74 ofertas

Año de construcción: usado
Ubicación: Land-glass bottle filling line krones one way 54.000 bph
 
complete line for bottling beer, carbonated and non carbonated soft drinks in one way glass bottles at nominal capacity of 54 000 bph. it was delivered by krones in year 2000 and it was in operation till 2015 and is currently installed and powered. equipment is very well maintaned and it has a complete techncial documentation in english.
 
main characteristics
- capacity 54 000 bph at 0.33 liter bottles
- made by krones in year 2000, in operation till 2015 still installed
- bottle volumes 275, 330 ml and earlier also 660 ml bottles
- total operating hours approx 70.000
- one way line for new glass bottles
- secondary packaging kisters wraparound packer and khs innopac wsp a-m combi packer
- operation controls made with siemens simatic s7 plc system
- overall line efficiency 75 %

list of main equipment:

1. empty bottle pallet transport conveyor system, kensal, year 2010
2. empty bottle depalletiser, kettner pressant universal
- capacity 100 pallets / hour
- layer interleave removal device
- empty pallet stacking device, type 454, model lpmt with max 15 pallet magazine
- empty pallet transport conveyor system
3. empty bottle transport conveyors (mass flow), krones
4. empty bottle transport conveyors/reject lane (single file), krones
5. zero pressure single filer, krones
6. empty bottle inspector krones linatronic
7. filler monobloc (rinser-filler-capper) krones mecafill vk(2v)cf
- short tube filling system for beer and soft drinks with double pre-evacuation before filling
- 132 filling valves, two maxicrown (year 2007) 26 capping stations, one for crown and one for twist off caps
- maxicrown cap feeding system
- inbuilt monoblock cip system
- valve block with buffer tank
- change parts for all bottles sizes
8. full bottle transport conveyor system (filler - pasteuriser), krones
9. full bottle inspector krones checkmat type 707 with swing-push rejection
10. tunnel pasteuriser, sander hansen pb 17.9-504-42, machine number 622
- it has 7 zones total, 4 pasteurization and 3 regerative zones
- total process area 240 m2
- the pasteurizer was refurbished one year ago and it has new martahoon plastic betls and new gear drives.
11. full bottle transport conveyor system (pasteuriser - labellers), krones
12. two bottle driers (air knives)
13. two labelers krones solomatic 018-g88
- combined output between 54.000 bph
- cold glue system, both with two label stations for ready cut paper labels
- rotation l-r and r-l (oposite directions)
- inbuilt no-label checking and rejecting system
- bottle handling change parts and storage racks for parts
14. bottle marking system with
- two videojet inc date coders, model xl 170i uhs af (one for each labeler)
- two domino lazer marker, model dpx1500 digital (one for each labeler)
- two domino digital coder 3, model ddc3l, year 2010 (one for each labeler)
15. two label inspectors, krones checkmat type 707 (one for each line)
16. full bottle transport conveyor system (labelers - kisters) incl. labeler reject conveyor
17. wraparound packer khs kisters innopac wp 070v, year 2005, 70 cycle per min, various configurations with automatic carton feeding system
18. full bottle transport conveyor system (feeding loose bottles to kister combi)
19. khs combi packer, type innopac wsp a-m, year 2011, machine number k-89403431- 000100, max 58 cycles/min, with automatic carton feeding system
20. two finished pack coders, type videojet
21. two lock & pop device made by nordson, in year 2010
22. finished pack transport conveyors
23. finished pack transport spiral elevator made by ambaflex in 2000
24. related electrical control and mcc panels   GLASS BOTTLE FILLING LINE KRONES ONE WAY 54.000 BPH COMPLETE LINE FOR BOTTLING BEER, CARBONATED AND NON CARBONATED SOFT DRINKS IN ONE WAY GLASS BOTTLES AT NOMINAL CAPACITY OF 54 000 BPH. IT WAS DELIVERED BY KRONES IN YEAR 2000 AND IT WAS IN OPERATION TILL 2015 AND IS CURRENTLY INSTALLED AND POWERED. EQUIPMENT IS VERY WELL MAINTANED AND IT HAS A COMPLETE TECHNCIAL DOCUMENTATION IN ENGLISH. MAIN CHARACTERISTICS - CAPACITY 54 000 BPH AT 0.33 LITER BOTTLES - MADE BY KRONES IN YEAR 2000, IN OPERATION TILL 2015 STILL INSTALLED - BOTTLE VOLUMES 275, 330 ML AND EARLIER ALSO 660 ML BOTTLES - TOTAL OPERATING HOURS APPROX 70.000 - ONE WAY LINE FOR NEW GLASS BOTTLES - SECONDARY PACKAGING KISTERS WRAPAROUND PACKER AND KHS INNOPAC WSP A-M COMBI PACKER - OPERATION CONTROLS MADE WITH SIEMENS SIMATIC S7 PLC SYSTEM - OVERALL LINE EFFICIENCY 75 % LIST OF MAIN EQUIPMENT: 1. EMPTY BOTTLE PALLET TRANSPORT CONVEYOR SYSTEM, KENSAL, YEAR 2010 2. EMPTY BOTTLE DEPALLETISER, KETTNER PRESSANT UNIVERSAL - CAPACITY 100 PALLETS / HOUR - LAYER INTERLEAVE REMOVAL DEVICE - EMPTY PALLET STACKING DEVICE, TYPE 454, MODEL LPMT WITH MAX 15 PALLET MAGAZINE - EMPTY PALLET TRANSPORT CONVEYOR SYSTEM 3. EMPTY BOTTLE TRANSPORT CONVEYORS (MASS FLOW), KRONES 4. EMPTY BOTTLE TRANSPORT CONVEYORS/REJECT LANE (SINGLE FILE), KRONES 5. ZERO PRESSURE SINGLE FILER, KRONES 6. EMPTY BOTTLE INSPECTOR KRONES LINATRONIC 7. FILLER MONOBLOC (RINSER-FILLER-CAPPER) KRONES MECAFILL VK(2V)CF - SHORT TUBE FILLING SYSTEM FOR BEER AND SOFT DRINKS WITH DOUBLE PRE-EVACUATION BEFORE FILLING - 132 FILLING VALVES, TWO MAXICROWN (YEAR 2007) 26 CAPPING STATIONS, ONE FOR CROWN AND ONE FOR TWIST OFF CAPS - MAXICROWN CAP FEEDING SYSTEM - INBUILT MONOBLOCK CIP SYSTEM - VALVE BLOCK WITH BUFFER TANK - CHANGE PARTS FOR ALL BOTTLES SIZES 8. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FILLER - PASTEURISER), KRONES 9. FULL BOTTLE INSPECTOR KRONES CHECKMAT TYPE 707 WITH SWING-PUSH REJECTION 10. TUNNEL PASTEURISER, SANDER HANSEN PB 17.9-504-42, MACHINE NUMBER 622 - IT HAS 7 ZONES TOTAL, 4 PASTEURIZATION AND 3 REGERATIVE ZONES - TOTAL PROCESS AREA 240 M2 - THE PASTEURIZER WAS REFURBISHED ONE YEAR AGO AND IT HAS NEW MARTAHOON PLASTIC BETLS AND NEW GEAR DRIVES. 11. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (PASTEURISER - LABELLERS), KRONES 12. TWO BOTTLE DRIERS (AIR KNIVES) 13. TWO LABELERS KRONES SOLOMATIC 018-G88 - COMBINED OUTPUT BETWEEN 54.000 BPH - COLD GLUE SYSTEM, BOTH WITH TWO LABEL STATIONS FOR READY CUT PAPER LABELS - ROTATION L-R AND R-L (OPOSITE DIRECTIONS) - INBUILT NO-LABEL CHECKING AND REJECTING SYSTEM - BOTTLE HANDLING CHANGE PARTS AND STORAGE RACKS FOR PARTS 14. BOTTLE MARKING SYSTEM WITH - TWO VIDEOJET INC DATE CODERS, MODEL XL 170I UHS AF (ONE FOR EACH LABELER) - TWO DOMINO LAZER MARKER, MODEL DPX1500 DIGITAL (ONE FOR EACH LABELER) - TWO DOMINO DIGITAL CODER 3, MODEL DDC3L, YEAR 2010 (ONE FOR EACH LABELER) 15. TWO LABEL INSPECTORS, KRONES CHECKMAT TYPE 707 (ONE FOR EACH LINE) 16. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (LABELERS - KISTERS) INCL. LABELER REJECT CONVEYOR 17. WRAPAROUND PACKER KHS KISTERS INNOPAC WP 070V, YEAR 2005, 70 CYCLE PER MIN, VARIOUS CONFIGURATIONS WITH AUTOMATIC CARTON FEEDING SYSTEM 18. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FEEDING LOOSE BOTTLES TO KISTER COMBI) 19. KHS COMBI PACKER, TYPE INNOPAC WSP A-M, YEAR 2011, MACHINE NUMBER K-89403431- 000100, MAX 58 CYCLES/MIN, WITH AUTOMATIC CARTON FEEDING SYSTEM 20. TWO FINISHED PACK CODERS, TYPE VIDEOJET 21. TWO LOCK & POP DEVICE MADE BY NORDSON, IN YEAR 2010 22. FINISHED PACK TRANSPORT CONVEYORS 23. FINISHED PACK TRANSPORT SPIRAL ELEVATOR MADE BY AMBAFLEX IN 2000 24. RELATED ELECTRICAL CONTROL AND MCC PANELS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec sleeveshrink high speed sleeve shrink machine for bottles/cans (with tray) - ty45<br><br>high speed sleeve shrinking machine to do multipacks of bottles, cans, etc. including module to build up (nordson glue system) and add a tray underneath the multipack. including shrink tunnel. suitable to do 2x3, 3x4, 4x6 or other arrangements of containers. suitable for pe shrink film with a thickness of 60-100µm and a film transverse contraction ratio of 30-40% and a longitudional contraction ratio of 60-70%. <br><br>- specifications: siemens plc control and siemens touchscreen, schneider contactor, festo cylinder, siemens servo motors to feed and cut the film | bottle (can or container) size: 0.25 to 1.5 liter, diameter: 55-120mm, height: 120-300mm | max. dimensions for the complete multipack: l(150-720)xw(250-450)xh(120-300)mm | max. speed of the machine in neutral: 50 cycles/minute | total dimensions: l10070xw1650xh2485mm | weight: 5600kg | power: 380v, 13kw (machine) and 380v, 63.75kw (shrink tunnel) | compressed air: 160 liter/min, 6bar.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SLEEVESHRINK HIGH SPEED SLEEVE SHRINK MACHINE FOR BOTTLES/CANS (WITH TRAY) - TY45

HIGH SPEED SLEEVE SHRINKING MACHINE TO DO MULTIPACKS OF BOTTLES, CANS, ETC. INCLUDING MODULE TO BUILD UP (NORDSON GLUE SYSTEM) AND ADD A TRAY UNDERNEATH THE MULTIPACK. INCLUDING SHRINK TUNNEL. SUITABLE TO DO 2X3, 3X4, 4X6 OR OTHER ARRANGEMENTS OF CONTAINERS. SUITABLE FOR PE SHRINK FILM WITH A THICKNESS OF 60-100µM AND A FILM TRANSVERSE CONTRACTION RATIO OF 30-40% AND A LONGITUDIONAL CONTRACTION RATIO OF 60-70%.

- SPECIFICATIONS: SIEMENS PLC CONTROL AND SIEMENS TOUCHSCREEN, SCHNEIDER CONTACTOR, FESTO CYLINDER, SIEMENS SERVO MOTORS TO FEED AND CUT THE FILM | BOTTLE (CAN OR CONTAINER) SIZE: 0.25 TO 1.5 LITER, DIAMETER: 55-120MM, HEIGHT: 120-300MM | MAX. DIMENSIONS FOR THE COMPLETE MULTIPACK: L(150-720)XW(250-450)XH(120-300)MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 50 CYCLES/MINUTE | TOTAL DIMENSIONS: L10070XW1650XH2485MM | WEIGHT: 5600KG | POWER: 380V, 13KW (MACHINE) AND 380V, 63.75KW (SHRINK TUNNEL) | COMPRESSED AIR: 160 LITER/MIN, 6BAR.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-double power bag with grip hole reinforcement
equipped with:
usable welding and cutting width: 850 mm
bag width (feed length): 220-600 mm
bag height: 280-600 mm
number of lanes 1
maximum number of cycles (cycles / min) 70 cycles / minute
max unwind width 1200 mm
max unwinding diameter 1100 mm
servo
edge guide
photo cell
including - nordson gluing plant of 2002
 DOUBLE POWER BAG WITH GRIP HOLE REINFORCEMENT EQUIPPED WITH: USABLE WELDING AND CUTTING WIDTH: 850 MM BAG WIDTH (FEED LENGTH): 220-600 MM BAG HEIGHT: 280-600 MM NUMBER OF LANES 1 MAXIMUM NUMBER OF CYCLES (CYCLES / MIN) 70 CYCLES / MINUTE MAX UNWIND WIDTH 1200 MM MAX UNWINDING DIAMETER 1100 MM SERVO EDGE GUIDE PHOTO CELL INCLUDING - NORDSON GLUING PLANT OF 2002
Vendedor: Serin Graphische Maschinen
Año de construcción: usado
Ubicación: Land-        <br />accessories: gluing station nordson serie 3400<br />
ACCESSORIES: GLUING STATION NORDSON SERIE 3400
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-there are two identical glue applicators available.  THERE ARE TWO IDENTICAL GLUE APPLICATORS AVAILABLE.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-capacity: 11000  packs/h      <br />formats:  8 x1,5 liter<br />operation / control:  systems lauer<br />accessories: gluing station nordson serie 35<br /> CAPACITY: 11000 PACKS/H
FORMATS: 8 X1,5 LITER
OPERATION / CONTROL: SYSTEMS LAUER
ACCESSORIES: GLUING STATION NORDSON SERIE 35
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-noll can line 3- 1981 - 36,000 cph -250ml slim and 330,355,500ml standard cans			
#	make	description	model no.
1	noll	depalletizer	lord vb 500k
2	noll	empty can conveyor	z3094862
3	noll	can rinser	-
4	noll	filling machine	ah-48
5	angelus	seamer	61h
6	noll	mixomat	s-g12
7	anton paar	anton paar analyzer	cobrix 2
8	filtec	filled can rejector	ft-50
9	noll	full can conveyor	1981
10	noll	can warmer	ds 6000
11	videojet	s2-date coder 8	videojet 170i
12	videojet	s2-date coder 9	videojet 170i
13	khs kister	noll 1 kister packer	97/40
14	khs kister	shrink tunnel	97/40
15	nordson	glue applicator	nordson
16	graphic packing	riverwood, multipack-cube	twinstack
17	nordson	glue applicator	nordson
18	nordson	glue applicator	nordson
19	marsh unicorn	s2-tray coder	marsh unicorn
20	noll	case conveyor	1981
21	noll	palletizer	lord vb 500k
22	m.j.maillis	pallet wrapping machine-siat	typ 16
23	cimpack 300	pallet tag applicator	cimpack 300

for full information visit abc.beveragexchange.co.uk
   NOLL CAN LINE 3- 1981 - 36,000 CPH -250ML SLIM AND 330,355,500ML STANDARD CANS # MAKE DESCRIPTION MODEL NO. 1 NOLL DEPALLETIZER LORD VB 500K 2 NOLL EMPTY CAN CONVEYOR Z3094862 3 NOLL CAN RINSER - 4 NOLL FILLING MACHINE AH-48 5 ANGELUS SEAMER 61H 6 NOLL MIXOMAT S-G12 7 ANTON PAAR ANTON PAAR ANALYZER COBRIX 2 8 FILTEC FILLED CAN REJECTOR FT-50 9 NOLL FULL CAN CONVEYOR 1981 10 NOLL CAN WARMER DS 6000 11 VIDEOJET S2-DATE CODER 8 VIDEOJET 170I 12 VIDEOJET S2-DATE CODER 9 VIDEOJET 170I 13 KHS KISTER NOLL 1 KISTER PACKER 97/40 14 KHS KISTER SHRINK TUNNEL 97/40 15 NORDSON GLUE APPLICATOR NORDSON 16 GRAPHIC PACKING RIVERWOOD, MULTIPACK-CUBE TWINSTACK 17 NORDSON GLUE APPLICATOR NORDSON 18 NORDSON GLUE APPLICATOR NORDSON 19 MARSH UNICORN S2-TRAY CODER MARSH UNICORN 20 NOLL CASE CONVEYOR 1981 21 NOLL PALLETIZER LORD VB 500K 22 M.J.MAILLIS PALLET WRAPPING MACHINE-SIAT TYP 16 23 CIMPACK 300 PALLET TAG APPLICATOR CIMPACK 300 FOR FULL INFORMATION VISIT ABC.BEVERAGEXCHANGE.CO.UK
Vendedor: Pennington (UK) Ltd
Año de construcción: usado
Precio: used machinery auction RESALE 2.400 €
Ubicación: Land-weight approx.: 615 kg<br/>dimensions (l x w x h) approx.: 1550 x 800 x 1850 mm<br/>description: nordson pu melting unit used bm 5550 WEIGHT APPROX.: 615 KG
DIMENSIONS (L X W X H) APPROX.: 1550 X 800 X 1850 MM
DESCRIPTION: NORDSON PU MELTING UNIT USED BM 5550
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 6.000 €
Ubicación: Land- 
-automatic italian folder gluer grassi 90 
-year 1980,max width 90 cms. 
-only for linear gluing 
-can work any type of duplex and corrugated carton 
-hot glue system nordson with 2 spray guns 
-available immediately  -AUTOMATIC ITALIAN FOLDER GLUER GRASSI 90 -YEAR 1980,MAX WIDTH 90 CMS. -ONLY FOR LINEAR GLUING -CAN WORK ANY TYPE OF DUPLEX AND CORRUGATED CARTON -HOT GLUE SYSTEM NORDSON WITH 2 SPRAY GUNS -AVAILABLE IMMEDIATELY
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Precio: used machinery auction RESALE 1.800 €
Ubicación: Land-weight approx.: 136 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 600 mm<br/>description: pu premelter mc7-1x1vf1/x ax 3x400v 50/60hz WEIGHT APPROX.: 136 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 600 MM
DESCRIPTION: PU PREMELTER MC7-1X1VF1/X AX 3X400V 50/60HZ
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-1 of used wrap-around packer, make khs/kisters, type wp 060 v (quick change-over via servos and spindles), new 2008, operating side left. capacity upto 60 cycles/minute. siemens s7 controls with rexroth mi-technology servo drives. nordson problue 50 hot-melt unit. used to pack various glass bottles (diameters 59 - 80 mm) as 4x2, 4x6 and 3x4 loose in wrap-around cartons. 1 OF USED WRAP-AROUND PACKER, MAKE KHS/KISTERS, TYPE WP 060 V (QUICK CHANGE-OVER VIA SERVOS AND SPINDLES), NEW 2008, OPERATING SIDE LEFT. CAPACITY UPTO 60 CYCLES/MINUTE. SIEMENS S7 CONTROLS WITH REXROTH MI-TECHNOLOGY SERVO DRIVES. NORDSON PROBLUE 50 HOT-MELT UNIT. USED TO PACK VARIOUS GLASS BOTTLES (DIAMETERS 59 - 80 MM) AS 4X2, 4X6 AND 3X4 LOOSE IN WRAP-AROUND CARTONS.
Vendedor: ERMI HOLLAND B.V.
Año de construcción: usado
Precio: used machinery auction RESALE 11.400 €
Ubicación: Land-weight approx.: 3000 kg<br/>dimensions (l x w x h) approx.: 6750 x 1200 x 2100 mm<br/>description: max. panel height 60 mm, pressure with idle wheels, no. panel sizing / milling units 1 unit pre-milling unit, edge coil magazine, premelter for polyurethane glue nordson mc series, no. edge processing units 7 processing unit end trimming unit, processing unit fine trimming unit to trim and round, processing unit fine trimming unit to trim and round, processing unit corner rounding unit, processing unit edge scraping unit, processing unit glue scraping unit, processing unit buffing unit, control system power control pc 20, safety standard ce mark WEIGHT APPROX.: 3000 KG
DIMENSIONS (L X W X H) APPROX.: 6750 X 1200 X 2100 MM
DESCRIPTION: MAX. PANEL HEIGHT 60 MM, PRESSURE WITH IDLE WHEELS, NO. PANEL SIZING / MILLING UNITS 1 UNIT PRE-MILLING UNIT, EDGE COIL MAGAZINE, PREMELTER FOR POLYURETHANE GLUE NORDSON MC SERIES, NO. EDGE PROCESSING UNITS 7 PROCESSING UNIT END TRIMMING UNIT, PROCESSING UNIT FINE TRIMMING UNIT TO TRIM AND ROUND, PROCESSING UNIT FINE TRIMMING UNIT TO TRIM AND ROUND, PROCESSING UNIT CORNER ROUNDING UNIT, PROCESSING UNIT EDGE SCRAPING UNIT, PROCESSING UNIT GLUE SCRAPING UNIT, PROCESSING UNIT BUFFING UNIT, CONTROL SYSTEM POWER CONTROL PC 20, SAFETY STANDARD CE MARK
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 49.000 €
Ubicación: Land-d 105
1 ammann ultra clean cup filling machine
for 75 mm cups and for 2 cups in one cup
with amman cup packaging machine
with ammann carton manufacturing machine
with empry caron deliver plant
with electronic cabinet
manufacturer year is 2000
capacity 7.200 cup per hour
constructed as a long round cup filling machine
length of the machine with cup packaging machine 
is 14,9 m, breadth 2,35 m
high included filling station pipe connection and 
cup magazine: 3,65 m

looking from the cup outlet against the running direction 
are installed:
  - 1 pivoting control panel
  - one 4 time cup magazine, high of the magazine 
    is 2,30 m, to bring in the cup packs
    in the magazine are available a ladder with a small stage, 
    high of the stage is 1,20 m

  - one cup sterilisation station, length 3 stroke x 4 cups
    with h2o2 sucking device out of the sterile tunnel.
  - one ”byside” cup filling station for ceralien or 
    small chocolate bowls, transportable to set this filler 
    in the free place of the ammann filling machine
or alternative
-  one “byside” cup filling station for liquid products. 
   a dosing filler with 4 filling heads
    after this station will follow a 180° turn of the chain to the
  - one  main cup filling station for liquid products. a dosing filler 
    with 4 filling heads
  - one 4 times lid magazine station with lid sterilisation with 
    electric energy
  - one 4 times lid sealing station
  - one lid pressing station
  - one cup lifting area, placed short before the chain turn to 180°, 
    on the outlet cup conveyor
  - two equal labelling machine, what are installed on both side 
    of the outlet transport conveyor
  - one ammann cup packaging machine into an open carton
    manufacturer year: 2000
    0ne outlet carton transport conveyor, length 1,5 m  
 
  - one ammann carton producing machine, type sh 6
    machine nro: 1174, manufacturer year is 2000
    with nordson glue technology, outlet carton conveyor 1 m
  - with a sema carton lift machine
  - with e empty carton transport conveyor is complete  
    installed taken down from the ceiling, existing about:
    7 m straightly carton transport conveyor
    2 x 90° curves
    1 carton slide to the high of the inlet of the ammann 
     packaging machine
    the empty carton running transverse into the packaging 
    machine
    the measurement of a tray is: lxbxh: 23,3 cm x 39,5 cm, 
    high 4,6 cm, place for 10 x 120 g cups.

-  1 electronic cabinet standing on feet
    with cable connection to the filling machine
    space between cabinet and filling machine is 1,30 m
    with 3 doors and with a operation panel.
    with siemens s 5 installation
    length: 2,35 m, breadth 55 cm
-  1 cip collecting reservoir, rectangular construction
 with nieveau control
 with pipe sive and cip centrifugal pump. 
price up standing point:			 49.000,00 euro





          D 105 1 AMMANN ULTRA CLEAN CUP FILLING MACHINE FOR 75 MM CUPS AND FOR 2 CUPS IN ONE CUP WITH AMMAN CUP PACKAGING MACHINE WITH AMMANN CARTON MANUFACTURING MACHINE WITH EMPRY CARON DELIVER PLANT WITH ELECTRONIC CABINET MANUFACTURER YEAR IS 2000 CAPACITY 7.200 CUP PER HOUR CONSTRUCTED AS A LONG ROUND CUP FILLING MACHINE LENGTH OF THE MACHINE WITH CUP PACKAGING MACHINE IS 14,9 M, BREADTH 2,35 M HIGH INCLUDED FILLING STATION PIPE CONNECTION AND CUP MAGAZINE: 3,65 M LOOKING FROM THE CUP OUTLET AGAINST THE RUNNING DIRECTION ARE INSTALLED: - 1 PIVOTING CONTROL PANEL - ONE 4 TIME CUP MAGAZINE, HIGH OF THE MAGAZINE IS 2,30 M, TO BRING IN THE CUP PACKS IN THE MAGAZINE ARE AVAILABLE A LADDER WITH A SMALL STAGE, HIGH OF THE STAGE IS 1,20 M - ONE CUP STERILISATION STATION, LENGTH 3 STROKE X 4 CUPS WITH H2O2 SUCKING DEVICE OUT OF THE STERILE TUNNEL. - ONE ”BYSIDE” CUP FILLING STATION FOR CERALIEN OR SMALL CHOCOLATE BOWLS, TRANSPORTABLE TO SET THIS FILLER IN THE FREE PLACE OF THE AMMANN FILLING MACHINE OR ALTERNATIVE - ONE “BYSIDE” CUP FILLING STATION FOR LIQUID PRODUCTS. A DOSING FILLER WITH 4 FILLING HEADS AFTER THIS STATION WILL FOLLOW A 180° TURN OF THE CHAIN TO THE - ONE MAIN CUP FILLING STATION FOR LIQUID PRODUCTS. A DOSING FILLER WITH 4 FILLING HEADS - ONE 4 TIMES LID MAGAZINE STATION WITH LID STERILISATION WITH ELECTRIC ENERGY - ONE 4 TIMES LID SEALING STATION - ONE LID PRESSING STATION - ONE CUP LIFTING AREA, PLACED SHORT BEFORE THE CHAIN TURN TO 180°, ON THE OUTLET CUP CONVEYOR - TWO EQUAL LABELLING MACHINE, WHAT ARE INSTALLED ON BOTH SIDE OF THE OUTLET TRANSPORT CONVEYOR - ONE AMMANN CUP PACKAGING MACHINE INTO AN OPEN CARTON MANUFACTURER YEAR: 2000 0NE OUTLET CARTON TRANSPORT CONVEYOR, LENGTH 1,5 M - ONE AMMANN CARTON PRODUCING MACHINE, TYPE SH 6 MACHINE NRO: 1174, MANUFACTURER YEAR IS 2000 WITH NORDSON GLUE TECHNOLOGY, OUTLET CARTON CONVEYOR 1 M - WITH A SEMA CARTON LIFT MACHINE - WITH E EMPTY CARTON TRANSPORT CONVEYOR IS COMPLETE INSTALLED TAKEN DOWN FROM THE CEILING, EXISTING ABOUT: 7 M STRAIGHTLY CARTON TRANSPORT CONVEYOR 2 X 90° CURVES 1 CARTON SLIDE TO THE HIGH OF THE INLET OF THE AMMANN PACKAGING MACHINE THE EMPTY CARTON RUNNING TRANSVERSE INTO THE PACKAGING MACHINE THE MEASUREMENT OF A TRAY IS: LXBXH: 23,3 CM X 39,5 CM, HIGH 4,6 CM, PLACE FOR 10 X 120 G CUPS. - 1 ELECTRONIC CABINET STANDING ON FEET WITH CABLE CONNECTION TO THE FILLING MACHINE SPACE BETWEEN CABINET AND FILLING MACHINE IS 1,30 M WITH 3 DOORS AND WITH A OPERATION PANEL. WITH SIEMENS S 5 INSTALLATION LENGTH: 2,35 M, BREADTH 55 CM - 1 CIP COLLECTING RESERVOIR, RECTANGULAR CONSTRUCTION WITH NIEVEAU CONTROL WITH PIPE SIVE AND CIP CENTRIFUGAL PUMP. PRICE UP STANDING POINT: 49.000,00 EURO
Vendedor: LM Dairy Consulting
Año de construcción: usado
Precio: used machinery auction RESALE 33.000 €
Ubicación: Land-weight approx.: 5800 kg<br/>dimensions (l x w x h) approx.: 8750 x 1300 x 1900 mm<br/>description: max. panel height 60 mm, pressure with rubber belt, panel support guides with positioning by nc, no. panel sizing / milling units 1 unit pre-milling unit, edge coil magazine no. positions 24, premelter for polyurethane glue nordson mc series, no. edge processing units 6 processing unit end trimming unit, processing unit top and bottom rough trimming unit, processing unit corner rounding unit, constructor model fk 13 automatic tool change, processing unit edge scraping unit, processing unit glue scraping unit, processing unit buffing unit, control system power control pc 22, safety standard ce mark WEIGHT APPROX.: 5800 KG
DIMENSIONS (L X W X H) APPROX.: 8750 X 1300 X 1900 MM
DESCRIPTION: MAX. PANEL HEIGHT 60 MM, PRESSURE WITH RUBBER BELT, PANEL SUPPORT GUIDES WITH POSITIONING BY NC, NO. PANEL SIZING / MILLING UNITS 1 UNIT PRE-MILLING UNIT, EDGE COIL MAGAZINE NO. POSITIONS 24, PREMELTER FOR POLYURETHANE GLUE NORDSON MC SERIES, NO. EDGE PROCESSING UNITS 6 PROCESSING UNIT END TRIMMING UNIT, PROCESSING UNIT TOP AND BOTTOM ROUGH TRIMMING UNIT, PROCESSING UNIT CORNER ROUNDING UNIT, CONSTRUCTOR MODEL FK 13 AUTOMATIC TOOL CHANGE, PROCESSING UNIT EDGE SCRAPING UNIT, PROCESSING UNIT GLUE SCRAPING UNIT, PROCESSING UNIT BUFFING UNIT, CONTROL SYSTEM POWER CONTROL PC 22, SAFETY STANDARD CE MARK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-complete packing line for liquid/gel products in sticks, comprising merz spm-50 5-lane stick pack machine with 5 peristaltic pumps, dosing range 0.5ml to 100ml. currently set for 24mm wide sticks, length variable 40 - 180mm, fill volume 2 - 15 ml. with additional format parts, the stick width can be between 17 to 35mm wide, fitted with gas flushing, siemens s7-300 plc, and multi-lane hot foil printer (print area 55 x 40mm per head). ocs checkweigher with reject device, automatic transfer with 3 camera controlled pick and place robots into a brunner vcl-180s vertical cartoner. carton size range min. 20 x 20 x 60 mm (axbxh), max. 150 x 100 x 200 mm (axbxh). the number of sticks in the carton adjustable from 1 to 40 sticks. fitted with guk fa21/4 sva/21 cartonac 91 leaflet folder for flat sheet leaflets, with argus 6012 code reader and missing leaflet in carton detection. cartoner suitable for tuck closure as well as glue closure using a nordson hot glue system, and fitted with a wolke m600 ink jet printer for variable data/datamatrix codes on the base of the carton. output up to 300 sticks per minute and 60 cartons per minute. year 2010. first class condition, little used. COMPLETE PACKING LINE FOR LIQUID/GEL PRODUCTS IN STICKS, COMPRISING MERZ SPM-50 5-LANE STICK PACK MACHINE WITH 5 PERISTALTIC PUMPS, DOSING RANGE 0.5ML TO 100ML. CURRENTLY SET FOR 24MM WIDE STICKS, LENGTH VARIABLE 40 - 180MM, FILL VOLUME 2 - 15 ML. WITH ADDITIONAL FORMAT PARTS, THE STICK WIDTH CAN BE BETWEEN 17 TO 35MM WIDE, FITTED WITH GAS FLUSHING, SIEMENS S7-300 PLC, AND MULTI-LANE HOT FOIL PRINTER (PRINT AREA 55 X 40MM PER HEAD). OCS CHECKWEIGHER WITH REJECT DEVICE, AUTOMATIC TRANSFER WITH 3 CAMERA CONTROLLED PICK AND PLACE ROBOTS INTO A BRUNNER VCL-180S VERTICAL CARTONER. CARTON SIZE RANGE MIN. 20 X 20 X 60 MM (AXBXH), MAX. 150 X 100 X 200 MM (AXBXH). THE NUMBER OF STICKS IN THE CARTON ADJUSTABLE FROM 1 TO 40 STICKS. FITTED WITH GUK FA21/4 SVA/21 CARTONAC 91 LEAFLET FOLDER FOR FLAT SHEET LEAFLETS, WITH ARGUS 6012 CODE READER AND MISSING LEAFLET IN CARTON DETECTION. CARTONER SUITABLE FOR TUCK CLOSURE AS WELL AS GLUE CLOSURE USING A NORDSON HOT GLUE SYSTEM, AND FITTED WITH A WOLKE M600 INK JET PRINTER FOR VARIABLE DATA/DATAMATRIX CODES ON THE BASE OF THE CARTON. OUTPUT UP TO 300 STICKS PER MINUTE AND 60 CARTONS PER MINUTE. YEAR 2010. FIRST CLASS CONDITION, LITTLE USED.
Vendedor: Hauser Maschinen e.K.
Año de construcción: usado
Ubicación: Land-24.000 bottles / h
nordson hot glue device
- optionally reconditioned - 24.000 BOTTLES / H NORDSON HOT GLUE DEVICE - OPTIONALLY RECONDITIONED -
Vendedor: Ohrter Getränkemaschinen Handel
Año de construcción: usado
Precio: 25.000 GBP
Ubicación: Land-automatic intermittent motion horizontal cartoning machine. product infeed chain designed to be connected to various available automatic feeding units. simultaneous adjustment of all infeed buckets (related to product width). simplified magazine guide and pickup adjustment. 800mm carton magazine with pusher belt, adjustable for different sizes with minimum load control, programmable for different pack sizes. carton transport system centrally adjustable and equipped with digitahttps://www.resale.de/add.php?lang=en&gruppe=404&other=1&hersteller=&modell=&typd=&type=&beschreibung=&sellerid=&film=&standorttld=&standort=&auktion=0&order=1&l indicators. widening of the belt transport system performed with hand wheel and digital indicators to suit carton length. easy changeover, compact and reliable design. minimum and maximum carton sizes: length 80mm to 200mm, width 40mm to 165mm, height 20mm to 100mm. flight pitch 150mm. siemens simatic hmi and plc. vacuum pick and place carton feeder. argus laetus barcode reader. nordson pro blue 4 twin head hot melt closing unit. machine size: 3595mm x 1752mm x approx. 2000mm high, approx. weight 2000kg. recently taken out of production. excellent condition AUTOMATIC INTERMITTENT MOTION HORIZONTAL CARTONING MACHINE. PRODUCT INFEED CHAIN DESIGNED TO BE CONNECTED TO VARIOUS AVAILABLE AUTOMATIC FEEDING UNITS. SIMULTANEOUS ADJUSTMENT OF ALL INFEED BUCKETS (RELATED TO PRODUCT WIDTH). SIMPLIFIED MAGAZINE GUIDE AND PICKUP ADJUSTMENT. 800MM CARTON MAGAZINE WITH PUSHER BELT, ADJUSTABLE FOR DIFFERENT SIZES WITH MINIMUM LOAD CONTROL, PROGRAMMABLE FOR DIFFERENT PACK SIZES. CARTON TRANSPORT SYSTEM CENTRALLY ADJUSTABLE AND EQUIPPED WITH DIGITAHTTPS://WWW.RESALE.DE/ADD.PHP?LANG=EN&GRUPPE=404&OTHER=1&HERSTELLER=&MODELL=&TYPD=&TYPE=&BESCHREIBUNG=&SELLERID=&FILM=&STANDORTTLD=&STANDORT=&AUKTION=0&ORDER=1&L INDICATORS. WIDENING OF THE BELT TRANSPORT SYSTEM PERFORMED WITH HAND WHEEL AND DIGITAL INDICATORS TO SUIT CARTON LENGTH. EASY CHANGEOVER, COMPACT AND RELIABLE DESIGN. MINIMUM AND MAXIMUM CARTON SIZES: LENGTH 80MM TO 200MM, WIDTH 40MM TO 165MM, HEIGHT 20MM TO 100MM. FLIGHT PITCH 150MM. SIEMENS SIMATIC HMI AND PLC. VACUUM PICK AND PLACE CARTON FEEDER. ARGUS LAETUS BARCODE READER. NORDSON PRO BLUE 4 TWIN HEAD HOT MELT CLOSING UNIT. MACHINE SIZE: 3595MM X 1752MM X APPROX. 2000MM HIGH, APPROX. WEIGHT 2000KG. RECENTLY TAKEN OUT OF PRODUCTION. EXCELLENT CONDITION
Vendedor: Lex Machinery Ltd
Año de construcción: usado
Ubicación: Land-24.000 bottles / h
nordson hot glue device
- optionally reconditioned - 24.000 BOTTLES / H NORDSON HOT GLUE DEVICE - OPTIONALLY RECONDITIONED -
Vendedor: Ohrter Getränkemaschinen Handel
Año de construcción: usado
Ubicación: Land-powder coating plant: accustrip, nordson, weishaupt, stainless steel pretreatment tunnel

year of manufacture: 2007
technical condition: very good

powder coating plant with opening: h=1800mm x w=1000mm x max product length l=5000mm

pre-treatment plant made of stainless steel aisi 316: 3 zones
drying oven 250kw heated by gas
cure oven 250kw heated by gas
weishaupt burner
chain conveyors

powder booth made of steel and aluminium equipped with nordson tribomatic incl. 10 powder pistols (5 right + 5 left)
each gun equipped with 8 spray nozzles, so powder is applied with 40 spray nozzles on each side
cyclone, filter

available in february 2019.
plant must be dismantled and picked up by the buyer. POWDER COATING PLANT: ACCUSTRIP, NORDSON, WEISHAUPT, STAINLESS STEEL PRETREATMENT TUNNEL YEAR OF MANUFACTURE: 2007 TECHNICAL CONDITION: VERY GOOD POWDER COATING PLANT WITH OPENING: H=1800MM X W=1000MM X MAX PRODUCT LENGTH L=5000MM PRE-TREATMENT PLANT MADE OF STAINLESS STEEL AISI 316: 3 ZONES DRYING OVEN 250KW HEATED BY GAS CURE OVEN 250KW HEATED BY GAS WEISHAUPT BURNER CHAIN CONVEYORS POWDER BOOTH MADE OF STEEL AND ALUMINIUM EQUIPPED WITH NORDSON TRIBOMATIC INCL. 10 POWDER PISTOLS (5 RIGHT + 5 LEFT) EACH GUN EQUIPPED WITH 8 SPRAY NOZZLES, SO POWDER IS APPLIED WITH 40 SPRAY NOZZLES ON EACH SIDE CYCLONE, FILTER AVAILABLE IN FEBRUARY 2019. PLANT MUST BE DISMANTLED AND PICKED UP BY THE BUYER.
Vendedor: TDMW.PL Igor Kaliniec
Año de construcción: usado
Ubicación: Land-equipped with nordson-gluer.<br/>glue: hot glue <br/>bottle format: 0,75 l. <br/>carton format: <br/>292 mm x 198 mm x 342 mm or <br/>248 mm x 188 mm x 340 mm. <br/>id5535 EQUIPPED WITH NORDSON-GLUER.
GLUE: HOT GLUE
BOTTLE FORMAT: 0,75 L.
CARTON FORMAT:
292 MM X 198 MM X 342 MM OR
248 MM X 188 MM X 340 MM.
ID5535
Vendedor: Seegräber GmbH
Año de construcción: usado
Ubicación: Land-khs innopal pb 2 palletizing line 450 p/h with pallet wrapper and marking 
  
complete palletizing line with packed infeed conveyor, packed marking system, double palletizing system, pallet conveyors and pallet magazine, pallet stretch wrapper and pallet marking. line capacity is 450 pallet / hours and it is used for shrink wrapped glass bottles but it is sutable for various type of packages. it palletizes packs of different sizes and properties extremely gently and processes different pallet types. this line is installed and powered today. 
 
the following main equipment is included to this line
•	delivery pack conveyor system 10 meters 
•	palletizer khs innopal pb 2 bn h, year 2004, double system with pallet magazine 
•	control panel with siemens s 7 plc system 
•	pallet stretch wrapping machine robopac genesis  with siemens s7-300 plc 
•	pallet conveyor system sasib
 
 
optional equipment: 
•	printer applicator metec tb 102, year 2013 for distribution packages
•	nordson hot glue system for delivery package top anti-skidding purpose
•	pallet label applicator and roller conveyor turning device  
 
   KHS INNOPAL PB 2 PALLETIZING LINE 450 P/H WITH PALLET WRAPPER AND MARKING COMPLETE PALLETIZING LINE WITH PACKED INFEED CONVEYOR, PACKED MARKING SYSTEM, DOUBLE PALLETIZING SYSTEM, PALLET CONVEYORS AND PALLET MAGAZINE, PALLET STRETCH WRAPPER AND PALLET MARKING. LINE CAPACITY IS 450 PALLET / HOURS AND IT IS USED FOR SHRINK WRAPPED GLASS BOTTLES BUT IT IS SUTABLE FOR VARIOUS TYPE OF PACKAGES. IT PALLETIZES PACKS OF DIFFERENT SIZES AND PROPERTIES EXTREMELY GENTLY AND PROCESSES DIFFERENT PALLET TYPES. THIS LINE IS INSTALLED AND POWERED TODAY. THE FOLLOWING MAIN EQUIPMENT IS INCLUDED TO THIS LINE • DELIVERY PACK CONVEYOR SYSTEM 10 METERS • PALLETIZER KHS INNOPAL PB 2 BN H, YEAR 2004, DOUBLE SYSTEM WITH PALLET MAGAZINE • CONTROL PANEL WITH SIEMENS S 7 PLC SYSTEM • PALLET STRETCH WRAPPING MACHINE ROBOPAC GENESIS WITH SIEMENS S7-300 PLC • PALLET CONVEYOR SYSTEM SASIB OPTIONAL EQUIPMENT: • PRINTER APPLICATOR METEC TB 102, YEAR 2013 FOR DISTRIBUTION PACKAGES • NORDSON HOT GLUE SYSTEM FOR DELIVERY PACKAGE TOP ANTI-SKIDDING PURPOSE • PALLET LABEL APPLICATOR AND ROLLER CONVEYOR TURNING DEVICE
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 120 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-1 of used wrap-around packer, make khs/kisters, type wp60 (quick change-over via servo¹s and spindles), new 2005, capacity upto 60 cycles per minute, allen bradley controls, nordson hotmelt unit. operating side: right. last used for glass bottles: 275 ml, d 57 x h 208 mm as 3x4=12, 3x5=15, 3x6=18, 4x5=20 and 4x6=24 bottles/case. 300 ml, d 57 x h 219 mm as 3x4=12, 3x5=15, 3x6=18, 4x5=20 and 4x6=24 bottles/case. 330 ml, d 58.9 x h 225 mm as 3x4=12 bottles/case. 1 OF USED WRAP-AROUND PACKER, MAKE KHS/KISTERS, TYPE WP60 (QUICK CHANGE-OVER VIA SERVO¹S AND SPINDLES), NEW 2005, CAPACITY UPTO 60 CYCLES PER MINUTE, ALLEN BRADLEY CONTROLS, NORDSON HOTMELT UNIT. OPERATING SIDE: RIGHT. LAST USED FOR GLASS BOTTLES: 275 ML, D 57 X H 208 MM AS 3X4=12, 3X5=15, 3X6=18, 4X5=20 AND 4X6=24 BOTTLES/CASE. 300 ML, D 57 X H 219 MM AS 3X4=12, 3X5=15, 3X6=18, 4X5=20 AND 4X6=24 BOTTLES/CASE. 330 ML, D 58.9 X H 225 MM AS 3X4=12 BOTTLES/CASE.
Vendedor: ERMI HOLLAND B.V.
Año de construcción: usado
Precio: 120 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-we sell a manschettierungsanlage originally used for dwarf fruit yogurt (single - and doppellagigkeit) with 80 packs per minute. the appliance is equipped with an additional part of the format. the plant is in a good condition and was as visually to recognize is regularly serviced. maschnnr. 05004.. the system can be optionally rebuilt. the system is with a nordson gluing unit with a 1 hose system. is additionally have the option to acquire an inkjet. (spare parts for all spare parts are available and can be purchased optionally also).       
 WE SELL A MANSCHETTIERUNGSANLAGE ORIGINALLY USED FOR DWARF FRUIT YOGURT (SINGLE - AND DOPPELLAGIGKEIT) WITH 80 PACKS PER MINUTE. THE APPLIANCE IS EQUIPPED WITH AN ADDITIONAL PART OF THE FORMAT. THE PLANT IS IN A GOOD CONDITION AND WAS AS VISUALLY TO RECOGNIZE IS REGULARLY SERVICED. MASCHNNR. 05004.. THE SYSTEM CAN BE OPTIONALLY REBUILT. THE SYSTEM IS WITH A NORDSON GLUING UNIT WITH A 1 HOSE SYSTEM. IS ADDITIONALLY HAVE THE OPTION TO ACQUIRE AN INKJET. (SPARE PARTS FOR ALL SPARE PARTS ARE AVAILABLE AND CAN BE PURCHASED OPTIONALLY ALSO).
Vendedor: MHS SYSTEMBAU Verpackungstechnik
Año de construcción: usado
Precio: 120 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 4.000 GBP
Ubicación: Land-nordson series 3100 hot melt applicator. electric operation 3100v/200-240 ac, designed for high-line speeds. controls melt adhesive flow to setpoint temperatures selected by the operator. system heat rate is 3.6kg/hour. operating temperature range from 70 deg c to 230 deg c (max) with tank capacity of 3714ml/3.6kg. featuring cast-in heaters and integral melting fins, the 3714ml tank provides efficient heat transfer and is ptfe coated for easy cleaning. machine size approx. 595mm x 343mm x 697mm (max height). machine weight 44kg when empty. checked/tested/running NORDSON SERIES 3100 HOT MELT APPLICATOR. ELECTRIC OPERATION 3100V/200-240 AC, DESIGNED FOR HIGH-LINE SPEEDS. CONTROLS MELT ADHESIVE FLOW TO SETPOINT TEMPERATURES SELECTED BY THE OPERATOR. SYSTEM HEAT RATE IS 3.6KG/HOUR. OPERATING TEMPERATURE RANGE FROM 70 DEG C TO 230 DEG C (MAX) WITH TANK CAPACITY OF 3714ML/3.6KG. FEATURING CAST-IN HEATERS AND INTEGRAL MELTING FINS, THE 3714ML TANK PROVIDES EFFICIENT HEAT TRANSFER AND IS PTFE COATED FOR EASY CLEANING. MACHINE SIZE APPROX. 595MM X 343MM X 697MM (MAX HEIGHT). MACHINE WEIGHT 44KG WHEN EMPTY. CHECKED/TESTED/RUNNING
Vendedor: Lex Machinery Ltd
Año de construcción: usado
Precio: 350 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land- pcb production line

 

1,des line

make:sini(korea)

capacity:10,000sheet

purpose:development.etching,

product aize:150mm x150mm~650mm x650mm

product thickness:0.05~3.2mm

 

2.psr developing line

make:tokyo(japan)

purpose:development of psr

capacity:10,000sheet

product aize:150mm x150mm~650mm x650mm

product thickness:0.05~3.2mm

 

3.4-axis grinder

make:maruzen(japan)

capacity:10,000sheet

 

4,exposure

make:gionc(korea)

woking zone:600x750mm

 

5.pre heater

make:mck(korea)

year:2001

 

7.manual laminator

 

8.slide printing machine

 

9.3-dimensions measurement

 

10.chiller

 

11.air conditioner

 

13. inspecta hpl

make:pluitec

year:2012

purpose:holl drill

inspection area:760x650mm

drilling area:986 x745mm

 

14.dp100-sl

make:orbotech

year;2010

purpose:image forming

uv laser

max.substrite size: 660x810mm

15.duo

make:pluitec

year:2012

 

19.pv

make:orbotech

year:2007

purpose:check of circuit.

 

22.agt bby x2sets

make:micro craft

purpose:pcb bare board tester

product:670x650mm

 

23.photo plotter

make:orbotech

purpose:printing of pcb film

26.copper sander

purpose:copper film grinding

max panel size:760 x760mm

 

39.blaster

make:orbothec

year:2004

purpose:circuit check(aoi)

max.substrte size:635 x812mm

 

40.oxide

 

41.film punching machine

 

47.hot press

platen:775x775mm

 

48.oven,printer

 

50.atg bbt

 

51.oxide line

 

59. electroless plating line

 

60.plating line

year:2014

 

63,alkaline etching line

make:pluritec

year;2014

 

64.jet scrubber line

make:pluritec

year;2014

 

65.duo routing

 make:pluritec

year;2007

 

66.multistation

 

67.x-vision

make:pluritec

year;2014

 

68.aoi equipment

make:camtek

year;2014

 

69.march plasma system

make:nordson

year;2014

 

70 n2 gas generator

max panel size: 26inch x28inch PCB PRODUCTION LINE 1,DES LINE MAKE:SINI(KOREA) CAPACITY:10,000SHEET PURPOSE:DEVELOPMENT.ETCHING, PRODUCT AIZE:150MM X150MM~650MM X650MM PRODUCT THICKNESS:0.05~3.2MM 2.PSR DEVELOPING LINE MAKE:TOKYO(JAPAN) PURPOSE:DEVELOPMENT OF PSR CAPACITY:10,000SHEET PRODUCT AIZE:150MM X150MM~650MM X650MM PRODUCT THICKNESS:0.05~3.2MM 3.4-AXIS GRINDER MAKE:MARUZEN(JAPAN) CAPACITY:10,000SHEET 4,EXPOSURE MAKE:GIONC(KOREA) WOKING ZONE:600X750MM 5.PRE HEATER MAKE:MCK(KOREA) YEAR:2001 7.MANUAL LAMINATOR 8.SLIDE PRINTING MACHINE 9.3-DIMENSIONS MEASUREMENT 10.CHILLER 11.AIR CONDITIONER 13. INSPECTA HPL MAKE:PLUITEC YEAR:2012 PURPOSE:HOLL DRILL INSPECTION AREA:760X650MM DRILLING AREA:986 X745MM 14.DP100-SL MAKE:ORBOTECH YEAR;2010 PURPOSE:IMAGE FORMING UV LASER MAX.SUBSTRITE SIZE: 660X810MM 15.DUO MAKE:PLUITEC YEAR:2012 19.PV MAKE:ORBOTECH YEAR:2007 PURPOSE:CHECK OF CIRCUIT. 22.AGT BBY X2SETS MAKE:MICRO CRAFT PURPOSE:PCB BARE BOARD TESTER PRODUCT:670X650MM 23.PHOTO PLOTTER MAKE:ORBOTECH PURPOSE:PRINTING OF PCB FILM 26.COPPER SANDER PURPOSE:COPPER FILM GRINDING MAX PANEL SIZE:760 X760MM 39.BLASTER MAKE:ORBOTHEC YEAR:2004 PURPOSE:CIRCUIT CHECK(AOI) MAX.SUBSTRTE SIZE:635 X812MM 40.OXIDE 41.FILM PUNCHING MACHINE 47.HOT PRESS PLATEN:775X775MM 48.OVEN,PRINTER 50.ATG BBT 51.OXIDE LINE 59. ELECTROLESS PLATING LINE 60.PLATING LINE YEAR:2014 63,ALKALINE ETCHING LINE MAKE:PLURITEC YEAR;2014 64.JET SCRUBBER LINE MAKE:PLURITEC YEAR;2014 65.DUO ROUTING MAKE:PLURITEC YEAR;2007 66.MULTISTATION 67.X-VISION MAKE:PLURITEC YEAR;2014 68.AOI EQUIPMENT MAKE:CAMTEK YEAR;2014 69.MARCH PLASMA SYSTEM MAKE:NORDSON YEAR;2014 70 N2 GAS GENERATOR MAX PANEL SIZE: 26INCH X28INCH
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 350 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 25.000 GBP
Ubicación: Land-multipack frb500 box former. fully guarded, automatic former for cardboard boxes and trays. up to 20-50 boxes per minute and up to 40 trays per minute both depending on size and material thickness. max size of formed boxes 300mm length x 250mm width. power: 11kw/400v, 3ph, 50-60hz with 6 bar air pressure. noise level 75-78 dba (max). allen bradley panel view operator control panel. complete with nordson 3400 series melt adhesive applicator. overall machine size: 6400mm x 1600mm x 2300mm high (including beacon), approx. weight 3,000kg MULTIPACK FRB500 BOX FORMER. FULLY GUARDED, AUTOMATIC FORMER FOR CARDBOARD BOXES AND TRAYS. UP TO 20-50 BOXES PER MINUTE AND UP TO 40 TRAYS PER MINUTE BOTH DEPENDING ON SIZE AND MATERIAL THICKNESS. MAX SIZE OF FORMED BOXES 300MM LENGTH X 250MM WIDTH. POWER: 11KW/400V, 3PH, 50-60HZ WITH 6 BAR AIR PRESSURE. NOISE LEVEL 75-78 DBA (MAX). ALLEN BRADLEY PANEL VIEW OPERATOR CONTROL PANEL. COMPLETE WITH NORDSON 3400 SERIES MELT ADHESIVE APPLICATOR. OVERALL MACHINE SIZE: 6400MM X 1600MM X 2300MM HIGH (INCLUDING BEACON), APPROX. WEIGHT 3,000KG
Vendedor: Lex Machinery Ltd
Año de construcción: usado
Ubicación: Land-        <br />accessories: gluing station nordson serie 3400 v<br />
ACCESSORIES: GLUING STATION NORDSON SERIE 3400 V
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-we sell various nordson order heads and hot glue nozzles and hot glue hoses. 7 piece hot glue hoses 1-3 mtr. (new and used), 25 pieces hot glue heads, 30 solenoid valves, over 150 hot glue nozzles, 5 piece nordson piston pump (3 new 2 used, 1 piece nordson hot glue device to the exploit or carrier of part of, etc.)        WE SELL VARIOUS NORDSON ORDER HEADS AND HOT GLUE NOZZLES AND HOT GLUE HOSES. 7 PIECE HOT GLUE HOSES 1-3 MTR. (NEW AND USED), 25 PIECES HOT GLUE HEADS, 30 SOLENOID VALVES, OVER 150 HOT GLUE NOZZLES, 5 PIECE NORDSON PISTON PUMP (3 NEW 2 USED, 1 PIECE NORDSON HOT GLUE DEVICE TO THE EXPLOIT OR CARRIER OF PART OF, ETC.)
Vendedor: MHS SYSTEMBAU Verpackungstechnik
Año de construcción: usado
Ubicación: Land-weight approx.: 25000 kg<br/>control: power control pc22 <br/>dimensions (l x w x h) approx.: 39000 x 2500 x 2900 mm<br/>hollow width: 2000 mm<br/>workpiece thickness: max. 40 mm<br/>gluing unit: nordson / u80 <br/>rough trimming unit: ja / yes <br/>fine trimming unit: ja / yes <br/>universal trimming unit: ja / yes <br/>flat scraping unit: ja / yes <br/>edge buffing unit: ja / yes <br/>material feeding: ja / yes <br/>description: homag profi vfl 610/39/p/a/20 post forming machine WEIGHT APPROX.: 25000 KG
CONTROL: POWER CONTROL PC22
DIMENSIONS (L X W X H) APPROX.: 39000 X 2500 X 2900 MM
HOLLOW WIDTH: 2000 MM
WORKPIECE THICKNESS: MAX. 40 MM
GLUING UNIT: NORDSON / U80
ROUGH TRIMMING UNIT: JA / YES
FINE TRIMMING UNIT: JA / YES
UNIVERSAL TRIMMING UNIT: JA / YES
FLAT SCRAPING UNIT: JA / YES
EDGE BUFFING UNIT: JA / YES
MATERIAL FEEDING: JA / YES
DESCRIPTION: HOMAG PROFI VFL 610/39/P/A/20 POST FORMING MACHINE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-hotmelt dispenser nordson meltex mx 4012-172<br/>  <br/>  year 1995 - serial-no. 01031295<br/>  <br/>  -available immediately -<br/>  -can be inspect-<br/>  -on stock-; very good HOTMELT DISPENSER NORDSON MELTEX MX 4012-172

YEAR 1995 - SERIAL-NO. 01031295

-AVAILABLE IMMEDIATELY -
-CAN BE INSPECT-
-ON STOCK-; VERY GOOD
Vendedor: F1-TRADE GmbH
Año de construcción: usado
Ubicación: Land-perfect binding line kolbus ratiobinder 2000 km 472.a<br/>  <br/>  year 2003 - serial-no. 517<br/>  <br/>  gathering machine kolbus zu 840<br/>  12 stations book block feeders with short handfeeding station<br/>  signature recognition system and automatic section thickness control atc<br/>  connection unit as transfer channel to the binder - integrated jogging station<br/>  reject unit as 840 to the right<br/>  card-tipper type ki 224 zu<br/>  <br/>  ratiobinder 2000 km 472.a - 21 clamps<br/>  co-pilot<br/>  main milling<br/>  hotmelt spine glue and hotmelt side glue <br/>  premelter kolbus lh 370<br/>  nordson xno 920 pur spine gluing system<br/>  pile cover feeder<br/>  laydown delivery<br/>  <br/>  conveyors belt with dropgate ambaflex cooling tower(details on request)<br/>  <br/>  splitting saw kolbus metris - year 2003 - serial-no. 817v0010<br/>  <br/>  three knife trimmer kolbus hd 151.p<br/>  year 2003 - serial-no. 622<br/>  book infeed from the right<br/>  automated servo motor with co-pilot make-ready<br/>  <br/>  stacker omg bluestar - year 2003 - serial-no. 631<br/>  <br/>  shrink-wrap machine cmc fa-600 bt - year 2003 - serial-no. 2832<br/>  <br/>  technical details:<br/>  size max. 390 x 310 x 60mm<br/>  size max. 460 x 190 x 60mm<br/>  size min. 125 x 100 x 3mm<br/>  spped max. 8.000 cycles/h.<br/>  <br/>  -available immediately -<br/>  -can be inspect-<br/>  -on stock-; very good PERFECT BINDING LINE KOLBUS RATIOBINDER 2000 KM 472.A

YEAR 2003 - SERIAL-NO. 517

GATHERING MACHINE KOLBUS ZU 840
12 STATIONS BOOK BLOCK FEEDERS WITH SHORT HANDFEEDING STATION
SIGNATURE RECOGNITION SYSTEM AND AUTOMATIC SECTION THICKNESS CONTROL ATC
CONNECTION UNIT AS TRANSFER CHANNEL TO THE BINDER - INTEGRATED JOGGING STATION
REJECT UNIT AS 840 TO THE RIGHT
CARD-TIPPER TYPE KI 224 ZU

RATIOBINDER 2000 KM 472.A - 21 CLAMPS
CO-PILOT
MAIN MILLING
HOTMELT SPINE GLUE AND HOTMELT SIDE GLUE
PREMELTER KOLBUS LH 370
NORDSON XNO 920 PUR SPINE GLUING SYSTEM
PILE COVER FEEDER
LAYDOWN DELIVERY

CONVEYORS BELT WITH DROPGATE AMBAFLEX COOLING TOWER(DETAILS ON REQUEST)

SPLITTING SAW KOLBUS METRIS - YEAR 2003 - SERIAL-NO. 817V0010

THREE KNIFE TRIMMER KOLBUS HD 151.P
YEAR 2003 - SERIAL-NO. 622
BOOK INFEED FROM THE RIGHT
AUTOMATED SERVO MOTOR WITH CO-PILOT MAKE-READY

STACKER OMG BLUESTAR - YEAR 2003 - SERIAL-NO. 631

SHRINK-WRAP MACHINE CMC FA-600 BT - YEAR 2003 - SERIAL-NO. 2832

TECHNICAL DETAILS:
SIZE MAX. 390 X 310 X 60MM
SIZE MAX. 460 X 190 X 60MM
SIZE MIN. 125 X 100 X 3MM
SPPED MAX. 8.000 CYCLES/H.

-AVAILABLE IMMEDIATELY -
-CAN BE INSPECT-
-ON STOCK-; VERY GOOD
Vendedor: F1-TRADE GmbH
Año de construcción: usado
Precio: 175.000 €
Ubicación: wrapping style \"envelope \":
min. 15 x 18 x h. 3 mm.
max. 55 x 60 x h. 35 mm.
wrapping style \"portfolio\":
min. 15 x 18 x h. 5 mm.
max. 55 x 60 x h. 35 mm.

project data:
styles: portfolio with external band
wrapping material:
internal: aluminum backed with paper
external: paper banderole
product: small rectangular moulded bar with filling
dimensions, mm 53,6 x 15 x 12,2 h
speed: up to 300 ppm* for each machine
*the speed will be confirmed after evaluation of products and wrapping material

mc1ew automatic wrapping machine, equipped with:
o group for \"envelope style\" wrapping style;
o product infeed belt equipped with capacitive sensors which control the start and stop of the
machine;
o device to evacuate the wrapped products in a vertical position;
o two wrapping material reel-holders with stopping device in case of reel end or wrapping material
breakage;
o optical fibre device to stop the machine in case the wrapping material has not arrived or is not
correctly positioned on the product placed on the elevator;
o automatic lubrication;
o three-phase asynchronous motor, controlled by inverter;
plc managing all the machine functions and the autofeeder when present;
o touch screen display;
o operator guards fully interlocked;
o one instructions manual.

1x mc1ew automatic wrapping machine as described above including one set of change parts for enrobed wafer to be wrapped in portfolio style
1x sheet shifting device
1x print registration device
1x nordson hot melt device for the application of two glue spots
1x horizontal aligner model mca4

incl. guarantee & installation; new .gif" alt="Land-manufacturer: mc automations
type: mc1ew

suitable for wrapping of solid or filled chocolates, including sticks,
nougat, biscuits (coated or uncoated), fondant or similar products.

product dimensions:
wrapping style \"envelope-portfolio\"
wrapping style \"envelope \":
min. 15 x 18 x h. 3 mm.
max. 55 x 60 x h. 35 mm.
wrapping style \"portfolio\":
min. 15 x 18 x h. 5 mm.
max. 55 x 60 x h. 35 mm.

project data:
styles: portfolio with external band
wrapping material:
internal: aluminum backed with paper
external: paper banderole
product: small rectangular moulded bar with filling
dimensions, mm 53,6 x 15 x 12,2 h
speed: up to 300 ppm* for each machine
*the speed will be confirmed after evaluation of products and wrapping material

mc1ew automatic wrapping machine, equipped with:
o group for \"envelope style\" wrapping style;
o product infeed belt equipped with capacitive sensors which control the start and stop of the
machine;
o device to evacuate the wrapped products in a vertical position;
o two wrapping material reel-holders with stopping device in case of reel end or wrapping material
breakage;
o optical fibre device to stop the machine in case the wrapping material has not arrived or is not
correctly positioned on the product placed on the elevator;
o automatic lubrication;
o three-phase asynchronous motor, controlled by inverter;
plc managing all the machine functions and the autofeeder when present;
o touch screen display;
o operator guards fully interlocked;
o one instructions manual.

1x mc1ew automatic wrapping machine as described above including one set of change parts for enrobed wafer to be wrapped in portfolio style
1x sheet shifting device
1x print registration device
1x nordson hot melt device for the application of two glue spots
1x horizontal aligner model mca4

incl. guarantee & installation; new " style="height: 18px;"> MANUFACTURER: MC AUTOMATIONS
TYPE: MC1EW

SUITABLE FOR WRAPPING OF SOLID OR FILLED CHOCOLATES, INCLUDING STICKS,
NOUGAT, BISCUITS (COATED OR UNCOATED), FONDANT OR SIMILAR PRODUCTS.

PRODUCT DIMENSIONS:
WRAPPING STYLE \"ENVELOPE-PORTFOLIO\"
WRAPPING STYLE \"ENVELOPE \":
MIN. 15 X 18 X H. 3 MM.
MAX. 55 X 60 X H. 35 MM.
WRAPPING STYLE \"PORTFOLIO\":
MIN. 15 X 18 X H. 5 MM.
MAX. 55 X 60 X H. 35 MM.

PROJECT DATA:
STYLES: PORTFOLIO WITH EXTERNAL BAND
WRAPPING MATERIAL:
INTERNAL: ALUMINUM BACKED WITH PAPER
EXTERNAL: PAPER BANDEROLE
PRODUCT: SMALL RECTANGULAR MOULDED BAR WITH FILLING
DIMENSIONS, MM 53,6 X 15 X 12,2 H
SPEED: UP TO 300 PPM* FOR EACH MACHINE
*THE SPEED WILL BE CONFIRMED AFTER EVALUATION OF PRODUCTS AND WRAPPING MATERIAL

MC1EW AUTOMATIC WRAPPING MACHINE, EQUIPPED WITH:
O GROUP FOR \"ENVELOPE STYLE\" WRAPPING STYLE;
O PRODUCT INFEED BELT EQUIPPED WITH CAPACITIVE SENSORS WHICH CONTROL THE START AND STOP OF THE
MACHINE;
O DEVICE TO EVACUATE THE WRAPPED PRODUCTS IN A VERTICAL POSITION;
O TWO WRAPPING MATERIAL REEL-HOLDERS WITH STOPPING DEVICE IN CASE OF REEL END OR WRAPPING MATERIAL
BREAKAGE;
O OPTICAL FIBRE DEVICE TO STOP THE MACHINE IN CASE THE WRAPPING MATERIAL HAS NOT ARRIVED OR IS NOT
CORRECTLY POSITIONED ON THE PRODUCT PLACED ON THE ELEVATOR;
O AUTOMATIC LUBRICATION;
O THREE-PHASE ASYNCHRONOUS MOTOR, CONTROLLED BY INVERTER;
PLC MANAGING ALL THE MACHINE FUNCTIONS AND THE AUTOFEEDER WHEN PRESENT;
O TOUCH SCREEN DISPLAY;
O OPERATOR GUARDS FULLY INTERLOCKED;
O ONE INSTRUCTIONS MANUAL.

1X MC1EW AUTOMATIC WRAPPING MACHINE AS DESCRIBED ABOVE INCLUDING ONE SET OF CHANGE PARTS FOR ENROBED WAFER TO BE WRAPPED IN PORTFOLIO STYLE
1X SHEET SHIFTING DEVICE
1X PRINT REGISTRATION DEVICE
1X NORDSON HOT MELT DEVICE FOR THE APPLICATION OF TWO GLUE SPOTS
1X HORIZONTAL ALIGNER MODEL MCA4

INCL. GUARANTEE & INSTALLATION; NEW
Vendedor: Middle East Trading
Año de construcción: usado
Ubicación: Land-can filling line capacity: 60000 cph
can type: 211 202 (0.33 and 0, 5ltr.)
consisting of:

1 can depalletizer meypack dl40 year of manufacturing: 1991
with siemens s5 control

2.complete can conveyor system

3. rinser trans hyssek canjet
year of manufacturing: 1997
adjustable mechanically to 0,5 and 0,33 ltr.

4 filler samonazzi / sasib beverages sacrans 2000
1996 year of manufacturing
with 104 filling valves
blocked with:
ferrum seamer type: f812
year of manufacturing 2000

5.filling height control krones
year of manufacturing: 1998
with x-ray

6 c turner trans hyssek

7 pasteurizer sander hansenyear of manufacturing: 1998
double deck
control upgrade by khs with visualization to siemens s7

8 dating 2 x videojet

9 packaging machine kisters
year of manufacturing: 1991
production: 18 and 24 anubhav on a tray with shrinking with 45
mü foil
nordson glue system
with siemens s7 control

10 package transport

11.palletizer kettner inlet above
year of manufacturing: 1996

12 pallet transport incl. magazine

13 winder haloila

price as is / ex-location

this offer is subject to prior sale.
terms of delivery: exw, unpacked
terms of payment.50% with order; 50% on delivery
time of delivery: as per agreement.

still installed and producing at 60.000 cph
###########################################          CAN FILLING LINE CAPACITY: 60000 CPH CAN TYPE: 211 202 (0.33 AND 0, 5LTR.) CONSISTING OF: 1 CAN DEPALLETIZER MEYPACK DL40 YEAR OF MANUFACTURING: 1991 WITH SIEMENS S5 CONTROL 2.COMPLETE CAN CONVEYOR SYSTEM 3. RINSER TRANS HYSSEK CANJET YEAR OF MANUFACTURING: 1997 ADJUSTABLE MECHANICALLY TO 0,5 AND 0,33 LTR. 4 FILLER SAMONAZZI / SASIB BEVERAGES SACRANS 2000 1996 YEAR OF MANUFACTURING WITH 104 FILLING VALVES BLOCKED WITH: FERRUM SEAMER TYPE: F812 YEAR OF MANUFACTURING 2000 5.FILLING HEIGHT CONTROL KRONES YEAR OF MANUFACTURING: 1998 WITH X-RAY 6 C TURNER TRANS HYSSEK 7 PASTEURIZER SANDER HANSENYEAR OF MANUFACTURING: 1998 DOUBLE DECK CONTROL UPGRADE BY KHS WITH VISUALIZATION TO SIEMENS S7 8 DATING 2 X VIDEOJET 9 PACKAGING MACHINE KISTERS YEAR OF MANUFACTURING: 1991 PRODUCTION: 18 AND 24 ANUBHAV ON A TRAY WITH SHRINKING WITH 45 Mü FOIL NORDSON GLUE SYSTEM WITH SIEMENS S7 CONTROL 10 PACKAGE TRANSPORT 11.PALLETIZER KETTNER INLET ABOVE YEAR OF MANUFACTURING: 1996 12 PALLET TRANSPORT INCL. MAGAZINE 13 WINDER HALOILA PRICE AS IS / EX-LOCATION THIS OFFER IS SUBJECT TO PRIOR SALE. TERMS OF DELIVERY: EXW, UNPACKED TERMS OF PAYMENT.50% WITH ORDER; 50% ON DELIVERY TIME OF DELIVERY: AS PER AGREEMENT. STILL INSTALLED AND PRODUCING AT 60.000 CPH ###########################################
Vendedor: Primaplast
Año de construcción: usado
Ubicación: Land-max. output: 120cycle/min, including adhesive melter nordson problue 4 and three different formats.  MAX. OUTPUT: 120CYCLE/MIN, INCLUDING ADHESIVE MELTER NORDSON PROBLUE 4 AND THREE DIFFERENT FORMATS.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-single clamp perfect pur-binder c.b. bourg bb 3002 <br/>  <br/>  cp bourg bb 3002 pur-c single clamp solo pur binder<br/>  <br/>  built 2009<br/>  <br/>  counter only 134.541 books<br/>  <br/>   <br/>  <br/>  single clamp solo pur binder designed for the digital book-on-demand market with operation by one person.<br/>  <br/>  computerised set-up with icon based touch-screen for automatic setting of clamp book thickness and<br/>  <br/>  cover scoring. with 20 programmes for common format job storage<br/>  <br/>  features;<br/>  <br/>      totally automated binder<br/>      auto. book thickness<br/>      auto. glue cut off setting<br/>      nordson versapail vpo 20 pur pre-melt unit (2 new nozzles)<br/>      3 cylinder glue tank with side gluing device<br/>      auto. nip guides setting<br/>      auto. cover scoring setting<br/>      up to 13 positive or negative creases<br/>      winged book can be made<br/>      milling & roughing unit with dust bag extraction<br/>      internal vertical stacking tray delivery<br/>  <br/>  including compressor, tools & manuals.<br/>  <br/>  specification:<br/>  book size max: 385 x 320 mm<br/>  book size min: 100 x 100 mm<br/>  cover weight range  :  82 - 300 gsm<br/>  book thickness,  max:  2 - 60mm + cover thickness<br/>  mechanical speed, max: 500 cycles/hr. SINGLE CLAMP PERFECT PUR-BINDER C.B. BOURG BB 3002

CP BOURG BB 3002 PUR-C SINGLE CLAMP SOLO PUR BINDER

BUILT 2009

COUNTER ONLY 134.541 BOOKS



SINGLE CLAMP SOLO PUR BINDER DESIGNED FOR THE DIGITAL BOOK-ON-DEMAND MARKET WITH OPERATION BY ONE PERSON.

COMPUTERISED SET-UP WITH ICON BASED TOUCH-SCREEN FOR AUTOMATIC SETTING OF CLAMP BOOK THICKNESS AND

COVER SCORING. WITH 20 PROGRAMMES FOR COMMON FORMAT JOB STORAGE

FEATURES;

TOTALLY AUTOMATED BINDER
AUTO. BOOK THICKNESS
AUTO. GLUE CUT OFF SETTING
NORDSON VERSAPAIL VPO 20 PUR PRE-MELT UNIT (2 NEW NOZZLES)
3 CYLINDER GLUE TANK WITH SIDE GLUING DEVICE
AUTO. NIP GUIDES SETTING
AUTO. COVER SCORING SETTING
UP TO 13 POSITIVE OR NEGATIVE CREASES
WINGED BOOK CAN BE MADE
MILLING & ROUGHING UNIT WITH DUST BAG EXTRACTION
INTERNAL VERTICAL STACKING TRAY DELIVERY

INCLUDING COMPRESSOR, TOOLS & MANUALS.

SPECIFICATION:
BOOK SIZE MAX: 385 X 320 MM
BOOK SIZE MIN: 100 X 100 MM
COVER WEIGHT RANGE : 82 - 300 GSM
BOOK THICKNESS, MAX: 2 - 60MM + COVER THICKNESS
MECHANICAL SPEED, MAX: 500 CYCLES/HR.
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-max from 915 mm, min. 45 mm, longitudinal seam, folding back, electronic glue oberwerk nordson with 2 applicator heads, washers under glue factory left, vibrator to the investors, primary crusher, right and left, kicker, meter, motorized folding floor facility, small box system, switched-mode press band. overhaul 2018: cleaned, tested, painted and equipped with new feeder and conveyor belts, and new press tapes. MAX FROM 915 MM, MIN. 45 MM, LONGITUDINAL SEAM, FOLDING BACK, ELECTRONIC GLUE OBERWERK NORDSON WITH 2 APPLICATOR HEADS, WASHERS UNDER GLUE FACTORY LEFT, VIBRATOR TO THE INVESTORS, PRIMARY CRUSHER, RIGHT AND LEFT, KICKER, METER, MOTORIZED FOLDING FLOOR FACILITY, SMALL BOX SYSTEM, SWITCHED-MODE PRESS BAND. OVERHAUL 2018: CLEANED, TESTED, PAINTED AND EQUIPPED WITH NEW FEEDER AND CONVEYOR BELTS, AND NEW PRESS TAPES.
Vendedor: Kohler Verpackungstechnik
Año de construcción: usado
Ubicación: Land-cartoning machine for screen calendar calendar pack machine cacal 2<br/>  bj. 1989<br/>  manufacturer packautomatic ennepetal<br/>  <br/>  raw material: gestanzeter corrugated board kartonplano<br/>  <br/>  final product.  stamping packaging gefalltet, manually filled with calendar, glue hot glue (nordson 2 track order)<br/>   and locked for the secure mail or parcel post<br/>  <br/>  the machine is currently set up for the final shipping dimensions 420 x 315 x 10 mm; verry good CARTONING MACHINE FOR SCREEN CALENDAR CALENDAR PACK MACHINE CACAL 2
BJ. 1989
MANUFACTURER PACKAUTOMATIC ENNEPETAL

RAW MATERIAL: GESTANZETER CORRUGATED BOARD KARTONPLANO

FINAL PRODUCT. STAMPING PACKAGING GEFALLTET, MANUALLY FILLED WITH CALENDAR, GLUE HOT GLUE (NORDSON 2 TRACK ORDER)
AND LOCKED FOR THE SECURE MAIL OR PARCEL POST

THE MACHINE IS CURRENTLY SET UP FOR THE FINAL SHIPPING DIMENSIONS 420 X 315 X 10 MM; VERRY GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-nordson 3000 vista melters feature piston-pump technology and a control system that automates many operator functions to enhance productivity.<br/> <br>-iew led displays for actual and setpoint temperatures for quick verification of all heat zones.<br/> <br><br/> <br># locate fault conditions quickly and facilitate servicing using advanced diagnostics.<br/> <br><br/> <br># customize most system settings with easy-to-operate membrane panel.<br/> <br><br/> <br># use password protection to deter unauthorized access.<br/> <br><br/> <br># improve operator safety with cool-touch melter surfaces.<br/> <br><br/> <br># minimize adhesive degradation and lower unit energy consumption during idle periods with reduced-temperature standby mode.<br/> <br><br/> <br># automate daily startup and shutdown with seven-day clock.<br/> <br><br/> <br># achieve superior noise immunity through advanced components and design techniques. melters are fully compliant with european emc heavy industrial requirements.<br/> <br><br/> <br># monitor system ready, fault and warning functions from remote location.<br/> <br><br/> <br># simplify parts inventory and stocking with melter compatibility to existing nordson guns and hoses.; good NORDSON 3000 VISTA MELTERS FEATURE PISTON-PUMP TECHNOLOGY AND A CONTROL SYSTEM THAT AUTOMATES MANY OPERATOR FUNCTIONS TO ENHANCE PRODUCTIVITY.

-IEW LED DISPLAYS FOR ACTUAL AND SETPOINT TEMPERATURES FOR QUICK VERIFICATION OF ALL HEAT ZONES.



# LOCATE FAULT CONDITIONS QUICKLY AND FACILITATE SERVICING USING ADVANCED DIAGNOSTICS.



# CUSTOMIZE MOST SYSTEM SETTINGS WITH EASY-TO-OPERATE MEMBRANE PANEL.



# USE PASSWORD PROTECTION TO DETER UNAUTHORIZED ACCESS.



# IMPROVE OPERATOR SAFETY WITH COOL-TOUCH MELTER SURFACES.



# MINIMIZE ADHESIVE DEGRADATION AND LOWER UNIT ENERGY CONSUMPTION DURING IDLE PERIODS WITH REDUCED-TEMPERATURE STANDBY MODE.



# AUTOMATE DAILY STARTUP AND SHUTDOWN WITH SEVEN-DAY CLOCK.



# ACHIEVE SUPERIOR NOISE IMMUNITY THROUGH ADVANCED COMPONENTS AND DESIGN TECHNIQUES. MELTERS ARE FULLY COMPLIANT WITH EUROPEAN EMC HEAVY INDUSTRIAL REQUIREMENTS.



# MONITOR SYSTEM READY, FAULT AND WARNING FUNCTIONS FROM REMOTE LOCATION.



# SIMPLIFY PARTS INVENTORY AND STOCKING WITH MELTER COMPATIBILITY TO EXISTING NORDSON GUNS AND HOSES.; GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-cartoning machine schaefer & flottmann sfs 374
 
used machine
 
schaefer & flottmann wrap-around packer sfs 374

wrap-around packer for small boxes.
built in 1999, was used for testing purposes only - almost mint condition.
state of the art technical components: siemens s7, sew and hauser motors, festo pneumatics, nordson hotmelt, sick sensors, becker vacuum pump.
this type of machine is still being manufactured almost identically!

floor space: approx. 3.5 x 2.4 meters

current carton sizes are:
2 layers of 4x2 cartons 100x48x48 mm
2 layers of 4x2 cartons 125x65x65mm
conversion to other carton/box sizes or formations should be easy.

box sizes:
98 x 47 x 47mm
125 x 65 x 65 mm
formation: 2 x 4 in two layers

performance: 60 cartons / min.

for detailed description of the machine, please view annexes.  CARTONING MACHINE SCHAEFER & FLOTTMANN SFS 374 USED MACHINE SCHAEFER & FLOTTMANN WRAP-AROUND PACKER SFS 374 WRAP-AROUND PACKER FOR SMALL BOXES. BUILT IN 1999, WAS USED FOR TESTING PURPOSES ONLY - ALMOST MINT CONDITION. STATE OF THE ART TECHNICAL COMPONENTS: SIEMENS S7, SEW AND HAUSER MOTORS, FESTO PNEUMATICS, NORDSON HOTMELT, SICK SENSORS, BECKER VACUUM PUMP. THIS TYPE OF MACHINE IS STILL BEING MANUFACTURED ALMOST IDENTICALLY! FLOOR SPACE: APPROX. 3.5 X 2.4 METERS CURRENT CARTON SIZES ARE: 2 LAYERS OF 4X2 CARTONS 100X48X48 MM 2 LAYERS OF 4X2 CARTONS 125X65X65MM CONVERSION TO OTHER CARTON/BOX SIZES OR FORMATIONS SHOULD BE EASY. BOX SIZES: 98 X 47 X 47MM 125 X 65 X 65 MM FORMATION: 2 X 4 IN TWO LAYERS PERFORMANCE: 60 CARTONS / MIN. FOR DETAILED DESCRIPTION OF THE MACHINE, PLEASE VIEW ANNEXES.
Vendedor: Stolle Verpackungstechnik
Año de construcción: usado
Precio: 490.000 €
Ubicación: Land-ref. f 86gidue xpandyear 2010, 1.unwinder 1,30 m with automatic lift, 2. web guide bst, 3. corona , 4. delam-relam , 5. flexo 1(cold stamping), 6. flexo 2/ screen stork rsi (platform)(cold stamping), 7. cross bar- web turn bar, 8. offset 1 (possible cold stamping)(automatic ink fontaine) , 9. offset 2 (possible cold stamping))(automatic ink fontaine), 10. cross bar- web turn bar, 11. offset 3 (possible cold stamping))(automatic ink fontaine), 12. offset 4 (possible cold stamping))(automatic ink fontaine), 13. offset 5 (cold stamping))(automatic ink fontaine), 14. hot stamping, 15. offset 6 (cold stamping))(automatic ink fontaine), 16. flexo 3(cold stamping), 17. flexo 4(cold stamping), 18. screen stork rsi /flexo 2 (platform)(possible: nordson hotmelt, booklet unit, special system gidue for 12 pages), 19. unit form making peeloffs, 20. die cutting 1, 21. die cutting, 22. re-vision, 23. waste rewinder, 24. die cutting from back side, 25. cutting the web (3 knives) , 26. decuring device, 27. die cutting 3 (rotary for sheeting labels, boxes), 28. sheeter, table for labels and boxes, 29. unwinders/rewinders- 4 units, 30. rewinder 1,30 m , 31. all units has servo engins, 32. all offsets has for each 3 rolls cooling system, 33. all 12 lamps uv has cooling system, gev, 34. flexo forms: 4 x 20   REF. F 86GIDUE XPANDYEAR 2010, 1.UNWINDER 1,30 M WITH AUTOMATIC LIFT, 2. WEB GUIDE BST, 3. CORONA , 4. DELAM-RELAM , 5. FLEXO 1(COLD STAMPING), 6. FLEXO 2/ SCREEN STORK RSI (PLATFORM)(COLD STAMPING), 7. CROSS BAR- WEB TURN BAR, 8. OFFSET 1 (POSSIBLE COLD STAMPING)(AUTOMATIC INK FONTAINE) , 9. OFFSET 2 (POSSIBLE COLD STAMPING))(AUTOMATIC INK FONTAINE), 10. CROSS BAR- WEB TURN BAR, 11. OFFSET 3 (POSSIBLE COLD STAMPING))(AUTOMATIC INK FONTAINE), 12. OFFSET 4 (POSSIBLE COLD STAMPING))(AUTOMATIC INK FONTAINE), 13. OFFSET 5 (COLD STAMPING))(AUTOMATIC INK FONTAINE), 14. HOT STAMPING, 15. OFFSET 6 (COLD STAMPING))(AUTOMATIC INK FONTAINE), 16. FLEXO 3(COLD STAMPING), 17. FLEXO 4(COLD STAMPING), 18. SCREEN STORK RSI /FLEXO 2 (PLATFORM)(POSSIBLE: NORDSON HOTMELT, BOOKLET UNIT, SPECIAL SYSTEM GIDUE FOR 12 PAGES), 19. UNIT FORM MAKING PEELOFFS, 20. DIE CUTTING 1, 21. DIE CUTTING, 22. RE-VISION, 23. WASTE REWINDER, 24. DIE CUTTING FROM BACK SIDE, 25. CUTTING THE WEB (3 KNIVES) , 26. DECURING DEVICE, 27. DIE CUTTING 3 (ROTARY FOR SHEETING LABELS, BOXES), 28. SHEETER, TABLE FOR LABELS AND BOXES, 29. UNWINDERS/REWINDERS- 4 UNITS, 30. REWINDER 1,30 M , 31. ALL UNITS HAS SERVO ENGINS, 32. ALL OFFSETS HAS FOR EACH 3 ROLLS COOLING SYSTEM, 33. ALL 12 LAMPS UV HAS COOLING SYSTEM, GEV, 34. FLEXO FORMS: 4 X 20
Vendedor: TM Machinery
Año de construcción: usado
Ubicación: Land-
holweg rs 21 bag making machine, for flat- and satchel bags, with in-line printer and window unit.

holweg rotosimplex 21,
year of production : 1981
with 4 colors inline printer w&h qms 992, 4 anilox, 4 rubber cylinders.
bag width 70 – 380 mm
gusset depth 12 – 80 mm
bag length 145 – 660 mm
cut length from 160 to 680 mm
max paper width 900 mm, 
max print width 860 mm 
bottom from 13,3 to 18,3 mm ( on this machine also possible for bigger bottom fold ) 
max. speed 800 bags/min.
paper 30 – 125 g/m2
foil window unwinder.
printing format cylinders 41 pcs. (270-1, 290-4, 300-1, 320-3, 350-3, 360-2, 370-1, 400-4, 420-4, 440-3, 470-4, 520-1, 600-4, 640-4, 680-2) 
forming plates 28 pcs. (80,85,90,100,105,110,115,120,130,140,150,155,160,170,175,180,185,190,200,210,220,225,230,240,250,270,300,320)
equipment for 5 sizes of wicket bags: (cut lengths 400,350,450,470, 520) 
cold glue nordson device.
the machine can be seen in running condition.
HOLWEG RS 21 BAG MAKING MACHINE, FOR FLAT- AND SATCHEL BAGS, WITH IN-LINE PRINTER AND WINDOW UNIT. HOLWEG ROTOSIMPLEX 21, YEAR OF PRODUCTION : 1981 WITH 4 COLORS INLINE PRINTER W&H QMS 992, 4 ANILOX, 4 RUBBER CYLINDERS. BAG WIDTH 70 – 380 MM GUSSET DEPTH 12 – 80 MM BAG LENGTH 145 – 660 MM CUT LENGTH FROM 160 TO 680 MM MAX PAPER WIDTH 900 MM, MAX PRINT WIDTH 860 MM BOTTOM FROM 13,3 TO 18,3 MM ( ON THIS MACHINE ALSO POSSIBLE FOR BIGGER BOTTOM FOLD ) MAX. SPEED 800 BAGS/MIN. PAPER 30 – 125 G/M2 FOIL WINDOW UNWINDER. PRINTING FORMAT CYLINDERS 41 PCS. (270-1, 290-4, 300-1, 320-3, 350-3, 360-2, 370-1, 400-4, 420-4, 440-3, 470-4, 520-1, 600-4, 640-4, 680-2) FORMING PLATES 28 PCS. (80,85,90,100,105,110,115,120,130,140,150,155,160,170,175,180,185,190,200,210,220,225,230,240,250,270,300,320) EQUIPMENT FOR 5 SIZES OF WICKET BAGS: (CUT LENGTHS 400,350,450,470, 520) COLD GLUE NORDSON DEVICE. THE MACHINE CAN BE SEEN IN RUNNING CONDITION.
Vendedor: Palm Brokers
Año de construcción: usado
Ubicación: Land-complete khs can filling line in excellent condition for 330ml and 500ml cans.  speed 90,000 cph - 
year: 2002 - installed in 2003


khs	depalletizer ash1 3tp
khs	empty can conveyor
khs	air conveyor
khs	can rinser canjet 8000
khs	filling machine	innofill dvd 
ferrum	seamer	f812
khs	rotofeeder dual lane 70
khs	paramix	cmx36/t45-12
anton 	anton paar analyzer	cobrix 3
filtec 	filling valve monitor	fs-130ss
filtec 	filled can rejector-a1	ft 75
filtec 	filled can rejector-a2	ft 75
khs	full can conveyor
khs	can warmer	k/wisg 42 - 150
videojet 	date coder 1	videojet excel 170i
videojet 	date coder 2	videojet excel 170i
videojet 	date coder 3	videojet excel 170i
videojet 	date coder 4	videojet excel 170i
smi	smi #1 packer-multipack	sk 450 f
smi	smi #2 packer	sk 600 t
smi	smi #3 packer	sk 600 t
nordson 	glue applicator	-
nordson 	glue applicator	-
khs	case conveyor	
khs	palletizer-a1	innopal 
khs	palletizer-a2	innopal 
khs	pallet conveyor	ptr
khs	pallet magazine	-
cimpack 	pallet tag applicator a1 cimpack 300 
cimpack 	pallet tag applicator a2 cimpack 300



rated speed (bph)	90.000 cph
# of valves:    	126
filling temp:   	9-16c
# of seaming heads	12
rpt/sot:        	rpt
packages produced:	330ml,355ml and 500ml
end size:       	202
hotfill capability?	yes
nitrogen dosing?	no
existing packages	355 ml
change parts for:	no
min. mixing ratio	1:4
warmer/tp?:     	(30-35c)
case packer speed	42 /cs/min x 2
case configuration	6 x 4
secondary packaging type:carton tray only
multipack capability?	yes
multipack variants	2x2 & 2x3


for further info visit abc.beveragexchange.co.uk  or email us
           COMPLETE KHS CAN FILLING LINE IN EXCELLENT CONDITION FOR 330ML AND 500ML CANS. SPEED 90,000 CPH - YEAR: 2002 - INSTALLED IN 2003 KHS DEPALLETIZER ASH1 3TP KHS EMPTY CAN CONVEYOR KHS AIR CONVEYOR KHS CAN RINSER CANJET 8000 KHS FILLING MACHINE INNOFILL DVD FERRUM SEAMER F812 KHS ROTOFEEDER DUAL LANE 70 KHS PARAMIX CMX36/T45-12 ANTON ANTON PAAR ANALYZER COBRIX 3 FILTEC FILLING VALVE MONITOR FS-130SS FILTEC FILLED CAN REJECTOR-A1 FT 75 FILTEC FILLED CAN REJECTOR-A2 FT 75 KHS FULL CAN CONVEYOR KHS CAN WARMER K/WISG 42 - 150 VIDEOJET DATE CODER 1 VIDEOJET EXCEL 170I VIDEOJET DATE CODER 2 VIDEOJET EXCEL 170I VIDEOJET DATE CODER 3 VIDEOJET EXCEL 170I VIDEOJET DATE CODER 4 VIDEOJET EXCEL 170I SMI SMI #1 PACKER-MULTIPACK SK 450 F SMI SMI #2 PACKER SK 600 T SMI SMI #3 PACKER SK 600 T NORDSON GLUE APPLICATOR - NORDSON GLUE APPLICATOR - KHS CASE CONVEYOR KHS PALLETIZER-A1 INNOPAL KHS PALLETIZER-A2 INNOPAL KHS PALLET CONVEYOR PTR KHS PALLET MAGAZINE - CIMPACK PALLET TAG APPLICATOR A1 CIMPACK 300 CIMPACK PALLET TAG APPLICATOR A2 CIMPACK 300 RATED SPEED (BPH) 90.000 CPH # OF VALVES: 126 FILLING TEMP: 9-16C # OF SEAMING HEADS 12 RPT/SOT: RPT PACKAGES PRODUCED: 330ML,355ML AND 500ML END SIZE: 202 HOTFILL CAPABILITY? YES NITROGEN DOSING? NO EXISTING PACKAGES 355 ML CHANGE PARTS FOR: NO MIN. MIXING RATIO 1:4 WARMER/TP?: (30-35C) CASE PACKER SPEED 42 /CS/MIN X 2 CASE CONFIGURATION 6 X 4 SECONDARY PACKAGING TYPE:CARTON TRAY ONLY MULTIPACK CAPABILITY? YES MULTIPACK VARIANTS 2X2 & 2X3 FOR FURTHER INFO VISIT ABC.BEVERAGEXCHANGE.CO.UK OR EMAIL US
Vendedor: Pennington (UK) Ltd
Año de construcción: usado
Ubicación: Land-complete can filling line
make: khs
year: 2004/5, installed 2005
capacity: 90.000 cph
can sizes filled on line: 330ml, 355ml and 500ml
khs	depalletizer ash1 3tp
khs	empty can conveyor	
khs	air conveyor	
khs	can rinser canjet 8000
khs	filling machine	innofill dvd 
ferrum	seamer f812
khs	rotofeeder dual lane 70
khs	paramix	cmx36/t45-12
anton  	anton paar analyzer cobrix 3
filtec 	filling valve monitor	fs130ss
filtec 	filled can rejector-b1	ft-70
filtec 	filled can rejector-b2	ft-70
khs	full can conveyor	
khs	can warmer	
videojet 	date coder 5	videojet 170i
videojet 	date coder 6	videojet 170i
videojet 	date coder 7	videojet 170i
marsh 	tray coder marsh unicorn
khs	kister packer	tsp p080 v
nordson 	glue applicator	-
nordson 	glue applicator	-
khs	shrink tunnel	
khs	case conveyor	
khs	palletizer lord 
khs	pallet conveyor	
khs	pallet magazine	
cimpack 	pallet tag applicator	cimpack 300



# of valves	       126
filling temp.	       9-16c
# of seaming heads	12
rpt/sot:        	rpt
packages produced	330ml, 500ml
end size	        202
hotfill capability?	yes
nitrogen dosing?	no
existing packages	355 ml
change parts for:	no
min. mixing ratio	1:4
warmer/tp?	       (45-50c)
case packer speed	75 cs/min
case configuration	6 x 4
secondary packaging type: carton tray only

for further info visit: abc.beveragexchange.co.uk COMPLETE CAN FILLING LINE MAKE: KHS YEAR: 2004/5, INSTALLED 2005 CAPACITY: 90.000 CPH CAN SIZES FILLED ON LINE: 330ML, 355ML AND 500ML KHS DEPALLETIZER ASH1 3TP KHS EMPTY CAN CONVEYOR KHS AIR CONVEYOR KHS CAN RINSER CANJET 8000 KHS FILLING MACHINE INNOFILL DVD FERRUM SEAMER F812 KHS ROTOFEEDER DUAL LANE 70 KHS PARAMIX CMX36/T45-12 ANTON ANTON PAAR ANALYZER COBRIX 3 FILTEC FILLING VALVE MONITOR FS130SS FILTEC FILLED CAN REJECTOR-B1 FT-70 FILTEC FILLED CAN REJECTOR-B2 FT-70 KHS FULL CAN CONVEYOR KHS CAN WARMER VIDEOJET DATE CODER 5 VIDEOJET 170I VIDEOJET DATE CODER 6 VIDEOJET 170I VIDEOJET DATE CODER 7 VIDEOJET 170I MARSH TRAY CODER MARSH UNICORN KHS KISTER PACKER TSP P080 V NORDSON GLUE APPLICATOR - NORDSON GLUE APPLICATOR - KHS SHRINK TUNNEL KHS CASE CONVEYOR KHS PALLETIZER LORD KHS PALLET CONVEYOR KHS PALLET MAGAZINE CIMPACK PALLET TAG APPLICATOR CIMPACK 300 # OF VALVES 126 FILLING TEMP. 9-16C # OF SEAMING HEADS 12 RPT/SOT: RPT PACKAGES PRODUCED 330ML, 500ML END SIZE 202 HOTFILL CAPABILITY? YES NITROGEN DOSING? NO EXISTING PACKAGES 355 ML CHANGE PARTS FOR: NO MIN. MIXING RATIO 1:4 WARMER/TP? (45-50C) CASE PACKER SPEED 75 CS/MIN CASE CONFIGURATION 6 X 4 SECONDARY PACKAGING TYPE: CARTON TRAY ONLY FOR FURTHER INFO VISIT: ABC.BEVERAGEXCHANGE.CO.UK
Vendedor: Pennington (UK) Ltd
Año de construcción: usado
Ubicación: Land-1 of used nordson 24' hose, blue series, 240v / 760w, new 2013. nordson part number 274797. 6 available (subject to remaining unsold).  1 OF USED NORDSON 24' HOSE, BLUE SERIES, 240V / 760W, NEW 2013. NORDSON PART NUMBER 274797. 6 AVAILABLE (SUBJECT TO REMAINING UNSOLD).
Vendedor: ERMI HOLLAND B.V.
Año de construcción: usado
Ubicación: Land-1 of used nordson 16' hose, blue series, 240v / 504w, new 2013. nordson part number 274796. 6 available (subject to remaining unsold).  1 OF USED NORDSON 16' HOSE, BLUE SERIES, 240V / 504W, NEW 2013. NORDSON PART NUMBER 274796. 6 AVAILABLE (SUBJECT TO REMAINING UNSOLD).
Vendedor: ERMI HOLLAND B.V.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more NORDSON types: