7 ofertas

Año de construcción: usado
Ubicación: Land-the norfo beheading machine type 524 is specially developed for beheading salmon and similar types of fish with a total length of 30 to 70 cm. the machine meets the special demands set for beheading of these fish species.

the fish is placed with the gills on the feeding rail of the beheading machine with the belly towards the knives. by adjusting the height of the feeding rails the position of the cut is determined and thus also if the collarbone follows the head or the body. two spiked belts catch the fish and take it through 2 oblique positioned circular knives, which together with an adjustable plate, bends the head backward, and thus makes a perfect wedge-shaped cut, by means of which an optimal yield of the fish is obtained.

depending upon the operator routine the capacity can be up to 40 fish per minute.

all necessary adjustments when changing fish size/species are easily done and without use of tools.

it has a centrally placed emergency stop and a safety bar, which is activated if unexpected situations arise.

when beheading salmon, size 4-5 kg, with the collarbone placed on the body, the yield percentage to be obtained will be 92-93%. to compare this the yield percentage without collarbone will be 90-91%.

dimensions (lxwxh): approximately 900 x 850 x 1950 mm

weight: approximately 150 kg THE NORFO BEHEADING MACHINE TYPE 524 IS SPECIALLY DEVELOPED FOR BEHEADING SALMON AND SIMILAR TYPES OF FISH WITH A TOTAL LENGTH OF 30 TO 70 CM. THE MACHINE MEETS THE SPECIAL DEMANDS SET FOR BEHEADING OF THESE FISH SPECIES. THE FISH IS PLACED WITH THE GILLS ON THE FEEDING RAIL OF THE BEHEADING MACHINE WITH THE BELLY TOWARDS THE KNIVES. BY ADJUSTING THE HEIGHT OF THE FEEDING RAILS THE POSITION OF THE CUT IS DETERMINED AND THUS ALSO IF THE COLLARBONE FOLLOWS THE HEAD OR THE BODY. TWO SPIKED BELTS CATCH THE FISH AND TAKE IT THROUGH 2 OBLIQUE POSITIONED CIRCULAR KNIVES, WHICH TOGETHER WITH AN ADJUSTABLE PLATE, BENDS THE HEAD BACKWARD, AND THUS MAKES A PERFECT WEDGE-SHAPED CUT, BY MEANS OF WHICH AN OPTIMAL YIELD OF THE FISH IS OBTAINED. DEPENDING UPON THE OPERATOR ROUTINE THE CAPACITY CAN BE UP TO 40 FISH PER MINUTE. ALL NECESSARY ADJUSTMENTS WHEN CHANGING FISH SIZE/SPECIES ARE EASILY DONE AND WITHOUT USE OF TOOLS. IT HAS A CENTRALLY PLACED EMERGENCY STOP AND A SAFETY BAR, WHICH IS ACTIVATED IF UNEXPECTED SITUATIONS ARISE. WHEN BEHEADING SALMON, SIZE 4-5 KG, WITH THE COLLARBONE PLACED ON THE BODY, THE YIELD PERCENTAGE TO BE OBTAINED WILL BE 92-93%. TO COMPARE THIS THE YIELD PERCENTAGE WITHOUT COLLARBONE WILL BE 90-91%. DIMENSIONS (LXWXH): APPROXIMATELY 900 X 850 X 1950 MM WEIGHT: APPROXIMATELY 150 KG
Vendedor: Normar Trading
Año de construcción: usado
Ubicación: Land-make: startrite
model: h250 a
condition: used
machine type: other 
location of machine: norfolk, uk 
condition info: very good working condition

machine details
superb working condition automatic startrite h250a bandsaw.

lifts up, feeds bar through to the stop, cuts, repeat.

has a capacity of 280mm round  MAKE: STARTRITE MODEL: H250 A CONDITION: USED MACHINE TYPE: OTHER LOCATION OF MACHINE: NORFOLK, UK CONDITION INFO: VERY GOOD WORKING CONDITION MACHINE DETAILS SUPERB WORKING CONDITION AUTOMATIC STARTRITE H250A BANDSAW. LIFTS UP, FEEDS BAR THROUGH TO THE STOP, CUTS, REPEAT. HAS A CAPACITY OF 280MM ROUND
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land-make: multicam
model: multicam 3000 series cnc waterjet 
year: 2015
condition: used
machine type: other 
location of machine: norfolk uk 
condition info: excellent - hardly used

machine details
machine specifications frame construction

solid steel plate frame construction, stress relieved and precision machined base frame with integral water tank

machine construction

moving gantry design

maximum x axis travel

1524mm (rack and pinion)

maximum y axis travel

3048mm (rack and pinion)

maximum z axis travel

254mm (lead screw)

work surface

4” slat bed

linear rails

35 mm linear bearings in the x and y axes

z screw assembly

the 3000 series water jet utilizes a thk precision ground ball screw guide actuator to provide an ultra-rigid, high-tolerance, low-profile z-axis assembly

linear rack

the 3000 series water jet utilizes linear rack and pinions for machine movement in the x and y axes

drive system

brushless ac servo system with alpha precision planetary gearboxes & teknic’s sst eclipse e750 digital servo drives

gantry

the gantry is engineered for maximum stiffness from 10mm thick aircraft quality aluminium extrusion

gantry supports

the gantry is supported on both ends by precision machined supports fabricated from 1” thick cast aluminium tooling

plate

control system

multicam ez control and ez suite software connection manager, job name server, job editor, and job reporter

maximum continuous work speed

38 m/min

maximum continuous positioning speed

48 m/min

machine voltage

380v/415v 3phase

intensifier voltage

380-415v/3ph/50hz

european systems ce markings  MAKE: MULTICAM MODEL: MULTICAM 3000 SERIES CNC WATERJET YEAR: 2015 CONDITION: USED MACHINE TYPE: OTHER LOCATION OF MACHINE: NORFOLK UK CONDITION INFO: EXCELLENT - HARDLY USED MACHINE DETAILS MACHINE SPECIFICATIONS FRAME CONSTRUCTION SOLID STEEL PLATE FRAME CONSTRUCTION, STRESS RELIEVED AND PRECISION MACHINED BASE FRAME WITH INTEGRAL WATER TANK MACHINE CONSTRUCTION MOVING GANTRY DESIGN MAXIMUM X AXIS TRAVEL 1524MM (RACK AND PINION) MAXIMUM Y AXIS TRAVEL 3048MM (RACK AND PINION) MAXIMUM Z AXIS TRAVEL 254MM (LEAD SCREW) WORK SURFACE 4” SLAT BED LINEAR RAILS 35 MM LINEAR BEARINGS IN THE X AND Y AXES Z SCREW ASSEMBLY THE 3000 SERIES WATER JET UTILIZES A THK PRECISION GROUND BALL SCREW GUIDE ACTUATOR TO PROVIDE AN ULTRA-RIGID, HIGH-TOLERANCE, LOW-PROFILE Z-AXIS ASSEMBLY LINEAR RACK THE 3000 SERIES WATER JET UTILIZES LINEAR RACK AND PINIONS FOR MACHINE MOVEMENT IN THE X AND Y AXES DRIVE SYSTEM BRUSHLESS AC SERVO SYSTEM WITH ALPHA PRECISION PLANETARY GEARBOXES & TEKNIC’S SST ECLIPSE E750 DIGITAL SERVO DRIVES GANTRY THE GANTRY IS ENGINEERED FOR MAXIMUM STIFFNESS FROM 10MM THICK AIRCRAFT QUALITY ALUMINIUM EXTRUSION GANTRY SUPPORTS THE GANTRY IS SUPPORTED ON BOTH ENDS BY PRECISION MACHINED SUPPORTS FABRICATED FROM 1” THICK CAST ALUMINIUM TOOLING PLATE CONTROL SYSTEM MULTICAM EZ CONTROL AND EZ SUITE SOFTWARE CONNECTION MANAGER, JOB NAME SERVER, JOB EDITOR, AND JOB REPORTER MAXIMUM CONTINUOUS WORK SPEED 38 M/MIN MAXIMUM CONTINUOUS POSITIONING SPEED 48 M/MIN MACHINE VOLTAGE 380V/415V 3PHASE INTENSIFIER VOLTAGE 380-415V/3PH/50HZ EUROPEAN SYSTEMS CE MARKINGS
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land-condition: overhauled

v-cut heading machine with hopper

the norfo deheading machine type 524 is specially developed for deheading salmon and similar types of fish with a total length of 30 to 70 cm. the machine meets the special demands set for deheading  of these fish species.

the fish is placed with the gills on the feeding rail of the deheading machine with the belly towards the knives. by adjusting the height of the feeding rails the position of the cut is determined and thus also if the collar bone follows the head or the body. two spiked belts catch the fish and takes it through 2 oblique positioned circular knives, which together with an adjustable plate, bends the head backwards, and thus makes a perfect wedge-shaped cut,  by means of which an optimal yield of the fish is obtained.

depending upon the operator routine the capacity can be up to 40 fish per minute.

all nesessary adjustments  when changing fish size/species are easily done and without use of tools.

it has a centrally placed emergency stop and a safety bar, which is activated if unexpected situations arise.

when deheading salmon, size 4-5 kg, with the collar bone placed on the body, the yield percentage to be obtained will be 92-93%. to compare this the yield percentage without collar bone will be 90-91%.

dimensions: 900 x 850 x 1950 mm

weight: 150 kg

send request CONDITION: OVERHAULED V-CUT HEADING MACHINE WITH HOPPER THE NORFO DEHEADING MACHINE TYPE 524 IS SPECIALLY DEVELOPED FOR DEHEADING SALMON AND SIMILAR TYPES OF FISH WITH A TOTAL LENGTH OF 30 TO 70 CM. THE MACHINE MEETS THE SPECIAL DEMANDS SET FOR DEHEADING OF THESE FISH SPECIES. THE FISH IS PLACED WITH THE GILLS ON THE FEEDING RAIL OF THE DEHEADING MACHINE WITH THE BELLY TOWARDS THE KNIVES. BY ADJUSTING THE HEIGHT OF THE FEEDING RAILS THE POSITION OF THE CUT IS DETERMINED AND THUS ALSO IF THE COLLAR BONE FOLLOWS THE HEAD OR THE BODY. TWO SPIKED BELTS CATCH THE FISH AND TAKES IT THROUGH 2 OBLIQUE POSITIONED CIRCULAR KNIVES, WHICH TOGETHER WITH AN ADJUSTABLE PLATE, BENDS THE HEAD BACKWARDS, AND THUS MAKES A PERFECT WEDGE-SHAPED CUT, BY MEANS OF WHICH AN OPTIMAL YIELD OF THE FISH IS OBTAINED. DEPENDING UPON THE OPERATOR ROUTINE THE CAPACITY CAN BE UP TO 40 FISH PER MINUTE. ALL NESESSARY ADJUSTMENTS WHEN CHANGING FISH SIZE/SPECIES ARE EASILY DONE AND WITHOUT USE OF TOOLS. IT HAS A CENTRALLY PLACED EMERGENCY STOP AND A SAFETY BAR, WHICH IS ACTIVATED IF UNEXPECTED SITUATIONS ARISE. WHEN DEHEADING SALMON, SIZE 4-5 KG, WITH THE COLLAR BONE PLACED ON THE BODY, THE YIELD PERCENTAGE TO BE OBTAINED WILL BE 92-93%. TO COMPARE THIS THE YIELD PERCENTAGE WITHOUT COLLAR BONE WILL BE 90-91%. DIMENSIONS: 900 X 850 X 1950 MM WEIGHT: 150 KG SEND REQUEST
Vendedor: Normar Trading
Año de construcción: usado
Ubicación: Land-norfo b35 portioning machine
this norfo b35 portioning machine cuts products in very accurate portions both weight or size.
once you have set-up in the computer you want 50 gram portions, you place the product on the infeed conveyor belt.
the products is transported underneath the ‘laser and camera system’ so the computer can calculate where the knive has to make the cuts.
the product than moves to the knive where it’s being cut. than the outfeed conveyor belt will take over to move away the product and make clearence for the next product. all this goes very fast so you can have a very high output with a norfo b35.
we are very experienced installing these machines in the fish, poultry and meat processing industry.
scotraco can cover transport, installation and set-up. tell us your demands and we’ll program the computer so you can very easily operate this machine yourselves.

this machine has been checked over and can be installed by us for a guaranteed operational machine.
conveyer speed: 20-400 mm/sec
cutting speed: up to 600 cuts/min
accuracy: 97-98%
max. product size:  250 x 120 x 1000 mm 



scotraco has many more machines available, we deal with meat/ fish processing and packaging machines. visit our profile or website for more information.

overview from our brands;
baader, marel, henkovac, henkelman, polyclip, automac, multivac, vc999, laska, kramer greber, scanvaegt, laska, koppens, cfs, gea, yamato, ishida, multipond, jasa, gks, innotech, boss, cryovac, ishida, busch NORFO B35 PORTIONING MACHINE THIS NORFO B35 PORTIONING MACHINE CUTS PRODUCTS IN VERY ACCURATE PORTIONS BOTH WEIGHT OR SIZE. ONCE YOU HAVE SET-UP IN THE COMPUTER YOU WANT 50 GRAM PORTIONS, YOU PLACE THE PRODUCT ON THE INFEED CONVEYOR BELT. THE PRODUCTS IS TRANSPORTED UNDERNEATH THE ‘LASER AND CAMERA SYSTEM’ SO THE COMPUTER CAN CALCULATE WHERE THE KNIVE HAS TO MAKE THE CUTS. THE PRODUCT THAN MOVES TO THE KNIVE WHERE IT’S BEING CUT. THAN THE OUTFEED CONVEYOR BELT WILL TAKE OVER TO MOVE AWAY THE PRODUCT AND MAKE CLEARENCE FOR THE NEXT PRODUCT. ALL THIS GOES VERY FAST SO YOU CAN HAVE A VERY HIGH OUTPUT WITH A NORFO B35. WE ARE VERY EXPERIENCED INSTALLING THESE MACHINES IN THE FISH, POULTRY AND MEAT PROCESSING INDUSTRY. SCOTRACO CAN COVER TRANSPORT, INSTALLATION AND SET-UP. TELL US YOUR DEMANDS AND WE’LL PROGRAM THE COMPUTER SO YOU CAN VERY EASILY OPERATE THIS MACHINE YOURSELVES. THIS MACHINE HAS BEEN CHECKED OVER AND CAN BE INSTALLED BY US FOR A GUARANTEED OPERATIONAL MACHINE. CONVEYER SPEED: 20-400 MM/SEC CUTTING SPEED: UP TO 600 CUTS/MIN ACCURACY: 97-98% MAX. PRODUCT SIZE: 250 X 120 X 1000 MM SCOTRACO HAS MANY MORE MACHINES AVAILABLE, WE DEAL WITH MEAT/ FISH PROCESSING AND PACKAGING MACHINES. VISIT OUR PROFILE OR WEBSITE FOR MORE INFORMATION. OVERVIEW FROM OUR BRANDS; BAADER, MAREL, HENKOVAC, HENKELMAN, POLYCLIP, AUTOMAC, MULTIVAC, VC999, LASKA, KRAMER GREBER, SCANVAEGT, LASKA, KOPPENS, CFS, GEA, YAMATO, ISHIDA, MULTIPOND, JASA, GKS, INNOTECH, BOSS, CRYOVAC, ISHIDA, BUSCH
Vendedor: Scotraco B.V.
Año de construcción: usado
Ubicación: Land-production year: 2000-2002

condition: restored

designed for slicing fish and beef fillet and whole fish. product placed on the infeed conveyor, moving at speeds of up to 400 mm/sec. reaching laser scanner, a product passes a section measuring. the information received is processed and maps to your requirements in order to get a portion of the desired weight and length. reza section knives move very quickly-the process of slicing into portions of the product is carried out at great speed. at the outlet of the product continues to move through the pipeline, which can be associated with other types of processing equipment such as graders, weighing system, packing machine, private freezing, etc.

cutting angle is adjustable, allowing you to present your product in the most attractive manner.

knives are made in a variety of versions and are selected depending on the product that you want to cut.

use of water, which may damage the product, while reza is not required.

conveyor speed: 20-400 mm/sec

cutting speed: up to 600 cuts/min

memory: up to 84 programs

cutting angle: 45 and 90 degrees

accuracy: 2-3%

product size: max. 250 x 120 x 1000 mm PRODUCTION YEAR: 2000-2002 CONDITION: RESTORED DESIGNED FOR SLICING FISH AND BEEF FILLET AND WHOLE FISH. PRODUCT PLACED ON THE INFEED CONVEYOR, MOVING AT SPEEDS OF UP TO 400 MM/SEC. REACHING LASER SCANNER, A PRODUCT PASSES A SECTION MEASURING. THE INFORMATION RECEIVED IS PROCESSED AND MAPS TO YOUR REQUIREMENTS IN ORDER TO GET A PORTION OF THE DESIRED WEIGHT AND LENGTH. REZA SECTION KNIVES MOVE VERY QUICKLY-THE PROCESS OF SLICING INTO PORTIONS OF THE PRODUCT IS CARRIED OUT AT GREAT SPEED. AT THE OUTLET OF THE PRODUCT CONTINUES TO MOVE THROUGH THE PIPELINE, WHICH CAN BE ASSOCIATED WITH OTHER TYPES OF PROCESSING EQUIPMENT SUCH AS GRADERS, WEIGHING SYSTEM, PACKING MACHINE, PRIVATE FREEZING, ETC. CUTTING ANGLE IS ADJUSTABLE, ALLOWING YOU TO PRESENT YOUR PRODUCT IN THE MOST ATTRACTIVE MANNER. KNIVES ARE MADE IN A VARIETY OF VERSIONS AND ARE SELECTED DEPENDING ON THE PRODUCT THAT YOU WANT TO CUT. USE OF WATER, WHICH MAY DAMAGE THE PRODUCT, WHILE REZA IS NOT REQUIRED. CONVEYOR SPEED: 20-400 MM/SEC CUTTING SPEED: UP TO 600 CUTS/MIN MEMORY: UP TO 84 PROGRAMS CUTTING ANGLE: 45 AND 90 DEGREES ACCURACY: 2-3% PRODUCT SIZE: MAX. 250 X 120 X 1000 MM
Vendedor: Normar Trading
Año de construcción: usado
Precio: 25.000 €
Ubicación: Land-portion cutter norfo b35
man. year: 2000
condition: very good

the machine is used for portioning fish fillets and whole fish. the product is placed on the conveyer, which speeds  up to 400 mm / sec. the position of the laser allows to scan the product  in sections and  measure it at  regular intervals. the information obtained is processed and matched to your requirements in order to receive a portion of (product) of the desired weight and length. this machine can be integrated in the line and connected to the  sorting, packing, weighting and other type of processing  equipment.

cutting angle is adjustable, allowing you to present your product in a more attractive way.knives are made in a variety of versions - depending on the product that you want to cut.

conveyer speed: 20-400 mm/sec

cutting speed: up to  600 cuts/min

memory capacity: up to  84 programms 

cutting angle: 45 to  90 degrees 

accuracy: 97-98%

max. product size:  250 x 120 x 1000 mm    PORTION CUTTER NORFO B35 MAN. YEAR: 2000 CONDITION: VERY GOOD THE MACHINE IS USED FOR PORTIONING FISH FILLETS AND WHOLE FISH. THE PRODUCT IS PLACED ON THE CONVEYER, WHICH SPEEDS UP TO 400 MM / SEC. THE POSITION OF THE LASER ALLOWS TO SCAN THE PRODUCT IN SECTIONS AND MEASURE IT AT REGULAR INTERVALS. THE INFORMATION OBTAINED IS PROCESSED AND MATCHED TO YOUR REQUIREMENTS IN ORDER TO RECEIVE A PORTION OF (PRODUCT) OF THE DESIRED WEIGHT AND LENGTH. THIS MACHINE CAN BE INTEGRATED IN THE LINE AND CONNECTED TO THE SORTING, PACKING, WEIGHTING AND OTHER TYPE OF PROCESSING EQUIPMENT. CUTTING ANGLE IS ADJUSTABLE, ALLOWING YOU TO PRESENT YOUR PRODUCT IN A MORE ATTRACTIVE WAY.KNIVES ARE MADE IN A VARIETY OF VERSIONS - DEPENDING ON THE PRODUCT THAT YOU WANT TO CUT. CONVEYER SPEED: 20-400 MM/SEC CUTTING SPEED: UP TO 600 CUTS/MIN MEMORY CAPACITY: UP TO 84 PROGRAMMS CUTTING ANGLE: 45 TO 90 DEGREES ACCURACY: 97-98% MAX. PRODUCT SIZE: 250 X 120 X 1000 MM
Vendedor: Normar Trading
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more NORFO types: