61 ofertas

Año de construcción: usado
Ubicación: Land-automatic baler 

manufacturer: paal 

type: konti 275 d 

year of manufacture: 2004

hours of operation: 32.800 h 

 

main parts of the press: 
1 automatic kanalpresse1 automatic verschnürung
1 hydraulic system
1 electric control

technical data:

pressing force: 750 kn / 75 t at 300 bar

specific pressing force: 9.09 kg / cm²

chanel cross-section (h x w): 750 x 1.100 mm

filler: 1.020 x 1.550 mm

number of binding wires: 4 units vertical

+ additional 3 piece horizontal 

drive performance:
main pump: 1 x 75 kw pump flow rate: 1 x 520 l/min

capacity: up to 350 m³/h

hydraulic oil tank volume: 2.200 l

operating voltage: 3 x 400 vac, 50 hz / n / pe 


other facilities:

-operator panel mp 270

-automatic stamper

-central lubrication point

-large digit display for bale length and fault indicator
  AUTOMATIC BALER MANUFACTURER: PAAL TYPE: KONTI 275 D YEAR OF MANUFACTURE: 2004 HOURS OF OPERATION: 32.800 H MAIN PARTS OF THE PRESS: 1 AUTOMATIC KANALPRESSE1 AUTOMATIC VERSCHNüRUNG 1 HYDRAULIC SYSTEM 1 ELECTRIC CONTROL TECHNICAL DATA: PRESSING FORCE: 750 KN / 75 T AT 300 BAR SPECIFIC PRESSING FORCE: 9.09 KG / CM² CHANEL CROSS-SECTION (H X W): 750 X 1.100 MM FILLER: 1.020 X 1.550 MM NUMBER OF BINDING WIRES: 4 UNITS VERTICAL + ADDITIONAL 3 PIECE HORIZONTAL DRIVE PERFORMANCE: MAIN PUMP: 1 X 75 KW PUMP FLOW RATE: 1 X 520 L/MIN CAPACITY: UP TO 350 M³/H HYDRAULIC OIL TANK VOLUME: 2.200 L OPERATING VOLTAGE: 3 X 400 VAC, 50 HZ / N / PE OTHER FACILITIES: -OPERATOR PANEL MP 270 -AUTOMATIC STAMPER -CENTRAL LUBRICATION POINT -LARGE DIGIT DISPLAY FOR BALE LENGTH AND FAULT INDICATOR
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer paal<br/>typ konti mk 325 d-so<br/>year of construction 2001<br/>hours of operation 28,898 hours, stand january 2019<br/>press power main press 94 tons<br/>feed channel 2,000 x 1,020 mm<br/>filling volume 2,15 m³<br/>theoretic  throughput rate 825 m³/h<br/>throughput rate under operating conditions 400 m³/h<br/>bale size 1,100 x 750 mm, length variable<br/>driving motor 2 x 45 kw<br/>ruffler 15 kw<br/>connected load 128 kw<br/>rated current 240 a<br/>tying system 4 fold vertical, full automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx. 14 tons/h<br/>bulk weight of 50 kg/cbm approx. 27 tons/h<br/>bulk weight of 100 kg/cbm approx. 38 tons/h<br/>bale weight 525 up to 800 kg, depends on bale length and material<br/>volume hydraulic oil 3,100 l<br/>installation dimensions press with hopper and conveyor 13,312 x 22,800 x 5,700 mm (l x w x h)<br/>transport dimensions only baler 12,352 x 2,340 x 2,800 mm (l x w x h)<br/>machine weight baler approx. 28 tons<br/><br/>technical data conveyor belt<br/>manufacturer  paal<br/>typ kes-1750<br/>year of construction 2001<br/>driving motor 7,5 kw<br/>belt speed 0,3 m/sec.<br/>centre distance 19,500 mm<br/>length feeding conveyor 6,010 mm<br/>length elevating conveyor 11,050 mm<br/>gradient 28°<br/>effecting width 1,750 mm<br/>height drive axle over ground 4,410 mm<br/>height of side wall feeding conv. 527 mm<br/>height of side wall elevating conv. 1,027 mm<br/>pit dimensions 10,100 x 3,100 x 1,250 mm (l x w x d)<br/>weight approx. 12 tons<br/><br/>comments:<br/>the press is in good working condition and immediately available.the seal on the main hydraulic cylinder would have to be replaced. <br/>the scope of delivery includes a conveyor belt (chain belt conveyor, manufacturer paal, type kes-1750), 8 wire stations (without wire) and a bale slider. <br/>the documentation (manual, ce, electrical/hydraulic diagram) is available. an inspection is possible after arrangement. dismantling and loading is the responsibility of the buyer. we assume no liability for the technical data or any errors. TECHNICAL DATA BALER
MANUFACTURER PAAL
TYP KONTI MK 325 D-SO
YEAR OF CONSTRUCTION 2001
HOURS OF OPERATION 28,898 HOURS, STAND JANUARY 2019
PRESS POWER MAIN PRESS 94 TONS
FEED CHANNEL 2,000 X 1,020 MM
FILLING VOLUME 2,15 M³
THEORETIC THROUGHPUT RATE 825 M³/H
THROUGHPUT RATE UNDER OPERATING CONDITIONS 400 M³/H
BALE SIZE 1,100 X 750 MM, LENGTH VARIABLE
DRIVING MOTOR 2 X 45 KW
RUFFLER 15 KW
CONNECTED LOAD 128 KW
RATED CURRENT 240 A
TYING SYSTEM 4 FOLD VERTICAL, FULL AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 14 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 27 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 38 TONS/H
BALE WEIGHT 525 UP TO 800 KG, DEPENDS ON BALE LENGTH AND MATERIAL
VOLUME HYDRAULIC OIL 3,100 L
INSTALLATION DIMENSIONS PRESS WITH HOPPER AND CONVEYOR 13,312 X 22,800 X 5,700 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 12,352 X 2,340 X 2,800 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 28 TONS

TECHNICAL DATA CONVEYOR BELT
MANUFACTURER PAAL
TYP KES-1750
YEAR OF CONSTRUCTION 2001
DRIVING MOTOR 7,5 KW
BELT SPEED 0,3 M/SEC.
CENTRE DISTANCE 19,500 MM
LENGTH FEEDING CONVEYOR 6,010 MM
LENGTH ELEVATING CONVEYOR 11,050 MM
GRADIENT 28°
EFFECTING WIDTH 1,750 MM
HEIGHT DRIVE AXLE OVER GROUND 4,410 MM
HEIGHT OF SIDE WALL FEEDING CONV. 527 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 1,027 MM
PIT DIMENSIONS 10,100 X 3,100 X 1,250 MM (L X W X D)
WEIGHT APPROX. 12 TONS

COMMENTS:
THE PRESS IS IN GOOD WORKING CONDITION AND IMMEDIATELY AVAILABLE.THE SEAL ON THE MAIN HYDRAULIC CYLINDER WOULD HAVE TO BE REPLACED.
THE SCOPE OF DELIVERY INCLUDES A CONVEYOR BELT (CHAIN BELT CONVEYOR, MANUFACTURER PAAL, TYPE KES-1750), 8 WIRE STATIONS (WITHOUT WIRE) AND A BALE SLIDER.
THE DOCUMENTATION (MANUAL, CE, ELECTRICAL/HYDRAULIC DIAGRAM) IS AVAILABLE. AN INSPECTION IS POSSIBLE AFTER ARRANGEMENT. DISMANTLING AND LOADING IS THE RESPONSIBILITY OF THE BUYER. WE ASSUME NO LIABILITY FOR THE TECHNICAL DATA OR ANY ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-automatic baler
 
manufacturer: paal
 
type: konti 325 d
 
year of construction: 2001
 
 
technical data:
 
pressing force: 94 t
channel size: 750 x 1.100 mm
specific pressing force: 11,39 kg/cm²
bale weight: 525-800 kg, depending on the material and bale length
filler: 1.750 x 1.020 mm
power: 2 x 55 kw
capacity: 430 m³/h
press power:
-approx. 15.0 t / h at cardboard (35 kg / m³ bulk weight)
-approx. 25.0 t / h for mixed paper (60 kg / m³ bulk weight)
-approx. 40.0 t / h for collecting goods (100 kg / m³ bulk weight)
wirbulator: 15 kw
setting: 4 vertical 
machine weight: approx. 29 t
 
optional with:
 
amb feeding conveyor
type: chain conveyor
conveyor width: approx. 1.700 mm
task length: approx. 18.185 mm
platform length: approx. 9.500 mm
climbing angle: approx. 28°
gooseneck: yes, about 1.000 mm long
page cheek height: approx. 500 / 1.000 mm
transfer height center drum: 3.855 mm  AUTOMATIC BALER MANUFACTURER: PAAL TYPE: KONTI 325 D YEAR OF CONSTRUCTION: 2001 TECHNICAL DATA: PRESSING FORCE: 94 T CHANNEL SIZE: 750 X 1.100 MM SPECIFIC PRESSING FORCE: 11,39 KG/CM² BALE WEIGHT: 525-800 KG, DEPENDING ON THE MATERIAL AND BALE LENGTH FILLER: 1.750 X 1.020 MM POWER: 2 X 55 KW CAPACITY: 430 M³/H PRESS POWER: -APPROX. 15.0 T / H AT CARDBOARD (35 KG / M³ BULK WEIGHT) -APPROX. 25.0 T / H FOR MIXED PAPER (60 KG / M³ BULK WEIGHT) -APPROX. 40.0 T / H FOR COLLECTING GOODS (100 KG / M³ BULK WEIGHT) WIRBULATOR: 15 KW SETTING: 4 VERTICAL MACHINE WEIGHT: APPROX. 29 T OPTIONAL WITH: AMB FEEDING CONVEYOR TYPE: CHAIN CONVEYOR CONVEYOR WIDTH: APPROX. 1.700 MM TASK LENGTH: APPROX. 18.185 MM PLATFORM LENGTH: APPROX. 9.500 MM CLIMBING ANGLE: APPROX. 28° GOOSENECK: YES, ABOUT 1.000 MM LONG PAGE CHEEK HEIGHT: APPROX. 500 / 1.000 MM TRANSFER HEIGHT CENTER DRUM: 3.855 MM
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-manufacturer paal<br/>typ konti 425 e<br/>year of construction 2007<br/>hours of operation 33,959 hours<br/>press power 100 tons (120 tons at 300 bar)<br/>specific press capacity 121,1 tons/m²<br/>feed channel 2,000 x 1,020 mm (l x w)<br/>throughput rate under operating conditions 375 m³/hour<br/>theoretic  throughput rate 780 m³/hour<br/>bale size 1,100 x 750 mm (w x h)<br/>driving motor 2 x 45 kw<br/>connected load 108 kw<br/>rated current 210 a<br/>tying system 5-fold vertical, fully automated<br/>throughput rate at a<br/>bulk weight of 35 kg/cbm approx. 13 tons/hour<br/>bulk weight of 60 kg/cbm  approx. 22 tons/hour<br/>bulk weight of 100 kg/cbm  approx. 35 tons/hour<br/>bale weight 550 up to 750 kg, depends on material<br/>volume hydraulic oil tank 3,100 l<br/>sps controller (manuf., type) siemens s7 300<br/>operating panel (manuf., type) siemens multi panel<br/>transport dimensions only baler 14,827 x 2,352 x 3,210 mm<br/>machine weight baler approx. 38 tons<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER PAAL
TYP KONTI 425 E
YEAR OF CONSTRUCTION 2007
HOURS OF OPERATION 33,959 HOURS
PRESS POWER 100 TONS (120 TONS AT 300 BAR)
SPECIFIC PRESS CAPACITY 121,1 TONS/M²
FEED CHANNEL 2,000 X 1,020 MM (L X W)
THROUGHPUT RATE UNDER OPERATING CONDITIONS 375 M³/HOUR
THEORETIC THROUGHPUT RATE 780 M³/HOUR
BALE SIZE 1,100 X 750 MM (W X H)
DRIVING MOTOR 2 X 45 KW
CONNECTED LOAD 108 KW
RATED CURRENT 210 A
TYING SYSTEM 5-FOLD VERTICAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 35 KG/CBM APPROX. 13 TONS/HOUR
BULK WEIGHT OF 60 KG/CBM APPROX. 22 TONS/HOUR
BULK WEIGHT OF 100 KG/CBM APPROX. 35 TONS/HOUR
BALE WEIGHT 550 UP TO 750 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 3,100 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS MULTI PANEL
TRANSPORT DIMENSIONS ONLY BALER 14,827 X 2,352 X 3,210 MM
MACHINE WEIGHT BALER APPROX. 38 TONS

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-automatic baler
 
manufacturer: paal
 
type: konti 275 e/k
 
year of manufacture: 2007
 
 
main parts of the press:
 
1 automatic channel press
1 automatic binding system
1 hydraulic system 
1 electric control specifications:
pressing force: 820 kn / 82 t at 315 bar
specific pressing force: 9,7 kg/cm²
chanel cross-section (h x w): 750 x 1.100 mm
feeding opening: 1.020 x 1.600 mm
number of binding wires: 4 piece vertical + horizontal 3 piece
 
drive performance:
main pump: 1 x 75 kw
pump flow rate: 1 x 520 l/min
capacity: up to 350 m³/h
hydraulic oil tank volume: 2.100 l
operating voltage: 3 x 400 vac, 50 hz / n / pe
amenities:
-operator panel mp 270
-automatic stamper
-central lubrication point
-large digit display for bale length and fault indicator

images are submitted  AUTOMATIC BALER MANUFACTURER: PAAL TYPE: KONTI 275 E/K YEAR OF MANUFACTURE: 2007 MAIN PARTS OF THE PRESS: 1 AUTOMATIC CHANNEL PRESS 1 AUTOMATIC BINDING SYSTEM 1 HYDRAULIC SYSTEM 1 ELECTRIC CONTROL SPECIFICATIONS: PRESSING FORCE: 820 KN / 82 T AT 315 BAR SPECIFIC PRESSING FORCE: 9,7 KG/CM² CHANEL CROSS-SECTION (H X W): 750 X 1.100 MM FEEDING OPENING: 1.020 X 1.600 MM NUMBER OF BINDING WIRES: 4 PIECE VERTICAL + HORIZONTAL 3 PIECE DRIVE PERFORMANCE: MAIN PUMP: 1 X 75 KW PUMP FLOW RATE: 1 X 520 L/MIN CAPACITY: UP TO 350 M³/H HYDRAULIC OIL TANK VOLUME: 2.100 L OPERATING VOLTAGE: 3 X 400 VAC, 50 HZ / N / PE AMENITIES: -OPERATOR PANEL MP 270 -AUTOMATIC STAMPER -CENTRAL LUBRICATION POINT -LARGE DIGIT DISPLAY FOR BALE LENGTH AND FAULT INDICATOR IMAGES ARE SUBMITTED
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer paal<br/>typ konti 600 d<br/>year of construction 2001<br/>hours of operation 26,784 hours, stand january 2019<br/>press power main press 145 tons<br/>feed channel 2,000 x 1,020 mm<br/>filling volume 3,45 m³<br/>theoretic  throughput rate 1,070 m³/h<br/>throughput rate under operating conditions 540 m³/h<br/>bale size 1,100 x 1,080 mm, length variable<br/>driving motor 3 x 45 kw<br/>ruffler 15 kw<br/>connected load 185 kw<br/>rated current 340 a<br/>tying system 5 fold vertical, full automatic<br/>throughput rate at a<br/>bulk weight of 35 kg/cbm approx. 17 tons/h<br/>bulk weight of 60 kg/cbm approx. 30 tons/h<br/>bulk weight of 100 kg/cbm approx. 47 tons/h<br/>bale weight 800 up to 1,250 kg, depends on bale length and material<br/>volume hydraulic oil 3,100 l<br/>transport dimensions only baler 14,365 x 2,600 x 3,640 mm (l x w x h)<br/>machine weight baler approx. 32 tons<br/><br/>technical data conveyor belt<br/>manufacturer   metaalwaren de schermer<br/>typ skb 1800<br/>year of construction 12/2002<br/>driving motor 7,5 kw<br/>belt speed 0,3 m/sec.<br/>length feeding conveyor 10,500 mm<br/>length elevating conveyor 8,000 mm<br/>effecting width 1,700 mm<br/>pit dimensions 14,000 x 2,500 x 1,510 mm (l x w x d)<br/>weight approx. 12,5 tons<br/><br/>comments:<br/>the press with conveyor belt is currently still in operation, the replacement with a new system is planned for the 2nd quarter of this year. <br/>the scope of delivery includes a conveyor belt (chain belt conveyor, manufacturer  metaalwaren de schermer, type skb 1800), 10 wire stations (without wire) and a bale slider.<br/>the documentation (manual, ce, electrical/hydraulic diagram) is available. an inspection is possible after arrangement. dismantling and loading is the responsibility of the buyer. we assume no liability for the technical data or any errors. TECHNICAL DATA BALER
MANUFACTURER PAAL
TYP KONTI 600 D
YEAR OF CONSTRUCTION 2001
HOURS OF OPERATION 26,784 HOURS, STAND JANUARY 2019
PRESS POWER MAIN PRESS 145 TONS
FEED CHANNEL 2,000 X 1,020 MM
FILLING VOLUME 3,45 M³
THEORETIC THROUGHPUT RATE 1,070 M³/H
THROUGHPUT RATE UNDER OPERATING CONDITIONS 540 M³/H
BALE SIZE 1,100 X 1,080 MM, LENGTH VARIABLE
DRIVING MOTOR 3 X 45 KW
RUFFLER 15 KW
CONNECTED LOAD 185 KW
RATED CURRENT 340 A
TYING SYSTEM 5 FOLD VERTICAL, FULL AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 35 KG/CBM APPROX. 17 TONS/H
BULK WEIGHT OF 60 KG/CBM APPROX. 30 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 47 TONS/H
BALE WEIGHT 800 UP TO 1,250 KG, DEPENDS ON BALE LENGTH AND MATERIAL
VOLUME HYDRAULIC OIL 3,100 L
TRANSPORT DIMENSIONS ONLY BALER 14,365 X 2,600 X 3,640 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 32 TONS

TECHNICAL DATA CONVEYOR BELT
MANUFACTURER METAALWAREN DE SCHERMER
TYP SKB 1800
YEAR OF CONSTRUCTION 12/2002
DRIVING MOTOR 7,5 KW
BELT SPEED 0,3 M/SEC.
LENGTH FEEDING CONVEYOR 10,500 MM
LENGTH ELEVATING CONVEYOR 8,000 MM
EFFECTING WIDTH 1,700 MM
PIT DIMENSIONS 14,000 X 2,500 X 1,510 MM (L X W X D)
WEIGHT APPROX. 12,5 TONS

COMMENTS:
THE PRESS WITH CONVEYOR BELT IS CURRENTLY STILL IN OPERATION, THE REPLACEMENT WITH A NEW SYSTEM IS PLANNED FOR THE 2ND QUARTER OF THIS YEAR.
THE SCOPE OF DELIVERY INCLUDES A CONVEYOR BELT (CHAIN BELT CONVEYOR, MANUFACTURER METAALWAREN DE SCHERMER, TYPE SKB 1800), 10 WIRE STATIONS (WITHOUT WIRE) AND A BALE SLIDER.
THE DOCUMENTATION (MANUAL, CE, ELECTRICAL/HYDRAULIC DIAGRAM) IS AVAILABLE. AN INSPECTION IS POSSIBLE AFTER ARRANGEMENT. DISMANTLING AND LOADING IS THE RESPONSIBILITY OF THE BUYER. WE ASSUME NO LIABILITY FOR THE TECHNICAL DATA OR ANY ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-paal konti 425 b, press power 100 t, inspection under working condition is possible any time
technical specification:
manufacturer paal, germany
type konti 425 b
year of construction 1989
press power 100 t
drive power 110 k
feed channel 1.020 x 2.000 mm
press channel dimensions 750 x 1100 mm (h x w)
bale weight 525-700 kg, depending on material
average throughput rates:
density of 35 kg/cbm 12 t/h
density of 60 kg/cbm 20 t/h
density of 100 kg/cbm 25 t/h
tying system 4-fold vertical, fully automated
dimension approx.14.024 x 2.352 x 3.613 mm (lxwxh)
weight approx 35 t
the press is still under working process and could be inspected any time PAAL KONTI 425 B, PRESS POWER 100 T, INSPECTION UNDER WORKING CONDITION IS POSSIBLE ANY TIME TECHNICAL SPECIFICATION: MANUFACTURER PAAL, GERMANY TYPE KONTI 425 B YEAR OF CONSTRUCTION 1989 PRESS POWER 100 T DRIVE POWER 110 K FEED CHANNEL 1.020 X 2.000 MM PRESS CHANNEL DIMENSIONS 750 X 1100 MM (H X W) BALE WEIGHT 525-700 KG, DEPENDING ON MATERIAL AVERAGE THROUGHPUT RATES: DENSITY OF 35 KG/CBM 12 T/H DENSITY OF 60 KG/CBM 20 T/H DENSITY OF 100 KG/CBM 25 T/H TYING SYSTEM 4-FOLD VERTICAL, FULLY AUTOMATED DIMENSION APPROX.14.024 X 2.352 X 3.613 MM (LXWXH) WEIGHT APPROX 35 T THE PRESS IS STILL UNDER WORKING PROCESS AND COULD BE INSPECTED ANY TIME
Vendedor: RDA Recycling Machinery GmbH
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer paal<br/>typ konti 275 e/k<br/>year of construction 2007<br/>hours of operation approx. 8,000 hours<br/>press power main press 80 tons at 300 bar<br/>specific press capacity 9,7 kg/cm²<br/>feed channel 1,600 x 1.020 mm (l x w)<br/>throughput capacity under operating conditions 350 m³/hour<br/>bale size 750 x 1,100 mm, length variable<br/>driving motor 75 kw<br/>connected load 99 kw<br/>rated current 180 a<br/>tying system 4-fold vertical, 3-fold horizontal, fully automatic<br/>bale weight up to 750 kg, depends on material<br/>volume hydraulic oil tank 2,100 l<br/>sps controller (manuf., type) siemens simatic s7-300<br/>operating panel (manuf., type) siemens multi panel<br/>transport dimensions only baler 11,152 x 2,152 x 3,000 mm (l x w x h)<br/>machine weight baler approx. 21 tons<br/><br/>condition of the baler:<br/>the press is currently in operation until the 17th calendar week and will then be replaced by a new press. with only approx. 8.000 operating hours the machine is in a really good condition and ready for immediate use.<br/><br/>scope of delivery:<br/>baling press, wire drawing stations (without wire), bale chute and machine documentation. the conveyor belt is not for sale and is therefore not included in the scope of delivery.<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available. dismantling and loading is the responsibility of the buyer. inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER PAAL
TYP KONTI 275 E/K
YEAR OF CONSTRUCTION 2007
HOURS OF OPERATION APPROX. 8,000 HOURS
PRESS POWER MAIN PRESS 80 TONS AT 300 BAR
SPECIFIC PRESS CAPACITY 9,7 KG/CM²
FEED CHANNEL 1,600 X 1.020 MM (L X W)
THROUGHPUT CAPACITY UNDER OPERATING CONDITIONS 350 M³/HOUR
BALE SIZE 750 X 1,100 MM, LENGTH VARIABLE
DRIVING MOTOR 75 KW
CONNECTED LOAD 99 KW
RATED CURRENT 180 A
TYING SYSTEM 4-FOLD VERTICAL, 3-FOLD HORIZONTAL, FULLY AUTOMATIC
BALE WEIGHT UP TO 750 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 2,100 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS SIMATIC S7-300
OPERATING PANEL (MANUF., TYPE) SIEMENS MULTI PANEL
TRANSPORT DIMENSIONS ONLY BALER 11,152 X 2,152 X 3,000 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 21 TONS

CONDITION OF THE BALER:
THE PRESS IS CURRENTLY IN OPERATION UNTIL THE 17TH CALENDAR WEEK AND WILL THEN BE REPLACED BY A NEW PRESS. WITH ONLY APPROX. 8.000 OPERATING HOURS THE MACHINE IS IN A REALLY GOOD CONDITION AND READY FOR IMMEDIATE USE.

SCOPE OF DELIVERY:
BALING PRESS, WIRE DRAWING STATIONS (WITHOUT WIRE), BALE CHUTE AND MACHINE DOCUMENTATION. THE CONVEYOR BELT IS NOT FOR SALE AND IS THEREFORE NOT INCLUDED IN THE SCOPE OF DELIVERY.

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. DISMANTLING AND LOADING IS THE RESPONSIBILITY OF THE BUYER. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-automatic baler

manufacturer: paal

type: konti 425 b/4

year of construction: 1988
 

technical data:
pressing force: 100 t
specific pressing force: 14.28 kg/cm²
power: 2 x 55 kw
total power of 152 kw
capacity: 340 m³/h under operating conditions
capacity at 35 kg / m³ approx.  12 t/h
capacity at 60 kg / m³ approx.  20 t/h
capacity at 100 kg / m³ approx. 25 t/h
filler: 2.000 x 1.020 mm
channel size: 750 x 1.100 mm
bale weights: approx. 525 to 700 kg depending on the material and bale length

more pictures on request  AUTOMATIC BALER MANUFACTURER: PAAL TYPE: KONTI 425 B/4 YEAR OF CONSTRUCTION: 1988 TECHNICAL DATA: PRESSING FORCE: 100 T SPECIFIC PRESSING FORCE: 14.28 KG/CM² POWER: 2 X 55 KW TOTAL POWER OF 152 KW CAPACITY: 340 M³/H UNDER OPERATING CONDITIONS CAPACITY AT 35 KG / M³ APPROX. 12 T/H CAPACITY AT 60 KG / M³ APPROX. 20 T/H CAPACITY AT 100 KG / M³ APPROX. 25 T/H FILLER: 2.000 X 1.020 MM CHANNEL SIZE: 750 X 1.100 MM BALE WEIGHTS: APPROX. 525 TO 700 KG DEPENDING ON THE MATERIAL AND BALE LENGTH MORE PICTURES ON REQUEST
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-manufacturer paal<br/>typ konti 325 e<br/>year of construction 2003<br/>press power main press 94 tons<br/>feed channel 1,750 x 1,020 mm<br/>filling volume 2,15 m³<br/>theoretic throughput rate 660 m³/h<br/>throughput rate under operating conditions 340 m³/h<br/>bale size 1,100 x 750 mm, length variable <br/>driving motor 75 kw<br/>connected load 96 kw<br/>rated current 180 a<br/>tying system 4 fold vertical, full automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx. 11,5 tons/h<br/>bulk weight of 50 kg/cbm approx. 20 tons/h<br/>bulk weight of 100 kg/cbm approx. 32 tons/h<br/>bale weight 525 up to 800 kg, depends on bale length and material<br/>volume hydraulic oil 2,100 l<br/>machine dimensions with feed channel 12,352 x 2,340 x 5,145 mm l x w x h)<br/>transport dimensions only baler 12,352 x 2,340 x 2,800 mm (l x w x h)<br/>machine weight baler approx. 26 tons<br/><br/>comments:<br/>the press is sold without conveyor belt.<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER PAAL
TYP KONTI 325 E
YEAR OF CONSTRUCTION 2003
PRESS POWER MAIN PRESS 94 TONS
FEED CHANNEL 1,750 X 1,020 MM
FILLING VOLUME 2,15 M³
THEORETIC THROUGHPUT RATE 660 M³/H
THROUGHPUT RATE UNDER OPERATING CONDITIONS 340 M³/H
BALE SIZE 1,100 X 750 MM, LENGTH VARIABLE
DRIVING MOTOR 75 KW
CONNECTED LOAD 96 KW
RATED CURRENT 180 A
TYING SYSTEM 4 FOLD VERTICAL, FULL AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 11,5 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 20 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 32 TONS/H
BALE WEIGHT 525 UP TO 800 KG, DEPENDS ON BALE LENGTH AND MATERIAL
VOLUME HYDRAULIC OIL 2,100 L
MACHINE DIMENSIONS WITH FEED CHANNEL 12,352 X 2,340 X 5,145 MM L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 12,352 X 2,340 X 2,800 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 26 TONS

COMMENTS:
THE PRESS IS SOLD WITHOUT CONVEYOR BELT.
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-automatic baler

manufacturer: paal

type: mk 325 d / so

year of construction: 2001

technical data:
pressing force: 80 t
filler: 102 x 200 cm
performance under operating conditions: about 420 m3/h
power press: 2 x 45 kw
wirbulator: 15 kw
wire train: 4 kw
transposition: 3 kw
bale dimensions: approx. 75 x 110 x adjustable cm
bale weight: up to approx. 725 kg depending on the pressed product and bale length
weight of the press until: 28 tons depending on equipment

more pictures on request
  AUTOMATIC BALER MANUFACTURER: PAAL TYPE: MK 325 D / SO YEAR OF CONSTRUCTION: 2001 TECHNICAL DATA: PRESSING FORCE: 80 T FILLER: 102 X 200 CM PERFORMANCE UNDER OPERATING CONDITIONS: ABOUT 420 M3/H POWER PRESS: 2 X 45 KW WIRBULATOR: 15 KW WIRE TRAIN: 4 KW TRANSPOSITION: 3 KW BALE DIMENSIONS: APPROX. 75 X 110 X ADJUSTABLE CM BALE WEIGHT: UP TO APPROX. 725 KG DEPENDING ON THE PRESSED PRODUCT AND BALE LENGTH WEIGHT OF THE PRESS UNTIL: 28 TONS DEPENDING ON EQUIPMENT MORE PICTURES ON REQUEST
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Precio: 29.500 €
Ubicación: Land-manufacturer paal<br/>typ konti 600 d/k<br/>year of contruction  2001<br/>press power main press 145 tons<br/>feeding volume 3,45 cbm<br/>feed channel 2,000 x 1,020 mm (l x w) <br/>bale size  1,080 x 1,100 mm<br/>driving motor 3 x 45 kw<br/>connected load 171 kw / 320 a<br/>tying system 5-fold vertical, 4-fold horizontal, fully automated<br/>throughput rates under operating conditions 540 cbm/h<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 16,5 tons/h<br/>bulk weight of 50 kg/cbm approx. 27 tons/h<br/>bulk weight of 100 kg/cbm approx. 40 tons/h<br/>bale weight 800 up to 1,250 kg<br/>volume oil tank 3,100 l<br/>plc system siemens s7 300<br/>transport dimensions  approx. 14,365 x 2,600 x 3,640 mm (l x w x h)<br/>machine weight approx. 32 tons<br/> <br/>comments: inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER PAAL
TYP KONTI 600 D/K
YEAR OF CONTRUCTION 2001
PRESS POWER MAIN PRESS 145 TONS
FEEDING VOLUME 3,45 CBM
FEED CHANNEL 2,000 X 1,020 MM (L X W)
BALE SIZE 1,080 X 1,100 MM
DRIVING MOTOR 3 X 45 KW
CONNECTED LOAD 171 KW / 320 A
TYING SYSTEM 5-FOLD VERTICAL, 4-FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATES UNDER OPERATING CONDITIONS 540 CBM/H
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 16,5 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 27 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 40 TONS/H
BALE WEIGHT 800 UP TO 1,250 KG
VOLUME OIL TANK 3,100 L
PLC SYSTEM SIEMENS S7 300
TRANSPORT DIMENSIONS APPROX. 14,365 X 2,600 X 3,640 MM (L X W X H)
MACHINE WEIGHT APPROX. 32 TONS

COMMENTS: INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-paal konti 325 d/so, press power 95 t, constructed in 2000, on request with conveyor
technical specifications
manufacturer paal, germany
type konti 325 d-so
year of construction 2000
press power 95 t
drive power 2 x 45 kw
feed channel 1750 x 1020 mm
press channel dimensions 750 x 1100 mm (h x w)
bale weight 500-750 kg, depending on material
average throughput rates:   
density of 35 kg/cbm 14t/h
density of 60 kg/cbm 27 t/h
density of 100 kg/cbm 38 t/h
tying system 4-fold vertical, fully automated
transport dimension 12.352 x 2340 x 2800 mm (lxwxh)
weight approx 26 t PAAL KONTI 325 D/SO, PRESS POWER 95 T, CONSTRUCTED IN 2000, ON REQUEST WITH CONVEYOR TECHNICAL SPECIFICATIONS MANUFACTURER PAAL, GERMANY TYPE KONTI 325 D-SO YEAR OF CONSTRUCTION 2000 PRESS POWER 95 T DRIVE POWER 2 X 45 KW FEED CHANNEL 1750 X 1020 MM PRESS CHANNEL DIMENSIONS 750 X 1100 MM (H X W) BALE WEIGHT 500-750 KG, DEPENDING ON MATERIAL AVERAGE THROUGHPUT RATES: DENSITY OF 35 KG/CBM 14T/H DENSITY OF 60 KG/CBM 27 T/H DENSITY OF 100 KG/CBM 38 T/H TYING SYSTEM 4-FOLD VERTICAL, FULLY AUTOMATED TRANSPORT DIMENSION 12.352 X 2340 X 2800 MM (LXWXH) WEIGHT APPROX 26 T
Vendedor: RDA Recycling Machinery GmbH
Año de construcción: usado
Ubicación: Land-manufacturer paal<br/>typ konti 700 f/k<br/>year of construction 2009<br/>hours of operation approx. 44.000 h<br/>press power main press 170 tons<br/>specific press capacity 14 kg/cm²<br/>feed channel 2,000 x 1,020 mm (l x w)<br/>capacity per cycle time 3,45 cbm<br/>throughput rate under operating conditions 650 cbm/h<br/>bale size 1,100 x 1,100 mm (w x h) length adjustable<br/>driving motor 3 x 75 kw<br/>connected load 255 kw<br/>tying system 5 fold vertical, 4 fold horizontal, fully automated<br/>throughput rate  <br/>bulk weight of 30 kg/cbm approx. 16 tons/h<br/>bulk weight of 50 kg/cbm approx. 26 tons/h<br/>bulk weight of 100 kg/cbm approx. 39 tons/h<br/>throughput rate with ruffler approx. 20 tons/h<br/>bale weight 650 up to 950 kg<br/>baler dimensions built up with hopper approx. 14,365 x 2,600 x 5,760 mm (l x w x h)<br/>transport dimensions only baler approx. 14,365 x 2,600 x 3,640 mm (l x w x h)<br/>machine weight baler 47 tons<br/>accessories (ruffler, pre-compressor, perforator, conveyor belt, etc.) chain belt conveyor<br/>comments inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER PAAL
TYP KONTI 700 F/K
YEAR OF CONSTRUCTION 2009
HOURS OF OPERATION APPROX. 44.000 H
PRESS POWER MAIN PRESS 170 TONS
SPECIFIC PRESS CAPACITY 14 KG/CM²
FEED CHANNEL 2,000 X 1,020 MM (L X W)
CAPACITY PER CYCLE TIME 3,45 CBM
THROUGHPUT RATE UNDER OPERATING CONDITIONS 650 CBM/H
BALE SIZE 1,100 X 1,100 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 3 X 75 KW
CONNECTED LOAD 255 KW
TYING SYSTEM 5 FOLD VERTICAL, 4 FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATE
BULK WEIGHT OF 30 KG/CBM APPROX. 16 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 26 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 39 TONS/H
THROUGHPUT RATE WITH RUFFLER APPROX. 20 TONS/H
BALE WEIGHT 650 UP TO 950 KG
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX. 14,365 X 2,600 X 5,760 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX. 14,365 X 2,600 X 3,640 MM (L X W X H)
MACHINE WEIGHT BALER 47 TONS
ACCESSORIES (RUFFLER, PRE-COMPRESSOR, PERFORATOR, CONVEYOR BELT, ETC.) CHAIN BELT CONVEYOR
COMMENTS INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-pressure: 600 kn  (60 tons)
unit-pressure: 73 tons/m²
dimensions of the channel: 75 x 110 cm
charging hole: 102 x 155 cm
volume of feeding hopper:	 1,4 m³
bale weight, depending on the type of raw material and length of the bale: 450-600 kg
efficiency on idle:	 ab. 475 m³ / hour
efficiency under load:	ab. 275 m³ / hour
power: 400v
number of strapping’s: 4 vertical
tying: automatic with wire 
theoretical efficiency with material in density 20kg/m³) 5,5 tons/hour
theoretical efficiency with material in density 35kg/m³) 9,5 tons/hour
theoretical efficiency with material in density 60kg/m³) 16,5 tony/hour
theoretical efficiency with material in density 100kg/m³) 22 tons/hour
baler weight:	 ab. 21 tons

open charging hole allows the filling with the conveyor belt.
knives on the pressing plate and on the frame of the baler to cut off the excess material 
automatic regulation of the pressing channel
automatic bale tying with the wire
changing the length of the finished bale from the operators panel 
the compact hydraulic power pack with a low noise level 
pressing plate which is stable carried on big rolls 
big flaps on the pressing chamber for easier maintenance 
automatic blades cleaning system
ruffler, which is a necessary by pressing of newspapers and magazines, inserted into the baler hopper

kontakt:
englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939  
  PRESSURE: 600 KN (60 TONS) UNIT-PRESSURE: 73 TONS/M² DIMENSIONS OF THE CHANNEL: 75 X 110 CM CHARGING HOLE: 102 X 155 CM VOLUME OF FEEDING HOPPER: 1,4 M³ BALE WEIGHT, DEPENDING ON THE TYPE OF RAW MATERIAL AND LENGTH OF THE BALE: 450-600 KG EFFICIENCY ON IDLE: AB. 475 M³ / HOUR EFFICIENCY UNDER LOAD: AB. 275 M³ / HOUR POWER: 400V NUMBER OF STRAPPING’S: 4 VERTICAL TYING: AUTOMATIC WITH WIRE THEORETICAL EFFICIENCY WITH MATERIAL IN DENSITY 20KG/M³) 5,5 TONS/HOUR THEORETICAL EFFICIENCY WITH MATERIAL IN DENSITY 35KG/M³) 9,5 TONS/HOUR THEORETICAL EFFICIENCY WITH MATERIAL IN DENSITY 60KG/M³) 16,5 TONY/HOUR THEORETICAL EFFICIENCY WITH MATERIAL IN DENSITY 100KG/M³) 22 TONS/HOUR BALER WEIGHT: AB. 21 TONS OPEN CHARGING HOLE ALLOWS THE FILLING WITH THE CONVEYOR BELT. KNIVES ON THE PRESSING PLATE AND ON THE FRAME OF THE BALER TO CUT OFF THE EXCESS MATERIAL AUTOMATIC REGULATION OF THE PRESSING CHANNEL AUTOMATIC BALE TYING WITH THE WIRE CHANGING THE LENGTH OF THE FINISHED BALE FROM THE OPERATORS PANEL THE COMPACT HYDRAULIC POWER PACK WITH A LOW NOISE LEVEL PRESSING PLATE WHICH IS STABLE CARRIED ON BIG ROLLS BIG FLAPS ON THE PRESSING CHAMBER FOR EASIER MAINTENANCE AUTOMATIC BLADES CLEANING SYSTEM RUFFLER, WHICH IS A NECESSARY BY PRESSING OF NEWSPAPERS AND MAGAZINES, INSERTED INTO THE BALER HOPPER KONTAKT: ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-manufacturer paal<br/>typ konti 600 hs<br/>year of construction 2016<br/>hours of operation 6,925 hours, stand 10/2018<br/>press power main press 158 tons<br/>spec. press force 128 n/cm²<br/>feed channel 2,000 x 1,020 mm<br/>filling volume 3,45 m³<br/>theoretic  throughput rate 1,265 m³/h<br/>throughput rate under operating conditions 805 m³/h<br/>bale size 1,100 x 1,100 mm, length variable<br/>driving motor 3 x 55 kw<br/>tying system 5 fold vertical, full automatic<br/>throughput rate at a<br/>bulk weight of 35 kg/cbm approx. 28 tons/h<br/>bulk weight of 60 kg/cbm approx. 45 tons/h<br/>bulk weight of 100 kg/cbm approx. 64 tons/h<br/>plc siemens s7-300<br/>operating panel siemens simatic touch panel<br/>installation dimensions press with hopper 13,450 x 2,710 x 5,640 mm (l x w x h)<br/>transport dimensions only baler 13,450 x 2,710 x 3,290 mm (l x w x h)<br/>machine weight baler approx. 42 tons<br/><br/>technical data conveyor belt<br/>manufacturer  paal<br/>typ kes 1900 (chain belt conveyor)<br/>year of construction 2016<br/>driving motor 7,5 kw<br/>belt speed 0,3 m/sec.<br/>length feeding conveyor 4,000 mm<br/><br/>comments:<br/>the press is sold incl. chain belt conveyor, manufacturer paal, type kes-1900, wire drawing stations (without wire) and bale slide. the dismantling and loading of the equipment is the responsibility of the buyer. the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER PAAL
TYP KONTI 600 HS
YEAR OF CONSTRUCTION 2016
HOURS OF OPERATION 6,925 HOURS, STAND 10/2018
PRESS POWER MAIN PRESS 158 TONS
SPEC. PRESS FORCE 128 N/CM²
FEED CHANNEL 2,000 X 1,020 MM
FILLING VOLUME 3,45 M³
THEORETIC THROUGHPUT RATE 1,265 M³/H
THROUGHPUT RATE UNDER OPERATING CONDITIONS 805 M³/H
BALE SIZE 1,100 X 1,100 MM, LENGTH VARIABLE
DRIVING MOTOR 3 X 55 KW
TYING SYSTEM 5 FOLD VERTICAL, FULL AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 35 KG/CBM APPROX. 28 TONS/H
BULK WEIGHT OF 60 KG/CBM APPROX. 45 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 64 TONS/H
PLC SIEMENS S7-300
OPERATING PANEL SIEMENS SIMATIC TOUCH PANEL
INSTALLATION DIMENSIONS PRESS WITH HOPPER 13,450 X 2,710 X 5,640 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 13,450 X 2,710 X 3,290 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 42 TONS

TECHNICAL DATA CONVEYOR BELT
MANUFACTURER PAAL
TYP KES 1900 (CHAIN BELT CONVEYOR)
YEAR OF CONSTRUCTION 2016
DRIVING MOTOR 7,5 KW
BELT SPEED 0,3 M/SEC.
LENGTH FEEDING CONVEYOR 4,000 MM

COMMENTS:
THE PRESS IS SOLD INCL. CHAIN BELT CONVEYOR, MANUFACTURER PAAL, TYPE KES-1900, WIRE DRAWING STATIONS (WITHOUT WIRE) AND BALE SLIDE. THE DISMANTLING AND LOADING OF THE EQUIPMENT IS THE RESPONSIBILITY OF THE BUYER. THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 1.300 €
Ubicación: Land-manufacturer: paal
recording: ms 10

cutting width: 700/1700 mm, inner 1100 mm high, approx. 1100 mm deep
slope inclination of 25-30 °
with wear strip, without teeth

price plus 19% vat   MANUFACTURER: PAAL RECORDING: MS 10 CUTTING WIDTH: 700/1700 MM, INNER 1100 MM HIGH, APPROX. 1100 MM DEEP SLOPE INCLINATION OF 25-30 ° WITH WEAR STRIP, WITHOUT TEETH PRICE PLUS 19% VAT
Vendedor: Umrath Handel & Verwertung
Año de construcción: usado
Ubicación: Land-manufacturer paal<br/>typ konti 500 b/4<br/>year of construction 1989<br/>hours of operation approx. 39.000 h<br/>press power main press 120 tons<br/>specific press capacity 11,48 kg/cm²<br/>feed channel 2,000 x 1,020 mm (l x w)<br/>capacity per cycle time 2,25 cbm<br/>theoretic  throughput rate 780 cbm/h<br/>cycle time under operating conditions 500 cbm/h<br/>bale size 1,100 x 950 mm (w x h) length adjustable<br/>driving motor 3 x 45 kw<br/>connected load 156 kw<br/>tying system 4-fold vertical, fully automated<br/>throughput rate  <br/>bulk weight of 30 kg/cbm approx. 17 tons/h<br/>bulk weight of 50 kg/cbm approx. 30 tons/h<br/>bulk weight of 100 kg/cbm approx. 35 tons/h<br/>throughput rate with ruffler approx. 20 tons/h<br/>bale weight 650 up to 950 kg<br/>baler dimensions built up with hopper approx. 14,827 x 2,352 x 5,760 mm (l x w x h)<br/>transport dimensions only baler approx. 14,827 x 2,352 x 3,410 mm (l x w x h)<br/>machine weight baler 37 tons<br/>accessories (ruffler, pre-compressor, perforator, conveyor belt, etc.)  ruffler, 11 kw<br/> <br/>comments: inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER PAAL
TYP KONTI 500 B/4
YEAR OF CONSTRUCTION 1989
HOURS OF OPERATION APPROX. 39.000 H
PRESS POWER MAIN PRESS 120 TONS
SPECIFIC PRESS CAPACITY 11,48 KG/CM²
FEED CHANNEL 2,000 X 1,020 MM (L X W)
CAPACITY PER CYCLE TIME 2,25 CBM
THEORETIC THROUGHPUT RATE 780 CBM/H
CYCLE TIME UNDER OPERATING CONDITIONS 500 CBM/H
BALE SIZE 1,100 X 950 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 3 X 45 KW
CONNECTED LOAD 156 KW
TYING SYSTEM 4-FOLD VERTICAL, FULLY AUTOMATED
THROUGHPUT RATE
BULK WEIGHT OF 30 KG/CBM APPROX. 17 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 30 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 35 TONS/H
THROUGHPUT RATE WITH RUFFLER APPROX. 20 TONS/H
BALE WEIGHT 650 UP TO 950 KG
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX. 14,827 X 2,352 X 5,760 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX. 14,827 X 2,352 X 3,410 MM (L X W X H)
MACHINE WEIGHT BALER 37 TONS
ACCESSORIES (RUFFLER, PRE-COMPRESSOR, PERFORATOR, CONVEYOR BELT, ETC.) RUFFLER, 11 KW

COMMENTS: INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 1.300 €
Ubicación: Land-manufacturer: hs schoch, paal
recording: ms 25
cutting width: 800/1750 mm, inner 1300 mm high, approx. 1100 mm deep
embankment slope 20-25 °
wings in 1950 mm long, above 2250 mm wide
with wear strip, without teeth

price plus 19% vat  MANUFACTURER: HS SCHOCH, PAAL RECORDING: MS 25 CUTTING WIDTH: 800/1750 MM, INNER 1300 MM HIGH, APPROX. 1100 MM DEEP EMBANKMENT SLOPE 20-25 ° WINGS IN 1950 MM LONG, ABOVE 2250 MM WIDE WITH WEAR STRIP, WITHOUT TEETH PRICE PLUS 19% VAT
Vendedor: Umrath Handel & Verwertung
Año de construcción: usado
Ubicación: Land-paal konti 425 c, constructed in 1993, extensively overhauled and tested in 20, press power 100 t, selectable drive power ( 55, of 110 and of 165 kw), including distributor and wire unit
technical specifications
manufacturer paal`s packpressen-fabrik, georgsmarienhütte, germany
type konti 425 c
year of construction 1993
press power 100 t
specific forge pressure 12 kn/cm²
drive power 55 kw / 110 kw or 165 kw (1, 2 or 3 motors)
total connected load 198 kw
voltage rating 400 v
frequency 50 hz
feed channel 1.020 x 2.000 mm
channel cross section 750 x 1.100 mm
infilling volume 1,77 cbm
idle speed capacity approx. 940 cbm
operating press capacity approx. 340 cbm
press capacity / paper, cardbd. approx. 24 t/h at bulk density of 60 kg/cbm
press capacity / paper, cardbd. approx. 35 t/h at bulk density of 100 kg/cbm
bale weight 525 – 700 kg
hours of operation 24.917 h
tying system 4-fold, vertical
press weight approx. 35 t
transport dimensions 14.850 x 2.700 x 3.250 mm (l x w x h)
this machine is a used channel bale press exclusively used for paper, cardboard and foil. the press runs occasionally with one (55 kw) driving motor, two (110 kw) or with 3 motors of 165 kw. alternatively, the third motor can be connected automatically as a power reserve according to requirements. the press power of 100 t is even possible in case that due to a minor electrical connection only one motor is running. by using this option the press velocity will be slightly reduced, only. please see our video for better demonstration of the difference regarding press velocities with one respectively two running motors. the machine has been overhauled in our factory and may be visited according to prior agreement. PAAL KONTI 425 C, CONSTRUCTED IN 1993, EXTENSIVELY OVERHAULED AND TESTED IN 20, PRESS POWER 100 T, SELECTABLE DRIVE POWER ( 55, OF 110 AND OF 165 KW), INCLUDING DISTRIBUTOR AND WIRE UNIT TECHNICAL SPECIFICATIONS MANUFACTURER PAAL`S PACKPRESSEN-FABRIK, GEORGSMARIENHüTTE, GERMANY TYPE KONTI 425 C YEAR OF CONSTRUCTION 1993 PRESS POWER 100 T SPECIFIC FORGE PRESSURE 12 KN/CM² DRIVE POWER 55 KW / 110 KW OR 165 KW (1, 2 OR 3 MOTORS) TOTAL CONNECTED LOAD 198 KW VOLTAGE RATING 400 V FREQUENCY 50 HZ FEED CHANNEL 1.020 X 2.000 MM CHANNEL CROSS SECTION 750 X 1.100 MM INFILLING VOLUME 1,77 CBM IDLE SPEED CAPACITY APPROX. 940 CBM OPERATING PRESS CAPACITY APPROX. 340 CBM PRESS CAPACITY / PAPER, CARDBD. APPROX. 24 T/H AT BULK DENSITY OF 60 KG/CBM PRESS CAPACITY / PAPER, CARDBD. APPROX. 35 T/H AT BULK DENSITY OF 100 KG/CBM BALE WEIGHT 525 – 700 KG HOURS OF OPERATION 24.917 H TYING SYSTEM 4-FOLD, VERTICAL PRESS WEIGHT APPROX. 35 T TRANSPORT DIMENSIONS 14.850 X 2.700 X 3.250 MM (L X W X H) THIS MACHINE IS A USED CHANNEL BALE PRESS EXCLUSIVELY USED FOR PAPER, CARDBOARD AND FOIL. THE PRESS RUNS OCCASIONALLY WITH ONE (55 KW) DRIVING MOTOR, TWO (110 KW) OR WITH 3 MOTORS OF 165 KW. ALTERNATIVELY, THE THIRD MOTOR CAN BE CONNECTED AUTOMATICALLY AS A POWER RESERVE ACCORDING TO REQUIREMENTS. THE PRESS POWER OF 100 T IS EVEN POSSIBLE IN CASE THAT DUE TO A MINOR ELECTRICAL CONNECTION ONLY ONE MOTOR IS RUNNING. BY USING THIS OPTION THE PRESS VELOCITY WILL BE SLIGHTLY REDUCED, ONLY. PLEASE SEE OUR VIDEO FOR BETTER DEMONSTRATION OF THE DIFFERENCE REGARDING PRESS VELOCITIES WITH ONE RESPECTIVELY TWO RUNNING MOTORS. THE MACHINE HAS BEEN OVERHAULED IN OUR FACTORY AND MAY BE VISITED ACCORDING TO PRIOR AGREEMENT.
Vendedor: RDA Recycling Machinery GmbH
Año de construcción: usado
Ubicación: Land-automatic baler

producer: paal
 
type: pacomat v
 
year of construction: 2000
 
technical data:
pressing force: 50 t 
motor power: 45 kw
capacity: approx. 240 m³/h
feeding opening: 1.250 x 950 mm
automatic binding: 3 x horizontal
channel size: 700 x 1,000 mm (h x w)
bale size: 700 x 1.000 x length in mm
bale weight: up to 500 kg
machine weight: approx. 9.100 kg
  AUTOMATIC BALER PRODUCER: PAAL TYPE: PACOMAT V YEAR OF CONSTRUCTION: 2000 TECHNICAL DATA: PRESSING FORCE: 50 T MOTOR POWER: 45 KW CAPACITY: APPROX. 240 M³/H FEEDING OPENING: 1.250 X 950 MM AUTOMATIC BINDING: 3 X HORIZONTAL CHANNEL SIZE: 700 X 1,000 MM (H X W) BALE SIZE: 700 X 1.000 X LENGTH IN MM BALE WEIGHT: UP TO 500 KG MACHINE WEIGHT: APPROX. 9.100 KG
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-baler manufacturer: paal
 
type: hako 30 so
 
year built 1987

technical data:
pressing force: 30 t
power: 22 kw
filler: 1.800 x 1.020 mm
hydraulic 2 x upper box cap
size: 750 x 1,100 mm
setting: 4 x vertical and 2 horizontal fold by hand
bale weights: up to approx. 500 kg
machine weight approx.: 14.000 kg  BALER MANUFACTURER: PAAL TYPE: HAKO 30 SO YEAR BUILT 1987 TECHNICAL DATA: PRESSING FORCE: 30 T POWER: 22 KW FILLER: 1.800 X 1.020 MM HYDRAULIC 2 X UPPER BOX CAP SIZE: 750 X 1,100 MM SETTING: 4 X VERTICAL AND 2 HORIZONTAL FOLD BY HAND BALE WEIGHTS: UP TO APPROX. 500 KG MACHINE WEIGHT APPROX.: 14.000 KG
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-technical specifications:
manufacturer paal gmbh
type konti 600 d
press power 145 t
drive power 3 x 75 kw
year of construction 2003
filling aperture 1020 x 2000 mm
channel cross section 1080 x 1100 mm
throughput capacities:
- 35 kg/cbm 16 t/
- 60 kg/cbm 27,5 t/h
- 100 kg/cbm 41 t/h
tying system 4-fold vertical and horizontal
press weight approx. 42 to

please note:

all technical data refer to specifications of producer/owner. we will not assume liability for the given statements and possible errors.
this offer is non-binding, prior sale excepted und revocable at any time.
inspections possible after agreement. 
the sale against prepayment is ex location, as it stands and lays, without any oil or wire, and without liability and guarantee.
costs for dismantling, for transport and/or costs for loading are not included and have to be paid additionally. TECHNICAL SPECIFICATIONS: MANUFACTURER PAAL GMBH TYPE KONTI 600 D PRESS POWER 145 T DRIVE POWER 3 X 75 KW YEAR OF CONSTRUCTION 2003 FILLING APERTURE 1020 X 2000 MM CHANNEL CROSS SECTION 1080 X 1100 MM THROUGHPUT CAPACITIES: - 35 KG/CBM 16 T/ - 60 KG/CBM 27,5 T/H - 100 KG/CBM 41 T/H TYING SYSTEM 4-FOLD VERTICAL AND HORIZONTAL PRESS WEIGHT APPROX. 42 TO PLEASE NOTE: ALL TECHNICAL DATA REFER TO SPECIFICATIONS OF PRODUCER/OWNER. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN STATEMENTS AND POSSIBLE ERRORS. THIS OFFER IS NON-BINDING, PRIOR SALE EXCEPTED UND REVOCABLE AT ANY TIME. INSPECTIONS POSSIBLE AFTER AGREEMENT. THE SALE AGAINST PREPAYMENT IS EX LOCATION, AS IT STANDS AND LAYS, WITHOUT ANY OIL OR WIRE, AND WITHOUT LIABILITY AND GUARANTEE. COSTS FOR DISMANTLING, FOR TRANSPORT AND/OR COSTS FOR LOADING ARE NOT INCLUDED AND HAVE TO BE PAID ADDITIONALLY.
Vendedor: RDA Recycling Machinery GmbH
Año de construcción: usado
Ubicación: Land-contact:
englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939  CONTACT: ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-contact:
englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939  CONTACT: ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-we offer you a double gear pump for paal channel balers,
engine: 45kw

contact:
englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939 WE OFFER YOU A DOUBLE GEAR PUMP FOR PAAL CHANNEL BALERS, ENGINE: 45KW CONTACT: ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Precio: 3.147 €
Ubicación: Land-ein originalschaltschrank, der von der paal konti 425 b, bj. 1991 abgebaut wurde. 

er basiert auf siemens s5 steuerung. er ist auch für die weiteren modellen geeignet wie: konti 200, 275, 325, 425, 500, 600, 700, abhängig von modell und antriebsleistung. 

ein kompletter schaltschrank, funktionsfähig 

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939 EIN ORIGINALSCHALTSCHRANK, DER VON DER PAAL KONTI 425 B, BJ. 1991 ABGEBAUT WURDE. ER BASIERT AUF SIEMENS S5 STEUERUNG. ER IST AUCH FüR DIE WEITEREN MODELLEN GEEIGNET WIE: KONTI 200, 275, 325, 425, 500, 600, 700, ABHäNGIG VON MODELL UND ANTRIEBSLEISTUNG. EIN KOMPLETTER SCHALTSCHRANK, FUNKTIONSFäHIG ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Precio: 2.622 €
Ubicación: Land-ein originalschaltschrank, der von der paal konti 275 c, bj. 1994 abgebaut wurde.

  er basiert auf siemens s5 steuerung. er ist auch für die weiteren modellen geeignet wie: konti 200, 275, 325,425, abhängig von modell und antriebsleistung.  

ein kompletter schaltschrank, funktionsfähig  

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939 EIN ORIGINALSCHALTSCHRANK, DER VON DER PAAL KONTI 275 C, BJ. 1994 ABGEBAUT WURDE. ER BASIERT AUF SIEMENS S5 STEUERUNG. ER IST AUCH FüR DIE WEITEREN MODELLEN GEEIGNET WIE: KONTI 200, 275, 325,425, ABHäNGIG VON MODELL UND ANTRIEBSLEISTUNG. EIN KOMPLETTER SCHALTSCHRANK, FUNKTIONSFäHIG ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Precio: 2.098 €
Ubicación: Land- ein originalschaltschrank, der von der paal konti 125d, bj. 1999 abgebaut wurde. 

er basiert auf siemens s5 steuerung.

ein kompletter schaltschrank, funktionsfähig   

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939 EIN ORIGINALSCHALTSCHRANK, DER VON DER PAAL KONTI 125D, BJ. 1999 ABGEBAUT WURDE. ER BASIERT AUF SIEMENS S5 STEUERUNG. EIN KOMPLETTER SCHALTSCHRANK, FUNKTIONSFäHIG ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-automatic baler
 
manufacturer: paal
 
type: continuous 325 d / k
 
year of construction: 1999
 
 
technical data:
 
pressing force: 94 t
channel size: 750 x 1.100 mm
specific pressing force: 11,39 kg / cm²
bale weight: 525-800 kg, depending on the material and bale length
filler: 1.750 x 1.020 mm
power: 1 x 75 kw
capacity: 340 m³/h
press power:
-approx. 11,5 t / h at department store (35 kg / m³ bulk weight)
-approx. 24,0 t / h for mixed paper (60 kg / m³ bulk weight)
-approx. 32,0 t / h for collecting goods (100 kg / m³ bulk weight)
wirbulator: 15 kw
binding: 4 x vertical and 3 x horizontal
machine weight: 28 tons    AUTOMATIC BALER MANUFACTURER: PAAL TYPE: CONTINUOUS 325 D / K YEAR OF CONSTRUCTION: 1999 TECHNICAL DATA: PRESSING FORCE: 94 T CHANNEL SIZE: 750 X 1.100 MM SPECIFIC PRESSING FORCE: 11,39 KG / CM² BALE WEIGHT: 525-800 KG, DEPENDING ON THE MATERIAL AND BALE LENGTH FILLER: 1.750 X 1.020 MM POWER: 1 X 75 KW CAPACITY: 340 M³/H PRESS POWER: -APPROX. 11,5 T / H AT DEPARTMENT STORE (35 KG / M³ BULK WEIGHT) -APPROX. 24,0 T / H FOR MIXED PAPER (60 KG / M³ BULK WEIGHT) -APPROX. 32,0 T / H FOR COLLECTING GOODS (100 KG / M³ BULK WEIGHT) WIRBULATOR: 15 KW BINDING: 4 X VERTICAL AND 3 X HORIZONTAL MACHINE WEIGHT: 28 TONS
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-used baler
 
manufacturer: paal

type: hako 2

machine number: 22010
 

 

technical data:
pressing force: 50 t
power: 1 x 37 kw
filler: 1,020 x 1.200 mm
size: 800 x 1.100 mm
oil tank capacity approx.: 1.250 ltr.
setting: 4 vertically by hand
bale weights: up to approx. 600 kg
machine weight approx.: 12.000 kg
 
!!!! without the pictured bruns hkv!  USED BALER MANUFACTURER: PAAL TYPE: HAKO 2 MACHINE NUMBER: 22010 TECHNICAL DATA: PRESSING FORCE: 50 T POWER: 1 X 37 KW FILLER: 1,020 X 1.200 MM SIZE: 800 X 1.100 MM OIL TANK CAPACITY APPROX.: 1.250 LTR. SETTING: 4 VERTICALLY BY HAND BALE WEIGHTS: UP TO APPROX. 600 KG MACHINE WEIGHT APPROX.: 12.000 KG !!!! WITHOUT THE PICTURED BRUNS HKV!
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-automatic baler

manufacturer: paal
 
type: pacomat iii 65 c bh
 
year of manufacture: 2009
 

technical data:

pressing force: 63,3 t 
specific pressing force: 8.44 kg / cm²
system pressure: 315 bar
power: 75 kw
total power: 92 kw, 175 a
capacity: approx. 310 m³/h
capacity at 35 kg / m³: approx. 10,5 t / h
filler: 1.600 x 720 mm
channel size: 750 x 1.000 mm
oil tank capacity: 2.200 ltr.

optional with infeed conveyor

manufacturer: paal

type: kem 1500

year of manufacture: 2009

technical data:
 
conveyor width: 1.500 mm
task length: 3.000 mm
platform length: approx. 5.500 mm
gooseneck: yes

installation: for ramp feeding!  AUTOMATIC BALER MANUFACTURER: PAAL TYPE: PACOMAT III 65 C BH YEAR OF MANUFACTURE: 2009 TECHNICAL DATA: PRESSING FORCE: 63,3 T SPECIFIC PRESSING FORCE: 8.44 KG / CM² SYSTEM PRESSURE: 315 BAR POWER: 75 KW TOTAL POWER: 92 KW, 175 A CAPACITY: APPROX. 310 M³/H CAPACITY AT 35 KG / M³: APPROX. 10,5 T / H FILLER: 1.600 X 720 MM CHANNEL SIZE: 750 X 1.000 MM OIL TANK CAPACITY: 2.200 LTR. OPTIONAL WITH INFEED CONVEYOR MANUFACTURER: PAAL TYPE: KEM 1500 YEAR OF MANUFACTURE: 2009 TECHNICAL DATA: CONVEYOR WIDTH: 1.500 MM TASK LENGTH: 3.000 MM PLATFORM LENGTH: APPROX. 5.500 MM GOOSENECK: YES INSTALLATION: FOR RAMP FEEDING!
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-fully automatic baler
vertical & horizontal wiring
stamper fitted
feed conveyor with 20m in floor section available separately if required FULLY AUTOMATIC BALER VERTICAL & HORIZONTAL WIRING STAMPER FITTED FEED CONVEYOR WITH 20M IN FLOOR SECTION AVAILABLE SEPARATELY IF REQUIRED
Vendedor: Higgins Balers Ltd
Año de construcción: usado
Ubicación: Land-max. pressure: 	100 tons 	
year of production: 	1996
unit pressure: 	121,2 tons/m² 	
number of strappings: 	 4 - fold vertical,
cross-section of the channel: 750 x 1100 mm 	
filling inlet: 1020 x 2000 mm
bale weight: 550-750 kg 	
weight: ca 36 tons
supply: 400 v/ 2 x45 kw 	
bale tying: automatic, wire 

efficiency on idle:  max 780 m³/ hour    
efficiency under load:   max 370 m³ / hour

theoretical efficiency with material in density 35 kg/m³ 13 tons/hour    
theoretical efficiency with material in density 60 kg/m³ 22 tons/hour    
theoretical efficiency with material in density 100 kg/m³ 35 tons/hour 

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939 MAX. PRESSURE: 100 TONS YEAR OF PRODUCTION: 1996 UNIT PRESSURE: 121,2 TONS/M² NUMBER OF STRAPPINGS: 4 - FOLD VERTICAL, CROSS-SECTION OF THE CHANNEL: 750 X 1100 MM FILLING INLET: 1020 X 2000 MM BALE WEIGHT: 550-750 KG WEIGHT: CA 36 TONS SUPPLY: 400 V/ 2 X45 KW BALE TYING: AUTOMATIC, WIRE EFFICIENCY ON IDLE: MAX 780 M³/ HOUR EFFICIENCY UNDER LOAD: MAX 370 M³ / HOUR THEORETICAL EFFICIENCY WITH MATERIAL IN DENSITY 35 KG/M³ 13 TONS/HOUR THEORETICAL EFFICIENCY WITH MATERIAL IN DENSITY 60 KG/M³ 22 TONS/HOUR THEORETICAL EFFICIENCY WITH MATERIAL IN DENSITY 100 KG/M³ 35 TONS/HOUR ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-cutter (chipless), used for pipes and checked for function
manufacturer: rollepaal
type: cm 16-50
machine number.: 9045479
baujhar: 1991
pipe diameter range: 16-50 mm
maximum wall thickness: 4 mm
maximum extrusion speed: 19 m/min.
minimum cutting length: 150 mm
tolerance of the cutting length: +/-5 mm
extrusion height: 1100 mm
drive motor: 0.55 kw
accessories: digital length measurement
dimensions: 1600 x 500 x 1500 mm (lxwxh)
weight: 150 kg     CUTTER (CHIPLESS), USED FOR PIPES AND CHECKED FOR FUNCTION MANUFACTURER: ROLLEPAAL TYPE: CM 16-50 MACHINE NUMBER.: 9045479 BAUJHAR: 1991 PIPE DIAMETER RANGE: 16-50 MM MAXIMUM WALL THICKNESS: 4 MM MAXIMUM EXTRUSION SPEED: 19 M/MIN. MINIMUM CUTTING LENGTH: 150 MM TOLERANCE OF THE CUTTING LENGTH: +/-5 MM EXTRUSION HEIGHT: 1100 MM DRIVE MOTOR: 0.55 KW ACCESSORIES: DIGITAL LENGTH MEASUREMENT DIMENSIONS: 1600 X 500 X 1500 MM (LXWXH) WEIGHT: 150 KG
Vendedor: A. Knorr GmbH
Año de construcción: usado
Ubicación: Land-manufacturer paal
type pacomat 2
year of construction-1979
press press 27 to power main
feed channel 1000 x 650 mm (l x w)
theological the domestic troughput 200 cbm / h
bale size 700 x 1,000 mm (w x h) length adjustable
driving motor 20 kw
tying system 4-fold horizontal, fully automated
bale weight approx. 400 kg
transport dimensions only baler aprox. 7,600 x 1.720 x 2,500 mm (l x w x h)
machine weight baler 5 to
comments the baler which overhauled and tested. inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors.

producent paal
type pacomat 2
rok produkcji 1979
siå?a nacisku 27 t
wymiary wlotowego kanaå?u 1,000 x 650 mm (l x p)
teoretyczna wydajnoå?ä? 200 cbm / h
wymiary dieudonnã© 700 x 1,000 mm (s x h), då?ugoå?ä? zmienna
moc przyå?ä?czeniowa 20 kw
wiä?zanie 4-krotne horyzontalne, w peå?ni automatyczne
masa bala do ok. 400 kg
masa transportowa bez stempla 7,600 x 1.720 x 2,500 mm (l x s x h)
waga prasy ok. 5 t
uwagi prasa zostaå?a wyremontowana i poddana prã³bom. moå¼liwe obejrzenie maszyny na miejscu uprzednim umã³wieniu po.
 MANUFACTURER PAAL TYPE PACOMAT 2 YEAR OF CONSTRUCTION-1979 PRESS PRESS 27 TO POWER MAIN FEED CHANNEL 1000 X 650 MM (L X W) THEOLOGICAL THE DOMESTIC TROUGHPUT 200 CBM / H BALE SIZE 700 X 1,000 MM (W X H) LENGTH ADJUSTABLE DRIVING MOTOR 20 KW TYING SYSTEM 4-FOLD HORIZONTAL, FULLY AUTOMATED BALE WEIGHT APPROX. 400 KG TRANSPORT DIMENSIONS ONLY BALER APROX. 7,600 X 1.720 X 2,500 MM (L X W X H) MACHINE WEIGHT BALER 5 TO COMMENTS THE BALER WHICH OVERHAULED AND TESTED. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS. PRODUCENT PAAL TYPE PACOMAT 2 ROK PRODUKCJI 1979 SI&ARING;?A NACISKU 27 T WYMIARY WLOTOWEGO KANA&ARING;?U 1,000 X 650 MM (L X P) TEORETYCZNA WYDAJNO&ARING;?&AUML;? 200 CBM / H WYMIARY DIEUDONN&ATILDE;© 700 X 1,000 MM (S X H), D&ARING;?UGO&ARING;?&AUML;? ZMIENNA MOC PRZY&ARING;?&AUML;?CZENIOWA 20 KW WI&AUML;?ZANIE 4-KROTNE HORYZONTALNE, W PE&ARING;?NI AUTOMATYCZNE MASA BALA DO OK. 400 KG MASA TRANSPORTOWA BEZ STEMPLA 7,600 X 1.720 X 2,500 MM (L X S X H) WAGA PRASY OK. 5 T UWAGI PRASA ZOSTA&ARING;?A WYREMONTOWANA I PODDANA PR&ATILDE;&SUP3;BOM. MO&ARING;&FRAC14;LIWE OBEJRZENIE MASZYNY NA MIEJSCU UPRZEDNIM UM&ATILDE;&SUP3;WIENIU PO.
Vendedor: TCS Technical Consulting Szczecin Sp. z o.o.
Año de construcción: usado
Ubicación: Land-manufacturer paal
type pacomat 2s
year of construction 1998
press power main press 35 t
specific press capacity 5 kg / cmâ²
feed channel 1000 x 650 mm (l x w)
theo retic throughput rate 200 cbm / h
bale size 700 x 1,000 mm (w x h) length adjustable
driving motor 35 kw
tying system 4-fold horizontal, fully automated
bale weight approx. 450 kg
total dimensions 6,500 x 3,200 x 2,900 mm (l x w x h)
transport dimensions 6,500 x 1,600 x 2,900 mm (l x w x h)
machine weight baler approx. 8 to
	
comments: the baler has been overhauled and tested and is immediately ready for operation. inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors.

producent paal
type pacomat 2s
rok produkcji 1998
siå?a nacisku 35 t
siå?a nacisku jednostkowa 5.0 kg / cmâ²
wymiary wlotowego kanaå?u 1,000 x 650 mm (l x p)
teoretyczna wydajnoå?ä? 200 cbm / h
wymiary dieudonnã© 700 x 1,000 mm (s x h), då?ugoå?ä? zmienna
moc przyå?ä?czeniowa 35 kw
wiä?zanie 4-krotne horyzontalne, w peå?ni automatyczne
masa bala approx. 450 kg
wymiary maszyny 6,500 x 3,200 x 2,900 mm (l x s x h)
wymiary transportowe 6,500 x 1,600 x 2,900 mm (l x s x h)
waga prasy approx. 8 t
	
uwagi: prasa zostaå?a wyremontowana i poddana prã³bom. moå¼liwe obejrzenie maszyny na miejscu uprzednim umã³wieniu po.
 MANUFACTURER PAAL TYPE PACOMAT 2S YEAR OF CONSTRUCTION 1998 PRESS POWER MAIN PRESS 35 T SPECIFIC PRESS CAPACITY 5 KG / CM&ACIRC;&SUP2; FEED CHANNEL 1000 X 650 MM (L X W) THEO RETIC THROUGHPUT RATE 200 CBM / H BALE SIZE 700 X 1,000 MM (W X H) LENGTH ADJUSTABLE DRIVING MOTOR 35 KW TYING SYSTEM 4-FOLD HORIZONTAL, FULLY AUTOMATED BALE WEIGHT APPROX. 450 KG TOTAL DIMENSIONS 6,500 X 3,200 X 2,900 MM (L X W X H) TRANSPORT DIMENSIONS 6,500 X 1,600 X 2,900 MM (L X W X H) MACHINE WEIGHT BALER APPROX. 8 TO COMMENTS: THE BALER HAS BEEN OVERHAULED AND TESTED AND IS IMMEDIATELY READY FOR OPERATION. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS. PRODUCENT PAAL TYPE PACOMAT 2S ROK PRODUKCJI 1998 SI&ARING;?A NACISKU 35 T SI&ARING;?A NACISKU JEDNOSTKOWA 5.0 KG / CM&ACIRC;&SUP2; WYMIARY WLOTOWEGO KANA&ARING;?U 1,000 X 650 MM (L X P) TEORETYCZNA WYDAJNO&ARING;?&AUML;? 200 CBM / H WYMIARY DIEUDONN&ATILDE;© 700 X 1,000 MM (S X H), D&ARING;?UGO&ARING;?&AUML;? ZMIENNA MOC PRZY&ARING;?&AUML;?CZENIOWA 35 KW WI&AUML;?ZANIE 4-KROTNE HORYZONTALNE, W PE&ARING;?NI AUTOMATYCZNE MASA BALA APPROX. 450 KG WYMIARY MASZYNY 6,500 X 3,200 X 2,900 MM (L X S X H) WYMIARY TRANSPORTOWE 6,500 X 1,600 X 2,900 MM (L X S X H) WAGA PRASY APPROX. 8 T UWAGI: PRASA ZOSTA&ARING;?A WYREMONTOWANA I PODDANA PR&ATILDE;&SUP3;BOM. MO&ARING;&FRAC14;LIWE OBEJRZENIE MASZYNY NA MIEJSCU UPRZEDNIM UM&ATILDE;&SUP3;WIENIU PO.
Vendedor: TCS Technical Consulting Szczecin Sp. z o.o.
Año de construcción: usado
Ubicación: Land-automatic baler 

manufacturer: paal 

type: konti 275 d / (k) 

year 1998

 
technical data: 
pressing force: 75 t
specific pressing force: 9,09 kg/cm²
channel size: 750 x 1.100 mm
bale weight: 500-750 kg, depending on the material and bale length
filler: 1.550 x 1.020 mm
power: 45 kw
capacity: 280 m³/h
press power:
-approx. 9,5 t/h at department store (35 kg / m³ bulk weight)
-approx. 16.5 t/h for mixed paper (60 kg / m³ bulk weight)
-approx. 26,0 t/h for collecting goods (100 kg / m³ bulk weight)
setting: 4 x vertical
preparation for an additional 3 x horizontal setting
wirbulator 15 kw
machine weight: approx. 24,0 t   AUTOMATIC BALER MANUFACTURER: PAAL TYPE: KONTI 275 D / (K) YEAR 1998 TECHNICAL DATA: PRESSING FORCE: 75 T SPECIFIC PRESSING FORCE: 9,09 KG/CM² CHANNEL SIZE: 750 X 1.100 MM BALE WEIGHT: 500-750 KG, DEPENDING ON THE MATERIAL AND BALE LENGTH FILLER: 1.550 X 1.020 MM POWER: 45 KW CAPACITY: 280 M³/H PRESS POWER: -APPROX. 9,5 T/H AT DEPARTMENT STORE (35 KG / M³ BULK WEIGHT) -APPROX. 16.5 T/H FOR MIXED PAPER (60 KG / M³ BULK WEIGHT) -APPROX. 26,0 T/H FOR COLLECTING GOODS (100 KG / M³ BULK WEIGHT) SETTING: 4 X VERTICAL PREPARATION FOR AN ADDITIONAL 3 X HORIZONTAL SETTING WIRBULATOR 15 KW MACHINE WEIGHT: APPROX. 24,0 T
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-chain conveyor with swan neck

manufacturer: paal gmbh
year of construction: 2011
conveyor belt width: 1,400 mm
band history: 4.40 m rising 30 degrees, falling 1.50 m
conveyor speed: 0.27 m/sec
drive: 2,2 kw

in very good condition! CHAIN CONVEYOR WITH SWAN NECK MANUFACTURER: PAAL GMBH YEAR OF CONSTRUCTION: 2011 CONVEYOR BELT WIDTH: 1,400 MM BAND HISTORY: 4.40 M RISING 30 DEGREES, FALLING 1.50 M CONVEYOR SPEED: 0.27 M/SEC DRIVE: 2,2 KW IN VERY GOOD CONDITION!
Vendedor: Tank und Apparate Barth GmbH
Año de construcción: usado
Ubicación: Land-semi automatic baler

manufacturer: paal

type: pac

year of construction: will be submitted

technical data:

pressing force: 13,5 t
power: 11 kw
capacity: 80 m³/h
filler: 680 x 600 mm
channel size: 700 x 650 mm
bale weights: up to approx. 200 kg
machine weight: 1.650 kg
    SEMI AUTOMATIC BALER MANUFACTURER: PAAL TYPE: PAC YEAR OF CONSTRUCTION: WILL BE SUBMITTED TECHNICAL DATA: PRESSING FORCE: 13,5 T POWER: 11 KW CAPACITY: 80 M³/H FILLER: 680 X 600 MM CHANNEL SIZE: 700 X 650 MM BALE WEIGHTS: UP TO APPROX. 200 KG MACHINE WEIGHT: 1.650 KG
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-automatic baler manufacturer: paal

type: konti 425 c / (k)

year of construction: 1998

main parts of the press:
1 automatic channel press
1 automatic binding system
1 hydraulic system
1 electric control specifications:
pressing force: 1.000 kn / 100 t
specific pressing force: 121,2 n / cm²
filler: 2.000 x 1.020 mm
duct cross-section (h x w): 75 x 110 cm
number of binding wires: 4 units vertical
including preparation for additional 3 x horizontal setting
drive performance:
-main pump: 3 x 45 kw
-wire drawing: 4 kw
-transposing: 3 kw
throughput: up to 460 m³/h
bale weight: up to approx. 700 kg depending on the pressed product and bale length
operating voltage: 3 x 400 vac, 50 hz / n / pe
weight: approx.  36 t 

special equipment of the press:
- reduce the filling opening adjustable printing plate position
- automatic stamper
- complete set of wire train stations (8 pieces) for 500 kg coils for the vertical setting

note:

a complete repair was beginning 2017 for about € 30.000,00 performed!    AUTOMATIC BALER MANUFACTURER: PAAL TYPE: KONTI 425 C / (K) YEAR OF CONSTRUCTION: 1998 MAIN PARTS OF THE PRESS: 1 AUTOMATIC CHANNEL PRESS 1 AUTOMATIC BINDING SYSTEM 1 HYDRAULIC SYSTEM 1 ELECTRIC CONTROL SPECIFICATIONS: PRESSING FORCE: 1.000 KN / 100 T SPECIFIC PRESSING FORCE: 121,2 N / CM² FILLER: 2.000 X 1.020 MM DUCT CROSS-SECTION (H X W): 75 X 110 CM NUMBER OF BINDING WIRES: 4 UNITS VERTICAL INCLUDING PREPARATION FOR ADDITIONAL 3 X HORIZONTAL SETTING DRIVE PERFORMANCE: -MAIN PUMP: 3 X 45 KW -WIRE DRAWING: 4 KW -TRANSPOSING: 3 KW THROUGHPUT: UP TO 460 M³/H BALE WEIGHT: UP TO APPROX. 700 KG DEPENDING ON THE PRESSED PRODUCT AND BALE LENGTH OPERATING VOLTAGE: 3 X 400 VAC, 50 HZ / N / PE WEIGHT: APPROX. 36 T SPECIAL EQUIPMENT OF THE PRESS: - REDUCE THE FILLING OPENING ADJUSTABLE PRINTING PLATE POSITION - AUTOMATIC STAMPER - COMPLETE SET OF WIRE TRAIN STATIONS (8 PIECES) FOR 500 KG COILS FOR THE VERTICAL SETTING NOTE: A COMPLETE REPAIR WAS BEGINNING 2017 FOR ABOUT € 30.000,00 PERFORMED!
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-1 paal horizontal tunel press type pac, year 1997, tunel section 60 x 70 cm, bale measuring, tying through 4 horizontal wire insertion, machine was used for pressing textile waste dust, with dust suplying cyclone, by removing dust cyclone it can be used for pressing any material 1 PAAL HORIZONTAL TUNEL PRESS TYPE PAC, YEAR 1997, TUNEL SECTION 60 X 70 CM, BALE MEASURING, TYING THROUGH 4 HORIZONTAL WIRE INSERTION, MACHINE WAS USED FOR PRESSING TEXTILE WASTE DUST, WITH DUST SUPLYING CYCLONE, BY REMOVING DUST CYCLONE IT CAN BE USED FOR PRESSING ANY MATERIAL
Vendedor: LUSAMATEX - Máquinas Têxteis, Lda.
Año de construcción: usado
Precio: 42.500 €
Ubicación: Land-technical data:
pressing force 115 sound
channel cross section 750 x 110 mm
filling volume 2.4 m ³
filling opening 1020 x 2000 mm
motor 3 x 45 kw
bale weight 550-850 kg / subject of press well and bale length
setting ' 5 times vertical
machine weight up to about 36 ton
     TECHNICAL DATA: PRESSING FORCE 115 SOUND CHANNEL CROSS SECTION 750 X 110 MM FILLING VOLUME 2.4 M ³ FILLING OPENING 1020 X 2000 MM MOTOR 3 X 45 KW BALE WEIGHT 550-850 KG / SUBJECT OF PRESS WELL AND BALE LENGTH SETTING ' 5 TIMES VERTICAL MACHINE WEIGHT UP TO ABOUT 36 TON
Vendedor: MultiNET International b.v.
Año de construcción: usado
Ubicación: Land-manufacturer	paal, georgsmarienhütte, germany
type	pacomat is so
year of construction	1990
press power	35 t
feed channel	800 x 650 mm 
drive power	18,5 kw
tying system	3-fold horizontal, automated
channel cross section	700 x 800 mm
bale size	700 x 700 mm, length adjustable
bale weight	up to 300 kg depending on material and bale length
throughput rate	up to 45 m³/h using loose material
machine weight approx. 6.000 kg
conveyor belt	type kel 800
manufacturer	paal
velocity of belt	0,27 m/sec
drive power	2,2 kw
effective width	approx. 800 mm
distance between axles	approx. 11.250 mm
feeding conveyor length	approx. 7.155 mm
elevating conveyor length	approx. 3.395 mm
grade	28°

please note:
all technical data refer to specifications of producer/owner. 
we will not assume liability for the given statements and possible errors.
this offer is non-binding, prior sale excepted and revocable at any time.
inspections are possible after agreement.				
the sale against prepayment is ex location, as it stands and lays, without any oil or wire, and without liability and guarantee.


MANUFACTURER PAAL, GEORGSMARIENHüTTE, GERMANY TYPE PACOMAT IS SO YEAR OF CONSTRUCTION 1990 PRESS POWER 35 T FEED CHANNEL 800 X 650 MM DRIVE POWER 18,5 KW TYING SYSTEM 3-FOLD HORIZONTAL, AUTOMATED CHANNEL CROSS SECTION 700 X 800 MM BALE SIZE 700 X 700 MM, LENGTH ADJUSTABLE BALE WEIGHT UP TO 300 KG DEPENDING ON MATERIAL AND BALE LENGTH THROUGHPUT RATE UP TO 45 M³/H USING LOOSE MATERIAL MACHINE WEIGHT APPROX. 6.000 KG CONVEYOR BELT TYPE KEL 800 MANUFACTURER PAAL VELOCITY OF BELT 0,27 M/SEC DRIVE POWER 2,2 KW EFFECTIVE WIDTH APPROX. 800 MM DISTANCE BETWEEN AXLES APPROX. 11.250 MM FEEDING CONVEYOR LENGTH APPROX. 7.155 MM ELEVATING CONVEYOR LENGTH APPROX. 3.395 MM GRADE 28° PLEASE NOTE: ALL TECHNICAL DATA REFER TO SPECIFICATIONS OF PRODUCER/OWNER. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN STATEMENTS AND POSSIBLE ERRORS. THIS OFFER IS NON-BINDING, PRIOR SALE EXCEPTED AND REVOCABLE AT ANY TIME. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. THE SALE AGAINST PREPAYMENT IS EX LOCATION, AS IT STANDS AND LAYS, WITHOUT ANY OIL OR WIRE, AND WITHOUT LIABILITY AND GUARANTEE.
Vendedor: RDA Recycling Machinery GmbH
Año de construcción: usado
Ubicación: Land-automatic baler
 
manufacturer: paal
 
type: pacomat is
 
year of construction: 1989
 
 
technical data:
pressing force: 27 t
specific pressing force: 5.51 kg / cm²
channel size: 700 x 700 mm
filler: 800 x 650 mm 
power: 22 kw
capacity: 115 m³/h
 
 
optional with infeed conveyor
 
manufacturer: paal
type: kel 800
conveyor width: 800 mm
task length: 2.000 mm
inclining length: approx. 4.500 mm   AUTOMATIC BALER MANUFACTURER: PAAL TYPE: PACOMAT IS YEAR OF CONSTRUCTION: 1989 TECHNICAL DATA: PRESSING FORCE: 27 T SPECIFIC PRESSING FORCE: 5.51 KG / CM² CHANNEL SIZE: 700 X 700 MM FILLER: 800 X 650 MM POWER: 22 KW CAPACITY: 115 M³/H OPTIONAL WITH INFEED CONVEYOR MANUFACTURER: PAAL TYPE: KEL 800 CONVEYOR WIDTH: 800 MM TASK LENGTH: 2.000 MM INCLINING LENGTH: APPROX. 4.500 MM
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-automatic baler

manufacturer: paal

type: konti 700 f

year of construction: 2008

technical data:
pressing force: 170 t
specific pressing force: 14 kg / cm²
power: 3 x 75 kw (main pump)
performance under operating conditions: approximately 650 m³/h
filler: 2,000 x 1,020 mm
channel cross-section: 1,100 x 1,100 mm (h x w)
bale size: 1,100 x 1,100 mm
setting: 5 x vertical
weight: approx. 47 t

special features of the press:
• reduce the filling opening adjustable printing plate position
• automatic schneidkantenfreistosser
• complete set of wire train stations (10 pcs.) for 500 kg coils
• bale chute
• key locking system
• operator panel

optional with infeed conveyor

  AUTOMATIC BALER MANUFACTURER: PAAL TYPE: KONTI 700 F YEAR OF CONSTRUCTION: 2008 TECHNICAL DATA: PRESSING FORCE: 170 T SPECIFIC PRESSING FORCE: 14 KG / CM² POWER: 3 X 75 KW (MAIN PUMP) PERFORMANCE UNDER OPERATING CONDITIONS: APPROXIMATELY 650 M³/H FILLER: 2,000 X 1,020 MM CHANNEL CROSS-SECTION: 1,100 X 1,100 MM (H X W) BALE SIZE: 1,100 X 1,100 MM SETTING: 5 X VERTICAL WEIGHT: APPROX. 47 T SPECIAL FEATURES OF THE PRESS: &BULL; REDUCE THE FILLING OPENING ADJUSTABLE PRINTING PLATE POSITION &BULL; AUTOMATIC SCHNEIDKANTENFREISTOSSER &BULL; COMPLETE SET OF WIRE TRAIN STATIONS (10 PCS.) FOR 500 KG COILS &BULL; BALE CHUTE &BULL; KEY LOCKING SYSTEM &BULL; OPERATOR PANEL OPTIONAL WITH INFEED CONVEYOR
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-utomatic baler manufacturer: paal

type: konti 425 b

year of construction: 1989

main parts of the press:
1 automatic channel press
1 automatic binding system
1 hydraulic system
1 electric control specifications:
pressing force: 1,000 kn / 100 t
filler: 2,000 x 1,020 mm
chanel cross-section (h x w): 75 x 110 cm
number of binding wires: 4 units vertical
drive performance:
-main pump: 2 x 55 kw
-wire drawing: 4 kw
-transposing: 3 kw
throughput: up to approx. 400 m³/h
bale weight: up to approx. 700 kg depending on the pressed product and bale length
operating voltage: 3 x 400 vac, 50 hz / n / pe   UTOMATIC BALER MANUFACTURER: PAAL TYPE: KONTI 425 B YEAR OF CONSTRUCTION: 1989 MAIN PARTS OF THE PRESS: 1 AUTOMATIC CHANNEL PRESS 1 AUTOMATIC BINDING SYSTEM 1 HYDRAULIC SYSTEM 1 ELECTRIC CONTROL SPECIFICATIONS: PRESSING FORCE: 1,000 KN / 100 T FILLER: 2,000 X 1,020 MM CHANEL CROSS-SECTION (H X W): 75 X 110 CM NUMBER OF BINDING WIRES: 4 UNITS VERTICAL DRIVE PERFORMANCE: -MAIN PUMP: 2 X 55 KW -WIRE DRAWING: 4 KW -TRANSPOSING: 3 KW THROUGHPUT: UP TO APPROX. 400 M³/H BALE WEIGHT: UP TO APPROX. 700 KG DEPENDING ON THE PRESSED PRODUCT AND BALE LENGTH OPERATING VOLTAGE: 3 X 400 VAC, 50 HZ / N / PE
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-automatic baler with there setting

manufacturer: paal

type: konti 200 c / (k)

year of construction: 1993

technical data:
pressing force: 50 t
channel size: 750 x 1,100 mm
specific pressing force: 6.06 kg / cm²
bale weight: 425-550 kg, depending on the material and bale length
filler: 1.400 x 1.020 mm
power: 30 kw
capacity: 145 m³/h
press power:
-loose approx. 3 t / h at department store (20 kg / m³ bulk weight)
-layered approx. 5 t / h at department store (35 kg / m³ bulk weight)
-about 7 t / h for mixed paper (60 kg / m³ bulk weight)
-about 12 t / h for collecting goods (100 kg / m³ bulk weight)
setting: 4 x vertical 
machine weight: approx. 17 t
  AUTOMATIC BALER WITH THERE SETTING MANUFACTURER: PAAL TYPE: KONTI 200 C / (K) YEAR OF CONSTRUCTION: 1993 TECHNICAL DATA: PRESSING FORCE: 50 T CHANNEL SIZE: 750 X 1,100 MM SPECIFIC PRESSING FORCE: 6.06 KG / CM² BALE WEIGHT: 425-550 KG, DEPENDING ON THE MATERIAL AND BALE LENGTH FILLER: 1.400 X 1.020 MM POWER: 30 KW CAPACITY: 145 M³/H PRESS POWER: -LOOSE APPROX. 3 T / H AT DEPARTMENT STORE (20 KG / M³ BULK WEIGHT) -LAYERED APPROX. 5 T / H AT DEPARTMENT STORE (35 KG / M³ BULK WEIGHT) -ABOUT 7 T / H FOR MIXED PAPER (60 KG / M³ BULK WEIGHT) -ABOUT 12 T / H FOR COLLECTING GOODS (100 KG / M³ BULK WEIGHT) SETTING: 4 X VERTICAL MACHINE WEIGHT: APPROX. 17 T
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-automatic baler
 
manufacturer: paal
 
type: likon 325 c.

year of construction: 1997
 
technical data:
pressing force: 100 t
specific pressing force: 9.6 kg / cm²
channel format: 1100 x 950 mm
filler: 1.750 x 870 mm
setting: 5 x horizontal
power: 2 x 45 kw
capacity: approx. 410 m ³/h under operating conditions
machine weight: 23 tons   AUTOMATIC BALER MANUFACTURER: PAAL TYPE: LIKON 325 C. YEAR OF CONSTRUCTION: 1997 TECHNICAL DATA: PRESSING FORCE: 100 T SPECIFIC PRESSING FORCE: 9.6 KG / CM² CHANNEL FORMAT: 1100 X 950 MM FILLER: 1.750 X 870 MM SETTING: 5 X HORIZONTAL POWER: 2 X 45 KW CAPACITY: APPROX. 410 M ³/H UNDER OPERATING CONDITIONS MACHINE WEIGHT: 23 TONS
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-automatic baler
  
manufacturer: paal
 
type: likon a 110

year of construction: 1979
 
technical data:
pressing force: 45 t
power: 30 kw
capacity: ca. 160-200 m ³/h
bale size: 700 x 1,100 mm (wxh)
filler: 630 x 1,100 mm
bale weights: up to approx. 550 kg     AUTOMATIC BALER MANUFACTURER: PAAL TYPE: LIKON A 110 YEAR OF CONSTRUCTION: 1979 TECHNICAL DATA: PRESSING FORCE: 45 T POWER: 30 KW CAPACITY: CA. 160-200 M ³/H BALE SIZE: 700 X 1,100 MM (WXH) FILLER: 630 X 1,100 MM BALE WEIGHTS: UP TO APPROX. 550 KG
Vendedor: Brauner Recyclingtech GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)