding conv. 500 mm<br/>height of side wall elevating conv. 800 mm<br/>spacing / hight of carrier 800 mm / 50 mm<br/> <br/>technical data sorting belt, 1 piece <br/>manufacturer bollegraaf <br/>type hbgt 800 * 15,000 mm  10° / 0°<br/>year of construction 1999<br/>driving motor 5,5 kw<br/>belt speed 12 up to 44 m/min.  frequency-controlled<br/>length sorting conveyor 15,000 mm<br/>effecting width 800 mm<br/>height of side wall feeding conv. 500 mm<br/>height of side wall sorting conv. 150 mm<br/> <br/>technical data bunker belts, 4 pieces <br/>manufacturer bollegraaf <br/>type hbt 800 /1,000 * 10,940 mm<br/>year of construction 1999<br/>driving motor 0,22 up to 0,9 kw<br/>belt speed 1 up to 4 m/min.  frequency-controlled<br/>length bunker conveyor 10,940 mm<br/>effecting width 800 mm<br/>height of side wall feeding conv. 2,000 mm OVERVIEW TECHNICAL DATA PAPER SORTING LINE
MANUFACTURER BOLLEGRAAF
YEAR OF CONSTRUCTION 1999
THROUGHPUT RATE 3 UP TO 6 TONS/H, DEPENDING ON MATERIAL
INSTALLATION DIMENSIONS 10,000 X 19,000 X 8,000 MM (L X W X H)
SORTING CABIN 6,500 X 4,900 X 3,150 MM (L X W X H), 4 SORTING PLACES, 6 DISPOSAL CHUTES, 4 BUNKER BELTS

1 PIECE FEEDING BELT TO THE SORTING LINE HBT 600-800 * 14.006 MM ? 30°
1 PIECE SORTING BELT HBGT 800 * 15,000 MM ? 10° -0°
4 PIECES BUNKER BELTS HBT 800 /1,000 * 10,940 MM

COMMENTS: THE SORTING LINE WAS USED FOR SORTING PAPER FRACTIONS, BUT CAN ALSO BE USED FOR VARIOUS OTHER SORTING OPERATIONS. THE MACHINES ARE IN GOOD CONDITION AND CAN BE INSPECTED AT OUR WAREHOUSE. FURTHER PICTURES AND TECHNICAL DRAWINGS ARE AVAILABLE ON REQUEST.

DETAILED INFORMATION TO THE INDIVIDUAL MACHINES.
TECHNICAL DATA SORTING CABIN
MANUFACTURER BOLLEGRAAF
EQUIPMENT FEATURES 4 SORTING PLACES, 6 DISPOSAL CHUTES, 4 BUNKER BELTS
ASSEMBLY DIMENSIONS 6,500 X 4,900 X 3,150 MM (L X W X H)
ASSEMBLY AREA 72 M²
CONSTRUCTION MODULAR CONSTRUCTION WITH TWO DOORS AND TWO ROWS OF WINDOWS
WALL TYPE SEPALUX 0-70-SP
WALL THICKNESS 70 MM
MODUL WIDTH 1,200 MM

TECHNICAL DATA FEEDING CONVEYOR TO THE SORTING BELT, 1 PIECE
MANUFACTURER BOLLEGRAAF
TYPE HBT 600-800 * 14,006 MM 30°
YEAR OF CONSTRUCTION 1999
DRIVING MOTOR 1,5 KW
BELT SPEED 1,5 UP TO 5,5 M/MIN. FREQUENCY-CONTROLLED
LENGTH FEEDING CONVEYOR 5,223 MM
LENGTH ELEVATING CONVEYOR 8,783 MM
GRADE 30°
EFFECTING WIDTH 800 MM
HEIGHT OF SIDE WALL FEEDING CONV. 500 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 800 MM
SPACING / HIGHT OF CARRIER 800 MM / 50 MM

TECHNICAL DATA SORTING BELT, 1 PIECE
MANUFACTURER BOLLEGRAAF
TYPE HBGT 800 * 15,000 MM 10° / 0°
YEAR OF CONSTRUCTION 1999
DRIVING MOTOR 5,5 KW
BELT SPEED 12 UP TO 44 M/MIN. FREQUENCY-CONTROLLED
LENGTH SORTING CONVEYOR 15,000 MM
EFFECTING WIDTH 800 MM
HEIGHT OF SIDE WALL FEEDING CONV. 500 MM
HEIGHT OF SIDE WALL SORTING CONV. 150 MM

TECHNICAL DATA BUNKER BELTS, 4 PIECES
MANUFACTURER BOLLEGRAAF
TYPE HBT 800 /1,000 * 10,940 MM
YEAR OF CONSTRUCTION 1999
DRIVING MOTOR 0,22 UP TO 0,9 KW
BELT SPEED 1 UP TO 4 M/MIN. FREQUENCY-CONTROLLED
LENGTH BUNKER CONVEYOR 10,940 MM
EFFECTING WIDTH 800 MM
HEIGHT OF SIDE WALL FEEDING CONV. 2,000 MM
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 115.000 €
Ubicación: Land-
machine type cnc lathe make nakamura type super ntj built in 2003 control type cnc storage france country of origin japan delivery time upon request of freight base from site technical details

turning diameter 190 mm turning length 700 mm control fanuc 18 itb speed 5,000 r/min rapid traverse rate: 16,40.6 (x, y, z) 15/11 kw main/counter spindle kw number tools 2 x 12 / 2 x 24 pcs 
tool holder directly number of axles 9-controlled st. 
driven tools 12 per turret conveyors mayfran eject of right kw clamping cylinder bar passage 82 duty hours 3000 h machine weight 13 tons of additional information

engine type: horizontal
 counter spindle
 clamping spindle: hainbuch modular gr 65 + 3 jaw chuck
 spannmitel counter spindle: hainbuch spanntop combi pull gr 65 + 3 jaw chuck
 y-axis +-45 mm
 b-axis +-91 â° on upper turret
 nt-nurse + nc kit
 feed blow out from the outside on main spindle coolant and air through the counter spindle
 precast grippers g/l 165 mm d 65 mm, 3 kg
 part on a tray
 handwheel

and 12-driven tool holders
 12 fixed holder
 spaenefoerderer MACHINE TYPE CNC LATHE MAKE NAKAMURA TYPE SUPER NTJ BUILT IN 2003 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN JAPAN DELIVERY TIME UPON REQUEST OF FREIGHT BASE FROM SITE TECHNICAL DETAILS TURNING DIAMETER 190 MM TURNING LENGTH 700 MM CONTROL FANUC 18 ITB SPEED 5,000 R/MIN RAPID TRAVERSE RATE: 16,40.6 (X, Y, Z) 15/11 KW MAIN/COUNTER SPINDLE KW NUMBER TOOLS 2 X 12 / 2 X 24 PCS TOOL HOLDER DIRECTLY NUMBER OF AXLES 9-CONTROLLED ST. DRIVEN TOOLS 12 PER TURRET CONVEYORS MAYFRAN EJECT OF RIGHT KW CLAMPING CYLINDER BAR PASSAGE 82 DUTY HOURS 3000 H MACHINE WEIGHT 13 TONS OF ADDITIONAL INFORMATION ENGINE TYPE: HORIZONTAL COUNTER SPINDLE CLAMPING SPINDLE: HAINBUCH MODULAR GR 65 + 3 JAW CHUCK SPANNMITEL COUNTER SPINDLE: HAINBUCH SPANNTOP COMBI PULL GR 65 + 3 JAW CHUCK Y-AXIS +-45 MM B-AXIS +-91 &ACIRC;&DEG; ON UPPER TURRET NT-NURSE + NC KIT FEED BLOW OUT FROM THE OUTSIDE ON MAIN SPINDLE COOLANT AND AIR THROUGH THE COUNTER SPINDLE PRECAST GRIPPERS G/L 165 MM D 65 MM, 3 KG PART ON A TRAY HANDWHEEL AND 12-DRIVEN TOOL HOLDERS 12 FIXED HOLDER SPAENEFOERDERER
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-please check the plaque for technical specifications.

if you need further information, please feel free to contact us via mail or phone. PLEASE CHECK THE PLAQUE FOR TECHNICAL SPECIFICATIONS. IF YOU NEED FURTHER INFORMATION, PLEASE FEEL FREE TO CONTACT US VIA MAIL OR PHONE.
Vendedor: Dimex Import Export
Año de construcción: usado
Ubicación: Land-30mw(max.50mw) solar module production line

make: sfa(korea)

manufacturing year: 2010

cell thickness: 180 ± 20 ?m

cell size: 156 ×156 mm ± 0.5 mm

cell: 6 inch

(equipment list)

cell sorter

stringer

lay up

eva dispenser

eva/back sheet cutter

laminator

auto trimming

semi framer

simulator

automation 


bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567    
busbar width:1.3mm  
 30MW(MAX.50MW) SOLAR MODULE PRODUCTION LINE MAKE: SFA(KOREA) MANUFACTURING YEAR: 2010 CELL THICKNESS: 180 ± 20 ?M CELL SIZE: 156 ×156 MM ± 0.5 MM CELL: 6 INCH (EQUIPMENT LIST) CELL SORTER STRINGER LAY UP EVA DISPENSER EVA/BACK SHEET CUTTER LAMINATOR AUTO TRIMMING SEMI FRAMER SIMULATOR AUTOMATION BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567 BUSBAR WIDTH:1.3MM
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: used machinery auction RESALE 42.000 €
Ubicación: Land-weight approx.: 7300 kg<br/>dimensions (l x w x h) approx.: 10540 x 4230 x 3100  mm<br/>description:  elumatec sbz 130 machining centre - machine number 13000301026,  - max. machining length without end face machining 7200 mm, - with end face machining (tool dependent) 7080 mm,  - travel distance x 7200 mm,  - adjustment speed 60 m/min,  - travel distance y 485 mm,  - adjustment speed 30 m/min,  - travel distance z 340 mm,  - adjustment speed 30 m/min, max. 15000 rpm and 5.5 kw,  - tool cone holder bt 30,  - tool changer for 8 holders,  - max. cutter diameter 25 mm,  - max. disc cutter diameter 180 mm,  - tool length (from cone size) max. 150 mm,  - air consumption with spraying approx. 100 l/min,  - with 3-axis control elucam,  - front only light barrier,  - no middle table,  - 4th axis rotation angle heads 2 pieces er 20, i = 1:1, 185, slow - running spindle i = 5:1, n 1 mx. 4500 rpm,  - 3 x collet chucks er 32 2 to 20 mm,  - 2 x quick-action chucks bt 30 l = 110 mm for drills 1 to 13 mm,  - collet chuck set for sbz 130,  - er 32 double slotted,  - 2 x cutter set pn for sbz 130 steel-stainless steel,  - 1 x length measurement for profile bar elucam complete documentation with circuit diagrams, 8 pneumatic workpiece clamping devices, safety light barrier system in front, foot mat, foot switch, machine light, tool cabinet with collets in 6 drawers, 2 precision profile vices gerardi modular vise, jaw width 150 mm, both with a set of additional v-block clamping jaws, 2 additional adapter plates for mounting on the clamping jaws. WEIGHT APPROX.: 7300 KG
DIMENSIONS (L X W X H) APPROX.: 10540 X 4230 X 3100 MM
DESCRIPTION: ELUMATEC SBZ 130 MACHINING CENTRE - MACHINE NUMBER 13000301026, - MAX. MACHINING LENGTH WITHOUT END FACE MACHINING 7200 MM, - WITH END FACE MACHINING (TOOL DEPENDENT) 7080 MM, - TRAVEL DISTANCE X 7200 MM, - ADJUSTMENT SPEED 60 M/MIN, - TRAVEL DISTANCE Y 485 MM, - ADJUSTMENT SPEED 30 M/MIN, - TRAVEL DISTANCE Z 340 MM, - ADJUSTMENT SPEED 30 M/MIN, MAX. 15000 RPM AND 5.5 KW, - TOOL CONE HOLDER BT 30, - TOOL CHANGER FOR 8 HOLDERS, - MAX. CUTTER DIAMETER 25 MM, - MAX. DISC CUTTER DIAMETER 180 MM, - TOOL LENGTH (FROM CONE SIZE) MAX. 150 MM, - AIR CONSUMPTION WITH SPRAYING APPROX. 100 L/MIN, - WITH 3-AXIS CONTROL ELUCAM, - FRONT ONLY LIGHT BARRIER, - NO MIDDLE TABLE, - 4TH AXIS ROTATION ANGLE HEADS 2 PIECES ER 20, I = 1:1, 185, SLOW - RUNNING SPINDLE I = 5:1, N 1 MX. 4500 RPM, - 3 X COLLET CHUCKS ER 32 2 TO 20 MM, - 2 X QUICK-ACTION CHUCKS BT 30 L = 110 MM FOR DRILLS 1 TO 13 MM, - COLLET CHUCK SET FOR SBZ 130, - ER 32 DOUBLE SLOTTED, - 2 X CUTTER SET PN FOR SBZ 130 STEEL-STAINLESS STEEL, - 1 X LENGTH MEASUREMENT FOR PROFILE BAR ELUCAM COMPLETE DOCUMENTATION WITH CIRCUIT DIAGRAMS, 8 PNEUMATIC WORKPIECE CLAMPING DEVICES, SAFETY LIGHT BARRIER SYSTEM IN FRONT, FOOT MAT, FOOT SWITCH, MACHINE LIGHT, TOOL CABINET WITH COLLETS IN 6 DRAWERS, 2 PRECISION PROFILE VICES GERARDI MODULAR VISE, JAW WIDTH 150 MM, BOTH WITH A SET OF ADDITIONAL V-BLOCK CLAMPING JAWS, 2 ADDITIONAL ADAPTER PLATES FOR MOUNTING ON THE CLAMPING JAWS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-30mw(max.50mw) solar module production line

make: sfa(korea)

manufacturing year: 2010

cell thickness: 180 ± 20 ?m

cell size: 156 ×156 mm ± 0.5 mm

cell: 6 inch

(equipment list)

cell sorter

stringer

lay up

eva dispenser

eva/back sheet cutter

laminator

auto trimming

semi framer

simulator

automation 


bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567    
busbar width:1.3mm  
 30MW(MAX.50MW) SOLAR MODULE PRODUCTION LINE MAKE: SFA(KOREA) MANUFACTURING YEAR: 2010 CELL THICKNESS: 180 ± 20 ?M CELL SIZE: 156 ×156 MM ± 0.5 MM CELL: 6 INCH (EQUIPMENT LIST) CELL SORTER STRINGER LAY UP EVA DISPENSER EVA/BACK SHEET CUTTER LAMINATOR AUTO TRIMMING SEMI FRAMER SIMULATOR AUTOMATION BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567 BUSBAR WIDTH:1.3MM
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 950 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-continuous heat treatment furnace for automotive parts 
(quenching and tempering furnaces) 
 
1.continuous heat treatment furnace  
make:woosung(korea) 
year:2010 
cap?:1,500kg/hr 
product:bolt, nut, forging parts, etc. 
·temo. 
  quenching:nor. 700~950? 
         max. 1,000? 
  tempering:nor. 150~600? 
         max. 700? 
quenching:60minutes(45~90minutes) 
tempering:72minutes(60~120minutes) 
·supply:380v 3phase 
  quenching furnace:440kw 
  tempering furnace:320kw 
  etc.:40kw 
·quenching flood:22,000? cold 
·cooling water: 8,000?/hr 
1)quenching furnace  body 
  steel plate:(t)4.5, 6, 9, 12mm 
  channel:125×65×6(t)mm 
  angle:65×65×6(t)mm 
  flat bar:50×5(t)mm,50×12(t)mm, 
           100×12(t)mm 
· quenching furnace heater 
  radiant tube:sus 310s  
  ?106×4(t)mm 
  1zone:140kw 
  2zone:140kw 
  3zone:80kw 
  4zone:80kw 
·  bottom,wall:brick b-5, 115(t)mm 
             brick b-1, 115(t)mm 
             slica board 25(t)mm 
             slica board 50(t)mm 
  top:ceramic fiber module 1300?  

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567 CONTINUOUS HEAT TREATMENT FURNACE FOR AUTOMOTIVE PARTS (QUENCHING AND TEMPERING FURNACES) 1.CONTINUOUS HEAT TREATMENT FURNACE MAKE:WOOSUNG(KOREA) YEAR:2010 CAP?:1,500KG/HR PRODUCT:BOLT, NUT, FORGING PARTS, ETC. ·TEMO. QUENCHING:NOR. 700~950? MAX. 1,000? TEMPERING:NOR. 150~600? MAX. 700? QUENCHING:60MINUTES(45~90MINUTES) TEMPERING:72MINUTES(60~120MINUTES) ·SUPPLY:380V 3PHASE QUENCHING FURNACE:440KW TEMPERING FURNACE:320KW ETC.:40KW ·QUENCHING FLOOD:22,000? COLD ·COOLING WATER: 8,000?/HR 1)QUENCHING FURNACE BODY STEEL PLATE:(T)4.5, 6, 9, 12MM CHANNEL:125×65×6(T)MM ANGLE:65×65×6(T)MM FLAT BAR:50×5(T)MM,50×12(T)MM, 100×12(T)MM · QUENCHING FURNACE HEATER RADIANT TUBE:SUS 310S ?106×4(T)MM 1ZONE:140KW 2ZONE:140KW 3ZONE:80KW 4ZONE:80KW · BOTTOM,WALL:BRICK B-5, 115(T)MM BRICK B-1, 115(T)MM SLICA BOARD 25(T)MM SLICA BOARD 50(T)MM TOP:CERAMIC FIBER MODULE 1300? BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 2.450 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 16 €
Ubicación: Land-we offer for sale:

1 piece mesh cap, used (very good condition)

mass approx.: width: 1.170 x depth: 790 x height: 390 mm

-trays are stackable 6 x

-on the front pockets

-very good quality, robust, high capacity, high level of stability, good stackability and with sturdy frame

-stack baskets are suitable for sale by mass-produced articles and bulk goods

â?? the modular construction principle ideally suited to fast and build a warehouse, offers ample scope for changing requirements: grow, transform and all without tools.

-suited perfectly also for storing fire wood; no falling out, even kindling or logs can be stored just fine and dry.

-due to the high wind permeability, the baskets are ideal to dry firewood
.

we offer a comprehensive range of new and used racks and accessories, we assist you with your planning.

we offer new and used pallet racks, en 15635 withstanding scrutiny according to din.

eth professional shelf since 1983. 
WE OFFER FOR SALE: 1 PIECE MESH CAP, USED (VERY GOOD CONDITION) MASS APPROX.: WIDTH: 1.170 X DEPTH: 790 X HEIGHT: 390 MM -TRAYS ARE STACKABLE 6 X -ON THE FRONT POCKETS -VERY GOOD QUALITY, ROBUST, HIGH CAPACITY, HIGH LEVEL OF STABILITY, GOOD STACKABILITY AND WITH STURDY FRAME -STACK BASKETS ARE SUITABLE FOR SALE BY MASS-PRODUCED ARTICLES AND BULK GOODS &ACIRC;?? THE MODULAR CONSTRUCTION PRINCIPLE IDEALLY SUITED TO FAST AND BUILD A WAREHOUSE, OFFERS AMPLE SCOPE FOR CHANGING REQUIREMENTS: GROW, TRANSFORM AND ALL WITHOUT TOOLS. -SUITED PERFECTLY ALSO FOR STORING FIRE WOOD; NO FALLING OUT, EVEN KINDLING OR LOGS CAN BE STORED JUST FINE AND DRY. -DUE TO THE HIGH WIND PERMEABILITY, THE BASKETS ARE IDEAL TO DRY FIREWOOD . WE OFFER A COMPREHENSIVE RANGE OF NEW AND USED RACKS AND ACCESSORIES, WE ASSIST YOU WITH YOUR PLANNING. WE OFFER NEW AND USED PALLET RACKS, EN 15635 WITHSTANDING SCRUTINY ACCORDING TO DIN. ETH PROFESSIONAL SHELF SINCE 1983.
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Precio: 75 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-esab plasma machine uxd-p 2000
the system is fully functional
ip8tx3mxe
we have performed repairs always using original spare parts.
-year of production 1999
components of the plasma system:
-machine bridge
-rails-post
-vacuum table
-plasma generator
-div. spare and wear parts
-complete documentation

there are still the program of columbus v3. 20, as well as the processing software modulib 1.16 with dongle for both programs. ESAB PLASMA MACHINE UXD-P 2000 THE SYSTEM IS FULLY FUNCTIONAL IP8TX3MXE WE HAVE PERFORMED REPAIRS ALWAYS USING ORIGINAL SPARE PARTS. -YEAR OF PRODUCTION 1999 COMPONENTS OF THE PLASMA SYSTEM: -MACHINE BRIDGE -RAILS-POST -VACUUM TABLE -PLASMA GENERATOR -DIV. SPARE AND WEAR PARTS -COMPLETE DOCUMENTATION THERE ARE STILL THE PROGRAM OF COLUMBUS V3. 20, AS WELL AS THE PROCESSING SOFTWARE MODULIB 1.16 WITH DONGLE FOR BOTH PROGRAMS.
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 180 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-brand: carrier
power: 488 kw
type: with free cooling
year of manufacture: 2006
refrigerant circuit: 2 pieces
type of refrigerant: r410a
compressors: 8 pcs. danfoss(scroll)
number of fans: 8 pcs.
hydraulic module: water pump, expansion vessel.
dimensions: 4,8 / 2,3 / 2,3 m.
weight: 4820 kg.
?ondition: this chiller is in perfect condition BRAND: CARRIER POWER: 488 KW TYPE: WITH FREE COOLING YEAR OF MANUFACTURE: 2006 REFRIGERANT CIRCUIT: 2 PIECES TYPE OF REFRIGERANT: R410A COMPRESSORS: 8 PCS. DANFOSS(SCROLL) NUMBER OF FANS: 8 PCS. HYDRAULIC MODULE: WATER PUMP, EXPANSION VESSEL. DIMENSIONS: 4,8 / 2,3 / 2,3 M. WEIGHT: 4820 KG. ?ONDITION: THIS CHILLER IS IN PERFECT CONDITION
Vendedor: Europrom Sp. z o.o.
Año de construcción: usado
Precio: 550 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-brand: climaveneta
power: 203 kw
year of manufacture: 2005
refrigerant circuit: 2 pieces.
type of refrigerant: r407c
compressors: 4 pcs. danfoss (scroll)
number of fans: 4 pcs.
hydraulic module: water pump, expansion vessel, buffer tank.
dimensions: 4,2 / 2,3 / 2,15 m.
weight: 2700 kg.
?ondition: this chiller is in perfect condition    BRAND: CLIMAVENETA POWER: 203 KW YEAR OF MANUFACTURE: 2005 REFRIGERANT CIRCUIT: 2 PIECES. TYPE OF REFRIGERANT: R407C COMPRESSORS: 4 PCS. DANFOSS (SCROLL) NUMBER OF FANS: 4 PCS. HYDRAULIC MODULE: WATER PUMP, EXPANSION VESSEL, BUFFER TANK. DIMENSIONS: 4,2 / 2,3 / 2,15 M. WEIGHT: 2700 KG. ?ONDITION: THIS CHILLER IS IN PERFECT CONDITION
Vendedor: Europrom Sp. z o.o.
Año de construcción: usado
Precio: 1.050 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-brand: mta
power: 208 kw
year of manufacture: 2008
refrigerant circuit: 2 pcs.
type of refrigerant: r407c
compressors: danfoss scroll 4 pcs.
number of fans: 6 pcs.
hydraulic module: water pump, expansion vessel, buffer tank.
dimensions: 4,6 / 2,2 / 2 m.
country: italy
weight: 2383 kg.
?ondition: this chiller is in a very good condition    BRAND: MTA POWER: 208 KW YEAR OF MANUFACTURE: 2008 REFRIGERANT CIRCUIT: 2 PCS. TYPE OF REFRIGERANT: R407C COMPRESSORS: DANFOSS SCROLL 4 PCS. NUMBER OF FANS: 6 PCS. HYDRAULIC MODULE: WATER PUMP, EXPANSION VESSEL, BUFFER TANK. DIMENSIONS: 4,6 / 2,2 / 2 M. COUNTRY: ITALY WEIGHT: 2383 KG. ?ONDITION: THIS CHILLER IS IN A VERY GOOD CONDITION
Vendedor: Europrom Sp. z o.o.
Año de construcción: usado
Precio: 70 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-gas engine generator set, jenbacher jms 312 gs-b. l

used machine - only 3200 operating hours!

gas engine type j 312 gs - version d225 for bio gas

stamford - alternator: hci 634 h - 400 v / 50 hz

scope of supply:
-complete biogas chp unit
for bio gas gas train
-jacket water + lube oil heat ã©changer
-exhaust heat exchanger
-complete engine cooling system (radiator + pump + valves)
-exhaust silencer
-alternator cirucit breaker
-synchronizing

-complete o & m manual
 GAS ENGINE GENERATOR SET, JENBACHER JMS 312 GS-B. L USED MACHINE - ONLY 3200 OPERATING HOURS! GAS ENGINE TYPE J 312 GS - VERSION D225 FOR BIO GAS STAMFORD - ALTERNATOR: HCI 634 H - 400 V / 50 HZ SCOPE OF SUPPLY: -COMPLETE BIOGAS CHP UNIT FOR BIO GAS GAS TRAIN -JACKET WATER + LUBE OIL HEAT &ATILDE;©CHANGER -EXHAUST HEAT EXCHANGER -COMPLETE ENGINE COOLING SYSTEM (RADIATOR + PUMP + VALVES) -EXHAUST SILENCER -ALTERNATOR CIRUCIT BREAKER -SYNCHRONIZING -COMPLETE O & M MANUAL
Vendedor: PowerUp GmbH
Año de construcción: usado
Ubicación: Land-module impact tool, tooth milling cutter, wälzschälen, wälzstoßen an internal toothing, profiltoßen an internal toothing, disc milling cutter, gear cutter, module cutter, zahnformfräser, module milling head<br /><br />-module impact tool 85 pieces<br />-list in the pictures<br />-different producers<br />-different diameters<br />-module size from module 0.5 to module 8<br />-will be sold completely<br />-transport box dimensions 320/500 / h200 mm<br />-weight 56.5 kg MODULE IMPACT TOOL, TOOTH MILLING CUTTER, WäLZSCHäLEN, WäLZSTOßEN AN INTERNAL TOOTHING, PROFILTOßEN AN INTERNAL TOOTHING, DISC MILLING CUTTER, GEAR CUTTER, MODULE CUTTER, ZAHNFORMFRäSER, MODULE MILLING HEAD

-MODULE IMPACT TOOL 85 PIECES
-LIST IN THE PICTURES
-DIFFERENT PRODUCERS
-DIFFERENT DIAMETERS
-MODULE SIZE FROM MODULE 0.5 TO MODULE 8
-WILL BE SOLD COMPLETELY
-TRANSPORT BOX DIMENSIONS 320/500 / H200 MM
-WEIGHT 56.5 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-cummins qsk60 natural gas generator sets 1300 kw
four (4) 1300 kw cummins qsk60 v16 natural gas engine, turbocharged, low temperature after cooled, dual frequency, 1500/1800 rpm, 400/480 volt, 50/60 hz, rated 1300 kw at 60 hz for continuous operation and 1100 kw at 50 hz for continuous operation, natural gas fuel, 

iso sound attenuated containerized power modules. features cummins advanced built in electrical protection system, extensive cooling system and advanced digital electronic control system technology. complete cummins compact power modules with many advanced features. 

the power packages can be transported anywhere in the world with quick set up to generate immediate power. power packages are being offered at an excellent price, contact us before they are gone.
  CUMMINS QSK60 NATURAL GAS GENERATOR SETS 1300 KW FOUR (4) 1300 KW CUMMINS QSK60 V16 NATURAL GAS ENGINE, TURBOCHARGED, LOW TEMPERATURE AFTER COOLED, DUAL FREQUENCY, 1500/1800 RPM, 400/480 VOLT, 50/60 HZ, RATED 1300 KW AT 60 HZ FOR CONTINUOUS OPERATION AND 1100 KW AT 50 HZ FOR CONTINUOUS OPERATION, NATURAL GAS FUEL, ISO SOUND ATTENUATED CONTAINERIZED POWER MODULES. FEATURES CUMMINS ADVANCED BUILT IN ELECTRICAL PROTECTION SYSTEM, EXTENSIVE COOLING SYSTEM AND ADVANCED DIGITAL ELECTRONIC CONTROL SYSTEM TECHNOLOGY. COMPLETE CUMMINS COMPACT POWER MODULES WITH MANY ADVANCED FEATURES. THE POWER PACKAGES CAN BE TRANSPORTED ANYWHERE IN THE WORLD WITH QUICK SET UP TO GENERATE IMMEDIATE POWER. POWER PACKAGES ARE BEING OFFERED AT AN EXCELLENT PRICE, CONTACT US BEFORE THEY ARE GONE.
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Precio: 1.850 €
Ubicación: Land-longitudinal carriage, chassis, welding chassis, longitudinal carriage, welding machine, welding carriage, inert gas welding machine, longitudinal seam welding machine, longitudinal seam welding machine, longitudinal seam welder, rail runner<br /><br />-stable, compact and modular design<br />-4-wheel drive via stepper motor<br />-wheels with polyurethane treads<br />-excellent directional stability<br />-viskosedämpfer for constant driving<br />-integrated position measuring system<br />-reinforcement frame with mounting spigot for wire feed<br />-4 pieces eyebolts<br />-power supply and plc power unit integrated in the chassis<br />-power cable with plug 12 m<br />-control line to the power source 10 m<br />-ink remote control rcu 5000i<br />-incl. hosepack LONGITUDINAL CARRIAGE, CHASSIS, WELDING CHASSIS, LONGITUDINAL CARRIAGE, WELDING MACHINE, WELDING CARRIAGE, INERT GAS WELDING MACHINE, LONGITUDINAL SEAM WELDING MACHINE, LONGITUDINAL SEAM WELDING MACHINE, LONGITUDINAL SEAM WELDER, RAIL RUNNER

-STABLE, COMPACT AND MODULAR DESIGN
-4-WHEEL DRIVE VIA STEPPER MOTOR
-WHEELS WITH POLYURETHANE TREADS
-EXCELLENT DIRECTIONAL STABILITY
-VISKOSEDäMPFER FOR CONSTANT DRIVING
-INTEGRATED POSITION MEASURING SYSTEM
-REINFORCEMENT FRAME WITH MOUNTING SPIGOT FOR WIRE FEED
-4 PIECES EYEBOLTS
-POWER SUPPLY AND PLC POWER UNIT INTEGRATED IN THE CHASSIS
-POWER CABLE WITH PLUG 12 M
-CONTROL LINE TO THE POWER SOURCE 10 M
-INK REMOTE CONTROL RCU 5000I
-INCL. HOSEPACK
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-max gear diameter: 2000 mm
max module: 25
table diameter: 1800 mm
maximum table load: 10 t
main motor power: 14 kw
overall dimensions(lxwxh): 6910 x 2990 x 3462 mm
weight of the machine: 31800 kg
 MAX GEAR DIAMETER: 2000 MM MAX MODULE: 25 TABLE DIAMETER: 1800 MM MAXIMUM TABLE LOAD: 10 T MAIN MOTOR POWER: 14 KW OVERALL DIMENSIONS(LXWXH): 6910 X 2990 X 3462 MM WEIGHT OF THE MACHINE: 31800 KG
Vendedor: Blachmix
Año de construcción: usado
Precio: 160 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-chiller water cooled 65.8 kw, mta type: ocean tech oct 230

m.t.a. s.p.a..

ocean tech oct 230 compressor evaporator units for air conditioning systems; indoor installation; without hydraulic circuit (pump, storage tank); incl. crankcase heater and phase monitoring.

with the optional tank and pump module, positioned next to the cooling system and external coolingwater-supply, the ocean tech turns into a compact system fully functional.
 
cooling capacity kw 65.8
coldwatertemp. exit / entry: 7 / 12 °c
flow rate m³/h 11.3
coolingwater-supply exit / entry: 45 / 40 °c
flow rate m³/h 16.3
refrigerant r 410a

electrical data:
voltage v 400, frequency hz 50, ph 3
maximum power consumption (kw) 27.3
max current (a) 45.2
starting current (a) 178
class of protection: ip22
	
dimensions:
length 1735 mm, width mm 660, height 1200 mm
weight kg 430
connection cold water g 2 CHILLER WATER COOLED 65.8 KW, MTA TYPE: OCEAN TECH OCT 230 M.T.A. S.P.A.. OCEAN TECH OCT 230 COMPRESSOR EVAPORATOR UNITS FOR AIR CONDITIONING SYSTEMS; INDOOR INSTALLATION; WITHOUT HYDRAULIC CIRCUIT (PUMP, STORAGE TANK); INCL. CRANKCASE HEATER AND PHASE MONITORING. WITH THE OPTIONAL TANK AND PUMP MODULE, POSITIONED NEXT TO THE COOLING SYSTEM AND EXTERNAL COOLINGWATER-SUPPLY, THE OCEAN TECH TURNS INTO A COMPACT SYSTEM FULLY FUNCTIONAL. COOLING CAPACITY KW 65.8 COLDWATERTEMP. EXIT / ENTRY: 7 / 12 °C FLOW RATE M³/H 11.3 COOLINGWATER-SUPPLY EXIT / ENTRY: 45 / 40 °C FLOW RATE M³/H 16.3 REFRIGERANT R 410A ELECTRICAL DATA: VOLTAGE V 400, FREQUENCY HZ 50, PH 3 MAXIMUM POWER CONSUMPTION (KW) 27.3 MAX CURRENT (A) 45.2 STARTING CURRENT (A) 178 CLASS OF PROTECTION: IP22 DIMENSIONS: LENGTH 1735 MM, WIDTH MM 660, HEIGHT 1200 MM WEIGHT KG 430 CONNECTION COLD WATER G 2 " CONNECTION COOLING WATER G 2" SERIAL NO.: 2200304929 YEAR 2017 CONDITION: OPTICAL 1, TECHNICALLY 1 (NEW STOCK UNIT) PRICE: ON REQUEST IN EURO (PLUS VAT FROM NETTETAL), 12 MONTHS WARRANTY USED MACHINES CAN HAVE VISUAL DEFECTS DUE TO THEIR USE. (SUBJECT TO CHANGE AND PRIOR SALE RESERVED!) LOCATION: MTA GERMANY GMBH, 41334 NETTETAL COMPRESSSOR-EVAPORATOR UNIT, WATER CHILLERS, HEAT PUMPS, CHILLER, MTA
Vendedor: MTA Deutschland GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 1600 mm<br/>y-travel: 900 mm<br/>z-travel: 800 mm<br/>control: heidenhain itnc 530 <br/>turning speeds: 14000 u/min<br/>tool taper: sk 40 <br/>tool changer: 30 x <br/>capacity of spindle: 12 kw<br/>rapid traverse: 20 m/min<br/>table surface area: 1700 x 850 mm<br/>table load: max. 2,00 t<br/>t-slots: 7 <br/>t-slot - distance: 100 mm<br/>t-slot - width: 18 mm<br/>internal cooling: 42 bar<br/>coolant tank: 600 l<br/>measuring probe: omp 40 <br/>machine on: 67.218 h<br/>spindle hour: 4.550 h<br/>total power requirement: 16 kw<br/>weight of the machine ca.: 18,60 t<br/>dimensions of the machine ca.: 3,84 x 4,23 x 3,25 m<br/>chip conveyor:  <br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> X-TRAVEL: 1600 MM
Y-TRAVEL: 900 MM
Z-TRAVEL: 800 MM
CONTROL: HEIDENHAIN ITNC 530
TURNING SPEEDS: 14000 U/MIN
TOOL TAPER: SK 40
TOOL CHANGER: 30 X
CAPACITY OF SPINDLE: 12 KW
RAPID TRAVERSE: 20 M/MIN
TABLE SURFACE AREA: 1700 X 850 MM
TABLE LOAD: MAX. 2,00 T
T-SLOTS: 7
T-SLOT - DISTANCE: 100 MM
T-SLOT - WIDTH: 18 MM
INTERNAL COOLING: 42 BAR
COOLANT TANK: 600 L
MEASURING PROBE: OMP 40
MACHINE ON: 67.218 H
SPINDLE HOUR: 4.550 H
TOTAL POWER REQUIREMENT: 16 KW
WEIGHT OF THE MACHINE CA.: 18,60 T
DIMENSIONS OF THE MACHINE CA.: 3,84 X 4,23 X 3,25 M
CHIP CONVEYOR:



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Precio: 490 €
Ubicación: Land-linear module with ball-and-roller spindle ina mkuse 25 kgt
manufacturer: ina
type: mkuse 25 kgt,
stroke: 450mm,
total length: 595mm
shaft diameter: 19mm
with a ball screw, a floating bearing and a fixed bearing.
two bellows

state:
attention, the linear module is completely new! the linear drive was purchased from a spare parts warehouse and is therefore sold as a used linear drive. LINEAR MODULE WITH BALL-AND-ROLLER SPINDLE INA MKUSE 25 KGT MANUFACTURER: INA TYPE: MKUSE 25 KGT, STROKE: 450MM, TOTAL LENGTH: 595MM SHAFT DIAMETER: 19MM WITH A BALL SCREW, A FLOATING BEARING AND A FIXED BEARING. TWO BELLOWS STATE: ATTENTION, THE LINEAR MODULE IS COMPLETELY NEW! THE LINEAR DRIVE WAS PURCHASED FROM A SPARE PARTS WAREHOUSE AND IS THEREFORE SOLD AS A USED LINEAR DRIVE.
Vendedor: IPV GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 900 mm<br/>y-travel: 680 mm<br/>z-travel: 405 mm<br/>control: pocon 60 <br/>table-size: 1200 x 850 mm<br/>dielektrikum level max. over work surface: 410 mm<br/>workpiece weight: max. 3000 kg<br/>t-slots: 6 <br/>t-slot - width: 12 mm<br/>distance spindle nose and table: 650/235 mm<br/>rapide traverse: 2000 mm/min<br/>electrode weight: 15 kg<br/>dielectric: 800 l <br/>tool changer: z+k 16 x <br/>generator on: 36.100 h<br/>dimensions of the machine ca.: 1,54 x 1,52 x 2,71 m<br/>weight of the machine ca.: 3,70 t<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> X-TRAVEL: 900 MM
Y-TRAVEL: 680 MM
Z-TRAVEL: 405 MM
CONTROL: POCON 60
TABLE-SIZE: 1200 X 850 MM
DIELEKTRIKUM LEVEL MAX. OVER WORK SURFACE: 410 MM
WORKPIECE WEIGHT: MAX. 3000 KG
T-SLOTS: 6
T-SLOT - WIDTH: 12 MM
DISTANCE SPINDLE NOSE AND TABLE: 650/235 MM
RAPIDE TRAVERSE: 2000 MM/MIN
ELECTRODE WEIGHT: 15 KG
DIELECTRIC: 800 L
TOOL CHANGER: Z+K 16 X
GENERATOR ON: 36.100 H
DIMENSIONS OF THE MACHINE CA.: 1,54 X 1,52 X 2,71 M
WEIGHT OF THE MACHINE CA.: 3,70 T



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-coater tower (chambered doctor blade system)
colorpilot
pecom
rci remote ink and register control of lateral, circumferential and diagonal register
roland-deltamatic damping with circulation and refrigeration
ink temperature control
apl highly automated plate change
automatic size adjustment
automatic ink roller wash-up device
automatic blanket  and impression wash-up device
suction feed table
modular printing units with double-diameter impression cylinders
refined plate, blanket and impression cylinder
sheet decurler
powder sprayer
ir-dryer
extended high pile delivery with airglide
serial equipment COATER TOWER (CHAMBERED DOCTOR BLADE SYSTEM) COLORPILOT PECOM RCI REMOTE INK AND REGISTER CONTROL OF LATERAL, CIRCUMFERENTIAL AND DIAGONAL REGISTER ROLAND-DELTAMATIC DAMPING WITH CIRCULATION AND REFRIGERATION INK TEMPERATURE CONTROL APL HIGHLY AUTOMATED PLATE CHANGE AUTOMATIC SIZE ADJUSTMENT AUTOMATIC INK ROLLER WASH-UP DEVICE AUTOMATIC BLANKET AND IMPRESSION WASH-UP DEVICE SUCTION FEED TABLE MODULAR PRINTING UNITS WITH DOUBLE-DIAMETER IMPRESSION CYLINDERS REFINED PLATE, BLANKET AND IMPRESSION CYLINDER SHEET DECURLER POWDER SPRAYER IR-DRYER EXTENDED HIGH PILE DELIVERY WITH AIRGLIDE SERIAL EQUIPMENT
Vendedor: Black Horse Machinery, S.L.
Año de construcción: usado
Ubicación: Land-x-travel: 1200 mm<br/>y-travel: 1000 mm<br/>z-travel: 550 mm<br/>control: siemens 840d <br/>tool taper: hsk 63-a <br/>tool changer: 20 x <br/>coolant tank: 230 l<br/>table surface area: 1400 x 1000 mm<br/>table load: 2,00 t<br/>turning speeds: 10 - 15000 u/min<br/>capacity of spindle: 10/15 kw<br/>feed: 10 - 10000 mm/min<br/>rapid traverse: 30 m/min<br/>machine on: 53.476 h<br/>weight of the machine ca.: ca. 12 t<br/>chip conveyor:  <br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> X-TRAVEL: 1200 MM
Y-TRAVEL: 1000 MM
Z-TRAVEL: 550 MM
CONTROL: SIEMENS 840D
TOOL TAPER: HSK 63-A
TOOL CHANGER: 20 X
COOLANT TANK: 230 L
TABLE SURFACE AREA: 1400 X 1000 MM
TABLE LOAD: 2,00 T
TURNING SPEEDS: 10 - 15000 U/MIN
CAPACITY OF SPINDLE: 10/15 KW
FEED: 10 - 10000 MM/MIN
RAPID TRAVERSE: 30 M/MIN
MACHINE ON: 53.476 H
WEIGHT OF THE MACHINE CA.: CA. 12 T
CHIP CONVEYOR:



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Precio: 5 €
Ubicación: Land-(57) siemens simatic s7 module 6es7 132-4bd00-0aa0 € 5 / pcs excl. vat
(58) siemens simatic s7 module 6es7 131-4bd00-0aa0 € 5 / pcs excl. vat
(59) siemens simatic s7 module 6es7 138-4ca00-0aa0 € 8 / pcs excl. vat
(60) siemens simatic s7 counter module 6es7 138-4da03-0ab0 € 41 / pcs excl. vat
(61) siemens simatic s7 module 6es7 134-4gb10-0ab0 € 66 / pcs excl. vat
(62) siemens simatic s7 module 6es7 135-4gb00-0ab0 € 33 / pcs excl. vat
(63) siemens simatik s7 terminal module tm-e15s26-a1 € 4,50 / pcs excl. vat
(64) siemens simatik s7 terminal module tm-p15s23-a0 € 4 / pcs excl. vat
(65) siemens simatic s7 interface module with connector 6es7 151-1aa02-0ab0 € 32 / pc. excl. vat
(184) siemens simatic s7 profibus dp / dp coupler 6es7 158-0ad00-0xa0 49 / pc. excl. vat

shipping costs in austria:
for orders up to € 25 net - € 18 shipping costs
for orders up to € 50 net - € 12 shipping costs
for orders up to € 100 net - € 8 shipping costs
for orders from € 100 net - no shipping costs (57) SIEMENS SIMATIC S7 MODULE 6ES7 132-4BD00-0AA0 € 5 / PCS EXCL. VAT (58) SIEMENS SIMATIC S7 MODULE 6ES7 131-4BD00-0AA0 € 5 / PCS EXCL. VAT (59) SIEMENS SIMATIC S7 MODULE 6ES7 138-4CA00-0AA0 € 8 / PCS EXCL. VAT (60) SIEMENS SIMATIC S7 COUNTER MODULE 6ES7 138-4DA03-0AB0 € 41 / PCS EXCL. VAT (61) SIEMENS SIMATIC S7 MODULE 6ES7 134-4GB10-0AB0 € 66 / PCS EXCL. VAT (62) SIEMENS SIMATIC S7 MODULE 6ES7 135-4GB00-0AB0 € 33 / PCS EXCL. VAT (63) SIEMENS SIMATIK S7 TERMINAL MODULE TM-E15S26-A1 € 4,50 / PCS EXCL. VAT (64) SIEMENS SIMATIK S7 TERMINAL MODULE TM-P15S23-A0 € 4 / PCS EXCL. VAT (65) SIEMENS SIMATIC S7 INTERFACE MODULE WITH CONNECTOR 6ES7 151-1AA02-0AB0 € 32 / PC. EXCL. VAT (184) SIEMENS SIMATIC S7 PROFIBUS DP / DP COUPLER 6ES7 158-0AD00-0XA0 49 / PC. EXCL. VAT SHIPPING COSTS IN AUSTRIA: FOR ORDERS UP TO € 25 NET - € 18 SHIPPING COSTS FOR ORDERS UP TO € 50 NET - € 12 SHIPPING COSTS FOR ORDERS UP TO € 100 NET - € 8 SHIPPING COSTS FOR ORDERS FROM € 100 NET - NO SHIPPING COSTS
Vendedor: IPV GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 840 mm<br/>turning diameter over slide rest: 530 mm<br/>turning length: 3500 mm<br/>spindle bore: 82 mm<br/>turning speeds: 7 - 900 u/min<br/>tail stock:  <br/>diameter of quill: 130 mm<br/>quill stroke: 335 mm<br/>quill cone: mk 6 <br/>tailstocks:  <br/>rapid traverse: max. 4,3 m/min<br/>weight of the machine ca.: 7,50 t<br/>dimensions of the machine ca.: 5,80 x 1,44 x 1,50 m<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> TURNING DIAMETER OVER BED: 840 MM
TURNING DIAMETER OVER SLIDE REST: 530 MM
TURNING LENGTH: 3500 MM
SPINDLE BORE: 82 MM
TURNING SPEEDS: 7 - 900 U/MIN
TAIL STOCK:
DIAMETER OF QUILL: 130 MM
QUILL STROKE: 335 MM
QUILL CONE: MK 6
TAILSTOCKS:
RAPID TRAVERSE: MAX. 4,3 M/MIN
WEIGHT OF THE MACHINE CA.: 7,50 T
DIMENSIONS OF THE MACHINE CA.: 5,80 X 1,44 X 1,50 M



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-wir verkaufen (please see information in english further down):

1 x hpe aruba 5412r-zl2 switch and modules 


mehr information auf anfrage.

wir freuen uns ueber anfragen aus deutschland und international.

wir haben viele weitere refurbished/gebrauchte hardware aus den bereichen, der hier genannten systeme sowie aus bereichen weiterer systeme dieser hersteller zur verfügung: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

wir verfügen außerdem zu jeder zeit über große mengen an systemkomponenten von: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

geprüfte, getestete gebrauchthardware günstig von hascon!


we have available over 90% of the hardware of all notable manufacturers that has been on the market for over 12 months, e.g., from: 

oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

we also have available, at any time, large numbers of components by oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

 WIR VERKAUFEN (PLEASE SEE INFORMATION IN ENGLISH FURTHER DOWN): 1 X HPE ARUBA 5412R-ZL2 SWITCH AND MODULES MEHR INFORMATION AUF ANFRAGE. WIR FREUEN UNS UEBER ANFRAGEN AUS DEUTSCHLAND UND INTERNATIONAL. WIR HABEN VIELE WEITERE REFURBISHED/GEBRAUCHTE HARDWARE AUS DEN BEREICHEN, DER HIER GENANNTEN SYSTEME SOWIE AUS BEREICHEN WEITERER SYSTEME DIESER HERSTELLER ZUR VERFüGUNG: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WIR VERFüGEN AUßERDEM ZU JEDER ZEIT üBER GROßE MENGEN AN SYSTEMKOMPONENTEN VON: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA GEPRüFTE, GETESTETE GEBRAUCHTHARDWARE GüNSTIG VON HASCON! WE HAVE AVAILABLE OVER 90% OF THE HARDWARE OF ALL NOTABLE MANUFACTURERS THAT HAS BEEN ON THE MARKET FOR OVER 12 MONTHS, E.G., FROM: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WE ALSO HAVE AVAILABLE, AT ANY TIME, LARGE NUMBERS OF COMPONENTS BY ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA
Vendedor: Hascon
Año de construcción: usado
Ubicación: Land-turning diameter: 250 mm<br/>turning height: 250 mm<br/>control: siemens 840d <br/>spindle hollow: 79 mm<br/>bar material dia.: max. 70 mm<br/>rapid traverse x-axis: 100 m/min<br/>rapid traverse z-axis: 45 m/min<br/>face stroke: x=800 mm <br/>longitudinal stroke: z=300 mm mm<br/>spindle turning speed range: 20 - 5000 u/min<br/>main drive motor: 21 kw<br/>turret: 12 fach<br/>switch-on hours: 31504 <br/>number of working hours: 11738 h<br/>coolant: 500 l <br/>weight of the machine ca.: 7,50 t<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> TURNING DIAMETER: 250 MM
TURNING HEIGHT: 250 MM
CONTROL: SIEMENS 840D
SPINDLE HOLLOW: 79 MM
BAR MATERIAL DIA.: MAX. 70 MM
RAPID TRAVERSE X-AXIS: 100 M/MIN
RAPID TRAVERSE Z-AXIS: 45 M/MIN
FACE STROKE: X=800 MM
LONGITUDINAL STROKE: Z=300 MM MM
SPINDLE TURNING SPEED RANGE: 20 - 5000 U/MIN
MAIN DRIVE MOTOR: 21 KW
TURRET: 12 FACH
SWITCH-ON HOURS: 31504
NUMBER OF WORKING HOURS: 11738 H
COOLANT: 500 L
WEIGHT OF THE MACHINE CA.: 7,50 T



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-wir verkaufen (please see information in english further down):

1.) 1 x emc vplex vs2

hardware
1x vs2-02-kit-fd; vplex vs2 small config kit
(rackable)
1x vs2-fm8gfc; chinook front end i/o option
(8gfc)
1x vs2-cm8gfc; 8 gbit fc com modules
1x vs2-eng-bs-fd; vplex vs2 base engine
(rackable)
1x vs2-server-fd; vplex vs2 management server
(rackable) 
 
software
1x vs-os-gpl3; np assy vplex; os gplv3 sw; no
charge
1x vs-os-nongpl3; np vplex; os non gplv3 sw; no
charge
1x 458-000-090; vplex geosyn product
1x 456-107-849; vplex geosynchronybase incl
10tb=ca
1x 458-001-493; vplex 1-1 ca unity frame tf
product
1x 456-111-323; vplx v2 1-1ca unity400f/450f
lic=ic


2.) 1 x emc unity 450f series systems

hardware
1x d31demcck25kitaf; unity 25 drive dpe af fld
install kit
1x d32bd32af25af; unity 450f 2u dpe 25x2.5 drive
fld rk
1x c13-pwr-7; 2 c13 pwrcords w/ cee7/7 plugs 250v
10a
25x d3f-2sfxl2-7680; unity afa 7.68tb ssd 25x2.5
1x d3sfp16faf; unity 4x16gb sfp fc connection
1x d3sl16faf; unity 2x4 port 16g fc io 
 
software
35x vsc-sia-12-pr; sel storage cloud std ia cap
unity promo
1x 458-001-842; unity 400f/450f base software+
d@re=ic 
 
recoverpoint
software
1x 458-001-375; rp basic for unity 400/400f/450f
=ic 
 
appsync
software
1x 458-001-735; appsync basic for unity 400f/450f
=ic
1x 456-111-474; appsync basic for unity 400f/450f
lic=ic 
 
vipr srm - perpetual
software
1x 458-002-287; storage m&r for unity=ic
1x 456-113-338; storage m&r for unity lic=ic


mehr information auf anfrage.

wir freuen uns ueber anfragen aus deutschland und international.

wir haben viele weitere refurbished/gebrauchte hardware aus den bereichen, der hier genannten systeme sowie aus bereichen weiterer systeme dieser hersteller zur verfügung: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

wir verfügen außerdem zu jeder zeit über große mengen an systemkomponenten von: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

geprüfte, getestete gebrauchthardware günstig von hascon!


we have available over 90% of the hardware of all notable manufacturers that has been on the market for over 12 months, e.g., from: 

oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

we also have available, at any time, large numbers of components by oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya


 WIR VERKAUFEN (PLEASE SEE INFORMATION IN ENGLISH FURTHER DOWN): 1.) 1 X EMC VPLEX VS2 HARDWARE 1X VS2-02-KIT-FD; VPLEX VS2 SMALL CONFIG KIT (RACKABLE) 1X VS2-FM8GFC; CHINOOK FRONT END I/O OPTION (8GFC) 1X VS2-CM8GFC; 8 GBIT FC COM MODULES 1X VS2-ENG-BS-FD; VPLEX VS2 BASE ENGINE (RACKABLE) 1X VS2-SERVER-FD; VPLEX VS2 MANAGEMENT SERVER (RACKABLE) SOFTWARE 1X VS-OS-GPL3; NP ASSY VPLEX; OS GPLV3 SW; NO CHARGE 1X VS-OS-NONGPL3; NP VPLEX; OS NON GPLV3 SW; NO CHARGE 1X 458-000-090; VPLEX GEOSYN PRODUCT 1X 456-107-849; VPLEX GEOSYNCHRONYBASE INCL 10TB=CA 1X 458-001-493; VPLEX 1-1 CA UNITY FRAME TF PRODUCT 1X 456-111-323; VPLX V2 1-1CA UNITY400F/450F LIC=IC 2.) 1 X EMC UNITY 450F SERIES SYSTEMS HARDWARE 1X D31DEMCCK25KITAF; UNITY 25 DRIVE DPE AF FLD INSTALL KIT 1X D32BD32AF25AF; UNITY 450F 2U DPE 25X2.5 DRIVE FLD RK 1X C13-PWR-7; 2 C13 PWRCORDS W/ CEE7/7 PLUGS 250V 10A 25X D3F-2SFXL2-7680; UNITY AFA 7.68TB SSD 25X2.5 1X D3SFP16FAF; UNITY 4X16GB SFP FC CONNECTION 1X D3SL16FAF; UNITY 2X4 PORT 16G FC IO SOFTWARE 35X VSC-SIA-12-PR; SEL STORAGE CLOUD STD IA CAP UNITY PROMO 1X 458-001-842; UNITY 400F/450F BASE SOFTWARE+ D@RE=IC RECOVERPOINT SOFTWARE 1X 458-001-375; RP BASIC FOR UNITY 400/400F/450F =IC APPSYNC SOFTWARE 1X 458-001-735; APPSYNC BASIC FOR UNITY 400F/450F =IC 1X 456-111-474; APPSYNC BASIC FOR UNITY 400F/450F LIC=IC VIPR SRM - PERPETUAL SOFTWARE 1X 458-002-287; STORAGE M&R FOR UNITY=IC 1X 456-113-338; STORAGE M&R FOR UNITY LIC=IC MEHR INFORMATION AUF ANFRAGE. WIR FREUEN UNS UEBER ANFRAGEN AUS DEUTSCHLAND UND INTERNATIONAL. WIR HABEN VIELE WEITERE REFURBISHED/GEBRAUCHTE HARDWARE AUS DEN BEREICHEN, DER HIER GENANNTEN SYSTEME SOWIE AUS BEREICHEN WEITERER SYSTEME DIESER HERSTELLER ZUR VERFüGUNG: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WIR VERFüGEN AUßERDEM ZU JEDER ZEIT üBER GROßE MENGEN AN SYSTEMKOMPONENTEN VON: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA GEPRüFTE, GETESTETE GEBRAUCHTHARDWARE GüNSTIG VON HASCON! WE HAVE AVAILABLE OVER 90% OF THE HARDWARE OF ALL NOTABLE MANUFACTURERS THAT HAS BEEN ON THE MARKET FOR OVER 12 MONTHS, E.G., FROM: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WE ALSO HAVE AVAILABLE, AT ANY TIME, LARGE NUMBERS OF COMPONENTS BY ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA
Vendedor: Hascon
Año de construcción: usado
Ubicación: Land-max. width of grinding wheel: 104 mm<br/>max. dia. of grinding wheel: 400 mm<br/>max. module: 9 <br/>total power requirement: 5 kw<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> MAX. WIDTH OF GRINDING WHEEL: 104 MM
MAX. DIA. OF GRINDING WHEEL: 400 MM
MAX. MODULE: 9
TOTAL POWER REQUIREMENT: 5 KW



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-wir verkaufen (please see information in english further down):

2 x s8800 acm server mbt with redundant power supply
2 x 80 channels dsp daughterboard
5 x s8300c server
7 x g450 mp80 with redundant power supply
4 x g430 media gateway
10 x mm711 anlg media
4 x mm720 bri media module rhs
7 x mm710b e1/t1 media
ca 70 x ip phone 9620c charcoal gry
ca 500 x ip phone 9640g gry
ca 30 x 9600 sbm24 button mod gry


mehr information auf anfrage.

wir freuen uns ueber anfragen aus deutschland und international.

wir haben viele weitere refurbished/gebrauchte hardware aus den bereichen, der hier genannten systeme sowie aus bereichen weiterer systeme dieser hersteller zur verfügung: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

wir verfügen außerdem zu jeder zeit über große mengen an systemkomponenten von: oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

geprüfte, getestete gebrauchthardware günstig von hascon!


we have available over 90% of the hardware of all notable manufacturers that has been on the market for over 12 months, e.g., from: 

oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya

we also have available, at any time, large numbers of components by oracle, sun, ibm, netapp, quantum,  dell, stk, hpe, fujitsu, sgi,  hds, emc, supermicro, bull, nec, cray, 3com, adva, alcatel, brocade, cisco,cabletron, enterasys, extreme networks,huawei, marconi, nortel, qlogic, avaya
 WIR VERKAUFEN (PLEASE SEE INFORMATION IN ENGLISH FURTHER DOWN): 2 X S8800 ACM SERVER MBT WITH REDUNDANT POWER SUPPLY 2 X 80 CHANNELS DSP DAUGHTERBOARD 5 X S8300C SERVER 7 X G450 MP80 WITH REDUNDANT POWER SUPPLY 4 X G430 MEDIA GATEWAY 10 X MM711 ANLG MEDIA 4 X MM720 BRI MEDIA MODULE RHS 7 X MM710B E1/T1 MEDIA CA 70 X IP PHONE 9620C CHARCOAL GRY CA 500 X IP PHONE 9640G GRY CA 30 X 9600 SBM24 BUTTON MOD GRY MEHR INFORMATION AUF ANFRAGE. WIR FREUEN UNS UEBER ANFRAGEN AUS DEUTSCHLAND UND INTERNATIONAL. WIR HABEN VIELE WEITERE REFURBISHED/GEBRAUCHTE HARDWARE AUS DEN BEREICHEN, DER HIER GENANNTEN SYSTEME SOWIE AUS BEREICHEN WEITERER SYSTEME DIESER HERSTELLER ZUR VERFüGUNG: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WIR VERFüGEN AUßERDEM ZU JEDER ZEIT üBER GROßE MENGEN AN SYSTEMKOMPONENTEN VON: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA GEPRüFTE, GETESTETE GEBRAUCHTHARDWARE GüNSTIG VON HASCON! WE HAVE AVAILABLE OVER 90% OF THE HARDWARE OF ALL NOTABLE MANUFACTURERS THAT HAS BEEN ON THE MARKET FOR OVER 12 MONTHS, E.G., FROM: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA WE ALSO HAVE AVAILABLE, AT ANY TIME, LARGE NUMBERS OF COMPONENTS BY ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, SUPERMICRO, BULL, NEC, CRAY, 3COM, ADVA, ALCATEL, BROCADE, CISCO,CABLETRON, ENTERASYS, EXTREME NETWORKS,HUAWEI, MARCONI, NORTEL, QLOGIC, AVAYA
Vendedor: Hascon
Año de construcción: usado
Ubicación: Land-turning diameter: 460 mm<br/>turning length: 900 mm<br/>control: fanuc 18 itb <br/>turning speeds: 4000 u/min<br/>chucking diameter: 210/250 mm<br/>output mainspindle: 30 kw<br/>bar passage: 52/77 mm<br/>c-axis:  <br/>hollow clamping cylinder:  <br/>3-jaw chuck: smw 210 <br/>3-jaw chuck: smw 250 <br/>tool turret: 12 fach<br/>tool taper: vdi 50 <br/>work piece power: 7,00 kw<br/>x-axis: 360 mm<br/>z-axis: 980 mm<br/>y-axis: -55 / +65 mm<br/>measuring probe: renishaw <br/>chip conveyor:  <br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> TURNING DIAMETER: 460 MM
TURNING LENGTH: 900 MM
CONTROL: FANUC 18 ITB
TURNING SPEEDS: 4000 U/MIN
CHUCKING DIAMETER: 210/250 MM
OUTPUT MAINSPINDLE: 30 KW
BAR PASSAGE: 52/77 MM
C-AXIS:
HOLLOW CLAMPING CYLINDER:
3-JAW CHUCK: SMW 210
3-JAW CHUCK: SMW 250
TOOL TURRET: 12 FACH
TOOL TAPER: VDI 50
WORK PIECE POWER: 7,00 KW
X-AXIS: 360 MM
Z-AXIS: 980 MM
Y-AXIS: -55 / +65 MM
MEASURING PROBE: RENISHAW
CHIP CONVEYOR:



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-2016 new spindle module yaskawa	
2018 new spindle motor	
power on time: 23852 h	
total operation time: 15675 h	
control system:	
brother cnc b00	
travel distances:	
x: 550 mm	
y: 400 mm	
z: 415 mm	
table surface: 550 x 400 mm	
table load: 200 kg	
speed range: 12000 rpm	
feed rate:	
(x.y.z) 7000 mm / min	
tool diameter: 55 mm	
tool length: 200 mm	
tool weight: 55 kg	
spindle motor: 6 kw	
tool changer positions: 40	
machine dimensions (lxwxh):	
1900 x 3950 x 2500 mm	
machine weight: 4600 kg	
servis by brother 1x in 6 months	
accessories:	
extraction system: wemac	
chip conveyor	
internal cooling	
workpiece probe	
tool probe renishaw	
80 tool holders hsk 40	
availability: 01.07.2019  2016 NEW SPINDLE MODULE YASKAWA 2018 NEW SPINDLE MOTOR POWER ON TIME: 23852 H TOTAL OPERATION TIME: 15675 H CONTROL SYSTEM: BROTHER CNC B00 TRAVEL DISTANCES: X: 550 MM Y: 400 MM Z: 415 MM TABLE SURFACE: 550 X 400 MM TABLE LOAD: 200 KG SPEED RANGE: 12000 RPM FEED RATE: (X.Y.Z) 7000 MM / MIN TOOL DIAMETER: 55 MM TOOL LENGTH: 200 MM TOOL WEIGHT: 55 KG SPINDLE MOTOR: 6 KW TOOL CHANGER POSITIONS: 40 MACHINE DIMENSIONS (LXWXH): 1900 X 3950 X 2500 MM MACHINE WEIGHT: 4600 KG SERVIS BY BROTHER 1X IN 6 MONTHS ACCESSORIES: EXTRACTION SYSTEM: WEMAC CHIP CONVEYOR INTERNAL COOLING WORKPIECE PROBE TOOL PROBE RENISHAW 80 TOOL HOLDERS HSK 40 AVAILABILITY: 01.07.2019
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-pressure: 50 t<br/>chamfer lenght: 2500 mm<br/>control: dnc 7000 <br/>control defective!<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> PRESSURE: 50 T
CHAMFER LENGHT: 2500 MM
CONTROL: DNC 7000
CONTROL DEFECTIVE!



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-l + z lathe hamlet can -.
04-03-238
shipping time: immediately

number: 04-03-238

manufacturer: weiler
type: can

machine data
year built: approx 1980
l x w x h: approx. 2700 x 1200 x 1800 mm
weight: 1500 kg

good general condition

technical data
digital display: 3 - axes - digital display (new)

dimensions:
maximum turning diameter over bed: approx. ã? 380 mm

maximum turning diameter over support: approx. ã? 190 mm

maximum turning length: approx. 1000 mm

bar passage: approx. ã? 56 mm

spindle:
speed range: approx. 25-2000 rpm

spindle nose: a 2 - 6

power: approx. 4,0 kw

automatic longitudinal & plan vorschuebe:
feed range: approx. 0.013 1,253 mm / rev

suitable for threads: - metric 0.35-12 mm

"- inch 44-2 gg /"

-diametral - pitch threaded 88-5 dp

-module 0.2-4

tailstock: mk 4

accessories
â?¢ 3 - bake - chuck ã? 200 mm (forkardt - wedge bar)

â?¢ quick change toolpost + 3 inserts

â?¢ bed fence

â?¢ complete machine documentation

â?¢ various wrenches

â?¢ machine feet

â?¢ coolant system

â?¢ electric chuck guard

other accessories on request
price and other specifications on request L + Z LATHE HAMLET CAN -. 04-03-238 SHIPPING TIME: IMMEDIATELY NUMBER: 04-03-238 MANUFACTURER: WEILER TYPE: CAN MACHINE DATA YEAR BUILT: APPROX 1980 L X W X H: APPROX. 2700 X 1200 X 1800 MM WEIGHT: 1500 KG GOOD GENERAL CONDITION TECHNICAL DATA DIGITAL DISPLAY: 3 - AXES - DIGITAL DISPLAY (NEW) DIMENSIONS: MAXIMUM TURNING DIAMETER OVER BED: APPROX. &ATILDE;? 380 MM MAXIMUM TURNING DIAMETER OVER SUPPORT: APPROX. &ATILDE;? 190 MM MAXIMUM TURNING LENGTH: APPROX. 1000 MM BAR PASSAGE: APPROX. &ATILDE;? 56 MM SPINDLE: SPEED RANGE: APPROX. 25-2000 RPM SPINDLE NOSE: A 2 - 6 POWER: APPROX. 4,0 KW AUTOMATIC LONGITUDINAL & PLAN VORSCHUEBE: FEED RANGE: APPROX. 0.013 1,253 MM / REV SUITABLE FOR THREADS: - METRIC 0.35-12 MM "- INCH 44-2 GG /" -DIAMETRAL - PITCH THREADED 88-5 DP -MODULE 0.2-4 TAILSTOCK: MK 4 ACCESSORIES &ACIRC;?&CENT; 3 - BAKE - CHUCK &ATILDE;? 200 MM (FORKARDT - WEDGE BAR) &ACIRC;?&CENT; QUICK CHANGE TOOLPOST + 3 INSERTS &ACIRC;?&CENT; BED FENCE &ACIRC;?&CENT; COMPLETE MACHINE DOCUMENTATION &ACIRC;?&CENT; VARIOUS WRENCHES &ACIRC;?&CENT; MACHINE FEET &ACIRC;?&CENT; COOLANT SYSTEM &ACIRC;?&CENT; ELECTRIC CHUCK GUARD OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-saw blade diameter: 350 mm<br/>total power requirement: 1,9 kw<br/>weight of the machine ca.: 0,33 t<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> SAW BLADE DIAMETER: 350 MM
TOTAL POWER REQUIREMENT: 1,9 KW
WEIGHT OF THE MACHINE CA.: 0,33 T



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-l + z lathe hamlet can
b 04-03-237
shipping time: immediately

number: 04-03-237

manufacturer: weiler
type: can b

machine data
year of construction: approx. 1987
l x w x h: approx. 2500 x 1200 x 1800 mm
weight: 1500 kg

very good condition - from state educational institution

technical data
digital display: 2 - axes - digital display heidenhain (sino)

dimensions:
maximum turning diameter over bed: approx. ã? 380 mm

maximum turning diameter over support: approx. ã? 190 mm

maximum turning length: approx. 1000 mm

bar passage: approx. ã? 56 mm

spindle:
speed range: approx. 25-2000 rpm

spindle nose: a 2 - 6

power: approx. 4,0 kw

automatic longitudinal & plan vorschuebe:
feed range: approx. 0.011 - 0.80 mm / rev

suitable for threads: - metric 0.30 mm-10 mm

"- 80-2 3/4 inch gg /"

-diametral - pitch thread 80-5.5 dp

-module 0.2-5

tailstock: mk 4

accessories
â?¢ 3 - bake - chuck ã? 200 mm

â?¢ quick change toolpost + 3 inserts

â?¢ coolant system

â?¢ complete machine documentation

â?¢ emergency

â?¢ drill chuck for tailstock

tip â?¢ ongoing with for tailstock

â?¢ various wrenches

â?¢ bed fence

â?¢ revolver bed fence

â?¢ chuck guard

other accessories on request
price and other specifications on request L + Z LATHE HAMLET CAN B 04-03-237 SHIPPING TIME: IMMEDIATELY NUMBER: 04-03-237 MANUFACTURER: WEILER TYPE: CAN B MACHINE DATA YEAR OF CONSTRUCTION: APPROX. 1987 L X W X H: APPROX. 2500 X 1200 X 1800 MM WEIGHT: 1500 KG VERY GOOD CONDITION - FROM STATE EDUCATIONAL INSTITUTION TECHNICAL DATA DIGITAL DISPLAY: 2 - AXES - DIGITAL DISPLAY HEIDENHAIN (SINO) DIMENSIONS: MAXIMUM TURNING DIAMETER OVER BED: APPROX. &ATILDE;? 380 MM MAXIMUM TURNING DIAMETER OVER SUPPORT: APPROX. &ATILDE;? 190 MM MAXIMUM TURNING LENGTH: APPROX. 1000 MM BAR PASSAGE: APPROX. &ATILDE;? 56 MM SPINDLE: SPEED RANGE: APPROX. 25-2000 RPM SPINDLE NOSE: A 2 - 6 POWER: APPROX. 4,0 KW AUTOMATIC LONGITUDINAL & PLAN VORSCHUEBE: FEED RANGE: APPROX. 0.011 - 0.80 MM / REV SUITABLE FOR THREADS: - METRIC 0.30 MM-10 MM "- 80-2 3/4 INCH GG /" -DIAMETRAL - PITCH THREAD 80-5.5 DP -MODULE 0.2-5 TAILSTOCK: MK 4 ACCESSORIES &ACIRC;?&CENT; 3 - BAKE - CHUCK &ATILDE;? 200 MM &ACIRC;?&CENT; QUICK CHANGE TOOLPOST + 3 INSERTS &ACIRC;?&CENT; COOLANT SYSTEM &ACIRC;?&CENT; COMPLETE MACHINE DOCUMENTATION &ACIRC;?&CENT; EMERGENCY &ACIRC;?&CENT; DRILL CHUCK FOR TAILSTOCK TIP &ACIRC;?&CENT; ONGOING WITH FOR TAILSTOCK &ACIRC;?&CENT; VARIOUS WRENCHES &ACIRC;?&CENT; BED FENCE &ACIRC;?&CENT; REVOLVER BED FENCE &ACIRC;?&CENT; CHUCK GUARD OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-x-travel: 1300 mm<br/>y-travel: 1000 mm<br/>z-travel: 860 mm<br/>control: fanuc 11 mf <br/>tool taper: sk 50 <br/>tool changer: 60 x <br/>size of pallet: 1000 x 1000 mm<br/>numbers of pallets: 2 <br/>turning speeds: 10 - 4000 u/min<br/>capacity of spindle: 18,5/22 kw<br/>feed: 0,1 - 4000 mm/min<br/>rapid traverse: 12 m/min<br/>workpiece length: 470 mm<br/>diameter of tools max.: 125 mm<br/>weight of tools max.: 30 kg<br/>bearing diameter: 110 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 22,00 t<br/>dimensions of the machine ca.: 5,10 x 4,50 x 3,90 m<br/>chip conveyor:  <br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> X-TRAVEL: 1300 MM
Y-TRAVEL: 1000 MM
Z-TRAVEL: 860 MM
CONTROL: FANUC 11 MF
TOOL TAPER: SK 50
TOOL CHANGER: 60 X
SIZE OF PALLET: 1000 X 1000 MM
NUMBERS OF PALLETS: 2
TURNING SPEEDS: 10 - 4000 U/MIN
CAPACITY OF SPINDLE: 18,5/22 KW
FEED: 0,1 - 4000 MM/MIN
RAPID TRAVERSE: 12 M/MIN
WORKPIECE LENGTH: 470 MM
DIAMETER OF TOOLS MAX.: 125 MM
WEIGHT OF TOOLS MAX.: 30 KG
BEARING DIAMETER: 110 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 22,00 T
DIMENSIONS OF THE MACHINE CA.: 5,10 X 4,50 X 3,90 M
CHIP CONVEYOR:



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-l + z lathe hamlet can -.
04-03-236
shipping time: immediately

number: 04-03-236

manufacturer: weiler
type: can

machine data
year built: approx 1980
l x w x h: approx. 2700 x 1200 x 1800 mm
weight: 1500 kg

very good allgeminzustand - education of state educational institution

technical data
digital display: 2 - axes - digital display (sino)

dimensions:
maximum turning diameter over bed: approx. ã? 380 mm

maximum turning diameter over support: approx. ã? 190 mm

maximum turning length: approx. 1000 mm

bar passage: approx. ã? 56 mm

spindle:
speed range: approx. 25-2000 rpm

spindle nose: a 2 - 6

power: approx. 4,0 kw

automatic longitudinal & plan vorschuebe:
feed range: approx. 0.013 1,253 mm / rev

suitable for threads: - metric 0.35-12 mm

"- inch 44-2 gg /"

-diametral - pitch threaded 88-5 dp

-module 0.2-4

tailstock: mk 4

accessories
â?¢ 3 - bake - chuck ã? 200 mm rã¶hm

â?¢ quick change toolpost + 3 inserts

â?¢ revolver bed fence

â?¢ complete machine documentation

â?¢ various wrenches

â?¢ machine feet

â?¢ coolant system

other accessories on request
price and other specifications on request L + Z LATHE HAMLET CAN -. 04-03-236 SHIPPING TIME: IMMEDIATELY NUMBER: 04-03-236 MANUFACTURER: WEILER TYPE: CAN MACHINE DATA YEAR BUILT: APPROX 1980 L X W X H: APPROX. 2700 X 1200 X 1800 MM WEIGHT: 1500 KG VERY GOOD ALLGEMINZUSTAND - EDUCATION OF STATE EDUCATIONAL INSTITUTION TECHNICAL DATA DIGITAL DISPLAY: 2 - AXES - DIGITAL DISPLAY (SINO) DIMENSIONS: MAXIMUM TURNING DIAMETER OVER BED: APPROX. &ATILDE;? 380 MM MAXIMUM TURNING DIAMETER OVER SUPPORT: APPROX. &ATILDE;? 190 MM MAXIMUM TURNING LENGTH: APPROX. 1000 MM BAR PASSAGE: APPROX. &ATILDE;? 56 MM SPINDLE: SPEED RANGE: APPROX. 25-2000 RPM SPINDLE NOSE: A 2 - 6 POWER: APPROX. 4,0 KW AUTOMATIC LONGITUDINAL & PLAN VORSCHUEBE: FEED RANGE: APPROX. 0.013 1,253 MM / REV SUITABLE FOR THREADS: - METRIC 0.35-12 MM "- INCH 44-2 GG /" -DIAMETRAL - PITCH THREADED 88-5 DP -MODULE 0.2-4 TAILSTOCK: MK 4 ACCESSORIES &ACIRC;?&CENT; 3 - BAKE - CHUCK &ATILDE;? 200 MM R&ATILDE;&PARA;HM &ACIRC;?&CENT; QUICK CHANGE TOOLPOST + 3 INSERTS &ACIRC;?&CENT; REVOLVER BED FENCE &ACIRC;?&CENT; COMPLETE MACHINE DOCUMENTATION &ACIRC;?&CENT; VARIOUS WRENCHES &ACIRC;?&CENT; MACHINE FEET &ACIRC;?&CENT; COOLANT SYSTEM OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-x-travel: 1600 mm<br/>y-travel: 900 mm<br/>z-travel: 800 mm<br/>control: heidenhain itnc 530 <br/>turning speeds: 14000 u/min<br/>tool taper: sk 40 <br/>tool changer: 30 x <br/>capacity of spindle: 12 kw<br/>rapid traverse: 20 m/min<br/>table surface area: 1700 x 850 mm<br/>table load: 2,00 t<br/>t-slots: 7 <br/>t-slot - distance: 100 mm<br/>t-slot - width: 18 mm<br/>internal cooling: 42 bar<br/>coolant tank: 600 l<br/>measuring probe: omp 40 <br/>spindle hour: 1.435 h<br/>machine on: 27.305 h<br/>total power requirement: 16 kw<br/>weight of the machine ca.: 18,60 t<br/>dimensions of the machine ca.: 3,84 x 4,23 x 3,25 m<br/>chip conveyor:  <br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> X-TRAVEL: 1600 MM
Y-TRAVEL: 900 MM
Z-TRAVEL: 800 MM
CONTROL: HEIDENHAIN ITNC 530
TURNING SPEEDS: 14000 U/MIN
TOOL TAPER: SK 40
TOOL CHANGER: 30 X
CAPACITY OF SPINDLE: 12 KW
RAPID TRAVERSE: 20 M/MIN
TABLE SURFACE AREA: 1700 X 850 MM
TABLE LOAD: 2,00 T
T-SLOTS: 7
T-SLOT - DISTANCE: 100 MM
T-SLOT - WIDTH: 18 MM
INTERNAL COOLING: 42 BAR
COOLANT TANK: 600 L
MEASURING PROBE: OMP 40
SPINDLE HOUR: 1.435 H
MACHINE ON: 27.305 H
TOTAL POWER REQUIREMENT: 16 KW
WEIGHT OF THE MACHINE CA.: 18,60 T
DIMENSIONS OF THE MACHINE CA.: 3,84 X 4,23 X 3,25 M
CHIP CONVEYOR:



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MODUL types: