107 ofertas

Año de construcción: usado
Ubicación: Land-year built: approx 1980
blade length: 300 mm
cutting width: 290 mm
gr. material thickness: 80 x 10 mm
machine weight: 250 kg

equipment / accessories
pneumatic release for continuous operation
foot switch
machine base

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the snips in advance under power.
 YEAR BUILT: APPROX 1980 BLADE LENGTH: 300 MM CUTTING WIDTH: 290 MM GR. MATERIAL THICKNESS: 80 X 10 MM MACHINE WEIGHT: 250 KG EQUIPMENT / ACCESSORIES PNEUMATIC RELEASE FOR CONTINUOUS OPERATION FOOT SWITCH MACHINE BASE ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE SNIPS IN ADVANCE UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-section steel shears, profile shears, punch, punching machine, punch<br /><br />-pressure force 40 to<br />-hydraulisch<br />-stamping<br />-scissors<br />-to cut<br />-ausklinken<br />-footswitch<br />-div. punching tools<br />-dimensions 1070/1000 / h1630 mm<br />-weight 862 kg SECTION STEEL SHEARS, PROFILE SHEARS, PUNCH, PUNCHING MACHINE, PUNCH

-PRESSURE FORCE 40 TO
-HYDRAULISCH
-STAMPING
-SCISSORS
-TO CUT
-AUSKLINKEN
-FOOTSWITCH
-DIV. PUNCHING TOOLS
-DIMENSIONS 1070/1000 / H1630 MM
-WEIGHT 862 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 9.800 €
Ubicación: Land-profile steel scissors and hole punch with a cutting force of 500 kn radius on the punching side 410 mm

hydraulic presser on the flat steel scissors

range of punches and dies in the price included PROFILE STEEL SCISSORS AND HOLE PUNCH WITH A CUTTING FORCE OF 500 KN RADIUS ON THE PUNCHING SIDE 410 MM HYDRAULIC PRESSER ON THE FLAT STEEL SCISSORS RANGE OF PUNCHES AND DIES IN THE PRICE INCLUDED
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 280 €
Ubicación: Land-weight approx.: 500 kg<br/>dimensions (l x w x h) approx.: 2000 x 1020 x 1900 mm<br/>description: further details unknown WEIGHT APPROX.: 500 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 1020 X 1900 MM
DESCRIPTION: FURTHER DETAILS UNKNOWN
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-nominal current: 15.2a.  NOMINAL CURRENT: 15.2A.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-round bar steel: 38 mm<br/>square edge steel: 34 mm<br/>l-beam: 80x8 mm<br/>blade length: 180 mm<br/>flat steel: 100x12 mm<br/>weight of the machine ca.: 800 kg<br/><br/><br/><br/><br/> ROUND BAR STEEL: 38 MM
SQUARE EDGE STEEL: 34 MM
L-BEAM: 80X8 MM
BLADE LENGTH: 180 MM
FLAT STEEL: 100X12 MM
WEIGHT OF THE MACHINE CA.: 800 KG




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Precio: 3.800 €
Ubicación: Land-punching power: 300 kn

with electromagnetic stroke release via foot switch

range of tools is included in the price  PUNCHING POWER: 300 KN WITH ELECTROMAGNETIC STROKE RELEASE VIA FOOT SWITCH RANGE OF TOOLS IS INCLUDED IN THE PRICE
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-section steel shears, profile shears, punch, punching machine, punch<br /><br />- pressure force 45 to<br />-stamping<br />scissors<br />-to cut<br />-ausklinken<br />-electric tripping<br />-3x footswitch<br />div. stamps and dies<br />-supply dimensions 2130/1490 / h1900 mm<br />-transport dimensions 1495/960 / h1900 mm<br />-weight 1364 kg SECTION STEEL SHEARS, PROFILE SHEARS, PUNCH, PUNCHING MACHINE, PUNCH

- PRESSURE FORCE 45 TO
-STAMPING
SCISSORS
-TO CUT
-AUSKLINKEN
-ELECTRIC TRIPPING
-3X FOOTSWITCH
DIV. STAMPS AND DIES
-SUPPLY DIMENSIONS 2130/1490 / H1900 MM
-TRANSPORT DIMENSIONS 1495/960 / H1900 MM
-WEIGHT 1364 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 699 €
Ubicación: Land-mubea shaped punch

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  MUBEA SHAPED PUNCH CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-pressure: 050 t<br/>punching cross-cut in cmm:  <br/>stroke:  mm<br/>throat: max. 610 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 1,6 t<br/>dimensions of the machine ca.: 0,80 x 1,40 x 1,90 m<br/>- including assortment of stamps and dies<br/><br/><br/><br/><br/> PRESSURE: 050 T
PUNCHING CROSS-CUT IN CMM:
STROKE: MM
THROAT: MAX. 610 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1,6 T
DIMENSIONS OF THE MACHINE CA.: 0,80 X 1,40 X 1,90 M
- INCLUDING ASSORTMENT OF STAMPS AND DIES




Vendedor: Frech GmbH
Año de construcción: usado
Precio: 1.670 €
Ubicación: Land-mubea
combined rod shear profile and punching and notcher
type kbl 11 n

technical data:
 
type kbl 11 n

flat steel scissor blade length 160 mm
 cuts flat material up to 100 x 7 mm
 shear
 cuts at 90 â° up to 60 x 8 mm l steel
 rod shear cuts
 steel up to 33 mm
 square steel up to 30 mm
 flat material up to 130 x 13 mm
 notching device for triangular ausklingungen t s 60 x 10 mm
 hole punch:
 cutting force 350 kn
 throat depth 320 mm
 punches in steel up to 30 mm ã? 9 mm
 punches in steel up to 20 mm ã? 13 mm

weight ca. 1500 kg

a vat invoice is created for you. MUBEA COMBINED ROD SHEAR PROFILE AND PUNCHING AND NOTCHER TYPE KBL 11 N TECHNICAL DATA: TYPE KBL 11 N FLAT STEEL SCISSOR BLADE LENGTH 160 MM CUTS FLAT MATERIAL UP TO 100 X 7 MM SHEAR CUTS AT 90 &ACIRC;&DEG; UP TO 60 X 8 MM L STEEL ROD SHEAR CUTS STEEL UP TO 33 MM SQUARE STEEL UP TO 30 MM FLAT MATERIAL UP TO 130 X 13 MM NOTCHING DEVICE FOR TRIANGULAR AUSKLINGUNGEN T S 60 X 10 MM HOLE PUNCH: CUTTING FORCE 350 KN THROAT DEPTH 320 MM PUNCHES IN STEEL UP TO 30 MM &ATILDE;? 9 MM PUNCHES IN STEEL UP TO 20 MM &ATILDE;? 13 MM WEIGHT CA. 1500 KG A VAT INVOICE IS CREATED FOR YOU.
Vendedor: Fa. Schönknecht
Año de construcción: usado
Ubicación: Land-pressure: 100 t<br/>hole diameter in sheet thickness: Ø 40 in 22 mm<br/>throat: 760 mm<br/>weight of the machine ca.: 3.600 kg<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> PRESSURE: 100 T
HOLE DIAMETER IN SHEET THICKNESS: Ø 40 IN 22 MM
THROAT: 760 MM
WEIGHT OF THE MACHINE CA.: 3.600 KG
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Precio: 5.300 €
Ubicación: Land-maximum punching force: 750 kn

inclusive range of tool MAXIMUM PUNCHING FORCE: 750 KN INCLUSIVE RANGE OF TOOL
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-punching capacity: 550 kn<br/>pressing power: unbkt. t<br/>control: unbkt. <br/>number:  <br/>internal diameter:  mm<br/>external diameter:  mm<br/>thickness:  mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> PUNCHING CAPACITY: 550 KN
PRESSING POWER: UNBKT. T
CONTROL: UNBKT.
NUMBER:
INTERNAL DIAMETER: MM
EXTERNAL DIAMETER: MM
THICKNESS: MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Precio: 13.800 €
Ubicación: Land-maximum punching capacity: 1000 kn

max radius: 760 mm

3-stamp tool (tools can be individually selected)

sliding fence sled with material clamps

range of punches and dies

weight: 4,000 kg MAXIMUM PUNCHING CAPACITY: 1000 KN MAX RADIUS: 760 MM 3-STAMP TOOL (TOOLS CAN BE INDIVIDUALLY SELECTED) SLIDING FENCE SLED WITH MATERIAL CLAMPS RANGE OF PUNCHES AND DIES WEIGHT: 4,000 KG
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 180 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-machine was until recently still in operation, and comes from a betriebsauflã¶sung.der is net price, you get a rechnung.bei questions can you have me call 01708344313.wir even more machines coming from the operational resolution, like we sell them all in a posten.versand after arrangement. since it's used machines, we can give no guarantee on this. flat steel scissor blade length: 220 mmbleche until: 11 mmflachstahl to: 120 x 13 mmprofilstahlscherewinkeleisen to: 60 x 8 mmt iron up: 60 x 8 mmu-and i steel until: 6 1/2 nphubzahl: approx. 55 / min. stabstahlschererundstahl up: 33 mmvierkantstahl to: 30 mmausklinkerbleche until: 10 mmklinkbreite to: 90 mmklinktiefe to: 60 mmdie machine has single stroke and continuous stroke. power: 5.5 kwgewicht: approx. 700 kgstandflã¤che: b 1.10 x h 0.80 x 1.55 m MACHINE WAS UNTIL RECENTLY STILL IN OPERATION, AND COMES FROM A BETRIEBSAUFL&ATILDE;&PARA;SUNG.DER IS NET PRICE, YOU GET A RECHNUNG.BEI QUESTIONS CAN YOU HAVE ME CALL 01708344313.WIR EVEN MORE MACHINES COMING FROM THE OPERATIONAL RESOLUTION, LIKE WE SELL THEM ALL IN A POSTEN.VERSAND AFTER ARRANGEMENT. SINCE IT'S USED MACHINES, WE CAN GIVE NO GUARANTEE ON THIS. FLAT STEEL SCISSOR BLADE LENGTH: 220 MMBLECHE UNTIL: 11 MMFLACHSTAHL TO: 120 X 13 MMPROFILSTAHLSCHEREWINKELEISEN TO: 60 X 8 MMT IRON UP: 60 X 8 MMU-AND I STEEL UNTIL: 6 1/2 NPHUBZAHL: APPROX. 55 / MIN. STABSTAHLSCHERERUNDSTAHL UP: 33 MMVIERKANTSTAHL TO: 30 MMAUSKLINKERBLECHE UNTIL: 10 MMKLINKBREITE TO: 90 MMKLINKTIEFE TO: 60 MMDIE MACHINE HAS SINGLE STROKE AND CONTINUOUS STROKE. POWER: 5.5 KWGEWICHT: APPROX. 700 KGSTANDFL&ATILDE;&CURREN;CHE: B 1.10 X H 0.80 X 1.55 M
Vendedor: Klema
Año de construcción: usado
Precio: 220 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-shear - combined mubea kbl 16 n

round steel: 45 mm
square steel: 42 mm
angle steel: 130 x 13 mm
notching device: rectangle klink: 14 x 30 x 55 mm
weight approximately: 3.5 t
5 x combined shear

we have for this purpose still tool that we add.
machine was until recently still in operation and originates from a reversal of the operation.
the price is net, you will receive an invoice.
if you have questions you can me like to call 01708344313.
we have more machinery resulting from the reversal of the operation, like we sell them all in one post.
shipping is possible by arrangement.
since it's used machines, we can give no guarantee on this.
 SHEAR - COMBINED MUBEA KBL 16 N ROUND STEEL: 45 MM SQUARE STEEL: 42 MM ANGLE STEEL: 130 X 13 MM NOTCHING DEVICE: RECTANGLE KLINK: 14 X 30 X 55 MM WEIGHT APPROXIMATELY: 3.5 T 5 X COMBINED SHEAR WE HAVE FOR THIS PURPOSE STILL TOOL THAT WE ADD. MACHINE WAS UNTIL RECENTLY STILL IN OPERATION AND ORIGINATES FROM A REVERSAL OF THE OPERATION. THE PRICE IS NET, YOU WILL RECEIVE AN INVOICE. IF YOU HAVE QUESTIONS YOU CAN ME LIKE TO CALL 01708344313. WE HAVE MORE MACHINERY RESULTING FROM THE REVERSAL OF THE OPERATION, LIKE WE SELL THEM ALL IN ONE POST. SHIPPING IS POSSIBLE BY ARRANGEMENT. SINCE IT'S USED MACHINES, WE CAN GIVE NO GUARANTEE ON THIS.
Vendedor: Klema
Año de construcción: usado
Precio: 350 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 13.200 €
Ubicación: Land-maximum punching force: 1000 kn
max radius: 760 mm
supporting table and range of punches and matrices
quick change device MAXIMUM PUNCHING FORCE: 1000 KN MAX RADIUS: 760 MM SUPPORTING TABLE AND RANGE OF PUNCHES AND MATRICES QUICK CHANGE DEVICE
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 550 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 14.800 €
Ubicación: Land-with a cutting force of 700 kn shear and punching, with satellite table and range of punches and dies WITH A CUTTING FORCE OF 700 KN SHEAR AND PUNCHING, WITH SATELLITE TABLE AND RANGE OF PUNCHES AND DIES
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 180 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-technical data:
-flat steel scissors - knife length 600 mm
-for flat stock 600 x 15 mm
- or 400 x 20 mm
-shear - l steel at 90 â° 160 x 13 mm
							at 45 â° 70 x 7 mm
					-t steel at 90 70 mm
-rod shear - steel 50 mm
					-square steel 50 mm
-notching device - for material up to 13 mm
-right lug, triangle notching up to 60 x 90 mm
	-hole punch - punching power approx.			1000 kn
	-infinitely variable stroke 0-70 mm
					-punches in steel up to 40 mm ã? 22 mm
					-throat depth 610 mm
	-hydraulic drive 400 v / 8.5 kw
	-space requirement approx.       	            b h 2400 x 1660 x 1200 mm
	-weight approx.					3200 kg
	-with:-e contact back fence
			-rest stop table square notchers
-div punch.
 TECHNICAL DATA: -FLAT STEEL SCISSORS - KNIFE LENGTH 600 MM -FOR FLAT STOCK 600 X 15 MM - OR 400 X 20 MM -SHEAR - L STEEL AT 90 &ACIRC;&DEG; 160 X 13 MM AT 45 &ACIRC;&DEG; 70 X 7 MM -T STEEL AT 90 70 MM -ROD SHEAR - STEEL 50 MM -SQUARE STEEL 50 MM -NOTCHING DEVICE - FOR MATERIAL UP TO 13 MM -RIGHT LUG, TRIANGLE NOTCHING UP TO 60 X 90 MM -HOLE PUNCH - PUNCHING POWER APPROX. 1000 KN -INFINITELY VARIABLE STROKE 0-70 MM -PUNCHES IN STEEL UP TO 40 MM &ATILDE;? 22 MM -THROAT DEPTH 610 MM -HYDRAULIC DRIVE 400 V / 8.5 KW -SPACE REQUIREMENT APPROX. B H 2400 X 1660 X 1200 MM -WEIGHT APPROX. 3200 KG -WITH:-E CONTACT BACK FENCE -REST STOP TABLE SQUARE NOTCHERS -DIV PUNCH.
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-hydraulic rod scissors mubea 51n /.
32 - 01-99-038
shipping time: immediately

id: 01-99-038

manufacturer: mubea
type: 51 n / 32

machine data
year of construction: 2000
l x w x h: approx. 1000 x 800 x 1500 mm
weight: approx. 400 kg

very good condition

technical data
hydraulic bar shears
shear performance of steel:
about: approx. ã? 28 mm

approximately 1 1/4 inches
square: approx. 28 mm

approximately 1 1/8 inches

flat: approx. 60 x 16 mm
approx. 2 1/4 x 5/8 inch

power supply: 230 & 380 volt
accessories

â?¢ hydraulic power unit

â?¢ movable on wheels

other accessories on request
price and other specifications on request HYDRAULIC ROD SCISSORS MUBEA 51N /. 32 - 01-99-038 SHIPPING TIME: IMMEDIATELY ID: 01-99-038 MANUFACTURER: MUBEA TYPE: 51 N / 32 MACHINE DATA YEAR OF CONSTRUCTION: 2000 L X W X H: APPROX. 1000 X 800 X 1500 MM WEIGHT: APPROX. 400 KG VERY GOOD CONDITION TECHNICAL DATA HYDRAULIC BAR SHEARS SHEAR PERFORMANCE OF STEEL: ABOUT: APPROX. &ATILDE;? 28 MM APPROXIMATELY 1 1/4 INCHES SQUARE: APPROX. 28 MM APPROXIMATELY 1 1/8 INCHES FLAT: APPROX. 60 X 16 MM APPROX. 2 1/4 X 5/8 INCH POWER SUPPLY: 230 & 380 VOLT ACCESSORIES &ACIRC;?&CENT; HYDRAULIC POWER UNIT &ACIRC;?&CENT; MOVABLE ON WHEELS OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Precio: 100 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 4.700 €
Ubicación: Land-very good well maintained condition, works perfectly.

can be tested like a tour.

shipping by self-organised forwarding is possible VERY GOOD WELL MAINTAINED CONDITION, WORKS PERFECTLY. CAN BE TESTED LIKE A TOUR. SHIPPING BY SELF-ORGANISED FORWARDING IS POSSIBLE
Vendedor: Geyer Edelstahl GmbH
Año de construcción: usado
Precio: 300 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-technical data:

-flat steel scissor cuts up to 240 mm x 13 mm
-shear cuts at 90 to 100 x 10 mm l steel
 						at 45 â° up to 70 x 8 mm
-rod steel scissors cuts steel up to 35 mm
					square steel up to 32 mm
-notching device with square notching device
	-hole punch - punching power 600 kn - throat depth 220 mm
				-punches in steel up to 30 mm ã? 15 mm
				-punches in steel up to 24 mm ã? 20 mm
-e. - contact stop - div. punch + matrices - e. - footswitch
	-drive 400 v / 4 kw
	-space requirement approx.		             b 540 x h 1800 x 920 mm
	-weight approx.						1200 kg
 TECHNICAL DATA: -FLAT STEEL SCISSOR CUTS UP TO 240 MM X 13 MM -SHEAR CUTS AT 90 TO 100 X 10 MM L STEEL AT 45 &ACIRC;&DEG; UP TO 70 X 8 MM -ROD STEEL SCISSORS CUTS STEEL UP TO 35 MM SQUARE STEEL UP TO 32 MM -NOTCHING DEVICE WITH SQUARE NOTCHING DEVICE -HOLE PUNCH - PUNCHING POWER 600 KN - THROAT DEPTH 220 MM -PUNCHES IN STEEL UP TO 30 MM &ATILDE;? 15 MM -PUNCHES IN STEEL UP TO 24 MM &ATILDE;? 20 MM -E. - CONTACT STOP - DIV. PUNCH + MATRICES - E. - FOOTSWITCH -DRIVE 400 V / 4 KW -SPACE REQUIREMENT APPROX. B 540 X H 1800 X 920 MM -WEIGHT APPROX. 1200 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 180 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-technical data:

-flat steel scissor cuts up to 150 x 10 mm
-shear - cuts - l steel at 90 â° to 80 x 8 mm
at 45 â° up to 70 x 8 mm
rod steel scissors - cut steel up to 30 mm
					square steel up to 28 mm
-notching device for triangular ausklingungen
	-hole punch - punching force 400 kn - throat depth 175 mm
				-punches in steel up to 25 mm ã? 11 mm
				-punches in steel up to 20 mm ã? 13 mm
-e - foot switch
-e - contact stop
-div. punch + matrices
	-drive 400 v / 4 kw
	-space requirement approx.		      b 540 x h 1740 x 920 mm
	-weight approx.						  850 kg
 TECHNICAL DATA: -FLAT STEEL SCISSOR CUTS UP TO 150 X 10 MM -SHEAR - CUTS - L STEEL AT 90 &ACIRC;&DEG; TO 80 X 8 MM AT 45 &ACIRC;&DEG; UP TO 70 X 8 MM ROD STEEL SCISSORS - CUT STEEL UP TO 30 MM SQUARE STEEL UP TO 28 MM -NOTCHING DEVICE FOR TRIANGULAR AUSKLINGUNGEN -HOLE PUNCH - PUNCHING FORCE 400 KN - THROAT DEPTH 175 MM -PUNCHES IN STEEL UP TO 25 MM &ATILDE;? 11 MM -PUNCHES IN STEEL UP TO 20 MM &ATILDE;? 13 MM -E - FOOT SWITCH -E - CONTACT STOP -DIV. PUNCH + MATRICES -DRIVE 400 V / 4 KW -SPACE REQUIREMENT APPROX. B 540 X H 1740 X 920 MM -WEIGHT APPROX. 850 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 220 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-punching force: 500kn, swing: 610mm, stroke: 0-60mm, punching diameter: 30mm, including various tools and roller conveyor.  PUNCHING FORCE: 500KN, SWING: 610MM, STROKE: 0-60MM, PUNCHING DIAMETER: 30MM, INCLUDING VARIOUS TOOLS AND ROLLER CONVEYOR.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 195 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-technical data:
-flat steel scissors - knife length 470 mm
-for flat stock 450 x 15 mm
- or 300 x 20 mm
-shear - l steel at 90 â° 140 x 13 mm
							at 45 â° 70 x 7 mm
					-t steel at 90 70 mm
-rod shear - steel 50 mm
					-square steel 42 mm
-notching device - rectangle notching 52 x 90 x 12 mm
	-hole punch - punching power approx.			  750 kn
	-infinitely variable stroke 0-70 mm
					-punches in steel up to 30 mm ã? 20 mm
					-unloading 510 mm
	-hydraulic drive 400 v / 7.5 kw
	-space requirement approx.       		b 1540 x h t 1660 x 740 mm
	-weight approx.					2200 kg
	-with: - 2 piece e - footswitch for two separate workstations
-rest stop table square notchers
-div punch.
 TECHNICAL DATA: -FLAT STEEL SCISSORS - KNIFE LENGTH 470 MM -FOR FLAT STOCK 450 X 15 MM - OR 300 X 20 MM -SHEAR - L STEEL AT 90 &ACIRC;&DEG; 140 X 13 MM AT 45 &ACIRC;&DEG; 70 X 7 MM -T STEEL AT 90 70 MM -ROD SHEAR - STEEL 50 MM -SQUARE STEEL 42 MM -NOTCHING DEVICE - RECTANGLE NOTCHING 52 X 90 X 12 MM -HOLE PUNCH - PUNCHING POWER APPROX. 750 KN -INFINITELY VARIABLE STROKE 0-70 MM -PUNCHES IN STEEL UP TO 30 MM &ATILDE;? 20 MM -UNLOADING 510 MM -HYDRAULIC DRIVE 400 V / 7.5 KW -SPACE REQUIREMENT APPROX. B 1540 X H T 1660 X 740 MM -WEIGHT APPROX. 2200 KG -WITH: - 2 PIECE E - FOOTSWITCH FOR TWO SEPARATE WORKSTATIONS -REST STOP TABLE SQUARE NOTCHERS -DIV PUNCH.
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 350 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-gebr. hydr. hole punch make mubea
	model hp 1000/760. no.: 167690255832 year of production 1990

to print power 100
	projection 760 mm
	hole 40 mm ã? 22 mm
	stepless stroke 70 mm
	stroke rate at 20 mm lift distance 40 / min
	motor kw 8.5
	external dimensions:
	width 800 mm
		2000 mm deep
		height 2000 mm
	weight approx.		3600 kg
starring: various stamping tools
		foot switch

GEBR. HYDR. HOLE PUNCH MAKE MUBEA MODEL HP 1000/760. NO.: 167690255832 YEAR OF PRODUCTION 1990 TO PRINT POWER 100 PROJECTION 760 MM HOLE 40 MM &ATILDE;? 22 MM STEPLESS STROKE 70 MM STROKE RATE AT 20 MM LIFT DISTANCE 40 / MIN MOTOR KW 8.5 EXTERNAL DIMENSIONS: WIDTH 800 MM 2000 MM DEEP HEIGHT 2000 MM WEIGHT APPROX. 3600 KG STARRING: VARIOUS STAMPING TOOLS FOOT SWITCH
Vendedor: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.
Año de construcción: usado
Ubicación: Land-round bar steel:30 mm<br/>square edge steel:25 mm<br/>l-beam:80 x 80 x 8 mm<br/>total power requirement:1,5 kw<br/>weight of the machine ca.:0,5 t<br/>dimensions of the machine ca.:1 x 1 x 1,2 m<br/><br/> ROUND BAR STEEL:30 MM
SQUARE EDGE STEEL:25 MM
L-BEAM:80 X 80 X 8 MM
TOTAL POWER REQUIREMENT:1,5 KW
WEIGHT OF THE MACHINE CA.:0,5 T
DIMENSIONS OF THE MACHINE CA.:1 X 1 X 1,2 M

Vendedor: Schiess-Moweg GmbH
Año de construcción: usado
Precio: 330 €
Ubicación: Land-DE Germany, 33335 Gütersloh
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-pressure: 110 t<br/>throat: 500 mm<br/>stroke: 34 mm<br/>control: 80 <br/>no. of strokes: 45 hub/min<br/>round bar steel: 40 mm<br/>plate thickness: 22 mm<br/>table-size: 800 x 500 mm<br/>: 995 <br/>total power requirement: 7,5 kw<br/>weight of the machine ca.: 2,6 t<br/>dimensions of the machine ca.: 1480 x 880 x 2150 m<br/>2-axis-coordinate-table with pneumatic workpiece clamping device<br/>with standard equipment<br/>u- and i-steel flange: 100 - 400 mm<br/>u-steel in support: 100 ? 400 mm<br/>i-steel in support: 100 ? 600 mm<br/>the machine ist mechanically ok. the control is not checked - it´s probably defect.<br/><br/><br/><br/><br/> PRESSURE: 110 T
THROAT: 500 MM
STROKE: 34 MM
CONTROL: 80
NO. OF STROKES: 45 HUB/MIN
ROUND BAR STEEL: 40 MM
PLATE THICKNESS: 22 MM
TABLE-SIZE: 800 X 500 MM
: 995
TOTAL POWER REQUIREMENT: 7,5 KW
WEIGHT OF THE MACHINE CA.: 2,6 T
DIMENSIONS OF THE MACHINE CA.: 1480 X 880 X 2150 M
2-AXIS-COORDINATE-TABLE WITH PNEUMATIC WORKPIECE CLAMPING DEVICE
WITH STANDARD EQUIPMENT
U- AND I-STEEL FLANGE: 100 - 400 MM
U-STEEL IN SUPPORT: 100 ? 400 MM
I-STEEL IN SUPPORT: 100 ? 600 MM
THE MACHINE IST MECHANICALLY OK. THE CONTROL IS NOT CHECKED - IT´S PROBABLY DEFECT.




Vendedor: WeMa A. Pigge GmbH
Año de construcción: usado
Precio: 8.700 €
Ubicación: Land-max. punching force: 550 kn<br/>  max. projection: 320 mm <br/>  further technical information on request<br/>  with set of punches and dies MAX. PUNCHING FORCE: 550 KN
MAX. PROJECTION: 320 MM
FURTHER TECHNICAL INFORMATION ON REQUEST
WITH SET OF PUNCHES AND DIES
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-round bar steel: 80 mm<br/>square edge steel: 70 mm<br/>pressing power: 400 t<br/>no. of strokes: 32 hub/min<br/>total power requirement: 7 kw<br/>weight of the machine ca.: 4 t<br/>dimensions of the machine ca.: 7,5 x 1 x 2 m<br/><br/><br/><br/><br/> ROUND BAR STEEL: 80 MM
SQUARE EDGE STEEL: 70 MM
PRESSING POWER: 400 T
NO. OF STROKES: 32 HUB/MIN
TOTAL POWER REQUIREMENT: 7 KW
WEIGHT OF THE MACHINE CA.: 4 T
DIMENSIONS OF THE MACHINE CA.: 7,5 X 1 X 2 M




Vendedor: Wirths GmbH, Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-performance: diam.: max 30 mm, l 100 x 12 mm, el / mech, 1.5 kw, 500 kg; operationally PERFORMANCE: DIAM.: MAX 30 MM, L 100 X 12 MM, EL / MECH, 1.5 KW, 500 KG; OPERATIONALLY
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-round bar steel: 45* mm<br/>square edge steel: 42* mm<br/>l-beam: 130 x 13 mm<br/>notching: rectangle tool: 14 x 30 x 55 mm<br/>weight of the machine ca.: 3,5 t<br/><br/><br/><br/><br/> ROUND BAR STEEL: 45* MM
SQUARE EDGE STEEL: 42* MM
L-BEAM: 130 X 13 MM
NOTCHING: RECTANGLE TOOL: 14 X 30 X 55 MM
WEIGHT OF THE MACHINE CA.: 3,5 T




Vendedor: WeMa A. Pigge GmbH
Año de construcción: usado
Precio: 13.800 €
Ubicación: Land-maximum punching force: 100 t<br/>  <br/>  maximum throat depth: 340 mm<br/>  <br/>  with set of punches and matrices MAXIMUM PUNCHING FORCE: 100 T

MAXIMUM THROAT DEPTH: 340 MM

WITH SET OF PUNCHES AND MATRICES
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-round bar steel: 30 mm<br/>square edge steel: 28 mm<br/>l-beam: 80 x 8, 80 x 65 x 8 mm<br/>stroke: 0 - 30 mm<br/>hole diameter  -setting by hand: 30 x 10, 20 x 15 mm<br/>throat: 175 mm<br/>plate thickness: 8 mm<br/>flat steel: 150 x 10 mm<br/>: 60 x 6 mm<br/>work height max.: 1055 mm<br/>pressure: 40 t<br/>total power requirement: 4 kw<br/>weight of the machine ca.: 0,81 t<br/>dimensions of the machine ca.: 1,0 x 0,65 x 1,75 m<br/>stam tools:  <br/><br/><br/><br/><br/> ROUND BAR STEEL: 30 MM
SQUARE EDGE STEEL: 28 MM
L-BEAM: 80 X 8, 80 X 65 X 8 MM
STROKE: 0 - 30 MM
HOLE DIAMETER -SETTING BY HAND: 30 X 10, 20 X 15 MM
THROAT: 175 MM
PLATE THICKNESS: 8 MM
FLAT STEEL: 150 X 10 MM
: 60 X 6 MM
WORK HEIGHT MAX.: 1055 MM
PRESSURE: 40 T
TOTAL POWER REQUIREMENT: 4 KW
WEIGHT OF THE MACHINE CA.: 0,81 T
DIMENSIONS OF THE MACHINE CA.: 1,0 X 0,65 X 1,75 M
STAM TOOLS:




Vendedor: Sperling Werkzeugmaschinen
Año de construcción: usado
Precio: 9.900 €
Ubicación: Land-800 kn punch and shear performance<br/>  <br/>  1 central carriage, 5 work stations, very compact design<br/>  <br/>  complete with tool's desire.<br/>  <br/>  more technical specifications see photo 4 or on request<br/>  <br/>  weight: 1200 kg 800 KN PUNCH AND SHEAR PERFORMANCE

1 CENTRAL CARRIAGE, 5 WORK STATIONS, VERY COMPACT DESIGN

COMPLETE WITH TOOL'S DESIRE.

MORE TECHNICAL SPECIFICATIONS SEE PHOTO 4 OR ON REQUEST

WEIGHT: 1200 KG
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 5.800 €
Ubicación: Land-round bar steel: 50 mm<br/>square edge steel: 45 mm<br/>l-beam: 90x11 mm<br/>punching capacity: 800 kn<br/>flat steel: 70x30 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> ROUND BAR STEEL: 50 MM
SQUARE EDGE STEEL: 45 MM
L-BEAM: 90X11 MM
PUNCHING CAPACITY: 800 KN
FLAT STEEL: 70X30 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Gromag AG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)