113 ofertas

Año de construcción: usado
Precio: 14 €
Ubicación: Land-safety railing clamp for screwing

safety on every structure
these tried-and-tested systems give your site crew optimum protection and make a significant contribution to a smooth workflow. when the crew are properly protected, they work safely, which also means more rapidly and thus more efficiently – for your success.

doka handrail posts provide comprehensive safety
•	against fall hazards
•	on the structure and the formwork
•	thanks to their high quality (hot-dip galvanised)
•	conform to en 13374 class a
convenient and easy to mount
multi-functional
as they can be used in many different situations

? maximum safety with easy assembly 
? no squared timber waste 
 SAFETY RAILING CLAMP FOR SCREWING SAFETY ON EVERY STRUCTURE THESE TRIED-AND-TESTED SYSTEMS GIVE YOUR SITE CREW OPTIMUM PROTECTION AND MAKE A SIGNIFICANT CONTRIBUTION TO A SMOOTH WORKFLOW. WHEN THE CREW ARE PROPERLY PROTECTED, THEY WORK SAFELY, WHICH ALSO MEANS MORE RAPIDLY AND THUS MORE EFFICIENTLY – FOR YOUR SUCCESS. DOKA HANDRAIL POSTS PROVIDE COMPREHENSIVE SAFETY • AGAINST FALL HAZARDS • ON THE STRUCTURE AND THE FORMWORK • THANKS TO THEIR HIGH QUALITY (HOT-DIP GALVANISED) • CONFORM TO EN 13374 CLASS A CONVENIENT AND EASY TO MOUNT MULTI-FUNCTIONAL AS THEY CAN BE USED IN MANY DIFFERENT SITUATIONS ? MAXIMUM SAFETY WITH EASY ASSEMBLY ? NO SQUARED TIMBER WASTE
Vendedor: Berger International
Año de construcción: usado
Precio: 295 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 21.950 €
Ubicación: Land-boge screw compressor sd 90-3 air-cooled with boge energy saving refrigerant compressed air dryers

ready to use, automatically working with ce mark

-boge saving level effilence with optimised screw profile
-patented boge-gm - drive system provides high service life thanks to optimum operating slope side dynamically customized belt tension.
-pressure setting from the keyboard
-frost protection compressor up to-10 â° c
boge energy saving refrigerant compressed air dryers, integrated
-thanks to the integrated bypass the compressor operating without a dryer is easily possible

including: supply-air filtering
including: synthetic oil filling boge syprem s

control: focus 2.0 boge

hours of operation: 1.535 / control new - displays only test hours.

like new condition BOGE SCREW COMPRESSOR SD 90-3 AIR-COOLED WITH BOGE ENERGY SAVING REFRIGERANT COMPRESSED AIR DRYERS READY TO USE, AUTOMATICALLY WORKING WITH CE MARK -BOGE SAVING LEVEL EFFILENCE WITH OPTIMISED SCREW PROFILE -PATENTED BOGE-GM - DRIVE SYSTEM PROVIDES HIGH SERVICE LIFE THANKS TO OPTIMUM OPERATING SLOPE SIDE DYNAMICALLY CUSTOMIZED BELT TENSION. -PRESSURE SETTING FROM THE KEYBOARD -FROST PROTECTION COMPRESSOR UP TO-10 ° C BOGE ENERGY SAVING REFRIGERANT COMPRESSED AIR DRYERS, INTEGRATED -THANKS TO THE INTEGRATED BYPASS THE COMPRESSOR OPERATING WITHOUT A DRYER IS EASILY POSSIBLE INCLUDING: SUPPLY-AIR FILTERING INCLUDING: SYNTHETIC OIL FILLING BOGE SYPREM S CONTROL: FOCUS 2.0 BOGE HOURS OF OPERATION: 1.535 / CONTROL NEW - DISPLAYS ONLY TEST HOURS. LIKE NEW CONDITION
Vendedor: BOGE KOMPRESSOREN Otto Boge GmbH & Co.KG
Año de construcción: usado
Precio: 150 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 699 €
Ubicación: Land-boge microfilters f 380 m
innovative, energy-efficient, easy to maintain

-to the departure of finest impurities from the compressed air
which involved 99.99999% efficiency on particles greater than or equal to 0.01 âµm are
-significantly high dirt-holding capacity due to highly effective element fleeces
-enhanced filter surface through depth depth compared to conventional items
-optimum flow control at the lowest possible pressure resistance through innovative design

used, only briefly. BOGE MICROFILTERS F 380 M INNOVATIVE, ENERGY-EFFICIENT, EASY TO MAINTAIN -TO THE DEPARTURE OF FINEST IMPURITIES FROM THE COMPRESSED AIR WHICH INVOLVED 99.99999% EFFICIENCY ON PARTICLES GREATER THAN OR EQUAL TO 0.01 ÂΜM ARE -SIGNIFICANTLY HIGH DIRT-HOLDING CAPACITY DUE TO HIGHLY EFFECTIVE ELEMENT FLEECES -ENHANCED FILTER SURFACE THROUGH DEPTH DEPTH COMPARED TO CONVENTIONAL ITEMS -OPTIMUM FLOW CONTROL AT THE LOWEST POSSIBLE PRESSURE RESISTANCE THROUGH INNOVATIVE DESIGN USED, ONLY BRIEFLY.
Vendedor: BOGE KOMPRESSOREN Otto Boge GmbH & Co.KG
Año de construcción: usado
Precio: 220 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 3.700 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 2300 x 900 x 2000 mm<br/>description: see photos WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 2300 X 900 X 2000 MM
DESCRIPTION: SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-turning length: 1000 mm	
turning over bed: 590 mm	
speed: 45-1800 rpm	
spindle cone: mk 6	
spindle bore: 52 mm	
bed width: 250 mm	
machine dimensions:	
2025 x 915 x 1375 mm	
machine weight: 1550 kg	
accessories:	
digital display: dpa measurement	
3-jaw chuck Ø 200 mm	
4-jaw chuck Ø 250 mm	
clamping plate Ø 350 mm	
fixed + movable steady rest	
equipment of the machine base	
chiller chuck rotation stop as end stop with fine adjustment spindle brake and other accessories	 TURNING LENGTH: 1000 MM TURNING OVER BED: 590 MM SPEED: 45-1800 RPM SPINDLE CONE: MK 6 SPINDLE BORE: 52 MM BED WIDTH: 250 MM MACHINE DIMENSIONS: 2025 X 915 X 1375 MM MACHINE WEIGHT: 1550 KG ACCESSORIES: DIGITAL DISPLAY: DPA MEASUREMENT 3-JAW CHUCK Ø 200 MM 4-JAW CHUCK Ø 250 MM CLAMPING PLATE Ø 350 MM FIXED + MOVABLE STEADY REST EQUIPMENT OF THE MACHINE BASE CHILLER CHUCK ROTATION STOP AS END STOP WITH FINE ADJUSTMENT SPINDLE BRAKE AND OTHER ACCESSORIES
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 465 mm<br/>turning diameter over slide rest: 224 mm<br/>turning length: 1000 mm<br/>centre height: 230 mm<br/>speeds: 12 / 25 - 2000 u/min<br/>tool adaptor: camlock asa d1-6 <br/>spindle bore: 58 mm<br/>feeds - longitudinal: 42 /  0,031 - 1,7 mm/u<br/>feeds cross: 42 / 0,014 - 0,784 mm/u<br/>workpiece weight max.: 300 kg<br/>total power requirement: 5,5 kw<br/>weight of the machine ca.: 1,72 t<br/>dimensions of the machine ca.: 2,2 x 1,1 x 1,3 m<br/>electric 400 volt:  <br/>digital readout: 3 achsen <br/>3 jaw chuck: 250 mm<br/>multifix holder with several applications:  <br/>center:  <br/>boring chuck:  <br/>foot brake:  <br/>machinefeets:  <br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 465 MM
TURNING DIAMETER OVER SLIDE REST: 224 MM
TURNING LENGTH: 1000 MM
CENTRE HEIGHT: 230 MM
SPEEDS: 12 / 25 - 2000 U/MIN
TOOL ADAPTOR: CAMLOCK ASA D1-6
SPINDLE BORE: 58 MM
FEEDS - LONGITUDINAL: 42 / 0,031 - 1,7 MM/U
FEEDS CROSS: 42 / 0,014 - 0,784 MM/U
WORKPIECE WEIGHT MAX.: 300 KG
TOTAL POWER REQUIREMENT: 5,5 KW
WEIGHT OF THE MACHINE CA.: 1,72 T
DIMENSIONS OF THE MACHINE CA.: 2,2 X 1,1 X 1,3 M
ELECTRIC 400 VOLT:
DIGITAL READOUT: 3 ACHSEN
3 JAW CHUCK: 250 MM
MULTIFIX HOLDER WITH SEVERAL APPLICATIONS:
CENTER:
BORING CHUCK:
FOOT BRAKE:
MACHINEFEETS:
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-our industrial cutting tool range is designed for a wide range of industrial applications. the cutter of the model of icu 10 a 10 has cable blades with special blade guide. therefore this cutter especially for applications is how: cable recycling and cable production: telephone cables, underground cables, electric cables and steel cable.

â?¢ user friendly and ergonomic rotation system

â?¢ the flat lever/hinge pin design allows optimum
  range

â?¢ fast for an efficient (production) process

â?¢ longer torque thanks to permanent backup of the main stud

â?¢ various blade types available
-cutting capacities up to ca. 24, 7 t
-quickly and easily interchangeable

â?¢ safe
-tools can be used with both hands
-dead man device
-protection of moving parts
 
technical data:
maximum cutting force: ca. 242 kn, ca. 24, 7 tons
maximum opening width: 115 mm
maximum operating pressure: approx. 500 bar
dimensions: l b 737 x 222 x h 177 mm
weight: 17.3 kg OUR INDUSTRIAL CUTTING TOOL RANGE IS DESIGNED FOR A WIDE RANGE OF INDUSTRIAL APPLICATIONS. THE CUTTER OF THE MODEL OF ICU 10 A 10 HAS CABLE BLADES WITH SPECIAL BLADE GUIDE. THEREFORE THIS CUTTER ESPECIALLY FOR APPLICATIONS IS HOW: CABLE RECYCLING AND CABLE PRODUCTION: TELEPHONE CABLES, UNDERGROUND CABLES, ELECTRIC CABLES AND STEEL CABLE. &ACIRC;?&CENT; USER FRIENDLY AND ERGONOMIC ROTATION SYSTEM &ACIRC;?&CENT; THE FLAT LEVER/HINGE PIN DESIGN ALLOWS OPTIMUM RANGE &ACIRC;?&CENT; FAST FOR AN EFFICIENT (PRODUCTION) PROCESS &ACIRC;?&CENT; LONGER TORQUE THANKS TO PERMANENT BACKUP OF THE MAIN STUD &ACIRC;?&CENT; VARIOUS BLADE TYPES AVAILABLE -CUTTING CAPACITIES UP TO CA. 24, 7 T -QUICKLY AND EASILY INTERCHANGEABLE &ACIRC;?&CENT; SAFE -TOOLS CAN BE USED WITH BOTH HANDS -DEAD MAN DEVICE -PROTECTION OF MOVING PARTS TECHNICAL DATA: MAXIMUM CUTTING FORCE: CA. 242 KN, CA. 24, 7 TONS MAXIMUM OPENING WIDTH: 115 MM MAXIMUM OPERATING PRESSURE: APPROX. 500 BAR DIMENSIONS: L B 737 X 222 X H 177 MM WEIGHT: 17.3 KG
Vendedor: AGICOM-Pedergnana OEG
Año de construcción: usado
Precio: 2.950 €
Ubicación: Land-; gross weight [kg]: 1335; maximum lift capacity [kg]: 270 ; GROSS WEIGHT [KG]: 1335; MAXIMUM LIFT CAPACITY [KG]: 270
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-thank you for your interest in our gum extruder system we offer you as follows: many thanks for your interest on our new chewing gum extruder plant, please follow our offer find:
automatic extruding; rolling and scoring machine 7 â´ â´ /.
complete line for production of chewing gum sticks and chiclets

manufacturer: wls
type: chewing gum extrudier-, rolling and cutting machine
				gum extruder, rolling and cutting system
product: chewing gum sticks and chiclets
size (working width): 7 â´ â´ / 177mm other dimensions are possible on demand
type: wls ras 7 "with manual take-off
capacity: approx stick gum. 200-250 kg / h / chiclets approx. 250-350 kg / h
number of rolling stations: 4
number of cutting stations: 2
electrical: 400v 3 ph

7 "rolling and scoring machine incl. extruder
conveyor belt is covered with powdering material by means of sugar device reenlisted it takes over the extruded chewing gum sheet. the gum sheet is feed over a special table and a second sugar device which powders the upper surface of sheet.
a metal detector can be installed above the sonderanlagen belt witch stops the line as soon as metal particles are detected.
the following rolling machine is equipped with one set of knurled rollers and three sets of hardened smooth sizing rollers. the gap between the rollers is shown on a digital read out. between the first and the second smooth roller set a top and a bottom turn device is til table for inserting the gum sheet. the brushes are encased so that at optimum dust absorbing is guaranteed. a dust absorbing unit can be connected. for cutting rollers are mounted one cone and are easily exchangeable. the excess powder is taken over by a sonderanlagen belt arranged underneath the rollers and transport it to a collecting bin. a cross sonderanlagen belt transportation the gum scrap to the rear of the machine. loading means belt sonderanlagen of return it feed back to the extruder.

manual take off and pilling device:
after the last set of cutting rollers a pull-off sonderanlagen belt is fitted for the separating the cut sheets. these are now fed the trays which are placed at roll the end of the machine by means of guiding. as soon as the desired number of layers is reached the filled tray is replaced through a new one and the sheets are pilled again
machine delivered in normal steel with one set of cutting rollers for chewing gum sticks or tablets

execution / price: net plus vat, from location germany. unpacked and without other costs
net (excluded vat), exw germany, packaging and all other costs excluded

1 x "mild steel" rolling and scoring machine type 7 "euro 299.000,00
1 x metal detector 7 "euro 14.550,00
1 x dust _ absorbing unit type 7 "euro 21.550,00

total price ex works rohrbach euro 335.100,00

delivery time: osteo. 4 months after receipt of down payment and clarification of all
 technical and economical questions
terms of delivery: ex works rohrbach, packing not included all other costs excluded
payment terms: 50% down payment with the order on our banc account
		  50% balance payment on our banc account

german product, no cheap goods from asia, not purchased parts from asia, everything "made in germany!

we offer this machine with a warranty of 6 months in single-shift operation for sale. 

we offer this machine with warranty 6 months at 8hours working everyday, (incoterms exw), without packaging
 THANK YOU FOR YOUR INTEREST IN OUR GUM EXTRUDER SYSTEM WE OFFER YOU AS FOLLOWS: MANY THANKS FOR YOUR INTEREST ON OUR NEW CHEWING GUM EXTRUDER PLANT, PLEASE FOLLOW OUR OFFER FIND: AUTOMATIC EXTRUDING; ROLLING AND SCORING MACHINE 7 &ACIRC;&ACUTE; &ACIRC;&ACUTE; /. COMPLETE LINE FOR PRODUCTION OF CHEWING GUM STICKS AND CHICLETS MANUFACTURER: WLS TYPE: CHEWING GUM EXTRUDIER-, ROLLING AND CUTTING MACHINE GUM EXTRUDER, ROLLING AND CUTTING SYSTEM PRODUCT: CHEWING GUM STICKS AND CHICLETS SIZE (WORKING WIDTH): 7 &ACIRC;&ACUTE; &ACIRC;&ACUTE; / 177MM OTHER DIMENSIONS ARE POSSIBLE ON DEMAND TYPE: WLS RAS 7 "WITH MANUAL TAKE-OFF CAPACITY: APPROX STICK GUM. 200-250 KG / H / CHICLETS APPROX. 250-350 KG / H NUMBER OF ROLLING STATIONS: 4 NUMBER OF CUTTING STATIONS: 2 ELECTRICAL: 400V 3 PH 7 "ROLLING AND SCORING MACHINE INCL. EXTRUDER CONVEYOR BELT IS COVERED WITH POWDERING MATERIAL BY MEANS OF SUGAR DEVICE REENLISTED IT TAKES OVER THE EXTRUDED CHEWING GUM SHEET. THE GUM SHEET IS FEED OVER A SPECIAL TABLE AND A SECOND SUGAR DEVICE WHICH POWDERS THE UPPER SURFACE OF SHEET. A METAL DETECTOR CAN BE INSTALLED ABOVE THE SONDERANLAGEN BELT WITCH STOPS THE LINE AS SOON AS METAL PARTICLES ARE DETECTED. THE FOLLOWING ROLLING MACHINE IS EQUIPPED WITH ONE SET OF KNURLED ROLLERS AND THREE SETS OF HARDENED SMOOTH SIZING ROLLERS. THE GAP BETWEEN THE ROLLERS IS SHOWN ON A DIGITAL READ OUT. BETWEEN THE FIRST AND THE SECOND SMOOTH ROLLER SET A TOP AND A BOTTOM TURN DEVICE IS TIL TABLE FOR INSERTING THE GUM SHEET. THE BRUSHES ARE ENCASED SO THAT AT OPTIMUM DUST ABSORBING IS GUARANTEED. A DUST ABSORBING UNIT CAN BE CONNECTED. FOR CUTTING ROLLERS ARE MOUNTED ONE CONE AND ARE EASILY EXCHANGEABLE. THE EXCESS POWDER IS TAKEN OVER BY A SONDERANLAGEN BELT ARRANGED UNDERNEATH THE ROLLERS AND TRANSPORT IT TO A COLLECTING BIN. A CROSS SONDERANLAGEN BELT TRANSPORTATION THE GUM SCRAP TO THE REAR OF THE MACHINE. LOADING MEANS BELT SONDERANLAGEN OF RETURN IT FEED BACK TO THE EXTRUDER. MANUAL TAKE OFF AND PILLING DEVICE: AFTER THE LAST SET OF CUTTING ROLLERS A PULL-OFF SONDERANLAGEN BELT IS FITTED FOR THE SEPARATING THE CUT SHEETS. THESE ARE NOW FED THE TRAYS WHICH ARE PLACED AT ROLL THE END OF THE MACHINE BY MEANS OF GUIDING. AS SOON AS THE DESIRED NUMBER OF LAYERS IS REACHED THE FILLED TRAY IS REPLACED THROUGH A NEW ONE AND THE SHEETS ARE PILLED AGAIN MACHINE DELIVERED IN NORMAL STEEL WITH ONE SET OF CUTTING ROLLERS FOR CHEWING GUM STICKS OR TABLETS EXECUTION / PRICE: NET PLUS VAT, FROM LOCATION GERMANY. UNPACKED AND WITHOUT OTHER COSTS NET (EXCLUDED VAT), EXW GERMANY, PACKAGING AND ALL OTHER COSTS EXCLUDED 1 X "MILD STEEL" ROLLING AND SCORING MACHINE TYPE 7 "EURO 299.000,00 1 X METAL DETECTOR 7 "EURO 14.550,00 1 X DUST _ ABSORBING UNIT TYPE 7 "EURO 21.550,00 TOTAL PRICE EX WORKS ROHRBACH EURO 335.100,00 DELIVERY TIME: OSTEO. 4 MONTHS AFTER RECEIPT OF DOWN PAYMENT AND CLARIFICATION OF ALL TECHNICAL AND ECONOMICAL QUESTIONS TERMS OF DELIVERY: EX WORKS ROHRBACH, PACKING NOT INCLUDED ALL OTHER COSTS EXCLUDED PAYMENT TERMS: 50% DOWN PAYMENT WITH THE ORDER ON OUR BANC ACCOUNT 50% BALANCE PAYMENT ON OUR BANC ACCOUNT GERMAN PRODUCT, NO CHEAP GOODS FROM ASIA, NOT PURCHASED PARTS FROM ASIA, EVERYTHING "MADE IN GERMANY! WE OFFER THIS MACHINE WITH A WARRANTY OF 6 MONTHS IN SINGLE-SHIFT OPERATION FOR SALE. WE OFFER THIS MACHINE WITH WARRANTY 6 MONTHS AT 8HOURS WORKING EVERYDAY, (INCOTERMS EXW), WITHOUT PACKAGING
Vendedor: Peter Heidenreich Maschinenhandel
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 1590; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 1590; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-ppm chips plant 600 kg/hour

based on 21% solid content in potatoes and ideal process conditions.

all the equipments are manufactured on as per know-how from ppm ab, sweden as per their design, standards and technology.

all process equipments are fabricated in stainless steel, except for the, standard parts such as the motors, gear boxes and such components.

all electrical components, motors, modular plastic belts, hot oil pumps etc. are of international  brands.

design parameters

           capacity        :     out put                      -       1000 lbs/hr

potatoes        :     dry matter                 -       21 % (min)
                             reducing sugar         -      almost nil
                             size grade                 -       40 to 60 mm  

potato chips :     moisture content      -       1.5 % (max)
                             oil content                -      35 % approximately

            frying time  :     3 to 3.5 minutes 


process section - a:

infeed  elevator
 
the equipment shall receive the potatoes and feed the same to the de-stoner. 

to provide uniform & uninterrupted supply of potatoes to the production line.  the feed rate is controlled by variable speed motor, which controls the speed of elevator to lift the potatoes to the de-stoner.  

de-stoner
	
            for removing stones and elevating the product to the peeler. a high percentage of removal efficiency along with a certain amount of washing is achieved to assist better peeling.	


	page no. 9


continuous abrasive peeler			 
	
   used for continuous peeling of potatoes at variable speeds of operation.  adjustable levels of abrasive rolls for optimum peeling results accurately control the degree of peeling.  special roller design results in uniform peeling over the entire surface of potatoes.  

	easy replaceable abrasive rollers are driven via timing belts for smooth and silent running and low maintenance. used rollers can be recoated. 

		
   inspection conveyor		      
	
peeled potatoes to be inspected on a inspection conveyor.  the equipments also provide for trim station mounted on either side of table to facilitate trimming and disposal through waste chute. 

inclined elevator  
	
            inclined elevator with intermediate buffer hopper for regular and consistent flow of peeled potatoes. the elevator with flighted plastic belt  lifts potatoes  to the   singulator. 
		
   feeder singulator

potato singulator ensures regulated one by one feed of potatoes to the slicer. this ensures optimum capacity utilization of slicer and regulated slice feeding. 


   slicer 
		
		mechanical slicer from urschel, usa, with cutting heads for plain cut slices and matching with the line capacity, complete with the required stand in ss304 .
            
            urschel slicers are used all over the world in america or europe by most well established companies in potato chips making, including pepsico.
   


slice washer & shaker			
           
specially designed multistage washing on tumbler washer and final washing on vibratory conveyor, which effectively removes surface starch from freshly sliced potatoes and also eliminates small pieces from the finished product. 
            PPM CHIPS PLANT 600 KG/HOUR BASED ON 21% SOLID CONTENT IN POTATOES AND IDEAL PROCESS CONDITIONS. ALL THE EQUIPMENTS ARE MANUFACTURED ON AS PER KNOW-HOW FROM PPM AB, SWEDEN AS PER THEIR DESIGN, STANDARDS AND TECHNOLOGY. ALL PROCESS EQUIPMENTS ARE FABRICATED IN STAINLESS STEEL, EXCEPT FOR THE, STANDARD PARTS SUCH AS THE MOTORS, GEAR BOXES AND SUCH COMPONENTS. ALL ELECTRICAL COMPONENTS, MOTORS, MODULAR PLASTIC BELTS, HOT OIL PUMPS ETC. ARE OF INTERNATIONAL BRANDS. DESIGN PARAMETERS CAPACITY : OUT PUT - 1000 LBS/HR POTATOES : DRY MATTER - 21 % (MIN) REDUCING SUGAR - ALMOST NIL SIZE GRADE - 40 TO 60 MM POTATO CHIPS : MOISTURE CONTENT - 1.5 % (MAX) OIL CONTENT - 35 % APPROXIMATELY FRYING TIME : 3 TO 3.5 MINUTES PROCESS SECTION - A: INFEED ELEVATOR THE EQUIPMENT SHALL RECEIVE THE POTATOES AND FEED THE SAME TO THE DE-STONER. TO PROVIDE UNIFORM & UNINTERRUPTED SUPPLY OF POTATOES TO THE PRODUCTION LINE. THE FEED RATE IS CONTROLLED BY VARIABLE SPEED MOTOR, WHICH CONTROLS THE SPEED OF ELEVATOR TO LIFT THE POTATOES TO THE DE-STONER. DE-STONER FOR REMOVING STONES AND ELEVATING THE PRODUCT TO THE PEELER. A HIGH PERCENTAGE OF REMOVAL EFFICIENCY ALONG WITH A CERTAIN AMOUNT OF WASHING IS ACHIEVED TO ASSIST BETTER PEELING. PAGE NO. 9 CONTINUOUS ABRASIVE PEELER USED FOR CONTINUOUS PEELING OF POTATOES AT VARIABLE SPEEDS OF OPERATION. ADJUSTABLE LEVELS OF ABRASIVE ROLLS FOR OPTIMUM PEELING RESULTS ACCURATELY CONTROL THE DEGREE OF PEELING. SPECIAL ROLLER DESIGN RESULTS IN UNIFORM PEELING OVER THE ENTIRE SURFACE OF POTATOES. EASY REPLACEABLE ABRASIVE ROLLERS ARE DRIVEN VIA TIMING BELTS FOR SMOOTH AND SILENT RUNNING AND LOW MAINTENANCE. USED ROLLERS CAN BE RECOATED. INSPECTION CONVEYOR PEELED POTATOES TO BE INSPECTED ON A INSPECTION CONVEYOR. THE EQUIPMENTS ALSO PROVIDE FOR TRIM STATION MOUNTED ON EITHER SIDE OF TABLE TO FACILITATE TRIMMING AND DISPOSAL THROUGH WASTE CHUTE. INCLINED ELEVATOR INCLINED ELEVATOR WITH INTERMEDIATE BUFFER HOPPER FOR REGULAR AND CONSISTENT FLOW OF PEELED POTATOES. THE ELEVATOR WITH FLIGHTED PLASTIC BELT LIFTS POTATOES TO THE SINGULATOR. FEEDER SINGULATOR POTATO SINGULATOR ENSURES REGULATED ONE BY ONE FEED OF POTATOES TO THE SLICER. THIS ENSURES OPTIMUM CAPACITY UTILIZATION OF SLICER AND REGULATED SLICE FEEDING. SLICER MECHANICAL SLICER FROM URSCHEL, USA, WITH CUTTING HEADS FOR PLAIN CUT SLICES AND MATCHING WITH THE LINE CAPACITY, COMPLETE WITH THE REQUIRED STAND IN SS304 . URSCHEL SLICERS ARE USED ALL OVER THE WORLD IN AMERICA OR EUROPE BY MOST WELL ESTABLISHED COMPANIES IN POTATO CHIPS MAKING, INCLUDING PEPSICO. SLICE WASHER & SHAKER SPECIALLY DESIGNED MULTISTAGE WASHING ON TUMBLER WASHER AND FINAL WASHING ON VIBRATORY CONVEYOR, WHICH EFFECTIVELY REMOVES SURFACE STARCH FROM FRESHLY SLICED POTATOES AND ALSO ELIMINATES SMALL PIECES FROM THE FINISHED PRODUCT.
Vendedor: Crezta Food Equipment
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 1590; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 1590; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-year 2004 – high quality thermal ctp
on the platerite 4100 is specially designed for optimum versatility in producing plates for printing presses of 2 pages and 4 pages, even for new presses 4 format pages/6 pages of larger size. the platerite 4100 is an entry-level solution that can produce consistent and comfortably up to 10 plates per hour when working with slabs from 28.5 YEAR 2004 – HIGH QUALITY THERMAL CTP ON THE PLATERITE 4100 IS SPECIALLY DESIGNED FOR OPTIMUM VERSATILITY IN PRODUCING PLATES FOR PRINTING PRESSES OF 2 PAGES AND 4 PAGES, EVEN FOR NEW PRESSES 4 FORMAT PAGES/6 PAGES OF LARGER SIZE. THE PLATERITE 4100 IS AN ENTRY-LEVEL SOLUTION THAT CAN PRODUCE CONSISTENT AND COMFORTABLY UP TO 10 PLATES PER HOUR WHEN WORKING WITH SLABS FROM 28.5 "X 24.2" (724 MM X 615 MM) TO 2,400 DPI
Vendedor: Alcon SRL
Año de construcción: usado
Precio: 3.750 €
Ubicación: Land-; gross weight [kg]: 1335; maximum lift capacity [kg]: 270 ; GROSS WEIGHT [KG]: 1335; MAXIMUM LIFT CAPACITY [KG]: 270
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-technical data:

-nominal temperature / time temperature up to 420 â°
	-digital control for air - + heating elements
	-heating coil is located in the tank for optimum heating of the powder
	-drive 400 v / 4 kw
	-interior dimensions approx.	                     b 530 x h 640 x 390 mm
	-interior is made of stainless steel - space requirement approx.                            b h 670 x 1300 x 710 mm
	-weight approx.						  100 kg
 TECHNICAL DATA: -NOMINAL TEMPERATURE / TIME TEMPERATURE UP TO 420 &ACIRC;&DEG; -DIGITAL CONTROL FOR AIR - + HEATING ELEMENTS -HEATING COIL IS LOCATED IN THE TANK FOR OPTIMUM HEATING OF THE POWDER -DRIVE 400 V / 4 KW -INTERIOR DIMENSIONS APPROX. B 530 X H 640 X 390 MM -INTERIOR IS MADE OF STAINLESS STEEL - SPACE REQUIREMENT APPROX. B H 670 X 1300 X 710 MM -WEIGHT APPROX. 100 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 3.750 €
Ubicación: Land-; gross weight [kg]: 1335; rear tyres remaining: 80; front tyres remaining: 80; maximum lift capacity [kg]: 270 ; GROSS WEIGHT [KG]: 1335; REAR TYRES REMAINING: 80; FRONT TYRES REMAINING: 80; MAXIMUM LIFT CAPACITY [KG]: 270
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-center height: 210mm, center distance: 1000mm, swing over bed/ sledge/ in bed bridge: 420/ 250/ 590mm, turning length: 260mm, rotational speed: 45-1800/min, spindle cone: mk 6, spindle bore: 52mm, bed width: 250mm, length: 2025mm, width: 915mm, height: 1375mm, weight: 1.55t.  CENTER HEIGHT: 210MM, CENTER DISTANCE: 1000MM, SWING OVER BED/ SLEDGE/ IN BED BRIDGE: 420/ 250/ 590MM, TURNING LENGTH: 260MM, ROTATIONAL SPEED: 45-1800/MIN, SPINDLE CONE: MK 6, SPINDLE BORE: 52MM, BED WIDTH: 250MM, LENGTH: 2025MM, WIDTH: 915MM, HEIGHT: 1375MM, WEIGHT: 1.55T.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 4.500 €
Ubicación: Land-weight approx.: 800 kg<br/>dimensions (l x w x h) approx.: 2000x2100x2000 mm<br/>description: the machine was not used except for a few test runs. possible applications processing of wood and plastic materials production of moulded parts (prototype construction) series production by working with templates on the copying pen electronic measurement of all 4 movements with led display duplicating pencils double-sided, tool holder morse taper mk2 or collet clamping cross table on precision linear guide system (ball guided carriage and ball roller spindle) pivoting control panel ensures optimum operability projection (distance spindle centre - machine stand) 1000 mm cross table with t-slots 750x750 mm height adjustment 150 mm traverse path in x-axisdirection 1000 mm travel in y direction 800 mm motorised height adjustment of the table 150 mm pneumatic stroke of the milling support with 5 adjustable fixed stops 45° inclination of the milling head on both sides zero locking voltage 400v milling spindle drive with special three-phase motor 5 kw infinitely variable speed up to 24.000 rpm automatic brake (brake force regulator) suction nozzle diameter 100 mm WEIGHT APPROX.: 800 KG
DIMENSIONS (L X W X H) APPROX.: 2000X2100X2000 MM
DESCRIPTION: THE MACHINE WAS NOT USED EXCEPT FOR A FEW TEST RUNS. POSSIBLE APPLICATIONS PROCESSING OF WOOD AND PLASTIC MATERIALS PRODUCTION OF MOULDED PARTS (PROTOTYPE CONSTRUCTION) SERIES PRODUCTION BY WORKING WITH TEMPLATES ON THE COPYING PEN ELECTRONIC MEASUREMENT OF ALL 4 MOVEMENTS WITH LED DISPLAY DUPLICATING PENCILS DOUBLE-SIDED, TOOL HOLDER MORSE TAPER MK2 OR COLLET CLAMPING CROSS TABLE ON PRECISION LINEAR GUIDE SYSTEM (BALL GUIDED CARRIAGE AND BALL ROLLER SPINDLE) PIVOTING CONTROL PANEL ENSURES OPTIMUM OPERABILITY PROJECTION (DISTANCE SPINDLE CENTRE - MACHINE STAND) 1000 MM CROSS TABLE WITH T-SLOTS 750X750 MM HEIGHT ADJUSTMENT 150 MM TRAVERSE PATH IN X-AXISDIRECTION 1000 MM TRAVEL IN Y DIRECTION 800 MM MOTORISED HEIGHT ADJUSTMENT OF THE TABLE 150 MM PNEUMATIC STROKE OF THE MILLING SUPPORT WITH 5 ADJUSTABLE FIXED STOPS 45° INCLINATION OF THE MILLING HEAD ON BOTH SIDES ZERO LOCKING VOLTAGE 400V MILLING SPINDLE DRIVE WITH SPECIAL THREE-PHASE MOTOR 5 KW INFINITELY VARIABLE SPEED UP TO 24.000 RPM AUTOMATIC BRAKE (BRAKE FORCE REGULATOR) SUCTION NOZZLE DIAMETER 100 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.990 €
Ubicación: Land-
properties

segmented top and bending flange for various bending possibilities
    clamping by means of foot pedal, hands remain free for optimum positioning of the plate
    universal bending machine for sheet metal working and repairers
    robust construction in modern design
    manual bending machine for standard bending tasks
    segmented clamping beam for a large number of bending possibilities
    optimal price-performance ratio
    faster and easier bending operation via handle
    non-slip rubber coating on the foot pedal for safe working
    easy setting of the lower beam on the corresponding thickness
    high upper beam for the manufacture of highly bent profiles

optional accessories:

backgauge (art.nr.: 0) 6-6005)

technical specifications
working length
	
1260 mm
maximum sheet thickness
	
1.5 mm
maximum opening width
	
48 mm
bending angle
	
0-135 â°
width
	
1585 mm
depth
	
900 mm
height
	
1150 mm
weight approx.
	
310 kg PROPERTIES SEGMENTED TOP AND BENDING FLANGE FOR VARIOUS BENDING POSSIBILITIES CLAMPING BY MEANS OF FOOT PEDAL, HANDS REMAIN FREE FOR OPTIMUM POSITIONING OF THE PLATE UNIVERSAL BENDING MACHINE FOR SHEET METAL WORKING AND REPAIRERS ROBUST CONSTRUCTION IN MODERN DESIGN MANUAL BENDING MACHINE FOR STANDARD BENDING TASKS SEGMENTED CLAMPING BEAM FOR A LARGE NUMBER OF BENDING POSSIBILITIES OPTIMAL PRICE-PERFORMANCE RATIO FASTER AND EASIER BENDING OPERATION VIA HANDLE NON-SLIP RUBBER COATING ON THE FOOT PEDAL FOR SAFE WORKING EASY SETTING OF THE LOWER BEAM ON THE CORRESPONDING THICKNESS HIGH UPPER BEAM FOR THE MANUFACTURE OF HIGHLY BENT PROFILES OPTIONAL ACCESSORIES: BACKGAUGE (ART.NR.: 0) 6-6005) TECHNICAL SPECIFICATIONS WORKING LENGTH 1260 MM MAXIMUM SHEET THICKNESS 1.5 MM MAXIMUM OPENING WIDTH 48 MM BENDING ANGLE 0-135 &ACIRC;&DEG; WIDTH 1585 MM DEPTH 900 MM HEIGHT 1150 MM WEIGHT APPROX. 310 KG
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Precio: 19.400 €
Ubicación: Land-brushing machine\r\nbrand: langzauner\r\ntype: rbm-1500/4\r\nyear: 2007\r\n\r\nthe rbm-1500 is a powerful fully automatic cleaning machine for the back of 3d furniture fronts. the automatic size recognition of the furniture fronts makes it possible to adapt the machine to constantly changing loads without any loss of time in a continuous process. the glue residue on the backside is removed, thereby achieving optimum edge quality.\r\n\r\nthrough the use of a controlled brush unit (automatic height adjustment 15mm-38mm), the back of the 3d furniture front and the workpiece longitudinal edges are processed in one pass, thus achieving a processing speed of 2000 work pieces per 8 hours (rectangular parts).\r\nfurniture fronts of 15mm - 38mm thickness, are cleaned by the automatic height adjustment in the flow.\r\n\r\nthe machine is equipped with 5 pneumatically controlled brushing units.\r\nthe contact pressure is stepless adjustable. each brush unit has a disc brush with a Ø 260 mm and its own suction device (360°). the individual extractors are combined in the machine to form of a single suction connection Ø 250 mm.\r\n\r\nthe infeed conveyor belt is 3500 mm long. \r\n\r\nroller conveyor length: 3500 mm\r\nstepless speed control\r\nworking height: 900 mm +/- 25 mm\r\n\r\nproduction parameters:\r\nmin. front size: 180 x 90 x 15 mm\r\nmax. front size: 3000 x 650 x 38 mm\r\nfeed motor: 0.75 kw, feed rate: 2 - 12 m/min\r\nfront form: rectangular or square\r\n\r\n\r\nnote:\r\nthe technical data and descriptions are a copy of the then order confirmation. data are for information and are not binding. BRUSHING MACHINE\R\NBRAND: LANGZAUNER\R\NTYPE: RBM-1500/4\R\NYEAR: 2007\R\N\R\NTHE RBM-1500 IS A POWERFUL FULLY AUTOMATIC CLEANING MACHINE FOR THE BACK OF 3D FURNITURE FRONTS. THE AUTOMATIC SIZE RECOGNITION OF THE FURNITURE FRONTS MAKES IT POSSIBLE TO ADAPT THE MACHINE TO CONSTANTLY CHANGING LOADS WITHOUT ANY LOSS OF TIME IN A CONTINUOUS PROCESS. THE GLUE RESIDUE ON THE BACKSIDE IS REMOVED, THEREBY ACHIEVING OPTIMUM EDGE QUALITY.\R\N\R\NTHROUGH THE USE OF A CONTROLLED BRUSH UNIT (AUTOMATIC HEIGHT ADJUSTMENT 15MM-38MM), THE BACK OF THE 3D FURNITURE FRONT AND THE WORKPIECE LONGITUDINAL EDGES ARE PROCESSED IN ONE PASS, THUS ACHIEVING A PROCESSING SPEED OF 2000 WORK PIECES PER 8 HOURS (RECTANGULAR PARTS).\R\NFURNITURE FRONTS OF 15MM - 38MM THICKNESS, ARE CLEANED BY THE AUTOMATIC HEIGHT ADJUSTMENT IN THE FLOW.\R\N\R\NTHE MACHINE IS EQUIPPED WITH 5 PNEUMATICALLY CONTROLLED BRUSHING UNITS.\R\NTHE CONTACT PRESSURE IS STEPLESS ADJUSTABLE. EACH BRUSH UNIT HAS A DISC BRUSH WITH A Ø 260 MM AND ITS OWN SUCTION DEVICE (360°). THE INDIVIDUAL EXTRACTORS ARE COMBINED IN THE MACHINE TO FORM OF A SINGLE SUCTION CONNECTION Ø 250 MM.\R\N\R\NTHE INFEED CONVEYOR BELT IS 3500 MM LONG. \R\N\R\NROLLER CONVEYOR LENGTH: 3500 MM\R\NSTEPLESS SPEED CONTROL\R\NWORKING HEIGHT: 900 MM +/- 25 MM\R\N\R\NPRODUCTION PARAMETERS:\R\NMIN. FRONT SIZE: 180 X 90 X 15 MM\R\NMAX. FRONT SIZE: 3000 X 650 X 38 MM\R\NFEED MOTOR: 0.75 KW, FEED RATE: 2 - 12 M/MIN\R\NFRONT FORM: RECTANGULAR OR SQUARE\R\N\R\N\R\NNOTE:\R\NTHE TECHNICAL DATA AND DESCRIPTIONS ARE A COPY OF THE THEN ORDER CONFIRMATION. DATA ARE FOR INFORMATION AND ARE NOT BINDING.
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 1.800 €
Ubicación: Land-
properties

segmented top and bending flange for various bending possibilities
    clamping by means of foot pedal, hands remain free for optimum positioning of the plate
    universal bending machine for sheet metal working and repairers
    robust construction in modern design
    manual bending machine for standard bending tasks
    segmented clamping beam for a large number of bending possibilities
    optimal price-performance ratio
    faster and easier bending operation via handle
    non-slip rubber coating on the foot pedal for safe working
    easy setting of the lower beam on the corresponding thickness
    high upper beam for the manufacture of highly bent profiles

optional accessories:

backgauge (art.nr.: 0) 6-6000)

technical specifications
working length
	
1020 mm
maximum sheet thickness
	
2.0 mm
maximum opening width
	
48 mm
bending angle
	
0-135 â°
width
	
1350 mm
depth
	
820 mm
height
	
1140 mm
weight approx.
	
285 kg PROPERTIES SEGMENTED TOP AND BENDING FLANGE FOR VARIOUS BENDING POSSIBILITIES CLAMPING BY MEANS OF FOOT PEDAL, HANDS REMAIN FREE FOR OPTIMUM POSITIONING OF THE PLATE UNIVERSAL BENDING MACHINE FOR SHEET METAL WORKING AND REPAIRERS ROBUST CONSTRUCTION IN MODERN DESIGN MANUAL BENDING MACHINE FOR STANDARD BENDING TASKS SEGMENTED CLAMPING BEAM FOR A LARGE NUMBER OF BENDING POSSIBILITIES OPTIMAL PRICE-PERFORMANCE RATIO FASTER AND EASIER BENDING OPERATION VIA HANDLE NON-SLIP RUBBER COATING ON THE FOOT PEDAL FOR SAFE WORKING EASY SETTING OF THE LOWER BEAM ON THE CORRESPONDING THICKNESS HIGH UPPER BEAM FOR THE MANUFACTURE OF HIGHLY BENT PROFILES OPTIONAL ACCESSORIES: BACKGAUGE (ART.NR.: 0) 6-6000) TECHNICAL SPECIFICATIONS WORKING LENGTH 1020 MM MAXIMUM SHEET THICKNESS 2.0 MM MAXIMUM OPENING WIDTH 48 MM BENDING ANGLE 0-135 &ACIRC;&DEG; WIDTH 1350 MM DEPTH 820 MM HEIGHT 1140 MM WEIGHT APPROX. 285 KG
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Ubicación: Land-weight approx.: 3150 kg<br/>dimensions (l x w x h) approx.: 3650 x 1000 x 1300 mm<br/>description: center and turntable turning machine: - large 103mm spindle bore - high cutting performance, optimum cutting results - electromechanical spindle brake - sophisticated gear design for transmitting the engine power in high torques and strong cutting forces - tuned, stiff construction for the absorption of large cutting forces - tailstock construction with large radius for the machining of long waves - feed operation via one-hand lever technology with rapid traverse function delivery: 3-jaw chuck 315 mm, 4-jaw face chuck 400 mm, 1 piece running bezel, 1 piece standing bezel, 120-250 mm passage. turning diameter over bed 500 mm turning diameter over support 300 mm turning length 2000 mm turning diameter in the crank 710 mm speed ??36 - 1600 rpm top height 250 mm spindle bore 103 mm tailstock sleeve mount mk 5 mk tailstock stroke 150 mm tailstock quill diameter 75 mm total power requirement 7.5 kw machine weight approx. 3.15 t space required approx. 3.65 x 1.0 x 1.3 m WEIGHT APPROX.: 3150 KG
DIMENSIONS (L X W X H) APPROX.: 3650 X 1000 X 1300 MM
DESCRIPTION: CENTER AND TURNTABLE TURNING MACHINE: - LARGE 103MM SPINDLE BORE - HIGH CUTTING PERFORMANCE, OPTIMUM CUTTING RESULTS - ELECTROMECHANICAL SPINDLE BRAKE - SOPHISTICATED GEAR DESIGN FOR TRANSMITTING THE ENGINE POWER IN HIGH TORQUES AND STRONG CUTTING FORCES - TUNED, STIFF CONSTRUCTION FOR THE ABSORPTION OF LARGE CUTTING FORCES - TAILSTOCK CONSTRUCTION WITH LARGE RADIUS FOR THE MACHINING OF LONG WAVES - FEED OPERATION VIA ONE-HAND LEVER TECHNOLOGY WITH RAPID TRAVERSE FUNCTION DELIVERY: 3-JAW CHUCK 315 MM, 4-JAW FACE CHUCK 400 MM, 1 PIECE RUNNING BEZEL, 1 PIECE STANDING BEZEL, 120-250 MM PASSAGE. TURNING DIAMETER OVER BED 500 MM TURNING DIAMETER OVER SUPPORT 300 MM TURNING LENGTH 2000 MM TURNING DIAMETER IN THE CRANK 710 MM SPEED ??36 - 1600 RPM TOP HEIGHT 250 MM SPINDLE BORE 103 MM TAILSTOCK SLEEVE MOUNT MK 5 MK TAILSTOCK STROKE 150 MM TAILSTOCK QUILL DIAMETER 75 MM TOTAL POWER REQUIREMENT 7.5 KW MACHINE WEIGHT APPROX. 3.15 T SPACE REQUIRED APPROX. 3.65 X 1.0 X 1.3 M
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 310 €
Ubicación: Land-the vario - band saw ebs 85b suitable low weight for construction and repair activities. this machine for hollow sections, as well as for materials is predestined by the infinitely variable adjustment of the belt speed.

properties

a quiet, low-vibration running through the use of high quality materials
    stepless cutting speed for optimum adaptation to the work piece
    optimal schnitterbegnisse by ball bearing blade guide
    environmentally friendly, eliminating the use of lubricants and coolants
    optimal price-performance ratio through versatility
    powerful drive motor with good regulation characteristics
    for miter cuts the saw arm is swivelled
    including work piece stop for efficient working

scope of delivery

band saw blade
    workpiece stop
    infinitely variable belt speed
    ergonomic handle

technical specifications

cutting capacity 90 â° round
	

85 mm

90 â° flat section
	

85 x 105 mm

cutting area around 45â°
	

70 mm

section flat 45â°
	

55 x 70 mm

band saw blade dimensions
	

1325 x 13 x 0,65 mm

cutting speed, infinitely variable
	

30-80 m / min

engine performance
	

1.0 kw

voltage
	

230 v

machine dimensions (l x d x h)
	

700 x 320 x 430 mm

weight approx.
	

19 kg THE VARIO - BAND SAW EBS 85B SUITABLE LOW WEIGHT FOR CONSTRUCTION AND REPAIR ACTIVITIES. THIS MACHINE FOR HOLLOW SECTIONS, AS WELL AS FOR MATERIALS IS PREDESTINED BY THE INFINITELY VARIABLE ADJUSTMENT OF THE BELT SPEED. PROPERTIES A QUIET, LOW-VIBRATION RUNNING THROUGH THE USE OF HIGH QUALITY MATERIALS STEPLESS CUTTING SPEED FOR OPTIMUM ADAPTATION TO THE WORK PIECE OPTIMAL SCHNITTERBEGNISSE BY BALL BEARING BLADE GUIDE ENVIRONMENTALLY FRIENDLY, ELIMINATING THE USE OF LUBRICANTS AND COOLANTS OPTIMAL PRICE-PERFORMANCE RATIO THROUGH VERSATILITY POWERFUL DRIVE MOTOR WITH GOOD REGULATION CHARACTERISTICS FOR MITER CUTS THE SAW ARM IS SWIVELLED INCLUDING WORK PIECE STOP FOR EFFICIENT WORKING SCOPE OF DELIVERY BAND SAW BLADE WORKPIECE STOP INFINITELY VARIABLE BELT SPEED ERGONOMIC HANDLE TECHNICAL SPECIFICATIONS CUTTING CAPACITY 90 &ACIRC;&DEG; ROUND 85 MM 90 &ACIRC;&DEG; FLAT SECTION 85 X 105 MM CUTTING AREA AROUND 45&ACIRC;&DEG; 70 MM SECTION FLAT 45&ACIRC;&DEG; 55 X 70 MM BAND SAW BLADE DIMENSIONS 1325 X 13 X 0,65 MM CUTTING SPEED, INFINITELY VARIABLE 30-80 M / MIN ENGINE PERFORMANCE 1.0 KW VOLTAGE 230 V MACHINE DIMENSIONS (L X D X H) 700 X 320 X 430 MM WEIGHT APPROX. 19 KG
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Ubicación: Land-x-travel: 630 mm<br/>y-travel: 270 mm<br/>z-travel: 430 mm<br/>speeds: 40 - 1600 u/min<br/>table surface area: 430 mm<br/>payload: 350 kg<br/>spindle taper: 40 iso<br/>engine output: 2,2 kw<br/>voltage: 400 v<br/>transmission ratio: 11 stück<br/>weight of the machine ca.: 1350 kg<br/>dimensions of the machine ca.: 1655 x 1325 x 1730 mm<br/><br/><br/><br/><br/> X-TRAVEL: 630 MM
Y-TRAVEL: 270 MM
Z-TRAVEL: 430 MM
SPEEDS: 40 - 1600 U/MIN
TABLE SURFACE AREA: 430 MM
PAYLOAD: 350 KG
SPINDLE TAPER: 40 ISO
ENGINE OUTPUT: 2,2 KW
VOLTAGE: 400 V
TRANSMISSION RATIO: 11 STüCK
WEIGHT OF THE MACHINE CA.: 1350 KG
DIMENSIONS OF THE MACHINE CA.: 1655 X 1325 X 1730 MM




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Precio: 1.850 €
Ubicación: Land-the hbs model 275 pro is a precise horizontal band saw for universal use. features of this machine are the blade guide with tungsten carbide inserts and the integrated coolant system

properties

blade guide on combined roles baking guide system with tungsten carbide inserts
    professional band saws for general workshop use, fitters...
    for the cutting of hollow profiles and full materials, stainless steel, tool steel,...
    twist-free, heavily dimensioned saw frame made of spheroidal graphite cast iron
    adjustable hydraulic cylinders to the pad pressure regulation of the saw bar
    2 band saw speeds for optimum cutting results
    gearbox with hardened and ground auger and bronze worm wheel
    automatic shut-off after material average
    blade guide with quick adjustment to fit the width of the work piece ensures optimum working results

scope of delivery

band saw blade
    workpiece stop
    base
    belt tension gauge
    blade guide with tungsten carbide inserts
    vice with quick locking
    coolant system
    hydraulic lowering cylinder
    motor protection switch
    automatic shut-off

technical specifications

cutting capacity 90 â° round
	

225 mm

section square 90 â°
	

190 x 190 mm

90 â° flat section
	

245 x 150 mm

cutting area around 45â°
	

155 mm

section square 45 â°
	

155 x 155 mm

cutting area around 60 â°
	

90 mm

cutting range, square 60 â°
	

90 x 90 mm

working height
	

910 mm

band saw blade dimensions
	

2480 x 27 x 0,9 mm

cutting speed
	

45 / 90 m / min

coolant pump
	

100 w

s1 motor power output 100%
	

1,1 kw

motor power s6 40%
	

1.5 kw

voltage
	

400 v

machine dimensions (l x d x h)
	

1430 x 720 x 1700 mm

weight approx.
	

180 kg THE HBS MODEL 275 PRO IS A PRECISE HORIZONTAL BAND SAW FOR UNIVERSAL USE. FEATURES OF THIS MACHINE ARE THE BLADE GUIDE WITH TUNGSTEN CARBIDE INSERTS AND THE INTEGRATED COOLANT SYSTEM PROPERTIES BLADE GUIDE ON COMBINED ROLES BAKING GUIDE SYSTEM WITH TUNGSTEN CARBIDE INSERTS PROFESSIONAL BAND SAWS FOR GENERAL WORKSHOP USE, FITTERS... FOR THE CUTTING OF HOLLOW PROFILES AND FULL MATERIALS, STAINLESS STEEL, TOOL STEEL,... TWIST-FREE, HEAVILY DIMENSIONED SAW FRAME MADE OF SPHEROIDAL GRAPHITE CAST IRON ADJUSTABLE HYDRAULIC CYLINDERS TO THE PAD PRESSURE REGULATION OF THE SAW BAR 2 BAND SAW SPEEDS FOR OPTIMUM CUTTING RESULTS GEARBOX WITH HARDENED AND GROUND AUGER AND BRONZE WORM WHEEL AUTOMATIC SHUT-OFF AFTER MATERIAL AVERAGE BLADE GUIDE WITH QUICK ADJUSTMENT TO FIT THE WIDTH OF THE WORK PIECE ENSURES OPTIMUM WORKING RESULTS SCOPE OF DELIVERY BAND SAW BLADE WORKPIECE STOP BASE BELT TENSION GAUGE BLADE GUIDE WITH TUNGSTEN CARBIDE INSERTS VICE WITH QUICK LOCKING COOLANT SYSTEM HYDRAULIC LOWERING CYLINDER MOTOR PROTECTION SWITCH AUTOMATIC SHUT-OFF TECHNICAL SPECIFICATIONS CUTTING CAPACITY 90 &ACIRC;&DEG; ROUND 225 MM SECTION SQUARE 90 &ACIRC;&DEG; 190 X 190 MM 90 &ACIRC;&DEG; FLAT SECTION 245 X 150 MM CUTTING AREA AROUND 45&ACIRC;&DEG; 155 MM SECTION SQUARE 45 &ACIRC;&DEG; 155 X 155 MM CUTTING AREA AROUND 60 &ACIRC;&DEG; 90 MM CUTTING RANGE, SQUARE 60 &ACIRC;&DEG; 90 X 90 MM WORKING HEIGHT 910 MM BAND SAW BLADE DIMENSIONS 2480 X 27 X 0,9 MM CUTTING SPEED 45 / 90 M / MIN COOLANT PUMP 100 W S1 MOTOR POWER OUTPUT 100% 1,1 KW MOTOR POWER S6 40% 1.5 KW VOLTAGE 400 V MACHINE DIMENSIONS (L X D X H) 1430 X 720 X 1700 MM WEIGHT APPROX. 180 KG
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 1425; rear tyres remaining: 88; front tyres remaining: 89; inspection date: 2018; amount of previous owners: 1; lift height[mm]: 760; full service history: ja ; GROSS WEIGHT [KG]: 1425; REAR TYRES REMAINING: 88; FRONT TYRES REMAINING: 89; INSPECTION DATE: 2018; AMOUNT OF PREVIOUS OWNERS: 1; LIFT HEIGHT[MM]: 760; FULL SERVICE HISTORY: JA
Vendedor: Rothlehner Arbeitsbühnen GmbH
Año de construcción: usado
Precio: 2.300 €
Ubicación: Land-horizontal band sawing machine hbs 275 vario pro is as standard equipped with a variable speed, thus we enables optimal adaptation to a wide variety of materials. in addition is equipped this model with a blade guide with tungsten carbide inserts.

properties

blade guide on combined roles baking guide system with tungsten carbide inserts
    professional band saws for general workshop use, fitters...
    for the cutting of hollow profiles and full materials, stainless steel, tool steel,...
    twist-free, heavily dimensioned saw frame made of spheroidal graphite cast iron
    simple setting of the variable speed
    adjustable hydraulic cylinders to the pad pressure regulation of the saw bar
    gearbox with hardened and ground auger and bronze worm wheel
    automatic shut-off after material average
    blade guide with quick adjustment to fit the width of the work piece ensures optimum working results

scope of delivery

band saw blade
    workpiece stop
    base
    belt tension gauge
    blade guide with tungsten carbide inserts
    vice with quick locking
    coolant system
    hydraulic lowering cylinder
    motor protection switch
    automatic shut-off

technical specifications

cutting capacity 90 â° round
	

225 mm

section square 90 â°
	

200 x 200 mm

90 â° flat section
	

245 x 150 mm

cutting area around 45â°
	

160 mm

section square 45 â°
	

160 x 160 mm

cutting area around 60 â°
	

100 mm

cutting range, square 60 â°
	

100 mm

working height
	

910 mm

band saw blade dimensions
	

2480 x 27 x 0,9 mm

infinitely variable speeds
	

20-90 m / min

coolant pump
	

100 w

s1 motor power output 100%
	

1.5 kw

voltage
	

400 v

machine dimensions (l x d x h)
	

1430 x 720 x 1700 mm

weight approx.
	

185 kg
 HORIZONTAL BAND SAWING MACHINE HBS 275 VARIO PRO IS AS STANDARD EQUIPPED WITH A VARIABLE SPEED, THUS WE ENABLES OPTIMAL ADAPTATION TO A WIDE VARIETY OF MATERIALS. IN ADDITION IS EQUIPPED THIS MODEL WITH A BLADE GUIDE WITH TUNGSTEN CARBIDE INSERTS. PROPERTIES BLADE GUIDE ON COMBINED ROLES BAKING GUIDE SYSTEM WITH TUNGSTEN CARBIDE INSERTS PROFESSIONAL BAND SAWS FOR GENERAL WORKSHOP USE, FITTERS... FOR THE CUTTING OF HOLLOW PROFILES AND FULL MATERIALS, STAINLESS STEEL, TOOL STEEL,... TWIST-FREE, HEAVILY DIMENSIONED SAW FRAME MADE OF SPHEROIDAL GRAPHITE CAST IRON SIMPLE SETTING OF THE VARIABLE SPEED ADJUSTABLE HYDRAULIC CYLINDERS TO THE PAD PRESSURE REGULATION OF THE SAW BAR GEARBOX WITH HARDENED AND GROUND AUGER AND BRONZE WORM WHEEL AUTOMATIC SHUT-OFF AFTER MATERIAL AVERAGE BLADE GUIDE WITH QUICK ADJUSTMENT TO FIT THE WIDTH OF THE WORK PIECE ENSURES OPTIMUM WORKING RESULTS SCOPE OF DELIVERY BAND SAW BLADE WORKPIECE STOP BASE BELT TENSION GAUGE BLADE GUIDE WITH TUNGSTEN CARBIDE INSERTS VICE WITH QUICK LOCKING COOLANT SYSTEM HYDRAULIC LOWERING CYLINDER MOTOR PROTECTION SWITCH AUTOMATIC SHUT-OFF TECHNICAL SPECIFICATIONS CUTTING CAPACITY 90 &ACIRC;&DEG; ROUND 225 MM SECTION SQUARE 90 &ACIRC;&DEG; 200 X 200 MM 90 &ACIRC;&DEG; FLAT SECTION 245 X 150 MM CUTTING AREA AROUND 45&ACIRC;&DEG; 160 MM SECTION SQUARE 45 &ACIRC;&DEG; 160 X 160 MM CUTTING AREA AROUND 60 &ACIRC;&DEG; 100 MM CUTTING RANGE, SQUARE 60 &ACIRC;&DEG; 100 MM WORKING HEIGHT 910 MM BAND SAW BLADE DIMENSIONS 2480 X 27 X 0,9 MM INFINITELY VARIABLE SPEEDS 20-90 M / MIN COOLANT PUMP 100 W S1 MOTOR POWER OUTPUT 100% 1.5 KW VOLTAGE 400 V MACHINE DIMENSIONS (L X D X H) 1430 X 720 X 1700 MM WEIGHT APPROX. 185 KG
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 1425; rear tyres remaining: 87; front tyres remaining: 89; inspection date: 2018; amount of previous owners: 1; lift height[mm]: 560; maximum lift capacity [kg]: 230; full service history: ja ; GROSS WEIGHT [KG]: 1425; REAR TYRES REMAINING: 87; FRONT TYRES REMAINING: 89; INSPECTION DATE: 2018; AMOUNT OF PREVIOUS OWNERS: 1; LIFT HEIGHT[MM]: 560; MAXIMUM LIFT CAPACITY [KG]: 230; FULL SERVICE HISTORY: JA
Vendedor: Rothlehner Arbeitsbühnen GmbH
Año de construcción: usado
Precio: 3.400 €
Ubicación: Land-vertical band sawing machine vms 310 is suitable for cutting of almost all that material (e.g. plastic, non-ferrous metals, non-ferrous metals, steel,...). their range, this model is mainly in the general production, tool and fixture construction, in the production of stamping and cutting tools.

properties

massive cast iron table, is guaranteed a safe working through the large supporting surface
    standard with band welding equipment, sterilization equipment, scissors and grindstone
    standard with infinitely adjustable cutting speed
    machine body made of robust steel construction for smooth operation
    precision blade guide for optimum cutting results
    ideal for cutting intricate contours and shapes
    working table in all 4 directions 15 â° tiltable
    with compressor in the scope of delivery included blow gun
    for radius cutting saw blades from 3 mm width available

scope of delivery

band saw blade
    tape welding equipment sterilization device
    halogen light
    scissors
    grinding stone
    chip brush
    blow-out bulb

technical specifications

cutting width
	

310 mm

cutting height
	

175 mm

working height
	

890 mm

cutting speed level 1
	

20-90 m / min

blade length
	

2520 mm

saw band width
	

3-16 mm

table size
	

500 x 400 mm

table swivel range (in 4 directions)
	

15â°

engine performance
	

0.4 kw

sheet welding machine
	

2.4 kva

machine dimensions (l x d x h)
	

920 x 550 x 1680 mm

weight approx.
	

225 kg VERTICAL BAND SAWING MACHINE VMS 310 IS SUITABLE FOR CUTTING OF ALMOST ALL THAT MATERIAL (E.G. PLASTIC, NON-FERROUS METALS, NON-FERROUS METALS, STEEL,...). THEIR RANGE, THIS MODEL IS MAINLY IN THE GENERAL PRODUCTION, TOOL AND FIXTURE CONSTRUCTION, IN THE PRODUCTION OF STAMPING AND CUTTING TOOLS. PROPERTIES MASSIVE CAST IRON TABLE, IS GUARANTEED A SAFE WORKING THROUGH THE LARGE SUPPORTING SURFACE STANDARD WITH BAND WELDING EQUIPMENT, STERILIZATION EQUIPMENT, SCISSORS AND GRINDSTONE STANDARD WITH INFINITELY ADJUSTABLE CUTTING SPEED MACHINE BODY MADE OF ROBUST STEEL CONSTRUCTION FOR SMOOTH OPERATION PRECISION BLADE GUIDE FOR OPTIMUM CUTTING RESULTS IDEAL FOR CUTTING INTRICATE CONTOURS AND SHAPES WORKING TABLE IN ALL 4 DIRECTIONS 15 &ACIRC;&DEG; TILTABLE WITH COMPRESSOR IN THE SCOPE OF DELIVERY INCLUDED BLOW GUN FOR RADIUS CUTTING SAW BLADES FROM 3 MM WIDTH AVAILABLE SCOPE OF DELIVERY BAND SAW BLADE TAPE WELDING EQUIPMENT STERILIZATION DEVICE HALOGEN LIGHT SCISSORS GRINDING STONE CHIP BRUSH BLOW-OUT BULB TECHNICAL SPECIFICATIONS CUTTING WIDTH 310 MM CUTTING HEIGHT 175 MM WORKING HEIGHT 890 MM CUTTING SPEED LEVEL 1 20-90 M / MIN BLADE LENGTH 2520 MM SAW BAND WIDTH 3-16 MM TABLE SIZE 500 X 400 MM TABLE SWIVEL RANGE (IN 4 DIRECTIONS) 15&ACIRC;&DEG; ENGINE PERFORMANCE 0.4 KW SHEET WELDING MACHINE 2.4 KVA MACHINE DIMENSIONS (L X D X H) 920 X 550 X 1680 MM WEIGHT APPROX. 225 KG
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Ubicación: Land-x-travel:600 mm<br/>y-travel:400 mm<br/>z-travel:600 (900) mm<br/>total power requirement:13 kw<br/>weight of the machine ca.:3,5 t<br/>dimensions of the machine ca.:1730x3100x2800 m<br/><br/>used, immediately available vertical machining center. machine without repair jam, was replaced by new machine.   machine assemblies control unit heidenhain tnc 426 with digital drive control ü15 \ X-TRAVEL:600 MM
Y-TRAVEL:400 MM
Z-TRAVEL:600 (900) MM
TOTAL POWER REQUIREMENT:13 KW
WEIGHT OF THE MACHINE CA.:3,5 T
DIMENSIONS OF THE MACHINE CA.:1730X3100X2800 M

USED, IMMEDIATELY AVAILABLE VERTICAL MACHINING CENTER. MACHINE WITHOUT REPAIR JAM, WAS REPLACED BY NEW MACHINE. MACHINE ASSEMBLIES CONTROL UNIT HEIDENHAIN TNC 426 WITH DIGITAL DRIVE CONTROL ü15 \"COLOR SCREEN, CONTROL PANEL AND MACHINE CONTROL PANEL ü4-AXIS PLUS MAIN SPINDLE DRIVE ü128KB NC PROGRAM MEMORY (ABOUT 6000 NC BLOCKS) üLINEAR AND CIRCLE INTERPOLATION üSCREW LINE, 3D INTERPOLATION üSCREWS WITHOUT COMPENSATING CHUCK üRADIUS-CORRECTED CONTOUR UP TO 99 SETS IN ADVANCE üPARALLEL OPERATION (PROCESSING AND PROGRAMMING) üFILE MANAGEMENT FOR 64 NC PROGRAMS üPROGRAM INPUT IN THE HEIDENHAIN PLAIN TEXT AND IN ACCORDANCE WITH DIN / ISO üFREE CONTOUR PROGRAMMING IN THE HEIDENHAIN PLAIN TEXT WITH GRAPHICAL SUPPORT üNULL-POINT TABLE WITH 99 ZERO POINTS üBLOCKED TO TRANSFER LONG PROGRAMS üDATA INTERFACE V.24 / RS232-C MAX. 115 KBAUD MACHINE DESIGN STABLE STATOR IN CAST DESIGN, OPTIMAL DAMPING PROPERTIES, LOWER HEAT TRANSFER AND HIGH POSITIONING ACCURACY FORM THE BASIS FOR THE HIGH QUALITY STANDARDS. PROCESSING UNIT 600MM Z-AXIS TRAVEL, IDEAL FOR LARGE WORKPIECES AS WELL AS 4TH AND 5TH NC AXIS FEED DRIVE PRECISION BALL SCREWS WITH PRELOADED NUTS. AND SPINDLE DRIVES, DRIVEN BY HIGH-DYNAMIC AC SERVOMOTORS GUARANTEE POSITIONING AND REPEATABILITY. MAIN DRIVE HIGH TORQUE AT LOW SPEED AND HIGH SPEED RANGE WITH CONSTANT POWER. A HIGH-DYNAMIC AC MAIN DRIVE MOTOR, TOGETHER WITH A PRECISION SPINDLE DRIVE OF THE MAIN SPINDLE, FORM THE BASIS FOR OPTIMUM CUTTING VALUES ??AND HIGH SERVICE LIFE. ELECTRICAL EQUIPMENT - OPERATING VOLTAGE 400V / 50 HZ, CONTROL VOLTAGE 24 V DC, POWER SUPPLY VOLTAGE 220V / 50 HZ, POWER CONSUMPTION APPROX. 15 KVA, PROTECTION 25 A GG (INERT) - IN GENERAL, THE DRIVES USED REQUIRE A TN NETWORK! - THE MACHINE COMPLIES WITH THE EMC STANDARD 55011, LIMIT CLASS A FOR INDUSTRIAL NETWORKS, NOT FOR RESIDENTIAL AREAS! TECHNICAL SPECIFICATIONS WORKSPACE TRAVEL DISTANCE X-AXIS MM 600 TRAVEL Y-AXIS MM 400 TRAVEL Z AXIS MM 600 CUTTING CAPACITY MILLING CAPACITY IN ST 60 CM³ / MIN 350 DRILLING CAPACITY IN ST 60 (WP) MM 40 TAPPING PERFORMANCE IN ST 60 M24 WORKTABLE CLAMPING SURFACE / TABLE MM X MM 750X450 5 PIECES T-SLOTS ACCORDING TO DIN 650 IN X-DIRECTION (WIDTH / DISTANCE) MM 14X100 MEDIUM T-SLOT DESIGNED AS GUIDE GROOVE 14 H7 MAX. TABLE LOAD KG 500 FEED DRIVE SYSTEM AC SERVO ACTUATORS ADJUSTABLE / MAINTENANCE-FREE, DIGITAL EXP. RAPID TRAVERSE SPEED X, Y AND Z AXIS M / MIN 40/40/30 FEED FORCE IN THE X AND Y AXIS (40% ED) N 5000 FEED FORCE IN THE Z AXIS (40% ED) N 8000 WORK UNIT SPINDLE Ø IN FRONT BEARING MM 55 TOOL HOLDER ACCORDING TO DIN 69 871 SK 40 TIGHTENING BOLTS ACCORDING TO DIN 69 872-19 THREE-PHASE AC MOTOR CONTROLLABLE AND MAINTENANCE-FREE DRIVE POWER (40% ED) KW 13 SPEED ??RANGE INFINITELY M- 1 50-9000 MAX. PERMISSIBLE TORQUE (40% ED) AT THE SPINDLE NM 82 TOOL MAGAZINE MAGAZINE SLOTS 24 MAGAZINE TYPE PLATE MAX. TOOL DIA. WITH FULL ASSEMBLY MM 100 FOR FREE NEIGHBORING AREAS MM 200 MAX. TOOL LENGTH AT Ø25MM MM 350 MAX. TOOL WEIGHT KG 4 (6/10) TOOL CHANGE TIME APPROX. S 1,9 (3) CHIP-TO-CHIP TIME ACCORDING TO VDI S 3.9 (5) ACCURACY POSITIONING ACCURACY MM ±0,015 REPEATABILITY MM ±0,005 MASS MACHINE AS TRANSPORT UNIT KG 3500 MACHINE DIMENSIONS WIDTH MM 3100 DEPTH MM 1730 HEIGHT MM 2800 PAINTWORK DD STRUCTURE LACQUER GRAY / BLUE RAL 7035/5003 STANDARD ACCESSORIES ALZMETALL MACHINING CENTER, TYPE BAZ 15 CNC - AC SERVO MOTOR WITH INDIRECT DISTANCE MEASUREMENT - AUTOMATIC CENTRAL LUBRICATION - ELECTRICALLY SECURED PROTECTIVE COVER WITH TELESCOPIC PROTECTIVE SLIDING DOOR, OPENING 950MM - MACHINE FRAME AT THE BOTTOM WITH STEEL BLADE-FITTED BELLOWS, AT THE TOP WITH BELLOWS - COOLING DEVICE COMPLETE, TANK VOLUME 130L, PUMP CAPACITY 48L / MIN AT 1 BAR - LIGHTING THE WORK AREA SPECIAL ACCESSORIES ALZMETALL MACHINING CENTER, TYPE BAZ 15 CNC - HEIDENHAIN TRACK CONTROL TNC 426 - ELECTRONIC HANDWHEEL HR 410 - 3D TOUCH PROBE WITH INFRARED TRANSMISSION - COOLANT SUPPLY THROUGH THE TOOL CONSISTING OF: - TOOL CLAMPING - COOLANT HIGH PRESSURE PUMP DELIVERY CAPACITY 30L / MIN AT 16 BAR - COOLANT FINE-CLEANING BY MEANS OF HYDROCYCLONE - PREPARATION FOR COOLANT SUPPLY THROUGH THE MAIN SPINDLE AND BLOW-OUT DEVICE (WITHOUT COOLANT AND FINE-GRAINING) - RINSE FLUSH HOSE WITH SPRAY GUN, INCLUDING SEPARATE PUMP - CHIP CONVEYOR WITH COOLANT SYSTEM IN SCRATCH-RESISTANT DESIGN ARRANGEMENT ON THE FRONT OF THE MACHINE, BELOW THE COOLANT AND CHIP PAN COOLANT TANK INTEGRATED IN CHIP CONVEYOR, CAPACITY 48 L / MIN AT 1 BAR FOR TECHNICAL DATA AND DETAILS, PLEASE REFER TO THE APPENDIX.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 2.800 €
Ubicación: Land-the mbs model 280 dg is a precise horizontal band saw for universal use. the features of this machine are the swivelling saw bracket for double mitre cuts from - 45â° to + 60 â°, as well as a hydraulic cylinder to sensitive lower with control valve.

properties

twist-free, heavily dimensioned saw arm made of spheroidal graphite cast iron
    2 blade speed (45 / 90 m / min) for optimum cutting results
    blade guide roller with tungsten-carbide plates for optimal belt
    rugged construction, so quiet and vibration-free operation
    infinitely variable reduction of hydraulic cylinder
    gearbox with hardened and ground auger and bronze worm wheel
    vice from grey cast iron fence, ideal for serial cuts
    standard base with coolant system
    automatic shut-off after material average
    swivel saw bracket for double mitre cutting to the left (45 â°) and right (+ 60 â°)
    including pressure gauge to control of the optimal blade tension
technical specifications

cutting capacity round / square 90 â°
	

225 mm / 200 x 200 mm

90 â° flat section
	

245 x 180 mm

cutting capacity round / square 45 â° l
	

130 mm / 130 x 130 mm

section flat 45â° l
	

140 x 100 mm

cutting capacity round / square 45 â° r
	

150 mm / 150 x 150 mm

section flat 45â° r
	

145 x 215 mm

cutting capacity round / square 60 â° r
	

90 mm / 90 x 90 mm

section flat 60 â° r
	

90 x 110 mm

working height
	

950 mm

band saw blade dimensions
	

2480 x 27 x 0,9 mm

cutting speeds
	

45 / 90 m / min

coolant pump s1 100%
	

100 w

s1 motor power output 100%
	

1,1 kw

motor power s6 40%
	

1.5 kw

voltage
	

400 v

machine dimensions (l x d x h)
	

1750 x 1110 x 1900 mm

weight approx.
	

295 kg

THE MBS MODEL 280 DG IS A PRECISE HORIZONTAL BAND SAW FOR UNIVERSAL USE. THE FEATURES OF THIS MACHINE ARE THE SWIVELLING SAW BRACKET FOR DOUBLE MITRE CUTS FROM - 45&ACIRC;&DEG; TO + 60 &ACIRC;&DEG;, AS WELL AS A HYDRAULIC CYLINDER TO SENSITIVE LOWER WITH CONTROL VALVE. PROPERTIES TWIST-FREE, HEAVILY DIMENSIONED SAW ARM MADE OF SPHEROIDAL GRAPHITE CAST IRON 2 BLADE SPEED (45 / 90 M / MIN) FOR OPTIMUM CUTTING RESULTS BLADE GUIDE ROLLER WITH TUNGSTEN-CARBIDE PLATES FOR OPTIMAL BELT RUGGED CONSTRUCTION, SO QUIET AND VIBRATION-FREE OPERATION INFINITELY VARIABLE REDUCTION OF HYDRAULIC CYLINDER GEARBOX WITH HARDENED AND GROUND AUGER AND BRONZE WORM WHEEL VICE FROM GREY CAST IRON FENCE, IDEAL FOR SERIAL CUTS STANDARD BASE WITH COOLANT SYSTEM AUTOMATIC SHUT-OFF AFTER MATERIAL AVERAGE SWIVEL SAW BRACKET FOR DOUBLE MITRE CUTTING TO THE LEFT (45 &ACIRC;&DEG;) AND RIGHT (+ 60 &ACIRC;&DEG;) INCLUDING PRESSURE GAUGE TO CONTROL OF THE OPTIMAL BLADE TENSION TECHNICAL SPECIFICATIONS CUTTING CAPACITY ROUND / SQUARE 90 &ACIRC;&DEG; 225 MM / 200 X 200 MM 90 &ACIRC;&DEG; FLAT SECTION 245 X 180 MM CUTTING CAPACITY ROUND / SQUARE 45 &ACIRC;&DEG; L 130 MM / 130 X 130 MM SECTION FLAT 45&ACIRC;&DEG; L 140 X 100 MM CUTTING CAPACITY ROUND / SQUARE 45 &ACIRC;&DEG; R 150 MM / 150 X 150 MM SECTION FLAT 45&ACIRC;&DEG; R 145 X 215 MM CUTTING CAPACITY ROUND / SQUARE 60 &ACIRC;&DEG; R 90 MM / 90 X 90 MM SECTION FLAT 60 &ACIRC;&DEG; R 90 X 110 MM WORKING HEIGHT 950 MM BAND SAW BLADE DIMENSIONS 2480 X 27 X 0,9 MM CUTTING SPEEDS 45 / 90 M / MIN COOLANT PUMP S1 100% 100 W S1 MOTOR POWER OUTPUT 100% 1,1 KW MOTOR POWER S6 40% 1.5 KW VOLTAGE 400 V MACHINE DIMENSIONS (L X D X H) 1750 X 1110 X 1900 MM WEIGHT APPROX. 295 KG
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Ubicación: Land-turning diameter:360 mm<br/>turning length:750 mm<br/>control:siemens 828 + shopturn <br/>turning diameter over bed slide:300 mm<br/>max. swing over slide:190 mm<br/>bed width:250 mm<br/>spindle taper:a2-5 <br/>spindle speeds:0-4000 1/min.<br/>spindle bore:42 mm<br/>tailstock quill diameter:58 mm<br/>tailstock quill stroke:180 mm<br/>taper of tailstock quill:4 mk<br/>max. length of work piece:750 mm<br/>rapid traverse x/z:15/12 m/min<br/>power requirement:7,5 kw<br/>weight of the machine ca.:1200 kg<br/>dimensions of the machine ca.:2250x1115x1630 mm<br/>automatic tool changer:8-fach <br/>chip conveyor: <br/>cnc controller:siemens 828 + shopturn <br/>ce-design: <br/>3 jaw chuck Ø:180 mm<br/>tools:1 satz <br/>machine work light: <br/>coolant system: <br/>automatic lubrication system: <br/>european electric: <br/>electric handwheel: <br/>servo spindle motor: <br/>machine semi-cover: <br/>: <br/>dead center: <br/><br/>factory-new cnc cycle lathe with cnc control fanuc 0i tf  characteristics: powerful, flexible and productive with an optimal price / performance ratio for the growing requirements of turning shops, toolmakers and other mechanical plants as well as training centers      * the economical solution with modern fanuc 0i tf and a variety of processing cycles     * powerful drive thanks to powerful motors and stepless spindle speed for efficient machining     * 8-way multi-tool turret with driven tools for high degree of automation     * induction-hardened guideways and turcite-b coatings reduce friction and increase service life     * moveable and ergonomically shaped control panel for optimum handling     * electronic handwheel for easy manual operation and positioning     * automatic central lubrication     * large spindle opening of 42mm   illustration similar  for fixed lump sums, we also offer free delivery, including assembly, commissioning, instruction of the operating personnel as well as ready to hand over the machine. service, spare parts supply, the subsequent supply of accessories is also guaranteed by us.  warranty: 12 months on parts  benefit from the favorable leasing and hire-purchase conditions of abc leasing: ask us for it. TURNING DIAMETER:360 MM
TURNING LENGTH:750 MM
CONTROL:SIEMENS 828 + SHOPTURN
TURNING DIAMETER OVER BED SLIDE:300 MM
MAX. SWING OVER SLIDE:190 MM
BED WIDTH:250 MM
SPINDLE TAPER:A2-5
SPINDLE SPEEDS:0-4000 1/MIN.
SPINDLE BORE:42 MM
TAILSTOCK QUILL DIAMETER:58 MM
TAILSTOCK QUILL STROKE:180 MM
TAPER OF TAILSTOCK QUILL:4 MK
MAX. LENGTH OF WORK PIECE:750 MM
RAPID TRAVERSE X/Z:15/12 M/MIN
POWER REQUIREMENT:7,5 KW
WEIGHT OF THE MACHINE CA.:1200 KG
DIMENSIONS OF THE MACHINE CA.:2250X1115X1630 MM
AUTOMATIC TOOL CHANGER:8-FACH
CHIP CONVEYOR:
CNC CONTROLLER:SIEMENS 828 + SHOPTURN
CE-DESIGN:
3 JAW CHUCK Ø:180 MM
TOOLS:1 SATZ
MACHINE WORK LIGHT:
COOLANT SYSTEM:
AUTOMATIC LUBRICATION SYSTEM:
EUROPEAN ELECTRIC:
ELECTRIC HANDWHEEL:
SERVO SPINDLE MOTOR:
MACHINE SEMI-COVER:
:
DEAD CENTER:

FACTORY-NEW CNC CYCLE LATHE WITH CNC CONTROL FANUC 0I TF CHARACTERISTICS: POWERFUL, FLEXIBLE AND PRODUCTIVE WITH AN OPTIMAL PRICE / PERFORMANCE RATIO FOR THE GROWING REQUIREMENTS OF TURNING SHOPS, TOOLMAKERS AND OTHER MECHANICAL PLANTS AS WELL AS TRAINING CENTERS * THE ECONOMICAL SOLUTION WITH MODERN FANUC 0I TF AND A VARIETY OF PROCESSING CYCLES * POWERFUL DRIVE THANKS TO POWERFUL MOTORS AND STEPLESS SPINDLE SPEED FOR EFFICIENT MACHINING * 8-WAY MULTI-TOOL TURRET WITH DRIVEN TOOLS FOR HIGH DEGREE OF AUTOMATION * INDUCTION-HARDENED GUIDEWAYS AND TURCITE-B COATINGS REDUCE FRICTION AND INCREASE SERVICE LIFE * MOVEABLE AND ERGONOMICALLY SHAPED CONTROL PANEL FOR OPTIMUM HANDLING * ELECTRONIC HANDWHEEL FOR EASY MANUAL OPERATION AND POSITIONING * AUTOMATIC CENTRAL LUBRICATION * LARGE SPINDLE OPENING OF 42MM ILLUSTRATION SIMILAR FOR FIXED LUMP SUMS, WE ALSO OFFER FREE DELIVERY, INCLUDING ASSEMBLY, COMMISSIONING, INSTRUCTION OF THE OPERATING PERSONNEL AS WELL AS READY TO HAND OVER THE MACHINE. SERVICE, SPARE PARTS SUPPLY, THE SUBSEQUENT SUPPLY OF ACCESSORIES IS ALSO GUARANTEED BY US. WARRANTY: 12 MONTHS ON PARTS BENEFIT FROM THE FAVORABLE LEASING AND HIRE-PURCHASE CONDITIONS OF ABC LEASING: ASK US FOR IT.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 3.430 €
Ubicación: Land-cutting capacity round / square 90â°: 255 mm / 210 x 210 mm
90â° flat cutting area: 310 x 210 mm
cutting capacity round / square 45 â° r: 220 mm / 210 x 210 mm
section flat 45 â° r: 220 x 200 mm
cutting capacity round / square 45 â° l: 230 mm / 200 x 200 mm
cutting capacity 45 â° l: flat 230 x 200 mm
cutting capacity round / square 60 â° r: 135 mm / 135 x 135 mm
section flat 60 â° r: 135 x 135 mm
working height: 930 mm
band saw blade dimensions: 2750 x 27 x 0,9 mm
cutting speed: 35 / 70 m / min
coolant pump: 100 w
s1 motor power output 100%: 1.5 kw
motor power s6 40%: 2.2 kw
voltage: 400 v
machine dimensions (l x d x h): 2000 x 1250 x 1900 mm
approximate weight: 350 kg

features:
-professional band saw for general workshop use, fitters...
-for cutting of hollow profiles and full materials, stainless steel, tool steel,...
-twist-free, heavily dimensioned saw frame made of spheroidal graphite cast iron
-2 speeds for optimum cutting results in a variety of materials
-adjustable hydraulic cylinders to the pad pressure regulation of the saw bar
-swivel sawing ironing double mitre cutting to the left (45 â°) and right (+ 60 â°)
-a quiet, low-vibration running through the use of high quality materials
-vice made of cast iron with quick lock
blade guide with quick adjustment to fit the width of the work piece ensures optimum working results

scope of delivery:
-band saw blade
-work piece stop
-base
-the belt tension gauge
-blade guide with tungsten carbide inserts
-quick clamping vice
-coolant system
-hydraulic lowering cylinder
-motor protection switch
-automatic shut-off

price includes delivery within (without islands) germany. CUTTING CAPACITY ROUND / SQUARE 90&ACIRC;&DEG;: 255 MM / 210 X 210 MM 90&ACIRC;&DEG; FLAT CUTTING AREA: 310 X 210 MM CUTTING CAPACITY ROUND / SQUARE 45 &ACIRC;&DEG; R: 220 MM / 210 X 210 MM SECTION FLAT 45 &ACIRC;&DEG; R: 220 X 200 MM CUTTING CAPACITY ROUND / SQUARE 45 &ACIRC;&DEG; L: 230 MM / 200 X 200 MM CUTTING CAPACITY 45 &ACIRC;&DEG; L: FLAT 230 X 200 MM CUTTING CAPACITY ROUND / SQUARE 60 &ACIRC;&DEG; R: 135 MM / 135 X 135 MM SECTION FLAT 60 &ACIRC;&DEG; R: 135 X 135 MM WORKING HEIGHT: 930 MM BAND SAW BLADE DIMENSIONS: 2750 X 27 X 0,9 MM CUTTING SPEED: 35 / 70 M / MIN COOLANT PUMP: 100 W S1 MOTOR POWER OUTPUT 100%: 1.5 KW MOTOR POWER S6 40%: 2.2 KW VOLTAGE: 400 V MACHINE DIMENSIONS (L X D X H): 2000 X 1250 X 1900 MM APPROXIMATE WEIGHT: 350 KG FEATURES: -PROFESSIONAL BAND SAW FOR GENERAL WORKSHOP USE, FITTERS... -FOR CUTTING OF HOLLOW PROFILES AND FULL MATERIALS, STAINLESS STEEL, TOOL STEEL,... -TWIST-FREE, HEAVILY DIMENSIONED SAW FRAME MADE OF SPHEROIDAL GRAPHITE CAST IRON -2 SPEEDS FOR OPTIMUM CUTTING RESULTS IN A VARIETY OF MATERIALS -ADJUSTABLE HYDRAULIC CYLINDERS TO THE PAD PRESSURE REGULATION OF THE SAW BAR -SWIVEL SAWING IRONING DOUBLE MITRE CUTTING TO THE LEFT (45 &ACIRC;&DEG;) AND RIGHT (+ 60 &ACIRC;&DEG;) -A QUIET, LOW-VIBRATION RUNNING THROUGH THE USE OF HIGH QUALITY MATERIALS -VICE MADE OF CAST IRON WITH QUICK LOCK BLADE GUIDE WITH QUICK ADJUSTMENT TO FIT THE WIDTH OF THE WORK PIECE ENSURES OPTIMUM WORKING RESULTS SCOPE OF DELIVERY: -BAND SAW BLADE -WORK PIECE STOP -BASE -THE BELT TENSION GAUGE -BLADE GUIDE WITH TUNGSTEN CARBIDE INSERTS -QUICK CLAMPING VICE -COOLANT SYSTEM -HYDRAULIC LOWERING CYLINDER -MOTOR PROTECTION SWITCH -AUTOMATIC SHUT-OFF PRICE INCLUDES DELIVERY WITHIN (WITHOUT ISLANDS) GERMANY.
Vendedor: Weber Werkzeugmaschinen GbR
Año de construcción: usado
Ubicación: Land-:ss-27 | ss-31 | ss-35 <br/>turning diameter:700|790|890 mm<br/>turning length:700/1200/1700/2200/3200/4200/5200 mm<br/>control:siemens 828d <br/>spindle nose:a2-11/a2-15/a2-20/a2-28/a2-32 <br/>spindle bore:153/230/255/318/360/410/535/610 mm<br/>spindle speeds:20-1200/16-700/13-600/14-450/12-400/10-350/8-300/4-220 1/min<br/>speed steps work spindle:4-stufig (automatisch schaltend) <br/>cross feed:0,001~250 mm/min<br/>feed in z-axis:0,001~400 mm/min<br/>rapid travel - longitudinal/face:8/10 m/min<br/>dia of ball screw:45 mm in x-achse / 60 mm in z-achse <br/>tool turret:10- oder 12-fach <br/>tool taper:vdi 40/50 oder schaftaufnahme <br/>tool holder -shaft diameter:32x32 mm<br/>diameter tailstock quill:160 mm<br/>:200 mm<br/>tailstock quill taper mt:5 <br/>spindle drive:30/37 (37/45 opt.) kw<br/>servo motor x-axis:3,8 kw<br/>servo motor z-axis:3,8 kw<br/>weight of the machine ca.:11t für spitzenweite 700mm (weitere 500mm: 1,5t) t<br/>cnc controller:siemens/fanuc/fagor <br/>: <br/>chip conveyor: <br/>ce-design: <br/>: <br/>scales: <br/>fully enclosed: <br/>workshop light: <br/>central lubrication: <br/>coolant system: <br/>spindle oil cooler: <br/>levellig elements: <br/>heat exchanger: <br/>c-axis: <br/>y-axis: <br/>steady rests:manuell und hydraulisch <br/>boring bar holder: <br/>tool measuring system: <br/>counter spindle: <br/>hydr. chuck and tailstock sleeve: <br/><br/>solid slant bed esures the lathe´s accuracy stability even in the situation of heavy cutting. wide span rectangle sliding guides possess strong ability of anti-bending, anti-twisting and anti-overturning. applied abrasion-proof material of low friction coefficient and cooperated with the optimum positioning accuracy even in rapid feeding. straight line rolling guides meet the requirements of high speed and high efficiency, reduce friction resistance and thermal deformation, improve machining accuracy and ensure long period stability of machining accuracy. due to fact that servomotors of x-axis and z-axis are connected directly with precision ball screws through can be obtained elastic coupling and obtained high precision. :SS-27 | SS-31 | SS-35
TURNING DIAMETER:700|790|890 MM
TURNING LENGTH:700/1200/1700/2200/3200/4200/5200 MM
CONTROL:SIEMENS 828D
SPINDLE NOSE:A2-11/A2-15/A2-20/A2-28/A2-32
SPINDLE BORE:153/230/255/318/360/410/535/610 MM
SPINDLE SPEEDS:20-1200/16-700/13-600/14-450/12-400/10-350/8-300/4-220 1/MIN
SPEED STEPS WORK SPINDLE:4-STUFIG (AUTOMATISCH SCHALTEND)
CROSS FEED:0,001~250 MM/MIN
FEED IN Z-AXIS:0,001~400 MM/MIN
RAPID TRAVEL - LONGITUDINAL/FACE:8/10 M/MIN
DIA OF BALL SCREW:45 MM IN X-ACHSE / 60 MM IN Z-ACHSE
TOOL TURRET:10- ODER 12-FACH
TOOL TAPER:VDI 40/50 ODER SCHAFTAUFNAHME
TOOL HOLDER -SHAFT DIAMETER:32X32 MM
DIAMETER TAILSTOCK QUILL:160 MM
:200 MM
TAILSTOCK QUILL TAPER MT:5
SPINDLE DRIVE:30/37 (37/45 OPT.) KW
SERVO MOTOR X-AXIS:3,8 KW
SERVO MOTOR Z-AXIS:3,8 KW
WEIGHT OF THE MACHINE CA.:11T FüR SPITZENWEITE 700MM (WEITERE 500MM: 1,5T) T
CNC CONTROLLER:SIEMENS/FANUC/FAGOR
:
CHIP CONVEYOR:
CE-DESIGN:
:
SCALES:
FULLY ENCLOSED:
WORKSHOP LIGHT:
CENTRAL LUBRICATION:
COOLANT SYSTEM:
SPINDLE OIL COOLER:
LEVELLIG ELEMENTS:
HEAT EXCHANGER:
C-AXIS:
Y-AXIS:
STEADY RESTS:MANUELL UND HYDRAULISCH
BORING BAR HOLDER:
TOOL MEASURING SYSTEM:
COUNTER SPINDLE:
HYDR. CHUCK AND TAILSTOCK SLEEVE:

SOLID SLANT BED ESURES THE LATHE´S ACCURACY STABILITY EVEN IN THE SITUATION OF HEAVY CUTTING. WIDE SPAN RECTANGLE SLIDING GUIDES POSSESS STRONG ABILITY OF ANTI-BENDING, ANTI-TWISTING AND ANTI-OVERTURNING. APPLIED ABRASION-PROOF MATERIAL OF LOW FRICTION COEFFICIENT AND COOPERATED WITH THE OPTIMUM POSITIONING ACCURACY EVEN IN RAPID FEEDING. STRAIGHT LINE ROLLING GUIDES MEET THE REQUIREMENTS OF HIGH SPEED AND HIGH EFFICIENCY, REDUCE FRICTION RESISTANCE AND THERMAL DEFORMATION, IMPROVE MACHINING ACCURACY AND ENSURE LONG PERIOD STABILITY OF MACHINING ACCURACY. DUE TO FACT THAT SERVOMOTORS OF X-AXIS AND Z-AXIS ARE CONNECTED DIRECTLY WITH PRECISION BALL SCREWS THROUGH CAN BE OBTAINED ELASTIC COUPLING AND OBTAINED HIGH PRECISION.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 1.850 €
Ubicación: Land-
description

for the cutting of hollow profiles and full materials, stainless steel, tool steel,...
    twist-free, heavily dimensioned saw frame made of grey cast iron
    2 band saw speeds (35 / 70 m / min) for optimum cutting results of adjustable hydraulic cylinders to the pad pressure regulation of the saw bar
    swivel saw bracket for double mitre cutting to the left (45 â°) and right (+ 60 â°)
    a quiet, low-vibration running through the use of high quality materials
    vice from grey cast iron fence, ideal for serial cuts
    blade guide with quick adjustment to fit the width of the work piece ensures optimum working results
    rugged construction, so quiet and vibration-free operation

scope of delivery

band saw blade
    workpiece stop
    base
    belt tension gauge
    vice with quick locking
    coolant system
    hydraulic lowering cylinder
    motor protection switch
    automatic shut-off
    automatic belt breakage detection

technical specifications

cutting capacity 90 â° round
	

240 mm

section square 90 â°
	

225 x 225 mm

90 â° flat section
	

310 x 180 mm

cutting area around 45â°
	

200 mm

section square 45 â°
	

180 x 180 mm

cutting area around 60 â°
	

140 mm

cutting range, square 60 â°
	

140 x 140 mm

working height
	

950 mm

band saw blade dimensions
	

2680 x 27 x 0,9 mm

cutting speeds
	

35 / 70 m / min

coolant pump
	

45 w

s1 motor power output 100%
	

1,1 / 1,5 kw

motor power s6 40%
	

1.5 / 2.2 kw

voltage
	

400 v

machine dimensions (l x d x h)
	

1550 x 870 x 1490 mm

weight approx.
	

313 kg DESCRIPTION FOR THE CUTTING OF HOLLOW PROFILES AND FULL MATERIALS, STAINLESS STEEL, TOOL STEEL,... TWIST-FREE, HEAVILY DIMENSIONED SAW FRAME MADE OF GREY CAST IRON 2 BAND SAW SPEEDS (35 / 70 M / MIN) FOR OPTIMUM CUTTING RESULTS OF ADJUSTABLE HYDRAULIC CYLINDERS TO THE PAD PRESSURE REGULATION OF THE SAW BAR SWIVEL SAW BRACKET FOR DOUBLE MITRE CUTTING TO THE LEFT (45 &ACIRC;&DEG;) AND RIGHT (+ 60 &ACIRC;&DEG;) A QUIET, LOW-VIBRATION RUNNING THROUGH THE USE OF HIGH QUALITY MATERIALS VICE FROM GREY CAST IRON FENCE, IDEAL FOR SERIAL CUTS BLADE GUIDE WITH QUICK ADJUSTMENT TO FIT THE WIDTH OF THE WORK PIECE ENSURES OPTIMUM WORKING RESULTS RUGGED CONSTRUCTION, SO QUIET AND VIBRATION-FREE OPERATION SCOPE OF DELIVERY BAND SAW BLADE WORKPIECE STOP BASE BELT TENSION GAUGE VICE WITH QUICK LOCKING COOLANT SYSTEM HYDRAULIC LOWERING CYLINDER MOTOR PROTECTION SWITCH AUTOMATIC SHUT-OFF AUTOMATIC BELT BREAKAGE DETECTION TECHNICAL SPECIFICATIONS CUTTING CAPACITY 90 &ACIRC;&DEG; ROUND 240 MM SECTION SQUARE 90 &ACIRC;&DEG; 225 X 225 MM 90 &ACIRC;&DEG; FLAT SECTION 310 X 180 MM CUTTING AREA AROUND 45&ACIRC;&DEG; 200 MM SECTION SQUARE 45 &ACIRC;&DEG; 180 X 180 MM CUTTING AREA AROUND 60 &ACIRC;&DEG; 140 MM CUTTING RANGE, SQUARE 60 &ACIRC;&DEG; 140 X 140 MM WORKING HEIGHT 950 MM BAND SAW BLADE DIMENSIONS 2680 X 27 X 0,9 MM CUTTING SPEEDS 35 / 70 M / MIN COOLANT PUMP 45 W S1 MOTOR POWER OUTPUT 100% 1,1 / 1,5 KW MOTOR POWER S6 40% 1.5 / 2.2 KW VOLTAGE 400 V MACHINE DIMENSIONS (L X D X H) 1550 X 870 X 1490 MM WEIGHT APPROX. 313 KG
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Ubicación: Land-:sa-35 | sa-40 | sa-45 <br/>turning diameter:890|1020|1145 mm<br/>turning length:700/1200/1700/2200/3200/4200/5200 mm<br/>control:siemens 828d <br/>spindle nose:a2-11/a2-15/a2-20/a2-28/a2-32 <br/>spindle bore:153/230/255/318/360/410/535/610 mm<br/>spindle speeds:20-1200/16-700/13-600/14-450/12-400/10-350/8-300/4-220 1/min<br/>rapid travel - longitudinal/face:8/10 m/min<br/>cross feed:0,001~250 mm/min.<br/>feed in z-axis:0,001~400 mm/min<br/>dia of ball screw:50 mm in x-achse / 80 mm in z-achse <br/>tool turret:10-/12-fach <br/>tool taper:vdi 40/50 oder schaft <br/>tool holder -shaft diameter:32x32 mm<br/>diameter tailstock quill:235 mm<br/>:200 mm<br/>tailstock quill taper mt:6 <br/>spindle drive:37/45 (50/60 opt.) kw<br/>servo motor x-axis:4,5 (6 opt.) <br/>servo motor z-axis:4,5 (6 opt.) kw<br/>weight of the machine ca.:16,5t für spitzenweite 700mm (weitere 500mm: 2,2t) t<br/>cnc controller:siemens/fanuc/fagor <br/>central lubrication: <br/>workshop light: <br/>coolant system: <br/>: <br/>chip conveyor: <br/>levellig elements: <br/>air conditioner for cabinet: <br/>technical documentation in german language: <br/>ce-design: <br/>: <br/>scales: <br/>fully enclosed: <br/>c-axis: <br/>y-axis: <br/>steady rests:manuell und hydraulisch <br/>boring bar holder: <br/>tool measuring system: <br/>counter spindle: <br/>hydr. chuck and tailstock sleeve: <br/><br/>solid slant bed esures the lathe´s accuracy stability even in the situation of heavy cutting. wide span rectangle sliding guides possess strong ability of anti-bending, anti-twisting and anti-overturning. applied abrasion-proof material of low friction coefficient and cooperated with the optimum positioning accuracy even in rapid feeding. straight line rolling guides meet the requirements of high speed and high efficiency, reduce friction resistance and thermal deformation, improve machining accuracy and ensure long period stability of machining accuracy. due to fact that servomotors of x-axis and z-axis are connected directly with precision ball screws through can be obtained elastic coupling and obtained high precision. :SA-35 | SA-40 | SA-45
TURNING DIAMETER:890|1020|1145 MM
TURNING LENGTH:700/1200/1700/2200/3200/4200/5200 MM
CONTROL:SIEMENS 828D
SPINDLE NOSE:A2-11/A2-15/A2-20/A2-28/A2-32
SPINDLE BORE:153/230/255/318/360/410/535/610 MM
SPINDLE SPEEDS:20-1200/16-700/13-600/14-450/12-400/10-350/8-300/4-220 1/MIN
RAPID TRAVEL - LONGITUDINAL/FACE:8/10 M/MIN
CROSS FEED:0,001~250 MM/MIN.
FEED IN Z-AXIS:0,001~400 MM/MIN
DIA OF BALL SCREW:50 MM IN X-ACHSE / 80 MM IN Z-ACHSE
TOOL TURRET:10-/12-FACH
TOOL TAPER:VDI 40/50 ODER SCHAFT
TOOL HOLDER -SHAFT DIAMETER:32X32 MM
DIAMETER TAILSTOCK QUILL:235 MM
:200 MM
TAILSTOCK QUILL TAPER MT:6
SPINDLE DRIVE:37/45 (50/60 OPT.) KW
SERVO MOTOR X-AXIS:4,5 (6 OPT.)
SERVO MOTOR Z-AXIS:4,5 (6 OPT.) KW
WEIGHT OF THE MACHINE CA.:16,5T FüR SPITZENWEITE 700MM (WEITERE 500MM: 2,2T) T
CNC CONTROLLER:SIEMENS/FANUC/FAGOR
CENTRAL LUBRICATION:
WORKSHOP LIGHT:
COOLANT SYSTEM:
:
CHIP CONVEYOR:
LEVELLIG ELEMENTS:
AIR CONDITIONER FOR CABINET:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
CE-DESIGN:
:
SCALES:
FULLY ENCLOSED:
C-AXIS:
Y-AXIS:
STEADY RESTS:MANUELL UND HYDRAULISCH
BORING BAR HOLDER:
TOOL MEASURING SYSTEM:
COUNTER SPINDLE:
HYDR. CHUCK AND TAILSTOCK SLEEVE:

SOLID SLANT BED ESURES THE LATHE´S ACCURACY STABILITY EVEN IN THE SITUATION OF HEAVY CUTTING. WIDE SPAN RECTANGLE SLIDING GUIDES POSSESS STRONG ABILITY OF ANTI-BENDING, ANTI-TWISTING AND ANTI-OVERTURNING. APPLIED ABRASION-PROOF MATERIAL OF LOW FRICTION COEFFICIENT AND COOPERATED WITH THE OPTIMUM POSITIONING ACCURACY EVEN IN RAPID FEEDING. STRAIGHT LINE ROLLING GUIDES MEET THE REQUIREMENTS OF HIGH SPEED AND HIGH EFFICIENCY, REDUCE FRICTION RESISTANCE AND THERMAL DEFORMATION, IMPROVE MACHINING ACCURACY AND ENSURE LONG PERIOD STABILITY OF MACHINING ACCURACY. DUE TO FACT THAT SERVOMOTORS OF X-AXIS AND Z-AXIS ARE CONNECTED DIRECTLY WITH PRECISION BALL SCREWS THROUGH CAN BE OBTAINED ELASTIC COUPLING AND OBTAINED HIGH PRECISION.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 800 €
Ubicación: Land-
description

for the cutting of profiles, tubes, solid materials,...
    quick clamping vice for bevel cuts up to 45 â° adjustable
    double ball bearing blade guide for optimal belt
    print run of the saw bar by means of adjustable valve
    automatic band saw cut end
    placed in the machine body including coolant system, space-saving
    quiet and low-vibration operation for optimum cutting results
    twist-free, heavily dimensioned saw arm cast
    including work piece stop for efficient working

scope of delivery

band saw blade
    coolant system
    workpiece stop
    quick clamping vice
    mobile machine base
    motor protection switch
    hydraulic lowering cylinder
    separate emergency stop button to ce

technical specifications

cutting capacity 90 â° round
	

180 mm

90 â° flat section
	

180 x 210 mm

cutting area around 45â°
	

90 mm

section flat 45â°
	

140 x 80 mm

working height
	

550 mm

band saw blade dimensions
	

2360 x 20 x 0,9 mm

cutting speeds
	

21 / 34 / 46 / 56 m / min

coolant reservoir
	

9 litres

coolant pump
	

25 w

s1 motor power output 100%
	

0,75 kw

motor power s6 40%
	

1,1 kw

voltage
	

400 v

machine dimensions (l x d x h)
	

1250 x 520 x 1000 mm

weight approx.
	

130 kg DESCRIPTION FOR THE CUTTING OF PROFILES, TUBES, SOLID MATERIALS,... QUICK CLAMPING VICE FOR BEVEL CUTS UP TO 45 &ACIRC;&DEG; ADJUSTABLE DOUBLE BALL BEARING BLADE GUIDE FOR OPTIMAL BELT PRINT RUN OF THE SAW BAR BY MEANS OF ADJUSTABLE VALVE AUTOMATIC BAND SAW CUT END PLACED IN THE MACHINE BODY INCLUDING COOLANT SYSTEM, SPACE-SAVING QUIET AND LOW-VIBRATION OPERATION FOR OPTIMUM CUTTING RESULTS TWIST-FREE, HEAVILY DIMENSIONED SAW ARM CAST INCLUDING WORK PIECE STOP FOR EFFICIENT WORKING SCOPE OF DELIVERY BAND SAW BLADE COOLANT SYSTEM WORKPIECE STOP QUICK CLAMPING VICE MOBILE MACHINE BASE MOTOR PROTECTION SWITCH HYDRAULIC LOWERING CYLINDER SEPARATE EMERGENCY STOP BUTTON TO CE TECHNICAL SPECIFICATIONS CUTTING CAPACITY 90 &ACIRC;&DEG; ROUND 180 MM 90 &ACIRC;&DEG; FLAT SECTION 180 X 210 MM CUTTING AREA AROUND 45&ACIRC;&DEG; 90 MM SECTION FLAT 45&ACIRC;&DEG; 140 X 80 MM WORKING HEIGHT 550 MM BAND SAW BLADE DIMENSIONS 2360 X 20 X 0,9 MM CUTTING SPEEDS 21 / 34 / 46 / 56 M / MIN COOLANT RESERVOIR 9 LITRES COOLANT PUMP 25 W S1 MOTOR POWER OUTPUT 100% 0,75 KW MOTOR POWER S6 40% 1,1 KW VOLTAGE 400 V MACHINE DIMENSIONS (L X D X H) 1250 X 520 X 1000 MM WEIGHT APPROX. 130 KG
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Ubicación: Land-turning diameter:360 mm<br/>turning length:1000 mm<br/>control:fanuc 0i tf <br/>turning diameter over bed slide:300 mm<br/>max. swing over slide:190 mm<br/>bed width:250 mm<br/>spindle taper:a2-5 <br/>spindle speeds:0-4000 1/min.<br/>spindle bore:42 mm<br/>tailstock quill diameter:58 mm<br/>tailstock quill stroke:180 mm<br/>taper of tailstock quill:4 mk<br/>max. length of work piece:1000 mm<br/>rapid traverse x/z:15/12 m/min<br/>power requirement:7,5 kw<br/>weight of the machine ca.:1200 kg<br/>dimensions of the machine ca.:2500x1115x1630 mm<br/>automatic tool changer:4-fach <br/>cnc controller:fanuc 0i td <br/>ce-design: <br/>tools:1 satz <br/>machine work light: <br/>coolant system: <br/>automatic lubrication system: <br/>european electric: <br/>electric handwheel: <br/>servo spindle motor: <br/>machine semi-cover: <br/>: <br/>chip pan: <br/>dead center: <br/><br/>factory-new cnc cycle lathe with cnc control fanuc 0i tf  characteristics: powerful, flexible and productive with an optimal price / performance ratio for the growing requirements of turning shops, toolmakers and other mechanical plants as well as training centers      * the economical solution with modern fanuc 0i tf and a variety of processing cycles     * powerful drive thanks to powerful motors and stepless spindle speed for efficient machining     * 8-way multi-tool turret with driven tools for high degree of automation     * induction-hardened guideways and turcite-b coatings reduce friction and increase service life     * moveable and ergonomically shaped control panel for optimum handling     * electronic handwheel for easy manual operation and positioning     * automatic central lubrication     * large spindle opening of 42mm   illustration similar  for fixed lump sums, we also offer free delivery, including assembly, commissioning, instruction of the operating personnel as well as ready to hand over the machine. service, spare parts supply, the subsequent supply of accessories is also guaranteed by us.  warranty: 12 months on parts  benefit from the favorable leasing and hire-purchase conditions of abc leasing: ask us for it. TURNING DIAMETER:360 MM
TURNING LENGTH:1000 MM
CONTROL:FANUC 0I TF
TURNING DIAMETER OVER BED SLIDE:300 MM
MAX. SWING OVER SLIDE:190 MM
BED WIDTH:250 MM
SPINDLE TAPER:A2-5
SPINDLE SPEEDS:0-4000 1/MIN.
SPINDLE BORE:42 MM
TAILSTOCK QUILL DIAMETER:58 MM
TAILSTOCK QUILL STROKE:180 MM
TAPER OF TAILSTOCK QUILL:4 MK
MAX. LENGTH OF WORK PIECE:1000 MM
RAPID TRAVERSE X/Z:15/12 M/MIN
POWER REQUIREMENT:7,5 KW
WEIGHT OF THE MACHINE CA.:1200 KG
DIMENSIONS OF THE MACHINE CA.:2500X1115X1630 MM
AUTOMATIC TOOL CHANGER:4-FACH
CNC CONTROLLER:FANUC 0I TD
CE-DESIGN:
TOOLS:1 SATZ
MACHINE WORK LIGHT:
COOLANT SYSTEM:
AUTOMATIC LUBRICATION SYSTEM:
EUROPEAN ELECTRIC:
ELECTRIC HANDWHEEL:
SERVO SPINDLE MOTOR:
MACHINE SEMI-COVER:
:
CHIP PAN:
DEAD CENTER:

FACTORY-NEW CNC CYCLE LATHE WITH CNC CONTROL FANUC 0I TF CHARACTERISTICS: POWERFUL, FLEXIBLE AND PRODUCTIVE WITH AN OPTIMAL PRICE / PERFORMANCE RATIO FOR THE GROWING REQUIREMENTS OF TURNING SHOPS, TOOLMAKERS AND OTHER MECHANICAL PLANTS AS WELL AS TRAINING CENTERS * THE ECONOMICAL SOLUTION WITH MODERN FANUC 0I TF AND A VARIETY OF PROCESSING CYCLES * POWERFUL DRIVE THANKS TO POWERFUL MOTORS AND STEPLESS SPINDLE SPEED FOR EFFICIENT MACHINING * 8-WAY MULTI-TOOL TURRET WITH DRIVEN TOOLS FOR HIGH DEGREE OF AUTOMATION * INDUCTION-HARDENED GUIDEWAYS AND TURCITE-B COATINGS REDUCE FRICTION AND INCREASE SERVICE LIFE * MOVEABLE AND ERGONOMICALLY SHAPED CONTROL PANEL FOR OPTIMUM HANDLING * ELECTRONIC HANDWHEEL FOR EASY MANUAL OPERATION AND POSITIONING * AUTOMATIC CENTRAL LUBRICATION * LARGE SPINDLE OPENING OF 42MM ILLUSTRATION SIMILAR FOR FIXED LUMP SUMS, WE ALSO OFFER FREE DELIVERY, INCLUDING ASSEMBLY, COMMISSIONING, INSTRUCTION OF THE OPERATING PERSONNEL AS WELL AS READY TO HAND OVER THE MACHINE. SERVICE, SPARE PARTS SUPPLY, THE SUBSEQUENT SUPPLY OF ACCESSORIES IS ALSO GUARANTEED BY US. WARRANTY: 12 MONTHS ON PARTS BENEFIT FROM THE FAVORABLE LEASING AND HIRE-PURCHASE CONDITIONS OF ABC LEASING: ASK US FOR IT.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 65.700 €
Ubicación: Land-aim663 advanced industrial
multi sensor 3d-cnckoordinatenmesszentrum
aim koordinatenmesszentren are
technical successor to the world in the
use the mahr multisensor
coordinate measuring machines. the modular
and at any time on - and can be retrofitted
device technology ensures a
maximum flexibility, universality
and technical progress. aim
koordinatenmesszentren are based on
jahrzehntelanger metrological and
constructive experience and include
technologically leading
devices around the world.

technical data:
measuring range: 600 x 600 x 300 mm
dimensions: 1520 x 1040 x 2040 mm
weight: approx. 1.200 kg
maximum workpiece weight: on glass plate approx. 40 kg
accuracy: u1 = 1.9 + l/200
               u2 = 2,4 + l/150
               u3 = 2.9 + l/100 (l = measuring length in mm)
increased accuracy on request
travel speed: 200 mm / s
acceleration: 400 mm / s
scale resolution: 0.0001 mm

multi sensor-sensorikeinheit (msh) optical/tactile/laser
consisting of modular profitech multi sensor head
high-quality, high-performance components of our own production and
development. all sensory systems are specific to request with future
and existing developments, such as line laser or cws
(chromatic white light sensor), modularly extendable.

including highly accurate usb camera with 2-step zoom with telecentric
beam path
incl. ptl01 ttl point laser, high-precision, tele-centric coupled
tactile probe system integrated with renishaw tp200, optionally expandable
including quad-light led light power ring light, programmable
incl. led power light, programmable
incl. nikon precision lens 5 x (optionally 3 x, 10 x, 20 x, 50 x) c-mount
technology
incl. calibration standard with factory calibration certificate, consisting of glass plate
"circle", calibration ball and ring gauge

cnc machine control/controller system
newly developed controller technology based the well-known mahr
multisensor series, with optimized components such as e.g. powerboard
backplane bus-lp, servo amplifiers, frame grabbers, etc.)
state of the art pt200 cnc controller system in solid industrial-strength
control cabinet
pci bus quick internal data transfer in real time operating system
pull-out controller rack 19 "for optimal access during servicing
modular controller concept open to subsequent construction and retrofits
service optimized controller setup quick access and service times
integrated 64-bit broadband-bus technology with real time data transfer
4-channel online temperature compensation preparation "on board"
active safety technology for drives, lighting and sensors
online-remote connection for remote maintenance and online system check
ls circuit breaker for rapid troubleshooting in the event of servicing
firmware adaptation for volumetric 3d-vollfehlerkompensation

pc from value station on industry standard on windows 7 ultimate
incl. control panel integration for space-saving design of the system
including dual-view 2-monitor operation as an optimum work environment
incl. 2 x tft 24 "brand monitor resolution
incl. 2 x lan network connection to company networks remotely services
incl. softwaredongle safenet
including software training documentation and manual
incl. manual opticheck3d
incl. acronis true image backup software
including mouse-keyboard combination

opticheck3d system software version 4.5
opticheck3d is one of the best and most efficient in the world
software solutions. opticheck3d offers a unique stable and comprehensive
software environment, an equally easy and quickly
learning, free, customizable user interface, as well as a free
programmable system environment to solve individual and
offers the most complex measuring tasks.

software opticheck3d 4.5 base version large
applications and programmable system environment
including statistics online module for evaluation in the serienmessbetrieb
incl. os stat interface transfer measurements on parent
systems

including dxf import and export interface
including preparation for renishaw scanning probe systems and key exchange
including excel interface to export data in the windows environment
visualiserte incl. option display of measurement results
including predefined measurement protocol creation with numerous options
incl. option editor for fast and secure program correction
excel test result plots individualized including predefined
including language and system settings multinational
measurement processes automated incl. option series/range measurement
incl. online user help per feature / per step
more details and features in the opticheck3d data sheets and
system description available

powerful software tools support the user in the fast
implementation of simple and complex measuring tasks. the open and free
programmable system environment of opticheck3d are the
realization of complex measuring tasks virtually no limits. the logical
design of the comprehensive program features allows a quick and
fault-redundant implementation of all measuring tasks.
more product details, please refer to our data sheets. AIM663 ADVANCED INDUSTRIAL MULTI SENSOR 3D-CNCKOORDINATENMESSZENTRUM AIM KOORDINATENMESSZENTREN ARE TECHNICAL SUCCESSOR TO THE WORLD IN THE USE THE MAHR MULTISENSOR COORDINATE MEASURING MACHINES. THE MODULAR AND AT ANY TIME ON - AND CAN BE RETROFITTED DEVICE TECHNOLOGY ENSURES A MAXIMUM FLEXIBILITY, UNIVERSALITY AND TECHNICAL PROGRESS. AIM KOORDINATENMESSZENTREN ARE BASED ON JAHRZEHNTELANGER METROLOGICAL AND CONSTRUCTIVE EXPERIENCE AND INCLUDE TECHNOLOGICALLY LEADING DEVICES AROUND THE WORLD. TECHNICAL DATA: MEASURING RANGE: 600 X 600 X 300 MM DIMENSIONS: 1520 X 1040 X 2040 MM WEIGHT: APPROX. 1.200 KG MAXIMUM WORKPIECE WEIGHT: ON GLASS PLATE APPROX. 40 KG ACCURACY: U1 = 1.9 + L/200 U2 = 2,4 + L/150 U3 = 2.9 + L/100 (L = MEASURING LENGTH IN MM) INCREASED ACCURACY ON REQUEST TRAVEL SPEED: 200 MM / S ACCELERATION: 400 MM / S SCALE RESOLUTION: 0.0001 MM MULTI SENSOR-SENSORIKEINHEIT (MSH) OPTICAL/TACTILE/LASER CONSISTING OF MODULAR PROFITECH MULTI SENSOR HEAD HIGH-QUALITY, HIGH-PERFORMANCE COMPONENTS OF OUR OWN PRODUCTION AND DEVELOPMENT. ALL SENSORY SYSTEMS ARE SPECIFIC TO REQUEST WITH FUTURE AND EXISTING DEVELOPMENTS, SUCH AS LINE LASER OR CWS (CHROMATIC WHITE LIGHT SENSOR), MODULARLY EXTENDABLE. INCLUDING HIGHLY ACCURATE USB CAMERA WITH 2-STEP ZOOM WITH TELECENTRIC BEAM PATH INCL. PTL01 TTL POINT LASER, HIGH-PRECISION, TELE-CENTRIC COUPLED TACTILE PROBE SYSTEM INTEGRATED WITH RENISHAW TP200, OPTIONALLY EXPANDABLE INCLUDING QUAD-LIGHT LED LIGHT POWER RING LIGHT, PROGRAMMABLE INCL. LED POWER LIGHT, PROGRAMMABLE INCL. NIKON PRECISION LENS 5 X (OPTIONALLY 3 X, 10 X, 20 X, 50 X) C-MOUNT TECHNOLOGY INCL. CALIBRATION STANDARD WITH FACTORY CALIBRATION CERTIFICATE, CONSISTING OF GLASS PLATE "CIRCLE", CALIBRATION BALL AND RING GAUGE CNC MACHINE CONTROL/CONTROLLER SYSTEM NEWLY DEVELOPED CONTROLLER TECHNOLOGY BASED THE WELL-KNOWN MAHR MULTISENSOR SERIES, WITH OPTIMIZED COMPONENTS SUCH AS E.G. POWERBOARD BACKPLANE BUS-LP, SERVO AMPLIFIERS, FRAME GRABBERS, ETC.) STATE OF THE ART PT200 CNC CONTROLLER SYSTEM IN SOLID INDUSTRIAL-STRENGTH CONTROL CABINET PCI BUS QUICK INTERNAL DATA TRANSFER IN REAL TIME OPERATING SYSTEM PULL-OUT CONTROLLER RACK 19 "FOR OPTIMAL ACCESS DURING SERVICING MODULAR CONTROLLER CONCEPT OPEN TO SUBSEQUENT CONSTRUCTION AND RETROFITS SERVICE OPTIMIZED CONTROLLER SETUP QUICK ACCESS AND SERVICE TIMES INTEGRATED 64-BIT BROADBAND-BUS TECHNOLOGY WITH REAL TIME DATA TRANSFER 4-CHANNEL ONLINE TEMPERATURE COMPENSATION PREPARATION "ON BOARD" ACTIVE SAFETY TECHNOLOGY FOR DRIVES, LIGHTING AND SENSORS ONLINE-REMOTE CONNECTION FOR REMOTE MAINTENANCE AND ONLINE SYSTEM CHECK LS CIRCUIT BREAKER FOR RAPID TROUBLESHOOTING IN THE EVENT OF SERVICING FIRMWARE ADAPTATION FOR VOLUMETRIC 3D-VOLLFEHLERKOMPENSATION PC FROM VALUE STATION ON INDUSTRY STANDARD ON WINDOWS 7 ULTIMATE INCL. CONTROL PANEL INTEGRATION FOR SPACE-SAVING DESIGN OF THE SYSTEM INCLUDING DUAL-VIEW 2-MONITOR OPERATION AS AN OPTIMUM WORK ENVIRONMENT INCL. 2 X TFT 24 "BRAND MONITOR RESOLUTION INCL. 2 X LAN NETWORK CONNECTION TO COMPANY NETWORKS REMOTELY SERVICES INCL. SOFTWAREDONGLE SAFENET INCLUDING SOFTWARE TRAINING DOCUMENTATION AND MANUAL INCL. MANUAL OPTICHECK3D INCL. ACRONIS TRUE IMAGE BACKUP SOFTWARE INCLUDING MOUSE-KEYBOARD COMBINATION OPTICHECK3D SYSTEM SOFTWARE VERSION 4.5 OPTICHECK3D IS ONE OF THE BEST AND MOST EFFICIENT IN THE WORLD SOFTWARE SOLUTIONS. OPTICHECK3D OFFERS A UNIQUE STABLE AND COMPREHENSIVE SOFTWARE ENVIRONMENT, AN EQUALLY EASY AND QUICKLY LEARNING, FREE, CUSTOMIZABLE USER INTERFACE, AS WELL AS A FREE PROGRAMMABLE SYSTEM ENVIRONMENT TO SOLVE INDIVIDUAL AND OFFERS THE MOST COMPLEX MEASURING TASKS. SOFTWARE OPTICHECK3D 4.5 BASE VERSION LARGE APPLICATIONS AND PROGRAMMABLE SYSTEM ENVIRONMENT INCLUDING STATISTICS ONLINE MODULE FOR EVALUATION IN THE SERIENMESSBETRIEB INCL. OS STAT INTERFACE TRANSFER MEASUREMENTS ON PARENT SYSTEMS INCLUDING DXF IMPORT AND EXPORT INTERFACE INCLUDING PREPARATION FOR RENISHAW SCANNING PROBE SYSTEMS AND KEY EXCHANGE INCLUDING EXCEL INTERFACE TO EXPORT DATA IN THE WINDOWS ENVIRONMENT VISUALISERTE INCL. OPTION DISPLAY OF MEASUREMENT RESULTS INCLUDING PREDEFINED MEASUREMENT PROTOCOL CREATION WITH NUMEROUS OPTIONS INCL. OPTION EDITOR FOR FAST AND SECURE PROGRAM CORRECTION EXCEL TEST RESULT PLOTS INDIVIDUALIZED INCLUDING PREDEFINED INCLUDING LANGUAGE AND SYSTEM SETTINGS MULTINATIONAL MEASUREMENT PROCESSES AUTOMATED INCL. OPTION SERIES/RANGE MEASUREMENT INCL. ONLINE USER HELP PER FEATURE / PER STEP MORE DETAILS AND FEATURES IN THE OPTICHECK3D DATA SHEETS AND SYSTEM DESCRIPTION AVAILABLE POWERFUL SOFTWARE TOOLS SUPPORT THE USER IN THE FAST IMPLEMENTATION OF SIMPLE AND COMPLEX MEASURING TASKS. THE OPEN AND FREE PROGRAMMABLE SYSTEM ENVIRONMENT OF OPTICHECK3D ARE THE REALIZATION OF COMPLEX MEASURING TASKS VIRTUALLY NO LIMITS. THE LOGICAL DESIGN OF THE COMPREHENSIVE PROGRAM FEATURES ALLOWS A QUICK AND FAULT-REDUNDANT IMPLEMENTATION OF ALL MEASURING TASKS. MORE PRODUCT DETAILS, PLEASE REFER TO OUR DATA SHEETS.
Vendedor: Profitech Technologies GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 500 mm<br/>turning diameter over slide rest: 300 mm<br/>turning length: 2000 mm<br/>turning diameter in the gap: 710 mm<br/>turning speeds: 36 - 1600 u/min<br/>centre height: 250 mm<br/>spindle bore: 103 mm<br/>tailstock quill taper mt: 5 mk<br/>tailstock travel: 150 mm<br/>tailstock quill diameter: 75 mm<br/>total power requirement: 7,5 kw<br/>weight of the machine ca.: 3,15 t<br/>dimensions of the machine ca.: 3,65 x 1,0 x 1,3 m<br/>highlights<br/>  - large 103mm spindle bore<br/>  - high cutting performance, optimum cutting results<br/>  - electromechanical spindle brake<br/>  - sophisticated gear design for transmitting the engine power in high<br/>    torques and strong cutting forces<br/>  - tuned, stiff construction for the absorption of large cutting forces<br/>  - tailstock construction with large radius for the machining of long waves<br/>  - feed operation via one-hand lever technology with rapid traverse function<br/>delivery:<br/>3-jaw chuck 315 mm, 4-jaw face chuck 400 mm, 1 piece<br/>running bezel, 1 piece standing bezel, 120-250 mm passage.<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 500 MM
TURNING DIAMETER OVER SLIDE REST: 300 MM
TURNING LENGTH: 2000 MM
TURNING DIAMETER IN THE GAP: 710 MM
TURNING SPEEDS: 36 - 1600 U/MIN
CENTRE HEIGHT: 250 MM
SPINDLE BORE: 103 MM
TAILSTOCK QUILL TAPER MT: 5 MK
TAILSTOCK TRAVEL: 150 MM
TAILSTOCK QUILL DIAMETER: 75 MM
TOTAL POWER REQUIREMENT: 7,5 KW
WEIGHT OF THE MACHINE CA.: 3,15 T
DIMENSIONS OF THE MACHINE CA.: 3,65 X 1,0 X 1,3 M
HIGHLIGHTS
- LARGE 103MM SPINDLE BORE
- HIGH CUTTING PERFORMANCE, OPTIMUM CUTTING RESULTS
- ELECTROMECHANICAL SPINDLE BRAKE
- SOPHISTICATED GEAR DESIGN FOR TRANSMITTING THE ENGINE POWER IN HIGH
TORQUES AND STRONG CUTTING FORCES
- TUNED, STIFF CONSTRUCTION FOR THE ABSORPTION OF LARGE CUTTING FORCES
- TAILSTOCK CONSTRUCTION WITH LARGE RADIUS FOR THE MACHINING OF LONG WAVES
- FEED OPERATION VIA ONE-HAND LEVER TECHNOLOGY WITH RAPID TRAVERSE FUNCTION
DELIVERY:
3-JAW CHUCK 315 MM, 4-JAW FACE CHUCK 400 MM, 1 PIECE
RUNNING BEZEL, 1 PIECE STANDING BEZEL, 120-250 MM PASSAGE.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 61.400 €
Ubicación: Land-demo unit: aim553 optical advanced industrial multi sensor 3d-cnc-koordinatenmesszentrum
 
aim koordinatenmesszentren are the technical successor to the worldwide operating mahr multisensor coordinate measuring machines. the modular and at any time on - and can be retrofitted device technology ensures maximum flexibility, universality and technical progress. aim koordinatenmesszentren based on jahrzehntelanger measurement and constructive experience and technology among the leading equipment world.
 
technical data:
 
measuring range: 500 x 500 x 300 mm
dimensions: 1450 x 1050 x 2040 mm
weight: approx. 1,000 kg
maximum workpiece weight: on glass plate approx. 25 kg
 
accuracy: u1 = 1.9 + l/200
                            u2 = 2,4 + l/150
                            u3 = 2.9 + l/100 (l = measuring length in mm)
increased accuracy on request
 
travel speed: 200 mm / s
acceleration: 400 mm / s
scale resolution: 0.0001 mm

multi sensor-sensorikeinheit (msh) optical + laser
consisting of modular profitech multi sensor head
high-quality, high-performance components of our own production and
development. all sensory systems are specific to request with future
and existing developments, such as line laser or cws
(chromatic white light sensor), modularly extendable.
including highly accurate usb camera with 2-step zoom with telecentric
beam path
incl. ptl01 ttl point laser, high-precision, tele-centric coupled
including quad-light led light power ring light, programmable
incl. led power light, programmable
incl. nikon precision lens 10 x c-mount technology
incl. calibration standard with factory calibration certificate, consisting of glass plate
"circle"

pc from value station on industry standard on windows 7 ultimate
incl. control panel integration for space-saving design of the system
including dual-view 2-monitor operation as an optimum work environment
incl. 2 x tft 24 "brand monitor resolution
incl. 2 x lan network connection to company networks remotely services
incl. softwaredongle safenet
including software training documentation and manual
incl. manual opticheck3d
incl. acronis true image backup software
including mouse-keyboard combination

software:
opticheck3d system software version 4.5 ultimate

opticheck3d is one of the best and most efficient in the world
software solutions. opticheck3d offers a unique stable and comprehensive
software environment, an equally easy and quickly
learning, free, customizable user interface, as well as a free
programmable system environment to solve individual and
offers the most complex measuring tasks.

software opticheck3d 4.5 full version: extensive
applications and programmable system environment
including statistics online module for evaluation in the serienmessbetrieb
incl. os stat interface transfer measurements on parent
systems
including dxf import and export interface
including preparation for renishaw scanning probe systems and key exchange
including excel interface to export data in the windows environment
visualiserte incl. option display of measurement results
including predefined measurement protocol creation with numerous options
incl. option editor for fast and secure program correction
excel test result plots individualized including predefined
including language and system settings multinational
measurement processes automated incl. option series/range measurement
incl. online user help per feature / per step
more details and features in the opticheck3d data sheets and
system description available

powerful software tools support the user in the fast
implementation of simple and complex measuring tasks. the open and free
programmable system environment of opticheck3d are the
realization of complex measuring tasks virtually no limits. the logical
design of the comprehensive program features allows a quick and
fault-redundant implementation of all measuring tasks.

more information on request
    DEMO UNIT: AIM553 OPTICAL ADVANCED INDUSTRIAL MULTI SENSOR 3D-CNC-KOORDINATENMESSZENTRUM AIM KOORDINATENMESSZENTREN ARE THE TECHNICAL SUCCESSOR TO THE WORLDWIDE OPERATING MAHR MULTISENSOR COORDINATE MEASURING MACHINES. THE MODULAR AND AT ANY TIME ON - AND CAN BE RETROFITTED DEVICE TECHNOLOGY ENSURES MAXIMUM FLEXIBILITY, UNIVERSALITY AND TECHNICAL PROGRESS. AIM KOORDINATENMESSZENTREN BASED ON JAHRZEHNTELANGER MEASUREMENT AND CONSTRUCTIVE EXPERIENCE AND TECHNOLOGY AMONG THE LEADING EQUIPMENT WORLD. TECHNICAL DATA: MEASURING RANGE: 500 X 500 X 300 MM DIMENSIONS: 1450 X 1050 X 2040 MM WEIGHT: APPROX. 1,000 KG MAXIMUM WORKPIECE WEIGHT: ON GLASS PLATE APPROX. 25 KG ACCURACY: U1 = 1.9 + L/200 U2 = 2,4 + L/150 U3 = 2.9 + L/100 (L = MEASURING LENGTH IN MM) INCREASED ACCURACY ON REQUEST TRAVEL SPEED: 200 MM / S ACCELERATION: 400 MM / S SCALE RESOLUTION: 0.0001 MM MULTI SENSOR-SENSORIKEINHEIT (MSH) OPTICAL + LASER CONSISTING OF MODULAR PROFITECH MULTI SENSOR HEAD HIGH-QUALITY, HIGH-PERFORMANCE COMPONENTS OF OUR OWN PRODUCTION AND DEVELOPMENT. ALL SENSORY SYSTEMS ARE SPECIFIC TO REQUEST WITH FUTURE AND EXISTING DEVELOPMENTS, SUCH AS LINE LASER OR CWS (CHROMATIC WHITE LIGHT SENSOR), MODULARLY EXTENDABLE. INCLUDING HIGHLY ACCURATE USB CAMERA WITH 2-STEP ZOOM WITH TELECENTRIC BEAM PATH INCL. PTL01 TTL POINT LASER, HIGH-PRECISION, TELE-CENTRIC COUPLED INCLUDING QUAD-LIGHT LED LIGHT POWER RING LIGHT, PROGRAMMABLE INCL. LED POWER LIGHT, PROGRAMMABLE INCL. NIKON PRECISION LENS 10 X C-MOUNT TECHNOLOGY INCL. CALIBRATION STANDARD WITH FACTORY CALIBRATION CERTIFICATE, CONSISTING OF GLASS PLATE "CIRCLE" PC FROM VALUE STATION ON INDUSTRY STANDARD ON WINDOWS 7 ULTIMATE INCL. CONTROL PANEL INTEGRATION FOR SPACE-SAVING DESIGN OF THE SYSTEM INCLUDING DUAL-VIEW 2-MONITOR OPERATION AS AN OPTIMUM WORK ENVIRONMENT INCL. 2 X TFT 24 "BRAND MONITOR RESOLUTION INCL. 2 X LAN NETWORK CONNECTION TO COMPANY NETWORKS REMOTELY SERVICES INCL. SOFTWAREDONGLE SAFENET INCLUDING SOFTWARE TRAINING DOCUMENTATION AND MANUAL INCL. MANUAL OPTICHECK3D INCL. ACRONIS TRUE IMAGE BACKUP SOFTWARE INCLUDING MOUSE-KEYBOARD COMBINATION SOFTWARE: OPTICHECK3D SYSTEM SOFTWARE VERSION 4.5 ULTIMATE OPTICHECK3D IS ONE OF THE BEST AND MOST EFFICIENT IN THE WORLD SOFTWARE SOLUTIONS. OPTICHECK3D OFFERS A UNIQUE STABLE AND COMPREHENSIVE SOFTWARE ENVIRONMENT, AN EQUALLY EASY AND QUICKLY LEARNING, FREE, CUSTOMIZABLE USER INTERFACE, AS WELL AS A FREE PROGRAMMABLE SYSTEM ENVIRONMENT TO SOLVE INDIVIDUAL AND OFFERS THE MOST COMPLEX MEASURING TASKS. SOFTWARE OPTICHECK3D 4.5 FULL VERSION: EXTENSIVE APPLICATIONS AND PROGRAMMABLE SYSTEM ENVIRONMENT INCLUDING STATISTICS ONLINE MODULE FOR EVALUATION IN THE SERIENMESSBETRIEB INCL. OS STAT INTERFACE TRANSFER MEASUREMENTS ON PARENT SYSTEMS INCLUDING DXF IMPORT AND EXPORT INTERFACE INCLUDING PREPARATION FOR RENISHAW SCANNING PROBE SYSTEMS AND KEY EXCHANGE INCLUDING EXCEL INTERFACE TO EXPORT DATA IN THE WINDOWS ENVIRONMENT VISUALISERTE INCL. OPTION DISPLAY OF MEASUREMENT RESULTS INCLUDING PREDEFINED MEASUREMENT PROTOCOL CREATION WITH NUMEROUS OPTIONS INCL. OPTION EDITOR FOR FAST AND SECURE PROGRAM CORRECTION EXCEL TEST RESULT PLOTS INDIVIDUALIZED INCLUDING PREDEFINED INCLUDING LANGUAGE AND SYSTEM SETTINGS MULTINATIONAL MEASUREMENT PROCESSES AUTOMATED INCL. OPTION SERIES/RANGE MEASUREMENT INCL. ONLINE USER HELP PER FEATURE / PER STEP MORE DETAILS AND FEATURES IN THE OPTICHECK3D DATA SHEETS AND SYSTEM DESCRIPTION AVAILABLE POWERFUL SOFTWARE TOOLS SUPPORT THE USER IN THE FAST IMPLEMENTATION OF SIMPLE AND COMPLEX MEASURING TASKS. THE OPEN AND FREE PROGRAMMABLE SYSTEM ENVIRONMENT OF OPTICHECK3D ARE THE REALIZATION OF COMPLEX MEASURING TASKS VIRTUALLY NO LIMITS. THE LOGICAL DESIGN OF THE COMPREHENSIVE PROGRAM FEATURES ALLOWS A QUICK AND FAULT-REDUNDANT IMPLEMENTATION OF ALL MEASURING TASKS. MORE INFORMATION ON REQUEST
Vendedor: Profitech Technologies GmbH
Año de construcción: usado
Ubicación: Land-dimensions: 790 x 525/700 x 640 mm<br/>stacking container with opening<br/><br/>different makes, heson-type products made of sheet steel<br/>robust steel construction for high stability and load capacity<br/>including stacking edge for safe stacking<br/>optimum space utilization, multiple stackable<br/>rusty spots. we recommend sandblasting and painting the boxes.<br/><br/><br/><br/><br/> DIMENSIONS: 790 X 525/700 X 640 MM
STACKING CONTAINER WITH OPENING

DIFFERENT MAKES, HESON-TYPE PRODUCTS MADE OF SHEET STEEL
ROBUST STEEL CONSTRUCTION FOR HIGH STABILITY AND LOAD CAPACITY
INCLUDING STACKING EDGE FOR SAFE STACKING
OPTIMUM SPACE UTILIZATION, MULTIPLE STACKABLE
RUSTY SPOTS. WE RECOMMEND SANDBLASTING AND PAINTING THE BOXES.




Vendedor: WeMa A. Pigge GmbH
Año de construcción: usado
Ubicación: Land-foot grid made of galvanized steel

manufacturer: dexion
material: steel galvanized
foot grid length: 3,000 mm
foot grid width: 150 mm
foot grid height: 50 mm

the foot grid have a surface profiling, which guarantee optimum safety when walking.

the foot is in full contact with the slip-resistant surface and thus providing a high degree of safety while walking.

the special long hole profile ensures best snow permeability and thus secure grip even in winter.

number of profiles:

3,000 mm: 36 pieces
2.700 mm:  1 piece
1.800 mm: 16 pieces
1,000 mm:  5 pieces

total: 140,500 mm = 140,50 m

we can arrange shipping, if necessary we gladly prepare a quote!

in very good condition!  FOOT GRID MADE OF GALVANIZED STEEL MANUFACTURER: DEXION MATERIAL: STEEL GALVANIZED FOOT GRID LENGTH: 3,000 MM FOOT GRID WIDTH: 150 MM FOOT GRID HEIGHT: 50 MM THE FOOT GRID HAVE A SURFACE PROFILING, WHICH GUARANTEE OPTIMUM SAFETY WHEN WALKING. THE FOOT IS IN FULL CONTACT WITH THE SLIP-RESISTANT SURFACE AND THUS PROVIDING A HIGH DEGREE OF SAFETY WHILE WALKING. THE SPECIAL LONG HOLE PROFILE ENSURES BEST SNOW PERMEABILITY AND THUS SECURE GRIP EVEN IN WINTER. NUMBER OF PROFILES: 3,000 MM: 36 PIECES 2.700 MM: 1 PIECE 1.800 MM: 16 PIECES 1,000 MM: 5 PIECES TOTAL: 140,500 MM = 140,50 M WE CAN ARRANGE SHIPPING, IF NECESSARY WE GLADLY PREPARE A QUOTE! IN VERY GOOD CONDITION!
Vendedor: Tank und Apparate Barth GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 410 mm<br/>turning diameter over slide rest: 540 mm<br/>turning length: 1000 mm<br/>0: 4,0 kw<br/>centre height: 205 mm<br/>bed width: 206 mm<br/>turning speeds: 30-3000 u/min<br/>tail stock:  <br/>tailstock taper mt: mk 3 <br/>quill stroke: 130 mm<br/>diameter of quill: 45 mm<br/>spindle bore: 52 mm<br/>spindle cone: mk 6 <br/>x-axis: 100 mm<br/>y-axis: 195 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 780 kg<br/>dimensions of the machine ca.: 1,92x0,74x1,55 m<br/>fixed bezel passage 5-85 mm<br/>running bezel passage 5-65 mm<br/>fixed centering point mk 3<br/>revolving centering point mk 3<br/>quick change steel holder e3<br/>steel holder 20x100 type d for square chisels<br/>round steel holder 300x100 tyo h for round chisel<br/>3-jaw chuck 200 mm<br/>collet chuck cc 5c<br/>collet set 3-25 mm<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 410 MM
TURNING DIAMETER OVER SLIDE REST: 540 MM
TURNING LENGTH: 1000 MM
0: 4,0 KW
CENTRE HEIGHT: 205 MM
BED WIDTH: 206 MM
TURNING SPEEDS: 30-3000 U/MIN
TAIL STOCK:
TAILSTOCK TAPER MT: MK 3
QUILL STROKE: 130 MM
DIAMETER OF QUILL: 45 MM
SPINDLE BORE: 52 MM
SPINDLE CONE: MK 6
X-AXIS: 100 MM
Y-AXIS: 195 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 780 KG
DIMENSIONS OF THE MACHINE CA.: 1,92X0,74X1,55 M
FIXED BEZEL PASSAGE 5-85 MM
RUNNING BEZEL PASSAGE 5-65 MM
FIXED CENTERING POINT MK 3
REVOLVING CENTERING POINT MK 3
QUICK CHANGE STEEL HOLDER E3
STEEL HOLDER 20X100 TYPE D FOR SQUARE CHISELS
ROUND STEEL HOLDER 300X100 TYO H FOR ROUND CHISEL
3-JAW CHUCK 200 MM
COLLET CHUCK CC 5C
COLLET SET 3-25 MM




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación:
sale as shown, a demonstration of power is possible..gif" alt="Land-tip height 160 mm top width 630 mm circular diameter over machine bed 320 mm circular diameter over slide 190 mm circular diameter without bed bridge 430 mm length of the bed bridge 230 mm
spindle speed 65 - 1800 min-1
number of steps 18 steps of spindle cone mk 5 spindle carrier asa d 1-4 "spindle bore 38 mm bed size 181 mm upper slide stroke 85 mm cross slide travel 162 mm of tailstock taper mk3 tailstock quill stroke 100 mm longitudinal feed (32) 0.052 1,392 mm / u planvorschub(32) 0.014 0.380 mm / u thread pitch metric 0.4-7 mm pitch - 56-4 gg/1 inch" four-way toolpost recording height 16 mm motor 1,1 kw 400 v ~ 50 hz dimensions (l x w x h) 1390 x 760 x 1420 mm weight 485 kg

sale as shown, a demonstration of power is possible." style="height: 18px;"> TIP HEIGHT 160 MM TOP WIDTH 630 MM CIRCULAR DIAMETER OVER MACHINE BED 320 MM CIRCULAR DIAMETER OVER SLIDE 190 MM CIRCULAR DIAMETER WITHOUT BED BRIDGE 430 MM LENGTH OF THE BED BRIDGE 230 MM
SPINDLE SPEED 65 - 1800 MIN-1
NUMBER OF STEPS 18 STEPS OF SPINDLE CONE MK 5 SPINDLE CARRIER ASA D 1-4 "SPINDLE BORE 38 MM BED SIZE 181 MM UPPER SLIDE STROKE 85 MM CROSS SLIDE TRAVEL 162 MM OF TAILSTOCK TAPER MK3 TAILSTOCK QUILL STROKE 100 MM LONGITUDINAL FEED (32) 0.052 1,392 MM / U PLANVORSCHUB(32) 0.014 0.380 MM / U THREAD PITCH METRIC 0.4-7 MM PITCH - 56-4 GG/1 INCH" FOUR-WAY TOOLPOST RECORDING HEIGHT 16 MM MOTOR 1,1 KW 400 V ~ 50 HZ DIMENSIONS (L X W X H) 1390 X 760 X 1420 MM WEIGHT 485 KG

SALE AS SHOWN, A DEMONSTRATION OF POWER IS POSSIBLE.
Vendedor: GambTec
Año de construcción: usado
Ubicación: Land-total power requirement: 3,67 kw<br/>cutting diameter: 330 mm<br/>saw band length: 3870 x 34 x 1,1 mm<br/>cutting width: 400 mm<br/>band speed: 15 - 90 m/min<br/>: 400 x 200 mm<br/>cutting capacity - round: 330 bei 90° mm<br/>cutting capacity - square: 320 bei 90° mm<br/>: 250 x 170 mm<br/>cutting capacity - round: 250 bei 45° mm<br/>cutting capacity - square: 230 bei 45° mm<br/>cutting capacity - round: 165 / 60° mm<br/>: 150 x 150 mm<br/>cutting capacity - square: 150 / 60° mm<br/>coolant tank: 770 l<br/>work height max.: 925 mm<br/>weight of the machine ca.: 1450 kg<br/>dimensions of the machine ca.: 2050 x 2600 x 2150 mm<br/>a completely new, revolutionary concept of the band saw arm casting and a new, <br/>unique design. the band saw arm casting is hollow in its full length and it <br/>forms a closed section. this ensures optimum stiffness of the whole system and <br/>maximum accuracy cutting. the robust band saw is generally suitable for all <br/>demanding production plants. the saw band sized 34 x 1.1 mm ensures accurate <br/>cutting of large cross-sections. the band is manufactured in many versions and <br/>allows for cutting of wide range of materials, including stainless steel or <br/>tool steel.<br/><br/><br/><br/><br/> TOTAL POWER REQUIREMENT: 3,67 KW
CUTTING DIAMETER: 330 MM
SAW BAND LENGTH: 3870 X 34 X 1,1 MM
CUTTING WIDTH: 400 MM
BAND SPEED: 15 - 90 M/MIN
: 400 X 200 MM
CUTTING CAPACITY - ROUND: 330 BEI 90° MM
CUTTING CAPACITY - SQUARE: 320 BEI 90° MM
: 250 X 170 MM
CUTTING CAPACITY - ROUND: 250 BEI 45° MM
CUTTING CAPACITY - SQUARE: 230 BEI 45° MM
CUTTING CAPACITY - ROUND: 165 / 60° MM
: 150 X 150 MM
CUTTING CAPACITY - SQUARE: 150 / 60° MM
COOLANT TANK: 770 L
WORK HEIGHT MAX.: 925 MM
WEIGHT OF THE MACHINE CA.: 1450 KG
DIMENSIONS OF THE MACHINE CA.: 2050 X 2600 X 2150 MM
A COMPLETELY NEW, REVOLUTIONARY CONCEPT OF THE BAND SAW ARM CASTING AND A NEW,
UNIQUE DESIGN. THE BAND SAW ARM CASTING IS HOLLOW IN ITS FULL LENGTH AND IT
FORMS A CLOSED SECTION. THIS ENSURES OPTIMUM STIFFNESS OF THE WHOLE SYSTEM AND
MAXIMUM ACCURACY CUTTING. THE ROBUST BAND SAW IS GENERALLY SUITABLE FOR ALL
DEMANDING PRODUCTION PLANTS. THE SAW BAND SIZED 34 X 1.1 MM ENSURES ACCURATE
CUTTING OF LARGE CROSS-SECTIONS. THE BAND IS MANUFACTURED IN MANY VERSIONS AND
ALLOWS FOR CUTTING OF WIDE RANGE OF MATERIALS, INCLUDING STAINLESS STEEL OR
TOOL STEEL.




Vendedor: Sperling Werkzeugmaschinen
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more OPTIMUM types: