1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-technical data:

-mot 3. driven roller - hydr. delivery of the two bottom rollers + the two setup roles / lead role
-the machine is 240 n / mmâ² strength of the material / yield point horizontally or vertically can be used-
/ re max torque 25
-bending performance: - flat stock - upright 80 x 20 mm ã? 800 mm - flat 140 x 30 mm ã? 700 mm
-hea 120 ã? 1000 mm
-tubular 88.9 x 3, 2 ã? 1000 mm
-bending speed 0-5 m / min
-roll diameter 290 mm
-shaft diameter 90 mm
-drive 400 v / 9,2 kw
-with:-analogue actual value indicators
-standart bending set for flat and angle material - div. tube roller sets 28; 48.3; 
	-weight approx.						2000 kg
	-space requirement approx.		            b h 1600 x 1300 x 1400 mm    
 TECHNICAL DATA: -MOT 3. DRIVEN ROLLER - HYDR. DELIVERY OF THE TWO BOTTOM ROLLERS + THE TWO SETUP ROLES / LEAD ROLE -THE MACHINE IS 240 N / MM² STRENGTH OF THE MATERIAL / YIELD POINT HORIZONTALLY OR VERTICALLY CAN BE USED- / RE MAX TORQUE 25 -BENDING PERFORMANCE: - FLAT STOCK - UPRIGHT 80 X 20 MM � 800 MM - FLAT 140 X 30 MM � 700 MM -HEA 120 � 1000 MM -TUBULAR 88.9 X 3, 2 � 1000 MM -BENDING SPEED 0-5 M / MIN -ROLL DIAMETER 290 MM -SHAFT DIAMETER 90 MM -DRIVE 400 V / 9,2 KW -WITH:-ANALOGUE ACTUAL VALUE INDICATORS -STANDART BENDING SET FOR FLAT AND ANGLE MATERIAL - DIV. TUBE ROLLER SETS 28; 48.3; -WEIGHT APPROX. 2000 KG -SPACE REQUIREMENT APPROX. B H 1600 X 1300 X 1400 MM
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-make flottweg, type z73-4 /451, no 910669, decanter , material stainless steel , screw diameter +/- 720mm, screw length 3100mm, inlet 100mm, motor trommel 45 kw, 400 volt, with variable speed drive , hydraulic drive , with hydraulic unit , motor schroef 22kw, 400 volt, max. rotor speed 2340 rpm, floorspace 5,0x2,5 m, weight 10000kgdecanterscentrifuges > decanters what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE FLOTTWEG, TYPE Z73-4 /451, NO 910669, DECANTER , MATERIAL STAINLESS STEEL , SCREW DIAMETER +/- 720MM, SCREW LENGTH 3100MM, INLET 100MM, MOTOR TROMMEL 45 KW, 400 VOLT, WITH VARIABLE SPEED DRIVE , HYDRAULIC DRIVE , WITH HYDRAULIC UNIT , MOTOR SCHROEF 22KW, 400 VOLT, MAX. ROTOR SPEED 2340 RPM, FLOORSPACE 5,0X2,5 M, WEIGHT 10000KGDECANTERSCENTRIFUGES > DECANTERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-technical data:

-maximum working width 3050 mm - max cutting capacity st 40 6 mm
	-angle adjustable mot.			      0.5-3 â°
-cut gap adjustment by hand
-number of hydraulic hold-down device 18 pcs
	-mot. -rear gauge 10-750 mm
-front angle stop + support arms
	-stroke rate depending on the cutting angle and cutting length 9-17 per/min
	-hydraulic drive 400 v / 7.5 kw
	-table height 770 mm
-space requirement incl. backgauge, without front support arms
	-about 	       b h 3750 x 1600 x 1650 mm
	-weight approx.				  	 4500 kg
	-with: - e - foot - switch
			-cutting line illumination
 TECHNICAL DATA: -MAXIMUM WORKING WIDTH 3050 MM - MAX CUTTING CAPACITY ST 40 6 MM -ANGLE ADJUSTABLE MOT. 0.5-3 ° -CUT GAP ADJUSTMENT BY HAND -NUMBER OF HYDRAULIC HOLD-DOWN DEVICE 18 PCS -MOT. -REAR GAUGE 10-750 MM -FRONT ANGLE STOP + SUPPORT ARMS -STROKE RATE DEPENDING ON THE CUTTING ANGLE AND CUTTING LENGTH 9-17 PER/MIN -HYDRAULIC DRIVE 400 V / 7.5 KW -TABLE HEIGHT 770 MM -SPACE REQUIREMENT INCL. BACKGAUGE, WITHOUT FRONT SUPPORT ARMS -ABOUT B H 3750 X 1600 X 1650 MM -WEIGHT APPROX. 4500 KG -WITH: - E - FOOT - SWITCH -CUTTING LINE ILLUMINATION
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-make flottweg gmbh vilsbiburg (de), type z 73, no 910670, decanter , material stainless steel , screw diameter +/- 720mm, screw length 3100mm, inlet dia.100mm, motor tromel 45 kw, 400 volt, with variable speed drive , hydraulic drive , with hydraulic unit , motor 22 kw, 400 volt,, max. rotor speed 2340 rpm, floorspace 5,0x2,5 m, weight 1000kgdecanterscentrifuges > decanters what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE FLOTTWEG GMBH VILSBIBURG (DE), TYPE Z 73, NO 910670, DECANTER , MATERIAL STAINLESS STEEL , SCREW DIAMETER +/- 720MM, SCREW LENGTH 3100MM, INLET DIA.100MM, MOTOR TROMEL 45 KW, 400 VOLT, WITH VARIABLE SPEED DRIVE , HYDRAULIC DRIVE , WITH HYDRAULIC UNIT , MOTOR 22 KW, 400 VOLT,, MAX. ROTOR SPEED 2340 RPM, FLOORSPACE 5,0X2,5 M, WEIGHT 1000KGDECANTERSCENTRIFUGES > DECANTERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: used machinery auction RESALE 1.000 €
Ubicación: Land-max working width 3,050 mm, max. thickness 6 mm with spare blades MAX WORKING WIDTH 3,050 MM, MAX. THICKNESS 6 MM WITH SPARE BLADES
Vendedor: Indutax GmbH
Año de construcción: usado
Ubicación: Land-make kaspar schultz brauereimaschinenfabrik und apparatebauanstalt, no 6668, new 2010, mounted on legs , vertical pressure tank , material stainless steel , capacity 124 ltr, vessel sizes dia. 440mm x800mm, dished bottom , with cover , outlet dia. 25mm, working pressure 3 bar, max. temperature -5/20 °c., with jacket 1,6 ltr, with propellor stirrer , motor 0,18 kw, 220-240/380-420 volt, speed mixing shaft 850 rpm, floorspace 1,2 x 0,8 m, total height 1,3 m, weight 160 kgpressure vesselstanks > pressure vessels what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE KASPAR SCHULTZ BRAUEREIMASCHINENFABRIK UND APPARATEBAUANSTALT, NO 6668, NEW 2010, MOUNTED ON LEGS , VERTICAL PRESSURE TANK , MATERIAL STAINLESS STEEL , CAPACITY 124 LTR, VESSEL SIZES DIA. 440MM X800MM, DISHED BOTTOM , WITH COVER , OUTLET DIA. 25MM, WORKING PRESSURE 3 BAR, MAX. TEMPERATURE -5/20 °C., WITH JACKET 1,6 LTR, WITH PROPELLOR STIRRER , MOTOR 0,18 KW, 220-240/380-420 VOLT, SPEED MIXING SHAFT 850 RPM, FLOORSPACE 1,2 X 0,8 M, TOTAL HEIGHT 1,3 M, WEIGHT 160 KGPRESSURE VESSELSTANKS > PRESSURE VESSELS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-code: 0569
brand: bcr - italy
model: k 75 mri - ce standard 

automatic edge bander for pre-glued edges - ce  standard 

technical data:
edge thickness up to 1,5 mm
panel height 75 mm
end cutter  for automatic starting and cutting of the belt
group of 2 top / bottom trimmers
automatic panel feed driver 
single-phase power supply
heating time 3 min
overall dimensions:  mm 1600 x 650 x 1100 h
weight  kg 160



 CODE: 0569 BRAND: BCR - ITALY MODEL: K 75 MRI - CE STANDARD AUTOMATIC EDGE BANDER FOR PRE-GLUED EDGES - CE STANDARD TECHNICAL DATA: EDGE THICKNESS UP TO 1,5 MM PANEL HEIGHT 75 MM END CUTTER FOR AUTOMATIC STARTING AND CUTTING OF THE BELT GROUP OF 2 TOP / BOTTOM TRIMMERS AUTOMATIC PANEL FEED DRIVER SINGLE-PHASE POWER SUPPLY HEATING TIME 3 MIN OVERALL DIMENSIONS: MM 1600 X 650 X 1100 H WEIGHT KG 160
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-make azo gmbh + co. osterburken, type behälter d1104 + vb-800 a21, no 404318, new 2003, silo (1x), closed , capacity 4000 ltr, material stainless steel (304), diameter 1100mm, cylindrical height 3000mm, conical bottom 350mm, top connections dia. 300mm + dia. 315mm, outlet with vibro bottom type vb-800 (motor 0,4 kw, 400 volt), outlet dia. 200mm, floorspace 1,8x1,8 m, total height 5,0 msilostanks > silos what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE AZO GMBH + CO. OSTERBURKEN, TYPE BEHäLTER D1104 + VB-800 A21, NO 404318, NEW 2003, SILO (1X), CLOSED , CAPACITY 4000 LTR, MATERIAL STAINLESS STEEL (304), DIAMETER 1100MM, CYLINDRICAL HEIGHT 3000MM, CONICAL BOTTOM 350MM, TOP CONNECTIONS DIA. 300MM + DIA. 315MM, OUTLET WITH VIBRO BOTTOM TYPE VB-800 (MOTOR 0,4 KW, 400 VOLT), OUTLET DIA. 200MM, FLOORSPACE 1,8X1,8 M, TOTAL HEIGHT 5,0 MSILOSTANKS > SILOS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-code: 0568
brand: ghermandi
model: olimpia 200

oscillating bottom belt sanding machine for edges, strips,  wood furnishings and various materials 

technical data:
working width mm 200
work tables lenght mm 1250
motor hp 2,5
extraction motor hp 0,5
adjustable work tables
overall dimensions : mm 1250 x 650 x 1000 h
weight kg 280



 CODE: 0568 BRAND: GHERMANDI MODEL: OLIMPIA 200 OSCILLATING BOTTOM BELT SANDING MACHINE FOR EDGES, STRIPS, WOOD FURNISHINGS AND VARIOUS MATERIALS TECHNICAL DATA: WORKING WIDTH MM 200 WORK TABLES LENGHT MM 1250 MOTOR HP 2,5 EXTRACTION MOTOR HP 0,5 ADJUSTABLE WORK TABLES OVERALL DIMENSIONS : MM 1250 X 650 X 1000 H WEIGHT KG 280
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-make coti srl curnasco, no 205, new 1999, floorspace 2,8x2,8 m, reactor (1x), material stainless steel (304), capacity 12.520 ltr, vessel sizes dia. 2200x2400mm, dished bottom , dished top side , manhole dia. 250mm, top connections (10), outlet dia. 100mm, working pressure vac/3 bar, test pressure 4,5 bar, half coil jacketed (450 ltr), working pressure 4 bar, test pressure 6,5 bar, max. temperature 150 degr. c., with gate type stirrer equipped with scrapers (motor 22 kw), with paddle stirrer /screw ribbon stirrer type dm 1250/300, motor 90,0 kw, 380 volt (ex), total height 6,0 mreactorsreactors > reactors what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE COTI SRL CURNASCO, NO 205, NEW 1999, FLOORSPACE 2,8X2,8 M, REACTOR (1X), MATERIAL STAINLESS STEEL (304), CAPACITY 12.520 LTR, VESSEL SIZES DIA. 2200X2400MM, DISHED BOTTOM , DISHED TOP SIDE , MANHOLE DIA. 250MM, TOP CONNECTIONS (10), OUTLET DIA. 100MM, WORKING PRESSURE VAC/3 BAR, TEST PRESSURE 4,5 BAR, HALF COIL JACKETED (450 LTR), WORKING PRESSURE 4 BAR, TEST PRESSURE 6,5 BAR, MAX. TEMPERATURE 150 DEGR. C., WITH GATE TYPE STIRRER EQUIPPED WITH SCRAPERS (MOTOR 22 KW), WITH PADDLE STIRRER /SCREW RIBBON STIRRER TYPE DM 1250/300, MOTOR 90,0 KW, 380 VOLT (EX), TOTAL HEIGHT 6,0 MREACTORSREACTORS > REACTORS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-crate palletizing and depalletizing station simonazzi year 1998

this palletizing and depalletizing station was built by sasib in 1998. the system was used for unloading empty bottle crates from pallets and loading full bottle crates on pallets. this system was working for a beer filling line with total capacity of 80.000 bph. the system includes one dublex depalletizer, one dublex palletizer, a faulty pallet (protruding nails, incorrect size etc) detection and rejection system, two pallet magazines and pallet conveyors. crates are transported via conveyor belts and turned into proper orientation in a positioning table in each line. the line is still installed in a fair condition.

manufacturer: sasib beverage s.p.a., italy
type: simonazzi gripping duplex
year made: 1998
depalletizer serial no: ibc115-1262
palletizer serial no: ibc116-1263   CRATE PALLETIZING AND DEPALLETIZING STATION SIMONAZZI YEAR 1998 THIS PALLETIZING AND DEPALLETIZING STATION WAS BUILT BY SASIB IN 1998. THE SYSTEM WAS USED FOR UNLOADING EMPTY BOTTLE CRATES FROM PALLETS AND LOADING FULL BOTTLE CRATES ON PALLETS. THIS SYSTEM WAS WORKING FOR A BEER FILLING LINE WITH TOTAL CAPACITY OF 80.000 BPH. THE SYSTEM INCLUDES ONE DUBLEX DEPALLETIZER, ONE DUBLEX PALLETIZER, A FAULTY PALLET (PROTRUDING NAILS, INCORRECT SIZE ETC) DETECTION AND REJECTION SYSTEM, TWO PALLET MAGAZINES AND PALLET CONVEYORS. CRATES ARE TRANSPORTED VIA CONVEYOR BELTS AND TURNED INTO PROPER ORIENTATION IN A POSITIONING TABLE IN EACH LINE. THE LINE IS STILL INSTALLED IN A FAIR CONDITION. MANUFACTURER: SASIB BEVERAGE S.P.A., ITALY TYPE: SIMONAZZI GRIPPING DUPLEX YEAR MADE: 1998 DEPALLETIZER SERIAL NO: IBC115-1262 PALLETIZER SERIAL NO: IBC116-1263
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-type hv-3000, conical mixer (1x), material stainless steel , capacity 3000 ltr, largest cone diameter 2292mm, cone height 3200mm, with stainless steel arm , top drive , motor 5,5 kw, 380 volt, bottom bearing pintle bearing , bottom discharge , outlet with sliding valve , suitable for liquid injection , weight 1200 kg, extra specifications -- brand new conical mixer -- delivery time 20-24 weeks legs can be delivered at extra costs - arm 2 rpm - screw 60 rpmconical mixersmixers > conical mixers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! TYPE HV-3000, CONICAL MIXER (1X), MATERIAL STAINLESS STEEL , CAPACITY 3000 LTR, LARGEST CONE DIAMETER 2292MM, CONE HEIGHT 3200MM, WITH STAINLESS STEEL ARM , TOP DRIVE , MOTOR 5,5 KW, 380 VOLT, BOTTOM BEARING PINTLE BEARING , BOTTOM DISCHARGE , OUTLET WITH SLIDING VALVE , SUITABLE FOR LIQUID INJECTION , WEIGHT 1200 KG, EXTRA SPECIFICATIONS -- BRAND NEW CONICAL MIXER -- DELIVERY TIME 20-24 WEEKS LEGS CAN BE DELIVERED AT EXTRA COSTS - ARM 2 RPM - SCREW 60 RPMCONICAL MIXERSMIXERS > CONICAL MIXERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-crate packer kettner blitzpac junior

a crate packer made by kettner in 1999. this machine loads and unloads bottle crates. used to work with 0.5 liter bottles and 24 bottle crates. the equipment is currently dismantled and in a warehouse.

manufacturer: kettner gmbh
type: blitzpac junior e 3 t
year: 1999
capacity: 300 loads / hour
electricity: 3 x 380 v – 50 hz
control voltage: 24 v dc   CRATE PACKER KETTNER BLITZPAC JUNIOR A CRATE PACKER MADE BY KETTNER IN 1999. THIS MACHINE LOADS AND UNLOADS BOTTLE CRATES. USED TO WORK WITH 0.5 LITER BOTTLES AND 24 BOTTLE CRATES. THE EQUIPMENT IS CURRENTLY DISMANTLED AND IN A WAREHOUSE. MANUFACTURER: KETTNER GMBH TYPE: BLITZPAC JUNIOR E 3 T YEAR: 1999 CAPACITY: 300 LOADS / HOUR ELECTRICITY: 3 X 380 V – 50 HZ CONTROL VOLTAGE: 24 V DC
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-type hv-1500, conical mixer (1x), material stainless steel , capacity 1500 ltr, largest cone diameter 1753mm, cone height 2500mm, with stainless steel arm , top drive , motor 4 kw, 380 volt, 1400 rpm, bottom bearing pintle bearing , outlet with sliding valve , suitable for liquid injection , extra specifications -- new -- delivery time: 20-24 weeks legs can be delivered at extra costsconical mixersmixers > conical mixers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! TYPE HV-1500, CONICAL MIXER (1X), MATERIAL STAINLESS STEEL , CAPACITY 1500 LTR, LARGEST CONE DIAMETER 1753MM, CONE HEIGHT 2500MM, WITH STAINLESS STEEL ARM , TOP DRIVE , MOTOR 4 KW, 380 VOLT, 1400 RPM, BOTTOM BEARING PINTLE BEARING , OUTLET WITH SLIDING VALVE , SUITABLE FOR LIQUID INJECTION , EXTRA SPECIFICATIONS -- NEW -- DELIVERY TIME: 20-24 WEEKS LEGS CAN BE DELIVERED AT EXTRA COSTSCONICAL MIXERSMIXERS > CONICAL MIXERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-crate unloading and loading system with abb industrial robots

automatic robot packaging system made by sasib in 1998. the system is used for loading bottles in crates with the maximum capacity of 80.000 bph. it includes six floor-mounted robots and a control unit. the robots are made by abb in 1998 and they are refurbished in 2010/2011. production was stopped about one year after this refurbishment and therefore abb robots are in good working order. abb irb 6400 robots have a 6-axis movement, a reach of 2.4 meters and maximum handling capacity of 200 kg. system includes complete conveyor systems and gripping tools for the robots.

system manufacturer: sasib s.p.a., italy
system model: robokombi deca 5-5t
serial number: ibh 005 1226
crate loading capacity: 80 000 bph
crate unloading capacity: 20 000 bph

robot manufacturer: abb robotics products ab, sweden
robot type: irb6400 m97a
version: irb6400/2.4-200
year of manufacture: 1998
number of robots 6 pcs
payload capacity up to 200 kg
serial number: 64-06736
voltage: 3 x 400 v, 50 – 60 hz
electric power: 7.2 kva
maximum reach: 2.4 m
manipulator weight: 2.050 kg
controller weight: 250 kg
axes: 6
axis velocities: 90 – 190 °/s, depending on axis
axis velocity resolution: approx. 0.01 °/s each axis   CRATE UNLOADING AND LOADING SYSTEM WITH ABB INDUSTRIAL ROBOTS AUTOMATIC ROBOT PACKAGING SYSTEM MADE BY SASIB IN 1998. THE SYSTEM IS USED FOR LOADING BOTTLES IN CRATES WITH THE MAXIMUM CAPACITY OF 80.000 BPH. IT INCLUDES SIX FLOOR-MOUNTED ROBOTS AND A CONTROL UNIT. THE ROBOTS ARE MADE BY ABB IN 1998 AND THEY ARE REFURBISHED IN 2010/2011. PRODUCTION WAS STOPPED ABOUT ONE YEAR AFTER THIS REFURBISHMENT AND THEREFORE ABB ROBOTS ARE IN GOOD WORKING ORDER. ABB IRB 6400 ROBOTS HAVE A 6-AXIS MOVEMENT, A REACH OF 2.4 METERS AND MAXIMUM HANDLING CAPACITY OF 200 KG. SYSTEM INCLUDES COMPLETE CONVEYOR SYSTEMS AND GRIPPING TOOLS FOR THE ROBOTS. SYSTEM MANUFACTURER: SASIB S.P.A., ITALY SYSTEM MODEL: ROBOKOMBI DECA 5-5T SERIAL NUMBER: IBH 005 1226 CRATE LOADING CAPACITY: 80 000 BPH CRATE UNLOADING CAPACITY: 20 000 BPH ROBOT MANUFACTURER: ABB ROBOTICS PRODUCTS AB, SWEDEN ROBOT TYPE: IRB6400 M97A VERSION: IRB6400/2.4-200 YEAR OF MANUFACTURE: 1998 NUMBER OF ROBOTS 6 PCS PAYLOAD CAPACITY UP TO 200 KG SERIAL NUMBER: 64-06736 VOLTAGE: 3 X 400 V, 50 – 60 HZ ELECTRIC POWER: 7.2 KVA MAXIMUM REACH: 2.4 M MANIPULATOR WEIGHT: 2.050 KG CONTROLLER WEIGHT: 250 KG AXES: 6 AXIS VELOCITIES: 90 – 190 °/S, DEPENDING ON AXIS AXIS VELOCITY RESOLUTION: APPROX. 0.01 °/S EACH AXIS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-type hv-1000, extra specifications delivery time: 20-24 weeks -- new -- legs can be delivered at extra costs - arm 2 rpm - screw 60 rpm , conical mixer (1x), material stainless steel , capacity 1000 ltr, largest cone diameter 1672 mm, cone height 2184 mm, top drive , motor 3,0 kw, 380 volt, bottom bearing pintle bearing , bottom discharge , suitable for liquid injectionconical mixersmixers > conical mixers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! TYPE HV-1000, EXTRA SPECIFICATIONS DELIVERY TIME: 20-24 WEEKS -- NEW -- LEGS CAN BE DELIVERED AT EXTRA COSTS - ARM 2 RPM - SCREW 60 RPM , CONICAL MIXER (1X), MATERIAL STAINLESS STEEL , CAPACITY 1000 LTR, LARGEST CONE DIAMETER 1672 MM, CONE HEIGHT 2184 MM, TOP DRIVE , MOTOR 3,0 KW, 380 VOLT, BOTTOM BEARING PINTLE BEARING , BOTTOM DISCHARGE , SUITABLE FOR LIQUID INJECTIONCONICAL MIXERSMIXERS > CONICAL MIXERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-cct fermenting tank 10 x 1200 hl dizio

conical cone fermenting tanks (cct) with gross capacity 1200 hl and net 1016 hl. all tanks are identical, made by italian dizio costruccioni meccaniche s.p.a - all made in year 1987. tanks are vertical outdoor type with 150 mm pu insulation, designed for seismic zone 2, supported from the bottom ring (no legs), with three (glycol) cooling zones, two on the side + cone. tanks have mechanical cooling control as well as product handling valve system. generally tanks are in good condition and they have a high hygienic level.

technical data
made by: dizio
made in year: 1987
number of tanks: 10 pcs
type: outdoor vertical
insulation: 150 mm pu
volume gross / net: 1200 / 1016 hl
design pressure: 1.5 bar + statistical pressure
cooling media: glycol - water solution
cooling zones: 3 (including cone)
tank inner diameter: 4800 mm
total height: approx 10.5 m   CCT FERMENTING TANK 10 X 1200 HL DIZIO CONICAL CONE FERMENTING TANKS (CCT) WITH GROSS CAPACITY 1200 HL AND NET 1016 HL. ALL TANKS ARE IDENTICAL, MADE BY ITALIAN DIZIO COSTRUCCIONI MECCANICHE S.P.A - ALL MADE IN YEAR 1987. TANKS ARE VERTICAL OUTDOOR TYPE WITH 150 MM PU INSULATION, DESIGNED FOR SEISMIC ZONE 2, SUPPORTED FROM THE BOTTOM RING (NO LEGS), WITH THREE (GLYCOL) COOLING ZONES, TWO ON THE SIDE + CONE. TANKS HAVE MECHANICAL COOLING CONTROL AS WELL AS PRODUCT HANDLING VALVE SYSTEM. GENERALLY TANKS ARE IN GOOD CONDITION AND THEY HAVE A HIGH HYGIENIC LEVEL. TECHNICAL DATA MADE BY: DIZIO MADE IN YEAR: 1987 NUMBER OF TANKS: 10 PCS TYPE: OUTDOOR VERTICAL INSULATION: 150 MM PU VOLUME GROSS / NET: 1200 / 1016 HL DESIGN PRESSURE: 1.5 BAR + STATISTICAL PRESSURE COOLING MEDIA: GLYCOL - WATER SOLUTION COOLING ZONES: 3 (INCLUDING CONE) TANK INNER DIAMETER: 4800 MM TOTAL HEIGHT: APPROX 10.5 M
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-type hv-600, floor space dia. 1.6 m, total height 3.52 m, extra specifications -- brand new conical mixer -- delivery time: 20-24 weeks legs can be delivered at extra costs , conical mixer (1x), material stainless steel , capacity 600 ltr, largest cone diameter 1492 mm, cone height 1844 mm, top drive , motor 3,0 kw, 400 volt, bottom bearing pintle bearing , bottom discharge , outlet with sliding valve , suitable for liquid injectionconical mixersmixers > conical mixers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! TYPE HV-600, FLOOR SPACE DIA. 1.6 M, TOTAL HEIGHT 3.52 M, EXTRA SPECIFICATIONS -- BRAND NEW CONICAL MIXER -- DELIVERY TIME: 20-24 WEEKS LEGS CAN BE DELIVERED AT EXTRA COSTS , CONICAL MIXER (1X), MATERIAL STAINLESS STEEL , CAPACITY 600 LTR, LARGEST CONE DIAMETER 1492 MM, CONE HEIGHT 1844 MM, TOP DRIVE , MOTOR 3,0 KW, 400 VOLT, BOTTOM BEARING PINTLE BEARING , BOTTOM DISCHARGE , OUTLET WITH SLIDING VALVE , SUITABLE FOR LIQUID INJECTIONCONICAL MIXERSMIXERS > CONICAL MIXERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-fermenting tank cct 910 hl holvrieka / dizio

conical cone fermenting tanks (cct) with gross capacity 910 hl and net 800 hl. all tanks are identical, made either by hovrieka or by italian dizio costruccioni meccaniche s.p.a - all made in year 1987. tanks are vertical outdoor type with 150 mm pu insulation, designed for seismic zone 2, supported from the bottom ring (no legs), with three (glycol) cooling zones, two on the side + cone. tanks have mechanical cooling control as well as product handling valve system and outside on tank skirt, there are two sample taking valves. the cones has been refurbished / modernized by changing sample taking valve and adding level sensor. generally tanks are in good condition and they have a high hygienic level.

technical data
made by: holvrieka / dizio
made in year: 1987
number of tanks: 36 pcs
type: outdoor vertical
insulation: 150 mm pu
volume gross / net: 910 / 800 hl
design pressure: 1.5 bar + statistical pressure
cooling media: glycol - water solution
cooling zones: 3 (including cone)
tank inner diameter: 4800 mm
total height: 9775 mm   FERMENTING TANK CCT 910 HL HOLVRIEKA / DIZIO CONICAL CONE FERMENTING TANKS (CCT) WITH GROSS CAPACITY 910 HL AND NET 800 HL. ALL TANKS ARE IDENTICAL, MADE EITHER BY HOVRIEKA OR BY ITALIAN DIZIO COSTRUCCIONI MECCANICHE S.P.A - ALL MADE IN YEAR 1987. TANKS ARE VERTICAL OUTDOOR TYPE WITH 150 MM PU INSULATION, DESIGNED FOR SEISMIC ZONE 2, SUPPORTED FROM THE BOTTOM RING (NO LEGS), WITH THREE (GLYCOL) COOLING ZONES, TWO ON THE SIDE + CONE. TANKS HAVE MECHANICAL COOLING CONTROL AS WELL AS PRODUCT HANDLING VALVE SYSTEM AND OUTSIDE ON TANK SKIRT, THERE ARE TWO SAMPLE TAKING VALVES. THE CONES HAS BEEN REFURBISHED / MODERNIZED BY CHANGING SAMPLE TAKING VALVE AND ADDING LEVEL SENSOR. GENERALLY TANKS ARE IN GOOD CONDITION AND THEY HAVE A HIGH HYGIENIC LEVEL. TECHNICAL DATA MADE BY: HOLVRIEKA / DIZIO MADE IN YEAR: 1987 NUMBER OF TANKS: 36 PCS TYPE: OUTDOOR VERTICAL INSULATION: 150 MM PU VOLUME GROSS / NET: 910 / 800 HL DESIGN PRESSURE: 1.5 BAR + STATISTICAL PRESSURE COOLING MEDIA: GLYCOL - WATER SOLUTION COOLING ZONES: 3 (INCLUDING CONE) TANK INNER DIAMETER: 4800 MM TOTAL HEIGHT: 9775 MM
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-type hv-300, new nieuw, weight 650 kg, extra specifications -- brand new conical mixer -- delivery time 20-24 weeks legs can be delivered at extra costs , conical mixer (1x), material stainless steel , capacity 300 ltr., largest cone diameter 1300 mm, cone height 1530 mm, top drive , motor 3 kw, 400 volt, bottom bearing pintle bearing , bottom discharge , outlet with sliding valve , suitable for liquid injectionconical mixersmixers > conical mixers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! TYPE HV-300, NEW NIEUW, WEIGHT 650 KG, EXTRA SPECIFICATIONS -- BRAND NEW CONICAL MIXER -- DELIVERY TIME 20-24 WEEKS LEGS CAN BE DELIVERED AT EXTRA COSTS , CONICAL MIXER (1X), MATERIAL STAINLESS STEEL , CAPACITY 300 LTR., LARGEST CONE DIAMETER 1300 MM, CONE HEIGHT 1530 MM, TOP DRIVE , MOTOR 3 KW, 400 VOLT, BOTTOM BEARING PINTLE BEARING , BOTTOM DISCHARGE , OUTLET WITH SLIDING VALVE , SUITABLE FOR LIQUID INJECTIONCONICAL MIXERSMIXERS > CONICAL MIXERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-injection molding machine husky hylectric h300 for pet bottle closures
 
two complete pet bottle cap production lines both equipped with husky hylectric h300 injection molding machines. both production lines include italian plastic systems made granule pneumatic transport, mixing and feeding systems as well as green box made cap cooling drums. equipment was manufactured in year 2006 is designed to produce 28 mm pet caps according to standard light bpf 28 mm at speed of 36 000 caps / hour. both machines were stopped in 2014 but are still installed and powered.
 
technical data
 
machine #1 type: husky h300, rs95/80, ser. ?2853225
manufacturing year 2006, total operating hours 44918
mold no1 corvaglia 64 cavity no 28-22-21-1 air cooled

machine #2 type: husky h300, rs80/70, ser. ?3372564
manufacturing year 2006, total operating hours 57790
mold no 2 corvaglia 64 cavity no 103-a-st water cooled

cap format bpf 28 mm
cycle time: 6.3 seconds
capacity 36 000 cap / h
control system: beckfoff industrial pc
mmi polaris ttc 2100 with touch screen   INJECTION MOLDING MACHINE HUSKY HYLECTRIC H300 FOR PET BOTTLE CLOSURES TWO COMPLETE PET BOTTLE CAP PRODUCTION LINES BOTH EQUIPPED WITH HUSKY HYLECTRIC H300 INJECTION MOLDING MACHINES. BOTH PRODUCTION LINES INCLUDE ITALIAN PLASTIC SYSTEMS MADE GRANULE PNEUMATIC TRANSPORT, MIXING AND FEEDING SYSTEMS AS WELL AS GREEN BOX MADE CAP COOLING DRUMS. EQUIPMENT WAS MANUFACTURED IN YEAR 2006 IS DESIGNED TO PRODUCE 28 MM PET CAPS ACCORDING TO STANDARD LIGHT BPF 28 MM AT SPEED OF 36 000 CAPS / HOUR. BOTH MACHINES WERE STOPPED IN 2014 BUT ARE STILL INSTALLED AND POWERED. TECHNICAL DATA MACHINE #1 TYPE: HUSKY H300, RS95/80, SER. ?2853225 MANUFACTURING YEAR 2006, TOTAL OPERATING HOURS 44918 MOLD NO1 CORVAGLIA 64 CAVITY NO 28-22-21-1 AIR COOLED MACHINE #2 TYPE: HUSKY H300, RS80/70, SER. ?3372564 MANUFACTURING YEAR 2006, TOTAL OPERATING HOURS 57790 MOLD NO 2 CORVAGLIA 64 CAVITY NO 103-A-ST WATER COOLED CAP FORMAT BPF 28 MM CYCLE TIME: 6.3 SECONDS CAPACITY 36 000 CAP / H CONTROL SYSTEM: BECKFOFF INDUSTRIAL PC MMI POLARIS TTC 2100 WITH TOUCH SCREEN
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 15500; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 350 ; GROSS WEIGHT [KG]: 15500; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 350
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-pet bottle filling line for beer and csd krones 22 000 bph with mixer

this complete pet bottle filling line was delivered by krones in year 2002 and it was in operation till 2015. the equipment is designed for beer and carbonated soft drinks and it has been filling the product in to 0.5, 1.5 and 2.0 liter pet bottles. line has a soft drink mixer. all equipment has siemens simatic s7 serie plc controls. line is complete with pet compressor and beverage mixer and it is still installed and powered and in good condition.

main characteristics of this line:
manufacturer: krones ag
capacity: 22 000 bph in 1.5 liter pet
20 000 bph in 2.0 liter pet
28 000 bph in 0.5 liter pet
operation started in year: 2002
operation stopped in year: 2015
container sizes used: 0.5, 1.5 and 2.0 liters
neck standard: pco 1810 - 28 mm
labels: film, hot glue, wrap around + front-back-neck
delivery package format: 3 x 4 shrink wrapped   PET BOTTLE FILLING LINE FOR BEER AND CSD KRONES 22 000 BPH WITH MIXER THIS COMPLETE PET BOTTLE FILLING LINE WAS DELIVERED BY KRONES IN YEAR 2002 AND IT WAS IN OPERATION TILL 2015. THE EQUIPMENT IS DESIGNED FOR BEER AND CARBONATED SOFT DRINKS AND IT HAS BEEN FILLING THE PRODUCT IN TO 0.5, 1.5 AND 2.0 LITER PET BOTTLES. LINE HAS A SOFT DRINK MIXER. ALL EQUIPMENT HAS SIEMENS SIMATIC S7 SERIE PLC CONTROLS. LINE IS COMPLETE WITH PET COMPRESSOR AND BEVERAGE MIXER AND IT IS STILL INSTALLED AND POWERED AND IN GOOD CONDITION. MAIN CHARACTERISTICS OF THIS LINE: MANUFACTURER: KRONES AG CAPACITY: 22 000 BPH IN 1.5 LITER PET 20 000 BPH IN 2.0 LITER PET 28 000 BPH IN 0.5 LITER PET OPERATION STARTED IN YEAR: 2002 OPERATION STOPPED IN YEAR: 2015 CONTAINER SIZES USED: 0.5, 1.5 AND 2.0 LITERS NECK STANDARD: PCO 1810 - 28 MM LABELS: FILM, HOT GLUE, WRAP AROUND + FRONT-BACK-NECK DELIVERY PACKAGE FORMAT: 3 X 4 SHRINK WRAPPED
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 15500; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 350 ; GROSS WEIGHT [KG]: 15500; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 350
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-empty bottle inspector heuft inline ebi with reflexx and spectrum tx units
 
the machine was installed in year 2007 and its currently in very good operational condition. the capacity is 72 000 bph. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. it has heuft pilot cd manuals in english
 
this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.
 
sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.
 
the ebi has optical heuft thread detection system which inspects the screw closure finish on a glass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.
 
this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.
 
technical data:
manufacturer: heuft gmbh, germany
year: 2007
type: heuft spectrum tx inline ebi with reflexx image processing and heuft syncron system
capacity: 72 000 bph
reliability: 99.9 % detection complete heuft manuals in english.   EMPTY BOTTLE INSPECTOR HEUFT INLINE EBI WITH REFLEXX AND SPECTRUM TX UNITS THE MACHINE WAS INSTALLED IN YEAR 2007 AND ITS CURRENTLY IN VERY GOOD OPERATIONAL CONDITION. THE CAPACITY IS 72 000 BPH. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. IT HAS HEUFT PILOT CD MANUALS IN ENGLISH THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON A GLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 2007 TYPE: HEUFT SPECTRUM TX INLINE EBI WITH REFLEXX IMAGE PROCESSING AND HEUFT SYNCRON SYSTEM CAPACITY: 72 000 BPH RELIABILITY: 99.9 % DETECTION COMPLETE HEUFT MANUALS IN ENGLISH.
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 39.500 €
Ubicación: Land-; gross weight [kg]: 21100; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 250 ; GROSS WEIGHT [KG]: 21100; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 250
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-bottle washing machine khs innoclean ee52/87 s22n, 70 000 bph
 
single end bottle washing machine by khs innoclean, manufactured in year 2000 with two pre-cleaning section, two caustic zones and three fresh water rinsing zones. nominal capacity is 70 000 bph and this machine used for 0.5 liter of glass bottles, but also it can be used for 0.33 liter bottles. the machine is stopped in year 2015 and in 2016 of november will be dismantled and packed.
the equipment is in good condition and ready to delivery.
 
manufacturer: khs
manufacturer type: innoclean ee52/87 s22n
year of manufacturing: 2000
capacity: 70 000 bph
total operating hours: 95 000
control plc: siemens simatic s7
 
general data
 
nominal performance: 70 000 bph
adjustable performance: min / max 25 5000 – 71 500 bph
number of holders of bottle cells total: 327 / 317 pcs.
number of bottle in a row: 52 pcs.
chain step: 135 mm.
magazine step: 87 mm.
number of bottles in the machine: 17 004 pcs.
bottle diameter min / max: 53 – 72,5 mm.
bottle height min / max: 135 – 280 mm.
 
machine size
 
the width of the machine body: 4 834 mm.
machine width (full) (plug-in sieve): 7 970 mm.
length of machine: 16 500 mm.
height of machine: 3 500 mm.
machine empty weight: 64 tons
machine operating weight: 135 tons
number of supports: 41 pcs.
 
consumption figures
 
temperature alkali: 80 °c
water consumption, total: 14,95 m3/h.
heat consumption: 629 kwh
electric connection: 90,3 kw.   BOTTLE WASHING MACHINE KHS INNOCLEAN EE52/87 S22N, 70 000 BPH SINGLE END BOTTLE WASHING MACHINE BY KHS INNOCLEAN, MANUFACTURED IN YEAR 2000 WITH TWO PRE-CLEANING SECTION, TWO CAUSTIC ZONES AND THREE FRESH WATER RINSING ZONES. NOMINAL CAPACITY IS 70 000 BPH AND THIS MACHINE USED FOR 0.5 LITER OF GLASS BOTTLES, BUT ALSO IT CAN BE USED FOR 0.33 LITER BOTTLES. THE MACHINE IS STOPPED IN YEAR 2015 AND IN 2016 OF NOVEMBER WILL BE DISMANTLED AND PACKED. THE EQUIPMENT IS IN GOOD CONDITION AND READY TO DELIVERY. MANUFACTURER: KHS MANUFACTURER TYPE: INNOCLEAN EE52/87 S22N YEAR OF MANUFACTURING: 2000 CAPACITY: 70 000 BPH TOTAL OPERATING HOURS: 95 000 CONTROL PLC: SIEMENS SIMATIC S7 GENERAL DATA NOMINAL PERFORMANCE: 70 000 BPH ADJUSTABLE PERFORMANCE: MIN / MAX 25 5000 – 71 500 BPH NUMBER OF HOLDERS OF BOTTLE CELLS TOTAL: 327 / 317 PCS. NUMBER OF BOTTLE IN A ROW: 52 PCS. CHAIN STEP: 135 MM. MAGAZINE STEP: 87 MM. NUMBER OF BOTTLES IN THE MACHINE: 17 004 PCS. BOTTLE DIAMETER MIN / MAX: 53 – 72,5 MM. BOTTLE HEIGHT MIN / MAX: 135 – 280 MM. MACHINE SIZE THE WIDTH OF THE MACHINE BODY: 4 834 MM. MACHINE WIDTH (FULL) (PLUG-IN SIEVE): 7 970 MM. LENGTH OF MACHINE: 16 500 MM. HEIGHT OF MACHINE: 3 500 MM. MACHINE EMPTY WEIGHT: 64 TONS MACHINE OPERATING WEIGHT: 135 TONS NUMBER OF SUPPORTS: 41 PCS. CONSUMPTION FIGURES TEMPERATURE ALKALI: 80 °C WATER CONSUMPTION, TOTAL: 14,95 M3/H. HEAT CONSUMPTION: 629 KWH ELECTRIC CONNECTION: 90,3 KW.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 2575; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 2575; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-glass bottle filling line 55 000 bph simonazzi / krones for beer with bwm
 
complete returnable glass bottle filling line, nominal capacity of 55 000 bph in 0.5-liter glass bottle. main machinery from krones and simonazzi. the line was installed in 2002 and modernized during the entire time of used, like closed conveyor system in year 2013. empty bottle inspector and level & sealing inspector in year 2007. the line was stopped in year 2014 and it is still installed and powered. line is controlled with siemens simatic s7 plc. equipment is in good condition and very well maintained and it has complete documentation in english.
 
main characteristics of this line
 
main manufacturers krones and sig simonazzi
made in years 2002 - 2007
returnable bottles 0.33 and 0.5 liter glass bottles
product used for beer
capacity 55 000 bph in 0.5 liter bottles
caps crown and ring pull
labels paper front-back-neck
secondary packaging tray format 5 x 4 with shrink plastic  GLASS BOTTLE FILLING LINE 55 000 BPH SIMONAZZI / KRONES FOR BEER WITH BWM COMPLETE RETURNABLE GLASS BOTTLE FILLING LINE, NOMINAL CAPACITY OF 55 000 BPH IN 0.5-LITER GLASS BOTTLE. MAIN MACHINERY FROM KRONES AND SIMONAZZI. THE LINE WAS INSTALLED IN 2002 AND MODERNIZED DURING THE ENTIRE TIME OF USED, LIKE CLOSED CONVEYOR SYSTEM IN YEAR 2013. EMPTY BOTTLE INSPECTOR AND LEVEL & SEALING INSPECTOR IN YEAR 2007. THE LINE WAS STOPPED IN YEAR 2014 AND IT IS STILL INSTALLED AND POWERED. LINE IS CONTROLLED WITH SIEMENS SIMATIC S7 PLC. EQUIPMENT IS IN GOOD CONDITION AND VERY WELL MAINTAINED AND IT HAS COMPLETE DOCUMENTATION IN ENGLISH. MAIN CHARACTERISTICS OF THIS LINE MAIN MANUFACTURERS KRONES AND SIG SIMONAZZI MADE IN YEARS 2002 - 2007 RETURNABLE BOTTLES 0.33 AND 0.5 LITER GLASS BOTTLES PRODUCT USED FOR BEER CAPACITY 55 000 BPH IN 0.5 LITER BOTTLES CAPS CROWN AND RING PULL LABELS PAPER FRONT-BACK-NECK SECONDARY PACKAGING TRAY FORMAT 5 X 4 WITH SHRINK PLASTIC
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 830; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 830; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-labelling machine khs innoket kl 2090/120 – 60

labelling machine by khs innoket kl 2090/120 – 60, manufactured in year 2005 and was stopped in year 2015. this labelling machine can be equipped with four of the same or different type labelling stations. currently it has two labelling system for paper labels with cold glue and additionally there are three stations for self-adhesive labels. machine it has been used for glass bottles front/back/neck labels. capacity for paper labels is 66 000 bph and for self-adhesive labels is 40 000 bph. controlled by siemens s7 plc. equipment is in very good condition.

technical specifications:

manufacturer: khs
machine type: innoket kl 2090/120 – 60
manufacturer year: 2005
ready cut paper labels, hot clue: 66 000 bph
self adhesive plastic labels: 40 000 bph
pitch: 120 mm
number of bottle turrets: 60 pcs.
carousel diameter: 2360 mm.
label positions: front, back, neck
label lengths: 140 mm.   LABELLING MACHINE KHS INNOKET KL 2090/120 – 60 LABELLING MACHINE BY KHS INNOKET KL 2090/120 – 60, MANUFACTURED IN YEAR 2005 AND WAS STOPPED IN YEAR 2015. THIS LABELLING MACHINE CAN BE EQUIPPED WITH FOUR OF THE SAME OR DIFFERENT TYPE LABELLING STATIONS. CURRENTLY IT HAS TWO LABELLING SYSTEM FOR PAPER LABELS WITH COLD GLUE AND ADDITIONALLY THERE ARE THREE STATIONS FOR SELF-ADHESIVE LABELS. MACHINE IT HAS BEEN USED FOR GLASS BOTTLES FRONT/BACK/NECK LABELS. CAPACITY FOR PAPER LABELS IS 66 000 BPH AND FOR SELF-ADHESIVE LABELS IS 40 000 BPH. CONTROLLED BY SIEMENS S7 PLC. EQUIPMENT IS IN VERY GOOD CONDITION. TECHNICAL SPECIFICATIONS: MANUFACTURER: KHS MACHINE TYPE: INNOKET KL 2090/120 – 60 MANUFACTURER YEAR: 2005 READY CUT PAPER LABELS, HOT CLUE: 66 000 BPH SELF ADHESIVE PLASTIC LABELS: 40 000 BPH PITCH: 120 MM NUMBER OF BOTTLE TURRETS: 60 PCS. CAROUSEL DIAMETER: 2360 MM. LABEL POSITIONS: FRONT, BACK, NECK LABEL LENGTHS: 140 MM.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 830; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 830; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-alligator shears rsm. 440

â?¢ with manual clamp
â?¢ use four knives
â?¢ plug-in profiles for forklift trucks
â?¢ operation by means of fuã?pedal#

technical data
model: rsm. 440
overall dimensions: 1750 x 762 x 1500 mm
total weight: 810 kg
blade length: 440 mm
max blade opening: 50-255 mm
cutting force: 100 t
cutting capacity: rods 50 mm (st 37)
main drive: 3 phase: 7.5 kw (10 hp)
cutting strokes p/min: 10-50 / min
 ALLIGATOR SHEARS RSM. 440 Â?¢ WITH MANUAL CLAMP Â?¢ USE FOUR KNIVES Â?¢ PLUG-IN PROFILES FOR FORKLIFT TRUCKS Â?¢ OPERATION BY MEANS OF FUÃ?PEDAL# TECHNICAL DATA MODEL: RSM. 440 OVERALL DIMENSIONS: 1750 X 762 X 1500 MM TOTAL WEIGHT: 810 KG BLADE LENGTH: 440 MM MAX BLADE OPENING: 50-255 MM CUTTING FORCE: 100 T CUTTING CAPACITY: RODS 50 MM (ST 37) MAIN DRIVE: 3 PHASE: 7.5 KW (10 HP) CUTTING STROKES P/MIN: 10-50 / MIN
Vendedor: AGICOM-Pedergnana OG
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: used machinery auction RESALE 30.000 €
Ubicación: Land-
Vendedor: Intergavel
Año de construcción: usado
Precio: 18.900 €
Ubicación: Land-; gross weight [kg]: 11710; rear tyres remaining: 30; front tyres remaining: 30; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 11710; REAR TYRES REMAINING: 30; FRONT TYRES REMAINING: 30; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-polytype bdm-301 r uvb (square cup)
power: 80-120 cups / min
colours :			6 for cup pressure + 2 for cup bottom pressure
equipment / additional information / line consists of:
• stacker
• cup feeding
• polytype bdm-301 r uvb // 6 colors
• ground pressure machine // 2 colors
• uv dryer
• transport and feed belts
• stapler
corona pretreatment
max. cup size: 119x119x120 = up to approx. 1.5 liters
  POLYTYPE BDM-301 R UVB (SQUARE CUP) POWER: 80-120 CUPS / MIN COLOURS : 6 FOR CUP PRESSURE + 2 FOR CUP BOTTOM PRESSURE EQUIPMENT / ADDITIONAL INFORMATION / LINE CONSISTS OF: • STACKER • CUP FEEDING • POLYTYPE BDM-301 R UVB // 6 COLORS • GROUND PRESSURE MACHINE // 2 COLORS • UV DRYER • TRANSPORT AND FEED BELTS • STAPLER CORONA PRETREATMENT MAX. CUP SIZE: 119X119X120 = UP TO APPROX. 1.5 LITERS
Vendedor: MJS-LINE GmbH
Año de construcción: usado
Precio: 18.900 €
Ubicación: Land-; gross weight [kg]: 11710; rear tyres remaining: 30; front tyres remaining: 30; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 11710; REAR TYRES REMAINING: 30; FRONT TYRES REMAINING: 30; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-bottle formats: 0.125/ 0.2/ 0.5/ 0.75l, bottle shape: various, operational hours: ca. 35,000h.  BOTTLE FORMATS: 0.125/ 0.2/ 0.5/ 0.75L, BOTTLE SHAPE: VARIOUS, OPERATIONAL HOURS: CA. 35,000H.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 1.380 €
Ubicación: Land-slot boring machine schelling bm 2

drilling depth of 150 mm
height of 190 mm
sideways (transverse adjustment) 300 mm
table size l x w 660 x 320 mm quick-clamping device for drill ã? 1-20 mm
motor output 1,5 kw
motor 1,1 kw
spindle speeds 2000 or 4000 rpm spindle speeds 3000/ 6000 rpm drill depth scale drill elevation scale working height 880 mm
dimensions w x d x h 700 x 800 x 1300 mm
weight ca. 280 kg
built in 1992

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 
 SLOT BORING MACHINE SCHELLING BM 2 DRILLING DEPTH OF 150 MM HEIGHT OF 190 MM SIDEWAYS (TRANSVERSE ADJUSTMENT) 300 MM TABLE SIZE L X W 660 X 320 MM QUICK-CLAMPING DEVICE FOR DRILL Ã? 1-20 MM MOTOR OUTPUT 1,5 KW MOTOR 1,1 KW SPINDLE SPEEDS 2000 OR 4000 RPM SPINDLE SPEEDS 3000/ 6000 RPM DRILL DEPTH SCALE DRILL ELEVATION SCALE WORKING HEIGHT 880 MM DIMENSIONS W X D X H 700 X 800 X 1300 MM WEIGHT CA. 280 KG BUILT IN 1992 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-cassette for warehouse, about 1,539 cassettes, cassette length 6, 50 m, 3, 000 kg/kasstte - used -:
 
price on request!
 
manufacturer: fehr
year of construction: 2001
cassettes ges. 1,539 units
specification
1 electrically operated double table long good stack machine, automatically controlled, for the storage and retrieval of for good material, with the help of cassettes
technical data:
capacity 2x3000kg
bottom load table position above ground 700 mm
top load table position above ground 12110 mm
room height 13'450 mm
lifting speed 35 m / min
travel speed 80 m / min
pull-out speed 85 m / min
operating voltage, three-phase 400 v / 50 hz
control voltage 230 v / 50 hz
24 v dc
cassette type internal dimensions (wxhxl) a 520 x 270 x 6500 mm
type b 520 x 520 x 6500 mm
device performance at 100% load 46 ds / h
according to fem based on ub-3000 9.851
pull-out force on the cassette gripper (20% of the payload plus cartridge weight)
 
control automatically arranged using an automatic control over operating terminal, at the camp office
1. 1 double-sided track, length approx 29 m
to hang up on the concrete floor, consisting of:
the two rails of a 55, with the shocks, complete with attachment fittings and the limit stops. the rails are with fade-free special grout under poured.
2. 1 longitudinal-power supply, length approx 29 m, consisting of:
vahle plastic conductor line, with guard, complete with the mounting brackets.
3. 1 long goods stacking devices, consisting of:
camp 2 head straps welded design, with the chassis, this consisting of wã¤lzge controlled from the two engines with shaft mounted gearboxes built-on, as well as the 4 - crane wheels, with leadership roles, running laterally on the road,
2 columns in welded box construction, with the guides for the lifters from material performed st 52.3, screwed on the head straps, including the stiffening frame, as well as a ladder of descent,.
1 pallet truck, consisting of: the steel construction with the necessary rubber buffers for the two hã¶henend positions, the roller bearing support and leadership roles, the double cassette table with glides, the extractor, the centering with side guard rails to complete the box, complete with the runners for the gripper, the drive motors, sprockets, shafts, chains and electrical installation,
controls the horizontal, which â«fachbelegtâ».
as a hoist is used:
1 controlled engine
with intermediate gear (designed according to fem 3 m) and drum includes cords and ball-bearing pulleys; security 12, with double-grooved rope drum, dust-protected bearings drum bearing,
rope pulleys conditions according to din 15020.
4. electrical installation, comprising:
-the special cables, including all required terminal boxes, connecting cables fixed installed on the device
-the flexible power supply in cable caterpillar to the trucks,
-completely wired cabinet incl. contactor and the necessary controls, the mushroom-head pushbutton, which shuts off the main contactor (red mushroom can be rotated), switch with push button, key switch
-the two key selector switches, which are used for the pre-selection of the operating modes â«tip operation/automatic modeâ»,
the limit switches for the limitation of the lifting and moving
-the reciprocal locking of lifting and suspension compared to the ausziehvorâ¬
-direction, the laterally mounted clamping wires to the continuous control of the speed profile
-the profile control, which monitors whether the space between the shelf and device is free,
-the output fuse, which prevents that cassettes in a free space be outsourced,
-excess height control, which prevents a training and storage of high-loaded cartridges,
-the control of tape position on the table,
-the fault indicator in the control panel on the lift truck,
-the operating hour counters for driving and lifting mechanism
displacement measuring systems
the wear-free optical measuring system guarantees maximum service life and precise way capture of the x - and y-coordinates. the way capture of the two gripper through the absolute value encoder is located in the millimetre range. both systems deliver the absolutely correct readings again even after a power failure. thus it takes no movements for repositioning and the device starts working immediately without delay.
driving behavior
driving in the x and y axes is such that at the maximum possible speed infinitely variable over short or long distances optimal speed curves are driven. the behavior of the device dimensions at various distances is taken into account and flows as a control variable with a. the pendulum effect is compensated with counteract the driving curve characteristics,
learning functions
the computer software is so forward-looking that hardly a parameterization of various sizes must be done by the programmer. the software adaptation to different design types of device and storage compartments is done through the learning and self-learning onsite. following learning processes take place during commissioning on site:
-self-learning of the xy-driving behavior
-learning of the gripper behavior
-learning the transfer and recording places of the periphery
self learning the topology of all storage compartments of different arrangement and sizes
operating modes
-jog
the long good stacking device in the direction of travel, the truck and the two pull-out devices can be moved with the control buttons.
-semi automatic (automatic start-up), arranged in the stationary cupboard.
with the hand-held micro terminal, various movements are run separately or in combination automatically:
-driving horizontal
vertical lifting/lowering
-pull cassette
-slide tape
-positioning in front of the nearest
option
pc-cabinet for m fs calculator
execution: wxhxd 600 x 1900 x 600 mm
4-field 17 "monitor field of vision
part of front door for computer unit
integrated keyboard tray
storage compartment with removable rails
socket 100 mm
(ii) peripheral components, including:
1 1 carousel ka-3000 gr gr
for cassettes with rods
technical data:
capacity/capacity 3000 kg
number of pitches 4
conveying speed along 24 m / min
cross conveyor speed 40 m / min
height from top of floor 700 mm
operating voltage 400 v / 50 hz
control voltage 230 v / 50 hz
the cartridge space tracking via the automatic control. the carousel consists in particular of:
outsourcing train, consisting of:
-the steel foot plates and anchors, directly on the ground turned off and integrated into the shelf, suitable for the installation of the required mechanical parts
-the spezialgleitem, as well as the lateral guide
-the gripper mechanism, which contains the tape and transported to the next position positively
the gear motor with chain, the sprocket wheels and the chain guide
cross conveyor belt, comprising;
-two cassette courses, one of them as work provided
-the steel construction incl. foot plates and anchors, placed directly on the floor, suitable for the installation of the required mechanical parts
-the special gliders, as well as the lateral guide
-the querverschiebebalken as a driver for the cassettes
-the drive motor with the required drive elements
-the mechanical preparations for the load cells installation at the workplace
storage car, running such as paging railway
electrical control consisting of:
-the control panel with push buttons for all individual movements, including on/off button and emergency push button
-the position and control switches
-power and control supply
-firmly installed control cabinets with built-in control
-the necessary cables, as well as the internal wiring
the safety light barrier incl. mounting brackets, which perceives the person protection during cartridge movement
 
condition: used, the last maintenance was performed in 2017, shortly after it was mined professionally, so that it can be rebuilt at any time. the company which has degraded the plant could perform the installation.
available: available now
location: nuremberg CASSETTE FOR WAREHOUSE, ABOUT 1,539 CASSETTES, CASSETTE LENGTH 6, 50 M, 3, 000 KG/KASSTTE - USED -: PRICE ON REQUEST! MANUFACTURER: FEHR YEAR OF CONSTRUCTION: 2001 CASSETTES GES. 1,539 UNITS SPECIFICATION 1 ELECTRICALLY OPERATED DOUBLE TABLE LONG GOOD STACK MACHINE, AUTOMATICALLY CONTROLLED, FOR THE STORAGE AND RETRIEVAL OF FOR GOOD MATERIAL, WITH THE HELP OF CASSETTES TECHNICAL DATA: CAPACITY 2X3000KG BOTTOM LOAD TABLE POSITION ABOVE GROUND 700 MM TOP LOAD TABLE POSITION ABOVE GROUND 12110 MM ROOM HEIGHT 13'450 MM LIFTING SPEED 35 M / MIN TRAVEL SPEED 80 M / MIN PULL-OUT SPEED 85 M / MIN OPERATING VOLTAGE, THREE-PHASE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ 24 V DC CASSETTE TYPE INTERNAL DIMENSIONS (WXHXL) A 520 X 270 X 6500 MM TYPE B 520 X 520 X 6500 MM DEVICE PERFORMANCE AT 100% LOAD 46 DS / H ACCORDING TO FEM BASED ON UB-3000 9.851 PULL-OUT FORCE ON THE CASSETTE GRIPPER (20% OF THE PAYLOAD PLUS CARTRIDGE WEIGHT) CONTROL AUTOMATICALLY ARRANGED USING AN AUTOMATIC CONTROL OVER OPERATING TERMINAL, AT THE CAMP OFFICE 1. 1 DOUBLE-SIDED TRACK, LENGTH APPROX 29 M TO HANG UP ON THE CONCRETE FLOOR, CONSISTING OF: THE TWO RAILS OF A 55, WITH THE SHOCKS, COMPLETE WITH ATTACHMENT FITTINGS AND THE LIMIT STOPS. THE RAILS ARE WITH FADE-FREE SPECIAL GROUT UNDER POURED. 2. 1 LONGITUDINAL-POWER SUPPLY, LENGTH APPROX 29 M, CONSISTING OF: VAHLE PLASTIC CONDUCTOR LINE, WITH GUARD, COMPLETE WITH THE MOUNTING BRACKETS. 3. 1 LONG GOODS STACKING DEVICES, CONSISTING OF: CAMP 2 HEAD STRAPS WELDED DESIGN, WITH THE CHASSIS, THIS CONSISTING OF WäLZGE CONTROLLED FROM THE TWO ENGINES WITH SHAFT MOUNTED GEARBOXES BUILT-ON, AS WELL AS THE 4 - CRANE WHEELS, WITH LEADERSHIP ROLES, RUNNING LATERALLY ON THE ROAD, 2 COLUMNS IN WELDED BOX CONSTRUCTION, WITH THE GUIDES FOR THE LIFTERS FROM MATERIAL PERFORMED ST 52.3, SCREWED ON THE HEAD STRAPS, INCLUDING THE STIFFENING FRAME, AS WELL AS A LADDER OF DESCENT,. 1 PALLET TRUCK, CONSISTING OF: THE STEEL CONSTRUCTION WITH THE NECESSARY RUBBER BUFFERS FOR THE TWO HöHENEND POSITIONS, THE ROLLER BEARING SUPPORT AND LEADERSHIP ROLES, THE DOUBLE CASSETTE TABLE WITH GLIDES, THE EXTRACTOR, THE CENTERING WITH SIDE GUARD RAILS TO COMPLETE THE BOX, COMPLETE WITH THE RUNNERS FOR THE GRIPPER, THE DRIVE MOTORS, SPROCKETS, SHAFTS, CHAINS AND ELECTRICAL INSTALLATION, CONTROLS THE HORIZONTAL, WHICH «FACHBELEGT». AS A HOIST IS USED: 1 CONTROLLED ENGINE WITH INTERMEDIATE GEAR (DESIGNED ACCORDING TO FEM 3 M) AND DRUM INCLUDES CORDS AND BALL-BEARING PULLEYS; SECURITY 12, WITH DOUBLE-GROOVED ROPE DRUM, DUST-PROTECTED BEARINGS DRUM BEARING, ROPE PULLEYS CONDITIONS ACCORDING TO DIN 15020. 4. ELECTRICAL INSTALLATION, COMPRISING: -THE SPECIAL CABLES, INCLUDING ALL REQUIRED TERMINAL BOXES, CONNECTING CABLES FIXED INSTALLED ON THE DEVICE -THE FLEXIBLE POWER SUPPLY IN CABLE CATERPILLAR TO THE TRUCKS, -COMPLETELY WIRED CABINET INCL. CONTACTOR AND THE NECESSARY CONTROLS, THE MUSHROOM-HEAD PUSHBUTTON, WHICH SHUTS OFF THE MAIN CONTACTOR (RED MUSHROOM CAN BE ROTATED), SWITCH WITH PUSH BUTTON, KEY SWITCH -THE TWO KEY SELECTOR SWITCHES, WHICH ARE USED FOR THE PRE-SELECTION OF THE OPERATING MODES «TIP OPERATION/AUTOMATIC MODE», THE LIMIT SWITCHES FOR THE LIMITATION OF THE LIFTING AND MOVING -THE RECIPROCAL LOCKING OF LIFTING AND SUSPENSION COMPARED TO THE AUSZIEHVOR¬ -DIRECTION, THE LATERALLY MOUNTED CLAMPING WIRES TO THE CONTINUOUS CONTROL OF THE SPEED PROFILE -THE PROFILE CONTROL, WHICH MONITORS WHETHER THE SPACE BETWEEN THE SHELF AND DEVICE IS FREE, -THE OUTPUT FUSE, WHICH PREVENTS THAT CASSETTES IN A FREE SPACE BE OUTSOURCED, -EXCESS HEIGHT CONTROL, WHICH PREVENTS A TRAINING AND STORAGE OF HIGH-LOADED CARTRIDGES, -THE CONTROL OF TAPE POSITION ON THE TABLE, -THE FAULT INDICATOR IN THE CONTROL PANEL ON THE LIFT TRUCK, -THE OPERATING HOUR COUNTERS FOR DRIVING AND LIFTING MECHANISM DISPLACEMENT MEASURING SYSTEMS THE WEAR-FREE OPTICAL MEASURING SYSTEM GUARANTEES MAXIMUM SERVICE LIFE AND PRECISE WAY CAPTURE OF THE X - AND Y-COORDINATES. THE WAY CAPTURE OF THE TWO GRIPPER THROUGH THE ABSOLUTE VALUE ENCODER IS LOCATED IN THE MILLIMETRE RANGE. BOTH SYSTEMS DELIVER THE ABSOLUTELY CORRECT READINGS AGAIN EVEN AFTER A POWER FAILURE. THUS IT TAKES NO MOVEMENTS FOR REPOSITIONING AND THE DEVICE STARTS WORKING IMMEDIATELY WITHOUT DELAY. DRIVING BEHAVIOR DRIVING IN THE X AND Y AXES IS SUCH THAT AT THE MAXIMUM POSSIBLE SPEED INFINITELY VARIABLE OVER SHORT OR LONG DISTANCES OPTIMAL SPEED CURVES ARE DRIVEN. THE BEHAVIOR OF THE DEVICE DIMENSIONS AT VARIOUS DISTANCES IS TAKEN INTO ACCOUNT AND FLOWS AS A CONTROL VARIABLE WITH A. THE PENDULUM EFFECT IS COMPENSATED WITH COUNTERACT THE DRIVING CURVE CHARACTERISTICS, LEARNING FUNCTIONS THE COMPUTER SOFTWARE IS SO FORWARD-LOOKING THAT HARDLY A PARAMETERIZATION OF VARIOUS SIZES MUST BE DONE BY THE PROGRAMMER. THE SOFTWARE ADAPTATION TO DIFFERENT DESIGN TYPES OF DEVICE AND STORAGE COMPARTMENTS IS DONE THROUGH THE LEARNING AND SELF-LEARNING ONSITE. FOLLOWING LEARNING PROCESSES TAKE PLACE DURING COMMISSIONING ON SITE: -SELF-LEARNING OF THE XY-DRIVING BEHAVIOR -LEARNING OF THE GRIPPER BEHAVIOR -LEARNING THE TRANSFER AND RECORDING PLACES OF THE PERIPHERY SELF LEARNING THE TOPOLOGY OF ALL STORAGE COMPARTMENTS OF DIFFERENT ARRANGEMENT AND SIZES OPERATING MODES -JOG THE LONG GOOD STACKING DEVICE IN THE DIRECTION OF TRAVEL, THE TRUCK AND THE TWO PULL-OUT DEVICES CAN BE MOVED WITH THE CONTROL BUTTONS. -SEMI AUTOMATIC (AUTOMATIC START-UP), ARRANGED IN THE STATIONARY CUPBOARD. WITH THE HAND-HELD MICRO TERMINAL, VARIOUS MOVEMENTS ARE RUN SEPARATELY OR IN COMBINATION AUTOMATICALLY: -DRIVING HORIZONTAL VERTICAL LIFTING/LOWERING -PULL CASSETTE -SLIDE TAPE -POSITIONING IN FRONT OF THE NEAREST OPTION PC-CABINET FOR M FS CALCULATOR EXECUTION: WXHXD 600 X 1900 X 600 MM 4-FIELD 17 "MONITOR FIELD OF VISION PART OF FRONT DOOR FOR COMPUTER UNIT INTEGRATED KEYBOARD TRAY STORAGE COMPARTMENT WITH REMOVABLE RAILS SOCKET 100 MM (II) PERIPHERAL COMPONENTS, INCLUDING: 1 1 CAROUSEL KA-3000 GR GR FOR CASSETTES WITH RODS TECHNICAL DATA: CAPACITY/CAPACITY 3000 KG NUMBER OF PITCHES 4 CONVEYING SPEED ALONG 24 M / MIN CROSS CONVEYOR SPEED 40 M / MIN HEIGHT FROM TOP OF FLOOR 700 MM OPERATING VOLTAGE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ THE CARTRIDGE SPACE TRACKING VIA THE AUTOMATIC CONTROL. THE CAROUSEL CONSISTS IN PARTICULAR OF: OUTSOURCING TRAIN, CONSISTING OF: -THE STEEL FOOT PLATES AND ANCHORS, DIRECTLY ON THE GROUND TURNED OFF AND INTEGRATED INTO THE SHELF, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPEZIALGLEITEM, AS WELL AS THE LATERAL GUIDE -THE GRIPPER MECHANISM, WHICH CONTAINS THE TAPE AND TRANSPORTED TO THE NEXT POSITION POSITIVELY THE GEAR MOTOR WITH CHAIN, THE SPROCKET WHEELS AND THE CHAIN GUIDE CROSS CONVEYOR BELT, COMPRISING; -TWO CASSETTE COURSES, ONE OF THEM AS WORK PROVIDED -THE STEEL CONSTRUCTION INCL. FOOT PLATES AND ANCHORS, PLACED DIRECTLY ON THE FLOOR, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPECIAL GLIDERS, AS WELL AS THE LATERAL GUIDE -THE QUERVERSCHIEBEBALKEN AS A DRIVER FOR THE CASSETTES -THE DRIVE MOTOR WITH THE REQUIRED DRIVE ELEMENTS -THE MECHANICAL PREPARATIONS FOR THE LOAD CELLS INSTALLATION AT THE WORKPLACE STORAGE CAR, RUNNING SUCH AS PAGING RAILWAY ELECTRICAL CONTROL CONSISTING OF: -THE CONTROL PANEL WITH PUSH BUTTONS FOR ALL INDIVIDUAL MOVEMENTS, INCLUDING ON/OFF BUTTON AND EMERGENCY PUSH BUTTON -THE POSITION AND CONTROL SWITCHES -POWER AND CONTROL SUPPLY -FIRMLY INSTALLED CONTROL CABINETS WITH BUILT-IN CONTROL -THE NECESSARY CABLES, AS WELL AS THE INTERNAL WIRING THE SAFETY LIGHT BARRIER INCL. MOUNTING BRACKETS, WHICH PERCEIVES THE PERSON PROTECTION DURING CARTRIDGE MOVEMENT CONDITION: USED, THE LAST MAINTENANCE WAS PERFORMED IN 2017, SHORTLY AFTER IT WAS MINED PROFESSIONALLY, SO THAT IT CAN BE REBUILT AT ANY TIME. THE COMPANY WHICH HAS DEGRADED THE PLANT COULD PERFORM THE INSTALLATION. AVAILABLE: AVAILABLE NOW LOCATION: NUREMBERG
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 75 €
Ubicación: Land-approximately 75-80 st. heson tank 1000 x 800mm - gebraucht-:
 
price / piece from location: 75.-â?¬ (net)
 
manufacturer: unknown
type: henson, special container 36071
transport tray type 21145-00-0
size: 1000 x 800mm
stack height: 620 mm
filling height: 500 mm
vertical clearance: 120 mm
entry level mid mid foot: 700 mm
running-in level cross: 600 mm
clearance: 150mm
wall thickness: 2 mm
panel thickness: 3 mm
base thickness: 4 mm
bottom middle center with a series of water drain holes
available: available now
condition: used, approx. 1/3: 1 + 2 medium quality, poor quality of 3 + 4, 5 + 6 good quality
location: fulda APPROXIMATELY 75-80 ST. HESON TANK 1000 X 800MM - GEBRAUCHT-: PRICE / PIECE FROM LOCATION: 75.-Â?¬ (NET) MANUFACTURER: UNKNOWN TYPE: HENSON, SPECIAL CONTAINER 36071 TRANSPORT TRAY TYPE 21145-00-0 SIZE: 1000 X 800MM STACK HEIGHT: 620 MM FILLING HEIGHT: 500 MM VERTICAL CLEARANCE: 120 MM ENTRY LEVEL MID MID FOOT: 700 MM RUNNING-IN LEVEL CROSS: 600 MM CLEARANCE: 150MM WALL THICKNESS: 2 MM PANEL THICKNESS: 3 MM BASE THICKNESS: 4 MM BOTTOM MIDDLE CENTER WITH A SERIES OF WATER DRAIN HOLES AVAILABLE: AVAILABLE NOW CONDITION: USED, APPROX. 1/3: 1 + 2 MEDIUM QUALITY, POOR QUALITY OF 3 + 4, 5 + 6 GOOD QUALITY LOCATION: FULDA
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 8.820 €
Ubicación: Land-thread cutting device
freischneiden setup
drilling depth shut off programmable
drilling depth and speed display - digital
thread cutting device m30 (depending on elevation)
r1 spindle speed with continuous transmission speed series 100-2000 1 / min
r2 spindle speed with continuous transmission speed range 70-1400 1/min
drilling capacity 35/40 mm
spindle mk 4
drilling depth 160 mm
throat depth 300 mm
usable surface (pivoting) 590 x 450 mm
feed 0-300 mm / min stepless
table height with rack and pinion
machine dimensions (w x d x h) 610 x 850 x 1920 mm
motor three-phase 400 v pole changing bar 1,5/3,0 kw
weight 420 kg

including drilling package consisting: taper mandrel, chuck, vice and t - groove set. 
option: spindle stop and modulus of rupture of chip 660 eur

delivery: free house including packaging

not the right machine?
we do also other afloat products - ask for a quote!

flott base partner *. THREAD CUTTING DEVICE FREISCHNEIDEN SETUP DRILLING DEPTH SHUT OFF PROGRAMMABLE DRILLING DEPTH AND SPEED DISPLAY - DIGITAL THREAD CUTTING DEVICE M30 (DEPENDING ON ELEVATION) R1 SPINDLE SPEED WITH CONTINUOUS TRANSMISSION SPEED SERIES 100-2000 1 / MIN R2 SPINDLE SPEED WITH CONTINUOUS TRANSMISSION SPEED RANGE 70-1400 1/MIN DRILLING CAPACITY 35/40 MM SPINDLE MK 4 DRILLING DEPTH 160 MM THROAT DEPTH 300 MM USABLE SURFACE (PIVOTING) 590 X 450 MM FEED 0-300 MM / MIN STEPLESS TABLE HEIGHT WITH RACK AND PINION MACHINE DIMENSIONS (W X D X H) 610 X 850 X 1920 MM MOTOR THREE-PHASE 400 V POLE CHANGING BAR 1,5/3,0 KW WEIGHT 420 KG INCLUDING DRILLING PACKAGE CONSISTING: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. OPTION: SPINDLE STOP AND MODULUS OF RUPTURE OF CHIP 660 EUR DELIVERY: FREE HOUSE INCLUDING PACKAGING NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more OTT types: