86 ofertas

Año de construcción: usado
Ubicación: Land-the machine is in good technical condition, by prior arrangement, the opportunity to test. 60-tool magazine, sawdust, embodiment on the side of high pressure coolant 40 bar with changeover contact coolant pressure type a for the helical interpolation sinks (including the b-axis), the functions of programmable notepad dnc dt communications universal interface for a stan gene feeding device synchronization of the main and sub spindle operation c axes - chuck kitagawa b208 with drawbar chuck kitagawa b206 with the train pipe for against pgm. one touch igf advance md instead of standard 3d-me-kit support multiple tools (multi-tool) cooling flush type a for the main spindle rinse chips around the head h1 extractor pieces for the main spindle system of the automatic measurement unit piece (renishaw rmp) machining navi mg - system for self excited oscillation machining navi lg eliminate - a system for self excited vibration anti collision system eliminates automatic bar hoppers, from 6 to 70 mm / 1650 mm, irco (for machines with two spindles) standard specifications: okuma kevyn b 200iiw (against) multi-operational cnc machining center control system osp p300s standard specifications for europe including ce 2-01 prex 11 spindle motor / 7,5 kw (20 min / cont.) from 2 to 02 revolutions per minute spindle speed from 50 to 6000 / min, built-in motor (prex) / 2 / 03 spindle stop plate ã?. 140 mm spindle bore ã?62mm 2-04 c-axis powered, 360 THE MACHINE IS IN GOOD TECHNICAL CONDITION, BY PRIOR ARRANGEMENT, THE OPPORTUNITY TO TEST. 60-TOOL MAGAZINE, SAWDUST, EMBODIMENT ON THE SIDE OF HIGH PRESSURE COOLANT 40 BAR WITH CHANGEOVER CONTACT COOLANT PRESSURE TYPE A FOR THE HELICAL INTERPOLATION SINKS (INCLUDING THE B-AXIS), THE FUNCTIONS OF PROGRAMMABLE NOTEPAD DNC DT COMMUNICATIONS UNIVERSAL INTERFACE FOR A STAN GENE FEEDING DEVICE SYNCHRONIZATION OF THE MAIN AND SUB SPINDLE OPERATION C AXES - CHUCK KITAGAWA B208 WITH DRAWBAR CHUCK KITAGAWA B206 WITH THE TRAIN PIPE FOR AGAINST PGM. ONE TOUCH IGF ADVANCE MD INSTEAD OF STANDARD 3D-ME-KIT SUPPORT MULTIPLE TOOLS (MULTI-TOOL) COOLING FLUSH TYPE A FOR THE MAIN SPINDLE RINSE CHIPS AROUND THE HEAD H1 EXTRACTOR PIECES FOR THE MAIN SPINDLE SYSTEM OF THE AUTOMATIC MEASUREMENT UNIT PIECE (RENISHAW RMP) MACHINING NAVI MG - SYSTEM FOR SELF EXCITED OSCILLATION MACHINING NAVI LG ELIMINATE - A SYSTEM FOR SELF EXCITED VIBRATION ANTI COLLISION SYSTEM ELIMINATES AUTOMATIC BAR HOPPERS, FROM 6 TO 70 MM / 1650 MM, IRCO (FOR MACHINES WITH TWO SPINDLES) STANDARD SPECIFICATIONS: OKUMA KEVYN B 200IIW (AGAINST) MULTI-OPERATIONAL CNC MACHINING CENTER CONTROL SYSTEM OSP P300S STANDARD SPECIFICATIONS FOR EUROPE INCLUDING CE 2-01 PREX 11 SPINDLE MOTOR / 7,5 KW (20 MIN / CONT.) FROM 2 TO 02 REVOLUTIONS PER MINUTE SPINDLE SPEED FROM 50 TO 6000 / MIN, BUILT-IN MOTOR (PREX) / 2 / 03 SPINDLE STOP PLATE Ã?. 140 MM SPINDLE BORE Ã?62MM 2-04 C-AXIS POWERED, 360
Vendedor: CEE-Machines
Año de construcción: usado
Precio: 450 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-table size: 460 x 1000 mm traverse path x/y/z: 762/460/460 mm spindle retainer: mas bt 40 isa kl. / gr. table/spindle distance: 150/610 mm spindle speed: 15000 rpm number of tool positions: 32 pieces spindle drive: 22 kw electr. supply: 400 v kw space: 3100 x 2500 x 2750 mm weight: 7500 kg 
 TABLE SIZE: 460 X 1000 MM TRAVERSE PATH X/Y/Z: 762/460/460 MM SPINDLE RETAINER: MAS BT 40 ISA KL. / GR. TABLE/SPINDLE DISTANCE: 150/610 MM SPINDLE SPEED: 15000 RPM NUMBER OF TOOL POSITIONS: 32 PIECES SPINDLE DRIVE: 22 KW ELECTR. SUPPLY: 400 V KW SPACE: 3100 X 2500 X 2750 MM WEIGHT: 7500 KG
Vendedor: Kurt Steiger Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 650 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-control system: okuma osp-p300s-h	
operating hours: 11543 h	
spindle hours: 1304 h	
working area: 600 x 600 x 750 mm	
main spindle :	
speed range: 50 - 6000 (45 - 5000) rpm	
engine power: 11 / 7.5 (22/15) kw	
spindle connection: 140 flat (jis a2-6)	
spindle bore diameter: 62 mm	
c axis - resolution 0.001	
second spindle :	
speed range: 50 - 6000 rpm	
motor power: 11 / 7.5 kw	
spindle connection: 140 flat	
spindle bore diameter: 62 mm	
milling spindle :	
tool holder type: hsk-a63 (capto c6)	
tool head: number of tools 1	
h1atc design	
max. diameter boring bars: 32 mm	
max. tool diameter: 65 mm	
speed range: 15 - 12000 (20000) rpm	
engine power: 12/8 (9/6) kw	
tool holder: hsk-a63 (capto c6)	
max. tool weight: 4 kg	
max. tool diameter: 90 mm	
max. tool length: 200 mm	
travel distances:	
x: 500 mm	
y: 160 mm	
z: 800 mm	
w: 810 mm	
axis b 225 <-30 + 195> mm	
rapid-axis :	
x: 40 m / min	
y: 26 m / min	
z: 40 m / min	
w: 20 m / min	
c: 200 rpm	
b: 30 rpm	
machine dimensions:	
3925 x 2210 x 2582 mm	
machine weight: 8000 kg	
accessories:	
tool changer positions: 60	
high pressure cooling with pressure change 40 bar	
flushing cooling a-type	
b-axis	
function of programmable notes	
dnc-dt communication	
universal interface for bar loader	
main and spindle synchronization in c-axis mode	
kitagawa b208 three-spoke chuck with drawbar	
kitagawa b206 chuck with counter tube	
pgm. one-touch igf advance m-d instead of the standard 3d m-e kit	
multi-tool support	
flush type a for main spindle	
rinsing chips around head h1	
fan for the main spindle	
automatic cross-linking of the workpiece (renishaw rmp)	
machining navi m-g-system for the elimination of self-bending	
machining navi l-g-system for the elimination of eigenbie vibrations	
anti-collision system	
automatic bar loader breuning irco ils-muk 6-70 mm / 1650 mm.	
 CONTROL SYSTEM: OKUMA OSP-P300S-H OPERATING HOURS: 11543 H SPINDLE HOURS: 1304 H WORKING AREA: 600 X 600 X 750 MM MAIN SPINDLE : SPEED RANGE: 50 - 6000 (45 - 5000) RPM ENGINE POWER: 11 / 7.5 (22/15) KW SPINDLE CONNECTION: 140 FLAT (JIS A2-6) SPINDLE BORE DIAMETER: 62 MM C AXIS - RESOLUTION 0.001 SECOND SPINDLE : SPEED RANGE: 50 - 6000 RPM MOTOR POWER: 11 / 7.5 KW SPINDLE CONNECTION: 140 FLAT SPINDLE BORE DIAMETER: 62 MM MILLING SPINDLE : TOOL HOLDER TYPE: HSK-A63 (CAPTO C6) TOOL HEAD: NUMBER OF TOOLS 1 H1ATC DESIGN MAX. DIAMETER BORING BARS: 32 MM MAX. TOOL DIAMETER: 65 MM SPEED RANGE: 15 - 12000 (20000) RPM ENGINE POWER: 12/8 (9/6) KW TOOL HOLDER: HSK-A63 (CAPTO C6) MAX. TOOL WEIGHT: 4 KG MAX. TOOL DIAMETER: 90 MM MAX. TOOL LENGTH: 200 MM TRAVEL DISTANCES: X: 500 MM Y: 160 MM Z: 800 MM W: 810 MM AXIS B 225 <-30 + 195> MM RAPID-AXIS : X: 40 M / MIN Y: 26 M / MIN Z: 40 M / MIN W: 20 M / MIN C: 200 RPM B: 30 RPM MACHINE DIMENSIONS: 3925 X 2210 X 2582 MM MACHINE WEIGHT: 8000 KG ACCESSORIES: TOOL CHANGER POSITIONS: 60 HIGH PRESSURE COOLING WITH PRESSURE CHANGE 40 BAR FLUSHING COOLING A-TYPE B-AXIS FUNCTION OF PROGRAMMABLE NOTES DNC-DT COMMUNICATION UNIVERSAL INTERFACE FOR BAR LOADER MAIN AND SPINDLE SYNCHRONIZATION IN C-AXIS MODE KITAGAWA B208 THREE-SPOKE CHUCK WITH DRAWBAR KITAGAWA B206 CHUCK WITH COUNTER TUBE PGM. ONE-TOUCH IGF ADVANCE M-D INSTEAD OF THE STANDARD 3D M-E KIT MULTI-TOOL SUPPORT FLUSH TYPE A FOR MAIN SPINDLE RINSING CHIPS AROUND HEAD H1 FAN FOR THE MAIN SPINDLE AUTOMATIC CROSS-LINKING OF THE WORKPIECE (RENISHAW RMP) MACHINING NAVI M-G-SYSTEM FOR THE ELIMINATION OF SELF-BENDING MACHINING NAVI L-G-SYSTEM FOR THE ELIMINATION OF EIGENBIE VIBRATIONS ANTI-COLLISION SYSTEM AUTOMATIC BAR LOADER BREUNING IRCO ILS-MUK 6-70 MM / 1650 MM.
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-feed - x: 0,001 bis 1000.000 mm/u<br/>feedrate - z:  0,001 bis 1000.000 mm/u<br/>spindle diameter: 100 mm<br/>max. turning diameter: 340 mm<br/>spindle turning speed range: 45 bis 4500 u/min<br/>spindle drive motor: 15 / 22 kw<br/>turning speed range:: stufenlos x automatisch 2 <br/>dimensions of the machine ca.: 3305 x 2100 mmxmmxmm<br/>machine height: 1931,6 mm<br/>spindle nose: jis a2-6 <br/>3-jaw chuck: kitagawa b-210 <br/>+ bar feeder<br/>+ chip conveyor<br/>+ driven tools spots<br/><br/>the machine is in a very good condition.<br/>and has lastly worked in private use (hobby workshop.<br/><br/><br/><br/><br/><br/> FEED - X: 0,001 BIS 1000.000 MM/U
FEEDRATE - Z: 0,001 BIS 1000.000 MM/U
SPINDLE DIAMETER: 100 MM
MAX. TURNING DIAMETER: 340 MM
SPINDLE TURNING SPEED RANGE: 45 BIS 4500 U/MIN
SPINDLE DRIVE MOTOR: 15 / 22 KW
TURNING SPEED RANGE:: STUFENLOS X AUTOMATISCH 2
DIMENSIONS OF THE MACHINE CA.: 3305 X 2100 MMXMMXMM
MACHINE HEIGHT: 1931,6 MM
SPINDLE NOSE: JIS A2-6
3-JAW CHUCK: KITAGAWA B-210
+ BAR FEEDER
+ CHIP CONVEYOR
+ DRIVEN TOOLS SPOTS

THE MACHINE IS IN A VERY GOOD CONDITION.
AND HAS LASTLY WORKED IN PRIVATE USE (HOBBY WORKSHOP.





Vendedor: STEINHAND GmbH
Año de construcción: usado
Ubicación: Land-machine type: okuma mf 46va
control: osp p - 200 m year: 2006
spindle rotation: 17540 h

technical data: travel: x-axis: [mm] 762
y-axis: [mm] 560
z-axis: [mm] 460
rapid traverse: (x/y/z) [m/min] 40 / 40 / 32
table size: [mm] 2 x 460 x 760

speed range: 0-8,000 [1/min]
tool locations: [pcs] 20
toolholder: bt 40

more features - chip conveyors mayfran - internal coolant through the spindle (ecc) with high pressure error 15 bar - tool breakage monitoring - dnc dt - connector for connection of dust extraction system - hand shower for workpiece cleaning, printing errors, changes, and z wipe sales reserved MACHINE TYPE: OKUMA MF 46VA CONTROL: OSP P - 200 M YEAR: 2006 SPINDLE ROTATION: 17540 H TECHNICAL DATA: TRAVEL: X-AXIS: [MM] 762 Y-AXIS: [MM] 560 Z-AXIS: [MM] 460 RAPID TRAVERSE: (X/Y/Z) [M/MIN] 40 / 40 / 32 TABLE SIZE: [MM] 2 X 460 X 760 SPEED RANGE: 0-8,000 [1/MIN] TOOL LOCATIONS: [PCS] 20 TOOLHOLDER: BT 40 MORE FEATURES - CHIP CONVEYORS MAYFRAN - INTERNAL COOLANT THROUGH THE SPINDLE (ECC) WITH HIGH PRESSURE ERROR 15 BAR - TOOL BREAKAGE MONITORING - DNC DT - CONNECTOR FOR CONNECTION OF DUST EXTRACTION SYSTEM - HAND SHOWER FOR WORKPIECE CLEANING, PRINTING ERRORS, CHANGES, AND Z WIPE SALES RESERVED
Vendedor: RG-Tools GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 14.000 €
Ubicación: Land-weight approx.: 5500 kg<br/>dimensions (l x w x h) approx.: 2380 x 1800 x 3000 mm<br/>description: x-axis: 762 mm<br>  y-axis: 460 mm<br>  z-axis: 450 mm<br>  spindle speed: 50 - 7.000 rpm<br>  spindle power: 16 kw<br>  tool type: bt 40<br>  table dimensions: 1000 x 460 mm<br>  max. table weight: 500 kg<br>  tool magazine: 32<br>  rapid traverse: 20/20/15 m<br> WEIGHT APPROX.: 5500 KG
DIMENSIONS (L X W X H) APPROX.: 2380 X 1800 X 3000 MM
DESCRIPTION: X-AXIS: 762 MM
Y-AXIS: 460 MM
Z-AXIS: 450 MM
SPINDLE SPEED: 50 - 7.000 RPM
SPINDLE POWER: 16 KW
TOOL TYPE: BT 40
TABLE DIMENSIONS: 1000 X 460 MM
MAX. TABLE WEIGHT: 500 KG
TOOL MAGAZINE: 32
RAPID TRAVERSE: 20/20/15 M
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-second-hand machine of okuma genos m560r-v with cnc rotary axis kitagawa tmx 250b and fully equipped model year: 2014
control: osp - p 300 m-r
power-on hours: 4450 h
spindle run time: 1190 h
cutting time: 660 h technical data type: vertical travel distance x-axis [mm]: 1,050
stroke y-axis [mm]: 560
traverse path z-axis [mm]: 460
main spindle rpm max [rpm]: 15,000
main spindle power maximum [kw]: 22
number of tool magazine places [pc]: 32
table/pallet length x width [mm]: 1.300 x 560
maximum table load [kg]: 900
tool system: bt 40

additional features - workpiece measurement renishaw
-werzeuglaengenvermessung - chip conveyors enomoto - okuma filter system - software-easy modeling - cnc rotary axis kitagawa tmx 250 b with tailstock - 2 tensioner 200 mm jaw width - spindle tool its bore - various toolholders partial tools - tabmatic sm 6 for thread m5 - m18
-renishaw omp 60 reserved all information without guarantee, sale
    SECOND-HAND MACHINE OF OKUMA GENOS M560R-V WITH CNC ROTARY AXIS KITAGAWA TMX 250B AND FULLY EQUIPPED MODEL YEAR: 2014 CONTROL: OSP - P 300 M-R POWER-ON HOURS: 4450 H SPINDLE RUN TIME: 1190 H CUTTING TIME: 660 H TECHNICAL DATA TYPE: VERTICAL TRAVEL DISTANCE X-AXIS [MM]: 1,050 STROKE Y-AXIS [MM]: 560 TRAVERSE PATH Z-AXIS [MM]: 460 MAIN SPINDLE RPM MAX [RPM]: 15,000 MAIN SPINDLE POWER MAXIMUM [KW]: 22 NUMBER OF TOOL MAGAZINE PLACES [PC]: 32 TABLE/PALLET LENGTH X WIDTH [MM]: 1.300 X 560 MAXIMUM TABLE LOAD [KG]: 900 TOOL SYSTEM: BT 40 ADDITIONAL FEATURES - WORKPIECE MEASUREMENT RENISHAW -WERZEUGLAENGENVERMESSUNG - CHIP CONVEYORS ENOMOTO - OKUMA FILTER SYSTEM - SOFTWARE-EASY MODELING - CNC ROTARY AXIS KITAGAWA TMX 250 B WITH TAILSTOCK - 2 TENSIONER 200 MM JAW WIDTH - SPINDLE TOOL ITS BORE - VARIOUS TOOLHOLDERS PARTIAL TOOLS - TABMATIC SM 6 FOR THREAD M5 - M18 -RENISHAW OMP 60 RESERVED ALL INFORMATION WITHOUT GUARANTEE, SALE
Vendedor: RG-Tools GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 710 mm<br/>turning length: max. 1500 mm<br/>control: okuma osp-p200l <br/>turning speeds: max. 2800 u/min<br/>turning speed range - milling: max. 6000 u/min<br/>spindle bore: 110 mm<br/>tool taper: capto c 6 <br/>rapid traverse: 40 m/min<br/>output mainspindle: 30/22 kw<br/>milling spindle drive: 14/10 kw<br/>x-travel: 925 mm<br/>y-travel: 230 mm<br/>z-travel: 2215 mm<br/>b-axis: 0,001 °<br/>c-axis: 0,001 °<br/>machine on: 15500 h<br/>dimensions of the machine ca.: 4.925 x 2.585 x 3,000 m<br/>weight of the machine ca.: 15,0 t<br/>chip conveyor<br/>touch setter<br/>cas system<br/>helical cutting<br/>slant cutting<br/>arc thread cutting<br/>nc tailstock<br/>internal coolant supply + air bubbles through spindle<br/>data interface dnc t1<br/>software for low speed machining<br/>hydraulic three-jaw chuck kitagawa b -215<br/>suction unit 3nine linea<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> TURNING DIAMETER: 710 MM
TURNING LENGTH: MAX. 1500 MM
CONTROL: OKUMA OSP-P200L
TURNING SPEEDS: MAX. 2800 U/MIN
TURNING SPEED RANGE - MILLING: MAX. 6000 U/MIN
SPINDLE BORE: 110 MM
TOOL TAPER: CAPTO C 6
RAPID TRAVERSE: 40 M/MIN
OUTPUT MAINSPINDLE: 30/22 KW
MILLING SPINDLE DRIVE: 14/10 KW
X-TRAVEL: 925 MM
Y-TRAVEL: 230 MM
Z-TRAVEL: 2215 MM
B-AXIS: 0,001 °
C-AXIS: 0,001 °
MACHINE ON: 15500 H
DIMENSIONS OF THE MACHINE CA.: 4.925 X 2.585 X 3,000 M
WEIGHT OF THE MACHINE CA.: 15,0 T
CHIP CONVEYOR
TOUCH SETTER
CAS SYSTEM
HELICAL CUTTING
SLANT CUTTING
ARC THREAD CUTTING
NC TAILSTOCK
INTERNAL COOLANT SUPPLY + AIR BUBBLES THROUGH SPINDLE
DATA INTERFACE DNC T1
SOFTWARE FOR LOW SPEED MACHINING
HYDRAULIC THREE-JAW CHUCK KITAGAWA B -215
SUCTION UNIT 3NINE LINEA



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-cnc machining centre of okuma genos m560r-v
construction year: 2014
control: osp - p 300 m-r
spindle run time: 650 h

technical data type: vertical travel distance x-axis [mm]: 1,050
stroke y-axis [mm]: 560
traverse path z-axis [mm]: 460
main spindle rpm max [rpm]: 15,000
main spindle power maximum [kw]: 22
number of tool magazine places [pc]: 32
table/pallet length x width [mm]: 1.300 x 560
maximum table load [kg]: 900
tool system: bt 40

additional features - workpiece measurement renishaw
-werzeuglaengenvermessung - chip conveyors enomoto - okuma filter system reserved all information without guarantee, sale
   CNC MACHINING CENTRE OF OKUMA GENOS M560R-V CONSTRUCTION YEAR: 2014 CONTROL: OSP - P 300 M-R SPINDLE RUN TIME: 650 H TECHNICAL DATA TYPE: VERTICAL TRAVEL DISTANCE X-AXIS [MM]: 1,050 STROKE Y-AXIS [MM]: 560 TRAVERSE PATH Z-AXIS [MM]: 460 MAIN SPINDLE RPM MAX [RPM]: 15,000 MAIN SPINDLE POWER MAXIMUM [KW]: 22 NUMBER OF TOOL MAGAZINE PLACES [PC]: 32 TABLE/PALLET LENGTH X WIDTH [MM]: 1.300 X 560 MAXIMUM TABLE LOAD [KG]: 900 TOOL SYSTEM: BT 40 ADDITIONAL FEATURES - WORKPIECE MEASUREMENT RENISHAW -WERZEUGLAENGENVERMESSUNG - CHIP CONVEYORS ENOMOTO - OKUMA FILTER SYSTEM RESERVED ALL INFORMATION WITHOUT GUARANTEE, SALE
Vendedor: RG-Tools GmbH
Año de construcción: usado
Ubicación: Land-technical details::  <br/>:  <br/>x-travel: 1.400 mm<br/>y-travel: 1.250 mm<br/>z-travel: 1.250 mm<br/>control: osp e 100 m <br/>:  <br/>main spindle::  <br/>:  <br/>turning speed range - main spindle: 50 - 6.000 min/-1<br/>power capacity - main spindel: 30 / 22 kw<br/>max. torque: 606 nm<br/>transmission ratio: 2 <br/>tool taper: bt 50 <br/>spindle bearing diameter: 100 mm<br/>:  <br/>pallet changer::  <br/>:  <br/>numbers of pallets: 2 <br/>size of pallet: 800 x 800 mm<br/>change time of pallets: 15,0 sec<br/>max. palett load: 2.000 kg<br/>b - axis: 0,001 °<br/>:  <br/>working area::  <br/>:  <br/>distance spindlenose and center of table: 100 - 1.350 mm<br/>distance spindle center to table: 50 - 1.300 mm<br/>max. workpiecediameter: 1.400 mm<br/>max. workpiece height: 1.450 mm<br/>max. workpiece weight: 2.000 kg<br/>:  <br/>tool magazin::  <br/>:  <br/>number of toolpositions: 240 pos.<br/>tool taper: bt 50 <br/>max. tool diameter: 140 mm<br/>max. tool-dia with free toolbox: 240 mm<br/>max. tool length: 600 mm<br/>max. tool weight: 25,0 kg<br/>change-time tool to tool: 2,0 sec<br/>change-time chip to chip: 5,5 sec<br/>:  <br/>feeds::  <br/>:  <br/>rapid traverse ( x / y / z ): 50 m/min<br/>feed speeds: max. 50.000 mm/min<br/>max. feed power: 14 kn<br/>:  <br/>total power requirement: 60 kva<br/>weight of the machine ca.: 33,6 t<br/>dimensions of the machine ca.: 8,0 x 6,0 x 3,8 m<br/>:  <br/>accessories::  <br/>:  <br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>high pressure coolant: 40 bar <br/>through spindle coolant:  <br/>tool magazine: 240 pos. <br/>pallet changer:  <br/>pallets: 2x <br/>div. tool holder: ca. 500x <br/>elektr. hand wheel:  <br/>direct travel-measuring-system:  <br/>breakage control:  <br/>tool setting:  <br/><br/>cnc - machiningcenter horizontal<br/>okuma - ma 800 hb<br/><br/>- pallet-changer<br/>- 240 tool-magazine-positions<br/>- ca. 500 tool-holder (without tools!)<br/>- without clamping-towers<br/><br/><br/><br/><br/><br/><br/> TECHNICAL DETAILS::
:
X-TRAVEL: 1.400 MM
Y-TRAVEL: 1.250 MM
Z-TRAVEL: 1.250 MM
CONTROL: OSP E 100 M
:
MAIN SPINDLE::
:
TURNING SPEED RANGE - MAIN SPINDLE: 50 - 6.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 30 / 22 KW
MAX. TORQUE: 606 NM
TRANSMISSION RATIO: 2
TOOL TAPER: BT 50
SPINDLE BEARING DIAMETER: 100 MM
:
PALLET CHANGER::
:
NUMBERS OF PALLETS: 2
SIZE OF PALLET: 800 X 800 MM
CHANGE TIME OF PALLETS: 15,0 SEC
MAX. PALETT LOAD: 2.000 KG
B - AXIS: 0,001 °
:
WORKING AREA::
:
DISTANCE SPINDLENOSE AND CENTER OF TABLE: 100 - 1.350 MM
DISTANCE SPINDLE CENTER TO TABLE: 50 - 1.300 MM
MAX. WORKPIECEDIAMETER: 1.400 MM
MAX. WORKPIECE HEIGHT: 1.450 MM
MAX. WORKPIECE WEIGHT: 2.000 KG
:
TOOL MAGAZIN::
:
NUMBER OF TOOLPOSITIONS: 240 POS.
TOOL TAPER: BT 50
MAX. TOOL DIAMETER: 140 MM
MAX. TOOL-DIA WITH FREE TOOLBOX: 240 MM
MAX. TOOL LENGTH: 600 MM
MAX. TOOL WEIGHT: 25,0 KG
CHANGE-TIME TOOL TO TOOL: 2,0 SEC
CHANGE-TIME CHIP TO CHIP: 5,5 SEC
:
FEEDS::
:
RAPID TRAVERSE ( X / Y / Z ): 50 M/MIN
FEED SPEEDS: MAX. 50.000 MM/MIN
MAX. FEED POWER: 14 KN
:
TOTAL POWER REQUIREMENT: 60 KVA
WEIGHT OF THE MACHINE CA.: 33,6 T
DIMENSIONS OF THE MACHINE CA.: 8,0 X 6,0 X 3,8 M
:
ACCESSORIES::
:
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
HIGH PRESSURE COOLANT: 40 BAR
THROUGH SPINDLE COOLANT:
TOOL MAGAZINE: 240 POS.
PALLET CHANGER:
PALLETS: 2X
DIV. TOOL HOLDER: CA. 500X
ELEKTR. HAND WHEEL:
DIRECT TRAVEL-MEASURING-SYSTEM:
BREAKAGE CONTROL:
TOOL SETTING:

CNC - MACHININGCENTER HORIZONTAL
OKUMA - MA 800 HB

- PALLET-CHANGER
- 240 TOOL-MAGAZINE-POSITIONS
- CA. 500 TOOL-HOLDER (WITHOUT TOOLS!)
- WITHOUT CLAMPING-TOWERS






Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-cnc - 4-axis lathe manufacturer: okuma type: lu 25 2 sc 1250
year of construction: 1998
control: osp u 100 l machine is werkstattgeprã¼ft turning length: 1,000 mm
turning diameter: 420 mm
ã? bed: 650 mm
spindle diameter: 120 mm spindle bore: 80 mm speed: 65-3,500 rpm 2 turret: 12 + 10 positions
tool holder (both revolvers): vdi 50 space required
approximately l: 4.65 m b: 2.45 m
weight: 10.000 kg

amenities - tailstock
-conveyors
-feed
-div tool holder.
  CNC - 4-AXIS LATHE MANUFACTURER: OKUMA TYPE: LU 25 2 SC 1250 YEAR OF CONSTRUCTION: 1998 CONTROL: OSP U 100 L MACHINE IS WERKSTATTGEPR&ATILDE;&FRAC14;FT TURNING LENGTH: 1,000 MM TURNING DIAMETER: 420 MM &ATILDE;? BED: 650 MM SPINDLE DIAMETER: 120 MM SPINDLE BORE: 80 MM SPEED: 65-3,500 RPM 2 TURRET: 12 + 10 POSITIONS TOOL HOLDER (BOTH REVOLVERS): VDI 50 SPACE REQUIRED APPROXIMATELY L: 4.65 M B: 2.45 M WEIGHT: 10.000 KG AMENITIES - TAILSTOCK -CONVEYORS -FEED -DIV TOOL HOLDER.
Vendedor: RG-Tools GmbH
Año de construcción: usado
Ubicación: Land-control: osp 5000l-g <br/>greates pass round over bed: 450 mm<br/>turning diameter: 400 mm<br/>turning length: 730 mm<br/>tool turret 12 positions:  <br/>transmission ratio: 4 <br/>chuck: 300 mm<br/>total power requirement: 35 kw<br/>weight of the machine ca.: 10 t<br/>dimensions of the machine ca.: 3890 x 2880 mm<br/>big maschine  450 x 730 mm<br/>2 turret<br/>cnc control osp 5000 l<br/>with out  tailstock<br/><br/><br/><br/> CONTROL: OSP 5000L-G
GREATES PASS ROUND OVER BED: 450 MM
TURNING DIAMETER: 400 MM
TURNING LENGTH: 730 MM
TOOL TURRET 12 POSITIONS:
TRANSMISSION RATIO: 4
CHUCK: 300 MM
TOTAL POWER REQUIREMENT: 35 KW
WEIGHT OF THE MACHINE CA.: 10 T
DIMENSIONS OF THE MACHINE CA.: 3890 X 2880 MM
BIG MASCHINE 450 X 730 MM
2 TURRET
CNC CONTROL OSP 5000 L
WITH OUT TAILSTOCK



Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-1997
2 turrets 12 driven tools
spindle counterspindle
bar passage 42
he has no y-axis
second z-axis turret realized with counterspindle
capacity
max diam of rotation 400 mm
max.diam.tornibile 210 mm
max.lunghezza tornibile 130 mm
axes
stroke xa-xb axis 195 mm
za axis stroke 700 mm
zb axis stroke 730 mm
rapid axes x 15,000 mm / min
rapid axes z 20,000 mm / min
c axis 360.000 °
incremental axes xz from 0.001 to 1.000 mm
asa spindles 6
spindle dx 6000 g. / mm bar passage dia.42.
2 automatic ranges
2 turrets
rpm driven tools u / l 100-6000 g / min
motorized power u / l 2.2 / 1.1 kw
chip conveyor
iemca charger cnc boss 542
government units: osp 7000 l 1997 2 TURRETS 12 DRIVEN TOOLS SPINDLE COUNTERSPINDLE BAR PASSAGE 42 HE HAS NO Y-AXIS SECOND Z-AXIS TURRET REALIZED WITH COUNTERSPINDLE CAPACITY MAX DIAM OF ROTATION 400 MM MAX.DIAM.TORNIBILE 210 MM MAX.LUNGHEZZA TORNIBILE 130 MM AXES STROKE XA-XB AXIS 195 MM ZA AXIS STROKE 700 MM ZB AXIS STROKE 730 MM RAPID AXES X 15,000 MM / MIN RAPID AXES Z 20,000 MM / MIN C AXIS 360.000 ° INCREMENTAL AXES XZ FROM 0.001 TO 1.000 MM ASA SPINDLES 6 SPINDLE DX 6000 G. / MM BAR PASSAGE DIA.42. 2 AUTOMATIC RANGES 2 TURRETS RPM DRIVEN TOOLS U / L 100-6000 G / MIN MOTORIZED POWER U / L 2.2 / 1.1 KW CHIP CONVEYOR IEMCA CHARGER CNC BOSS 542 GOVERNMENT UNITS: OSP 7000 L
Vendedor: Industrialbay
Año de construcción: usado
Ubicación: Land-x-travel: 2000 mm<br/>y-travel: 1600 mm<br/>z-travel: 1100 mm<br/>control: okuma osp 5000m <br/>numbers of pallets: 2 <br/>spindle speeds: 50 - 3600 mm<br/>spindle passage: 100 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> X-TRAVEL: 2000 MM
Y-TRAVEL: 1600 MM
Z-TRAVEL: 1100 MM
CONTROL: OKUMA OSP 5000M
NUMBERS OF PALLETS: 2
SPINDLE SPEEDS: 50 - 3600 MM
SPINDLE PASSAGE: 100 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Precio: 6.950 €
Ubicación: Land-okuma lb 10 control osp 5000 l g cnc
1986.

nominal rotary diameter 150 mm
turning length 250 mm
longitudinal carriage movement = longitudinal travel (z axis) max 285 mm
cross carriage movement plan travel (x-axis) = 150 mm
spindle bore in tensioning tube 36 mm
spindle speed - level 1 60-2500 rpm.
spindle speed - level 2 max 6000 rpm.
turret 12 stations
motor spindle drive approx. 15 kw
power supply 400 volt, 50 hz
-hydraulic hollow clamping fixture with 18 mm clamping hub
-hydraulic tailstock swivel with mk 4 recording
-incl. images (no car) and baking. (see photos)
-chip tray with coolant tank
-central lubrication
dimensions l x w x h 2200 x 2000 x 2000 mm
weight approx. 3.5 ton
ready for use
hydraulic hoses new
pulling cylinders stretches to 10 bar. 


more information and the complete technical data please contact us.
no guarantee or warranty.


 OKUMA LB 10 CONTROL OSP 5000 L G CNC 1986. NOMINAL ROTARY DIAMETER 150 MM TURNING LENGTH 250 MM LONGITUDINAL CARRIAGE MOVEMENT = LONGITUDINAL TRAVEL (Z AXIS) MAX 285 MM CROSS CARRIAGE MOVEMENT PLAN TRAVEL (X-AXIS) = 150 MM SPINDLE BORE IN TENSIONING TUBE 36 MM SPINDLE SPEED - LEVEL 1 60-2500 RPM. SPINDLE SPEED - LEVEL 2 MAX 6000 RPM. TURRET 12 STATIONS MOTOR SPINDLE DRIVE APPROX. 15 KW POWER SUPPLY 400 VOLT, 50 HZ -HYDRAULIC HOLLOW CLAMPING FIXTURE WITH 18 MM CLAMPING HUB -HYDRAULIC TAILSTOCK SWIVEL WITH MK 4 RECORDING -INCL. IMAGES (NO CAR) AND BAKING. (SEE PHOTOS) -CHIP TRAY WITH COOLANT TANK -CENTRAL LUBRICATION DIMENSIONS L X W X H 2200 X 2000 X 2000 MM WEIGHT APPROX. 3.5 TON READY FOR USE HYDRAULIC HOSES NEW PULLING CYLINDERS STRETCHES TO 10 BAR. MORE INFORMATION AND THE COMPLETE TECHNICAL DATA PLEASE CONTACT US. NO GUARANTEE OR WARRANTY.
Vendedor: ZSW Rottschäfer GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 200 mm<br/>turning length: 350 mm<br/>control: osp500 <br/>weight of the machine ca.: 3.5 t<br/><br/><br/><br/><br/> TURNING DIAMETER: 200 MM
TURNING LENGTH: 350 MM
CONTROL: OSP500
WEIGHT OF THE MACHINE CA.: 3.5 T




Vendedor: Hop Machines
Año de construcción: usado
Ubicación: Land-stock number: 3130
various
manufacturer: okuma vac drive unit type a e4809-045-140-1006-1104-55-25

year of construction: 1993

specifications: this model comes from a okuma lt15m good condition 

 STOCK NUMBER: 3130 VARIOUS MANUFACTURER: OKUMA VAC DRIVE UNIT TYPE A E4809-045-140-1006-1104-55-25 YEAR OF CONSTRUCTION: 1993 SPECIFICATIONS: THIS MODEL COMES FROM A OKUMA LT15M GOOD CONDITION
Vendedor: DenTool LTD
Año de construcción: usado
Ubicación: Land-turning diameter: 250 mm<br/>turning length: 500 mm<br/>control: osp 5000 <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>osp 5000 l-g control<br/>12-fold turret head<br/>3-jaw chuck<br/>tailstock<br/>chip tank<br/><br/>technische daten / technical details:<br/>max. umlauf-? über bett / max swing ? over bed    400    mm<br/>max. drehdurchmesser / max. turning diameter    250    mm<br/>max. drehlänge / max. turning length    500    mm<br/>planweg (x) / cross way (x)    125    mm<br/>längsweg (z) / longitudinal way (z)    520    mm<br/>spindelbohrung / spindle hole    56    mm<br/>drehzahlbereich / spindle speed     75-3800    upm /rpm<br/>werkzeugrevolver / turret head    12    fach /holes<br/>reitstockaufnahme / tail stock taper    mk5    <br/>eilgang / rapid feed    12    m/min.<br/>antriebsleistung spindel / drive capacity spindle    7,5    kw<br/>gewicht der maschine ca. / weight    4500    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/> TURNING DIAMETER: 250 MM
TURNING LENGTH: 500 MM
CONTROL: OSP 5000
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
OSP 5000 L-G CONTROL
12-FOLD TURRET HEAD
3-JAW CHUCK
TAILSTOCK
CHIP TANK

TECHNISCHE DATEN / TECHNICAL DETAILS:
MAX. UMLAUF-? üBER BETT / MAX SWING ? OVER BED 400 MM
MAX. DREHDURCHMESSER / MAX. TURNING DIAMETER 250 MM
MAX. DREHLäNGE / MAX. TURNING LENGTH 500 MM
PLANWEG (X) / CROSS WAY (X) 125 MM
LäNGSWEG (Z) / LONGITUDINAL WAY (Z) 520 MM
SPINDELBOHRUNG / SPINDLE HOLE 56 MM
DREHZAHLBEREICH / SPINDLE SPEED 75-3800 UPM /RPM
WERKZEUGREVOLVER / TURRET HEAD 12 FACH /HOLES
REITSTOCKAUFNAHME / TAIL STOCK TAPER MK5
EILGANG / RAPID FEED 12 M/MIN.
ANTRIEBSLEISTUNG SPINDEL / DRIVE CAPACITY SPINDLE 7,5 KW
GEWICHT DER MASCHINE CA. / WEIGHT 4500 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.





Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-stock number: 3131
manufacturer: okuma vacii drive unit type d6-a
type: e4809-045-140-1006-1104-47-05

year of construction: 1993

specifications: this model comes from a okuma lt15m good condition 

 STOCK NUMBER: 3131 MANUFACTURER: OKUMA VACII DRIVE UNIT TYPE D6-A TYPE: E4809-045-140-1006-1104-47-05 YEAR OF CONSTRUCTION: 1993 SPECIFICATIONS: THIS MODEL COMES FROM A OKUMA LT15M GOOD CONDITION
Vendedor: DenTool LTD
Año de construcción: usado
Ubicación: Land-x-travel: 762 mm<br/>y-travel: 460 mm<br/>z-travel: 450 mm<br/>control: okuma osp 700 m <br/>table-size: 1000 x 460 mm<br/>table load: 0,5 t<br/>tool taper: bt 40 <br/>spindle turning speed range: 50 - 7000 u/min<br/>max. torque on the spindle: 95 nm<br/>power capacity - milling spindle: 7,5 kw<br/>rapid traverse: 30 m/min<br/>weight of the machine ca.: 5,7 t<br/>atc (tool changer): 32 pos<br/>coolant equipment: 110 kg<br/>coolant through spindle:  <br/>vertical machining center with the following additional equipment:<br/>vertical column increase<br/>preparation for the 4-axis<br/>enlarged 32-fold tool changer<br/><br/>original spindle hours 11512 in total.<br/><br/>the milling spindle and the main- motor were overhauled in 2014 for<br/>eur 9,682.76.<br/>last service use by the specialist company wmh in december 2017.<br/>thereby the drive board bl-ii-d 75/75 a was repaired.<br/><br/>video: https://youtu.be/pqaoyvhheay<br/><br/><br/><br/><br/> X-TRAVEL: 762 MM
Y-TRAVEL: 460 MM
Z-TRAVEL: 450 MM
CONTROL: OKUMA OSP 700 M
TABLE-SIZE: 1000 X 460 MM
TABLE LOAD: 0,5 T
TOOL TAPER: BT 40
SPINDLE TURNING SPEED RANGE: 50 - 7000 U/MIN
MAX. TORQUE ON THE SPINDLE: 95 NM
POWER CAPACITY - MILLING SPINDLE: 7,5 KW
RAPID TRAVERSE: 30 M/MIN
WEIGHT OF THE MACHINE CA.: 5,7 T
ATC (TOOL CHANGER): 32 POS
COOLANT EQUIPMENT: 110 KG
COOLANT THROUGH SPINDLE:
VERTICAL MACHINING CENTER WITH THE FOLLOWING ADDITIONAL EQUIPMENT:
VERTICAL COLUMN INCREASE
PREPARATION FOR THE 4-AXIS
ENLARGED 32-FOLD TOOL CHANGER

ORIGINAL SPINDLE HOURS 11512 IN TOTAL.

THE MILLING SPINDLE AND THE MAIN- MOTOR WERE OVERHAULED IN 2014 FOR
EUR 9,682.76.
LAST SERVICE USE BY THE SPECIALIST COMPANY WMH IN DECEMBER 2017.
THEREBY THE DRIVE BOARD BL-II-D 75/75 A WAS REPAIRED.

VIDEO: HTTPS://YOUTU.BE/PQAOYVHHEAY




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-overview:
brand: okuma
model: space turn lb250t
application type: turning
machine type: lathe
availability: immediately
construction year: 2001
production hours: 45000
location: czech republic
origin country: japan

general data:
machine weight: 3000 kg

main drive:
number of spindles: 1
spindle speed range: 4500 1/min

control unit:
brand: okuma
model: osp-u100l

movement:
x-axis movement: 180 mm
z-axis movement: 325 mm

turret:
number of turrets: 1

media:
main electronic connection: 220v / 50 hz
power consumption: 24 kva

additional equipment:
chip conveyor
workpiece feeding/storage line


see full technical specifications of this machine at:
abc://bit.ly/2pbtqzq
 OVERVIEW: BRAND: OKUMA MODEL: SPACE TURN LB250T APPLICATION TYPE: TURNING MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2001 PRODUCTION HOURS: 45000 LOCATION: CZECH REPUBLIC ORIGIN COUNTRY: JAPAN GENERAL DATA: MACHINE WEIGHT: 3000 KG MAIN DRIVE: NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 4500 1/MIN CONTROL UNIT: BRAND: OKUMA MODEL: OSP-U100L MOVEMENT: X-AXIS MOVEMENT: 180 MM Z-AXIS MOVEMENT: 325 MM TURRET: NUMBER OF TURRETS: 1 MEDIA: MAIN ELECTRONIC CONNECTION: 220V / 50 HZ POWER CONSUMPTION: 24 KVA ADDITIONAL EQUIPMENT: CHIP CONVEYOR WORKPIECE FEEDING/STORAGE LINE SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2PBTQZQ
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 300 mm<br/>turning length: 325 mm<br/>control: okuma osp-u100l <br/>spindle bore: 62 mm<br/>x-axis: 180 mm<br/>z-axis: 325 mm<br/>turning speeds: 45 - 4500 u/min<br/>rapid traverse: max. 25 m/min<br/>tool turret: vdi 40, 12 x fach<br/>total power requirement: 15 kw<br/>weight of the machine ca.: 3,00 t<br/>chip conveyor:  <br/>hydraulic unit - 44 bar, 30 liter oil tank<br/>part change - portal robot<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> TURNING DIAMETER: 300 MM
TURNING LENGTH: 325 MM
CONTROL: OKUMA OSP-U100L
SPINDLE BORE: 62 MM
X-AXIS: 180 MM
Z-AXIS: 325 MM
TURNING SPEEDS: 45 - 4500 U/MIN
RAPID TRAVERSE: MAX. 25 M/MIN
TOOL TURRET: VDI 40, 12 X FACH
TOTAL POWER REQUIREMENT: 15 KW
WEIGHT OF THE MACHINE CA.: 3,00 T
CHIP CONVEYOR:
HYDRAULIC UNIT - 44 BAR, 30 LITER OIL TANK
PART CHANGE - PORTAL ROBOT



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-overview:
brand: okuma
model: space turn lb250t
application type: turning
machine type: lathe
availability: immediately
construction year: 2001
production hours: 56000
location: czech republic
origin country: japan

general data:
machine weight: 3000 kg

main drive:
number of spindles: 1
spindle speed range: 4500 1/min

control unit:
brand: okuma
model: osp-u100l

movement:
x-axis movement: 180 mm
z-axis movement: 325 mm

turret:
number of turrets: 1

media:
main electronic connection: 220v / 50 hz
power consumption: 24 kva

additional equipment:
chip conveyor
workpiece feeding/storage line



see full technical specifications of this machine at:
abc://bit.ly/2nkv4jd
 OVERVIEW: BRAND: OKUMA MODEL: SPACE TURN LB250T APPLICATION TYPE: TURNING MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2001 PRODUCTION HOURS: 56000 LOCATION: CZECH REPUBLIC ORIGIN COUNTRY: JAPAN GENERAL DATA: MACHINE WEIGHT: 3000 KG MAIN DRIVE: NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 4500 1/MIN CONTROL UNIT: BRAND: OKUMA MODEL: OSP-U100L MOVEMENT: X-AXIS MOVEMENT: 180 MM Z-AXIS MOVEMENT: 325 MM TURRET: NUMBER OF TURRETS: 1 MEDIA: MAIN ELECTRONIC CONNECTION: 220V / 50 HZ POWER CONSUMPTION: 24 KVA ADDITIONAL EQUIPMENT: CHIP CONVEYOR WORKPIECE FEEDING/STORAGE LINE SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2NKV4JD
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-turning diameter:500 mm<br/>turning length:1000 mm<br/>spindle hollow:70 mm<br/>control:osp 7000 <br/>spindle bore:22/15 kw<br/>power capacity:38 - 3800 u/min<br/>turning speed range:20/12/25 m/min<br/>number of tapers in turret head:6,8 kw<br/>power capacity - milling spindle:200 - 6000 u/min<br/>turning speed range - milling:bt 40 <br/>tool taper:20 stück<br/>numbers of tools in magazin:190 mm<br/>tail stock:gegenspindel/ sub spindle <br/>speeds spindle 2:4500 u/min<br/>y-axis min./max.: °<br/>b-axis:5,6 x 2,5 x 2,36 m<br/>dimensions:12,0 t<br/><br/>8- axis turning/ milling centre with milling head and sub spindle.  - milling head with b- axis            - big bore main spindle a2-8                        - sub spindlel                                                                     - b- axis 1°                                                                          - chip conveyor                            - touch setter - igf \ TURNING DIAMETER:500 MM
TURNING LENGTH:1000 MM
SPINDLE HOLLOW:70 MM
CONTROL:OSP 7000
SPINDLE BORE:22/15 KW
POWER CAPACITY:38 - 3800 U/MIN
TURNING SPEED RANGE:20/12/25 M/MIN
NUMBER OF TAPERS IN TURRET HEAD:6,8 KW
POWER CAPACITY - MILLING SPINDLE:200 - 6000 U/MIN
TURNING SPEED RANGE - MILLING:BT 40
TOOL TAPER:20 STüCK
NUMBERS OF TOOLS IN MAGAZIN:190 MM
TAIL STOCK:GEGENSPINDEL/ SUB SPINDLE
SPEEDS SPINDLE 2:4500 U/MIN
Y-AXIS MIN./MAX.: °
B-AXIS:5,6 X 2,5 X 2,36 M
DIMENSIONS:12,0 T

8- AXIS TURNING/ MILLING CENTRE WITH MILLING HEAD AND SUB SPINDLE. - MILLING HEAD WITH B- AXIS - BIG BORE MAIN SPINDLE A2-8 - SUB SPINDLEL - B- AXIS 1° - CHIP CONVEYOR - TOUCH SETTER - IGF \"ONE TOUCH\" DIALOG PROGRAMMING - 3- JAW CHUCK Ø 260 MM MAIN SPINDLE - 3 JAW CHUCK Ø 170 MM SUB SPINDEL - COOLANT THROUGH THE TOOL WITH FILTER - OIL DUST COLLECTOR
Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-year 2003
cnc osp-u 100 m 
chuck bt 50
rpm 10000
stroke x 1000
race y 800
racing z 810
dimension table rotating pallet 630x630
360 000 locations in continuous
max load capacity 1200 kg
warehouse 60 tools
dimension max work 1000x900
power 30/26 kw
quick 40 m / min 
pallet changer 2
15 bar through the spindle
tool probe break
convogliatore chips dredging
size car height 3290
floor space 3460x5962
weight 24,000 kg YEAR 2003 CNC OSP-U 100 M CHUCK BT 50 RPM 10000 STROKE X 1000 RACE Y 800 RACING Z 810 DIMENSION TABLE ROTATING PALLET 630X630 360 000 LOCATIONS IN CONTINUOUS MAX LOAD CAPACITY 1200 KG WAREHOUSE 60 TOOLS DIMENSION MAX WORK 1000X900 POWER 30/26 KW QUICK 40 M / MIN PALLET CHANGER 2 15 BAR THROUGH THE SPINDLE TOOL PROBE BREAK CONVOGLIATORE CHIPS DREDGING SIZE CAR HEIGHT 3290 FLOOR SPACE 3460X5962 WEIGHT 24,000 KG
Vendedor: Industrialbay
Año de construcción: usado
Ubicación: Land-turning diameter:210 mm<br/>turning length:130 mm<br/>control: osp 7000 l<br/>number of controlled axis:7 <br/>turning speed range:50 - 4500 u/min<br/>power requirement:11 + 11 kw<br/>rapid speed:15/20 m/min<br/>number of tapers in turret head:12+12 <br/>number of driven tools in turret:12+12 <br/>spindel speed of driven tools:100 - 6000 u/min<br/>spindelpower on driven tool:2,2 kw<br/>tail stock:sub-spindel <br/>weight of the machine ca.:7 t<br/><br/>cnc-lathe with driven tools, sub-spindel and gantry loader equipment:                 - gantry loader ogl 5, Ø 150 x 100 mm, max. 3 kg                 - chipconveyor                        - 1x 4- jaw chuck main spindle, 1x 3- jaw chuck sub spindle                 - stocker 28 stations                 - tool life managment                 - dialog programming one touch igf                 - 2x 8 bar coolant                 - power on: 42.400 h. spindle on 16.000 h                 - some tool holders TURNING DIAMETER:210 MM
TURNING LENGTH:130 MM
CONTROL: OSP 7000 L
NUMBER OF CONTROLLED AXIS:7
TURNING SPEED RANGE:50 - 4500 U/MIN
POWER REQUIREMENT:11 + 11 KW
RAPID SPEED:15/20 M/MIN
NUMBER OF TAPERS IN TURRET HEAD:12+12
NUMBER OF DRIVEN TOOLS IN TURRET:12+12
SPINDEL SPEED OF DRIVEN TOOLS:100 - 6000 U/MIN
SPINDELPOWER ON DRIVEN TOOL:2,2 KW
TAIL STOCK:SUB-SPINDEL
WEIGHT OF THE MACHINE CA.:7 T

CNC-LATHE WITH DRIVEN TOOLS, SUB-SPINDEL AND GANTRY LOADER EQUIPMENT: - GANTRY LOADER OGL 5, Ø 150 X 100 MM, MAX. 3 KG - CHIPCONVEYOR - 1X 4- JAW CHUCK MAIN SPINDLE, 1X 3- JAW CHUCK SUB SPINDLE - STOCKER 28 STATIONS - TOOL LIFE MANAGMENT - DIALOG PROGRAMMING ONE TOUCH IGF - 2X 8 BAR COOLANT - POWER ON: 42.400 H. SPINDLE ON 16.000 H - SOME TOOL HOLDERS
Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-baujahr 1999
überholte maschine  BAUJAHR 1999 üBERHOLTE MASCHINE
Vendedor: Bips Infotech GmbH
Año de construcción: usado
Ubicación: Land-x-travel:1500 mm<br/>y-travel:630 mm<br/>z-travel:610 mm<br/>control:osp 7000 m <br/>table surface area:1530 x 630 mm<br/>rapid traverse:15/13 m/min<br/>table load:1,5 t<br/>turning speed range:10- 5.000 u/min<br/>max. torque on the spindle:1123 nm<br/>power capacity - milling spindle:22/15 kw<br/>no. of tools in the magazine:20 stück<br/>tool taper:mas bt 50 <br/>dimensions:4,65 x 3,8 x 3,26 m<br/>weight:11000 kg<br/><br/>equipment: - 4th axis with own control - internal coolant - full covered. - ext. hand wheel - few tools - boxway system - 2x mech. gear steps X-TRAVEL:1500 MM
Y-TRAVEL:630 MM
Z-TRAVEL:610 MM
CONTROL:OSP 7000 M
TABLE SURFACE AREA:1530 X 630 MM
RAPID TRAVERSE:15/13 M/MIN
TABLE LOAD:1,5 T
TURNING SPEED RANGE:10- 5.000 U/MIN
MAX. TORQUE ON THE SPINDLE:1123 NM
POWER CAPACITY - MILLING SPINDLE:22/15 KW
NO. OF TOOLS IN THE MAGAZINE:20 STüCK
TOOL TAPER:MAS BT 50
DIMENSIONS:4,65 X 3,8 X 3,26 M
WEIGHT:11000 KG

EQUIPMENT: - 4TH AXIS WITH OWN CONTROL - INTERNAL COOLANT - FULL COVERED. - EXT. HAND WHEEL - FEW TOOLS - BOXWAY SYSTEM - 2X MECH. GEAR STEPS
Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: okuma
model: mx55 vb
application type: laser cutting
machine type: milling
availability: immediately
construction year: 2001
production hours: 12457
location: germany
origin country: japan

general data:
measurements width: 3000 mm
measurements depth: 3500 mm
machine height: 3000 mm
machine weight: 7400 kg

main drive:
numer of spindle: 1
spindle speed range: 50-6000 1/min

control unit:
brand: okuma
model: osp u10m

movement:
x-axis movement: 1050 mm
y-axis movement: 560 mm
z-axis movement: 700 mm  OVERVIEW: BRAND: OKUMA MODEL: MX55 VB APPLICATION TYPE: LASER CUTTING MACHINE TYPE: MILLING AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2001 PRODUCTION HOURS: 12457 LOCATION: GERMANY ORIGIN COUNTRY: JAPAN GENERAL DATA: MEASUREMENTS WIDTH: 3000 MM MEASUREMENTS DEPTH: 3500 MM MACHINE HEIGHT: 3000 MM MACHINE WEIGHT: 7400 KG MAIN DRIVE: NUMER OF SPINDLE: 1 SPINDLE SPEED RANGE: 50-6000 1/MIN CONTROL UNIT: BRAND: OKUMA MODEL: OSP U10M MOVEMENT: X-AXIS MOVEMENT: 1050 MM Y-AXIS MOVEMENT: 560 MM Z-AXIS MOVEMENT: 700 MM
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-bushing cut-off<br>diameter range 14 mm<br>number of dies 2<br>number of stations (incl. cut off) 4<br>cutting length 100 mm<br>shaft length under head 90 mm<br>output - pieces/min 100<br><h2><a href= BUSHING CUT-OFF
DIAMETER RANGE 14 MM
NUMBER OF DIES 2
NUMBER OF STATIONS (INCL. CUT OFF) 4
CUTTING LENGTH 100 MM
SHAFT LENGTH UNDER HEAD 90 MM
OUTPUT - PIECES/MIN 100

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-the machine is in good technical condition, by prior arrangement, the opportunity to test. THE MACHINE IS IN GOOD TECHNICAL CONDITION, BY PRIOR ARRANGEMENT, THE OPPORTUNITY TO TEST.
Vendedor: CEE-Machines
Año de construcción: usado
Precio: 1.950 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-overview:
brand: okuma
model: euro center v50
application type: milling
machine type: machining center (vertical)
availability: immediately
construction year: 2007
production hours: 18900
location: croatia
origin country: czech republic

general data:
measurements width: 2800 mm
measurements depth: 2000 mm
measurements height: 3000 mm
machine weight: 4800 kg

main drive:
number of spindle: 1 
spindle speed range: 8000 1/min

control unit:
brand: okuma
model: osp u10m
cnc main language: english

movement:
x-axis movement: 1020 mm
y-axis movement: 510 mm
z-axis movement: 525 mm

workpiece:
workpiece weight: 680 kg

table:
outer length: 1200 mm
outer width: 510 mm

tools:
max weight: 8 kg
max tool diameter: 90/160 mm
max tool length: 300 mm

media:
main electronic connection: 400 v / 50 hz 
power consumption: 23 kva
internal cooling: yes

additional equipment:
1 - 4 axis sw 
2 - chip boxes
3 - kitagawa rotary unit OVERVIEW: BRAND: OKUMA MODEL: EURO CENTER V50 APPLICATION TYPE: MILLING MACHINE TYPE: MACHINING CENTER (VERTICAL) AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2007 PRODUCTION HOURS: 18900 LOCATION: CROATIA ORIGIN COUNTRY: CZECH REPUBLIC GENERAL DATA: MEASUREMENTS WIDTH: 2800 MM MEASUREMENTS DEPTH: 2000 MM MEASUREMENTS HEIGHT: 3000 MM MACHINE WEIGHT: 4800 KG MAIN DRIVE: NUMBER OF SPINDLE: 1 SPINDLE SPEED RANGE: 8000 1/MIN CONTROL UNIT: BRAND: OKUMA MODEL: OSP U10M CNC MAIN LANGUAGE: ENGLISH MOVEMENT: X-AXIS MOVEMENT: 1020 MM Y-AXIS MOVEMENT: 510 MM Z-AXIS MOVEMENT: 525 MM WORKPIECE: WORKPIECE WEIGHT: 680 KG TABLE: OUTER LENGTH: 1200 MM OUTER WIDTH: 510 MM TOOLS: MAX WEIGHT: 8 KG MAX TOOL DIAMETER: 90/160 MM MAX TOOL LENGTH: 300 MM MEDIA: MAIN ELECTRONIC CONNECTION: 400 V / 50 HZ POWER CONSUMPTION: 23 KVA INTERNAL COOLING: YES ADDITIONAL EQUIPMENT: 1 - 4 AXIS SW 2 - CHIP BOXES 3 - KITAGAWA ROTARY UNIT
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-<br>turning diameter: 864 mm<br>turning length: 1000 mm<br>turret positions: 0<br>positions atc: 0  <br>number controlled axis: 0  <br>cnc brand: okuma<br>cnc model: ops <br><p>make   okuma lu 45</p>
<p>type lu 45 - 2 sc</p>
<p>year 1997</p>
<p>okuma lu 45 cnc turning</p>
<p>centre height (mm) swing = 864</p>
<p>center distance (mm) dbc = 1.000</p>
<p>spindle bore</p>
<p>upper 12 tools</p>
<p>lower 10 tools</p>
<p>cnc osp</p>
<p>large tooling package</p>
<p>excellent condition</p>
<p>
TURNING DIAMETER: 864 MM
TURNING LENGTH: 1000 MM
TURRET POSITIONS: 0
POSITIONS ATC: 0  
NUMBER CONTROLLED AXIS: 0  
CNC BRAND: OKUMA
CNC MODEL: OPS

MAKE &NBSP; OKUMA LU 45

TYPE LU 45 - 2 SC

YEAR 1997

OKUMA LU 45 CNC TURNING

CENTRE HEIGHT (MM) SWING = 864

CENTER DISTANCE (MM) DBC = 1.000

SPINDLE BORE

UPPER 12 TOOLS

LOWER 10 TOOLS

CNC OSP

LARGE TOOLING PACKAGE

EXCELLENT CONDITION

Vendedor: Mach4metal
Año de construcción: usado
Precio: 81.000 €
Ubicación: Land-cnc turning and milling center okuma mac turn 250 bearing no 1105-02442 category cnc turning and milling center make okuma type mac turn 250 built in 2004 state second-hand machine control cnc osp v 100 l storage france country of origin japan delivery immediately 
cargo base ex work technical details turning diameter 550 mm turning length 1000 mm control osp v 100 l turning diameter over bed slide 470 tip height 305 mm spindle drive 22 kw spindle speed 5000 rpm chuck diameter 250 mm auger drive 7.5 kw speed  tool 2-6000 rpm feeds - longitudinal and transverse 1-10000 mm / min rapid traverse: longitudinal - + cross 12000 / 18000 mm/min workpieces between centers max 1000 kg overall power requirements 44 kva machine weight 13 tons of space requirement approx. 6.1 x 3.2 x 2.6 m description machine au sgerã¼stet with:

-cn okuma osp v 100 l control for 5-axis
-turning and milling with y-axis, horizontal/vertical
 milling tool recording hsk 63 live
 -44-fach tool changer
 tool measurement with automatic swivel arm

-various tool holder hsk 63
 3 jaw chuck 
  CNC TURNING AND MILLING CENTER OKUMA MAC TURN 250 BEARING NO 1105-02442 CATEGORY CNC TURNING AND MILLING CENTER MAKE OKUMA TYPE MAC TURN 250 BUILT IN 2004 STATE SECOND-HAND MACHINE CONTROL CNC OSP V 100 L STORAGE FRANCE COUNTRY OF ORIGIN JAPAN DELIVERY IMMEDIATELY CARGO BASE EX WORK TECHNICAL DETAILS TURNING DIAMETER 550 MM TURNING LENGTH 1000 MM CONTROL OSP V 100 L TURNING DIAMETER OVER BED SLIDE 470 TIP HEIGHT 305 MM SPINDLE DRIVE 22 KW SPINDLE SPEED 5000 RPM CHUCK DIAMETER 250 MM AUGER DRIVE 7.5 KW SPEED TOOL 2-6000 RPM FEEDS - LONGITUDINAL AND TRANSVERSE 1-10000 MM / MIN RAPID TRAVERSE: LONGITUDINAL - + CROSS 12000 / 18000 MM/MIN WORKPIECES BETWEEN CENTERS MAX 1000 KG OVERALL POWER REQUIREMENTS 44 KVA MACHINE WEIGHT 13 TONS OF SPACE REQUIREMENT APPROX. 6.1 X 3.2 X 2.6 M DESCRIPTION MACHINE AU SGER&ATILDE;&FRAC14;STET WITH: -CN OKUMA OSP V 100 L CONTROL FOR 5-AXIS -TURNING AND MILLING WITH Y-AXIS, HORIZONTAL/VERTICAL MILLING TOOL RECORDING HSK 63 LIVE -44-FACH TOOL CHANGER TOOL MEASUREMENT WITH AUTOMATIC SWIVEL ARM -VARIOUS TOOL HOLDER HSK 63 3 JAW CHUCK
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-<br>turning diameter: 430 mm<br>turning length: 1000 mm<br>turret positions: 12<br>cnc brand: okuma<br>cnc model: osp 5020 l <br><p>make okuma lb 15 ii</p>
<p>type lb 15 ii</p>
<p>year 1992</p>
<p>osp 5020 l</p>
<p>centre height (mm) swing = 430</p>
<p>center distance (mm) dbc = 1.000</p>
<p>spindle bore turret = 12 pos.</p>
<p>cnc = osp 5020 l</p>
<p>chip conveyor !!</p>
<p>
TURNING DIAMETER: 430 MM
TURNING LENGTH: 1000 MM
TURRET POSITIONS: 12
CNC BRAND: OKUMA
CNC MODEL: OSP 5020 L

MAKE OKUMA LB 15 II

TYPE LB 15 II

YEAR 1992

OSP 5020 L

CENTRE HEIGHT (MM) SWING = 430

CENTER DISTANCE (MM) DBC = 1.000

SPINDLE BORE TURRET = 12 POS.

CNC = OSP 5020 L

CHIP CONVEYOR !!

Vendedor: Mach4metal
Año de construcción: usado
Precio: 53.500 €
Ubicación: Land-- control: osp-u100l 
- max. turning diameter: 280 mm 
- turret (12 stations driven) 
- tool holder vdi 40 
- travel range: x= 210, z= 354 mm 
- c-axis 
- max. spindle speed: 4000 1/min 
- max. speed live tools: 4500 1/min 
- workpiece magazine: 20 rackets 
- max. workpiece weight: 20 kg  - CONTROL: OSP-U100L - MAX. TURNING DIAMETER: 280 MM - TURRET (12 STATIONS DRIVEN) - TOOL HOLDER VDI 40 - TRAVEL RANGE: X= 210, Z= 354 MM - C-AXIS - MAX. SPINDLE SPEED: 4000 1/MIN - MAX. SPEED LIVE TOOLS: 4500 1/MIN - WORKPIECE MAGAZINE: 20 RACKETS - MAX. WORKPIECE WEIGHT: 20 KG
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-<br>turning diameter: 400 mm<br>turning length: 400 mm<br>turret positions: 12<br>cnc brand: okuma<br>cnc model: osp 700 l <br><p>make okuma lb 10 ii</p>
<p>type lb 10 ii cnc lathe</p>
<p>year new 1997</p>
<p>okuma lb 10 ii cnc osp 700 l - 2 axis lathe</p>
<p>centre height (mm) swing = 400</p>
<p>center distance (mm) l = 400 mm</p>
<p>spindle bore bore = 50</p>
<p>cnc osp 700 l - 2 axis speeds up to 5.600 rpm turret 12 positions swarf conveyor</p>
<p>
TURNING DIAMETER: 400 MM
TURNING LENGTH: 400 MM
TURRET POSITIONS: 12
CNC BRAND: OKUMA
CNC MODEL: OSP 700 L

MAKE OKUMA LB 10 II

TYPE LB 10 II CNC LATHE

YEAR NEW 1997

OKUMA LB 10 II CNC OSP 700 L - 2 AXIS LATHE

CENTRE HEIGHT (MM) SWING = 400

CENTER DISTANCE (MM) L = 400 MM

SPINDLE BORE BORE = 50

CNC OSP 700 L - 2 AXIS SPEEDS UP TO 5.600 RPM TURRET 12 POSITIONS SWARF CONVEYOR

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-stock number: 3308
cnc lathe
manufacturer: okuma, type: 9 lb
machine no.: 0211.13056 year of production: 1988

specifications: maximum working diameter 150 mm dia.
turning length 220 mm
hole by ziehenrohr 42 mm dia.
main spindle speed range 150-5000 rpm
main motor kw 5,5/3,7 kw
x axis movement 120 mm
z axes 300 mm
turret with 8 stations
control osp 500 fabr.
operating hours stem 12108 hours
hydraulic tailstock.
clamping tongs device.
cooling water system.
tool setter

weight: 4000 kg

STOCK NUMBER: 3308 CNC LATHE MANUFACTURER: OKUMA, TYPE: 9 LB MACHINE NO.: 0211.13056 YEAR OF PRODUCTION: 1988 SPECIFICATIONS: MAXIMUM WORKING DIAMETER 150 MM DIA. TURNING LENGTH 220 MM HOLE BY ZIEHENROHR 42 MM DIA. MAIN SPINDLE SPEED RANGE 150-5000 RPM MAIN MOTOR KW 5,5/3,7 KW X AXIS MOVEMENT 120 MM Z AXES 300 MM TURRET WITH 8 STATIONS CONTROL OSP 500 FABR. OPERATING HOURS STEM 12108 HOURS HYDRAULIC TAILSTOCK. CLAMPING TONGS DEVICE. COOLING WATER SYSTEM. TOOL SETTER WEIGHT: 4000 KG
Vendedor: DenTool LTD
Año de construcción: usado
Ubicación: Land-<br>turning diameter: 0 mm<br>turning length: 1500 mm<br>turret positions: 0<br>positions atc: 12  <br>number controlled axis: 0  <br>cnc brand: okuma<br>cnc model: osp u 100 l <br><p>make okuma lb300m</p>
<p>type space turn lb 300 m</p>
<p>year 1999</p>
<p>okuma lb 300 m osp u 100 l</p>
<p>centre height (mm)swing = 630</p>
<p>center distance (mm)dbc = 1.500</p>
<p>spindle borebore = 60</p>
<p>atc 12 vdi live tooling</p>
<p>osp u 100 l</p>
<p>speeds 4500 rpm</p>
<p>chip conveyor</p>
<p>
TURNING DIAMETER: 0 MM
TURNING LENGTH: 1500 MM
TURRET POSITIONS: 0
POSITIONS ATC: 12  
NUMBER CONTROLLED AXIS: 0  
CNC BRAND: OKUMA
CNC MODEL: OSP U 100 L

MAKE OKUMA LB300M

TYPE SPACE TURN LB 300 M

YEAR 1999

OKUMA LB 300 M OSP U 100 L

CENTRE HEIGHT (MM)SWING = 630

CENTER DISTANCE (MM)DBC = 1.500

SPINDLE BOREBORE = 60

ATC 12 VDI LIVE TOOLING

OSP U 100 L

SPEEDS 4500 RPM

CHIP CONVEYOR

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-okuma lathe model lb 15 ii - mc 1000 / bj. 97 / 1000 x 530 ã? / cnc osp 7000 l / spindle ã? 100 / 12 powered tools / rapid traverse 20,000 mm min. / spindle up to 4,500 rpm / tailstock ã? 90 / spindle hole ã? 52 / last service 2016 (â?¬ 10,000) / good condition
fe.gi.maschinen.sbg.at

okuma lathe model lb 15 ii - mc 1000 / year 97 / 1000 x 530 ã? / cnc osp 7000 l / spindle ã? 100 / 12 driven tools / rapid traverse 20,000 mm. / spindle up to 4,500 rpm. / tailstock ã? 90 / spindle bore ã? 52 / last service 2016 (eur 10,000) / good condition
fe.gi.maschinen.sbg.at OKUMA LATHE MODEL LB 15 II - MC 1000 / BJ. 97 / 1000 X 530 &ATILDE;? / CNC OSP 7000 L / SPINDLE &ATILDE;? 100 / 12 POWERED TOOLS / RAPID TRAVERSE 20,000 MM MIN. / SPINDLE UP TO 4,500 RPM / TAILSTOCK &ATILDE;? 90 / SPINDLE HOLE &ATILDE;? 52 / LAST SERVICE 2016 (&ACIRC;?&NOT; 10,000) / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT OKUMA LATHE MODEL LB 15 II - MC 1000 / YEAR 97 / 1000 X 530 &ATILDE;? / CNC OSP 7000 L / SPINDLE &ATILDE;? 100 / 12 DRIVEN TOOLS / RAPID TRAVERSE 20,000 MM. / SPINDLE UP TO 4,500 RPM. / TAILSTOCK &ATILDE;? 90 / SPINDLE BORE &ATILDE;? 52 / LAST SERVICE 2016 (EUR 10,000) / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-<br>turning diameter: 300 mm<br>turning length: 1000 mm<br>turret positions: 0<br>positions atc: 60  <br>number controlled axis: 0  <br>cnc brand: okuma<br>cnc model: loading robot <br><p>make okuma macturn</p>
<p>type macturn 30 w</p>
<p>year 1999</p>
<p>multi tasking mill turn drilling machine</p>
<p>centre height (mm) swing bed = 300</p>
<p>center distance (mm) length = 1.000</p>
<p>spindle bore atc 60 positions</p>
<p>okuma loading robot full b axis full c axis</p>
<p>
TURNING DIAMETER: 300 MM
TURNING LENGTH: 1000 MM
TURRET POSITIONS: 0
POSITIONS ATC: 60  
NUMBER CONTROLLED AXIS: 0  
CNC BRAND: OKUMA
CNC MODEL: LOADING ROBOT

MAKE OKUMA MACTURN

TYPE MACTURN 30 W

YEAR 1999

MULTI TASKING MILL TURN DRILLING MACHINE

CENTRE HEIGHT (MM) SWING BED = 300

CENTER DISTANCE (MM) LENGTH = 1.000

SPINDLE BORE ATC 60 POSITIONS

OKUMA LOADING ROBOT FULL B AXIS FULL C AXIS

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-x-travel: 1050mm, y-travel: 560mm, z-travel: 450mm, feed rate: 1-20000mm/min, rapid traverse: 36m/min, table dimensions: 1300x560mm, max. table load: 500kg, rotational speed: 50-6000/min, power: 4.5kw, number of tool slots: 20, tool cone: sk 50, max. tool weight: 9kg, center height: 180mm, including chip conveyor, rotary table and 70 tool cones sk 50, length: 2650mm, width: 2290mm, height: 1960mm.  X-TRAVEL: 1050MM, Y-TRAVEL: 560MM, Z-TRAVEL: 450MM, FEED RATE: 1-20000MM/MIN, RAPID TRAVERSE: 36M/MIN, TABLE DIMENSIONS: 1300X560MM, MAX. TABLE LOAD: 500KG, ROTATIONAL SPEED: 50-6000/MIN, POWER: 4.5KW, NUMBER OF TOOL SLOTS: 20, TOOL CONE: SK 50, MAX. TOOL WEIGHT: 9KG, CENTER HEIGHT: 180MM, INCLUDING CHIP CONVEYOR, ROTARY TABLE AND 70 TOOL CONES SK 50, LENGTH: 2650MM, WIDTH: 2290MM, HEIGHT: 1960MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-max workpiece: Ø 1800 mm x h1150 mmrenewed in 2003 MAX WORKPIECE: Ø 1800 MM X H1150 MMRENEWED IN 2003
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-overview:
brand: okuma
model: ma-50ha
application type: milling
machine type: machining center
construction year: 2002
availability: immediately
location: italy
origin country: japan

general data:
measurements width: 4300 mm
measurements depth: 5800 mm
measurements height: 3300 mm

main drive:
number of spindle: 60 

control unit:
brand: okuma
model: osp u 100 m

movement:
x-axis:
movement: 698.5 mm
y-axis:
movement: 800.1 mm
z-axis:
movement: 698.5 mm

media:
main electronic connection: 380 v  

additional equipment:
1 - tools (upon request) OVERVIEW: BRAND: OKUMA MODEL: MA-50HA APPLICATION TYPE: MILLING MACHINE TYPE: MACHINING CENTER CONSTRUCTION YEAR: 2002 AVAILABILITY: IMMEDIATELY LOCATION: ITALY ORIGIN COUNTRY: JAPAN GENERAL DATA: MEASUREMENTS WIDTH: 4300 MM MEASUREMENTS DEPTH: 5800 MM MEASUREMENTS HEIGHT: 3300 MM MAIN DRIVE: NUMBER OF SPINDLE: 60 CONTROL UNIT: BRAND: OKUMA MODEL: OSP U 100 M MOVEMENT: X-AXIS: MOVEMENT: 698.5 MM Y-AXIS: MOVEMENT: 800.1 MM Z-AXIS: MOVEMENT: 698.5 MM MEDIA: MAIN ELECTRONIC CONNECTION: 380 V ADDITIONAL EQUIPMENT: 1 - TOOLS (UPON REQUEST)
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-type of machine: cnc lathe
manufacturer: okuma
model: lt 2000 ex 2t2m big bore control: osp p 200 la year: 2011 _ 1 ibn 07 / 2012
condition: second-hand machine
hours of operation: 1 ply specifications turning diameter over bed: 400 mm
spitz distance: 990 mm
maximum turning diameter: 210 mm main spindle:

spindle bore diameter: 80 mm
spindle speed: 50-5000 rpm
spindle power: 15 / 11 kw against spindle:

spindle bore diameter: 62 mm
spindle speed: 50-6000 rpm
spindle power: 11 / 7,5 kw z axis: travel
za: 400mm
eg: 730mm

rapid traverse: 40,000 mm / min

w-axis: travel 760 mm
rapid traverse: 32,000 mm / min

x-axis: travel 205 mm
rapid traverse: 30,000 mm / min

c-axis: 360-degree increment 0.001

revolver: 2 x 16 werkzeugplaetzeo
driven tool stations: 2 x 16 positions maximum speed of driven wz: 45-6000 rpm

machine weight 10 t

more features - automatic doors pneumotec - interface robot (universal interface)-high pressure pump switching switchable air / emulsion - 2 x high pressure pump brinkmann th 45 / 340 - absoscale xa / xb - absoscale xa / za - measuring probe renishaw rlp 40 with  automitischer zero setting - interface renishaw on b turret - touch setter manual
-8 x m-code - dnc - t1 interface - chip conveyors mayfran mt 10 h 1200
-suction losma darwin type 2000 d TYPE OF MACHINE: CNC LATHE MANUFACTURER: OKUMA MODEL: LT 2000 EX 2T2M BIG BORE CONTROL: OSP P 200 LA YEAR: 2011 _ 1 IBN 07 / 2012 CONDITION: SECOND-HAND MACHINE HOURS OF OPERATION: 1 PLY SPECIFICATIONS TURNING DIAMETER OVER BED: 400 MM SPITZ DISTANCE: 990 MM MAXIMUM TURNING DIAMETER: 210 MM MAIN SPINDLE: SPINDLE BORE DIAMETER: 80 MM SPINDLE SPEED: 50-5000 RPM SPINDLE POWER: 15 / 11 KW AGAINST SPINDLE: SPINDLE BORE DIAMETER: 62 MM SPINDLE SPEED: 50-6000 RPM SPINDLE POWER: 11 / 7,5 KW Z AXIS: TRAVEL ZA: 400MM EG: 730MM RAPID TRAVERSE: 40,000 MM / MIN W-AXIS: TRAVEL 760 MM RAPID TRAVERSE: 32,000 MM / MIN X-AXIS: TRAVEL 205 MM RAPID TRAVERSE: 30,000 MM / MIN C-AXIS: 360-DEGREE INCREMENT 0.001 REVOLVER: 2 X 16 WERKZEUGPLAETZEO DRIVEN TOOL STATIONS: 2 X 16 POSITIONS MAXIMUM SPEED OF DRIVEN WZ: 45-6000 RPM MACHINE WEIGHT 10 T MORE FEATURES - AUTOMATIC DOORS PNEUMOTEC - INTERFACE ROBOT (UNIVERSAL INTERFACE)-HIGH PRESSURE PUMP SWITCHING SWITCHABLE AIR / EMULSION - 2 X HIGH PRESSURE PUMP BRINKMANN TH 45 / 340 - ABSOSCALE XA / XB - ABSOSCALE XA / ZA - MEASURING PROBE RENISHAW RLP 40 WITH AUTOMITISCHER ZERO SETTING - INTERFACE RENISHAW ON B TURRET - TOUCH SETTER MANUAL -8 X M-CODE - DNC - T1 INTERFACE - CHIP CONVEYORS MAYFRAN MT 10 H 1200 -SUCTION LOSMA DARWIN TYPE 2000 D
Vendedor: RG-Tools GmbH
Año de construcción: usado
Ubicación: Land-horizontal twin-spindle cnc latheturning lenght: 230 mm2 spindles: each 18 kwautomatic robotgantry loadingworkpiecestorage with 20 positionschuck: 250 mm+ chipconveyormax swing dia 400 mm HORIZONTAL TWIN-SPINDLE CNC LATHETURNING LENGHT: 230 MM2 SPINDLES: EACH 18 KWAUTOMATIC ROBOTGANTRY LOADINGWORKPIECESTORAGE WITH 20 POSITIONSCHUCK: 250 MM+ CHIPCONVEYORMAX SWING DIA 400 MM
Vendedor: APT International
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)