45 ofertas

Año de construcción: usado
Precio: 890 €
Ubicación: Land-manufacturer: fa. bauer
type: fb 1500 and 2 pcs. cover

condition: used
the folding bottom container was only 1 year in use and is almost new.

technical data:
for collecting, storing and transferring valuable materials. steel construction with smooth inner walls. unlocking the bottom flap by cable from the truck seat. a rubber suspension dampens jerky knocking down of the bottom flap during the emptying process. bottom flap closes automatically when putting on. securing against unintentional slipping and tipping. shooting for forklift and crane. 100 mm under ride height - transportable by pallet truck. with 4 crane eyelets (ø 40 mm). 3-fold stackable. retractable bracket suitable for fork cross section 185 x 75 mm, fork spacing: content 0.5 - 1.0 cbm = 415 mm, capacity 1.5 - 2.0 cbm = 615 mm.

with built-2-piece lid, which allows the shut-off of the container.

tine length at least 1100 mm
finish: green paint (ral 6011) according to en iso 1461


1.50 m³ (fb 1500)
dimensions: l 1000 x w 1800 x h 1160 mm
load capacity: 1500 kg
weight: approx. 202 kg

(current original price € 1.350 incl vat)

sales price € 890 incl. vat MANUFACTURER: FA. BAUER TYPE: FB 1500 AND 2 PCS. COVER CONDITION: USED THE FOLDING BOTTOM CONTAINER WAS ONLY 1 YEAR IN USE AND IS ALMOST NEW. TECHNICAL DATA: FOR COLLECTING, STORING AND TRANSFERRING VALUABLE MATERIALS. STEEL CONSTRUCTION WITH SMOOTH INNER WALLS. UNLOCKING THE BOTTOM FLAP BY CABLE FROM THE TRUCK SEAT. A RUBBER SUSPENSION DAMPENS JERKY KNOCKING DOWN OF THE BOTTOM FLAP DURING THE EMPTYING PROCESS. BOTTOM FLAP CLOSES AUTOMATICALLY WHEN PUTTING ON. SECURING AGAINST UNINTENTIONAL SLIPPING AND TIPPING. SHOOTING FOR FORKLIFT AND CRANE. 100 MM UNDER RIDE HEIGHT - TRANSPORTABLE BY PALLET TRUCK. WITH 4 CRANE EYELETS (ø 40 MM). 3-FOLD STACKABLE. RETRACTABLE BRACKET SUITABLE FOR FORK CROSS SECTION 185 X 75 MM, FORK SPACING: CONTENT 0.5 - 1.0 CBM = 415 MM, CAPACITY 1.5 - 2.0 CBM = 615 MM. WITH BUILT-2-PIECE LID, WHICH ALLOWS THE SHUT-OFF OF THE CONTAINER. TINE LENGTH AT LEAST 1100 MM FINISH: GREEN PAINT (RAL 6011) ACCORDING TO EN ISO 1461 1.50 M³ (FB 1500) DIMENSIONS: L 1000 X W 1800 X H 1160 MM LOAD CAPACITY: 1500 KG WEIGHT: APPROX. 202 KG (CURRENT ORIGINAL PRICE € 1.350 INCL VAT) SALES PRICE € 890 INCL. VAT
Vendedor: IPV GmbH
Año de construcción: usado
Ubicación: Land-spindle taper:spannzange/collet <br/>spindle stroke:100 mm<br/>number of spindles:11 stück<br/>number of stations:9 stück<br/>cycle time:2 - 12  sec<br/>revolutions per minute:bohren/drill/taladrar 745...2180 u/min.<br/>revolutions per minute:gewinden/threading/roscar 185...350 u/min.<br/>feed:0-1 m/min<br/>total power requirement:ca. 15 kw<br/>weight of the machine ca.:4,5 t<br/>space requirement of the machine approx.:3,0 x 8,0 x 2,5 m<br/>dimensions of machine:2,5 x 2,5 x 2,5 m<br/><br/>the machine has been constructed for the metal cutting process of workpieces in one clamping session.  first step ist the cutting of the work piece from the bar which is coming from the iemca bar loader t 560/40p    technical description of a workpiece which is epuiped at the machine at the moment:  processing units:  station 1 bucking of the bar material coming from the bar loader  station 2 piecing of cone station 3 milling 1 various station 4 milling 2 various station 5 milling 3 various station 6 piecing of cone station 7 thread milling station 8 free / no working station 9 cross bore station 10 free / no working station 11 grinding station 12 knock out     machine is equipped with a feeding-and unloading unit for workpieces.   incl. chip conveyer with magnetic absorber  incl. filter mist system incl. full machine cover iemca loader t 560/ 40 p dia max 40 mm   SPINDLE TAPER:SPANNZANGE/COLLET
SPINDLE STROKE:100 MM
NUMBER OF SPINDLES:11 STüCK
NUMBER OF STATIONS:9 STüCK
CYCLE TIME:2 - 12 SEC
REVOLUTIONS PER MINUTE:BOHREN/DRILL/TALADRAR 745...2180 U/MIN.
REVOLUTIONS PER MINUTE:GEWINDEN/THREADING/ROSCAR 185...350 U/MIN.
FEED:0-1 M/MIN
TOTAL POWER REQUIREMENT:CA. 15 KW
WEIGHT OF THE MACHINE CA.:4,5 T
SPACE REQUIREMENT OF THE MACHINE APPROX.:3,0 X 8,0 X 2,5 M
DIMENSIONS OF MACHINE:2,5 X 2,5 X 2,5 M

THE MACHINE HAS BEEN CONSTRUCTED FOR THE METAL CUTTING PROCESS OF WORKPIECES IN ONE CLAMPING SESSION. FIRST STEP IST THE CUTTING OF THE WORK PIECE FROM THE BAR WHICH IS COMING FROM THE IEMCA BAR LOADER T 560/40P TECHNICAL DESCRIPTION OF A WORKPIECE WHICH IS EPUIPED AT THE MACHINE AT THE MOMENT: PROCESSING UNITS: STATION 1 BUCKING OF THE BAR MATERIAL COMING FROM THE BAR LOADER STATION 2 PIECING OF CONE STATION 3 MILLING 1 VARIOUS STATION 4 MILLING 2 VARIOUS STATION 5 MILLING 3 VARIOUS STATION 6 PIECING OF CONE STATION 7 THREAD MILLING STATION 8 FREE / NO WORKING STATION 9 CROSS BORE STATION 10 FREE / NO WORKING STATION 11 GRINDING STATION 12 KNOCK OUT MACHINE IS EQUIPPED WITH A FEEDING-AND UNLOADING UNIT FOR WORKPIECES. INCL. CHIP CONVEYER WITH MAGNETIC ABSORBER INCL. FILTER MIST SYSTEM INCL. FULL MACHINE COVER IEMCA LOADER T 560/ 40 P DIA MAX 40 MM
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-the machine is technically flawless and every day for small series in use. it runs maximum single-layered and the a few days a week. 

sales reason is: we need a machine with more food and more swing. it has shown in the past that we have to produce more and more larger parts and the machine we are no longer appropriate. 

the machine was purchased 3 years ago from us. the control panel is in italian control language in german (the operation is still easily). in time, we have had to perform regular maintenance. several components were renewed in the time. it was repaired a tax map, the servo motor changed the revolver (new part used for 5000 euros), performed a software update and control battery replacement. thus one can say that the machine in a technical top is. nothing is knocked out or has game. it is also highly accurate â?? we produce area it normally in the 1/100. all guides are in top condition. spindle runs totally quietly up to 5000 1/min. optical condition is of course used. 
bdpmgenest

the machine has no maintenance storage and is ready for use. 

manuals are complete. machine comes complete with many vdi30 halter, sold chip conveyors and multiple set of jaws. tools are not included.  THE MACHINE IS TECHNICALLY FLAWLESS AND EVERY DAY FOR SMALL SERIES IN USE. IT RUNS MAXIMUM SINGLE-LAYERED AND THE A FEW DAYS A WEEK. SALES REASON IS: WE NEED A MACHINE WITH MORE FOOD AND MORE SWING. IT HAS SHOWN IN THE PAST THAT WE HAVE TO PRODUCE MORE AND MORE LARGER PARTS AND THE MACHINE WE ARE NO LONGER APPROPRIATE. THE MACHINE WAS PURCHASED 3 YEARS AGO FROM US. THE CONTROL PANEL IS IN ITALIAN CONTROL LANGUAGE IN GERMAN (THE OPERATION IS STILL EASILY). IN TIME, WE HAVE HAD TO PERFORM REGULAR MAINTENANCE. SEVERAL COMPONENTS WERE RENEWED IN THE TIME. IT WAS REPAIRED A TAX MAP, THE SERVO MOTOR CHANGED THE REVOLVER (NEW PART USED FOR 5000 EUROS), PERFORMED A SOFTWARE UPDATE AND CONTROL BATTERY REPLACEMENT. THUS ONE CAN SAY THAT THE MACHINE IN A TECHNICAL TOP IS. NOTHING IS KNOCKED OUT OR HAS GAME. IT IS ALSO HIGHLY ACCURATE &ACIRC;?? WE PRODUCE AREA IT NORMALLY IN THE 1/100. ALL GUIDES ARE IN TOP CONDITION. SPINDLE RUNS TOTALLY QUIETLY UP TO 5000 1/MIN. OPTICAL CONDITION IS OF COURSE USED. BDPMGENEST THE MACHINE HAS NO MAINTENANCE STORAGE AND IS READY FOR USE. MANUALS ARE COMPLETE. MACHINE COMES COMPLETE WITH MANY VDI30 HALTER, SOLD CHIP CONVEYORS AND MULTIPLE SET OF JAWS. TOOLS ARE NOT INCLUDED.
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-metering screw, make brabender technologie, type ddw md6-fw80/3plus-200, no 03035306907, new 2004, material stainless steel, screw diameter 80mm, pitch +/-40mm, screw length +/- 500mm, hopper sizes +/-500x600mm x 500mm, inlet dia. 450mm, outlet dia. 200mm, with motor (ex.) 0,55 kw 230/400 volt, with knocker, hopper with flexible wall, mounted on frame, with switch, floorspace 1,3x0,8m, total height 1,3m, weight 260kgmetering screwsconveyor screws > metering screws METERING SCREW, MAKE BRABENDER TECHNOLOGIE, TYPE DDW MD6-FW80/3PLUS-200, NO 03035306907, NEW 2004, MATERIAL STAINLESS STEEL, SCREW DIAMETER 80MM, PITCH +/-40MM, SCREW LENGTH +/- 500MM, HOPPER SIZES +/-500X600MM X 500MM, INLET DIA. 450MM, OUTLET DIA. 200MM, WITH MOTOR (EX.) 0,55 KW 230/400 VOLT, WITH KNOCKER, HOPPER WITH FLEXIBLE WALL, MOUNTED ON FRAME, WITH SWITCH, FLOORSPACE 1,3X0,8M, TOTAL HEIGHT 1,3M, WEIGHT 260KGMETERING SCREWSCONVEYOR SCREWS > METERING SCREWS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land- nominal effort 1600 ton 
slide stroke 180 mm 
number of strokes per minute 25 
single stroke per minute 16 
shut height 510 mm 
bolster plate-to-ram adjustable stroke 16 
table size 1000?1000 mm 
slide dimensions 860?900 mm 
bolster plate thickness 160 mm 
lower knockout   
stroke 110 mm 
force 500 kn 
upper knockout   
stroke 16 mm 
force 160 kn 
main motor 60 kw 
overall dimensions 3480x2600x4110 mm 
weight 45 ton 
 NOMINAL EFFORT 1600 TON SLIDE STROKE 180 MM NUMBER OF STROKES PER MINUTE 25 SINGLE STROKE PER MINUTE 16 SHUT HEIGHT 510 MM BOLSTER PLATE-TO-RAM ADJUSTABLE STROKE 16 TABLE SIZE 1000?1000 MM SLIDE DIMENSIONS 860?900 MM BOLSTER PLATE THICKNESS 160 MM LOWER KNOCKOUT STROKE 110 MM FORCE 500 KN UPPER KNOCKOUT STROKE 16 MM FORCE 160 KN MAIN MOTOR 60 KW OVERALL DIMENSIONS 3480X2600X4110 MM WEIGHT 45 TON
Vendedor: Kipling Holding
Año de construcción: usado
Ubicación: Land-metering screw, make brabender technologie, type ddw-md6-fw80/3 plus-300, no 03035306887, new 2004, material stainless steel, screw diameter 80mm, pitch 45-100mm, screw length +/-500mm, hopper sizes 600x500mm x500mm, inlet +/-  dia. 200mm, outlet +/- dia. 200mm, with motor 0,55kw 230/400 volt (ex), with knocker, hopper with flexible wall, mounted on frame, with switch , floorspace 1,3x0,8mm, total height 1,3m, weight 250kgmetering screwsconveyor screws > metering screws METERING SCREW, MAKE BRABENDER TECHNOLOGIE, TYPE DDW-MD6-FW80/3 PLUS-300, NO 03035306887, NEW 2004, MATERIAL STAINLESS STEEL, SCREW DIAMETER 80MM, PITCH 45-100MM, SCREW LENGTH +/-500MM, HOPPER SIZES 600X500MM X500MM, INLET +/- DIA. 200MM, OUTLET +/- DIA. 200MM, WITH MOTOR 0,55KW 230/400 VOLT (EX), WITH KNOCKER, HOPPER WITH FLEXIBLE WALL, MOUNTED ON FRAME, WITH SWITCH , FLOORSPACE 1,3X0,8MM, TOTAL HEIGHT 1,3M, WEIGHT 250KGMETERING SCREWSCONVEYOR SCREWS > METERING SCREWS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-it is a used reconditioned rego mixing and sttirring machine sm 2 (20 litres) for sale. the speed of the machine is adjustable. with automatic discharge of the clock, boiler height adjustment crank revolution. electrical conversion of striking on stirring, genuine knocking out stationary shaft.
the machine has a new agitator, was completely stored and painted. it is in very good condition and runs very quietly. including boiler, stirring, whisk.
videos from the trial run can be sent on request.

price on request. 
 IT IS A USED RECONDITIONED REGO MIXING AND STTIRRING MACHINE SM 2 (20 LITRES) FOR SALE. THE SPEED OF THE MACHINE IS ADJUSTABLE. WITH AUTOMATIC DISCHARGE OF THE CLOCK, BOILER HEIGHT ADJUSTMENT CRANK REVOLUTION. ELECTRICAL CONVERSION OF STRIKING ON STIRRING, GENUINE KNOCKING OUT STATIONARY SHAFT. THE MACHINE HAS A NEW AGITATOR, WAS COMPLETELY STORED AND PAINTED. IT IS IN VERY GOOD CONDITION AND RUNS VERY QUIETLY. INCLUDING BOILER, STIRRING, WHISK. VIDEOS FROM THE TRIAL RUN CAN BE SENT ON REQUEST. PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-metering screw, make brabender technologie, type sackschütte mit fw80 /3plus, no 03035306900, new 2004, material stainless steel, screw diameter 80mm, screw length 500mm +/-, hopper sizes +/- 600x500mm x1000mm, inlet dia. 210mm, outlet dia. 160mm, with motor 0,55kw 230/400 volt, with knocker, hopper with flexible wall, mounted on frame, floorspace 1,6x0,7m, total height 1,5m, weight 180kgmetering screwsconveyor screws > metering screws METERING SCREW, MAKE BRABENDER TECHNOLOGIE, TYPE SACKSCHüTTE MIT FW80 /3PLUS, NO 03035306900, NEW 2004, MATERIAL STAINLESS STEEL, SCREW DIAMETER 80MM, SCREW LENGTH 500MM +/-, HOPPER SIZES +/- 600X500MM X1000MM, INLET DIA. 210MM, OUTLET DIA. 160MM, WITH MOTOR 0,55KW 230/400 VOLT, WITH KNOCKER, HOPPER WITH FLEXIBLE WALL, MOUNTED ON FRAME, FLOORSPACE 1,6X0,7M, TOTAL HEIGHT 1,5M, WEIGHT 180KGMETERING SCREWSCONVEYOR SCREWS > METERING SCREWS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-availability: as of now
replacement knife: 10
discharge fleece gloves: approx. 10
condition: well-kept

high-precision transport roller without annular (blade roller) and spring mounted knife holder for very low losses of expensive discharge non-woven material
dynamic (counter current) stainless steel cleaning roller and nock air-jet compressed air cleaning system permanently keep the transport roller during operation. this always-reliable access, fast and easy work and very good industrial hygiene.
knife holder with captive screws
blade gap adjustment for products with thick fleece (e.g. beef) pressure regulator adjustable
tank of sections from the front and from the rear suppliable
height-adjustable, ergonomic safety foot switch bar 15 mm thick nock power plates® in the housing for long-lasting precision and great service
table-safety switch
lockable swivel wheels
stainless steel  AVAILABILITY: AS OF NOW REPLACEMENT KNIFE: 10 DISCHARGE FLEECE GLOVES: APPROX. 10 CONDITION: WELL-KEPT HIGH-PRECISION TRANSPORT ROLLER WITHOUT ANNULAR (BLADE ROLLER) AND SPRING MOUNTED KNIFE HOLDER FOR VERY LOW LOSSES OF EXPENSIVE DISCHARGE NON-WOVEN MATERIAL DYNAMIC (COUNTER CURRENT) STAINLESS STEEL CLEANING ROLLER AND NOCK AIR-JET COMPRESSED AIR CLEANING SYSTEM PERMANENTLY KEEP THE TRANSPORT ROLLER DURING OPERATION. THIS ALWAYS-RELIABLE ACCESS, FAST AND EASY WORK AND VERY GOOD INDUSTRIAL HYGIENE. KNIFE HOLDER WITH CAPTIVE SCREWS BLADE GAP ADJUSTMENT FOR PRODUCTS WITH THICK FLEECE (E.G. BEEF) PRESSURE REGULATOR ADJUSTABLE TANK OF SECTIONS FROM THE FRONT AND FROM THE REAR SUPPLIABLE HEIGHT-ADJUSTABLE, ERGONOMIC SAFETY FOOT SWITCH BAR 15 MM THICK NOCK POWER PLATES® IN THE HOUSING FOR LONG-LASTING PRECISION AND GREAT SERVICE TABLE-SAFETY SWITCH LOCKABLE SWIVEL WHEELS STAINLESS STEEL
Vendedor: MVRG UG (haftungsbeschränkt) & Co. KG
Año de construcción: usado
Ubicación: Land-manufacturer: homag, type: fl 20/07/15/s, year: 2003, control: bc 21, software: woodline, modem: yes, work piece width min-max mm: 220 - 1500, min.-max. workpiece length in mm: 220, min.-max. workpiece height in mm: 8 - 90, machine with controlled dogs: yes, cam distance mm: 500, feeding speed min-max m/min: 10- 40, feed stepless: yes, min-max protrusion of workpiece mm: max 110, nockenaushebung: 25 mm, 1st milling unit kw / rpm: 11, 1. swivelling controllable: yes, 2nd milling unit kw / rpm: 6,6, 2. swivelling controllable: yes, 3rd milling unit kw / rpm: 6,6, 3. swivelling controllable: yes, 4th milling unit kw / rpm: 11, 4. swivelling controllable: yes, free text: mittelschnitflasch arbeitsbreite 300 - 500 mm, year :2003 MANUFACTURER: HOMAG, TYPE: FL 20/07/15/S, YEAR: 2003, CONTROL: BC 21, SOFTWARE: WOODLINE, MODEM: YES, WORK PIECE WIDTH MIN-MAX MM: 220 - 1500, MIN.-MAX. WORKPIECE LENGTH IN MM: 220, MIN.-MAX. WORKPIECE HEIGHT IN MM: 8 - 90, MACHINE WITH CONTROLLED DOGS: YES, CAM DISTANCE MM: 500, FEEDING SPEED MIN-MAX M/MIN: 10- 40, FEED STEPLESS: YES, MIN-MAX PROTRUSION OF WORKPIECE MM: MAX 110, NOCKENAUSHEBUNG: 25 MM, 1ST MILLING UNIT KW / RPM: 11, 1. SWIVELLING CONTROLLABLE: YES, 2ND MILLING UNIT KW / RPM: 6,6, 2. SWIVELLING CONTROLLABLE: YES, 3RD MILLING UNIT KW / RPM: 6,6, 3. SWIVELLING CONTROLLABLE: YES, 4TH MILLING UNIT KW / RPM: 11, 4. SWIVELLING CONTROLLABLE: YES, FREE TEXT: MITTELSCHNITFLASCH ARBEITSBREITE 300 - 500 MM, YEAR :2003
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-nominal capacity, ton:             400
ram stroke, mm                     240
ram stroks per minute              25
shut height, mm:                   750
adjustment of distance
between ram and bed, mm:           20
bed dimensions, mm                 1250 x 1000
lower knockout:
          stroke, mm                240
          force, kn                 500
upper knockout:
          stroke, mm                15-20
          force, kn                 160
main drive motor power, kw 40
overall dimensions of press, mm:
floor space                         2500 x 2260
height above floor level            4515
mass, t, approx.                    36,7  NOMINAL CAPACITY, TON: 400 RAM STROKE, MM 240 RAM STROKS PER MINUTE 25 SHUT HEIGHT, MM: 750 ADJUSTMENT OF DISTANCE BETWEEN RAM AND BED, MM: 20 BED DIMENSIONS, MM 1250 X 1000 LOWER KNOCKOUT: STROKE, MM 240 FORCE, KN 500 UPPER KNOCKOUT: STROKE, MM 15-20 FORCE, KN 160 MAIN DRIVE MOTOR POWER, KW 40 OVERALL DIMENSIONS OF PRESS, MM: FLOOR SPACE 2500 X 2260 HEIGHT ABOVE FLOOR LEVEL 4515 MASS, T, APPROX. 36,7
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-manufacturer: ima, type: maschinenstrasse combima, control: ima, work piece width min-max mm: 1 maschine 250-1500, min.-max. workpiece length in mm: 2 maschine 250-2600, min.-max. workpiece height in mm: 10-50, feeding: ja, machine no 1: yes, angular transfer: yes, machine 2: yes, drilling machine no1: no, destacking unit: yes, edgeband thickness max mm: 3, edgeband height max mm: 50, nockenabstand mm: 850, coil magazine: 6-fach, feeding speed max m/min: 10-30, premilling: yes, strip magazin: no, kantenmagazin: yes, mitre stations: yes, trimming saw: yes, büdigfräsen: yes, radius milling: yes, fasefräsen: yes, contour milling type: mfa, radius scraper: yes, flat scraper: yes, spraying device: yes, maschine vorführbereit: yes, MANUFACTURER: IMA, TYPE: MASCHINENSTRASSE COMBIMA, CONTROL: IMA, WORK PIECE WIDTH MIN-MAX MM: 1 MASCHINE 250-1500, MIN.-MAX. WORKPIECE LENGTH IN MM: 2 MASCHINE 250-2600, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-50, FEEDING: JA, MACHINE NO 1: YES, ANGULAR TRANSFER: YES, MACHINE 2: YES, DRILLING MACHINE NO1: NO, DESTACKING UNIT: YES, EDGEBAND THICKNESS MAX MM: 3, EDGEBAND HEIGHT MAX MM: 50, NOCKENABSTAND MM: 850, COIL MAGAZINE: 6-FACH, FEEDING SPEED MAX M/MIN: 10-30, PREMILLING: YES, STRIP MAGAZIN: NO, KANTENMAGAZIN: YES, MITRE STATIONS: YES, TRIMMING SAW: YES, B&UUML;DIGFR&AUML;SEN: YES, RADIUS MILLING: YES, FASEFR&AUML;SEN: YES, CONTOUR MILLING TYPE: MFA, RADIUS SCRAPER: YES, FLAT SCRAPER: YES, SPRAYING DEVICE: YES, MASCHINE VORF&UUML;HRBEREIT: YES,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-it is a used reconditioned rego stirring and beating machine sm 2 (20 litres) for sale. the speed of the machine is adjustable. with automatic discharge of the clock, boiler height adjustment crank revolution. electrical conversion of striking on stirring, genuine knocking out stationary shaft. 
the machine has a new agitator, was completely stored and painted. it is in very good condition and runs very quietly. including boiler, stirring, whisk. 
videos from the trial run can be sent on request.

price on request.
  IT IS A USED RECONDITIONED REGO STIRRING AND BEATING MACHINE SM 2 (20 LITRES) FOR SALE. THE SPEED OF THE MACHINE IS ADJUSTABLE. WITH AUTOMATIC DISCHARGE OF THE CLOCK, BOILER HEIGHT ADJUSTMENT CRANK REVOLUTION. ELECTRICAL CONVERSION OF STRIKING ON STIRRING, GENUINE KNOCKING OUT STATIONARY SHAFT. THE MACHINE HAS A NEW AGITATOR, WAS COMPLETELY STORED AND PAINTED. IT IS IN VERY GOOD CONDITION AND RUNS VERY QUIETLY. INCLUDING BOILER, STIRRING, WHISK. VIDEOS FROM THE TRIAL RUN CAN BE SENT ON REQUEST. PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-workpiece length:passenger car  mm<br/>workpiece height max.:pkw mm<br/>workpiece width - max.:nockenwelle camshaft mm<br/>total power requirement:155 kva<br/>weight of the machine ca.:xxx t<br/>dimensions of the machine ca.:19 m²<br/><br/>high pressure deburring, aqueous cleaning and blow off with compressed air in one system at the same time.   cleaning of car camshafts in a mtm waterjet highpressure deburring machine type kht 4.   WORKPIECE LENGTH:PASSENGER CAR MM
WORKPIECE HEIGHT MAX.:PKW MM
WORKPIECE WIDTH - MAX.:NOCKENWELLE CAMSHAFT MM
TOTAL POWER REQUIREMENT:155 KVA
WEIGHT OF THE MACHINE CA.:XXX T
DIMENSIONS OF THE MACHINE CA.:19 M²

HIGH PRESSURE DEBURRING, AQUEOUS CLEANING AND BLOW OFF WITH COMPRESSED AIR IN ONE SYSTEM AT THE SAME TIME. CLEANING OF CAR CAMSHAFTS IN A MTM WATERJET HIGHPRESSURE DEBURRING MACHINE TYPE KHT 4.
Vendedor: HD Werkzeugmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-material: stainless steel 1.4301
drive: 4 kw
weight: 1550 kg
area per deck: 2,6 mâ²
incl. 2 x ball knocking cleaning / 2 x sieve with mesh size choice: 0.1 5 mm. MATERIAL: STAINLESS STEEL 1.4301 DRIVE: 4 KW WEIGHT: 1550 KG AREA PER DECK: 2,6 M&ACIRC;&SUP2; INCL. 2 X BALL KNOCKING CLEANING / 2 X SIEVE WITH MESH SIZE CHOICE: 0.1 5 MM.
Vendedor: Minox Maschinenhandels GmbH
Año de construcción: usado
Ubicación: Land-total length of the press: 2700 mm
press width: 2200 mm
press height: 4100 mm
floor press height above the floor: 3800 mm
total weight: 35,500 kg
metal force: 10,000 kn
bar rake: 140 mm
ram adjustment: 15 mm
passage: 900 mm
number of strokes: 36 min. -1
surface barana width: 710 mm
length: 630 mm
table area width: 900 mm
length: 950 mm
tabletop thickness: 150 mm
upper ejector stroke: 30 mm   TOTAL LENGTH OF THE PRESS: 2700 MM PRESS WIDTH: 2200 MM PRESS HEIGHT: 4100 MM FLOOR PRESS HEIGHT ABOVE THE FLOOR: 3800 MM TOTAL WEIGHT: 35,500 KG METAL FORCE: 10,000 KN BAR RAKE: 140 MM RAM ADJUSTMENT: 15 MM PASSAGE: 900 MM NUMBER OF STROKES: 36 MIN. -1 SURFACE BARANA WIDTH: 710 MM LENGTH: 630 MM TABLE AREA WIDTH: 900 MM LENGTH: 950 MM TABLETOP THICKNESS: 150 MM UPPER EJECTOR STROKE: 30 MM
Vendedor: BASTA
Año de construcción: usado
Ubicación:
it makes no difference whether it is dealing with a very small edition or mass circulation. barcodes or registration marks are read and evaluated with the aid of a camera. these codes contain all important information such as: the book title, the number of signatures and which signature is currently being processed. once the book block is recognised as complete, it is transferred for further processing. if the book block is incomplete, then it is redirected, transferred separately and ejected. using this top-quality inspection and monitoring technology guarantees that only absolutely perfect book blocks are automatically transferred for further processing..gif" alt="Land-the palamides alpha 500 was designed as a universal delivery for processing folded brochures, especially signatures.

the products are collected by the machine, stacked and the neatly jogged stacks are delivered to a buffer table. the operator removes the ergonomically convenient jogged stack from the delivery table and no longer has to knock-up the products. this means that, even after several hours of production, the folding machine can still run at full production without tiring the operator.

the alpha delivers free of markings, i.e. no smearing of freshly printed products. in order to reduce set-up times the machine sets itself up pretty much automatically. the pressing unit can be opened at the press of a button, which greatly simplifies press roller cleaning and removal of double sheets.

as the alpha was mainly designed for signatures, the pressing unit is equipped with 3.5 t of pressing force. as with all palamides\' deliveries, the alpha identifies waste and automatically ejects it. alongside this delivery technology, which has been established for years, palamides have designed a further essential component, \"the intelligent output module\", which only forwards book blocks that have been checked for completeness to the subsequent finishing unit (e.g. adhesive binder etc.).

it makes no difference whether it is dealing with a very small edition or mass circulation. barcodes or registration marks are read and evaluated with the aid of a camera. these codes contain all important information such as: the book title, the number of signatures and which signature is currently being processed. once the book block is recognised as complete, it is transferred for further processing. if the book block is incomplete, then it is redirected, transferred separately and ejected. using this top-quality inspection and monitoring technology guarantees that only absolutely perfect book blocks are automatically transferred for further processing." style="height: 18px;"> THE PALAMIDES ALPHA 500 WAS DESIGNED AS A UNIVERSAL DELIVERY FOR PROCESSING FOLDED BROCHURES, ESPECIALLY SIGNATURES.

THE PRODUCTS ARE COLLECTED BY THE MACHINE, STACKED AND THE NEATLY JOGGED STACKS ARE DELIVERED TO A BUFFER TABLE. THE OPERATOR REMOVES THE ERGONOMICALLY CONVENIENT JOGGED STACK FROM THE DELIVERY TABLE AND NO LONGER HAS TO KNOCK-UP THE PRODUCTS. THIS MEANS THAT, EVEN AFTER SEVERAL HOURS OF PRODUCTION, THE FOLDING MACHINE CAN STILL RUN AT FULL PRODUCTION WITHOUT TIRING THE OPERATOR.

THE ALPHA DELIVERS FREE OF MARKINGS, I.E. NO SMEARING OF FRESHLY PRINTED PRODUCTS. IN ORDER TO REDUCE SET-UP TIMES THE MACHINE SETS ITSELF UP PRETTY MUCH AUTOMATICALLY. THE PRESSING UNIT CAN BE OPENED AT THE PRESS OF A BUTTON, WHICH GREATLY SIMPLIFIES PRESS ROLLER CLEANING AND REMOVAL OF DOUBLE SHEETS.

AS THE ALPHA WAS MAINLY DESIGNED FOR SIGNATURES, THE PRESSING UNIT IS EQUIPPED WITH 3.5 T OF PRESSING FORCE. AS WITH ALL PALAMIDES\' DELIVERIES, THE ALPHA IDENTIFIES WASTE AND AUTOMATICALLY EJECTS IT. ALONGSIDE THIS DELIVERY TECHNOLOGY, WHICH HAS BEEN ESTABLISHED FOR YEARS, PALAMIDES HAVE DESIGNED A FURTHER ESSENTIAL COMPONENT, \"THE INTELLIGENT OUTPUT MODULE\", WHICH ONLY FORWARDS BOOK BLOCKS THAT HAVE BEEN CHECKED FOR COMPLETENESS TO THE SUBSEQUENT FINISHING UNIT (E.G. ADHESIVE BINDER ETC.).

IT MAKES NO DIFFERENCE WHETHER IT IS DEALING WITH A VERY SMALL EDITION OR MASS CIRCULATION. BARCODES OR REGISTRATION MARKS ARE READ AND EVALUATED WITH THE AID OF A CAMERA. THESE CODES CONTAIN ALL IMPORTANT INFORMATION SUCH AS: THE BOOK TITLE, THE NUMBER OF SIGNATURES AND WHICH SIGNATURE IS CURRENTLY BEING PROCESSED. ONCE THE BOOK BLOCK IS RECOGNISED AS COMPLETE, IT IS TRANSFERRED FOR FURTHER PROCESSING. IF THE BOOK BLOCK IS INCOMPLETE, THEN IT IS REDIRECTED, TRANSFERRED SEPARATELY AND EJECTED. USING THIS TOP-QUALITY INSPECTION AND MONITORING TECHNOLOGY GUARANTEES THAT ONLY ABSOLUTELY PERFECT BOOK BLOCKS ARE AUTOMATICALLY TRANSFERRED FOR FURTHER PROCESSING.
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-this printing machine is for pure control and protection screenings with high
suitable performance for dry and wet screenings of all kinds.
the machine is on a mobile frame and can be used flexibly.
the used doppelklemmsiebrahmen can simply and self covered are.
optional can be used with ball knocking cleaning. 

screen area (m â²) 0.11 width (mm) b ã? 803 diameter (mm) ã? 465 drive power (kw) 0.38
weight (kg) 40 THIS PRINTING MACHINE IS FOR PURE CONTROL AND PROTECTION SCREENINGS WITH HIGH SUITABLE PERFORMANCE FOR DRY AND WET SCREENINGS OF ALL KINDS. THE MACHINE IS ON A MOBILE FRAME AND CAN BE USED FLEXIBLY. THE USED DOPPELKLEMMSIEBRAHMEN CAN SIMPLY AND SELF COVERED ARE. OPTIONAL CAN BE USED WITH BALL KNOCKING CLEANING. SCREEN AREA (M &ACIRC;&SUP2;) 0.11 WIDTH (MM) B &ATILDE;? 803 DIAMETER (MM) &ATILDE;? 465 DRIVE POWER (KW) 0.38 WEIGHT (KG) 40
Vendedor: GKM Siebtechnik GmbH
Año de construcción: usado
Ubicación: Land-this printing machine is the perfect solution for dry and wet screenings
of all kinds. it is height adjustable and has a mobile base.
the built-in doppelklemmsiebrahmen can be simply covered themselves and changed quickly. optionally, the machine can be equipped with a ball knocking cleaning and up to 3 sieve decks are possible.

screen area (m â²) 0.11 diameter (mm) ã? 455
drive power (kw) 0.19 weight (kg) 35

contact us for more information and also to other screening machines at info@gkm-net.de.

THIS PRINTING MACHINE IS THE PERFECT SOLUTION FOR DRY AND WET SCREENINGS OF ALL KINDS. IT IS HEIGHT ADJUSTABLE AND HAS A MOBILE BASE. THE BUILT-IN DOPPELKLEMMSIEBRAHMEN CAN BE SIMPLY COVERED THEMSELVES AND CHANGED QUICKLY. OPTIONALLY, THE MACHINE CAN BE EQUIPPED WITH A BALL KNOCKING CLEANING AND UP TO 3 SIEVE DECKS ARE POSSIBLE. SCREEN AREA (M &ACIRC;&SUP2;) 0.11 DIAMETER (MM) &ATILDE;? 455 DRIVE POWER (KW) 0.19 WEIGHT (KG) 35 CONTACT US FOR MORE INFORMATION AND ALSO TO OTHER SCREENING MACHINES AT INFO@GKM-NET.DE.
Vendedor: GKM Siebtechnik GmbH
Año de construcción: usado
Ubicación: Land-wire stitching machine (tenderizer) for saddle stapling / block stitch,.<br/>  max block thickness 22 mm (one-sided razor)<br/>  max block thickness 35 mm (double-sided razor)<br/>  380 volt work light.; verry good WIRE STITCHING MACHINE (TENDERIZER) FOR SADDLE STAPLING / BLOCK STITCH,.
MAX BLOCK THICKNESS 22 MM (ONE-SIDED RAZOR)
MAX BLOCK THICKNESS 35 MM (DOUBLE-SIDED RAZOR)
380 VOLT WORK LIGHT.; VERRY GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Precio: 34 €
Ubicación: -switch siemens 3sb18 aluminium cast with 3sb1420-0b 230v 10/6a & 2m...
-driving motor sew k46 dt71d 4bmg 3 ~ 380v 0.37 kw 117 u/min
-electric motor fdr 160 dietz 22 kw 380/430v wave 40 mm lk 300 mm
-electric motor eex thurm kmrb 90 l2 220/380v 2, 1kw 2855u/min w. 26 mm
-electric motor evic msz 152 220/380 v 4.0 kw 14401 rpm shaft 24 mm
-centrifuge szb0 1000c 960 1 / min 6 loadings/h
-kod425 flange motor with brake gear motor 0,25 kw 2800 u i 66 =
-geared motor flange motor dc motor 75 w 2000/48,5u 10nm
-transformer fig. 3 ~ 20(15) kv / 400 v 630 kva year 2014
-control transformer transformer est 1,6 1600/3200 va 380/220v 7,27a
-eccentric press ambold to edsp 55, pressing force 55 mp thickness up to 4, 5 mm
-record holder schnellw. quick-change mk3 & cutter 18 mm
-150 x u profile (3 packages a 50 piece steel 15 x 30 x 15 x 2.5 x ca. 3000 mm...)
-drip range sump with grating 200 l for 2 x 200.
-horizontal grinder band cs411 2.gif" alt="Land-we offer:

from the inventory of a geschalts - / bearing resolution

switch 2 switch 2 changer with zero 380v 6a

manufacturer: robotron
pvc case with nockenschltern control switch
2 switch b31 ddr 6a 380v
2 changer with zero position a21 380v 6a
tgl 33573
transport weight: approx. 1kg

condition: from camp, used see photo, ready for action,

further technical vermögeswerte in the offer:

-emd ee620702 pneumatic actuator federrücks.mit ball valve valpres dn40 pn 25 aisi 316 stainless steel 1 1/2 "
-switch siemens 3sb18 aluminium cast with 3sb1420-0b 230v 10/6a & 2m...
-driving motor sew k46 dt71d 4bmg 3 ~ 380v 0.37 kw 117 u/min
-electric motor fdr 160 dietz 22 kw 380/430v wave 40 mm lk 300 mm
-electric motor eex thurm kmrb 90 l2 220/380v 2, 1kw 2855u/min w. 26 mm
-electric motor evic msz 152 220/380 v 4.0 kw 14401 rpm shaft 24 mm
-centrifuge szb0 1000c 960 1 / min 6 loadings/h
-kod425 flange motor with brake gear motor 0,25 kw 2800 u i 66 =
-geared motor flange motor dc motor 75 w 2000/48,5u 10nm
-transformer fig. 3 ~ 20(15) kv / 400 v 630 kva year 2014
-control transformer transformer est 1,6 1600/3200 va 380/220v 7,27a
-eccentric press ambold to edsp 55, pressing force 55 mp thickness up to 4, 5 mm
-record holder schnellw. quick-change mk3 & cutter 18 mm
-150 x u profile (3 packages a 50 piece steel 15 x 30 x 15 x 2.5 x ca. 3000 mm...)
-drip range sump with grating 200 l for 2 x 200.
-horizontal grinder band cs411 2" style="height: 18px;"> WE OFFER:

FROM THE INVENTORY OF A GESCHALTS - / BEARING RESOLUTION

SWITCH 2 SWITCH 2 CHANGER WITH ZERO 380V 6A

MANUFACTURER: ROBOTRON
PVC CASE WITH NOCKENSCHLTERN CONTROL SWITCH
2 SWITCH B31 DDR 6A 380V
2 CHANGER WITH ZERO POSITION A21 380V 6A
TGL 33573
TRANSPORT WEIGHT: APPROX. 1KG

CONDITION: FROM CAMP, USED SEE PHOTO, READY FOR ACTION,

FURTHER TECHNICAL VERMöGESWERTE IN THE OFFER:

-EMD EE620702 PNEUMATIC ACTUATOR FEDERRüCKS.MIT BALL VALVE VALPRES DN40 PN 25 AISI 316 STAINLESS STEEL 1 1/2 "
-SWITCH SIEMENS 3SB18 ALUMINIUM CAST WITH 3SB1420-0B 230V 10/6A & 2M...
-DRIVING MOTOR SEW K46 DT71D 4BMG 3 ~ 380V 0.37 KW 117 U/MIN
-ELECTRIC MOTOR FDR 160 DIETZ 22 KW 380/430V WAVE 40 MM LK 300 MM
-ELECTRIC MOTOR EEX THURM KMRB 90 L2 220/380V 2, 1KW 2855U/MIN W. 26 MM
-ELECTRIC MOTOR EVIC MSZ 152 220/380 V 4.0 KW 14401 RPM SHAFT 24 MM
-CENTRIFUGE SZB0 1000C 960 1 / MIN 6 LOADINGS/H
-KOD425 FLANGE MOTOR WITH BRAKE GEAR MOTOR 0,25 KW 2800 U I 66 =
-GEARED MOTOR FLANGE MOTOR DC MOTOR 75 W 2000/48,5U 10NM
-TRANSFORMER FIG. 3 ~ 20(15) KV / 400 V 630 KVA YEAR 2014
-CONTROL TRANSFORMER TRANSFORMER EST 1,6 1600/3200 VA 380/220V 7,27A
-ECCENTRIC PRESS AMBOLD TO EDSP 55, PRESSING FORCE 55 MP THICKNESS UP TO 4, 5 MM
-RECORD HOLDER SCHNELLW. QUICK-CHANGE MK3 & CUTTER 18 MM
-150 X U PROFILE (3 PACKAGES A 50 PIECE STEEL 15 X 30 X 15 X 2.5 X CA. 3000 MM...)
-DRIP RANGE SUMP WITH GRATING 200 L FOR 2 X 200.
-HORIZONTAL GRINDER BAND CS411 2
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Ubicación: Land-1500ton cold forging press(aida:japan)

make:aida(japan)

manufacturing year:1982

model:pk-150

type:mechanical type

slidse stroke:220mm

spm:20

bolster area:780mm x 1000mm(lr xfb)

bolster thickness:200mm

slide area:700x1000mm((lr xfb)

dieheight: 750mm

main motor:100kw x4p

slide adjustment:15mm

(knock out equipment)

capacity:75ton(3units)

knock stroke:70mm

air pressure:5kg/cm2

 

main motor: 100kw

slide adjustment motor: 2.7 kw



(dimension)

approximately 4500mm x 5000mm x 6945mm(from floor)

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567









   1500TON COLD FORGING PRESS(AIDA:JAPAN) MAKE:AIDA(JAPAN) MANUFACTURING YEAR:1982 MODEL:PK-150 TYPE:MECHANICAL TYPE SLIDSE STROKE:220MM SPM:20 BOLSTER AREA:780MM X 1000MM(LR XFB) BOLSTER THICKNESS:200MM SLIDE AREA:700X1000MM((LR XFB) DIEHEIGHT: 750MM MAIN MOTOR:100KW X4P SLIDE ADJUSTMENT:15MM (KNOCK OUT EQUIPMENT) CAPACITY:75TON(3UNITS) KNOCK STROKE:70MM AIR PRESSURE:5KG/CM2 MAIN MOTOR: 100KW SLIDE ADJUSTMENT MOTOR: 2.7 KW (DIMENSION) APPROXIMATELY 4500MM X 5000MM X 6945MM(FROM FLOOR) BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-spindle taper:spannzange/collet <br/>spindle stroke:100 mm<br/>number of spindles:11 stück<br/>number of stations:9 stück<br/>cycle time:2 - 12  sec<br/>revolutions per minute:bohren/drill/taladrar 745...2180 u/min.<br/>revolutions per minute:gewinden/threading/roscar 185...350 u/min.<br/>feed:0-1 m/min<br/>total power requirement:ca. 15 kw<br/>weight of the machine ca.:4,5 t<br/>space requirement of the machine approx.:3,0 x 8,0 x 2,5 m<br/>dimensions of machine:2,5 x 2,5 x 2,5 m<br/><br/>the machine has been constructed for the metal cutting process of workpieces in one clamping session.  first step ist the cutting of the work piece from the bar which is coming from the iemca bar loader t 560/40p    technical description of a workpiece which is epuiped at the machine at the moment:  processing units:  station 1 bucking of the bar material coming from the bar loader  station 2 piecing of cone station 3 milling 1 various station 4 milling 2 various station 5 milling 3 various station 6 piecing of cone station 7 thread milling station 8 free / no working station 9 cross bore station 10 free / no working station 11 grinding station 12 knock out     machine is equipped with a feeding-and unloading unit for workpieces.   incl. chip conveyer with magnetic absorber  incl. filter mist system incl. full machine cover iemca loader t 560/ 40 p dia max 40 mm   SPINDLE TAPER:SPANNZANGE/COLLET
SPINDLE STROKE:100 MM
NUMBER OF SPINDLES:11 STüCK
NUMBER OF STATIONS:9 STüCK
CYCLE TIME:2 - 12 SEC
REVOLUTIONS PER MINUTE:BOHREN/DRILL/TALADRAR 745...2180 U/MIN.
REVOLUTIONS PER MINUTE:GEWINDEN/THREADING/ROSCAR 185...350 U/MIN.
FEED:0-1 M/MIN
TOTAL POWER REQUIREMENT:CA. 15 KW
WEIGHT OF THE MACHINE CA.:4,5 T
SPACE REQUIREMENT OF THE MACHINE APPROX.:3,0 X 8,0 X 2,5 M
DIMENSIONS OF MACHINE:2,5 X 2,5 X 2,5 M

THE MACHINE HAS BEEN CONSTRUCTED FOR THE METAL CUTTING PROCESS OF WORKPIECES IN ONE CLAMPING SESSION. FIRST STEP IST THE CUTTING OF THE WORK PIECE FROM THE BAR WHICH IS COMING FROM THE IEMCA BAR LOADER T 560/40P TECHNICAL DESCRIPTION OF A WORKPIECE WHICH IS EPUIPED AT THE MACHINE AT THE MOMENT: PROCESSING UNITS: STATION 1 BUCKING OF THE BAR MATERIAL COMING FROM THE BAR LOADER STATION 2 PIECING OF CONE STATION 3 MILLING 1 VARIOUS STATION 4 MILLING 2 VARIOUS STATION 5 MILLING 3 VARIOUS STATION 6 PIECING OF CONE STATION 7 THREAD MILLING STATION 8 FREE / NO WORKING STATION 9 CROSS BORE STATION 10 FREE / NO WORKING STATION 11 GRINDING STATION 12 KNOCK OUT MACHINE IS EQUIPPED WITH A FEEDING-AND UNLOADING UNIT FOR WORKPIECES. INCL. CHIP CONVEYER WITH MAGNETIC ABSORBER INCL. FILTER MIST SYSTEM INCL. FULL MACHINE COVER IEMCA LOADER T 560/ 40 P DIA MAX 40 MM
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 41.000 €
Ubicación: Land-technische daten:<br/> <br/>- 6 aggregate<br/>- arbeitsbreite min./max. 300 - 2500 mm<br/>- arbeitshöhe min./max. 10 - 120 mm<br/>- vorschub stufenlos regelbar 6 - 36 m/min<br/>- motor vorschub 4,0 kw<br/>- motor breitenverstellung 0,75 kw<br/>- gesamtanschluss 41,0 kw<br/>- spannung 400 v / 50 hz<br/>- absaugstutzen fi 6 x 120 mm<br/>- plc + touch screen steuerung<br/>- transportkette mit nocken, abstand 500 mm<br/>- einlauflänge 1500 mm für paneele / dielung / möbelplatten / türen<br/> <br/>vorritzsäge:<br/>- motor 3,0 kw<br/>- drehzahl 3000 upm.<br/>- sägeblattaufnahme fi 30 mm<br/>- sägeblatt fi min./max. 160 - 200 mm<br/> <br/>ablängsäge:(zerspaner)<br/>- motor 7,5 kw<br/>- drehzahl 3000 upm.<br/>- sägeblattaufnahme fi 30 mm<br/>- sägeblatt fi min./max. 200 - 300 mm<br/> <br/>frässpindel:<br/>- motor 7,5 kw<br/>- drehzahl 7500 upm.<br/>- frässpindelaufnahme fi 40 mm<br/>- werkzeug fi min./max. 108 - 180 mm<br/>- schwenkbar +60c bis -30c<br/> <br/>- abmessungen l=4850, b=4380, h=1820 mm<br/>- gewicht 5800 kg TECHNISCHE DATEN:

- 6 AGGREGATE
- ARBEITSBREITE MIN./MAX. 300 - 2500 MM
- ARBEITSHöHE MIN./MAX. 10 - 120 MM
- VORSCHUB STUFENLOS REGELBAR 6 - 36 M/MIN
- MOTOR VORSCHUB 4,0 KW
- MOTOR BREITENVERSTELLUNG 0,75 KW
- GESAMTANSCHLUSS 41,0 KW
- SPANNUNG 400 V / 50 HZ
- ABSAUGSTUTZEN FI 6 X 120 MM
- PLC + TOUCH SCREEN STEUERUNG
- TRANSPORTKETTE MIT NOCKEN, ABSTAND 500 MM
- EINLAUFLäNGE 1500 MM FüR PANEELE / DIELUNG / MöBELPLATTEN / TüREN

VORRITZSäGE:
- MOTOR 3,0 KW
- DREHZAHL 3000 UPM.
- SäGEBLATTAUFNAHME FI 30 MM
- SäGEBLATT FI MIN./MAX. 160 - 200 MM

ABLäNGSäGE:(ZERSPANER)
- MOTOR 7,5 KW
- DREHZAHL 3000 UPM.
- SäGEBLATTAUFNAHME FI 30 MM
- SäGEBLATT FI MIN./MAX. 200 - 300 MM

FRäSSPINDEL:
- MOTOR 7,5 KW
- DREHZAHL 7500 UPM.
- FRäSSPINDELAUFNAHME FI 40 MM
- WERKZEUG FI MIN./MAX. 108 - 180 MM
- SCHWENKBAR +60C BIS -30C

- ABMESSUNGEN L=4850, B=4380, H=1820 MM
- GEWICHT 5800 KG
Vendedor: Winter Holztechnik GmbH
Año de construcción: usado
Precio: 48.500 €
Ubicación: Land-technische daten:<br/> <br/>- 8 aggregate<br/>- arbeitsbreite min./max. 300 - 2500 mm<br/>- arbeitshöhe min./max. 10 - 120 mm<br/>- vorschub stufenlos regelbar 6 - 36 m/min<br/>- motor vorschub 4,0 kw<br/>- motor breitenverstellung 0,75 kw<br/>- gesamtanschluss 47,0 kw<br/>- spannung 400 v / 50 hz<br/>- absaugstutzen fi 8 x 120 mm<br/>- plc + touch screen steuerung<br/>- transportkette mit nocken, abstand 500 mm<br/>- einlauflänge 1500 mm für paneele / dielung / möbelplatten / türen<br/> <br/>vorritzsäge:<br/>- motor 2,2 kw<br/>- drehzahl 3000 upm.<br/>- sägeblattaufnahme fi 30 mm<br/>- sägeblatt fi min./max. 160 - 200 mm<br/> <br/>ablängsäge:(zerspaner)<br/>- motor 5,5 kw<br/>- drehzahl 3000 upm.<br/>- sägeblattaufnahme fi 30 mm<br/>- sägeblatt fi min./max. 200 - 300 mm<br/> <br/>1. frässpindel:<br/>- motor 5,5 kw<br/>- drehzahl 7500 upm.<br/>- frässpindelaufnahme fi 40 mm<br/>- werkzeug fi min./max. 108 - 180 mm<br/>- jumping (pneumatisch gesteuertes ein- und austauchen)<br/> <br/>2. frässpindel:<br/>- motor 7,5 kw<br/>- drehzahl 7500 upm.<br/>- frässpindelaufnahme fi 40 mm<br/>- werkzeug fi min./max. 108 - 180 mm<br/>- schwenkbar +60c bis -30c<br/> <br/>- abmessungen l=4850, b=4650, h=1820 mm<br/>- gewicht 6500 kg TECHNISCHE DATEN:

- 8 AGGREGATE
- ARBEITSBREITE MIN./MAX. 300 - 2500 MM
- ARBEITSHöHE MIN./MAX. 10 - 120 MM
- VORSCHUB STUFENLOS REGELBAR 6 - 36 M/MIN
- MOTOR VORSCHUB 4,0 KW
- MOTOR BREITENVERSTELLUNG 0,75 KW
- GESAMTANSCHLUSS 47,0 KW
- SPANNUNG 400 V / 50 HZ
- ABSAUGSTUTZEN FI 8 X 120 MM
- PLC + TOUCH SCREEN STEUERUNG
- TRANSPORTKETTE MIT NOCKEN, ABSTAND 500 MM
- EINLAUFLäNGE 1500 MM FüR PANEELE / DIELUNG / MöBELPLATTEN / TüREN

VORRITZSäGE:
- MOTOR 2,2 KW
- DREHZAHL 3000 UPM.
- SäGEBLATTAUFNAHME FI 30 MM
- SäGEBLATT FI MIN./MAX. 160 - 200 MM

ABLäNGSäGE:(ZERSPANER)
- MOTOR 5,5 KW
- DREHZAHL 3000 UPM.
- SäGEBLATTAUFNAHME FI 30 MM
- SäGEBLATT FI MIN./MAX. 200 - 300 MM

1. FRäSSPINDEL:
- MOTOR 5,5 KW
- DREHZAHL 7500 UPM.
- FRäSSPINDELAUFNAHME FI 40 MM
- WERKZEUG FI MIN./MAX. 108 - 180 MM
- JUMPING (PNEUMATISCH GESTEUERTES EIN- UND AUSTAUCHEN)

2. FRäSSPINDEL:
- MOTOR 7,5 KW
- DREHZAHL 7500 UPM.
- FRäSSPINDELAUFNAHME FI 40 MM
- WERKZEUG FI MIN./MAX. 108 - 180 MM
- SCHWENKBAR +60C BIS -30C

- ABMESSUNGEN L=4850, B=4650, H=1820 MM
- GEWICHT 6500 KG
Vendedor: Winter Holztechnik GmbH
Año de construcción: usado
Ubicación: Land-technical specification: 
capacity, ton 1000 
ram stroke, mm 250 
shut height, mm 560 
number of strokes per minute 90 
table dimensions, mm 990 x 770 
ram dimensions, mm 720 x 720 
opening in the column, mm 1250 x 560 
table-to-ram adjustment, mm 20 
upper knockout stroke, mm 40 
lower knockout stroke, mm 40 
lower knockout capacity, ton 5 
main motor power, kw 55 
voltage, v 380 
machine dimensions, mm 4350 x 3500 x 5145 
press weight, kg 65100    TECHNICAL SPECIFICATION: CAPACITY, TON 1000 RAM STROKE, MM 250 SHUT HEIGHT, MM 560 NUMBER OF STROKES PER MINUTE 90 TABLE DIMENSIONS, MM 990 X 770 RAM DIMENSIONS, MM 720 X 720 OPENING IN THE COLUMN, MM 1250 X 560 TABLE-TO-RAM ADJUSTMENT, MM 20 UPPER KNOCKOUT STROKE, MM 40 LOWER KNOCKOUT STROKE, MM 40 LOWER KNOCKOUT CAPACITY, TON 5 MAIN MOTOR POWER, KW 55 VOLTAGE, V 380 MACHINE DIMENSIONS, MM 4350 X 3500 X 5145 PRESS WEIGHT, KG 65100
Vendedor: Kipling Holding
Año de construcción: usado
Ubicación: Land-radilbohrmaschine kolb germany cologne hermann kolb works
 type: hkh 83-1600 built around 1961 no. 11267/1961
 throat depth: 1600 mm
 drilling capacity: 83 mm
 boring quill spindle diameter: 115 mm
 taper mount: mk 6
 quill stroke: 625 mm-hand and auto.
 speed range: 14-1340 rpm gearbox with manual override control
 drill drive motor: 7.5 kw 380 volt 50 hz
 feed drilling tailstock: 0.07-2.9 mm / u - prechoiceed
 dnxqscvuw
 + nockenabschalttielfeneinstellung choiceable

mass approx. length 3.15 m width; 1.35 m height with pillar motor: 3.35 m without motro

cutter head equipped with rapid traverse for lateral movement

stand column diameter: 500 mm
 columns boom drilling head clamp electro-mechanical hydraulic
 boom height adjustable by electric motor
 distance v. spindle nose base foot mounting plate:
 minimum approximately 0.70 m approximately: 1.55 mm spindle-driven
 foot base clamping plate approx. 1.12 m x 2, 0 m with 3 flutes

facilities: coolant pump + drilling table (customer own construction) mass approx.: length; 3.15 m width; 1.35 m height with pillar motor: 3.35 m - without motor: 3.1 m weight approx. 6.5 to    RADILBOHRMASCHINE KOLB GERMANY COLOGNE HERMANN KOLB WORKS TYPE: HKH 83-1600 BUILT AROUND 1961 NO. 11267/1961 THROAT DEPTH: 1600 MM DRILLING CAPACITY: 83 MM BORING QUILL SPINDLE DIAMETER: 115 MM TAPER MOUNT: MK 6 QUILL STROKE: 625 MM-HAND AND AUTO. SPEED RANGE: 14-1340 RPM GEARBOX WITH MANUAL OVERRIDE CONTROL DRILL DRIVE MOTOR: 7.5 KW 380 VOLT 50 HZ FEED DRILLING TAILSTOCK: 0.07-2.9 MM / U - PRECHOICEED DNXQSCVUW + NOCKENABSCHALTTIELFENEINSTELLUNG CHOICEABLE MASS APPROX. LENGTH 3.15 M WIDTH; 1.35 M HEIGHT WITH PILLAR MOTOR: 3.35 M WITHOUT MOTRO CUTTER HEAD EQUIPPED WITH RAPID TRAVERSE FOR LATERAL MOVEMENT STAND COLUMN DIAMETER: 500 MM COLUMNS BOOM DRILLING HEAD CLAMP ELECTRO-MECHANICAL HYDRAULIC BOOM HEIGHT ADJUSTABLE BY ELECTRIC MOTOR DISTANCE V. SPINDLE NOSE BASE FOOT MOUNTING PLATE: MINIMUM APPROXIMATELY 0.70 M APPROXIMATELY: 1.55 MM SPINDLE-DRIVEN FOOT BASE CLAMPING PLATE APPROX. 1.12 M X 2, 0 M WITH 3 FLUTES FACILITIES: COOLANT PUMP + DRILLING TABLE (CUSTOMER OWN CONSTRUCTION) MASS APPROX.: LENGTH; 3.15 M WIDTH; 1.35 M HEIGHT WITH PILLAR MOTOR: 3.35 M - WITHOUT MOTOR: 3.1 M WEIGHT APPROX. 6.5 TO
Vendedor: Maschinen Stumpf GmbH
Año de construcción: usado
Ubicación: Land-version: mk3, centre height: 185mm, turning length: 750mm, voltage: 400v, power: 5.5kw, machine length: 2055mm, net weight: 1200kg, speed range: 40-1800rpm. upper spindle knocked out. feed does not work. slight leaks. linear guide no longer 100 percent. no jaw chucks.  VERSION: MK3, CENTRE HEIGHT: 185MM, TURNING LENGTH: 750MM, VOLTAGE: 400V, POWER: 5.5KW, MACHINE LENGTH: 2055MM, NET WEIGHT: 1200KG, SPEED RANGE: 40-1800RPM. UPPER SPINDLE KNOCKED OUT. FEED DOES NOT WORK. SLIGHT LEAKS. LINEAR GUIDE NO LONGER 100 PERCENT. NO JAW CHUCKS.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-automatic transfer press aida ft2-25 
country of origin: japan
manufacturer: aida engineering

specification:

capacity: 250 ton
each stage capacity: 50 ton
capacity of blanking stages: 50 ton
number of stages (incl. blanking stage): 13
distance between stages: 250 mm
stroke length: 250 mm
blanking slide stroke: 60 mm
max drawing depth: 85 mm
max blank dia: 200 mm

adjustment of tool holder: 50 mm
number of strokes: 20-40 spm
die height (stroke down adjust up 
between carrier plate and tool holder): 650 mm
thickness of carrier plate: 230 mm
carrier plate hole dia: 200 mm
main electric motor: 55 kw
knockout capacity: 1 ton (mechanical)

feed stroke length: 250 mm
feed direction: left to right
lower die height: 400 mm (over carriage plate)
clamp stroke length: 120 mm (one side)
inside width of feed bars: 300 mm (at clamp)
die cushion capacity: 4.2 ton (2nd stage - 3th stage)
die cushion capacity: 2.8 ton (4th stage - 13th stage)
stroke length (die cushion): 85 mm
power source: 380 v/ 50hz

dimension: 7500x3270x6350 mm
weight: 85000 kg AUTOMATIC TRANSFER PRESS AIDA FT2-25 COUNTRY OF ORIGIN: JAPAN MANUFACTURER: AIDA ENGINEERING SPECIFICATION: CAPACITY: 250 TON EACH STAGE CAPACITY: 50 TON CAPACITY OF BLANKING STAGES: 50 TON NUMBER OF STAGES (INCL. BLANKING STAGE): 13 DISTANCE BETWEEN STAGES: 250 MM STROKE LENGTH: 250 MM BLANKING SLIDE STROKE: 60 MM MAX DRAWING DEPTH: 85 MM MAX BLANK DIA: 200 MM ADJUSTMENT OF TOOL HOLDER: 50 MM NUMBER OF STROKES: 20-40 SPM DIE HEIGHT (STROKE DOWN ADJUST UP BETWEEN CARRIER PLATE AND TOOL HOLDER): 650 MM THICKNESS OF CARRIER PLATE: 230 MM CARRIER PLATE HOLE DIA: 200 MM MAIN ELECTRIC MOTOR: 55 KW KNOCKOUT CAPACITY: 1 TON (MECHANICAL) FEED STROKE LENGTH: 250 MM FEED DIRECTION: LEFT TO RIGHT LOWER DIE HEIGHT: 400 MM (OVER CARRIAGE PLATE) CLAMP STROKE LENGTH: 120 MM (ONE SIDE) INSIDE WIDTH OF FEED BARS: 300 MM (AT CLAMP) DIE CUSHION CAPACITY: 4.2 TON (2ND STAGE - 3TH STAGE) DIE CUSHION CAPACITY: 2.8 TON (4TH STAGE - 13TH STAGE) STROKE LENGTH (DIE CUSHION): 85 MM POWER SOURCE: 380 V/ 50HZ DIMENSION: 7500X3270X6350 MM WEIGHT: 85000 KG
Vendedor: Kipling Holding
Año de construcción: usado
Ubicación: Land-specification:
nominal force: 1000 tons
slide stroke: 400 mm
number of continuous slide strokes per 1 min: 20
number of single slide strokes per 1 min: 16
max. distance between table and slide in its lower position: 1060 mm
adjustment of distance between table and slide: 920 mm
max. distance between bolster plate and slide in its lower position at the upper position of adjustment: 810 mm
size of distance adjustment between bolster plate and slide: 320 mm
shut height: 810 mm
slide adjustment: 320 mm
table dimensions: 3150x1800 mm
slide dimensions, front-back: 1700 mm
bolster plate thickness: 250 mm
slide travel to its extreme position where press develops nominal force: 12 mm
total pneumatic cushion force: 200 tons
pneumatic cushion working stroke: 200 mm
number of table windows: 2
dimensions of a window in the table:
 -left-to-right: 1200 mm
 -front-to-back: 1130 mm
dimensions of a window in the column:
 -height: 1500 mm
 -width: at least 1900 mm
hard ejector in the slide:
 -force: 50 tons
 -stroke: 150 mm
max. weight of die: 9000 kg
upper knock-out force: 50 tons
main drive electric motor power: 132 kw
voltage: 380 v, 50 hz
overall press dimensions: 5150x4700x7830 mm
overall press height: 11400 mm
max. total weight of die: 20 tons
press weight: 193 tons SPECIFICATION: NOMINAL FORCE: 1000 TONS SLIDE STROKE: 400 MM NUMBER OF CONTINUOUS SLIDE STROKES PER 1 MIN: 20 NUMBER OF SINGLE SLIDE STROKES PER 1 MIN: 16 MAX. DISTANCE BETWEEN TABLE AND SLIDE IN ITS LOWER POSITION: 1060 MM ADJUSTMENT OF DISTANCE BETWEEN TABLE AND SLIDE: 920 MM MAX. DISTANCE BETWEEN BOLSTER PLATE AND SLIDE IN ITS LOWER POSITION AT THE UPPER POSITION OF ADJUSTMENT: 810 MM SIZE OF DISTANCE ADJUSTMENT BETWEEN BOLSTER PLATE AND SLIDE: 320 MM SHUT HEIGHT: 810 MM SLIDE ADJUSTMENT: 320 MM TABLE DIMENSIONS: 3150X1800 MM SLIDE DIMENSIONS, FRONT-BACK: 1700 MM BOLSTER PLATE THICKNESS: 250 MM SLIDE TRAVEL TO ITS EXTREME POSITION WHERE PRESS DEVELOPS NOMINAL FORCE: 12 MM TOTAL PNEUMATIC CUSHION FORCE: 200 TONS PNEUMATIC CUSHION WORKING STROKE: 200 MM NUMBER OF TABLE WINDOWS: 2 DIMENSIONS OF A WINDOW IN THE TABLE: -LEFT-TO-RIGHT: 1200 MM -FRONT-TO-BACK: 1130 MM DIMENSIONS OF A WINDOW IN THE COLUMN: -HEIGHT: 1500 MM -WIDTH: AT LEAST 1900 MM HARD EJECTOR IN THE SLIDE: -FORCE: 50 TONS -STROKE: 150 MM MAX. WEIGHT OF DIE: 9000 KG UPPER KNOCK-OUT FORCE: 50 TONS MAIN DRIVE ELECTRIC MOTOR POWER: 132 KW VOLTAGE: 380 V, 50 HZ OVERALL PRESS DIMENSIONS: 5150X4700X7830 MM OVERALL PRESS HEIGHT: 11400 MM MAX. TOTAL WEIGHT OF DIE: 20 TONS PRESS WEIGHT: 193 TONS
Vendedor: Kipling Holding
Año de construcción: usado
Ubicación: Land-1500ton transfer press

make: komatsu(japan)

year: 1985

3-dimensions

servo transfer  type 

stages: 5 stage transfer

the distance between the stages:900mm

depth of drawing: max.200mm

slide stroke: 700mm

slide size: 2300mm x4650mm

bolster size: 2300mm(f.b) x4800mm(r.l)

bolster thickness: 300mm

spm: 10-22

dieheight:1150mm(max.) 1050mm(min.)

slide adjustment: 100mm

(cushion)

1stage: 140ton

2stage: 100ton

3stage: 30ton

4stage: 30ton

5stage: 30ton

cushion stroke: 250mm

(knock out)

max.5ton per each stayion

stroke: 250mm

(blank size)

max. width 900mm x1800mm

min. width 150mm x700mm

coil thickness: max.3.2mm-min.0.5mm


  bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567


  



    1500TON TRANSFER PRESS MAKE: KOMATSU(JAPAN) YEAR: 1985 3-DIMENSIONS SERVO TRANSFER TYPE STAGES: 5 STAGE TRANSFER THE DISTANCE BETWEEN THE STAGES:900MM DEPTH OF DRAWING: MAX.200MM SLIDE STROKE: 700MM SLIDE SIZE: 2300MM X4650MM BOLSTER SIZE: 2300MM(F.B) X4800MM(R.L) BOLSTER THICKNESS: 300MM SPM: 10-22 DIEHEIGHT:1150MM(MAX.) 1050MM(MIN.) SLIDE ADJUSTMENT: 100MM (CUSHION) 1STAGE: 140TON 2STAGE: 100TON 3STAGE: 30TON 4STAGE: 30TON 5STAGE: 30TON CUSHION STROKE: 250MM (KNOCK OUT) MAX.5TON PER EACH STAYION STROKE: 250MM (BLANK SIZE) MAX. WIDTH 900MM X1800MM MIN. WIDTH 150MM X700MM COIL THICKNESS: MAX.3.2MM-MIN.0.5MM BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-1500ton transfer press

make: komatsu(japan)

year: 1985

3-dimensions

servo transfer  type 

stages: 5 stage transfer

the distance between the stages:900mm

depth of drawing: max.200mm

slide stroke: 700mm

slide size: 2300mm x4650mm

bolster size: 2300mm(f.b) x4800mm(r.l)

bolster thickness: 300mm

spm: 10-22

dieheight:1150mm(max.) 1050mm(min.)

slide adjustment: 100mm

(cushion)

1stage: 140ton

2stage: 100ton

3stage: 30ton

4stage: 30ton

5stage: 30ton

cushion stroke: 250mm

(knock out)

max.5ton per each stayion

stroke: 250mm

(blank size)

max. width 900mm x1800mm

min. width 150mm x700mm

coil thickness: max.3.2mm-min.0.5mm

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567


 





    1500TON TRANSFER PRESS MAKE: KOMATSU(JAPAN) YEAR: 1985 3-DIMENSIONS SERVO TRANSFER TYPE STAGES: 5 STAGE TRANSFER THE DISTANCE BETWEEN THE STAGES:900MM DEPTH OF DRAWING: MAX.200MM SLIDE STROKE: 700MM SLIDE SIZE: 2300MM X4650MM BOLSTER SIZE: 2300MM(F.B) X4800MM(R.L) BOLSTER THICKNESS: 300MM SPM: 10-22 DIEHEIGHT:1150MM(MAX.) 1050MM(MIN.) SLIDE ADJUSTMENT: 100MM (CUSHION) 1STAGE: 140TON 2STAGE: 100TON 3STAGE: 30TON 4STAGE: 30TON 5STAGE: 30TON CUSHION STROKE: 250MM (KNOCK OUT) MAX.5TON PER EACH STAYION STROKE: 250MM (BLANK SIZE) MAX. WIDTH 900MM X1800MM MIN. WIDTH 150MM X700MM COIL THICKNESS: MAX.3.2MM-MIN.0.5MM BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-execution: normal
belt width: 1000 mm
torsion: 19.5 â°
lines: horizontal - vertical - horizontal
length: l = 33741 mm (approx. 8018/ 12796 / 12927 mm)
conveyor belt: gb = flexowell f240s - 1000 mm, l = 70 m open
arrangements: sn-528 drive drum, whether. pulley, whether. deflection); sn-513 (knocking drum); sn-522 (unt. deflection, unt. pulley, spanntrtommel);    sn-511 (stub roles); ucp-208 (rollers)
belt guide: fgr-260 with bearings ucf-206
belt cleaning: 2 x plow scrapers, 2 x washers wipers
drive unit: bk70-54vl/d13la4-s/e075b9/sp
drive capacity: 9,5 kw
speed drive shaft: 31.5 rpm
capacity: 31 t / h
conveyor speed: 0.98 m/s
conveyed goods: wet wood chips
bulk weight: 0.31 t / m â³ (0.300 - 0.350 t / m â³)
humidity: 35% (20-50%)
safety equipment: 1 x speed monitor. 4 x alignment switch; 2 x pull emergency stop switches EXECUTION: NORMAL BELT WIDTH: 1000 MM TORSION: 19.5 &ACIRC;&DEG; LINES: HORIZONTAL - VERTICAL - HORIZONTAL LENGTH: L = 33741 MM (APPROX. 8018/ 12796 / 12927 MM) CONVEYOR BELT: GB = FLEXOWELL F240S - 1000 MM, L = 70 M OPEN ARRANGEMENTS: SN-528 DRIVE DRUM, WHETHER. PULLEY, WHETHER. DEFLECTION); SN-513 (KNOCKING DRUM); SN-522 (UNT. DEFLECTION, UNT. PULLEY, SPANNTRTOMMEL); SN-511 (STUB ROLES); UCP-208 (ROLLERS) BELT GUIDE: FGR-260 WITH BEARINGS UCF-206 BELT CLEANING: 2 X PLOW SCRAPERS, 2 X WASHERS WIPERS DRIVE UNIT: BK70-54VL/D13LA4-S/E075B9/SP DRIVE CAPACITY: 9,5 KW SPEED DRIVE SHAFT: 31.5 RPM CAPACITY: 31 T / H CONVEYOR SPEED: 0.98 M/S CONVEYED GOODS: WET WOOD CHIPS BULK WEIGHT: 0.31 T / M &ACIRC;&SUP3; (0.300 - 0.350 T / M &ACIRC;&SUP3;) HUMIDITY: 35% (20-50%) SAFETY EQUIPMENT: 1 X SPEED MONITOR. 4 X ALIGNMENT SWITCH; 2 X PULL EMERGENCY STOP SWITCHES
Vendedor: NIAGARA WORLDWIDE
Año de construcción: usado
Ubicación: Land-type: lwkf-1000
execution: normal
belt width: 1000 mm
torsion: 3â°
lines: horizontal vertical horizontal
length: l = 30,200 mm (approx. 4.297 / 12.796 / 12927 mm)
conveyor belt: gb = flexowell f240s - 1,000 mm, l = 62.7 m open
arrangements: sn-528 (drive drum, whether.) pulley, whether. deflection); sn-513 (knocking drum); sn-522 (unt. deflection, unt. idler tension drum); sn-511 (stub roles); ucp-208 (rollers)
belt guide: fgr-260 with bearings ucf-206
belt cleaning: 2 x plow scrapers, 2 x disc scrapers
drive unit: bk70-54vl/d13la4-s/e075b9/sp
drive capacity: 9,5 kw
speed drive shaft: 31.5 rpm
capacity: 18 t / h
conveyor speed: 0.98 m/s
conveyed goods: old wood chips
bulk weight: 0.18 t / m â³ (0.170 0.250 t / m â³)
humidity: 15% (10-20%)
safety equipment: 1 x speed monitor, 4 x alignment switch, 2 x pull emergency stop switches TYPE: LWKF-1000 EXECUTION: NORMAL BELT WIDTH: 1000 MM TORSION: 3&ACIRC;&DEG; LINES: HORIZONTAL VERTICAL HORIZONTAL LENGTH: L = 30,200 MM (APPROX. 4.297 / 12.796 / 12927 MM) CONVEYOR BELT: GB = FLEXOWELL F240S - 1,000 MM, L = 62.7 M OPEN ARRANGEMENTS: SN-528 (DRIVE DRUM, WHETHER.) PULLEY, WHETHER. DEFLECTION); SN-513 (KNOCKING DRUM); SN-522 (UNT. DEFLECTION, UNT. IDLER TENSION DRUM); SN-511 (STUB ROLES); UCP-208 (ROLLERS) BELT GUIDE: FGR-260 WITH BEARINGS UCF-206 BELT CLEANING: 2 X PLOW SCRAPERS, 2 X DISC SCRAPERS DRIVE UNIT: BK70-54VL/D13LA4-S/E075B9/SP DRIVE CAPACITY: 9,5 KW SPEED DRIVE SHAFT: 31.5 RPM CAPACITY: 18 T / H CONVEYOR SPEED: 0.98 M/S CONVEYED GOODS: OLD WOOD CHIPS BULK WEIGHT: 0.18 T / M &ACIRC;&SUP3; (0.170 0.250 T / M &ACIRC;&SUP3;) HUMIDITY: 15% (10-20%) SAFETY EQUIPMENT: 1 X SPEED MONITOR, 4 X ALIGNMENT SWITCH, 2 X PULL EMERGENCY STOP SWITCHES
Vendedor: NIAGARA WORLDWIDE
Año de construcción: usado
Ubicación: Land-type: lwkf-1000
execution: normal
belt width: 1000 mm
torsion: 19.5 â°
lines: horizontal vertical horizontal
length: l = 33.741 mm (approx. 8,018/12.796/12.927 mm)
conveyor belt: flexowell f240s gb = 1,000 mm, l = 70 m open
arrangements: sn-528(antriebstrommel,ob.) pulley, whether. deflection); sn-513 (knocking drum); sn-522 (unt. deflection, unt. idler tension drum); sn-511 (stub roles); ucp-208 (rollers)
belt guide: fgr-260 with bearings ucf-206
belt cleaning: 2 x plow scrapers; 2 x disc scrapers
drive unit: bk70-54vl/d13la4-s/e075b9/sp
antriebsleisung: 9,5 kw
speed - drive shaft: 31.5 rpm
capacity: 31 t / h
conveyor speed: 0.98 m/s
conveyed goods: wet hachschnitzel
bulk weight: 0.31 t / m â³
humidity: 35% (20-50%)
safety equipment: 1 x speed monitor, 4 x alignment switch, 2 x pull emergency stop switches TYPE: LWKF-1000 EXECUTION: NORMAL BELT WIDTH: 1000 MM TORSION: 19.5 &ACIRC;&DEG; LINES: HORIZONTAL VERTICAL HORIZONTAL LENGTH: L = 33.741 MM (APPROX. 8,018/12.796/12.927 MM) CONVEYOR BELT: FLEXOWELL F240S GB = 1,000 MM, L = 70 M OPEN ARRANGEMENTS: SN-528(ANTRIEBSTROMMEL,OB.) PULLEY, WHETHER. DEFLECTION); SN-513 (KNOCKING DRUM); SN-522 (UNT. DEFLECTION, UNT. IDLER TENSION DRUM); SN-511 (STUB ROLES); UCP-208 (ROLLERS) BELT GUIDE: FGR-260 WITH BEARINGS UCF-206 BELT CLEANING: 2 X PLOW SCRAPERS; 2 X DISC SCRAPERS DRIVE UNIT: BK70-54VL/D13LA4-S/E075B9/SP ANTRIEBSLEISUNG: 9,5 KW SPEED - DRIVE SHAFT: 31.5 RPM CAPACITY: 31 T / H CONVEYOR SPEED: 0.98 M/S CONVEYED GOODS: WET HACHSCHNITZEL BULK WEIGHT: 0.31 T / M &ACIRC;&SUP3; HUMIDITY: 35% (20-50%) SAFETY EQUIPMENT: 1 X SPEED MONITOR, 4 X ALIGNMENT SWITCH, 2 X PULL EMERGENCY STOP SWITCHES
Vendedor: NIAGARA WORLDWIDE
Año de construcción: usado
Precio: 2.303 €
Ubicación: Land-camshaft for the brand of mwm engines: engine: mwm tcg 2016 v8 part no.: 12342754 CAMSHAFT FOR THE BRAND OF MWM ENGINES: ENGINE: MWM TCG 2016 V8 PART NO.: 12342754
Vendedor: ONERGYS GmbH
Año de construcción: usado
Precio: 23.000 €
Ubicación: Land-rated capacity tn 315
connecting rod n° 1
slide stroke mm 400
continuous stroke per minute n° 16
die space mm 670
die space adjustment in the ram mm 140
table dimensions
l to r mm 1000
f to b mm 1000
shim over table mm 160
hole in the table mm 630 x 630
ram dimensions
l to r mm 800
f to b mm 800
uprights opening dimensions
width mm 700
height mm 550
upper knockout
power tn 20
stroke mm 60
main motor power kw 45
overall dimensions
l to r mm 2900
f to b mm 3100
height above floor level mm 5580
press total weight tn 36    RATED CAPACITY TN 315 CONNECTING ROD N° 1 SLIDE STROKE MM 400 CONTINUOUS STROKE PER MINUTE N° 16 DIE SPACE MM 670 DIE SPACE ADJUSTMENT IN THE RAM MM 140 TABLE DIMENSIONS L TO R MM 1000 F TO B MM 1000 SHIM OVER TABLE MM 160 HOLE IN THE TABLE MM 630 X 630 RAM DIMENSIONS L TO R MM 800 F TO B MM 800 UPRIGHTS OPENING DIMENSIONS WIDTH MM 700 HEIGHT MM 550 UPPER KNOCKOUT POWER TN 20 STROKE MM 60 MAIN MOTOR POWER KW 45 OVERALL DIMENSIONS L TO R MM 2900 F TO B MM 3100 HEIGHT ABOVE FLOOR LEVEL MM 5580 PRESS TOTAL WEIGHT TN 36
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Ubicación: Land-we offer clients:

shredder ws 15 
working hours: 70 hours 
conveyor system system consisting of: 
-conveyor belt under ws 15 with knock role 
-permanent magnet with steel construction 
-conveyor belt 
the machine was installed two months ago and is in like new condition. from store stock.      WE OFFER CLIENTS: SHREDDER WS 15 WORKING HOURS: 70 HOURS CONVEYOR SYSTEM SYSTEM CONSISTING OF: -CONVEYOR BELT UNDER WS 15 WITH KNOCK ROLE -PERMANENT MAGNET WITH STEEL CONSTRUCTION -CONVEYOR BELT THE MACHINE WAS INSTALLED TWO MONTHS AGO AND IS IN LIKE NEW CONDITION. FROM STORE STOCK.
Vendedor: Diebels GbR, Recyclingmaschinen
Año de construcción: usado
Ubicación: Land-front axle with power steering ( incl . steering orbitrol ) , disc brakes , adjustable coil springs and dampers .
rear axle with quaife differential gear , adjustable coil springs and dampers .
welded construction , exterior width total about 2200 mm , tires multitrac
little hand , knocked out nothing .  FRONT AXLE WITH POWER STEERING ( INCL . STEERING ORBITROL ) , DISC BRAKES , ADJUSTABLE COIL SPRINGS AND DAMPERS . REAR AXLE WITH QUAIFE DIFFERENTIAL GEAR , ADJUSTABLE COIL SPRINGS AND DAMPERS . WELDED CONSTRUCTION , EXTERIOR WIDTH TOTAL ABOUT 2200 MM , TIRES MULTITRAC LITTLE HAND , KNOCKED OUT NOTHING .
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Ubicación: Land-front axle with hydraulic power steering (included steeringcontroller), disc brakes, adjustable coil springs and shock absorbers.

rear axle with quaife differential gear, adjustable coil springs and dampers.
welded construction, outer width total approx. 2200 mm, tyres multitrac.

less working-hours, nothing knocked out. bids requested.   FRONT AXLE WITH HYDRAULIC POWER STEERING (INCLUDED STEERINGCONTROLLER), DISC BRAKES, ADJUSTABLE COIL SPRINGS AND SHOCK ABSORBERS. REAR AXLE WITH QUAIFE DIFFERENTIAL GEAR, ADJUSTABLE COIL SPRINGS AND DAMPERS. WELDED CONSTRUCTION, OUTER WIDTH TOTAL APPROX. 2200 MM, TYRES MULTITRAC. LESS WORKING-HOURS, NOTHING KNOCKED OUT. BIDS REQUESTED.
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Ubicación: Land-make:kojima(japan)
year:2009
 
type: 4 columns push down

pressing capacity           9000 ton
table  area                         1800 x 2500 mm
slide   area                         1800 x 2500 mm
stroke                                  1300 mm
daylight opening             2700 mm
pressing speed                 3 to 9.5 mm/sec
descending speed            100-160 mm/sec
 
knock-out(upper side)
type:hydraulic cylinder type
capacity:40 ton
stroke:150 mm
ascending speed            150 mm/sec
 
knock-out(lower side)
type:hydraulic cylinder type
capacity:100 ton
stroke:300 mm
descending speed            150 mm/sec
  ascending speed            150 mm/sec
  

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567


 MAKE:KOJIMA(JAPAN) YEAR:2009 TYPE: 4 COLUMNS PUSH DOWN PRESSING CAPACITY 9000 TON TABLE AREA 1800 X 2500 MM SLIDE AREA 1800 X 2500 MM STROKE 1300 MM DAYLIGHT OPENING 2700 MM PRESSING SPEED 3 TO 9.5 MM/SEC DESCENDING SPEED 100-160 MM/SEC KNOCK-OUT(UPPER SIDE) TYPE:HYDRAULIC CYLINDER TYPE CAPACITY:40 TON STROKE:150 MM ASCENDING SPEED 150 MM/SEC KNOCK-OUT(LOWER SIDE) TYPE:HYDRAULIC CYLINDER TYPE CAPACITY:100 TON STROKE:300 MM DESCENDING SPEED 150 MM/SEC ASCENDING SPEED 150 MM/SEC BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-pneumatic knocker
from a commons resolution
new pneumatic beater in various sizes available
to dispose inexpensive
if you are interested please request PNEUMATIC KNOCKER FROM A COMMONS RESOLUTION NEW PNEUMATIC BEATER IN VARIOUS SIZES AVAILABLE TO DISPOSE INEXPENSIVE IF YOU ARE INTERESTED PLEASE REQUEST
Vendedor: Maschinen und Mühlenbau Benker
Año de construcción: usado
Ubicación: Land-material: stainless steel v2a
year of construction: 2004
drive: 4 kw
weight: 1250 kg.

area per deck: 1.9 m².
optional: ball knocking cleaning, basket of your choice: 0.1-20 mm. MATERIAL: STAINLESS STEEL V2A YEAR OF CONSTRUCTION: 2004 DRIVE: 4 KW WEIGHT: 1250 KG. AREA PER DECK: 1.9 M&SUP2;. OPTIONAL: BALL KNOCKING CLEANING, BASKET OF YOUR CHOICE: 0.1-20 MM.
Vendedor: Minox Maschinenhandels GmbH
Año de construcción: usado
Ubicación: Land-material: mild steel
year of construction: 2003
drive: 5.5 kw
weight: 2150 kg

area per deck: 5.3 m2
machine fully reconditioned with new bearings.
optional: ball knocking cleaning, basket of your choice: 0.1-20 mm. MATERIAL: MILD STEEL YEAR OF CONSTRUCTION: 2003 DRIVE: 5.5 KW WEIGHT: 2150 KG AREA PER DECK: 5.3 M2 MACHINE FULLY RECONDITIONED WITH NEW BEARINGS. OPTIONAL: BALL KNOCKING CLEANING, BASKET OF YOUR CHOICE: 0.1-20 MM.
Vendedor: Minox Maschinenhandels GmbH
Año de construcción: usado
Ubicación: Land-area per deck: 1,1 m2.
optional: ball knocking cleaning, basket of your choice: 0.1-20 mm.
weight: 950 kg
drive: 2,2 kw. AREA PER DECK: 1,1 M2. OPTIONAL: BALL KNOCKING CLEANING, BASKET OF YOUR CHOICE: 0.1-20 MM. WEIGHT: 950 KG DRIVE: 2,2 KW.
Vendedor: Minox Maschinenhandels GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more NOCK types: