41 ofertas

Año de construcción: usado
Ubicación: Land--machine in stock
-very good condition
-well-known brand pallmann

technical parameters:

-maximum width 1000 mm
-maximum height 220 mm

-main engine 132 kw
-feeding motors 2 x 5 kw
-hydraulic pump motor 3 kw
-3 knives

-the rotor length 1040 mm
-rotor diameter 1000 mm
-sieve 20 mm x 30 mm

– three upper shafts extending
-four lower shafts extending

-lifting hydraulic rotor guards
-raising shaft pulling the hydraulically

overall dimensions of the machine

-length: 440 cm
-width: 260 cm
-height 260 cm
-weight ~ 18000 kg
 -MACHINE IN STOCK -VERY GOOD CONDITION -WELL-KNOWN BRAND PALLMANN TECHNICAL PARAMETERS: -MAXIMUM WIDTH 1000 MM -MAXIMUM HEIGHT 220 MM -MAIN ENGINE 132 KW -FEEDING MOTORS 2 X 5 KW -HYDRAULIC PUMP MOTOR 3 KW -3 KNIVES -THE ROTOR LENGTH 1040 MM -ROTOR DIAMETER 1000 MM -SIEVE 20 MM X 30 MM – THREE UPPER SHAFTS EXTENDING -FOUR LOWER SHAFTS EXTENDING -LIFTING HYDRAULIC ROTOR GUARDS -RAISING SHAFT PULLING THE HYDRAULICALLY OVERALL DIMENSIONS OF THE MACHINE -LENGTH: 440 CM -WIDTH: 260 CM -HEIGHT 260 CM -WEIGHT ~ 18000 KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-granulator (1x), make pallmann kg zweibrücken, type ps 12-18, no 1018.94.001, new 1995, material mild steel, rotor width 1800mm, rotor diameter 1200mm, open rotor, inlet 1200x1840mm, hinged top, motor 315 kw, 6000 volt, weight ± 20.500 kggranulatorsgrinders > granulators GRANULATOR (1X), MAKE PALLMANN KG ZWEIBRüCKEN, TYPE PS 12-18, NO 1018.94.001, NEW 1995, MATERIAL MILD STEEL, ROTOR WIDTH 1800MM, ROTOR DIAMETER 1200MM, OPEN ROTOR, INLET 1200X1840MM, HINGED TOP, MOTOR 315 KW, 6000 VOLT, WEIGHT ± 20.500 KGGRANULATORSGRINDERS > GRANULATORS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-stock# up5988 
second hand twin shaft shredder by pallmann (germany) type psd 300. milling chamber has internal dimensions 550 mm x 850 mm. two shafts are driven by el motor 37 kw and gearbox. machine is mounted on carbon steel supports. STOCK# UP5988 SECOND HAND TWIN SHAFT SHREDDER BY PALLMANN (GERMANY) TYPE PSD 300. MILLING CHAMBER HAS INTERNAL DIMENSIONS 550 MM X 850 MM. TWO SHAFTS ARE DRIVEN BY EL MOTOR 37 KW AND GEARBOX. MACHINE IS MOUNTED ON CARBON STEEL SUPPORTS.
Vendedor: Perry Machinery Poland
Año de construcción: usado
Ubicación: Land-granulator (1x), make pallmann kg zweibrücken, type ps 8-15, no 511.81.001, new 1982, material mild steel, rotor width 1500mm, rotor diameter 800mm, number of rotor knives 12, number of stator knives: 8, inlet 820x1520mm, hinged top, motor 155,0 kw, 6000 volt, mounted on frame, floorspace 3,1x2,8 m, total height 1,9 m, weight 12.000 kg, extra specifications - sieve perforation 10x10mmgranulatorsgrinders > granulators GRANULATOR (1X), MAKE PALLMANN KG ZWEIBRüCKEN, TYPE PS 8-15, NO 511.81.001, NEW 1982, MATERIAL MILD STEEL, ROTOR WIDTH 1500MM, ROTOR DIAMETER 800MM, NUMBER OF ROTOR KNIVES 12, NUMBER OF STATOR KNIVES: 8, INLET 820X1520MM, HINGED TOP, MOTOR 155,0 KW, 6000 VOLT, MOUNTED ON FRAME, FLOORSPACE 3,1X2,8 M, TOTAL HEIGHT 1,9 M, WEIGHT 12.000 KG, EXTRA SPECIFICATIONS - SIEVE PERFORATION 10X10MMGRANULATORSGRINDERS > GRANULATORS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-intake opening: 408 x 510 mmrotor - ã?: 400 mm5 rotor blades, width: 500 mmdrehzahl: 640 upmantriebsmotor: kwplatzbedarf 400 v, 30: 1230 x 950 x 1550 mm: 900 kg  INTAKE OPENING: 408 X 510 MMROTOR - Ã?: 400 MM5 ROTOR BLADES, WIDTH: 500 MMDREHZAHL: 640 UPMANTRIEBSMOTOR: KWPLATZBEDARF 400 V, 30: 1230 X 950 X 1550 MM: 900 KG
Vendedor: Kurt Steiger Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-granulator (1x), make pallmann, type ps 8-12, no 2470037, new 1970, material mild steel, rotor width 1200mm, rotor diameter 800mm, open rotor, number of rotor knives 4, number of stator knives: 3, with hopper, inlet 1280x600mm, without motor (110 kw), rotor speed max. 340 rpm, sieve perforation ± 30x30mmgranulatorsgrinders > granulators GRANULATOR (1X), MAKE PALLMANN, TYPE PS 8-12, NO 2470037, NEW 1970, MATERIAL MILD STEEL, ROTOR WIDTH 1200MM, ROTOR DIAMETER 800MM, OPEN ROTOR, NUMBER OF ROTOR KNIVES 4, NUMBER OF STATOR KNIVES: 3, WITH HOPPER, INLET 1280X600MM, WITHOUT MOTOR (110 KW), ROTOR SPEED MAX. 340 RPM, SIEVE PERFORATION ± 30X30MMGRANULATORSGRINDERS > GRANULATORS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-stock# u2296-4

used carbon steel grinding mill by pallmann (germany) model ref l18. mill has diameter of milling elements 180 mm. milling chamber is equipped with two grinding tracks and five blades rotor working with rotation 5500 and 11000 rpm. rotor is belt driven by el. motor 3.2/2.6 kw, 2920/1450 rpm, 400/220 v, 50 hz.  product is feeded via aeg vibrating feeder with adjustable frequency of vibration. also there is an liquid feeding connection at product inlet. bottom central discharge. mill is equipped with electric control panel and dust filter. mounted on carbon steel supporting frame. includes electric drawings and set of additional parts - like grinding tracks and rotors. 
 STOCK# U2296-4 USED CARBON STEEL GRINDING MILL BY PALLMANN (GERMANY) MODEL REF L18. MILL HAS DIAMETER OF MILLING ELEMENTS 180 MM. MILLING CHAMBER IS EQUIPPED WITH TWO GRINDING TRACKS AND FIVE BLADES ROTOR WORKING WITH ROTATION 5500 AND 11000 RPM. ROTOR IS BELT DRIVEN BY EL. MOTOR 3.2/2.6 KW, 2920/1450 RPM, 400/220 V, 50 HZ. PRODUCT IS FEEDED VIA AEG VIBRATING FEEDER WITH ADJUSTABLE FREQUENCY OF VIBRATION. ALSO THERE IS AN LIQUID FEEDING CONNECTION AT PRODUCT INLET. BOTTOM CENTRAL DISCHARGE. MILL IS EQUIPPED WITH ELECTRIC CONTROL PANEL AND DUST FILTER. MOUNTED ON CARBON STEEL SUPPORTING FRAME. INCLUDES ELECTRIC DRAWINGS AND SET OF ADDITIONAL PARTS - LIKE GRINDING TRACKS AND ROTORS.
Vendedor: Perry Machinery Poland
Año de construcción: usado
Ubicación: Land-granulator (1x), make pallmann, type ps 8-12, no 113.75013, new 1975, material mild steel, rotor width 1200mm, rotor diameter 800mm, number of rotor knives 12, number of stator knives: 8, screens are missing, inlet 1300x860mm, hinged top, motor 132,0 kw, 400/690 volt, mounted on frame, floorspace 3,5x2,2 m, total height 2,2 m, weight 8000 kggranulatorsgrinders > granulators GRANULATOR (1X), MAKE PALLMANN, TYPE PS 8-12, NO 113.75013, NEW 1975, MATERIAL MILD STEEL, ROTOR WIDTH 1200MM, ROTOR DIAMETER 800MM, NUMBER OF ROTOR KNIVES 12, NUMBER OF STATOR KNIVES: 8, SCREENS ARE MISSING, INLET 1300X860MM, HINGED TOP, MOTOR 132,0 KW, 400/690 VOLT, MOUNTED ON FRAME, FLOORSPACE 3,5X2,2 M, TOTAL HEIGHT 2,2 M, WEIGHT 8000 KGGRANULATORSGRINDERS > GRANULATORS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-stock# u2293-1

used stainless steel contact parts horizontal hammer mill by pallmann (germany) type phm 600-350. mill has internal dimensions of milling chamber l 600 mm x w 350 mm. top of milling chamber is manually rised. at the bottom mill has a discharge outlet through the screen. at the top of milling chamber there is installed static knife for grinding of product. rotor has diameter 500 mm x width 345 mm. on the rotor there are 24 rows with hammers, each row consist of 4 hammers. total number of hammers is 96. rotor and hammers are designed in non-corrosive steel. rotor is belt driven by el. motor 75 kw, 2975 rpm, 380/660 v, 50 hz. mill has side feeding inlet with dimensions 350 mm x 265 mm. product is moved into milling chamber through three screws. screws are driven by el. motor 0.55 kw, 2800 rpm, 220/380v, 50 hz and varispeed gearbox with manual adjustment of outgoing rotation. mill is equipped with electric cabinet, belt cover and set of screens (6 pcs).
 STOCK# U2293-1 USED STAINLESS STEEL CONTACT PARTS HORIZONTAL HAMMER MILL BY PALLMANN (GERMANY) TYPE PHM 600-350. MILL HAS INTERNAL DIMENSIONS OF MILLING CHAMBER L 600 MM X W 350 MM. TOP OF MILLING CHAMBER IS MANUALLY RISED. AT THE BOTTOM MILL HAS A DISCHARGE OUTLET THROUGH THE SCREEN. AT THE TOP OF MILLING CHAMBER THERE IS INSTALLED STATIC KNIFE FOR GRINDING OF PRODUCT. ROTOR HAS DIAMETER 500 MM X WIDTH 345 MM. ON THE ROTOR THERE ARE 24 ROWS WITH HAMMERS, EACH ROW CONSIST OF 4 HAMMERS. TOTAL NUMBER OF HAMMERS IS 96. ROTOR AND HAMMERS ARE DESIGNED IN NON-CORROSIVE STEEL. ROTOR IS BELT DRIVEN BY EL. MOTOR 75 KW, 2975 RPM, 380/660 V, 50 HZ. MILL HAS SIDE FEEDING INLET WITH DIMENSIONS 350 MM X 265 MM. PRODUCT IS MOVED INTO MILLING CHAMBER THROUGH THREE SCREWS. SCREWS ARE DRIVEN BY EL. MOTOR 0.55 KW, 2800 RPM, 220/380V, 50 HZ AND VARISPEED GEARBOX WITH MANUAL ADJUSTMENT OF OUTGOING ROTATION. MILL IS EQUIPPED WITH ELECTRIC CABINET, BELT COVER AND SET OF SCREENS (6 PCS).
Vendedor: Perry Machinery Poland
Año de construcción: usado
Ubicación: Land-turbo cone mill (3x), make pallmann, type ref8, no 0367293, 0368320, 0370349, new 1967, 1969, 1970, material mild steel, rotor size dia. 800mm, inlet dia. 200mm, without motor, speed max. 2600 rpm, floorspace 1,5x1,1 m, total height 1,8 m, extra specifications have sharp ribs, distance heart to heart 6 mmsize reduction millsgrinders > size reduction mills TURBO CONE MILL (3X), MAKE PALLMANN, TYPE REF8, NO 0367293, 0368320, 0370349, NEW 1967, 1969, 1970, MATERIAL MILD STEEL, ROTOR SIZE DIA. 800MM, INLET DIA. 200MM, WITHOUT MOTOR, SPEED MAX. 2600 RPM, FLOORSPACE 1,5X1,1 M, TOTAL HEIGHT 1,8 M, EXTRA SPECIFICATIONS HAVE SHARP RIBS, DISTANCE HEART TO HEART 6 MMSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-stock number: u2293-2
used carbon steel grinding/refining mill by pallmann (germany) model pr8. mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. belt driven by el. motor 100 kw, 1480 rpm, 380 v, 50 hz. manual adjustment of gap between milling plates. mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. front door bolted with central feeding inlet through feeding chute. bottom discharge. STOCK NUMBER: U2293-2 USED CARBON STEEL GRINDING/REFINING MILL BY PALLMANN (GERMANY) MODEL PR8. MILL HAS BOLTED ROTOR WITH DIAMETER 795 MM AND STATOR WITH DIAMETER 800 MM. BELT DRIVEN BY EL. MOTOR 100 KW, 1480 RPM, 380 V, 50 HZ. MANUAL ADJUSTMENT OF GAP BETWEEN MILLING PLATES. MILL HAS MOUNTED 5 NOZZLES FOR FEEDING GAS OR LIQUID INSIDE THE MILLING CHAMBER. FRONT DOOR BOLTED WITH CENTRAL FEEDING INLET THROUGH FEEDING CHUTE. BOTTOM DISCHARGE.
Vendedor: Perry Machinery Poland
Año de construcción: usado
Ubicación: Land-hammer mill (1x), make pallmann, type phm-600x350, no 442.89.005, new 1989, material stainless steel, rotor size dia. 600x350mm, moving hammers, with sieve cage, with grinding track, inlet 355x75mm, motor 75,0 kw, 380/660 volt, speed max. 3300 rpm, mounted on frame, floorspace mill without drive unit 1,1x0,9 m, total height 1,3 msize reduction millsgrinders > size reduction mills HAMMER MILL (1X), MAKE PALLMANN, TYPE PHM-600X350, NO 442.89.005, NEW 1989, MATERIAL STAINLESS STEEL, ROTOR SIZE DIA. 600X350MM, MOVING HAMMERS, WITH SIEVE CAGE, WITH GRINDING TRACK, INLET 355X75MM, MOTOR 75,0 KW, 380/660 VOLT, SPEED MAX. 3300 RPM, MOUNTED ON FRAME, FLOORSPACE MILL WITHOUT DRIVE UNIT 1,1X0,9 M, TOTAL HEIGHT 1,3 MSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-output: 1.8t/h, inlet opening: 1120x1420mm, material inlet dimensions/ conveyor belt with metal detecotr: 800x5000mm, number and length of blades: 3x 700mm, rotor diameter: 1000mm, rotor type: bevel cut sd 9, number of blade rows: 9, number of rotor blades: 18, connected load: 132kw, circular hole diameter: 6mm.  OUTPUT: 1.8T/H, INLET OPENING: 1120X1420MM, MATERIAL INLET DIMENSIONS/ CONVEYOR BELT WITH METAL DETECOTR: 800X5000MM, NUMBER AND LENGTH OF BLADES: 3X 700MM, ROTOR DIAMETER: 1000MM, ROTOR TYPE: BEVEL CUT SD 9, NUMBER OF BLADE ROWS: 9, NUMBER OF ROTOR BLADES: 18, CONNECTED LOAD: 132KW, CIRCULAR HOLE DIAMETER: 6MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-turbo cone mill (1x), make pallmann, type ref 6, no 57771, new 1957, material mild steel, rotor size dia. 600mm, inlet 185x185mm, motor 30,0 kw, 380 volt, speed 2850 rpm, mounted on frame, with switchgear, floorspace 2,0x1,6 m, total height 2,3 m, extra specifications - equipped with metal detector, make pulsotronic, type 8217/5000, with air pulse ejectionsize reduction millsgrinders > size reduction mills TURBO CONE MILL (1X), MAKE PALLMANN, TYPE REF 6, NO 57771, NEW 1957, MATERIAL MILD STEEL, ROTOR SIZE DIA. 600MM, INLET 185X185MM, MOTOR 30,0 KW, 380 VOLT, SPEED 2850 RPM, MOUNTED ON FRAME, WITH SWITCHGEAR, FLOORSPACE 2,0X1,6 M, TOTAL HEIGHT 2,3 M, EXTRA SPECIFICATIONS - EQUIPPED WITH METAL DETECTOR, MAKE PULSOTRONIC, TYPE 8217/5000, WITH AIR PULSE EJECTIONSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-turbo cone mill (1x), make pallmann, type pp 4, no 0668145, new 1968, material mild steel, 2 driven rotors, rotor size dia. 400mm, inlet 155x100mm, motor 15 kw + 7,5 kw, 380 volt, speed max. 4100 rpm, grinding disc 1450 rpm, with switchgear, floorspace 2,1x1,1 m, total height 0,8 msize reduction millsgrinders > size reduction mills TURBO CONE MILL (1X), MAKE PALLMANN, TYPE PP 4, NO 0668145, NEW 1968, MATERIAL MILD STEEL, 2 DRIVEN ROTORS, ROTOR SIZE DIA. 400MM, INLET 155X100MM, MOTOR 15 KW + 7,5 KW, 380 VOLT, SPEED MAX. 4100 RPM, GRINDING DISC 1450 RPM, WITH SWITCHGEAR, FLOORSPACE 2,1X1,1 M, TOTAL HEIGHT 0,8 MSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-output: 100-500kg/h, milling chamber diameter: 600mm, motor power: 45kw, length: 1800mm, width: 1650mm, height: 1220mm, granulate storage container dimensions: 700x1200mm, machine including extraction, granulate pre-separator, compressore, hot melt granulator, screw and intermediate container.  OUTPUT: 100-500KG/H, MILLING CHAMBER DIAMETER: 600MM, MOTOR POWER: 45KW, LENGTH: 1800MM, WIDTH: 1650MM, HEIGHT: 1220MM, GRANULATE STORAGE CONTAINER DIMENSIONS: 700X1200MM, MACHINE INCLUDING EXTRACTION, GRANULATE PRE-SEPARATOR, COMPRESSORE, HOT MELT GRANULATOR, SCREW AND INTERMEDIATE CONTAINER.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-grinder (1x), make pallmann kg zweibrücken, type ref-l18, no 1778280, new 1978, material mild steel, rotor size dia. 180mm, with grinding track, with hopper, feeding with vibro feeder make aeg, type dr-50, motor ± 3,0 kw, mounted on frame, with switch , with various spare parts, floorspace 1,2x0,8 m, total height 2,2 m, weight 380 kgsize reduction millsgrinders > size reduction mills GRINDER (1X), MAKE PALLMANN KG ZWEIBRüCKEN, TYPE REF-L18, NO 1778280, NEW 1978, MATERIAL MILD STEEL, ROTOR SIZE DIA. 180MM, WITH GRINDING TRACK, WITH HOPPER, FEEDING WITH VIBRO FEEDER MAKE AEG, TYPE DR-50, MOTOR ± 3,0 KW, MOUNTED ON FRAME, WITH SWITCH , WITH VARIOUS SPARE PARTS, FLOORSPACE 1,2X0,8 M, TOTAL HEIGHT 2,2 M, WEIGHT 380 KGSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-drive: 55 kw / 1480 rpm / 500 v
speed rotor: 645 DRIVE: 55 KW / 1480 RPM / 500 V SPEED ROTOR: 645
Vendedor: Minox Maschinenhandels GmbH
Año de construcción: usado
Ubicación: Land-grinder universal mill (1x), make pallmann maschinenfabrik gmbh zweibrücken, type pxl-18, no 46380002, new 1980, material stainless steel, rotor size dia. 180mm, with grinding track, motor 5,5 kw, 400/690 volt, speed max. 12.000 rpm, floorspace 0,9x0,8 m, total height 1,0 m, weight 300 kgsize reduction millsgrinders > size reduction mills GRINDER UNIVERSAL MILL (1X), MAKE PALLMANN MASCHINENFABRIK GMBH ZWEIBRüCKEN, TYPE PXL-18, NO 46380002, NEW 1980, MATERIAL STAINLESS STEEL, ROTOR SIZE DIA. 180MM, WITH GRINDING TRACK, MOTOR 5,5 KW, 400/690 VOLT, SPEED MAX. 12.000 RPM, FLOORSPACE 0,9X0,8 M, TOTAL HEIGHT 1,0 M, WEIGHT 300 KGSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-45 kw<br/> <br>water cooling device,<br/> <br>rotor diameter: 600 mm<br/> <br> 45 KW

WATER COOLING DEVICE,

ROTOR DIAMETER: 600 MM

Vendedor: HERBOLD
Año de construcción: usado
Ubicación: Land-grinder, make pallmann maschinenfabrik gmbh, type pxl 18, no 0463.2007.0061, new 2008, material stainless steel, solid cone rotor, rotor size dia.180mm, fixed hammers, inlet +/- dia.53mm, motor 2,6 kw 380/420 volt, 3,1 kw 380/420 volt, speed 12000 / 17000 rpm, mounted on frame roestvaststaal, floorspace 0,95x0,65m, total height 1,25 msize reduction millsgrinders > size reduction mills GRINDER, MAKE PALLMANN MASCHINENFABRIK GMBH, TYPE PXL 18, NO 0463.2007.0061, NEW 2008, MATERIAL STAINLESS STEEL, SOLID CONE ROTOR, ROTOR SIZE DIA.180MM, FIXED HAMMERS, INLET +/- DIA.53MM, MOTOR 2,6 KW 380/420 VOLT, 3,1 KW 380/420 VOLT, SPEED 12000 / 17000 RPM, MOUNTED ON FRAME ROESTVASTSTAAL, FLOORSPACE 0,95X0,65M, TOTAL HEIGHT 1,25 MSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-granulator (18622) pallmann ps 4-12, 5 f3sd9<br><br>infeed opening: approx. 400 x 1250 mm<br>rotor width: approx. 1250 mm<br>rotor diameter: approx. 400 mm<br>stator knives: 3<br>rotor knives: 9<br>drive: 75 kw<br><br>water cooling housing, <br>in working condition, non-refurbished<br> GRANULATOR (18622) PALLMANN PS 4-12, 5 F3SD9

INFEED OPENING: APPROX. 400 X 1250 MM
ROTOR WIDTH: APPROX. 1250 MM
ROTOR DIAMETER: APPROX. 400 MM
STATOR KNIVES: 3
ROTOR KNIVES: 9
DRIVE: 75 KW

WATER COOLING HOUSING,
IN WORKING CONDITION, NON-REFURBISHED
Vendedor: HERBOLD
Año de construcción: usado
Ubicación: Land-plastic breaker / crusher pallmann type s4-2.57.5 kw PLASTIC BREAKER / CRUSHER PALLMANN TYPE S4-2.57.5 KW
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-infeed: 300 x 1000mm<br/> <br>rotor width: 1000 mm<br/> <br>rotor diameter: 400 mm<br/> <br>stator knives: 4x4<br/> <br>rotor knives: 3x4<br/> <br>drive: 55 kw INFEED: 300 X 1000MM

ROTOR WIDTH: 1000 MM

ROTOR DIAMETER: 400 MM

STATOR KNIVES: 4X4

ROTOR KNIVES: 3X4

DRIVE: 55 KW
Vendedor: HERBOLD
Año de construcción: usado
Ubicación: Land-infeed: 300 x 1000 mm<br/> <br>rotor width: 1000 mm<br/> <br>rotor diameter: 500 mm<br/> <br>stator knives: 12 x 4<br/> <br>rotor knives: <br>drive: 55 kw INFEED: 300 X 1000 MM

ROTOR WIDTH: 1000 MM

ROTOR DIAMETER: 500 MM

STATOR KNIVES: 12 X 4

ROTOR KNIVES:
DRIVE: 55 KW
Vendedor: HERBOLD
Año de construcción: usado
Ubicación: Land-â?¢ make: p
â?¢ year of construction: 2000 / overhauled in 2018
â?¢ type: pht 660 x 1050
â?¢ catchment width: 1050 mm
â?¢ feeder height: 660 mm
â?¢ rotor diameter: 2000 mm
â?¢ number of hoe blades: 3 pcs.
â?¢ 14 pcs. pick roller
â?¢ drive: 415 kw, capacity: 63to/h = rm/h 140
â?¢ einzugsvibrorinne: type vr - 1200 x 9000
â?¢ metal detector,
â?¢ task station
â?¢ compl. switchgear
â?¢ weight: 41 to &ACIRC;?&CENT; MAKE: P &ACIRC;?&CENT; YEAR OF CONSTRUCTION: 2000 / OVERHAULED IN 2018 &ACIRC;?&CENT; TYPE: PHT 660 X 1050 &ACIRC;?&CENT; CATCHMENT WIDTH: 1050 MM &ACIRC;?&CENT; FEEDER HEIGHT: 660 MM &ACIRC;?&CENT; ROTOR DIAMETER: 2000 MM &ACIRC;?&CENT; NUMBER OF HOE BLADES: 3 PCS. &ACIRC;?&CENT; 14 PCS. PICK ROLLER &ACIRC;?&CENT; DRIVE: 415 KW, CAPACITY: 63TO/H = RM/H 140 &ACIRC;?&CENT; EINZUGSVIBRORINNE: TYPE VR - 1200 X 9000 &ACIRC;?&CENT; METAL DETECTOR, &ACIRC;?&CENT; TASK STATION &ACIRC;?&CENT; COMPL. SWITCHGEAR &ACIRC;?&CENT; WEIGHT: 41 TO
Vendedor: Kayu Helvetica GmbH
Año de construcción: usado
Ubicación: Land-â?¢ drum debarking system
â?¢ make pallmann
â?¢ type: pdd 4-21
â?¢ year 1998
â?¢ max rh ã? 850 mm
â?¢ minimum rh ã? 50 mm
â?¢ number of antiebsachsen 4
â?¢ number of free-range axes 4
â?¢ installed power kw 235
â?¢ barrel length 21.000 mm
â?¢ drum ã? = 4,000 mm
â?¢ throughput rh t d/h 30-120
â?¢ incl. rh - task station
â?¢ bark disposal
â?¢ stammtransport &ACIRC;?&CENT; DRUM DEBARKING SYSTEM &ACIRC;?&CENT; MAKE PALLMANN &ACIRC;?&CENT; TYPE: PDD 4-21 &ACIRC;?&CENT; YEAR 1998 &ACIRC;?&CENT; MAX RH &ATILDE;? 850 MM &ACIRC;?&CENT; MINIMUM RH &ATILDE;? 50 MM &ACIRC;?&CENT; NUMBER OF ANTIEBSACHSEN 4 &ACIRC;?&CENT; NUMBER OF FREE-RANGE AXES 4 &ACIRC;?&CENT; INSTALLED POWER KW 235 &ACIRC;?&CENT; BARREL LENGTH 21.000 MM &ACIRC;?&CENT; DRUM &ATILDE;? = 4,000 MM &ACIRC;?&CENT; THROUGHPUT RH T D/H 30-120 &ACIRC;?&CENT; INCL. RH - TASK STATION &ACIRC;?&CENT; BARK DISPOSAL &ACIRC;?&CENT; STAMMTRANSPORT
Vendedor: Kayu Helvetica GmbH
Año de construcción: usado
Ubicación: Land-according to the description below ACCORDING TO THE DESCRIPTION BELOW
Vendedor: Remax Kunststofftechnik
Año de construcción: usado
Ubicación: Land-with fine screens
30 kw motor number of revolutions knife ring 1020 rpm
bat wheel 1450 rpm

have to sell even a pskm 8 WITH FINE SCREENS 30 KW MOTOR NUMBER OF REVOLUTIONS KNIFE RING 1020 RPM BAT WHEEL 1450 RPM HAVE TO SELL EVEN A PSKM 8
Vendedor: Schreinerei Faessler
Año de construcción: usado
Ubicación: Land-mill with knife ring system different sieves motor 18.5 kw
blast wheel 3280 turns in the minutes. 
diameter 70 cm  MILL WITH KNIFE RING SYSTEM DIFFERENT SIEVES MOTOR 18.5 KW BLAST WHEEL 3280 TURNS IN THE MINUTES. DIAMETER 70 CM
Vendedor: Schreinerei Faessler
Año de construcción: usado
Ubicación: Land-- drum shredder/shredder pallmann
- with inlet funnel
- serial number 0806.2006.0017  - DRUM SHREDDER/SHREDDER PALLMANN - WITH INLET FUNNEL - SERIAL NUMBER 0806.2006.0017
Vendedor: TILA GmbH
Año de construcción: usado
Ubicación: Land-NL Netherlands, 6202 Maastricht
Vendedor: used-machine-workx
Año de construcción: usado
Ubicación: Land-NL Netherlands, 6202 Maastricht
Vendedor: used-machine-workx
Año de construcción: usado
Ubicación: Land-the line i. a. consists of the following parts: raw material supply with conveyors, bark shredder pallmann pmr, bark screen, 3x bag forming and sealing machine hassia redatron flexibag 2, 2x palletizer, 2x stretchwrapper.  THE LINE I. A. CONSISTS OF THE FOLLOWING PARTS: RAW MATERIAL SUPPLY WITH CONVEYORS, BARK SHREDDER PALLMANN PMR, BARK SCREEN, 3X BAG FORMING AND SEALING MACHINE HASSIA REDATRON FLEXIBAG 2, 2X PALLETIZER, 2X STRETCHWRAPPER.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-working width_ 600 mm
working height_ 300 mm
n of knives_ 3

others available from stock  WORKING WIDTH_ 600 MM WORKING HEIGHT_ 300 MM N OF KNIVES_ 3 OTHERS AVAILABLE FROM STOCK
Vendedor: COLOMBO EREDI
Año de construcción: usado
Ubicación: Land-working hours 1700 

1. agglomerator/palltruder pfv 400

matrix diam.: 400 mm
no. of cutting knives: 2 units

2. drive motor 250 kw
3. sinfín de palas
4. pneumatic extration system
5. sorting device
6. steam extration + filter
7. control cabinet

not available: hot granulator type pshg 500x700 with motor 45 kw (ac) WORKING HOURS 1700 1. AGGLOMERATOR/PALLTRUDER PFV 400 MATRIX DIAM.: 400 MM NO. OF CUTTING KNIVES: 2 UNITS 2. DRIVE MOTOR 250 KW 3. SINFíN DE PALAS 4. PNEUMATIC EXTRATION SYSTEM 5. SORTING DEVICE 6. STEAM EXTRATION + FILTER 7. CONTROL CABINET NOT AVAILABLE: HOT GRANULATOR TYPE PSHG 500X700 WITH MOTOR 45 KW (AC)
Vendedor: MachinePoint
Año de construcción: usado
Ubicación: Land-make	        :	pallmann 
type	        :	pskm 15 
year of m.	:	1987 
condition	:	function checked 
capacity approx. bd:	4000 kg/h
grinding track diameter:1500 mm
grinding track width:	250 mm
screen width	:	2 x 120 mm
conidur screen	:	3 mm
airflow through machine:15000 m³/h
main motor size	:	250 kw
main motor incl.:	yes 
voltage	        :	380 v
frequency	:	50 hz

without grit separator (optional possible against sucharge)

machine has been completely revised at 2014/2015:
- new skf bearings
- new grooved ledges and conidur screens 3 mm
- new wear plates
 MAKE : PALLMANN TYPE : PSKM 15 YEAR OF M. : 1987 CONDITION : FUNCTION CHECKED CAPACITY APPROX. BD: 4000 KG/H GRINDING TRACK DIAMETER:1500 MM GRINDING TRACK WIDTH: 250 MM SCREEN WIDTH : 2 X 120 MM CONIDUR SCREEN : 3 MM AIRFLOW THROUGH MACHINE:15000 M³/H MAIN MOTOR SIZE : 250 KW MAIN MOTOR INCL.: YES VOLTAGE : 380 V FREQUENCY : 50 HZ WITHOUT GRIT SEPARATOR (OPTIONAL POSSIBLE AGAINST SUCHARGE) MACHINE HAS BEEN COMPLETELY REVISED AT 2014/2015: - NEW SKF BEARINGS - NEW GROOVED LEDGES AND CONIDUR SCREENS 3 MM - NEW WEAR PLATES
Vendedor: MODUL Systeme Engineering GmbH
Año de construcción: usado
Ubicación: Land-rotor speed: 965rpm, hopper side length horizontal/vertical: 600/400mm, motor: 63a/500v, fan: 16a/500v. ROTOR SPEED: 965RPM, HOPPER SIDE LENGTH HORIZONTAL/VERTICAL: 600/400MM, MOTOR: 63A/500V, FAN: 16A/500V.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-knife ring diameter: 800mm, knife length: 300mm, 28 knives. there are two machines available. one machine has been overhauled in 2010 and was not in use after that. KNIFE RING DIAMETER: 800MM, KNIFE LENGTH: 300MM, 28 KNIVES. THERE ARE TWO MACHINES AVAILABLE. ONE MACHINE HAS BEEN OVERHAULED IN 2010 AND WAS NOT IN USE AFTER THAT.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-material: steel
engine:	37 kw
weight:	900 kg
length x width x height: 1300 mm x 1000 mm x 900 mm

applicable for production of finest plastic-powder:

- finest powder without use of nitrogen
- best powder characteristic:
best flow behaviour, high apparent density and narrow particle distribution
- low grinding temperature, in terms of optimal ducting of the air
- fully automatic continous operation
- simple regluation of particle size.

throughput rate : 50 - 200 kg / h.

very good condition. 

**********

are you looking for something else?

write us below!

we project and build your entire plant exactly for your needs from used and new machines.   MATERIAL: STEEL ENGINE: 37 KW WEIGHT: 900 KG LENGTH X WIDTH X HEIGHT: 1300 MM X 1000 MM X 900 MM APPLICABLE FOR PRODUCTION OF FINEST PLASTIC-POWDER: - FINEST POWDER WITHOUT USE OF NITROGEN - BEST POWDER CHARACTERISTIC: BEST FLOW BEHAVIOUR, HIGH APPARENT DENSITY AND NARROW PARTICLE DISTRIBUTION - LOW GRINDING TEMPERATURE, IN TERMS OF OPTIMAL DUCTING OF THE AIR - FULLY AUTOMATIC CONTINOUS OPERATION - SIMPLE REGLUATION OF PARTICLE SIZE. THROUGHPUT RATE : 50 - 200 KG / H. VERY GOOD CONDITION. ********** ARE YOU LOOKING FOR SOMETHING ELSE? WRITE US BELOW! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.
Vendedor: Minox Maschinenhandels GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more PALLMANN types: