10 ofertas

Año de construcción: usado
Precio: 17.900 €
Ubicación: Land-control: epl 1
turning diameter over bed: 710 mm
"" support 350 mm
plan route 400 mm
turning length 3000 mm
spindle bore 103 mm
power 22 kw
4 x automatically switch gear (via m-function)
tailstock diameter 100 mm
quill way 225 mm
taper in spindle mk 5
fixed lynette passage up to 270 mm
spidelkopfgrã¶ã?e din 55022
chucks 3-jaw hand chuck 400 mm forkhardt f 400
wekzeugtrã¤ger front prepared for recording a multifix size d (muti fix is not included)
rear sauter 4-head turret size 25 ng 32
panel spã¤nerã¼ckwand over the whole length of protective door front, width 1900 mm
weight: approx. 6500 kg

additional information:
without chip conveyor, 2 chip trays with tank and pump,.
control panel directly on the machine
age-related wear in leadership and bed
single-layered occupied, machine was overhauled in 1993 geometric

CONTROL: EPL 1 TURNING DIAMETER OVER BED: 710 MM "" SUPPORT 350 MM PLAN ROUTE 400 MM TURNING LENGTH 3000 MM SPINDLE BORE 103 MM POWER 22 KW 4 X AUTOMATICALLY SWITCH GEAR (VIA M-FUNCTION) TAILSTOCK DIAMETER 100 MM QUILL WAY 225 MM TAPER IN SPINDLE MK 5 FIXED LYNETTE PASSAGE UP TO 270 MM SPIDELKOPFGRö�E DIN 55022 CHUCKS 3-JAW HAND CHUCK 400 MM FORKHARDT F 400 WEKZEUGTRäGER FRONT PREPARED FOR RECORDING A MULTIFIX SIZE D (MUTI FIX IS NOT INCLUDED) REAR SAUTER 4-HEAD TURRET SIZE 25 NG 32 PANEL SPäNERüCKWAND OVER THE WHOLE LENGTH OF PROTECTIVE DOOR FRONT, WIDTH 1900 MM WEIGHT: APPROX. 6500 KG ADDITIONAL INFORMATION: WITHOUT CHIP CONVEYOR, 2 CHIP TRAYS WITH TANK AND PUMP,. CONTROL PANEL DIRECTLY ON THE MACHINE AGE-RELATED WEAR IN LEADERSHIP AND BED SINGLE-LAYERED OCCUPIED, MACHINE WAS OVERHAULED IN 1993 GEOMETRIC
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: used machinery auction RESALE 260 €
Ubicación: Land-weight approx.: 700 kg<br/>dimensions (l x w x h) approx.: 1450 x 1400 x 1350 mm<br/>description: ? horizontal chisel mortiser<br> ? table size 1000 x 310 mm<br> ? table longitudinal travel 400 mm<br> ? maximum head travel approx. 150 mm<br> ? working depth max. approx. 130 mm<br> ? height max. adjustment approx. 100 mm<br> ? head motor 2.20 kw<br> ? hydraulic pump motor 0.75 kw<br> ? automatic and manual mode with movements by a joystick WEIGHT APPROX.: 700 KG
DIMENSIONS (L X W X H) APPROX.: 1450 X 1400 X 1350 MM
DESCRIPTION: ? HORIZONTAL CHISEL MORTISER
? TABLE SIZE 1000 X 310 MM
? TABLE LONGITUDINAL TRAVEL 400 MM
? MAXIMUM HEAD TRAVEL APPROX. 150 MM
? WORKING DEPTH MAX. APPROX. 130 MM
? HEIGHT MAX. ADJUSTMENT APPROX. 100 MM
? HEAD MOTOR 2.20 KW
? HYDRAULIC PUMP MOTOR 0.75 KW
? AUTOMATIC AND MANUAL MODE WITH MOVEMENTS BY A JOYSTICK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-nc control: grundig with contour program
turning diameter over bed: 500 mm, over cross slide: 290 mm.
centre distance: 1500 mm, spindle bore: 70 mm.
spindle speed: 8-2800 rpm.
spindle power: 11 kw.
incl. 3 jaw wedge bar chucks f 315 with various jaws,.
quick change toolpost muti fix gr. c with various pocket,.
tailstock mk 5, coolant system
and documentation.
the machine can be seen under power and is immediately available. NC CONTROL: GRUNDIG WITH CONTOUR PROGRAM TURNING DIAMETER OVER BED: 500 MM, OVER CROSS SLIDE: 290 MM. CENTRE DISTANCE: 1500 MM, SPINDLE BORE: 70 MM. SPINDLE SPEED: 8-2800 RPM. SPINDLE POWER: 11 KW. INCL. 3 JAW WEDGE BAR CHUCKS F 315 WITH VARIOUS JAWS,. QUICK CHANGE TOOLPOST MUTI FIX GR. C WITH VARIOUS POCKET,. TAILSTOCK MK 5, COOLANT SYSTEM AND DOCUMENTATION. THE MACHINE CAN BE SEEN UNDER POWER AND IS IMMEDIATELY AVAILABLE.
Vendedor: EBM Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 260 €
Ubicación: Land-weight approx.: 700 kg<br/>dimensions (l x w x h) approx.: 1450 x 1450 x 1350 mm<br/>description: ? horizontal chisel mortiser<br> ? serial number 900602<br> ? table size 1000 x 280 mm<br> ? table longitudinal travel 400 mm<br> ? maximum head travel approx. 150 mm<br> ? working depth max. approx. 130 mm<br> ? height max. adjustment approx. 100 mm<br> ? head motor 2.20 kw<br> ? hydraulic pump motor 0.75 kw<br> ? automatic and manual mode with movements by a joystick WEIGHT APPROX.: 700 KG
DIMENSIONS (L X W X H) APPROX.: 1450 X 1450 X 1350 MM
DESCRIPTION: ? HORIZONTAL CHISEL MORTISER
? SERIAL NUMBER 900602
? TABLE SIZE 1000 X 280 MM
? TABLE LONGITUDINAL TRAVEL 400 MM
? MAXIMUM HEAD TRAVEL APPROX. 150 MM
? WORKING DEPTH MAX. APPROX. 130 MM
? HEIGHT MAX. ADJUSTMENT APPROX. 100 MM
? HEAD MOTOR 2.20 KW
? HYDRAULIC PUMP MOTOR 0.75 KW
? AUTOMATIC AND MANUAL MODE WITH MOVEMENTS BY A JOYSTICK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-din 2080 and din 69871<br><br>weldon holder<br>cylindric holder with keyway<br>mk holder<br>mk holder with tightening screw<br>kaiser holder<br>muti bore<br>collet chuck er<br>collet chuck oz<br>drill chuck<br>multi purpose attachment bolts<br>screw quick-action chucks<br>blanks DIN 2080 AND DIN 69871

WELDON HOLDER
CYLINDRIC HOLDER WITH KEYWAY
MK HOLDER
MK HOLDER WITH TIGHTENING SCREW
KAISER HOLDER
MUTI BORE
COLLET CHUCK ER
COLLET CHUCK OZ
DRILL CHUCK
MULTI PURPOSE ATTACHMENT BOLTS
SCREW QUICK-ACTION CHUCKS
BLANKS
Vendedor: Theo Stefan OG
Año de construcción: usado
Ubicación: Land-technical specifications:vertical chisel mortiser automaticscrolling cylinder head on rail with needle rollerautomatic loocking longitudinal chassispneumatic lockingcast iron basemotor hp.3 v.380 50hzforward protection crankcase manual descent cylinder head TECHNICAL SPECIFICATIONS:VERTICAL CHISEL MORTISER AUTOMATICSCROLLING CYLINDER HEAD ON RAIL WITH NEEDLE ROLLERAUTOMATIC LOOCKING LONGITUDINAL CHASSISPNEUMATIC LOCKINGCAST IRON BASEMOTOR HP.3 V.380 50HZFORWARD PROTECTION CRANKCASE MANUAL DESCENT CYLINDER HEAD
Vendedor: Mercator S.R.L.
Año de construcción: usado
Ubicación: Land-general characteristics  
Ø over bed  600 mm.  
distance between points  1500 mm.  
maximum length of turning  1.500 mm  
interior Ø spindle  50 mm.  
number of spindle speeds  18  
Ø dish  250 mm.  
Ø over carriage  300 mm.  
dimensions and weights  
high  1400 mm.  
long  3000 mm.  
width  1000 mm.  
electrical characteristics  
total power  12,5 cv  
other features  
included accessories  luneta  
 GENERAL CHARACTERISTICS Ø OVER BED 600 MM. DISTANCE BETWEEN POINTS 1500 MM. MAXIMUM LENGTH OF TURNING 1.500 MM INTERIOR Ø SPINDLE 50 MM. NUMBER OF SPINDLE SPEEDS 18 Ø DISH 250 MM. Ø OVER CARRIAGE 300 MM. DIMENSIONS AND WEIGHTS HIGH 1400 MM. LONG 3000 MM. WIDTH 1000 MM. ELECTRICAL CHARACTERISTICS TOTAL POWER 12,5 CV OTHER FEATURES INCLUDED ACCESSORIES LUNETA
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-general characteristics  
Ø over bed  575 mm  
distance between points  2.000 mm  
maximum length of turning  2.000 mm  
interior Ø spindle  51 mm  
Ø dish  350 mm  
Ø over carriage  525 mm  
dimensions and weights  
high  2.100mm  
long  3.400mm  
weight  2,200 kg  
width  1.010mm  
electrical characteristics  
total power  12.5 cv  
voltage  220/380 v  
other features  
included accessories  normativa ce,visualizador de cotas sony, plato de tres garras de 350 mm, plato de 4 garras autocentrante de Ø 250 mm, plato liso de Ø 300 mm, luz incorporada, motor de avance rápido, luneta fija,torreta de cambio rápido, portaherramienta de cambio rápido, plaquitas de metal duro con sus portaherramientas,  
url youtube  abc://youtu.be/ijd92pngulo  
 GENERAL CHARACTERISTICS Ø OVER BED 575 MM DISTANCE BETWEEN POINTS 2.000 MM MAXIMUM LENGTH OF TURNING 2.000 MM INTERIOR Ø SPINDLE 51 MM Ø DISH 350 MM Ø OVER CARRIAGE 525 MM DIMENSIONS AND WEIGHTS HIGH 2.100MM LONG 3.400MM WEIGHT 2,200 KG WIDTH 1.010MM ELECTRICAL CHARACTERISTICS TOTAL POWER 12.5 CV VOLTAGE 220/380 V OTHER FEATURES INCLUDED ACCESSORIES NORMATIVA CE,VISUALIZADOR DE COTAS SONY, PLATO DE TRES GARRAS DE 350 MM, PLATO DE 4 GARRAS AUTOCENTRANTE DE Ø 250 MM, PLATO LISO DE Ø 300 MM, LUZ INCORPORADA, MOTOR DE AVANCE RáPIDO, LUNETA FIJA,TORRETA DE CAMBIO RáPIDO, PORTAHERRAMIENTA DE CAMBIO RáPIDO, PLAQUITAS DE METAL DURO CON SUS PORTAHERRAMIENTAS, URL YOUTUBE ABC://YOUTU.BE/IJD92PNGULO
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-general characteristics  
Ø over bed  500  
distance between points  750 mm  
maximum length of turning  750 mm  
interior Ø spindle  50 mm  
Ø dish  250 mm  
Ø over carriage  448  
dimensions and weights  
high  1.295 mm  
long  2.155 mm  
weight  1.750 kg  
width  1.175 mm  
electrical characteristics  
total power  12.5 cv  
voltage  220/380 v  
other features  
included accessories  plato de 4 garras de 400mm. plato de 3 garras de 250mm, herramientas/4 claws dish 400mm. 3-jaw chuck 250mm, tools  
year  1978  
 GENERAL CHARACTERISTICS Ø OVER BED 500 DISTANCE BETWEEN POINTS 750 MM MAXIMUM LENGTH OF TURNING 750 MM INTERIOR Ø SPINDLE 50 MM Ø DISH 250 MM Ø OVER CARRIAGE 448 DIMENSIONS AND WEIGHTS HIGH 1.295 MM LONG 2.155 MM WEIGHT 1.750 KG WIDTH 1.175 MM ELECTRICAL CHARACTERISTICS TOTAL POWER 12.5 CV VOLTAGE 220/380 V OTHER FEATURES INCLUDED ACCESSORIES PLATO DE 4 GARRAS DE 400MM. PLATO DE 3 GARRAS DE 250MM, HERRAMIENTAS/4 CLAWS DISH 400MM. 3-JAW CHUCK 250MM, TOOLS YEAR 1978
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-general characteristics  
Ø over bed  500  
distance between points  750 mm  
maximum length of turning  750 mm  
interior Ø spindle  50 mm  
Ø dish  250 mm  
Ø over carriage  448  
dimensions and weights  
high  1295 mm  
long  2155 mm  
weight  1750 kg  
width  1175 mm  
electrical characteristics  
total power  12,5 cv  
voltage  220/380 v  
other features  
included accessories  copiador hidráulico, plato autocentrante de 4 garras, contrapunto neúmatico / hydraulic copying, chuck plate 4 claws, pneumatic counterpoint  
  GENERAL CHARACTERISTICS Ø OVER BED 500 DISTANCE BETWEEN POINTS 750 MM MAXIMUM LENGTH OF TURNING 750 MM INTERIOR Ø SPINDLE 50 MM Ø DISH 250 MM Ø OVER CARRIAGE 448 DIMENSIONS AND WEIGHTS HIGH 1295 MM LONG 2155 MM WEIGHT 1750 KG WIDTH 1175 MM ELECTRICAL CHARACTERISTICS TOTAL POWER 12,5 CV VOLTAGE 220/380 V OTHER FEATURES INCLUDED ACCESSORIES COPIADOR HIDRáULICO, PLATO AUTOCENTRANTE DE 4 GARRAS, CONTRAPUNTO NEúMATICO / HYDRAULIC COPYING, CHUCK PLATE 4 CLAWS, PNEUMATIC COUNTERPOINT
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MUTI types: