269 ofertas

Año de construcción: usado
Ubicación: Land-
automatic folder-gluer machine 
pneumatic 
max size 710 mm 
min size 125 mm 
max speed 100 mt/min 
hot melt with electronic system 
norson gluer pro blue 7 
4 guns 
nordson eclipse series epc 30 
touch screen digital program 
several molds 
cd device 
folder device 
immaculate conditions 
free of damages 
very well maintain, onw owner from new 
ready for test, under power 
available immediately AUTOMATIC FOLDER-GLUER MACHINE PNEUMATIC MAX SIZE 710 MM MIN SIZE 125 MM MAX SPEED 100 MT/MIN HOT MELT WITH ELECTRONIC SYSTEM NORSON GLUER PRO BLUE 7 4 GUNS NORDSON ECLIPSE SERIES EPC 30 TOUCH SCREEN DIGITAL PROGRAM SEVERAL MOLDS CD DEVICE FOLDER DEVICE IMMACULATE CONDITIONS FREE OF DAMAGES VERY WELL MAINTAIN, ONW OWNER FROM NEW READY FOR TEST, UNDER POWER AVAILABLE IMMEDIATELY
Vendedor: ICD
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 110 kg<br/>dimensions (l x w x h) approx.: 1000 x 900 x 1000 mm<br/>description: nordson mc 24 premelting unit<br> serial number lu06d03037<br> voltage 400 v<br> maximum pressure 16 bar<br> ce standards WEIGHT APPROX.: 110 KG
DIMENSIONS (L X W X H) APPROX.: 1000 X 900 X 1000 MM
DESCRIPTION: NORDSON MC 24 PREMELTING UNIT
SERIAL NUMBER LU06D03037
VOLTAGE 400 V
MAXIMUM PRESSURE 16 BAR
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-glass bottle filling line krones one way 54.000 bph
 
complete line for bottling beer, carbonated and non carbonated soft drinks in one way glass bottles at nominal capacity of 54 000 bph. it was delivered by krones in year 2000 and it was in operation till 2015 and is currently installed and powered. equipment is very well maintaned and it has a complete techncial documentation in english.
 
main characteristics
- capacity 54 000 bph at 0.33 liter bottles
- made by krones in year 2000, in operation till 2015 still installed
- bottle volumes 275, 330 ml and earlier also 660 ml bottles
- total operating hours approx 70.000
- one way line for new glass bottles
- secondary packaging kisters wraparound packer and khs innopac wsp a-m combi packer
- operation controls made with siemens simatic s7 plc system
- overall line efficiency 75 %

list of main equipment:

1. empty bottle pallet transport conveyor system, kensal, year 2010
2. empty bottle depalletiser, kettner pressant universal
- capacity 100 pallets / hour
- layer interleave removal device
- empty pallet stacking device, type 454, model lpmt with max 15 pallet magazine
- empty pallet transport conveyor system
3. empty bottle transport conveyors (mass flow), krones
4. empty bottle transport conveyors/reject lane (single file), krones
5. zero pressure single filer, krones
6. empty bottle inspector krones linatronic
7. filler monobloc (rinser-filler-capper) krones mecafill vk(2v)cf
- short tube filling system for beer and soft drinks with double pre-evacuation before filling
- 132 filling valves, two maxicrown (year 2007) 26 capping stations, one for crown and one for twist off caps
- maxicrown cap feeding system
- inbuilt monoblock cip system
- valve block with buffer tank
- change parts for all bottles sizes
8. full bottle transport conveyor system (filler - pasteuriser), krones
9. full bottle inspector krones checkmat type 707 with swing-push rejection
10. tunnel pasteuriser, sander hansen pb 17.9-504-42, machine number 622
- it has 7 zones total, 4 pasteurization and 3 regerative zones
- total process area 240 m2
- the pasteurizer was refurbished one year ago and it has new martahoon plastic betls and new gear drives.
11. full bottle transport conveyor system (pasteuriser - labellers), krones
12. two bottle driers (air knives)
13. two labelers krones solomatic 018-g88
- combined output between 54.000 bph
- cold glue system, both with two label stations for ready cut paper labels
- rotation l-r and r-l (oposite directions)
- inbuilt no-label checking and rejecting system
- bottle handling change parts and storage racks for parts
14. bottle marking system with
- two videojet inc date coders, model xl 170i uhs af (one for each labeler)
- two domino lazer marker, model dpx1500 digital (one for each labeler)
- two domino digital coder 3, model ddc3l, year 2010 (one for each labeler)
15. two label inspectors, krones checkmat type 707 (one for each line)
16. full bottle transport conveyor system (labelers - kisters) incl. labeler reject conveyor
17. wraparound packer khs kisters innopac wp 070v, year 2005, 70 cycle per min, various configurations with automatic carton feeding system
18. full bottle transport conveyor system (feeding loose bottles to kister combi)
19. khs combi packer, type innopac wsp a-m, year 2011, machine number k-89403431- 000100, max 58 cycles/min, with automatic carton feeding system
20. two finished pack coders, type videojet
21. two lock & pop device made by nordson, in year 2010
22. finished pack transport conveyors
23. finished pack transport spiral elevator made by ambaflex in 2000
24. related electrical control and mcc panels   GLASS BOTTLE FILLING LINE KRONES ONE WAY 54.000 BPH COMPLETE LINE FOR BOTTLING BEER, CARBONATED AND NON CARBONATED SOFT DRINKS IN ONE WAY GLASS BOTTLES AT NOMINAL CAPACITY OF 54 000 BPH. IT WAS DELIVERED BY KRONES IN YEAR 2000 AND IT WAS IN OPERATION TILL 2015 AND IS CURRENTLY INSTALLED AND POWERED. EQUIPMENT IS VERY WELL MAINTANED AND IT HAS A COMPLETE TECHNCIAL DOCUMENTATION IN ENGLISH. MAIN CHARACTERISTICS - CAPACITY 54 000 BPH AT 0.33 LITER BOTTLES - MADE BY KRONES IN YEAR 2000, IN OPERATION TILL 2015 STILL INSTALLED - BOTTLE VOLUMES 275, 330 ML AND EARLIER ALSO 660 ML BOTTLES - TOTAL OPERATING HOURS APPROX 70.000 - ONE WAY LINE FOR NEW GLASS BOTTLES - SECONDARY PACKAGING KISTERS WRAPAROUND PACKER AND KHS INNOPAC WSP A-M COMBI PACKER - OPERATION CONTROLS MADE WITH SIEMENS SIMATIC S7 PLC SYSTEM - OVERALL LINE EFFICIENCY 75 % LIST OF MAIN EQUIPMENT: 1. EMPTY BOTTLE PALLET TRANSPORT CONVEYOR SYSTEM, KENSAL, YEAR 2010 2. EMPTY BOTTLE DEPALLETISER, KETTNER PRESSANT UNIVERSAL - CAPACITY 100 PALLETS / HOUR - LAYER INTERLEAVE REMOVAL DEVICE - EMPTY PALLET STACKING DEVICE, TYPE 454, MODEL LPMT WITH MAX 15 PALLET MAGAZINE - EMPTY PALLET TRANSPORT CONVEYOR SYSTEM 3. EMPTY BOTTLE TRANSPORT CONVEYORS (MASS FLOW), KRONES 4. EMPTY BOTTLE TRANSPORT CONVEYORS/REJECT LANE (SINGLE FILE), KRONES 5. ZERO PRESSURE SINGLE FILER, KRONES 6. EMPTY BOTTLE INSPECTOR KRONES LINATRONIC 7. FILLER MONOBLOC (RINSER-FILLER-CAPPER) KRONES MECAFILL VK(2V)CF - SHORT TUBE FILLING SYSTEM FOR BEER AND SOFT DRINKS WITH DOUBLE PRE-EVACUATION BEFORE FILLING - 132 FILLING VALVES, TWO MAXICROWN (YEAR 2007) 26 CAPPING STATIONS, ONE FOR CROWN AND ONE FOR TWIST OFF CAPS - MAXICROWN CAP FEEDING SYSTEM - INBUILT MONOBLOCK CIP SYSTEM - VALVE BLOCK WITH BUFFER TANK - CHANGE PARTS FOR ALL BOTTLES SIZES 8. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FILLER - PASTEURISER), KRONES 9. FULL BOTTLE INSPECTOR KRONES CHECKMAT TYPE 707 WITH SWING-PUSH REJECTION 10. TUNNEL PASTEURISER, SANDER HANSEN PB 17.9-504-42, MACHINE NUMBER 622 - IT HAS 7 ZONES TOTAL, 4 PASTEURIZATION AND 3 REGERATIVE ZONES - TOTAL PROCESS AREA 240 M2 - THE PASTEURIZER WAS REFURBISHED ONE YEAR AGO AND IT HAS NEW MARTAHOON PLASTIC BETLS AND NEW GEAR DRIVES. 11. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (PASTEURISER - LABELLERS), KRONES 12. TWO BOTTLE DRIERS (AIR KNIVES) 13. TWO LABELERS KRONES SOLOMATIC 018-G88 - COMBINED OUTPUT BETWEEN 54.000 BPH - COLD GLUE SYSTEM, BOTH WITH TWO LABEL STATIONS FOR READY CUT PAPER LABELS - ROTATION L-R AND R-L (OPOSITE DIRECTIONS) - INBUILT NO-LABEL CHECKING AND REJECTING SYSTEM - BOTTLE HANDLING CHANGE PARTS AND STORAGE RACKS FOR PARTS 14. BOTTLE MARKING SYSTEM WITH - TWO VIDEOJET INC DATE CODERS, MODEL XL 170I UHS AF (ONE FOR EACH LABELER) - TWO DOMINO LAZER MARKER, MODEL DPX1500 DIGITAL (ONE FOR EACH LABELER) - TWO DOMINO DIGITAL CODER 3, MODEL DDC3L, YEAR 2010 (ONE FOR EACH LABELER) 15. TWO LABEL INSPECTORS, KRONES CHECKMAT TYPE 707 (ONE FOR EACH LINE) 16. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (LABELERS - KISTERS) INCL. LABELER REJECT CONVEYOR 17. WRAPAROUND PACKER KHS KISTERS INNOPAC WP 070V, YEAR 2005, 70 CYCLE PER MIN, VARIOUS CONFIGURATIONS WITH AUTOMATIC CARTON FEEDING SYSTEM 18. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FEEDING LOOSE BOTTLES TO KISTER COMBI) 19. KHS COMBI PACKER, TYPE INNOPAC WSP A-M, YEAR 2011, MACHINE NUMBER K-89403431- 000100, MAX 58 CYCLES/MIN, WITH AUTOMATIC CARTON FEEDING SYSTEM 20. TWO FINISHED PACK CODERS, TYPE VIDEOJET 21. TWO LOCK & POP DEVICE MADE BY NORDSON, IN YEAR 2010 22. FINISHED PACK TRANSPORT CONVEYORS 23. FINISHED PACK TRANSPORT SPIRAL ELEVATOR MADE BY AMBAFLEX IN 2000 24. RELATED ELECTRICAL CONTROL AND MCC PANELS
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 8.000 €
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 3500 x 2000 x 3150 mm<br/>description: max workable width 1200 mm<br> max workable height 450 mm<br> see photos<br> <b>exclusively loadable on low-loader truck. otherwise it will be charged extra cost for machinery dismantling and loading</b> WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 3500 X 2000 X 3150 MM
DESCRIPTION: MAX WORKABLE WIDTH 1200 MM
MAX WORKABLE HEIGHT 450 MM
SEE PHOTOS
EXCLUSIVELY LOADABLE ON LOW-LOADER TRUCK. OTHERWISE IT WILL BE CHARGED EXTRA COST FOR MACHINERY DISMANTLING AND LOADING
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-tunnel pasteurizer krones - sander hansen 50 000 pet /h

this machine was initially delivered and installed in 2007. it is two deck design with 5 pasteurization zones and 5 cooling zones. total treatment area is 276 m2 and heating media is saturated steam 3-9 bars. it has been only used approx 500 working hours for ice water and ice tea in pet bottles. the belts were changed and they have been operated only approx 100 working hours since belt change. the machine has been kept under maintenance and it is in excellent conditions.

technical specifications:

manufacturing year: 2007
make: krones - sander hansen
running hours: approx 500
condition: excellent condition
current location central america
availability: immediately
current status: installed
operating system: siemens s 7 plc, english language
treatment area: 276 m2
weigth (empty): 63.000 kg
weight (full / approx.): 143.00 kg
water volume in zones: 22.7 m3
water volume in buffers: 20 m3
material zones: stainless steel
number of decks: 2
number of belts: 2
number of regenerative zones: 5
number of pasteurization zones: 5
number of additional cooling zones: 1
belt width: 5.58 m
external width (including pumps and ops): 7.68 m
total length (ex. platforms): 27.00 m
platforms (front / back): +1m / side approx.
pump side from infeed: left
type of infeed conveyor: rexnord, 5 track, plastic, 425mm
type of out feed conveyor: rexnord, 5 track, plastic, 425mm
heating media: saturated steam at 3-9 bar, capacity 3370 kw
water – design flow: 85.3 m3/h
air consumption: 5 m3/h
conveyor type: intralox raised rip 400
conveyor status: perfect
conveyor material: polypropylene
main drive: planetary gear
electrical supply, phases: 3
voltage: 460 v ac
tolerances: +/- 10%
frequency: 60 hz   TUNNEL PASTEURIZER KRONES - SANDER HANSEN 50 000 PET /H THIS MACHINE WAS INITIALLY DELIVERED AND INSTALLED IN 2007. IT IS TWO DECK DESIGN WITH 5 PASTEURIZATION ZONES AND 5 COOLING ZONES. TOTAL TREATMENT AREA IS 276 M2 AND HEATING MEDIA IS SATURATED STEAM 3-9 BARS. IT HAS BEEN ONLY USED APPROX 500 WORKING HOURS FOR ICE WATER AND ICE TEA IN PET BOTTLES. THE BELTS WERE CHANGED AND THEY HAVE BEEN OPERATED ONLY APPROX 100 WORKING HOURS SINCE BELT CHANGE. THE MACHINE HAS BEEN KEPT UNDER MAINTENANCE AND IT IS IN EXCELLENT CONDITIONS. TECHNICAL SPECIFICATIONS: MANUFACTURING YEAR: 2007 MAKE: KRONES - SANDER HANSEN RUNNING HOURS: APPROX 500 CONDITION: EXCELLENT CONDITION CURRENT LOCATION CENTRAL AMERICA AVAILABILITY: IMMEDIATELY CURRENT STATUS: INSTALLED OPERATING SYSTEM: SIEMENS S 7 PLC, ENGLISH LANGUAGE TREATMENT AREA: 276 M2 WEIGTH (EMPTY): 63.000 KG WEIGHT (FULL / APPROX.): 143.00 KG WATER VOLUME IN ZONES: 22.7 M3 WATER VOLUME IN BUFFERS: 20 M3 MATERIAL ZONES: STAINLESS STEEL NUMBER OF DECKS: 2 NUMBER OF BELTS: 2 NUMBER OF REGENERATIVE ZONES: 5 NUMBER OF PASTEURIZATION ZONES: 5 NUMBER OF ADDITIONAL COOLING ZONES: 1 BELT WIDTH: 5.58 M EXTERNAL WIDTH (INCLUDING PUMPS AND OPS): 7.68 M TOTAL LENGTH (EX. PLATFORMS): 27.00 M PLATFORMS (FRONT / BACK): +1M / SIDE APPROX. PUMP SIDE FROM INFEED: LEFT TYPE OF INFEED CONVEYOR: REXNORD, 5 TRACK, PLASTIC, 425MM TYPE OF OUT FEED CONVEYOR: REXNORD, 5 TRACK, PLASTIC, 425MM HEATING MEDIA: SATURATED STEAM AT 3-9 BAR, CAPACITY 3370 KW WATER – DESIGN FLOW: 85.3 M3/H AIR CONSUMPTION: 5 M3/H CONVEYOR TYPE: INTRALOX RAISED RIP 400 CONVEYOR STATUS: PERFECT CONVEYOR MATERIAL: POLYPROPYLENE MAIN DRIVE: PLANETARY GEAR ELECTRICAL SUPPLY, PHASES: 3 VOLTAGE: 460 V AC TOLERANCES: +/- 10% FREQUENCY: 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-weight approx.: 5000 kg<br/>dimensions (l x w x h) approx.: 7500 x 1900 x 1850 mm<br/>description: total length of the machine 5,000 mm, maximum chain opening of 900 mm, step length 250 - 1,000 mm, interval 100 mm, application width 1,000 mm, running surface and taper diameter 60 75 ÷ 150 mm, power of 2.2 kw conveyor motor, heating power of 4 kw heating elements, motor power of 0.75 kw, power supply for 4 air heaters (not included) 4x 3 = 12 kw, power supply for 4 ir lamps (not included) 4x 1 = 4 kw, total power 23 kw, adjustable, feed rate 6 ÷ 30 m / min , working height 1,000 mm, three-phase zero-earth connection 400 volts., frequency 50 hz standard, required air pressure 6 bar. nordson 200 (pur) adhesive melter WEIGHT APPROX.: 5000 KG
DIMENSIONS (L X W X H) APPROX.: 7500 X 1900 X 1850 MM
DESCRIPTION: TOTAL LENGTH OF THE MACHINE 5,000 MM, MAXIMUM CHAIN OPENING OF 900 MM, STEP LENGTH 250 - 1,000 MM, INTERVAL 100 MM, APPLICATION WIDTH 1,000 MM, RUNNING SURFACE AND TAPER DIAMETER 60 75 ÷ 150 MM, POWER OF 2.2 KW CONVEYOR MOTOR, HEATING POWER OF 4 KW HEATING ELEMENTS, MOTOR POWER OF 0.75 KW, POWER SUPPLY FOR 4 AIR HEATERS (NOT INCLUDED) 4X 3 = 12 KW, POWER SUPPLY FOR 4 IR LAMPS (NOT INCLUDED) 4X 1 = 4 KW, TOTAL POWER 23 KW, ADJUSTABLE, FEED RATE 6 ÷ 30 M / MIN , WORKING HEIGHT 1,000 MM, THREE-PHASE ZERO-EARTH CONNECTION 400 VOLTS., FREQUENCY 50 HZ STANDARD, REQUIRED AIR PRESSURE 6 BAR. NORDSON 200 (PUR) ADHESIVE MELTER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-brewhouse huppmann 410 hl / brew - approx 1 m hl / year

brewhouse made by huppmann in year 2000, 410 hl/brew, with a mash filter, made by nordon in year 1997. it is complete line, in good condition, not dismantled, it is possible to test the equipment. the brewhouse is controlled by pc.

installed mash filter nordon improves the performance of brewing process (compare to filer tank) and allows the use in the production low quality (dusty) malt and the filtration speed and quality do not change.

capacity: mash tank - 410 hl/brew, malt 9 tn. per brew, 12 brews per day
bottle neck is mash tank. brewhouse capacity can be doubled by installation of second mash tank.

list of equipment:
- mash tank huppmann, 410 hl, 4200 mm diameter, malt 9 tons per brew, capacity 12 brews per day, year 2002
- mash tank heat exchanger, api schmidt-bretten type: si 108 sbl, year 2000
- ferments dosing system by prominent with 3 x 500 liter pvc tanks
- mash filter nordon, 53 plates, 1997
- wort collecting tank, horizontal, 410 hl
- wort kettle huppmann, 930 hl, 5200 mm diameter, the heating boiler surface - 55 m2, 2002. boiling of the wort runs at high pressure that allows to reach temperature of 104 - 106 c,
- hop dosing tanks, huppmann 3 x 235 liters, year 1998
- heat exchanger of wort kettle, apv type k55,year 1998
- whirlpool huppmann, 650 hl, diameter 5800 mm, year 2002
- press-filter buffer tanks, huppmann, 1999
- tank for collecting protein
- piping, pumps, valves, etc.
- computer control system of brewhouse based on the pc.   BREWHOUSE HUPPMANN 410 HL / BREW - APPROX 1 M HL / YEAR BREWHOUSE MADE BY HUPPMANN IN YEAR 2000, 410 HL/BREW, WITH A MASH FILTER, MADE BY NORDON IN YEAR 1997. IT IS COMPLETE LINE, IN GOOD CONDITION, NOT DISMANTLED, IT IS POSSIBLE TO TEST THE EQUIPMENT. THE BREWHOUSE IS CONTROLLED BY PC. INSTALLED MASH FILTER NORDON IMPROVES THE PERFORMANCE OF BREWING PROCESS (COMPARE TO FILER TANK) AND ALLOWS THE USE IN THE PRODUCTION LOW QUALITY (DUSTY) MALT AND THE FILTRATION SPEED AND QUALITY DO NOT CHANGE. CAPACITY: MASH TANK - 410 HL/BREW, MALT 9 TN. PER BREW, 12 BREWS PER DAY BOTTLE NECK IS MASH TANK. BREWHOUSE CAPACITY CAN BE DOUBLED BY INSTALLATION OF SECOND MASH TANK. LIST OF EQUIPMENT: - MASH TANK HUPPMANN, 410 HL, 4200 MM DIAMETER, MALT 9 TONS PER BREW, CAPACITY 12 BREWS PER DAY, YEAR 2002 - MASH TANK HEAT EXCHANGER, API SCHMIDT-BRETTEN TYPE: SI 108 SBL, YEAR 2000 - FERMENTS DOSING SYSTEM BY PROMINENT WITH 3 X 500 LITER PVC TANKS - MASH FILTER NORDON, 53 PLATES, 1997 - WORT COLLECTING TANK, HORIZONTAL, 410 HL - WORT KETTLE HUPPMANN, 930 HL, 5200 MM DIAMETER, THE HEATING BOILER SURFACE - 55 M2, 2002. BOILING OF THE WORT RUNS AT HIGH PRESSURE THAT ALLOWS TO REACH TEMPERATURE OF 104 - 106 C, - HOP DOSING TANKS, HUPPMANN 3 X 235 LITERS, YEAR 1998 - HEAT EXCHANGER OF WORT KETTLE, APV TYPE K55,YEAR 1998 - WHIRLPOOL HUPPMANN, 650 HL, DIAMETER 5800 MM, YEAR 2002 - PRESS-FILTER BUFFER TANKS, HUPPMANN, 1999 - TANK FOR COLLECTING PROTEIN - PIPING, PUMPS, VALVES, ETC. - COMPUTER CONTROL SYSTEM OF BREWHOUSE BASED ON THE PC.
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 140 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 450 x 450 x 450 mm<br/>description: further details unknown WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 450 X 450 X 450 MM
DESCRIPTION: FURTHER DETAILS UNKNOWN
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-beer mash filter press nortek hd 800 hl /h
 
this mash filter was manufactured by belgium nordon in year 1998 and it is still installed in st.petersburg, russia. it was filtrating mash from two mash kettles, each 410 hl/brew, 12 brews per day. the equipment is in good condition.
 
capacity: 9 ton malt in one brew, 12 brews per day, one brew 410 hl > 4920 hl/day
manufacturer: nordon, france
manufacturing year: 1998
filter plates: 53 plates, plate size 2 x 2 m
 
the scope of suply:
- automatic norden mash filter
- set of automatic valves &equipments
- set of instrumentation
- air thrust system
- control valves for sparge water
- spend grains screw & expeller
- additional abv & instrumentation
- mash pump
- control & power cabinet
- wort buffer tank

total net weight: 32 020 kg.
total gross weight: 37 660 kg.   BEER MASH FILTER PRESS NORTEK HD 800 HL /H THIS MASH FILTER WAS MANUFACTURED BY BELGIUM NORDON IN YEAR 1998 AND IT IS STILL INSTALLED IN ST.PETERSBURG, RUSSIA. IT WAS FILTRATING MASH FROM TWO MASH KETTLES, EACH 410 HL/BREW, 12 BREWS PER DAY. THE EQUIPMENT IS IN GOOD CONDITION. CAPACITY: 9 TON MALT IN ONE BREW, 12 BREWS PER DAY, ONE BREW 410 HL > 4920 HL/DAY MANUFACTURER: NORDON, FRANCE MANUFACTURING YEAR: 1998 FILTER PLATES: 53 PLATES, PLATE SIZE 2 X 2 M THE SCOPE OF SUPLY: - AUTOMATIC NORDEN MASH FILTER - SET OF AUTOMATIC VALVES &EQUIPMENTS - SET OF INSTRUMENTATION - AIR THRUST SYSTEM - CONTROL VALVES FOR SPARGE WATER - SPEND GRAINS SCREW & EXPELLER - ADDITIONAL ABV & INSTRUMENTATION - MASH PUMP - CONTROL & POWER CABINET - WORT BUFFER TANK TOTAL NET WEIGHT: 32 020 KG. TOTAL GROSS WEIGHT: 37 660 KG.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec sleeveshrink high speed sleeve shrink machine for bottles/cans (with tray) - ty45<br><br>high speed sleeve shrinking machine to do multipacks of bottles, cans, etc. including module to build up (nordson glue system) and add a tray underneath the multipack. including shrink tunnel. suitable to do 2x3, 3x4, 4x6 or other arrangements of containers. suitable for pe shrink film with a thickness of 60-100µm and a film transverse contraction ratio of 30-40% and a longitudional contraction ratio of 60-70%. <br><br>- specifications: siemens plc control and siemens touchscreen, schneider contactor, festo cylinder, siemens servo motors to feed and cut the film | bottle (can or container) size: 0.25 to 1.5 liter, diameter: 55-120mm, height: 120-300mm | max. dimensions for the complete multipack: l(150-720)xw(250-450)xh(120-300)mm | max. speed of the machine in neutral: 50 cycles/minute | total dimensions: l10070xw1650xh2485mm | weight: 5600kg | power: 380v, 13kw (machine) and 380v, 63.75kw (shrink tunnel) | compressed air: 160 liter/min, 6bar.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SLEEVESHRINK HIGH SPEED SLEEVE SHRINK MACHINE FOR BOTTLES/CANS (WITH TRAY) - TY45

HIGH SPEED SLEEVE SHRINKING MACHINE TO DO MULTIPACKS OF BOTTLES, CANS, ETC. INCLUDING MODULE TO BUILD UP (NORDSON GLUE SYSTEM) AND ADD A TRAY UNDERNEATH THE MULTIPACK. INCLUDING SHRINK TUNNEL. SUITABLE TO DO 2X3, 3X4, 4X6 OR OTHER ARRANGEMENTS OF CONTAINERS. SUITABLE FOR PE SHRINK FILM WITH A THICKNESS OF 60-100µM AND A FILM TRANSVERSE CONTRACTION RATIO OF 30-40% AND A LONGITUDIONAL CONTRACTION RATIO OF 60-70%.

- SPECIFICATIONS: SIEMENS PLC CONTROL AND SIEMENS TOUCHSCREEN, SCHNEIDER CONTACTOR, FESTO CYLINDER, SIEMENS SERVO MOTORS TO FEED AND CUT THE FILM | BOTTLE (CAN OR CONTAINER) SIZE: 0.25 TO 1.5 LITER, DIAMETER: 55-120MM, HEIGHT: 120-300MM | MAX. DIMENSIONS FOR THE COMPLETE MULTIPACK: L(150-720)XW(250-450)XH(120-300)MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 50 CYCLES/MINUTE | TOTAL DIMENSIONS: L10070XW1650XH2485MM | WEIGHT: 5600KG | POWER: 380V, 13KW (MACHINE) AND 380V, 63.75KW (SHRINK TUNNEL) | COMPRESSED AIR: 160 LITER/MIN, 6BAR.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-double power bag with grip hole reinforcement
equipped with:
usable welding and cutting width: 850 mm
bag width (feed length): 220-600 mm
bag height: 280-600 mm
number of lanes 1
maximum number of cycles (cycles / min) 70 cycles / minute
max unwind width 1200 mm
max unwinding diameter 1100 mm
servo
edge guide
photo cell
including - nordson gluing plant of 2002
 DOUBLE POWER BAG WITH GRIP HOLE REINFORCEMENT EQUIPPED WITH: USABLE WELDING AND CUTTING WIDTH: 850 MM BAG WIDTH (FEED LENGTH): 220-600 MM BAG HEIGHT: 280-600 MM NUMBER OF LANES 1 MAXIMUM NUMBER OF CYCLES (CYCLES / MIN) 70 CYCLES / MINUTE MAX UNWIND WIDTH 1200 MM MAX UNWINDING DIAMETER 1100 MM SERVO EDGE GUIDE PHOTO CELL INCLUDING - NORDSON GLUING PLANT OF 2002
Vendedor: Serin Graphische Maschinen
Año de construcción: usado
Ubicación: Land-        <br />accessories: gluing station nordson serie 3400<br />
ACCESSORIES: GLUING STATION NORDSON SERIE 3400
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Precio: 29.500 €
Ubicación: Land-four side planer weinig profimat 45 wide planing machine, spindles: 4, spindelanordnung_ down - right - left - up,.
working width: 450 mm height: 260 mm.  FOUR SIDE PLANER WEINIG PROFIMAT 45 WIDE PLANING MACHINE, SPINDLES: 4, SPINDELANORDNUNG_ DOWN - RIGHT - LEFT - UP,. WORKING WIDTH: 450 MM HEIGHT: 260 MM.
Vendedor: OCHMANN Holzbearbeitungsmaschinen
Año de construcción: usado
Ubicación: Land-capacity: 11000  packs/h      <br />formats:  8 x1,5 liter<br />operation / control:  systems lauer<br />accessories: gluing station nordson serie 35<br /> CAPACITY: 11000 PACKS/H
FORMATS: 8 X1,5 LITER
OPERATION / CONTROL: SYSTEMS LAUER
ACCESSORIES: GLUING STATION NORDSON SERIE 35
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-noll can line 3- 1981 - 36,000 cph -250ml slim and 330,355,500ml standard cans			
#	make	description	model no.
1	noll	depalletizer	lord vb 500k
2	noll	empty can conveyor	z3094862
3	noll	can rinser	-
4	noll	filling machine	ah-48
5	angelus	seamer	61h
6	noll	mixomat	s-g12
7	anton paar	anton paar analyzer	cobrix 2
8	filtec	filled can rejector	ft-50
9	noll	full can conveyor	1981
10	noll	can warmer	ds 6000
11	videojet	s2-date coder 8	videojet 170i
12	videojet	s2-date coder 9	videojet 170i
13	khs kister	noll 1 kister packer	97/40
14	khs kister	shrink tunnel	97/40
15	nordson	glue applicator	nordson
16	graphic packing	riverwood, multipack-cube	twinstack
17	nordson	glue applicator	nordson
18	nordson	glue applicator	nordson
19	marsh unicorn	s2-tray coder	marsh unicorn
20	noll	case conveyor	1981
21	noll	palletizer	lord vb 500k
22	m.j.maillis	pallet wrapping machine-siat	typ 16
23	cimpack 300	pallet tag applicator	cimpack 300

for full information visit abc.beveragexchange.co.uk
   NOLL CAN LINE 3- 1981 - 36,000 CPH -250ML SLIM AND 330,355,500ML STANDARD CANS # MAKE DESCRIPTION MODEL NO. 1 NOLL DEPALLETIZER LORD VB 500K 2 NOLL EMPTY CAN CONVEYOR Z3094862 3 NOLL CAN RINSER - 4 NOLL FILLING MACHINE AH-48 5 ANGELUS SEAMER 61H 6 NOLL MIXOMAT S-G12 7 ANTON PAAR ANTON PAAR ANALYZER COBRIX 2 8 FILTEC FILLED CAN REJECTOR FT-50 9 NOLL FULL CAN CONVEYOR 1981 10 NOLL CAN WARMER DS 6000 11 VIDEOJET S2-DATE CODER 8 VIDEOJET 170I 12 VIDEOJET S2-DATE CODER 9 VIDEOJET 170I 13 KHS KISTER NOLL 1 KISTER PACKER 97/40 14 KHS KISTER SHRINK TUNNEL 97/40 15 NORDSON GLUE APPLICATOR NORDSON 16 GRAPHIC PACKING RIVERWOOD, MULTIPACK-CUBE TWINSTACK 17 NORDSON GLUE APPLICATOR NORDSON 18 NORDSON GLUE APPLICATOR NORDSON 19 MARSH UNICORN S2-TRAY CODER MARSH UNICORN 20 NOLL CASE CONVEYOR 1981 21 NOLL PALLETIZER LORD VB 500K 22 M.J.MAILLIS PALLET WRAPPING MACHINE-SIAT TYP 16 23 CIMPACK 300 PALLET TAG APPLICATOR CIMPACK 300 FOR FULL INFORMATION VISIT ABC.BEVERAGEXCHANGE.CO.UK
Vendedor: Pennington (UK) Ltd
Año de construcción: usado
Precio: used machinery auction RESALE 56.900 €
Ubicación: Land-weight approx.: 18000 kg<br/>dimensions (l x w x h) approx.: 7000 x 2700 x 2600 mm<br/>description: - machine no.: 650033<br> - turning length of x/z: 1250 mm<br> - with y- and c-axis<br> - disc turret with 12 driven tool stations<br> - nominal voltage: 400 v<br> - control voltage: 24 v<br> - nominal current: 140 a<br> - nominal power: 80 kw<br> - main spindle d102, size: 11 - din 55026/55021 and iso 702/1<br> - workpiece passage: max. 102 mm<br> - speed: max. 3000 rpm<br> - diameter at front bearing: 170 mm<br> - power at main spindle 100/40% dc: 53/68 kw<br> - torque value: 675/900 nm<br> - ball screw spindle diameter: 40 mm<br> - working travel: 220 mm<br> - rapid traverse: 12 m/min<br> - feed force: 24000 n<br> - workpiece passage: 102 mm<br> - stroke: 48 mm<br> - clamping force max. tension: 10900 dn, pressure: 12000 dn<br> multifunction unit:<br> - speed max.: 6000/1500 rpm<br> - tools: hsk a63<br> - diameter at front bearing: 75 mm<br> - internal coolant supply<br> - tool driving device with two couplings ffor turret tools<br> - speed: max. 6000 rpm<br> - power at n= 300: 8,5 kw<br> - torque value: 34 nm<br> tailstock slide:<br> - ball screw spindle diameter: 50 mm<br> - distance between centres: 1300 mm<br> - working travel: 1250 mm<br> - rapid traverse: 10 m/min<br> - pressing force: 15000 n<br> - tailstock quill: sk 40<br> - bearing diameter: 65 mm<br> - workpiece weight: 500 kg<br> - machine is equipped with a tailstock, one steady rest as well as one three-jaw chuck and chip conveyor nord, type: sk 71l/4 and a paper belt filter unit knoll, type: ae 1050<br> - with complete documentation<br> - with siemens sinumerik 840 d cnc control system<br> - included in delivery is a big lot of machine accessories, consisting of many jaws, tool holders, lathe tools and more.<br> - attention: technical data without any warranty<br> - attention: axle locks and lifting beam must be returned after delivery of the machine!<br> - the machine has to be picked up on 13th or WEIGHT APPROX.: 18000 KG
DIMENSIONS (L X W X H) APPROX.: 7000 X 2700 X 2600 MM
DESCRIPTION: - MACHINE NO.: 650033
- TURNING LENGTH OF X/Z: 1250 MM
- WITH Y- AND C-AXIS
- DISC TURRET WITH 12 DRIVEN TOOL STATIONS
- NOMINAL VOLTAGE: 400 V
- CONTROL VOLTAGE: 24 V
- NOMINAL CURRENT: 140 A
- NOMINAL POWER: 80 KW
- MAIN SPINDLE D102, SIZE: 11 - DIN 55026/55021 AND ISO 702/1
- WORKPIECE PASSAGE: MAX. 102 MM
- SPEED: MAX. 3000 RPM
- DIAMETER AT FRONT BEARING: 170 MM
- POWER AT MAIN SPINDLE 100/40% DC: 53/68 KW
- TORQUE VALUE: 675/900 NM
- BALL SCREW SPINDLE DIAMETER: 40 MM
- WORKING TRAVEL: 220 MM
- RAPID TRAVERSE: 12 M/MIN
- FEED FORCE: 24000 N
- WORKPIECE PASSAGE: 102 MM
- STROKE: 48 MM
- CLAMPING FORCE MAX. TENSION: 10900 DN, PRESSURE: 12000 DN
MULTIFUNCTION UNIT:
- SPEED MAX.: 6000/1500 RPM
- TOOLS: HSK A63
- DIAMETER AT FRONT BEARING: 75 MM
- INTERNAL COOLANT SUPPLY
- TOOL DRIVING DEVICE WITH TWO COUPLINGS FFOR TURRET TOOLS
- SPEED: MAX. 6000 RPM
- POWER AT N= 300: 8,5 KW
- TORQUE VALUE: 34 NM
TAILSTOCK SLIDE:
- BALL SCREW SPINDLE DIAMETER: 50 MM
- DISTANCE BETWEEN CENTRES: 1300 MM
- WORKING TRAVEL: 1250 MM
- RAPID TRAVERSE: 10 M/MIN
- PRESSING FORCE: 15000 N
- TAILSTOCK QUILL: SK 40
- BEARING DIAMETER: 65 MM
- WORKPIECE WEIGHT: 500 KG
- MACHINE IS EQUIPPED WITH A TAILSTOCK, ONE STEADY REST AS WELL AS ONE THREE-JAW CHUCK AND CHIP CONVEYOR NORD, TYPE: SK 71L/4 AND A PAPER BELT FILTER UNIT KNOLL, TYPE: AE 1050
- WITH COMPLETE DOCUMENTATION
- WITH SIEMENS SINUMERIK 840 D CNC CONTROL SYSTEM
- INCLUDED IN DELIVERY IS A BIG LOT OF MACHINE ACCESSORIES, CONSISTING OF MANY JAWS, TOOL HOLDERS, LATHE TOOLS AND MORE.
- ATTENTION: TECHNICAL DATA WITHOUT ANY WARRANTY
- ATTENTION: AXLE LOCKS AND LIFTING BEAM MUST BE RETURNED AFTER DELIVERY OF THE MACHINE!
- THE MACHINE HAS TO BE PICKED UP ON 13TH OR
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 850 €
Ubicación: Land-
commercial refrigerator

nordcap

type: cb-ku 710

dimensions exterior: hxwxd = 200 x 75 x 83 cm
    dimensions in: hxwxd = 140 x 54 x 66 cm
    stainless steel cladding outside & inside
    temperature: 0 â° c / 8 â° c
    230 v / 50 hz / 350 w
    710 l capacity
    refrigerant: r134 a
    the grid shelves are height adjustable

see state original images! COMMERCIAL REFRIGERATOR NORDCAP TYPE: CB-KU 710 DIMENSIONS EXTERIOR: HXWXD = 200 X 75 X 83 CM DIMENSIONS IN: HXWXD = 140 X 54 X 66 CM STAINLESS STEEL CLADDING OUTSIDE & INSIDE TEMPERATURE: 0 &ACIRC;&DEG; C / 8 &ACIRC;&DEG; C 230 V / 50 HZ / 350 W 710 L CAPACITY REFRIGERANT: R134 A THE GRID SHELVES ARE HEIGHT ADJUSTABLE SEE STATE ORIGINAL IMAGES!
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 2.400 €
Ubicación: Land-weight approx.: 615 kg<br/>dimensions (l x w x h) approx.: 1550 x 800 x 1850 mm<br/>description: nordson pu melting unit used bm 5550 WEIGHT APPROX.: 615 KG
DIMENSIONS (L X W X H) APPROX.: 1550 X 800 X 1850 MM
DESCRIPTION: NORDSON PU MELTING UNIT USED BM 5550
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 6.000 €
Ubicación: Land- 
-automatic italian folder gluer grassi 90 
-year 1980,max width 90 cms. 
-only for linear gluing 
-can work any type of duplex and corrugated carton 
-hot glue system nordson with 2 spray guns 
-available immediately  -AUTOMATIC ITALIAN FOLDER GLUER GRASSI 90 -YEAR 1980,MAX WIDTH 90 CMS. -ONLY FOR LINEAR GLUING -CAN WORK ANY TYPE OF DUPLEX AND CORRUGATED CARTON -HOT GLUE SYSTEM NORDSON WITH 2 SPRAY GUNS -AVAILABLE IMMEDIATELY
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Precio: used machinery auction RESALE 1.800 €
Ubicación: Land-weight approx.: 136 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 600 mm<br/>description: pu premelter mc7-1x1vf1/x ax 3x400v 50/60hz WEIGHT APPROX.: 136 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 600 MM
DESCRIPTION: PU PREMELTER MC7-1X1VF1/X AX 3X400V 50/60HZ
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-1 of used wrap-around packer, make khs/kisters, type wp 060 v (quick change-over via servos and spindles), new 2008, operating side left. capacity upto 60 cycles/minute. siemens s7 controls with rexroth mi-technology servo drives. nordson problue 50 hot-melt unit. used to pack various glass bottles (diameters 59 - 80 mm) as 4x2, 4x6 and 3x4 loose in wrap-around cartons. 1 OF USED WRAP-AROUND PACKER, MAKE KHS/KISTERS, TYPE WP 060 V (QUICK CHANGE-OVER VIA SERVOS AND SPINDLES), NEW 2008, OPERATING SIDE LEFT. CAPACITY UPTO 60 CYCLES/MINUTE. SIEMENS S7 CONTROLS WITH REXROTH MI-TECHNOLOGY SERVO DRIVES. NORDSON PROBLUE 50 HOT-MELT UNIT. USED TO PACK VARIOUS GLASS BOTTLES (DIAMETERS 59 - 80 MM) AS 4X2, 4X6 AND 3X4 LOOSE IN WRAP-AROUND CARTONS.
Vendedor: ERMI HOLLAND B.V.
Año de construcción: usado
Precio: used machinery auction RESALE 11.400 €
Ubicación: Land-weight approx.: 3000 kg<br/>dimensions (l x w x h) approx.: 6750 x 1200 x 2100 mm<br/>description: max. panel height 60 mm, pressure with idle wheels, no. panel sizing / milling units 1 unit pre-milling unit, edge coil magazine, premelter for polyurethane glue nordson mc series, no. edge processing units 7 processing unit end trimming unit, processing unit fine trimming unit to trim and round, processing unit fine trimming unit to trim and round, processing unit corner rounding unit, processing unit edge scraping unit, processing unit glue scraping unit, processing unit buffing unit, control system power control pc 20, safety standard ce mark WEIGHT APPROX.: 3000 KG
DIMENSIONS (L X W X H) APPROX.: 6750 X 1200 X 2100 MM
DESCRIPTION: MAX. PANEL HEIGHT 60 MM, PRESSURE WITH IDLE WHEELS, NO. PANEL SIZING / MILLING UNITS 1 UNIT PRE-MILLING UNIT, EDGE COIL MAGAZINE, PREMELTER FOR POLYURETHANE GLUE NORDSON MC SERIES, NO. EDGE PROCESSING UNITS 7 PROCESSING UNIT END TRIMMING UNIT, PROCESSING UNIT FINE TRIMMING UNIT TO TRIM AND ROUND, PROCESSING UNIT FINE TRIMMING UNIT TO TRIM AND ROUND, PROCESSING UNIT CORNER ROUNDING UNIT, PROCESSING UNIT EDGE SCRAPING UNIT, PROCESSING UNIT GLUE SCRAPING UNIT, PROCESSING UNIT BUFFING UNIT, CONTROL SYSTEM POWER CONTROL PC 20, SAFETY STANDARD CE MARK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-fermentation room with lillnord air conditioner
approx. 90 x 210 x 203 cm (w x d x h)

used

fermentation room for for 2 frost er truck 60/100 cm
without soil
door hinge left
good door seal

technical data:
there is no nameplate.

fermentation room dimensions:
width: approx 90 cm
depth: approx 233 cm
usable depth: approx. 210 cm
height: approx 203 cm

through the use, there are scratches and small dents on the outer walls.
the fermentation room is stored disassembled in our cologne warehouse.
for an additional fee, we give help with rebuilding.  FERMENTATION ROOM WITH LILLNORD AIR CONDITIONER APPROX. 90 X 210 X 203 CM (W X D X H) USED FERMENTATION ROOM FOR FOR 2 FROST ER TRUCK 60/100 CM WITHOUT SOIL DOOR HINGE LEFT GOOD DOOR SEAL TECHNICAL DATA: THERE IS NO NAMEPLATE. FERMENTATION ROOM DIMENSIONS: WIDTH: APPROX 90 CM DEPTH: APPROX 233 CM USABLE DEPTH: APPROX. 210 CM HEIGHT: APPROX 203 CM THROUGH THE USE, THERE ARE SCRATCHES AND SMALL DENTS ON THE OUTER WALLS. THE FERMENTATION ROOM IS STORED DISASSEMBLED IN OUR COLOGNE WAREHOUSE. FOR AN ADDITIONAL FEE, WE GIVE HELP WITH REBUILDING.
Vendedor: AY-BACK Technik Bäckerei & Gastronomiemaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 33.000 €
Ubicación: Land-weight approx.: 5800 kg<br/>dimensions (l x w x h) approx.: 8750 x 1300 x 1900 mm<br/>description: max. panel height 60 mm, pressure with rubber belt, panel support guides with positioning by nc, no. panel sizing / milling units 1 unit pre-milling unit, edge coil magazine no. positions 24, premelter for polyurethane glue nordson mc series, no. edge processing units 6 processing unit end trimming unit, processing unit top and bottom rough trimming unit, processing unit corner rounding unit, constructor model fk 13 automatic tool change, processing unit edge scraping unit, processing unit glue scraping unit, processing unit buffing unit, control system power control pc 22, safety standard ce mark WEIGHT APPROX.: 5800 KG
DIMENSIONS (L X W X H) APPROX.: 8750 X 1300 X 1900 MM
DESCRIPTION: MAX. PANEL HEIGHT 60 MM, PRESSURE WITH RUBBER BELT, PANEL SUPPORT GUIDES WITH POSITIONING BY NC, NO. PANEL SIZING / MILLING UNITS 1 UNIT PRE-MILLING UNIT, EDGE COIL MAGAZINE NO. POSITIONS 24, PREMELTER FOR POLYURETHANE GLUE NORDSON MC SERIES, NO. EDGE PROCESSING UNITS 6 PROCESSING UNIT END TRIMMING UNIT, PROCESSING UNIT TOP AND BOTTOM ROUGH TRIMMING UNIT, PROCESSING UNIT CORNER ROUNDING UNIT, CONSTRUCTOR MODEL FK 13 AUTOMATIC TOOL CHANGE, PROCESSING UNIT EDGE SCRAPING UNIT, PROCESSING UNIT GLUE SCRAPING UNIT, PROCESSING UNIT BUFFING UNIT, CONTROL SYSTEM POWER CONTROL PC 22, SAFETY STANDARD CE MARK
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 250 €
Ubicación: Land-thermo glass door refrigerator nordcap in good condition.
volume: 109liter, refrigerant: r600a / 35 g.
suitable for 10 x bleche(400x300mm) the door is adjustable, you can switch to it as it wishes, open either to the right or to the left! ser. no.: rwh908
dimensions: 500x550x830mm, size: 400x300mm
elek. voltage: 220-240v elek. power: 90w. THERMO GLASS DOOR REFRIGERATOR NORDCAP IN GOOD CONDITION. VOLUME: 109LITER, REFRIGERANT: R600A / 35 G. SUITABLE FOR 10 X BLECHE(400X300MM) THE DOOR IS ADJUSTABLE, YOU CAN SWITCH TO IT AS IT WISHES, OPEN EITHER TO THE RIGHT OR TO THE LEFT! SER. NO.: RWH908 DIMENSIONS: 500X550X830MM, SIZE: 400X300MM ELEK. VOLTAGE: 220-240V ELEK. POWER: 90W.
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-butter churn / butter pavers made of stainless steel

type ehkow 300

100 ltr. capacity

BUTTER CHURN / BUTTER PAVERS MADE OF STAINLESS STEEL TYPE EHKOW 300 100 LTR. CAPACITY
Vendedor: Die fliegende Käserei
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 990 €
Ubicación: Land-drive station, gear motor, nord drivesystems, slow drive
manufacturer: getriebebau nord - nord drivesystems
type: motor nord sk90l / 4 bre20 + gearbox nord se194 02 + inverter nord vector sk3000 / 3ct

motor and gearboxes are mounted in a cabinet made of solid aluminum profiles. the middle of the power output is at an altitude of 1200mm. with a mobile wave, the moderate amount of power loss can still be varied. an inverter is installed in a mounted control cabinet to control the drive unit.

technical specifications:
motor nord sk90l / 4 bre20
230 / 400v, 1.5 kw, 1385 rpm, ip54

flat gearbox north se194 02
i = 64.12, leaving speed 22 rpm,

inverter nord vector sk3000 / 3ct
for controlling the drive unit

width 600mm, depth 830mm, height 1500mm

the drive station was used for a wrapping station of cloth bales and is fully functional.  DRIVE STATION, GEAR MOTOR, NORD DRIVESYSTEMS, SLOW DRIVE MANUFACTURER: GETRIEBEBAU NORD - NORD DRIVESYSTEMS TYPE: MOTOR NORD SK90L / 4 BRE20 + GEARBOX NORD SE194 02 + INVERTER NORD VECTOR SK3000 / 3CT MOTOR AND GEARBOXES ARE MOUNTED IN A CABINET MADE OF SOLID ALUMINUM PROFILES. THE MIDDLE OF THE POWER OUTPUT IS AT AN ALTITUDE OF 1200MM. WITH A MOBILE WAVE, THE MODERATE AMOUNT OF POWER LOSS CAN STILL BE VARIED. AN INVERTER IS INSTALLED IN A MOUNTED CONTROL CABINET TO CONTROL THE DRIVE UNIT. TECHNICAL SPECIFICATIONS: MOTOR NORD SK90L / 4 BRE20 230 / 400V, 1.5 KW, 1385 RPM, IP54 FLAT GEARBOX NORTH SE194 02 I = 64.12, LEAVING SPEED 22 RPM, INVERTER NORD VECTOR SK3000 / 3CT FOR CONTROLLING THE DRIVE UNIT WIDTH 600MM, DEPTH 830MM, HEIGHT 1500MM THE DRIVE STATION WAS USED FOR A WRAPPING STATION OF CLOTH BALES AND IS FULLY FUNCTIONAL.
Vendedor: IPV GmbH
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 49.000 €
Ubicación: Land-d 105
1 ammann ultra clean cup filling machine
for 75 mm cups and for 2 cups in one cup
with amman cup packaging machine
with ammann carton manufacturing machine
with empry caron deliver plant
with electronic cabinet
manufacturer year is 2000
capacity 7.200 cup per hour
constructed as a long round cup filling machine
length of the machine with cup packaging machine 
is 14,9 m, breadth 2,35 m
high included filling station pipe connection and 
cup magazine: 3,65 m

looking from the cup outlet against the running direction 
are installed:
  - 1 pivoting control panel
  - one 4 time cup magazine, high of the magazine 
    is 2,30 m, to bring in the cup packs
    in the magazine are available a ladder with a small stage, 
    high of the stage is 1,20 m

  - one cup sterilisation station, length 3 stroke x 4 cups
    with h2o2 sucking device out of the sterile tunnel.
  - one ”byside” cup filling station for ceralien or 
    small chocolate bowls, transportable to set this filler 
    in the free place of the ammann filling machine
or alternative
-  one “byside” cup filling station for liquid products. 
   a dosing filler with 4 filling heads
    after this station will follow a 180° turn of the chain to the
  - one  main cup filling station for liquid products. a dosing filler 
    with 4 filling heads
  - one 4 times lid magazine station with lid sterilisation with 
    electric energy
  - one 4 times lid sealing station
  - one lid pressing station
  - one cup lifting area, placed short before the chain turn to 180°, 
    on the outlet cup conveyor
  - two equal labelling machine, what are installed on both side 
    of the outlet transport conveyor
  - one ammann cup packaging machine into an open carton
    manufacturer year: 2000
    0ne outlet carton transport conveyor, length 1,5 m  
 
  - one ammann carton producing machine, type sh 6
    machine nro: 1174, manufacturer year is 2000
    with nordson glue technology, outlet carton conveyor 1 m
  - with a sema carton lift machine
  - with e empty carton transport conveyor is complete  
    installed taken down from the ceiling, existing about:
    7 m straightly carton transport conveyor
    2 x 90° curves
    1 carton slide to the high of the inlet of the ammann 
     packaging machine
    the empty carton running transverse into the packaging 
    machine
    the measurement of a tray is: lxbxh: 23,3 cm x 39,5 cm, 
    high 4,6 cm, place for 10 x 120 g cups.

-  1 electronic cabinet standing on feet
    with cable connection to the filling machine
    space between cabinet and filling machine is 1,30 m
    with 3 doors and with a operation panel.
    with siemens s 5 installation
    length: 2,35 m, breadth 55 cm
-  1 cip collecting reservoir, rectangular construction
 with nieveau control
 with pipe sive and cip centrifugal pump. 
price up standing point:			 49.000,00 euro





          D 105 1 AMMANN ULTRA CLEAN CUP FILLING MACHINE FOR 75 MM CUPS AND FOR 2 CUPS IN ONE CUP WITH AMMAN CUP PACKAGING MACHINE WITH AMMANN CARTON MANUFACTURING MACHINE WITH EMPRY CARON DELIVER PLANT WITH ELECTRONIC CABINET MANUFACTURER YEAR IS 2000 CAPACITY 7.200 CUP PER HOUR CONSTRUCTED AS A LONG ROUND CUP FILLING MACHINE LENGTH OF THE MACHINE WITH CUP PACKAGING MACHINE IS 14,9 M, BREADTH 2,35 M HIGH INCLUDED FILLING STATION PIPE CONNECTION AND CUP MAGAZINE: 3,65 M LOOKING FROM THE CUP OUTLET AGAINST THE RUNNING DIRECTION ARE INSTALLED: - 1 PIVOTING CONTROL PANEL - ONE 4 TIME CUP MAGAZINE, HIGH OF THE MAGAZINE IS 2,30 M, TO BRING IN THE CUP PACKS IN THE MAGAZINE ARE AVAILABLE A LADDER WITH A SMALL STAGE, HIGH OF THE STAGE IS 1,20 M - ONE CUP STERILISATION STATION, LENGTH 3 STROKE X 4 CUPS WITH H2O2 SUCKING DEVICE OUT OF THE STERILE TUNNEL. - ONE ”BYSIDE” CUP FILLING STATION FOR CERALIEN OR SMALL CHOCOLATE BOWLS, TRANSPORTABLE TO SET THIS FILLER IN THE FREE PLACE OF THE AMMANN FILLING MACHINE OR ALTERNATIVE - ONE “BYSIDE” CUP FILLING STATION FOR LIQUID PRODUCTS. A DOSING FILLER WITH 4 FILLING HEADS AFTER THIS STATION WILL FOLLOW A 180° TURN OF THE CHAIN TO THE - ONE MAIN CUP FILLING STATION FOR LIQUID PRODUCTS. A DOSING FILLER WITH 4 FILLING HEADS - ONE 4 TIMES LID MAGAZINE STATION WITH LID STERILISATION WITH ELECTRIC ENERGY - ONE 4 TIMES LID SEALING STATION - ONE LID PRESSING STATION - ONE CUP LIFTING AREA, PLACED SHORT BEFORE THE CHAIN TURN TO 180°, ON THE OUTLET CUP CONVEYOR - TWO EQUAL LABELLING MACHINE, WHAT ARE INSTALLED ON BOTH SIDE OF THE OUTLET TRANSPORT CONVEYOR - ONE AMMANN CUP PACKAGING MACHINE INTO AN OPEN CARTON MANUFACTURER YEAR: 2000 0NE OUTLET CARTON TRANSPORT CONVEYOR, LENGTH 1,5 M - ONE AMMANN CARTON PRODUCING MACHINE, TYPE SH 6 MACHINE NRO: 1174, MANUFACTURER YEAR IS 2000 WITH NORDSON GLUE TECHNOLOGY, OUTLET CARTON CONVEYOR 1 M - WITH A SEMA CARTON LIFT MACHINE - WITH E EMPTY CARTON TRANSPORT CONVEYOR IS COMPLETE INSTALLED TAKEN DOWN FROM THE CEILING, EXISTING ABOUT: 7 M STRAIGHTLY CARTON TRANSPORT CONVEYOR 2 X 90° CURVES 1 CARTON SLIDE TO THE HIGH OF THE INLET OF THE AMMANN PACKAGING MACHINE THE EMPTY CARTON RUNNING TRANSVERSE INTO THE PACKAGING MACHINE THE MEASUREMENT OF A TRAY IS: LXBXH: 23,3 CM X 39,5 CM, HIGH 4,6 CM, PLACE FOR 10 X 120 G CUPS. - 1 ELECTRONIC CABINET STANDING ON FEET WITH CABLE CONNECTION TO THE FILLING MACHINE SPACE BETWEEN CABINET AND FILLING MACHINE IS 1,30 M WITH 3 DOORS AND WITH A OPERATION PANEL. WITH SIEMENS S 5 INSTALLATION LENGTH: 2,35 M, BREADTH 55 CM - 1 CIP COLLECTING RESERVOIR, RECTANGULAR CONSTRUCTION WITH NIEVEAU CONTROL WITH PIPE SIVE AND CIP CENTRIFUGAL PUMP. PRICE UP STANDING POINT: 49.000,00 EURO
Vendedor: LM Dairy Consulting
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-complete dairy dairy plant

plant is in the europe

most equipments is unsued, same use it few monhts.

manufacture of year : 2017 to 2011
no.1 cip-line
no.2 milk reception line
n0. 3 pasteurization line
n0. 4 brine (salamura) line
no. 5 yogurt line
no. 6 cheese line
no. 7 mozzarella line
no. 8 fat whey line  (riccota line)
no. 9 packaging line- for finished products
no. 10 steam line
no. 11 ice water line 
no. 12 air line
no. 13 fermentation chamber -system
no. 14 other equipment- -currently out of use or not install.
-polivent cheese vats capacity 3000 lit whit pre presse
and automatic process control
- modular fresh water tank(aisi 304) capacit 12000 lit new equipment 
-tank capacity 3500 lit whit agitator-nord 1,5 kw  - 
-tunnel  for washing plastik molds -1 pieces 
-cutters for small cheese cubes new equipment 
- pump for fresh water apw +55/35  5,5 kw new equipment 
-- heat exchanger (cooler) apw phe-h rk-17 6/1 (aisi 316 -5000 l/h milk—8000 l/h ice water) new equipment-2017 
-- heat exchanger (cooler) apw phe-t4 rgs-16/1(2200 l/h ( various media for example brine 2200 l/h –4000 l/h ice water) approximately 7/8hour from 36¨c—4¨ c- new equipment-2017 year


ask it for more details and video / wetransfer

rgds
atilla
   COMPLETE DAIRY DAIRY PLANT PLANT IS IN THE EUROPE MOST EQUIPMENTS IS UNSUED, SAME USE IT FEW MONHTS. MANUFACTURE OF YEAR : 2017 TO 2011 NO.1 CIP-LINE NO.2 MILK RECEPTION LINE N0. 3 PASTEURIZATION LINE N0. 4 BRINE (SALAMURA) LINE NO. 5 YOGURT LINE NO. 6 CHEESE LINE NO. 7 MOZZARELLA LINE NO. 8 FAT WHEY LINE (RICCOTA LINE) NO. 9 PACKAGING LINE- FOR FINISHED PRODUCTS NO. 10 STEAM LINE NO. 11 ICE WATER LINE NO. 12 AIR LINE NO. 13 FERMENTATION CHAMBER -SYSTEM NO. 14 OTHER EQUIPMENT- -CURRENTLY OUT OF USE OR NOT INSTALL. -POLIVENT CHEESE VATS CAPACITY 3000 LIT WHIT PRE PRESSE AND AUTOMATIC PROCESS CONTROL - MODULAR FRESH WATER TANK(AISI 304) CAPACIT 12000 LIT NEW EQUIPMENT -TANK CAPACITY 3500 LIT WHIT AGITATOR-NORD 1,5 KW - -TUNNEL FOR WASHING PLASTIK MOLDS -1 PIECES -CUTTERS FOR SMALL CHEESE CUBES NEW EQUIPMENT - PUMP FOR FRESH WATER APW +55/35 5,5 KW NEW EQUIPMENT -- HEAT EXCHANGER (COOLER) APW PHE-H RK-17 6/1 (AISI 316 -5000 L/H MILK—8000 L/H ICE WATER) NEW EQUIPMENT-2017 -- HEAT EXCHANGER (COOLER) APW PHE-T4 RGS-16/1(2200 L/H ( VARIOUS MEDIA FOR EXAMPLE BRINE 2200 L/H –4000 L/H ICE WATER) APPROXIMATELY 7/8HOUR FROM 36¨C—4¨ C- NEW EQUIPMENT-2017 YEAR ASK IT FOR MORE DETAILS AND VIDEO / WETRANSFER RGDS ATILLA PLANTA LECHERA LECHERA COMPLETA Mayoría de los equipos es desuso, mismo utilizarlo sacar algunos. Fabricación del año: 2017-2011 LÍNEA DE CIP N º 1 LÍNEA DE RECEPCIÓN DE LECHE NO.2 N0. LÍNEA DE PASTEURIZACIÓN 3 N0. LÍNEA DE LA SALMUERA 4 (SALAMURA) LÍNEA DE YOGUR Nº 5 LÍNEA DE QUESO Nº 6 LÍNEA DE MOZZARELLA Nº 7 NO. 8 SUERO GRASA (LÍNEA DE RICCOTA) NO. 9 EMPAQUE LÍNEA-PARA PRODUCTOS TERMINADOS NO. 10 TUBERÍA DE VAPOR NO. 11 HIELO AGUA LÍNEA AIRE DE Nº 12 NO. 13 FERMENTACIÓN CÁMARA - SISTEMA No. 14 otro equipo lo pregunte para más detalles y Video / WeTransfer Rgds
Vendedor: Ozbek Machinery Trade

Líneas de producción more

Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 80.000 €
Ubicación: Land-used fully automatic tube filling and cartoning line for capacities up to 200 pe - or laminate tubes including accessories and numerous format sets  USED FULLY AUTOMATIC TUBE FILLING AND CARTONING LINE FOR CAPACITIES UP TO 200 PE - OR LAMINATE TUBES INCLUDING ACCESSORIES AND NUMEROUS FORMAT SETS
Vendedor: CBV - Chistoph Binder Verpackungsmaschinen
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-complete packing line for liquid/gel products in sticks, comprising merz spm-50 5-lane stick pack machine with 5 peristaltic pumps, dosing range 0.5ml to 100ml. currently set for 24mm wide sticks, length variable 40 - 180mm, fill volume 2 - 15 ml. with additional format parts, the stick width can be between 17 to 35mm wide, fitted with gas flushing, siemens s7-300 plc, and multi-lane hot foil printer (print area 55 x 40mm per head). ocs checkweigher with reject device, automatic transfer with 3 camera controlled pick and place robots into a brunner vcl-180s vertical cartoner. carton size range min. 20 x 20 x 60 mm (axbxh), max. 150 x 100 x 200 mm (axbxh). the number of sticks in the carton adjustable from 1 to 40 sticks. fitted with guk fa21/4 sva/21 cartonac 91 leaflet folder for flat sheet leaflets, with argus 6012 code reader and missing leaflet in carton detection. cartoner suitable for tuck closure as well as glue closure using a nordson hot glue system, and fitted with a wolke m600 ink jet printer for variable data/datamatrix codes on the base of the carton. output up to 300 sticks per minute and 60 cartons per minute. year 2010. first class condition, little used. COMPLETE PACKING LINE FOR LIQUID/GEL PRODUCTS IN STICKS, COMPRISING MERZ SPM-50 5-LANE STICK PACK MACHINE WITH 5 PERISTALTIC PUMPS, DOSING RANGE 0.5ML TO 100ML. CURRENTLY SET FOR 24MM WIDE STICKS, LENGTH VARIABLE 40 - 180MM, FILL VOLUME 2 - 15 ML. WITH ADDITIONAL FORMAT PARTS, THE STICK WIDTH CAN BE BETWEEN 17 TO 35MM WIDE, FITTED WITH GAS FLUSHING, SIEMENS S7-300 PLC, AND MULTI-LANE HOT FOIL PRINTER (PRINT AREA 55 X 40MM PER HEAD). OCS CHECKWEIGHER WITH REJECT DEVICE, AUTOMATIC TRANSFER WITH 3 CAMERA CONTROLLED PICK AND PLACE ROBOTS INTO A BRUNNER VCL-180S VERTICAL CARTONER. CARTON SIZE RANGE MIN. 20 X 20 X 60 MM (AXBXH), MAX. 150 X 100 X 200 MM (AXBXH). THE NUMBER OF STICKS IN THE CARTON ADJUSTABLE FROM 1 TO 40 STICKS. FITTED WITH GUK FA21/4 SVA/21 CARTONAC 91 LEAFLET FOLDER FOR FLAT SHEET LEAFLETS, WITH ARGUS 6012 CODE READER AND MISSING LEAFLET IN CARTON DETECTION. CARTONER SUITABLE FOR TUCK CLOSURE AS WELL AS GLUE CLOSURE USING A NORDSON HOT GLUE SYSTEM, AND FITTED WITH A WOLKE M600 INK JET PRINTER FOR VARIABLE DATA/DATAMATRIX CODES ON THE BASE OF THE CARTON. OUTPUT UP TO 300 STICKS PER MINUTE AND 60 CARTONS PER MINUTE. YEAR 2010. FIRST CLASS CONDITION, LITTLE USED.
Vendedor: Hauser Maschinen e.K.
Año de construcción: usado
Ubicación: Land-24.000 bottles / h
nordson hot glue device
- optionally reconditioned - 24.000 BOTTLES / H NORDSON HOT GLUE DEVICE - OPTIONALLY RECONDITIONED -
Vendedor: Ohrter Getränkemaschinen Handel
Año de construcción: usado
Precio: 25.000 GBP
Ubicación: Land-automatic intermittent motion horizontal cartoning machine. product infeed chain designed to be connected to various available automatic feeding units. simultaneous adjustment of all infeed buckets (related to product width). simplified magazine guide and pickup adjustment. 800mm carton magazine with pusher belt, adjustable for different sizes with minimum load control, programmable for different pack sizes. carton transport system centrally adjustable and equipped with digitahttps://www.resale.de/add.php?lang=en&gruppe=404&other=1&hersteller=&modell=&typd=&type=&beschreibung=&sellerid=&film=&standorttld=&standort=&auktion=0&order=1&l indicators. widening of the belt transport system performed with hand wheel and digital indicators to suit carton length. easy changeover, compact and reliable design. minimum and maximum carton sizes: length 80mm to 200mm, width 40mm to 165mm, height 20mm to 100mm. flight pitch 150mm. siemens simatic hmi and plc. vacuum pick and place carton feeder. argus laetus barcode reader. nordson pro blue 4 twin head hot melt closing unit. machine size: 3595mm x 1752mm x approx. 2000mm high, approx. weight 2000kg. recently taken out of production. excellent condition AUTOMATIC INTERMITTENT MOTION HORIZONTAL CARTONING MACHINE. PRODUCT INFEED CHAIN DESIGNED TO BE CONNECTED TO VARIOUS AVAILABLE AUTOMATIC FEEDING UNITS. SIMULTANEOUS ADJUSTMENT OF ALL INFEED BUCKETS (RELATED TO PRODUCT WIDTH). SIMPLIFIED MAGAZINE GUIDE AND PICKUP ADJUSTMENT. 800MM CARTON MAGAZINE WITH PUSHER BELT, ADJUSTABLE FOR DIFFERENT SIZES WITH MINIMUM LOAD CONTROL, PROGRAMMABLE FOR DIFFERENT PACK SIZES. CARTON TRANSPORT SYSTEM CENTRALLY ADJUSTABLE AND EQUIPPED WITH DIGITAHTTPS://WWW.RESALE.DE/ADD.PHP?LANG=EN&GRUPPE=404&OTHER=1&HERSTELLER=&MODELL=&TYPD=&TYPE=&BESCHREIBUNG=&SELLERID=&FILM=&STANDORTTLD=&STANDORT=&AUKTION=0&ORDER=1&L INDICATORS. WIDENING OF THE BELT TRANSPORT SYSTEM PERFORMED WITH HAND WHEEL AND DIGITAL INDICATORS TO SUIT CARTON LENGTH. EASY CHANGEOVER, COMPACT AND RELIABLE DESIGN. MINIMUM AND MAXIMUM CARTON SIZES: LENGTH 80MM TO 200MM, WIDTH 40MM TO 165MM, HEIGHT 20MM TO 100MM. FLIGHT PITCH 150MM. SIEMENS SIMATIC HMI AND PLC. VACUUM PICK AND PLACE CARTON FEEDER. ARGUS LAETUS BARCODE READER. NORDSON PRO BLUE 4 TWIN HEAD HOT MELT CLOSING UNIT. MACHINE SIZE: 3595MM X 1752MM X APPROX. 2000MM HIGH, APPROX. WEIGHT 2000KG. RECENTLY TAKEN OUT OF PRODUCTION. EXCELLENT CONDITION
Vendedor: Lex Machinery Ltd
Año de construcción: usado
Ubicación: Land-24.000 bottles / h
nordson hot glue device
- optionally reconditioned - 24.000 BOTTLES / H NORDSON HOT GLUE DEVICE - OPTIONALLY RECONDITIONED -
Vendedor: Ohrter Getränkemaschinen Handel
Año de construcción: usado
Ubicación: Land-powder coating plant: accustrip, nordson, weishaupt, stainless steel pretreatment tunnel

year of manufacture: 2007
technical condition: very good

powder coating plant with opening: h=1800mm x w=1000mm x max product length l=5000mm

pre-treatment plant made of stainless steel aisi 316: 3 zones
drying oven 250kw heated by gas
cure oven 250kw heated by gas
weishaupt burner
chain conveyors

powder booth made of steel and aluminium equipped with nordson tribomatic incl. 10 powder pistols (5 right + 5 left)
each gun equipped with 8 spray nozzles, so powder is applied with 40 spray nozzles on each side
cyclone, filter

available in february 2019.
plant must be dismantled and picked up by the buyer. POWDER COATING PLANT: ACCUSTRIP, NORDSON, WEISHAUPT, STAINLESS STEEL PRETREATMENT TUNNEL YEAR OF MANUFACTURE: 2007 TECHNICAL CONDITION: VERY GOOD POWDER COATING PLANT WITH OPENING: H=1800MM X W=1000MM X MAX PRODUCT LENGTH L=5000MM PRE-TREATMENT PLANT MADE OF STAINLESS STEEL AISI 316: 3 ZONES DRYING OVEN 250KW HEATED BY GAS CURE OVEN 250KW HEATED BY GAS WEISHAUPT BURNER CHAIN CONVEYORS POWDER BOOTH MADE OF STEEL AND ALUMINIUM EQUIPPED WITH NORDSON TRIBOMATIC INCL. 10 POWDER PISTOLS (5 RIGHT + 5 LEFT) EACH GUN EQUIPPED WITH 8 SPRAY NOZZLES, SO POWDER IS APPLIED WITH 40 SPRAY NOZZLES ON EACH SIDE CYCLONE, FILTER AVAILABLE IN FEBRUARY 2019. PLANT MUST BE DISMANTLED AND PICKED UP BY THE BUYER.
Vendedor: TDMW.PL Igor Kaliniec
Año de construcción: usado
Ubicación: Land-42t impactor 1320x900 mm, 6 m3 bunker with prescreening and side conveyor, magnet, long endconveyor, radio control, very nice and clean condition.; power [ps]: 415; gross weight [kg]: 42000; engine: cat c 13 42T IMPACTOR 1320X900 MM, 6 M3 BUNKER WITH PRESCREENING AND SIDE CONVEYOR, MAGNET, LONG ENDCONVEYOR, RADIO CONTROL, VERY NICE AND CLEAN CONDITION.; POWER [PS]: 415; GROSS WEIGHT [KG]: 42000; ENGINE: CAT C 13
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-khs innopal pb 2 palletizing line 450 p/h with pallet wrapper and marking 
  
complete palletizing line with packed infeed conveyor, packed marking system, double palletizing system, pallet conveyors and pallet magazine, pallet stretch wrapper and pallet marking. line capacity is 450 pallet / hours and it is used for shrink wrapped glass bottles but it is sutable for various type of packages. it palletizes packs of different sizes and properties extremely gently and processes different pallet types. this line is installed and powered today. 
 
the following main equipment is included to this line
•	delivery pack conveyor system 10 meters 
•	palletizer khs innopal pb 2 bn h, year 2004, double system with pallet magazine 
•	control panel with siemens s 7 plc system 
•	pallet stretch wrapping machine robopac genesis  with siemens s7-300 plc 
•	pallet conveyor system sasib
 
 
optional equipment: 
•	printer applicator metec tb 102, year 2013 for distribution packages
•	nordson hot glue system for delivery package top anti-skidding purpose
•	pallet label applicator and roller conveyor turning device  
 
   KHS INNOPAL PB 2 PALLETIZING LINE 450 P/H WITH PALLET WRAPPER AND MARKING COMPLETE PALLETIZING LINE WITH PACKED INFEED CONVEYOR, PACKED MARKING SYSTEM, DOUBLE PALLETIZING SYSTEM, PALLET CONVEYORS AND PALLET MAGAZINE, PALLET STRETCH WRAPPER AND PALLET MARKING. LINE CAPACITY IS 450 PALLET / HOURS AND IT IS USED FOR SHRINK WRAPPED GLASS BOTTLES BUT IT IS SUTABLE FOR VARIOUS TYPE OF PACKAGES. IT PALLETIZES PACKS OF DIFFERENT SIZES AND PROPERTIES EXTREMELY GENTLY AND PROCESSES DIFFERENT PALLET TYPES. THIS LINE IS INSTALLED AND POWERED TODAY. THE FOLLOWING MAIN EQUIPMENT IS INCLUDED TO THIS LINE • DELIVERY PACK CONVEYOR SYSTEM 10 METERS • PALLETIZER KHS INNOPAL PB 2 BN H, YEAR 2004, DOUBLE SYSTEM WITH PALLET MAGAZINE • CONTROL PANEL WITH SIEMENS S 7 PLC SYSTEM • PALLET STRETCH WRAPPING MACHINE ROBOPAC GENESIS WITH SIEMENS S7-300 PLC • PALLET CONVEYOR SYSTEM SASIB OPTIONAL EQUIPMENT: • PRINTER APPLICATOR METEC TB 102, YEAR 2013 FOR DISTRIBUTION PACKAGES • NORDSON HOT GLUE SYSTEM FOR DELIVERY PACKAGE TOP ANTI-SKIDDING PURPOSE • PALLET LABEL APPLICATOR AND ROLLER CONVEYOR TURNING DEVICE
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-30t, 930 x580 single toggle with asc system, sidebelt, magnetbelt, long endconveyor; power [ps]: 228; gross weight [kg]: 30000; engine: cat c7.1, tier 4 30T, 930 X580 SINGLE TOGGLE WITH ASC SYSTEM, SIDEBELT, MAGNETBELT, LONG ENDCONVEYOR; POWER [PS]: 228; GROSS WEIGHT [KG]: 30000; ENGINE: CAT C7.1, TIER 4
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Precio: 9.000 €
Ubicación: Land-miwe oil oven recently overhauled. 10 m² 5 cookers, oven is screwed, can be disassembled. 
loading cars with 10 extractors stainless steel.
with a fermentation room and fermentation room heating (manufactor lillnord)   MIWE OIL OVEN RECENTLY OVERHAULED. 10 M² 5 COOKERS, OVEN IS SCREWED, CAN BE DISASSEMBLED. LOADING CARS WITH 10 EXTRACTORS STAINLESS STEEL. WITH A FERMENTATION ROOM AND FERMENTATION ROOM HEATING (MANUFACTOR LILLNORD)
Vendedor: Jürgen Wienholz Bäckereimaschinen
Año de construcción: usado
Ubicación: Land-equipped with nordson-gluer.<br/>glue: hot glue <br/>bottle format: 0,75 l. <br/>carton format: <br/>292 mm x 198 mm x 342 mm or <br/>248 mm x 188 mm x 340 mm. <br/>id5535 EQUIPPED WITH NORDSON-GLUER.
GLUE: HOT GLUE
BOTTLE FORMAT: 0,75 L.
CARTON FORMAT:
292 MM X 198 MM X 342 MM OR
248 MM X 188 MM X 340 MM.
ID5535
Vendedor: Seegräber GmbH
Año de construcción: usado
Precio: 680 €
Ubicación: Land-gear motor, 50 hz / 60 hz 220-240 / 380-420 v GEAR MOTOR, 50 HZ / 60 HZ 220-240 / 380-420 V
Vendedor: Wensauer-Edelstahl-Vertrieb-UG
Año de construcción: usado
Precio: 13.900 €
Ubicación: Land-cnc processing centre\r\nbrand: weeke\r\ntype: optimat bhc 350\r\nyear: 2003\r\n\r\nwith laser for the positioning of the vacuum suction cups\r\n\r\ntechnical data:\r\n\r\nunits:\r\nverticale drilling unit, 12 spindles via program single selectable\r\nrotation speed: 1.500 - 5.000 1/min, frequency controlled\r\ndrive: 1,5 kw\r\norder: 6 spindles x-direction (row of holes)\r\n5 spindles y-direction (construction)\r\n1 spindle in reinforced version, resilient up to 35 mm\r\n\r\nhorizontal drilling unit, 4 spindles, in x-direction\r\nrotation speed: 1.500 - 5.000 1/min, frequency controlled\r\n\r\nhorizontal drilling unit, 2 spindles, in y-direction\r\nrotation speed: 1.500 - 5.000 1/min, frequency controlled\r\n\r\ngroove saw in x-direction\r\ngroove saw unit in x-direction ordered\r\nrotation speed: 2.000 - 6.500 1/min, frequency controlled\r\ntool Ø: 100 mm\r\nsaw blade thickness: max. 5 mm\r\n\r\n2 top millers 6 kw mit hydro quick clamping system\r\nrotation speed: stepless 6.000-18.000 1/min\r\nprogrammable\r\ndrive: frequency controlled three-phase motor\r\ntool: up to 5/6 kw in continous operation/intermittent duty (s1/s6-50%)\r\n\r\nsupport table:\r\nlength: 3750mm\r\nwidth: 1220mm\r\nworkpiece thickness: 50mm\r\nwith 100 m3/h power.\r\n\r\nmoving route:\r\nx-axis: 4310mm\r\ny-axis: 1675mm\r\nz-axis: 135mm\r\n\r\nspeed:\r\nx-axis: 60m/min\r\ny-axis: 50m/min\r\nz-axis: 20m/min\r\n\r\npneumatic:\r\nr 1/2\r\ncompressed air consumption: approx. 100-200 l/min\r\n\r\nsuction: \r\nstud: 1200 height approx. 2010\r\ntotal suction power: min. 3170 m³/h\r\nair speed: min. 28 m/sec\r\n\r\nelectronic: ip 53\r\nwoodwop 4.5\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding.\r\n CNC PROCESSING CENTRE\R\NBRAND: WEEKE\R\NTYPE: OPTIMAT BHC 350\R\NYEAR: 2003\R\N\R\NWITH LASER FOR THE POSITIONING OF THE VACUUM SUCTION CUPS\R\N\R\NTECHNICAL DATA:\R\N\R\NUNITS:\R\NVERTICALE DRILLING UNIT, 12 SPINDLES VIA PROGRAM SINGLE SELECTABLE\R\NROTATION SPEED: 1.500 - 5.000 1/MIN, FREQUENCY CONTROLLED\R\NDRIVE: 1,5 KW\R\NORDER: 6 SPINDLES X-DIRECTION (ROW OF HOLES)\R\N5 SPINDLES Y-DIRECTION (CONSTRUCTION)\R\N1 SPINDLE IN REINFORCED VERSION, RESILIENT UP TO 35 MM\R\N\R\NHORIZONTAL DRILLING UNIT, 4 SPINDLES, IN X-DIRECTION\R\NROTATION SPEED: 1.500 - 5.000 1/MIN, FREQUENCY CONTROLLED\R\N\R\NHORIZONTAL DRILLING UNIT, 2 SPINDLES, IN Y-DIRECTION\R\NROTATION SPEED: 1.500 - 5.000 1/MIN, FREQUENCY CONTROLLED\R\N\R\NGROOVE SAW IN X-DIRECTION\R\NGROOVE SAW UNIT IN X-DIRECTION ORDERED\R\NROTATION SPEED: 2.000 - 6.500 1/MIN, FREQUENCY CONTROLLED\R\NTOOL Ø: 100 MM\R\NSAW BLADE THICKNESS: MAX. 5 MM\R\N\R\N2 TOP MILLERS 6 KW MIT HYDRO QUICK CLAMPING SYSTEM\R\NROTATION SPEED: STEPLESS 6.000-18.000 1/MIN\R\NPROGRAMMABLE\R\NDRIVE: FREQUENCY CONTROLLED THREE-PHASE MOTOR\R\NTOOL: UP TO 5/6 KW IN CONTINOUS OPERATION/INTERMITTENT DUTY (S1/S6-50%)\R\N\R\NSUPPORT TABLE:\R\NLENGTH: 3750MM\R\NWIDTH: 1220MM\R\NWORKPIECE THICKNESS: 50MM\R\NWITH 100 M3/H POWER.\R\N\R\NMOVING ROUTE:\R\NX-AXIS: 4310MM\R\NY-AXIS: 1675MM\R\NZ-AXIS: 135MM\R\N\R\NSPEED:\R\NX-AXIS: 60M/MIN\R\NY-AXIS: 50M/MIN\R\NZ-AXIS: 20M/MIN\R\N\R\NPNEUMATIC:\R\NR 1/2\R\NCOMPRESSED AIR CONSUMPTION: APPROX. 100-200 L/MIN\R\N\R\NSUCTION: \R\NSTUD: 1200 HEIGHT APPROX. 2010\R\NTOTAL SUCTION POWER: MIN. 3170 M³/H\R\NAIR SPEED: MIN. 28 M/SEC\R\N\R\NELECTRONIC: IP 53\R\NWOODWOP 4.5\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 470 €
Ubicación: Land-â?¢type of strap: nsl-10elbv
â?¢ manufacturer: budde
â?¢ length: 2000mm
â?¢ belt width: 400 mm
â?¢ overall width: 525 mm
â?¢ g / s 38,20 m / min.

â?¢ engine data: getriebebau nord type sk0205daz8d-sai-16,86/h1 83 =
â?¢ color: blue
â?¢ weight: approx. 100 kg
 &ACIRC;?&CENT;TYPE OF STRAP: NSL-10ELBV &ACIRC;?&CENT; MANUFACTURER: BUDDE &ACIRC;?&CENT; LENGTH: 2000MM &ACIRC;?&CENT; BELT WIDTH: 400 MM &ACIRC;?&CENT; OVERALL WIDTH: 525 MM &ACIRC;?&CENT; G / S 38,20 M / MIN. &ACIRC;?&CENT; ENGINE DATA: GETRIEBEBAU NORD TYPE SK0205DAZ8D-SAI-16,86/H1 83 = &ACIRC;?&CENT; COLOR: BLUE &ACIRC;?&CENT; WEIGHT: APPROX. 100 KG
Vendedor: DLK GmbH
Año de construcción: usado
Precio: 680 €
Ubicación: Land-dc, geared motor <br /><br /> -6.8 kw <br /> dc motor manufacturer baumuller type dsg 71-m <br /> gearbox manufacturer nord type 32-2az-iec 90 <br /> translation 1: 25,88 <br /> hollow shaft diameter 40 mm <br /> -4000 rpm / 155 rpm <br />-tacho hersteller stegmann typ dg 60 xsr<br /> -weight 85 kg DC, GEARED MOTOR

-6.8 KW
DC MOTOR MANUFACTURER BAUMULLER TYPE DSG 71-M
GEARBOX MANUFACTURER NORD TYPE 32-2AZ-IEC 90
TRANSLATION 1: 25,88
HOLLOW SHAFT DIAMETER 40 MM
-4000 RPM / 155 RPM
-TACHO HERSTELLER STEGMANN TYP DG 60 XSR
-WEIGHT 85 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more NORD types: