750 ofertas

Año de construcción: usado
Ubicación: Land-comessa 
machine name  shearing machine
manufacturer  comessa 
model  na
location  mumbai
year of manufacturing na
technical specification 
maximum thickness 10 mm (ms)
maximum length 3000 mm (ms)
 
 COMESSA MACHINE NAME SHEARING MACHINE MANUFACTURER COMESSA MODEL NA LOCATION MUMBAI YEAR OF MANUFACTURING NA TECHNICAL SPECIFICATION MAXIMUM THICKNESS 10 MM (MS) MAXIMUM LENGTH 3000 MM (MS)
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer bollegraaf<br/>typ hbc 80 ak<br/>year of construction 1997<br/>stand  02/2019 operating hours counter 42,555 hours, the counter was probably replaced, the machine has run more hours, exact status not known.<br/>press power main press 78 tons<br/>press power of pre-press 45 tons<br/>feed channel 1,500 x 1,100 mm<br/>filling volume 2.9 m³<br/>theoretic cycle time 22 sec.<br/>throughput rate under operating conditions 300 up to 450 m³/hour<br/>bale size 1,100 x 720 mm, length variable<br/>driving motor 45 kw<br/>tying system 5-fold vertical, 3-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx. 10 tons/hour<br/>bulk weight of 50 kg/cbm  approx. 18 tons/hour<br/>bulk weight of 100 kg/cbm  approx. 30 tons/hour<br/>throughput rate with ruffler  approx. 20 tons/hour<br/>bale weight 550 up to 850 kg, depends on material<br/>volume hydraulic oil tank 900 l<br/>sps controller (manuf., type) siemens s5-100 u<br/>operating panel (manuf., type)  siemens simatic op7 <br/>transport dimensions only baler 10,690 x 2,320 x 3,150 mm (l x w x h)<br/>machine weight baler approx. 26 tons<br/><br/>condition of the baler:<br/>the press comes from a production plant, was regularly maintained and repaired. in 2017 were invested 32.000,- ? and in 2018 more than 48.000,- ?  in the maintenance and repair of the machine.<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER BOLLEGRAAF
TYP HBC 80 AK
YEAR OF CONSTRUCTION 1997
STAND 02/2019 OPERATING HOURS COUNTER 42,555 HOURS, THE COUNTER WAS PROBABLY REPLACED, THE MACHINE HAS RUN MORE HOURS, EXACT STATUS NOT KNOWN.
PRESS POWER MAIN PRESS 78 TONS
PRESS POWER OF PRE-PRESS 45 TONS
FEED CHANNEL 1,500 X 1,100 MM
FILLING VOLUME 2.9 M³
THEORETIC CYCLE TIME 22 SEC.
THROUGHPUT RATE UNDER OPERATING CONDITIONS 300 UP TO 450 M³/HOUR
BALE SIZE 1,100 X 720 MM, LENGTH VARIABLE
DRIVING MOTOR 45 KW
TYING SYSTEM 5-FOLD VERTICAL, 3-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 10 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM APPROX. 18 TONS/HOUR
BULK WEIGHT OF 100 KG/CBM APPROX. 30 TONS/HOUR
THROUGHPUT RATE WITH RUFFLER APPROX. 20 TONS/HOUR
BALE WEIGHT 550 UP TO 850 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 900 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS S5-100 U
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC OP7
TRANSPORT DIMENSIONS ONLY BALER 10,690 X 2,320 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 26 TONS

CONDITION OF THE BALER:
THE PRESS COMES FROM A PRODUCTION PLANT, WAS REGULARLY MAINTAINED AND REPAIRED. IN 2017 WERE INVESTED 32.000,- ? AND IN 2018 MORE THAN 48.000,- ? IN THE MAINTENANCE AND REPAIR OF THE MACHINE.

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 500 €
Ubicación: Land-year built: approx 1998
const..: approx. 300 bar
weight: 350 kg

other: the hydraulic unit comes from a coordenades - stamping & punching machine trumpf tc 240

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
every interested party can advance test under power the hydraulic power pack.
 YEAR BUILT: APPROX 1998 CONST..: APPROX. 300 BAR WEIGHT: 350 KG OTHER: THE HYDRAULIC UNIT COMES FROM A COORDENADES - STAMPING & PUNCHING MACHINE TRUMPF TC 240 ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EVERY INTERESTED PARTY CAN ADVANCE TEST UNDER POWER THE HYDRAULIC POWER PACK.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-technical data bunker chain belt conveyor<br/>manufacturer bollegraaf<br/>typ hbt 600/1000<br/>year of construction 1999<br/>driving motor 0,22 up to 0,9 kw<br/>belt speed 1,4 m/sec.<br/>bunker volume approx. 21 m³<br/>length feeding conveyor 10,940 mm<br/>effecting width 990 mm<br/>height of side wall feeding conv. 1,960 mm<br/>transport dimensions over all 1,.950 x 1,600 x 2,650<br/>weight approx. 7,700 kg<br/><br/>remarks:<br/>the bunker belt comes from a paper sorting plant, shows very little wear and tear and is in a really good condition. there are currently 3 pieces of bunker belts for sale. a inspection is possible by appointment. we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BUNKER CHAIN BELT CONVEYOR
MANUFACTURER BOLLEGRAAF
TYP HBT 600/1000
YEAR OF CONSTRUCTION 1999
DRIVING MOTOR 0,22 UP TO 0,9 KW
BELT SPEED 1,4 M/SEC.
BUNKER VOLUME APPROX. 21 M³
LENGTH FEEDING CONVEYOR 10,940 MM
EFFECTING WIDTH 990 MM
HEIGHT OF SIDE WALL FEEDING CONV. 1,960 MM
TRANSPORT DIMENSIONS OVER ALL 1,.950 X 1,600 X 2,650
WEIGHT APPROX. 7,700 KG

REMARKS:
THE BUNKER BELT COMES FROM A PAPER SORTING PLANT, SHOWS VERY LITTLE WEAR AND TEAR AND IS IN A REALLY GOOD CONDITION. THERE ARE CURRENTLY 3 PIECES OF BUNKER BELTS FOR SALE. A INSPECTION IS POSSIBLE BY APPOINTMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 9.250 €
Ubicación: Land-core d20a, lathe comes from a training workshop (total 3 machines are available of this type) state very well, with
guard / not cleaned off and glass scales and digital display of mitutoyo, central lubrication system, guided tours and refinished, dovetail guides at the flat after scraped, set games.
mechanics tested new, paint, chip wall back, chip tray below, guard with emergency off, tailstock, 3 jaw chuck, little water, chuck key, lighting
tip height 200 mm, centre distance 1000 mm, max.drehdurchmesser 600 mm, over bed 420 mm, over carriage bed width 260 mm, 300 mm,.
sale only to professionals
used, tested - so how you is, can be tested under power and visited
under exclusion of any warranty and guarantee there second-hand machine

free loading on trucks from location, shipment arrangement, placement and set up on request possible
available immediately CORE D20A, LATHE COMES FROM A TRAINING WORKSHOP (TOTAL 3 MACHINES ARE AVAILABLE OF THIS TYPE) STATE VERY WELL, WITH GUARD / NOT CLEANED OFF AND GLASS SCALES AND DIGITAL DISPLAY OF MITUTOYO, CENTRAL LUBRICATION SYSTEM, GUIDED TOURS AND REFINISHED, DOVETAIL GUIDES AT THE FLAT AFTER SCRAPED, SET GAMES. MECHANICS TESTED NEW, PAINT, CHIP WALL BACK, CHIP TRAY BELOW, GUARD WITH EMERGENCY OFF, TAILSTOCK, 3 JAW CHUCK, LITTLE WATER, CHUCK KEY, LIGHTING TIP HEIGHT 200 MM, CENTRE DISTANCE 1000 MM, MAX.DREHDURCHMESSER 600 MM, OVER BED 420 MM, OVER CARRIAGE BED WIDTH 260 MM, 300 MM,. SALE ONLY TO PROFESSIONALS USED, TESTED - SO HOW YOU IS, CAN BE TESTED UNDER POWER AND VISITED UNDER EXCLUSION OF ANY WARRANTY AND GUARANTEE THERE SECOND-HAND MACHINE FREE LOADING ON TRUCKS FROM LOCATION, SHIPMENT ARRANGEMENT, PLACEMENT AND SET UP ON REQUEST POSSIBLE AVAILABLE IMMEDIATELY
Vendedor: R.S.E cnc Maschinenservice
Año de construcción: usado
Ubicación: Land-x-travel: 300 mm<br/>y-travel: 150 mm<br/>z-travel: 300 mm<br/>table surface area: 600 x 210 mm<br/>table tiltable and swivelling +/-: 40 grad<br/>milling head -swivable +/-: 40 °<br/>tool taper: mk4 <br/>turning speed range: 60 - 1900 u/min<br/>feeds - longitudinal: 0- 475 mm/min<br/>electrics - voltage/frequency: 380/50 v/hz<br/>total power requirement: 1,90 kw<br/>weight of the machine ca.: 0,70 t<br/>machine comes with tiltable table<br/>device for horizontal milling (no arbor),<br/>several mk4 toolholders, vice. <br/><br/><br/><br/><br/> X-TRAVEL: 300 MM
Y-TRAVEL: 150 MM
Z-TRAVEL: 300 MM
TABLE SURFACE AREA: 600 X 210 MM
TABLE TILTABLE AND SWIVELLING +/-: 40 GRAD
MILLING HEAD -SWIVABLE +/-: 40 °
TOOL TAPER: MK4
TURNING SPEED RANGE: 60 - 1900 U/MIN
FEEDS - LONGITUDINAL: 0- 475 MM/MIN
ELECTRICS - VOLTAGE/FREQUENCY: 380/50 V/HZ
TOTAL POWER REQUIREMENT: 1,90 KW
WEIGHT OF THE MACHINE CA.: 0,70 T
MACHINE COMES WITH TILTABLE TABLE
DEVICE FOR HORIZONTAL MILLING (NO ARBOR),
SEVERAL MK4 TOOLHOLDERS, VICE.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 12.500 €
Ubicación: Land-this is a platform conveyors, conveyor caps system, inline transport to esterer - mule and then comes the lã¤ngssortieranlage with shedding. THIS IS A PLATFORM CONVEYORS, CONVEYOR CAPS SYSTEM, INLINE TRANSPORT TO ESTERER - MULE AND THEN COMES THE L&ATILDE;&CURREN;NGSSORTIERANLAGE WITH SHEDDING.
Vendedor: Denninger
Año de construcción: usado
Precio: used machinery auction RESALE 3.400 €
Ubicación: Land-weight approx.: 3000 kg<br/>x-travel: 800 mm<br/>y-travel: 500 mm<br/>z-travel: 420 mm<br/>control: heidenhain tnc 407 <br/>dimensions (l x w x h) approx.: 2400 x 3000 x 2200 mm<br/>turning speed range: 25 - 4000 rpm<br/>rapid travel range: 6 m/min<br/>table surface area l x w : 500 x 100 mm<br/>feed range: 5 - 2000 mm/min<br/>tool taper: iso 40 <br/>total power requirement: 7,5 kw<br/>description: avia fne-50n toolroom mill<br> - comes with counter as well as spindle bearings WEIGHT APPROX.: 3000 KG
X-TRAVEL: 800 MM
Y-TRAVEL: 500 MM
Z-TRAVEL: 420 MM
CONTROL: HEIDENHAIN TNC 407
DIMENSIONS (L X W X H) APPROX.: 2400 X 3000 X 2200 MM
TURNING SPEED RANGE: 25 - 4000 RPM
RAPID TRAVEL RANGE: 6 M/MIN
TABLE SURFACE AREA L X W : 500 X 100 MM
FEED RANGE: 5 - 2000 MM/MIN
TOOL TAPER: ISO 40
TOTAL POWER REQUIREMENT: 7,5 KW
DESCRIPTION: AVIA FNE-50N TOOLROOM MILL
- COMES WITH COUNTER AS WELL AS SPINDLE BEARINGS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-3d pipe laser mazak fabri gear 400 ii

the used 3d pipe laser mazak fabri gear 400 ii is in a technically and optically flawless condition and can still be seen under power. 15 m long pipes and profiles can be edited to a shell diameter of 400 mm.

the pipe laser 3d fabri gear 400 mkii is 4kw as new and in top condition with low hours.

facilities:

15m loading and unloading for processing of up to 15 m long profiles/tubes
    tapping unit with 6 thread stops up to m10
    4kw resonator to wall thickness 20 mm fe at 90 â°
    3d cutting head for the processing of tubes / profiles / free form part
    tactile sensor for material scanning
    clamping of the material on both sides of the cutting head for unbeatable precision
    automatic pipe measurement
    automatic profile centering
    non-contact height scanning
    work piece clamping jaws
    documentation
    7.5 'cutting head (non-contact height scanning)
    super high pressure gas pipeline

cutting performance 90â°:

fe up to 20mm
    va up to 10mm
    aluminium up to 8mm

the machine comes with warranty, commissioning + training, software + training offered.
 3D PIPE LASER MAZAK FABRI GEAR 400 II THE USED 3D PIPE LASER MAZAK FABRI GEAR 400 II IS IN A TECHNICALLY AND OPTICALLY FLAWLESS CONDITION AND CAN STILL BE SEEN UNDER POWER. 15 M LONG PIPES AND PROFILES CAN BE EDITED TO A SHELL DIAMETER OF 400 MM. THE PIPE LASER 3D FABRI GEAR 400 MKII IS 4KW AS NEW AND IN TOP CONDITION WITH LOW HOURS. FACILITIES: 15M LOADING AND UNLOADING FOR PROCESSING OF UP TO 15 M LONG PROFILES/TUBES TAPPING UNIT WITH 6 THREAD STOPS UP TO M10 4KW RESONATOR TO WALL THICKNESS 20 MM FE AT 90 &ACIRC;&DEG; 3D CUTTING HEAD FOR THE PROCESSING OF TUBES / PROFILES / FREE FORM PART TACTILE SENSOR FOR MATERIAL SCANNING CLAMPING OF THE MATERIAL ON BOTH SIDES OF THE CUTTING HEAD FOR UNBEATABLE PRECISION AUTOMATIC PIPE MEASUREMENT AUTOMATIC PROFILE CENTERING NON-CONTACT HEIGHT SCANNING WORK PIECE CLAMPING JAWS DOCUMENTATION 7.5 'CUTTING HEAD (NON-CONTACT HEIGHT SCANNING) SUPER HIGH PRESSURE GAS PIPELINE CUTTING PERFORMANCE 90&ACIRC;&DEG;: FE UP TO 20MM VA UP TO 10MM ALUMINIUM UP TO 8MM THE MACHINE COMES WITH WARRANTY, COMMISSIONING + TRAINING, SOFTWARE + TRAINING OFFERED.
Vendedor: H+S Maschinentechnik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 19.900 €
Ubicación: Land-weight approx.: 24000 kg<br/>laser capacity: 2,5 kw<br/>control: primach-9000l (02/2007) <br/>running hours: 36500 (2/2019) h<br/>dimensions (l x w x h) approx.: 10500 x 4200 x 3400 mm<br/>running hours of laser: 32410 (2/2019) h<br/>description: prima industrie rapido 5 3d laser cutting machine<br> - serial no.: 029e484<br> - order no.: r2974<br> - voltage: 400 v<br> - amperage: 97 a<br> - frequency: 50 hz<br> - travel (x): 3200 mm<br> - travel (y): 1500 mm<br> - travel (z): 600 mm<br> - max. cutting dimensions: 3440 x 1765 x 800 mm<br> - max. speed: 50 m/s<br> - rotary axes (a/b): 360°/135°<br> - adapter axis (c): 7,5 mm<br> - comes with torit suction unit, hyfra cooling unit, rofin laser source, two tables as well as documentation<br> - <b>attention: the agreement concerning the collection must take place about three weeks before pickup!!</b> WEIGHT APPROX.: 24000 KG
LASER CAPACITY: 2,5 KW
CONTROL: PRIMACH-9000L (02/2007)
RUNNING HOURS: 36500 (2/2019) H
DIMENSIONS (L X W X H) APPROX.: 10500 X 4200 X 3400 MM
RUNNING HOURS OF LASER: 32410 (2/2019) H
DESCRIPTION: PRIMA INDUSTRIE RAPIDO 5 3D LASER CUTTING MACHINE
- SERIAL NO.: 029E484
- ORDER NO.: R2974
- VOLTAGE: 400 V
- AMPERAGE: 97 A
- FREQUENCY: 50 HZ
- TRAVEL (X): 3200 MM
- TRAVEL (Y): 1500 MM
- TRAVEL (Z): 600 MM
- MAX. CUTTING DIMENSIONS: 3440 X 1765 X 800 MM
- MAX. SPEED: 50 M/S
- ROTARY AXES (A/B): 360°/135°
- ADAPTER AXIS (C): 7,5 MM
- COMES WITH TORIT SUCTION UNIT, HYFRA COOLING UNIT, ROFIN LASER SOURCE, TWO TABLES AS WELL AS DOCUMENTATION
- ATTENTION: THE AGREEMENT CONCERNING THE COLLECTION MUST TAKE PLACE ABOUT THREE WEEKS BEFORE PICKUP!!
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-automatic all around packer krones variopac pfs 45
  
this krones variopac pfs 45 is currently in use, is perfectly maintained and has less than 6500 running hours. it is currently being used for stretch film multipacks only. it comes complete with the infeed table and heating tunnel. the equipment is currently being used for 250ml, 300ml, 350ml and 500 ml. its maximum speed is 45 tact/minute. the equipment is available at the end of q2 of 2016.
 
make: krones / kettner
type: variopac pfs 45
serial: 22/0380/025
manufacturing year 2002
capacity: up to 45 tact / hour
running hours: less than 6.500 hrs
container handling: pet bottles 250, 300, 350 and 500 ml
current package: shrink film only
electricity: 460 v / 60 hz   AUTOMATIC ALL AROUND PACKER KRONES VARIOPAC PFS 45 THIS KRONES VARIOPAC PFS 45 IS CURRENTLY IN USE, IS PERFECTLY MAINTAINED AND HAS LESS THAN 6500 RUNNING HOURS. IT IS CURRENTLY BEING USED FOR STRETCH FILM MULTIPACKS ONLY. IT COMES COMPLETE WITH THE INFEED TABLE AND HEATING TUNNEL. THE EQUIPMENT IS CURRENTLY BEING USED FOR 250ML, 300ML, 350ML AND 500 ML. ITS MAXIMUM SPEED IS 45 TACT/MINUTE. THE EQUIPMENT IS AVAILABLE AT THE END OF Q2 OF 2016. MAKE: KRONES / KETTNER TYPE: VARIOPAC PFS 45 SERIAL: 22/0380/025 MANUFACTURING YEAR 2002 CAPACITY: UP TO 45 TACT / HOUR RUNNING HOURS: LESS THAN 6.500 HRS CONTAINER HANDLING: PET BOTTLES 250, 300, 350 AND 500 ML CURRENT PACKAGE: SHRINK FILM ONLY ELECTRICITY: 460 V / 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 950 €
Ubicación: Land-cnc control, control panel, machining center <br /><br /> control comes from a press brake <br /> manufacturer haemmerle type ap100-2600 <br /> complete unit <br /> dimensions 615/340 / h745 mm <br /> -weight 52 kg CNC CONTROL, CONTROL PANEL, MACHINING CENTER

CONTROL COMES FROM A PRESS BRAKE
MANUFACTURER HAEMMERLE TYPE AP100-2600
COMPLETE UNIT
DIMENSIONS 615/340 / H745 MM
-WEIGHT 52 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-ionized air can rinser trans-tech hysek 120 000 cph
 
this german built trans-tech can rinser with 2x bmh empty can inverters was built and installed in 2011. it is in excellent conditions. it comes with a 180 degree can twister on the top part, the ionized air rinser (with pumps and treatment) and a 180 degree upright twister on the bottom of the rinser. the platform and supports are included. the equipment is installed and in use, and can be inspected in operation.
 
make: trans-tech hysek and bmh feed gear
manufacturing year: 2011
capacity: up to 2.000 can per minute (120 000 cph)
running hours: less than 8.000 hrs
container handling: 8oz – 66mm diameter / 87mm height
350ml – 66 mm diameter / 122 mm height
473ml – 66 mm diameter / 157 mm height
10.5oz – 57 mm diameter / 138 mm heigth
electricity: 460 v / 60 hz   IONIZED AIR CAN RINSER TRANS-TECH HYSEK 120 000 CPH THIS GERMAN BUILT TRANS-TECH CAN RINSER WITH 2X BMH EMPTY CAN INVERTERS WAS BUILT AND INSTALLED IN 2011. IT IS IN EXCELLENT CONDITIONS. IT COMES WITH A 180 DEGREE CAN TWISTER ON THE TOP PART, THE IONIZED AIR RINSER (WITH PUMPS AND TREATMENT) AND A 180 DEGREE UPRIGHT TWISTER ON THE BOTTOM OF THE RINSER. THE PLATFORM AND SUPPORTS ARE INCLUDED. THE EQUIPMENT IS INSTALLED AND IN USE, AND CAN BE INSPECTED IN OPERATION. MAKE: TRANS-TECH HYSEK AND BMH FEED GEAR MANUFACTURING YEAR: 2011 CAPACITY: UP TO 2.000 CAN PER MINUTE (120 000 CPH) RUNNING HOURS: LESS THAN 8.000 HRS CONTAINER HANDLING: 8OZ – 66MM DIAMETER / 87MM HEIGHT 350ML – 66 MM DIAMETER / 122 MM HEIGHT 473ML – 66 MM DIAMETER / 157 MM HEIGHT 10.5OZ – 57 MM DIAMETER / 138 MM HEIGTH ELECTRICITY: 460 V / 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 4000 x 2900 x 3000 mm<br/>description: haas vm-3 vertical machining centre<br> - serial no.: 1121143<br> - read off spindle hours: <b>only 22!</b><br> - travel (x/y/z): 1016/660/635 mm<br> - thurst (x/y/z): approx. 18 kn<br> - rapids (x/y/z): up to 18 m/min<br> - spindle speed: up to 12.000 rpm<br> - table dimensions: 1372 x 635 mm<br> - with t-slots in both x and y directions<br> - max. table load: 1588 kg<br> - taper: sk 40<br> - 24-fold tool changer<br> - max. tool diameter: 76 mm<br> - max. tool length: 279 mm<br> - tool to tool/chip to chip: 2,8 respectively 3,6 sec<br> - with automatic chip conveyor system<br> - with haas cnc control<br> - comes with haas tr 160 2 axis turn and swivel table for full fourth and fifth axis operations (already dismantled according to pictures)<br> - comes with renishaw probe as well as tool measuring device<br> - attention: only wax has been processed on this machine<br> WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 2900 X 3000 MM
DESCRIPTION: HAAS VM-3 VERTICAL MACHINING CENTRE
- SERIAL NO.: 1121143
- READ OFF SPINDLE HOURS: ONLY 22!
- TRAVEL (X/Y/Z): 1016/660/635 MM
- THURST (X/Y/Z): APPROX. 18 KN
- RAPIDS (X/Y/Z): UP TO 18 M/MIN
- SPINDLE SPEED: UP TO 12.000 RPM
- TABLE DIMENSIONS: 1372 X 635 MM
- WITH T-SLOTS IN BOTH X AND Y DIRECTIONS
- MAX. TABLE LOAD: 1588 KG
- TAPER: SK 40
- 24-FOLD TOOL CHANGER
- MAX. TOOL DIAMETER: 76 MM
- MAX. TOOL LENGTH: 279 MM
- TOOL TO TOOL/CHIP TO CHIP: 2,8 RESPECTIVELY 3,6 SEC
- WITH AUTOMATIC CHIP CONVEYOR SYSTEM
- WITH HAAS CNC CONTROL
- COMES WITH HAAS TR 160 2 AXIS TURN AND SWIVEL TABLE FOR FULL FOURTH AND FIFTH AXIS OPERATIONS (ALREADY DISMANTLED ACCORDING TO PICTURES)
- COMES WITH RENISHAW PROBE AS WELL AS TOOL MEASURING DEVICE
- ATTENTION: ONLY WAX HAS BEEN PROCESSED ON THIS MACHINE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-labeler sidel alfa rollquatro f 25 hot melt glue with auxiliaries
 
this alfa rollquatro labeler was installed in 2006 and it was operated time to time till 2014 total operating hours not exceeding 10 000 hours! rollquattro is a rotary wraparound labeler equipped with an ergonomically designed, robust and precise linear labeling station with place for two rolls of film labels. label is attached to bottle with two hot melt glue stripes. label platforms are teethed belt driven via single servo motor. this labeler has hh2 configuration which enables improved flexibility in handling bottles of different sizes and greater reliability for small bottles at very high speeds. labeler is still installed and powered and in good condition. machine comes with videojet label coding printer and metec label inspector.
 
manufacturer sidel alfa inc
labeler type: alfa rollquatro f25 12t/sr/hh2 s1/e1
gluing system hot glue stripes
manufacturing year 2006
capacity 42000 bph
carousel diameter 720 mm
number of labeling stations 18
bottle diameter 53 - 110 mm
pitch 126 mm
label min-max length 177 - 355 mm
electric power 36 kw
in jet coder videojet 1620
label inspector metec promecon 2000   LABELER SIDEL ALFA ROLLQUATRO F 25 HOT MELT GLUE WITH AUXILIARIES THIS ALFA ROLLQUATRO LABELER WAS INSTALLED IN 2006 AND IT WAS OPERATED TIME TO TIME TILL 2014 TOTAL OPERATING HOURS NOT EXCEEDING 10 000 HOURS! ROLLQUATTRO IS A ROTARY WRAPAROUND LABELER EQUIPPED WITH AN ERGONOMICALLY DESIGNED, ROBUST AND PRECISE LINEAR LABELING STATION WITH PLACE FOR TWO ROLLS OF FILM LABELS. LABEL IS ATTACHED TO BOTTLE WITH TWO HOT MELT GLUE STRIPES. LABEL PLATFORMS ARE TEETHED BELT DRIVEN VIA SINGLE SERVO MOTOR. THIS LABELER HAS HH2 CONFIGURATION WHICH ENABLES IMPROVED FLEXIBILITY IN HANDLING BOTTLES OF DIFFERENT SIZES AND GREATER RELIABILITY FOR SMALL BOTTLES AT VERY HIGH SPEEDS. LABELER IS STILL INSTALLED AND POWERED AND IN GOOD CONDITION. MACHINE COMES WITH VIDEOJET LABEL CODING PRINTER AND METEC LABEL INSPECTOR. MANUFACTURER SIDEL ALFA INC LABELER TYPE: ALFA ROLLQUATRO F25 12T/SR/HH2 S1/E1 GLUING SYSTEM HOT GLUE STRIPES MANUFACTURING YEAR 2006 CAPACITY 42000 BPH CAROUSEL DIAMETER 720 MM NUMBER OF LABELING STATIONS 18 BOTTLE DIAMETER 53 - 110 MM PITCH 126 MM LABEL MIN-MAX LENGTH 177 - 355 MM ELECTRIC POWER 36 KW IN JET CODER VIDEOJET 1620 LABEL INSPECTOR METEC PROMECON 2000
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 4000 x 2900 x 3000 mm<br/>description: haas vm-3 vertical machining centre<br> - serial no.: 1124484<br> - read off spindle hours: 2820<br> - travel (x/y/z): 1016/660/635 mm<br> - thurst (x/y/z): approx. 18 kn<br> - rapids (x/y/z): up to 18 m/min<br> - spindle speed: up to 12.000 rpm<br> - table dimensions: 1372 x 635 mm<br> - with t-slots in both x and y directions<br> - max. table load: 1588 kg<br> - taper: sk 40<br> - 24-fold tool changer<br> - max. tool diameter: 76 mm<br> - max. tool length: 279 mm<br> - tool to tool/chip to chip: 2,8 respectively 3,6 sec<br> - with automatic chip conveyor system<br> - with haas cnc control<br> - comes with haas tr 160 2 axis turn and swivel table for full fourth and fifth axis operations (already dismantled according to pictures)<br> - comes with renishaw probe as well as tool measuring device<br> - attention: only wax has been processed on this machine<br> WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 2900 X 3000 MM
DESCRIPTION: HAAS VM-3 VERTICAL MACHINING CENTRE
- SERIAL NO.: 1124484
- READ OFF SPINDLE HOURS: 2820
- TRAVEL (X/Y/Z): 1016/660/635 MM
- THURST (X/Y/Z): APPROX. 18 KN
- RAPIDS (X/Y/Z): UP TO 18 M/MIN
- SPINDLE SPEED: UP TO 12.000 RPM
- TABLE DIMENSIONS: 1372 X 635 MM
- WITH T-SLOTS IN BOTH X AND Y DIRECTIONS
- MAX. TABLE LOAD: 1588 KG
- TAPER: SK 40
- 24-FOLD TOOL CHANGER
- MAX. TOOL DIAMETER: 76 MM
- MAX. TOOL LENGTH: 279 MM
- TOOL TO TOOL/CHIP TO CHIP: 2,8 RESPECTIVELY 3,6 SEC
- WITH AUTOMATIC CHIP CONVEYOR SYSTEM
- WITH HAAS CNC CONTROL
- COMES WITH HAAS TR 160 2 AXIS TURN AND SWIVEL TABLE FOR FULL FOURTH AND FIFTH AXIS OPERATIONS (ALREADY DISMANTLED ACCORDING TO PICTURES)
- COMES WITH RENISHAW PROBE AS WELL AS TOOL MEASURING DEVICE
- ATTENTION: ONLY WAX HAS BEEN PROCESSED ON THIS MACHINE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-filler monoblock for 5 liter pet bottles khs innofill dvf 84/9sv pet

this volumetric pet bottler filler was manufactured by khs in 2006 and it has been used for filling beer in 5 liter pet bottles and it is suitable also for filling csd. this filler has capacity of 7000 x 5 liter pet bottles beer in an hour and it has been used very limited hours, around 10 000 hours only and it is in excellent condition. the filler comes with full bottle inspection system.

technical data
manufactured by khs in 2006
monobloc capacity 7 000 x 5 liter pet / hour
pet bottle used 5 liter with pco 34 mm closure
filler type khs innofill dvf 84/9sv pet with 84 filling valves
rinser khs innoclean fr-zmv 30/60 pet with 30 rinsing position
cap closing unit khs 9 stations 34 mm screw cap
cap loading unit magnettechnik corkmaster
filling inspector metec p4000, fms-r(uf)   FILLER MONOBLOCK FOR 5 LITER PET BOTTLES KHS INNOFILL DVF 84/9SV PET THIS VOLUMETRIC PET BOTTLER FILLER WAS MANUFACTURED BY KHS IN 2006 AND IT HAS BEEN USED FOR FILLING BEER IN 5 LITER PET BOTTLES AND IT IS SUITABLE ALSO FOR FILLING CSD. THIS FILLER HAS CAPACITY OF 7000 X 5 LITER PET BOTTLES BEER IN AN HOUR AND IT HAS BEEN USED VERY LIMITED HOURS, AROUND 10 000 HOURS ONLY AND IT IS IN EXCELLENT CONDITION. THE FILLER COMES WITH FULL BOTTLE INSPECTION SYSTEM. TECHNICAL DATA MANUFACTURED BY KHS IN 2006 MONOBLOC CAPACITY 7 000 X 5 LITER PET / HOUR PET BOTTLE USED 5 LITER WITH PCO 34 MM CLOSURE FILLER TYPE KHS INNOFILL DVF 84/9SV PET WITH 84 FILLING VALVES RINSER KHS INNOCLEAN FR-ZMV 30/60 PET WITH 30 RINSING POSITION CAP CLOSING UNIT KHS 9 STATIONS 34 MM SCREW CAP CAP LOADING UNIT MAGNETTECHNIK CORKMASTER FILLING INSPECTOR METEC P4000, FMS-R(UF)
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 5.900 €
Ubicación: Land-weight approx.: 1900 kg<br/>x-travel: 320 mm<br/>y-travel: 220 mm<br/>z-travel: 180 mm<br/>control: fanuc 16w <br/>dimensions (l x w x h) approx.: 3200 x 2200 x 2000 mm<br/>description: matra fanuc robocut wire edm machine - max. workpiece dimensions: 650 x 420 mm<br> - max. workpiece thickness: 160 mm<br> - max. workpiece weight: 350 kg<br> - feed rate: 900 mm/min<br> - wire speed: 0 - 10 m/min<br> - wire tension: 80 - 2500 gr<br> - wire guide (diameter): 0,25 mm<br> - comes with water processing plant WEIGHT APPROX.: 1900 KG
X-TRAVEL: 320 MM
Y-TRAVEL: 220 MM
Z-TRAVEL: 180 MM
CONTROL: FANUC 16W
DIMENSIONS (L X W X H) APPROX.: 3200 X 2200 X 2000 MM
DESCRIPTION: MATRA FANUC ROBOCUT WIRE EDM MACHINE - MAX. WORKPIECE DIMENSIONS: 650 X 420 MM
- MAX. WORKPIECE THICKNESS: 160 MM
- MAX. WORKPIECE WEIGHT: 350 KG
- FEED RATE: 900 MM/MIN
- WIRE SPEED: 0 - 10 M/MIN
- WIRE TENSION: 80 - 2500 GR
- WIRE GUIDE (DIAMETER): 0,25 MM
- COMES WITH WATER PROCESSING PLANT
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-yeast tanks 8 x 7.6 m3, scandi brew

yeast tank farm with 8 insulated stainless steel tanks with agitators and heating & cooling circuits for temperature control. each tank has electric motor driven agitator for mixing. tanks comes with valve banks, control cabinet and service platforms as shown in pictures.

manufacturer: scandi brew, denmark
made in year: 1998
number of tanks: 8
gross volume of each tank: 7627 liters
operating pressure: - 1 / 2.2 bar
operating temperature max. 120 °c
material: stainless steel 1.4301
cooling and heating media: glycol
tanks are equipped with electric motor driven agitator
one heating and one cooling circuit
insulation with stainless steel cladding
service platform
valve and controls   YEAST TANKS 8 X 7.6 M3, SCANDI BREW YEAST TANK FARM WITH 8 INSULATED STAINLESS STEEL TANKS WITH AGITATORS AND HEATING & COOLING CIRCUITS FOR TEMPERATURE CONTROL. EACH TANK HAS ELECTRIC MOTOR DRIVEN AGITATOR FOR MIXING. TANKS COMES WITH VALVE BANKS, CONTROL CABINET AND SERVICE PLATFORMS AS SHOWN IN PICTURES. MANUFACTURER: SCANDI BREW, DENMARK MADE IN YEAR: 1998 NUMBER OF TANKS: 8 GROSS VOLUME OF EACH TANK: 7627 LITERS OPERATING PRESSURE: - 1 / 2.2 BAR OPERATING TEMPERATURE MAX. 120 °C MATERIAL: STAINLESS STEEL 1.4301 COOLING AND HEATING MEDIA: GLYCOL TANKS ARE EQUIPPED WITH ELECTRIC MOTOR DRIVEN AGITATOR ONE HEATING AND ONE COOLING CIRCUIT INSULATION WITH STAINLESS STEEL CLADDING SERVICE PLATFORM VALVE AND CONTROLS
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 26.900 €
Ubicación: Land-weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 3200 x 2800 x 3000 mm<br/>description: haas vm-2 vertical machining centre<br> - serial no.: 1092502<br> - read off spindle hours: 1700<br> - travel (x/y/z): 762/508/508 mm<br> - thurst (x/y/z): approx. 18/24 kn<br> - rapids (x/y/z): up to 18 m/min<br> - spindle speed: up to 12.000 rpm<br> - table dimensions: 914 x 457 mm<br> - with t-slots in both x and y directions<br> - max. table load: 1361 kg<br> - taper: sk 40<br> - 24-fold tool changer<br> - max. tool diameter: 76 mm<br> - max. tool length: 279 mm<br> - tool to tool/chip to chip: 2,8 respectively 3,6 sec<br> - with automatic chip conveyor system<br> - with haas cnc control<br> - comes with haas tr 160 2 axis turn and swivel table for full fourth and fifth axis operations (already dismantled according to pictures)<br> - comes with renishaw probe as well as tool measuring device<br> - attention: only wax has been processed on this machine<br> - attention: pick up has to take place on 17 april 2019 WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 3200 X 2800 X 3000 MM
DESCRIPTION: HAAS VM-2 VERTICAL MACHINING CENTRE
- SERIAL NO.: 1092502
- READ OFF SPINDLE HOURS: 1700
- TRAVEL (X/Y/Z): 762/508/508 MM
- THURST (X/Y/Z): APPROX. 18/24 KN
- RAPIDS (X/Y/Z): UP TO 18 M/MIN
- SPINDLE SPEED: UP TO 12.000 RPM
- TABLE DIMENSIONS: 914 X 457 MM
- WITH T-SLOTS IN BOTH X AND Y DIRECTIONS
- MAX. TABLE LOAD: 1361 KG
- TAPER: SK 40
- 24-FOLD TOOL CHANGER
- MAX. TOOL DIAMETER: 76 MM
- MAX. TOOL LENGTH: 279 MM
- TOOL TO TOOL/CHIP TO CHIP: 2,8 RESPECTIVELY 3,6 SEC
- WITH AUTOMATIC CHIP CONVEYOR SYSTEM
- WITH HAAS CNC CONTROL
- COMES WITH HAAS TR 160 2 AXIS TURN AND SWIVEL TABLE FOR FULL FOURTH AND FIFTH AXIS OPERATIONS (ALREADY DISMANTLED ACCORDING TO PICTURES)
- COMES WITH RENISHAW PROBE AS WELL AS TOOL MEASURING DEVICE
- ATTENTION: ONLY WAX HAS BEEN PROCESSED ON THIS MACHINE
- ATTENTION: PICK UP HAS TO TAKE PLACE ON 17 APRIL 2019
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-waterjet - cutting machine, year 2017 as new
milling spindle, 2 heads, changing tables

3,800 bar - for cutting foams, plastics, textile, leather, cardboard, etc.

make: expert systems technology / thyssen uhde
type: cutexpert variojet
year of constr.: 2017

work area: 2,000 x 1.600 mm
max material thickness: 100 mm
rapid traverse max: 60 m / min
cutting nozzle diameter: 0.08 - 0.20 mm high pressure pump
make: uhde thyssenkrupp
type: hps 4022
pressure max: 3,800 bar
power: 22 kw

milling spindle
make: jã¤ger
maximum speed: 30,000 rpm

equipment / options:
-2 heads, 1 x with a milling spindle
-changing tables
-tables designed with va honeycomb elements
-including bagging filter
-including mobile compressor (metabo)
--program controlled height adjustment
-dxf import module
-nesting software module
-software module material database

footprint approximately: b = approx. 9 x 4 m, weight: 3500 kg

condition:
almost as good as new machine, comes from insolventem operation. 
delivered 10/2017, only about a year in operation.

price:
new price = (without installation) 232,000,-â?¬
requirement, net, from location north rhine-westphalia / germany
 WATERJET - CUTTING MACHINE, YEAR 2017 AS NEW MILLING SPINDLE, 2 HEADS, CHANGING TABLES 3,800 BAR - FOR CUTTING FOAMS, PLASTICS, TEXTILE, LEATHER, CARDBOARD, ETC. MAKE: EXPERT SYSTEMS TECHNOLOGY / THYSSEN UHDE TYPE: CUTEXPERT VARIOJET YEAR OF CONSTR.: 2017 WORK AREA: 2,000 X 1.600 MM MAX MATERIAL THICKNESS: 100 MM RAPID TRAVERSE MAX: 60 M / MIN CUTTING NOZZLE DIAMETER: 0.08 - 0.20 MM HIGH PRESSURE PUMP MAKE: UHDE THYSSENKRUPP TYPE: HPS 4022 PRESSURE MAX: 3,800 BAR POWER: 22 KW MILLING SPINDLE MAKE: J&ATILDE;&CURREN;GER MAXIMUM SPEED: 30,000 RPM EQUIPMENT / OPTIONS: -2 HEADS, 1 X WITH A MILLING SPINDLE -CHANGING TABLES -TABLES DESIGNED WITH VA HONEYCOMB ELEMENTS -INCLUDING BAGGING FILTER -INCLUDING MOBILE COMPRESSOR (METABO) --PROGRAM CONTROLLED HEIGHT ADJUSTMENT -DXF IMPORT MODULE -NESTING SOFTWARE MODULE -SOFTWARE MODULE MATERIAL DATABASE FOOTPRINT APPROXIMATELY: B = APPROX. 9 X 4 M, WEIGHT: 3500 KG CONDITION: ALMOST AS GOOD AS NEW MACHINE, COMES FROM INSOLVENTEM OPERATION. DELIVERED 10/2017, ONLY ABOUT A YEAR IN OPERATION. PRICE: NEW PRICE = (WITHOUT INSTALLATION) 232,000,-&ACIRC;?&NOT; REQUIREMENT, NET, FROM LOCATION NORTH RHINE-WESTPHALIA / GERMANY
Vendedor: 5m+ GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 39.900 €
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 4000 x 2900 x 3000 mm<br/>description: haas vm-3 vertical machining centre<br> - serial no.: 1125185<br> - read off spindle hours: 6147<br> - travel (x/y/z): 1016/660/635 mm<br> - thurst (x/y/z): approx. 18 kn<br> - rapids (x/y/z): up to 18 m/min<br> - spindle speed: up to 12.000 rpm<br> - table dimensions: 1372 x 635 mm<br> - with t-slots in both x and y directions<br> - max. table load: 1588 kg<br> - taper: sk 40<br> - 24-fold tool changer<br> - max. tool diameter: 76 mm<br> - max. tool length: 279 mm<br> - tool to tool/chip to chip: 2,8 respectively 3,6 sec<br> - with automatic chip conveyor system<br> - with haas cnc control<br> - comes with haas tr 160 2 axis turn and swivel table for full fourth and fifth axis operations (already dismantled according to pictures)<br> - comes with renishaw probe as well as tool measuring device<br> - attention: only wax has been processed on this machine<br> - attention: pick up has to take place on 17 april 2019 WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 2900 X 3000 MM
DESCRIPTION: HAAS VM-3 VERTICAL MACHINING CENTRE
- SERIAL NO.: 1125185
- READ OFF SPINDLE HOURS: 6147
- TRAVEL (X/Y/Z): 1016/660/635 MM
- THURST (X/Y/Z): APPROX. 18 KN
- RAPIDS (X/Y/Z): UP TO 18 M/MIN
- SPINDLE SPEED: UP TO 12.000 RPM
- TABLE DIMENSIONS: 1372 X 635 MM
- WITH T-SLOTS IN BOTH X AND Y DIRECTIONS
- MAX. TABLE LOAD: 1588 KG
- TAPER: SK 40
- 24-FOLD TOOL CHANGER
- MAX. TOOL DIAMETER: 76 MM
- MAX. TOOL LENGTH: 279 MM
- TOOL TO TOOL/CHIP TO CHIP: 2,8 RESPECTIVELY 3,6 SEC
- WITH AUTOMATIC CHIP CONVEYOR SYSTEM
- WITH HAAS CNC CONTROL
- COMES WITH HAAS TR 160 2 AXIS TURN AND SWIVEL TABLE FOR FULL FOURTH AND FIFTH AXIS OPERATIONS (ALREADY DISMANTLED ACCORDING TO PICTURES)
- COMES WITH RENISHAW PROBE AS WELL AS TOOL MEASURING DEVICE
- ATTENTION: ONLY WAX HAS BEEN PROCESSED ON THIS MACHINE
- ATTENTION: PICK UP HAS TO TAKE PLACE ON 17 APRIL 2019
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-waterjet - cutting machine, year 2017 as new
milling spindle, 2 heads, changing tables

3,800 bar - for cutting foams, plastics, textile, leather, cardboard, etc.

make: expert systems technology / thyssen uhde
type: cutexpert variojet
year of constr.: 2017

work area: 2,000 x 1.600 mm
max material thickness: 100 mm
rapid traverse max: 60 m / min
cutting nozzle diameter: 0.08 - 0.20 mm high pressure pump
make: uhde thyssenkrupp
type: hps 4022
pressure max: 3,800 bar
power: 22 kw

milling spindle
make: jã¤ger
maximum speed: 30,000 rpm

equipment / options:
-2 heads, 1 x with a milling spindle
-changing tables
-tables designed with va honeycomb elements
-including bagging filter
-including mobile compressor (metabo)
--program controlled height adjustment
-dxf import module
-nesting software module
-software module material database

footprint approximately: b = approx. 9 x 4 m, weight: 3500 kg

condition:
almost as good as new machine, comes from insolventem operation. 
delivered 10/2017, only about a year in operation.

price:
new price = (without installation) 232,000,-â?¬
requirement, net, from location north rhine-westphalia / germany
 WATERJET - CUTTING MACHINE, YEAR 2017 AS NEW MILLING SPINDLE, 2 HEADS, CHANGING TABLES 3,800 BAR - FOR CUTTING FOAMS, PLASTICS, TEXTILE, LEATHER, CARDBOARD, ETC. MAKE: EXPERT SYSTEMS TECHNOLOGY / THYSSEN UHDE TYPE: CUTEXPERT VARIOJET YEAR OF CONSTR.: 2017 WORK AREA: 2,000 X 1.600 MM MAX MATERIAL THICKNESS: 100 MM RAPID TRAVERSE MAX: 60 M / MIN CUTTING NOZZLE DIAMETER: 0.08 - 0.20 MM HIGH PRESSURE PUMP MAKE: UHDE THYSSENKRUPP TYPE: HPS 4022 PRESSURE MAX: 3,800 BAR POWER: 22 KW MILLING SPINDLE MAKE: J&ATILDE;&CURREN;GER MAXIMUM SPEED: 30,000 RPM EQUIPMENT / OPTIONS: -2 HEADS, 1 X WITH A MILLING SPINDLE -CHANGING TABLES -TABLES DESIGNED WITH VA HONEYCOMB ELEMENTS -INCLUDING BAGGING FILTER -INCLUDING MOBILE COMPRESSOR (METABO) --PROGRAM CONTROLLED HEIGHT ADJUSTMENT -DXF IMPORT MODULE -NESTING SOFTWARE MODULE -SOFTWARE MODULE MATERIAL DATABASE FOOTPRINT APPROXIMATELY: B = APPROX. 9 X 4 M, WEIGHT: 3500 KG CONDITION: ALMOST AS GOOD AS NEW MACHINE, COMES FROM INSOLVENTEM OPERATION. DELIVERED 10/2017, ONLY ABOUT A YEAR IN OPERATION. PRICE: NEW PRICE = (WITHOUT INSTALLATION) 232,000,-&ACIRC;?&NOT; REQUIREMENT, NET, FROM LOCATION NORTH RHINE-WESTPHALIA / GERMANY
Vendedor: 5m+ GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 100 kg<br/>dimensions (l x w x h) approx.: 900 x 600 x 1300 mm<br/>description: knife grinding machine.<br> blade length: 500 mm.<br> WEIGHT APPROX.: 100 KG
DIMENSIONS (L X W X H) APPROX.: 900 X 600 X 1300 MM
DESCRIPTION: KNIFE GRINDING MACHINE.
BLADE LENGTH: 500 MM.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-waterjet - cutting machine, year 2017 as new
milling spindle, 2 heads, changing tables

3,800 bar - for cutting foams, plastics, textile, leather, cardboard, etc.

make: expert systems technology / thyssen uhde
type: cutexpert variojet
year of constr.: 2017

work area: 2,000 x 1.600 mm
max material thickness: 100 mm
rapid traverse max: 60 m / min
cutting nozzle diameter: 0.08 - 0.20 mm high pressure pump
make: uhde thyssenkrupp
type: hps 4022
pressure max: 3,800 bar
power: 22 kw

milling spindle
make: jã¤ger
maximum speed: 30,000 rpm

equipment / options:
-2 heads, 1 x with a milling spindle
-changing tables
-tables designed with va honeycomb elements
-including bagging filter
-including mobile compressor (metabo)
--program controlled height adjustment
-dxf import module
-nesting software module
-software module material database

footprint approximately: b = approx. 9 x 4 m, weight: 3500 kg

condition:
almost as good as new machine, comes from insolventem operation. 
delivered 10/2017, only about a year in operation.

price:
new price = (without installation) 232,000,-â?¬
requirement, net, from location north rhine-westphalia / germany
 WATERJET - CUTTING MACHINE, YEAR 2017 AS NEW MILLING SPINDLE, 2 HEADS, CHANGING TABLES 3,800 BAR - FOR CUTTING FOAMS, PLASTICS, TEXTILE, LEATHER, CARDBOARD, ETC. MAKE: EXPERT SYSTEMS TECHNOLOGY / THYSSEN UHDE TYPE: CUTEXPERT VARIOJET YEAR OF CONSTR.: 2017 WORK AREA: 2,000 X 1.600 MM MAX MATERIAL THICKNESS: 100 MM RAPID TRAVERSE MAX: 60 M / MIN CUTTING NOZZLE DIAMETER: 0.08 - 0.20 MM HIGH PRESSURE PUMP MAKE: UHDE THYSSENKRUPP TYPE: HPS 4022 PRESSURE MAX: 3,800 BAR POWER: 22 KW MILLING SPINDLE MAKE: J&ATILDE;&CURREN;GER MAXIMUM SPEED: 30,000 RPM EQUIPMENT / OPTIONS: -2 HEADS, 1 X WITH A MILLING SPINDLE -CHANGING TABLES -TABLES DESIGNED WITH VA HONEYCOMB ELEMENTS -INCLUDING BAGGING FILTER -INCLUDING MOBILE COMPRESSOR (METABO) --PROGRAM CONTROLLED HEIGHT ADJUSTMENT -DXF IMPORT MODULE -NESTING SOFTWARE MODULE -SOFTWARE MODULE MATERIAL DATABASE FOOTPRINT APPROXIMATELY: B = APPROX. 9 X 4 M, WEIGHT: 3500 KG CONDITION: ALMOST AS GOOD AS NEW MACHINE, COMES FROM INSOLVENTEM OPERATION. DELIVERED 10/2017, ONLY ABOUT A YEAR IN OPERATION. PRICE: NEW PRICE = (WITHOUT INSTALLATION) 232,000,-&ACIRC;?&NOT; REQUIREMENT, NET, FROM LOCATION NORTH RHINE-WESTPHALIA / GERMANY
Vendedor: 5m+ GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 4500 kg<br/>x-travel: 500 mm<br/>y-travel: 350 mm<br/>z-travel: 300 mm<br/>dimensions (l x w x h) approx.: 1300 x 4200 x 2500 mm<br/>toolchanger positions: 30 <br/>taper: iso 30 <br/>turning speed range: 40 - 13000 rpm<br/>rapid traverse: 40 m/min<br/>pallet table size: 320 x 320 mm<br/>change time of pallets: 5 sec<br/>control: fanuc series 21i-mb <br/>power capacity - spindle: 5,5/3,0 kw<br/>workpiece weight: 450 kg<br/>description: enshu je30s horizontal machining centre<br> - production no.: 419<br> - distance spindle noose to middle of table: 120 - 420 mm<br> - distance spindle middle to table surface: 100 - 450 mm<br> - electrical connected power: 19 kva<br> - compressed air connection: min. 5 bar<br> - max. compressed air consumption: 300 l/min<br> - comes with renishaw measuring probe<br> - with cooling though spindle<br> - software option: helix milling and coordinate system - turning<br> - nc-rotary table (b-axis)<br> - read off power on time (h): approx. 5,700<br> - read off operating time (h): approx. 170<br> - see video WEIGHT APPROX.: 4500 KG
X-TRAVEL: 500 MM
Y-TRAVEL: 350 MM
Z-TRAVEL: 300 MM
DIMENSIONS (L X W X H) APPROX.: 1300 X 4200 X 2500 MM
TOOLCHANGER POSITIONS: 30
TAPER: ISO 30
TURNING SPEED RANGE: 40 - 13000 RPM
RAPID TRAVERSE: 40 M/MIN
PALLET TABLE SIZE: 320 X 320 MM
CHANGE TIME OF PALLETS: 5 SEC
CONTROL: FANUC SERIES 21I-MB
POWER CAPACITY - SPINDLE: 5,5/3,0 KW
WORKPIECE WEIGHT: 450 KG
DESCRIPTION: ENSHU JE30S HORIZONTAL MACHINING CENTRE
- PRODUCTION NO.: 419
- DISTANCE SPINDLE NOOSE TO MIDDLE OF TABLE: 120 - 420 MM
- DISTANCE SPINDLE MIDDLE TO TABLE SURFACE: 100 - 450 MM
- ELECTRICAL CONNECTED POWER: 19 KVA
- COMPRESSED AIR CONNECTION: MIN. 5 BAR
- MAX. COMPRESSED AIR CONSUMPTION: 300 L/MIN
- COMES WITH RENISHAW MEASURING PROBE
- WITH COOLING THOUGH SPINDLE
- SOFTWARE OPTION: HELIX MILLING AND COORDINATE SYSTEM - TURNING
- NC-ROTARY TABLE (B-AXIS)
- READ OFF POWER ON TIME (H): APPROX. 5,700
- READ OFF OPERATING TIME (H): APPROX. 170
- SEE VIDEO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-waterjet - cutting machine, year 2017 as new
milling spindle, 2 heads, changing tables

3,800 bar - for cutting foams, plastics, textile, leather, cardboard, etc.

make: expert systems technology / thyssen uhde
type: cutexpert variojet
year of constr.: 2017

work area: 2,000 x 1.600 mm
max material thickness: 100 mm
rapid traverse max: 60 m / min
cutting nozzle diameter: 0.08 - 0.20 mm high pressure pump
make: uhde thyssenkrupp
type: hps 4022
pressure max: 3,800 bar
power: 22 kw

milling spindle
make: jã¤ger
maximum speed: 30,000 rpm

equipment / options:
-2 heads, 1 x with a milling spindle
-changing tables
-tables designed with va honeycomb elements
-including bagging filter
-including mobile compressor (metabo)
--program controlled height adjustment
-dxf import module
-nesting software module
-software module material database

footprint approximately: b = approx. 9 x 4 m, weight: 3500 kg

condition:
almost as good as new machine, comes from insolventem operation. 
delivered 10/2017, only about a year in operation.

price:
new price = (without installation) 232,000,-â?¬
requirement, net, from location north rhine-westphalia / germany
 WATERJET - CUTTING MACHINE, YEAR 2017 AS NEW MILLING SPINDLE, 2 HEADS, CHANGING TABLES 3,800 BAR - FOR CUTTING FOAMS, PLASTICS, TEXTILE, LEATHER, CARDBOARD, ETC. MAKE: EXPERT SYSTEMS TECHNOLOGY / THYSSEN UHDE TYPE: CUTEXPERT VARIOJET YEAR OF CONSTR.: 2017 WORK AREA: 2,000 X 1.600 MM MAX MATERIAL THICKNESS: 100 MM RAPID TRAVERSE MAX: 60 M / MIN CUTTING NOZZLE DIAMETER: 0.08 - 0.20 MM HIGH PRESSURE PUMP MAKE: UHDE THYSSENKRUPP TYPE: HPS 4022 PRESSURE MAX: 3,800 BAR POWER: 22 KW MILLING SPINDLE MAKE: J&ATILDE;&CURREN;GER MAXIMUM SPEED: 30,000 RPM EQUIPMENT / OPTIONS: -2 HEADS, 1 X WITH A MILLING SPINDLE -CHANGING TABLES -TABLES DESIGNED WITH VA HONEYCOMB ELEMENTS -INCLUDING BAGGING FILTER -INCLUDING MOBILE COMPRESSOR (METABO) --PROGRAM CONTROLLED HEIGHT ADJUSTMENT -DXF IMPORT MODULE -NESTING SOFTWARE MODULE -SOFTWARE MODULE MATERIAL DATABASE FOOTPRINT APPROXIMATELY: B = APPROX. 9 X 4 M, WEIGHT: 3500 KG CONDITION: ALMOST AS GOOD AS NEW MACHINE, COMES FROM INSOLVENTEM OPERATION. DELIVERED 10/2017, ONLY ABOUT A YEAR IN OPERATION. PRICE: NEW PRICE = (WITHOUT INSTALLATION) 232,000,-&ACIRC;?&NOT; REQUIREMENT, NET, FROM LOCATION NORTH RHINE-WESTPHALIA / GERMANY
Vendedor: 5m+ GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 9.000 €
Ubicación: Land-weight approx.: 8000 kg<br/>turning diameter: 280/280 mm<br/>control: fanuc 2 x otc <br/>turning length: 300/300 mm<br/>dimensions (l x w x h) approx.: 4300 x 2053 x 2150 mm<br/>spindle bore: 80/80 mm<br/>description: - control: fanuc 2x otc<br> - x-axis: 230/230 mm<br> - z-axis: 350/350 mm<br> - spindle bore: 80/80 mm<br> - turning diameter: 280/280 mm<br> - turning length: 300/300 mm<br> <br> double spindle cnc lathe nakamura-tome tw-30 mm<br> - c axis<br> - number of revolvers: 2<br> - increased engine power left and right<br> - tool places: 12 + 12<br> - driven tools: 12<br> <br> - bar loader irco profimat ii<br> - passage: 42-64 mm, length 3 m<br> - chip conveyor: kakusan engineering<br> <br> the machine is in a neat condition and comes with extensive accessories(clamp,boring bar holders, collets, powered tools) WEIGHT APPROX.: 8000 KG
TURNING DIAMETER: 280/280 MM
CONTROL: FANUC 2 X OTC
TURNING LENGTH: 300/300 MM
DIMENSIONS (L X W X H) APPROX.: 4300 X 2053 X 2150 MM
SPINDLE BORE: 80/80 MM
DESCRIPTION: - CONTROL: FANUC 2X OTC
- X-AXIS: 230/230 MM
- Z-AXIS: 350/350 MM
- SPINDLE BORE: 80/80 MM
- TURNING DIAMETER: 280/280 MM
- TURNING LENGTH: 300/300 MM

DOUBLE SPINDLE CNC LATHE NAKAMURA-TOME TW-30 MM
- C AXIS
- NUMBER OF REVOLVERS: 2
- INCREASED ENGINE POWER LEFT AND RIGHT
- TOOL PLACES: 12 + 12
- DRIVEN TOOLS: 12

- BAR LOADER IRCO PROFIMAT II
- PASSAGE: 42-64 MM, LENGTH 3 M
- CHIP CONVEYOR: KAKUSAN ENGINEERING

THE MACHINE IS IN A NEAT CONDITION AND COMES WITH EXTENSIVE ACCESSORIES(CLAMP,BORING BAR HOLDERS, COLLETS, POWERED TOOLS)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-pet bottle filling line 6 000 bph
 
this is a complete pet bottle filling line used for beer filling in 2,0 and 2.5 liter pet bottles with capacity of 6000 bph (2.5 l). the line is still installed and powered. the line was installed in 2002 and reconfigured in 2011/2012 with new stand alone rinser, labeling machine and pallet stretch wrapper
 
main equipment included in this line:
 
item 1: pet blower sidel sbo 08 year 2002
- 8 cavities for 2.0 and 2.5 liter bottles
- capacity 9000 bph (2.0 l)
- preform feeding system and a chiller
item 2: air conveyor system
item 3: stand alone rinsing machine ave, capacity 6500 bph, year 2012
item 4: plate type flash pasteurizer alfa laval, year 2002
- type flexiterm f-60-12
- heat exchanger front 8 frh, comes with a buffer tank
- capacity (beer) 120 hl/h
item 5: filler capper cbi o&h50/10, upgraded in 2002 with
- 50 volumetric filling valves
- 10 arol capping heads
- capacity 6000 bph in 2.0 liter
item 6: full bottle inspector heuft basic, year 2002, capacity 12000 bph
item 7: aci bottle dryer
item 8: labeling machine krones solomodul, 2 station (neck and body) plastic hot glue labeler year
2011, capacity 7000 bph
item 9: label inspector krones checkmat - 707 bs, year 2007, capacity 12000 bph
item 10: shrink wrapper dimac stor p30, year 2002
item 11: robopack pallet wrapper   PET BOTTLE FILLING LINE 6 000 BPH THIS IS A COMPLETE PET BOTTLE FILLING LINE USED FOR BEER FILLING IN 2,0 AND 2.5 LITER PET BOTTLES WITH CAPACITY OF 6000 BPH (2.5 L). THE LINE IS STILL INSTALLED AND POWERED. THE LINE WAS INSTALLED IN 2002 AND RECONFIGURED IN 2011/2012 WITH NEW STAND ALONE RINSER, LABELING MACHINE AND PALLET STRETCH WRAPPER MAIN EQUIPMENT INCLUDED IN THIS LINE: ITEM 1: PET BLOWER SIDEL SBO 08 YEAR 2002 - 8 CAVITIES FOR 2.0 AND 2.5 LITER BOTTLES - CAPACITY 9000 BPH (2.0 L) - PREFORM FEEDING SYSTEM AND A CHILLER ITEM 2: AIR CONVEYOR SYSTEM ITEM 3: STAND ALONE RINSING MACHINE AVE, CAPACITY 6500 BPH, YEAR 2012 ITEM 4: PLATE TYPE FLASH PASTEURIZER ALFA LAVAL, YEAR 2002 - TYPE FLEXITERM F-60-12 - HEAT EXCHANGER FRONT 8 FRH, COMES WITH A BUFFER TANK - CAPACITY (BEER) 120 HL/H ITEM 5: FILLER CAPPER CBI O&H50/10, UPGRADED IN 2002 WITH - 50 VOLUMETRIC FILLING VALVES - 10 AROL CAPPING HEADS - CAPACITY 6000 BPH IN 2.0 LITER ITEM 6: FULL BOTTLE INSPECTOR HEUFT BASIC, YEAR 2002, CAPACITY 12000 BPH ITEM 7: ACI BOTTLE DRYER ITEM 8: LABELING MACHINE KRONES SOLOMODUL, 2 STATION (NECK AND BODY) PLASTIC HOT GLUE LABELER YEAR 2011, CAPACITY 7000 BPH ITEM 9: LABEL INSPECTOR KRONES CHECKMAT - 707 BS, YEAR 2007, CAPACITY 12000 BPH ITEM 10: SHRINK WRAPPER DIMAC STOR P30, YEAR 2002 ITEM 11: ROBOPACK PALLET WRAPPER
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 3.200 €
Ubicación: Land-weight approx.: 2500 kg<br/>control: fanuc 10 tf <br/>turning length: 600 mm<br/>dimensions (l x w x h) approx.: 2000 x 1290 x 1610 mm<br/>description: - control: fanuc 10 tf<br> - turning length: 600 mm<br> - bar capacity: 51 mm<br> - tool places: 10<br> - increased drive power: 11/15 kw<br> <br> single-spindle cnc lathe nakamura-tome tmc -20lr<br> - bar loader: stenzel turbostar ml-51<br> - chip conveyor: knoll<br> <br> the machine comes with extensive accessories: clamping jaws, feed stops, clamp holders. WEIGHT APPROX.: 2500 KG
CONTROL: FANUC 10 TF
TURNING LENGTH: 600 MM
DIMENSIONS (L X W X H) APPROX.: 2000 X 1290 X 1610 MM
DESCRIPTION: - CONTROL: FANUC 10 TF
- TURNING LENGTH: 600 MM
- BAR CAPACITY: 51 MM
- TOOL PLACES: 10
- INCREASED DRIVE POWER: 11/15 KW

SINGLE-SPINDLE CNC LATHE NAKAMURA-TOME TMC -20LR
- BAR LOADER: STENZEL TURBOSTAR ML-51
- CHIP CONVEYOR: KNOLL

THE MACHINE COMES WITH EXTENSIVE ACCESSORIES: CLAMPING JAWS, FEED STOPS, CLAMP HOLDERS.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 2.450 €
Ubicación: Land-for sale, a screw compressor with air dryer of the mark schneider is compressed air from reutlingen.

the unit comes from a relocation and walked up to least reliable.
 FOR SALE, A SCREW COMPRESSOR WITH AIR DRYER OF THE MARK SCHNEIDER IS COMPRESSED AIR FROM REUTLINGEN. THE UNIT COMES FROM A RELOCATION AND WALKED UP TO LEAST RELIABLE.
Vendedor: WS-Verfahrenstechnik
Año de construcción: usado
Ubicación: Land-weight approx.: 2158 kg<br/>dimensions (l x w x h) approx.: 3061 x 1397 x 1930 mm<br/>description:  - serial number: 511475083 - working hours: 1,756 hours - engine power: 32,1 kw - water cooling / 4 cylinders - mobile payload: 650 kg - tipping load: 1300 kg - hydraulic pump capacity: 54 l/min - bucket width: 1370 mm - bucket capacity: 0,272 sqm - comes with new front tires WEIGHT APPROX.: 2158 KG
DIMENSIONS (L X W X H) APPROX.: 3061 X 1397 X 1930 MM
DESCRIPTION: - SERIAL NUMBER: 511475083 - WORKING HOURS: 1,756 HOURS - ENGINE POWER: 32,1 KW - WATER COOLING / 4 CYLINDERS - MOBILE PAYLOAD: 650 KG - TIPPING LOAD: 1300 KG - HYDRAULIC PUMP CAPACITY: 54 L/MIN - BUCKET WIDTH: 1370 MM - BUCKET CAPACITY: 0,272 SQM - COMES WITH NEW FRONT TIRES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land- 
the sale is a perkins diesel aggregate type p230. the unit is in a good condition.

technical data:

engine: perkins
type: p230
power: 184 kw
fuel: fuel oil

builder: fg wilson
type: e3081h/001
power: 230 kva; 1500 rpm
voltage: 400 v
frequency: 50 hz
year of construction: 1999
operating hour: 261 h comes with: the aggregate is entirely in the sound guard. THE SALE IS A PERKINS DIESEL AGGREGATE TYPE P230. THE UNIT IS IN A GOOD CONDITION. TECHNICAL DATA: ENGINE: PERKINS TYPE: P230 POWER: 184 KW FUEL: FUEL OIL BUILDER: FG WILSON TYPE: E3081H/001 POWER: 230 KVA; 1500 RPM VOLTAGE: 400 V FREQUENCY: 50 HZ YEAR OF CONSTRUCTION: 1999 OPERATING HOUR: 261 H COMES WITH: THE AGGREGATE IS ENTIRELY IN THE SOUND GUARD.
Vendedor: BA-Generatoren
Año de construcción: usado
Precio: used machinery auction RESALE 3.900 €
Ubicación: Land-weight approx.: 3100 kg<br/>dimensions (l x w x h) approx.: 3780 x 1200 x 1780 mm<br/>description: <u><b>sandretto micro 50 injection moulding machine with atm automation loading unit</b></u>  <br> <br> - model: 50-247<br> - year of manufacture: 1999<br> - machine number: mmi50393<br> - comes with atm automation loading unit<br> <br> - clamping force: 50 t<br> - tonnage group: g050 t<br> - heating power: 5 kw<br> - pump power: 11 kw<br> - total power: 16 kw<br> - screw diameter: 32 mm<br> - cylinder head volume: 129 cm³<br> - screw type: reinforced<br> - max injection pressure: 190 bar<br> - max screw rotation: 262 rpm<br> - nozzle: m50 x 3 mm<br> - cores number: 2<br> - platen guide type: column<br> - distance between columns: 460 mm<br> - mould mounting high max: - , min: 120 mm<br> - opening stroke: 450 mm<br> <br> <b><u>the article must be picked up till --/--/----!</u></b> WEIGHT APPROX.: 3100 KG
DIMENSIONS (L X W X H) APPROX.: 3780 X 1200 X 1780 MM
DESCRIPTION: SANDRETTO MICRO 50 INJECTION MOULDING MACHINE WITH ATM AUTOMATION LOADING UNIT

- MODEL: 50-247
- YEAR OF MANUFACTURE: 1999
- MACHINE NUMBER: MMI50393
- COMES WITH ATM AUTOMATION LOADING UNIT

- CLAMPING FORCE: 50 T
- TONNAGE GROUP: G050 T
- HEATING POWER: 5 KW
- PUMP POWER: 11 KW
- TOTAL POWER: 16 KW
- SCREW DIAMETER: 32 MM
- CYLINDER HEAD VOLUME: 129 CM³
- SCREW TYPE: REINFORCED
- MAX INJECTION PRESSURE: 190 BAR
- MAX SCREW ROTATION: 262 RPM
- NOZZLE: M50 X 3 MM
- CORES NUMBER: 2
- PLATEN GUIDE TYPE: COLUMN
- DISTANCE BETWEEN COLUMNS: 460 MM
- MOULD MOUNTING HIGH MAX: - , MIN: 120 MM
- OPENING STROKE: 450 MM

THE ARTICLE MUST BE PICKED UP TILL --/--/----!
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 18.500 €
Ubicación: Land-for sale is a fats p1000 in very good condition.

the machine was always serviced and maintained, comes from a well-known pharmaceutical company.

it is with lots of accessories, which is to be on the spot.

FOR SALE IS A FATS P1000 IN VERY GOOD CONDITION. THE MACHINE WAS ALWAYS SERVICED AND MAINTAINED, COMES FROM A WELL-KNOWN PHARMACEUTICAL COMPANY. IT IS WITH LOTS OF ACCESSORIES, WHICH IS TO BE ON THE SPOT.
Vendedor: WS-Verfahrenstechnik
Año de construcción: usado
Precio: used machinery auction RESALE 2.900 €
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 6175 x 1505 x 2075 mm<br/>description: <u><b>sandretto 8150 injection moulding machine with atm automation loading unit with atm automation loading unit</b></u>  <br> <br> - model: 612-150<br> - year of manufacture: 1996<br> - comes with atm automation loading unit<br> <br> - clamping force: 150 t<br> - tonnage group: g130-150 t<br> - heating power: 12,8 kw<br> - pump power: 22 kw<br> - total power: 34,8 kw<br> - screw diameter: 50 mm<br> - cylinder head volume: 392 cm³<br> - screw type: reinforced<br> - max injection pressure: 135 bar<br> - max screw rotation: 536 rpm<br> - nozzle: m50 x 3 mm<br> - cores number: 2<br> - pneumatic valves number: 2<br> - platen guide type: column<br> - distance between columns: 460 mm<br> - mould mounting high max: 560 mm, min: 155 mm<br> - opening stroke: 500 mm<br> - max mould weight: 780 kg<br> <br> <b><u>the article must be picked up till --/--/----!</u></b> WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 6175 X 1505 X 2075 MM
DESCRIPTION: SANDRETTO 8150 INJECTION MOULDING MACHINE WITH ATM AUTOMATION LOADING UNIT WITH ATM AUTOMATION LOADING UNIT

- MODEL: 612-150
- YEAR OF MANUFACTURE: 1996
- COMES WITH ATM AUTOMATION LOADING UNIT

- CLAMPING FORCE: 150 T
- TONNAGE GROUP: G130-150 T
- HEATING POWER: 12,8 KW
- PUMP POWER: 22 KW
- TOTAL POWER: 34,8 KW
- SCREW DIAMETER: 50 MM
- CYLINDER HEAD VOLUME: 392 CM³
- SCREW TYPE: REINFORCED
- MAX INJECTION PRESSURE: 135 BAR
- MAX SCREW ROTATION: 536 RPM
- NOZZLE: M50 X 3 MM
- CORES NUMBER: 2
- PNEUMATIC VALVES NUMBER: 2
- PLATEN GUIDE TYPE: COLUMN
- DISTANCE BETWEEN COLUMNS: 460 MM
- MOULD MOUNTING HIGH MAX: 560 MM, MIN: 155 MM
- OPENING STROKE: 500 MM
- MAX MOULD WEIGHT: 780 KG

THE ARTICLE MUST BE PICKED UP TILL --/--/----!
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 11.750 €
Ubicación: Land-stephan mc10/2 microcut, emulsifyers, colloid mill, koialmã¼hle, inotec

voltage: 400v
protection: 20a
power: 5500/7500w
speed: 1450/2900/min
with circulation system and 90 litres hopper
equipped with 0, 9 mm cutting ring
machine comes from the kitchen of a hotel and was only very rarely in use when the new chef in the last 5 years
you is in very good condition, still should be cleaned thoroughly before use

video about test run and more pictures available STEPHAN MC10/2 MICROCUT, EMULSIFYERS, COLLOID MILL, KOIALM&ATILDE;&FRAC14;HLE, INOTEC VOLTAGE: 400V PROTECTION: 20A POWER: 5500/7500W SPEED: 1450/2900/MIN WITH CIRCULATION SYSTEM AND 90 LITRES HOPPER EQUIPPED WITH 0, 9 MM CUTTING RING MACHINE COMES FROM THE KITCHEN OF A HOTEL AND WAS ONLY VERY RARELY IN USE WHEN THE NEW CHEF IN THE LAST 5 YEARS YOU IS IN VERY GOOD CONDITION, STILL SHOULD BE CLEANED THOROUGHLY BEFORE USE VIDEO ABOUT TEST RUN AND MORE PICTURES AVAILABLE
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 3.900 €
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 6175 x 1505 x 2075 mm<br/>description: <u><b>sandretto 8150 injection moulding machine with atm automation loading unit with atm automation loading unit</b></u>  <br> <br> - model: 612-150<br> - machine number: m8460569<br> - year of manufacture: 1999<br> - comes with atm automation loading unit<br> <br> - clamping force: 150 t<br> - tonnage group: g130-150 t<br> - heating power: 12,8 kw<br> - pump power: 22 kw<br> - total power: 34,8 kw<br> - screw diameter: 50 mm<br> - cylinder head volume: 392 cm³<br> - screw type: standard<br> - max injection pressure: 135 bar<br> - max screw rotation: 536 rpm<br> - nozzle: m50 x 3 mm<br> - cores number: 2<br> - pneumatic valves number: 2<br> - platen guide type: column<br> - distance between columns: 460 mm<br> - mould mounting high max: 560 mm, min: 155 mm<br> - opening stroke: 500 mm<br> - max mould weight: 780 kg<br> WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 6175 X 1505 X 2075 MM
DESCRIPTION: SANDRETTO 8150 INJECTION MOULDING MACHINE WITH ATM AUTOMATION LOADING UNIT WITH ATM AUTOMATION LOADING UNIT

- MODEL: 612-150
- MACHINE NUMBER: M8460569
- YEAR OF MANUFACTURE: 1999
- COMES WITH ATM AUTOMATION LOADING UNIT

- CLAMPING FORCE: 150 T
- TONNAGE GROUP: G130-150 T
- HEATING POWER: 12,8 KW
- PUMP POWER: 22 KW
- TOTAL POWER: 34,8 KW
- SCREW DIAMETER: 50 MM
- CYLINDER HEAD VOLUME: 392 CM³
- SCREW TYPE: STANDARD
- MAX INJECTION PRESSURE: 135 BAR
- MAX SCREW ROTATION: 536 RPM
- NOZZLE: M50 X 3 MM
- CORES NUMBER: 2
- PNEUMATIC VALVES NUMBER: 2
- PLATEN GUIDE TYPE: COLUMN
- DISTANCE BETWEEN COLUMNS: 460 MM
- MOULD MOUNTING HIGH MAX: 560 MM, MIN: 155 MM
- OPENING STROKE: 500 MM
- MAX MOULD WEIGHT: 780 KG
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 750 €
Ubicación: Land-berghoff control computer.
runs properly.
bs installed.
â?¬6 shipping domestic
bank transfer or pick up
adamant.kim @ gmail.com
015254306961 BERGHOFF CONTROL COMPUTER. RUNS PROPERLY. BS INSTALLED. &ACIRC;?&NOT;6 SHIPPING DOMESTIC BANK TRANSFER OR PICK UP ADAMANT.KIM @ GMAIL.COM 015254306961
Vendedor: Herr thienlan
Año de construcción: usado
Ubicación: Land-:hbm-130 | hbm-130l | hbm-130xl <br/>spindle diameter:130|130|130 mm<br/>x-travel:1600|2000|2000 mm<br/>y-travel:1400|1800|1800 mm<br/>z-travel:2000 mm<br/>u-axis:250 mm<br/>w-axis (spindle longitudinal):900 mm<br/>max. torque on the spindle:3200 nm<br/>b-axis (table):360x1 °<br/>rapid speed:x/y/z/w: 2500 mm/min<br/>table load:8|10|10 t<br/>table-size:1600 x 1400|1800 x 1600|2200 x 2000 mm<br/>t-slots:9/11/12 stk.<br/>t-slot - width:28 mm<br/>transmission ratio:4 stk.<br/>spindle speed:4-800 1/min<br/>spindle taper:50 iso<br/>faceplate:drehmoment: 4900 nm<br/>faceplate:2.5-125 1/min<br/>faceplate:umdrehung stufenlos einstellbar <br/>faceplate:Ø:750 mm<br/>weight of the machine ca.:22,5|24,5|25,5 t<br/>main drive:22 kw<br/>machine size (lxwxh):6995/3647/342|7030/4665/3800|7030/4665/3800 mm<br/>2-axis dro : <br/>hydr. table clamping: <br/>european electric: <br/>plc control:siemens s7 <br/>: <br/>metric, 400v 50hz 3 phase: <br/>ce-design: <br/>: <br/>hydr. clamping of the axes: <br/>central lubrication for the guideways: <br/>faceplate: <br/>servo motors:von siemens/fanuc/fagor <br/>angular milling head: <br/>universal milling head: <br/>splash guards: <br/>spindle holder: <br/>: <br/>: <br/><br/>technical offer of hbm-130 ? powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower     maintenance and 80% failure rate reduced ? high rigidity spindle could insure the strong machining ? worktable 4x90° position by the collimator ? x,y, z, b axes dro are available ? spindle could choose iso50, with automatic clamping   1. introduce the horizontal boring and milling machine series hbm-130 of our company is suitable for such operation as drilling, counter-boring, boring, reaming, spot-facing, tapping and milling etc. also the horizontal boring and milling machine type is equipped with fixed facing head on which radial facing slide can be radically feed consequently to enable the machine to undertake boring of large-diameter hole, external cutting ,end face turning and recessing, etc. the machine is composed of bed, front column, headstock, cross and longitudinal saddle, worktable, back column and balance weight pulley etc. the vertical movement of headstock goes along the column\'s guideway, the worktable can move transversely and longitudinally on the bed, and the worktable can be rotated.  the characteristics of hbm-130   2.1 the big servo spindle 22kw motor supply continuously speed change and high torque output of       headstock.       four speed range can be changed by the selector on the control panel.       the infinit speed change in each range can be effected continuously and smoothly. it?s very simple and      convenient for machine operation.      compare with old headstock structure, 24 steps speed changing by hydraulic, the failure rate will be reduced 80%.    2.2 the vertical coordinate ( headstock lifting direction ) and cross coordinate ( worktable transverse movement ) and longitudinal coordinate ( worktable longitudinal movement--option ) are provided with new type digital read out unit with memory function, which makes the machine with complete function and high accuracy.   2.3 main parts of the machine such as bed, front column and guideways of longitudinal saddle are all hardened and ground, which bring high stiffness of the guideways and extend the using life of the machine.   2.4 the horizontal guideway surface of the machine is provided with all pull-board type dust-proof.   2.5 electric-hydraulic interlocking device will be fixed between the moving units and when a moving unit is working, the other moving units will be clamped automatically (except spindle, radial facing slide).   2.6 in the rapid traverse gearbox, safety clutches are installed to prevent the machine from overload.  3. transmission systems of the machine 3.1 headstock transmission       the rotation movement of boring spindle are driven by ctb servo spindle motor directly. insteady of old design, 24 steps spindle speed, the spindle servo motor supply two range speed. low spindle speed with big torque output and high spindle speed with stable and continuously cutting forece. 3.2 feed motion   the feed motion of all moving units of this machine is feeding per spindle revolution (e.g. traverse rate of spindle, headstock, table per spindle revolution).the power of various moving units comes from shaft driven by main driven motor. it can be transmitted through gears of speed-change device to shaft (the feed safety mechanism). after that the motion will be transmitted further through the forward and reverse mechanism, to the feed shaft, then to the lead-screw or gear racks of various moving units, enable the headstock, cross & longitudinal saddles to obtain each 18 steps feed rates at low and high gear respectively.   the feed motion of the radial slide on the facing head comes from headstock, enable it to obtain various feed rates. 3.3 rapid transmission system   the rapid moving of the headstock,cross & longitudinal saddles of the machine and the rapid rotation of the rotary worktable are driven by ac motor mounted at the right side of the bed. power from the motor is transmitted from shafts coupling and friction clutch to each moving units respectively, enable the spindle, headstock and cross & longitudinal saddles to obtain the rapid moving speed 2500mm/min, the rapid rotation of the worktable is 1r/min.  4. hydraulic system of the machine   the hydraulic system is located inside of longitudinal saddle of the machine, which is used for the transverse of headstock, longitudinal & cross movement, rotation of worktable, feed speed change and internal lubrication of headstock    :HBM-130 | HBM-130L | HBM-130XL
SPINDLE DIAMETER:130|130|130 MM
X-TRAVEL:1600|2000|2000 MM
Y-TRAVEL:1400|1800|1800 MM
Z-TRAVEL:2000 MM
U-AXIS:250 MM
W-AXIS (SPINDLE LONGITUDINAL):900 MM
MAX. TORQUE ON THE SPINDLE:3200 NM
B-AXIS (TABLE):360X1 °
RAPID SPEED:X/Y/Z/W: 2500 MM/MIN
TABLE LOAD:8|10|10 T
TABLE-SIZE:1600 X 1400|1800 X 1600|2200 X 2000 MM
T-SLOTS:9/11/12 STK.
T-SLOT - WIDTH:28 MM
TRANSMISSION RATIO:4 STK.
SPINDLE SPEED:4-800 1/MIN
SPINDLE TAPER:50 ISO
FACEPLATE:DREHMOMENT: 4900 NM
FACEPLATE:2.5-125 1/MIN
FACEPLATE:UMDREHUNG STUFENLOS EINSTELLBAR
FACEPLATE:Ø:750 MM
WEIGHT OF THE MACHINE CA.:22,5|24,5|25,5 T
MAIN DRIVE:22 KW
MACHINE SIZE (LXWXH):6995/3647/342|7030/4665/3800|7030/4665/3800 MM
2-AXIS DRO :
HYDR. TABLE CLAMPING:
EUROPEAN ELECTRIC:
PLC CONTROL:SIEMENS S7
:
METRIC, 400V 50HZ 3 PHASE:
CE-DESIGN:
:
HYDR. CLAMPING OF THE AXES:
CENTRAL LUBRICATION FOR THE GUIDEWAYS:
FACEPLATE:
SERVO MOTORS:VON SIEMENS/FANUC/FAGOR
ANGULAR MILLING HEAD:
UNIVERSAL MILLING HEAD:
SPLASH GUARDS:
SPINDLE HOLDER:
:
:

TECHNICAL OFFER OF HBM-130 ? POWERFUL SERVO SPINDLE MOTOR AND FOUR SPINDLE SPEED RANG, STEPLESS IN EACH RANGE. MUCH LOWER MAINTENANCE AND 80% FAILURE RATE REDUCED ? HIGH RIGIDITY SPINDLE COULD INSURE THE STRONG MACHINING ? WORKTABLE 4X90° POSITION BY THE COLLIMATOR ? X,Y, Z, B AXES DRO ARE AVAILABLE ? SPINDLE COULD CHOOSE ISO50, WITH AUTOMATIC CLAMPING 1. INTRODUCE THE HORIZONTAL BORING AND MILLING MACHINE SERIES HBM-130 OF OUR COMPANY IS SUITABLE FOR SUCH OPERATION AS DRILLING, COUNTER-BORING, BORING, REAMING, SPOT-FACING, TAPPING AND MILLING ETC. ALSO THE HORIZONTAL BORING AND MILLING MACHINE TYPE IS EQUIPPED WITH FIXED FACING HEAD ON WHICH RADIAL FACING SLIDE CAN BE RADICALLY FEED CONSEQUENTLY TO ENABLE THE MACHINE TO UNDERTAKE BORING OF LARGE-DIAMETER HOLE, EXTERNAL CUTTING ,END FACE TURNING AND RECESSING, ETC. THE MACHINE IS COMPOSED OF BED, FRONT COLUMN, HEADSTOCK, CROSS AND LONGITUDINAL SADDLE, WORKTABLE, BACK COLUMN AND BALANCE WEIGHT PULLEY ETC. THE VERTICAL MOVEMENT OF HEADSTOCK GOES ALONG THE COLUMN\'S GUIDEWAY, THE WORKTABLE CAN MOVE TRANSVERSELY AND LONGITUDINALLY ON THE BED, AND THE WORKTABLE CAN BE ROTATED. THE CHARACTERISTICS OF HBM-130 2.1 THE BIG SERVO SPINDLE 22KW MOTOR SUPPLY CONTINUOUSLY SPEED CHANGE AND HIGH TORQUE OUTPUT OF HEADSTOCK. FOUR SPEED RANGE CAN BE CHANGED BY THE SELECTOR ON THE CONTROL PANEL. THE INFINIT SPEED CHANGE IN EACH RANGE CAN BE EFFECTED CONTINUOUSLY AND SMOOTHLY. IT?S VERY SIMPLE AND CONVENIENT FOR MACHINE OPERATION. COMPARE WITH OLD HEADSTOCK STRUCTURE, 24 STEPS SPEED CHANGING BY HYDRAULIC, THE FAILURE RATE WILL BE REDUCED 80%. 2.2 THE VERTICAL COORDINATE ( HEADSTOCK LIFTING DIRECTION ) AND CROSS COORDINATE ( WORKTABLE TRANSVERSE MOVEMENT ) AND LONGITUDINAL COORDINATE ( WORKTABLE LONGITUDINAL MOVEMENT--OPTION ) ARE PROVIDED WITH NEW TYPE DIGITAL READ OUT UNIT WITH MEMORY FUNCTION, WHICH MAKES THE MACHINE WITH COMPLETE FUNCTION AND HIGH ACCURACY. 2.3 MAIN PARTS OF THE MACHINE SUCH AS BED, FRONT COLUMN AND GUIDEWAYS OF LONGITUDINAL SADDLE ARE ALL HARDENED AND GROUND, WHICH BRING HIGH STIFFNESS OF THE GUIDEWAYS AND EXTEND THE USING LIFE OF THE MACHINE. 2.4 THE HORIZONTAL GUIDEWAY SURFACE OF THE MACHINE IS PROVIDED WITH ALL PULL-BOARD TYPE DUST-PROOF. 2.5 ELECTRIC-HYDRAULIC INTERLOCKING DEVICE WILL BE FIXED BETWEEN THE MOVING UNITS AND WHEN A MOVING UNIT IS WORKING, THE OTHER MOVING UNITS WILL BE CLAMPED AUTOMATICALLY (EXCEPT SPINDLE, RADIAL FACING SLIDE). 2.6 IN THE RAPID TRAVERSE GEARBOX, SAFETY CLUTCHES ARE INSTALLED TO PREVENT THE MACHINE FROM OVERLOAD. 3. TRANSMISSION SYSTEMS OF THE MACHINE 3.1 HEADSTOCK TRANSMISSION THE ROTATION MOVEMENT OF BORING SPINDLE ARE DRIVEN BY CTB SERVO SPINDLE MOTOR DIRECTLY. INSTEADY OF OLD DESIGN, 24 STEPS SPINDLE SPEED, THE SPINDLE SERVO MOTOR SUPPLY TWO RANGE SPEED. LOW SPINDLE SPEED WITH BIG TORQUE OUTPUT AND HIGH SPINDLE SPEED WITH STABLE AND CONTINUOUSLY CUTTING FORECE. 3.2 FEED MOTION THE FEED MOTION OF ALL MOVING UNITS OF THIS MACHINE IS FEEDING PER SPINDLE REVOLUTION (E.G. TRAVERSE RATE OF SPINDLE, HEADSTOCK, TABLE PER SPINDLE REVOLUTION).THE POWER OF VARIOUS MOVING UNITS COMES FROM SHAFT DRIVEN BY MAIN DRIVEN MOTOR. IT CAN BE TRANSMITTED THROUGH GEARS OF SPEED-CHANGE DEVICE TO SHAFT (THE FEED SAFETY MECHANISM). AFTER THAT THE MOTION WILL BE TRANSMITTED FURTHER THROUGH THE FORWARD AND REVERSE MECHANISM, TO THE FEED SHAFT, THEN TO THE LEAD-SCREW OR GEAR RACKS OF VARIOUS MOVING UNITS, ENABLE THE HEADSTOCK, CROSS & LONGITUDINAL SADDLES TO OBTAIN EACH 18 STEPS FEED RATES AT LOW AND HIGH GEAR RESPECTIVELY. THE FEED MOTION OF THE RADIAL SLIDE ON THE FACING HEAD COMES FROM HEADSTOCK, ENABLE IT TO OBTAIN VARIOUS FEED RATES. 3.3 RAPID TRANSMISSION SYSTEM THE RAPID MOVING OF THE HEADSTOCK,CROSS & LONGITUDINAL SADDLES OF THE MACHINE AND THE RAPID ROTATION OF THE ROTARY WORKTABLE ARE DRIVEN BY AC MOTOR MOUNTED AT THE RIGHT SIDE OF THE BED. POWER FROM THE MOTOR IS TRANSMITTED FROM SHAFTS COUPLING AND FRICTION CLUTCH TO EACH MOVING UNITS RESPECTIVELY, ENABLE THE SPINDLE, HEADSTOCK AND CROSS & LONGITUDINAL SADDLES TO OBTAIN THE RAPID MOVING SPEED 2500MM/MIN, THE RAPID ROTATION OF THE WORKTABLE IS 1R/MIN. 4. HYDRAULIC SYSTEM OF THE MACHINE THE HYDRAULIC SYSTEM IS LOCATED INSIDE OF LONGITUDINAL SADDLE OF THE MACHINE, WHICH IS USED FOR THE TRANSVERSE OF HEADSTOCK, LONGITUDINAL & CROSS MOVEMENT, ROTATION OF WORKTABLE, FEED SPEED CHANGE AND INTERNAL LUBRICATION OF HEADSTOCK
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-berghoff p 3
850 mhz 128 mb
windows nt installed.
tested.
â?¬6 shipping domestic
bank transfer or pick up
adamant.kim @ gmail.com
015254306961 BERGHOFF P 3 850 MHZ 128 MB WINDOWS NT INSTALLED. TESTED. &ACIRC;?&NOT;6 SHIPPING DOMESTIC BANK TRANSFER OR PICK UP ADAMANT.KIM @ GMAIL.COM 015254306961
Vendedor: Herr thienlan
Año de construcción: usado
Ubicación: Land-:ll 550 | ll 750 | ll950 <br/>turning diameter:550 | 750 | 950 mm<br/>turning length:3000/4000/5000/6000/7000/8000/9000/12000/14000 mm<br/>control:siemens/fanuc/fagor <br/>center height over bed:475|575|675 mm<br/>bed width:990 mm<br/>spindle bore:153/230/305/405 mm<br/>spindle nose:a2-11/a2-15/a2-20/a2-28 <br/>spindle speed:9-600/9-500/7-400/5-250  u/min<br/>spindle taper:6 mk<br/>spindle drive:22/26 (30/37 opt.) kw<br/>tool turret:4/8/12 hydraulisch oder elektrisch <br/>tool holder -shaft diameter:32 (40 opt.) mm<br/>tailstock quill diameter:165|200 mm<br/>tailstock quill adjustment:250 mm<br/>taper in tailstock:6 mk<br/>tailstock movement:über motor <br/>travel -x axis:370 | 480  mm<br/>travel - z:= spitzenweite mm<br/>servo motor x-axis:3 | 4 kw<br/>servo motor z-axis:4 | 7  kw<br/>rapid power traverse in x-and z direction:5/4 m/min<br/>hydraulic motor:2,2 (2,9 opt.) kw<br/>coolant pump drive:3 (15 opt.) | 15 bar<br/>weight of the machine ca.:12,7/15,3/18/21,5/24/26,6 | 13,7/16,4/19/22,2/25/27,6/30,2/33 t<br/>machine length:5470/6470 /7470 /8470/9470/10470/11470/12470  mm<br/>machine width/height:3250 x 2370|3450 x 2370 mm<br/>max. workpiece weight -without tailstock:2000/2200/2400|2000/2200/2400|2200/2400/2600  kg<br/>max. workpiece weight between centres:6000/7000/8000 |6000/7000/8000 |7000/8000/9000 kg<br/>workpiece weight in steadies max.:mit einer lünette:7000/8000/9000|mit einer lünette:7000/8000/9000|mit einer lünette:8000/9000/10000 kg<br/>workpiece weight in steadies max.:mit zwei lünetten:8888/9000/10000| mit zwei lünetten: 9000/10000/11000  kg<br/>turret:8-pos (12 pos) <br/>bed all of one piece and solid cast:monoblock-ausführung mit 5 führungsbahnen <br/>motorized tailstock: <br/>chip conveyor: <br/>cnc controller:siemens/fanuc/fagor <br/>: <br/>mpg hand wheel: <br/>levellig elements: <br/>tools: <br/>: <br/>halogen lamp: <br/>: <br/>ce-certificate: <br/>c-axis: <br/>y-axis: <br/>b-axis: <br/>cnc controls from:siemens/fanuc/fagor <br/>steady rests:manuell oder hydraulisch <br/>atc: <br/>boring bar holder: <br/>linear scales: <br/><br/>   5 bed way heavy duty cnc lathe  ll series  the new model \ :LL 550 | LL 750 | LL950
TURNING DIAMETER:550 | 750 | 950 MM
TURNING LENGTH:3000/4000/5000/6000/7000/8000/9000/12000/14000 MM
CONTROL:SIEMENS/FANUC/FAGOR
CENTER HEIGHT OVER BED:475|575|675 MM
BED WIDTH:990 MM
SPINDLE BORE:153/230/305/405 MM
SPINDLE NOSE:A2-11/A2-15/A2-20/A2-28
SPINDLE SPEED:9-600/9-500/7-400/5-250 U/MIN
SPINDLE TAPER:6 MK
SPINDLE DRIVE:22/26 (30/37 OPT.) KW
TOOL TURRET:4/8/12 HYDRAULISCH ODER ELEKTRISCH
TOOL HOLDER -SHAFT DIAMETER:32 (40 OPT.) MM
TAILSTOCK QUILL DIAMETER:165|200 MM
TAILSTOCK QUILL ADJUSTMENT:250 MM
TAPER IN TAILSTOCK:6 MK
TAILSTOCK MOVEMENT:üBER MOTOR
TRAVEL -X AXIS:370 | 480 MM
TRAVEL - Z:= SPITZENWEITE MM
SERVO MOTOR X-AXIS:3 | 4 KW
SERVO MOTOR Z-AXIS:4 | 7 KW
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:5/4 M/MIN
HYDRAULIC MOTOR:2,2 (2,9 OPT.) KW
COOLANT PUMP DRIVE:3 (15 OPT.) | 15 BAR
WEIGHT OF THE MACHINE CA.:12,7/15,3/18/21,5/24/26,6 | 13,7/16,4/19/22,2/25/27,6/30,2/33 T
MACHINE LENGTH:5470/6470 /7470 /8470/9470/10470/11470/12470 MM
MACHINE WIDTH/HEIGHT:3250 X 2370|3450 X 2370 MM
MAX. WORKPIECE WEIGHT -WITHOUT TAILSTOCK:2000/2200/2400|2000/2200/2400|2200/2400/2600 KG
MAX. WORKPIECE WEIGHT BETWEEN CENTRES:6000/7000/8000 |6000/7000/8000 |7000/8000/9000 KG
WORKPIECE WEIGHT IN STEADIES MAX.:MIT EINER LüNETTE:7000/8000/9000|MIT EINER LüNETTE:7000/8000/9000|MIT EINER LüNETTE:8000/9000/10000 KG
WORKPIECE WEIGHT IN STEADIES MAX.:MIT ZWEI LüNETTEN:8888/9000/10000| MIT ZWEI LüNETTEN: 9000/10000/11000 KG
TURRET:8-POS (12 POS)
BED ALL OF ONE PIECE AND SOLID CAST:MONOBLOCK-AUSFüHRUNG MIT 5 FüHRUNGSBAHNEN
MOTORIZED TAILSTOCK:
CHIP CONVEYOR:
CNC CONTROLLER:SIEMENS/FANUC/FAGOR
:
MPG HAND WHEEL:
LEVELLIG ELEMENTS:
TOOLS:
:
HALOGEN LAMP:
:
CE-CERTIFICATE:
C-AXIS:
Y-AXIS:
B-AXIS:
CNC CONTROLS FROM:SIEMENS/FANUC/FAGOR
STEADY RESTS:MANUELL ODER HYDRAULISCH
ATC:
BORING BAR HOLDER:
LINEAR SCALES:

5 BED WAY HEAVY DUTY CNC LATHE LL SERIES THE NEW MODEL \"LL\" SERIES IS DESIGNED FOR COMBINING MORE ADVANTAGE AND EVOLUTIONARY LARGE CNC LATHES. ESPECIALLY IDEAL FOR TURNING LONG SHAFT AND HOLLOW TUBES, IT OVERCOMES THE INTERFERENCE BETWEEN CARRIAGE AND STEADY RESTS COMPLETELY. IN ORDER TO INTEGRATE THE RIGIDITY OF A FLAT BED LATHE WITH THE ADVANTAGES OF A SLANT BED LATHE, TUSCAN HAVE CREATED A BRAND NEW CONSTRUCTION : THE 5 BED WAY HEAVY DUTY CNC LATHE. THE LL SERIES INTEGRATES THE ADVANTAGES OF SUPER RIGIDITY, HIGH EFFICIENCY AND PERFECT ACCURACY, IN ONE MACHINE. MAXIMUM CUTTING DIAMETER: 950MM. BETWEEN CENTRES: 4000MM - 8000MM. BED WIDTH: 990MM. SPINDLE BORE: 153MM, 230MM, 305MM. DOUBLE CHUCK IS AVAILABLE. MILLING FUNCTION IS OPTIONAL. RIGID AS A FLAT BED LATHE AND EFFICIENT AS A SLANT BED. NO INTERFERENCE. COMPACT TO SAVE SPACE. ECONOMIC. LARGER WORKING CAPACITY.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-frequency inverter
lenze evs 9328 e7
and 13015957.
top condition.
â?¬6 shipping domestic
bank transfer or pick up
adamant.kim @ gmail.com
015254306961 FREQUENCY INVERTER LENZE EVS 9328 E7 AND 13015957. TOP CONDITION. &ACIRC;?&NOT;6 SHIPPING DOMESTIC BANK TRANSFER OR PICK UP ADAMANT.KIM @ GMAIL.COM 015254306961
Vendedor: Herr thienlan
Año de construcción: usado
Ubicación: Land-:ll-1250 | ll-1450 | ll-1650 <br/>turning diameter:1250 | 1450 | 1650 mm<br/>turning length:5000/6000/7000/8000/9000/12000/14000/16000 mm<br/>control:siemens/fanuc/fagor <br/>center height over bed:705|805|905 mm<br/>width of cross cariage:600 mm<br/>bed width:1370 mm<br/>spindle bore:200 mm<br/>spindle nose:a2-15/a2-15/a2-20/a2-28 <br/>spindle speed:4-400  u/min<br/>spindle taper:6 mk<br/>spindle drive:22/26 (30/37 opt.) kw<br/>tool turret:4/8/12 hydraulisch oder elektrisch <br/>tool holder -shaft diameter:40 mm<br/>tailstock quill diameter:300 mm<br/>tailstock quill adjustment:250 mm<br/>taper in tailstock:7 mk<br/>tailstock movement:über motor (zahnstangenantrieb) <br/>travel -x axis:755 mm<br/>travel - z:= spitzenweite mm<br/>servo motor x-axis:4 kw<br/>servo motor z-axis:7 kw<br/>rapid power traverse in x-and z direction:5 m/min<br/>hydraulic motor:1,4 (ab 9m: 3,6) kw<br/>coolant pump drive:15 bar<br/>weight of the machine ca.:auf anfrage <br/>machine length:15150/16150/17150/18150/19150/20150 mm<br/>machine width/height:auf anfrage <br/>max. workpiece weight -without tailstock:2000/2200/2400|2000/2200/2400|2200/2400/2600  kg<br/>max. workpiece weight between centres:6000/7000/8000 |6000/7000/8000 |7000/8000/9000 kg<br/>workpiece weight in steadies max.:mit einer lünette:7000/8000/9000|mit einer lünette:7000/8000/9000|mit einer lünette:8000/9000/10000 kg<br/>workpiece weight in steadies max.:mit zwei lünetten:8888/9000/10000| mit zwei lünetten: 9000/10000/11000  kg<br/>turret:4-pos (12 pos) <br/>bed all of one piece and solid cast:monoblock-ausführung mit 5 führungsbahnen <br/>motorized tailstock: <br/>chip conveyor: <br/>cnc controller:siemens/fanuc/fagor <br/>:2 türen vorne und hinten durchgehende wand <br/>mpg hand wheel: <br/>levellig elements: <br/>tools: <br/>: <br/>halogen lamp: <br/>: <br/>ce-certificate: <br/>c-axis: <br/>y-axis: <br/>b-axis: <br/>cnc controls from:siemens/fanuc/fagor <br/>steady rests:manuell oder hydraulisch <br/>atc: <br/>boring bar holder: <br/>linear scales: <br/><br/>   5 bed way heavy duty cnc lathe  ll series  the new model \ :LL-1250 | LL-1450 | LL-1650
TURNING DIAMETER:1250 | 1450 | 1650 MM
TURNING LENGTH:5000/6000/7000/8000/9000/12000/14000/16000 MM
CONTROL:SIEMENS/FANUC/FAGOR
CENTER HEIGHT OVER BED:705|805|905 MM
WIDTH OF CROSS CARIAGE:600 MM
BED WIDTH:1370 MM
SPINDLE BORE:200 MM
SPINDLE NOSE:A2-15/A2-15/A2-20/A2-28
SPINDLE SPEED:4-400 U/MIN
SPINDLE TAPER:6 MK
SPINDLE DRIVE:22/26 (30/37 OPT.) KW
TOOL TURRET:4/8/12 HYDRAULISCH ODER ELEKTRISCH
TOOL HOLDER -SHAFT DIAMETER:40 MM
TAILSTOCK QUILL DIAMETER:300 MM
TAILSTOCK QUILL ADJUSTMENT:250 MM
TAPER IN TAILSTOCK:7 MK
TAILSTOCK MOVEMENT:üBER MOTOR (ZAHNSTANGENANTRIEB)
TRAVEL -X AXIS:755 MM
TRAVEL - Z:= SPITZENWEITE MM
SERVO MOTOR X-AXIS:4 KW
SERVO MOTOR Z-AXIS:7 KW
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:5 M/MIN
HYDRAULIC MOTOR:1,4 (AB 9M: 3,6) KW
COOLANT PUMP DRIVE:15 BAR
WEIGHT OF THE MACHINE CA.:AUF ANFRAGE
MACHINE LENGTH:15150/16150/17150/18150/19150/20150 MM
MACHINE WIDTH/HEIGHT:AUF ANFRAGE
MAX. WORKPIECE WEIGHT -WITHOUT TAILSTOCK:2000/2200/2400|2000/2200/2400|2200/2400/2600 KG
MAX. WORKPIECE WEIGHT BETWEEN CENTRES:6000/7000/8000 |6000/7000/8000 |7000/8000/9000 KG
WORKPIECE WEIGHT IN STEADIES MAX.:MIT EINER LüNETTE:7000/8000/9000|MIT EINER LüNETTE:7000/8000/9000|MIT EINER LüNETTE:8000/9000/10000 KG
WORKPIECE WEIGHT IN STEADIES MAX.:MIT ZWEI LüNETTEN:8888/9000/10000| MIT ZWEI LüNETTEN: 9000/10000/11000 KG
TURRET:4-POS (12 POS)
BED ALL OF ONE PIECE AND SOLID CAST:MONOBLOCK-AUSFüHRUNG MIT 5 FüHRUNGSBAHNEN
MOTORIZED TAILSTOCK:
CHIP CONVEYOR:
CNC CONTROLLER:SIEMENS/FANUC/FAGOR
:2 TüREN VORNE UND HINTEN DURCHGEHENDE WAND
MPG HAND WHEEL:
LEVELLIG ELEMENTS:
TOOLS:
:
HALOGEN LAMP:
:
CE-CERTIFICATE:
C-AXIS:
Y-AXIS:
B-AXIS:
CNC CONTROLS FROM:SIEMENS/FANUC/FAGOR
STEADY RESTS:MANUELL ODER HYDRAULISCH
ATC:
BORING BAR HOLDER:
LINEAR SCALES:

5 BED WAY HEAVY DUTY CNC LATHE LL SERIES THE NEW MODEL \"LL\" SERIES IS DESIGNED FOR COMBINING MORE ADVANTAGE AND EVOLUTIONARY LARGE CNC LATHES. ESPECIALLY IDEAL FOR TURNING LONG SHAFT AND HOLLOW TUBES, IT OVERCOMES THE INTERFERENCE BETWEEN CARRIAGE AND STEADY RESTS COMPLETELY. IN ORDER TO INTEGRATE THE RIGIDITY OF A FLAT BED LATHE WITH THE ADVANTAGES OF A SLANT BED LATHE, TUSCAN HAVE CREATED A BRAND NEW CONSTRUCTION : THE 5 BED WAY HEAVY DUTY CNC LATHE. THE LL SERIES INTEGRATES THE ADVANTAGES OF SUPER RIGIDITY, HIGH EFFICIENCY AND PERFECT ACCURACY, IN ONE MACHINE. DOUBLE CHUCK IS AVAILABLE. MILLING AND BORING FUNCTION IS OPTIONAL, ALSO SIMOULTANOUSLY. RIGID AS A FLAT BED LATHE AND EFFICIENT AS A SLANT BED. NO INTERFERENCE. COMPACT TO SAVE SPACE. ECONOMIC. LARGER WORKING CAPACITY.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 2.200 €
Ubicación: Land-trumpf laser marking systems.
ymc3 rodenbach thera ronar lenses 254 mm
top condition.
â?¬10 shipping domestic TRUMPF LASER MARKING SYSTEMS. YMC3 RODENBACH THERA RONAR LENSES 254 MM TOP CONDITION. &ACIRC;?&NOT;10 SHIPPING DOMESTIC
Vendedor: Herr thienlan
Año de construcción: usado
Precio: used machinery auction RESALE 20.000 €
Ubicación: Land-steritech / tomesa rotating autoclave for 5 baskets, fabrication number: f94/49, year of construction: 1994, permissible working pressure: 5.0 bar, operating temperature: 158°c, volume: 5380 liter, heating: steam, diameter: 1200 mm, vicarb s.a. heat exchanger, number: ep1618/00, year of construction: 1994, l-max: 148 mm, l-min: 142 mm, total dimensions autoclave: 2000 mm x 5600 mm x 1950 mm, including switch cabinet, dimensions switch cabinet: 650 mm x 1200 mm x 2000 mm. STERITECH / TOMESA ROTATING AUTOCLAVE FOR 5 BASKETS, FABRICATION NUMBER: F94/49, YEAR OF CONSTRUCTION: 1994, PERMISSIBLE WORKING PRESSURE: 5.0 BAR, OPERATING TEMPERATURE: 158°C, VOLUME: 5380 LITER, HEATING: STEAM, DIAMETER: 1200 MM, VICARB S.A. HEAT EXCHANGER, NUMBER: EP1618/00, YEAR OF CONSTRUCTION: 1994, L-MAX: 148 MM, L-MIN: 142 MM, TOTAL DIMENSIONS AUTOCLAVE: 2000 MM X 5600 MM X 1950 MM, INCLUDING SWITCH CABINET, DIMENSIONS SWITCH CABINET: 650 MM X 1200 MM X 2000 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Precio: 5.550 €
Ubicación: Land-stephan vm60 vacuum mixer used
completely in stainless steel
with hygienic membrane keypad
timer seconds exactly adjustable
tumbling arm made of stainless steel
machine to drain and operate with gerin germ content tiltable
boiler capacity: 72 l
batch sizes: up to 60 litres
good condition, is to clean thoroughly prior to use
dimensions: 84x58x120cm

the machine comes from the bundeswehr and has received a new vacuum pump just before the sale.

video about test run and more pictures available

mengtumbler, tumblers, vacuum tumbler, mixers, mixing machine, blender STEPHAN VM60 VACUUM MIXER USED COMPLETELY IN STAINLESS STEEL WITH HYGIENIC MEMBRANE KEYPAD TIMER SECONDS EXACTLY ADJUSTABLE TUMBLING ARM MADE OF STAINLESS STEEL MACHINE TO DRAIN AND OPERATE WITH GERIN GERM CONTENT TILTABLE BOILER CAPACITY: 72 L BATCH SIZES: UP TO 60 LITRES GOOD CONDITION, IS TO CLEAN THOROUGHLY PRIOR TO USE DIMENSIONS: 84X58X120CM THE MACHINE COMES FROM THE BUNDESWEHR AND HAS RECEIVED A NEW VACUUM PUMP JUST BEFORE THE SALE. VIDEO ABOUT TEST RUN AND MORE PICTURES AVAILABLE MENGTUMBLER, TUMBLERS, VACUUM TUMBLER, MIXERS, MIXING MACHINE, BLENDER
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 20.000 €
Ubicación: Land-steritech / tomesa rotating autoclave for 5 baskets, fabrication number: f95/002, year of construction: 1995, permissible working pressure: 5.0 bar, operating temperature: 158°c, volume: 5380 liter, heating: steam, diameter: 1200 mm,, vicarb s.a. heat exchanger, number: 5110, year of construction: 1995, l-max: 148 mm, l-min: 142 mm, total dimensions autoclave: 2000 mm x 5600 mm x 1950 mm, including switch cabinet, dimensions switch cabinet: 650 mm x 1200 mm x 2000 mm. STERITECH / TOMESA ROTATING AUTOCLAVE FOR 5 BASKETS, FABRICATION NUMBER: F95/002, YEAR OF CONSTRUCTION: 1995, PERMISSIBLE WORKING PRESSURE: 5.0 BAR, OPERATING TEMPERATURE: 158°C, VOLUME: 5380 LITER, HEATING: STEAM, DIAMETER: 1200 MM,, VICARB S.A. HEAT EXCHANGER, NUMBER: 5110, YEAR OF CONSTRUCTION: 1995, L-MAX: 148 MM, L-MIN: 142 MM, TOTAL DIMENSIONS AUTOCLAVE: 2000 MM X 5600 MM X 1950 MM, INCLUDING SWITCH CABINET, DIMENSIONS SWITCH CABINET: 650 MM X 1200 MM X 2000 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Precio: 1.800 €
Ubicación: Land-the device is used to erode broken drills and taps up to about m 20 directly on the drill steel.
thereby, a copper - hollow electrode in the head is clamped.
the hollow electrode has a smaller diameter than the broken tool. in the edm, the core piece of the broken tool is broken down. the cutting loose and can be removed easily. because the electrode comes with the core of the hole not in touch, the thread remains intact. the usual operating drilling emulsion is used as a coolant
power 3.6 kva          
  THE DEVICE IS USED TO ERODE BROKEN DRILLS AND TAPS UP TO ABOUT M 20 DIRECTLY ON THE DRILL STEEL. THEREBY, A COPPER - HOLLOW ELECTRODE IN THE HEAD IS CLAMPED. THE HOLLOW ELECTRODE HAS A SMALLER DIAMETER THAN THE BROKEN TOOL. IN THE EDM, THE CORE PIECE OF THE BROKEN TOOL IS BROKEN DOWN. THE CUTTING LOOSE AND CAN BE REMOVED EASILY. BECAUSE THE ELECTRODE COMES WITH THE CORE OF THE HOLE NOT IN TOUCH, THE THREAD REMAINS INTACT. THE USUAL OPERATING DRILLING EMULSION IS USED AS A COOLANT POWER 3.6 KVA
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 20.000 €
Ubicación: Land-steritech / tomesa rotating autoclave for 5 baskets, fabrication number: 97ca51-1, year of construction: 1997, permissible working pressure: 5.0 bar, operating temperature: 158°c, volume: 5380 liter, heating: steam, diameter: 1200 mm, vicarb s.a. heat exchanger, number: 4940, year of construction: 1997, l-max: 148 mm, l-min: 142 mm, total dimensions autoclave: 2000 mm x 5600 mm x 1950 mm, including switch cabinet, dimensions switch cabinet: 650 mm x 1200 mm x 2000 mm. STERITECH / TOMESA ROTATING AUTOCLAVE FOR 5 BASKETS, FABRICATION NUMBER: 97CA51-1, YEAR OF CONSTRUCTION: 1997, PERMISSIBLE WORKING PRESSURE: 5.0 BAR, OPERATING TEMPERATURE: 158°C, VOLUME: 5380 LITER, HEATING: STEAM, DIAMETER: 1200 MM, VICARB S.A. HEAT EXCHANGER, NUMBER: 4940, YEAR OF CONSTRUCTION: 1997, L-MAX: 148 MM, L-MIN: 142 MM, TOTAL DIMENSIONS AUTOCLAVE: 2000 MM X 5600 MM X 1950 MM, INCLUDING SWITCH CABINET, DIMENSIONS SWITCH CABINET: 650 MM X 1200 MM X 2000 MM.
Vendedor: Industrial Auctions BV
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more OMES types: