1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-max. rotational speed: 1640/min, max. kinetic energy: 175.808n, wall thickness: 8mm, material: stainless steel 1.4571, was completely overhauled in 2007.  MAX. ROTATIONAL SPEED: 1640/MIN, MAX. KINETIC ENERGY: 175.808N, WALL THICKNESS: 8MM, MATERIAL: STAINLESS STEEL 1.4571, WAS COMPLETELY OVERHAULED IN 2007.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 76.750 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-rotational speed: 6500/min, max. density: 1.05kg/dm³, product temperature: 5-90°c, length: 1500mm, width: 800mm, height: 1700mm, weight: 730kg.  ROTATIONAL SPEED: 6500/MIN, MAX. DENSITY: 1.05KG/DM³, PRODUCT TEMPERATURE: 5-90°C, LENGTH: 1500MM, WIDTH: 800MM, HEIGHT: 1700MM, WEIGHT: 730KG.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-turning length: 650 mm<br/>turning diameter over bed: 330 mm<br/>centre height: 165 mm<br/>turning speed range: 45 - 2.800 u/min<br/>spindle bore: 40,0 mm<br/>dia. of quill: 50,0 mm<br/>quill stroke: 110 mm<br/>taper: 3 mk<br/>bed width: 240 mm<br/>max. workpiece weight: 160 kg<br/>weight of the machine ca.: 1.150 kg.<br/>range l-w-h: 1.832 x 880 x 1.290 mm<br/><br/><br/><br/><br/> TURNING LENGTH: 650 MM
TURNING DIAMETER OVER BED: 330 MM
CENTRE HEIGHT: 165 MM
TURNING SPEED RANGE: 45 - 2.800 U/MIN
SPINDLE BORE: 40,0 MM
DIA. OF QUILL: 50,0 MM
QUILL STROKE: 110 MM
TAPER: 3 MK
BED WIDTH: 240 MM
MAX. WORKPIECE WEIGHT: 160 KG
WEIGHT OF THE MACHINE CA.: 1.150 KG.
RANGE L-W-H: 1.832 X 880 X 1.290 MM




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-counter (m): 2658185  	
equipment / additional information:
printer specifications
print speed. a4: up to 60 pages / minute
print speed. a3: up to 34 pages / minute
print resolution: 1 '200 x 1' 200 dpi x 8 bit; max: 1 '200 x 3'600 dpi
grayscale: 256 semitones
scanner specifications
scangeschw. a4: up to 40 originals / minute
scangeschw. a3: up to 22 originals / minute
scan resolution: 600 x 600 dpi
scan mode: twain scan; scan-to-hdd; scan to ftp scan to smb; scan to e-mail
scan formats: tiff (single and multi-pages); pdf
system specifications
paper weight: 64-256 g / m2 up to 300 g / m2
duplex unit: non-stack type; 64-300 gsm
paper size: a5-a3 + (330 x 487 mm)
printable area: 321 x 480 mm
paper feeder: maximum: 7,500 sheets; main part: up to 1'500 sheets
paper output: maximum: 13'600 sheets
copy specifications
copy speed. a4: up to 60 copies / minute
copy speed. a3: up to 34 copies / minute
grayscale: 256 semitones

  COUNTER (M): 2658185 EQUIPMENT / ADDITIONAL INFORMATION: PRINTER SPECIFICATIONS PRINT SPEED. A4: UP TO 60 PAGES / MINUTE PRINT SPEED. A3: UP TO 34 PAGES / MINUTE PRINT RESOLUTION: 1 '200 X 1' 200 DPI X 8 BIT; MAX: 1 '200 X 3'600 DPI GRAYSCALE: 256 SEMITONES SCANNER SPECIFICATIONS SCANGESCHW. A4: UP TO 40 ORIGINALS / MINUTE SCANGESCHW. A3: UP TO 22 ORIGINALS / MINUTE SCAN RESOLUTION: 600 X 600 DPI SCAN MODE: TWAIN SCAN; SCAN-TO-HDD; SCAN TO FTP SCAN TO SMB; SCAN TO E-MAIL SCAN FORMATS: TIFF (SINGLE AND MULTI-PAGES); PDF SYSTEM SPECIFICATIONS PAPER WEIGHT: 64-256 G / M2 UP TO 300 G / M2 DUPLEX UNIT: NON-STACK TYPE; 64-300 GSM PAPER SIZE: A5-A3 + (330 X 487 MM) PRINTABLE AREA: 321 X 480 MM PAPER FEEDER: MAXIMUM: 7,500 SHEETS; MAIN PART: UP TO 1'500 SHEETS PAPER OUTPUT: MAXIMUM: 13'600 SHEETS COPY SPECIFICATIONS COPY SPEED. A4: UP TO 60 COPIES / MINUTE COPY SPEED. A3: UP TO 34 COPIES / MINUTE GRAYSCALE: 256 SEMITONES
Vendedor: MJS-LINE GmbH
Año de construcción: usado
Ubicación: Land-turning length: 2000 mm<br/>turning diameter: 910 mm<br/>swing diameter over bed slide: 710 mm<br/>turning dia. in gap: 1.210 mm<br/>turning speed range: 2 - 500 u/min<br/>power requirement: 35,0 kw<br/>spindle bore:  mm<br/>weight of the machine ca.: 8.000 ca. kg.<br/>range l-w-h:  m<br/><br/><br/><br/><br/> TURNING LENGTH: 2000 MM
TURNING DIAMETER: 910 MM
SWING DIAMETER OVER BED SLIDE: 710 MM
TURNING DIA. IN GAP: 1.210 MM
TURNING SPEED RANGE: 2 - 500 U/MIN
POWER REQUIREMENT: 35,0 KW
SPINDLE BORE: MM
WEIGHT OF THE MACHINE CA.: 8.000 CA. KG.
RANGE L-W-H: M




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-4 floors 80 x 60 cm sheets
with provers (16 pads 60 x 40 cm)
stainless steel panel digital control mobile on castors technical data: 400 / 230v / 3 / n / pe 50 hz / 18.9 kw dimensions: height: 210 cm width: 110 cm depth: 120 cm  4 FLOORS 80 X 60 CM SHEETS WITH PROVERS (16 PADS 60 X 40 CM) STAINLESS STEEL PANEL DIGITAL CONTROL MOBILE ON CASTORS TECHNICAL DATA: 400 / 230V / 3 / N / PE 50 HZ / 18.9 KW DIMENSIONS: HEIGHT: 210 CM WIDTH: 110 CM DEPTH: 120 CM
Vendedor: Güzel Taceddin
Año de construcción: usado
Ubicación: Land-gildemeister ctx 200
 1995.
91500 hours
-clamping tongs recording 173e
-tailstock
repairs
-hollow clamping cylinder new 10/2017
-main spindle bearings new 10/2018
-currently strong noise, cause unknown
-machine and is conditionally ready to use
 GILDEMEISTER CTX 200 1995. 91500 HOURS -CLAMPING TONGS RECORDING 173E -TAILSTOCK REPAIRS -HOLLOW CLAMPING CYLINDER NEW 10/2017 -MAIN SPINDLE BEARINGS NEW 10/2018 -CURRENTLY STRONG NOISE, CAUSE UNKNOWN -MACHINE AND IS CONDITIONALLY READY TO USE
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-sizes from 5 kg dough/7 ltr. until 60 kg/75 ltr.\r\n1 speed (optional with 2 speeds), white painted steel body, bowl + spiral + dough deflector + safety rack made of stainless steel\r\nbowl is counterrotating (optional with removable bowl)\r\nchain drive, self-oiling step-down-gear SIZES FROM 5 KG DOUGH/7 LTR. UNTIL 60 KG/75 LTR.\R\N1 SPEED (OPTIONAL WITH 2 SPEEDS), WHITE PAINTED STEEL BODY, BOWL + SPIRAL + DOUGH DEFLECTOR + SAFETY RACK MADE OF STAINLESS STEEL\R\NBOWL IS COUNTERROTATING (OPTIONAL WITH REMOVABLE BOWL)\R\NCHAIN DRIVE, SELF-OILING STEP-DOWN-GEAR
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 8.500 €
Ubicación: Land-cnc lathe
mazak quick turn 10n
with complete electrical equipment, 380v three-phase.

at the time new price: approx. 190.000,-dm (approx. â?¬100.000)

control: mazatrol t-2 cam
chip conveyor
turning diameter 270 mm
circulating bed 510 mm
swing over bed slide of max 310 mm
number of controlled axes: 3
travel: x-axis 170 mm, z axis 1035 mm
drum revolver: 8 stations
sleeve diameter 20 x 20 mm, diameter of 50 mm
programmable tailstock shift
power of main motor: 15 kw
machine power consumption: 34.7 kva
space requirements: 3,300 x 1,763 mm
machine weight: 4,500 kg

accessories such as tool holders, 3 - jaw chuck, etc is available.

the documentation is complete.

the tool measuring system (tool eye) and the screen were replaced two years ago, so as good as new.

the machine is a very good condition. there are no deficiencies.

hours of operation are very small (see image) and also therefore the machine is in a mint condition.

the machine is no longer required and is taken to the 20.12.2018 of the electricity.

here a short video in the dry run, to show that the machine is fully operational:

video: abcs://youtu.be/o0a82n_9wfo

location of the machine: 76661 philippsburg

the machine can be visited at any time.

we love to hear from you. CNC LATHE MAZAK QUICK TURN 10N WITH COMPLETE ELECTRICAL EQUIPMENT, 380V THREE-PHASE. AT THE TIME NEW PRICE: APPROX. 190.000,-DM (APPROX. &ACIRC;?&NOT;100.000) CONTROL: MAZATROL T-2 CAM CHIP CONVEYOR TURNING DIAMETER 270 MM CIRCULATING BED 510 MM SWING OVER BED SLIDE OF MAX 310 MM NUMBER OF CONTROLLED AXES: 3 TRAVEL: X-AXIS 170 MM, Z AXIS 1035 MM DRUM REVOLVER: 8 STATIONS SLEEVE DIAMETER 20 X 20 MM, DIAMETER OF 50 MM PROGRAMMABLE TAILSTOCK SHIFT POWER OF MAIN MOTOR: 15 KW MACHINE POWER CONSUMPTION: 34.7 KVA SPACE REQUIREMENTS: 3,300 X 1,763 MM MACHINE WEIGHT: 4,500 KG ACCESSORIES SUCH AS TOOL HOLDERS, 3 - JAW CHUCK, ETC IS AVAILABLE. THE DOCUMENTATION IS COMPLETE. THE TOOL MEASURING SYSTEM (TOOL EYE) AND THE SCREEN WERE REPLACED TWO YEARS AGO, SO AS GOOD AS NEW. THE MACHINE IS A VERY GOOD CONDITION. THERE ARE NO DEFICIENCIES. HOURS OF OPERATION ARE VERY SMALL (SEE IMAGE) AND ALSO THEREFORE THE MACHINE IS IN A MINT CONDITION. THE MACHINE IS NO LONGER REQUIRED AND IS TAKEN TO THE 20.12.2018 OF THE ELECTRICITY. HERE A SHORT VIDEO IN THE DRY RUN, TO SHOW THAT THE MACHINE IS FULLY OPERATIONAL: VIDEO: ABCS://YOUTU.BE/O0A82N_9WFO LOCATION OF THE MACHINE: 76661 PHILIPPSBURG THE MACHINE CAN BE VISITED AT ANY TIME. WE LOVE TO HEAR FROM YOU.
Vendedor: W&T EFRA
Año de construcción: usado
Ubicación: Land-sawing-, drilling and dowel inserting machine\r\nbrand: koch\r\ntype: centronic\r\nyear: 2000\r\n\r\ntechnical data:\r\n\r\nworkpiece dimensions:\r\nlength: 188-1800mm\r\nwidth:\r\n- 20-150mm at 2 workpieces each field\r\n- 100mm at 2 workpieces each field, at 45 °\r\n- 300mm at 1 workpiece each field\r\nthickness: 10-40mm\r\n\r\nstandard equipment:\r\n- 1 saw unit\r\n2,2 kw, 2800 rpm., saw blade clamp with quick change system, braking device for saw motor\r\nscoring saw 1,5 kw, 2800 u/min\r\n\r\n- 1 horizontal drilling unit\r\n2 kw, driller rotation speed 2800 rpm\r\nwith dowel hole blowing\r\n1 piece dowel hole driller\r\nhorizontal drilling distance over supporting table (z): max. 50mm\r\n\r\n- glue application- and dowel inserting station\r\n1 single dowel tool\r\ndowel-Ø 8mm\r\ndowel length 30mm\r\ndowel overhang 7-14mm\r\nadjusted on 14mm\r\n\r\n- 1 vibrational conveyor\r\n- electr. glue monitoring elc\r\n- glue pump 1:1\r\n- digital display for drilling depth and dowel overhang\r\n- workpiece supporting table\r\nseperate swivable 25° to the bottom\r\n2 fences 45°-90° turnable, back stops wit led-display\r\n- 2 work fields\r\neach workfield can be fed with 2 workpieces\r\n- central lubrification\r\n- telephone modem for remote diagnosis\r\n- foot switch for working cycle stop\r\n\r\nkoch numeric with 1 nc-axis (x)\r\n\r\ncompressed air supply: 7 bar\r\nsuction air speed: approx. 30m/sec\r\n\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding.\r\n SAWING-, DRILLING AND DOWEL INSERTING MACHINE\R\NBRAND: KOCH\R\NTYPE: CENTRONIC\R\NYEAR: 2000\R\N\R\NTECHNICAL DATA:\R\N\R\NWORKPIECE DIMENSIONS:\R\NLENGTH: 188-1800MM\R\NWIDTH:\R\N- 20-150MM AT 2 WORKPIECES EACH FIELD\R\N- 100MM AT 2 WORKPIECES EACH FIELD, AT 45 °\R\N- 300MM AT 1 WORKPIECE EACH FIELD\R\NTHICKNESS: 10-40MM\R\N\R\NSTANDARD EQUIPMENT:\R\N- 1 SAW UNIT\R\N2,2 KW, 2800 RPM., SAW BLADE CLAMP WITH QUICK CHANGE SYSTEM, BRAKING DEVICE FOR SAW MOTOR\R\NSCORING SAW 1,5 KW, 2800 U/MIN\R\N\R\N- 1 HORIZONTAL DRILLING UNIT\R\N2 KW, DRILLER ROTATION SPEED 2800 RPM\R\NWITH DOWEL HOLE BLOWING\R\N1 PIECE DOWEL HOLE DRILLER\R\NHORIZONTAL DRILLING DISTANCE OVER SUPPORTING TABLE (Z): MAX. 50MM\R\N\R\N- GLUE APPLICATION- AND DOWEL INSERTING STATION\R\N1 SINGLE DOWEL TOOL\R\NDOWEL-Ø 8MM\R\NDOWEL LENGTH 30MM\R\NDOWEL OVERHANG 7-14MM\R\NADJUSTED ON 14MM\R\N\R\N- 1 VIBRATIONAL CONVEYOR\R\N- ELECTR. GLUE MONITORING ELC\R\N- GLUE PUMP 1:1\R\N- DIGITAL DISPLAY FOR DRILLING DEPTH AND DOWEL OVERHANG\R\N- WORKPIECE SUPPORTING TABLE\R\NSEPERATE SWIVABLE 25° TO THE BOTTOM\R\N2 FENCES 45°-90° TURNABLE, BACK STOPS WIT LED-DISPLAY\R\N- 2 WORK FIELDS\R\NEACH WORKFIELD CAN BE FED WITH 2 WORKPIECES\R\N- CENTRAL LUBRIFICATION\R\N- TELEPHONE MODEM FOR REMOTE DIAGNOSIS\R\N- FOOT SWITCH FOR WORKING CYCLE STOP\R\N\R\NKOCH NUMERIC WITH 1 NC-AXIS (X)\R\N\R\NCOMPRESSED AIR SUPPLY: 7 BAR\R\NSUCTION AIR SPEED: APPROX. 30M/SEC\R\N\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-4 floors 80 x 60 cm sheets
proofer (16 pads 60 x 40 cm) stainless steel panel digital control mobile on castors technical data: 400 / 230v / 3/n/pe 50 hz / 18.9 kw dimensions: height: 210 cm width: 110 cm depth: 120 cm  4 FLOORS 80 X 60 CM SHEETS PROOFER (16 PADS 60 X 40 CM) STAINLESS STEEL PANEL DIGITAL CONTROL MOBILE ON CASTORS TECHNICAL DATA: 400 / 230V / 3/N/PE 50 HZ / 18.9 KW DIMENSIONS: HEIGHT: 210 CM WIDTH: 110 CM DEPTH: 120 CM
Vendedor: Güzel Taceddin
Año de construcción: usado
Ubicación: Land-manufacturer presona<br/>typ lp 80 vh2<br/>year of construction 2002<br/>working hours 62,540 h<br/>press power main press 78,5 tons<br/>specific press capacity 97 n/cm² <br/>press power of pre-press 28 tons<br/>volume of pressing chamber 2,7 m³<br/>feed channel1,500 x 1,100 mm<br/>theoretic  throughput rate 1,200 m³/h<br/>throughput rate under  operating conditions 560 m³/h<br/>bale size 750 x 1,100 mm<br/>driving motor 2 x 45 kw<br/>tying system 5 fold vertical, full automatic<br/>throughput rate approx. 13 up to 30 tons/h, depends on material<br/>bale weight 450 up to 600 kg, depends on material and bale length<br/>volume hydraulic oil tank 1,500 l<br/>baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h)<br/>transport dimensions only baler 10,985 x 2,300 x 3,400 mm (l x w x h)<br/>machine weight baler approx. 23 tons<br/><br/>comments:<br/>inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER PRESONA
TYP LP 80 VH2
YEAR OF CONSTRUCTION 2002
WORKING HOURS 62,540 H
PRESS POWER MAIN PRESS 78,5 TONS
SPECIFIC PRESS CAPACITY 97 N/CM²
PRESS POWER OF PRE-PRESS 28 TONS
VOLUME OF PRESSING CHAMBER 2,7 M³
FEED CHANNEL1,500 X 1,100 MM
THEORETIC THROUGHPUT RATE 1,200 M³/H
THROUGHPUT RATE UNDER OPERATING CONDITIONS 560 M³/H
BALE SIZE 750 X 1,100 MM
DRIVING MOTOR 2 X 45 KW
TYING SYSTEM 5 FOLD VERTICAL, FULL AUTOMATIC
THROUGHPUT RATE APPROX. 13 UP TO 30 TONS/H, DEPENDS ON MATERIAL
BALE WEIGHT 450 UP TO 600 KG, DEPENDS ON MATERIAL AND BALE LENGTH
VOLUME HYDRAULIC OIL TANK 1,500 L
BALER DIMENSIONS BUILT UP WITH HOPPER 10,985 X 3,750 X 4,310 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 10,985 X 2,300 X 3,400 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 23 TONS

COMMENTS:
INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-year 2014
table device
circular knife machine
cutting cutting width adjustable from 5 to 25 mm without oil
to the cutting breads until 30 cm stainless steel panel 380v / 50 hz YEAR 2014 TABLE DEVICE CIRCULAR KNIFE MACHINE CUTTING CUTTING WIDTH ADJUSTABLE FROM 5 TO 25 MM WITHOUT OIL TO THE CUTTING BREADS UNTIL 30 CM STAINLESS STEEL PANEL 380V / 50 HZ
Vendedor: Güzel Taceddin
Año de construcción: usado
Ubicación: Land-manufacturer avermann<br/>typ avos bp 1410 s 37-70<br/>year of construction 2003<br/>working hours 17,532 h<br/>press power main press 70 tons<br/>specific press capacity 90,9 n/cm²<br/>feed channel 1.400 x 1.000 mm (l x w)<br/>theoretic cycle time 10 sec.<br/>throughput rate   360 cbm/h<br/>bale size 1.100 x 700 mm (w x h) length adjustable<br/>driving motor 37 kw<br/>tying system 4-fold vertical, fully automated<br/>throughput rate max. approx. 15 tons/h<br/>bale weight until 550 kg<br/>baler dimensions built up with hopper approx. 8,390 x 2,355 x 3,780  mm (l x w x h)<br/>transport dimensions only baler approx. 8,390 x 2,355 x 2,800 mm (l x w x h)<br/>machine weight baler approx. 15 tons<br/> <br/>comments: the machine was overhauled and tested with material. <br/>as an optional extra, the press was equipped with a special ram, which only opens the needle slots hydraulically during the binding phase. with this feature the press is able to press difficult materials and reliably tie up.<br/><br/>inspections are possible after agreement. we will not assume liability for the given technical data and possible errors. MANUFACTURER AVERMANN
TYP AVOS BP 1410 S 37-70
YEAR OF CONSTRUCTION 2003
WORKING HOURS 17,532 H
PRESS POWER MAIN PRESS 70 TONS
SPECIFIC PRESS CAPACITY 90,9 N/CM²
FEED CHANNEL 1.400 X 1.000 MM (L X W)
THEORETIC CYCLE TIME 10 SEC.
THROUGHPUT RATE 360 CBM/H
BALE SIZE 1.100 X 700 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 37 KW
TYING SYSTEM 4-FOLD VERTICAL, FULLY AUTOMATED
THROUGHPUT RATE MAX. APPROX. 15 TONS/H
BALE WEIGHT UNTIL 550 KG
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX. 8,390 X 2,355 X 3,780 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX. 8,390 X 2,355 X 2,800 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 15 TONS

COMMENTS: THE MACHINE WAS OVERHAULED AND TESTED WITH MATERIAL.
AS AN OPTIONAL EXTRA, THE PRESS WAS EQUIPPED WITH A SPECIAL RAM, WHICH ONLY OPENS THE NEEDLE SLOTS HYDRAULICALLY DURING THE BINDING PHASE. WITH THIS FEATURE THE PRESS IS ABLE TO PRESS DIFFICULT MATERIALS AND RELIABLY TIE UP.

INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 345.000 PLN
Ubicación: Land-vertical packing machine hsv 101 s flexible
along with the conveyor can be compensated with dildo decentralized drive and flexible control of the machine is welding torch system
the device is completely decentralised structure drive
a wide range of packaging and bulk products easy control and programming
a wide range of optional equipment easy replacement of the tube with flange by means of clamps quick change clamping units effectively set the cut as a sign of low energy consumption
100 memory settings automatic centring film
self diagnostics
a wide range of moulding packaging system easy to connect film
materials combined hot such as pp, paper, pe, etc. 
thermoplastic materials such as pe foil, etc. 
the efficiency of the machine depends on the product to be packaged, packaging material, packaging size and type of measuring device the year of manufacture: 2000

14 head nawa?arka-weight multipond mp 1401-c
 
universal high-precision dispenser multi-head considerations all kinds of bulk products and granulates, for example, such as pasta, candy, nuts, seeds, spices, coffee, cakes, chocolate, frozen food, fr plate, sugar, semolina, bread crumbs, milk, chemical products, semi-finished products, etc.
to 450 odwa?e? per minute in combination mode
 to 540 odwa?e? per minute in the metering mode
 portion weight for an individual throw: up to 500 g
 the possible greater weight in large servings or multiple shot
 maximum accuracy
 fully automatic calibration and tare
 product-specific accessories
 compact water and dust-resistant design
 application: combination, mixing, counting, dosing
maximum accuracy and working time guaranteed by high resolution temperature compensating strain gauges with kalibruj?cymi scales of our implementation. calibration is done automatically according to the preset time intervals while the machine is in operation.
double-open flip flops designed for fast and clean, which is especially beneficial when the difficult and highly viscous products.

all parts contacting with the product are available in many materials such as profiled or smooth plastic or metal to work with different products. these parts are interchangeable and can be removed quickly and easily without the use of tools to clean, change the product or service. 

intelligent automatic control administration eliminates the need for matching machine for the product by the operator. each radial feeder is automatically optimized in order to obtain the highest efficiency of weighting based on the flow of the product.

year of manufacture: 2000
  VERTICAL PACKING MACHINE HSV 101 S FLEXIBLE ALONG WITH THE CONVEYOR CAN BE COMPENSATED WITH DILDO DECENTRALIZED DRIVE AND FLEXIBLE CONTROL OF THE MACHINE IS WELDING TORCH SYSTEM THE DEVICE IS COMPLETELY DECENTRALISED STRUCTURE DRIVE A WIDE RANGE OF PACKAGING AND BULK PRODUCTS EASY CONTROL AND PROGRAMMING A WIDE RANGE OF OPTIONAL EQUIPMENT EASY REPLACEMENT OF THE TUBE WITH FLANGE BY MEANS OF CLAMPS QUICK CHANGE CLAMPING UNITS EFFECTIVELY SET THE CUT AS A SIGN OF LOW ENERGY CONSUMPTION 100 MEMORY SETTINGS AUTOMATIC CENTRING FILM SELF DIAGNOSTICS A WIDE RANGE OF MOULDING PACKAGING SYSTEM EASY TO CONNECT FILM MATERIALS COMBINED HOT SUCH AS PP, PAPER, PE, ETC. THERMOPLASTIC MATERIALS SUCH AS PE FOIL, ETC. THE EFFICIENCY OF THE MACHINE DEPENDS ON THE PRODUCT TO BE PACKAGED, PACKAGING MATERIAL, PACKAGING SIZE AND TYPE OF MEASURING DEVICE THE YEAR OF MANUFACTURE: 2000 14 HEAD NAWA?ARKA-WEIGHT MULTIPOND MP 1401-C UNIVERSAL HIGH-PRECISION DISPENSER MULTI-HEAD CONSIDERATIONS ALL KINDS OF BULK PRODUCTS AND GRANULATES, FOR EXAMPLE, SUCH AS PASTA, CANDY, NUTS, SEEDS, SPICES, COFFEE, CAKES, CHOCOLATE, FROZEN FOOD, FR PLATE, SUGAR, SEMOLINA, BREAD CRUMBS, MILK, CHEMICAL PRODUCTS, SEMI-FINISHED PRODUCTS, ETC. TO 450 ODWA?E? PER MINUTE IN COMBINATION MODE TO 540 ODWA?E? PER MINUTE IN THE METERING MODE PORTION WEIGHT FOR AN INDIVIDUAL THROW: UP TO 500 G THE POSSIBLE GREATER WEIGHT IN LARGE SERVINGS OR MULTIPLE SHOT MAXIMUM ACCURACY FULLY AUTOMATIC CALIBRATION AND TARE PRODUCT-SPECIFIC ACCESSORIES COMPACT WATER AND DUST-RESISTANT DESIGN APPLICATION: COMBINATION, MIXING, COUNTING, DOSING MAXIMUM ACCURACY AND WORKING TIME GUARANTEED BY HIGH RESOLUTION TEMPERATURE COMPENSATING STRAIN GAUGES WITH KALIBRUJ?CYMI SCALES OF OUR IMPLEMENTATION. CALIBRATION IS DONE AUTOMATICALLY ACCORDING TO THE PRESET TIME INTERVALS WHILE THE MACHINE IS IN OPERATION. DOUBLE-OPEN FLIP FLOPS DESIGNED FOR FAST AND CLEAN, WHICH IS ESPECIALLY BENEFICIAL WHEN THE DIFFICULT AND HIGHLY VISCOUS PRODUCTS. ALL PARTS CONTACTING WITH THE PRODUCT ARE AVAILABLE IN MANY MATERIALS SUCH AS PROFILED OR SMOOTH PLASTIC OR METAL TO WORK WITH DIFFERENT PRODUCTS. THESE PARTS ARE INTERCHANGEABLE AND CAN BE REMOVED QUICKLY AND EASILY WITHOUT THE USE OF TOOLS TO CLEAN, CHANGE THE PRODUCT OR SERVICE. INTELLIGENT AUTOMATIC CONTROL ADMINISTRATION ELIMINATES THE NEED FOR MATCHING MACHINE FOR THE PRODUCT BY THE OPERATOR. EACH RADIAL FEEDER IS AUTOMATICALLY OPTIMIZED IN ORDER TO OBTAIN THE HIGHEST EFFICIENCY OF WEIGHTING BASED ON THE FLOW OF THE PRODUCT. YEAR OF MANUFACTURE: 2000
Vendedor: Tiger Job Sp. z o.o.
Año de construcción: usado
Precio: 13.900 €
Ubicación: Land-technical data feeding conveyor, underfloor, position 12 <br/>manufacturer bollegraaf <br/>typ hbt 1200/1600<br/>year of construction 1998<br/>driving motor 5,5 kw<br/>length feeding conveyor 9,440 mm<br/>effecting width 1,550 mm<br/>height of side wall feeding conv. 550 mm<br/>transport dimensions over all approx. 9,600 x 2,300 x 1,500 mm (l x b x h)<br/>weight approx. 5,000 kg<br/> <br/>technical data elevating conveyor with goose neck, position 15 <br/>manufacturer bollegraaf <br/>typ hbt 1200/1600<br/>year of construction 1998<br/>driving motor  5,5 kw<br/>length feeding conveyor 4,728 mm<br/>length elevating conveyor 16,377 mm<br/>length goose neck 1,389 mm<br/>grade 30°<br/>effecting width 1,550 mm<br/>height of side wall feeding conv. 550 mm<br/>height of side wall elevating conv. 850 mm<br/>transport dimensions over all approx. 22,300 x 2,830 x 3,250 mm (l x b x h) <br/>weight approx. 10,500 kg<br/>comments:<br/>the conveyor belt is in an operational condition and immediately available. inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA FEEDING CONVEYOR, UNDERFLOOR, POSITION 12
MANUFACTURER BOLLEGRAAF
TYP HBT 1200/1600
YEAR OF CONSTRUCTION 1998
DRIVING MOTOR 5,5 KW
LENGTH FEEDING CONVEYOR 9,440 MM
EFFECTING WIDTH 1,550 MM
HEIGHT OF SIDE WALL FEEDING CONV. 550 MM
TRANSPORT DIMENSIONS OVER ALL APPROX. 9,600 X 2,300 X 1,500 MM (L X B X H)
WEIGHT APPROX. 5,000 KG

TECHNICAL DATA ELEVATING CONVEYOR WITH GOOSE NECK, POSITION 15
MANUFACTURER BOLLEGRAAF
TYP HBT 1200/1600
YEAR OF CONSTRUCTION 1998
DRIVING MOTOR 5,5 KW
LENGTH FEEDING CONVEYOR 4,728 MM
LENGTH ELEVATING CONVEYOR 16,377 MM
LENGTH GOOSE NECK 1,389 MM
GRADE 30°
EFFECTING WIDTH 1,550 MM
HEIGHT OF SIDE WALL FEEDING CONV. 550 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 850 MM
TRANSPORT DIMENSIONS OVER ALL APPROX. 22,300 X 2,830 X 3,250 MM (L X B X H)
WEIGHT APPROX. 10,500 KG
COMMENTS:
THE CONVEYOR BELT IS IN AN OPERATIONAL CONDITION AND IMMEDIATELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-3 floors x 1 sheet 60 x 80 cm or 2 x sheets 60 x 40 cm
with clipboard for leaves
with proofing cabinet
with hood fan
dms 3 master timer control
top and bottom can be set separately
performance:
ac / 3ph / n / pe 400 v / 50 hz 3 FLOORS X 1 SHEET 60 X 80 CM OR 2 X SHEETS 60 X 40 CM WITH CLIPBOARD FOR LEAVES WITH PROOFING CABINET WITH HOOD FAN DMS 3 MASTER TIMER CONTROL TOP AND BOTTOM CAN BE SET SEPARATELY PERFORMANCE: AC / 3PH / N / PE 400 V / 50 HZ
Vendedor: Güzel Taceddin
Año de construcción: usado
Ubicación: Land-manufacturer  unotech gmbh, niederlangen, germany<br/>typ 120 v5<br/>year of construction 2009<br/>hours of operation 52.810 h, stand january 2018<br/>press force main press 100 tons<br/>specific press force 145 n/m²<br/>max. cutting force 120 tons<br/>press force free stamper 25 tons<br/>feed channel 2,000 x 1,020 mm (l x w)<br/>capacity per cycle time 1,5 m³<br/>theoretic  throughput rate 650 m³/h<br/>bale size 1,100 x 750 mm (w x h)<br/>driving motor 2 x 75 kw<br/>connected load 160 kw<br/>rated current 280 a<br/>tying system 5 fold vertical, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 to 30 kg/cbm up to 15 tons/h<br/>bulk weight of 35 to 50 kg/cbm  up to 23 tons/h<br/>bulk weight of 60 kg/cbm  up to 27 tons/h<br/>bulk weight of 100 kg/cbm  up to 44 tons/h<br/>bale weight 600 up to 900 kg, depends on material<br/>sps controller (manuf., type)  siemens s7 300<br/>operating panel (manuf., type)  siemens simatic<br/>baler dimensions built up with hopper 20,000 x 23,000 x 6,190 mm (l x w x h)<br/>transport dimensions only baler 13,630 x 2,350 x 3,130 mm (l x w x h)<br/>machine weight baler approx. 37 tons<br/>accessories 4 wire stations for a total of 10 pieces 500 kg wire coils (wire not included in the sales volume)<br/><br/>condition of the baler:<br/>the baler was operated almost exclusively with paper and cardboard, therefore the low wear and tear. the machine has been serviced regularly and is in a really good condition, ready for operation  and need not fear any comparison. uncompromising quality with unique technical refinements distinguish this baler made by unotech.<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available. an inspection during operation is possible by appointment. we will not assume liability for the given technical data and possible errors.<br/><br/>technical data conveyor belt:<br/>manufacturer unotech<br/>typ kth 1700<br/>year of construction 2009<br/>driving motor 5,5 kw<br/>length feeding conveyor 6,000 mm<br/>length elevating conveyor 10,233 mm<br/>length goose neck 1,500 mm<br/>grade 30°<br/>effecting width 1,625 mm<br/>height of side wall feeding conv. 500 mm<br/>height of side wall elevating conv. 1,000 mm<br/>transport dimensions over all<br/>feeding conveyor 7,000 x 2,200 x 1,200 mm (l x b x h)<br/>elevating conveyor 13,600 x 2,200 x 1,500 mm (l x b x h)<br/>pit dimensions (conveyor belt) 10,650 x 2,125 / 3,640 mm x 1,200 mm ( l x w x h)<br/><br/>condition of the conveyor belt:<br/>the running rails, chains and the rubber belt are in a good and immediately operational condition. MANUFACTURER UNOTECH GMBH, NIEDERLANGEN, GERMANY
TYP 120 V5
YEAR OF CONSTRUCTION 2009
HOURS OF OPERATION 52.810 H, STAND JANUARY 2018
PRESS FORCE MAIN PRESS 100 TONS
SPECIFIC PRESS FORCE 145 N/M²
MAX. CUTTING FORCE 120 TONS
PRESS FORCE FREE STAMPER 25 TONS
FEED CHANNEL 2,000 X 1,020 MM (L X W)
CAPACITY PER CYCLE TIME 1,5 M³
THEORETIC THROUGHPUT RATE 650 M³/H
BALE SIZE 1,100 X 750 MM (W X H)
DRIVING MOTOR 2 X 75 KW
CONNECTED LOAD 160 KW
RATED CURRENT 280 A
TYING SYSTEM 5 FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 TO 30 KG/CBM UP TO 15 TONS/H
BULK WEIGHT OF 35 TO 50 KG/CBM UP TO 23 TONS/H
BULK WEIGHT OF 60 KG/CBM UP TO 27 TONS/H
BULK WEIGHT OF 100 KG/CBM UP TO 44 TONS/H
BALE WEIGHT 600 UP TO 900 KG, DEPENDS ON MATERIAL
SPS CONTROLLER (MANUF., TYPE) SIEMENS S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC
BALER DIMENSIONS BUILT UP WITH HOPPER 20,000 X 23,000 X 6,190 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 13,630 X 2,350 X 3,130 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 37 TONS
ACCESSORIES 4 WIRE STATIONS FOR A TOTAL OF 10 PIECES 500 KG WIRE COILS (WIRE NOT INCLUDED IN THE SALES VOLUME)

CONDITION OF THE BALER:
THE BALER WAS OPERATED ALMOST EXCLUSIVELY WITH PAPER AND CARDBOARD, THEREFORE THE LOW WEAR AND TEAR. THE MACHINE HAS BEEN SERVICED REGULARLY AND IS IN A REALLY GOOD CONDITION, READY FOR OPERATION AND NEED NOT FEAR ANY COMPARISON. UNCOMPROMISING QUALITY WITH UNIQUE TECHNICAL REFINEMENTS DISTINGUISH THIS BALER MADE BY UNOTECH.

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. AN INSPECTION DURING OPERATION IS POSSIBLE BY APPOINTMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.

TECHNICAL DATA CONVEYOR BELT:
MANUFACTURER UNOTECH
TYP KTH 1700
YEAR OF CONSTRUCTION 2009
DRIVING MOTOR 5,5 KW
LENGTH FEEDING CONVEYOR 6,000 MM
LENGTH ELEVATING CONVEYOR 10,233 MM
LENGTH GOOSE NECK 1,500 MM
GRADE 30°
EFFECTING WIDTH 1,625 MM
HEIGHT OF SIDE WALL FEEDING CONV. 500 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 1,000 MM
TRANSPORT DIMENSIONS OVER ALL
FEEDING CONVEYOR 7,000 X 2,200 X 1,200 MM (L X B X H)
ELEVATING CONVEYOR 13,600 X 2,200 X 1,500 MM (L X B X H)
PIT DIMENSIONS (CONVEYOR BELT) 10,650 X 2,125 / 3,640 MM X 1,200 MM ( L X W X H)

CONDITION OF THE CONVEYOR BELT:
THE RUNNING RAILS, CHAINS AND THE RUBBER BELT ARE IN A GOOD AND IMMEDIATELY OPERATIONAL CONDITION.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-m. no.: 804510a - 498
format (cm): 	420 x 210 / 30 mm			
equipment / additional information:			
input ac: 230v~ 50hz 1.7a
 M. NO.: 804510A - 498 FORMAT (CM): 420 X 210 / 30 MM EQUIPMENT / ADDITIONAL INFORMATION: INPUT AC: 230V~ 50HZ 1.7A
Vendedor: MJS-LINE GmbH
Año de construcción: usado
Ubicación: Land-length: 1200 mm<br/>width: 700 mm<br/>height over floor: 850 mm<br/>work table without vice, can be added (additional fee). <br/>chuck width 125mm. right side has three draws. <br/>can be locked with keys. <br/><br/><br/><br/><br/> LENGTH: 1200 MM
WIDTH: 700 MM
HEIGHT OVER FLOOR: 850 MM
WORK TABLE WITHOUT VICE, CAN BE ADDED (ADDITIONAL FEE).
CHUCK WIDTH 125MM. RIGHT SIDE HAS THREE DRAWS.
CAN BE LOCKED WITH KEYS.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-
concrete mixing plant fabr. kabag wiggert type mobilmat 80

capacity: 80 mâ³ / h
==================

planetary countercurrent mixer kabag type mo 80 cc s - 1
hpgm 2250, 2.5 cbm fixed output

with a fl micro wave probe
2 outlets

2. cement silos 㢠60 to

silo of rows of, 6 chambers ã  30 to

CONCRETE MIXING PLANT FABR. KABAG WIGGERT TYPE MOBILMAT 80 CAPACITY: 80 M&ACIRC;&SUP3; / H ================== PLANETARY COUNTERCURRENT MIXER KABAG TYPE MO 80 CC S - 1 HPGM 2250, 2.5 CBM FIXED OUTPUT WITH A FL MICRO WAVE PROBE 2 OUTLETS 2. CEMENT SILOS &ATILDE;&CENT; 60 TO SILO OF ROWS OF, 6 CHAMBERS &ATILDE;&NBSP; 30 TO
Vendedor: EL-Maschinenbörse GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 360 mm<br/>turning length: 1050 mm<br/>swing diameter over bed slide: ? mm<br/>weight of the machine ca.: 1,9 t<br/><br/><br/><br/><br/> TURNING DIAMETER: 360 MM
TURNING LENGTH: 1050 MM
SWING DIAMETER OVER BED SLIDE: ? MM
WEIGHT OF THE MACHINE CA.: 1,9 T




Vendedor: Hop Machines
Año de construcción: usado
Ubicación: Land-we offer new and used at reasonable prices bottom shelves and 2-storey compartment floor shelf systems.

bottom shelves are perfect for that, to effectively store small parts.
a good storage in a professional floor rack system guarantees short pick times and saves so much time and money.
their employees have shorter routes and waste no time to find the right article.
a dream for every mail.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.    WE OFFER NEW AND USED AT REASONABLE PRICES BOTTOM SHELVES AND 2-STOREY COMPARTMENT FLOOR SHELF SYSTEMS. BOTTOM SHELVES ARE PERFECT FOR THAT, TO EFFECTIVELY STORE SMALL PARTS. A GOOD STORAGE IN A PROFESSIONAL FLOOR RACK SYSTEM GUARANTEES SHORT PICK TIMES AND SAVES SO MUCH TIME AND MONEY. THEIR EMPLOYEES HAVE SHORTER ROUTES AND WASTE NO TIME TO FIND THE RIGHT ARTICLE. A DREAM FOR EVERY MAIL. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Precio: used machinery auction RESALE 42.000 €
Ubicación: Land-weight approx.: 7300 kg<br/>dimensions (l x w x h) approx.: 10540 x 4230 x 3100  mm<br/>description:  elumatec sbz 130 machining centre - machine number 13000301026,  - max. machining length without end face machining 7200 mm, - with end face machining (tool dependent) 7080 mm,  - travel distance x 7200 mm,  - adjustment speed 60 m/min,  - travel distance y 485 mm,  - adjustment speed 30 m/min,  - travel distance z 340 mm,  - adjustment speed 30 m/min, max. 15000 rpm and 5.5 kw,  - tool cone holder bt 30,  - tool changer for 8 holders,  - max. cutter diameter 25 mm,  - max. disc cutter diameter 180 mm,  - tool length (from cone size) max. 150 mm,  - air consumption with spraying approx. 100 l/min,  - with 3-axis control elucam,  - front only light barrier,  - no middle table,  - 4th axis rotation angle heads 2 pieces er 20, i = 1:1, 185, slow - running spindle i = 5:1, n 1 mx. 4500 rpm,  - 3 x collet chucks er 32 2 to 20 mm,  - 2 x quick-action chucks bt 30 l = 110 mm for drills 1 to 13 mm,  - collet chuck set for sbz 130,  - er 32 double slotted,  - 2 x cutter set pn for sbz 130 steel-stainless steel,  - 1 x length measurement for profile bar elucam complete documentation with circuit diagrams, 8 pneumatic workpiece clamping devices, safety light barrier system in front, foot mat, foot switch, machine light, tool cabinet with collets in 6 drawers, 2 precision profile vices gerardi modular vise, jaw width 150 mm, both with a set of additional v-block clamping jaws, 2 additional adapter plates for mounting on the clamping jaws. WEIGHT APPROX.: 7300 KG
DIMENSIONS (L X W X H) APPROX.: 10540 X 4230 X 3100 MM
DESCRIPTION: ELUMATEC SBZ 130 MACHINING CENTRE - MACHINE NUMBER 13000301026, - MAX. MACHINING LENGTH WITHOUT END FACE MACHINING 7200 MM, - WITH END FACE MACHINING (TOOL DEPENDENT) 7080 MM, - TRAVEL DISTANCE X 7200 MM, - ADJUSTMENT SPEED 60 M/MIN, - TRAVEL DISTANCE Y 485 MM, - ADJUSTMENT SPEED 30 M/MIN, - TRAVEL DISTANCE Z 340 MM, - ADJUSTMENT SPEED 30 M/MIN, MAX. 15000 RPM AND 5.5 KW, - TOOL CONE HOLDER BT 30, - TOOL CHANGER FOR 8 HOLDERS, - MAX. CUTTER DIAMETER 25 MM, - MAX. DISC CUTTER DIAMETER 180 MM, - TOOL LENGTH (FROM CONE SIZE) MAX. 150 MM, - AIR CONSUMPTION WITH SPRAYING APPROX. 100 L/MIN, - WITH 3-AXIS CONTROL ELUCAM, - FRONT ONLY LIGHT BARRIER, - NO MIDDLE TABLE, - 4TH AXIS ROTATION ANGLE HEADS 2 PIECES ER 20, I = 1:1, 185, SLOW - RUNNING SPINDLE I = 5:1, N 1 MX. 4500 RPM, - 3 X COLLET CHUCKS ER 32 2 TO 20 MM, - 2 X QUICK-ACTION CHUCKS BT 30 L = 110 MM FOR DRILLS 1 TO 13 MM, - COLLET CHUCK SET FOR SBZ 130, - ER 32 DOUBLE SLOTTED, - 2 X CUTTER SET PN FOR SBZ 130 STEEL-STAINLESS STEEL, - 1 X LENGTH MEASUREMENT FOR PROFILE BAR ELUCAM COMPLETE DOCUMENTATION WITH CIRCUIT DIAGRAMS, 8 PNEUMATIC WORKPIECE CLAMPING DEVICES, SAFETY LIGHT BARRIER SYSTEM IN FRONT, FOOT MAT, FOOT SWITCH, MACHINE LIGHT, TOOL CABINET WITH COLLETS IN 6 DRAWERS, 2 PRECISION PROFILE VICES GERARDI MODULAR VISE, JAW WIDTH 150 MM, BOTH WITH A SET OF ADDITIONAL V-BLOCK CLAMPING JAWS, 2 ADDITIONAL ADAPTER PLATES FOR MOUNTING ON THE CLAMPING JAWS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-miwe condo floors store oven
type: co 4.0608

4 floors
for each 60 x 80 cm trays
2 double chamber floors with each control
each floor with stone hearth
entrance floor height of 13 cm digital control system miwe fp control
mobile on castors

proofing cabinet
digital control
16 stipulations and requirements 8
for trays 60 x 40 cm or 60 x 80 cm trays

dimensions: height: 210 cm width: 90 cm
depth: 120 cm specifications: year: 2010 400/230v / 50 hz / 19.6 kw electric MIWE CONDO FLOORS STORE OVEN TYPE: CO 4.0608 4 FLOORS FOR EACH 60 X 80 CM TRAYS 2 DOUBLE CHAMBER FLOORS WITH EACH CONTROL EACH FLOOR WITH STONE HEARTH ENTRANCE FLOOR HEIGHT OF 13 CM DIGITAL CONTROL SYSTEM MIWE FP CONTROL MOBILE ON CASTORS PROOFING CABINET DIGITAL CONTROL 16 STIPULATIONS AND REQUIREMENTS 8 FOR TRAYS 60 X 40 CM OR 60 X 80 CM TRAYS DIMENSIONS: HEIGHT: 210 CM WIDTH: 90 CM DEPTH: 120 CM SPECIFICATIONS: YEAR: 2010 400/230V / 50 HZ / 19.6 KW ELECTRIC
Vendedor: Güzel Taceddin
Año de construcción: usado
Precio: 85 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-1 courtyard entrance / gate, new, drive with dead-man switch
gates suitable for up to 10 meters icaro nf prox - 230 v ac 750 watt - 9 m / min continuous operation dead man control, optional radio control only with pressure bar package,(gesamtlã¤nge: ca. 9.500 mm), single / self-supporting, clear opening width: 7.000 mm x height: 1,950 mm, material: frame rectangle tube and lattice mats filling in static adequate dimensioning, 1 post with base plate and 4 holes, height: 1,950 mm, incl. mounting material and foundation plan, gate is on closing direction / driveway bolted to the foundation, right or left (seen from outside), surface: hot-dip galvanized, item location: ex works, self assembly.

price: on request!

freight cost: on request!

other dimensions, coatings and mounting types on request. 

delivery time: approx. 6-10 weeks (depending on the season)! 1 COURTYARD ENTRANCE / GATE, NEW, DRIVE WITH DEAD-MAN SWITCH GATES SUITABLE FOR UP TO 10 METERS ICARO NF PROX - 230 V AC 750 WATT - 9 M / MIN CONTINUOUS OPERATION DEAD MAN CONTROL, OPTIONAL RADIO CONTROL ONLY WITH PRESSURE BAR PACKAGE,(GESAMTL&ATILDE;&CURREN;NGE: CA. 9.500 MM), SINGLE / SELF-SUPPORTING, CLEAR OPENING WIDTH: 7.000 MM X HEIGHT: 1,950 MM, MATERIAL: FRAME RECTANGLE TUBE AND LATTICE MATS FILLING IN STATIC ADEQUATE DIMENSIONING, 1 POST WITH BASE PLATE AND 4 HOLES, HEIGHT: 1,950 MM, INCL. MOUNTING MATERIAL AND FOUNDATION PLAN, GATE IS ON CLOSING DIRECTION / DRIVEWAY BOLTED TO THE FOUNDATION, RIGHT OR LEFT (SEEN FROM OUTSIDE), SURFACE: HOT-DIP GALVANIZED, ITEM LOCATION: EX WORKS, SELF ASSEMBLY. PRICE: ON REQUEST! FREIGHT COST: ON REQUEST! OTHER DIMENSIONS, COATINGS AND MOUNTING TYPES ON REQUEST. DELIVERY TIME: APPROX. 6-10 WEEKS (DEPENDING ON THE SEASON)!
Vendedor: Vertriebsbüro Süd
Año de construcción: usado
Precio: 1.750 €
Ubicación: Land-spot welder, punk welding machine, spot welding machine, spot welding gun <br /><br /> -stationary <br /> operation by foot switch <br /> length of welding machine 340 mm <br /> working stroke 81 mm <br /> -max. distance electrodes 315 mm <br /> -schwei?zange <br /> -control <br /> -transport dimensions 1200/800 / h1500 mm <br /> -weight 390 kg <br /> SPOT WELDER, PUNK WELDING MACHINE, SPOT WELDING MACHINE, SPOT WELDING GUN

-STATIONARY
OPERATION BY FOOT SWITCH
LENGTH OF WELDING MACHINE 340 MM
WORKING STROKE 81 MM
-MAX. DISTANCE ELECTRODES 315 MM
-SCHWEI?ZANGE
-CONTROL
-TRANSPORT DIMENSIONS 1200/800 / H1500 MM
-WEIGHT 390 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 27.000 €
Ubicación: Land-engine details

stock number 1105-02533 machine type machining center - vertical make chiron type fz 08 kw built in 2004 control type cnc storage france country of origin germany delivery immediately cargo base stock haguenau france technical details

x trail 450 mm y way 270 mm z-way 310 mm table size 660 350 x 2 mm spindle retainer hsk-a 40 speed range 20-15000 rpm speed - longitudinal/transverse/vertical 75 m / min distance spindle/table 170-420 mm number of tool magazine 24 tool diameter max . 63 mm tool length of max 160 mm tool weight of 2 kg total power of 17 kw additional information

control siemens 840 d wechselteiltisch 2 x 660 x 350 x 180 â°
 spindle 15000 rpm
 24 compartment tool changer
 ikz high pressure of 70 bars by knoll pump
 direct position measuring system
 spindle kuhler
 spaenefoerderer ENGINE DETAILS STOCK NUMBER 1105-02533 MACHINE TYPE MACHINING CENTER - VERTICAL MAKE CHIRON TYPE FZ 08 KW BUILT IN 2004 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASE STOCK HAGUENAU FRANCE TECHNICAL DETAILS X TRAIL 450 MM Y WAY 270 MM Z-WAY 310 MM TABLE SIZE 660 350 X 2 MM SPINDLE RETAINER HSK-A 40 SPEED RANGE 20-15000 RPM SPEED - LONGITUDINAL/TRANSVERSE/VERTICAL 75 M / MIN DISTANCE SPINDLE/TABLE 170-420 MM NUMBER OF TOOL MAGAZINE 24 TOOL DIAMETER MAX . 63 MM TOOL LENGTH OF MAX 160 MM TOOL WEIGHT OF 2 KG TOTAL POWER OF 17 KW ADDITIONAL INFORMATION CONTROL SIEMENS 840 D WECHSELTEILTISCH 2 X 660 X 350 X 180 &ACIRC;&DEG; SPINDLE 15000 RPM 24 COMPARTMENT TOOL CHANGER IKZ HIGH PRESSURE OF 70 BARS BY KNOLL PUMP DIRECT POSITION MEASURING SYSTEM SPINDLE KUHLER SPAENEFOERDERER
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 40 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-rotational speed: 16-2000/min, turning length: 2000mm, year of construction: ca. 1995.  ROTATIONAL SPEED: 16-2000/MIN, TURNING LENGTH: 2000MM, YEAR OF CONSTRUCTION: CA. 1995.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 40 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 3.650 €
Ubicación: Land-it is a used seewer rondo kombi sheeter for sale. all bands of the machine are new. all bearings are renewed. new scraper knife scraper pairs are used. the machine is in very good condition, fully functional and repainted.
the combined dough sheeter is suitable for all types of dough and finally rolling out bread for work of all bread dough places, rye, wheat and mixed bread dough with straight final, the long braid, pretzel rods, as well as work by parisian bread roles and caviar bars. also table can be produced. applied dough piece are hammered rolled out.
technical data:
- with extending table
- equipped with manual, continuous roll position
- prevents jamming synchromesh gearbox, shrink or tear the dough band
- band width 60 cm
- roller length 633 mm
- roller adjustment manual
- length 1685 mm (rest position)
- length 2090 mm for rolling out (working position)
- width: 1100mm, height: 1250mm
- output 0,75 kw
- weight approx. 300kg
a video can be sent on request.  IT IS A USED SEEWER RONDO KOMBI SHEETER FOR SALE. ALL BANDS OF THE MACHINE ARE NEW. ALL BEARINGS ARE RENEWED. NEW SCRAPER KNIFE SCRAPER PAIRS ARE USED. THE MACHINE IS IN VERY GOOD CONDITION, FULLY FUNCTIONAL AND REPAINTED. THE COMBINED DOUGH SHEETER IS SUITABLE FOR ALL TYPES OF DOUGH AND FINALLY ROLLING OUT BREAD FOR WORK OF ALL BREAD DOUGH PLACES, RYE, WHEAT AND MIXED BREAD DOUGH WITH STRAIGHT FINAL, THE LONG BRAID, PRETZEL RODS, AS WELL AS WORK BY PARISIAN BREAD ROLES AND CAVIAR BARS. ALSO TABLE CAN BE PRODUCED. APPLIED DOUGH PIECE ARE HAMMERED ROLLED OUT. TECHNICAL DATA: - WITH EXTENDING TABLE - EQUIPPED WITH MANUAL, CONTINUOUS ROLL POSITION - PREVENTS JAMMING SYNCHROMESH GEARBOX, SHRINK OR TEAR THE DOUGH BAND - BAND WIDTH 60 CM - ROLLER LENGTH 633 MM - ROLLER ADJUSTMENT MANUAL - LENGTH 1685 MM (REST POSITION) - LENGTH 2090 MM FOR ROLLING OUT (WORKING POSITION) - WIDTH: 1100MM, HEIGHT: 1250MM - OUTPUT 0,75 KW - WEIGHT APPROX. 300KG A VIDEO CAN BE SENT ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Precio: 950 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-ser. no.: 63524 22600
format (cm):				50x70		
equipment / additional information:	
pockets:				4
swords :				2				
	
before and downstream perforating waves 

  SER. NO.: 63524 22600 FORMAT (CM): 50X70 EQUIPMENT / ADDITIONAL INFORMATION: POCKETS: 4 SWORDS : 2 BEFORE AND DOWNSTREAM PERFORATING WAVES
Vendedor: MJS-LINE GmbH
Año de construcción: usado
Precio: 80 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-m. no.: 6311391
format (cm):			92						
equipment / additional information:
safety barrier, air table, 1xreserve knife

cutting height(mm):	920	
table depth(mm):	130

  M. NO.: 6311391 FORMAT (CM): 92 EQUIPMENT / ADDITIONAL INFORMATION: SAFETY BARRIER, AIR TABLE, 1XRESERVE KNIFE CUTTING HEIGHT(MM): 920 TABLE DEPTH(MM): 130
Vendedor: MJS-LINE GmbH
Año de construcción: usado
Precio: 90 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-machine specification

year: 1998 
control unit: cc 100 

injection unit: 1350/...
screw diameter: 90 mm 
injection pressure: 1910 bar 
injection volume: 2480 ccm 
shot capacity: 2256 g 

clamping unit: .../1200
clamping force: 1200 t 
platen size: 1990 x 1740 mm 
distance between tie bars: 1400 x 1150 mm 
mould height: 500...1200 mm 
opening storke: 1100 mm 
max.daylight: 2300 mm 
ejector stroke: 300 mm 

general information:
delivery time: now 
weight: 78.000 kg 

equipment:
- optional: 2 component machine, additional screw: 70 mm diameter
- cascade 8-times pneumatic
- cascade 8-times hydraulic
- 32 zone hotrunner controller MACHINE SPECIFICATION YEAR: 1998 CONTROL UNIT: CC 100 INJECTION UNIT: 1350/... SCREW DIAMETER: 90 MM INJECTION PRESSURE: 1910 BAR INJECTION VOLUME: 2480 CCM SHOT CAPACITY: 2256 G CLAMPING UNIT: .../1200 CLAMPING FORCE: 1200 T PLATEN SIZE: 1990 X 1740 MM DISTANCE BETWEEN TIE BARS: 1400 X 1150 MM MOULD HEIGHT: 500...1200 MM OPENING STORKE: 1100 MM MAX.DAYLIGHT: 2300 MM EJECTOR STROKE: 300 MM GENERAL INFORMATION: DELIVERY TIME: NOW WEIGHT: 78.000 KG EQUIPMENT: - OPTIONAL: 2 COMPONENT MACHINE, ADDITIONAL SCREW: 70 MM DIAMETER - CASCADE 8-TIMES PNEUMATIC - CASCADE 8-TIMES HYDRAULIC - 32 ZONE HOTRUNNER CONTROLLER
Vendedor: EuropNet GmbH
Año de construcción: usado
Precio: 28 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-we offer a chp caterpillar g3520e for sale. the chp is complete with all accessories (cabinet, gas line, muffler, exhaust-gas heat exchanger, platt heat exchangers and pumps. the chp had been until its closure in the operation and is functional, excellent condition! 

technical data:
engine: caterpillar g3520e
performance: 1999 kw
year of construction: 2012
builder: caterpillar 2499 kva, 400 v, 1500 1/min, hours of operation: 33.700 h
year of construction: 2012  WE OFFER A CHP CATERPILLAR G3520E FOR SALE. THE CHP IS COMPLETE WITH ALL ACCESSORIES (CABINET, GAS LINE, MUFFLER, EXHAUST-GAS HEAT EXCHANGER, PLATT HEAT EXCHANGERS AND PUMPS. THE CHP HAD BEEN UNTIL ITS CLOSURE IN THE OPERATION AND IS FUNCTIONAL, EXCELLENT CONDITION! TECHNICAL DATA: ENGINE: CATERPILLAR G3520E PERFORMANCE: 1999 KW YEAR OF CONSTRUCTION: 2012 BUILDER: CATERPILLAR 2499 KVA, 400 V, 1500 1/MIN, HOURS OF OPERATION: 33.700 H YEAR OF CONSTRUCTION: 2012
Vendedor: BA-Generatoren
Año de construcción: usado
Precio: 28 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 2.657 €
Ubicación: Land-used hünnebeck bosta scaffold incl. anchoring
parts list:
28 x vertical frame 200/70
48 x wood plank 250/32
3 x guardrail support 1 m (l)
2 x railing posts 1 m (i)
2 x double post (h)
48 x guardrails 250
8 x b safety railing 70q
8 x diagonal 200
14 x base plate 50
10 x wall tie 50-65
10 x normal coupler USED HüNNEBECK BOSTA SCAFFOLD INCL. ANCHORING PARTS LIST: 28 X VERTICAL FRAME 200/70 48 X WOOD PLANK 250/32 3 X GUARDRAIL SUPPORT 1 M (L) 2 X RAILING POSTS 1 M (I) 2 X DOUBLE POST (H) 48 X GUARDRAILS 250 8 X B SAFETY RAILING 70Q 8 X DIAGONAL 200 14 X BASE PLATE 50 10 X WALL TIE 50-65 10 X NORMAL COUPLER
Vendedor: Cetrac GmbH
Año de construcción: usado
Precio: 38 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 19.900 €
Ubicación: Land-tin snips, shears, shear (k020)

brand: volz
type: eurocut
year of production: around 1995
weight: approx. 10-12 tons
description: hydraulic bechschere volz eurocat with 3,000 mm max sheet width
max attack 1. 000mm, sheet thickness up to 12 mm
cutting angle adjustment, hydraulic clamp
condition: used, well maintained good condition, fully operational, loading possible

commission: sales in the sales order.

net price: â?¬19.900,00 + 19% vat (vat is shown)
gross price: â?¬23.681,00 incl. 19% vat

87742 apfeltrach, visit is at any time possible and desirable, for questions, andreas wiã?miller is available under the following telephone number: 0160/8037872 at your disposal. 

the goods are sold as seen and tested exclusively for commercial purposes, without any guarantee and warranty! 

we can arrange the preparation of export documents and the transport for you worldwide. 

all information without guarantee, errors and spelling mistakes, and subject to prior sale!
 TIN SNIPS, SHEARS, SHEAR (K020) BRAND: VOLZ TYPE: EUROCUT YEAR OF PRODUCTION: AROUND 1995 WEIGHT: APPROX. 10-12 TONS DESCRIPTION: HYDRAULIC BECHSCHERE VOLZ EUROCAT WITH 3,000 MM MAX SHEET WIDTH MAX ATTACK 1. 000MM, SHEET THICKNESS UP TO 12 MM CUTTING ANGLE ADJUSTMENT, HYDRAULIC CLAMP CONDITION: USED, WELL MAINTAINED GOOD CONDITION, FULLY OPERATIONAL, LOADING POSSIBLE COMMISSION: SALES IN THE SALES ORDER. NET PRICE: &ACIRC;?&NOT;19.900,00 + 19% VAT (VAT IS SHOWN) GROSS PRICE: &ACIRC;?&NOT;23.681,00 INCL. 19% VAT 87742 APFELTRACH, VISIT IS AT ANY TIME POSSIBLE AND DESIRABLE, FOR QUESTIONS, ANDREAS WI&ATILDE;?MILLER IS AVAILABLE UNDER THE FOLLOWING TELEPHONE NUMBER: 0160/8037872 AT YOUR DISPOSAL. THE GOODS ARE SOLD AS SEEN AND TESTED EXCLUSIVELY FOR COMMERCIAL PURPOSES, WITHOUT ANY GUARANTEE AND WARRANTY! WE CAN ARRANGE THE PREPARATION OF EXPORT DOCUMENTS AND THE TRANSPORT FOR YOU WORLDWIDE. ALL INFORMATION WITHOUT GUARANTEE, ERRORS AND SPELLING MISTAKES, AND SUBJECT TO PRIOR SALE!
Vendedor: AW Handels GmbH
Año de construcción: usado
Precio: 2.850 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-mustad autoline coastal system

manufactured year: 2006

condition: good, working

this line provides strong and proven solutions for vessels from approximately 10 meters, depending on the stability and deck space on board. setting and hauling 8.000 - 30.000 hooks in in-shore and often rocky sea-beds. can also combine different gear depending on seasons. 

advantages:

great return of investment by increased productivity, more hooks, and fewer bait expenses
less labor in a safer working environment 
ready to leave whenever - finished when you return to harbor 
easily adaptable to seasonal fisheries 
the attractive workspace also for generations to come 
the line consists of the next equipment:

1. hook separator hs sp 1000 

the main function of the hookseparator sp2000 is to separate the hoooks from the mainline and guide them onto the storage magazines. this is done automatically as the line is hauled onboard. the hookseparator is also a slack taker keeping tension on the line coming from the main hauler. 

2. baiter, coastal machine sb ez 1210


at three to four hooks per second the ma bm 3000 autobaiter cuts the bait at a pre-set size and baits the hooks consistently at a speed of up to 180 - 200 hooks per minute (3 - 4 hooks per second).

the bait is placed on a spiked conveyor belt that feeds it into the machine where the hooks trigger a knife to cut the bait at a pre-set size. equipped with the patented rotobaiter baiting system the bait is penetrated twice onto the hook before it's deployed over the stern.

3. hauling unit

4. magpacker system

it is a compact and functional storage of magazines loaded with hooks and line, tailored to available space on board the vessel. delivered with spacings between the magazines: 160 mm spacing < = 11 mm main line MUSTAD AUTOLINE COASTAL SYSTEM MANUFACTURED YEAR: 2006 CONDITION: GOOD, WORKING THIS LINE PROVIDES STRONG AND PROVEN SOLUTIONS FOR VESSELS FROM APPROXIMATELY 10 METERS, DEPENDING ON THE STABILITY AND DECK SPACE ON BOARD. SETTING AND HAULING 8.000 - 30.000 HOOKS IN IN-SHORE AND OFTEN ROCKY SEA-BEDS. CAN ALSO COMBINE DIFFERENT GEAR DEPENDING ON SEASONS. ADVANTAGES: GREAT RETURN OF INVESTMENT BY INCREASED PRODUCTIVITY, MORE HOOKS, AND FEWER BAIT EXPENSES LESS LABOR IN A SAFER WORKING ENVIRONMENT READY TO LEAVE WHENEVER - FINISHED WHEN YOU RETURN TO HARBOR EASILY ADAPTABLE TO SEASONAL FISHERIES THE ATTRACTIVE WORKSPACE ALSO FOR GENERATIONS TO COME THE LINE CONSISTS OF THE NEXT EQUIPMENT: 1. HOOK SEPARATOR HS SP 1000 THE MAIN FUNCTION OF THE HOOKSEPARATOR SP2000 IS TO SEPARATE THE HOOOKS FROM THE MAINLINE AND GUIDE THEM ONTO THE STORAGE MAGAZINES. THIS IS DONE AUTOMATICALLY AS THE LINE IS HAULED ONBOARD. THE HOOKSEPARATOR IS ALSO A SLACK TAKER KEEPING TENSION ON THE LINE COMING FROM THE MAIN HAULER. 2. BAITER, COASTAL MACHINE SB EZ 1210 AT THREE TO FOUR HOOKS PER SECOND THE MA BM 3000 AUTOBAITER CUTS THE BAIT AT A PRE-SET SIZE AND BAITS THE HOOKS CONSISTENTLY AT A SPEED OF UP TO 180 - 200 HOOKS PER MINUTE (3 - 4 HOOKS PER SECOND). THE BAIT IS PLACED ON A SPIKED CONVEYOR BELT THAT FEEDS IT INTO THE MACHINE WHERE THE HOOKS TRIGGER A KNIFE TO CUT THE BAIT AT A PRE-SET SIZE. EQUIPPED WITH THE PATENTED ROTOBAITER BAITING SYSTEM THE BAIT IS PENETRATED TWICE ONTO THE HOOK BEFORE IT'S DEPLOYED OVER THE STERN. 3. HAULING UNIT 4. MAGPACKER SYSTEM IT IS A COMPACT AND FUNCTIONAL STORAGE OF MAGAZINES LOADED WITH HOOKS AND LINE, TAILORED TO AVAILABLE SPACE ON BOARD THE VESSEL. DELIVERED WITH SPACINGS BETWEEN THE MAGAZINES: 160 MM SPACING < = 11 MM MAIN LINE
Vendedor: Normar Trading
Año de construcción: usado
Precio: 950 €
Ubicación: Land-proportional valve, directional control valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press<br /><br />-hydraulic control block comes from an injection molding machine<br />-manufacturer battenfeld<br />-proportional valve moog mod. d651-129b type p70fq03anz0<br />-valve rexroth type<br />-valve rexroth type<br />-voltage v<br />-pressure max. bar<br />-dimensions 370/190/h260 mm<br />-weight 37 kg PROPORTIONAL VALVE, DIRECTIONAL CONTROL VALVE, SOLENOID VALVE, HYDRAULIC VALVE, PRESSURE VALVE, VALVE BLOCK, CONTROL BLOCK, INJECTION MOLDING MACHINE, INJECTION MOLDING MACHINE, PLASTIC INJECTION MOLDING MACHINE, PLASTIC INJECTION MOLDING MACHINE, PLASTIC INJECTION MOLDING PRESS

-HYDRAULIC CONTROL BLOCK COMES FROM AN INJECTION MOLDING MACHINE
-MANUFACTURER BATTENFELD
-PROPORTIONAL VALVE MOOG MOD. D651-129B TYPE P70FQ03ANZ0
-VALVE REXROTH TYPE
-VALVE REXROTH TYPE
-VOLTAGE V
-PRESSURE MAX. BAR
-DIMENSIONS 370/190/H260 MM
-WEIGHT 37 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more ONA types: