867 ofertas

Año de construcción: usado
Ubicación: Land-tunnel pasteurizer krones - sander hansen 50 000 pet /h

this machine was initially delivered and installed in 2007. it is two deck design with 5 pasteurization zones and 5 cooling zones. total treatment area is 276 m2 and heating media is saturated steam 3-9 bars. it has been only used approx 500 working hours for ice water and ice tea in pet bottles. the belts were changed and they have been operated only approx 100 working hours since belt change. the machine has been kept under maintenance and it is in excellent conditions.

technical specifications:

manufacturing year: 2007
make: krones - sander hansen
running hours: approx 500
condition: excellent condition
current location central america
availability: immediately
current status: installed
operating system: siemens s 7 plc, english language
treatment area: 276 m2
weigth (empty): 63.000 kg
weight (full / approx.): 143.00 kg
water volume in zones: 22.7 m3
water volume in buffers: 20 m3
material zones: stainless steel
number of decks: 2
number of belts: 2
number of regenerative zones: 5
number of pasteurization zones: 5
number of additional cooling zones: 1
belt width: 5.58 m
external width (including pumps and ops): 7.68 m
total length (ex. platforms): 27.00 m
platforms (front / back): +1m / side approx.
pump side from infeed: left
type of infeed conveyor: rexnord, 5 track, plastic, 425mm
type of out feed conveyor: rexnord, 5 track, plastic, 425mm
heating media: saturated steam at 3-9 bar, capacity 3370 kw
water – design flow: 85.3 m3/h
air consumption: 5 m3/h
conveyor type: intralox raised rip 400
conveyor status: perfect
conveyor material: polypropylene
main drive: planetary gear
electrical supply, phases: 3
voltage: 460 v ac
tolerances: +/- 10%
frequency: 60 hz   TUNNEL PASTEURIZER KRONES - SANDER HANSEN 50 000 PET /H THIS MACHINE WAS INITIALLY DELIVERED AND INSTALLED IN 2007. IT IS TWO DECK DESIGN WITH 5 PASTEURIZATION ZONES AND 5 COOLING ZONES. TOTAL TREATMENT AREA IS 276 M2 AND HEATING MEDIA IS SATURATED STEAM 3-9 BARS. IT HAS BEEN ONLY USED APPROX 500 WORKING HOURS FOR ICE WATER AND ICE TEA IN PET BOTTLES. THE BELTS WERE CHANGED AND THEY HAVE BEEN OPERATED ONLY APPROX 100 WORKING HOURS SINCE BELT CHANGE. THE MACHINE HAS BEEN KEPT UNDER MAINTENANCE AND IT IS IN EXCELLENT CONDITIONS. TECHNICAL SPECIFICATIONS: MANUFACTURING YEAR: 2007 MAKE: KRONES - SANDER HANSEN RUNNING HOURS: APPROX 500 CONDITION: EXCELLENT CONDITION CURRENT LOCATION CENTRAL AMERICA AVAILABILITY: IMMEDIATELY CURRENT STATUS: INSTALLED OPERATING SYSTEM: SIEMENS S 7 PLC, ENGLISH LANGUAGE TREATMENT AREA: 276 M2 WEIGTH (EMPTY): 63.000 KG WEIGHT (FULL / APPROX.): 143.00 KG WATER VOLUME IN ZONES: 22.7 M3 WATER VOLUME IN BUFFERS: 20 M3 MATERIAL ZONES: STAINLESS STEEL NUMBER OF DECKS: 2 NUMBER OF BELTS: 2 NUMBER OF REGENERATIVE ZONES: 5 NUMBER OF PASTEURIZATION ZONES: 5 NUMBER OF ADDITIONAL COOLING ZONES: 1 BELT WIDTH: 5.58 M EXTERNAL WIDTH (INCLUDING PUMPS AND OPS): 7.68 M TOTAL LENGTH (EX. PLATFORMS): 27.00 M PLATFORMS (FRONT / BACK): +1M / SIDE APPROX. PUMP SIDE FROM INFEED: LEFT TYPE OF INFEED CONVEYOR: REXNORD, 5 TRACK, PLASTIC, 425MM TYPE OF OUT FEED CONVEYOR: REXNORD, 5 TRACK, PLASTIC, 425MM HEATING MEDIA: SATURATED STEAM AT 3-9 BAR, CAPACITY 3370 KW WATER – DESIGN FLOW: 85.3 M3/H AIR CONSUMPTION: 5 M3/H CONVEYOR TYPE: INTRALOX RAISED RIP 400 CONVEYOR STATUS: PERFECT CONVEYOR MATERIAL: POLYPROPYLENE MAIN DRIVE: PLANETARY GEAR ELECTRICAL SUPPLY, PHASES: 3 VOLTAGE: 460 V AC TOLERANCES: +/- 10% FREQUENCY: 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-material width:    457 mm<br/>coil weight:    4.5 t<br/>material thickness:   15.8 mm<br/>--------------------------------------------------:  <br/>overall specifications (coil lines):  <br/>- feedstock transport direction: left to right:        <br/>decoiler:  <br/>- design: twin reel:        <br/>- sheet width max:    457 mm<br/>- max. weight of coil:    4.5 to<br/>- max. diameter of coil:   1828 mm<br/>- mandrel expansion range from ...:    508 mm<br/>- mandrel expansion range up to:    609 mm<br/>leveller unit:  <br/>- sheet width max:    457 mm<br/>- sheet thickness max:   15.8 mm<br/>- number of leveller rolls:     21  <br/>electrical specifications:  <br/>- mains voltage:    600 v<br/>- mains frequency:     60 hz<br/>coil reel:       perfecto rd107218<br/>restrictor:      perfecto cbdr18<br/>hold down arm:   perfecto phd18<br/>staightner:      perfecto s381821<br/>threading table: perfecto tts1828<br/><br/><br/><br/><br/> MATERIAL WIDTH: 457 MM
COIL WEIGHT: 4.5 T
MATERIAL THICKNESS: 15.8 MM
--------------------------------------------------:
OVERALL SPECIFICATIONS (COIL LINES):
- FEEDSTOCK TRANSPORT DIRECTION: LEFT TO RIGHT:
DECOILER:
- DESIGN: TWIN REEL:
- SHEET WIDTH MAX: 457 MM
- MAX. WEIGHT OF COIL: 4.5 TO
- MAX. DIAMETER OF COIL: 1828 MM
- MANDREL EXPANSION RANGE FROM ...: 508 MM
- MANDREL EXPANSION RANGE UP TO: 609 MM
LEVELLER UNIT:
- SHEET WIDTH MAX: 457 MM
- SHEET THICKNESS MAX: 15.8 MM
- NUMBER OF LEVELLER ROLLS: 21
ELECTRICAL SPECIFICATIONS:
- MAINS VOLTAGE: 600 V
- MAINS FREQUENCY: 60 HZ
COIL REEL: PERFECTO RD107218
RESTRICTOR: PERFECTO CBDR18
HOLD DOWN ARM: PERFECTO PHD18
STAIGHTNER: PERFECTO S381821
THREADING TABLE: PERFECTO TTS1828




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-* perfecta 115 tvc built: 2007
tvc version, monitor
air table, 2 x side tables
lift on the left side
spare blades, tool, etc.
very good condition!
available now!
 * PERFECTA 115 TVC BUILT: 2007 TVC VERSION, MONITOR AIR TABLE, 2 X SIDE TABLES LIFT ON THE LEFT SIDE SPARE BLADES, TOOL, ETC. VERY GOOD CONDITION! AVAILABLE NOW!
Vendedor: Bavarian graphics
Año de construcción: usado
Ubicación: Land-amtec vertiwrap weigher 4-cup dosing unit<br><br>volumetric dosing unit, 4 cups, perfect for free flowing granulate like products (rice, salt, sugar, etc.). <br><br>- specifications: stainless steel | dosing range: 80-2.000ml | max. speed of the machine in neutral: 60 cycles/minute.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP WEIGHER 4-CUP DOSING UNIT

VOLUMETRIC DOSING UNIT, 4 CUPS, PERFECT FOR FREE FLOWING GRANULATE LIKE PRODUCTS (RICE, SALT, SUGAR, ETC.).

- SPECIFICATIONS: STAINLESS STEEL | DOSING RANGE: 80-2.000ML | MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 17.000 €
Ubicación: Land-ref. 226
heidelberg  mozp-h
format 48x65, year 1991, alcohol dampening, baldwin, weko, perfecting 1-1, cp tronic, high pile delivery, price: 17 000 eur fca
 REF. 226 HEIDELBERG MOZP-H FORMAT 48X65, YEAR 1991, ALCOHOL DAMPENING, BALDWIN, WEKO, PERFECTING 1-1, CP TRONIC, HIGH PILE DELIVERY, PRICE: 17 000 EUR FCA
Vendedor: TM Machinery
Año de construcción: usado
Ubicación: Land-amtec shrink wrapper sideshrink w60-xxxl<br><br>high speed automatic side sealing machine for shrinkwrapping packaging. - ideal to be combined with amtec shrinktunnel-pof-xxxl (high speed ). suitable for fully automated inline production. automatic and manual infeed possible. color touchscreen operation, quick format change, servo motor control for accurate position and perfect seal line. <br><br>- specifications: max. speed of the machine in neutral: 60 cycles/minute | max. product dimensions: unlimited length, w+h max. 700mm, height max. 150mm | power: 220v, 3.4kw | compressed air: 6bar, 0.1m³/min | machine dimensions: l2350xw1760xh1320mm | weight: 1000kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINK WRAPPER SIDESHRINK W60-XXXL

HIGH SPEED AUTOMATIC SIDE SEALING MACHINE FOR SHRINKWRAPPING PACKAGING. - IDEAL TO BE COMBINED WITH AMTEC SHRINKTUNNEL-POF-XXXL (HIGH SPEED ). SUITABLE FOR FULLY AUTOMATED INLINE PRODUCTION. AUTOMATIC AND MANUAL INFEED POSSIBLE. COLOR TOUCHSCREEN OPERATION, QUICK FORMAT CHANGE, SERVO MOTOR CONTROL FOR ACCURATE POSITION AND PERFECT SEAL LINE.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | MAX. PRODUCT DIMENSIONS: UNLIMITED LENGTH, W+H MAX. 700MM, HEIGHT MAX. 150MM | POWER: 220V, 3.4KW | COMPRESSED AIR: 6BAR, 0.1M³/MIN | MACHINE DIMENSIONS: L2350XW1760XH1320MM | WEIGHT: 1000KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-we are pleased to offer: 

total number of impressions / hours:	38,037hrs 
max speed rating (sheets / hr)	5,000 
sheet size / print size (max / min)	1260 x 840mm max, 500 x 350mm min 
platen force generated – tonne	500 tonnes 
substrate types (paper / board / corrugate)	board 
substrate handling devices and type:	
non-stop feeder / delivery:	yes, but no nonstop swords available 
pile height (with / without non-stop) - feeder	
pile height (with / without non-stop) - delivery	
sheet slow-down device	yes 
anti-static system	yes 
honeycomb plates	3 honeycombs, 6 plates 
number of foil spindle sets in machine	3 
foil streams (max number)	6 
foil reel size (diameter min / max )	30mm / 215mm 
foil reel width (width min / max )	50mm min / 1260mm max 
foil waste removal system & type	hunkler baler 
control console	
honeycomb transporter 
3 honeycombs in total 
6 plates 
foil spindle devices 13 
lifting devices	crane 

estimated overall weight (tonne)	22 tons 
length (m)	9 
width (m)	6 
height (m)	2.8 
total power consumption (volt/phase/amps)	440/3/56 (75a switched supply) 
in production 
good condition 
inspection welcome 
full and complete WE ARE PLEASED TO OFFER: TOTAL NUMBER OF IMPRESSIONS / HOURS: 38,037HRS MAX SPEED RATING (SHEETS / HR) 5,000 SHEET SIZE / PRINT SIZE (MAX / MIN) 1260 X 840MM MAX, 500 X 350MM MIN PLATEN FORCE GENERATED – TONNE 500 TONNES SUBSTRATE TYPES (PAPER / BOARD / CORRUGATE) BOARD SUBSTRATE HANDLING DEVICES AND TYPE: NON-STOP FEEDER / DELIVERY: YES, BUT NO NONSTOP SWORDS AVAILABLE PILE HEIGHT (WITH / WITHOUT NON-STOP) - FEEDER PILE HEIGHT (WITH / WITHOUT NON-STOP) - DELIVERY SHEET SLOW-DOWN DEVICE YES ANTI-STATIC SYSTEM YES HONEYCOMB PLATES 3 HONEYCOMBS, 6 PLATES NUMBER OF FOIL SPINDLE SETS IN MACHINE 3 FOIL STREAMS (MAX NUMBER) 6 FOIL REEL SIZE (DIAMETER MIN / MAX ) 30MM / 215MM FOIL REEL WIDTH (WIDTH MIN / MAX ) 50MM MIN / 1260MM MAX FOIL WASTE REMOVAL SYSTEM & TYPE HUNKLER BALER CONTROL CONSOLE HONEYCOMB TRANSPORTER 3 HONEYCOMBS IN TOTAL 6 PLATES FOIL SPINDLE DEVICES 13 LIFTING DEVICES CRANE ESTIMATED OVERALL WEIGHT (TONNE) 22 TONS LENGTH (M) 9 WIDTH (M) 6 HEIGHT (M) 2.8 TOTAL POWER CONSUMPTION (VOLT/PHASE/AMPS) 440/3/56 (75A SWITCHED SUPPLY) IN PRODUCTION GOOD CONDITION INSPECTION WELCOME FULL AND COMPLETE
Vendedor: Jerry Curtin Limited
Año de construcción: usado
Ubicación: Land-amtec shrink wrapper sideshrink w60-xxl<br><br>high speed automatic side sealing machine for shrinkwrapping packaging. - ideal to be combined with amtec shrinktunnel-pof-xxl (high speed ). suitable for fully automated inline production. automatic and manual infeed possible. color touchscreen operation, quick format change, servo motor control for accurate position and perfect seal line. <br><br>- specifications: max. speed of the machine in neutral: 60 cycles/minute | max. product dimensions: unlimited length, w+h max. 600mm, height max. 150mm | power: 220v, 3.2kw | compressed air: 6bar, 0,1m³/min | machine dimensions: l2260xw1600xh1300mm | weight: 900kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINK WRAPPER SIDESHRINK W60-XXL

HIGH SPEED AUTOMATIC SIDE SEALING MACHINE FOR SHRINKWRAPPING PACKAGING. - IDEAL TO BE COMBINED WITH AMTEC SHRINKTUNNEL-POF-XXL (HIGH SPEED ). SUITABLE FOR FULLY AUTOMATED INLINE PRODUCTION. AUTOMATIC AND MANUAL INFEED POSSIBLE. COLOR TOUCHSCREEN OPERATION, QUICK FORMAT CHANGE, SERVO MOTOR CONTROL FOR ACCURATE POSITION AND PERFECT SEAL LINE.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | MAX. PRODUCT DIMENSIONS: UNLIMITED LENGTH, W+H MAX. 600MM, HEIGHT MAX. 150MM | POWER: 220V, 3.2KW | COMPRESSED AIR: 6BAR, 0,1M³/MIN | MACHINE DIMENSIONS: L2260XW1600XH1300MM | WEIGHT: 900KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 1.250 €
Ubicación: Land-smooth surface griddle used but works perfect and for reasonable price of the manufacturer: garland, model: ed 36g.
3 hot zones, individual adjustable, small splash guard.
ser. no.: 92j351.
dimensions: 920x620x350mm, size: 900x460mm.
elek. voltage: 220/380v, elek. power: 10.1kw.

the mismatch?
we resolve our camp and have very many, cheap deals for devices from the fields of gastro, restaurant and canteen kitchens, just make a request. SMOOTH SURFACE GRIDDLE USED BUT WORKS PERFECT AND FOR REASONABLE PRICE OF THE MANUFACTURER: GARLAND, MODEL: ED 36G. 3 HOT ZONES, INDIVIDUAL ADJUSTABLE, SMALL SPLASH GUARD. SER. NO.: 92J351. DIMENSIONS: 920X620X350MM, SIZE: 900X460MM. ELEK. VOLTAGE: 220/380V, ELEK. POWER: 10.1KW. THE MISMATCH? WE RESOLVE OUR CAMP AND HAVE VERY MANY, CHEAP DEALS FOR DEVICES FROM THE FIELDS OF GASTRO, RESTAURANT AND CANTEEN KITCHENS, JUST MAKE A REQUEST.
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Ubicación: Land-amtec shrink wrapper sideshrink w60-xl<br><br>high speed automatic side sealing machine for shrinkwrapping packaging. ideal to be combined with amtec shrinktunnel-pof-xl (high speed ). suitable for fully automated inline production. automatic and manual infeed possible. color touchscreen operation, quick format change, servo motor control for accurate position and perfect seal line. <br><br>- specifications: max. speed of the machine in neutral: 60 cycles/minute | max. product dimensions: unlimited length, w+h max. 400mm, height max. 150mm | power: 220v, 3.0kw | compressed air: 6bar, 0,1m³/min | machine dimensions: l2040xw1480xh1300mm | weight: 800kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINK WRAPPER SIDESHRINK W60-XL

HIGH SPEED AUTOMATIC SIDE SEALING MACHINE FOR SHRINKWRAPPING PACKAGING. IDEAL TO BE COMBINED WITH AMTEC SHRINKTUNNEL-POF-XL (HIGH SPEED ). SUITABLE FOR FULLY AUTOMATED INLINE PRODUCTION. AUTOMATIC AND MANUAL INFEED POSSIBLE. COLOR TOUCHSCREEN OPERATION, QUICK FORMAT CHANGE, SERVO MOTOR CONTROL FOR ACCURATE POSITION AND PERFECT SEAL LINE.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | MAX. PRODUCT DIMENSIONS: UNLIMITED LENGTH, W+H MAX. 400MM, HEIGHT MAX. 150MM | POWER: 220V, 3.0KW | COMPRESSED AIR: 6BAR, 0,1M³/MIN | MACHINE DIMENSIONS: L2040XW1480XH1300MM | WEIGHT: 800KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-balance marco

a marco awm is perfect for any type of pre-packaged goods, whether it's the manual packaging of fresh produce or fill automated high speed of cans, bottles or cartons.

for goods sold in europe, the 'e' weighed standard allows packaging from a middleweight. for example, in the case of a tray of grapes 500 g 490 g would be acceptable provided that the batch contains trays of 510 g to balance the average content.

the module awm, which includes a balance precision, is used outside the chain of conditioning. it gives a warning when the weight of a package is different from the preset tolerances. a unique feature of email alert brings another level of reliability, allowing operators to quickly take corrective and effective measures in accordance with the new european directive welmec (weights and measures).

qa compliance can be subjective, but the awm module eliminates any uncertainty. we take care of the weight and the volume control so that you don't have to worry. appropriate samples for the control size and frequency are determined by our unique software, guaranteeing the respect of the relevant laws in all circumstances. all data are stored electronically, in other words you can provide proof of compliance to your buyers by simply pressing a button. BALANCE MARCO A MARCO AWM IS PERFECT FOR ANY TYPE OF PRE-PACKAGED GOODS, WHETHER IT'S THE MANUAL PACKAGING OF FRESH PRODUCE OR FILL AUTOMATED HIGH SPEED OF CANS, BOTTLES OR CARTONS. FOR GOODS SOLD IN EUROPE, THE 'E' WEIGHED STANDARD ALLOWS PACKAGING FROM A MIDDLEWEIGHT. FOR EXAMPLE, IN THE CASE OF A TRAY OF GRAPES 500 G 490 G WOULD BE ACCEPTABLE PROVIDED THAT THE BATCH CONTAINS TRAYS OF 510 G TO BALANCE THE AVERAGE CONTENT. THE MODULE AWM, WHICH INCLUDES A BALANCE PRECISION, IS USED OUTSIDE THE CHAIN OF CONDITIONING. IT GIVES A WARNING WHEN THE WEIGHT OF A PACKAGE IS DIFFERENT FROM THE PRESET TOLERANCES. A UNIQUE FEATURE OF EMAIL ALERT BRINGS ANOTHER LEVEL OF RELIABILITY, ALLOWING OPERATORS TO QUICKLY TAKE CORRECTIVE AND EFFECTIVE MEASURES IN ACCORDANCE WITH THE NEW EUROPEAN DIRECTIVE WELMEC (WEIGHTS AND MEASURES). QA COMPLIANCE CAN BE SUBJECTIVE, BUT THE AWM MODULE ELIMINATES ANY UNCERTAINTY. WE TAKE CARE OF THE WEIGHT AND THE VOLUME CONTROL SO THAT YOU DON'T HAVE TO WORRY. APPROPRIATE SAMPLES FOR THE CONTROL SIZE AND FREQUENCY ARE DETERMINED BY OUR UNIQUE SOFTWARE, GUARANTEEING THE RESPECT OF THE RELEVANT LAWS IN ALL CIRCUMSTANCES. ALL DATA ARE STORED ELECTRONICALLY, IN OTHER WORDS YOU CAN PROVIDE PROOF OF COMPLIANCE TO YOUR BUYERS BY SIMPLY PRESSING A BUTTON.
Vendedor: Europ-Equipement
Año de construcción: usado
Ubicación: Land-amtec cup-fillingsystem aut. multilane cup/container filling/film sealing machine ml3-60<br><br>automatic multilane cup or container filling system including film sealing module. - suitable for different container sizes, shapes and materials (e.g. pp, ps, pet, paper, laminated films, etc.). perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. automatic operation from drop cup, filling to sealing. suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. touch screen for easy operation, stainless steel version, easy cleaning. print mark sensor. customizable mould for container allows a wide range of sizes/shapes. <br><br>- specifications: number of lanes: 2 | max. speed of the machine in neutral: 60 cycles/minute | power: 220v, 2.6kw | compressed air: 0,2m³, 6bar | machine dimensions: l3000xw950xh1600mm.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC CUP-FILLINGSYSTEM AUT. MULTILANE CUP/CONTAINER FILLING/FILM SEALING MACHINE ML3-60

AUTOMATIC MULTILANE CUP OR CONTAINER FILLING SYSTEM INCLUDING FILM SEALING MODULE. - SUITABLE FOR DIFFERENT CONTAINER SIZES, SHAPES AND MATERIALS (E.G. PP, PS, PET, PAPER, LAMINATED FILMS, ETC.). PERFECT TO PACK INSTANT FOOD, NOODLES, PASTA, DRIED FRUIT, SNACKS, CANDIES, CHOCOLATE, SOUP POWDER, FROZEN FOOD, YOGURT, ICE CREAM, JELLY, ETC.. AUTOMATIC OPERATION FROM DROP CUP, FILLING TO SEALING. SUITABLE FOR ALL KIND OF (SEPARATE) DOSING SYSTEMS FOR LIQUIDS, PASTES, GRANULES, POWDER, ETC.. TOUCH SCREEN FOR EASY OPERATION, STAINLESS STEEL VERSION, EASY CLEANING. PRINT MARK SENSOR. CUSTOMIZABLE MOULD FOR CONTAINER ALLOWS A WIDE RANGE OF SIZES/SHAPES.

- SPECIFICATIONS: NUMBER OF LANES: 2 | MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | POWER: 220V, 2.6KW | COMPRESSED AIR: 0,2M³, 6BAR | MACHINE DIMENSIONS: L3000XW950XH1600MM.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-comprising:

alko mobile 100
swarf extraction

for perfect binder

on request, we can organize for you the following points:

packing, loading, transport (by ship or airplane) including customs clearance COMPRISING: ALKO MOBILE 100 SWARF EXTRACTION FOR PERFECT BINDER ON REQUEST, WE CAN ORGANIZE FOR YOU THE FOLLOWING POINTS: PACKING, LOADING, TRANSPORT (BY SHIP OR AIRPLANE) INCLUDING CUSTOMS CLEARANCE
Vendedor: LA-POSTPRESS Landauer Alexander
Año de construcción: usado
Ubicación: Land-amtec cup-fillingsystem aut. multilane cup/container filling/film sealing machine ml2-40<br><br>automatic multilane cup or container filling system including film sealing module. - suitable for different container sizes, shapes and materials (e.g. pp, ps, pet, paper, laminated films, etc.). perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. automatic operation from drop cup, filling to sealing. suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. touch screen for easy operation, stainless steel version, easy cleaning. print mark sensor. customizable mould for container allows a wide range of sizes/shapes. <br><br>- specifications: number of lanes: 2 | max. speed of the machine in neutral: 40 cycles/minute | power: 220v, 2.1kw | compressed air: 0,2m³, 6bar | machine dimensions: l3000xw850xh1600mm.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC CUP-FILLINGSYSTEM AUT. MULTILANE CUP/CONTAINER FILLING/FILM SEALING MACHINE ML2-40

AUTOMATIC MULTILANE CUP OR CONTAINER FILLING SYSTEM INCLUDING FILM SEALING MODULE. - SUITABLE FOR DIFFERENT CONTAINER SIZES, SHAPES AND MATERIALS (E.G. PP, PS, PET, PAPER, LAMINATED FILMS, ETC.). PERFECT TO PACK INSTANT FOOD, NOODLES, PASTA, DRIED FRUIT, SNACKS, CANDIES, CHOCOLATE, SOUP POWDER, FROZEN FOOD, YOGURT, ICE CREAM, JELLY, ETC.. AUTOMATIC OPERATION FROM DROP CUP, FILLING TO SEALING. SUITABLE FOR ALL KIND OF (SEPARATE) DOSING SYSTEMS FOR LIQUIDS, PASTES, GRANULES, POWDER, ETC.. TOUCH SCREEN FOR EASY OPERATION, STAINLESS STEEL VERSION, EASY CLEANING. PRINT MARK SENSOR. CUSTOMIZABLE MOULD FOR CONTAINER ALLOWS A WIDE RANGE OF SIZES/SHAPES.

- SPECIFICATIONS: NUMBER OF LANES: 2 | MAX. SPEED OF THE MACHINE IN NEUTRAL: 40 CYCLES/MINUTE | POWER: 220V, 2.1KW | COMPRESSED AIR: 0,2M³, 6BAR | MACHINE DIMENSIONS: L3000XW850XH1600MM.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-size max: 300 x 420 mm
min. size: 70 x 80 mm
speed: 30 cycles/min
belt delivery SIZE MAX: 300 X 420 MM MIN. SIZE: 70 X 80 MM SPEED: 30 CYCLES/MIN BELT DELIVERY
Vendedor: YUKE
Año de construcción: usado
Ubicación: Land-amtec cup-fillingsystem aut. rotary cup/container filling/film sealing machine rt12-20<br><br>automatic rotary cup or container filling system including film sealing module. - suitable for different container sizes, shapes and materials (e.g. pp, ps, pet, paper, laminated films, etc.). perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. automatic operation from drop cup, filling to sealing. suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. touch screen for easy operation, stainless steel version, easy cleaning. print mark sensor. customizable mould for container allows a wide range of sizes/shapes. <br><br>- specifications: number of working stations: 12 | max. speed of the machine in neutral: 20 cycles/minute | power: 220v, 2.1kw | compressed air: 0,1m³, 6bar | machine dimensions: l900xw850xh1600mm.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC CUP-FILLINGSYSTEM AUT. ROTARY CUP/CONTAINER FILLING/FILM SEALING MACHINE RT12-20

AUTOMATIC ROTARY CUP OR CONTAINER FILLING SYSTEM INCLUDING FILM SEALING MODULE. - SUITABLE FOR DIFFERENT CONTAINER SIZES, SHAPES AND MATERIALS (E.G. PP, PS, PET, PAPER, LAMINATED FILMS, ETC.). PERFECT TO PACK INSTANT FOOD, NOODLES, PASTA, DRIED FRUIT, SNACKS, CANDIES, CHOCOLATE, SOUP POWDER, FROZEN FOOD, YOGURT, ICE CREAM, JELLY, ETC.. AUTOMATIC OPERATION FROM DROP CUP, FILLING TO SEALING. SUITABLE FOR ALL KIND OF (SEPARATE) DOSING SYSTEMS FOR LIQUIDS, PASTES, GRANULES, POWDER, ETC.. TOUCH SCREEN FOR EASY OPERATION, STAINLESS STEEL VERSION, EASY CLEANING. PRINT MARK SENSOR. CUSTOMIZABLE MOULD FOR CONTAINER ALLOWS A WIDE RANGE OF SIZES/SHAPES.

- SPECIFICATIONS: NUMBER OF WORKING STATIONS: 12 | MAX. SPEED OF THE MACHINE IN NEUTRAL: 20 CYCLES/MINUTE | POWER: 220V, 2.1KW | COMPRESSED AIR: 0,1M³, 6BAR | MACHINE DIMENSIONS: L900XW850XH1600MM.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-size 52 x 72 cms 
perfecting 1/1,2/0 
year 1983 
alcohol dampening with meg cooling device 
sheet decurler 
bacher register clamps 
blanket wash up device 
chromed impression cylinders 
anti static 
weko powder spray 
superblue at delivery 
electronical pull lay control 
free of damage or repairs on cylinders 
very well maintain, immaculate conditions. 
in production.  SIZE 52 X 72 CMS PERFECTING 1/1,2/0 YEAR 1983 ALCOHOL DAMPENING WITH MEG COOLING DEVICE SHEET DECURLER BACHER REGISTER CLAMPS BLANKET WASH UP DEVICE CHROMED IMPRESSION CYLINDERS ANTI STATIC WEKO POWDER SPRAY SUPERBLUE AT DELIVERY ELECTRONICAL PULL LAY CONTROL FREE OF DAMAGE OR REPAIRS ON CYLINDERS VERY WELL MAINTAIN, IMMACULATE CONDITIONS. IN PRODUCTION.
Vendedor: ICD
Año de construcción: usado
Ubicación: Land-amtec cup-fillingsystem aut. rotary cup/container filling/film sealing machine rt8-20<br><br>automatic rotary cup or container filling system including film sealing module. - suitable for different container sizes, shapes and materials (e.g. pp, ps, pet, paper, laminated films, etc.). perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. automatic operation from drop cup, filling to sealing. suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. touch screen for easy operation, stainless steel version, easy cleaning. print mark sensor. customizable mould for container allows a wide range of sizes/shapes. <br><br>- specifications: number of working stations: 8 | max. speed of the machine in neutral: 20 cycles/minute | power: 220v, 1.5kw | compressed air: 0,1m³, 6bar | machine dimensions: l950xw870xh1600mm.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC CUP-FILLINGSYSTEM AUT. ROTARY CUP/CONTAINER FILLING/FILM SEALING MACHINE RT8-20

AUTOMATIC ROTARY CUP OR CONTAINER FILLING SYSTEM INCLUDING FILM SEALING MODULE. - SUITABLE FOR DIFFERENT CONTAINER SIZES, SHAPES AND MATERIALS (E.G. PP, PS, PET, PAPER, LAMINATED FILMS, ETC.). PERFECT TO PACK INSTANT FOOD, NOODLES, PASTA, DRIED FRUIT, SNACKS, CANDIES, CHOCOLATE, SOUP POWDER, FROZEN FOOD, YOGURT, ICE CREAM, JELLY, ETC.. AUTOMATIC OPERATION FROM DROP CUP, FILLING TO SEALING. SUITABLE FOR ALL KIND OF (SEPARATE) DOSING SYSTEMS FOR LIQUIDS, PASTES, GRANULES, POWDER, ETC.. TOUCH SCREEN FOR EASY OPERATION, STAINLESS STEEL VERSION, EASY CLEANING. PRINT MARK SENSOR. CUSTOMIZABLE MOULD FOR CONTAINER ALLOWS A WIDE RANGE OF SIZES/SHAPES.

- SPECIFICATIONS: NUMBER OF WORKING STATIONS: 8 | MAX. SPEED OF THE MACHINE IN NEUTRAL: 20 CYCLES/MINUTE | POWER: 220V, 1.5KW | COMPRESSED AIR: 0,1M³, 6BAR | MACHINE DIMENSIONS: L950XW870XH1600MM.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-counter: 1, 2
4 clamp perfect binder bq-470
touch & work technology
200 memories for repeat orders
side gluing: melt
perforating unit: 4 times scoring
ex hau ster: extracteur unit
min size: 145x150x1mm
max: 320x320x65mm
cover size: min_225x135mm
bdfecf08ft
cover size: max: 660x320mm
paper strength: min. 80 g / sqm
paper strength: maximum 300 g / sqm
milling section max 3mm COUNTER: 1, 2 4 CLAMP PERFECT BINDER BQ-470 TOUCH & WORK TECHNOLOGY 200 MEMORIES FOR REPEAT ORDERS SIDE GLUING: MELT PERFORATING UNIT: 4 TIMES SCORING EX HAU STER: EXTRACTEUR UNIT MIN SIZE: 145X150X1MM MAX: 320X320X65MM COVER SIZE: MIN_225X135MM BDFECF08FT COVER SIZE: MAX: 660X320MM PAPER STRENGTH: MIN. 80 G / SQM PAPER STRENGTH: MAXIMUM 300 G / SQM MILLING SECTION MAX 3MM
Vendedor: YUKE
Año de construcción: usado
Precio: used machinery auction RESALE 6.500 €
Ubicación: Land-weight approx.: 4500 kg<br/>dimensions (l x w x h) approx.: 4200 x 2200 x 2400 mm<br/>description: serial number 509230807, grinding length 1000 mm, grinding width 400 mm, grinding height 555 mm, table load max. 700 kg, table clamping surface 1360 x 370 mm, longitudinal table stroke max. 1100 mm, table feed 2 to 30 m/min, vertical feed max. 1200 mm/min, automatic cross path max. 360 mm, including magnetic plate 800 x 400 mm, grinding spindle speed 1000 to 3500 rpm, grinding spindle cone 36 mm, grinding disc size 300 x 50 x 76.2 mm, grinding disc protection hood grinding disc diameter max. 300 mm, grinding disc width max. 50 mm, stc control with touch panel siemens, the grinding machine has a wet grinding unit, tank contents 360 l, pump capacity 50 l/min, eg declaratio of conformity available, including 1 open workshop cabinet with various grinding discs and accessories for the machine WEIGHT APPROX.: 4500 KG
DIMENSIONS (L X W X H) APPROX.: 4200 X 2200 X 2400 MM
DESCRIPTION: SERIAL NUMBER 509230807, GRINDING LENGTH 1000 MM, GRINDING WIDTH 400 MM, GRINDING HEIGHT 555 MM, TABLE LOAD MAX. 700 KG, TABLE CLAMPING SURFACE 1360 X 370 MM, LONGITUDINAL TABLE STROKE MAX. 1100 MM, TABLE FEED 2 TO 30 M/MIN, VERTICAL FEED MAX. 1200 MM/MIN, AUTOMATIC CROSS PATH MAX. 360 MM, INCLUDING MAGNETIC PLATE 800 X 400 MM, GRINDING SPINDLE SPEED 1000 TO 3500 RPM, GRINDING SPINDLE CONE 36 MM, GRINDING DISC SIZE 300 X 50 X 76.2 MM, GRINDING DISC PROTECTION HOOD GRINDING DISC DIAMETER MAX. 300 MM, GRINDING DISC WIDTH MAX. 50 MM, STC CONTROL WITH TOUCH PANEL SIEMENS, THE GRINDING MACHINE HAS A WET GRINDING UNIT, TANK CONTENTS 360 L, PUMP CAPACITY 50 L/MIN, EG DECLARATIO OF CONFORMITY AVAILABLE, INCLUDING 1 OPEN WORKSHOP CABINET WITH VARIOUS GRINDING DISCS AND ACCESSORIES FOR THE MACHINE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-web offset
4 colours offset 
the machines prints products leaftets on 40-50 gr-material.
4 x 17' inserts
4 x 24' inserts 
ex site printingshop, germany   WEB OFFSET 4 COLOURS OFFSET THE MACHINES PRINTS PRODUCTS LEAFTETS ON 40-50 GR-MATERIAL. 4 X 17' INSERTS 4 X 24' INSERTS EX SITE PRINTINGSHOP, GERMANY
Vendedor: TMP Meurer Industry & Consult GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 3.500 €
Ubicación: Land-weight approx.: 3300 kg<br/>dimensions (l x w x h) approx.: 3500 x 2500 x 2400 mm<br/>description: machine number 450370894, travels x-axis 600 mm, z-axis 375 mm, y-axis 375 mm, table load approx. 600 kg, including magnetic plate 600 x 300 mm, grinding spindle drive power 3.7/4.7 kw, grinding spindle cone 36 mm, grinding spindle speed 1440/2900 rpm, grinding disc dimensions 300 x 50 x 76.2 mm, grinding disc diameter max. 300 mm, grinding disc width max. 50 mm, including 1 tool cabinet with contents: e.g. various accessories for machine, grinding discs, 1 x cafro b 107 w 75 un 16, various other stone grinding discs, cabinet dimensions 800 x 600 x 1200 mm, weight 150 kg WEIGHT APPROX.: 3300 KG
DIMENSIONS (L X W X H) APPROX.: 3500 X 2500 X 2400 MM
DESCRIPTION: MACHINE NUMBER 450370894, TRAVELS X-AXIS 600 MM, Z-AXIS 375 MM, Y-AXIS 375 MM, TABLE LOAD APPROX. 600 KG, INCLUDING MAGNETIC PLATE 600 X 300 MM, GRINDING SPINDLE DRIVE POWER 3.7/4.7 KW, GRINDING SPINDLE CONE 36 MM, GRINDING SPINDLE SPEED 1440/2900 RPM, GRINDING DISC DIMENSIONS 300 X 50 X 76.2 MM, GRINDING DISC DIAMETER MAX. 300 MM, GRINDING DISC WIDTH MAX. 50 MM, INCLUDING 1 TOOL CABINET WITH CONTENTS: E.G. VARIOUS ACCESSORIES FOR MACHINE, GRINDING DISCS, 1 X CAFRO B 107 W 75 UN 16, VARIOUS OTHER STONE GRINDING DISCS, CABINET DIMENSIONS 800 X 600 X 1200 MM, WEIGHT 150 KG
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-gcm10/3+1-08-30-27+9-nw-cr
gc: gyrocompact (stackable carpet without structure)
m10: carpet 1 meter wide
3 + 1: 3 evaporators running, defrosting 1 (allows to work 24/24 non-stop)
08: height of 80 mm (height available 65 mm) bank
30: number of turns 30
27 + 9: 27000 m² of surface area + 9000 m² of reserve
nw: north west location (when you are in front of the freezer input down to the left, output on the right side at the top.)
cr: rotation in the clockwise direction.

technical details

carpet:
-height of 80 mm bank
-available height 65 mm
-number of turns 30
-type of tape frigobelt w
-total width 1070 mm
-1040 mm useful width
-length by whorl 20.5 m
-surface by whorl 17.5 m²
-speed of 3.5a 30 m/min

electricity:
-3 x 380 v, 50 hz
-total power output 81 kw
-maximum peak 123.5 kva

data of refrigeration
-4 evaporators
-by evaporator 92 kw
-79100 kcal/h by evaporator

data of deicing
-defrost water
-consumption by defrosting cycle 360 l/min
-mini water 15 ° c temperature

operating noise
-maximum 80 dba dimensions
-length 14000 mm
-width 8000 mm
-height 4800 mm

year of commissioning
-2009

the co²-powered freezer
all stainless steel
 plc siemens s7 control.
 electric control stainless steel cabinet, stainless steel power (for the fan) cabinet, wardrobe of liquid circulation of heating to the ground (stainless steel)
 cip cleaning station
 automatic lubrication station
 circulation for the floor pump

equipment in perfect working order regularly maintained by jbt (maintenance agreement) GCM10/3+1-08-30-27+9-NW-CR GC: GYROCOMPACT (STACKABLE CARPET WITHOUT STRUCTURE) M10: CARPET 1 METER WIDE 3 + 1: 3 EVAPORATORS RUNNING, DEFROSTING 1 (ALLOWS TO WORK 24/24 NON-STOP) 08: HEIGHT OF 80 MM (HEIGHT AVAILABLE 65 MM) BANK 30: NUMBER OF TURNS 30 27 + 9: 27000 M² OF SURFACE AREA + 9000 M² OF RESERVE NW: NORTH WEST LOCATION (WHEN YOU ARE IN FRONT OF THE FREEZER INPUT DOWN TO THE LEFT, OUTPUT ON THE RIGHT SIDE AT THE TOP.) CR: ROTATION IN THE CLOCKWISE DIRECTION. TECHNICAL DETAILS CARPET: -HEIGHT OF 80 MM BANK -AVAILABLE HEIGHT 65 MM -NUMBER OF TURNS 30 -TYPE OF TAPE FRIGOBELT W -TOTAL WIDTH 1070 MM -1040 MM USEFUL WIDTH -LENGTH BY WHORL 20.5 M -SURFACE BY WHORL 17.5 M² -SPEED OF 3.5A 30 M/MIN ELECTRICITY: -3 X 380 V, 50 HZ -TOTAL POWER OUTPUT 81 KW -MAXIMUM PEAK 123.5 KVA DATA OF REFRIGERATION -4 EVAPORATORS -BY EVAPORATOR 92 KW -79100 KCAL/H BY EVAPORATOR DATA OF DEICING -DEFROST WATER -CONSUMPTION BY DEFROSTING CYCLE 360 L/MIN -MINI WATER 15 ° C TEMPERATURE OPERATING NOISE -MAXIMUM 80 DBA DIMENSIONS -LENGTH 14000 MM -WIDTH 8000 MM -HEIGHT 4800 MM YEAR OF COMMISSIONING -2009 THE CO²-POWERED FREEZER ALL STAINLESS STEEL PLC SIEMENS S7 CONTROL. ELECTRIC CONTROL STAINLESS STEEL CABINET, STAINLESS STEEL POWER (FOR THE FAN) CABINET, WARDROBE OF LIQUID CIRCULATION OF HEATING TO THE GROUND (STAINLESS STEEL) CIP CLEANING STATION AUTOMATIC LUBRICATION STATION CIRCULATION FOR THE FLOOR PUMP EQUIPMENT IN PERFECT WORKING ORDER REGULARLY MAINTAINED BY JBT (MAINTENANCE AGREEMENT)
Vendedor: Europ-Equipement
Año de construcción: usado
Precio: 24.438 EU€
Ubicación: Land-the machine is a combination of offset with digital printing. the entire process runs automatically - from setting up the plates to exposure, printing and cleaning - in one system. thermal exposure of the plates takes place directly on the machine cylinders, it does not require chemical processing with a perfect fit. the machine works in anhydrous printing technology. THE MACHINE IS A COMBINATION OF OFFSET WITH DIGITAL PRINTING. THE ENTIRE PROCESS RUNS AUTOMATICALLY - FROM SETTING UP THE PLATES TO EXPOSURE, PRINTING AND CLEANING - IN ONE SYSTEM. THERMAL EXPOSURE OF THE PLATES TAKES PLACE DIRECTLY ON THE MACHINE CYLINDERS, IT DOES NOT REQUIRE CHEMICAL PROCESSING WITH A PERFECT FIT. THE MACHINE WORKS IN ANHYDROUS PRINTING TECHNOLOGY.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-counter: 156 mln
details:
cpc 1.04
alcolor
autoplate
all automatic washing devices
perfecting 4/0; 2/2
bd9nbv0x2p
ir dryer
powdering grafix
high pile
new rollers since 2015 COUNTER: 156 MLN DETAILS: CPC 1.04 ALCOLOR AUTOPLATE ALL AUTOMATIC WASHING DEVICES PERFECTING 4/0; 2/2 BD9NBV0X2P IR DRYER POWDERING GRAFIX HIGH PILE NEW ROLLERS SINCE 2015
Vendedor: YUKE
Año de construcción: usado
Ubicación: Land-x-travel:900 mm<br/>y-travel:650 mm<br/>z-travel:450 mm<br/>table surface area:1235x460 mm<br/>t-slot (width-distance-quantity):18x80x5 mm<br/>max. table load:800 kg<br/>turning speed range:(27) 30 - 1800 u/min<br/>spindle nose:50 iso<br/>feed stepless:x/y/z:0-1000 / 0-1000 / 0-500 mm/min<br/>rapid traverse:x/y/z: 2200 / 2200 / 1100 mm/min<br/>power capacity:5,5 kw<br/>weight of the machine ca.:3600 kg<br/>machine size (lxwxh):1940x2200x2115 mm<br/>3-axis dro: <br/>universal milling head, manual: <br/>working lamp: <br/>ce and declaration of conformity: <br/>complete cooling unit: <br/>machine tools: <br/>screws cover: <br/>stepless feed:in allen achsen <br/>: <br/>european electric: <br/>: <br/>: <br/>metric, 400v 50hz 3 phase: <br/><br/>key features mounted inclusive price with 3-axis position indicator stable and rigid construction universal swivel head - cutters (huron) can be placed in any spatial angle large working range of up to 460x1235mm (optional 1635x500 mm 2000x500 mm) and up to 800/1.800 kg table load. turcite-b coating for smooth running of the axes vertical universal head can rotate 360 ??° for versatile cutting performance. x axis 900, 1300, 1500 mm vertical and horizontal spindle each with its own strong drive milling table pivotable in the x-axis array of standard accessories machine frame heavily ribbed and rigid wide, stable and hardened guides guarantee stability and lasting accuracy large, broadly supported table of ± 45 ° in the electrical equipment proven components from reputable manufacturers are used automatic feeds and rapid feeds in all 3 axes all hand wheels (for the x-axis) are placed on the front and accessible to the operator control panel can be positioned perfectly on pivoting boom the central lubrication ensures maintenance-free operation precision ground guideways with hardened surface for long-term stability and wear resistance. wide speed range (30-2050 / 27 steps)  standard accessories 3-axis position indicator universal milling automatic central lubrication sk 50 cutter tool shank Ø 32mm halogen lamp coolant system m24 tie rod, 2 pieces operating tool european electrical schneider or siemens aufsteckfräsdorn iso 50/27 mm aufsteckfräsdorn iso 50/40 mm operating instructions in german language ce version X-TRAVEL:900 MM
Y-TRAVEL:650 MM
Z-TRAVEL:450 MM
TABLE SURFACE AREA:1235X460 MM
T-SLOT (WIDTH-DISTANCE-QUANTITY):18X80X5 MM
MAX. TABLE LOAD:800 KG
TURNING SPEED RANGE:(27) 30 - 1800 U/MIN
SPINDLE NOSE:50 ISO
FEED STEPLESS:X/Y/Z:0-1000 / 0-1000 / 0-500 MM/MIN
RAPID TRAVERSE:X/Y/Z: 2200 / 2200 / 1100 MM/MIN
POWER CAPACITY:5,5 KW
WEIGHT OF THE MACHINE CA.:3600 KG
MACHINE SIZE (LXWXH):1940X2200X2115 MM
3-AXIS DRO:
UNIVERSAL MILLING HEAD, MANUAL:
WORKING LAMP:
CE AND DECLARATION OF CONFORMITY:
COMPLETE COOLING UNIT:
MACHINE TOOLS:
SCREWS COVER:
STEPLESS FEED:IN ALLEN ACHSEN
:
EUROPEAN ELECTRIC:
:
:
METRIC, 400V 50HZ 3 PHASE:

KEY FEATURES MOUNTED INCLUSIVE PRICE WITH 3-AXIS POSITION INDICATOR STABLE AND RIGID CONSTRUCTION UNIVERSAL SWIVEL HEAD - CUTTERS (HURON) CAN BE PLACED IN ANY SPATIAL ANGLE LARGE WORKING RANGE OF UP TO 460X1235MM (OPTIONAL 1635X500 MM 2000X500 MM) AND UP TO 800/1.800 KG TABLE LOAD. TURCITE-B COATING FOR SMOOTH RUNNING OF THE AXES VERTICAL UNIVERSAL HEAD CAN ROTATE 360 ??° FOR VERSATILE CUTTING PERFORMANCE. X AXIS 900, 1300, 1500 MM VERTICAL AND HORIZONTAL SPINDLE EACH WITH ITS OWN STRONG DRIVE MILLING TABLE PIVOTABLE IN THE X-AXIS ARRAY OF STANDARD ACCESSORIES MACHINE FRAME HEAVILY RIBBED AND RIGID WIDE, STABLE AND HARDENED GUIDES GUARANTEE STABILITY AND LASTING ACCURACY LARGE, BROADLY SUPPORTED TABLE OF ± 45 ° IN THE ELECTRICAL EQUIPMENT PROVEN COMPONENTS FROM REPUTABLE MANUFACTURERS ARE USED AUTOMATIC FEEDS AND RAPID FEEDS IN ALL 3 AXES ALL HAND WHEELS (FOR THE X-AXIS) ARE PLACED ON THE FRONT AND ACCESSIBLE TO THE OPERATOR CONTROL PANEL CAN BE POSITIONED PERFECTLY ON PIVOTING BOOM THE CENTRAL LUBRICATION ENSURES MAINTENANCE-FREE OPERATION PRECISION GROUND GUIDEWAYS WITH HARDENED SURFACE FOR LONG-TERM STABILITY AND WEAR RESISTANCE. WIDE SPEED RANGE (30-2050 / 27 STEPS) STANDARD ACCESSORIES 3-AXIS POSITION INDICATOR UNIVERSAL MILLING AUTOMATIC CENTRAL LUBRICATION SK 50 CUTTER TOOL SHANK Ø 32MM HALOGEN LAMP COOLANT SYSTEM M24 TIE ROD, 2 PIECES OPERATING TOOL EUROPEAN ELECTRICAL SCHNEIDER OR SIEMENS AUFSTECKFRäSDORN ISO 50/27 MM AUFSTECKFRäSDORN ISO 50/40 MM OPERATING INSTRUCTIONS IN GERMAN LANGUAGE CE VERSION
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-waterless
unwinder
year: 2002
offset units: 5
flexo: 1
finishing: 2 x hot stamping
finishing: cutting
rewinder
6 x uv lamps: uv ray
condition: perfect WATERLESS UNWINDER YEAR: 2002 OFFSET UNITS: 5 FLEXO: 1 FINISHING: 2 X HOT STAMPING FINISHING: CUTTING REWINDER 6 X UV LAMPS: UV RAY CONDITION: PERFECT
Vendedor: YUKE
Año de construcción: usado
Ubicación: Land-grinding length:650 mm<br/>grinding width:375 mm<br/>grinding height:375 mm<br/>clamping area:900x300 mm<br/>grinding spindle drive:3,7/4,5 kw<br/>table speeds:2-28 m/min<br/>autom. cross feed adjustable:1-60 mm/hub<br/>vertical feed autom.:0,002-0,06 mm<br/>vertical rapid traverse:0,15 m/min<br/>grinding wheel diameter:300 mm<br/>grinding wheel hole diameter:76,2 mm<br/>grinding wheel width:50 mm<br/>hydraulic pump:1,5 kw<br/>cross feed motor:0,3 kw<br/>vertical feed motor:1,7 kw<br/>weight of the machine ca.:2800 kg<br/>dimension (lxwxh) ca.:2800x1900x2400 mm<br/><br/> used / overhauled surface grinding machine, make elb, type hk orion 635 nc-k, machine no. 18.289.0482.  automatic notification in all 3 axes.  equipped with nc-k controller, controlled downfeed (y-axis) with compensation of the grinding wheel truing (see accompanying description).  active digital display for the cross feed.  overhaul scope:  machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality. all führunsbahnen new eingeschabt on neumaschinengeometrie. wear parts replaced defective components reparariert or replaced. reassembly, compl. functional testing and internal loss. machine repainted. machine in perfect, produktionsbereitem state.  accessories: - two-axis active digital display with automatic. shutdown of the vertical and transverse axis - electric - magnetic - particle board, size 600x350mm, with straight, fine pole pitch - motor abrichtapparat, mounted on the grinding wheel, type swn 602 19 53 with automatic. dressing compensation of schleifscheibenabrichtbetrages - complete coolant system with paper band filter - setting up / alignment - separate electrical cabinet - technical documentation in german  for more information, refer to the appendix.  payment: 100% before loading the machine warranty: no  figure shows the current status of the machine without repainting. GRINDING LENGTH:650 MM
GRINDING WIDTH:375 MM
GRINDING HEIGHT:375 MM
CLAMPING AREA:900X300 MM
GRINDING SPINDLE DRIVE:3,7/4,5 KW
TABLE SPEEDS:2-28 M/MIN
AUTOM. CROSS FEED ADJUSTABLE:1-60 MM/HUB
VERTICAL FEED AUTOM.:0,002-0,06 MM
VERTICAL RAPID TRAVERSE:0,15 M/MIN
GRINDING WHEEL DIAMETER:300 MM
GRINDING WHEEL HOLE DIAMETER:76,2 MM
GRINDING WHEEL WIDTH:50 MM
HYDRAULIC PUMP:1,5 KW
CROSS FEED MOTOR:0,3 KW
VERTICAL FEED MOTOR:1,7 KW
WEIGHT OF THE MACHINE CA.:2800 KG
DIMENSION (LXWXH) CA.:2800X1900X2400 MM

USED / OVERHAULED SURFACE GRINDING MACHINE, MAKE ELB, TYPE HK ORION 635 NC-K, MACHINE NO. 18.289.0482. AUTOMATIC NOTIFICATION IN ALL 3 AXES. EQUIPPED WITH NC-K CONTROLLER, CONTROLLED DOWNFEED (Y-AXIS) WITH COMPENSATION OF THE GRINDING WHEEL TRUING (SEE ACCOMPANYING DESCRIPTION). ACTIVE DIGITAL DISPLAY FOR THE CROSS FEED. OVERHAUL SCOPE: MACHINE COMPLETELY DISMANTLED, CLEANED ALL THE COMPONENTS THOROUGHLY AND CHECKED FOR COMPLETE FUNCTIONALITY. ALL FüHRUNSBAHNEN NEW EINGESCHABT ON NEUMASCHINENGEOMETRIE. WEAR PARTS REPLACED DEFECTIVE COMPONENTS REPARARIERT OR REPLACED. REASSEMBLY, COMPL. FUNCTIONAL TESTING AND INTERNAL LOSS. MACHINE REPAINTED. MACHINE IN PERFECT, PRODUKTIONSBEREITEM STATE. ACCESSORIES: - TWO-AXIS ACTIVE DIGITAL DISPLAY WITH AUTOMATIC. SHUTDOWN OF THE VERTICAL AND TRANSVERSE AXIS - ELECTRIC - MAGNETIC - PARTICLE BOARD, SIZE 600X350MM, WITH STRAIGHT, FINE POLE PITCH - MOTOR ABRICHTAPPARAT, MOUNTED ON THE GRINDING WHEEL, TYPE SWN 602 19 53 WITH AUTOMATIC. DRESSING COMPENSATION OF SCHLEIFSCHEIBENABRICHTBETRAGES - COMPLETE COOLANT SYSTEM WITH PAPER BAND FILTER - SETTING UP / ALIGNMENT - SEPARATE ELECTRICAL CABINET - TECHNICAL DOCUMENTATION IN GERMAN FOR MORE INFORMATION, REFER TO THE APPENDIX. PAYMENT: 100% BEFORE LOADING THE MACHINE WARRANTY: NO FIGURE SHOWS THE CURRENT STATUS OF THE MACHINE WITHOUT REPAINTING.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 1.850 €
Ubicación: Land-the cy270n is the perfect universal band saw for every metal worker, artisan, or other professionals.

-the machine is suitable for the cutting of steel, stainless steel and aluminium profiles.
-blade - page guide each 6-set of ball bearings
blade back guide set of ball bearings
-manometer for belt tension
-ergonomic handle
electrical kã¼hlmittellpumpe
-hydrauliches lowering the saw frame (adjustable)
-automatic shut-off
-2 reversible saw speeds
-with sturdy pedestal

data
connection voltage 400 v
motor power 1100 w
coolant pump 100 w
weight approx. 190 kg
machine dimensions lxdxh 1430 x 720 x 1700 mm
cutting speeds 45 + 90 m / min
band saw blade dimensions 2480 x 27 x 0,9 mm
working height 910 mm
cutting capacity round 90 â° and 225 mm
cutting capacity 90 â° 200 x 200 mm square
section flat 90 â° 245 x 150 mm
cutting area around 45â° 160 mm
section square 45 â° 160 x 160 mm
cutting area around 60 â° 100 mm
cutting range, square 60 â° 100 x 100 mm

scope of delivery:
bi metal saw strip
workpiece stop THE CY270N IS THE PERFECT UNIVERSAL BAND SAW FOR EVERY METAL WORKER, ARTISAN, OR OTHER PROFESSIONALS. -THE MACHINE IS SUITABLE FOR THE CUTTING OF STEEL, STAINLESS STEEL AND ALUMINIUM PROFILES. -BLADE - PAGE GUIDE EACH 6-SET OF BALL BEARINGS BLADE BACK GUIDE SET OF BALL BEARINGS -MANOMETER FOR BELT TENSION -ERGONOMIC HANDLE ELECTRICAL K&ATILDE;&FRAC14;HLMITTELLPUMPE -HYDRAULICHES LOWERING THE SAW FRAME (ADJUSTABLE) -AUTOMATIC SHUT-OFF -2 REVERSIBLE SAW SPEEDS -WITH STURDY PEDESTAL DATA CONNECTION VOLTAGE 400 V MOTOR POWER 1100 W COOLANT PUMP 100 W WEIGHT APPROX. 190 KG MACHINE DIMENSIONS LXDXH 1430 X 720 X 1700 MM CUTTING SPEEDS 45 + 90 M / MIN BAND SAW BLADE DIMENSIONS 2480 X 27 X 0,9 MM WORKING HEIGHT 910 MM CUTTING CAPACITY ROUND 90 &ACIRC;&DEG; AND 225 MM CUTTING CAPACITY 90 &ACIRC;&DEG; 200 X 200 MM SQUARE SECTION FLAT 90 &ACIRC;&DEG; 245 X 150 MM CUTTING AREA AROUND 45&ACIRC;&DEG; 160 MM SECTION SQUARE 45 &ACIRC;&DEG; 160 X 160 MM CUTTING AREA AROUND 60 &ACIRC;&DEG; 100 MM CUTTING RANGE, SQUARE 60 &ACIRC;&DEG; 100 X 100 MM SCOPE OF DELIVERY: BI METAL SAW STRIP WORKPIECE STOP
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Ubicación: Land-grinding length:7000 mm<br/>grinding width:1450 mm<br/>workpiece height:1000 mm<br/>distance between columns:1510 mm<br/>clamping area:7.270 x 1.250 mm<br/>table load:35 t<br/>table speeds:1-50 m/min<br/>grinding wheel dia. x width:horizontaler stößel: 630x180 mm<br/>spindle drive:horizontaler stößel: 22 kw<br/>vertical movement:250 mm<br/>grinding wheel dia. x width:universal stößel: 500x50 mm<br/>spindle drive:universal stößel: 7 kw<br/>vertical movement:450 mm<br/>spindle motor:7,5 kw<br/>pivoting angle:universal stößel: 45 grad<br/>weight of the machine ca.:65 t<br/>machine size (lxwxh):20.200 x 8.150 x 4.920  mm<br/>grinding wheel dresser: <br/>:plc siemens simatic op 27 <br/>grinding wheel with flange:diverse <br/>electronic wheel balancing device: <br/>levellig elements: <br/><br/>used surface grinding machine, elb, type swn 8 npc-k.  machine cleaned and tested by qualified technician functionality tested.  surface grinding machine in perfect condition, ready for production.  payment: 100% before loading the machine warranty: none GRINDING LENGTH:7000 MM
GRINDING WIDTH:1450 MM
WORKPIECE HEIGHT:1000 MM
DISTANCE BETWEEN COLUMNS:1510 MM
CLAMPING AREA:7.270 X 1.250 MM
TABLE LOAD:35 T
TABLE SPEEDS:1-50 M/MIN
GRINDING WHEEL DIA. X WIDTH:HORIZONTALER STößEL: 630X180 MM
SPINDLE DRIVE:HORIZONTALER STößEL: 22 KW
VERTICAL MOVEMENT:250 MM
GRINDING WHEEL DIA. X WIDTH:UNIVERSAL STößEL: 500X50 MM
SPINDLE DRIVE:UNIVERSAL STößEL: 7 KW
VERTICAL MOVEMENT:450 MM
SPINDLE MOTOR:7,5 KW
PIVOTING ANGLE:UNIVERSAL STößEL: 45 GRAD
WEIGHT OF THE MACHINE CA.:65 T
MACHINE SIZE (LXWXH):20.200 X 8.150 X 4.920 MM
GRINDING WHEEL DRESSER:
:PLC SIEMENS SIMATIC OP 27
GRINDING WHEEL WITH FLANGE:DIVERSE
ELECTRONIC WHEEL BALANCING DEVICE:
LEVELLIG ELEMENTS:

USED SURFACE GRINDING MACHINE, ELB, TYPE SWN 8 NPC-K. MACHINE CLEANED AND TESTED BY QUALIFIED TECHNICIAN FUNCTIONALITY TESTED. SURFACE GRINDING MACHINE IN PERFECT CONDITION, READY FOR PRODUCTION. PAYMENT: 100% BEFORE LOADING THE MACHINE WARRANTY: NONE
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 27.000 €
Ubicación: Land-used 2011 caterpillar m318d mobile excavator with bucket, quick coupler, blade, check valves, central greasing and aux. hydraulics. service records are available upon request. equipment details: configuration: weight: 19.4 tons bucket - bucket: no - cylinder: ok quick coupler - type: mechanical - brand / model: morin stick - stick length: 2.5 m - steel condition: ok - welded: ok - fishplated: ok - cylinder: ok - pins & bushings: ok auxiliary hydraulic - number of auxiliary hydraulic lines: 2 boom - boom type: mono - steel condition: ok - welded: ok - fishplated: ok - cracked: ok - cylinder: issue ? boom is dropping very slowly - pins & bushings: ok check valves - check valves boom: yes - check valves stick: yes cab - cab type and a/c: a/c cab tires - configuration: single - type: pneumatic - front left hand outside: issue (20 %) - front right hand outside: issue (20 %) - rear left hand outside: issue (20 %) - rear right hand outside: issue (20 %) wheels - size of tires: 18-19.5 cabin interior - cleanliness: imperfection - seat condition: ok - airconditioning: ok - windows: ok - switches: ok - gauges: ok - cab door: imperfection - wiper: ok - floor mat: ok - structure: ok engine - normal smoke level: ok - normal fluid level: ok - normal engine noises: ok - no engine blow by: imperfection ? minor blow by - belts condition: ok - cooling system: imperfection ? coolant level is low - oil condition: ok - exhaust: ok - no engine leaks: imperfection ? sump gasket is leaking - brand / model: caterpillar c6.6 hydraulics - hydraulic pump: ok - valve block: ok - ring gear: ok - swivel motor: ok carrier - car body condition: ok functional test - pins boom: ok - pins stick: ok - pins bucket: ok - swing drive/brake: ok - boom drift: imperfection - pump noises: ok - slew ring play: ok - electrics: ok - drive train: ok ? good but has oil leak on transmission there is transmission oil.and hydraulic oil leaking from above aswel - batteries: ok hour meter - hour meter reading: 9607 - hour meter verified: ok - verification method: by inspector central lube - brand / model: groeneveld dozer blade - width: 2.55 - condition: ok certifications - ce marked: yes - epa marked: yes

 USED 2011 CATERPILLAR M318D MOBILE EXCAVATOR WITH BUCKET, QUICK COUPLER, BLADE, CHECK VALVES, CENTRAL GREASING AND AUX. HYDRAULICS. SERVICE RECORDS ARE AVAILABLE UPON REQUEST. EQUIPMENT DETAILS: CONFIGURATION: WEIGHT: 19.4 TONS BUCKET - BUCKET: NO - CYLINDER: OK QUICK COUPLER - TYPE: MECHANICAL - BRAND / MODEL: MORIN STICK - STICK LENGTH: 2.5 M - STEEL CONDITION: OK - WELDED: OK - FISHPLATED: OK - CYLINDER: OK - PINS & BUSHINGS: OK AUXILIARY HYDRAULIC - NUMBER OF AUXILIARY HYDRAULIC LINES: 2 BOOM - BOOM TYPE: MONO - STEEL CONDITION: OK - WELDED: OK - FISHPLATED: OK - CRACKED: OK - CYLINDER: ISSUE ? BOOM IS DROPPING VERY SLOWLY - PINS & BUSHINGS: OK CHECK VALVES - CHECK VALVES BOOM: YES - CHECK VALVES STICK: YES CAB - CAB TYPE AND A/C: A/C CAB TIRES - CONFIGURATION: SINGLE - TYPE: PNEUMATIC - FRONT LEFT HAND OUTSIDE: ISSUE (20 %) - FRONT RIGHT HAND OUTSIDE: ISSUE (20 %) - REAR LEFT HAND OUTSIDE: ISSUE (20 %) - REAR RIGHT HAND OUTSIDE: ISSUE (20 %) WHEELS - SIZE OF TIRES: 18-19.5 CABIN INTERIOR - CLEANLINESS: IMPERFECTION - SEAT CONDITION: OK - AIRCONDITIONING: OK - WINDOWS: OK - SWITCHES: OK - GAUGES: OK - CAB DOOR: IMPERFECTION - WIPER: OK - FLOOR MAT: OK - STRUCTURE: OK ENGINE - NORMAL SMOKE LEVEL: OK - NORMAL FLUID LEVEL: OK - NORMAL ENGINE NOISES: OK - NO ENGINE BLOW BY: IMPERFECTION ? MINOR BLOW BY - BELTS CONDITION: OK - COOLING SYSTEM: IMPERFECTION ? COOLANT LEVEL IS LOW - OIL CONDITION: OK - EXHAUST: OK - NO ENGINE LEAKS: IMPERFECTION ? SUMP GASKET IS LEAKING - BRAND / MODEL: CATERPILLAR C6.6 HYDRAULICS - HYDRAULIC PUMP: OK - VALVE BLOCK: OK - RING GEAR: OK - SWIVEL MOTOR: OK CARRIER - CAR BODY CONDITION: OK FUNCTIONAL TEST - PINS BOOM: OK - PINS STICK: OK - PINS BUCKET: OK - SWING DRIVE/BRAKE: OK - BOOM DRIFT: IMPERFECTION - PUMP NOISES: OK - SLEW RING PLAY: OK - ELECTRICS: OK - DRIVE TRAIN: OK ? GOOD BUT HAS OIL LEAK ON TRANSMISSION THERE IS TRANSMISSION OIL.AND HYDRAULIC OIL LEAKING FROM ABOVE ASWEL - BATTERIES: OK HOUR METER - HOUR METER READING: 9607 - HOUR METER VERIFIED: OK - VERIFICATION METHOD: BY INSPECTOR CENTRAL LUBE - BRAND / MODEL: GROENEVELD DOZER BLADE - WIDTH: 2.55 - CONDITION: OK CERTIFICATIONS - CE MARKED: YES - EPA MARKED: YES
Vendedor: Machinery World LTD
Año de construcción: usado
Ubicación: Land-grinding length:700 mm<br/>grinding width:550 mm<br/>workpiece height: mm<br/>table length:1100 mm<br/>:500 kg<br/>table width:500 mm<br/>grinding spindle drive:10-34 kw<br/>grinding wheel diameter:400 mm<br/>grinding wheel width:100 mm<br/>:127 mm<br/>weight of the machine ca.:4700 kg<br/>dimensions of the machine ca.:3700x2800x2500 mm<br/><br/>used surface grinding machine, make elb, hahn & kolb, orion 755 nc k, built in 1981  - machine with automatic infeed for all 3 axes. - digital display for vertical feed y position and stepover z position  machine thoroughly cleaned by qualified technician. complete functionality tested. machine equipped with a new paint. green ral 6011  machine in perfect condition  accessories: - electro-magnetic chuck with straight, fine pole pitch, 700x500 mm - dressing device mounted on the grinding wheel for automatic dressing, type swd 28 216 58 - 1 piece of used grinding wheel - 1 piece complete. coolant system - 1 set of mounting elements - complete technical documentation in german  payment: 100% before loading the machine  warranty: none  shows similar GRINDING LENGTH:700 MM
GRINDING WIDTH:550 MM
WORKPIECE HEIGHT: MM
TABLE LENGTH:1100 MM
:500 KG
TABLE WIDTH:500 MM
GRINDING SPINDLE DRIVE:10-34 KW
GRINDING WHEEL DIAMETER:400 MM
GRINDING WHEEL WIDTH:100 MM
:127 MM
WEIGHT OF THE MACHINE CA.:4700 KG
DIMENSIONS OF THE MACHINE CA.:3700X2800X2500 MM

USED SURFACE GRINDING MACHINE, MAKE ELB, HAHN & KOLB, ORION 755 NC K, BUILT IN 1981 - MACHINE WITH AUTOMATIC INFEED FOR ALL 3 AXES. - DIGITAL DISPLAY FOR VERTICAL FEED Y POSITION AND STEPOVER Z POSITION MACHINE THOROUGHLY CLEANED BY QUALIFIED TECHNICIAN. COMPLETE FUNCTIONALITY TESTED. MACHINE EQUIPPED WITH A NEW PAINT. GREEN RAL 6011 MACHINE IN PERFECT CONDITION ACCESSORIES: - ELECTRO-MAGNETIC CHUCK WITH STRAIGHT, FINE POLE PITCH, 700X500 MM - DRESSING DEVICE MOUNTED ON THE GRINDING WHEEL FOR AUTOMATIC DRESSING, TYPE SWD 28 216 58 - 1 PIECE OF USED GRINDING WHEEL - 1 PIECE COMPLETE. COOLANT SYSTEM - 1 SET OF MOUNTING ELEMENTS - COMPLETE TECHNICAL DOCUMENTATION IN GERMAN PAYMENT: 100% BEFORE LOADING THE MACHINE WARRANTY: NONE SHOWS SIMILAR
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 30.000 €
Ubicación: Land-2010 terex tc125

make & model	terex tc125
year 	2010
running hours	1932
load capacity	---
type	tracked excavator
condition	used

equipment details: configuration: serial number: tc01250490 weight: 12.8 tons bucket - bucket: no - cylinder: ok quick coupler - type: hydraulic - brand / model: lehnhoff swe ms08 stick - stick length: 2 m - steel condition: ok - welded: ok - fishplated: ok - cylinder: ok - pins & bushings: imperfection ? medium play auxiliary hydraulic - number of auxiliary hydraulic lines: unit equipped with two aux. hydraulic lines boom - boom type: swingaway boom - steel condition: ok - welded: ok - fishplated: ok - cracked: ok - cylinder: imperfection ? boom cylinder drifting down slowly. it needs to be checked for internal leaks - pins & bushings: imperfection ? medium play cab - cab type and a/c: cab pads - pads type: rubber inserts - pad width: 500 mm overall - overall condition: ok ? the machine is in general good condition. some smaller repairs and replacements recommended. the park brake lever does not engage cabin interior - cleanliness: ok - seat condition: ok - switches: ok - gauges: ok - cab door: imperfection ? inside plastic cover is cracked - wiper: ok - floor mat: ok - structure: ok engine - normal smoke level: ok - normal fluid level: ok - normal engine noises: ok - no engine blow by: ok - belts condition: ok - cooling system: ok - oil condition: ok - exhaust: ok - no engine leaks: ok - brand / model: deutz tcd2012l04-2v - engine serial number: 10862363 hydraulics - hydraulic pump: ok - valve block: ok - ring gear: ok - swivel motor: ok undercarriage - pads: issue (0 %) ? rubber pads worn - idler: ok (70 %) - top roller: ok (70 %) - bottom roller: ok (70 %) - sprocket: ok (60 %) track structure - track motor condition: ok - track frame condition: ok carrier - car body condition: ok functional test - pins boom: imperfection ? medium play - pins stick: imperfection ? medium play - pins bucket: imperfection ? medium play - swing drive/brake: ok - slew ring play: ok - electrics: ok - drive train: ok hour meter - hour meter reading: 1932 - hour meter verified: ok - verification method: with system readout certifications - ce marked: yes - epa marked: yes

 2010 TEREX TC125 MAKE & MODEL TEREX TC125 YEAR 2010 RUNNING HOURS 1932 LOAD CAPACITY --- TYPE TRACKED EXCAVATOR CONDITION USED EQUIPMENT DETAILS: CONFIGURATION: SERIAL NUMBER: TC01250490 WEIGHT: 12.8 TONS BUCKET - BUCKET: NO - CYLINDER: OK QUICK COUPLER - TYPE: HYDRAULIC - BRAND / MODEL: LEHNHOFF SWE MS08 STICK - STICK LENGTH: 2 M - STEEL CONDITION: OK - WELDED: OK - FISHPLATED: OK - CYLINDER: OK - PINS & BUSHINGS: IMPERFECTION ? MEDIUM PLAY AUXILIARY HYDRAULIC - NUMBER OF AUXILIARY HYDRAULIC LINES: UNIT EQUIPPED WITH TWO AUX. HYDRAULIC LINES BOOM - BOOM TYPE: SWINGAWAY BOOM - STEEL CONDITION: OK - WELDED: OK - FISHPLATED: OK - CRACKED: OK - CYLINDER: IMPERFECTION ? BOOM CYLINDER DRIFTING DOWN SLOWLY. IT NEEDS TO BE CHECKED FOR INTERNAL LEAKS - PINS & BUSHINGS: IMPERFECTION ? MEDIUM PLAY CAB - CAB TYPE AND A/C: CAB PADS - PADS TYPE: RUBBER INSERTS - PAD WIDTH: 500 MM OVERALL - OVERALL CONDITION: OK ? THE MACHINE IS IN GENERAL GOOD CONDITION. SOME SMALLER REPAIRS AND REPLACEMENTS RECOMMENDED. THE PARK BRAKE LEVER DOES NOT ENGAGE CABIN INTERIOR - CLEANLINESS: OK - SEAT CONDITION: OK - SWITCHES: OK - GAUGES: OK - CAB DOOR: IMPERFECTION ? INSIDE PLASTIC COVER IS CRACKED - WIPER: OK - FLOOR MAT: OK - STRUCTURE: OK ENGINE - NORMAL SMOKE LEVEL: OK - NORMAL FLUID LEVEL: OK - NORMAL ENGINE NOISES: OK - NO ENGINE BLOW BY: OK - BELTS CONDITION: OK - COOLING SYSTEM: OK - OIL CONDITION: OK - EXHAUST: OK - NO ENGINE LEAKS: OK - BRAND / MODEL: DEUTZ TCD2012L04-2V - ENGINE SERIAL NUMBER: 10862363 HYDRAULICS - HYDRAULIC PUMP: OK - VALVE BLOCK: OK - RING GEAR: OK - SWIVEL MOTOR: OK UNDERCARRIAGE - PADS: ISSUE (0 %) ? RUBBER PADS WORN - IDLER: OK (70 %) - TOP ROLLER: OK (70 %) - BOTTOM ROLLER: OK (70 %) - SPROCKET: OK (60 %) TRACK STRUCTURE - TRACK MOTOR CONDITION: OK - TRACK FRAME CONDITION: OK CARRIER - CAR BODY CONDITION: OK FUNCTIONAL TEST - PINS BOOM: IMPERFECTION ? MEDIUM PLAY - PINS STICK: IMPERFECTION ? MEDIUM PLAY - PINS BUCKET: IMPERFECTION ? MEDIUM PLAY - SWING DRIVE/BRAKE: OK - SLEW RING PLAY: OK - ELECTRICS: OK - DRIVE TRAIN: OK HOUR METER - HOUR METER READING: 1932 - HOUR METER VERIFIED: OK - VERIFICATION METHOD: WITH SYSTEM READOUT CERTIFICATIONS - CE MARKED: YES - EPA MARKED: YES
Vendedor: Machinery World LTD
Año de construcción: usado
Ubicación: Land-x-travel:900 mm<br/>y-travel:650 mm<br/>z-travel:450 mm<br/>table load:800 kg<br/>:1235x460 mm<br/>t-slot (width-distance-quantity):5 x 18 x 80 mm<br/>spindle taper:40 iso<br/>turning speed range:(27 stufen) 30 - 2050 u/min<br/>distance spindle nose and table:32 ? 482 mm<br/>feeds:x/y/z: 10-1000 / 10-1000 /6-640 mm/min<br/>rapid travel x/y/z:2200 / 2200 / 1100 mm/min<br/>power capacity:5,5/7,5 kw<br/>weight of the machine ca.:4 t<br/>machine dimensions lxwxh:1835 x 2362 x 2090 mm<br/>universal milling head:manuell schwenkbar, 360° <br/>dro: <br/>central lubrication: <br/>halogen lamp: <br/>: <br/>european electric: <br/>: <br/>ce-design: <br/>: <br/>servo motors:in allen achsen <br/>machine vice: <br/>round table, manual : <br/>milling and boring equipment: <br/>cnc controls from:siemens/fanuc/heidenhain <br/>semi guarding: <br/><br/>features ? servo motors drive for x, y, z three axes ? handwheel can be equipped for easy tool setting and smoothly axis moving ? robust & rugged machine body made of high grade casting assuring superb stability and long lasting life. ? fine elaborate workmanship with great care and neat appearance with perfect paint finish. ? precision-ground guideways with hardened surface for long-term accuracy and wear-resistance. ? preloaded ball screw with zero backlash for easy and precise feeds ? simultaneous axis movement ? turcite-b coated guides ? dovetail guide on x axis ? square guides on y, z axes ? swivelling control panel, fully equipped with all operating controls ? automatic lubrication ? spindle brakes ? equipment according to ce ? large work area of 500x1600mm, opt. 500x2000mm and up to 1800 kg table load capacity. ? vertical universal head rotates 360° for versatile cutting performance. ? high speed vertical universal head firmly fixed on ram for robust & heavy cutting performance. ? separate button for rapid traverse of axes, aside automatic feeding, for easier operation and less idle time. ? compulsory lubrication of horizontal milling spindle transmission gears for smooth running. ? modular design with wide options for diverse needs: 2-axis dro unit, 3-axis dro unit, table guards, spindle guards, indexing dividing heads, various clamping kits, vices, tool holders, etc. X-TRAVEL:900 MM
Y-TRAVEL:650 MM
Z-TRAVEL:450 MM
TABLE LOAD:800 KG
:1235X460 MM
T-SLOT (WIDTH-DISTANCE-QUANTITY):5 X 18 X 80 MM
SPINDLE TAPER:40 ISO
TURNING SPEED RANGE:(27 STUFEN) 30 - 2050 U/MIN
DISTANCE SPINDLE NOSE AND TABLE:32 ? 482 MM
FEEDS:X/Y/Z: 10-1000 / 10-1000 /6-640 MM/MIN
RAPID TRAVEL X/Y/Z:2200 / 2200 / 1100 MM/MIN
POWER CAPACITY:5,5/7,5 KW
WEIGHT OF THE MACHINE CA.:4 T
MACHINE DIMENSIONS LXWXH:1835 X 2362 X 2090 MM
UNIVERSAL MILLING HEAD:MANUELL SCHWENKBAR, 360°
DRO:
CENTRAL LUBRICATION:
HALOGEN LAMP:
:
EUROPEAN ELECTRIC:
:
CE-DESIGN:
:
SERVO MOTORS:IN ALLEN ACHSEN
MACHINE VICE:
ROUND TABLE, MANUAL :
MILLING AND BORING EQUIPMENT:
CNC CONTROLS FROM:SIEMENS/FANUC/HEIDENHAIN
SEMI GUARDING:

FEATURES ? SERVO MOTORS DRIVE FOR X, Y, Z THREE AXES ? HANDWHEEL CAN BE EQUIPPED FOR EASY TOOL SETTING AND SMOOTHLY AXIS MOVING ? ROBUST & RUGGED MACHINE BODY MADE OF HIGH GRADE CASTING ASSURING SUPERB STABILITY AND LONG LASTING LIFE. ? FINE ELABORATE WORKMANSHIP WITH GREAT CARE AND NEAT APPEARANCE WITH PERFECT PAINT FINISH. ? PRECISION-GROUND GUIDEWAYS WITH HARDENED SURFACE FOR LONG-TERM ACCURACY AND WEAR-RESISTANCE. ? PRELOADED BALL SCREW WITH ZERO BACKLASH FOR EASY AND PRECISE FEEDS ? SIMULTANEOUS AXIS MOVEMENT ? TURCITE-B COATED GUIDES ? DOVETAIL GUIDE ON X AXIS ? SQUARE GUIDES ON Y, Z AXES ? SWIVELLING CONTROL PANEL, FULLY EQUIPPED WITH ALL OPERATING CONTROLS ? AUTOMATIC LUBRICATION ? SPINDLE BRAKES ? EQUIPMENT ACCORDING TO CE ? LARGE WORK AREA OF 500X1600MM, OPT. 500X2000MM AND UP TO 1800 KG TABLE LOAD CAPACITY. ? VERTICAL UNIVERSAL HEAD ROTATES 360° FOR VERSATILE CUTTING PERFORMANCE. ? HIGH SPEED VERTICAL UNIVERSAL HEAD FIRMLY FIXED ON RAM FOR ROBUST & HEAVY CUTTING PERFORMANCE. ? SEPARATE BUTTON FOR RAPID TRAVERSE OF AXES, ASIDE AUTOMATIC FEEDING, FOR EASIER OPERATION AND LESS IDLE TIME. ? COMPULSORY LUBRICATION OF HORIZONTAL MILLING SPINDLE TRANSMISSION GEARS FOR SMOOTH RUNNING. ? MODULAR DESIGN WITH WIDE OPTIONS FOR DIVERSE NEEDS: 2-AXIS DRO UNIT, 3-AXIS DRO UNIT, TABLE GUARDS, SPINDLE GUARDS, INDEXING DIVIDING HEADS, VARIOUS CLAMPING KITS, VICES, TOOL HOLDERS, ETC.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-the cy270n is the perfect universal band saw for every metal worker, artisan, or any other company.

-the machine is suitable for the cutting of steel, stainless steel and aluminium profiles.
-blade - page guide each 6-set of ball bearings
blade back guide set of ball bearings
-manometer for belt tension
-ergonomic handle
electrical kã¼hlmittellpumpe
-hydrauliches lowering the saw frame (adjustable)
-automatic shut-off
-2 reversible saw speeds
-with sturdy pedestal

data
connection voltage 400 v
motor power 1100 w
coolant pump 100 w
weight approx. 190 kg
machine dimensions lxdxh 1430 x 720 x 1700 mm
cutting speeds 45 + 90 m / min
band saw blade dimensions 2480 x 27 x 0,9 mm
working height 910 mm
cutting capacity round 90 â° and 225 mm
cutting capacity 90 â° 200 x 200 mm square
section flat 90 â° 245 x 150 mm
cutting area around 45â° 160 mm
section square 45 â° 160 x 160 mm
cutting area around 60 â° 100 mm
cutting range, square 60 â° 100 x 100 mm

scope of delivery:
bi metal saw strip
workpiece stop THE CY270N IS THE PERFECT UNIVERSAL BAND SAW FOR EVERY METAL WORKER, ARTISAN, OR ANY OTHER COMPANY. -THE MACHINE IS SUITABLE FOR THE CUTTING OF STEEL, STAINLESS STEEL AND ALUMINIUM PROFILES. -BLADE - PAGE GUIDE EACH 6-SET OF BALL BEARINGS BLADE BACK GUIDE SET OF BALL BEARINGS -MANOMETER FOR BELT TENSION -ERGONOMIC HANDLE ELECTRICAL K&ATILDE;&FRAC14;HLMITTELLPUMPE -HYDRAULICHES LOWERING THE SAW FRAME (ADJUSTABLE) -AUTOMATIC SHUT-OFF -2 REVERSIBLE SAW SPEEDS -WITH STURDY PEDESTAL DATA CONNECTION VOLTAGE 400 V MOTOR POWER 1100 W COOLANT PUMP 100 W WEIGHT APPROX. 190 KG MACHINE DIMENSIONS LXDXH 1430 X 720 X 1700 MM CUTTING SPEEDS 45 + 90 M / MIN BAND SAW BLADE DIMENSIONS 2480 X 27 X 0,9 MM WORKING HEIGHT 910 MM CUTTING CAPACITY ROUND 90 &ACIRC;&DEG; AND 225 MM CUTTING CAPACITY 90 &ACIRC;&DEG; 200 X 200 MM SQUARE SECTION FLAT 90 &ACIRC;&DEG; 245 X 150 MM CUTTING AREA AROUND 45&ACIRC;&DEG; 160 MM SECTION SQUARE 45 &ACIRC;&DEG; 160 X 160 MM CUTTING AREA AROUND 60 &ACIRC;&DEG; 100 MM CUTTING RANGE, SQUARE 60 &ACIRC;&DEG; 100 X 100 MM SCOPE OF DELIVERY: BI METAL SAW STRIP WORKPIECE STOP
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Ubicación: Land-grinding length:700 mm<br/>grinding width:400 mm<br/>workpiece height:350 mm<br/>surface area:1100x300 mm<br/>spindle drive:6,8 ps<br/>hydraulic pump engine:2 ps<br/>cross feed motor:0,33 ps<br/>:1800x1200 mm<br/>grinding wheel speeds:1400 u/min<br/>total power requirement:11 kw<br/>weight of the machine ca.:3100 kg<br/><br/>used / overhauled surface grinding machine, make elb, type swb 06 va ii-k, machine no. 114461172  machine with automatic notification in all 3 axes.  machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality. wear parts replaced defective components reparariert or replaced. reassembly, compl. functional testing and internal loss. machine in absolute working condition. machine repainted. machine in perfect, produktionsbereitem state.  accessories: - electric magnetic chuck with coarse / fine pole pitch, dimensions 600x500 mm - demagnetisiereinrichtung installed in the control cabinet - manual micrometric abrichtapparat mounted above the grinding wheel - 1 piece grinding wheel - complete coolant system - setting up / leveling -. technical documentation in german  all machines are connected prior to delivery, tested and verified all of the functions.  payment: 100% before loading the machine warranty: no  fig. similar. GRINDING LENGTH:700 MM
GRINDING WIDTH:400 MM
WORKPIECE HEIGHT:350 MM
SURFACE AREA:1100X300 MM
SPINDLE DRIVE:6,8 PS
HYDRAULIC PUMP ENGINE:2 PS
CROSS FEED MOTOR:0,33 PS
:1800X1200 MM
GRINDING WHEEL SPEEDS:1400 U/MIN
TOTAL POWER REQUIREMENT:11 KW
WEIGHT OF THE MACHINE CA.:3100 KG

USED / OVERHAULED SURFACE GRINDING MACHINE, MAKE ELB, TYPE SWB 06 VA II-K, MACHINE NO. 114461172 MACHINE WITH AUTOMATIC NOTIFICATION IN ALL 3 AXES. MACHINE COMPLETELY DISMANTLED, CLEANED ALL THE COMPONENTS THOROUGHLY AND CHECKED FOR COMPLETE FUNCTIONALITY. WEAR PARTS REPLACED DEFECTIVE COMPONENTS REPARARIERT OR REPLACED. REASSEMBLY, COMPL. FUNCTIONAL TESTING AND INTERNAL LOSS. MACHINE IN ABSOLUTE WORKING CONDITION. MACHINE REPAINTED. MACHINE IN PERFECT, PRODUKTIONSBEREITEM STATE. ACCESSORIES: - ELECTRIC MAGNETIC CHUCK WITH COARSE / FINE POLE PITCH, DIMENSIONS 600X500 MM - DEMAGNETISIEREINRICHTUNG INSTALLED IN THE CONTROL CABINET - MANUAL MICROMETRIC ABRICHTAPPARAT MOUNTED ABOVE THE GRINDING WHEEL - 1 PIECE GRINDING WHEEL - COMPLETE COOLANT SYSTEM - SETTING UP / LEVELING -. TECHNICAL DOCUMENTATION IN GERMAN ALL MACHINES ARE CONNECTED PRIOR TO DELIVERY, TESTED AND VERIFIED ALL OF THE FUNCTIONS. PAYMENT: 100% BEFORE LOADING THE MACHINE WARRANTY: NO FIG. SIMILAR.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 26.000 €
Ubicación: Land-max size:                   370 x 520 mm
min size:                   105 x 145 mm
equipment:
alcolor 
technotrans
wasching device
autoplate
perfecting
grafix 
eltex 

 MAX SIZE: 370 X 520 MM MIN SIZE: 105 X 145 MM EQUIPMENT: ALCOLOR TECHNOTRANS WASCHING DEVICE AUTOPLATE PERFECTING GRAFIX ELTEX
Vendedor: 4print
Año de construcción: usado
Ubicación: Land-grinding length:600 mm<br/>grinding width:300 mm<br/>workpiece height:375 mm<br/>max. table load:300 kg<br/>dimensions of grinding wheel:300x76,2x50 mm<br/>weight of the machine ca.:3800 kg<br/>spindle drive:2,8 - 8,4 kw (100% ed) kw<br/><br/>used / overhauled surface grinding machine, make elb, type super rubin 024 nc-k. machine no. 189910186  machine bed made microgranitan. machine with table drive system via a toothed belt. very smooth running. schnellhubsystem. table speed controllable.  machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality. wear parts replaced defective components reparariert or replaced. reassembly, compl. functional testing and internal loss. machine in absolute working condition. machine repainted. machine in perfect, produktionsbereitem state.  machine with automatic notification in all 3 axes.  machine repainted. ral6011  machine in perfect condition  accessories: - 2-axis digital display for y and z-axis - electric magnetic chuck 600x300mm with 4x pendelpolteilung - demagnetisiereinrichtung installed in the control cabinet - motor straight dresser with compensation mounted on the left side of the grinding wheel guard - dress form profilabrichter model ssb30 mounted above the grinding wheel guard for profile dressing of the grinding wheel. - complete coolant system - 1 piece grinding wheel - 1 piece lays / leveling - 1 machine light - technical documentation in german language  payment: 100% before loading the machine warranty: no GRINDING LENGTH:600 MM
GRINDING WIDTH:300 MM
WORKPIECE HEIGHT:375 MM
MAX. TABLE LOAD:300 KG
DIMENSIONS OF GRINDING WHEEL:300X76,2X50 MM
WEIGHT OF THE MACHINE CA.:3800 KG
SPINDLE DRIVE:2,8 - 8,4 KW (100% ED) KW

USED / OVERHAULED SURFACE GRINDING MACHINE, MAKE ELB, TYPE SUPER RUBIN 024 NC-K. MACHINE NO. 189910186 MACHINE BED MADE MICROGRANITAN. MACHINE WITH TABLE DRIVE SYSTEM VIA A TOOTHED BELT. VERY SMOOTH RUNNING. SCHNELLHUBSYSTEM. TABLE SPEED CONTROLLABLE. MACHINE COMPLETELY DISMANTLED, CLEANED ALL THE COMPONENTS THOROUGHLY AND CHECKED FOR COMPLETE FUNCTIONALITY. WEAR PARTS REPLACED DEFECTIVE COMPONENTS REPARARIERT OR REPLACED. REASSEMBLY, COMPL. FUNCTIONAL TESTING AND INTERNAL LOSS. MACHINE IN ABSOLUTE WORKING CONDITION. MACHINE REPAINTED. MACHINE IN PERFECT, PRODUKTIONSBEREITEM STATE. MACHINE WITH AUTOMATIC NOTIFICATION IN ALL 3 AXES. MACHINE REPAINTED. RAL6011 MACHINE IN PERFECT CONDITION ACCESSORIES: - 2-AXIS DIGITAL DISPLAY FOR Y AND Z-AXIS - ELECTRIC MAGNETIC CHUCK 600X300MM WITH 4X PENDELPOLTEILUNG - DEMAGNETISIEREINRICHTUNG INSTALLED IN THE CONTROL CABINET - MOTOR STRAIGHT DRESSER WITH COMPENSATION MOUNTED ON THE LEFT SIDE OF THE GRINDING WHEEL GUARD - DRESS FORM PROFILABRICHTER MODEL SSB30 MOUNTED ABOVE THE GRINDING WHEEL GUARD FOR PROFILE DRESSING OF THE GRINDING WHEEL. - COMPLETE COOLANT SYSTEM - 1 PIECE GRINDING WHEEL - 1 PIECE LAYS / LEVELING - 1 MACHINE LIGHT - TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE PAYMENT: 100% BEFORE LOADING THE MACHINE WARRANTY: NO
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 700 €
Ubicación: Land-vacuum machine kv 510 - stand unit
 
â?¢ vacuum pump 20 mâ³/h, 99% vacuum
â?¢ chamber dimensions: 550 x 550 x 140 h mm
â?¢ perfect hygiene thanks to removable sealing bars
â?¢ seal seam length: 510 mm, seam width: 10 mm
â?¢ suitable for edge seal bags up to 500 mm width
â?¢ standing model with castors, 2 with brake
â?¢ mounting bracket for convex lid

vakummmachine almost unused, as new. run only a few hours of operation, sale due to stop-making operation.

new price 2400 euro  VACUUM MACHINE KV 510 - STAND UNIT &ACIRC;?&CENT; VACUUM PUMP 20 M&ACIRC;&SUP3;/H, 99% VACUUM &ACIRC;?&CENT; CHAMBER DIMENSIONS: 550 X 550 X 140 H MM &ACIRC;?&CENT; PERFECT HYGIENE THANKS TO REMOVABLE SEALING BARS &ACIRC;?&CENT; SEAL SEAM LENGTH: 510 MM, SEAM WIDTH: 10 MM &ACIRC;?&CENT; SUITABLE FOR EDGE SEAL BAGS UP TO 500 MM WIDTH &ACIRC;?&CENT; STANDING MODEL WITH CASTORS, 2 WITH BRAKE &ACIRC;?&CENT; MOUNTING BRACKET FOR CONVEX LID VAKUMMMACHINE ALMOST UNUSED, AS NEW. RUN ONLY A FEW HOURS OF OPERATION, SALE DUE TO STOP-MAKING OPERATION. NEW PRICE 2400 EURO
Vendedor: Olisi Mediterranean Products
Año de construcción: usado
Ubicación: Land-grinding length:600 mm<br/>grinding width:450 mm<br/>workpiece height:450 mm<br/>weight of the machine ca.:4000 kg<br/>table speeds:2-24 m/min<br/>cross travel:460 mm<br/>rapid traverse cross:1200 mm/min<br/>cross feed autom.:1-60 mm/hub<br/>rapid traverse vertical:0,15 m/min<br/>dimensions of grinding wheel:300x50x76 mm<br/>grinding wheel speeds:1400/2800 u/min<br/>grinding spindle drive:5/6 kw<br/>total power requirement:13 kw<br/>table surface area:1100x450 mm<br/><br/>used/overhauled surface grinding machine, make elb, type swbe 6, year of construction 1977.   machine with automatic feed in all 3 axes.  scope of overhaul:  machine completely disassembled, all components thoroughly cleaned and checked for complete functionality.  all guideways newly scraped to new machine geometry. spindle rotation less than 5µ. wear parts replaced, defective components repaired or renewed. re-assembly, complete function test and internal acceptance.  machine in absolutely functional condition. machine repainted. machine in perfect condition, ready for production.  accessories: - electric magnet clamping plate, size 600x400mm, with straight, fine pole pitch. - demagnetizing device installed on the switch cabinet - 1 piece grinding wheel flange - 1 piece tightening / forcing screw - complete coolant system - 1 set of installation/levelling elements - technical documentation in german language  further information can be found in the appendix.  payment:  - 50% at order placement / start of overhaul - 50% before loading of the machine  warranty: 12 months on the geometry and the demonstrably installed new parts. no general statutory warranty.  fig. from brochure for new machines GRINDING LENGTH:600 MM
GRINDING WIDTH:450 MM
WORKPIECE HEIGHT:450 MM
WEIGHT OF THE MACHINE CA.:4000 KG
TABLE SPEEDS:2-24 M/MIN
CROSS TRAVEL:460 MM
RAPID TRAVERSE CROSS:1200 MM/MIN
CROSS FEED AUTOM.:1-60 MM/HUB
RAPID TRAVERSE VERTICAL:0,15 M/MIN
DIMENSIONS OF GRINDING WHEEL:300X50X76 MM
GRINDING WHEEL SPEEDS:1400/2800 U/MIN
GRINDING SPINDLE DRIVE:5/6 KW
TOTAL POWER REQUIREMENT:13 KW
TABLE SURFACE AREA:1100X450 MM

USED/OVERHAULED SURFACE GRINDING MACHINE, MAKE ELB, TYPE SWBE 6, YEAR OF CONSTRUCTION 1977. MACHINE WITH AUTOMATIC FEED IN ALL 3 AXES. SCOPE OF OVERHAUL: MACHINE COMPLETELY DISASSEMBLED, ALL COMPONENTS THOROUGHLY CLEANED AND CHECKED FOR COMPLETE FUNCTIONALITY. ALL GUIDEWAYS NEWLY SCRAPED TO NEW MACHINE GEOMETRY. SPINDLE ROTATION LESS THAN 5µ. WEAR PARTS REPLACED, DEFECTIVE COMPONENTS REPAIRED OR RENEWED. RE-ASSEMBLY, COMPLETE FUNCTION TEST AND INTERNAL ACCEPTANCE. MACHINE IN ABSOLUTELY FUNCTIONAL CONDITION. MACHINE REPAINTED. MACHINE IN PERFECT CONDITION, READY FOR PRODUCTION. ACCESSORIES: - ELECTRIC MAGNET CLAMPING PLATE, SIZE 600X400MM, WITH STRAIGHT, FINE POLE PITCH. - DEMAGNETIZING DEVICE INSTALLED ON THE SWITCH CABINET - 1 PIECE GRINDING WHEEL FLANGE - 1 PIECE TIGHTENING / FORCING SCREW - COMPLETE COOLANT SYSTEM - 1 SET OF INSTALLATION/LEVELLING ELEMENTS - TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE FURTHER INFORMATION CAN BE FOUND IN THE APPENDIX. PAYMENT: - 50% AT ORDER PLACEMENT / START OF OVERHAUL - 50% BEFORE LOADING OF THE MACHINE WARRANTY: 12 MONTHS ON THE GEOMETRY AND THE DEMONSTRABLY INSTALLED NEW PARTS. NO GENERAL STATUTORY WARRANTY. FIG. FROM BROCHURE FOR NEW MACHINES
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-banding machine of tã¼nkers liliput 210; good condition; cleaned and checked. working width 210 mm; 2 rollers; suitable for cold glue.

gluing machine tã¼nkers liliput 210; good condition; cleaned and checked; working width 210mm; 2 rollers; used for cold glue. BANDING MACHINE OF T&ATILDE;&FRAC14;NKERS LILIPUT 210; GOOD CONDITION; CLEANED AND CHECKED. WORKING WIDTH 210 MM; 2 ROLLERS; SUITABLE FOR COLD GLUE. GLUING MACHINE T&ATILDE;&FRAC14;NKERS LILIPUT 210; GOOD CONDITION; CLEANED AND CHECKED; WORKING WIDTH 210MM; 2 ROLLERS; USED FOR COLD GLUE.
Vendedor: Joachim Ethner Handelsvertretungen
Año de construcción: usado
Ubicación: Land-x-travel:1500 mm<br/>y-travel:650 mm<br/>z-travel:500 mm<br/>table-size:500x2200 mm<br/>spindle drive:11 kw<br/>max. table load:1200 kg<br/>t-slot (width-distance-quantity):20mm x 100mm x 4 <br/>spindle taper iso:50 <br/>spindle speed:6-300 1/min, 30-1500 1/min / 2 stufig <br/>universal head:360° (manuell schwenkbar) <br/>distance spindle center to table:vertikale spindel: 6? 650 mm<br/>distance spindle center to table:horiz. spindel: 8-660 mm<br/>feeds:2.5-3000 /2.5-2500 mm/min<br/>rapid speed:6000 / 6000 / 3000 mm/min<br/>power of feed servo motor :18/23/18 nm<br/>overall size:3220 x 2420 x 2800 mm<br/>weight approx.:7300 kg<br/>3-axis dro: <br/>coolant system: <br/>: <br/>: <br/>led work light: <br/>european electric: <br/>draw bar: <br/>iso50 end milling tool shank dia. 27mm:27mm, 1 stück <br/>automatic lubrication system: <br/>ce-design: <br/>hand wheels:elektrisch, für alle achsen <br/>: <br/>screws cover:wegklappbar <br/><br/>features of bed type milling machine ? servo motors drive for x, y, z three axes ? handwheel can be equipped for easy tool setting and smoothly axis moving ? robust & rugged machine body made of high grade casting assuring superb stability and long lasting life. ? fine elaborate workmanship with great care and neat appearance with perfect paint finish. ? precision-ground guideways with hardened surface for long-term accuracy and wear-resistance. ? preloaded ball screw with zero backlash for easy and precise feeds ? simultaneous axis movement ? turcite-b coated guides ? swivelling control panel, fully equipped with all operating controls ? automatic lubrication ? spindle brakes ? equipment according to ce ? large work area of 500x2200mm and up to 1200 kg table load capacity. ? vertical universal head rotates 360° for versatile cutting performance. ? high speed vertical universal head for robust & heavy cutting performance. ? separate button for rapid traverse of axes, aside automatic feeding, for easier operation and less idle time. ? compulsory lubrication of horizontal milling spindle transmission gears for smooth running. ? modular design with wide options for diverse needs: 2-axis dro unit, 3-axis dro unit, table guards, spindle guards, indexing dividing heads, various clamping kits, vices, tool holders, etc. X-TRAVEL:1500 MM
Y-TRAVEL:650 MM
Z-TRAVEL:500 MM
TABLE-SIZE:500X2200 MM
SPINDLE DRIVE:11 KW
MAX. TABLE LOAD:1200 KG
T-SLOT (WIDTH-DISTANCE-QUANTITY):20MM X 100MM X 4
SPINDLE TAPER ISO:50
SPINDLE SPEED:6-300 1/MIN, 30-1500 1/MIN / 2 STUFIG
UNIVERSAL HEAD:360° (MANUELL SCHWENKBAR)
DISTANCE SPINDLE CENTER TO TABLE:VERTIKALE SPINDEL: 6? 650 MM
DISTANCE SPINDLE CENTER TO TABLE:HORIZ. SPINDEL: 8-660 MM
FEEDS:2.5-3000 /2.5-2500 MM/MIN
RAPID SPEED:6000 / 6000 / 3000 MM/MIN
POWER OF FEED SERVO MOTOR :18/23/18 NM
OVERALL SIZE:3220 X 2420 X 2800 MM
WEIGHT APPROX.:7300 KG
3-AXIS DRO:
COOLANT SYSTEM:
:
:
LED WORK LIGHT:
EUROPEAN ELECTRIC:
DRAW BAR:
ISO50 END MILLING TOOL SHANK DIA. 27MM:27MM, 1 STüCK
AUTOMATIC LUBRICATION SYSTEM:
CE-DESIGN:
HAND WHEELS:ELEKTRISCH, FüR ALLE ACHSEN
:
SCREWS COVER:WEGKLAPPBAR

FEATURES OF BED TYPE MILLING MACHINE ? SERVO MOTORS DRIVE FOR X, Y, Z THREE AXES ? HANDWHEEL CAN BE EQUIPPED FOR EASY TOOL SETTING AND SMOOTHLY AXIS MOVING ? ROBUST & RUGGED MACHINE BODY MADE OF HIGH GRADE CASTING ASSURING SUPERB STABILITY AND LONG LASTING LIFE. ? FINE ELABORATE WORKMANSHIP WITH GREAT CARE AND NEAT APPEARANCE WITH PERFECT PAINT FINISH. ? PRECISION-GROUND GUIDEWAYS WITH HARDENED SURFACE FOR LONG-TERM ACCURACY AND WEAR-RESISTANCE. ? PRELOADED BALL SCREW WITH ZERO BACKLASH FOR EASY AND PRECISE FEEDS ? SIMULTANEOUS AXIS MOVEMENT ? TURCITE-B COATED GUIDES ? SWIVELLING CONTROL PANEL, FULLY EQUIPPED WITH ALL OPERATING CONTROLS ? AUTOMATIC LUBRICATION ? SPINDLE BRAKES ? EQUIPMENT ACCORDING TO CE ? LARGE WORK AREA OF 500X2200MM AND UP TO 1200 KG TABLE LOAD CAPACITY. ? VERTICAL UNIVERSAL HEAD ROTATES 360° FOR VERSATILE CUTTING PERFORMANCE. ? HIGH SPEED VERTICAL UNIVERSAL HEAD FOR ROBUST & HEAVY CUTTING PERFORMANCE. ? SEPARATE BUTTON FOR RAPID TRAVERSE OF AXES, ASIDE AUTOMATIC FEEDING, FOR EASIER OPERATION AND LESS IDLE TIME. ? COMPULSORY LUBRICATION OF HORIZONTAL MILLING SPINDLE TRANSMISSION GEARS FOR SMOOTH RUNNING. ? MODULAR DESIGN WITH WIDE OPTIONS FOR DIVERSE NEEDS: 2-AXIS DRO UNIT, 3-AXIS DRO UNIT, TABLE GUARDS, SPINDLE GUARDS, INDEXING DIVIDING HEADS, VARIOUS CLAMPING KITS, VICES, TOOL HOLDERS, ETC.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-grinder 200 mm, all stainless steel, european bins charger.
39 kw power. perfect condition. GRINDER 200 MM, ALL STAINLESS STEEL, EUROPEAN BINS CHARGER. 39 KW POWER. PERFECT CONDITION.
Vendedor: Europ-Equipement
Año de construcción: usado
Ubicación: Land-:ll 550 | ll 750 | ll950 <br/>turning diameter:550 | 750 | 950 mm<br/>turning length:3000/4000/5000/6000/7000/8000/9000/12000/14000 mm<br/>control:siemens/fanuc/fagor <br/>center height over bed:475|575|675 mm<br/>bed width:990 mm<br/>spindle bore:153/230/305/405 mm<br/>spindle nose:a2-11/a2-15/a2-20/a2-28 <br/>spindle speed:9-600/9-500/7-400/5-250  u/min<br/>spindle taper:6 mk<br/>spindle drive:22/26 (30/37 opt.) kw<br/>tool turret:4/8/12 hydraulisch oder elektrisch <br/>tool holder -shaft diameter:32 (40 opt.) mm<br/>tailstock quill diameter:165|200 mm<br/>tailstock quill adjustment:250 mm<br/>taper in tailstock:6 mk<br/>tailstock movement:über motor <br/>travel -x axis:370 | 480  mm<br/>travel - z:= spitzenweite mm<br/>servo motor x-axis:3 | 4 kw<br/>servo motor z-axis:4 | 7  kw<br/>rapid power traverse in x-and z direction:5/4 m/min<br/>hydraulic motor:2,2 (2,9 opt.) kw<br/>coolant pump drive:3 (15 opt.) | 15 bar<br/>weight of the machine ca.:12,7/15,3/18/21,5/24/26,6 | 13,7/16,4/19/22,2/25/27,6/30,2/33 t<br/>machine length:5470/6470 /7470 /8470/9470/10470/11470/12470  mm<br/>machine width/height:3250 x 2370|3450 x 2370 mm<br/>max. workpiece weight -without tailstock:2000/2200/2400|2000/2200/2400|2200/2400/2600  kg<br/>max. workpiece weight between centres:6000/7000/8000 |6000/7000/8000 |7000/8000/9000 kg<br/>workpiece weight in steadies max.:mit einer lünette:7000/8000/9000|mit einer lünette:7000/8000/9000|mit einer lünette:8000/9000/10000 kg<br/>workpiece weight in steadies max.:mit zwei lünetten:8888/9000/10000| mit zwei lünetten: 9000/10000/11000  kg<br/>turret:8-pos (12 pos) <br/>bed all of one piece and solid cast:monoblock-ausführung mit 5 führungsbahnen <br/>motorized tailstock: <br/>chip conveyor: <br/>cnc controller:siemens/fanuc/fagor <br/>: <br/>mpg hand wheel: <br/>levellig elements: <br/>tools: <br/>: <br/>halogen lamp: <br/>: <br/>ce-certificate: <br/>c-axis: <br/>y-axis: <br/>b-axis: <br/>cnc controls from:siemens/fanuc/fagor <br/>steady rests:manuell oder hydraulisch <br/>atc: <br/>boring bar holder: <br/>linear scales: <br/><br/>   5 bed way heavy duty cnc lathe  ll series  the new model \ :LL 550 | LL 750 | LL950
TURNING DIAMETER:550 | 750 | 950 MM
TURNING LENGTH:3000/4000/5000/6000/7000/8000/9000/12000/14000 MM
CONTROL:SIEMENS/FANUC/FAGOR
CENTER HEIGHT OVER BED:475|575|675 MM
BED WIDTH:990 MM
SPINDLE BORE:153/230/305/405 MM
SPINDLE NOSE:A2-11/A2-15/A2-20/A2-28
SPINDLE SPEED:9-600/9-500/7-400/5-250 U/MIN
SPINDLE TAPER:6 MK
SPINDLE DRIVE:22/26 (30/37 OPT.) KW
TOOL TURRET:4/8/12 HYDRAULISCH ODER ELEKTRISCH
TOOL HOLDER -SHAFT DIAMETER:32 (40 OPT.) MM
TAILSTOCK QUILL DIAMETER:165|200 MM
TAILSTOCK QUILL ADJUSTMENT:250 MM
TAPER IN TAILSTOCK:6 MK
TAILSTOCK MOVEMENT:üBER MOTOR
TRAVEL -X AXIS:370 | 480 MM
TRAVEL - Z:= SPITZENWEITE MM
SERVO MOTOR X-AXIS:3 | 4 KW
SERVO MOTOR Z-AXIS:4 | 7 KW
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:5/4 M/MIN
HYDRAULIC MOTOR:2,2 (2,9 OPT.) KW
COOLANT PUMP DRIVE:3 (15 OPT.) | 15 BAR
WEIGHT OF THE MACHINE CA.:12,7/15,3/18/21,5/24/26,6 | 13,7/16,4/19/22,2/25/27,6/30,2/33 T
MACHINE LENGTH:5470/6470 /7470 /8470/9470/10470/11470/12470 MM
MACHINE WIDTH/HEIGHT:3250 X 2370|3450 X 2370 MM
MAX. WORKPIECE WEIGHT -WITHOUT TAILSTOCK:2000/2200/2400|2000/2200/2400|2200/2400/2600 KG
MAX. WORKPIECE WEIGHT BETWEEN CENTRES:6000/7000/8000 |6000/7000/8000 |7000/8000/9000 KG
WORKPIECE WEIGHT IN STEADIES MAX.:MIT EINER LüNETTE:7000/8000/9000|MIT EINER LüNETTE:7000/8000/9000|MIT EINER LüNETTE:8000/9000/10000 KG
WORKPIECE WEIGHT IN STEADIES MAX.:MIT ZWEI LüNETTEN:8888/9000/10000| MIT ZWEI LüNETTEN: 9000/10000/11000 KG
TURRET:8-POS (12 POS)
BED ALL OF ONE PIECE AND SOLID CAST:MONOBLOCK-AUSFüHRUNG MIT 5 FüHRUNGSBAHNEN
MOTORIZED TAILSTOCK:
CHIP CONVEYOR:
CNC CONTROLLER:SIEMENS/FANUC/FAGOR
:
MPG HAND WHEEL:
LEVELLIG ELEMENTS:
TOOLS:
:
HALOGEN LAMP:
:
CE-CERTIFICATE:
C-AXIS:
Y-AXIS:
B-AXIS:
CNC CONTROLS FROM:SIEMENS/FANUC/FAGOR
STEADY RESTS:MANUELL ODER HYDRAULISCH
ATC:
BORING BAR HOLDER:
LINEAR SCALES:

5 BED WAY HEAVY DUTY CNC LATHE LL SERIES THE NEW MODEL \"LL\" SERIES IS DESIGNED FOR COMBINING MORE ADVANTAGE AND EVOLUTIONARY LARGE CNC LATHES. ESPECIALLY IDEAL FOR TURNING LONG SHAFT AND HOLLOW TUBES, IT OVERCOMES THE INTERFERENCE BETWEEN CARRIAGE AND STEADY RESTS COMPLETELY. IN ORDER TO INTEGRATE THE RIGIDITY OF A FLAT BED LATHE WITH THE ADVANTAGES OF A SLANT BED LATHE, TUSCAN HAVE CREATED A BRAND NEW CONSTRUCTION : THE 5 BED WAY HEAVY DUTY CNC LATHE. THE LL SERIES INTEGRATES THE ADVANTAGES OF SUPER RIGIDITY, HIGH EFFICIENCY AND PERFECT ACCURACY, IN ONE MACHINE. MAXIMUM CUTTING DIAMETER: 950MM. BETWEEN CENTRES: 4000MM - 8000MM. BED WIDTH: 990MM. SPINDLE BORE: 153MM, 230MM, 305MM. DOUBLE CHUCK IS AVAILABLE. MILLING FUNCTION IS OPTIONAL. RIGID AS A FLAT BED LATHE AND EFFICIENT AS A SLANT BED. NO INTERFERENCE. COMPACT TO SAVE SPACE. ECONOMIC. LARGER WORKING CAPACITY.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-- cp tronic
- stream feeder
- alcolor dampening units
- mge cooling device
- autoplate
- ink roller wash-up device
- blanket wash-up device
- impr. cylinder wash-up device
- grafix alphatronic 200 powderspray
- n&p device
- perfecting 2:0 / 1:1
- only 17 mio. impr. - CP TRONIC - STREAM FEEDER - ALCOLOR DAMPENING UNITS - MGE COOLING DEVICE - AUTOPLATE - INK ROLLER WASH-UP DEVICE - BLANKET WASH-UP DEVICE - IMPR. CYLINDER WASH-UP DEVICE - GRAFIX ALPHATRONIC 200 POWDERSPRAY - N&P DEVICE - PERFECTING 2:0 / 1:1 - ONLY 17 MIO. IMPR.
Vendedor: BOZAL Graphische Maschinen GmbH
Año de construcción: usado
Ubicación: Land-x-travel:1200/1500 mm<br/>y-travel:700 mm<br/>z-travel:500 mm<br/>:500 x 1600 mm (option: 500x2000) mm<br/>max. table load:1800 kg<br/>t-slot (width-distance-quantity):5 x 18 x 80 mm<br/>spindle taper:50 iso<br/>turning speed range:(27 stufen) 30 - 2050 u/min<br/>distance spindle nose and table:25? 525 mm<br/>feeds:x/y/z: 10-1000 / 10-1000 / 5-500 mm/min<br/>rapid travel x/y/z:2200 / 2200 / 1100 mm/min<br/>power capacity:7,5 kw<br/>weight of the machine ca.:5 t<br/>machine dimensions lxwxh:2475 x 2260 x 2180 mm<br/>universal milling head:manuell schwenkbar, 360° <br/>dro: <br/>central lubrication: <br/>halogen lamp: <br/>: <br/>european electric: <br/>: <br/>ce-design: <br/>: <br/>servo motors:in allen achsen <br/>spindle protection: <br/>machine vice: <br/>round table, manual : <br/>milling and boring equipment: <br/>cnc controls from:siemens/fanuc/heidenhain <br/>semi guarding: <br/><br/>features ? servo motors drive for x, y, z three axes ? handwheel can be equipped for easy tool setting and smoothly axis moving ? robust & rugged machine body made of high grade casting assuring superb stability and long lasting life. ? fine elaborate workmanship with great care and neat appearance with perfect paint finish. ? precision-ground guideways with hardened surface for long-term accuracy and wear-resistance. ? preloaded ball screw with zero backlash for easy and precise feeds ? simultaneous axis movement ? turcite-b coated guides ? dovetail guide on x axis ? square guides on y, z axes ? swivelling control panel, fully equipped with all operating controls ? automatic lubrication ? spindle brakes ? equipment according to ce ? large work area of 500x1600mm, opt. 500x2000mm and up to 1800 kg table load capacity. ? vertical universal head rotates 360° for versatile cutting performance. ? high speed vertical universal head firmly fixed on ram for robust & heavy cutting performance. ? separate button for rapid traverse of axes, aside automatic feeding, for easier operation and less idle time. ? compulsory lubrication of horizontal milling spindle transmission gears for smooth running. ? modular design with wide options for diverse needs: 2-axis dro unit, 3-axis dro unit, table guards, spindle guards, indexing dividing heads, various clamping kits, vices, tool holders, etc. X-TRAVEL:1200/1500 MM
Y-TRAVEL:700 MM
Z-TRAVEL:500 MM
:500 X 1600 MM (OPTION: 500X2000) MM
MAX. TABLE LOAD:1800 KG
T-SLOT (WIDTH-DISTANCE-QUANTITY):5 X 18 X 80 MM
SPINDLE TAPER:50 ISO
TURNING SPEED RANGE:(27 STUFEN) 30 - 2050 U/MIN
DISTANCE SPINDLE NOSE AND TABLE:25? 525 MM
FEEDS:X/Y/Z: 10-1000 / 10-1000 / 5-500 MM/MIN
RAPID TRAVEL X/Y/Z:2200 / 2200 / 1100 MM/MIN
POWER CAPACITY:7,5 KW
WEIGHT OF THE MACHINE CA.:5 T
MACHINE DIMENSIONS LXWXH:2475 X 2260 X 2180 MM
UNIVERSAL MILLING HEAD:MANUELL SCHWENKBAR, 360°
DRO:
CENTRAL LUBRICATION:
HALOGEN LAMP:
:
EUROPEAN ELECTRIC:
:
CE-DESIGN:
:
SERVO MOTORS:IN ALLEN ACHSEN
SPINDLE PROTECTION:
MACHINE VICE:
ROUND TABLE, MANUAL :
MILLING AND BORING EQUIPMENT:
CNC CONTROLS FROM:SIEMENS/FANUC/HEIDENHAIN
SEMI GUARDING:

FEATURES ? SERVO MOTORS DRIVE FOR X, Y, Z THREE AXES ? HANDWHEEL CAN BE EQUIPPED FOR EASY TOOL SETTING AND SMOOTHLY AXIS MOVING ? ROBUST & RUGGED MACHINE BODY MADE OF HIGH GRADE CASTING ASSURING SUPERB STABILITY AND LONG LASTING LIFE. ? FINE ELABORATE WORKMANSHIP WITH GREAT CARE AND NEAT APPEARANCE WITH PERFECT PAINT FINISH. ? PRECISION-GROUND GUIDEWAYS WITH HARDENED SURFACE FOR LONG-TERM ACCURACY AND WEAR-RESISTANCE. ? PRELOADED BALL SCREW WITH ZERO BACKLASH FOR EASY AND PRECISE FEEDS ? SIMULTANEOUS AXIS MOVEMENT ? TURCITE-B COATED GUIDES ? DOVETAIL GUIDE ON X AXIS ? SQUARE GUIDES ON Y, Z AXES ? SWIVELLING CONTROL PANEL, FULLY EQUIPPED WITH ALL OPERATING CONTROLS ? AUTOMATIC LUBRICATION ? SPINDLE BRAKES ? EQUIPMENT ACCORDING TO CE ? LARGE WORK AREA OF 500X1600MM, OPT. 500X2000MM AND UP TO 1800 KG TABLE LOAD CAPACITY. ? VERTICAL UNIVERSAL HEAD ROTATES 360° FOR VERSATILE CUTTING PERFORMANCE. ? HIGH SPEED VERTICAL UNIVERSAL HEAD FIRMLY FIXED ON RAM FOR ROBUST & HEAVY CUTTING PERFORMANCE. ? SEPARATE BUTTON FOR RAPID TRAVERSE OF AXES, ASIDE AUTOMATIC FEEDING, FOR EASIER OPERATION AND LESS IDLE TIME. ? COMPULSORY LUBRICATION OF HORIZONTAL MILLING SPINDLE TRANSMISSION GEARS FOR SMOOTH RUNNING. ? MODULAR DESIGN WITH WIDE OPTIONS FOR DIVERSE NEEDS: 2-AXIS DRO UNIT, 3-AXIS DRO UNIT, TABLE GUARDS, SPINDLE GUARDS, INDEXING DIVIDING HEADS, VARIOUS CLAMPING KITS, VICES, TOOL HOLDERS, ETC.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land- max. size 450 x 270 x 40 mm 
min. size 120 x 100 x 3 mm 
speed max. 1.800 books / hour 
equipped with: 
5 clamps 
handfeeding station w. jogger 
spine preparation w. exhauster 
hotmelt spine and side glue 
integrated premelter 
gas exhauster 
coverfeeder (toploading), w. scoring 
compressor 
register and pressing station 
belt delivery 
screen operated panel  MAX. SIZE 450 X 270 X 40 MM  MIN. SIZE 120 X 100 X 3 MM  SPEED MAX. 1.800 BOOKS / HOUR  EQUIPPED WITH:  5 CLAMPS  HANDFEEDING STATION W. JOGGER  SPINE PREPARATION W. EXHAUSTER  HOTMELT SPINE AND SIDE GLUE  INTEGRATED PREMELTER  GAS EXHAUSTER  COVERFEEDER (TOPLOADING), W. SCORING  COMPRESSOR  REGISTER AND PRESSING STATION  BELT DELIVERY  SCREEN OPERATED PANEL
Vendedor: 4print
Año de construcción: usado
Ubicación: Land-grinding length:600 mm<br/>grinding width:550 mm<br/>workpiece height:600 mm<br/>surface area:1000x450 mm<br/>max. table load:250 kg<br/>spindle drive:15 ps<br/>hydraulic pump engine:1,9/3,9 ps<br/>cross feed motor:0,75 ps<br/>:1400x1900 mm<br/>grinding wheel speeds:1400 u/min<br/>total power requirement:18 kw<br/>weight of the machine ca.:4100 kg<br/><br/>used / overhauled surface grinding machine, make elb, type swb 06 va ii-k, machine no. 114461172  machine with automatic notification in all 3 axes.  machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality. wear parts replaced defective components reparariert or replaced. reassembly, compl. functional testing and internal loss. machine in absolute working condition. machine repainted. machine in perfect, produktionsbereitem state.  accessories: - electric magnetic chuck with coarse / fine pole pitch, dimensions 600x500 mm - demagnetisiereinrichtung installed in the control cabinet - manual micrometric abrichtapparat mounted above the grinding wheel - 1 piece grinding wheel - complete coolant system - setting up / leveling -. technical documentation in german  all machines are connected prior to delivery, tested and verified all of the functions.  payment: 100% before loading the machine warranty: no  fig. similar. GRINDING LENGTH:600 MM
GRINDING WIDTH:550 MM
WORKPIECE HEIGHT:600 MM
SURFACE AREA:1000X450 MM
MAX. TABLE LOAD:250 KG
SPINDLE DRIVE:15 PS
HYDRAULIC PUMP ENGINE:1,9/3,9 PS
CROSS FEED MOTOR:0,75 PS
:1400X1900 MM
GRINDING WHEEL SPEEDS:1400 U/MIN
TOTAL POWER REQUIREMENT:18 KW
WEIGHT OF THE MACHINE CA.:4100 KG

USED / OVERHAULED SURFACE GRINDING MACHINE, MAKE ELB, TYPE SWB 06 VA II-K, MACHINE NO. 114461172 MACHINE WITH AUTOMATIC NOTIFICATION IN ALL 3 AXES. MACHINE COMPLETELY DISMANTLED, CLEANED ALL THE COMPONENTS THOROUGHLY AND CHECKED FOR COMPLETE FUNCTIONALITY. WEAR PARTS REPLACED DEFECTIVE COMPONENTS REPARARIERT OR REPLACED. REASSEMBLY, COMPL. FUNCTIONAL TESTING AND INTERNAL LOSS. MACHINE IN ABSOLUTE WORKING CONDITION. MACHINE REPAINTED. MACHINE IN PERFECT, PRODUKTIONSBEREITEM STATE. ACCESSORIES: - ELECTRIC MAGNETIC CHUCK WITH COARSE / FINE POLE PITCH, DIMENSIONS 600X500 MM - DEMAGNETISIEREINRICHTUNG INSTALLED IN THE CONTROL CABINET - MANUAL MICROMETRIC ABRICHTAPPARAT MOUNTED ABOVE THE GRINDING WHEEL - 1 PIECE GRINDING WHEEL - COMPLETE COOLANT SYSTEM - SETTING UP / LEVELING -. TECHNICAL DOCUMENTATION IN GERMAN ALL MACHINES ARE CONNECTED PRIOR TO DELIVERY, TESTED AND VERIFIED ALL OF THE FUNCTIONS. PAYMENT: 100% BEFORE LOADING THE MACHINE WARRANTY: NO FIG. SIMILAR.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 12.500 €
Ubicación: Land--thermal ctp screen platerite ptr 8100 year 2003 
-9.500 hours laser exposure time, external drum, 16 laserdiodes 
-min.size 450 x 370 mms., max size 1.160x940 mms. 
-speed: 8 plates/ hour at 2.400 dpi 
-standard loading mode -complete with trueflow ver. 5.01, dongle and windows-pc 
-perfectly maintained, in production now
-available in may 2019
 -THERMAL CTP SCREEN PLATERITE PTR 8100 YEAR 2003 -9.500 HOURS LASER EXPOSURE TIME, EXTERNAL DRUM, 16 LASERDIODES -MIN.SIZE 450 X 370 MMS., MAX SIZE 1.160X940 MMS. -SPEED: 8 PLATES/ HOUR AT 2.400 DPI -STANDARD LOADING MODE -COMPLETE WITH TRUEFLOW VER. 5.01, DONGLE AND WINDOWS-PC -PERFECTLY MAINTAINED, IN PRODUCTION NOW -AVAILABLE IN MAY 2019
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Ubicación: Land-:ll-1250 | ll-1450 | ll-1650 <br/>turning diameter:1250 | 1450 | 1650 mm<br/>turning length:5000/6000/7000/8000/9000/12000/14000/16000 mm<br/>control:siemens/fanuc/fagor <br/>center height over bed:705|805|905 mm<br/>width of cross cariage:600 mm<br/>bed width:1370 mm<br/>spindle bore:200 mm<br/>spindle nose:a2-15/a2-15/a2-20/a2-28 <br/>spindle speed:4-400  u/min<br/>spindle taper:6 mk<br/>spindle drive:22/26 (30/37 opt.) kw<br/>tool turret:4/8/12 hydraulisch oder elektrisch <br/>tool holder -shaft diameter:40 mm<br/>tailstock quill diameter:300 mm<br/>tailstock quill adjustment:250 mm<br/>taper in tailstock:7 mk<br/>tailstock movement:über motor (zahnstangenantrieb) <br/>travel -x axis:755 mm<br/>travel - z:= spitzenweite mm<br/>servo motor x-axis:4 kw<br/>servo motor z-axis:7 kw<br/>rapid power traverse in x-and z direction:5 m/min<br/>hydraulic motor:1,4 (ab 9m: 3,6) kw<br/>coolant pump drive:15 bar<br/>weight of the machine ca.:auf anfrage <br/>machine length:15150/16150/17150/18150/19150/20150 mm<br/>machine width/height:auf anfrage <br/>max. workpiece weight -without tailstock:2000/2200/2400|2000/2200/2400|2200/2400/2600  kg<br/>max. workpiece weight between centres:6000/7000/8000 |6000/7000/8000 |7000/8000/9000 kg<br/>workpiece weight in steadies max.:mit einer lünette:7000/8000/9000|mit einer lünette:7000/8000/9000|mit einer lünette:8000/9000/10000 kg<br/>workpiece weight in steadies max.:mit zwei lünetten:8888/9000/10000| mit zwei lünetten: 9000/10000/11000  kg<br/>turret:4-pos (12 pos) <br/>bed all of one piece and solid cast:monoblock-ausführung mit 5 führungsbahnen <br/>motorized tailstock: <br/>chip conveyor: <br/>cnc controller:siemens/fanuc/fagor <br/>:2 türen vorne und hinten durchgehende wand <br/>mpg hand wheel: <br/>levellig elements: <br/>tools: <br/>: <br/>halogen lamp: <br/>: <br/>ce-certificate: <br/>c-axis: <br/>y-axis: <br/>b-axis: <br/>cnc controls from:siemens/fanuc/fagor <br/>steady rests:manuell oder hydraulisch <br/>atc: <br/>boring bar holder: <br/>linear scales: <br/><br/>   5 bed way heavy duty cnc lathe  ll series  the new model \ :LL-1250 | LL-1450 | LL-1650
TURNING DIAMETER:1250 | 1450 | 1650 MM
TURNING LENGTH:5000/6000/7000/8000/9000/12000/14000/16000 MM
CONTROL:SIEMENS/FANUC/FAGOR
CENTER HEIGHT OVER BED:705|805|905 MM
WIDTH OF CROSS CARIAGE:600 MM
BED WIDTH:1370 MM
SPINDLE BORE:200 MM
SPINDLE NOSE:A2-15/A2-15/A2-20/A2-28
SPINDLE SPEED:4-400 U/MIN
SPINDLE TAPER:6 MK
SPINDLE DRIVE:22/26 (30/37 OPT.) KW
TOOL TURRET:4/8/12 HYDRAULISCH ODER ELEKTRISCH
TOOL HOLDER -SHAFT DIAMETER:40 MM
TAILSTOCK QUILL DIAMETER:300 MM
TAILSTOCK QUILL ADJUSTMENT:250 MM
TAPER IN TAILSTOCK:7 MK
TAILSTOCK MOVEMENT:üBER MOTOR (ZAHNSTANGENANTRIEB)
TRAVEL -X AXIS:755 MM
TRAVEL - Z:= SPITZENWEITE MM
SERVO MOTOR X-AXIS:4 KW
SERVO MOTOR Z-AXIS:7 KW
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:5 M/MIN
HYDRAULIC MOTOR:1,4 (AB 9M: 3,6) KW
COOLANT PUMP DRIVE:15 BAR
WEIGHT OF THE MACHINE CA.:AUF ANFRAGE
MACHINE LENGTH:15150/16150/17150/18150/19150/20150 MM
MACHINE WIDTH/HEIGHT:AUF ANFRAGE
MAX. WORKPIECE WEIGHT -WITHOUT TAILSTOCK:2000/2200/2400|2000/2200/2400|2200/2400/2600 KG
MAX. WORKPIECE WEIGHT BETWEEN CENTRES:6000/7000/8000 |6000/7000/8000 |7000/8000/9000 KG
WORKPIECE WEIGHT IN STEADIES MAX.:MIT EINER LüNETTE:7000/8000/9000|MIT EINER LüNETTE:7000/8000/9000|MIT EINER LüNETTE:8000/9000/10000 KG
WORKPIECE WEIGHT IN STEADIES MAX.:MIT ZWEI LüNETTEN:8888/9000/10000| MIT ZWEI LüNETTEN: 9000/10000/11000 KG
TURRET:4-POS (12 POS)
BED ALL OF ONE PIECE AND SOLID CAST:MONOBLOCK-AUSFüHRUNG MIT 5 FüHRUNGSBAHNEN
MOTORIZED TAILSTOCK:
CHIP CONVEYOR:
CNC CONTROLLER:SIEMENS/FANUC/FAGOR
:2 TüREN VORNE UND HINTEN DURCHGEHENDE WAND
MPG HAND WHEEL:
LEVELLIG ELEMENTS:
TOOLS:
:
HALOGEN LAMP:
:
CE-CERTIFICATE:
C-AXIS:
Y-AXIS:
B-AXIS:
CNC CONTROLS FROM:SIEMENS/FANUC/FAGOR
STEADY RESTS:MANUELL ODER HYDRAULISCH
ATC:
BORING BAR HOLDER:
LINEAR SCALES:

5 BED WAY HEAVY DUTY CNC LATHE LL SERIES THE NEW MODEL \"LL\" SERIES IS DESIGNED FOR COMBINING MORE ADVANTAGE AND EVOLUTIONARY LARGE CNC LATHES. ESPECIALLY IDEAL FOR TURNING LONG SHAFT AND HOLLOW TUBES, IT OVERCOMES THE INTERFERENCE BETWEEN CARRIAGE AND STEADY RESTS COMPLETELY. IN ORDER TO INTEGRATE THE RIGIDITY OF A FLAT BED LATHE WITH THE ADVANTAGES OF A SLANT BED LATHE, TUSCAN HAVE CREATED A BRAND NEW CONSTRUCTION : THE 5 BED WAY HEAVY DUTY CNC LATHE. THE LL SERIES INTEGRATES THE ADVANTAGES OF SUPER RIGIDITY, HIGH EFFICIENCY AND PERFECT ACCURACY, IN ONE MACHINE. DOUBLE CHUCK IS AVAILABLE. MILLING AND BORING FUNCTION IS OPTIONAL, ALSO SIMOULTANOUSLY. RIGID AS A FLAT BED LATHE AND EFFICIENT AS A SLANT BED. NO INTERFERENCE. COMPACT TO SAVE SPACE. ECONOMIC. LARGER WORKING CAPACITY.
Vendedor: GK Werkzeugmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more PERFECT types: