745 ofertas

Año de construcción: usado
Ubicación: Land-wire diamter range: 1.5-3.1 mm
mesh width:         40-70 mm
working width:      max 2000 mm
output:             max 290 m² per hour WIRE DIAMTER RANGE: 1.5-3.1 MM MESH WIDTH: 40-70 MM WORKING WIDTH: MAX 2000 MM OUTPUT: MAX 290 M² PER HOUR
Vendedor: WEBER KG
Año de construcción: usado
Precio: 416.750 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-type: tr 7 d 200.6,0/5s-84 m â²
built in 2000
total baking area: 84 mâ²
required thermal power total ca. 504 kw
number of baking chambers: 7
each baking chamber baking surface: 12 mâ²
usable bandwidth: 2 m
exterior, back doors, input and output-
fronts, both sides, show - and maintenance-
doors made of stainless steel

equipment each baking chamber:
special-hinge-plate belt miwe spb with average
going flat baking surface without mesh printing
band load up to 50 kg / m â²
electro mechanical belt drive
back height inside: 200 mm

incl. thermal oil: supply temperature: 320 â° c
thermo-oil backraumtermperatur up to 300 â° c
(info: thermo-oil was 2013 replaced/renewed)
the heating and humidification is performed by separate
guess low pressure steam boiler
accessories: loos low pressure steam boiler with water softener

incl. miwe boiler central hkz
boiler max power. 350 kw
with elco burner for natural gas
without tank tank!
year 2000 (2013 electrically partly renewed)

incl. miwe docking station ads
for fermentation car size: 2, 0 x 0, 6 x 1, 95 m (no car)
including safety device
built in 2000

incl. miwe butler
bandwidth/m: 2.0
step length/m: 1.20
with plc
tipping for rolls
built in 2000
 TYPE: TR 7 D 200.6,0/5S-84 M ² BUILT IN 2000 TOTAL BAKING AREA: 84 M² REQUIRED THERMAL POWER TOTAL CA. 504 KW NUMBER OF BAKING CHAMBERS: 7 EACH BAKING CHAMBER BAKING SURFACE: 12 M² USABLE BANDWIDTH: 2 M EXTERIOR, BACK DOORS, INPUT AND OUTPUT- FRONTS, BOTH SIDES, SHOW - AND MAINTENANCE- DOORS MADE OF STAINLESS STEEL EQUIPMENT EACH BAKING CHAMBER: SPECIAL-HINGE-PLATE BELT MIWE SPB WITH AVERAGE GOING FLAT BAKING SURFACE WITHOUT MESH PRINTING BAND LOAD UP TO 50 KG / M ² ELECTRO MECHANICAL BELT DRIVE BACK HEIGHT INSIDE: 200 MM INCL. THERMAL OIL: SUPPLY TEMPERATURE: 320 ° C THERMO-OIL BACKRAUMTERMPERATUR UP TO 300 ° C (INFO: THERMO-OIL WAS 2013 REPLACED/RENEWED) THE HEATING AND HUMIDIFICATION IS PERFORMED BY SEPARATE GUESS LOW PRESSURE STEAM BOILER ACCESSORIES: LOOS LOW PRESSURE STEAM BOILER WITH WATER SOFTENER INCL. MIWE BOILER CENTRAL HKZ BOILER MAX POWER. 350 KW WITH ELCO BURNER FOR NATURAL GAS WITHOUT TANK TANK! YEAR 2000 (2013 ELECTRICALLY PARTLY RENEWED) INCL. MIWE DOCKING STATION ADS FOR FERMENTATION CAR SIZE: 2, 0 X 0, 6 X 1, 95 M (NO CAR) INCLUDING SAFETY DEVICE BUILT IN 2000 INCL. MIWE BUTLER BANDWIDTH/M: 2.0 STEP LENGTH/M: 1.20 WITH PLC TIPPING FOR ROLLS BUILT IN 2000
Vendedor: Backservice Gaux GmbH
Año de construcción: usado
Ubicación: Land-make gesellschaft fuer oeltechnik mbh waghäusel, type e-302b, no 106/1545/86, new 1986, heat exchanger , heating surface 11,1 m2, tube material stainless steel , shell material stainless steel (1.4541), tube capacity 58 ltr, number of tubes: 62, tube diameter 16mm, tube length +/- 3000mm, working pressure tubes 13 bar, test pressure tubes 18,2 bar, max. temperature -20 / 200 degr.c, shell capacity 100 ltr, working pressure shell 13 bar, test pressure shell 18,2 bar, max. temperature -20 / 75 degr.c., shell connections (2x) dia.50mm, (2x) dia.25mm, cover connections (2x) dia.100.., floorspace 3,7x0,7 mheat exchangersheat exchangers > heat exchangers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE GESELLSCHAFT FUER OELTECHNIK MBH WAGHäUSEL, TYPE E-302B, NO 106/1545/86, NEW 1986, HEAT EXCHANGER , HEATING SURFACE 11,1 M2, TUBE MATERIAL STAINLESS STEEL , SHELL MATERIAL STAINLESS STEEL (1.4541), TUBE CAPACITY 58 LTR, NUMBER OF TUBES: 62, TUBE DIAMETER 16MM, TUBE LENGTH +/- 3000MM, WORKING PRESSURE TUBES 13 BAR, TEST PRESSURE TUBES 18,2 BAR, MAX. TEMPERATURE -20 / 200 DEGR.C, SHELL CAPACITY 100 LTR, WORKING PRESSURE SHELL 13 BAR, TEST PRESSURE SHELL 18,2 BAR, MAX. TEMPERATURE -20 / 75 DEGR.C., SHELL CONNECTIONS (2X) DIA.50MM, (2X) DIA.25MM, COVER CONNECTIONS (2X) DIA.100.., FLOORSPACE 3,7X0,7 MHEAT EXCHANGERSHEAT EXCHANGERS > HEAT EXCHANGERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-waterjet - cutting machine, year 2017 as new
milling spindle, 2 heads, changing tables

3,800 bar - for cutting foams, plastics, textile, leather, cardboard, etc.

make: expert systems technology / thyssen uhde
type: cutexpert variojet
year of constr.: 2017

work area: 2,000 x 1.600 mm
max material thickness: 100 mm
rapid traverse max: 60 m / min
cutting nozzle diameter: 0.08 - 0.20 mm high pressure pump
make: uhde thyssenkrupp
type: hps 4022
pressure max: 3,800 bar
power: 22 kw

milling spindle
make: jã¤ger
maximum speed: 30,000 rpm

equipment / options:
-2 heads, 1 x with a milling spindle
-changing tables
-tables designed with va honeycomb elements
-including bagging filter
-including mobile compressor (metabo)
--program controlled height adjustment
-dxf import module
-nesting software module
-software module material database

footprint approximately: b = approx. 9 x 4 m, weight: 3500 kg

condition:
almost as good as new machine, comes from insolventem operation. 
delivered 10/2017, only about a year in operation.

price:
new price = (without installation) 232,000,-â?¬
requirement, net, from location north rhine-westphalia / germany
 WATERJET - CUTTING MACHINE, YEAR 2017 AS NEW MILLING SPINDLE, 2 HEADS, CHANGING TABLES 3,800 BAR - FOR CUTTING FOAMS, PLASTICS, TEXTILE, LEATHER, CARDBOARD, ETC. MAKE: EXPERT SYSTEMS TECHNOLOGY / THYSSEN UHDE TYPE: CUTEXPERT VARIOJET YEAR OF CONSTR.: 2017 WORK AREA: 2,000 X 1.600 MM MAX MATERIAL THICKNESS: 100 MM RAPID TRAVERSE MAX: 60 M / MIN CUTTING NOZZLE DIAMETER: 0.08 - 0.20 MM HIGH PRESSURE PUMP MAKE: UHDE THYSSENKRUPP TYPE: HPS 4022 PRESSURE MAX: 3,800 BAR POWER: 22 KW MILLING SPINDLE MAKE: JäGER MAXIMUM SPEED: 30,000 RPM EQUIPMENT / OPTIONS: -2 HEADS, 1 X WITH A MILLING SPINDLE -CHANGING TABLES -TABLES DESIGNED WITH VA HONEYCOMB ELEMENTS -INCLUDING BAGGING FILTER -INCLUDING MOBILE COMPRESSOR (METABO) --PROGRAM CONTROLLED HEIGHT ADJUSTMENT -DXF IMPORT MODULE -NESTING SOFTWARE MODULE -SOFTWARE MODULE MATERIAL DATABASE FOOTPRINT APPROXIMATELY: B = APPROX. 9 X 4 M, WEIGHT: 3500 KG CONDITION: ALMOST AS GOOD AS NEW MACHINE, COMES FROM INSOLVENTEM OPERATION. DELIVERED 10/2017, ONLY ABOUT A YEAR IN OPERATION. PRICE: NEW PRICE = (WITHOUT INSTALLATION) 232,000,-Â?¬ REQUIREMENT, NET, FROM LOCATION NORTH RHINE-WESTPHALIA / GERMANY
Vendedor: 5m+ GmbH
Año de construcción: usado
Ubicación: Land-make busch vacuumteknik a.s, type wa3100co, no 0009/931100, new 2003, blower , material mild steel , capacity 348 - 1581 m3/h, motor 30 kw, 400-690/440-760 volt, with air filter , inlet dia. 125mm, outlet dia. 125mm, mounted on frame , floorspace 1.8x1.1 m, total height 1.3 m, weight 650 kgblowersblowers > blowers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE BUSCH VACUUMTEKNIK A.S, TYPE WA3100CO, NO 0009/931100, NEW 2003, BLOWER , MATERIAL MILD STEEL , CAPACITY 348 - 1581 M3/H, MOTOR 30 KW, 400-690/440-760 VOLT, WITH AIR FILTER , INLET DIA. 125MM, OUTLET DIA. 125MM, MOUNTED ON FRAME , FLOORSPACE 1.8X1.1 M, TOTAL HEIGHT 1.3 M, WEIGHT 650 KGBLOWERSBLOWERS > BLOWERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-waterjet - cutting machine, year 2017 as new
milling spindle, 2 heads, changing tables

3,800 bar - for cutting foams, plastics, textile, leather, cardboard, etc.

make: expert systems technology / thyssen uhde
type: cutexpert variojet
year of constr.: 2017

work area: 2,000 x 1.600 mm
max material thickness: 100 mm
rapid traverse max: 60 m / min
cutting nozzle diameter: 0.08 - 0.20 mm high pressure pump
make: uhde thyssenkrupp
type: hps 4022
pressure max: 3,800 bar
power: 22 kw

milling spindle
make: jã¤ger
maximum speed: 30,000 rpm

equipment / options:
-2 heads, 1 x with a milling spindle
-changing tables
-tables designed with va honeycomb elements
-including bagging filter
-including mobile compressor (metabo)
--program controlled height adjustment
-dxf import module
-nesting software module
-software module material database

footprint approximately: b = approx. 9 x 4 m, weight: 3500 kg

condition:
almost as good as new machine, comes from insolventem operation. 
delivered 10/2017, only about a year in operation.

price:
new price = (without installation) 232,000,-â?¬
requirement, net, from location north rhine-westphalia / germany
 WATERJET - CUTTING MACHINE, YEAR 2017 AS NEW MILLING SPINDLE, 2 HEADS, CHANGING TABLES 3,800 BAR - FOR CUTTING FOAMS, PLASTICS, TEXTILE, LEATHER, CARDBOARD, ETC. MAKE: EXPERT SYSTEMS TECHNOLOGY / THYSSEN UHDE TYPE: CUTEXPERT VARIOJET YEAR OF CONSTR.: 2017 WORK AREA: 2,000 X 1.600 MM MAX MATERIAL THICKNESS: 100 MM RAPID TRAVERSE MAX: 60 M / MIN CUTTING NOZZLE DIAMETER: 0.08 - 0.20 MM HIGH PRESSURE PUMP MAKE: UHDE THYSSENKRUPP TYPE: HPS 4022 PRESSURE MAX: 3,800 BAR POWER: 22 KW MILLING SPINDLE MAKE: JäGER MAXIMUM SPEED: 30,000 RPM EQUIPMENT / OPTIONS: -2 HEADS, 1 X WITH A MILLING SPINDLE -CHANGING TABLES -TABLES DESIGNED WITH VA HONEYCOMB ELEMENTS -INCLUDING BAGGING FILTER -INCLUDING MOBILE COMPRESSOR (METABO) --PROGRAM CONTROLLED HEIGHT ADJUSTMENT -DXF IMPORT MODULE -NESTING SOFTWARE MODULE -SOFTWARE MODULE MATERIAL DATABASE FOOTPRINT APPROXIMATELY: B = APPROX. 9 X 4 M, WEIGHT: 3500 KG CONDITION: ALMOST AS GOOD AS NEW MACHINE, COMES FROM INSOLVENTEM OPERATION. DELIVERED 10/2017, ONLY ABOUT A YEAR IN OPERATION. PRICE: NEW PRICE = (WITHOUT INSTALLATION) 232,000,-Â?¬ REQUIREMENT, NET, FROM LOCATION NORTH RHINE-WESTPHALIA / GERMANY
Vendedor: 5m+ GmbH
Año de construcción: usado
Ubicación: Land-make busch vacuumteknik a.s.[dk], type wa3080co, no 43570 / 931080, new 2005, blower , material mild steel , capacity 288 - 1167 m3/h, motor 22/26,4 kw, 400-690/480-630 volt, with air filter , inlet dia.125mm, outlet dia.125mm, mounted on frame , floorspace 1.8x0.8 m, total height 1.6 m, weight 560 kgblowersblowers > blowers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE BUSCH VACUUMTEKNIK A.S.[DK], TYPE WA3080CO, NO 43570 / 931080, NEW 2005, BLOWER , MATERIAL MILD STEEL , CAPACITY 288 - 1167 M3/H, MOTOR 22/26,4 KW, 400-690/480-630 VOLT, WITH AIR FILTER , INLET DIA.125MM, OUTLET DIA.125MM, MOUNTED ON FRAME , FLOORSPACE 1.8X0.8 M, TOTAL HEIGHT 1.6 M, WEIGHT 560 KGBLOWERSBLOWERS > BLOWERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-waterjet - cutting machine, year 2017 as new
milling spindle, 2 heads, changing tables

3,800 bar - for cutting foams, plastics, textile, leather, cardboard, etc.

make: expert systems technology / thyssen uhde
type: cutexpert variojet
year of constr.: 2017

work area: 2,000 x 1.600 mm
max material thickness: 100 mm
rapid traverse max: 60 m / min
cutting nozzle diameter: 0.08 - 0.20 mm high pressure pump
make: uhde thyssenkrupp
type: hps 4022
pressure max: 3,800 bar
power: 22 kw

milling spindle
make: jã¤ger
maximum speed: 30,000 rpm

equipment / options:
-2 heads, 1 x with a milling spindle
-changing tables
-tables designed with va honeycomb elements
-including bagging filter
-including mobile compressor (metabo)
--program controlled height adjustment
-dxf import module
-nesting software module
-software module material database

footprint approximately: b = approx. 9 x 4 m, weight: 3500 kg

condition:
almost as good as new machine, comes from insolventem operation. 
delivered 10/2017, only about a year in operation.

price:
new price = (without installation) 232,000,-â?¬
requirement, net, from location north rhine-westphalia / germany
 WATERJET - CUTTING MACHINE, YEAR 2017 AS NEW MILLING SPINDLE, 2 HEADS, CHANGING TABLES 3,800 BAR - FOR CUTTING FOAMS, PLASTICS, TEXTILE, LEATHER, CARDBOARD, ETC. MAKE: EXPERT SYSTEMS TECHNOLOGY / THYSSEN UHDE TYPE: CUTEXPERT VARIOJET YEAR OF CONSTR.: 2017 WORK AREA: 2,000 X 1.600 MM MAX MATERIAL THICKNESS: 100 MM RAPID TRAVERSE MAX: 60 M / MIN CUTTING NOZZLE DIAMETER: 0.08 - 0.20 MM HIGH PRESSURE PUMP MAKE: UHDE THYSSENKRUPP TYPE: HPS 4022 PRESSURE MAX: 3,800 BAR POWER: 22 KW MILLING SPINDLE MAKE: JäGER MAXIMUM SPEED: 30,000 RPM EQUIPMENT / OPTIONS: -2 HEADS, 1 X WITH A MILLING SPINDLE -CHANGING TABLES -TABLES DESIGNED WITH VA HONEYCOMB ELEMENTS -INCLUDING BAGGING FILTER -INCLUDING MOBILE COMPRESSOR (METABO) --PROGRAM CONTROLLED HEIGHT ADJUSTMENT -DXF IMPORT MODULE -NESTING SOFTWARE MODULE -SOFTWARE MODULE MATERIAL DATABASE FOOTPRINT APPROXIMATELY: B = APPROX. 9 X 4 M, WEIGHT: 3500 KG CONDITION: ALMOST AS GOOD AS NEW MACHINE, COMES FROM INSOLVENTEM OPERATION. DELIVERED 10/2017, ONLY ABOUT A YEAR IN OPERATION. PRICE: NEW PRICE = (WITHOUT INSTALLATION) 232,000,-Â?¬ REQUIREMENT, NET, FROM LOCATION NORTH RHINE-WESTPHALIA / GERMANY
Vendedor: 5m+ GmbH
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine 4-side sealing p60xl<br><br>vertical packaging machine, full stainless steel construction (ss304), servo-driven film transport, plc with touch screen interface for easy operation, synchronisation for film feed system and date printer, eye-mark sensor for registration film, one-piece bag former for quick change. <br><br>- specifications: bag length: max. 380mm | bag width: 120-280mm | max. speed of the machine in neutral: 60 cycles/minute | power: 220v, 4.0kw | compressed air: 0,40m³, 6bar | weight (net/gross): 650/730kg.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE 4-SIDE SEALING P60XL

VERTICAL PACKAGING MACHINE, FULL STAINLESS STEEL CONSTRUCTION (SS304), SERVO-DRIVEN FILM TRANSPORT, PLC WITH TOUCH SCREEN INTERFACE FOR EASY OPERATION, SYNCHRONISATION FOR FILM FEED SYSTEM AND DATE PRINTER, EYE-MARK SENSOR FOR REGISTRATION FILM, ONE-PIECE BAG FORMER FOR QUICK CHANGE.

- SPECIFICATIONS: BAG LENGTH: MAX. 380MM | BAG WIDTH: 120-280MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | POWER: 220V, 4.0KW | COMPRESSED AIR: 0,40M³, 6BAR | WEIGHT (NET/GROSS): 650/730KG.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-waterjet - cutting machine, year 2017 as new
milling spindle, 2 heads, changing tables

3,800 bar - for cutting foams, plastics, textile, leather, cardboard, etc.

make: expert systems technology / thyssen uhde
type: cutexpert variojet
year of constr.: 2017

work area: 2,000 x 1.600 mm
max material thickness: 100 mm
rapid traverse max: 60 m / min
cutting nozzle diameter: 0.08 - 0.20 mm high pressure pump
make: uhde thyssenkrupp
type: hps 4022
pressure max: 3,800 bar
power: 22 kw

milling spindle
make: jã¤ger
maximum speed: 30,000 rpm

equipment / options:
-2 heads, 1 x with a milling spindle
-changing tables
-tables designed with va honeycomb elements
-including bagging filter
-including mobile compressor (metabo)
--program controlled height adjustment
-dxf import module
-nesting software module
-software module material database

footprint approximately: b = approx. 9 x 4 m, weight: 3500 kg

condition:
almost as good as new machine, comes from insolventem operation. 
delivered 10/2017, only about a year in operation.

price:
new price = (without installation) 232,000,-â?¬
requirement, net, from location north rhine-westphalia / germany
 WATERJET - CUTTING MACHINE, YEAR 2017 AS NEW MILLING SPINDLE, 2 HEADS, CHANGING TABLES 3,800 BAR - FOR CUTTING FOAMS, PLASTICS, TEXTILE, LEATHER, CARDBOARD, ETC. MAKE: EXPERT SYSTEMS TECHNOLOGY / THYSSEN UHDE TYPE: CUTEXPERT VARIOJET YEAR OF CONSTR.: 2017 WORK AREA: 2,000 X 1.600 MM MAX MATERIAL THICKNESS: 100 MM RAPID TRAVERSE MAX: 60 M / MIN CUTTING NOZZLE DIAMETER: 0.08 - 0.20 MM HIGH PRESSURE PUMP MAKE: UHDE THYSSENKRUPP TYPE: HPS 4022 PRESSURE MAX: 3,800 BAR POWER: 22 KW MILLING SPINDLE MAKE: J&ATILDE;&CURREN;GER MAXIMUM SPEED: 30,000 RPM EQUIPMENT / OPTIONS: -2 HEADS, 1 X WITH A MILLING SPINDLE -CHANGING TABLES -TABLES DESIGNED WITH VA HONEYCOMB ELEMENTS -INCLUDING BAGGING FILTER -INCLUDING MOBILE COMPRESSOR (METABO) --PROGRAM CONTROLLED HEIGHT ADJUSTMENT -DXF IMPORT MODULE -NESTING SOFTWARE MODULE -SOFTWARE MODULE MATERIAL DATABASE FOOTPRINT APPROXIMATELY: B = APPROX. 9 X 4 M, WEIGHT: 3500 KG CONDITION: ALMOST AS GOOD AS NEW MACHINE, COMES FROM INSOLVENTEM OPERATION. DELIVERED 10/2017, ONLY ABOUT A YEAR IN OPERATION. PRICE: NEW PRICE = (WITHOUT INSTALLATION) 232,000,-&ACIRC;?&NOT; REQUIREMENT, NET, FROM LOCATION NORTH RHINE-WESTPHALIA / GERMANY
Vendedor: 5m+ GmbH
Año de construcción: usado
Precio: 3.690 €
Ubicación: Land-amtec shrinktunnel-pof-l pro-version<br><br>shrink tunnel for middle sized products, pro-version for max. evenly temperature, ideal to be combined with amtec maxishrink w20l pro-version and speed shrink w30l pro-version. suitable for polyolefin films. adjustable speed and temperature. - technical specifications: 380v, 14kw | speed: 0-30m/min | temperature: up to 175°c | max. product dimensions (mm): w370xh230 | machine dimensions (mm): l1200xw670xh1290 | weight (net/gross): ca. 250/300kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINKTUNNEL-POF-L PRO-VERSION

SHRINK TUNNEL FOR MIDDLE SIZED PRODUCTS, PRO-VERSION FOR MAX. EVENLY TEMPERATURE, IDEAL TO BE COMBINED WITH AMTEC MAXISHRINK W20L PRO-VERSION AND SPEED SHRINK W30L PRO-VERSION. SUITABLE FOR POLYOLEFIN FILMS. ADJUSTABLE SPEED AND TEMPERATURE. - TECHNICAL SPECIFICATIONS: 380V, 14KW | SPEED: 0-30M/MIN | TEMPERATURE: UP TO 175°C | MAX. PRODUCT DIMENSIONS (MM): W370XH230 | MACHINE DIMENSIONS (MM): L1200XW670XH1290 | WEIGHT (NET/GROSS): CA. 250/300KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-technical data:
-feed infinitely variable 18 - 24 m / min.
-working height 950 mm
-minimum working width:
-55 mm workpiece thickness 22 mm
-100 mm workpiece thickness 60 mm
(depending on the length of the workpiece)
-workpiece projection 30 mm
-workpiece thickness 12-60 mm
-edge material strip max 0,4-20 mm
-edge cross-section strips up to 900 mm2 cross-section
-edge material role 0.3-3 mm
-cross-cutting of the edges roll up 135 mm2 cross-section
-roll diameter of 900 mm
-soil conditions must comply with the foundation plan

facilities:
-trimming unit, 2 motors 3 kw with noise protection
-workpiece preheating
-veleimteil a20, consisting of qa34 melt adhesive unit, magazine, role disconnecting device, pressure zone c, noise protection and end trimming unit hl83
-feeder 2 rolls, folded
-counterpressure roller for narrow parts
-workpiece support in scissor design with roll coating, max 1000 mm extendable, with extension
-stepless shaft edge thickness for the auto. adjustment of the pressure zone
-anti-caking agent unit
-roller changing device 2 x 3.5 mm
-pneumatic adjustment compound miter saw bevel / straight
-milling unit 1 kw, pneum.. adjustable
-form unit fk13, automatic
-adjustment of agggregattraeger continuously for fk device
-universal milling unit, 4 kw, controlled
-multi for plasters in direction
-for plasters in direction glue joint
-chamfer/radiusschleifagggregat below and above (ps 41/42), automatically adjustable
-buffing unit up and down
-nc 21 control 
 TECHNICAL DATA: -FEED INFINITELY VARIABLE 18 - 24 M / MIN. -WORKING HEIGHT 950 MM -MINIMUM WORKING WIDTH: -55 MM WORKPIECE THICKNESS 22 MM -100 MM WORKPIECE THICKNESS 60 MM (DEPENDING ON THE LENGTH OF THE WORKPIECE) -WORKPIECE PROJECTION 30 MM -WORKPIECE THICKNESS 12-60 MM -EDGE MATERIAL STRIP MAX 0,4-20 MM -EDGE CROSS-SECTION STRIPS UP TO 900 MM2 CROSS-SECTION -EDGE MATERIAL ROLE 0.3-3 MM -CROSS-CUTTING OF THE EDGES ROLL UP 135 MM2 CROSS-SECTION -ROLL DIAMETER OF 900 MM -SOIL CONDITIONS MUST COMPLY WITH THE FOUNDATION PLAN FACILITIES: -TRIMMING UNIT, 2 MOTORS 3 KW WITH NOISE PROTECTION -WORKPIECE PREHEATING -VELEIMTEIL A20, CONSISTING OF QA34 MELT ADHESIVE UNIT, MAGAZINE, ROLE DISCONNECTING DEVICE, PRESSURE ZONE C, NOISE PROTECTION AND END TRIMMING UNIT HL83 -FEEDER 2 ROLLS, FOLDED -COUNTERPRESSURE ROLLER FOR NARROW PARTS -WORKPIECE SUPPORT IN SCISSOR DESIGN WITH ROLL COATING, MAX 1000 MM EXTENDABLE, WITH EXTENSION -STEPLESS SHAFT EDGE THICKNESS FOR THE AUTO. ADJUSTMENT OF THE PRESSURE ZONE -ANTI-CAKING AGENT UNIT -ROLLER CHANGING DEVICE 2 X 3.5 MM -PNEUMATIC ADJUSTMENT COMPOUND MITER SAW BEVEL / STRAIGHT -MILLING UNIT 1 KW, PNEUM.. ADJUSTABLE -FORM UNIT FK13, AUTOMATIC -ADJUSTMENT OF AGGGREGATTRAEGER CONTINUOUSLY FOR FK DEVICE -UNIVERSAL MILLING UNIT, 4 KW, CONTROLLED -MULTI FOR PLASTERS IN DIRECTION -FOR PLASTERS IN DIRECTION GLUE JOINT -CHAMFER/RADIUSSCHLEIFAGGGREGAT BELOW AND ABOVE (PS 41/42), AUTOMATICALLY ADJUSTABLE -BUFFING UNIT UP AND DOWN -NC 21 CONTROL
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-amtec flowwrap f150-2xl80gn - 1 rotary knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 480mm | 1 rotating knife | 220v, 2.8kw | no compressed air required | max. speed of the machine in neutral: 150 cycles/min | max. bag (not product) dimensions (mm): l(100-450)xw(50-210)xh(0-80) | machine dimensions (mm): l3990xw900xh1468 | weight (net/gross): 900/950kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F150-2XL80GN - 1 ROTARY KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 480MM | 1 ROTATING KNIFE | 220V, 2.8KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 150 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(100-450)XW(50-210)XH(0-80) | MACHINE DIMENSIONS (MM): L3990XW900XH1468 | WEIGHT (NET/GROSS): 900/950KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-microtec multi sensor scanner goldeneye-501

pre-owned microtec multi sensor scanner goldeneye-501 manufacturer: microtec type: goldeneye 501 year: 2011 condition: good, (used) commissioned description microtec multi sensor 501 goldeneye multisensor scanner for determining the quality of sawn timber in the inline transport scope: capping wood: spruce, pine length of the slat: 2000 mm - 6000 mm width of lamella: 45 mm - 190 mm thickness of the plate: 18 mm - 80 mm wood surface: rough (circular saw cut, clean surface) wood moisture: 8% - 18% wood temperature: up  to + 40 â° c maximum feed speed goldeneye: from 80 m / min. up to 150 m / min (depending on the cross-section) board gap in the scanner: á?³150mm ambient temperature: + 5 â° c up to + 35 â° c maximum relative humidity: á?¸80% rel. hum.	

system configuration: 3d laser image (4-sided) line laser (4-sided) point laser (4-sided) color image (4-sided) upgrade x-ray part recording of x-ray images with a resolution of 1, 0 mm x 2.2 mm 150 m / min feed cameras: digital c-mos ethernet high-performance came eras lighting: led lighting, laser the following functions are included: recording the error zones detected by the sensors plausibility control cutting optimization taking into account areas and quality-related error dimensions of 4 different qualities pass of the cutting lists on automatic (previously dimter 350 and 450) production statistics standard microtec software windows xp user interface three-dimensional illustration of the entire board graphic real time visualization of recognized detection of knots, cracks, bark inclusion, resin gall, pith, forest edge, damage to edges, blue, tan, parent - under proportionality to optimize computer board error transmission of measured data and the data of the errors of the board width, monitoring under proportionality strength compact and modaleres qualitã¤tsscanner system for wooden components aluminium/steel housing internal optoelectronics, sensors, cameras, laser, etc., are protected by custom-designed case against environmental influences. MICROTEC MULTI SENSOR SCANNER GOLDENEYE-501 PRE-OWNED MICROTEC MULTI SENSOR SCANNER GOLDENEYE-501 MANUFACTURER: MICROTEC TYPE: GOLDENEYE 501 YEAR: 2011 CONDITION: GOOD, (USED) COMMISSIONED DESCRIPTION MICROTEC MULTI SENSOR 501 GOLDENEYE MULTISENSOR SCANNER FOR DETERMINING THE QUALITY OF SAWN TIMBER IN THE INLINE TRANSPORT SCOPE: CAPPING WOOD: SPRUCE, PINE LENGTH OF THE SLAT: 2000 MM - 6000 MM WIDTH OF LAMELLA: 45 MM - 190 MM THICKNESS OF THE PLATE: 18 MM - 80 MM WOOD SURFACE: ROUGH (CIRCULAR SAW CUT, CLEAN SURFACE) WOOD MOISTURE: 8% - 18% WOOD TEMPERATURE: UP TO + 40 &ACIRC;&DEG; C MAXIMUM FEED SPEED GOLDENEYE: FROM 80 M / MIN. UP TO 150 M / MIN (DEPENDING ON THE CROSS-SECTION) BOARD GAP IN THE SCANNER: &AACUTE;?&SUP3;150MM AMBIENT TEMPERATURE: + 5 &ACIRC;&DEG; C UP TO + 35 &ACIRC;&DEG; C MAXIMUM RELATIVE HUMIDITY: &AACUTE;?&CEDIL;80% REL. HUM. SYSTEM CONFIGURATION: 3D LASER IMAGE (4-SIDED) LINE LASER (4-SIDED) POINT LASER (4-SIDED) COLOR IMAGE (4-SIDED) UPGRADE X-RAY PART RECORDING OF X-RAY IMAGES WITH A RESOLUTION OF 1, 0 MM X 2.2 MM 150 M / MIN FEED CAMERAS: DIGITAL C-MOS ETHERNET HIGH-PERFORMANCE CAME ERAS LIGHTING: LED LIGHTING, LASER THE FOLLOWING FUNCTIONS ARE INCLUDED: RECORDING THE ERROR ZONES DETECTED BY THE SENSORS PLAUSIBILITY CONTROL CUTTING OPTIMIZATION TAKING INTO ACCOUNT AREAS AND QUALITY-RELATED ERROR DIMENSIONS OF 4 DIFFERENT QUALITIES PASS OF THE CUTTING LISTS ON AUTOMATIC (PREVIOUSLY DIMTER 350 AND 450) PRODUCTION STATISTICS STANDARD MICROTEC SOFTWARE WINDOWS XP USER INTERFACE THREE-DIMENSIONAL ILLUSTRATION OF THE ENTIRE BOARD GRAPHIC REAL TIME VISUALIZATION OF RECOGNIZED DETECTION OF KNOTS, CRACKS, BARK INCLUSION, RESIN GALL, PITH, FOREST EDGE, DAMAGE TO EDGES, BLUE, TAN, PARENT - UNDER PROPORTIONALITY TO OPTIMIZE COMPUTER BOARD ERROR TRANSMISSION OF MEASURED DATA AND THE DATA OF THE ERRORS OF THE BOARD WIDTH, MONITORING UNDER PROPORTIONALITY STRENGTH COMPACT AND MODALERES QUALIT&ATILDE;&CURREN;TSSCANNER SYSTEM FOR WOODEN COMPONENTS ALUMINIUM/STEEL HOUSING INTERNAL OPTOELECTRONICS, SENSORS, CAMERAS, LASER, ETC., ARE PROTECTED BY CUSTOM-DESIGNED CASE AGAINST ENVIRONMENTAL INFLUENCES.
Vendedor: SN-InTec Ltd.& CO.KG
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine 4-side sealing p60l<br><br>vertical packaging machine, full stainless steel construction (ss304), servo-driven film transport, plc with touch screen interface for easy operation, synchronisation for film feed system and date printer, eye-mark sensor for registration film, one-piece bag former for quick change. <br><br>- specifications: bag length: max. 300mm | bag width: 100-240mm | max. speed of the machine in neutral: 60 cycles/minute | power: 220v, 3.5kw | compressed air: 0.35m³, 6bar | weight (net/gross): 550/620kg.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE 4-SIDE SEALING P60L

VERTICAL PACKAGING MACHINE, FULL STAINLESS STEEL CONSTRUCTION (SS304), SERVO-DRIVEN FILM TRANSPORT, PLC WITH TOUCH SCREEN INTERFACE FOR EASY OPERATION, SYNCHRONISATION FOR FILM FEED SYSTEM AND DATE PRINTER, EYE-MARK SENSOR FOR REGISTRATION FILM, ONE-PIECE BAG FORMER FOR QUICK CHANGE.

- SPECIFICATIONS: BAG LENGTH: MAX. 300MM | BAG WIDTH: 100-240MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | POWER: 220V, 3.5KW | COMPRESSED AIR: 0.35M³, 6BAR | WEIGHT (NET/GROSS): 550/620KG.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 2.050 €
Ubicación: Land-storage tank / beer tank/ pressure tank with cooling jacket 
in aisi 304 
operating pressure: 0,99 bar , test pressure: 1,7 bar

material:      		
v2a - aisi 304, 1.4301 

surface: 		
inside and outside 2b=iiic

top bottom:   	
with  pressure lid 390  mm	
			with 1 x  thread connection dn 50
			with 1 x overpressure valve
                                          with 1 x co² connection
			with 6 x  screws
                                          
cylinder tank:                
 with cooling jacket
		              with 1 x reinforcing rings for better pressure resistance
	
lower bottom:  	             
 with outlet dn 50 with butterfly valve
                                           on 4 stable feets
			can be moved from all sides with a forklift / truck pallet

diamteter:
1000 mm                
total height:
1950 mm    
cyl. height               
1100 mm          
weight:
165 kg
  STORAGE TANK / BEER TANK/ PRESSURE TANK WITH COOLING JACKET IN AISI 304 OPERATING PRESSURE: 0,99 BAR , TEST PRESSURE: 1,7 BAR MATERIAL: V2A - AISI 304, 1.4301 SURFACE: INSIDE AND OUTSIDE 2B=IIIC TOP BOTTOM: WITH PRESSURE LID 390 MM WITH 1 X THREAD CONNECTION DN 50 WITH 1 X OVERPRESSURE VALVE WITH 1 X CO² CONNECTION WITH 6 X SCREWS CYLINDER TANK: WITH COOLING JACKET WITH 1 X REINFORCING RINGS FOR BETTER PRESSURE RESISTANCE LOWER BOTTOM: WITH OUTLET DN 50 WITH BUTTERFLY VALVE ON 4 STABLE FEETS CAN BE MOVED FROM ALL SIDES WITH A FORKLIFT / TRUCK PALLET DIAMTETER: 1000 MM TOTAL HEIGHT: 1950 MM CYL. HEIGHT 1100 MM WEIGHT: 165 KG
Vendedor: Eurolux GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-amtec shrinktunnel-pof-xxl pro-version<br><br>shrink tunnel for large sized products, pro-version for max. evenly temperature, ideal to be combined with amtec maxishrink w20xxl pro-version. suitable for polyolefin films. adjustable speed and temperature. - technical specifications: 380v, 30kw | speed: 0-30m/min | temperature: up to 175°c | max. product dimensions (mm): w700xh300 | machine dimensions (mm): l2100xw950xh1315 | weight (net/gross): ca. 350/400kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINKTUNNEL-POF-XXL PRO-VERSION

SHRINK TUNNEL FOR LARGE SIZED PRODUCTS, PRO-VERSION FOR MAX. EVENLY TEMPERATURE, IDEAL TO BE COMBINED WITH AMTEC MAXISHRINK W20XXL PRO-VERSION. SUITABLE FOR POLYOLEFIN FILMS. ADJUSTABLE SPEED AND TEMPERATURE. - TECHNICAL SPECIFICATIONS: 380V, 30KW | SPEED: 0-30M/MIN | TEMPERATURE: UP TO 175°C | MAX. PRODUCT DIMENSIONS (MM): W700XH300 | MACHINE DIMENSIONS (MM): L2100XW950XH1315 | WEIGHT (NET/GROSS): CA. 350/400KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-the line connecting the thrust miniwczepy grecon dimter ultra tt

-serviced by weinig service

-year of production 2005
-in stock

technical parameters:

-the length of the input parts min/max 200-1000 mm
-average length input 450 mm

-the thickness of the elements of min/max 20-80 mm

-width of the min/max 40-205 mm

-cross-section of timber 38 × 60 mm
-the length of the starting components min/max 3000-6100 mm
-the average length of the output elements 5500 mm
-length of 10-11 mm fingerjointing
-adhesive pvac

-the type of wood-soft, hard
-wood moisture content 8-12%

-conveyor belt package material

-the width of the package 600 mm

-motor 1.1 kw

-wczepiarko-milling machine with rotary table

-the width of the package 600 mm
-50 mm spindle diameter
-average milling tool 250 mm
-250 mm diameter blade cutting
-cutting height 205 mm max

-cutting saw motor 11.5 kw

– motor trimming 22 kw

-electronic scoring unit up/down dovetailing machines horizontal

-gluing station glue system flankenjet

-belt conveyor type material package

-width of 600 mm,
– motor 1.1 kw

-transfer station to the press-loading

-width of 600 mm
– motor 5.4 kw

-the position of the automatic feed items to the press

– motor 2.2 kw
-the feed shaft carrying the lamella type ve 205
-feeding speed 1.6 m/s bei 50 hz
– motor 4.4 kw

press to connect longitudinal conti-and with automatic loading and trimming saw

-pressing the min/max length 3000/6100 mm
-force max. sc 120
-number of cycles of working max. 8 cycles/min
-hydraulic drive q3
-width of the min/max 40/205 mm
-weight parts min/max 20/80 mm
-450 mm the diameter of the saw
-blade motor 2.2 kw THE LINE CONNECTING THE THRUST MINIWCZEPY GRECON DIMTER ULTRA TT -SERVICED BY WEINIG SERVICE -YEAR OF PRODUCTION 2005 -IN STOCK TECHNICAL PARAMETERS: -THE LENGTH OF THE INPUT PARTS MIN/MAX 200-1000 MM -AVERAGE LENGTH INPUT 450 MM -THE THICKNESS OF THE ELEMENTS OF MIN/MAX 20-80 MM -WIDTH OF THE MIN/MAX 40-205 MM -CROSS-SECTION OF TIMBER 38 × 60 MM -THE LENGTH OF THE STARTING COMPONENTS MIN/MAX 3000-6100 MM -THE AVERAGE LENGTH OF THE OUTPUT ELEMENTS 5500 MM -LENGTH OF 10-11 MM FINGERJOINTING -ADHESIVE PVAC -THE TYPE OF WOOD-SOFT, HARD -WOOD MOISTURE CONTENT 8-12% -CONVEYOR BELT PACKAGE MATERIAL -THE WIDTH OF THE PACKAGE 600 MM -MOTOR 1.1 KW -WCZEPIARKO-MILLING MACHINE WITH ROTARY TABLE -THE WIDTH OF THE PACKAGE 600 MM -50 MM SPINDLE DIAMETER -AVERAGE MILLING TOOL 250 MM -250 MM DIAMETER BLADE CUTTING -CUTTING HEIGHT 205 MM MAX -CUTTING SAW MOTOR 11.5 KW – MOTOR TRIMMING 22 KW -ELECTRONIC SCORING UNIT UP/DOWN DOVETAILING MACHINES HORIZONTAL -GLUING STATION GLUE SYSTEM FLANKENJET -BELT CONVEYOR TYPE MATERIAL PACKAGE -WIDTH OF 600 MM, – MOTOR 1.1 KW -TRANSFER STATION TO THE PRESS-LOADING -WIDTH OF 600 MM – MOTOR 5.4 KW -THE POSITION OF THE AUTOMATIC FEED ITEMS TO THE PRESS – MOTOR 2.2 KW -THE FEED SHAFT CARRYING THE LAMELLA TYPE VE 205 -FEEDING SPEED 1.6 M/S BEI 50 HZ – MOTOR 4.4 KW PRESS TO CONNECT LONGITUDINAL CONTI-AND WITH AUTOMATIC LOADING AND TRIMMING SAW -PRESSING THE MIN/MAX LENGTH 3000/6100 MM -FORCE MAX. SC 120 -NUMBER OF CYCLES OF WORKING MAX. 8 CYCLES/MIN -HYDRAULIC DRIVE Q3 -WIDTH OF THE MIN/MAX 40/205 MM -WEIGHT PARTS MIN/MAX 20/80 MM -450 MM THE DIAMETER OF THE SAW -BLADE MOTOR 2.2 KW
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-amtec flowwrap f40-2xl110gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 600mm | 1 pendular knife | 220v, 3.6kw | no compressed air required | max. speed of the machine in neutral: 40 cycles/min | max. bag (not product) dimensions (mm): l(120-450)xw(50-200)xh(10-110) | machine dimensions (mm): l4380xw970xh1500 | weight (net/gross): 1160/1260kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F40-2XL110GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 600MM | 1 PENDULAR KNIFE | 220V, 3.6KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 40 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(120-450)XW(50-200)XH(10-110) | MACHINE DIMENSIONS (MM): L4380XW970XH1500 | WEIGHT (NET/GROSS): 1160/1260KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-
press dimter profipress t 5500 hf high frequency unit

line for gluing wood dimter type profipress t 5500 hf

-serviced by weinig service

-in stock
-after reviewing the technical
-very good condition
-production of germany
-year of manufacture: 2009

technical parameters:

-the length of the input elements of the min/max 900-5500 mm
-width lamelli 40-120 mm
-thickness of the 16-60 mm
-the width of the panels 250-1350 mm
-the dimension of the cut on the pile lateral 250-1350 mm
-the average dimension of 1000 mm
-pressure min/max 54-352 kn
-the width of the loading of the press in 1 cycle max. 1350 mm
– max. loading area of the press in 1 cycle 7.15 m²
-hydraulic pressure max. 260 bar
– type of wood hard
humidity of wood 8-12%
is a kind of glue 1-komponenten leim

line configuration

-automatic loading station and gluing integrated with profipress

-integrated camera for character recognition of chalk-press profi press t 5500-length/width glued elements 5500 × 1350 mm
-automatic adjustment of pressure
-hydraulic integrated
-control cabinet integrated control
-heat, high-frequency currents press ab
hf generator factory. cavallo 50 kw, generator pradow ab

the equipment package for gluing hardwood

-the thickness of the wood to 60 mm

-belt conveyor transporting for the press-dobiór plate with the press

-length of transporter 2700 mm

-automatic saw cutting width

– motor 13.5 kw, Ø 400 mm

-cross-cut saw endless glued panels on the desired width

-maximum plate width 1350 mm
-angle conveyor of disc storage station

-collection of plates and onward transport panels trimmed in width,
-length of transporter 1800 mm
-pusher to longitudinal saws mobile log automatically

-automatic saw cutting length

– motor 13.5 kw, Ø 450 mm
-slitting saw glued panels on the desired length of the final
-maximum plate width 1350 mm

roller conveyor on the output
-table reception of ready-cut plates and onward transportation to manual receive

-the width of the transporter 1350 mm PRESS DIMTER PROFIPRESS T 5500 HF HIGH FREQUENCY UNIT LINE FOR GLUING WOOD DIMTER TYPE PROFIPRESS T 5500 HF -SERVICED BY WEINIG SERVICE -IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION -PRODUCTION OF GERMANY -YEAR OF MANUFACTURE: 2009 TECHNICAL PARAMETERS: -THE LENGTH OF THE INPUT ELEMENTS OF THE MIN/MAX 900-5500 MM -WIDTH LAMELLI 40-120 MM -THICKNESS OF THE 16-60 MM -THE WIDTH OF THE PANELS 250-1350 MM -THE DIMENSION OF THE CUT ON THE PILE LATERAL 250-1350 MM -THE AVERAGE DIMENSION OF 1000 MM -PRESSURE MIN/MAX 54-352 KN -THE WIDTH OF THE LOADING OF THE PRESS IN 1 CYCLE MAX. 1350 MM – MAX. LOADING AREA OF THE PRESS IN 1 CYCLE 7.15 M² -HYDRAULIC PRESSURE MAX. 260 BAR – TYPE OF WOOD HARD HUMIDITY OF WOOD 8-12% IS A KIND OF GLUE 1-KOMPONENTEN LEIM LINE CONFIGURATION -AUTOMATIC LOADING STATION AND GLUING INTEGRATED WITH PROFIPRESS -INTEGRATED CAMERA FOR CHARACTER RECOGNITION OF CHALK-PRESS PROFI PRESS T 5500-LENGTH/WIDTH GLUED ELEMENTS 5500 × 1350 MM -AUTOMATIC ADJUSTMENT OF PRESSURE -HYDRAULIC INTEGRATED -CONTROL CABINET INTEGRATED CONTROL -HEAT, HIGH-FREQUENCY CURRENTS PRESS AB HF GENERATOR FACTORY. CAVALLO 50 KW, GENERATOR PRADOW AB THE EQUIPMENT PACKAGE FOR GLUING HARDWOOD -THE THICKNESS OF THE WOOD TO 60 MM -BELT CONVEYOR TRANSPORTING FOR THE PRESS-DOBIóR PLATE WITH THE PRESS -LENGTH OF TRANSPORTER 2700 MM -AUTOMATIC SAW CUTTING WIDTH – MOTOR 13.5 KW, Ø 400 MM -CROSS-CUT SAW ENDLESS GLUED PANELS ON THE DESIRED WIDTH -MAXIMUM PLATE WIDTH 1350 MM -ANGLE CONVEYOR OF DISC STORAGE STATION -COLLECTION OF PLATES AND ONWARD TRANSPORT PANELS TRIMMED IN WIDTH, -LENGTH OF TRANSPORTER 1800 MM -PUSHER TO LONGITUDINAL SAWS MOBILE LOG AUTOMATICALLY -AUTOMATIC SAW CUTTING LENGTH – MOTOR 13.5 KW, Ø 450 MM -SLITTING SAW GLUED PANELS ON THE DESIRED LENGTH OF THE FINAL -MAXIMUM PLATE WIDTH 1350 MM ROLLER CONVEYOR ON THE OUTPUT -TABLE RECEPTION OF READY-CUT PLATES AND ONWARD TRANSPORTATION TO MANUAL RECEIVE -THE WIDTH OF THE TRANSPORTER 1350 MM
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine tetraeder and pillow pack tp50 - including 0.5l/10head scale<br><br>pro-version high performance vertical packaging machine for tetraeder and pillow bags including 0.5l/10-head-scale. innovative rotation sealing system for triangle bag. omron plc, interactive 9.7-lcd touch panel display, schneider and omron electronic components, airtac pneumatics and omron pid temperature control, servomotor film pulling, pneumatic sealing unit. <br><br>- specifications: vertical and horizontal sealing width: 10mm | cutting way: searate cutting | stainless steel (ss304) | 10-head-0.5-liter-multiscale | weighing range: 5-500g | accurracy: 0.1-2g | max. speed of the machine in neutral: (only weigher, not complete system): 60 cycles/minute | 9.7 touchscreen | 100 program setting | bag sizes: l(50-230)xw(60-160)mm | max. speed of the machine in neutral: 50 cycles/minute | 220v/3.5kw | 6bar, 0.3m³/min | machine dimensions: l1100xw1400xh2220mm | weight: 650kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE TETRAEDER AND PILLOW PACK TP50 - INCLUDING 0.5L/10HEAD SCALE

PRO-VERSION HIGH PERFORMANCE VERTICAL PACKAGING MACHINE FOR TETRAEDER AND PILLOW BAGS INCLUDING 0.5L/10-HEAD-SCALE. INNOVATIVE ROTATION SEALING SYSTEM FOR TRIANGLE BAG. OMRON PLC, INTERACTIVE 9.7-LCD TOUCH PANEL DISPLAY, SCHNEIDER AND OMRON ELECTRONIC COMPONENTS, AIRTAC PNEUMATICS AND OMRON PID TEMPERATURE CONTROL, SERVOMOTOR FILM PULLING, PNEUMATIC SEALING UNIT.

- SPECIFICATIONS: VERTICAL AND HORIZONTAL SEALING WIDTH: 10MM | CUTTING WAY: SEARATE CUTTING | STAINLESS STEEL (SS304) | 10-HEAD-0.5-LITER-MULTISCALE | WEIGHING RANGE: 5-500G | ACCURRACY: 0.1-2G | MAX. SPEED OF THE MACHINE IN NEUTRAL: (ONLY WEIGHER, NOT COMPLETE SYSTEM): 60 CYCLES/MINUTE | 9.7 TOUCHSCREEN | 100 PROGRAM SETTING | BAG SIZES: L(50-230)XW(60-160)MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 50 CYCLES/MINUTE | 220V/3.5KW | 6BAR, 0.3M³/MIN | MACHINE DIMENSIONS: L1100XW1400XH2220MM | WEIGHT: 650KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-working area
chuck diameter	mm	315/400
turning diameter 	mm	340
swing max.	mm	420
turning height	mm	160
travel – x-axis 	mm	850
travel – z-axis	mm	315
rapid motion – x-axis 	m/min	45
rapid motion – z-axis 	m/min	30
c-axis
rotation speed	u/min	0 – 100 
positioning precision	grad	+/- 0,01°
progammable increment	grad	0,001°
main spindle
spindle flange – din 55026 	no.	a 11
spindle diameter in front bearing	mm	160
spindle rotation speed max.	rpm	3.400
main drive
ac-asynchronous motor, drive power at 44% duty cycle	kw	58
power requirement max.	kw	58
maximum power from spindle speed	rpm	900
torque at 44% duty cycle	nm	620
torque max.	nm	620
holding torque continuous operation
nm	480
disc turret head with driven tools
turret head	station	12
shaft diameter din 69880 vdi	mm	50
spindle rotation speed max.	rpm	6.000
torque max. at  10% duty cycle	nm	60
torque max. at  25% duty cycle	nm	50
torque max. at 100% duty cycle	nm	30
electrics
electrics – voltage / frequency	v/hz	400/50
control voltage – direct current	v	24
control voltage – alternating current	v	230
supply protection	a	100
machine dimension and weight
machine weight approx.	kgs	10.000
dimension of the machine	mm	3.800 x 1.800
height of the machine	mm	3.500
portal loading system and workpiece storage length	mm	4.200
space requirement – with the machine, portal 
loading system and workpiece storage length	mm	7.950 x 6.100

accessories and further information:

cnc-control system siemens 840d
workpiece measurement device
tool life monitoring - replacement tool monitoring
workpiece storage and transport system
3-jaw power chuck 400 mm diamter, manufacturer smw autoblock
workpiece transport through the machine by shuttle, each with a separate prism 
for raw material and machined workpieces
workpiece diameter max. 340 mm, workpiece height max. 160 mm
the workpiece transport takes place via 2 transport prisms
4 pieces of pallets for feeding and removal the parts (2 x 2)
workpiece transport system in oval design, 
possible storage capacity with workpiece diameter max. 440 mm, approx. 
12 workpieces, workpiece height max. 160 mm
conveyed portal between the machine and workpiece transport system
with 2 nc controlled axes and one reversing gripper for second side machining 
operations:
length:	4.200 mm
height:	  600 mm
gripper rotatable by 180° for 2 sides machining
coolant attachment, coolant tank 500 l with paper belt filter, coolant pump 
output 80 l/min at 8 bar
the automation is designed for the use of a second machine
dast and oilmist extraction system, make losma, extraction capacity 
approx..1.000 – 1.200 cbm/h
chip conveyor
  WORKING AREA CHUCK DIAMETER MM 315/400 TURNING DIAMETER MM 340 SWING MAX. MM 420 TURNING HEIGHT MM 160 TRAVEL – X-AXIS MM 850 TRAVEL – Z-AXIS MM 315 RAPID MOTION – X-AXIS M/MIN 45 RAPID MOTION – Z-AXIS M/MIN 30 C-AXIS ROTATION SPEED U/MIN 0 – 100 POSITIONING PRECISION GRAD +/- 0,01° PROGAMMABLE INCREMENT GRAD 0,001° MAIN SPINDLE SPINDLE FLANGE – DIN 55026 NO. A 11 SPINDLE DIAMETER IN FRONT BEARING MM 160 SPINDLE ROTATION SPEED MAX. RPM 3.400 MAIN DRIVE AC-ASYNCHRONOUS MOTOR, DRIVE POWER AT 44% DUTY CYCLE KW 58 POWER REQUIREMENT MAX. KW 58 MAXIMUM POWER FROM SPINDLE SPEED RPM 900 TORQUE AT 44% DUTY CYCLE NM 620 TORQUE MAX. NM 620 HOLDING TORQUE CONTINUOUS OPERATION NM 480 DISC TURRET HEAD WITH DRIVEN TOOLS TURRET HEAD STATION 12 SHAFT DIAMETER DIN 69880 VDI MM 50 SPINDLE ROTATION SPEED MAX. RPM 6.000 TORQUE MAX. AT 10% DUTY CYCLE NM 60 TORQUE MAX. AT 25% DUTY CYCLE NM 50 TORQUE MAX. AT 100% DUTY CYCLE NM 30 ELECTRICS ELECTRICS – VOLTAGE / FREQUENCY V/HZ 400/50 CONTROL VOLTAGE – DIRECT CURRENT V 24 CONTROL VOLTAGE – ALTERNATING CURRENT V 230 SUPPLY PROTECTION A 100 MACHINE DIMENSION AND WEIGHT MACHINE WEIGHT APPROX. KGS 10.000 DIMENSION OF THE MACHINE MM 3.800 X 1.800 HEIGHT OF THE MACHINE MM 3.500 PORTAL LOADING SYSTEM AND WORKPIECE STORAGE LENGTH MM 4.200 SPACE REQUIREMENT – WITH THE MACHINE, PORTAL LOADING SYSTEM AND WORKPIECE STORAGE LENGTH MM 7.950 X 6.100 ACCESSORIES AND FURTHER INFORMATION: CNC-CONTROL SYSTEM SIEMENS 840D WORKPIECE MEASUREMENT DEVICE TOOL LIFE MONITORING - REPLACEMENT TOOL MONITORING WORKPIECE STORAGE AND TRANSPORT SYSTEM 3-JAW POWER CHUCK 400 MM DIAMTER, MANUFACTURER SMW AUTOBLOCK WORKPIECE TRANSPORT THROUGH THE MACHINE BY SHUTTLE, EACH WITH A SEPARATE PRISM FOR RAW MATERIAL AND MACHINED WORKPIECES WORKPIECE DIAMETER MAX. 340 MM, WORKPIECE HEIGHT MAX. 160 MM THE WORKPIECE TRANSPORT TAKES PLACE VIA 2 TRANSPORT PRISMS 4 PIECES OF PALLETS FOR FEEDING AND REMOVAL THE PARTS (2 X 2) WORKPIECE TRANSPORT SYSTEM IN OVAL DESIGN, POSSIBLE STORAGE CAPACITY WITH WORKPIECE DIAMETER MAX. 440 MM, APPROX. 12 WORKPIECES, WORKPIECE HEIGHT MAX. 160 MM CONVEYED PORTAL BETWEEN THE MACHINE AND WORKPIECE TRANSPORT SYSTEM WITH 2 NC CONTROLLED AXES AND ONE REVERSING GRIPPER FOR SECOND SIDE MACHINING OPERATIONS: LENGTH: 4.200 MM HEIGHT: 600 MM GRIPPER ROTATABLE BY 180° FOR 2 SIDES MACHINING COOLANT ATTACHMENT, COOLANT TANK 500 L WITH PAPER BELT FILTER, COOLANT PUMP OUTPUT 80 L/MIN AT 8 BAR THE AUTOMATION IS DESIGNED FOR THE USE OF A SECOND MACHINE DAST AND OILMIST EXTRACTION SYSTEM, MAKE LOSMA, EXTRACTION CAPACITY APPROX..1.000 – 1.200 CBM/H CHIP CONVEYOR
Vendedor: HBN Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-amtec shrinktunnel-pof-xxxl (high speed)<br><br>shrinktunnel suitable to be combined with amtec shrink wrapper sideshrink w60xxxl. high speed shrinking with 0-20 m/min for pof (polyolefin) film. <br><br>- specifications: max. packaging size: l1300xw700xh250mm | tunnel size: l1500xw800xh300mm | machine dimensions: l1800xw1290xh1300mm | max. 20kw, 380v | weight: 550kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINKTUNNEL-POF-XXXL (HIGH SPEED)

SHRINKTUNNEL SUITABLE TO BE COMBINED WITH AMTEC SHRINK WRAPPER SIDESHRINK W60XXXL. HIGH SPEED SHRINKING WITH 0-20 M/MIN FOR POF (POLYOLEFIN) FILM.

- SPECIFICATIONS: MAX. PACKAGING SIZE: L1300XW700XH250MM | TUNNEL SIZE: L1500XW800XH300MM | MACHINE DIMENSIONS: L1800XW1290XH1300MM | MAX. 20KW, 380V | WEIGHT: 550KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-execution: unit type: stationary version: container technical data motor: motor manufacturers: mtu engine type: 18 v 2000 g motor no.: 539 100 cooling: water-cooled starting: electric 24 v dc speed: 1500 rpm fuel: fuel oil en 590 technical  data generator: generator manufacturer: rwe piller gmbh generator type: semi-detached 102 80/5 gene. no.: 9503008214/2004 generator power: 1100 kva voltage: 400 / 231 volts power factor: cos. -phi 0.8 speed: 1500 rpm switchgear: execution: automatic start functions: emergency operation switch: generator switch 3 pin delivery: fitted tank: execution: internertank, stand tank litres: 950 use: state: get well n built: 2005 delivery: immediately verl operating hours: 416 location: verl - germany stock number: 1094 
 EXECUTION: UNIT TYPE: STATIONARY VERSION: CONTAINER TECHNICAL DATA MOTOR: MOTOR MANUFACTURERS: MTU ENGINE TYPE: 18 V 2000 G MOTOR NO.: 539 100 COOLING: WATER-COOLED STARTING: ELECTRIC 24 V DC SPEED: 1500 RPM FUEL: FUEL OIL EN 590 TECHNICAL DATA GENERATOR: GENERATOR MANUFACTURER: RWE PILLER GMBH GENERATOR TYPE: SEMI-DETACHED 102 80/5 GENE. NO.: 9503008214/2004 GENERATOR POWER: 1100 KVA VOLTAGE: 400 / 231 VOLTS POWER FACTOR: COS. -PHI 0.8 SPEED: 1500 RPM SWITCHGEAR: EXECUTION: AUTOMATIC START FUNCTIONS: EMERGENCY OPERATION SWITCH: GENERATOR SWITCH 3 PIN DELIVERY: FITTED TANK: EXECUTION: INTERNERTANK, STAND TANK LITRES: 950 USE: STATE: GET WELL N BUILT: 2005 DELIVERY: IMMEDIATELY VERL OPERATING HOURS: 416 LOCATION: VERL - GERMANY STOCK NUMBER: 1094
Vendedor: Aggregatebau WA Notstromtechnik GmbH
Año de construcción: usado
Ubicación: Land-amtec flowwrap f80-xl80gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 450mm | 1 pendular knife | 220v, 3.2kw | no compressed air required | max. speed of the machine in neutral: 80 cycles/min | max. bag (not product): dimensions (mm): l(120-450)xw(50-160)xh(10-80) | machine dimensions (mm): l4380xw870xh1500 | weight (net/gross): 960/1060kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F80-XL80GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 450MM | 1 PENDULAR KNIFE | 220V, 3.2KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 80 CYCLES/MIN | MAX. BAG (NOT PRODUCT): DIMENSIONS (MM): L(120-450)XW(50-160)XH(10-80) | MACHINE DIMENSIONS (MM): L4380XW870XH1500 | WEIGHT (NET/GROSS): 960/1060KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-execution: unit type: stationary version: container technical data motor: motor manufacturers: mtu engine type: 18 v 2000 g motor no.: 539 100 618 cooling: water-cooled starting: electric 24 v dc speed: 1500 rpm fuel: fuel oil en 590 tech niche data generator: generator manufacturer: rwe piller gmbh generator type: semi-detached 102 80/5 gene. no.: 9503008181/2004 generator power: 1100 kva voltage: 400 / 231 volts power factor: cos. -phi 0.8 speed: 1500 rpm switchgear: execution: auto-start features: emergency power switch: generator switch 3 pin delivery: fitted tank: execution: internal tank, stand tank litres: 950 use: state: well received en year: 2005 delivery: immediately verl operating hours: 420 location: verl - germany stock number: 1093 
 EXECUTION: UNIT TYPE: STATIONARY VERSION: CONTAINER TECHNICAL DATA MOTOR: MOTOR MANUFACTURERS: MTU ENGINE TYPE: 18 V 2000 G MOTOR NO.: 539 100 618 COOLING: WATER-COOLED STARTING: ELECTRIC 24 V DC SPEED: 1500 RPM FUEL: FUEL OIL EN 590 TECH NICHE DATA GENERATOR: GENERATOR MANUFACTURER: RWE PILLER GMBH GENERATOR TYPE: SEMI-DETACHED 102 80/5 GENE. NO.: 9503008181/2004 GENERATOR POWER: 1100 KVA VOLTAGE: 400 / 231 VOLTS POWER FACTOR: COS. -PHI 0.8 SPEED: 1500 RPM SWITCHGEAR: EXECUTION: AUTO-START FEATURES: EMERGENCY POWER SWITCH: GENERATOR SWITCH 3 PIN DELIVERY: FITTED TANK: EXECUTION: INTERNAL TANK, STAND TANK LITRES: 950 USE: STATE: WELL RECEIVED EN YEAR: 2005 DELIVERY: IMMEDIATELY VERL OPERATING HOURS: 420 LOCATION: VERL - GERMANY STOCK NUMBER: 1093
Vendedor: Aggregatebau WA Notstromtechnik GmbH
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine 4-side shape sh30<br><br>pro-version high performance vertical packaging machine for shaped bags (4-side-sealing). - omron plc, interactive lcd touch panel display, automatic program-set-up, mark sensor, quick-change format unit, servomotor-sealing unit, schneider servomotor for film transport with vacuum-belts. - stainless steel (ss304) version including hot printer (production date, etc.). <br><br>- specifications: bag sizes: l(30-110)xw(30-90) | max. speed of the machine in neutral: 30 cycles/minute | 220v/3.0kw | 6bar, 0,55m³/min | machine dimensions: l1464xw1233xh1377mm | weight. 400kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE 4-SIDE SHAPE SH30

PRO-VERSION HIGH PERFORMANCE VERTICAL PACKAGING MACHINE FOR SHAPED BAGS (4-SIDE-SEALING). - OMRON PLC, INTERACTIVE LCD TOUCH PANEL DISPLAY, AUTOMATIC PROGRAM-SET-UP, MARK SENSOR, QUICK-CHANGE FORMAT UNIT, SERVOMOTOR-SEALING UNIT, SCHNEIDER SERVOMOTOR FOR FILM TRANSPORT WITH VACUUM-BELTS. - STAINLESS STEEL (SS304) VERSION INCLUDING HOT PRINTER (PRODUCTION DATE, ETC.).

- SPECIFICATIONS: BAG SIZES: L(30-110)XW(30-90) | MAX. SPEED OF THE MACHINE IN NEUTRAL: 30 CYCLES/MINUTE | 220V/3.0KW | 6BAR, 0,55M³/MIN | MACHINE DIMENSIONS: L1464XW1233XH1377MM | WEIGHT. 400KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-complete optimization.-sorting plant woodeye/dimter
consisting of:
begwxcx2tr
package conveyor
vacuum location lifter
transfer / separation
longitudinal feed in woodeye scanners up to 140 m / min.
woodeye crosscut / sorter update 2014
longitudinal feed in cross-cut saw opticut dimter 200 excel year 2005 waste conveyor
sorting stations 5 pcs. + b quality cross drop 500-2300 mm
automatic storage on 5 lifting tables with autom. lowering
dimensions of the system: 26 m x 7m
 COMPLETE OPTIMIZATION.-SORTING PLANT WOODEYE/DIMTER CONSISTING OF: BEGWXCX2TR PACKAGE CONVEYOR VACUUM LOCATION LIFTER TRANSFER / SEPARATION LONGITUDINAL FEED IN WOODEYE SCANNERS UP TO 140 M / MIN. WOODEYE CROSSCUT / SORTER UPDATE 2014 LONGITUDINAL FEED IN CROSS-CUT SAW OPTICUT DIMTER 200 EXCEL YEAR 2005 WASTE CONVEYOR SORTING STATIONS 5 PCS. + B QUALITY CROSS DROP 500-2300 MM AUTOMATIC STORAGE ON 5 LIFTING TABLES WITH AUTOM. LOWERING DIMENSIONS OF THE SYSTEM: 26 M X 7M
Vendedor: ScanSolutions GmbH
Año de construcción: usado
Ubicación: Land-amtec shrinktunnel-pof-l (high speed)<br><br>shrinktunnel suitable to be combined with amtec shrink wrapper speed shrink 35l. high speed shrinking with 0-20 m/min for pof (polyolefin) film. <br><br>- specifications: max. packaging size: l(customized)xw550xh250mm | tunnel size: l1500xw650xh300mm | power: 380v, max. 18kw | machine dimensions and weight: l1800xw1140xh1300mm, 700kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINKTUNNEL-POF-L (HIGH SPEED)

SHRINKTUNNEL SUITABLE TO BE COMBINED WITH AMTEC SHRINK WRAPPER SPEED SHRINK 35L. HIGH SPEED SHRINKING WITH 0-20 M/MIN FOR POF (POLYOLEFIN) FILM.

- SPECIFICATIONS: MAX. PACKAGING SIZE: L(CUSTOMIZED)XW550XH250MM | TUNNEL SIZE: L1500XW650XH300MM | POWER: 380V, MAX. 18KW | MACHINE DIMENSIONS AND WEIGHT: L1800XW1140XH1300MM, 700KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-execution: unit type: stationary version: container technical data motor: motor manufacturer: deutz engine type: bf 6 m 1013 fc engine no.: 00990581 motor power: 183 kw cooling: water-cooled starting: electric 24 v dc speed: 1500 rpm fuel q: fuel oil en 590 technical data generator: generator manufacturer: leroy somer generator power: 200 kva voltage: 400 / 231 volts power factor: cos. -phi 0.8 speed: 1500 rpm version: automatic start functions: emergency power supply litres: 750 state: well-preserved built: 2005 delivery: immediately verl price net in â?¬: on request: operating hours: 218 site: verl - germany     
 EXECUTION: UNIT TYPE: STATIONARY VERSION: CONTAINER TECHNICAL DATA MOTOR: MOTOR MANUFACTURER: DEUTZ ENGINE TYPE: BF 6 M 1013 FC ENGINE NO.: 00990581 MOTOR POWER: 183 KW COOLING: WATER-COOLED STARTING: ELECTRIC 24 V DC SPEED: 1500 RPM FUEL Q: FUEL OIL EN 590 TECHNICAL DATA GENERATOR: GENERATOR MANUFACTURER: LEROY SOMER GENERATOR POWER: 200 KVA VOLTAGE: 400 / 231 VOLTS POWER FACTOR: COS. -PHI 0.8 SPEED: 1500 RPM VERSION: AUTOMATIC START FUNCTIONS: EMERGENCY POWER SUPPLY LITRES: 750 STATE: WELL-PRESERVED BUILT: 2005 DELIVERY: IMMEDIATELY VERL PRICE NET IN &ACIRC;?&NOT;: ON REQUEST: OPERATING HOURS: 218 SITE: VERL - GERMANY
Vendedor: Aggregatebau WA Notstromtechnik GmbH
Año de construcción: usado
Ubicación: Land-amtec flowwrap f80-2xl80gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 600mm | 1 pendular knife | 220v, 3.6kw | no compressed air required | max. speed of the machine in neutral: 80 cycles/min | max. bag (not product) dimensions (mm): l(120-450)xw(50-200)xh(10-80) | machine dimensions (mm): l4380xw970xh1500 | weight (net/gross): 1160/1260kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F80-2XL80GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 600MM | 1 PENDULAR KNIFE | 220V, 3.6KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 80 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(120-450)XW(50-200)XH(10-80) | MACHINE DIMENSIONS (MM): L4380XW970XH1500 | WEIGHT (NET/GROSS): 1160/1260KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-execution: unit type: stationary version: skid frame specifications engine: engine manufacturer: mercedes engine type: om 352 engine no.: 352.960-058023 motor power: 56 ps cooling: water-cooled starting: electric 24 v dc speed: 1500 rpm kraftst off: heating oil en 590 technical data generator: generator manufacturer: a. van kaick generator type: dibs 42/40-4 gene. no.: 40613 generator power: 45 kva voltage: 400 / 231 volts power factor: cos. -phi 0.8 speed: 1500 rpm switchgear: execution: auto-start features: emergency operation switch: generator switch 3 pin delivery: width is supplied loose mm: 900 height mm: 1,000 depth mm: 400 tank: desing ng: width tank via the generator about mm: 650 height mm: 270 depth mm: 610 content / liter: approx. 100 dimensions of the unit: mm width approx.: 700 height mm: 1,100 length mm: 2,100 weight kg: 950 use: state: well get built: 1981 l ieferzeit: now operating hours: 522 location: verl - germany stock number: 1088 
 EXECUTION: UNIT TYPE: STATIONARY VERSION: SKID FRAME SPECIFICATIONS ENGINE: ENGINE MANUFACTURER: MERCEDES ENGINE TYPE: OM 352 ENGINE NO.: 352.960-058023 MOTOR POWER: 56 PS COOLING: WATER-COOLED STARTING: ELECTRIC 24 V DC SPEED: 1500 RPM KRAFTST OFF: HEATING OIL EN 590 TECHNICAL DATA GENERATOR: GENERATOR MANUFACTURER: A. VAN KAICK GENERATOR TYPE: DIBS 42/40-4 GENE. NO.: 40613 GENERATOR POWER: 45 KVA VOLTAGE: 400 / 231 VOLTS POWER FACTOR: COS. -PHI 0.8 SPEED: 1500 RPM SWITCHGEAR: EXECUTION: AUTO-START FEATURES: EMERGENCY OPERATION SWITCH: GENERATOR SWITCH 3 PIN DELIVERY: WIDTH IS SUPPLIED LOOSE MM: 900 HEIGHT MM: 1,000 DEPTH MM: 400 TANK: DESING NG: WIDTH TANK VIA THE GENERATOR ABOUT MM: 650 HEIGHT MM: 270 DEPTH MM: 610 CONTENT / LITER: APPROX. 100 DIMENSIONS OF THE UNIT: MM WIDTH APPROX.: 700 HEIGHT MM: 1,100 LENGTH MM: 2,100 WEIGHT KG: 950 USE: STATE: WELL GET BUILT: 1981 L IEFERZEIT: NOW OPERATING HOURS: 522 LOCATION: VERL - GERMANY STOCK NUMBER: 1088
Vendedor: Aggregatebau WA Notstromtechnik GmbH
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine 4-side / fin-seal shape sh40<br><br>pro-version high performance vertical packaging machine for shaped bags (fin- or 4-side-seal, to be decided in advance). omron plc, interactive lcd touch panel display, automatic program-set-up, mark sensor, quick-change format unit, servomotor-sealing unit, schneider servomotor for film transport with vacuum-belts. stainless steel (ss304) version including hot printer (production date, etc.). specifications: bag sizes: l(30-180)xw(30-60)mm | max. speed of the machine in neutral: 40 cycles/minute | 220v/2.5kw | 6bar, 0.55m³/min | machine dimensions: l1464xw1233xh1377mm | weight: 350kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE 4-SIDE / FIN-SEAL SHAPE SH40

PRO-VERSION HIGH PERFORMANCE VERTICAL PACKAGING MACHINE FOR SHAPED BAGS (FIN- OR 4-SIDE-SEAL, TO BE DECIDED IN ADVANCE). OMRON PLC, INTERACTIVE LCD TOUCH PANEL DISPLAY, AUTOMATIC PROGRAM-SET-UP, MARK SENSOR, QUICK-CHANGE FORMAT UNIT, SERVOMOTOR-SEALING UNIT, SCHNEIDER SERVOMOTOR FOR FILM TRANSPORT WITH VACUUM-BELTS. STAINLESS STEEL (SS304) VERSION INCLUDING HOT PRINTER (PRODUCTION DATE, ETC.). SPECIFICATIONS: BAG SIZES: L(30-180)XW(30-60)MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 40 CYCLES/MINUTE | 220V/2.5KW | 6BAR, 0.55M³/MIN | MACHINE DIMENSIONS: L1464XW1233XH1377MM | WEIGHT: 350KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-execution: unit type: stationary version: schallgedã¤mmt technical data motor: motor manufacturer: iveco engine type: n 45 tm 2a engine no.: 1611305 motor power: 87 kw cooling: water-cooled starting: electric 12 v dc speed: 1500 rpm fuel:  fuel oil en 590 technical data generator: generator manufacturer: stamford generator type: uci 274 c-1 gene. no.: 18080756 generator power: 100 kva voltage: 400 / 231 volts power factor: cos. -phi 0.8 speed: 1500 rpm switchgear: execution: automatic start functions: emergency operation switch: generator switch 4 pin delivery: fitted tank: execution: liter: 200 dimensions of the unit: mm width approx.: 1,050   height approx. mm: 1,760 length mm: 3,100 weight kg: 1,650 use: state: demonstration machine built: 2019 delivery: immediately verl price net in â?¬: on request: hours of operation: 2 location: verl - germany      
 EXECUTION: UNIT TYPE: STATIONARY VERSION: SCHALLGED&ATILDE;&CURREN;MMT TECHNICAL DATA MOTOR: MOTOR MANUFACTURER: IVECO ENGINE TYPE: N 45 TM 2A ENGINE NO.: 1611305 MOTOR POWER: 87 KW COOLING: WATER-COOLED STARTING: ELECTRIC 12 V DC SPEED: 1500 RPM FUEL: FUEL OIL EN 590 TECHNICAL DATA GENERATOR: GENERATOR MANUFACTURER: STAMFORD GENERATOR TYPE: UCI 274 C-1 GENE. NO.: 18080756 GENERATOR POWER: 100 KVA VOLTAGE: 400 / 231 VOLTS POWER FACTOR: COS. -PHI 0.8 SPEED: 1500 RPM SWITCHGEAR: EXECUTION: AUTOMATIC START FUNCTIONS: EMERGENCY OPERATION SWITCH: GENERATOR SWITCH 4 PIN DELIVERY: FITTED TANK: EXECUTION: LITER: 200 DIMENSIONS OF THE UNIT: MM WIDTH APPROX.: 1,050 HEIGHT APPROX. MM: 1,760 LENGTH MM: 3,100 WEIGHT KG: 1,650 USE: STATE: DEMONSTRATION MACHINE BUILT: 2019 DELIVERY: IMMEDIATELY VERL PRICE NET IN &ACIRC;?&NOT;: ON REQUEST: HOURS OF OPERATION: 2 LOCATION: VERL - GERMANY
Vendedor: Aggregatebau WA Notstromtechnik GmbH
Año de construcción: usado
Ubicación: Land-amtec shrinktunnel-pof-xl (high speed)<br><br>shrinktunnel suitable to be combined with amtec shrink wrapper speed shrink 35xl. high speed shrinking with 0-20 m/min for pof (polyolefin) film. <br><br>- specifications: max. packaging size: l(customized)xw700xh250mm | tunnel size: l1500xw800xh300mm, power: 380v, max. 20kw | machine dimensions and weight: l1800xw1290xh1300mm, 750kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINKTUNNEL-POF-XL (HIGH SPEED)

SHRINKTUNNEL SUITABLE TO BE COMBINED WITH AMTEC SHRINK WRAPPER SPEED SHRINK 35XL. HIGH SPEED SHRINKING WITH 0-20 M/MIN FOR POF (POLYOLEFIN) FILM.

- SPECIFICATIONS: MAX. PACKAGING SIZE: L(CUSTOMIZED)XW700XH250MM | TUNNEL SIZE: L1500XW800XH300MM, POWER: 380V, MAX. 20KW | MACHINE DIMENSIONS AND WEIGHT: L1800XW1290XH1300MM, 750KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-execution: unit type: stationary version: schallgedã¤mmt technical data motor: motor manufacturer: iveco engine type: cursor 16 hp 1 w motor no.: 002704 motor power: 518 kw cooling: water-cooled starting: electric 24 v dc speed: 1500 rpm power fabric: fuel oil en 590 technical data generator: generator manufacturer: stamford avk generator type: p 544 f gene. no.: 18040146 generator power: 670 kva voltage: 400 / 231 volts power factor: cos. -phi 0.8 speed: 1500 rpm switchgear: execution: automatic start functions: emergency operation switch: generator switch 4 pin delivery: fitted tank: execution: liter: 1,000 dimensions of the unit: mm width approx.: 1.850   mm height: 2,250 length mm: 4.820 weight kg: 6,500 use: state: demonstration machine built: 2019 delivery time: kw 01/2019 hours: 2 location: verl - germany     

 EXECUTION: UNIT TYPE: STATIONARY VERSION: SCHALLGED&ATILDE;&CURREN;MMT TECHNICAL DATA MOTOR: MOTOR MANUFACTURER: IVECO ENGINE TYPE: CURSOR 16 HP 1 W MOTOR NO.: 002704 MOTOR POWER: 518 KW COOLING: WATER-COOLED STARTING: ELECTRIC 24 V DC SPEED: 1500 RPM POWER FABRIC: FUEL OIL EN 590 TECHNICAL DATA GENERATOR: GENERATOR MANUFACTURER: STAMFORD AVK GENERATOR TYPE: P 544 F GENE. NO.: 18040146 GENERATOR POWER: 670 KVA VOLTAGE: 400 / 231 VOLTS POWER FACTOR: COS. -PHI 0.8 SPEED: 1500 RPM SWITCHGEAR: EXECUTION: AUTOMATIC START FUNCTIONS: EMERGENCY OPERATION SWITCH: GENERATOR SWITCH 4 PIN DELIVERY: FITTED TANK: EXECUTION: LITER: 1,000 DIMENSIONS OF THE UNIT: MM WIDTH APPROX.: 1.850 MM HEIGHT: 2,250 LENGTH MM: 4.820 WEIGHT KG: 6,500 USE: STATE: DEMONSTRATION MACHINE BUILT: 2019 DELIVERY TIME: KW 01/2019 HOURS: 2 LOCATION: VERL - GERMANY
Vendedor: Aggregatebau WA Notstromtechnik GmbH
Año de construcción: usado
Ubicación: Land-amtec flowwrap f120-l60bp - 1 pendular knife - bottom film feed<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, medium/larger products. infeed table with automatic transport through pushers into the machine. film supply from the bottom for product with low stability, with humidity or some stickiness (to be tested/confirmed). automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 350mm | 1 pendular knife | 220v, 2.4kw | no compressed air required | max. speed of the machine in neutral: 120 cycles/min | max. bag (not product) dimensions (mm): l(110-330)xw(30-130)xh(10-60) | machine dimensions (mm): l3670xw820xh1410 | weight (net/gross): 800/850kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F120-L60BP - 1 PENDULAR KNIFE - BOTTOM FILM FEED

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, MEDIUM/LARGER PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. FILM SUPPLY FROM THE BOTTOM FOR PRODUCT WITH LOW STABILITY, WITH HUMIDITY OR SOME STICKINESS (TO BE TESTED/CONFIRMED). AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 350MM | 1 PENDULAR KNIFE | 220V, 2.4KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 120 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(110-330)XW(30-130)XH(10-60) | MACHINE DIMENSIONS (MM): L3670XW820XH1410 | WEIGHT (NET/GROSS): 800/850KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-execution: unit type: stationary version: skid frame technical data motor: motor manufacturers: volvo engine type: tad 1641 ge motor no.: 2016041854 motor power: 484 kw cooling: water-cooled starting: electric 24 v dc speed: 1500 rpm kraftsto ff: fuel oil en 590 technical data generator: generator manufacturer: leroy somer generator type: lsa 47.2m8c 6/4 gene. no.: 214076/4 generator power: 550 kva voltage: 400 / 231 volts power factor: cos. -phi 0.8 speed: 1500 rpm use: state: well get built: 2007 delivery: immediately operating hours: 204 location: verl - germany stock number: 1083 
 EXECUTION: UNIT TYPE: STATIONARY VERSION: SKID FRAME TECHNICAL DATA MOTOR: MOTOR MANUFACTURERS: VOLVO ENGINE TYPE: TAD 1641 GE MOTOR NO.: 2016041854 MOTOR POWER: 484 KW COOLING: WATER-COOLED STARTING: ELECTRIC 24 V DC SPEED: 1500 RPM KRAFTSTO FF: FUEL OIL EN 590 TECHNICAL DATA GENERATOR: GENERATOR MANUFACTURER: LEROY SOMER GENERATOR TYPE: LSA 47.2M8C 6/4 GENE. NO.: 214076/4 GENERATOR POWER: 550 KVA VOLTAGE: 400 / 231 VOLTS POWER FACTOR: COS. -PHI 0.8 SPEED: 1500 RPM USE: STATE: WELL GET BUILT: 2007 DELIVERY: IMMEDIATELY OPERATING HOURS: 204 LOCATION: VERL - GERMANY STOCK NUMBER: 1083
Vendedor: Aggregatebau WA Notstromtechnik GmbH
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine 4-side / round sealiing rd30<br><br>pro-version high performance vertical packaging machine with dual film supply (two film rolls) for round- or 4-side-sealiing of larger bags. - omron plc, interactive lcd touch panel display, automatic program-set-up, mark sensor, quick-change format unit, servomotor-sealing unit, schneider servomotor for film transport with vacuum-belts. no format tool needed to form the bags. stainless steel (ss304) version including hot printer (production date, etc.). <br><br>- specifications: bag sizes: l(50-200)xw(50-175)mm | max. speed of the machine in neutral: 30 cycles/min | 220v/3.5kw | 6bar, 0.55m³/min | machine dimensions: l977xw1630xh1566mm | weight: 450kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE 4-SIDE / ROUND SEALIING RD30

PRO-VERSION HIGH PERFORMANCE VERTICAL PACKAGING MACHINE WITH DUAL FILM SUPPLY (TWO FILM ROLLS) FOR ROUND- OR 4-SIDE-SEALIING OF LARGER BAGS. - OMRON PLC, INTERACTIVE LCD TOUCH PANEL DISPLAY, AUTOMATIC PROGRAM-SET-UP, MARK SENSOR, QUICK-CHANGE FORMAT UNIT, SERVOMOTOR-SEALING UNIT, SCHNEIDER SERVOMOTOR FOR FILM TRANSPORT WITH VACUUM-BELTS. NO FORMAT TOOL NEEDED TO FORM THE BAGS. STAINLESS STEEL (SS304) VERSION INCLUDING HOT PRINTER (PRODUCTION DATE, ETC.).

- SPECIFICATIONS: BAG SIZES: L(50-200)XW(50-175)MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 30 CYCLES/MIN | 220V/3.5KW | 6BAR, 0.55M³/MIN | MACHINE DIMENSIONS: L977XW1630XH1566MM | WEIGHT: 450KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-execution: unit type: mobile version: schallgedã¤mmt technical data motor: motor manufacturer: one motor type: d 2842 le engine power: 424 kw cooling: water-cooled starting: electric 24 v dc speed: 1500 rpm fuel: fuel oil en 590 technis che data generator: generator manufacturer: ansaldo fki generator type: m 7b 316 ld 4 generator power: 525 kva voltage: 400 / 231 volts power factor: cos. -phi 0.8 speed: 1500 rpm switchgear: execution: auto-start features: peak-load operation switch: generator switch 3 pin delivery: built tank: execution: double-walled litres: 1,000 dimensions of the unit: width approx. mm: 2350 height mm: 3.260 length mm: 9.230 weight kg: 10,600 use: state: well get built: 1992 delivery: immediately verl price net in â?¬: on request: hours of operation: 701 location: verl - germany     

 EXECUTION: UNIT TYPE: MOBILE VERSION: SCHALLGED&ATILDE;&CURREN;MMT TECHNICAL DATA MOTOR: MOTOR MANUFACTURER: ONE MOTOR TYPE: D 2842 LE ENGINE POWER: 424 KW COOLING: WATER-COOLED STARTING: ELECTRIC 24 V DC SPEED: 1500 RPM FUEL: FUEL OIL EN 590 TECHNIS CHE DATA GENERATOR: GENERATOR MANUFACTURER: ANSALDO FKI GENERATOR TYPE: M 7B 316 LD 4 GENERATOR POWER: 525 KVA VOLTAGE: 400 / 231 VOLTS POWER FACTOR: COS. -PHI 0.8 SPEED: 1500 RPM SWITCHGEAR: EXECUTION: AUTO-START FEATURES: PEAK-LOAD OPERATION SWITCH: GENERATOR SWITCH 3 PIN DELIVERY: BUILT TANK: EXECUTION: DOUBLE-WALLED LITRES: 1,000 DIMENSIONS OF THE UNIT: WIDTH APPROX. MM: 2350 HEIGHT MM: 3.260 LENGTH MM: 9.230 WEIGHT KG: 10,600 USE: STATE: WELL GET BUILT: 1992 DELIVERY: IMMEDIATELY VERL PRICE NET IN &ACIRC;?&NOT;: ON REQUEST: HOURS OF OPERATION: 701 LOCATION: VERL - GERMANY
Vendedor: Aggregatebau WA Notstromtechnik GmbH
Año de construcción: usado
Ubicación: Land-amtec shrinktunnel-pof-m (high speed)<br><br>shrinktunnel suitable to be combined with amtec shrink wrapper speed shrink 35m. high speed shrinking with 0-20 m/min for pof (polyolefin) film. <br><br>- specifications: max. packaging size: l(customized)xw400xh250mm | tunnel size: l1500xw500xh300mm | power: 380v, max. 16kw | machine dimensions and weight: l1800xw990xh1300mm, 650kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINKTUNNEL-POF-M (HIGH SPEED)

SHRINKTUNNEL SUITABLE TO BE COMBINED WITH AMTEC SHRINK WRAPPER SPEED SHRINK 35M. HIGH SPEED SHRINKING WITH 0-20 M/MIN FOR POF (POLYOLEFIN) FILM.

- SPECIFICATIONS: MAX. PACKAGING SIZE: L(CUSTOMIZED)XW400XH250MM | TUNNEL SIZE: L1500XW500XH300MM | POWER: 380V, MAX. 16KW | MACHINE DIMENSIONS AND WEIGHT: L1800XW990XH1300MM, 650KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-execution: unit type: stationary version: container technical data motor: motor manufacturer: perkins engine type: 4012tag engine no.: dgai20000u05030 motor power: 1.136 kw cooling: water-cooled starting: electric 24 v dc speed: 1500 rpm power tstoff: fuel oil en 590 technical data generator: generator manufacturer: piller gene. no.: 1445508 generator power: 1400 kva voltage: 400 / 231 volts power factor: cos. -phi 0.8 speed: 1500 rpm switchgear: execution: automatic start functions: emergency power supply tank: execution: external tank, stand tank, double wall in the container width mm: height of 6,000 mm: 2,800 depth mm: 2,500 content / liter: 5000   
 
dimensions of the unit: mm width approx.: 2,600 height mm: 3,550 length mm: 12,000 weight kg: 24,000 use: state: well get built: 1997 delivery: immediately verl price net in â?¬: on request: operating hours: 123 site: verl - germany nd     

 EXECUTION: UNIT TYPE: STATIONARY VERSION: CONTAINER TECHNICAL DATA MOTOR: MOTOR MANUFACTURER: PERKINS ENGINE TYPE: 4012TAG ENGINE NO.: DGAI20000U05030 MOTOR POWER: 1.136 KW COOLING: WATER-COOLED STARTING: ELECTRIC 24 V DC SPEED: 1500 RPM POWER TSTOFF: FUEL OIL EN 590 TECHNICAL DATA GENERATOR: GENERATOR MANUFACTURER: PILLER GENE. NO.: 1445508 GENERATOR POWER: 1400 KVA VOLTAGE: 400 / 231 VOLTS POWER FACTOR: COS. -PHI 0.8 SPEED: 1500 RPM SWITCHGEAR: EXECUTION: AUTOMATIC START FUNCTIONS: EMERGENCY POWER SUPPLY TANK: EXECUTION: EXTERNAL TANK, STAND TANK, DOUBLE WALL IN THE CONTAINER WIDTH MM: HEIGHT OF 6,000 MM: 2,800 DEPTH MM: 2,500 CONTENT / LITER: 5000 DIMENSIONS OF THE UNIT: MM WIDTH APPROX.: 2,600 HEIGHT MM: 3,550 LENGTH MM: 12,000 WEIGHT KG: 24,000 USE: STATE: WELL GET BUILT: 1997 DELIVERY: IMMEDIATELY VERL PRICE NET IN &ACIRC;?&NOT;: ON REQUEST: OPERATING HOURS: 123 SITE: VERL - GERMANY ND
Vendedor: Aggregatebau WA Notstromtechnik GmbH
Año de construcción: usado
Ubicación: Land-amtec flowwrap f120-l60gp - 1 pendular knife - guiding device<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 350mm | 1 pendular knife | 220v, 2.4kw | no compressed air required | max. speed of the machine in neutral: 120 cycles/min | max. bag (not product) dimensions (mm): l(110-330)xw(30-130)xh(10-60) | machine dimensions (mm): l3670xw820xh1410 | weight (net/gross): 800/850kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F120-L60GP - 1 PENDULAR KNIFE - GUIDING DEVICE

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 350MM | 1 PENDULAR KNIFE | 220V, 2.4KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 120 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(110-330)XW(30-130)XH(10-60) | MACHINE DIMENSIONS (MM): L3670XW820XH1410 | WEIGHT (NET/GROSS): 800/850KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-execution: unit type: stationary version: skid frame specifications engine: engine manufacturer: mercedes-benz engine type: om 402 motor no.: 402.900-000-195957 motor power: 123 kw cooling: water-cooled starting: electric 24 v dc speed: 1500 rpm   
fuel: fuel oil en 590 technical data generator: generator manufacturer: a. van kaick generator type: dkb 49/150-4ts gene. no.: 5133259 generator power: 150 kva voltage: 400 / 231 volts power factor: cos. -phi 0.8 speed: 1500 rpm switchgear: execution: use wired on terminals: state: well get built: 1980 delivery: immediately operating hours: location: verl - germany stock number: 1080 
 EXECUTION: UNIT TYPE: STATIONARY VERSION: SKID FRAME SPECIFICATIONS ENGINE: ENGINE MANUFACTURER: MERCEDES-BENZ ENGINE TYPE: OM 402 MOTOR NO.: 402.900-000-195957 MOTOR POWER: 123 KW COOLING: WATER-COOLED STARTING: ELECTRIC 24 V DC SPEED: 1500 RPM FUEL: FUEL OIL EN 590 TECHNICAL DATA GENERATOR: GENERATOR MANUFACTURER: A. VAN KAICK GENERATOR TYPE: DKB 49/150-4TS GENE. NO.: 5133259 GENERATOR POWER: 150 KVA VOLTAGE: 400 / 231 VOLTS POWER FACTOR: COS. -PHI 0.8 SPEED: 1500 RPM SWITCHGEAR: EXECUTION: USE WIRED ON TERMINALS: STATE: WELL GET BUILT: 1980 DELIVERY: IMMEDIATELY OPERATING HOURS: LOCATION: VERL - GERMANY STOCK NUMBER: 1080
Vendedor: Aggregatebau WA Notstromtechnik GmbH
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine 4-side / round sealing rd50<br><br>pro-version high performance vertical packaging machine with dual film supply (two film rolls) for round- or 4-side-sealiing of smaller bags. omron plc, interactive lcd touch panel display, automatic program-set-up, mark sensor, quick-change format unit, servomotor-sealing unit, schneider servomotor for film transport with vacuum-belts. no format tool needed to form the bags. stainless steel (ss304) version including hot printer (production date, etc.). <br><br>- specifications: bag sizes: l(20-100)xw(20-80)mm | max. speed of the machine in neutral: 50 cycles/minute | 220v/2.5kw | 6bar, 0.55m³/min | machine dimensions: l977xw1630xh1566mm | weight: 350kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE 4-SIDE / ROUND SEALING RD50

PRO-VERSION HIGH PERFORMANCE VERTICAL PACKAGING MACHINE WITH DUAL FILM SUPPLY (TWO FILM ROLLS) FOR ROUND- OR 4-SIDE-SEALIING OF SMALLER BAGS. OMRON PLC, INTERACTIVE LCD TOUCH PANEL DISPLAY, AUTOMATIC PROGRAM-SET-UP, MARK SENSOR, QUICK-CHANGE FORMAT UNIT, SERVOMOTOR-SEALING UNIT, SCHNEIDER SERVOMOTOR FOR FILM TRANSPORT WITH VACUUM-BELTS. NO FORMAT TOOL NEEDED TO FORM THE BAGS. STAINLESS STEEL (SS304) VERSION INCLUDING HOT PRINTER (PRODUCTION DATE, ETC.).

- SPECIFICATIONS: BAG SIZES: L(20-100)XW(20-80)MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 50 CYCLES/MINUTE | 220V/2.5KW | 6BAR, 0.55M³/MIN | MACHINE DIMENSIONS: L977XW1630XH1566MM | WEIGHT: 350KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 25.000 €
Ubicación: Land-technical data:
bj. 1990
x = 7,500 mm
y = 1000 mm
z = 800 mm
cnc control siemens 880 m
60 atc / 60-fach tool changer
3,000 rpm
sk50
2 round table 800 x 800 mm
main spindle motor and feed motors
bosch drehstomtechnik
coolant through spindle
head horizontally and vertically;
rear level freely programmable
documentation / data backup
weight approx. 42 to. TECHNICAL DATA: BJ. 1990 X = 7,500 MM Y = 1000 MM Z = 800 MM CNC CONTROL SIEMENS 880 M 60 ATC / 60-FACH TOOL CHANGER 3,000 RPM SK50 2 ROUND TABLE 800 X 800 MM MAIN SPINDLE MOTOR AND FEED MOTORS BOSCH DREHSTOMTECHNIK COOLANT THROUGH SPINDLE HEAD HORIZONTALLY AND VERTICALLY; REAR LEVEL FREELY PROGRAMMABLE DOCUMENTATION / DATA BACKUP WEIGHT APPROX. 42 TO.
Vendedor: Egon Niehenke Maschinenbau und Vermietung e.K.
Año de construcción: usado
Ubicación: Land-amtec shrinktunnel-pof-xtra (for very large/wide products)<br><br>shrink tunnel for extra large/wide products. suitable for polyolefin films. adjustable speed and temperature. can be combined with sideshrink w20-xxl. - technical specifications: 380v, 15kw | speed: max. 15m/min | max. product dimensions (mm): w1500xh250 (can be varied on demand) | machine dimensions: l2840xw1560xh1310mm | weight (net/gross): 450/550kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINKTUNNEL-POF-XTRA (FOR VERY LARGE/WIDE PRODUCTS)

SHRINK TUNNEL FOR EXTRA LARGE/WIDE PRODUCTS. SUITABLE FOR POLYOLEFIN FILMS. ADJUSTABLE SPEED AND TEMPERATURE. CAN BE COMBINED WITH SIDESHRINK W20-XXL. - TECHNICAL SPECIFICATIONS: 380V, 15KW | SPEED: MAX. 15M/MIN | MAX. PRODUCT DIMENSIONS (MM): W1500XH250 (CAN BE VARIED ON DEMAND) | MACHINE DIMENSIONS: L2840XW1560XH1310MM | WEIGHT (NET/GROSS): 450/550KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-power in kw: 145
speed 1/min: 1500
altitude: 280 (cm)

POWER IN KW: 145 SPEED 1/MIN: 1500 ALTITUDE: 280 (CM)
Vendedor: FIOTECH e.K.
Año de construcción: usado
Ubicación: Land-amtec flowwrap f230-l40b - 2 rotary knives - bottom film feed<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, small products. infeed table with automatic transport through pushers into the machine. film supply from the bottom for product with low stability, with humidity or some stickiness (to be tested/confirmed). automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 350mm | 2 rotating knives | 220v, 2.8kw | no compressed air required | max. speed of the machine in neutral: 230 cycles/min | max. bag (not product) dimensions (mm): l((65-190)or(120-280))xw(50-160)xh(0-40) | machine dimensions (mm): l4020xw720xh1320 | weight (net/gross): 800/850kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F230-L40B - 2 ROTARY KNIVES - BOTTOM FILM FEED

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, SMALL PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. FILM SUPPLY FROM THE BOTTOM FOR PRODUCT WITH LOW STABILITY, WITH HUMIDITY OR SOME STICKINESS (TO BE TESTED/CONFIRMED). AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 350MM | 2 ROTATING KNIVES | 220V, 2.8KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 230 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L((65-190)OR(120-280))XW(50-160)XH(0-40) | MACHINE DIMENSIONS (MM): L4020XW720XH1320 | WEIGHT (NET/GROSS): 800/850KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MTE types: