1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-rundtrovamaschine 1250mm
fabr. rã?sler
type: r250-a/sa-pu-kfa bj. 1995
with acoustic protection device
trommeldruchmesser 1250mm
available with complete electrical plans. RUNDTROVAMASCHINE 1250MM FABR. RÃ?SLER TYPE: R250-A/SA-PU-KFA BJ. 1995 WITH ACOUSTIC PROTECTION DEVICE TROMMELDRUCHMESSER 1250MM AVAILABLE WITH COMPLETE ELECTRICAL PLANS.
Vendedor: IMDAT-WERKZEUGMASCHINENHANDEL
Año de construcción: usado
Precio: 27.500 €
Ubicación: Land-; gross weight [kg]: 3160; rear tyres remaining: 60; front tyres remaining: 60; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 3160; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 3.500 €
Ubicación: Land-manufacturer: faraz
type: ka 3.5
year of construction: 2001

max. total weight: 3500 kg
load compartment internal dimensions l x w x h: 4,550 x 2,000 x 2.390 mm

car trailer hitch ball
overrunning brake

wood shelf decor, home-built
vehicle equipment, sheet metal shelf
skylight and fluorescent lamp
230 volt power outlet
270â° rear portal doors

condition of tyres: approx. 60-80%

73450 neresheim price plus 19% vat from site
mistakes and intermediate sale is reserved MANUFACTURER: FARAZ TYPE: KA 3.5 YEAR OF CONSTRUCTION: 2001 MAX. TOTAL WEIGHT: 3500 KG LOAD COMPARTMENT INTERNAL DIMENSIONS L X W X H: 4,550 X 2,000 X 2.390 MM CAR TRAILER HITCH BALL OVERRUNNING BRAKE WOOD SHELF DECOR, HOME-BUILT VEHICLE EQUIPMENT, SHEET METAL SHELF SKYLIGHT AND FLUORESCENT LAMP 230 VOLT POWER OUTLET 270° REAR PORTAL DOORS CONDITION OF TYRES: APPROX. 60-80% 73450 NERESHEIM PRICE PLUS 19% VAT FROM SITE MISTAKES AND INTERMEDIATE SALE IS RESERVED
Vendedor: Umrath Handel & Verwertung
Año de construcción: usado
Precio: 27.500 €
Ubicación: Land-; gross weight [kg]: 3160; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 3160; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 30 €
Ubicación: Land-dã¼rkopp curves for conveyor
hanging textiles
used

length: 140 cm 90â° degree (curve)

large quantities available!

price:
price per piece
â?¬30,00 net
â?¬35,70 gross
you will receive an invoice with expelled vat

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible.    DüRKOPP CURVES FOR CONVEYOR HANGING TEXTILES USED LENGTH: 140 CM 90° DEGREE (CURVE) LARGE QUANTITIES AVAILABLE! PRICE: PRICE PER PIECE Â?¬30,00 NET Â?¬35,70 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Precio: 44.500 €
Ubicación: Land-; gross weight [kg]: 3260; rear tyres remaining: 60; front tyres remaining: 60; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 3260; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-pallet rack racks dexion p90
used in galvanized - technically correctly.

data:
-h: 300 cm - 550 cm
-t: 105-110 cm

-box load: 9000 kg at evenly distributed load.

-- -- !! large quantities available immediately from stock! -- --

price is negotiable for larger quantities!
you will receive an invoice with expelled vat

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.
delivery upon request by us conveniently possible.    PALLET RACK RACKS DEXION P90 USED IN GALVANIZED - TECHNICALLY CORRECTLY. DATA: -H: 300 CM - 550 CM -T: 105-110 CM -BOX LOAD: 9000 KG AT EVENLY DISTRIBUTED LOAD. -- -- !! LARGE QUANTITIES AVAILABLE IMMEDIATELY FROM STOCK! -- -- PRICE IS NEGOTIABLE FOR LARGER QUANTITIES! YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-; accessories: arbeitsbreite:305, trommelanzahl (4 stck.) ; ACCESSORIES: ARBEITSBREITE:305, TROMMELANZAHL (4 STCK.)
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-collar arm shelf one-sided virgin

data:
-h: approx. 5.0 m
-t: 1.3 meters
-l: approx. 16.1 meter
-arms: 1.0 meters

-new goods manufactured solid
-load: 500 kg per arm
-stand ral 5010 blue
-arms 100 cm
-arms in flame red
-other ral tones possible.

shelf consists of:
-17 x stand approx. 5.0 metres from ipe200.
-cantilever 119 x 1.0 meters from ipe80.
-results in 8 floors including ground.
-incl. crosses and tensioner
-incl. all screws
-incl. ground anchor for the fixing

you will receive an invoice with expelled vat

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible.   COLLAR ARM SHELF ONE-SIDED VIRGIN DATA: -H: APPROX. 5.0 M -T: 1.3 METERS -L: APPROX. 16.1 METER -ARMS: 1.0 METERS -NEW GOODS MANUFACTURED SOLID -LOAD: 500 KG PER ARM -STAND RAL 5010 BLUE -ARMS 100 CM -ARMS IN FLAME RED -OTHER RAL TONES POSSIBLE. SHELF CONSISTS OF: -17 X STAND APPROX. 5.0 METRES FROM IPE200. -CANTILEVER 119 X 1.0 METERS FROM IPE80. -RESULTS IN 8 FLOORS INCLUDING GROUND. -INCL. CROSSES AND TENSIONER -INCL. ALL SCREWS -INCL. GROUND ANCHOR FOR THE FIXING YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Precio: 6.900 €
Ubicación: Land-; gross weight [kg]: 10500; transmission: sonstige; front tyre size: 235/75r17.5; rear tyre size: 235/75r17.5; colour: schwarz; wheelbase: ; cargo space dimensions [lxbxh]: 7500x2470x500; max payload [kg]: 6240 ; GROSS WEIGHT [KG]: 10500; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: 235/75R17.5; REAR TYRE SIZE: 235/75R17.5; COLOUR: SCHWARZ; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: 7500X2470X500; MAX PAYLOAD [KG]: 6240
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: 240 €
Ubicación: Land-1 x pallet rack data:
-h: 462 cm
-t: approx. 110 cm
-l: 280 cm

-offer
-used in a technically perfect condition.
-stand blue
-traverses 270 cm
-trusses in orange

shelf consists of:
-2 x stand 462 x 110 cm
-traverse 4 x 270 cm
-incl. locking pins
-evaluates 9 pallet places.

price:
â?¬240 net
â?¬285,60 gross
you will receive an invoice with expelled vat

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible.      1 X PALLET RACK DATA: -H: 462 CM -T: APPROX. 110 CM -L: 280 CM -OFFER -USED IN A TECHNICALLY PERFECT CONDITION. -STAND BLUE -TRAVERSES 270 CM -TRUSSES IN ORANGE SHELF CONSISTS OF: -2 X STAND 462 X 110 CM -TRAVERSE 4 X 270 CM -INCL. LOCKING PINS -EVALUATES 9 PALLET PLACES. PRICE: Â?¬240 NET Â?¬285,60 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Precio: 159.000 €
Ubicación: Land-multifoiler press\r\nbrand: bürkle \r\ntype: btf 1528-1400 flowline\r\nyear: 2007\r\n\r\nwith paternoster\r\n\r\nhigh-performance system for the membrane-free thermoforming of smooth and shaped mdf parts with thermoplastic foils.\r\n\r\ntechnical data:\r\n\r\n1. surface material:\r\nfrom the roll, or as a blank cut \r\na) pvc foil 0.30 - 1.0 mm\r\nb) high gloss foil 0,50 - 1,0 mm\r\nc) pet foil 0.35 - 0.6 mm\r\nall foils suitable for the bürkle thermoform process.\r\n\r\n2. carrier material:\r\nmdf board, with smooth profiled surfaces.\r\nthickness tolerance +/- 0.15 mm\r\n\r\n3. adhesives:\r\ndispersion adhesive 80 - 150 g / m²\r\nfor foils, 1-component or 2-component polyurethane adhesive.\r\n\r\ntechnology\r\n\r\nthermoform coating, without membrane, 1400 mm foil\r\neffective area 1330 x 2630 mm\r\nmax. work piece size 1250 x 2550 mm\r\nmin. foil width 1400 mm\r\nsealing dimensions 1370 m (u.u 1360 mm)\r\nwork piece thickness 16 - 38 mm\r\n\r\nworkflow on the entire flowline:\r\n1. positioning of the work piece on the same tray.\r\n2. detecting the work peice positions using a digital camera.\r\n3. cover with foil from the foil paternoster.\r\n4. load the laying pallet into the multifoiler.\r\n5. placing the sheet in the multipin system within the press while entering the press.\r\n6. process of coating without membrane in the process chamber of the multifoilers.\r\npreheat the foil, vacuum and shape with shaping pressure to max. 6 bar.\r\n7. discharge the entire batch into the rotary turner / multiturning.\r\n8. turn the laying pallet with the work piece around the longitudinal axis.\r\n9. discharge of the work pieces on a conveyor belt and transport from the turner.\r\n10. direct, manual cutting with finished cut (trimming) on the conveyor belt.\r\nalternative:\r\n20 cycles per hour, with commercially available foils.\r\nglossy foils have a longer cycle time due to longer warm-up times.\r\n\r\nimplementation of plants\r\n\r\npos. 10 1 receiving and loading station\r\n\r\npos. 20 1 bürkle - multifolier model btf 1528\r\ntechnical data:\r\nhotplate size: 1500 x 2800 mm\r\nloading side: 1500 mm\r\nmax. heating temperature 140 ° c\r\noperating side: right\r\n\r\nlifting, lowering and locking the press table with hydraulic.\r\n\r\n1 upper sealing frame, 15 mm\r\nattached to upper heating plate with quick clamping system.\r\n\r\n1 vacuum device\r\nwith vacuum pump and reservoir.\r\n\r\npos. 21 1 chain conveyor\r\ndriven, reversible, frequency controlled, in the press.\r\n\r\npos. 22 1 chain conveyor\r\ndriven, frequency controlled, under the press\r\n\r\npos. 23 3 lay pallets\r\n\r\npos. 25 1 bürkle multi-pin system\r\nfully automatic sub-system for the membraneless coating of milled mdf parts.\r\n\r\nfunction:\r\n1. the workpieces are placed as before in the laying pallet with the usual distances, but without sub-parts.\r\n2. an lcd matrix camera captures the image and stores it digitally with a very fine resolution of approx. 2 x 2 mm.\r\n3. a special software calculates the respective pins matching the image and initiates the setting of the pins in the btf.\r\n4. the round pins are located in a maintenance-friendly, solid metal block inside the multifoilers.\r\n5. the new laying pattern is set immediately after leaving the laying pallet, or during the new loading of the btf time-saving.\r\n6. the occupied pallet inverts over the finished set sheet and the coating process can begin as known.\r\n\r\npos. 30 1 bürkle multi-turning\r\nautomatic turning station for foil-coated work piece batches with integrated lifting device.\r\nfunction:\r\nthe full laying pallet travels from the btf to the rotary turner after coating. a conveyor belt lowers and clamps the entire batch with the pallet. the entire installation revolves around 180 degrees.\r\n\r\npos. 31 1 piece belt transport\r\n\r\npos. 61 1 foil discharger / discharging\r\nfor unloading the foils during static charges.\r\nto avoid foil contamination\r\nsuitable for 1 foil unwinding station\r\n\r\npos. 10 a paternoster\r\nfor 23 rolls (Ø 400 mm)\r\nproduct width: 1600 mm\r\nconstruction height: 5400 mm\r\noverall width: 2370 mm\r\nincl. 1 piece roll transport\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding. MULTIFOILER PRESS\R\NBRAND: BüRKLE \R\NTYPE: BTF 1528-1400 FLOWLINE\R\NYEAR: 2007\R\N\R\NWITH PATERNOSTER\R\N\R\NHIGH-PERFORMANCE SYSTEM FOR THE MEMBRANE-FREE THERMOFORMING OF SMOOTH AND SHAPED MDF PARTS WITH THERMOPLASTIC FOILS.\R\N\R\NTECHNICAL DATA:\R\N\R\N1. SURFACE MATERIAL:\R\NFROM THE ROLL, OR AS A BLANK CUT \R\NA) PVC FOIL 0.30 - 1.0 MM\R\NB) HIGH GLOSS FOIL 0,50 - 1,0 MM\R\NC) PET FOIL 0.35 - 0.6 MM\R\NALL FOILS SUITABLE FOR THE BüRKLE THERMOFORM PROCESS.\R\N\R\N2. CARRIER MATERIAL:\R\NMDF BOARD, WITH SMOOTH PROFILED SURFACES.\R\NTHICKNESS TOLERANCE +/- 0.15 MM\R\N\R\N3. ADHESIVES:\R\NDISPERSION ADHESIVE 80 - 150 G / M²\R\NFOR FOILS, 1-COMPONENT OR 2-COMPONENT POLYURETHANE ADHESIVE.\R\N\R\NTECHNOLOGY\R\N\R\NTHERMOFORM COATING, WITHOUT MEMBRANE, 1400 MM FOIL\R\NEFFECTIVE AREA 1330 X 2630 MM\R\NMAX. WORK PIECE SIZE 1250 X 2550 MM\R\NMIN. FOIL WIDTH 1400 MM\R\NSEALING DIMENSIONS 1370 M (U.U 1360 MM)\R\NWORK PIECE THICKNESS 16 - 38 MM\R\N\R\NWORKFLOW ON THE ENTIRE FLOWLINE:\R\N1. POSITIONING OF THE WORK PIECE ON THE SAME TRAY.\R\N2. DETECTING THE WORK PEICE POSITIONS USING A DIGITAL CAMERA.\R\N3. COVER WITH FOIL FROM THE FOIL PATERNOSTER.\R\N4. LOAD THE LAYING PALLET INTO THE MULTIFOILER.\R\N5. PLACING THE SHEET IN THE MULTIPIN SYSTEM WITHIN THE PRESS WHILE ENTERING THE PRESS.\R\N6. PROCESS OF COATING WITHOUT MEMBRANE IN THE PROCESS CHAMBER OF THE MULTIFOILERS.\R\NPREHEAT THE FOIL, VACUUM AND SHAPE WITH SHAPING PRESSURE TO MAX. 6 BAR.\R\N7. DISCHARGE THE ENTIRE BATCH INTO THE ROTARY TURNER / MULTITURNING.\R\N8. TURN THE LAYING PALLET WITH THE WORK PIECE AROUND THE LONGITUDINAL AXIS.\R\N9. DISCHARGE OF THE WORK PIECES ON A CONVEYOR BELT AND TRANSPORT FROM THE TURNER.\R\N10. DIRECT, MANUAL CUTTING WITH FINISHED CUT (TRIMMING) ON THE CONVEYOR BELT.\R\NALTERNATIVE:\R\N20 CYCLES PER HOUR, WITH COMMERCIALLY AVAILABLE FOILS.\R\NGLOSSY FOILS HAVE A LONGER CYCLE TIME DUE TO LONGER WARM-UP TIMES.\R\N\R\NIMPLEMENTATION OF PLANTS\R\N\R\NPOS. 10 1 RECEIVING AND LOADING STATION\R\N\R\NPOS. 20 1 BüRKLE - MULTIFOLIER MODEL BTF 1528\R\NTECHNICAL DATA:\R\NHOTPLATE SIZE: 1500 X 2800 MM\R\NLOADING SIDE: 1500 MM\R\NMAX. HEATING TEMPERATURE 140 ° C\R\NOPERATING SIDE: RIGHT\R\N\R\NLIFTING, LOWERING AND LOCKING THE PRESS TABLE WITH HYDRAULIC.\R\N\R\N1 UPPER SEALING FRAME, 15 MM\R\NATTACHED TO UPPER HEATING PLATE WITH QUICK CLAMPING SYSTEM.\R\N\R\N1 VACUUM DEVICE\R\NWITH VACUUM PUMP AND RESERVOIR.\R\N\R\NPOS. 21 1 CHAIN CONVEYOR\R\NDRIVEN, REVERSIBLE, FREQUENCY CONTROLLED, IN THE PRESS.\R\N\R\NPOS. 22 1 CHAIN CONVEYOR\R\NDRIVEN, FREQUENCY CONTROLLED, UNDER THE PRESS\R\N\R\NPOS. 23 3 LAY PALLETS\R\N\R\NPOS. 25 1 BüRKLE MULTI-PIN SYSTEM\R\NFULLY AUTOMATIC SUB-SYSTEM FOR THE MEMBRANELESS COATING OF MILLED MDF PARTS.\R\N\R\NFUNCTION:\R\N1. THE WORKPIECES ARE PLACED AS BEFORE IN THE LAYING PALLET WITH THE USUAL DISTANCES, BUT WITHOUT SUB-PARTS.\R\N2. AN LCD MATRIX CAMERA CAPTURES THE IMAGE AND STORES IT DIGITALLY WITH A VERY FINE RESOLUTION OF APPROX. 2 X 2 MM.\R\N3. A SPECIAL SOFTWARE CALCULATES THE RESPECTIVE PINS MATCHING THE IMAGE AND INITIATES THE SETTING OF THE PINS IN THE BTF.\R\N4. THE ROUND PINS ARE LOCATED IN A MAINTENANCE-FRIENDLY, SOLID METAL BLOCK INSIDE THE MULTIFOILERS.\R\N5. THE NEW LAYING PATTERN IS SET IMMEDIATELY AFTER LEAVING THE LAYING PALLET, OR DURING THE NEW LOADING OF THE BTF TIME-SAVING.\R\N6. THE OCCUPIED PALLET INVERTS OVER THE FINISHED SET SHEET AND THE COATING PROCESS CAN BEGIN AS KNOWN.\R\N\R\NPOS. 30 1 BüRKLE MULTI-TURNING\R\NAUTOMATIC TURNING STATION FOR FOIL-COATED WORK PIECE BATCHES WITH INTEGRATED LIFTING DEVICE.\R\NFUNCTION:\R\NTHE FULL LAYING PALLET TRAVELS FROM THE BTF TO THE ROTARY TURNER AFTER COATING. A CONVEYOR BELT LOWERS AND CLAMPS THE ENTIRE BATCH WITH THE PALLET. THE ENTIRE INSTALLATION REVOLVES AROUND 180 DEGREES.\R\N\R\NPOS. 31 1 PIECE BELT TRANSPORT\R\N\R\NPOS. 61 1 FOIL DISCHARGER / DISCHARGING\R\NFOR UNLOADING THE FOILS DURING STATIC CHARGES.\R\NTO AVOID FOIL CONTAMINATION\R\NSUITABLE FOR 1 FOIL UNWINDING STATION\R\N\R\NPOS. 10 A PATERNOSTER\R\NFOR 23 ROLLS (Ø 400 MM)\R\NPRODUCT WIDTH: 1600 MM\R\NCONSTRUCTION HEIGHT: 5400 MM\R\NOVERALL WIDTH: 2370 MM\R\NINCL. 1 PIECE ROLL TRANSPORT\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-we offer new and used at reasonable prices bottom shelves and 2-storey compartment floor shelf systems.

bottom shelves are perfect for that, to effectively store small parts.
a good storage in a professional floor rack system guarantees short pick times and saves so much time and money.
their employees have shorter routes and waste no time to find the right article.
a dream for every mail.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.    WE OFFER NEW AND USED AT REASONABLE PRICES BOTTOM SHELVES AND 2-STOREY COMPARTMENT FLOOR SHELF SYSTEMS. BOTTOM SHELVES ARE PERFECT FOR THAT, TO EFFECTIVELY STORE SMALL PARTS. A GOOD STORAGE IN A PROFESSIONAL FLOOR RACK SYSTEM GUARANTEES SHORT PICK TIMES AND SAVES SO MUCH TIME AND MONEY. THEIR EMPLOYEES HAVE SHORTER ROUTES AND WASTE NO TIME TO FIND THE RIGHT ARTICLE. A DREAM FOR EVERY MAIL. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-manufacturer: omma, type: scm e 1450, year: 1996, control: omma, work piece width min-max mm: 1300, min.-max. workpiece height in mm: 80, working widht max mm: 1350, operating side: links, working height: 900+-/15, feeding speed min/max: 10 - 50, free text: 3 dekorwalzen (ahorn, buche, aningre), year :1996 MANUFACTURER: OMMA, TYPE: SCM E 1450, YEAR: 1996, CONTROL: OMMA, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE HEIGHT IN MM: 80, WORKING WIDHT MAX MM: 1350, OPERATING SIDE: LINKS, WORKING HEIGHT: 900+-/15, FEEDING SPEED MIN/MAX: 10 - 50, FREE TEXT: 3 DEKORWALZEN (AHORN, BUCHE, ANINGRE), YEAR :1996
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: 6.025 €
Ubicación: Land-100 of m racking jungheinrich
mp / t

data:
-h: 720 cm
-t: approx. 110 cm
-l: approximately 100.8 m

-1000 kg per pallet space
-stand blue
-traverses 270 cm
-trusses in yellow

shelf consists of:
-37 x stand approx. 720 cm
-traverse 144 x 270 cm
-results in 324 pallet places.

shelf stand at different heights in stock!

price:
â?¬6025 net
â?¬7169,75 gross
you will receive an invoice with expelled vat

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible.      100 OF M RACKING JUNGHEINRICH MP / T DATA: -H: 720 CM -T: APPROX. 110 CM -L: APPROXIMATELY 100.8 M -1000 KG PER PALLET SPACE -STAND BLUE -TRAVERSES 270 CM -TRUSSES IN YELLOW SHELF CONSISTS OF: -37 X STAND APPROX. 720 CM -TRAVERSE 144 X 270 CM -RESULTS IN 324 PALLET PLACES. SHELF STAND AT DIFFERENT HEIGHTS IN STOCK! PRICE: Â?¬6025 NET Â?¬7169,75 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-manufacturer hsm<br/>type vk 4012<br/>year of construction 2003<br/>hours of operation 18,158 hours, stand march<br/>quantity of pressed bales 71,479 bales, stand march<br/>press power main press 45 tons<br/>specific press capacity 69,4 n/cm²<br/>feed channel 820 x 1,250 mm (w x l)<br/>capacity per cycle time 0,81 m³<br/>theoretic cycle time 17 sec.<br/>theoretic  throughput rate 174 m³/h<br/>bale size 900 x 720 x 600 up to 1,200 mm (w x h x l)<br/>driving motor 15 kw<br/>connected load 18 kw, 500 v, 50 hz, 30 a<br/>tying system 3-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 3,5 tons/h<br/>bulk weight of 50 kg/cbm up to 8,7 tons/h<br/>bale weight up to 400 kg/bale, depends on material<br/>volume hydraulic oil tank 300 l<br/>sps controller (manuf., type) siemens simatic s7 300<br/>operating panel (manuf., type)  siemens simatic hmi<br/>transport dimensions only baler 6,180 x 2,250 x 2,350 mm (l x w x h)<br/>machine weight baler approx. 7 tons<br/>condition of the baler:<br/>the machine is in good condition, has been regularly serviced and is ready for immediate use.<br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER HSM
TYPE VK 4012
YEAR OF CONSTRUCTION 2003
HOURS OF OPERATION 18,158 HOURS, STAND MARCH
QUANTITY OF PRESSED BALES 71,479 BALES, STAND MARCH
PRESS POWER MAIN PRESS 45 TONS
SPECIFIC PRESS CAPACITY 69,4 N/CM²
FEED CHANNEL 820 X 1,250 MM (W X L)
CAPACITY PER CYCLE TIME 0,81 M³
THEORETIC CYCLE TIME 17 SEC.
THEORETIC THROUGHPUT RATE 174 M³/H
BALE SIZE 900 X 720 X 600 UP TO 1,200 MM (W X H X L)
DRIVING MOTOR 15 KW
CONNECTED LOAD 18 KW, 500 V, 50 HZ, 30 A
TYING SYSTEM 3-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 3,5 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 8,7 TONS/H
BALE WEIGHT UP TO 400 KG/BALE, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 300 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS SIMATIC S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC HMI
TRANSPORT DIMENSIONS ONLY BALER 6,180 X 2,250 X 2,350 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 7 TONS
CONDITION OF THE BALER:
THE MACHINE IS IN GOOD CONDITION, HAS BEEN REGULARLY SERVICED AND IS READY FOR IMMEDIATE USE.
COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 520 €
Ubicación: Land-1 x pallet rack

data:
-h: approx. 336 cm
-t: approx. 110 cm
-l: 840 cm

-offer
-used in a technically perfect condition.
-stand blue
-traverses 270 cm
-trusses in orange

shelf consists of:
-4 x stand 336 x 110 cm
-traverse 12 x 270 cm
-incl. locking pins
-results in 27 pallet places.

price:
â?¬520,00 net
â?¬618,80 gross
you will receive an invoice with expelled vat

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible.      1 X PALLET RACK DATA: -H: APPROX. 336 CM -T: APPROX. 110 CM -L: 840 CM -OFFER -USED IN A TECHNICALLY PERFECT CONDITION. -STAND BLUE -TRAVERSES 270 CM -TRUSSES IN ORANGE SHELF CONSISTS OF: -4 X STAND 336 X 110 CM -TRAVERSE 12 X 270 CM -INCL. LOCKING PINS -RESULTS IN 27 PALLET PLACES. PRICE: &ACIRC;?&NOT;520,00 NET &ACIRC;?&NOT;618,80 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>typ hbc 110<br/>year of construction 2005<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 3,15 cbm<br/>theoretic cycle time 19 sec.<br/>bale size 1,100 x 1,100 mm (w x h) length adjustable<br/>driving motor 75 kw<br/>tying system  5-fold horizontal, fully automated<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 16 tons/h<br/>bulk weight of 50 kg/cbm approx. 25 tons/h<br/>bulk weight of 100 kg/cbm approx. 47 tons/h<br/>bale weight 850 up to 1.400 kg<br/>hydralicoil 1,200 l<br/>baler dimensions built up with hopper approx.11,750 x 2,250 x 6,690   mm (l x w x h)<br/>transport dimensions only baler approx.11,750 x 2,250 x 3,150   mm (l x w x h)<br/>machine weight baler 36 tons<br/>comments this machine has a 5-fold horizontal binding system for difficult to press materials such as pet bottles and residual waste. in addition, the baler is equipped with a perforator for pet bottles.<br/>inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYP HBC 110
YEAR OF CONSTRUCTION 2005
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 3,15 CBM
THEORETIC CYCLE TIME 19 SEC.
BALE SIZE 1,100 X 1,100 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 75 KW
TYING SYSTEM 5-FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 16 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 25 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 47 TONS/H
BALE WEIGHT 850 UP TO 1.400 KG
HYDRALICOIL 1,200 L
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX.11,750 X 2,250 X 6,690 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX.11,750 X 2,250 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER 36 TONS
COMMENTS THIS MACHINE HAS A 5-FOLD HORIZONTAL BINDING SYSTEM FOR DIFFICULT TO PRESS MATERIALS SUCH AS PET BOTTLES AND RESIDUAL WASTE. IN ADDITION, THE BALER IS EQUIPPED WITH A PERFORATOR FOR PET BOTTLES.
INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 7.900 €
Ubicación: Land-fws 15 with a cnc railway control heidenhain tnc 151

-adjustable control panel
-electronic hand wheel
table size 1500x400mm
-t-slots 5 piece
traverse paths x axis 1200 mm y 450 mm z axis axis 450 mm
table load of 630 kg
tool holder sk 50
-spindle speed range continuously variable 31-3550 rpm-vertical + horizontal
feed range 1-2000 mm / min
rapid traverse 4000 mm / min
-vertical milling head tilting to the left and right
-horizontal milling head with overarm
-hydraulic tool clamping vertical + horizontal
-hydraulic lubrication for the milling head
central lubrication system
interface rs 232
ball screws on all three axes
width stable guideways
cooling plant with chip tray
power 15kw
total power 25kw
feed force 10,000 newton
weight 4000kg
-complete machine documentation
space without full casing l x w x h approx. 3700 x 2200 x 2200
-the machine can be visited by appointment, of course, a trial run is possible.

in addition tool holders and various are the machine, as shown on the picture to see the two cars, including the approximately 40 pcs. tools, as well as a hydraulic machine vise.

the milling machine is built in 1986 and is located in a clean condition.

commission: sales in the sales order.

net price: â?¬7.900,00 + 19% vat
gross price: â?¬9.401,00 incl. 19% vat

87742 apfeltrach, visit is at any time possible and desirable, for questions andreas wiã?miller available under 0160/8037872 available.

the goods are sold as seen and tested exclusively for commercial purposes, without any guarantee and warranty!

we can arrange the preparation of export documents and the transport for you worldwide. 

all information without guarantee, errors and spelling mistakes, and subject to prior sale!
 FWS 15 WITH A CNC RAILWAY CONTROL HEIDENHAIN TNC 151 -ADJUSTABLE CONTROL PANEL -ELECTRONIC HAND WHEEL TABLE SIZE 1500X400MM -T-SLOTS 5 PIECE TRAVERSE PATHS X AXIS 1200 MM Y 450 MM Z AXIS AXIS 450 MM TABLE LOAD OF 630 KG TOOL HOLDER SK 50 -SPINDLE SPEED RANGE CONTINUOUSLY VARIABLE 31-3550 RPM-VERTICAL + HORIZONTAL FEED RANGE 1-2000 MM / MIN RAPID TRAVERSE 4000 MM / MIN -VERTICAL MILLING HEAD TILTING TO THE LEFT AND RIGHT -HORIZONTAL MILLING HEAD WITH OVERARM -HYDRAULIC TOOL CLAMPING VERTICAL + HORIZONTAL -HYDRAULIC LUBRICATION FOR THE MILLING HEAD CENTRAL LUBRICATION SYSTEM INTERFACE RS 232 BALL SCREWS ON ALL THREE AXES WIDTH STABLE GUIDEWAYS COOLING PLANT WITH CHIP TRAY POWER 15KW TOTAL POWER 25KW FEED FORCE 10,000 NEWTON WEIGHT 4000KG -COMPLETE MACHINE DOCUMENTATION SPACE WITHOUT FULL CASING L X W X H APPROX. 3700 X 2200 X 2200 -THE MACHINE CAN BE VISITED BY APPOINTMENT, OF COURSE, A TRIAL RUN IS POSSIBLE. IN ADDITION TOOL HOLDERS AND VARIOUS ARE THE MACHINE, AS SHOWN ON THE PICTURE TO SEE THE TWO CARS, INCLUDING THE APPROXIMATELY 40 PCS. TOOLS, AS WELL AS A HYDRAULIC MACHINE VISE. THE MILLING MACHINE IS BUILT IN 1986 AND IS LOCATED IN A CLEAN CONDITION. COMMISSION: SALES IN THE SALES ORDER. NET PRICE: &ACIRC;?&NOT;7.900,00 + 19% VAT GROSS PRICE: &ACIRC;?&NOT;9.401,00 INCL. 19% VAT 87742 APFELTRACH, VISIT IS AT ANY TIME POSSIBLE AND DESIRABLE, FOR QUESTIONS ANDREAS WI&ATILDE;?MILLER AVAILABLE UNDER 0160/8037872 AVAILABLE. THE GOODS ARE SOLD AS SEEN AND TESTED EXCLUSIVELY FOR COMMERCIAL PURPOSES, WITHOUT ANY GUARANTEE AND WARRANTY! WE CAN ARRANGE THE PREPARATION OF EXPORT DOCUMENTS AND THE TRANSPORT FOR YOU WORLDWIDE. ALL INFORMATION WITHOUT GUARANTEE, ERRORS AND SPELLING MISTAKES, AND SUBJECT TO PRIOR SALE!
Vendedor: AW Handels GmbH
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>type hbc 100<br/>year of construction 1991, 2017 overhauled<br/>hours of operation 40,586 hours<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 3,15 m³<br/>theoretic cycle time 22 sec.<br/>bale size 750 x 1,100 mm, length variable<br/>driving motor 2 x 30 kw<br/>tying system 5 fold vertical, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm up to 12 tons/h<br/>bulk weight of 50 kg/cbm up to 25 tons/h<br/>bulk weight of 100 kg/cbm up to 47 tons/h<br/>bale weight 550 up to 850 kg, depends on material<br/>volume hydraulic oil tank 1,200 l<br/>sps controller (manuf., type)  telemecanique tsx micro<br/>operating panel (manuf., type)  schneider magelis touch panel<br/>transport dimensions only baler 11,750 x 2,250 x 3,150 mm (l x w x h)<br/>machine weight baler approx. 30 tons<br/><br/>comments:<br/>the machine has been overhauled. the following work was carried out or parts were replaced.<br/>this press has been overhauled. following steps of repair and overhauling have been taken:<br/><br/>elder sps controls including enter and exit component assemblies were replaced by new controls of telemécanique tsx micro and the input commands in    the touch panel translated into russian.<br/>manual service push buttons were replaced by schneider tft touch panel 7,5? of type magelis.<br/>upper and lower light barriers including repeater (telco) have been renewed.<br/>the electric connection at hydraulic manifold is new, with partially renewed machine control cables and removal of needless connection.<br/>hydraulic oil tank has been emptied, cleaned and all filters were renewed.<br/>rubber gear for diminishing pressure between pumps and electric motors were renewed.<br/>pipes between high pressure part of the pump and hydraulic manifold have been renewed.<br/>cartridge cap on manifold has been sealed up newly.<br/>rubber buffers of pre-press flap are new.<br/>filling level indicator at tank has been renewed.<br/>measurement connections at hydraulic tank were altered.<br/>all flanges of hydraulic pipes have been sealed up newly.<br/>main cylinder, clam shell cylinder, needle cylinder and cylinder for wire core have all been sealed up newly.<br/>plunger of main cylinder, of clam shell cylinder and of needle cylinder have been ground and chrome-plated newly.<br/>all rollers and guide pulleys of press ram have been cleaned and loosened, the front rollers were renewed.<br/>wire guidance was cleaned and loosened, the back wire guidance rollers and wire core with pinhead rollers have been renewed.<br/>pinheads including blades have been reworked.<br/>hinges at press channel, on lateral parts and cap have been renewed.<br/>all hydraulic hoses of clam shell cylinders have been renewed.<br/><br/>inspections in russia, near moscow are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYPE HBC 100
YEAR OF CONSTRUCTION 1991, 2017 OVERHAULED
HOURS OF OPERATION 40,586 HOURS
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 3,15 M³
THEORETIC CYCLE TIME 22 SEC.
BALE SIZE 750 X 1,100 MM, LENGTH VARIABLE
DRIVING MOTOR 2 X 30 KW
TYING SYSTEM 5 FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM UP TO 12 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 25 TONS/H
BULK WEIGHT OF 100 KG/CBM UP TO 47 TONS/H
BALE WEIGHT 550 UP TO 850 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 1,200 L
SPS CONTROLLER (MANUF., TYPE) TELEMECANIQUE TSX MICRO
OPERATING PANEL (MANUF., TYPE) SCHNEIDER MAGELIS TOUCH PANEL
TRANSPORT DIMENSIONS ONLY BALER 11,750 X 2,250 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 30 TONS

COMMENTS:
THE MACHINE HAS BEEN OVERHAULED. THE FOLLOWING WORK WAS CARRIED OUT OR PARTS WERE REPLACED.
THIS PRESS HAS BEEN OVERHAULED. FOLLOWING STEPS OF REPAIR AND OVERHAULING HAVE BEEN TAKEN:

ELDER SPS CONTROLS INCLUDING ENTER AND EXIT COMPONENT ASSEMBLIES WERE REPLACED BY NEW CONTROLS OF TELEMéCANIQUE TSX MICRO AND THE INPUT COMMANDS IN THE TOUCH PANEL TRANSLATED INTO RUSSIAN.
MANUAL SERVICE PUSH BUTTONS WERE REPLACED BY SCHNEIDER TFT TOUCH PANEL 7,5? OF TYPE MAGELIS.
UPPER AND LOWER LIGHT BARRIERS INCLUDING REPEATER (TELCO) HAVE BEEN RENEWED.
THE ELECTRIC CONNECTION AT HYDRAULIC MANIFOLD IS NEW, WITH PARTIALLY RENEWED MACHINE CONTROL CABLES AND REMOVAL OF NEEDLESS CONNECTION.
HYDRAULIC OIL TANK HAS BEEN EMPTIED, CLEANED AND ALL FILTERS WERE RENEWED.
RUBBER GEAR FOR DIMINISHING PRESSURE BETWEEN PUMPS AND ELECTRIC MOTORS WERE RENEWED.
PIPES BETWEEN HIGH PRESSURE PART OF THE PUMP AND HYDRAULIC MANIFOLD HAVE BEEN RENEWED.
CARTRIDGE CAP ON MANIFOLD HAS BEEN SEALED UP NEWLY.
RUBBER BUFFERS OF PRE-PRESS FLAP ARE NEW.
FILLING LEVEL INDICATOR AT TANK HAS BEEN RENEWED.
MEASUREMENT CONNECTIONS AT HYDRAULIC TANK WERE ALTERED.
ALL FLANGES OF HYDRAULIC PIPES HAVE BEEN SEALED UP NEWLY.
MAIN CYLINDER, CLAM SHELL CYLINDER, NEEDLE CYLINDER AND CYLINDER FOR WIRE CORE HAVE ALL BEEN SEALED UP NEWLY.
PLUNGER OF MAIN CYLINDER, OF CLAM SHELL CYLINDER AND OF NEEDLE CYLINDER HAVE BEEN GROUND AND CHROME-PLATED NEWLY.
ALL ROLLERS AND GUIDE PULLEYS OF PRESS RAM HAVE BEEN CLEANED AND LOOSENED, THE FRONT ROLLERS WERE RENEWED.
WIRE GUIDANCE WAS CLEANED AND LOOSENED, THE BACK WIRE GUIDANCE ROLLERS AND WIRE CORE WITH PINHEAD ROLLERS HAVE BEEN RENEWED.
PINHEADS INCLUDING BLADES HAVE BEEN REWORKED.
HINGES AT PRESS CHANNEL, ON LATERAL PARTS AND CAP HAVE BEEN RENEWED.
ALL HYDRAULIC HOSES OF CLAM SHELL CYLINDERS HAVE BEEN RENEWED.

INSPECTIONS IN RUSSIA, NEAR MOSCOW ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-we offer pallet racking new and used goods at low prices.

a pallet rack is probably the most popular way to store a large amount of pallets cheap and clean.

with us, you can get individual components for an extension of their camp, as well as large quantities of pallet racks with less delivery time.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.   WE OFFER PALLET RACKING NEW AND USED GOODS AT LOW PRICES. A PALLET RACK IS PROBABLY THE MOST POPULAR WAY TO STORE A LARGE AMOUNT OF PALLETS CHEAP AND CLEAN. WITH US, YOU CAN GET INDIVIDUAL COMPONENTS FOR AN EXTENSION OF THEIR CAMP, AS WELL AS LARGE QUANTITIES OF PALLET RACKS WITH LESS DELIVERY TIME. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-manufacturer presto<br/>typ hpk 50 hs<br/>year of construction 2012<br/>hours of operation 3,058 hours<br/>press power 50 tons<br/>specific press capacity 752 kn/m²<br/>feed channel 1,600 x 650 mm (l x w)<br/>capacity per cycle time 1,06 m³<br/>theoretic cycle time 19 sec.<br/>bale size 700 x 950 mm (w x h)<br/>driving motor 30 kw<br/>rated current 56 a<br/>tying system 4-fold horizontal, fully automated<br/>throughput rate at a<br/>bulk weight of 35 kg/cbm approx. 5,5 tons/hour<br/>bulk weight of 50 kg/cbm  approx. 8,8 tons/hour<br/>bulk weight of 100 kg/cbm  approx. 12,7 tons/hour<br/>bale weight  approx. 450 kg, depending on material<br/>sps controller (manuf., type) siemens s7 1200<br/>operating panel (manuf., type) siemens simatic touch<br/>space required  9,920 x 2,920 mm (l x w)<br/>transport dimensions only baler 8,420 x 1,770 x 2,400 mm (l x w x h)<br/>machine weight baler approx. 10,500 kg<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER PRESTO
TYP HPK 50 HS
YEAR OF CONSTRUCTION 2012
HOURS OF OPERATION 3,058 HOURS
PRESS POWER 50 TONS
SPECIFIC PRESS CAPACITY 752 KN/M²
FEED CHANNEL 1,600 X 650 MM (L X W)
CAPACITY PER CYCLE TIME 1,06 M³
THEORETIC CYCLE TIME 19 SEC.
BALE SIZE 700 X 950 MM (W X H)
DRIVING MOTOR 30 KW
RATED CURRENT 56 A
TYING SYSTEM 4-FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 35 KG/CBM APPROX. 5,5 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM APPROX. 8,8 TONS/HOUR
BULK WEIGHT OF 100 KG/CBM APPROX. 12,7 TONS/HOUR
BALE WEIGHT APPROX. 450 KG, DEPENDING ON MATERIAL
SPS CONTROLLER (MANUF., TYPE) SIEMENS S7 1200
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC TOUCH
SPACE REQUIRED 9,920 X 2,920 MM (L X W)
TRANSPORT DIMENSIONS ONLY BALER 8,420 X 1,770 X 2,400 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 10,500 KG

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 19.900 €
Ubicación: Land-tin snips, shears, shear (k020)

brand: volz
type: eurocut
year of production: around 1995
weight: approx. 10-12 tons
description: hydraulic bechschere volz eurocat with 3,000 mm max sheet width
max attack 1. 000mm, sheet thickness up to 12 mm
cutting angle adjustment, hydraulic clamp
condition: used, well maintained good condition, fully operational, loading possible

commission: sales in the sales order.

net price: â?¬19.900,00 + 19% vat (vat is shown)
gross price: â?¬23.681,00 incl. 19% vat

87742 apfeltrach, visit is at any time possible and desirable, for questions, andreas wiã?miller is available under the following telephone number: 0160/8037872 at your disposal. 

the goods are sold as seen and tested exclusively for commercial purposes, without any guarantee and warranty! 

we can arrange the preparation of export documents and the transport for you worldwide. 

all information without guarantee, errors and spelling mistakes, and subject to prior sale!
 TIN SNIPS, SHEARS, SHEAR (K020) BRAND: VOLZ TYPE: EUROCUT YEAR OF PRODUCTION: AROUND 1995 WEIGHT: APPROX. 10-12 TONS DESCRIPTION: HYDRAULIC BECHSCHERE VOLZ EUROCAT WITH 3,000 MM MAX SHEET WIDTH MAX ATTACK 1. 000MM, SHEET THICKNESS UP TO 12 MM CUTTING ANGLE ADJUSTMENT, HYDRAULIC CLAMP CONDITION: USED, WELL MAINTAINED GOOD CONDITION, FULLY OPERATIONAL, LOADING POSSIBLE COMMISSION: SALES IN THE SALES ORDER. NET PRICE: &ACIRC;?&NOT;19.900,00 + 19% VAT (VAT IS SHOWN) GROSS PRICE: &ACIRC;?&NOT;23.681,00 INCL. 19% VAT 87742 APFELTRACH, VISIT IS AT ANY TIME POSSIBLE AND DESIRABLE, FOR QUESTIONS, ANDREAS WI&ATILDE;?MILLER IS AVAILABLE UNDER THE FOLLOWING TELEPHONE NUMBER: 0160/8037872 AT YOUR DISPOSAL. THE GOODS ARE SOLD AS SEEN AND TESTED EXCLUSIVELY FOR COMMERCIAL PURPOSES, WITHOUT ANY GUARANTEE AND WARRANTY! WE CAN ARRANGE THE PREPARATION OF EXPORT DOCUMENTS AND THE TRANSPORT FOR YOU WORLDWIDE. ALL INFORMATION WITHOUT GUARANTEE, ERRORS AND SPELLING MISTAKES, AND SUBJECT TO PRIOR SALE!
Vendedor: AW Handels GmbH
Año de construcción: usado
Ubicación: Land-manufacturer hsm<br/>type vk 75 / 1600<br/>year of construction 1998<br/>hours of operation 54,412 hours, stand march<br/>press power main press 75 tons<br/>specific press capacity 99,2 n/cm²<br/>feed channel 720 x 1,600 mm (w x l)<br/>capacity per cycle time 1,21 m³<br/>theoretic cycle time 14,4 sec.<br/>theoretic  throughput rate 339 m³/h<br/>bale size 720 x 1,050 x 600 up to 1,200 mm (w x h x l)<br/>driving motor 55 kw, 500v, 50 hz, 79 a<br/>connected load 64 kw, 500 v, 98 a<br/>tying system 5-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 6,8 tons/h<br/>bulk weight of 50 kg/cbm up to 16,9 tons/h<br/>bale weight up to 620 kg/bale, depends on material<br/>volume hydraulic oil tank 1,250 l<br/>sps controller (manuf., type) siemens simatic s7 300<br/>operating panel (manuf., type)  siemens simatic multi panel<br/>transport dimensions only baler 6,180 x 2,250 x 3,260 mm (l x w x h)<br/>machine weight baler approx. 15,5 tons<br/>condition of the baler:<br/>the machine is in good condition, has been regularly serviced and is ready for immediate use.<br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER HSM
TYPE VK 75 / 1600
YEAR OF CONSTRUCTION 1998
HOURS OF OPERATION 54,412 HOURS, STAND MARCH
PRESS POWER MAIN PRESS 75 TONS
SPECIFIC PRESS CAPACITY 99,2 N/CM²
FEED CHANNEL 720 X 1,600 MM (W X L)
CAPACITY PER CYCLE TIME 1,21 M³
THEORETIC CYCLE TIME 14,4 SEC.
THEORETIC THROUGHPUT RATE 339 M³/H
BALE SIZE 720 X 1,050 X 600 UP TO 1,200 MM (W X H X L)
DRIVING MOTOR 55 KW, 500V, 50 HZ, 79 A
CONNECTED LOAD 64 KW, 500 V, 98 A
TYING SYSTEM 5-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 6,8 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 16,9 TONS/H
BALE WEIGHT UP TO 620 KG/BALE, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 1,250 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS SIMATIC S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC MULTI PANEL
TRANSPORT DIMENSIONS ONLY BALER 6,180 X 2,250 X 3,260 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 15,5 TONS
CONDITION OF THE BALER:
THE MACHINE IS IN GOOD CONDITION, HAS BEEN REGULARLY SERVICED AND IS READY FOR IMMEDIATE USE.
COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 2.933 €
Ubicación: Land-stud welder "arc" (k038)

brand: soyer
type: bmh 16 s
year of construction: 1995
with complete equipment
condition: good, used, ready to use, loading possible, shipping extra charge

commission: sales in the sales order.

net price: â?¬2932,78 + 19% vat
gross price: â?¬3.490,00 incl. 19% vat (vat is shown) 87742 apfeltrach, visit is at any time possible and desirable, for questions, andreas wiã?miller is available under the following telephone number: 0160/8037872 at your disposal. 

the goods are sold as seen and tested exclusively for commercial purposes, without any guarantee and warranty! 

all information without guarantee, errors and spelling mistakes, and subject to prior sale!
 STUD WELDER "ARC" (K038) BRAND: SOYER TYPE: BMH 16 S YEAR OF CONSTRUCTION: 1995 WITH COMPLETE EQUIPMENT CONDITION: GOOD, USED, READY TO USE, LOADING POSSIBLE, SHIPPING EXTRA CHARGE COMMISSION: SALES IN THE SALES ORDER. NET PRICE: &ACIRC;?&NOT;2932,78 + 19% VAT GROSS PRICE: &ACIRC;?&NOT;3.490,00 INCL. 19% VAT (VAT IS SHOWN) 87742 APFELTRACH, VISIT IS AT ANY TIME POSSIBLE AND DESIRABLE, FOR QUESTIONS, ANDREAS WI&ATILDE;?MILLER IS AVAILABLE UNDER THE FOLLOWING TELEPHONE NUMBER: 0160/8037872 AT YOUR DISPOSAL. THE GOODS ARE SOLD AS SEEN AND TESTED EXCLUSIVELY FOR COMMERCIAL PURPOSES, WITHOUT ANY GUARANTEE AND WARRANTY! ALL INFORMATION WITHOUT GUARANTEE, ERRORS AND SPELLING MISTAKES, AND SUBJECT TO PRIOR SALE!
Vendedor: AW Handels GmbH
Año de construcción: usado
Precio: 9.900 €
Ubicación: Land-manufacturer bollegraaf<br/>type as-75/850<br/>order-no. 96010.060<br/>year of construction 1996<br/>driving motor 75 kw<br/>width feed channel 850 mm <br/>quantity of waves 6 waves in the rotor<br/>qantitity of hammers 72 piece (6 waves with 12 hammer/wave)<br/>screen size 60 x 60 mm<br/>throughput capacity 2,000 up to 7,000 kg/hour,  depending on the size of the comminution<br/>transport dimensions only the mill approx. 2.670 x 2.040 x 2.565 mm (w x d x h)<br/>machine weight baler approx. 7,5 tons<br/> <br/>description: the bollegraaf hammer mills are characterised by a heavy steel construction with a wall thickness of 20 mm. the rotor and hammers are made of high-alloy steel. the two sieves can be swivelled in and out, whereby the size and throughput can be adjusted.<br/> <br/>comments: the machine has been tested with material and is in good condition, immediately ready for operation. inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYPE AS-75/850
ORDER-NO. 96010.060
YEAR OF CONSTRUCTION 1996
DRIVING MOTOR 75 KW
WIDTH FEED CHANNEL 850 MM
QUANTITY OF WAVES 6 WAVES IN THE ROTOR
QANTITITY OF HAMMERS 72 PIECE (6 WAVES WITH 12 HAMMER/WAVE)
SCREEN SIZE 60 X 60 MM
THROUGHPUT CAPACITY 2,000 UP TO 7,000 KG/HOUR, DEPENDING ON THE SIZE OF THE COMMINUTION
TRANSPORT DIMENSIONS ONLY THE MILL APPROX. 2.670 X 2.040 X 2.565 MM (W X D X H)
MACHINE WEIGHT BALER APPROX. 7,5 TONS

DESCRIPTION: THE BOLLEGRAAF HAMMER MILLS ARE CHARACTERISED BY A HEAVY STEEL CONSTRUCTION WITH A WALL THICKNESS OF 20 MM. THE ROTOR AND HAMMERS ARE MADE OF HIGH-ALLOY STEEL. THE TWO SIEVES CAN BE SWIVELLED IN AND OUT, WHEREBY THE SIZE AND THROUGHPUT CAN BE ADJUSTED.

COMMENTS: THE MACHINE HAS BEEN TESTED WITH MATERIAL AND IS IN GOOD CONDITION, IMMEDIATELY READY FOR OPERATION. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-spreader pad width 1810 mm ex miner dung-and compost spreaders m 92 sg,.
with 2 scatter shaft diameter approx. 520 mm. used part, bearing i.o.

more parts available.

-jacobis local, environmental & green care technology-
pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...
 SPREADER PAD WIDTH 1810 MM EX MINER DUNG-AND COMPOST SPREADERS M 92 SG,. WITH 2 SCATTER SHAFT DIAMETER APPROX. 520 MM. USED PART, BEARING I.O. MORE PARTS AVAILABLE. -JACOBIS LOCAL, ENVIRONMENTAL & GREEN CARE TECHNOLOGY- PRE-OWNED EQUIPMENT & SPORTS SQUARE CARE, GARDEN & LANDSCAPE CONSTRUCTION, CEMETERY TECHNOLOGY & WINTER MAINTENANCE, REVERSING OPERATIONS & DECOMMISSIONING, ENVIRONMENTAL CARE, MOTORS AND MORE...
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Precio: 34.900 €
Ubicación: Land-manufacturer bollegraaf<br/>type hbc 50<br/>year of construction 1990<br/>hours of operation 34,857 hours<br/>quantity of pressed bales 230,070 piece<br/>press power main press 55 tons<br/>specific press capacity 6,25 kg/cm²<br/>press power of pre-press 25 tons<br/>feed channel 1,320 x 1,100 mm (l x w)<br/>capacity per cycle time 2,45 cbm<br/>theoretic cycle time 30 sec.<br/>bale size 1,100 x 800 mm (w x h) length adjustable<br/>driving motor 37 kw<br/>tying system 5-fold vertical, fully automated<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 5,5 t/h<br/>bulk weight of 50 kg/cbm approx.12 t/h<br/>bulk weight of 100 kg/cbm approx. 20 t/h<br/>bale weight 380 up to 550 kg<br/>hydraulicoil 900 l<br/>plc siemens s5-100u<br/>transport dimensions only baler approx. 9,468 x 2,125 x 2,695  mm (l x w x h)<br/>machine weight baler approx. 20 tons<br/>comments the press with conveyor belt is ready for operation and in a good condition for this age. a inspection under power is possible by appointment. we will not assume liability for the given technical data and possible errors.<br/> <br/>technical data conveyor belt <br/>manufacturer bollegraaf<br/>typ hbt 600-1200<br/>year of construction 1990<br/>driving motor 5 kw<br/>length feeding conveyor approx. 6 m<br/>grade 30°<br/>effecting width 1,200 mm MANUFACTURER BOLLEGRAAF
TYPE HBC 50
YEAR OF CONSTRUCTION 1990
HOURS OF OPERATION 34,857 HOURS
QUANTITY OF PRESSED BALES 230,070 PIECE
PRESS POWER MAIN PRESS 55 TONS
SPECIFIC PRESS CAPACITY 6,25 KG/CM²
PRESS POWER OF PRE-PRESS 25 TONS
FEED CHANNEL 1,320 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 2,45 CBM
THEORETIC CYCLE TIME 30 SEC.
BALE SIZE 1,100 X 800 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 37 KW
TYING SYSTEM 5-FOLD VERTICAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 5,5 T/H
BULK WEIGHT OF 50 KG/CBM APPROX.12 T/H
BULK WEIGHT OF 100 KG/CBM APPROX. 20 T/H
BALE WEIGHT 380 UP TO 550 KG
HYDRAULICOIL 900 L
PLC SIEMENS S5-100U
TRANSPORT DIMENSIONS ONLY BALER APPROX. 9,468 X 2,125 X 2,695 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 20 TONS
COMMENTS THE PRESS WITH CONVEYOR BELT IS READY FOR OPERATION AND IN A GOOD CONDITION FOR THIS AGE. A INSPECTION UNDER POWER IS POSSIBLE BY APPOINTMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.

TECHNICAL DATA CONVEYOR BELT
MANUFACTURER BOLLEGRAAF
TYP HBT 600-1200
YEAR OF CONSTRUCTION 1990
DRIVING MOTOR 5 KW
LENGTH FEEDING CONVEYOR APPROX. 6 M
GRADE 30°
EFFECTING WIDTH 1,200 MM
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-offer consists of:-paper - folding machine dc-445 / dc-f1

docucutter of duplo dc-445 / dc-f1
scribers / folding machine for digital printing:

creasing machine dc-445:

-feeding: band with suction device
-capacity of the feeder: 100 mm

-paper size in the feed:
width: 140 mm - 320 mm
length: 150 mm, deep 650 mm
standard tray holds documents with a length of up to 460 mm
an optional feeder tray in long version is available for longer documents.

minimum end machining size at the slitter (optional equipment): width 48.0 mm

-type of paper: uncoated paper, coated paper, laminated paper
-paper weight: 110 g / m2 - 300 g / m2
paper waves in +/-3 mm

-speed: 50 ppm (a4 sef 1 groover)
-grooves: max 15 grooves per document
-grooves precision: +/-0.3 mm
-groove depth adjustment: 3 steps (from the control panel)
-output tray: 110 mm
-control panel: 64 point x 128 dot lcd

-standard function: memory for up to 30 jobs test feeder sloping adjustment
-optional features:
air pressure gauge (compressor for additional paper separation for the supply)
double sheet detection
long paper feeder tray stand (up to 650 mm)
slitter unit (additional equipment required) hole puncher (additional equipment required)

-power supply 115 vac model: 115 vac, 50/60 hz
-power supply 230 vac model: 230 vac, 50 hz

-dimensions: use: 1262 mm (b) x 618,2 mm (d) x 573,3 mm (h)
-weight: 105 kg

folding machine dc-f1:

-supply: no feeding mechanism
the paper feed roller takes paper from the upstream device. * when connecting to dc-645/615: dc-sc1 required.
when connecting to dc-445: direct connection possible.

-paper size feed:
no groove: width 48 mm - 370 mm, length 85 mm - 650 mm
1 groove: width 48 mm - 370 mm, length 170 mm - 650 mm
2 fold: width 48 mm - 370 mm, length 170 mm - 650 mm
3 fold: width 48 mm - 370 mm, length 170 mm - 650 mm
paper format depends on which paper from the upstream device.

-finished paper size:
no groove: width 48 mm - 370 mm, length 85 mm - 650 mm
1 groove: width 48 mm - 370 mm, length 85 mm - (650 mm - 42.5 mm)
2 fold: width 48 mm - 370 mm, length 85 mm - (650 mm - 42.5 mm x 2)
paper format depends on which paper from the upstream device.

-paper weight:
glued paper: minimum: 110 g / m2, max: 350 g / m2
coated paper: minimum: 110 g / m2, max: 350 g / m2
laminated paper: in the above specified weight range including lamination
* maximum paper weight for double gate-fold is 230 g / m2.

-paper type: bonded, coated, laminated

-speed: 50 sheets / min.
a4 (210 mm width x length 297 mm) + 1 central groove 1 groove knife 1 * depends on the speed of the upstream devices.

-minimum seam length: 85 mm
-minimum seam interval: 42.5 mm
-folding tolerance: is processed in the groove width
-ausgangstransport: no stack mechanism
must be connected to dc-st1, st2 dc, dc-cc1

-control panel: 64 dpi x 128 dpi lcd

-standard features: 80 job space
folding position adjustment (for each folding knife)
communication between devices
dc-sc1 control (required for connection to dc-645/615)

-power supply: single application
100-240 vac + 6% / -10%, 50/60 hz, 1.9 0.9 a

-dimensions:
757 mm (b) x 822 mm (d) x 1,493 mm (h)
(the amount varies depending on the connected dc and dc-f1 device.)
-weight: approx. 95 kg

sheet transport dc-sc1

-supply: no feeding mechanism
recording multiple arch, who come from the upstream device, transport rollers.

-paper size feed:
no groove: width 48 mm - 370 mm, length 85 mm - 650 mm
1 groove: width 48 mm - 370 mm, length 170 mm - 650 mm
2 fold: width 48 mm - 370 mm, length 170 mm - 650 mm (paper format depends on which paper from the upstream device)

-paper weight:
glued min.: 110 g / m2, max: 350 g / m2
coated min.: 110 g / m2, max: 350 g / m2
concealed: in the above specified weight range including lamination

-type of paper: bond, laminated coated,
-minimum size finished paper: width 48 mm x length 85 mm
(when using dc-cc1: width 48 mm x length 85 mm)

-requirements:
when cutting multiple documents on the connected dc-645/615-device
-longitudinal gutter between each sheet on 1 document must be at least 5 mm.
-cross section of gutter between each sheet on 1 document must be at least 4 mm.

-speed: depending on the speed of the dc-f1
-ausgangstransport: the blade to transport rollers of the dc-f1 with output roller transports.
-power supply: from dc-f1.

-dimensions: 701 mm (b) x 558 mm (d) x 1.085 mm (h)
height depends on the upstream device of dc and for stored dc-f1 device.
-weight: approx. 65 kg

-weight: 297kg

on request, we can organize for you the following points:

packing, loading, transport (by ship or airplane) including customs clearance OFFER CONSISTS OF:-PAPER - FOLDING MACHINE DC-445 / DC-F1 DOCUCUTTER OF DUPLO DC-445 / DC-F1 SCRIBERS / FOLDING MACHINE FOR DIGITAL PRINTING: CREASING MACHINE DC-445: -FEEDING: BAND WITH SUCTION DEVICE -CAPACITY OF THE FEEDER: 100 MM -PAPER SIZE IN THE FEED: WIDTH: 140 MM - 320 MM LENGTH: 150 MM, DEEP 650 MM STANDARD TRAY HOLDS DOCUMENTS WITH A LENGTH OF UP TO 460 MM AN OPTIONAL FEEDER TRAY IN LONG VERSION IS AVAILABLE FOR LONGER DOCUMENTS. MINIMUM END MACHINING SIZE AT THE SLITTER (OPTIONAL EQUIPMENT): WIDTH 48.0 MM -TYPE OF PAPER: UNCOATED PAPER, COATED PAPER, LAMINATED PAPER -PAPER WEIGHT: 110 G / M2 - 300 G / M2 PAPER WAVES IN +/-3 MM -SPEED: 50 PPM (A4 SEF 1 GROOVER) -GROOVES: MAX 15 GROOVES PER DOCUMENT -GROOVES PRECISION: +/-0.3 MM -GROOVE DEPTH ADJUSTMENT: 3 STEPS (FROM THE CONTROL PANEL) -OUTPUT TRAY: 110 MM -CONTROL PANEL: 64 POINT X 128 DOT LCD -STANDARD FUNCTION: MEMORY FOR UP TO 30 JOBS TEST FEEDER SLOPING ADJUSTMENT -OPTIONAL FEATURES: AIR PRESSURE GAUGE (COMPRESSOR FOR ADDITIONAL PAPER SEPARATION FOR THE SUPPLY) DOUBLE SHEET DETECTION LONG PAPER FEEDER TRAY STAND (UP TO 650 MM) SLITTER UNIT (ADDITIONAL EQUIPMENT REQUIRED) HOLE PUNCHER (ADDITIONAL EQUIPMENT REQUIRED) -POWER SUPPLY 115 VAC MODEL: 115 VAC, 50/60 HZ -POWER SUPPLY 230 VAC MODEL: 230 VAC, 50 HZ -DIMENSIONS: USE: 1262 MM (B) X 618,2 MM (D) X 573,3 MM (H) -WEIGHT: 105 KG FOLDING MACHINE DC-F1: -SUPPLY: NO FEEDING MECHANISM THE PAPER FEED ROLLER TAKES PAPER FROM THE UPSTREAM DEVICE. * WHEN CONNECTING TO DC-645/615: DC-SC1 REQUIRED. WHEN CONNECTING TO DC-445: DIRECT CONNECTION POSSIBLE. -PAPER SIZE FEED: NO GROOVE: WIDTH 48 MM - 370 MM, LENGTH 85 MM - 650 MM 1 GROOVE: WIDTH 48 MM - 370 MM, LENGTH 170 MM - 650 MM 2 FOLD: WIDTH 48 MM - 370 MM, LENGTH 170 MM - 650 MM 3 FOLD: WIDTH 48 MM - 370 MM, LENGTH 170 MM - 650 MM PAPER FORMAT DEPENDS ON WHICH PAPER FROM THE UPSTREAM DEVICE. -FINISHED PAPER SIZE: NO GROOVE: WIDTH 48 MM - 370 MM, LENGTH 85 MM - 650 MM 1 GROOVE: WIDTH 48 MM - 370 MM, LENGTH 85 MM - (650 MM - 42.5 MM) 2 FOLD: WIDTH 48 MM - 370 MM, LENGTH 85 MM - (650 MM - 42.5 MM X 2) PAPER FORMAT DEPENDS ON WHICH PAPER FROM THE UPSTREAM DEVICE. -PAPER WEIGHT: GLUED PAPER: MINIMUM: 110 G / M2, MAX: 350 G / M2 COATED PAPER: MINIMUM: 110 G / M2, MAX: 350 G / M2 LAMINATED PAPER: IN THE ABOVE SPECIFIED WEIGHT RANGE INCLUDING LAMINATION * MAXIMUM PAPER WEIGHT FOR DOUBLE GATE-FOLD IS 230 G / M2. -PAPER TYPE: BONDED, COATED, LAMINATED -SPEED: 50 SHEETS / MIN. A4 (210 MM WIDTH X LENGTH 297 MM) + 1 CENTRAL GROOVE 1 GROOVE KNIFE 1 * DEPENDS ON THE SPEED OF THE UPSTREAM DEVICES. -MINIMUM SEAM LENGTH: 85 MM -MINIMUM SEAM INTERVAL: 42.5 MM -FOLDING TOLERANCE: IS PROCESSED IN THE GROOVE WIDTH -AUSGANGSTRANSPORT: NO STACK MECHANISM MUST BE CONNECTED TO DC-ST1, ST2 DC, DC-CC1 -CONTROL PANEL: 64 DPI X 128 DPI LCD -STANDARD FEATURES: 80 JOB SPACE FOLDING POSITION ADJUSTMENT (FOR EACH FOLDING KNIFE) COMMUNICATION BETWEEN DEVICES DC-SC1 CONTROL (REQUIRED FOR CONNECTION TO DC-645/615) -POWER SUPPLY: SINGLE APPLICATION 100-240 VAC + 6% / -10%, 50/60 HZ, 1.9 0.9 A -DIMENSIONS: 757 MM (B) X 822 MM (D) X 1,493 MM (H) (THE AMOUNT VARIES DEPENDING ON THE CONNECTED DC AND DC-F1 DEVICE.) -WEIGHT: APPROX. 95 KG SHEET TRANSPORT DC-SC1 -SUPPLY: NO FEEDING MECHANISM RECORDING MULTIPLE ARCH, WHO COME FROM THE UPSTREAM DEVICE, TRANSPORT ROLLERS. -PAPER SIZE FEED: NO GROOVE: WIDTH 48 MM - 370 MM, LENGTH 85 MM - 650 MM 1 GROOVE: WIDTH 48 MM - 370 MM, LENGTH 170 MM - 650 MM 2 FOLD: WIDTH 48 MM - 370 MM, LENGTH 170 MM - 650 MM (PAPER FORMAT DEPENDS ON WHICH PAPER FROM THE UPSTREAM DEVICE) -PAPER WEIGHT: GLUED MIN.: 110 G / M2, MAX: 350 G / M2 COATED MIN.: 110 G / M2, MAX: 350 G / M2 CONCEALED: IN THE ABOVE SPECIFIED WEIGHT RANGE INCLUDING LAMINATION -TYPE OF PAPER: BOND, LAMINATED COATED, -MINIMUM SIZE FINISHED PAPER: WIDTH 48 MM X LENGTH 85 MM (WHEN USING DC-CC1: WIDTH 48 MM X LENGTH 85 MM) -REQUIREMENTS: WHEN CUTTING MULTIPLE DOCUMENTS ON THE CONNECTED DC-645/615-DEVICE -LONGITUDINAL GUTTER BETWEEN EACH SHEET ON 1 DOCUMENT MUST BE AT LEAST 5 MM. -CROSS SECTION OF GUTTER BETWEEN EACH SHEET ON 1 DOCUMENT MUST BE AT LEAST 4 MM. -SPEED: DEPENDING ON THE SPEED OF THE DC-F1 -AUSGANGSTRANSPORT: THE BLADE TO TRANSPORT ROLLERS OF THE DC-F1 WITH OUTPUT ROLLER TRANSPORTS. -POWER SUPPLY: FROM DC-F1. -DIMENSIONS: 701 MM (B) X 558 MM (D) X 1.085 MM (H) HEIGHT DEPENDS ON THE UPSTREAM DEVICE OF DC AND FOR STORED DC-F1 DEVICE. -WEIGHT: APPROX. 65 KG -WEIGHT: 297KG ON REQUEST, WE CAN ORGANIZE FOR YOU THE FOLLOWING POINTS: PACKING, LOADING, TRANSPORT (BY SHIP OR AIRPLANE) INCLUDING CUSTOMS CLEARANCE
Vendedor: LA-POSTPRESS Landauer Alexander
Año de construcción: usado
Ubicación: Land-manufacturer lyndex<br/>typ  bimax 12/110<br/>year of construction 2006<br/>hours of operation 20,661 h, stand jun <br/>quantity of pressed bales 31,632 piece, stand jun<br/>press power main press 120 tons<br/>specific press capacity 10 kg/cm²<br/>press power free stamper 24 tons<br/>feed channel 2,000/1,400 x 1,040 mm<br/>bale size 1,100 x 1,100 mm, length variable<br/>driving motor 3 x 45 kw<br/>rated current 260 a<br/>tying system 5 fold vertical, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 up tp 30 kg/cbm approx. 10 up to 12 tons/h<br/>bulk weight of 50 up to 60 kg/cbm  approx. 18 up to 26 tons/h<br/>bulk weight of 70 up to 100 kg/cbm  approx. 28 up to 40 tons/h<br/>throughput rate with ruffler  approx. 10 up to 12 tons/h<br/>bale weight 650 up to 950 kg, depends on material and bale lenght<br/>volume hydraulic oil tank 3,100 l<br/>sps controller (manuf., type) siemens s7 300<br/>operating panel (manuf., type)  siemens simatic multi panel<br/>transport dimensions only baler 11,800 x 2,400 x 3,550 mm<br/>machine weight baler approx. 35 tons<br/>accessories ruffler, 15 kw<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER LYNDEX
TYP BIMAX 12/110
YEAR OF CONSTRUCTION 2006
HOURS OF OPERATION 20,661 H, STAND JUN
QUANTITY OF PRESSED BALES 31,632 PIECE, STAND JUN
PRESS POWER MAIN PRESS 120 TONS
SPECIFIC PRESS CAPACITY 10 KG/CM²
PRESS POWER FREE STAMPER 24 TONS
FEED CHANNEL 2,000/1,400 X 1,040 MM
BALE SIZE 1,100 X 1,100 MM, LENGTH VARIABLE
DRIVING MOTOR 3 X 45 KW
RATED CURRENT 260 A
TYING SYSTEM 5 FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 UP TP 30 KG/CBM APPROX. 10 UP TO 12 TONS/H
BULK WEIGHT OF 50 UP TO 60 KG/CBM APPROX. 18 UP TO 26 TONS/H
BULK WEIGHT OF 70 UP TO 100 KG/CBM APPROX. 28 UP TO 40 TONS/H
THROUGHPUT RATE WITH RUFFLER APPROX. 10 UP TO 12 TONS/H
BALE WEIGHT 650 UP TO 950 KG, DEPENDS ON MATERIAL AND BALE LENGHT
VOLUME HYDRAULIC OIL TANK 3,100 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC MULTI PANEL
TRANSPORT DIMENSIONS ONLY BALER 11,800 X 2,400 X 3,550 MM
MACHINE WEIGHT BALER APPROX. 35 TONS
ACCESSORIES RUFFLER, 15 KW

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 180 €
Ubicación: Land-1 x pallet rack

data:
-h: approx. 200 cm
-t: approx. 110 cm
-l: 280 cm

-offer
-used in a technically perfect condition.
-stand blue
-traverses 270 cm
-trusses in orange

shelf consists of:
-2 x stand approx. 200 x 110 cm
-traverse 4 x 270 cm
-incl. locking pins
-evaluates 9 pallet places.

price:
â?¬180 net
â?¬214,20 gross
you will receive an invoice with expelled vat

accessories such as ground anchors, starting-up protection, etc. can be purchased also from us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible.      1 X PALLET RACK DATA: -H: APPROX. 200 CM -T: APPROX. 110 CM -L: 280 CM -OFFER -USED IN A TECHNICALLY PERFECT CONDITION. -STAND BLUE -TRAVERSES 270 CM -TRUSSES IN ORANGE SHELF CONSISTS OF: -2 X STAND APPROX. 200 X 110 CM -TRAVERSE 4 X 270 CM -INCL. LOCKING PINS -EVALUATES 9 PALLET PLACES. PRICE: &ACIRC;?&NOT;180 NET &ACIRC;?&NOT;214,20 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT ACCESSORIES SUCH AS GROUND ANCHORS, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED ALSO FROM US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-manufacturer paal<br/>typ konti 425 e<br/>year of construction 2007<br/>hours of operation 33,959 hours<br/>press power 100 tons (120 tons at 300 bar)<br/>specific press capacity 121,1 tons/m²<br/>feed channel 2,000 x 1,020 mm (l x w)<br/>throughput rate under operating conditions 375 m³/hour<br/>theoretic  throughput rate 780 m³/hour<br/>bale size 1,100 x 750 mm (w x h)<br/>driving motor 2 x 45 kw<br/>connected load 108 kw<br/>rated current 210 a<br/>tying system 5-fold vertical, fully automated<br/>throughput rate at a<br/>bulk weight of 35 kg/cbm approx. 13 tons/hour<br/>bulk weight of 60 kg/cbm  approx. 22 tons/hour<br/>bulk weight of 100 kg/cbm  approx. 35 tons/hour<br/>bale weight 550 up to 750 kg, depends on material<br/>volume hydraulic oil tank 3,100 l<br/>sps controller (manuf., type) siemens s7 300<br/>operating panel (manuf., type) siemens multi panel<br/>transport dimensions only baler 14,827 x 2,352 x 3,210 mm<br/>machine weight baler approx. 38 tons<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER PAAL
TYP KONTI 425 E
YEAR OF CONSTRUCTION 2007
HOURS OF OPERATION 33,959 HOURS
PRESS POWER 100 TONS (120 TONS AT 300 BAR)
SPECIFIC PRESS CAPACITY 121,1 TONS/M²
FEED CHANNEL 2,000 X 1,020 MM (L X W)
THROUGHPUT RATE UNDER OPERATING CONDITIONS 375 M³/HOUR
THEORETIC THROUGHPUT RATE 780 M³/HOUR
BALE SIZE 1,100 X 750 MM (W X H)
DRIVING MOTOR 2 X 45 KW
CONNECTED LOAD 108 KW
RATED CURRENT 210 A
TYING SYSTEM 5-FOLD VERTICAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 35 KG/CBM APPROX. 13 TONS/HOUR
BULK WEIGHT OF 60 KG/CBM APPROX. 22 TONS/HOUR
BULK WEIGHT OF 100 KG/CBM APPROX. 35 TONS/HOUR
BALE WEIGHT 550 UP TO 750 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 3,100 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS MULTI PANEL
TRANSPORT DIMENSIONS ONLY BALER 14,827 X 2,352 X 3,210 MM
MACHINE WEIGHT BALER APPROX. 38 TONS

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 800 €
Ubicación: Land-1 x pallet rack jungheinrich used goods

data:
-h: 600 cm
-t: 105 cm
-l: approx. 14.4 yds

-special offer
-jh delta vintage cameras
-stand blue
-traverses 350 cm
-trusses in orange

shelf consists of:
-5 x stand 600 x 105 cm
-traverse 24 x 350 cm
-incl. locking pins
-results in 40 pallets.
-3 levels + ground.

price:
â?¬800 net
â?¬952 gross
you will receive an invoice with expelled vat

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible.    1 X PALLET RACK JUNGHEINRICH USED GOODS DATA: -H: 600 CM -T: 105 CM -L: APPROX. 14.4 YDS -SPECIAL OFFER -JH DELTA VINTAGE CAMERAS -STAND BLUE -TRAVERSES 350 CM -TRUSSES IN ORANGE SHELF CONSISTS OF: -5 X STAND 600 X 105 CM -TRAVERSE 24 X 350 CM -INCL. LOCKING PINS -RESULTS IN 40 PALLETS. -3 LEVELS + GROUND. PRICE: &ACIRC;?&NOT;800 NET &ACIRC;?&NOT;952 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-manufacturer boa<br/>type impress d130-110-b-5v-5h-1.6<br/>year of construction 2008<br/>hours of operation 24.929 h, stand mai<br/>press power main press 127 tons<br/>specific press capacity 10,5 kg/ cm²<br/>feed channel 1,620 x 1,000 mm<br/>capacity per cycle time 4,1 cbm<br/>cycle time under operating conditions 22 sec.<br/>throughput rate under operating conditions up to 865 cbm/h<br/>bale size 1,100 x 1,100 mm, length variable<br/>driving motor 2 x 55 kw<br/>connected load 155 kw<br/>tying system 5 fold vertical, 5 fold  horizontal, full automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx. 17 tons/h<br/>bulk weight of 50 kg/cbm  approx. 29 tons/h<br/>bulk weight of 100 kg/cbm approx. 37 tons/h<br/>bale weight up to 1,200 kg<br/>volume hydraulic oil tank 2,100 l<br/>sps controller (manuf., type) siemens s7<br/>operating panel (manuf., type)  siemens touchscreen<br/>baler dimensions built up with hopper 11.310 x 2.759 x 6.913 mm (l x w x h)<br/>machine weight baler approx. 40 tons<br/><br/>comments:<br/>the baler is in good condition and will be replaced with a new one in the 4th quarter. the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOA
TYPE IMPRESS D130-110-B-5V-5H-1.6
YEAR OF CONSTRUCTION 2008
HOURS OF OPERATION 24.929 H, STAND MAI
PRESS POWER MAIN PRESS 127 TONS
SPECIFIC PRESS CAPACITY 10,5 KG/ CM²
FEED CHANNEL 1,620 X 1,000 MM
CAPACITY PER CYCLE TIME 4,1 CBM
CYCLE TIME UNDER OPERATING CONDITIONS 22 SEC.
THROUGHPUT RATE UNDER OPERATING CONDITIONS UP TO 865 CBM/H
BALE SIZE 1,100 X 1,100 MM, LENGTH VARIABLE
DRIVING MOTOR 2 X 55 KW
CONNECTED LOAD 155 KW
TYING SYSTEM 5 FOLD VERTICAL, 5 FOLD HORIZONTAL, FULL AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 17 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 29 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 37 TONS/H
BALE WEIGHT UP TO 1,200 KG
VOLUME HYDRAULIC OIL TANK 2,100 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS S7
OPERATING PANEL (MANUF., TYPE) SIEMENS TOUCHSCREEN
BALER DIMENSIONS BUILT UP WITH HOPPER 11.310 X 2.759 X 6.913 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 40 TONS

COMMENTS:
THE BALER IS IN GOOD CONDITION AND WILL BE REPLACED WITH A NEW ONE IN THE 4TH QUARTER. THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 4.570 €
Ubicación: Land-pallet racks nedcon immediately from stock
vintage cameras

data:
-h: 365 cm
-t: approx. 110 cm
-l: approx. 90 yds

-nedcon vintage cameras
-1000 kg per pallet space
-stand in bright zinc-plated
-trusses 290 cm
-trusses in orange

shelf consists of:
-stand 31 x 365 cm
-30 x fields a. 290 cm
-traverse 120 x 290 cm
-produces 270 pallet places.

price:
â?¬4570 net
â?¬5438,30 gross
you will receive an invoice with expelled vat

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.  PALLET RACKS NEDCON IMMEDIATELY FROM STOCK VINTAGE CAMERAS DATA: -H: 365 CM -T: APPROX. 110 CM -L: APPROX. 90 YDS -NEDCON VINTAGE CAMERAS -1000 KG PER PALLET SPACE -STAND IN BRIGHT ZINC-PLATED -TRUSSES 290 CM -TRUSSES IN ORANGE SHELF CONSISTS OF: -STAND 31 X 365 CM -30 X FIELDS A. 290 CM -TRAVERSE 120 X 290 CM -PRODUCES 270 PALLET PLACES. PRICE: &ACIRC;?&NOT;4570 NET &ACIRC;?&NOT;5438,30 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-manufacturer strautmann<br/>typ bale tainer<br/>year of construction 2010<br/>hours of operation 4.100 hours<br/>press power main press 60 tons<br/>feed channel 2,815 x 1,085 mm (l x w)<br/>bale size 1,100 x 1,100 x 700 mm (w x d x h)<br/>driving motor 9,2 kw<br/>connected load 15 kw<br/>tying system 4 fold vertical, fully automated<br/>bale weight up to 400 kg, depends on material<br/>sps controller (manuf., type) siemens s7 1200<br/>operating panel (manuf., type) siemens simatic touch panel<br/>baler dimensions built up with hopper approx. 8,841 x 3,140 x 3,100 mm (l x w x h)<br/>transport* dimensions only baler approx. 5,650 x 2,100 x 2,850 mm (l x w x h)<br/>machine weight baler 7,38 tons<br/> <br/>comments: the baler is in good condition and after assembly immediately ready for operation.<br/><br/>inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER STRAUTMANN
TYP BALE TAINER
YEAR OF CONSTRUCTION 2010
HOURS OF OPERATION 4.100 HOURS
PRESS POWER MAIN PRESS 60 TONS
FEED CHANNEL 2,815 X 1,085 MM (L X W)
BALE SIZE 1,100 X 1,100 X 700 MM (W X D X H)
DRIVING MOTOR 9,2 KW
CONNECTED LOAD 15 KW
TYING SYSTEM 4 FOLD VERTICAL, FULLY AUTOMATED
BALE WEIGHT UP TO 400 KG, DEPENDS ON MATERIAL
SPS CONTROLLER (MANUF., TYPE) SIEMENS S7 1200
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC TOUCH PANEL
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX. 8,841 X 3,140 X 3,100 MM (L X W X H)
TRANSPORT* DIMENSIONS ONLY BALER APPROX. 5,650 X 2,100 X 2,850 MM (L X W X H)
MACHINE WEIGHT BALER 7,38 TONS

COMMENTS: THE BALER IS IN GOOD CONDITION AND AFTER ASSEMBLY IMMEDIATELY READY FOR OPERATION.

INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 1.270 €
Ubicación: Land-1 x pallet rack jungheinrich mp
vintage cameras

data:
-h: 450 cm
-t: approx. 110 cm
-l: approx. 22.4 yds

-special offer
-jungheinrich used goods
-stand blue
-traverses 270 cm
-trusses in yellow
-floor + 2 levels

shelf consists of:
-stand 9 x 450 x 110 cm
-traverse 32 x 270 cm
-incl. locking pins
-produces 72 pallet places.

price:
â?¬1270 net
â?¬1511,30 gross
you will receive an invoice with expelled vat

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible.    1 X PALLET RACK JUNGHEINRICH MP VINTAGE CAMERAS DATA: -H: 450 CM -T: APPROX. 110 CM -L: APPROX. 22.4 YDS -SPECIAL OFFER -JUNGHEINRICH USED GOODS -STAND BLUE -TRAVERSES 270 CM -TRUSSES IN YELLOW -FLOOR + 2 LEVELS SHELF CONSISTS OF: -STAND 9 X 450 X 110 CM -TRAVERSE 32 X 270 CM -INCL. LOCKING PINS -PRODUCES 72 PALLET PLACES. PRICE: &ACIRC;?&NOT;1270 NET &ACIRC;?&NOT;1511,30 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Precio: 26.500 €
Ubicación: Land-manufacturer lindemann<br/>typ bigro 1027 v<br/>year of construction 1989<br/>press power main press 100 tons<br/>specific press capacity 12,1 kg/cm²<br/>press power free stamper 24 tons<br/>feed channel 1,060 x 1,400 / 2,000 mm (l x w)<br/>bale size 1,100 x 750 mm (w x h) length adjustable<br/>driving motor 2 x 55 kw<br/>connected load 138 kw<br/>tying system 4-fold vertical, fully automated<br/>throughput rate at a  <br/>bulk weight of 20 up to 30 kg/cbm approx. 8 up to 11 to/h<br/>bulk weight of 40 up to 60 kg/cbm approx. 13 up to 16 to/h<br/>bulk weight of 70  up to 100 kg/cbm approx. 19 up to 23 to/h<br/>bale weight 520 up to 720 kg depending on material<br/>volume hydraulic oil tank 2,700 l<br/>sps controller (manuf., type) siemens s5 115 u cpu 941 with e-prom<br/>baler dimensions built up with hopper approx. 11,750 x 2,530 x 3,720 mm (l x w x h)<br/>transport dimensions only baler approx. 11,750 x 2,530 x 2,450 mm (l x w x h)<br/>machine weight baler approx. 26 tons<br/>accessories (ruffler, pre-compressor, perforator, conveyor belt, etc.)  ruffler with adjustable feed channel length 1,400 up to 2,000 mm<br/>condition of the baler, conveyor belt good condition for this age. baler is actual in working condition.<br/> <br/>comments: inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors.<br/> <br/>technical data conveyor belt <br/>manufacturer ama werke<br/>typ kgf 2000-20750<br/>year of construction 05/2006<br/>length feeding conveyor 9,800 mm<br/>effecting width 1,910 mm<br/>height drive axle over ground approx. 4,000 mm<br/>height of side wall feeding conv. 600 mm<br/>height of side wall elevating conv. 800 mm MANUFACTURER LINDEMANN
TYP BIGRO 1027 V
YEAR OF CONSTRUCTION 1989
PRESS POWER MAIN PRESS 100 TONS
SPECIFIC PRESS CAPACITY 12,1 KG/CM²
PRESS POWER FREE STAMPER 24 TONS
FEED CHANNEL 1,060 X 1,400 / 2,000 MM (L X W)
BALE SIZE 1,100 X 750 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 2 X 55 KW
CONNECTED LOAD 138 KW
TYING SYSTEM 4-FOLD VERTICAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 UP TO 30 KG/CBM APPROX. 8 UP TO 11 TO/H
BULK WEIGHT OF 40 UP TO 60 KG/CBM APPROX. 13 UP TO 16 TO/H
BULK WEIGHT OF 70 UP TO 100 KG/CBM APPROX. 19 UP TO 23 TO/H
BALE WEIGHT 520 UP TO 720 KG DEPENDING ON MATERIAL
VOLUME HYDRAULIC OIL TANK 2,700 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS S5 115 U CPU 941 WITH E-PROM
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX. 11,750 X 2,530 X 3,720 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX. 11,750 X 2,530 X 2,450 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 26 TONS
ACCESSORIES (RUFFLER, PRE-COMPRESSOR, PERFORATOR, CONVEYOR BELT, ETC.) RUFFLER WITH ADJUSTABLE FEED CHANNEL LENGTH 1,400 UP TO 2,000 MM
CONDITION OF THE BALER, CONVEYOR BELT GOOD CONDITION FOR THIS AGE. BALER IS ACTUAL IN WORKING CONDITION.

COMMENTS: INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.

TECHNICAL DATA CONVEYOR BELT
MANUFACTURER AMA WERKE
TYP KGF 2000-20750
YEAR OF CONSTRUCTION 05/2006
LENGTH FEEDING CONVEYOR 9,800 MM
EFFECTING WIDTH 1,910 MM
HEIGHT DRIVE AXLE OVER GROUND APPROX. 4,000 MM
HEIGHT OF SIDE WALL FEEDING CONV. 600 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 800 MM
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 80 €
Ubicación: Land-welding screen

-used.
-color: red.
-size: 260 x 180 cm
-frame: 30 x 30 mm.
-price per piece.

-several available -.

price:
â?¬80,00 net
â?¬95,20 gross
you will receive an invoice with expelled vat

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.      WELDING SCREEN -USED. -COLOR: RED. -SIZE: 260 X 180 CM -FRAME: 30 X 30 MM. -PRICE PER PIECE. -SEVERAL AVAILABLE -. PRICE: &ACIRC;?&NOT;80,00 NET &ACIRC;?&NOT;95,20 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-manufacturer bauer<br/>typ 500<br/>year of construction 1994 <br/>hours of operation 26,663 hours<br/>press power main press 50 tons<br/>press power free stamper 24 tons<br/>feed channel 1,800 x 1,020 mm (l x w)<br/>capacity per cycle time 2 cbm<br/>theoretic  throughput rate 350 cbm/h<br/>throughput rate under operation 180 cbm/h<br/>bale size 1,100 x 680 mm (w x h) length adjustable<br/>driving motor 2 x 22 kw<br/>tying system 4-fold vertical, fully automated<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 3 up to 5 t/h<br/>bulk weight of 50 kg/cbm approx. 4 up to 8 t/h<br/>bulk weight of 100 kg/cbm approx. 9 up to 15 t/h<br/>bale weight 400 up to 550 kg<br/>sps controller (manuf., type) siemens s5<br/>machine weight baler approx. 20 to<br/> <br/>comments: in 2015, the press was extensively overhauled and various parts, including the main hydraulic cylinder, were replaced. the machine is in good condition and immediately ready for operation. the video about the test of the machine can be found on our website. inspections under power in operation, without material, are possible after agreement. we will not assume liability for the given technical data and possible errors. MANUFACTURER BAUER
TYP 500
YEAR OF CONSTRUCTION 1994
HOURS OF OPERATION 26,663 HOURS
PRESS POWER MAIN PRESS 50 TONS
PRESS POWER FREE STAMPER 24 TONS
FEED CHANNEL 1,800 X 1,020 MM (L X W)
CAPACITY PER CYCLE TIME 2 CBM
THEORETIC THROUGHPUT RATE 350 CBM/H
THROUGHPUT RATE UNDER OPERATION 180 CBM/H
BALE SIZE 1,100 X 680 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 2 X 22 KW
TYING SYSTEM 4-FOLD VERTICAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 3 UP TO 5 T/H
BULK WEIGHT OF 50 KG/CBM APPROX. 4 UP TO 8 T/H
BULK WEIGHT OF 100 KG/CBM APPROX. 9 UP TO 15 T/H
BALE WEIGHT 400 UP TO 550 KG
SPS CONTROLLER (MANUF., TYPE) SIEMENS S5
MACHINE WEIGHT BALER APPROX. 20 TO

COMMENTS: IN 2015, THE PRESS WAS EXTENSIVELY OVERHAULED AND VARIOUS PARTS, INCLUDING THE MAIN HYDRAULIC CYLINDER, WERE REPLACED. THE MACHINE IS IN GOOD CONDITION AND IMMEDIATELY READY FOR OPERATION. THE VIDEO ABOUT THE TEST OF THE MACHINE CAN BE FOUND ON OUR WEBSITE. INSPECTIONS UNDER POWER IN OPERATION, WITHOUT MATERIAL, ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 399 €
Ubicación: Land-1 x pallet racking dexion vintage cameras

data:
-h: approx. 450 cm
-t: approx. 110 cm
-l: approx. 5.6 yds

-offer
-used - good condition dexion
-stand in bright zinc-plated
-trusses 280 cm
-trusses in bright zinc-plated

shelf consists of:
-3 x stand 450 x 110 cm
-traverse 8 x 280 cm
-results 18 pallet places.

price:
â?¬399 net
â?¬474,81 gross
you will receive an invoice with expelled vat

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible. 1 X PALLET RACKING DEXION VINTAGE CAMERAS DATA: -H: APPROX. 450 CM -T: APPROX. 110 CM -L: APPROX. 5.6 YDS -OFFER -USED - GOOD CONDITION DEXION -STAND IN BRIGHT ZINC-PLATED -TRUSSES 280 CM -TRUSSES IN BRIGHT ZINC-PLATED SHELF CONSISTS OF: -3 X STAND 450 X 110 CM -TRAVERSE 8 X 280 CM -RESULTS 18 PALLET PLACES. PRICE: &ACIRC;?&NOT;399 NET &ACIRC;?&NOT;474,81 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-manufacturer presona<br/>typ lp 80 vh2<br/>year of construction 2002<br/>working hours 62,540 h<br/>press power main press 78,5 tons<br/>specific press capacity 97 n/cm² <br/>press power of pre-press 28 tons<br/>volume of pressing chamber 2,7 m³<br/>feed channel1,500 x 1,100 mm<br/>theoretic  throughput rate 1,200 m³/h<br/>throughput rate under  operating conditions 560 m³/h<br/>bale size 750 x 1,100 mm<br/>driving motor 2 x 45 kw<br/>tying system 5 fold vertical, full automatic<br/>throughput rate approx. 13 up to 30 tons/h, depends on material<br/>bale weight 450 up to 600 kg, depends on material and bale length<br/>volume hydraulic oil tank 1,500 l<br/>baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h)<br/>transport dimensions only baler 10,985 x 2,300 x 3,400 mm (l x w x h)<br/>machine weight baler approx. 23 tons<br/><br/>comments:<br/>inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER PRESONA
TYP LP 80 VH2
YEAR OF CONSTRUCTION 2002
WORKING HOURS 62,540 H
PRESS POWER MAIN PRESS 78,5 TONS
SPECIFIC PRESS CAPACITY 97 N/CM²
PRESS POWER OF PRE-PRESS 28 TONS
VOLUME OF PRESSING CHAMBER 2,7 M³
FEED CHANNEL1,500 X 1,100 MM
THEORETIC THROUGHPUT RATE 1,200 M³/H
THROUGHPUT RATE UNDER OPERATING CONDITIONS 560 M³/H
BALE SIZE 750 X 1,100 MM
DRIVING MOTOR 2 X 45 KW
TYING SYSTEM 5 FOLD VERTICAL, FULL AUTOMATIC
THROUGHPUT RATE APPROX. 13 UP TO 30 TONS/H, DEPENDS ON MATERIAL
BALE WEIGHT 450 UP TO 600 KG, DEPENDS ON MATERIAL AND BALE LENGTH
VOLUME HYDRAULIC OIL TANK 1,500 L
BALER DIMENSIONS BUILT UP WITH HOPPER 10,985 X 3,750 X 4,310 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 10,985 X 2,300 X 3,400 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 23 TONS

COMMENTS:
INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 440 €
Ubicación: Land-1 x pallet rack data:
-h: approx. 200 cm
-t: approx. 110 cm
-l: 840 cm

-offer
-used in a technically perfect condition.
-stand blue
-traverses 270 cm
-trusses in orange

shelf consists of:
-4 x stand approx. 200 x 110 cm
-traverse 12 x 270 cm
-incl. locking pins
-results in 27 pallet places.

price:
â?¬440 net
â?¬523,60 gross
you will receive an invoice with expelled vat

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible.      1 X PALLET RACK DATA: -H: APPROX. 200 CM -T: APPROX. 110 CM -L: 840 CM -OFFER -USED IN A TECHNICALLY PERFECT CONDITION. -STAND BLUE -TRAVERSES 270 CM -TRUSSES IN ORANGE SHELF CONSISTS OF: -4 X STAND APPROX. 200 X 110 CM -TRAVERSE 12 X 270 CM -INCL. LOCKING PINS -RESULTS IN 27 PALLET PLACES. PRICE: &ACIRC;?&NOT;440 NET &ACIRC;?&NOT;523,60 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-manufacturer macpresse<br/>typ 111/1<br/>year of construction 2008<br/>press power main press 170 tons<br/>specific press capacity 14 kg/cm²<br/>feed channel 1,800 x 1,020 mm<br/>filling volume 2,5 cm³<br/>theoretic  throughput rate 750 m³/h<br/>bale size 1,100 x 1,100 mm<br/>driving motor 2 x 75 kw<br/>tying system 5 fold horizontal, full automatic<br/>throughput rate at a approx. 30 up to 35 tons/h, depends on material<br/>volume hydraulic oil tank 3,000 l<br/>baler dimensions built up with hopper 11,460 x 5,945 x 4,055 mm (l x w x h)<br/>machine weight baler approx. 40 tons<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER MACPRESSE
TYP 111/1
YEAR OF CONSTRUCTION 2008
PRESS POWER MAIN PRESS 170 TONS
SPECIFIC PRESS CAPACITY 14 KG/CM²
FEED CHANNEL 1,800 X 1,020 MM
FILLING VOLUME 2,5 CM³
THEORETIC THROUGHPUT RATE 750 M³/H
BALE SIZE 1,100 X 1,100 MM
DRIVING MOTOR 2 X 75 KW
TYING SYSTEM 5 FOLD HORIZONTAL, FULL AUTOMATIC
THROUGHPUT RATE AT A APPROX. 30 UP TO 35 TONS/H, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 3,000 L
BALER DIMENSIONS BUILT UP WITH HOPPER 11,460 X 5,945 X 4,055 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 40 TONS

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 4.730 €
Ubicación: Land-100 of m shelf system

data:
-h: approx. 200 cm
-t: approx. 110 cm
-l: approximately 100.8 m

-used in a technically perfect condition.
-immediately from stock
-800 kg per pallet space
-stand blue
-traverses 270 cm
-trusses in orange

shelf consists of:
-37 x stand approx. 200 cm
-traverse 144 x 270 cm
-results in 324 pallet places.

price:
â?¬4730 net
â?¬5628,70 gross
you will receive an invoice with expelled vat

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible.      100 OF M SHELF SYSTEM DATA: -H: APPROX. 200 CM -T: APPROX. 110 CM -L: APPROXIMATELY 100.8 M -USED IN A TECHNICALLY PERFECT CONDITION. -IMMEDIATELY FROM STOCK -800 KG PER PALLET SPACE -STAND BLUE -TRAVERSES 270 CM -TRUSSES IN ORANGE SHELF CONSISTS OF: -37 X STAND APPROX. 200 CM -TRAVERSE 144 X 270 CM -RESULTS IN 324 PALLET PLACES. PRICE: &ACIRC;?&NOT;4730 NET &ACIRC;?&NOT;5628,70 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Precio: 79.500 €
Ubicación: Land-manufacturer bollegraaf<br/>type hbc 100<br/>year of construction 1990<br/>hours of operation 24,319 hours<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 3,15 m³<br/>theoretic cycle time 22 sec.<br/>bale size 750 x 1,100 mm, length variable<br/>driving motor 2 x 30 kw<br/>tying system 5 fold vertical, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm up to 12 tons/h<br/>bulk weight of 50 kg/cbm up to 25 tons/h<br/>bulk weight of 100 kg/cbm up to 47 tons/h<br/>bale weight 550 up to 850 kg, depends on material<br/>volume hydraulic oil tank 1,200 l<br/>transport dimensions only baler 11,750 x 2,250 x 3,150 mm (l x w x h)<br/>machine weight baler approx. 30 tons<br/><br/>comments:<br/>the machine has been overhauled, is in good condition and immediately available. MANUFACTURER BOLLEGRAAF
TYPE HBC 100
YEAR OF CONSTRUCTION 1990
HOURS OF OPERATION 24,319 HOURS
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 3,15 M³
THEORETIC CYCLE TIME 22 SEC.
BALE SIZE 750 X 1,100 MM, LENGTH VARIABLE
DRIVING MOTOR 2 X 30 KW
TYING SYSTEM 5 FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM UP TO 12 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 25 TONS/H
BULK WEIGHT OF 100 KG/CBM UP TO 47 TONS/H
BALE WEIGHT 550 UP TO 850 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 1,200 L
TRANSPORT DIMENSIONS ONLY BALER 11,750 X 2,250 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 30 TONS

COMMENTS:
THE MACHINE HAS BEEN OVERHAULED, IS IN GOOD CONDITION AND IMMEDIATELY AVAILABLE.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 4.880 €
Ubicación: Land-pallet racks immediately from stock

data:
-h: 462 cm
-t: approx. 110 cm
-l: approx. 84 yds

-used in a technically perfect condition.
-800 kg per pallet space
-stand blue
-traverses 270 cm
-trusses in orange

shelf consists of:
-31 x stand 462 cm
-30 x fields a. 270 cm
-traverse 120 x 270 cm
-produces 270 pallet places.

price:
â?¬4880 net
â?¬5807,20 gross
you will receive an invoice with expelled vat

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.       PALLET RACKS IMMEDIATELY FROM STOCK DATA: -H: 462 CM -T: APPROX. 110 CM -L: APPROX. 84 YDS -USED IN A TECHNICALLY PERFECT CONDITION. -800 KG PER PALLET SPACE -STAND BLUE -TRAVERSES 270 CM -TRUSSES IN ORANGE SHELF CONSISTS OF: -31 X STAND 462 CM -30 X FIELDS A. 270 CM -TRAVERSE 120 X 270 CM -PRODUCES 270 PALLET PLACES. PRICE: &ACIRC;?&NOT;4880 NET &ACIRC;?&NOT;5807,20 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>typ hbc 100 k<br/>year of construction 2000<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm<br/>capacity per cycle time 3,15 m³<br/>theoretic cycle time 19 sec.<br/>bale size 1,100 x 720 mm<br/>driving motor 75 kw<br/>tying system 5 fold vertical, 3 fold horizontal, fully automated<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx.. 16 tons/h<br/>bulk weight of 50 kg/cbm  approx.. 25 tons/h<br/>bulk weight of 100 kg/cbm  approx.. 47 tons/h<br/>bale weight 550 up to 880 kg, depends on material and bale lenght<br/>sps controller (manuf., type)  telemecanique tsx micro<br/>operating panel (manuf., type)  schneider magelis touch<br/>baler dimensions built up with hopper 11,750 x 2,250 x 6,690 mm (l x w x h)<br/>transport dimensions only baler 11.750 x 2.250 x 3.150 mm (l x w x h)<br/>machine weight baler approx. 35 tons<br/><br/>comments:<br/>inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYP HBC 100 K
YEAR OF CONSTRUCTION 2000
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM
CAPACITY PER CYCLE TIME 3,15 M³
THEORETIC CYCLE TIME 19 SEC.
BALE SIZE 1,100 X 720 MM
DRIVING MOTOR 75 KW
TYING SYSTEM 5 FOLD VERTICAL, 3 FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX.. 16 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX.. 25 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX.. 47 TONS/H
BALE WEIGHT 550 UP TO 880 KG, DEPENDS ON MATERIAL AND BALE LENGHT
SPS CONTROLLER (MANUF., TYPE) TELEMECANIQUE TSX MICRO
OPERATING PANEL (MANUF., TYPE) SCHNEIDER MAGELIS TOUCH
BALER DIMENSIONS BUILT UP WITH HOPPER 11,750 X 2,250 X 6,690 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 11.750 X 2.250 X 3.150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 35 TONS

COMMENTS:
INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 310 €
Ubicación: Land-1 x pallet rack used

data:
-h: approx. 200 cm
-t: approx. 110 cm
-l: 560 cm

-offer
-used in a technically perfect condition.
-stand blue
-traverses 270 cm
-trusses in orange

shelf consists of:
-3 x stand approx. 200 x 110 cm
-traverse 8 x 270 cm
-incl. locking pins
-results 18 pallet places.

price:
â?¬310 net
â?¬368,90 gross
you will receive an invoice with expelled vat

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible.     1 X PALLET RACK USED DATA: -H: APPROX. 200 CM -T: APPROX. 110 CM -L: 560 CM -OFFER -USED IN A TECHNICALLY PERFECT CONDITION. -STAND BLUE -TRAVERSES 270 CM -TRUSSES IN ORANGE SHELF CONSISTS OF: -3 X STAND APPROX. 200 X 110 CM -TRAVERSE 8 X 270 CM -INCL. LOCKING PINS -RESULTS 18 PALLET PLACES. PRICE: &ACIRC;?&NOT;310 NET &ACIRC;?&NOT;368,90 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-manufacturer paal<br/>typ konti 325 e<br/>year of construction 2003<br/>press power main press 94 tons<br/>feed channel 1,750 x 1,020 mm<br/>filling volume 2,15 m³<br/>theoretic throughput rate 660 m³/h<br/>throughput rate under operating conditions 340 m³/h<br/>bale size 1,100 x 750 mm, length variable <br/>driving motor 75 kw<br/>connected load 96 kw<br/>rated current 180 a<br/>tying system 4 fold vertical, full automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx. 11,5 tons/h<br/>bulk weight of 50 kg/cbm approx. 20 tons/h<br/>bulk weight of 100 kg/cbm approx. 32 tons/h<br/>bale weight 525 up to 800 kg, depends on bale length and material<br/>volume hydraulic oil 2,100 l<br/>machine dimensions with feed channel 12,352 x 2,340 x 5,145 mm l x w x h)<br/>transport dimensions only baler 12,352 x 2,340 x 2,800 mm (l x w x h)<br/>machine weight baler approx. 26 tons<br/><br/>comments:<br/>the press is sold without conveyor belt.<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER PAAL
TYP KONTI 325 E
YEAR OF CONSTRUCTION 2003
PRESS POWER MAIN PRESS 94 TONS
FEED CHANNEL 1,750 X 1,020 MM
FILLING VOLUME 2,15 M³
THEORETIC THROUGHPUT RATE 660 M³/H
THROUGHPUT RATE UNDER OPERATING CONDITIONS 340 M³/H
BALE SIZE 1,100 X 750 MM, LENGTH VARIABLE
DRIVING MOTOR 75 KW
CONNECTED LOAD 96 KW
RATED CURRENT 180 A
TYING SYSTEM 4 FOLD VERTICAL, FULL AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 11,5 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 20 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 32 TONS/H
BALE WEIGHT 525 UP TO 800 KG, DEPENDS ON BALE LENGTH AND MATERIAL
VOLUME HYDRAULIC OIL 2,100 L
MACHINE DIMENSIONS WITH FEED CHANNEL 12,352 X 2,340 X 5,145 MM L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 12,352 X 2,340 X 2,800 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 26 TONS

COMMENTS:
THE PRESS IS SOLD WITHOUT CONVEYOR BELT.
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more OMM types: