1,359 otras máquinas para el procesado de madera usadas para la venta

Transportador de residuos para secciones 6m + 3 altura

LINEA COMPLETA DE SAWMILL DE ALTA VELOCIDAD (capacidad 80 000 fm):__________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ _________________________________________________________ ...

Sistema completo de astillado LINDNER 150/400 37kW con vibrurine aprox. 17 m, sieb zone aprox. 5m, conductor arqueado aprox. 6 m de altura, Laengskratzer en 3 bunkers aprox. 12m, drum sieve. Inmediatamente disponible; Listo

Se vende secadora rotativa hecha de Bisonte, potencia 5 t/h, con estufa de calefacción de 6mW con autoalimentación y fllor móvil autolimpiante. Con todo lo necesario equipo, ciclón, chimenea y ventiladores. Precio 110.000,00 EUR EXW. +38765812388 Neven

A la venta trituradora renovada fabricada por HOMBACK con 250kw. Se utiliza para triturar madera en madera astillada de labranza larga.

Semiautomático

Ancho máximo de trabajo: 1300mmGrosor máximo de trabajo: 140mm. Ancho de mecanizado: 1300mmRodillos de alimentación motorizados2 unidades de cepillado

machine 1:Fixed side at the left, working width 220 mm to 2500 mmWorkpiece overhang max. 110 mmElectronic width adjustmentPanel thickness 8 - 90 mmTop pressure by beltsRolling chain with automatic lubrication, automatic pop-up dogs every 1000 mmFeed speed 10 - 40 m/minChain infeed taking 1,62 m. panels in front of the dogsPanel alignment at the infeedMiddle supportNC 30 controllsEquipment left and right:1+1 Jump universal shaper 6 kW1+1 Twin hogging unit, motors 6,6 kW (2 motors)1+1 Universal shaper 6 kW1+1 Jump universal shaper 6 kWpanel turning device HOMAG TD 31/30/13Year 1989machine 2:Fixed side at the left, working width 220 mm to 3000 mmWorkpiece overhang max. 110 mmElectronic width adjustmentPanel thickness 8 - 90 mmTop pressure by beltsRolling chain with automatic lubrication, automatic pop-up dogs every 1000 mmFeed speed 8 - 40 m/minChain infeed taking 1,62 m. panels in front of ...

Trituradora de tambor con empujador hidráulico Ancho del tambor de la navaja: 800 mm Boca 800 x 1200 mm Motor: 18,5 kW Diámetro de conexión de extracción 200 mm

Fixed side at the leftFeedspeed 18 - 25 m/minWorking width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mmPanel overhang 30mmPanel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations)Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mmCoil diameter 830 mmEquipment:Sprayers release agentSquaring device with 2 motors each 3 kWEdge heatingEdge magazine for 2 coils, guillotine for edges up to 3 mmGlueing part A20 with quickmelt applicationLateral pressure zone K, 1 driven and 6 after pressing rollersEnd trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kWContour trimming, 2 exchange unitsProfile scraping PN10Flat scrapers FA11Sprayers cleaning agentBuffingAutomation package straight/chamfer:-Automatic adjustment infeed fence-Automatic setting of pressure rollers-Pneumatic setting of end trims-Pneumatic setting of rough trims-Automatic setting of chamfer/ra ...

Single sided edge bander with hot melt, fixed side at the right, pre-milling unitEdge thickness: 0,4 to 12 mmWorkpiece thickness: 8 - 60 mmFeedspeed 8-20 m/min (limited to 10 m/min using the contour trimming)Workpiece transport by chain, top pressures with rubber rollersSound enclosure over all trimming motorsEquipment:Adjustable fencePre-milling with 2 shapers, each 2,2 kWCoil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollersEnd trims, 2 x 0,35 kW motors, straight and chamfer 15°Top/bottom trimming, motors 2 x 0,35 kWRadius trimmmingContour trimming unit, leading and following edge, 2 x 0,35 kWRadius scraping unitGlue scrapersBuffing unitControlls PC 20+

Ajuste motorizado de alturaCaja acústica sobre todos los motores de recorteEquipo: Cargador de bobinas y tirasUnidad de fusión caliente Zona de presión Trimes finales, bisellín y recto, ajuste automático Corte rugoso arriba/abajo Recorte fino arriba/abajo, inclinación, unidad de recorte de contorno Unidad de raspado Unidad de pulido transportador de retorno Ligmatech ZHR 05

Grosor de la pieza: 8 - 50 mm Grosor de filo: bordes de la bobina 0,4 - 3 mm Velocidad de avance 10 m/min Equipamiento: ajuste manual de altura. Unidad de fresado de juntas, 2 motores Calentamiento de bordes de panel Área de pegado Zona de presión Rodillos 1 accionados y 2 no accionados Acabados de extremo, 2 motores de 0,8 kW, recto y biselfado 15 Recorte superior e inferior Raspador de perfil para bordes de PVC Raspadores de pegamento

Min./max. thickness edge banding on roll: 0,4 - 3mmMin./max. thickness edge banding in strips: 5 mmMin./max. panel thickness: 8 - 50mmMin. panel length/width: 190/110mmThroughput speed: 9m/minPre-milling unit: 2,2kW 7200 rpmSprayers release agentPanel heating device Automatic laoding for edgesGluing unit: 0,18kWEnd-cutting unit with radius: 0,19kWTrimming unit: 2x 0,35kW, 12000rpmRounding unit up to 3mm: 0,35kWEdge scraping unitSprayers cleaning agentGlue scraping unitBrushing unit

4-side squaring and edge banding lineMachine 1:Fixed side right, moving side leftRolling chain, feed 10 - 40 m/minControlls NC 21Panel thickness 8 - 60 mmMax. panel width 1500 mmEdges: coil 0,3 - 3 mm, strips 0,4 - 20 mmEntry fence for veneered panelsEquipment:1+1 Compact-twin hogger, 2 motors 6,6 kW1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application1+1 Free space for solid wood edges up to 2,54 m length1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm)1+1 Universal shaper 8,1 kW1+1 Universal shaper 8,1 kW1+1 Edge sander KS 101+1 Disc sander DS 401+1 Disc sander DS 40Angular transfer to the right, TWR 24/30/12/SPanel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mmMachine 2Machine II + infeed magazine TW 24Fixed side right, m ...

Área de trabajo: X 5200 x Y 1260 mm Cabezazo del husillo principal: X 5709 mm, Y 1650 mm8 Consolas de pieza de trabajo Equipamiento: Unidad de perforación con 18 husillos, 12 spíndles verticales, 6 husillos horizontales (4 en dirección X, 2 en dirección Y ) Sierra de ranura Motor de fresado 11 kW, máximo 20000 rpm, HSK-F 63 de recogida, refrigerado por líquido, controlado de 5 ejes Cambiador de herramientas con 16 posiciones Cambiador lateral con 8 posiciones Control PC

Working field: axis x: 2310 mm, axis y: 628 mm, axis z: 90mmMax programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/minDrill chuck: diameter 10 mmSpindle speeds: 4000 rpmGrooving saw: diameter 120 mmDrill spindles: 4 horizontal spindles in X,12vertical spindles in X lineWorking air pressure: 6 barMax consumption of compressed air: 0,75 NL/cycleInstalled power: max 7.5 kWCapacity of vacuum tools: 40 m³/hCNC:screen: monochromatic 9”Floppy disk unitPLC for control of the machine cycle

Campo de trabajo: eje x: 3200 mm, eje y: 944 mm, eje z: 110 mmVelocidad máxima programable: eje x: 100 m/min, eje y: 75 m/min, eje z: 15 m/minPortaperforadores: diámetro 10 mmVelocidades del husillo: 4000 rpmSierra de ranura: diámetro 120 mmHuecos de taladro: 24 husillos horizontales en X, 10 husillos verticales en XPresión de trabajo presión de aire, presión de aire: 6 barPotencia instalada: máximo 25 kWCadicidad de herramientas de vacío: 40 m³/hCNC: pantalla: monocromática unidad de disquete de 9".

Working area: X 5020 x Y 1680 mm8 FX-matic automatic workpiece consolesAdditional base module for FX-Matic beamPre-equipment for pneumatic clampingH110 stops at the front of each beamH110 stops in the middle of each beamH110 stops at the rear of each beamPneumatic horizontal clamps for stair posts or beamsVacuum cup H110 145x145mmRotatable vacuum cup H110 145x55mmRotatable vacuum cup H110 180x65mmVacuum pump capacity 300m³/hIndependent chip removal systemMounting option for corner unitsMeasuring system for tool lengthMeasuring system for panel thickness Air conditioning/heat exchanger for control cabinetLaser projector with green laser Option to shuttleEquipment:Milling motor 12kWRapid 12 magazine next to milling motorRapid 24 magazine at rear of portal

Single sided postforming line, capable of doing L - and U profiles, with or without insert.Workpiece thickness: 16 to 60 mm.Min. workpiece width: 150 mm.Workpiece overhang: 70 mm.Max. laminate overhang: 105 mm.Feed speed 3 - 18 m/min.Fence side at the leftEquipment:Squaring and shaping part:1 x Postforming squaring unit, 2 motors each 1kW, 1st motor removing the laminate, 2nd motor trimming the overhaning laminate1 x scoring, motor 1 kW, top position1 x milling unit for the laminate when doing U profiles 1 x laminate support Postforming part1 x blow cleaning nozzle 6 x glue nozzle for the glue application 2 x glue roller9 x IR heating, each 2,2 kW2 x Hot air blower, each 10 kW1 x Basic postforming pressure zone for L-profiles, using rollers1 x Basic postforming pressure zone for U-profiles, using rollers1 x VF postforming pressure zone for special profiles, using pressure pathsFinishing  ...

Machine designed for machining solid wood doors with frame and raised panelsWorkpiece dimensions Length 150 - 3000 mm Width 40 - 300 mm Thickness 20 - 60 mm Material: hard woods/soft woods Machine equiped with 2 working areas, including - 3 NC-axes X, Y, Z- telephone modem- 1 sawing unit- 1 horizontal boring unit- distance horizontal drill above table (Z):max. 40 mm- fixed workpiece table- central lubrication- CE package- max. workpiece length 2.400 mm KOCH Numeric with 3 NC-axes Positioning control with PC Pentium CPU Operating system Windows XP Professional: english 15” Touchpanel VGA + Touchscreen by means of LVDS connection USB-connection on PC and on Touchpanel Seriel and parallel interface on the PC Hard disk 2,5 Input of machine commands and motor control through the Touchpanel PS2 connection for external keyboard Office PC software Stretched machine bas for max. workpiece widt ...

Fixed side at the leftPanel thickness min/max: 16/45 mmMin. panel width: 150 mmLateral panel support for panel width up to 900 mmMin/max. panel length: 700 / 3100 mmMax. laminate overhang: 110 mmMax. laminate thickness: 0,8 mmRadius min/max: 6 / 22 mm (depends the laminate)Feedspeed max. 18 m/minTop pressure by beltEquipment:Infeed fence, adjustable, defines the panel overhang2 x trimming unit 0,4 kW, HSK 25 toolholder1 x PVAc glue application5 x glue nozzle, adjustable1 x hot air blower3 x IR heating on top (55 cm length), 3 x bottom (90 cm length)Postforming zone 1,8 m. lengthVarious pre-installed profiling sets 1 x top trimmer 0,4 kW

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mmFixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mmWorkpiecetransport with belts, infeed belts can lift upVariable feed speedEach side has got 5 glue injectors and 8 dowel inserters (Type 34)Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mmEach side with dowel hopper feed with shaker and separatorsControll mirrorGlue pump 1:1 Glue injection controlls type ELC

X=3700mm Y=1440mm, Z=150mmMoving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min8 supports with vacuum cups, pneumatic clamping8 fences at the rear8 fences in front2 left fences and 2 right fences6 rails for panel loading with pneumatic liftingPositioning the vacuum cups using a laser1 connection for templatesVacuum pump with flow rate 100 m3/hConfiguration V25,H8X/6Y, N1 X-Y 90°, F1-HSK63-15KW,F1-HSK63-9KW, C axis, W14 rearMain motor 15 kW, 1250-24000 rpm, air-cooled, 360° C-axis, C-axis interpolation axis, HSK 63 mountingC axis extension for flex-5 aggregateMain motor 9 kW, 1250-24000 rpm, air cooled, HSK 63 mountingTool changer operating in X direction with 14 positions, rear mounted2 x 4 vertical X drilling pins, 2 x 3 vertical Y drilling pins14 horizontal drilling spindles90° groove saw X-Y directionPC 85 power control software with:Woodwop: workshop-oriented programming systemImpor ...

Capacidad máxima de elevación: 300 kgAlcance máximo: 8 mAltura máxima de alcance: +-3 mDimensiones de las placas de succión: (6x) 100x340 mm

Versión derecha Sierra de corte: 1,5 kW2 x eje horizontal: 2 x 1,5 kW1 x eje vertical, diámetro 50 mm, longitud 160 mm, 2,2 kW

Right-hand versionWorkpiece dimensions: max. length 3000 mm, min. 250 mm, max. thickness 100 mm, min. 30 mm, width 200 mmOverhead cutting saw, 3 kW, 3000 rpm, manual horizontal movement over 120 mm, 400 mm blade, cutting height 100 mm1 vertical shaft, 340 mm long, 40 mm diameter, 7.5 kW, 3100 rpm, suction port with 150 mm diameter (x2), max. tool diameter: 320 mmCarriage with pneumatic clamping1100 x 500 mm tableStop, positioning from -45° to 45°Motorized carriage with electronic control 2-32 m/min

Working width 180 - 3200 mm, electronic setting Sieb & MeyerFixed side at the leftChain transport, 80 mm wideInfeed for panels of about 1 m.Top pressure by driven beltsMax. workpiece thickness: 80 mmFeedspeed 7 - 35 m/min, motor 4 kWPop-up dogs every 1m10Equipment left / right:1 st postFront: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 2,2 / 3,3 kW, 50/100 HzRear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz2nd postFront: 1+1 Jump milling, tilting, motor 1,5 kW, 100 HzRear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz3th postFront: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 HzRear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 HzAll units with horizontal/vertical adjustment and Siko read-outOutfeed chain approx. 80 cm lengthSound and safety enclosures

Machine for cutting, milling, drilling and dowelling frames or rails, straight or mitre, with or without counter profiles in small batch size or one-off productionWorkpiece length 160 - 2350 mm.Workpiece width:- 20 - 140 mm for 2 workpieces per field- 20 - 100 mm for 2 workpieces per field at 45 °- 20 - 300 mm for 1 workpiece per fieldWorkpiece thickness 10 - 30 mm.Angle adjustable between 45 ° and 90 °Tables can be tilted 25 °PC controlled on 3 axesDrilling and inserting on point-to-point basisEquipment:Sawing station: saw blade 350 x 30 mm, motor 2.2 kW, 2800 R / minDrilling station: drill bit diameter 10 mm, motor 2 kWMilling station: diameter tool 100 - 200 mm, spindle diameter 40 mm, clamping length 70 mm, motor 3 kW, 6000 - 12000 R / minDowelling station: dowel dimensions 8 x 30 mm, 8 x 20 mm

Esta FORMAT4 chapadora de cantos TEMPORA 60.06 glueBox x-motion se fabricó en 2024. Cuenta con un almacén de plataforma giratoria con un diámetro de 750 mm para material de canteado de 0,4 a 3 mm, una unidad de aplicación GlueBox y unidades de pulido superior e inferior. La máquina incluye un control avanzado x-motion Plus con una pantalla 15 SmartTouch y una unidad de fresado multifuncional para un mecanizado preciso de bordes de plástico. Contáctenos para obtener más información sobre esta máquina.