606 ofertas

Año de construcción: usado
Precio: 5.700 €
Ubicación: Land-continuous drehzahlregelungnot schlagtasterhand turn switch for law linkslaufunterspannungsausloesertischhoehenverstellung on zahnstangebohrtiefenanschlag with feineinstellunganschlusskabel (1.5 m) with cee-steckerbohrschutz with electr. absicherungthermischer duration of overload protection/normalbohrleistung25/30 mmgewindeschneidleistung m20spindelmk iiibohrtiefe125 mmausladung280 mmsaeulendurchmesser110 mmnutzbare table area (b x l) (gradient-dependent) maximum 420 x 340 mmt-nutengroesseanzahl 2 , distance 125 mmabmessung breite13/26drehzahlanzeigeskalabohrtiefenanzeigeskalabohrtiefenanschlagmit feineinstellungtischhoehenverstellungmit zahnstangemotor three-phase 400 v polumschaltbar0, 90/1.45 kwspindeldrehzahlen with transmission, stepless 125-4000 1 /. minspindeldrehzahlen with stub shaft, 2 stufenstufe i 125-2000 1 / minstufe ii 250-4000 1 / less consonant gradation is made through riemenumlegungvorschub including electromagnetic kupplung0, 10/0.16/0.25 mm/umdr.spindel/tisch240-790 mmmaschinen dimensions (w x d x h) 520 x 820 x 1900 mmmaschinen dimension (with vp) (w x d x h) 637 x 1096 x 2120 mmgewicht300 kginklusive drilling package consisting: taper mandrel, chuck, vice and t - groove set. delivery: free house including verpackungnicht the right machine? we do also other afloat products - ask for a quote! * flott base partner *.  CONTINUOUS DREHZAHLREGELUNGNOT SCHLAGTASTERHAND TURN SWITCH FOR LAW LINKSLAUFUNTERSPANNUNGSAUSLOESERTISCHHOEHENVERSTELLUNG ON ZAHNSTANGEBOHRTIEFENANSCHLAG WITH FEINEINSTELLUNGANSCHLUSSKABEL (1.5 M) WITH CEE-STECKERBOHRSCHUTZ WITH ELECTR. ABSICHERUNGTHERMISCHER DURATION OF OVERLOAD PROTECTION/NORMALBOHRLEISTUNG25/30 MMGEWINDESCHNEIDLEISTUNG M20SPINDELMK IIIBOHRTIEFE125 MMAUSLADUNG280 MMSAEULENDURCHMESSER110 MMNUTZBARE TABLE AREA (B X L) (GRADIENT-DEPENDENT) MAXIMUM 420 X 340 MMT-NUTENGROESSEANZAHL 2 , DISTANCE 125 MMABMESSUNG BREITE13/26DREHZAHLANZEIGESKALABOHRTIEFENANZEIGESKALABOHRTIEFENANSCHLAGMIT FEINEINSTELLUNGTISCHHOEHENVERSTELLUNGMIT ZAHNSTANGEMOTOR THREE-PHASE 400 V POLUMSCHALTBAR0, 90/1.45 KWSPINDELDREHZAHLEN WITH TRANSMISSION, STEPLESS 125-4000 1 /. MINSPINDELDREHZAHLEN WITH STUB SHAFT, 2 STUFENSTUFE I 125-2000 1 / MINSTUFE II 250-4000 1 / LESS CONSONANT GRADATION IS MADE THROUGH RIEMENUMLEGUNGVORSCHUB INCLUDING ELECTROMAGNETIC KUPPLUNG0, 10/0.16/0.25 MM/UMDR.SPINDEL/TISCH240-790 MMMASCHINEN DIMENSIONS (W X D X H) 520 X 820 X 1900 MMMASCHINEN DIMENSION (WITH VP) (W X D X H) 637 X 1096 X 2120 MMGEWICHT300 KGINKLUSIVE DRILLING PACKAGE CONSISTING: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. DELIVERY: FREE HOUSE INCLUDING VERPACKUNGNICHT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! * FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-1,3 t.,; power [ps]: 13; gross weight [kg]: 1270; engine: deutz f1l250d 1,3 T.,; POWER [PS]: 13; GROSS WEIGHT [KG]: 1270; ENGINE: DEUTZ F1L250D
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-facilities:
-console table: k
-led position indicator system
-vacuum system 100/140 mâ³/h
-main spindle 15 kw
-c axis with aggregate interface
incl. interface pneumatics and schwenkan-powered c-axis with torque drive
-interface for flex5 aggregate
-plate changer 10-speed
-plate changer 18 x
-drill head 30 spindles: v20/h10 / s360 â°
-power control pc 85 control
-chip conveyor
-tool transfer course

workpiece parameters:

-workpiece length max (all units):
single/pendulum: 4,000 / 1,375 mm
wz diameter. 25 mm
single/pendulum: 4175 / 1550 mm

workpiece width max: (all units) hit front/rear: 1,150 / 1 400 mm
milling (wz diameter 25 mm)
-stroke front / rear: 1,220 * / 1,550 mm
* work-piece thickness of 40 mm

-thickness:
-max 300 mm including clamping device
-up to 60 mm with standard clamp without
constraint for aggregates and extraction

note:
instead of the main spindle cooling by the vacuum pump is cooled via a separate cooler. this result in better cooling properties and less contamination in the coolant.
 FACILITIES: -CONSOLE TABLE: K -LED POSITION INDICATOR SYSTEM -VACUUM SYSTEM 100/140 M³/H -MAIN SPINDLE 15 KW -C AXIS WITH AGGREGATE INTERFACE INCL. INTERFACE PNEUMATICS AND SCHWENKAN-POWERED C-AXIS WITH TORQUE DRIVE -INTERFACE FOR FLEX5 AGGREGATE -PLATE CHANGER 10-SPEED -PLATE CHANGER 18 X -DRILL HEAD 30 SPINDLES: V20/H10 / S360 ° -POWER CONTROL PC 85 CONTROL -CHIP CONVEYOR -TOOL TRANSFER COURSE WORKPIECE PARAMETERS: -WORKPIECE LENGTH MAX (ALL UNITS): SINGLE/PENDULUM: 4,000 / 1,375 MM WZ DIAMETER. 25 MM SINGLE/PENDULUM: 4175 / 1550 MM WORKPIECE WIDTH MAX: (ALL UNITS) HIT FRONT/REAR: 1,150 / 1 400 MM MILLING (WZ DIAMETER 25 MM) -STROKE FRONT / REAR: 1,220 * / 1,550 MM * WORK-PIECE THICKNESS OF 40 MM -THICKNESS: -MAX 300 MM INCLUDING CLAMPING DEVICE -UP TO 60 MM WITH STANDARD CLAMP WITHOUT CONSTRAINT FOR AGGREGATES AND EXTRACTION NOTE: INSTEAD OF THE MAIN SPINDLE COOLING BY THE VACUUM PUMP IS COOLED VIA A SEPARATE COOLER. THIS RESULT IN BETTER COOLING PROPERTIES AND LESS CONTAMINATION IN THE COOLANT.
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-1,3 to.; power [ps]: 13; gross weight [kg]: 1260; engine: deutz f1l210d 1,3 TO.; POWER [PS]: 13; GROSS WEIGHT [KG]: 1260; ENGINE: DEUTZ F1L210D
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-electronically controlled milling and edges in glue, rework and drilling centre to the commission-wise production of furniture parts,
solid wood or similar materials.
prepared for einwechselbares gluing unit.

base machine:
-bed stable heavy-duty compact linear guide system. preloaded gear rack drives and digital ac servo motors in the x - and y-axes
-unit carrier with linear guiding system,
ball screw and digital ac servo motor to the position of the z axis,
travel 535 mm
 
clamping table at baz211/40/k
-clamping table integrated into the machine bed
  a rigid steel construction with
  linear guides in the longitudinal direction to the
  adjustment of the clamping brackets

power control - control:
  
basic equipment:
-remote diagnostics via modem
  billing according a separate remote service contract
  if completed (not included)
-at baz211/40 + 52
  1 water ring vacuum pump with 100 m3/h
  (corresponds to power a 140 m3/h rotary vane vacuum pump) for clamping system
-pneumatic connection r 1/2 inch, 7 bar
-maximum speed:
-60 m/min in x - and y-direction
-30 m/min in z-direction

technical data:
-workpiece length
maximum 4000 mm for single occupancy
1375 mm pendant occupancy
1550 mm pendant occupancy for milling
with water meters diameter. 25 mm
-width of the work piece stop front: (operating side)
-max 1220 mm for milling tool
  diameter 25 mm
-max 1220 mm with glue
-1150 mm max for all units
-width of the work piece stop rear:
  (auxiliary fence table back)
-1350 mm for machining with tool
  diameter 25 mm
-max 1250 mm with glue
-max 1220 mm for all units
-workpiece thickness
-60 mm with standard clamp in use
  gluing unit
-max 300 mm incl. clamping device in use
  as a router
-up to 60 mm with standard clamp without
  constraint for aggregates and extraction
-in the radius milling min. 16 mm or
  2 x radius + 10 mm
-the specified dimensions are not the maximum possible editing values
  to equate per unit â?? see separate
  tables
-minimum size of the workpiece depending on:
  clamping devices, workpiece surface and contour
-working height bottom workpiece 950 mm
-soil conditions must comply with the foundation plan

7.5 kw liquid-cooled main spindle
-for hsk f63 - din 69893
  
spindle return stroke
-allows the use of the drill head with
  form milling tool in the main spindle
-tool length incl. sleeve
  up to 150 mm
  
c-axis with units - electronic interface
-for mounting of the machining and gluing aggregates with integrated pneumatic electrical electronics supply and actuator programming for cnc drawing

laser positioning aid for vacuum clamp

id: 7313 1 times
extra connectors for clamping devices

id: 7011 1 times
sicherheitsabschrankung side panel left + right

id: 7325 1 times
shuttle machining bxxx/30 /...

id: 7301 2 piece
lateral and longitudinal stop bolt

note
as the auxiliary stops right rear

id: 7207 6 pieces
stroke rail for console table b200

note:
to console 1 to 3 and 5 to 7

number: 1 times
extension boom b200
allows you to edit the width of a workpiece
in attack, rear
-1730 mm max for milling tool diameter 25 mm
-max 1600 mm for all units

id: 7450 1 piece
plate changer 18 x instead of 12 x optimat

id: 7403 1 piece
drill head instead of 17 spindles 12 spindles

id: 7515 1 piece
saw / drill unit swiveling f.wz changer
-unlimited swiveling about c-axis

id: 7547 1 piece
corner notching unit for wz changer
unlimited swiveling on c-axis.

id: 7523 1 piece
drilling / milling unit 4-spindle f. wz-changer
unlimited swiveling on c-axis.

id: 7565 1 piece
blow-off nozzle for wz changer by the edge of the workpiece

id: 7617 1 piece
gluing unit 360-degree optimat

id: 7607 1 piece
heiã?luftdã?se for gluing unit 360 degrees

number: 7633 1 piece
7703 before crosscutting station and 1 x roll number: 1 piece
combi-buendigfraes - after cleaning unit f. wz-w.

id: 7721 2 piece
wpl - radius cutter head

id: 7877 7 times
led position display system console 1300-1600 mm ELECTRONICALLY CONTROLLED MILLING AND EDGES IN GLUE, REWORK AND DRILLING CENTRE TO THE COMMISSION-WISE PRODUCTION OF FURNITURE PARTS, SOLID WOOD OR SIMILAR MATERIALS. PREPARED FOR EINWECHSELBARES GLUING UNIT. BASE MACHINE: -BED STABLE HEAVY-DUTY COMPACT LINEAR GUIDE SYSTEM. PRELOADED GEAR RACK DRIVES AND DIGITAL AC SERVO MOTORS IN THE X - AND Y-AXES -UNIT CARRIER WITH LINEAR GUIDING SYSTEM, BALL SCREW AND DIGITAL AC SERVO MOTOR TO THE POSITION OF THE Z AXIS, TRAVEL 535 MM CLAMPING TABLE AT BAZ211/40/K -CLAMPING TABLE INTEGRATED INTO THE MACHINE BED A RIGID STEEL CONSTRUCTION WITH LINEAR GUIDES IN THE LONGITUDINAL DIRECTION TO THE ADJUSTMENT OF THE CLAMPING BRACKETS POWER CONTROL - CONTROL: BASIC EQUIPMENT: -REMOTE DIAGNOSTICS VIA MODEM BILLING ACCORDING A SEPARATE REMOTE SERVICE CONTRACT IF COMPLETED (NOT INCLUDED) -AT BAZ211/40 + 52 1 WATER RING VACUUM PUMP WITH 100 M3/H (CORRESPONDS TO POWER A 140 M3/H ROTARY VANE VACUUM PUMP) FOR CLAMPING SYSTEM -PNEUMATIC CONNECTION R 1/2 INCH, 7 BAR -MAXIMUM SPEED: -60 M/MIN IN X - AND Y-DIRECTION -30 M/MIN IN Z-DIRECTION TECHNICAL DATA: -WORKPIECE LENGTH MAXIMUM 4000 MM FOR SINGLE OCCUPANCY 1375 MM PENDANT OCCUPANCY 1550 MM PENDANT OCCUPANCY FOR MILLING WITH WATER METERS DIAMETER. 25 MM -WIDTH OF THE WORK PIECE STOP FRONT: (OPERATING SIDE) -MAX 1220 MM FOR MILLING TOOL DIAMETER 25 MM -MAX 1220 MM WITH GLUE -1150 MM MAX FOR ALL UNITS -WIDTH OF THE WORK PIECE STOP REAR: (AUXILIARY FENCE TABLE BACK) -1350 MM FOR MACHINING WITH TOOL DIAMETER 25 MM -MAX 1250 MM WITH GLUE -MAX 1220 MM FOR ALL UNITS -WORKPIECE THICKNESS -60 MM WITH STANDARD CLAMP IN USE GLUING UNIT -MAX 300 MM INCL. CLAMPING DEVICE IN USE AS A ROUTER -UP TO 60 MM WITH STANDARD CLAMP WITHOUT CONSTRAINT FOR AGGREGATES AND EXTRACTION -IN THE RADIUS MILLING MIN. 16 MM OR 2 X RADIUS + 10 MM -THE SPECIFIED DIMENSIONS ARE NOT THE MAXIMUM POSSIBLE EDITING VALUES TO EQUATE PER UNIT Â?? SEE SEPARATE TABLES -MINIMUM SIZE OF THE WORKPIECE DEPENDING ON: CLAMPING DEVICES, WORKPIECE SURFACE AND CONTOUR -WORKING HEIGHT BOTTOM WORKPIECE 950 MM -SOIL CONDITIONS MUST COMPLY WITH THE FOUNDATION PLAN 7.5 KW LIQUID-COOLED MAIN SPINDLE -FOR HSK F63 - DIN 69893 SPINDLE RETURN STROKE -ALLOWS THE USE OF THE DRILL HEAD WITH FORM MILLING TOOL IN THE MAIN SPINDLE -TOOL LENGTH INCL. SLEEVE UP TO 150 MM C-AXIS WITH UNITS - ELECTRONIC INTERFACE -FOR MOUNTING OF THE MACHINING AND GLUING AGGREGATES WITH INTEGRATED PNEUMATIC ELECTRICAL ELECTRONICS SUPPLY AND ACTUATOR PROGRAMMING FOR CNC DRAWING LASER POSITIONING AID FOR VACUUM CLAMP ID: 7313 1 TIMES EXTRA CONNECTORS FOR CLAMPING DEVICES ID: 7011 1 TIMES SICHERHEITSABSCHRANKUNG SIDE PANEL LEFT + RIGHT ID: 7325 1 TIMES SHUTTLE MACHINING BXXX/30 /... ID: 7301 2 PIECE LATERAL AND LONGITUDINAL STOP BOLT NOTE AS THE AUXILIARY STOPS RIGHT REAR ID: 7207 6 PIECES STROKE RAIL FOR CONSOLE TABLE B200 NOTE: TO CONSOLE 1 TO 3 AND 5 TO 7 NUMBER: 1 TIMES EXTENSION BOOM B200 ALLOWS YOU TO EDIT THE WIDTH OF A WORKPIECE IN ATTACK, REAR -1730 MM MAX FOR MILLING TOOL DIAMETER 25 MM -MAX 1600 MM FOR ALL UNITS ID: 7450 1 PIECE PLATE CHANGER 18 X INSTEAD OF 12 X OPTIMAT ID: 7403 1 PIECE DRILL HEAD INSTEAD OF 17 SPINDLES 12 SPINDLES ID: 7515 1 PIECE SAW / DRILL UNIT SWIVELING F.WZ CHANGER -UNLIMITED SWIVELING ABOUT C-AXIS ID: 7547 1 PIECE CORNER NOTCHING UNIT FOR WZ CHANGER UNLIMITED SWIVELING ON C-AXIS. ID: 7523 1 PIECE DRILLING / MILLING UNIT 4-SPINDLE F. WZ-CHANGER UNLIMITED SWIVELING ON C-AXIS. ID: 7565 1 PIECE BLOW-OFF NOZZLE FOR WZ CHANGER BY THE EDGE OF THE WORKPIECE ID: 7617 1 PIECE GLUING UNIT 360-DEGREE OPTIMAT ID: 7607 1 PIECE HEIÃ?LUFTDÃ?SE FOR GLUING UNIT 360 DEGREES NUMBER: 7633 1 PIECE 7703 BEFORE CROSSCUTTING STATION AND 1 X ROLL NUMBER: 1 PIECE COMBI-BUENDIGFRAES - AFTER CLEANING UNIT F. WZ-W. ID: 7721 2 PIECE WPL - RADIUS CUTTER HEAD ID: 7877 7 TIMES LED POSITION DISPLAY SYSTEM CONSOLE 1300-1600 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-; power [ps]: 4; gross weight [kg]: 600; engine: hatz es 75 ; POWER [PS]: 4; GROSS WEIGHT [KG]: 600; ENGINE: HATZ ES 75
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-technical data:
-feed infinitely variable 18 - 24 m / min.
-working height 950 mm
-minimum working width:
-55 mm workpiece thickness 22 mm
-100 mm workpiece thickness 60 mm
(depending on the length of the workpiece)
-workpiece projection 30 mm
-workpiece thickness 12-60 mm
-edge material strip max 0,4-20 mm
-edge cross-section strips up to 900 mm2 cross-section
-edge material role 0.3-3 mm
-cross-cutting of the edges roll up 135 mm2 cross-section
-roll diameter of 900 mm
-soil conditions must comply with the foundation plan

facilities:
-trimming unit, 2 motors 3 kw with noise protection
-workpiece preheating
-veleimteil a20, consisting of qa34 melt adhesive unit, magazine, role disconnecting device, pressure zone c, noise protection and end trimming unit hl83
-feeder 2 rolls, folded
-counterpressure roller for narrow parts
-workpiece support in scissor design with roll coating, max 1000 mm extendable, with extension
-stepless shaft edge thickness for the auto. adjustment of the pressure zone
-anti-caking agent unit
-roller changing device 2 x 3.5 mm
-pneumatic adjustment compound miter saw bevel / straight
-milling unit 1 kw, pneum.. adjustable
-form unit fk13, automatic
-adjustment of agggregattraeger continuously for fk device
-universal milling unit, 4 kw, controlled
-multi for plasters in direction
-for plasters in direction glue joint
-chamfer/radiusschleifagggregat below and above (ps 41/42), automatically adjustable
-buffing unit up and down
-nc 21 control 
 TECHNICAL DATA: -FEED INFINITELY VARIABLE 18 - 24 M / MIN. -WORKING HEIGHT 950 MM -MINIMUM WORKING WIDTH: -55 MM WORKPIECE THICKNESS 22 MM -100 MM WORKPIECE THICKNESS 60 MM (DEPENDING ON THE LENGTH OF THE WORKPIECE) -WORKPIECE PROJECTION 30 MM -WORKPIECE THICKNESS 12-60 MM -EDGE MATERIAL STRIP MAX 0,4-20 MM -EDGE CROSS-SECTION STRIPS UP TO 900 MM2 CROSS-SECTION -EDGE MATERIAL ROLE 0.3-3 MM -CROSS-CUTTING OF THE EDGES ROLL UP 135 MM2 CROSS-SECTION -ROLL DIAMETER OF 900 MM -SOIL CONDITIONS MUST COMPLY WITH THE FOUNDATION PLAN FACILITIES: -TRIMMING UNIT, 2 MOTORS 3 KW WITH NOISE PROTECTION -WORKPIECE PREHEATING -VELEIMTEIL A20, CONSISTING OF QA34 MELT ADHESIVE UNIT, MAGAZINE, ROLE DISCONNECTING DEVICE, PRESSURE ZONE C, NOISE PROTECTION AND END TRIMMING UNIT HL83 -FEEDER 2 ROLLS, FOLDED -COUNTERPRESSURE ROLLER FOR NARROW PARTS -WORKPIECE SUPPORT IN SCISSOR DESIGN WITH ROLL COATING, MAX 1000 MM EXTENDABLE, WITH EXTENSION -STEPLESS SHAFT EDGE THICKNESS FOR THE AUTO. ADJUSTMENT OF THE PRESSURE ZONE -ANTI-CAKING AGENT UNIT -ROLLER CHANGING DEVICE 2 X 3.5 MM -PNEUMATIC ADJUSTMENT COMPOUND MITER SAW BEVEL / STRAIGHT -MILLING UNIT 1 KW, PNEUM.. ADJUSTABLE -FORM UNIT FK13, AUTOMATIC -ADJUSTMENT OF AGGGREGATTRAEGER CONTINUOUSLY FOR FK DEVICE -UNIVERSAL MILLING UNIT, 4 KW, CONTROLLED -MULTI FOR PLASTERS IN DIRECTION -FOR PLASTERS IN DIRECTION GLUE JOINT -CHAMFER/RADIUSSCHLEIFAGGGREGAT BELOW AND ABOVE (PS 41/42), AUTOMATICALLY ADJUSTABLE -BUFFING UNIT UP AND DOWN -NC 21 CONTROL
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 25 kg<br/>dimensions (l x w x h) approx.: 350 x 350 x 350 mm<br/>description: different manufacturers, e.g. tecnomagnete maxx 250 WEIGHT APPROX.: 25 KG
DIMENSIONS (L X W X H) APPROX.: 350 X 350 X 350 MM
DESCRIPTION: DIFFERENT MANUFACTURERS, E.G. TECNOMAGNETE MAXX 250
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-single-sided machine to the fã¼gefrã¤sen straight workpiece edges, gluing and manipulating various edging materials from the reel or strip thickness up to 20 mm edge,
in the longitudinal and transverse flow.

fixed left stop page.

equipment:
-robust basic machine with chain for
precise work piece transport
-motorized height-adjustable top pressure with
compound v-belts
-input unit nc21 homatic control
-electronic frequency converter for the
editing aggregates
-trimming unit with 2 motors
-hot melt glue gluing part a20 for rolls
up to 3 mm and strip material up to 20 mm
-noise protection for the machining units
-gluing part a20
-trimming unit chamfer/straight hl04/05,
with pneum. adjustment - free space for more editing aggregates
-0021 feeder 2 rolls
-0171 carriage
-chip conveyor 0429
-0648 workpiece support scissor design
-0649 extension scissor design
-0835 workpiece projection 30 mm instead of 40 mm
-auto 0815. chain rail lubrication
-2182 gluing unit pu34
-2456 extension magazine on 2 wheels
-auto 2603. adjustment pressure zone
-vorfrã¤sgaggregat 3209, pneum.. adjustable
-3709 form unit fk13 8-speed automatic
-3740 manual adjustment for fk device
-3401 universal milling unit 4 kw controlled
-3420 absaugehaube below
-3426 abstastung above for uf11
-3427 scanning side for uf11
-4508 multi for plasters in direction mn21 automatically
-4501 for plasters in direction of glue joints
-4402 buffing unit top and bottom with frequency control

technical data:
-feed infinitely variable 18 - 24 m / min.
-working height 950 mm
-minimum working width:
-55 mm workpiece thickness 22 mm
-100 mm workpiece thickness 60 mm
(depending on the length of the workpiece)
-workpiece projection 30 mm
-workpiece thickness 12-60 mm
-edge material strip max 0,4-20 mm
-edge cross-section strips up to 900 mm2 cross-section
-edge material role 0.3-3 mm
-max - pvc edge cross-section 135 mm2
-for veneer 100 mm2
-roll diameter of maximum 830 mm
-pneumatic connection 7-8 bar
-soil conditions must comply with the foundation plan SINGLE-SIDED MACHINE TO THE F&ATILDE;&FRAC14;GEFR&ATILDE;&CURREN;SEN STRAIGHT WORKPIECE EDGES, GLUING AND MANIPULATING VARIOUS EDGING MATERIALS FROM THE REEL OR STRIP THICKNESS UP TO 20 MM EDGE, IN THE LONGITUDINAL AND TRANSVERSE FLOW. FIXED LEFT STOP PAGE. EQUIPMENT: -ROBUST BASIC MACHINE WITH CHAIN FOR PRECISE WORK PIECE TRANSPORT -MOTORIZED HEIGHT-ADJUSTABLE TOP PRESSURE WITH COMPOUND V-BELTS -INPUT UNIT NC21 HOMATIC CONTROL -ELECTRONIC FREQUENCY CONVERTER FOR THE EDITING AGGREGATES -TRIMMING UNIT WITH 2 MOTORS -HOT MELT GLUE GLUING PART A20 FOR ROLLS UP TO 3 MM AND STRIP MATERIAL UP TO 20 MM -NOISE PROTECTION FOR THE MACHINING UNITS -GLUING PART A20 -TRIMMING UNIT CHAMFER/STRAIGHT HL04/05, WITH PNEUM. ADJUSTMENT - FREE SPACE FOR MORE EDITING AGGREGATES -0021 FEEDER 2 ROLLS -0171 CARRIAGE -CHIP CONVEYOR 0429 -0648 WORKPIECE SUPPORT SCISSOR DESIGN -0649 EXTENSION SCISSOR DESIGN -0835 WORKPIECE PROJECTION 30 MM INSTEAD OF 40 MM -AUTO 0815. CHAIN RAIL LUBRICATION -2182 GLUING UNIT PU34 -2456 EXTENSION MAGAZINE ON 2 WHEELS -AUTO 2603. ADJUSTMENT PRESSURE ZONE -VORFR&ATILDE;&CURREN;SGAGGREGAT 3209, PNEUM.. ADJUSTABLE -3709 FORM UNIT FK13 8-SPEED AUTOMATIC -3740 MANUAL ADJUSTMENT FOR FK DEVICE -3401 UNIVERSAL MILLING UNIT 4 KW CONTROLLED -3420 ABSAUGEHAUBE BELOW -3426 ABSTASTUNG ABOVE FOR UF11 -3427 SCANNING SIDE FOR UF11 -4508 MULTI FOR PLASTERS IN DIRECTION MN21 AUTOMATICALLY -4501 FOR PLASTERS IN DIRECTION OF GLUE JOINTS -4402 BUFFING UNIT TOP AND BOTTOM WITH FREQUENCY CONTROL TECHNICAL DATA: -FEED INFINITELY VARIABLE 18 - 24 M / MIN. -WORKING HEIGHT 950 MM -MINIMUM WORKING WIDTH: -55 MM WORKPIECE THICKNESS 22 MM -100 MM WORKPIECE THICKNESS 60 MM (DEPENDING ON THE LENGTH OF THE WORKPIECE) -WORKPIECE PROJECTION 30 MM -WORKPIECE THICKNESS 12-60 MM -EDGE MATERIAL STRIP MAX 0,4-20 MM -EDGE CROSS-SECTION STRIPS UP TO 900 MM2 CROSS-SECTION -EDGE MATERIAL ROLE 0.3-3 MM -MAX - PVC EDGE CROSS-SECTION 135 MM2 -FOR VENEER 100 MM2 -ROLL DIAMETER OF MAXIMUM 830 MM -PNEUMATIC CONNECTION 7-8 BAR -SOIL CONDITIONS MUST COMPLY WITH THE FOUNDATION PLAN
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: 13.800 €
Ubicación: Land-single sided edge banding machine\r\nbrand: homag\r\ntype: optimat kr 77/a20/s2\r\nyear: 2001\r\n\r\nfor egde banding and processing from coil or as strip, up to 20mm edge thickness in lengthwise and crosswise throughfeed.\r\n\r\ntop pressure:\r\n- with driven joined v-belt\r\n- motoric height adjustable with digital position indicator\r\n\r\ncontrol nc21:\r\n- grafic surface for easy programming\r\n\r\ntechnical data:\r\n- feed stepless controllable 18 - 24 m/min.\r\n\r\n- workpiece thickness 12 - 60 mm\r\n- edge material strips max. 0,4 - 20 mm\r\n- edge material coi 0,3 - 3 mm\r\n\r\nrough milling unit\r\n2 motors each 3 kw, 150 hz., 9000 1/min.\r\n\r\nworkpiece pre-heating\r\nto heat the workpiece edge in front of the glue application for a better banding quality\r\n\r\ngluing unit a20:\r\nhotmelt qa34\r\nmelting unit with granulate tank\r\n\r\npressure zone c\r\n1 driven pre-pressure roller Ø. 150 mm\r\n6 post-pressure rollers Ø. 70 mm\r\n\r\nenn trimming unit hl83 chamfer/straight\r\n2 motors each 0,5 kw, 200 hz., 12000 1/min.\r\n\r\nchip transport belt for optimat\r\n\r\npre-milling unit 1,5 kw optimat\r\n2 motors one above the other each 1,5 kw, 200 hz., 12000 1/min.\r\n\r\nform milling unit fk 13 8-fold automatical\r\nto process the workpiece overhang on the worpiece top and bottom edge as well\r\nfor the milling of the frontal an rear workpiece edge in cooperation with end trimming and pre-milling unit.\r\n2 motors each 0,55 kw, 200 hz., 12000 1/min.\r\nautomatical 8-fold tool changer.\r\n\r\nuniversal milling unit 4 kw controlled optimat\r\ninstalled on the rear side at milling stand.\r\ncros support with spindle adjustment.\r\n1 motor 4 kw, 150 hz., 9000 1/min.\r\nswivable max. 90 degrees.\r\nincl. intermediate support electro pneumatical controlled\r\n\r\nmulti-post cleaning device mn 21 automatc\r\nfor max. 3 different profiles.\r\ntracing from top, bottom and side to chamfer milling or rounding from pre-milled pvc-edges.\r\nblowing nozzles electro pneumatical controlled.\r\n\r\npost cleaning device glued joint\r\nremove of glue rests in the area of the glued joint. tracing from top and bottom.\r\n\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding.\r\n SINGLE SIDED EDGE BANDING MACHINE\R\NBRAND: HOMAG\R\NTYPE: OPTIMAT KR 77/A20/S2\R\NYEAR: 2001\R\N\R\NFOR EGDE BANDING AND PROCESSING FROM COIL OR AS STRIP, UP TO 20MM EDGE THICKNESS IN LENGTHWISE AND CROSSWISE THROUGHFEED.\R\N\R\NTOP PRESSURE:\R\N- WITH DRIVEN JOINED V-BELT\R\N- MOTORIC HEIGHT ADJUSTABLE WITH DIGITAL POSITION INDICATOR\R\N\R\NCONTROL NC21:\R\N- GRAFIC SURFACE FOR EASY PROGRAMMING\R\N\R\NTECHNICAL DATA:\R\N- FEED STEPLESS CONTROLLABLE 18 - 24 M/MIN.\R\N\R\N- WORKPIECE THICKNESS 12 - 60 MM\R\N- EDGE MATERIAL STRIPS MAX. 0,4 - 20 MM\R\N- EDGE MATERIAL COI 0,3 - 3 MM\R\N\R\NROUGH MILLING UNIT\R\N2 MOTORS EACH 3 KW, 150 HZ., 9000 1/MIN.\R\N\R\NWORKPIECE PRE-HEATING\R\NTO HEAT THE WORKPIECE EDGE IN FRONT OF THE GLUE APPLICATION FOR A BETTER BANDING QUALITY\R\N\R\NGLUING UNIT A20:\R\NHOTMELT QA34\R\NMELTING UNIT WITH GRANULATE TANK\R\N\R\NPRESSURE ZONE C\R\N1 DRIVEN PRE-PRESSURE ROLLER Ø. 150 MM\R\N6 POST-PRESSURE ROLLERS Ø. 70 MM\R\N\R\NENN TRIMMING UNIT HL83 CHAMFER/STRAIGHT\R\N2 MOTORS EACH 0,5 KW, 200 HZ., 12000 1/MIN.\R\N\R\NCHIP TRANSPORT BELT FOR OPTIMAT\R\N\R\NPRE-MILLING UNIT 1,5 KW OPTIMAT\R\N2 MOTORS ONE ABOVE THE OTHER EACH 1,5 KW, 200 HZ., 12000 1/MIN.\R\N\R\NFORM MILLING UNIT FK 13 8-FOLD AUTOMATICAL\R\NTO PROCESS THE WORKPIECE OVERHANG ON THE WORPIECE TOP AND BOTTOM EDGE AS WELL\R\NFOR THE MILLING OF THE FRONTAL AN REAR WORKPIECE EDGE IN COOPERATION WITH END TRIMMING AND PRE-MILLING UNIT.\R\N2 MOTORS EACH 0,55 KW, 200 HZ., 12000 1/MIN.\R\NAUTOMATICAL 8-FOLD TOOL CHANGER.\R\N\R\NUNIVERSAL MILLING UNIT 4 KW CONTROLLED OPTIMAT\R\NINSTALLED ON THE REAR SIDE AT MILLING STAND.\R\NCROS SUPPORT WITH SPINDLE ADJUSTMENT.\R\N1 MOTOR 4 KW, 150 HZ., 9000 1/MIN.\R\NSWIVABLE MAX. 90 DEGREES.\R\NINCL. INTERMEDIATE SUPPORT ELECTRO PNEUMATICAL CONTROLLED\R\N\R\NMULTI-POST CLEANING DEVICE MN 21 AUTOMATC\R\NFOR MAX. 3 DIFFERENT PROFILES.\R\NTRACING FROM TOP, BOTTOM AND SIDE TO CHAMFER MILLING OR ROUNDING FROM PRE-MILLED PVC-EDGES.\R\NBLOWING NOZZLES ELECTRO PNEUMATICAL CONTROLLED.\R\N\R\NPOST CLEANING DEVICE GLUED JOINT\R\NREMOVE OF GLUE RESTS IN THE AREA OF THE GLUED JOINT. TRACING FROM TOP AND BOTTOM.\R\N\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-single-sided machine to the fã¼gefrã¤sen straight workpiece edges, gluing and manipulating various edging materials from the reel or strip, up to 20 mm edge thickness, longitudinal and transverse flow.

fixed left stop page.

equipment:
-transport chain for transporting parts
-motorized height-adjustable top pressure - trimming unit with 2 motors 3 kw
-melting glue gluing part a20 (melting glue unit qa34) for rolls
up to 3 mm and strip material up to 20 mm
-automatic adjustment of compression zone
-trimming unit chamfer/straight
-workpiece support in a scissor version,
extendable approx. 1000 mm
-carriage for insertion of workpieces, right-angle fold-down
-chip channel in the machine base
-control nc 21
-automatic adjustment infeed fence
-anti-caking agent sprayer top/bottom
-automatic adjustment of hl81/83
to the elect. pneum.. convert a chamfer on straight and infinitely variable adjustment of the side caps stop to the chamfer caps with different thickness of edges.
-pneumatic adjustment caps motor side
-milling unit with pneum 1.5 kw. adjustment
-contour trimming unit fk 11 with autom. adjustment and interchangeable heads
-for plasters in direction profile with pneum. adjustment
-for plasters in direction joint with pneum. adjustment
-buffing unit up and down

technical data:
-feed infinitely variable 18 - 24 m / min.
-working height 950 mm
-minimum working width:
-55 mm workpiece thickness 22 mm
-100 mm workpiece thickness 60 mm
(depending on the length of the workpiece)
-workpiece projection 30 mm
-workpiece thickness 12-60 mm
-edge material strip max 0,4-20 mm
-edge cross-section strips up to 900 mm2 cross-section
-edge material role 0.3-3 mm
-max - pvc edge cross-section 135 mm2
-for veneer 100 mm2
-roll diameter of maximum 830 mm
-soil conditions must comply with the foundation plan SINGLE-SIDED MACHINE TO THE F&ATILDE;&FRAC14;GEFR&ATILDE;&CURREN;SEN STRAIGHT WORKPIECE EDGES, GLUING AND MANIPULATING VARIOUS EDGING MATERIALS FROM THE REEL OR STRIP, UP TO 20 MM EDGE THICKNESS, LONGITUDINAL AND TRANSVERSE FLOW. FIXED LEFT STOP PAGE. EQUIPMENT: -TRANSPORT CHAIN FOR TRANSPORTING PARTS -MOTORIZED HEIGHT-ADJUSTABLE TOP PRESSURE - TRIMMING UNIT WITH 2 MOTORS 3 KW -MELTING GLUE GLUING PART A20 (MELTING GLUE UNIT QA34) FOR ROLLS UP TO 3 MM AND STRIP MATERIAL UP TO 20 MM -AUTOMATIC ADJUSTMENT OF COMPRESSION ZONE -TRIMMING UNIT CHAMFER/STRAIGHT -WORKPIECE SUPPORT IN A SCISSOR VERSION, EXTENDABLE APPROX. 1000 MM -CARRIAGE FOR INSERTION OF WORKPIECES, RIGHT-ANGLE FOLD-DOWN -CHIP CHANNEL IN THE MACHINE BASE -CONTROL NC 21 -AUTOMATIC ADJUSTMENT INFEED FENCE -ANTI-CAKING AGENT SPRAYER TOP/BOTTOM -AUTOMATIC ADJUSTMENT OF HL81/83 TO THE ELECT. PNEUM.. CONVERT A CHAMFER ON STRAIGHT AND INFINITELY VARIABLE ADJUSTMENT OF THE SIDE CAPS STOP TO THE CHAMFER CAPS WITH DIFFERENT THICKNESS OF EDGES. -PNEUMATIC ADJUSTMENT CAPS MOTOR SIDE -MILLING UNIT WITH PNEUM 1.5 KW. ADJUSTMENT -CONTOUR TRIMMING UNIT FK 11 WITH AUTOM. ADJUSTMENT AND INTERCHANGEABLE HEADS -FOR PLASTERS IN DIRECTION PROFILE WITH PNEUM. ADJUSTMENT -FOR PLASTERS IN DIRECTION JOINT WITH PNEUM. ADJUSTMENT -BUFFING UNIT UP AND DOWN TECHNICAL DATA: -FEED INFINITELY VARIABLE 18 - 24 M / MIN. -WORKING HEIGHT 950 MM -MINIMUM WORKING WIDTH: -55 MM WORKPIECE THICKNESS 22 MM -100 MM WORKPIECE THICKNESS 60 MM (DEPENDING ON THE LENGTH OF THE WORKPIECE) -WORKPIECE PROJECTION 30 MM -WORKPIECE THICKNESS 12-60 MM -EDGE MATERIAL STRIP MAX 0,4-20 MM -EDGE CROSS-SECTION STRIPS UP TO 900 MM2 CROSS-SECTION -EDGE MATERIAL ROLE 0.3-3 MM -MAX - PVC EDGE CROSS-SECTION 135 MM2 -FOR VENEER 100 MM2 -ROLL DIAMETER OF MAXIMUM 830 MM -SOIL CONDITIONS MUST COMPLY WITH THE FOUNDATION PLAN
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-455 kg; power [ps]: 8; gross weight [kg]: 455; engine: hatz 1b40 455 KG; POWER [PS]: 8; GROSS WEIGHT [KG]: 455; ENGINE: HATZ 1B40
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-overview of aggregate loading:
-release agent spraying unit
-trimming unit
-gluing part a20 with 2 wheels
-trimming unit hl84
-milling unit
-contour trimming unit fk11 manual
-profile scraper pn10
-finish unit

1 base machine:
-feed ⦠18 - 25 m / min
-feed up with fk11 ⦠20 m / min
-working height ⦠950 mm
-pneumatic connection ⦠7-8 bar
-total length ⦠7755 mm

2. workpiece and kantenparmeter:
-workpiece width min:
-at work-piece thickness 12-22 mm ⦠60 mm *.
-for panel thickness 23-40 mm ⦠105 mm *.
* depending on the length of the workpiece
-workpiece overhang ⦠30 mm
-workpiece thickness ⦠12-40 mm
(workpiece thickness optional) ⦠8-60 mm
-edge material role ⦠0.3-3 mm
-edge cross section max: â¦
-for pvc ⦠135 mm â²
-for veneer ⦠100 mmâ²
-roll diameter max. ⦠830 mm
-edge material strip ⦠0.4-20 mm
-edge cross section max: â¦
-in strip ⦠900 mmâ²

3. aggregate loading:

3.1 release agent spraying unit top/bottom:

3.2 trimming unit:
-2 motors 3 kw, 150 hz., 9000 rpm
-electro-pneumatic control of both motors

3.3 a20 gluing unit with 2 roles:
consisting of:
workpiece preheating
quickmelt order unit
quick clamping system
magazine 2 roles manually
pressure zone c.

3.4 caps unit chamfer/straight hl84/0.8 kw:
-2 motors per 0.8 kw, 200 hz., 12000 rpm
-engines manually swiveling the chamfer caps

3.5 preliminary milling unit 1.5 kw:
-2 motors one above the other with x 1,5 kw, 200 hz.
and, 12000 1/min
-height with the upper pressure
-working in the opposite direction
-swivel range +/-1 degree

3.6 form milling aggregate fk 11 manual

i - change head kit manually adjustable
-2 exchange heads
-for manual adjustment on the different
edge thicknesses for chamfer milling or the
manual setup of chamfer milling on
radius milling
-maximum thickness of edges of chamfer radius tool:
-r 1.5 = 0.6 mm
-r 2.0 = 0.8 mm
-if r 3.0 = 1.0 mm
-chamfer angle 15 degrees

3.7 profile scraper pn10:
-to the chamfering or rounding of machined
pvc edge

3.8 finishaggregat, consisting of:
-glue joint scraper
-schwabbelaggregat

4. power control pc 22:

other accessories

carriage
folding for the rectangular insertion of workpieces at unilateral editing.
workpiece dimension 500 x 1600 mm

workpiece thickness 60 mm site. 40 mm
-preparation of the base machine and all
units up to the fã¼geaggregat! 
for workpiece thickness 60 mm
at reduced speed
up to 20 m / min.

workpiece thickness 8 mm
-preparation of the basic machine for
workpiece thickness of min. 8 mm instead of 12 mm
-only longitudinal processing without copying it corners
and possible without profile scraper
only for workpieces without top layer projection.

automation package chamfer/radius
-automatic adjustment infeed fence
-automatic adjustment of compression zone
-pneumatic adjustment of straigt on
straight line caps
-pneumatic adjustment of the cap motors
to flush - or ã?bestandskappen
-pneumatic adjustment before milling unit
to flush - or excess of jurisdiction milling
-automatic adjustment of straigt on
radius milling shape milling
-pneumatic adjustment pn10 and fa11
to the side driving away from the
workspace
-electronic height adjustment

workpiece management for fk device
with additional clamping workpiece length
min. 120 mm 
 OVERVIEW OF AGGREGATE LOADING: -RELEASE AGENT SPRAYING UNIT -TRIMMING UNIT -GLUING PART A20 WITH 2 WHEELS -TRIMMING UNIT HL84 -MILLING UNIT -CONTOUR TRIMMING UNIT FK11 MANUAL -PROFILE SCRAPER PN10 -FINISH UNIT 1 BASE MACHINE: -FEED &ACIRC;&BRVBAR; 18 - 25 M / MIN -FEED UP WITH FK11 &ACIRC;&BRVBAR; 20 M / MIN -WORKING HEIGHT &ACIRC;&BRVBAR; 950 MM -PNEUMATIC CONNECTION &ACIRC;&BRVBAR; 7-8 BAR -TOTAL LENGTH &ACIRC;&BRVBAR; 7755 MM 2. WORKPIECE AND KANTENPARMETER: -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM &ACIRC;&BRVBAR; 60 MM *. -FOR PANEL THICKNESS 23-40 MM &ACIRC;&BRVBAR; 105 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG &ACIRC;&BRVBAR; 30 MM -WORKPIECE THICKNESS &ACIRC;&BRVBAR; 12-40 MM (WORKPIECE THICKNESS OPTIONAL) &ACIRC;&BRVBAR; 8-60 MM -EDGE MATERIAL ROLE &ACIRC;&BRVBAR; 0.3-3 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -FOR PVC &ACIRC;&BRVBAR; 135 MM &ACIRC;&SUP2; -FOR VENEER &ACIRC;&BRVBAR; 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP &ACIRC;&BRVBAR; 0.4-20 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -IN STRIP &ACIRC;&BRVBAR; 900 MM&ACIRC;&SUP2; 3. AGGREGATE LOADING: 3.1 RELEASE AGENT SPRAYING UNIT TOP/BOTTOM: 3.2 TRIMMING UNIT: -2 MOTORS 3 KW, 150 HZ., 9000 RPM -ELECTRO-PNEUMATIC CONTROL OF BOTH MOTORS 3.3 A20 GLUING UNIT WITH 2 ROLES: CONSISTING OF: WORKPIECE PREHEATING QUICKMELT ORDER UNIT QUICK CLAMPING SYSTEM MAGAZINE 2 ROLES MANUALLY PRESSURE ZONE C. 3.4 CAPS UNIT CHAMFER/STRAIGHT HL84/0.8 KW: -2 MOTORS PER 0.8 KW, 200 HZ., 12000 RPM -ENGINES MANUALLY SWIVELING THE CHAMFER CAPS 3.5 PRELIMINARY MILLING UNIT 1.5 KW: -2 MOTORS ONE ABOVE THE OTHER WITH X 1,5 KW, 200 HZ. AND, 12000 1/MIN -HEIGHT WITH THE UPPER PRESSURE -WORKING IN THE OPPOSITE DIRECTION -SWIVEL RANGE +/-1 DEGREE 3.6 FORM MILLING AGGREGATE FK 11 MANUAL I - CHANGE HEAD KIT MANUALLY ADJUSTABLE -2 EXCHANGE HEADS -FOR MANUAL ADJUSTMENT ON THE DIFFERENT EDGE THICKNESSES FOR CHAMFER MILLING OR THE MANUAL SETUP OF CHAMFER MILLING ON RADIUS MILLING -MAXIMUM THICKNESS OF EDGES OF CHAMFER RADIUS TOOL: -R 1.5 = 0.6 MM -R 2.0 = 0.8 MM -IF R 3.0 = 1.0 MM -CHAMFER ANGLE 15 DEGREES 3.7 PROFILE SCRAPER PN10: -TO THE CHAMFERING OR ROUNDING OF MACHINED PVC EDGE 3.8 FINISHAGGREGAT, CONSISTING OF: -GLUE JOINT SCRAPER -SCHWABBELAGGREGAT 4. POWER CONTROL PC 22: OTHER ACCESSORIES CARRIAGE FOLDING FOR THE RECTANGULAR INSERTION OF WORKPIECES AT UNILATERAL EDITING. WORKPIECE DIMENSION 500 X 1600 MM WORKPIECE THICKNESS 60 MM SITE. 40 MM -PREPARATION OF THE BASE MACHINE AND ALL UNITS UP TO THE F&ATILDE;&FRAC14;GEAGGREGAT! FOR WORKPIECE THICKNESS 60 MM AT REDUCED SPEED UP TO 20 M / MIN. WORKPIECE THICKNESS 8 MM -PREPARATION OF THE BASIC MACHINE FOR WORKPIECE THICKNESS OF MIN. 8 MM INSTEAD OF 12 MM -ONLY LONGITUDINAL PROCESSING WITHOUT COPYING IT CORNERS AND POSSIBLE WITHOUT PROFILE SCRAPER ONLY FOR WORKPIECES WITHOUT TOP LAYER PROJECTION. AUTOMATION PACKAGE CHAMFER/RADIUS -AUTOMATIC ADJUSTMENT INFEED FENCE -AUTOMATIC ADJUSTMENT OF COMPRESSION ZONE -PNEUMATIC ADJUSTMENT OF STRAIGT ON STRAIGHT LINE CAPS -PNEUMATIC ADJUSTMENT OF THE CAP MOTORS TO FLUSH - OR &ATILDE;?BESTANDSKAPPEN -PNEUMATIC ADJUSTMENT BEFORE MILLING UNIT TO FLUSH - OR EXCESS OF JURISDICTION MILLING -AUTOMATIC ADJUSTMENT OF STRAIGT ON RADIUS MILLING SHAPE MILLING -PNEUMATIC ADJUSTMENT PN10 AND FA11 TO THE SIDE DRIVING AWAY FROM THE WORKSPACE -ELECTRONIC HEIGHT ADJUSTMENT WORKPIECE MANAGEMENT FOR FK DEVICE WITH ADDITIONAL CLAMPING WORKPIECE LENGTH MIN. 120 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-590 kg net weight; power [ps]: 12; gross weight [kg]: 590; engine: hatz 1d81 590 KG NET WEIGHT; POWER [PS]: 12; GROSS WEIGHT [KG]: 590; ENGINE: HATZ 1D81
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-overview of aggregate loading:
-release agent spraying unit
-trimming unit
-gluing part a20 with 2 wheels
-trimming unit hl84
-milling unit
-contour trimming unit fk 11 manual
-profile scraper pn10
-profile scraper pn10
-finish unit

1 base machine:
-feed ⦠18 - 25 m / min
-feed up with fk13 ⦠20 m / min
-working height ⦠950 mm
-pneumatic connection ⦠7-8 bar
-total length ⦠8545 mm

2. workpiece and kantenparmeter:
-workpiece width min:
-at work-piece thickness 12-22 mm ⦠60 mm *.
-for panel thickness 23-40 mm ⦠105 mm *.
* depending on the length of the workpiece
-workpiece overhang ⦠30 mm
-workpiece thickness ⦠12-40 mm
(workpiece thickness optional) ⦠8-60 mm
-edge material role ⦠0.3-3 mm
-edge cross section max: â¦
-for pvc ⦠135 mm â²
-for veneer ⦠100 mmâ²
-roll diameter max. ⦠830 mm
-edge material strip ⦠0.4-20 mm
-edge cross section max: â¦
-in strip ⦠900 mmâ²

3. aggregate loading:

3.1 release agent spraying unit top/bottom

3.2 trimming unit:
-2 motors 3 kw, 150 hz., 9000 rpm
-electro-pneumatic control of both motors

3.3 a20 gluing unit with 2 roles:
consisting of:
workpiece preheating
quickmelt order unit
quick clamping system
magazine 2 roles manually
pressure zone c.
-order unit with fine fluting-

3.4 caps unit chamfer/straight hl84/0.8 kw:
-2 motors per 0.8 kw, 200 hz., 12000 rpm
-engines manually swiveling the chamfer caps

3.5 preliminary milling unit 1.5 kw:
-2 motors one above the other with x 1,5 kw, 200 hz.
and, 12000 1/min
-height with the upper pressure
-working in the opposite direction
-swivel range +/-1 degree

3.6 form milling aggregate fk 11 manual
the following tools was included with delivery:
-i change head set, autom. adjustable - i india radius cutter set for fk r = 2 mm 3.7 profile scraper pn10:
-to the chamfering or rounding of machined
pvc edges, with quick change heads

3.8 profile scraper pn10:
-to the chamfering or rounding of machined
pvc edges, with quick change heads

3.9 finishaggregat, consisting of:
-glue joint scraper
-schwabbelaggregat

4. power control pc 22:

change:
-customized exhaust hoods, so that higher edge overhangs can be driven. example: 25mm 16 mm panel thickness edge height (or 23 mm / 33 mm)

other accessories

workpiece thickness 60 mm site. 40 mm
-preparation of the base machine and all
units up to the fã¼geaggregat! 
for workpiece thickness 60 mm
at reduced speed
up to 20 m / min.

workpiece thickness 8 mm
-preparation of the basic machine for
workpiece thickness of min. 8 mm instead of 12 mm
-only longitudinal processing without copying it corners
and possible without profile scraper
only for workpieces without top layer projection.

workpiece support in scissor design
-with roll coating, max. 1000 mm extendable

remote control for ambition

automation package chamfer/radius
-automatic adjustment infeed fence
-automatic adjustment of compression zone
-pneumatic adjustment before milling unit to flush - or excess of jurisdiction milling
-multi scraper mn21 automatically instead of
2xpn10, to automatically convert different radius or chamfer
-electronic height adjustment

detergent spray unit top/bottom
 OVERVIEW OF AGGREGATE LOADING: -RELEASE AGENT SPRAYING UNIT -TRIMMING UNIT -GLUING PART A20 WITH 2 WHEELS -TRIMMING UNIT HL84 -MILLING UNIT -CONTOUR TRIMMING UNIT FK 11 MANUAL -PROFILE SCRAPER PN10 -PROFILE SCRAPER PN10 -FINISH UNIT 1 BASE MACHINE: -FEED &ACIRC;&BRVBAR; 18 - 25 M / MIN -FEED UP WITH FK13 &ACIRC;&BRVBAR; 20 M / MIN -WORKING HEIGHT &ACIRC;&BRVBAR; 950 MM -PNEUMATIC CONNECTION &ACIRC;&BRVBAR; 7-8 BAR -TOTAL LENGTH &ACIRC;&BRVBAR; 8545 MM 2. WORKPIECE AND KANTENPARMETER: -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM &ACIRC;&BRVBAR; 60 MM *. -FOR PANEL THICKNESS 23-40 MM &ACIRC;&BRVBAR; 105 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG &ACIRC;&BRVBAR; 30 MM -WORKPIECE THICKNESS &ACIRC;&BRVBAR; 12-40 MM (WORKPIECE THICKNESS OPTIONAL) &ACIRC;&BRVBAR; 8-60 MM -EDGE MATERIAL ROLE &ACIRC;&BRVBAR; 0.3-3 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -FOR PVC &ACIRC;&BRVBAR; 135 MM &ACIRC;&SUP2; -FOR VENEER &ACIRC;&BRVBAR; 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP &ACIRC;&BRVBAR; 0.4-20 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -IN STRIP &ACIRC;&BRVBAR; 900 MM&ACIRC;&SUP2; 3. AGGREGATE LOADING: 3.1 RELEASE AGENT SPRAYING UNIT TOP/BOTTOM 3.2 TRIMMING UNIT: -2 MOTORS 3 KW, 150 HZ., 9000 RPM -ELECTRO-PNEUMATIC CONTROL OF BOTH MOTORS 3.3 A20 GLUING UNIT WITH 2 ROLES: CONSISTING OF: WORKPIECE PREHEATING QUICKMELT ORDER UNIT QUICK CLAMPING SYSTEM MAGAZINE 2 ROLES MANUALLY PRESSURE ZONE C. -ORDER UNIT WITH FINE FLUTING- 3.4 CAPS UNIT CHAMFER/STRAIGHT HL84/0.8 KW: -2 MOTORS PER 0.8 KW, 200 HZ., 12000 RPM -ENGINES MANUALLY SWIVELING THE CHAMFER CAPS 3.5 PRELIMINARY MILLING UNIT 1.5 KW: -2 MOTORS ONE ABOVE THE OTHER WITH X 1,5 KW, 200 HZ. AND, 12000 1/MIN -HEIGHT WITH THE UPPER PRESSURE -WORKING IN THE OPPOSITE DIRECTION -SWIVEL RANGE +/-1 DEGREE 3.6 FORM MILLING AGGREGATE FK 11 MANUAL THE FOLLOWING TOOLS WAS INCLUDED WITH DELIVERY: -I CHANGE HEAD SET, AUTOM. ADJUSTABLE - I INDIA RADIUS CUTTER SET FOR FK R = 2 MM 3.7 PROFILE SCRAPER PN10: -TO THE CHAMFERING OR ROUNDING OF MACHINED PVC EDGES, WITH QUICK CHANGE HEADS 3.8 PROFILE SCRAPER PN10: -TO THE CHAMFERING OR ROUNDING OF MACHINED PVC EDGES, WITH QUICK CHANGE HEADS 3.9 FINISHAGGREGAT, CONSISTING OF: -GLUE JOINT SCRAPER -SCHWABBELAGGREGAT 4. POWER CONTROL PC 22: CHANGE: -CUSTOMIZED EXHAUST HOODS, SO THAT HIGHER EDGE OVERHANGS CAN BE DRIVEN. EXAMPLE: 25MM 16 MM PANEL THICKNESS EDGE HEIGHT (OR 23 MM / 33 MM) OTHER ACCESSORIES WORKPIECE THICKNESS 60 MM SITE. 40 MM -PREPARATION OF THE BASE MACHINE AND ALL UNITS UP TO THE F&ATILDE;&FRAC14;GEAGGREGAT! FOR WORKPIECE THICKNESS 60 MM AT REDUCED SPEED UP TO 20 M / MIN. WORKPIECE THICKNESS 8 MM -PREPARATION OF THE BASIC MACHINE FOR WORKPIECE THICKNESS OF MIN. 8 MM INSTEAD OF 12 MM -ONLY LONGITUDINAL PROCESSING WITHOUT COPYING IT CORNERS AND POSSIBLE WITHOUT PROFILE SCRAPER ONLY FOR WORKPIECES WITHOUT TOP LAYER PROJECTION. WORKPIECE SUPPORT IN SCISSOR DESIGN -WITH ROLL COATING, MAX. 1000 MM EXTENDABLE REMOTE CONTROL FOR AMBITION AUTOMATION PACKAGE CHAMFER/RADIUS -AUTOMATIC ADJUSTMENT INFEED FENCE -AUTOMATIC ADJUSTMENT OF COMPRESSION ZONE -PNEUMATIC ADJUSTMENT BEFORE MILLING UNIT TO FLUSH - OR EXCESS OF JURISDICTION MILLING -MULTI SCRAPER MN21 AUTOMATICALLY INSTEAD OF 2XPN10, TO AUTOMATICALLY CONVERT DIFFERENT RADIUS OR CHAMFER -ELECTRONIC HEIGHT ADJUSTMENT DETERGENT SPRAY UNIT TOP/BOTTOM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-70 kg; power [ps]: 3; gross weight [kg]: 70; engine: hondagx100 70 KG; POWER [PS]: 3; GROSS WEIGHT [KG]: 70; ENGINE: HONDAGX100
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-facilities
-hot melt glue gluing part a20 for rolls
up to 3 mm and strip material up to 20 mm
-hl83 facet/straight unit
-extension running 500 mm
-workpiece support in a scissor version,
extendable up to 1000 mm
-autom. adjustment of the pressure zone
-pneum.. adjustment cap motor
-pneum.. adjustment of chamfer/straight
-milling unit 1.5 kw
-pneum.. adjustment before milling unit
-contour trimming unit fk 11 manual
i-wechelkopfsatz for profile milling
slide bevel cutter set for fk11 20 degrees (1st movement)
slide radius cutter set for fk11 r2 (2nd movement)
-for plasters in direction profile
-pneum.. adjustment for cleaning
-for plasters in direction glue joint
-use control glue grout scraper
-buffing unit up and down
-electr. height adjustment

technical data:
-feed infinitely variable 18 - 24 m / min.
-working height 950 mm
-minimum working width:
-55 mm workpiece thickness 22 mm
-100 mm workpiece thickness 60 mm
(depending on the length of the workpiece)
-workpiece projection 30 mm
-workpiece thickness 12-60 mm
-edge material strip max 0,4-20 mm
-edge cross-section strips up to 900 mm2 cross-section
-edge material role 0.3-3 mm
-max - pvc edge cross-section 135 mm2
-for veneer 100 mm2
-roll diameter of maximum 830 mm
-pneumatic connection 7-8 bar FACILITIES -HOT MELT GLUE GLUING PART A20 FOR ROLLS UP TO 3 MM AND STRIP MATERIAL UP TO 20 MM -HL83 FACET/STRAIGHT UNIT -EXTENSION RUNNING 500 MM -WORKPIECE SUPPORT IN A SCISSOR VERSION, EXTENDABLE UP TO 1000 MM -AUTOM. ADJUSTMENT OF THE PRESSURE ZONE -PNEUM.. ADJUSTMENT CAP MOTOR -PNEUM.. ADJUSTMENT OF CHAMFER/STRAIGHT -MILLING UNIT 1.5 KW -PNEUM.. ADJUSTMENT BEFORE MILLING UNIT -CONTOUR TRIMMING UNIT FK 11 MANUAL I-WECHELKOPFSATZ FOR PROFILE MILLING SLIDE BEVEL CUTTER SET FOR FK11 20 DEGREES (1ST MOVEMENT) SLIDE RADIUS CUTTER SET FOR FK11 R2 (2ND MOVEMENT) -FOR PLASTERS IN DIRECTION PROFILE -PNEUM.. ADJUSTMENT FOR CLEANING -FOR PLASTERS IN DIRECTION GLUE JOINT -USE CONTROL GLUE GROUT SCRAPER -BUFFING UNIT UP AND DOWN -ELECTR. HEIGHT ADJUSTMENT TECHNICAL DATA: -FEED INFINITELY VARIABLE 18 - 24 M / MIN. -WORKING HEIGHT 950 MM -MINIMUM WORKING WIDTH: -55 MM WORKPIECE THICKNESS 22 MM -100 MM WORKPIECE THICKNESS 60 MM (DEPENDING ON THE LENGTH OF THE WORKPIECE) -WORKPIECE PROJECTION 30 MM -WORKPIECE THICKNESS 12-60 MM -EDGE MATERIAL STRIP MAX 0,4-20 MM -EDGE CROSS-SECTION STRIPS UP TO 900 MM2 CROSS-SECTION -EDGE MATERIAL ROLE 0.3-3 MM -MAX - PVC EDGE CROSS-SECTION 135 MM2 -FOR VENEER 100 MM2 -ROLL DIAMETER OF MAXIMUM 830 MM -PNEUMATIC CONNECTION 7-8 BAR
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-1,3 t.,; power [ps]: 13; gross weight [kg]: 1300; engine: deutz f1l210d 1,3 T.,; POWER [PS]: 13; GROSS WEIGHT [KG]: 1300; ENGINE: DEUTZ F1L210D
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-overview of aggregate loading:
-release agent spraying unit
-trimming unit
-gluing part a20 with 2 wheels
-trimming unit hl84
-milling unit
-contour trimming unit fk11 manual
-profile scraper pn10
-finish unit
-glue joint scraper
-schwabbelaggregat

power contraol pc 22

technical data:
-feed ⦠18 - 25 m / min
-feed up with fk11 ⦠20 m / min
-working height ⦠950 mm
-pneumatic connection ⦠7-8 bar
-total length ⦠7755 mm
-workpiece width min:
-at work-piece thickness 12-22 mm ⦠60 mm *.
-for panel thickness 23-40 mm ⦠105 mm *.
* depending on the length of the workpiece
-workpiece overhang ⦠30 mm
-workpiece thickness ⦠12-40 mm
(workpiece thickness optional) ⦠8-60 mm
-edge material role ⦠0.3-3 mm
-edge cross section max: â¦
-for pvc ⦠135 mm â²
-for veneer ⦠100 mmâ²
-roll diameter max. ⦠830 mm
-edge material strip ⦠0.4-20 mm
-edge cross section max: â¦
-in strip ⦠900 mmâ²

amenities:
-workpiece support scissor design kal
210/6
-workpiece thickness 60 mm site. 40 mm
-workpiece thickness 8 mm kal200/300/kfl500
-order unit pu (changeable
-qa glue container front piece (removable)
-automation package chamfer/radius
kal210/6/a20
-vertical double roll keying
-work guide for fk device
i change head set for form milling fk
-i india radius cutter set r = 1,5-3 mm ambition
-detergent spraying unit top/bottom
ambition
 OVERVIEW OF AGGREGATE LOADING: -RELEASE AGENT SPRAYING UNIT -TRIMMING UNIT -GLUING PART A20 WITH 2 WHEELS -TRIMMING UNIT HL84 -MILLING UNIT -CONTOUR TRIMMING UNIT FK11 MANUAL -PROFILE SCRAPER PN10 -FINISH UNIT -GLUE JOINT SCRAPER -SCHWABBELAGGREGAT POWER CONTRAOL PC 22 TECHNICAL DATA: -FEED &ACIRC;&BRVBAR; 18 - 25 M / MIN -FEED UP WITH FK11 &ACIRC;&BRVBAR; 20 M / MIN -WORKING HEIGHT &ACIRC;&BRVBAR; 950 MM -PNEUMATIC CONNECTION &ACIRC;&BRVBAR; 7-8 BAR -TOTAL LENGTH &ACIRC;&BRVBAR; 7755 MM -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM &ACIRC;&BRVBAR; 60 MM *. -FOR PANEL THICKNESS 23-40 MM &ACIRC;&BRVBAR; 105 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG &ACIRC;&BRVBAR; 30 MM -WORKPIECE THICKNESS &ACIRC;&BRVBAR; 12-40 MM (WORKPIECE THICKNESS OPTIONAL) &ACIRC;&BRVBAR; 8-60 MM -EDGE MATERIAL ROLE &ACIRC;&BRVBAR; 0.3-3 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -FOR PVC &ACIRC;&BRVBAR; 135 MM &ACIRC;&SUP2; -FOR VENEER &ACIRC;&BRVBAR; 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP &ACIRC;&BRVBAR; 0.4-20 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -IN STRIP &ACIRC;&BRVBAR; 900 MM&ACIRC;&SUP2; AMENITIES: -WORKPIECE SUPPORT SCISSOR DESIGN KAL 210/6 -WORKPIECE THICKNESS 60 MM SITE. 40 MM -WORKPIECE THICKNESS 8 MM KAL200/300/KFL500 -ORDER UNIT PU (CHANGEABLE -QA GLUE CONTAINER FRONT PIECE (REMOVABLE) -AUTOMATION PACKAGE CHAMFER/RADIUS KAL210/6/A20 -VERTICAL DOUBLE ROLL KEYING -WORK GUIDE FOR FK DEVICE I CHANGE HEAD SET FOR FORM MILLING FK -I INDIA RADIUS CUTTER SET R = 1,5-3 MM AMBITION -DETERGENT SPRAYING UNIT TOP/BOTTOM AMBITION
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-386 kg; power [ps]: 8; gross weight [kg]: 386; engine: hatz 1b40 386 KG; POWER [PS]: 8; GROSS WEIGHT [KG]: 386; ENGINE: HATZ 1B40
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land--working width 510 mm
-task table length 1,450 mm
-decrease table length 1260 mm
 -WORKING WIDTH 510 MM -TASK TABLE LENGTH 1,450 MM -DECREASE TABLE LENGTH 1260 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-; power [ps]: 8; gross weight [kg]: 405; engine: hatz 1b40 ; POWER [PS]: 8; GROSS WEIGHT [KG]: 405; ENGINE: HATZ 1B40
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-comagrav notus cnc router milling machine
workspace 1250 x 2100 mm.
year of manufacture 2010
control system: pilot, cctv system, vacuum ac servo motors.
aluminium vacuum table 4 zones, cutting and milling pillow, vacuum pump
camera system for the cutting of printed matter
pneumatic knife - 9,000 vibrations per minute
roles roles of smooth cardboard until to bc wool.
milling spindle - 1.5 kw, 40,000 u / min, automatic tool change
rotary tool changer - carousel, 8 tool positions including cone, pliers, nuts and wrenches
dust extraction and splitter. COMAGRAV NOTUS CNC ROUTER MILLING MACHINE WORKSPACE 1250 X 2100 MM. YEAR OF MANUFACTURE 2010 CONTROL SYSTEM: PILOT, CCTV SYSTEM, VACUUM AC SERVO MOTORS. ALUMINIUM VACUUM TABLE 4 ZONES, CUTTING AND MILLING PILLOW, VACUUM PUMP CAMERA SYSTEM FOR THE CUTTING OF PRINTED MATTER PNEUMATIC KNIFE - 9,000 VIBRATIONS PER MINUTE ROLES ROLES OF SMOOTH CARDBOARD UNTIL TO BC WOOL. MILLING SPINDLE - 1.5 KW, 40,000 U / MIN, AUTOMATIC TOOL CHANGE ROTARY TOOL CHANGER - CAROUSEL, 8 TOOL POSITIONS INCLUDING CONE, PLIERS, NUTS AND WRENCHES DUST EXTRACTION AND SPLITTER.
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-220 kg; power [ps]: 4; gross weight [kg]: 220; engine: hatz1b20 220 KG; POWER [PS]: 4; GROSS WEIGHT [KG]: 220; ENGINE: HATZ1B20
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-weinmann, production line, assembly tables, butterfly turner

weinmann production line for the industrial production of panels in wood frame construction, or remodeler.

manufacturer weinmann homag, germany
year 2012-2018
condition: good, dismantled
availability: immediately

consisting of:

1. mounting table with stop 12000 x 3000 mm
without function

2. walker professional wtw150/12 (12000 x 3000)
carriage with pressing device
equipment no.: 0-391-15-0884
year of construction: 2012

3. walker professional wtw150/12 (12000 x 3000)
with 3 longitudinal conveyor belt with flat chain
equipment no.: 0-391-15-0875
year of construction: 2012

4. walker professional wtw150/12 (12000 x 3000)
employees table, butterfly turner
powered by transverse
year of construction: 2012

5. walker professional wtw150/12 (12000 x 3000)
with longitudinal and transverse driven

6 walker professional wtw150/12 (12000 x 3000)

7 damer b + b (10000 x 3000) year: 2018
powered by inline transport
employer table, butterfly turner

8 damer b + b (12000 x 3000) year: 2018
with roller longitudinal

9 distribution wagon

10 elements magazine

11 vacuum lifters for osb and fiber panels

price on request WEINMANN, PRODUCTION LINE, ASSEMBLY TABLES, BUTTERFLY TURNER WEINMANN PRODUCTION LINE FOR THE INDUSTRIAL PRODUCTION OF PANELS IN WOOD FRAME CONSTRUCTION, OR REMODELER. MANUFACTURER WEINMANN HOMAG, GERMANY YEAR 2012-2018 CONDITION: GOOD, DISMANTLED AVAILABILITY: IMMEDIATELY CONSISTING OF: 1. MOUNTING TABLE WITH STOP 12000 X 3000 MM WITHOUT FUNCTION 2. WALKER PROFESSIONAL WTW150/12 (12000 X 3000) CARRIAGE WITH PRESSING DEVICE EQUIPMENT NO.: 0-391-15-0884 YEAR OF CONSTRUCTION: 2012 3. WALKER PROFESSIONAL WTW150/12 (12000 X 3000) WITH 3 LONGITUDINAL CONVEYOR BELT WITH FLAT CHAIN EQUIPMENT NO.: 0-391-15-0875 YEAR OF CONSTRUCTION: 2012 4. WALKER PROFESSIONAL WTW150/12 (12000 X 3000) EMPLOYEES TABLE, BUTTERFLY TURNER POWERED BY TRANSVERSE YEAR OF CONSTRUCTION: 2012 5. WALKER PROFESSIONAL WTW150/12 (12000 X 3000) WITH LONGITUDINAL AND TRANSVERSE DRIVEN 6 WALKER PROFESSIONAL WTW150/12 (12000 X 3000) 7 DAMER B + B (10000 X 3000) YEAR: 2018 POWERED BY INLINE TRANSPORT EMPLOYER TABLE, BUTTERFLY TURNER 8 DAMER B + B (12000 X 3000) YEAR: 2018 WITH ROLLER LONGITUDINAL 9 DISTRIBUTION WAGON 10 ELEMENTS MAGAZINE 11 VACUUM LIFTERS FOR OSB AND FIBER PANELS PRICE ON REQUEST
Vendedor: SN-InTec Ltd.& CO.KG
Año de construcción: usado
Ubicación: Land-; power [ps]: 8; gross weight [kg]: 400; engine: hatz 1b40 ; POWER [PS]: 8; GROSS WEIGHT [KG]: 400; ENGINE: HATZ 1B40
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-omag tronic concrete block / pavingstone machine, 1996.

the package incl: elevator system 10 stages. lowerator. pallet feeding device. cuber unit. pallet magazine. pallet turning device. cleaning brush. stacking device. complete finger car system. foil wrapping device. many moulds!! super price for quick response!! can be seen after appointment.

amexpo consult
merkurvej 31
9370 hals - denmark
phone: +45 29251017 OMAG TRONIC CONCRETE BLOCK / PAVINGSTONE MACHINE, 1996. THE PACKAGE INCL: ELEVATOR SYSTEM 10 STAGES. LOWERATOR. PALLET FEEDING DEVICE. CUBER UNIT. PALLET MAGAZINE. PALLET TURNING DEVICE. CLEANING BRUSH. STACKING DEVICE. COMPLETE FINGER CAR SYSTEM. FOIL WRAPPING DEVICE. MANY MOULDS!! SUPER PRICE FOR QUICK RESPONSE!! CAN BE SEEN AFTER APPOINTMENT. AMEXPO CONSULT MERKURVEJ 31 9370 HALS - DENMARK PHONE: +45 29251017
Vendedor: Amexpo Consult
Año de construcción: usado
Ubicación: Land-1,5 to net weight; power [ps]: 19; gross weight [kg]: 1595; engine: kubota d 1005 1,5 TO NET WEIGHT; POWER [PS]: 19; GROSS WEIGHT [KG]: 1595; ENGINE: KUBOTA D 1005
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Precio: 800 €
Ubicación: Land-welding machine poromag 300 k

including almost new tbi250 torch and earth cable
pressure regulator
new coil wire 1, 0 mm
device is mobile
power supply 380v
max current 300a

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". WELDING MACHINE POROMAG 300 K INCLUDING ALMOST NEW TBI250 TORCH AND EARTH CABLE PRESSURE REGULATOR NEW COIL WIRE 1, 0 MM DEVICE IS MOBILE POWER SUPPLY 380V MAX CURRENT 300A PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Precio: used machinery auction RESALE 4.500 €
Ubicación: Land-weight approx.: 11000 kg<br/>control: homatic <br/>dimensions (l x w x h) approx.: 19000 x 2400 x 2400 mm<br/>c-axis: ja / yes <br/>working length x-axis: 5800 mm<br/>working width y-axis: 1480 mm<br/>main spindle: 12 kw<br/>tool changer: 12 <br/>drilling head vertical x-axis: 6 piece<br/>drilling head vertical y-axis: 7 piece<br/>drilling head horizontal x-axis: 2 piece<br/>drilling head horizontal y-axis: 2 piece<br/>edge gluing unit: ja / yes <br/>travelling way z-axis: 535 mm<br/>description: homag baz 32/50/g cnc machining center<br> <br> - without tools, tool holders and aggregates<br> <br> <br> transportation of the dismantled machine requires a transport rack supplied by homag which incurs costs of eur 4,000,-- plus vat. after the transport rack has been returned to surplex, this amount minus a value deduction of 10 % will be refunded.)  <br> <br> WEIGHT APPROX.: 11000 KG
CONTROL: HOMATIC
DIMENSIONS (L X W X H) APPROX.: 19000 X 2400 X 2400 MM
C-AXIS: JA / YES
WORKING LENGTH X-AXIS: 5800 MM
WORKING WIDTH Y-AXIS: 1480 MM
MAIN SPINDLE: 12 KW
TOOL CHANGER: 12
DRILLING HEAD VERTICAL X-AXIS: 6 PIECE
DRILLING HEAD VERTICAL Y-AXIS: 7 PIECE
DRILLING HEAD HORIZONTAL X-AXIS: 2 PIECE
DRILLING HEAD HORIZONTAL Y-AXIS: 2 PIECE
EDGE GLUING UNIT: JA / YES
TRAVELLING WAY Z-AXIS: 535 MM
DESCRIPTION: HOMAG BAZ 32/50/G CNC MACHINING CENTER

- WITHOUT TOOLS, TOOL HOLDERS AND AGGREGATES


TRANSPORTATION OF THE DISMANTLED MACHINE REQUIRES A TRANSPORT RACK SUPPLIED BY HOMAG WHICH INCURS COSTS OF EUR 4,000,-- PLUS VAT. AFTER THE TRANSPORT RACK HAS BEEN RETURNED TO SURPLEX, THIS AMOUNT MINUS A VALUE DEDUCTION OF 10 % WILL BE REFUNDED.)

Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cnc machining center homag optimat baz 41/k 

year of constr. 1998, good condition 
machine is used 

control system: homatic 83
processing dimensions unlimited 3000 x 1050 x 60 mm 
processing dimensions milling 3150 x 1200 mm 
4 axis spindle 12 kw s1 operation, with electronic cut surface in 2006 replaced 
with 12-fold tool change system, without aggregates 
pich-up changer for gluing
17 spindles vertical boaring gears 
siemens water ring vacuum pump 66m³ 

without tools 
space requirement 6000 x 4000 mm 
weight ca. 4200 kg 

used machines without guarantee. 
we sell for our customer ex location, nearby bodensee in south germany 
machine can be visited at current location 
subject to prior sale 
 CNC MACHINING CENTER HOMAG OPTIMAT BAZ 41/K YEAR OF CONSTR. 1998, GOOD CONDITION MACHINE IS USED CONTROL SYSTEM: HOMATIC 83 PROCESSING DIMENSIONS UNLIMITED 3000 X 1050 X 60 MM PROCESSING DIMENSIONS MILLING 3150 X 1200 MM 4 AXIS SPINDLE 12 KW S1 OPERATION, WITH ELECTRONIC CUT SURFACE IN 2006 REPLACED WITH 12-FOLD TOOL CHANGE SYSTEM, WITHOUT AGGREGATES PICH-UP CHANGER FOR GLUING 17 SPINDLES VERTICAL BOARING GEARS SIEMENS WATER RING VACUUM PUMP 66M³ WITHOUT TOOLS SPACE REQUIREMENT 6000 X 4000 MM WEIGHT CA. 4200 KG USED MACHINES WITHOUT GUARANTEE. WE SELL FOR OUR CUSTOMER EX LOCATION, NEARBY BODENSEE IN SOUTH GERMANY MACHINE CAN BE VISITED AT CURRENT LOCATION SUBJECT TO PRIOR SALE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 550 €
Ubicación: Land-weight approx.: 80 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 400 mm<br/>description: large amount of milling tools, mainly used and sharpened, 15 hsk-63-f tool holders equipped with tools, 1 double-sided milling unit homag, various collets, tool cabinet WEIGHT APPROX.: 80 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 400 MM
DESCRIPTION: LARGE AMOUNT OF MILLING TOOLS, MAINLY USED AND SHARPENED, 15 HSK-63-F TOOL HOLDERS EQUIPPED WITH TOOLS, 1 DOUBLE-SIDED MILLING UNIT HOMAG, VARIOUS COLLETS, TOOL CABINET
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand electrolytic finishing plant – galvanasing line
the production line  is coated with fine strip with a zinc / nickel alloy neuralyt (11% nickel in the layer) or a pure zinc coating (elo zinc).
the coated strip in this way are mainly used in the automotive industry as a corrosion-resistant sheet.
mfc.:	andritz, stromag, h&b, aeg		built:	1983, 1985, 1988, 1989
one-sided & two-sided differential coating
neuralyt – zinc / nickel 	89% / 11%	0 – 55 g/m²
strip width:  	600 – 1575 mm	thickness:	0.3 – 2.5 mm
strip length in the line at neuralyt coating:	approx. 430 m
stock strip loop tower i at 8 strands		max. 56 m
stock strip loop tower ii at 6 strands		max. 43 m
coil weight:	max. 25 t  de-coiler 1 & 2 id: 508 – 610 mmcoiler 1 & 2 id: 610 mm
	coiler & de-coiler od:	1850 mm
roll length:	1750 mm	roll dia.:  guide rolls, s-rolls: 610 mm  
auxiliary roll: 254 mm
strip tensions:		de-coiler part:	2 000 – 10 000 n	loop tower i:  4 000 – 12 500 n
	treatment part:  5 000 – 35 000 n	loop tower ii: 4 000 – 2 500 n
	coil part:	5 000 – 45 000 n
strip speed:	de-coil part:  100 m/min. 	treatment part: 90 m/min.  	
coil part: 100 m/min.
lifting and lowering speed:	loop tower i:  15 m/min.  loop tower ii:  15 m/min.
acceleration speed:	de-coil part: 4 sec.	loop tower i:  4 sec.	
treatment part: 8 sec.
	loop tower ii:  4 sec.		coil part:  4 sec.
scope of supply:  de-coil part	alkaline cleaning (degreasing)	rinsing process
	pickling	rinsing after pickling		treatment part (15 tanks)
	rinsing after treatment process	brushing	dryer		oiling 
	activation	phosphating	rinsing after phosphating	
sedi plant (filter)
	chemical water process (osw)	water treatment (sko)	finishing part
 QTY. 1 SECOND-HAND ELECTROLYTIC FINISHING PLANT – GALVANASING LINE THE PRODUCTION LINE IS COATED WITH FINE STRIP WITH A ZINC / NICKEL ALLOY NEURALYT (11% NICKEL IN THE LAYER) OR A PURE ZINC COATING (ELO ZINC). THE COATED STRIP IN THIS WAY ARE MAINLY USED IN THE AUTOMOTIVE INDUSTRY AS A CORROSION-RESISTANT SHEET. MFC.: ANDRITZ, STROMAG, H&B, AEG BUILT: 1983, 1985, 1988, 1989 ONE-SIDED & TWO-SIDED DIFFERENTIAL COATING NEURALYT – ZINC / NICKEL 89% / 11% 0 – 55 G/M² STRIP WIDTH: 600 – 1575 MM THICKNESS: 0.3 – 2.5 MM STRIP LENGTH IN THE LINE AT NEURALYT COATING: APPROX. 430 M STOCK STRIP LOOP TOWER I AT 8 STRANDS MAX. 56 M STOCK STRIP LOOP TOWER II AT 6 STRANDS MAX. 43 M COIL WEIGHT: MAX. 25 T DE-COILER 1 & 2 ID: 508 – 610 MMCOILER 1 & 2 ID: 610 MM COILER & DE-COILER OD: 1850 MM ROLL LENGTH: 1750 MM ROLL DIA.: GUIDE ROLLS, S-ROLLS: 610 MM AUXILIARY ROLL: 254 MM STRIP TENSIONS: DE-COILER PART: 2 000 – 10 000 N LOOP TOWER I: 4 000 – 12 500 N TREATMENT PART: 5 000 – 35 000 N LOOP TOWER II: 4 000 – 2 500 N COIL PART: 5 000 – 45 000 N STRIP SPEED: DE-COIL PART: 100 M/MIN. TREATMENT PART: 90 M/MIN. COIL PART: 100 M/MIN. LIFTING AND LOWERING SPEED: LOOP TOWER I: 15 M/MIN. LOOP TOWER II: 15 M/MIN. ACCELERATION SPEED: DE-COIL PART: 4 SEC. LOOP TOWER I: 4 SEC. TREATMENT PART: 8 SEC. LOOP TOWER II: 4 SEC. COIL PART: 4 SEC. SCOPE OF SUPPLY: DE-COIL PART ALKALINE CLEANING (DEGREASING) RINSING PROCESS PICKLING RINSING AFTER PICKLING TREATMENT PART (15 TANKS) RINSING AFTER TREATMENT PROCESS BRUSHING DRYER OILING ACTIVATION PHOSPHATING RINSING AFTER PHOSPHATING SEDI PLANT (FILTER) CHEMICAL WATER PROCESS (OSW) WATER TREATMENT (SKO) FINISHING PART
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-edge banding machine with modern zero-joint technology for standard edge materials with functional layer\r\n\r\nsingle sided edge banding machine\r\nbrand: homag\r\ntype: optimat kal 310/8/a20/s2\r\nyear: 2007\r\nstop on the left hand side\r\nwith workpiece return\r\n\r\ntechnical data:\r\n- feed 18 m/min\r\n- working height 950 mm\r\n- working width min.:\r\n55mm at workpiece thickness 22 mm, 100 mm at workpiece thickness 60 mm\r\n(depending on the workpiece length)\r\n- workpiece overhang 30 mm\r\n- workpiece thickness 12-60 mm\r\n- edge material coil 0,3-3 mm\r\n- edge cross sectional area max. at pvc 135 mm², at veneer 100 mm²\r\n- coil-Ø max. 830 mm\r\n\r\ntransport chain 80 m wide with rubbered top\r\ntop pressure with v-belt, motorical height adjustment and digital display\r\n\r\npower control pc22 with sps-control\r\n\r\npre-milling unit\r\n- 2 motors each 3 kw\r\n\r\nworkpiece pre-heating\r\n\r\nedge gluing: \r\nhot-air-system\r\nbrand: schugoma \r\ntype: kantenking \r\n- for edge material with functional layer \r\n- functional or reacting layer same colour as the edge material \r\n- dissolved the functional or reacting layer connects edge material and workpiece\r\n\r\nautom. adjusment of pressure zone\r\n1 driven pre-pressure roller, Ø 150 mm\r\n6 post-pressure roller, Ø 70 mm\r\n\r\nedge magazine 6 rollen\r\n- edge thickness 6x3 mm\r\n- coil-Ø 6x830\r\n- rest length monitoring at 2400 mm\r\n\r\nend trimming unit hl 04 / 05\r\nfor workpieces with surface layer overhang up to max. 10 mm\r\n\r\nfeed stepless controllable 18-25 m/min\r\n\r\nsliding table 500x1600 mm\r\n\r\nrough milling unit 1,5 kw\r\n- 2 motors each 1,5 kw, one above the other \r\n\r\nform milling unit fk 13, 8-fold automatical\r\n- 2 motors each 0,4 kw\r\n\r\n600 mm empty space\r\n\r\nmulti-post-cleaning device mn21 automatical\r\n\r\nfinish unit fa11 top / bottom\r\n- post-cleaning glued joint\r\n- cleaning agent application\r\n- buffing unit\r\n\r\nset up during the transport of the next workpiece, so the machine need not to be driven until there are no workpieces in it.\r\n\r\nworkpiece return:\r\nair cushion table: 2500 mm long, 1000 mm wide about approx. 60 mm inclined positioned\r\ntransport belt: wide 900 mm\r\nnot driven roller conveyor: length 2000 mm, width 900 mm\r\nextension of roller conveyor about 500 mm\r\noverhang: approx. 250 mm\r\n\r\nbelt cleaning, single-fold\r\n\r\nworkpieces:\r\nlength 300-2500 mm or. 300-800 mm\r\nwidth 60-800 mm or. 800-2000 mm\r\nthickness 8-60 mm\r\nweight max. 50 kg\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. data are for information and are not binding. EDGE BANDING MACHINE WITH MODERN ZERO-JOINT TECHNOLOGY FOR STANDARD EDGE MATERIALS WITH FUNCTIONAL LAYER\R\N\R\NSINGLE SIDED EDGE BANDING MACHINE\R\NBRAND: HOMAG\R\NTYPE: OPTIMAT KAL 310/8/A20/S2\R\NYEAR: 2007\R\NSTOP ON THE LEFT HAND SIDE\R\NWITH WORKPIECE RETURN\R\N\R\NTECHNICAL DATA:\R\N- FEED 18 M/MIN\R\N- WORKING HEIGHT 950 MM\R\N- WORKING WIDTH MIN.:\R\N55MM AT WORKPIECE THICKNESS 22 MM, 100 MM AT WORKPIECE THICKNESS 60 MM\R\N(DEPENDING ON THE WORKPIECE LENGTH)\R\N- WORKPIECE OVERHANG 30 MM\R\N- WORKPIECE THICKNESS 12-60 MM\R\N- EDGE MATERIAL COIL 0,3-3 MM\R\N- EDGE CROSS SECTIONAL AREA MAX. AT PVC 135 MM², AT VENEER 100 MM²\R\N- COIL-Ø MAX. 830 MM\R\N\R\NTRANSPORT CHAIN 80 M WIDE WITH RUBBERED TOP\R\NTOP PRESSURE WITH V-BELT, MOTORICAL HEIGHT ADJUSTMENT AND DIGITAL DISPLAY\R\N\R\NPOWER CONTROL PC22 WITH SPS-CONTROL\R\N\R\NPRE-MILLING UNIT\R\N- 2 MOTORS EACH 3 KW\R\N\R\NWORKPIECE PRE-HEATING\R\N\R\NEDGE GLUING: \R\NHOT-AIR-SYSTEM\R\NBRAND: SCHUGOMA \R\NTYPE: KANTENKING \R\N- FOR EDGE MATERIAL WITH FUNCTIONAL LAYER \R\N- FUNCTIONAL OR REACTING LAYER SAME COLOUR AS THE EDGE MATERIAL \R\N- DISSOLVED THE FUNCTIONAL OR REACTING LAYER CONNECTS EDGE MATERIAL AND WORKPIECE\R\N\R\NAUTOM. ADJUSMENT OF PRESSURE ZONE\R\N1 DRIVEN PRE-PRESSURE ROLLER, Ø 150 MM\R\N6 POST-PRESSURE ROLLER, Ø 70 MM\R\N\R\NEDGE MAGAZINE 6 ROLLEN\R\N- EDGE THICKNESS 6X3 MM\R\N- COIL-Ø 6X830\R\N- REST LENGTH MONITORING AT 2400 MM\R\N\R\NEND TRIMMING UNIT HL 04 / 05\R\NFOR WORKPIECES WITH SURFACE LAYER OVERHANG UP TO MAX. 10 MM\R\N\R\NFEED STEPLESS CONTROLLABLE 18-25 M/MIN\R\N\R\NSLIDING TABLE 500X1600 MM\R\N\R\NROUGH MILLING UNIT 1,5 KW\R\N- 2 MOTORS EACH 1,5 KW, ONE ABOVE THE OTHER \R\N\R\NFORM MILLING UNIT FK 13, 8-FOLD AUTOMATICAL\R\N- 2 MOTORS EACH 0,4 KW\R\N\R\N600 MM EMPTY SPACE\R\N\R\NMULTI-POST-CLEANING DEVICE MN21 AUTOMATICAL\R\N\R\NFINISH UNIT FA11 TOP / BOTTOM\R\N- POST-CLEANING GLUED JOINT\R\N- CLEANING AGENT APPLICATION\R\N- BUFFING UNIT\R\N\R\NSET UP DURING THE TRANSPORT OF THE NEXT WORKPIECE, SO THE MACHINE NEED NOT TO BE DRIVEN UNTIL THERE ARE NO WORKPIECES IN IT.\R\N\R\NWORKPIECE RETURN:\R\NAIR CUSHION TABLE: 2500 MM LONG, 1000 MM WIDE ABOUT APPROX. 60 MM INCLINED POSITIONED\R\NTRANSPORT BELT: WIDE 900 MM\R\NNOT DRIVEN ROLLER CONVEYOR: LENGTH 2000 MM, WIDTH 900 MM\R\NEXTENSION OF ROLLER CONVEYOR ABOUT 500 MM\R\NOVERHANG: APPROX. 250 MM\R\N\R\NBELT CLEANING, SINGLE-FOLD\R\N\R\NWORKPIECES:\R\NLENGTH 300-2500 MM OR. 300-800 MM\R\NWIDTH 60-800 MM OR. 800-2000 MM\R\NTHICKNESS 8-60 MM\R\NWEIGHT MAX. 50 KG\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATA ARE FOR INFORMATION AND ARE NOT BINDING.
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-in good technical condition.
production in 2012.
1640 x 2600mm t slot table
spindle 5600w, 2400 u / min. er
cooling system with vortex tube (6.8 m3 / h), muffler.
three-phase inverter, key bits
the laser sampling probe contains an optical probe IN GOOD TECHNICAL CONDITION. PRODUCTION IN 2012. 1640 X 2600MM T SLOT TABLE SPINDLE 5600W, 2400 U / MIN. ER COOLING SYSTEM WITH VORTEX TUBE (6.8 M3 / H), MUFFLER. THREE-PHASE INVERTER, KEY BITS THE LASER SAMPLING PROBE CONTAINS AN OPTICAL PROBE
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-amtec fillingmachine fully automatic desktop tablet counting machine 1-100<br><br>small compact desktop counting machine, stainless steel (ss304) version. counting 1-100 pcs into bottles, cans, etc. operation through elektromagnetic vibration: tablets are falling into the counting plate which then turns and release the required number of tablets to the outfeed into the bottle or other container. by changing the counting plates the size and number of tablets can be changed. low noise and easy operation. - specification: speed: max. 20 fillings/min | 220v, 180w | machine dimensions: l600xw500xh700mm | weight: 50kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FILLINGMACHINE FULLY AUTOMATIC DESKTOP TABLET COUNTING MACHINE 1-100

SMALL COMPACT DESKTOP COUNTING MACHINE, STAINLESS STEEL (SS304) VERSION. COUNTING 1-100 PCS INTO BOTTLES, CANS, ETC. OPERATION THROUGH ELEKTROMAGNETIC VIBRATION: TABLETS ARE FALLING INTO THE COUNTING PLATE WHICH THEN TURNS AND RELEASE THE REQUIRED NUMBER OF TABLETS TO THE OUTFEED INTO THE BOTTLE OR OTHER CONTAINER. BY CHANGING THE COUNTING PLATES THE SIZE AND NUMBER OF TABLETS CAN BE CHANGED. LOW NOISE AND EASY OPERATION. - SPECIFICATION: SPEED: MAX. 20 FILLINGS/MIN | 220V, 180W | MACHINE DIMENSIONS: L600XW500XH700MM | WEIGHT: 50KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-
no. 04125

used edge banding homag kr 79/qe/s2/1

bj. 2000, functional

machine is equipped with the following systems:

-pre scribing / before milling (momentary)
-add counter and tracking usage function
-exhaust nozzle
-verleim unit with postforming function (edge can be pushed to the rounding) and normal verleim function (rolls, stripes, solid edges)
-flush milling up/down (spring return)
-bevel up/down (spring return, angle adjustable)
-round up/down (spring return, angle adjustable)
-multi function milling 1 (spring return, angle adjustable)
-multi function milling 2 (spring return, angle adjustable)
-sanding unit with postforming function, the upper fillet can with be sanded.
-buffing unit (can be used also with grinding hedgehog)

the machine has a size of approx. 9.4 x 1.5 m (without infeed fence)
proper function

last major maintenance about 5 years ago (from the fa homag overhaul) including exchange of all chains coverings

used machinery and equipment without further warranty.
technical data, year of manufacture and condition no warranty! bought as visited!
subject to prior sale

terms of delivery: from location close to stuttgart

our general terms and conditions apply, see in the 
 NO. 04125 USED EDGE BANDING HOMAG KR 79/QE/S2/1 BJ. 2000, FUNCTIONAL MACHINE IS EQUIPPED WITH THE FOLLOWING SYSTEMS: -PRE SCRIBING / BEFORE MILLING (MOMENTARY) -ADD COUNTER AND TRACKING USAGE FUNCTION -EXHAUST NOZZLE -VERLEIM UNIT WITH POSTFORMING FUNCTION (EDGE CAN BE PUSHED TO THE ROUNDING) AND NORMAL VERLEIM FUNCTION (ROLLS, STRIPES, SOLID EDGES) -FLUSH MILLING UP/DOWN (SPRING RETURN) -BEVEL UP/DOWN (SPRING RETURN, ANGLE ADJUSTABLE) -ROUND UP/DOWN (SPRING RETURN, ANGLE ADJUSTABLE) -MULTI FUNCTION MILLING 1 (SPRING RETURN, ANGLE ADJUSTABLE) -MULTI FUNCTION MILLING 2 (SPRING RETURN, ANGLE ADJUSTABLE) -SANDING UNIT WITH POSTFORMING FUNCTION, THE UPPER FILLET CAN WITH BE SANDED. -BUFFING UNIT (CAN BE USED ALSO WITH GRINDING HEDGEHOG) THE MACHINE HAS A SIZE OF APPROX. 9.4 X 1.5 M (WITHOUT INFEED FENCE) PROPER FUNCTION LAST MAJOR MAINTENANCE ABOUT 5 YEARS AGO (FROM THE FA HOMAG OVERHAUL) INCLUDING EXCHANGE OF ALL CHAINS COVERINGS USED MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. TECHNICAL DATA, YEAR OF MANUFACTURE AND CONDITION NO WARRANTY! BOUGHT AS VISITED! SUBJECT TO PRIOR SALE TERMS OF DELIVERY: FROM LOCATION CLOSE TO STUTTGART OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: 84.500 EU€
Ubicación: Land-four-axis numerical center by weeke model venture 108m from the homag group. the machine is in very good condition, in constant use. the ability to watch and check. the first owner, full documentation. FOUR-AXIS NUMERICAL CENTER BY WEEKE MODEL VENTURE 108M FROM THE HOMAG GROUP. THE MACHINE IS IN VERY GOOD CONDITION, IN CONSTANT USE. THE ABILITY TO WATCH AND CHECK. THE FIRST OWNER, FULL DOCUMENTATION.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-salam
we sale a comag handle applicator inn verry good condition characteristics: handle applicator machine for easy  speed of up to 45 packages per minute, automatic machine for the application of self-adhesive handles in a variety of grouped products.   SALAM WE SALE A COMAG HANDLE APPLICATOR INN VERRY GOOD CONDITION CHARACTERISTICS: HANDLE APPLICATOR MACHINE FOR EASY SPEED OF UP TO 45 PACKAGES PER MINUTE, AUTOMATIC MACHINE FOR THE APPLICATION OF SELF-ADHESIVE HANDLES IN A VARIETY OF GROUPED PRODUCTS.
Vendedor: LPFC SRL
Año de construcción: usado
Precio: 5.500 €
Ubicación: Land-working lenght: 4400 mm<br/>working lenght: 4400 mm<br/>volt: 400 v<br/><br/><br/><br/><br/> WORKING LENGHT: 4400 MM
WORKING LENGHT: 4400 MM
VOLT: 400 V




Vendedor: Rauscher & Reyhing GmbH
Año de construcción: usado
Ubicación: Land-hand fed platen ml, 1040 ref 2069eu
max format-1040 x 720 mm
electromagnetic clutch and brake  HAND FED PLATEN ML, 1040 REF 2069EU MAX FORMAT-1040 X 720 MM ELECTROMAGNETIC CLUTCH AND BRAKE
Vendedor: TOP GRAPHIC MACHINERY
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 15 kg<br/>dimensions (l x w x h) approx.: 250 x 250 x 200 mm<br/>description: - max. loading capacity: 500 kg WEIGHT APPROX.: 15 KG
DIMENSIONS (L X W X H) APPROX.: 250 X 250 X 200 MM
DESCRIPTION: - MAX. LOADING CAPACITY: 500 KG
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-electromagnetic floor mm. 600x300 with dresser on wheel
complete control of hydraulic
filter paper
operating range 610x305x620
dimensions 2950 x 1730 x 2080 mm
weight 2200 kg ELECTROMAGNETIC FLOOR MM. 600X300 WITH DRESSER ON WHEEL COMPLETE CONTROL OF HYDRAULIC FILTER PAPER OPERATING RANGE 610X305X620 DIMENSIONS 2950 X 1730 X 2080 MM WEIGHT 2200 KG
Vendedor: Industrialbay
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 15 kg<br/>dimensions (l x w x h) approx.: 250 x 250 x 200 mm<br/>description: - max. loading capacity: 500 kg WEIGHT APPROX.: 15 KG
DIMENSIONS (L X W X H) APPROX.: 250 X 250 X 200 MM
DESCRIPTION: - MAX. LOADING CAPACITY: 500 KG
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-edgebander homag kdf 540 gc
manufacturer homag
model / type of kdf 540 gc machine
year of production 2007
machine category. one-sided edgebander
location

gorzów wlkp.
conditions of delivery

own receipt
cost of delivery

customer cover
start type

to be agreed
description
comments

basic information:
EDGEBANDER HOMAG KDF 540 GC MANUFACTURER HOMAG MODEL / TYPE OF KDF 540 GC MACHINE YEAR OF PRODUCTION 2007 MACHINE CATEGORY. ONE-SIDED EDGEBANDER LOCATION GORZóW WLKP. CONDITIONS OF DELIVERY OWN RECEIPT COST OF DELIVERY CUSTOMER COVER START TYPE TO BE AGREED DESCRIPTION COMMENTS BASIC INFORMATION: "THICKNESS OF THE EDGE - 0.4-8 MM "CUTTING OFF THE ROLL MAX. 3 X 45 MM "THICKNESS OF ELEMENTS - 8-50 MM "FEED - ABOUT 11 M / MIN "WORKING PRESSURE - 6 BAR "INSTALLED POWER APPROX. 12.5 KW "MACHINE LENGTH - 5.360 MM PRE-MILLING AGGREGATE 2X2,2 KW TWO CONCURRENT AND COUNTER-ROTATING ENGINES (TWO HEADS 100X48X30 MM) AGGREGAT OKUJAJ?CY AGGREGATE CUTTING OFF THE EDGE (KóWKI) 2 MOTORS EACH 0.18 KW 2 SAWS 100X32X2,6 Z = 30 MILLING AGGREGATE - UP (COLLECTS EXCESS MARGINS) 2 X 0.55 KW COUNTER-ROTATING BF 6240 MILLING AGGREGATE - DOWN UNIVERSAL MILLING UNIT NOISE AGGREGATE 30 MM 1 X 1.85 KW AGGREGATE ROUNDING UP / DOWN 1 X 0.35 KW FF6210 CYKLINA FLAT TROUGH FOR GLUE GROUT + APPLICATION OF CLEANING AGENT + POLISHING AGGREGATE
Vendedor: PPHU Lignum Przemysław Kretowicz
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 15 kg<br/>dimensions (l x w x h) approx.: 250 x 250 x 200 mm<br/>description: - max. loading capacity: 500 kg WEIGHT APPROX.: 15 KG
DIMENSIONS (L X W X H) APPROX.: 250 X 250 X 200 MM
DESCRIPTION: - MAX. LOADING CAPACITY: 500 KG
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.200 €
Ubicación: Land-mobile electromagnetic chuck for grinding or milling magnetic force steplessly adjustable degaussing clamping surface: 450 x 300 mm MOBILE ELECTROMAGNETIC CHUCK FOR GRINDING OR MILLING MAGNETIC FORCE STEPLESSLY ADJUSTABLE DEGAUSSING CLAMPING SURFACE: 450 X 300 MM
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 15 kg<br/>dimensions (l x w x h) approx.: 250 x 250 x 200 mm<br/>description: - max. loading capacity: 500 kg WEIGHT APPROX.: 15 KG
DIMENSIONS (L X W X H) APPROX.: 250 X 250 X 200 MM
DESCRIPTION: - MAX. LOADING CAPACITY: 500 KG
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-one page edge banding machine, right version
to glue height max. 60 mm thickness 0.4-20 mm cap scissors up to thickness 3 mm glue system roller above the glue pot 8 l aggregates: gluing, pneumatic cap scissors, doppelkappsaege, before milling, precision milling, schleifagregat
magazine plate for role and bar legal machine sliding chain top pressure with compound v-belt 70 mm wide upper pressure setting manually with siko meter 4-roller pressure zone trimming unit with 2 motors levelling milling unit with 2 motors of up and down groping shankar raesaggregat with 2 motors from the top and sides groping schleifmagregat oscillation
feed gear adjustable roller rail frequency converter 165 volt, 300 hz hf motors 165 volt, 18000 rpm length approx. 5230 mm depth approx. 1100 mm weight 2900 kg

ONE PAGE EDGE BANDING MACHINE, RIGHT VERSION TO GLUE HEIGHT MAX. 60 MM THICKNESS 0.4-20 MM CAP SCISSORS UP TO THICKNESS 3 MM GLUE SYSTEM ROLLER ABOVE THE GLUE POT 8 L AGGREGATES: GLUING, PNEUMATIC CAP SCISSORS, DOPPELKAPPSAEGE, BEFORE MILLING, PRECISION MILLING, SCHLEIFAGREGAT MAGAZINE PLATE FOR ROLE AND BAR LEGAL MACHINE SLIDING CHAIN TOP PRESSURE WITH COMPOUND V-BELT 70 MM WIDE UPPER PRESSURE SETTING MANUALLY WITH SIKO METER 4-ROLLER PRESSURE ZONE TRIMMING UNIT WITH 2 MOTORS LEVELLING MILLING UNIT WITH 2 MOTORS OF UP AND DOWN GROPING SHANKAR RAESAGGREGAT WITH 2 MOTORS FROM THE TOP AND SIDES GROPING SCHLEIFMAGREGAT OSCILLATION FEED GEAR ADJUSTABLE ROLLER RAIL FREQUENCY CONVERTER 165 VOLT, 300 HZ HF MOTORS 165 VOLT, 18000 RPM LENGTH APPROX. 5230 MM DEPTH APPROX. 1100 MM WEIGHT 2900 KG
Vendedor: Dematech s.r.o
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 15 kg<br/>dimensions (l x w x h) approx.: 250 x 250 x 200 mm<br/>description: - max. loading capacity: 500 kg WEIGHT APPROX.: 15 KG
DIMENSIONS (L X W X H) APPROX.: 250 X 250 X 200 MM
DESCRIPTION: - MAX. LOADING CAPACITY: 500 KG
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more OMAG types: