24 ofertas

Año de construcción: usado
Ubicación: Land-nc cycle lathe, built 1998, contour knob, control system k, constant cutting speed.
umlaufdurchm. 550/500 mm
top width 1000 mm
material flow 70 mm
speed range approx. 2-3500 rpm.
quill stroke and cone 160 mm / mk 5
15/11 kw
weight approx. 3 t
accessories: guard travelling with, fixed bezel, chip conveyor, ready-steel holder with various inserts size 3, electric brakes, manual chuck schunk rota-s diameter. 200 mm. NC CYCLE LATHE, BUILT 1998, CONTOUR KNOB, CONTROL SYSTEM K, CONSTANT CUTTING SPEED. UMLAUFDURCHM. 550/500 MM TOP WIDTH 1000 MM MATERIAL FLOW 70 MM SPEED RANGE APPROX. 2-3500 RPM. QUILL STROKE AND CONE 160 MM / MK 5 15/11 KW WEIGHT APPROX. 3 T ACCESSORIES: GUARD TRAVELLING WITH, FIXED BEZEL, CHIP CONVEYOR, READY-STEEL HOLDER WITH VARIOUS INSERTS SIZE 3, ELECTRIC BRAKES, MANUAL CHUCK SCHUNK ROTA-S DIAMETER. 200 MM.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 26.900 €
Ubicación: Land-weight approx.: 8200 kg<br/>dimensions (l x w x h) approx.: 7700 x 2300 x 2000 mm<br/>description: - distance between centres: 3950 mm<br> -max. swing diameter: 830 mm<br> - swing diameter over cross slide: 540 mm<br> - travel of cross slide: 450 mm<br> - spindle head (din 55027): size 11<br> - spindle diameter at front bearing: 180 mm<br> - material passages (max.): 130 mm<br> - collet chuck diameter (standard): 315/400 mm<br> - speed range: 2 - 1600 rpm<br> <br> tailstock:<br> - external diameter of quill: 125 mm<br> - quill stroke (max.): 200 mm<br> - internal taper: mk 6<br> <br> - order number: 08122971<br> - serial no.: 469/02<br> - with siemens control system<br> - machine is equipped with a forkardt three-jaw chuck, one tailstock as well as a chip conveyor mayfran, serial no.: p01 01m6864 01<br> - included in delivery is a big lot of machine accessories. consisting of: four steady rests, seven multifix holders, as well as further lathe accessories<br> - with complete documentation as well as operating instructions<br> - read off operating hours approx.: 6540<br> - important note: the company hdc huttelmayer conducted a retrofit in april 2014.<br> - the machine has to be picked up on 13th or 14th of may 2019<br> - see video as well as pdf WEIGHT APPROX.: 8200 KG
DIMENSIONS (L X W X H) APPROX.: 7700 X 2300 X 2000 MM
DESCRIPTION: - DISTANCE BETWEEN CENTRES: 3950 MM
-MAX. SWING DIAMETER: 830 MM
- SWING DIAMETER OVER CROSS SLIDE: 540 MM
- TRAVEL OF CROSS SLIDE: 450 MM
- SPINDLE HEAD (DIN 55027): SIZE 11
- SPINDLE DIAMETER AT FRONT BEARING: 180 MM
- MATERIAL PASSAGES (MAX.): 130 MM
- COLLET CHUCK DIAMETER (STANDARD): 315/400 MM
- SPEED RANGE: 2 - 1600 RPM

TAILSTOCK:
- EXTERNAL DIAMETER OF QUILL: 125 MM
- QUILL STROKE (MAX.): 200 MM
- INTERNAL TAPER: MK 6

- ORDER NUMBER: 08122971
- SERIAL NO.: 469/02
- WITH SIEMENS CONTROL SYSTEM
- MACHINE IS EQUIPPED WITH A FORKARDT THREE-JAW CHUCK, ONE TAILSTOCK AS WELL AS A CHIP CONVEYOR MAYFRAN, SERIAL NO.: P01 01M6864 01
- INCLUDED IN DELIVERY IS A BIG LOT OF MACHINE ACCESSORIES. CONSISTING OF: FOUR STEADY RESTS, SEVEN MULTIFIX HOLDERS, AS WELL AS FURTHER LATHE ACCESSORIES
- WITH COMPLETE DOCUMENTATION AS WELL AS OPERATING INSTRUCTIONS
- READ OFF OPERATING HOURS APPROX.: 6540
- IMPORTANT NOTE: THE COMPANY HDC HUTTELMAYER CONDUCTED A RETROFIT IN APRIL 2014.
- THE MACHINE HAS TO BE PICKED UP ON 13TH OR 14TH OF MAY 2019
- SEE VIDEO AS WELL AS PDF
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-center distance: 1500mm, swing over bed/ slide: 500/ 290mm, bed width: 360mm, spindle diameter: 100mm, quill diameter: 80mm, quill stroke: 160mm, length: 3330mm, width: 1550mm, height: 1790mm, weight: 3.3t.  CENTER DISTANCE: 1500MM, SWING OVER BED/ SLIDE: 500/ 290MM, BED WIDTH: 360MM, SPINDLE DIAMETER: 100MM, QUILL DIAMETER: 80MM, QUILL STROKE: 160MM, LENGTH: 3330MM, WIDTH: 1550MM, HEIGHT: 1790MM, WEIGHT: 3.3T.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 10 kg<br/>dimensions (l x w x h) approx.: 330 x 200 x 170 mm<br/>description: - 1002x2002c0006-c16 WEIGHT APPROX.: 10 KG
DIMENSIONS (L X W X H) APPROX.: 330 X 200 X 170 MM
DESCRIPTION: - 1002X2002C0006-C16
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: monforts
model: dnc 500 dt
year of manufacture: 2007
control: siemens 840 d - powerline
chuck diameter [mm]: 260 spindle:
technology: spindle with direct drive each work room
speed: 4,000 rpm
: kw 33.6
torque: 508 nm
clamping device: 3 - jaw chuck, type rota nco 260

tool carrier (x/z):
technology: star revolver with 12 stations per work area
tool holder: vdi40
driven tools: 4,000 rpm, 12,6 kw, 36 nm
left work space: additional y-axis

general:
travel in x/z: 260/600 mm
rapid traverse in x/z: 20/20 m / min automation:
technology: round clock stack magazine with gantry loader
rundtaktstapelmagain: 14 stations for raw and finished parts ã¸32 200 mm
pile weight (max.): 30 kg
bela de weight (max.): 600 kg

equipment / accessories:
chip management: slat conveyors
refrigerant management: internal cooling system with paper band filter
tool breakage monitoring: artis, type ctm
oil and emulsion mist extraction: mechanical separator, fabr. w + w MANUFACTURER: MONFORTS MODEL: DNC 500 DT YEAR OF MANUFACTURE: 2007 CONTROL: SIEMENS 840 D - POWERLINE CHUCK DIAMETER [MM]: 260 SPINDLE: TECHNOLOGY: SPINDLE WITH DIRECT DRIVE EACH WORK ROOM SPEED: 4,000 RPM : KW 33.6 TORQUE: 508 NM CLAMPING DEVICE: 3 - JAW CHUCK, TYPE ROTA NCO 260 TOOL CARRIER (X/Z): TECHNOLOGY: STAR REVOLVER WITH 12 STATIONS PER WORK AREA TOOL HOLDER: VDI40 DRIVEN TOOLS: 4,000 RPM, 12,6 KW, 36 NM LEFT WORK SPACE: ADDITIONAL Y-AXIS GENERAL: TRAVEL IN X/Z: 260/600 MM RAPID TRAVERSE IN X/Z: 20/20 M / MIN AUTOMATION: TECHNOLOGY: ROUND CLOCK STACK MAGAZINE WITH GANTRY LOADER RUNDTAKTSTAPELMAGAIN: 14 STATIONS FOR RAW AND FINISHED PARTS &ATILDE;&CEDIL;32 200 MM PILE WEIGHT (MAX.): 30 KG BELA DE WEIGHT (MAX.): 600 KG EQUIPMENT / ACCESSORIES: CHIP MANAGEMENT: SLAT CONVEYORS REFRIGERANT MANAGEMENT: INTERNAL COOLING SYSTEM WITH PAPER BAND FILTER TOOL BREAKAGE MONITORING: ARTIS, TYPE CTM OIL AND EMULSION MIST EXTRACTION: MECHANICAL SEPARATOR, FABR. W + W
Vendedor: G+S Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-turning diameter:425 mm<br/>turning length:1000 mm<br/>control: <br/>swing diameter max. over bed cover:590 mm<br/>swing diameter over face slide:425 mm<br/>turning speeds:40 - 4.000 1/min<br/>spindle hollow:86 mm<br/>spindle:30,5 / 21,5 kw<br/>turret head:12 vdi 40 pos.<br/>turret head drive:13,6 (25%ed) kw<br/>rapid power traverse in x-and z direction:12 / 15 m/min<br/>rotational speed range of tools:4500 1/min<br/>speed range c-axis:0-25 1/min<br/>tailstock quill taper mt:4 <br/>tailstock adjustment:1200 mm<br/>quill stroke:105 mm<br/>total power requirement:41 kva<br/>weight of the machine ca.:8,5 t<br/>dimensions of the machine ca.: m<br/><br/>cnc-lathe, turret head with 12 driven tools,   c-axis tailstock (automatic),  tooleye, hollow clamping device, second (programable or manually) clamping force for chuck, el.handwheel, additional memory up to 1gb, auto turn, cycle for turning/drilling/milling, ethernet, reinforced coolant device 20bar, chipconveyor, filter for coolant, suction, accessories (5 pcs. live tools), 3-jaw chuck forkardt 315mm TURNING DIAMETER:425 MM
TURNING LENGTH:1000 MM
CONTROL:
SWING DIAMETER MAX. OVER BED COVER:590 MM
SWING DIAMETER OVER FACE SLIDE:425 MM
TURNING SPEEDS:40 - 4.000 1/MIN
SPINDLE HOLLOW:86 MM
SPINDLE:30,5 / 21,5 KW
TURRET HEAD:12 VDI 40 POS.
TURRET HEAD DRIVE:13,6 (25%ED) KW
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:12 / 15 M/MIN
ROTATIONAL SPEED RANGE OF TOOLS:4500 1/MIN
SPEED RANGE C-AXIS:0-25 1/MIN
TAILSTOCK QUILL TAPER MT:4
TAILSTOCK ADJUSTMENT:1200 MM
QUILL STROKE:105 MM
TOTAL POWER REQUIREMENT:41 KVA
WEIGHT OF THE MACHINE CA.:8,5 T
DIMENSIONS OF THE MACHINE CA.: M

CNC-LATHE, TURRET HEAD WITH 12 DRIVEN TOOLS, C-AXIS TAILSTOCK (AUTOMATIC), TOOLEYE, HOLLOW CLAMPING DEVICE, SECOND (PROGRAMABLE OR MANUALLY) CLAMPING FORCE FOR CHUCK, EL.HANDWHEEL, ADDITIONAL MEMORY UP TO 1GB, AUTO TURN, CYCLE FOR TURNING/DRILLING/MILLING, ETHERNET, REINFORCED COOLANT DEVICE 20BAR, CHIPCONVEYOR, FILTER FOR COOLANT, SUCTION, ACCESSORIES (5 PCS. LIVE TOOLS), 3-JAW CHUCK FORKARDT 315MM
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 35.000 €
Ubicación: Land-
machine type cnc lathe - inclined bed machine make monforts type rnc 400 plus year 2004 control type cnc storage france country of origin germany delivery after agreement based on cargo from the site technical details

turning diameter 420 mm turning length 600 mm control siemens 840 c speed range 70-4000 rpm additional information

with c axis + y axis and driven tool holder

tool carrier disc turret vdi 40 (12stã¼ck), bore 40 mm;
 kraftspannfutte dia 250 mm, chip conveyor, coolant system, tailstock
 cnc siemens 840 c.
 24 kw 4000 rpm
 good condition
 lots of accessories MACHINE TYPE CNC LATHE - INCLINED BED MACHINE MAKE MONFORTS TYPE RNC 400 PLUS YEAR 2004 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY AFTER AGREEMENT BASED ON CARGO FROM THE SITE TECHNICAL DETAILS TURNING DIAMETER 420 MM TURNING LENGTH 600 MM CONTROL SIEMENS 840 C SPEED RANGE 70-4000 RPM ADDITIONAL INFORMATION WITH C AXIS + Y AXIS AND DRIVEN TOOL HOLDER TOOL CARRIER DISC TURRET VDI 40 (12ST&ATILDE;&FRAC14;CK), BORE 40 MM; KRAFTSPANNFUTTE DIA 250 MM, CHIP CONVEYOR, COOLANT SYSTEM, TAILSTOCK CNC SIEMENS 840 C. 24 KW 4000 RPM GOOD CONDITION LOTS OF ACCESSORIES
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-turning diameter:630 mm<br/>turning length:2000 mm<br/>control:810  <br/>turning diameter over slide:350 mm<br/>spindle turning speed range:3 - 1800 u/min<br/>spindle drive:17 kw<br/>diameter of quill:110 mm<br/>quill stroke:210 mm<br/>total power requirement:23 kva<br/>weight of the machine ca.:6 t<br/>dimensions of the machine ca.:5,0 x 2,0 x 1,8 m<br/><br/>machine with siemens 810 d control - coolant device with paper band filtration - 2 x 3-jaw chuck - splash guard sliding door - exhauster TURNING DIAMETER:630 MM
TURNING LENGTH:2000 MM
CONTROL:810
TURNING DIAMETER OVER SLIDE:350 MM
SPINDLE TURNING SPEED RANGE:3 - 1800 U/MIN
SPINDLE DRIVE:17 KW
DIAMETER OF QUILL:110 MM
QUILL STROKE:210 MM
TOTAL POWER REQUIREMENT:23 KVA
WEIGHT OF THE MACHINE CA.:6 T
DIMENSIONS OF THE MACHINE CA.:5,0 X 2,0 X 1,8 M

MACHINE WITH SIEMENS 810 D CONTROL - COOLANT DEVICE WITH PAPER BAND FILTRATION - 2 X 3-JAW CHUCK - SPLASH GUARD SLIDING DOOR - EXHAUSTER
Vendedor: Schiess-Moweg GmbH
Año de construcción: usado
Ubicación: Land-control mtc-k
turning diameter 290 mm
distance between center 1000 mm
spindle speed 2800 rpm
multifix
chuck diameter 200 mm
tailstock
chip conveyor  CONTROL MTC-K TURNING DIAMETER 290 MM DISTANCE BETWEEN CENTER 1000 MM SPINDLE SPEED 2800 RPM MULTIFIX CHUCK DIAMETER 200 MM TAILSTOCK CHIP CONVEYOR
Vendedor: WMH24
Año de construcción: usado
Ubicación: Land-turning diameter:580 mm<br/>turning length:3000 mm<br/>control:mtc- k <br/>turning diameter over slide rest:310 mm<br/>bed width:400 mm<br/>spindle bore:72 mm<br/>turning speed range:3 - 2800 u/min<br/>speeds infinitely variable range 1:3 - 350 u/min<br/>speeds infinitely variable range 2:10 - 1110 u/min<br/>speeds infinitely variable range 3:24 - 2800 u/min<br/>spindle cone:8 nach din 55027 <br/>rapid speed:7,5/5 m/min<br/>spindle bore:70 mm<br/>torque:1580 nm<br/>tail stock: <br/>tailstock quill diameter:75 mm<br/>tailstock quill taper mt:5 <br/>tailstock quill stroke:160 mm<br/>power capacity at 100 % load:11 kw<br/>total power requirement:16 kw<br/>weight of the machine ca.:4,8 t<br/>dimensions of the machine ca.:4,8 x 1,6 x 1,8 m<br/><br/>cnc control monforts mtc-k 3-jaw chuck bezel Ø = 20- 190 mm, fixed bezel  Ø = 160 - 340 mm TURNING DIAMETER:580 MM
TURNING LENGTH:3000 MM
CONTROL:MTC- K
TURNING DIAMETER OVER SLIDE REST:310 MM
BED WIDTH:400 MM
SPINDLE BORE:72 MM
TURNING SPEED RANGE:3 - 2800 U/MIN
SPEEDS INFINITELY VARIABLE RANGE 1:3 - 350 U/MIN
SPEEDS INFINITELY VARIABLE RANGE 2:10 - 1110 U/MIN
SPEEDS INFINITELY VARIABLE RANGE 3:24 - 2800 U/MIN
SPINDLE CONE:8 NACH DIN 55027
RAPID SPEED:7,5/5 M/MIN
SPINDLE BORE:70 MM
TORQUE:1580 NM
TAIL STOCK:
TAILSTOCK QUILL DIAMETER:75 MM
TAILSTOCK QUILL TAPER MT:5
TAILSTOCK QUILL STROKE:160 MM
POWER CAPACITY AT 100 % LOAD:11 KW
TOTAL POWER REQUIREMENT:16 KW
WEIGHT OF THE MACHINE CA.:4,8 T
DIMENSIONS OF THE MACHINE CA.:4,8 X 1,6 X 1,8 M

CNC CONTROL MONFORTS MTC-K 3-JAW CHUCK BEZEL Ø = 20- 190 MM, FIXED BEZEL Ø = 160 - 340 MM
Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Ubicación: Land-no. 4663: 

1 used cnc lathe 4 axes with workpiece storage
make monforts, mod mhc pickup
new in 2005
with sinumerik 840 d
workrange: umlauf - Ø 560 mm
main motor: 23/33 kw 

equipment: 
pws workpiece storage
15 pallets for pws for Ø 110-220 mm / height 170-110 mm
3 - jaw chuck 315 mm
c-axis 0.001 
12 station tool turret vdi 40
driven tools 4000 min-1
y-axis +/-50 mm
chip conveyor with strap hinge
coolant system 2.5 / 10 bar
documentation

remarks:
spindle head size a8 / 130 mm
material flow 85 mm

spindle speed 32-4000 min-1
speed range c-axis maximum 25 min-1

travel x/z - axis 250 / 600 mm

space requirement approx.  5.5 x 3 m
weight 7 to

transport dimensions
machine approx. 2.6 x 2.4 x 2.8 m
pws approx. 2.4 x 1.5 m
chip conveyors approx. 4 x 0.6 m  NO. 4663: 1 USED CNC LATHE 4 AXES WITH WORKPIECE STORAGE MAKE MONFORTS, MOD MHC PICKUP NEW IN 2005 WITH SINUMERIK 840 D WORKRANGE: UMLAUF - Ø 560 MM MAIN MOTOR: 23/33 KW EQUIPMENT: PWS WORKPIECE STORAGE 15 PALLETS FOR PWS FOR Ø 110-220 MM / HEIGHT 170-110 MM 3 - JAW CHUCK 315 MM C-AXIS 0.001 12 STATION TOOL TURRET VDI 40 DRIVEN TOOLS 4000 MIN-1 Y-AXIS +/-50 MM CHIP CONVEYOR WITH STRAP HINGE COOLANT SYSTEM 2.5 / 10 BAR DOCUMENTATION REMARKS: SPINDLE HEAD SIZE A8 / 130 MM MATERIAL FLOW 85 MM SPINDLE SPEED 32-4000 MIN-1 SPEED RANGE C-AXIS MAXIMUM 25 MIN-1 TRAVEL X/Z - AXIS 250 / 600 MM SPACE REQUIREMENT APPROX. 5.5 X 3 M WEIGHT 7 TO TRANSPORT DIMENSIONS MACHINE APPROX. 2.6 X 2.4 X 2.8 M PWS APPROX. 2.4 X 1.5 M CHIP CONVEYORS APPROX. 4 X 0.6 M
Vendedor: EnTeHa GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-turning diameter: 530 mm<br/>turning length: 1500 mm<br/>control: mtc-k <br/>turning diameter over slide: 290 mm<br/>3-jaw-chuck diameter: 315 mm<br/>quick change tool holder: multifix <br/>steady: 180 mm<br/>turning speeds: 2800 u/min<br/>transmission ratio: 3 <br/>spindle passage: 65 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TURNING DIAMETER: 530 MM
TURNING LENGTH: 1500 MM
CONTROL: MTC-K
TURNING DIAMETER OVER SLIDE: 290 MM
3-JAW-CHUCK DIAMETER: 315 MM
QUICK CHANGE TOOL HOLDER: MULTIFIX
STEADY: 180 MM
TURNING SPEEDS: 2800 U/MIN
TRANSMISSION RATIO: 3
SPINDLE PASSAGE: 65 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-cnc lathe of monforts rnc4steuerung monforts control system fmeã?arm, meã?tastermax. turning length: 600 mmdurchlass: 65 mmumlaufdurchmesser over radial slide: 280 mmumlaufdurchmesser the bed: 420 mmx: 250 mmz: 620 mmspindelaufnahme a6 din 69880revolver with 12 aufnahmenspindelbohrung: 40 mmkã¼hlmittelpumpe 40 l / min. drezhalbereich: 70-4000 rpm. total power: 18.5 kwgesamtanschluã?wert: 40 kvaflã¤chenbedarf lxwxh: 4665/2732/2158 mmweigth: approx. 7.5 toincl. spã¤nefã¶rdererbaujahr 1990kann running under power are spotted.  CNC LATHE OF MONFORTS RNC4STEUERUNG MONFORTS CONTROL SYSTEM FME&ATILDE;?ARM, ME&ATILDE;?TASTERMAX. TURNING LENGTH: 600 MMDURCHLASS: 65 MMUMLAUFDURCHMESSER OVER RADIAL SLIDE: 280 MMUMLAUFDURCHMESSER THE BED: 420 MMX: 250 MMZ: 620 MMSPINDELAUFNAHME A6 DIN 69880REVOLVER WITH 12 AUFNAHMENSPINDELBOHRUNG: 40 MMK&ATILDE;&FRAC14;HLMITTELPUMPE 40 L / MIN. DREZHALBEREICH: 70-4000 RPM. TOTAL POWER: 18.5 KWGESAMTANSCHLU&ATILDE;?WERT: 40 KVAFL&ATILDE;&CURREN;CHENBEDARF LXWXH: 4665/2732/2158 MMWEIGTH: APPROX. 7.5 TOINCL. SP&ATILDE;&CURREN;NEF&ATILDE;&PARA;RDERERBAUJAHR 1990KANN RUNNING UNDER POWER ARE SPOTTED.
Vendedor: Maschinendrehpunkt
Año de construcción: usado
Ubicación: Land-turning diameter: 375 mm<br/>turning length: 2000 mm<br/>control: mtc-k <br/>turning speed range: 3-1800 u/min<br/>transmission ratio: 4 manuell <br/>spindle nose: a2-8 <br/>swing dia.: 630 mm<br/>tool holder: multifix  d1 <br/>chuck:: forkardt <br/>total power requirement: 21 kw<br/><br/><br/><br/><br/> TURNING DIAMETER: 375 MM
TURNING LENGTH: 2000 MM
CONTROL: MTC-K
TURNING SPEED RANGE: 3-1800 U/MIN
TRANSMISSION RATIO: 4 MANUELL
SPINDLE NOSE: A2-8
SWING DIA.: 630 MM
TOOL HOLDER: MULTIFIX D1
CHUCK:: FORKARDT
TOTAL POWER REQUIREMENT: 21 KW




Vendedor: 5X Machines GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 904631
number: 1 pcs.
manufacturer: monforts
type: mhc pickup
control: siemens 840 d powerline
year of construction: 2006
state of preservation: second-hand machine
stories about: 1-2 layers

description

turning

maximum turning diameter 390/520 mm
maximum swing over bed cover 560 mm
max speed main spindle 4000 1/min
maximum performance main spindle in ed 10-40 / 100% 31/21.5 kw
maximum torque of main spindle in ed 10-40 / 100% 635/424 nm
main spindle spindle passage 86 mm
part clamping cylinder to the main spindle
turret top

number of stations of which powered 12/12
tool holder in the vdi 40 turret
the turret of x/z axes
direct measuring system x/z

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
chip conveyor
machine is / was operated with emulsion
coolant system with paper band filter
rotating part memory band
external loading and unloading loading portal
thread cutting without compensating chuck
accessories

1 stk. 3 - jaw chuck 250/400 mm
1 set of tool holder for rotary tools
1 set of tool holders for driven tools

general technical data

machine dimensions (lxwxh) approx. 2300 x 2445 x 2215 mm
machine weight approx. 7500 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904631 NUMBER: 1 PCS. MANUFACTURER: MONFORTS TYPE: MHC PICKUP CONTROL: SIEMENS 840 D POWERLINE YEAR OF CONSTRUCTION: 2006 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 1-2 LAYERS DESCRIPTION TURNING MAXIMUM TURNING DIAMETER 390/520 MM MAXIMUM SWING OVER BED COVER 560 MM MAX SPEED MAIN SPINDLE 4000 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 31/21.5 KW MAXIMUM TORQUE OF MAIN SPINDLE IN ED 10-40 / 100% 635/424 NM MAIN SPINDLE SPINDLE PASSAGE 86 MM PART CLAMPING CYLINDER TO THE MAIN SPINDLE TURRET TOP NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE VDI 40 TURRET THE TURRET OF X/Z AXES DIRECT MEASURING SYSTEM X/Z MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA CHIP CONVEYOR MACHINE IS / WAS OPERATED WITH EMULSION COOLANT SYSTEM WITH PAPER BAND FILTER ROTATING PART MEMORY BAND EXTERNAL LOADING AND UNLOADING LOADING PORTAL THREAD CUTTING WITHOUT COMPENSATING CHUCK ACCESSORIES 1 STK. 3 - JAW CHUCK 250/400 MM 1 SET OF TOOL HOLDER FOR ROTARY TOOLS 1 SET OF TOOL HOLDERS FOR DRIVEN TOOLS GENERAL TECHNICAL DATA MACHINE DIMENSIONS (LXWXH) APPROX. 2300 X 2445 X 2215 MM MACHINE WEIGHT APPROX. 7500 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 580 mm<br/>turning length: 3.000 mm<br/>control: monforts control mtc-k <br/>total power requirement: 17 kw<br/>weight of the machine ca.: 6.300 kg<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TURNING DIAMETER: 580 MM
TURNING LENGTH: 3.000 MM
CONTROL: MONFORTS CONTROL MTC-K
TOTAL POWER REQUIREMENT: 17 KW
WEIGHT OF THE MACHINE CA.: 6.300 KG
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-
major textile knitting  plant liquidation 
(please your intrest with confirmed target price immedaitely)

 
 
knitting
12
monarch fil 8aeq, 30 MAJOR TEXTILE KNITTING PLANT LIQUIDATION (PLEASE YOUR INTREST WITH CONFIRMED TARGET PRICE IMMEDAITELY) KNITTING 12 MONARCH FIL 8AEQ, 30", 4-18 CUT, 8-24 CUT, 84 FEED 2 MONARCH FIL 8AEQ, 30", 18 CUT, 84 FEED, 50 % LYCRA 10 MONARCH FIM 108A, 30", 24 CUT, 108 FEED 1 MONARCH FDR RIB, 26", 14 CUT, 52 FEED 3 MONARCH RIB, 26", 14 CUT, 52 FEED, LYCRA 1 MONARCH RIB, 20", 14 CUT, 40 FEED 1 MONARCH SEC ELECTRONIC STRIPER, 30", 16 CUT, 36 FEED 6 MONARCH FXC4S, 30', 20 CUT, 122 FEED 4 MONARCH RACE, 30", 28 CUT, 122 CUT 1 MONARCH STEP JACK, 30", 20 CUT, 72 FEED 14 MONARCH RXDF, 30", 122 FEED, 3-24 CUT, 6-22 CUT, 5-18 CUT, 24 MONARCH RX4S, 26", 104 FD, 2-28 CUT, 4-24 CUT, 9-18 CUT, 9-22 CUT, 7 MONARCH FXC 4S, 26", 20 CUT, 104 FD. 6 MONARCH RX4S, 26", 20 CUT, 104 FD. 8 MONARCH RX WSY STRIPER, 30", 48 FEED, 5-16 CUT, 1-18 CUT, 1-28 CUT FLAT KNITTING 2 PROTTI PV94 DOUBLELOCK, 240 CM, 12 GAUGE 6 PROTTI PT222, 213 CM, 12 CUT 9 PROTTI PT242 JACQUARD, 218 CM, 12 CUT 35 STOLL JBOMB, 150 CM, 160 CM & 180 CM, 12 GAUGE DYEING 1 GASTON JET DYE, 80 LB., 1996, M6000 CONTROLLER 4 SCLAVOS JET DYE, VENUS HT3, 3 PORT, 1000 LBS., 50 PSI, 1999, UPDATED RECORE CONTROLS, 2014-15 3 GASTON FUTURA, 2 PORT, 1000 LBS., 53 PSI, BARCO CONTROLS, 1987 1 GASTON FUTURA JET DYE, SINGLE TUBE, 160 LBS,, 1992, M3000 CONTROLLER 4 RECORE DYE MACHINE CONTROLLERS, 2012-14 6 THEN AIRFLOW, 1200 LBS., 3 STRAND/3 PORTS, 1988 1 THEN AIRFLOW, 400 LBS., 1 PORT, 1987 3 ARGANTHAN JET DYE, 80 LBS. EACH, 60 PSI, 1982-80 1 ARGANTHAN JET DYE, 400 LBS., 60 PSI, 1982 11 ARGANTHAN JET DYE, 4 PORTS, 1000 LBS., 60 PSI, 1980 7 GASTON 824 JET DYE, 5-3 PORT, 2-2 PORT 200 STAINLESS MIXING TANKS WITH MIXERS, 50 TO 250 GAL. 200 DYEHOUSE TRUCKS, 72" X 42" WIDE X 35" DP. FINISHING 1 SANTEX SANTASTRECH PLUS 120, 48" WIDE, 120 CM, BALLOON EXTRACTOR, 5 TO 60 YPM, 1994 1 SANTEX SANTASHRINK DRYER, 220 CM WIDE, WITH PIN TENTER ENTRY, 1994, 6K/220 GAS IR SRS + SPR+FOUL+CUT, GAS FIRED, 6 CHAMBERS, 2400 LBS./HOUR EVAPORATION CAPACITY, 6.1 MIL BTU/HR 1 TUBETEX DRYER #6 GAS FIRED DRUM, ENTRY WITH 3- FABCON PADDERS 1 BIANCO SLITTER, 86" WIDE, BIANCO SLITTER HEAD (UPDATED 2015), ROPE SQUEEZE, DETWISTER, FOLDER, STAINLESS STEEL 1 BIANCO SLITTER, 86" WIDE, OPENER AND DETWISTER, 2 SCROLLED ROLLS, FLAT FOLDER 1 STENTEX TENTER STENTOTHERM 3300, 1995, 2400 MM MAX. WORKING WIDTH, UNWIND, J BOX, DOGAL UNCURLER, 2 SANTEX PADDERS, 102" WIDE, BIANCO WEFT STRAIGHTNER, E & L GUIDERS, LOW PROFILE GAS FIRED 12 ZONES, 1 KRANTZ SYNCRO SHRINK CONVEYOR DRYER, 100" WIDE BELT 2 FAMATEX TENTER #1 & #2 3 TUBE TEX DRUM DRYERS, 48" WIDE & 72" WIDE 1 FABCON DRUM DRYER, 8 ZONE 5 TUBULAR INSPECTION MACHINES 6 6 FABCON TUBULAR GULLWING TUBULAR COMPACTORS, 52" WIDE FABCON & TUBETEX TUBULAR CALENDARS, 50" & 60" WIDE 1 ARGATHEN BLEACH RANGE, 10 SECTION, 2200 LBS. HOUR. 1 JEMCO BLEACH RANGE, MODEL III 2000 CBR, 2,000 LBS. HOUR, 1995 1 CURTIS & MARBLE, PLASTIC ROLL WRAPPING 1 BESPOKE DYE MIXING SYSTEM, YEAR 2000, 16 PUMPS, 2 MODEL SRD EXACT WEIGH LIQUID CHEMICAL COLLECTING, MIXING, BATCH WEIGHING, 2 IR DUAL HEAD CENTRIFUGAL PUMP, METTLER INTERGRATED SCALE 1 TUBE TEX, DRUM DRYER 1999, WITH 3 TUBE TEX TUBULAR PADDERS 1 1 MONFORTS KNITGOODS TOPTEX 92" WIDE, OPEN WIDTH RUBBER BELT COMPACTOR, KOMBI BATCHER, STEAM HEATED MAIN CYLINDER, 1990 FABCON OPEN PIN TENTER, 90" WIDE X 20' LONG, STEAMING SECTION, BATCHER 1 LABORATORY: RAITECH QUICKWASH, DATACOLOR 500, MILNOR WASHER, HUEBSCH DRYER 50 LB., PLUS MANY MORE ITEMS 25 MERROW SEWING MACHINES, WITH TABLE AND MOTOR 2 GARDNER DENVER AIR COMPRESSOR, 60 HP 1 GARDNER DENVER AIR COMPRESSOR, 200 HP 3 INGERSOLL-RAND SCREW COMPRESSOR, 2- 250 HP, 1-150 HP 3 PROPANE STORAGE TANKS, 30,000 GALLON, WITH MIXER 4 STAINLESS STEEL OUTSIDE TANKS, 6000 GAL TO 10,000 GAL. 3 WASTE BALERS, VERTICAL STYLE 2 CLEAVER BROOKS PACKAGE BOILERS, 800 HP, 1988 + 1989, DEARATOR SYSTEM PLEASE CONTACT US FOR FURTHER INFORMATION .
Vendedor: American Traders
Año de construcción: usado
Ubicación: Land-monforts stenter for woven fabric model montex 8f. year 1997

- impregnation padder

- 8 chambers, roller width 3300 mm

- horizontal pin and clip chain

- gas heated MONFORTS STENTER FOR WOVEN FABRIC MODEL MONTEX 8F. YEAR 1997 - IMPREGNATION PADDER - 8 CHAMBERS, ROLLER WIDTH 3300 MM - HORIZONTAL PIN AND CLIP CHAIN - GAS HEATED
Vendedor: Inautex
Año de construcción: usado
Ubicación: Land-
z310 hydraulic power chuck forkardt model kl 250 / 4m-34941
  three-jaw chuck with hydraulic cylinder both forkardt .ausgebaut from lathe of monforts.
  i have crates forkaerdtbacken if required they be sorted
  and can be supplied with 
 Z310 HYDRAULIC POWER CHUCK FORKARDT MODEL KL 250 / 4M-34941 THREE-JAW CHUCK WITH HYDRAULIC CYLINDER BOTH FORKARDT .AUSGEBAUT FROM LATHE OF MONFORTS. I HAVE CRATES FORKAERDTBACKEN IF REQUIRED THEY BE SORTED AND CAN BE SUPPLIED WITH
Vendedor: Ostertag-Plastic
Año de construcción: usado
Precio: 12.000 €
Ubicación: Land-lathe - cycle controlled monforts knc 5-1000 no. 1105-02334 make monforts type knc 5 - 1000 year 2001 state second-hand machine control cnc mtc k storage france country of origin germany delivery immediately cargo base from site tech niche details turning diameter 250 mm turning length 1000 mm control mtc k swing over bed slide 290 mm swing 555 mm x 235 mm travel - travel - z 1500 mm spindle head din 55027 / 8 x 220 bar diameter 68 mm chuck diameter 250 mm express power x-axis 5 m / min rapid traverse z axis 10 m / min spindle taper multifix c quill diameter 80 mm quill stroke 160 mm mount mt 5 rpm - stem 2 ~ 2,800 rpm gearbox stage 1 2 ~ 280 rpm gearbox stage 2 7 ~ 1,120 rpm gearbox stage 3 28 ~ 2,800 rpm 
total power 32 kw machine weight 3.3 tons of space approximately 3.4 x 1.6 x 1.8 m accessories coolant system tailstock div. tool holders  

 LATHE - CYCLE CONTROLLED MONFORTS KNC 5-1000 NO. 1105-02334 MAKE MONFORTS TYPE KNC 5 - 1000 YEAR 2001 STATE SECOND-HAND MACHINE CONTROL CNC MTC K STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASE FROM SITE TECH NICHE DETAILS TURNING DIAMETER 250 MM TURNING LENGTH 1000 MM CONTROL MTC K SWING OVER BED SLIDE 290 MM SWING 555 MM X 235 MM TRAVEL - TRAVEL - Z 1500 MM SPINDLE HEAD DIN 55027 / 8 X 220 BAR DIAMETER 68 MM CHUCK DIAMETER 250 MM EXPRESS POWER X-AXIS 5 M / MIN RAPID TRAVERSE Z AXIS 10 M / MIN SPINDLE TAPER MULTIFIX C QUILL DIAMETER 80 MM QUILL STROKE 160 MM MOUNT MT 5 RPM - STEM 2 ~ 2,800 RPM GEARBOX STAGE 1 2 ~ 280 RPM GEARBOX STAGE 2 7 ~ 1,120 RPM GEARBOX STAGE 3 28 ~ 2,800 RPM TOTAL POWER 32 KW MACHINE WEIGHT 3.3 TONS OF SPACE APPROXIMATELY 3.4 X 1.6 X 1.8 M ACCESSORIES COOLANT SYSTEM TAILSTOCK DIV. TOOL HOLDERS
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-nominal width: 2600mm, length: 15850mm, production width: 500-2400mm, speed: 2,5-100m/min, year of construction: 1999, including winder suchy fbw 2200: production width: 2200mm pax., speed: 2,5-100m/min, year of construction: 2007, machines will not be sold separately.  NOMINAL WIDTH: 2600MM, LENGTH: 15850MM, PRODUCTION WIDTH: 500-2400MM, SPEED: 2,5-100M/MIN, YEAR OF CONSTRUCTION: 1999, INCLUDING WINDER SUCHY FBW 2200: PRODUCTION WIDTH: 2200MM PAX., SPEED: 2,5-100M/MIN, YEAR OF CONSTRUCTION: 2007, MACHINES WILL NOT BE SOLD SEPARATELY.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 7.000 €
Ubicación: Land-1xmonforts mnc 600-2 &amp; 1xmonforts rnc 602 siemens s3 cnc control system
drive power 30 kw
speed range 28-4,000 1 / min
rotating diameter 360 mm (max)
rotating 600 mm length (max)
dimension 4000 x 2400 x 2200 mm
  1XMONFORTS MNC 600-2 &AMP; 1XMONFORTS RNC 602 SIEMENS S3 CNC CONTROL SYSTEM DRIVE POWER 30 KW SPEED RANGE 28-4,000 1 / MIN ROTATING DIAMETER 360 MM (MAX) ROTATING 600 MM LENGTH (MAX) DIMENSION 4000 X 2400 X 2200 MM
Vendedor: Asset-Trade - Bewertung & Vermarktung
Año de construcción: usado
Ubicación: Land-x-travel: 290mm, z-travel: 1100mm, swing diameter over cross slide: 260mm, swing diameter over bed: 520mm, turning length: 1000mm, outside diameter of the sleeve: 120mm, quill stroke: 150mm. control: fanuc. accessories: chip conveyor.  X-TRAVEL: 290MM, Z-TRAVEL: 1100MM, SWING DIAMETER OVER CROSS SLIDE: 260MM, SWING DIAMETER OVER BED: 520MM, TURNING LENGTH: 1000MM, OUTSIDE DIAMETER OF THE SLEEVE: 120MM, QUILL STROKE: 150MM. CONTROL: FANUC. ACCESSORIES: CHIP CONVEYOR.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-1 monforts stenter type  tmsf-6f
year 1973, working width 180 cm, thermal oil heating, 6 fields, horizontal pin chain, padder , mahlo weft straightener type rfmc 10p year 2000, exit with a-frame winder and plaiter, machine equipped with fire detection and automatic extinction, machine has been regularly updated 1 MONFORTS STENTER TYPE TMSF-6F YEAR 1973, WORKING WIDTH 180 CM, THERMAL OIL HEATING, 6 FIELDS, HORIZONTAL PIN CHAIN, PADDER , MAHLO WEFT STRAIGHTENER TYPE RFMC 10P YEAR 2000, EXIT WITH A-FRAME WINDER AND PLAITER, MACHINE EQUIPPED WITH FIRE DETECTION AND AUTOMATIC EXTINCTION, MACHINE HAS BEEN REGULARLY UPDATED
Vendedor: LUSAMATEX - Máquinas Têxteis, Lda.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MONFORTS types: