88 ofertas

Año de construcción: usado
Ubicación: Land-operating hours: 7430 h	
control system:	
siemens sinumerik system 3	
cutter diameter: 163 mm	
milling width: 230 mm	
speed: 120-140 / min	
axial feed: 1-1000 mm / min	
radial feed: 1-600 mm / min	
center distance milling and clamping spindle: 40-265 mm	
adjustability: 170 mm	
swivel range for milling carriage: 90 ° max.	
machine dimensions:	
5260 x 4025 x 2580 mm	
machine weight: 10000 kg	
accessories:	
bending mandrel	
2 milling cabinets	
and another accessories   OPERATING HOURS: 7430 H CONTROL SYSTEM: SIEMENS SINUMERIK SYSTEM 3 CUTTER DIAMETER: 163 MM MILLING WIDTH: 230 MM SPEED: 120-140 / MIN AXIAL FEED: 1-1000 MM / MIN RADIAL FEED: 1-600 MM / MIN CENTER DISTANCE MILLING AND CLAMPING SPINDLE: 40-265 MM ADJUSTABILITY: 170 MM SWIVEL RANGE FOR MILLING CARRIAGE: 90 ° MAX. MACHINE DIMENSIONS: 5260 X 4025 X 2580 MM MACHINE WEIGHT: 10000 KG ACCESSORIES: BENDING MANDREL 2 MILLING CABINETS AND ANOTHER ACCESSORIES
Vendedor: AMARON s.r.o.
Año de construcción: usado
Precio: used machinery auction RESALE 3.000 €
Ubicación: Land-weight approx.: 2400 kg<br/>dimensions (l x w x h) approx.: 1500 x 2000 x 2200 mm<br/>description: maximum diameter 4. maximum diameter 160 mm. cutting length 180 mm. minimum number of teeth  to be cut 6. hobbing cutter that can be placed: diameter and length 90-100 mm. minimum/maximum distance between axel cutter and work piece 10-30 mm. diameter of spindle hole 75 mm. cutter speed 160-500 rpm WEIGHT APPROX.: 2400 KG
DIMENSIONS (L X W X H) APPROX.: 1500 X 2000 X 2200 MM
DESCRIPTION: MAXIMUM DIAMETER 4. MAXIMUM DIAMETER 160 MM. CUTTING LENGTH 180 MM. MINIMUM NUMBER OF TEETH TO BE CUT 6. HOBBING CUTTER THAT CAN BE PLACED: DIAMETER AND LENGTH 90-100 MM. MINIMUM/MAXIMUM DISTANCE BETWEEN AXEL CUTTER AND WORK PIECE 10-30 MM. DIAMETER OF SPINDLE HOLE 75 MM. CUTTER SPEED 160-500 RPM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical details:
-max. wheel diameter: 250 mm
-gear width:	160 mm
-max. module:	3,5
-table diameter:	150 mm
-table bore :	mk 3
-total weight of machine:	1 t
-total power requirement:	1,4 kw
-dimensions of machine:	1.455 x 680 x 1.620 mm 

available set of change gears TECHNICAL DETAILS: -MAX. WHEEL DIAMETER: 250 MM -GEAR WIDTH: 160 MM -MAX. MODULE: 3,5 -TABLE DIAMETER: 150 MM -TABLE BORE : MK 3 -TOTAL WEIGHT OF MACHINE: 1 T -TOTAL POWER REQUIREMENT: 1,4 KW -DIMENSIONS OF MACHINE: 1.455 X 680 X 1.620 MM AVAILABLE SET OF CHANGE GEARS
Vendedor: ALM Trade Sro
Año de construcción: usado
Precio: used machinery auction RESALE 1.000 €
Ubicación: Land-weight approx.: 9000 kg<br/>dimensions (l x w x h) approx.: 4000 x 1900 x 2250 mm<br/>description: maximum diameter 900 mm. maximum module 10. maximum face width 515 mm WEIGHT APPROX.: 9000 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 1900 X 2250 MM
DESCRIPTION: MAXIMUM DIAMETER 900 MM. MAXIMUM MODULE 10. MAXIMUM FACE WIDTH 515 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-gleason pfauter pe 500 cnc hobbing machine
operation hours 29532 

cnc control

larger repairs:

in september 2015 there were problems with the a-axis. a-axis sporadically increased with standstill monitoring. then the drive module of the a-axis was replaced.
in 2013, the cooling unit was replaced.
in 2012, the pressure vessel was swapped according to betrsichv.
technical data:

max. wheel diameter 500mm
gear width 400mm
max. module 12.
diameter of hob 192mm.
max. cutter length 250mm
milling slide travel 200mm
shifting 200mm
milling spindle speed 40-450 rpm
axial feed 1-1500 mm/min
radial feed 1-1500 mm/min
table diameter 450mm
dimensions 5240 x 4350 x 3220mm. GLEASON PFAUTER PE 500 CNC HOBBING MACHINE OPERATION HOURS 29532 CNC CONTROL LARGER REPAIRS: IN SEPTEMBER 2015 THERE WERE PROBLEMS WITH THE A-AXIS. A-AXIS SPORADICALLY INCREASED WITH STANDSTILL MONITORING. THEN THE DRIVE MODULE OF THE A-AXIS WAS REPLACED. IN 2013, THE COOLING UNIT WAS REPLACED. IN 2012, THE PRESSURE VESSEL WAS SWAPPED ACCORDING TO BETRSICHV. TECHNICAL DATA: MAX. WHEEL DIAMETER 500MM GEAR WIDTH 400MM MAX. MODULE 12. DIAMETER OF HOB 192MM. MAX. CUTTER LENGTH 250MM MILLING SLIDE TRAVEL 200MM SHIFTING 200MM MILLING SPINDLE SPEED 40-450 RPM AXIAL FEED 1-1500 MM/MIN RADIAL FEED 1-1500 MM/MIN TABLE DIAMETER 450MM DIMENSIONS 5240 X 4350 X 3220MM.
Vendedor: Asset-Trade - Bewertung & Vermarktung
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 400 mm<br/>max. module: 6 mm<br/>max. length of teeth cutting: 290 mm<br/>control: conventional <br/>min. number of teeth: 6 <br/>diameter milling arbor: max. 40 mm<br/>max. milling cutter diameter: 160 mm<br/>distance of shafts: 30 - 300 mm<br/>tool taper: mk 3 / (mk 4) <br/>work table::  <br/>table diameter: 400 mm<br/>boring diameter: 80 mm<br/>max. table load: - kg<br/>feeds::  <br/>turning speeds:  <br/>speeds of tool: 80 - 500 1/min<br/>total power requirement: 17 kva<br/>weight of the machine ca.: 6,2 t<br/>dimensions of the machine ca.: 5,5 x 3,5x 2,4 m<br/>documents:  <br/>change-gears:  <br/>milling cutter: 22, 27, 32 mm <br/>swarf management system:  <br/>coolantsystem:  <br/>gear hobbing machine<br/>pfauter - p 400 <br/><br/>- machine has been overhauld in 1989, original yom is 1970<br/><br/><br/><br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 400 MM
MAX. MODULE: 6 MM
MAX. LENGTH OF TEETH CUTTING: 290 MM
CONTROL: CONVENTIONAL
MIN. NUMBER OF TEETH: 6
DIAMETER MILLING ARBOR: MAX. 40 MM
MAX. MILLING CUTTER DIAMETER: 160 MM
DISTANCE OF SHAFTS: 30 - 300 MM
TOOL TAPER: MK 3 / (MK 4)
WORK TABLE::
TABLE DIAMETER: 400 MM
BORING DIAMETER: 80 MM
MAX. TABLE LOAD: - KG
FEEDS::
TURNING SPEEDS:
SPEEDS OF TOOL: 80 - 500 1/MIN
TOTAL POWER REQUIREMENT: 17 KVA
WEIGHT OF THE MACHINE CA.: 6,2 T
DIMENSIONS OF THE MACHINE CA.: 5,5 X 3,5X 2,4 M
DOCUMENTS:
CHANGE-GEARS:
MILLING CUTTER: 22, 27, 32 MM
SWARF MANAGEMENT SYSTEM:
COOLANTSYSTEM:
GEAR HOBBING MACHINE
PFAUTER - P 400

- MACHINE HAS BEEN OVERHAULD IN 1989, ORIGINAL YOM IS 1970







Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-good condition , complete
machine suitable for retrofit  GOOD CONDITION , COMPLETE MACHINE SUITABLE FOR RETROFIT
Vendedor: Bips Infotech GmbH
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 900 mm<br/>gear width: 500 mm<br/>max. module: 1 <br/>min. module: 10 <br/>total power requirement: 16 kw<br/>weight of the machine ca.: 8.500 kg<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 900 MM
GEAR WIDTH: 500 MM
MAX. MODULE: 1
MIN. MODULE: 10
TOTAL POWER REQUIREMENT: 16 KW
WEIGHT OF THE MACHINE CA.: 8.500 KG
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-horizontal gear hobbing machine pfauter r 00 - 20-13-011 delivery time: immediate number: 20-13-011 manufacturer: pfauter type: r 00
 
machine data year: ca. 1946 l x w x h: approx. 1700 x 1100 x 1800 mm weight: approximately 950 kg

good general condition specifications of maximum workpiece ã?: approx. ã? 400 mm max wheel width: approx. 200 mm min. module: approx. 0.5 max module: approx. 3.5 table bore: ã? 55 mm distance cutters - workpiece: approx. 15-155 mm speed range: approx. 140-450 rpm max cutter ã?: approx. ã? 80 mm helix angle: 10 / 30 & 45 degrees-smallest number of teeth: 4 piece table - diameter: approx. ã? 150 mm power: approx. 3,2 kw accessories â?¢ tangential trimmer â?¢ coolant system â?¢ various change gears

accessories on request price and other specifications on request HORIZONTAL GEAR HOBBING MACHINE PFAUTER R 00 - 20-13-011 DELIVERY TIME: IMMEDIATE NUMBER: 20-13-011 MANUFACTURER: PFAUTER TYPE: R 00 MACHINE DATA YEAR: CA. 1946 L X W X H: APPROX. 1700 X 1100 X 1800 MM WEIGHT: APPROXIMATELY 950 KG GOOD GENERAL CONDITION SPECIFICATIONS OF MAXIMUM WORKPIECE &ATILDE;?: APPROX. &ATILDE;? 400 MM MAX WHEEL WIDTH: APPROX. 200 MM MIN. MODULE: APPROX. 0.5 MAX MODULE: APPROX. 3.5 TABLE BORE: &ATILDE;? 55 MM DISTANCE CUTTERS - WORKPIECE: APPROX. 15-155 MM SPEED RANGE: APPROX. 140-450 RPM MAX CUTTER &ATILDE;?: APPROX. &ATILDE;? 80 MM HELIX ANGLE: 10 / 30 & 45 DEGREES-SMALLEST NUMBER OF TEETH: 4 PIECE TABLE - DIAMETER: APPROX. &ATILDE;? 150 MM POWER: APPROX. 3,2 KW ACCESSORIES &ACIRC;?&CENT; TANGENTIAL TRIMMER &ACIRC;?&CENT; COOLANT SYSTEM &ACIRC;?&CENT; VARIOUS CHANGE GEARS ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 250 mm<br/>max. module: 5 <br/>radial slide travel: 210 mm<br/>tangential travel max.: 200 mm<br/>axial travel: 200 mm<br/>control: sinumerik 840 c <br/>table diameter: 300 mm<br/>table hole: 80 mm<br/>taper: sk 40 <br/>diameter of milling arbor: 32 mm<br/>speeds of tool: 90 - 900 u/min<br/>feeds x/y/z: 5000 mm/min<br/>total power requirement: 52 kw<br/>weight of the machine ca.: 9,50 t<br/>dimensions of the machine ca.: 6,720 x 5,975 x 3,998 m<br/>with workpiece loading gantry & workpiece magazine with 48 slots<br/>spur-, helical-, cylindrical gearing<br/>worm wheels                                   <br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 250 MM
MAX. MODULE: 5
RADIAL SLIDE TRAVEL: 210 MM
TANGENTIAL TRAVEL MAX.: 200 MM
AXIAL TRAVEL: 200 MM
CONTROL: SINUMERIK 840 C
TABLE DIAMETER: 300 MM
TABLE HOLE: 80 MM
TAPER: SK 40
DIAMETER OF MILLING ARBOR: 32 MM
SPEEDS OF TOOL: 90 - 900 U/MIN
FEEDS X/Y/Z: 5000 MM/MIN
TOTAL POWER REQUIREMENT: 52 KW
WEIGHT OF THE MACHINE CA.: 9,50 T
DIMENSIONS OF THE MACHINE CA.: 6,720 X 5,975 X 3,998 M
WITH WORKPIECE LOADING GANTRY & WORKPIECE MAGAZINE WITH 48 SLOTS
SPUR-, HELICAL-, CYLINDRICAL GEARING
WORM WHEELS




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-horizontal gear hobbing machine pfauter rs 00 - 20-13-009 delivery time: immediate number: 20-13-009 manufacturer: pfauter type: rs 00
 
machine data year: approx. 1975 l x w x h: approx. 1700 x 1100 x 1800 mm weight: approximately 950 kg

good general condition specifications of maximum workpiece ã?: approx. ã? 250 mm max wheel width: approx. 160 mm min. module: approx. 0.5 max module: approx. 3.5 table bore: ã? 55 mm distance cutters - workpiece: approx. 15-155 mm speed range: approx. 140-450 rpm max cutter ã?: approx. ã? 80 mm helix angle: 10 / 30 & 45 degrees-smallest number of teeth: 4 piece table - diameter: approx. ã? 150 mm

power: approx. 3,2 kw accessories â?¢ operating instructions â?¢ coolant system â?¢ various change gears
accessories on request price and other specifications on request â?¢ various change gears HORIZONTAL GEAR HOBBING MACHINE PFAUTER RS 00 - 20-13-009 DELIVERY TIME: IMMEDIATE NUMBER: 20-13-009 MANUFACTURER: PFAUTER TYPE: RS 00 MACHINE DATA YEAR: APPROX. 1975 L X W X H: APPROX. 1700 X 1100 X 1800 MM WEIGHT: APPROXIMATELY 950 KG GOOD GENERAL CONDITION SPECIFICATIONS OF MAXIMUM WORKPIECE &ATILDE;?: APPROX. &ATILDE;? 250 MM MAX WHEEL WIDTH: APPROX. 160 MM MIN. MODULE: APPROX. 0.5 MAX MODULE: APPROX. 3.5 TABLE BORE: &ATILDE;? 55 MM DISTANCE CUTTERS - WORKPIECE: APPROX. 15-155 MM SPEED RANGE: APPROX. 140-450 RPM MAX CUTTER &ATILDE;?: APPROX. &ATILDE;? 80 MM HELIX ANGLE: 10 / 30 & 45 DEGREES-SMALLEST NUMBER OF TEETH: 4 PIECE TABLE - DIAMETER: APPROX. &ATILDE;? 150 MM POWER: APPROX. 3,2 KW ACCESSORIES &ACIRC;?&CENT; OPERATING INSTRUCTIONS &ACIRC;?&CENT; COOLANT SYSTEM &ACIRC;?&CENT; VARIOUS CHANGE GEARS ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST &ACIRC;?&CENT; VARIOUS CHANGE GEARS
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-workpiece dia.: 110 mm<br/>max. module: 10 <br/>min. module: 0,5 <br/>control: bosch cc 300 m <br/>clamping length: 1000 mm<br/>swing diameter: 240 mm<br/>hobbing length: 400 mm<br/>total power requirement: 40 kw<br/>weight of the machine ca.: 7 t<br/>dimensions of the machine ca.: 4,5x4,3,2,3 m<br/><br/><br/><br/><br/> WORKPIECE DIA.: 110 MM
MAX. MODULE: 10
MIN. MODULE: 0,5
CONTROL: BOSCH CC 300 M
CLAMPING LENGTH: 1000 MM
SWING DIAMETER: 240 MM
HOBBING LENGTH: 400 MM
TOTAL POWER REQUIREMENT: 40 KW
WEIGHT OF THE MACHINE CA.: 7 T
DIMENSIONS OF THE MACHINE CA.: 4,5X4,3,2,3 M




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-horizontal gear hobbing machine pfauter rs 1 - 20-13-008 delivery time: immediate number: 20-13-008 manufacturer: pfauter type: rs 1
 
machine data year: ca. 1917 l x w x h: approx. 1400 x 1200 x 1800 mm weight: 800 kg

very good condition specifications of maximum work piece ã?: approx. ã? 500 mm

max wheel width: approx. 200 mm min. module: approx. 0.5 max module: approx. 4 table hole: dia. 60 mm table - diameter: approx. ã? 420 mm

propulsion power: kw approx. 0 accessories â?¢ various hobbing cutter â?¢ various dollies â?¢ various change gears â?¢ operating instructions â?¢ tangential - trimmer â?¢ coolant system accessories on request price and other specifications on request HORIZONTAL GEAR HOBBING MACHINE PFAUTER RS 1 - 20-13-008 DELIVERY TIME: IMMEDIATE NUMBER: 20-13-008 MANUFACTURER: PFAUTER TYPE: RS 1 MACHINE DATA YEAR: CA. 1917 L X W X H: APPROX. 1400 X 1200 X 1800 MM WEIGHT: 800 KG VERY GOOD CONDITION SPECIFICATIONS OF MAXIMUM WORK PIECE &ATILDE;?: APPROX. &ATILDE;? 500 MM MAX WHEEL WIDTH: APPROX. 200 MM MIN. MODULE: APPROX. 0.5 MAX MODULE: APPROX. 4 TABLE HOLE: DIA. 60 MM TABLE - DIAMETER: APPROX. &ATILDE;? 420 MM PROPULSION POWER: KW APPROX. 0 ACCESSORIES &ACIRC;?&CENT; VARIOUS HOBBING CUTTER &ACIRC;?&CENT; VARIOUS DOLLIES &ACIRC;?&CENT; VARIOUS CHANGE GEARS &ACIRC;?&CENT; OPERATING INSTRUCTIONS &ACIRC;?&CENT; TANGENTIAL - TRIMMER &ACIRC;?&CENT; COOLANT SYSTEM ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 900 mm<br/>max. module: 8 mm<br/>max. length of teeth cutting: 498 mm<br/>control: conventional <br/>min. number of teeth: 4 / 8 <br/>diameter milling arbor: max. 60 mm<br/>max. milling cutter diameter: 195 mm<br/>distance of shafts: 50 - 550 mm<br/>tool taper: mk 5 <br/>work table::  <br/>table diameter: 700 mm<br/>boring diameter: 100 mm<br/>max. table load: - kg<br/>feeds::  <br/>turning speeds:  <br/>speeds of tool: 62 - 390 1/min<br/>total power requirement: 16 kw<br/>weight of the machine ca.: 7,8 t<br/>dimensions of the machine ca.: 6,0 x 4,0 x 2,5 m<br/>documents:  <br/>gear hobbing machine<br/>pfauter - p 900 <br/><br/>- well equiped<br/><br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 900 MM
MAX. MODULE: 8 MM
MAX. LENGTH OF TEETH CUTTING: 498 MM
CONTROL: CONVENTIONAL
MIN. NUMBER OF TEETH: 4 / 8
DIAMETER MILLING ARBOR: MAX. 60 MM
MAX. MILLING CUTTER DIAMETER: 195 MM
DISTANCE OF SHAFTS: 50 - 550 MM
TOOL TAPER: MK 5
WORK TABLE::
TABLE DIAMETER: 700 MM
BORING DIAMETER: 100 MM
MAX. TABLE LOAD: - KG
FEEDS::
TURNING SPEEDS:
SPEEDS OF TOOL: 62 - 390 1/MIN
TOTAL POWER REQUIREMENT: 16 KW
WEIGHT OF THE MACHINE CA.: 7,8 T
DIMENSIONS OF THE MACHINE CA.: 6,0 X 4,0 X 2,5 M
DOCUMENTS:
GEAR HOBBING MACHINE
PFAUTER - P 900

- WELL EQUIPED





Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-module max.: 10
maximum diameter: Ø 900 mm.
height 500 mm. length:
power: 21 ps.
weight: 8500 kg.
dimensions: 2900 x 1700 x 2150 mm.
accessories:
gear set MODULE MAX.: 10 MAXIMUM DIAMETER: Ø 900 MM. HEIGHT 500 MM. LENGTH: POWER: 21 PS. WEIGHT: 8500 KG. DIMENSIONS: 2900 X 1700 X 2150 MM. ACCESSORIES: GEAR SET
Vendedor: B.M. MACCHINE UTENSILI srl
Año de construcción: usado
Ubicación: Land-max. wheel diameter:250 mm<br/>gear width:160 mm<br/>max. module:4 <br/>min. module:0,5 <br/>table diameter:150 mm<br/>total power requirement:2 kw<br/>dimensions of the machine ca.:1600 x 1000 x 1600 mm<br/>weight of the machine ca.:1,1 t<br/><br/> MAX. WHEEL DIAMETER:250 MM
GEAR WIDTH:160 MM
MAX. MODULE:4
MIN. MODULE:0,5
TABLE DIAMETER:150 MM
TOTAL POWER REQUIREMENT:2 KW
DIMENSIONS OF THE MACHINE CA.:1600 X 1000 X 1600 MM
WEIGHT OF THE MACHINE CA.:1,1 T

Vendedor: SALING Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-milling head diameter: 163mm, milling width: 230mm, rotational speed: 120-140/min, axial feed rate: 1-1000mm/min, radial feed: 1-600mm/min, milling and clamping spindle distance: 40-265mm, adjustment: 170mm, milling sledge adjustment: 90° max., control: sinumerik 3m-b, length: 5260mm, width: 4025mm, height: 2580mm, weight: 10t, including accessories.  MILLING HEAD DIAMETER: 163MM, MILLING WIDTH: 230MM, ROTATIONAL SPEED: 120-140/MIN, AXIAL FEED RATE: 1-1000MM/MIN, RADIAL FEED: 1-600MM/MIN, MILLING AND CLAMPING SPINDLE DISTANCE: 40-265MM, ADJUSTMENT: 170MM, MILLING SLEDGE ADJUSTMENT: 90° MAX., CONTROL: SINUMERIK 3M-B, LENGTH: 5260MM, WIDTH: 4025MM, HEIGHT: 2580MM, WEIGHT: 10T, INCLUDING ACCESSORIES.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 900 mm<br/>gear width: 450 mm<br/>max. module: 10 <br/>total power requirement:  kw<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 900 MM
GEAR WIDTH: 450 MM
MAX. MODULE: 10
TOTAL POWER REQUIREMENT: KW




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-pitch cycle diameter: 180mm max., tool width: 52mm, workpiece diameter: 280mm, module: 5mm max., stroke: 60mm, number of strokes: 125-1250/min, spindle table distance: 335mm, number of teeth: 200, length: 4500mm, width: 2500mm, height: 2700mm, weight: 7.5t, was overhauled in 2001, including various milling heads pfauter and gleason.  PITCH CYCLE DIAMETER: 180MM MAX., TOOL WIDTH: 52MM, WORKPIECE DIAMETER: 280MM, MODULE: 5MM MAX., STROKE: 60MM, NUMBER OF STROKES: 125-1250/MIN, SPINDLE TABLE DISTANCE: 335MM, NUMBER OF TEETH: 200, LENGTH: 4500MM, WIDTH: 2500MM, HEIGHT: 2700MM, WEIGHT: 7.5T, WAS OVERHAULED IN 2001, INCLUDING VARIOUS MILLING HEADS PFAUTER AND GLEASON.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 160 mm<br/>gear width: 50 mm<br/>max. module: 4 <br/>min. module:  <br/>total power requirement: 30 kw<br/>weight of the machine ca.: 8.500 kg<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 160 MM
GEAR WIDTH: 50 MM
MAX. MODULE: 4
MIN. MODULE:
TOTAL POWER REQUIREMENT: 30 KW
WEIGHT OF THE MACHINE CA.: 8.500 KG
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-
Vendedor: K & C Machinery Limited
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 600 mm<br/>gear width: 600 mm<br/>profile depth: 35 mm<br/>pivoting angle: +/- 45 grad<br/>grinding wheel speeds: 600-6000 u/min<br/>dimensions of the machine ca.: 5,1 x 6,5 x 3,7 m<br/>weight: 17 t<br/>feeds x-axis: 10000 mm/min<br/>feeds y-axis: 5000 mm/min<br/>feeds z-axis: 10000 mm/min<br/>table turning speeds: 0 - 14 u/min<br/><br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 600 MM
GEAR WIDTH: 600 MM
PROFILE DEPTH: 35 MM
PIVOTING ANGLE: +/- 45 GRAD
GRINDING WHEEL SPEEDS: 600-6000 U/MIN
DIMENSIONS OF THE MACHINE CA.: 5,1 X 6,5 X 3,7 M
WEIGHT: 17 T
FEEDS X-AXIS: 10000 MM/MIN
FEEDS Y-AXIS: 5000 MM/MIN
FEEDS Z-AXIS: 10000 MM/MIN
TABLE TURNING SPEEDS: 0 - 14 U/MIN





Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-wheel diameter: 250mm max., gear width: 160mm, power: 22kw, length: 1500mm, width: 1000mm, height: 1600mm, weight: 1.08t.  WHEEL DIAMETER: 250MM MAX., GEAR WIDTH: 160MM, POWER: 22KW, LENGTH: 1500MM, WIDTH: 1000MM, HEIGHT: 1600MM, WEIGHT: 1.08T.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-power capacity: 0 kw<br/>tool adaptor: 0 <br/>total power requirement: 0 kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> POWER CAPACITY: 0 KW
TOOL ADAPTOR: 0
TOTAL POWER REQUIREMENT: 0 KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: SK Maschinen-Service GmbH
Año de construcción: usado
Ubicación: Land-max. diameter: 80mm, max. gear module: 1.  MAX. DIAMETER: 80MM, MAX. GEAR MODULE: 1.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 900 mm<br/>gear width: 380 mm<br/>max. module: 10 <br/>min. module: 1 <br/>:  <br/>total power requirement: 17 kw<br/>weight of the machine ca.: 7,5 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 900 MM
GEAR WIDTH: 380 MM
MAX. MODULE: 10
MIN. MODULE: 1
:
TOTAL POWER REQUIREMENT: 17 KW
WEIGHT OF THE MACHINE CA.: 7,5 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-general characteristics  
Ø max. gear  200 mm  
module  6  
hobbing length  155 mm  
cone milling spindle  morse 5  
cutter module  4  
maximum Ø cutter  200 mm  
strokes / min, min / max cutter  500-1000 golpes/min  
table features  
Ø table  240 mm  
electrical characteristics  
total power  32,5 kva  
voltage  220/380v  
dimensions and weights  
high  2,765 mm  
long  6,770 mm  
weight  9,600 kg  
width  3,575 mm  
other features  
included accessories  con cargador  
no. manufacturing  25418  
year  1978  
 GENERAL CHARACTERISTICS Ø MAX. GEAR 200 MM MODULE 6 HOBBING LENGTH 155 MM CONE MILLING SPINDLE MORSE 5 CUTTER MODULE 4 MAXIMUM Ø CUTTER 200 MM STROKES / MIN, MIN / MAX CUTTER 500-1000 GOLPES/MIN TABLE FEATURES Ø TABLE 240 MM ELECTRICAL CHARACTERISTICS TOTAL POWER 32,5 KVA VOLTAGE 220/380V DIMENSIONS AND WEIGHTS HIGH 2,765 MM LONG 6,770 MM WEIGHT 9,600 KG WIDTH 3,575 MM OTHER FEATURES INCLUDED ACCESSORIES CON CARGADOR NO. MANUFACTURING 25418 YEAR 1978
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-workpiece dia.: 110 mm<br/>max. module: 10 <br/>min. module:  <br/>swing diameter: 240 mm<br/>table rpm: 0,25-20 u/min.<br/>table hole: 63 mm<br/>axial travel: 400 mm<br/>toolpiece turning speed range: 50 - 200 u/min<br/>tool diameter: 255 mm<br/>tool length - max.: 50 mm<br/>milling arbors: iso 40 (50 mm) <br/>rapid travel range: 3 m/min<br/>control: bosch cc 300 m <br/>max. workpiece diameter: 110 mm<br/>cutter dia. min.: 170 mm<br/>total power requirement: 40 kw<br/>weight of the machine ca.: 7 t<br/>dimensions of the machine ca.: 4,5 x 4,5 x 2,4 m<br/>the machine is in a first-class condition.<br/><br/>accessories:<br/>- various milling arbors<br/>- coolant device<br/>- documentation<br/><br/><br/><br/><br/> WORKPIECE DIA.: 110 MM
MAX. MODULE: 10
MIN. MODULE:
SWING DIAMETER: 240 MM
TABLE RPM: 0,25-20 U/MIN.
TABLE HOLE: 63 MM
AXIAL TRAVEL: 400 MM
TOOLPIECE TURNING SPEED RANGE: 50 - 200 U/MIN
TOOL DIAMETER: 255 MM
TOOL LENGTH - MAX.: 50 MM
MILLING ARBORS: ISO 40 (50 MM)
RAPID TRAVEL RANGE: 3 M/MIN
CONTROL: BOSCH CC 300 M
MAX. WORKPIECE DIAMETER: 110 MM
CUTTER DIA. MIN.: 170 MM
TOTAL POWER REQUIREMENT: 40 KW
WEIGHT OF THE MACHINE CA.: 7 T
DIMENSIONS OF THE MACHINE CA.: 4,5 X 4,5 X 2,4 M
THE MACHINE IS IN A FIRST-CLASS CONDITION.

ACCESSORIES:
- VARIOUS MILLING ARBORS
- COOLANT DEVICE
- DOCUMENTATION




Vendedor: Leyendecker & Hollmann GmbH
Año de construcción: usado
Ubicación: Land-
general characteristics  
Ø max. gear  m 10 1800 mm/ m 12 1500mm/ m 15 1200mm  
module  15  
hobbing length  650 mm  
hob spindle speeds  29 / 114 rpm  
maximum inclination  60º  
maximum length tool  260 mm.  
maximum Ø of tool  210 mm  
minimum number milling teeth  12  
tangential tour  150 mm  
table features  
Ø hole table  160 mm  
Ø table  970 mm  
electrical characteristics  
main motor power  7,5 kw  
total power  8 kw  
dimensions and weights  
high  2.700 mm  
long  3.900 mm  
weight  8.500 kg  
width  2.450 mm  
other features  
included accessories  eje portafresa, ruedas de cambio, mandrinos portapieza, soporte de piezas,/ axis tools, change gears, collet chucks, parts support,  
no. manufacturing  12.826  
url youtube  abc://youtu.be/mfexosw424s  
 
 
 GENERAL CHARACTERISTICS Ø MAX. GEAR M 10 1800 MM/ M 12 1500MM/ M 15 1200MM MODULE 15 HOBBING LENGTH 650 MM HOB SPINDLE SPEEDS 29 / 114 RPM MAXIMUM INCLINATION 60º MAXIMUM LENGTH TOOL 260 MM. MAXIMUM Ø OF TOOL 210 MM MINIMUM NUMBER MILLING TEETH 12 TANGENTIAL TOUR 150 MM TABLE FEATURES Ø HOLE TABLE 160 MM Ø TABLE 970 MM ELECTRICAL CHARACTERISTICS MAIN MOTOR POWER 7,5 KW TOTAL POWER 8 KW DIMENSIONS AND WEIGHTS HIGH 2.700 MM LONG 3.900 MM WEIGHT 8.500 KG WIDTH 2.450 MM OTHER FEATURES INCLUDED ACCESSORIES EJE PORTAFRESA, RUEDAS DE CAMBIO, MANDRINOS PORTAPIEZA, SOPORTE DE PIEZAS,/ AXIS TOOLS, CHANGE GEARS, COLLET CHUCKS, PARTS SUPPORT, NO. MANUFACTURING 12.826 URL YOUTUBE ABC://YOUTU.BE/MFEXOSW424S
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 1.600 mm<br/>gear width: 600 mm<br/>max. module: 25 <br/>minimal workpiece - internal diameter: 630 mm<br/>control: sinumerik 840 d <br/>x-axis: 650 mm<br/>z-axis: 1.300 mm<br/>rapid traverse x-axis: 3.000 mm/min<br/>rapid traverse z-axis: 4.000 mm/min<br/>swivel angle of the milling head: + / - 15 °<br/>weight of the machine ca.: ca. 34 t<br/>dimensions of the machine ca.: 8,39 x 8,475 x 4,215 m<br/>--- for internal gears only ---<br/><br/>hob- and single cutter dimensions:<br/>max. outside diameter    440 mm<br/>min. tip diameter        310 mm<br/>max. length              90 mm<br/>diameter cutter arbor    90 mm<br/><br/>workpiece table:<br/>external diameter    1.460 mm<br/>bore diameter         500 mm<br/>max. load            200 kn<br/><br/>turning speeds:<br/>tool                18 - 180 r.p.m.<br/>workpiece table     0 - 8 r.p.m.<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 1.600 MM
GEAR WIDTH: 600 MM
MAX. MODULE: 25
MINIMAL WORKPIECE - INTERNAL DIAMETER: 630 MM
CONTROL: SINUMERIK 840 D
X-AXIS: 650 MM
Z-AXIS: 1.300 MM
RAPID TRAVERSE X-AXIS: 3.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 4.000 MM/MIN
SWIVEL ANGLE OF THE MILLING HEAD: + / - 15 °
WEIGHT OF THE MACHINE CA.: CA. 34 T
DIMENSIONS OF THE MACHINE CA.: 8,39 X 8,475 X 4,215 M
--- FOR INTERNAL GEARS ONLY ---

HOB- AND SINGLE CUTTER DIMENSIONS:
MAX. OUTSIDE DIAMETER 440 MM
MIN. TIP DIAMETER 310 MM
MAX. LENGTH 90 MM
DIAMETER CUTTER ARBOR 90 MM

WORKPIECE TABLE:
EXTERNAL DIAMETER 1.460 MM
BORE DIAMETER 500 MM
MAX. LOAD 200 KN

TURNING SPEEDS:
TOOL 18 - 180 R.P.M.
WORKPIECE TABLE 0 - 8 R.P.M.




Vendedor: Leyendecker & Hollmann GmbH
Año de construcción: usado
Ubicación: Land-
general characteristics  
Ø max. gear  100 mm  
module  4  
hobbing length  120 mm  
maximum length tool  130 mm  
maximum Ø of tool  100 mm  
table features  
Ø table  240 mm  
electrical characteristics  
engine cooling power  0.37 kw  
lubricate motor power  0.75 kw  
main motor power  5.5 kw  
motor power chip conveyor  0.05 kw  
power hydraulic motor  2.2 kw  
total power  16.5 kw  
dimensions and weights  
high  2.400 mm  
long  2.600 mm  
weight  4.500 kg  
width  1.900 mm  
other features  
included accessories  amarre hidraulico de pieza  
no. manufacturing  23948  
year  1980  
 
 
 GENERAL CHARACTERISTICS Ø MAX. GEAR 100 MM MODULE 4 HOBBING LENGTH 120 MM MAXIMUM LENGTH TOOL 130 MM MAXIMUM Ø OF TOOL 100 MM TABLE FEATURES Ø TABLE 240 MM ELECTRICAL CHARACTERISTICS ENGINE COOLING POWER 0.37 KW LUBRICATE MOTOR POWER 0.75 KW MAIN MOTOR POWER 5.5 KW MOTOR POWER CHIP CONVEYOR 0.05 KW POWER HYDRAULIC MOTOR 2.2 KW TOTAL POWER 16.5 KW DIMENSIONS AND WEIGHTS HIGH 2.400 MM LONG 2.600 MM WEIGHT 4.500 KG WIDTH 1.900 MM OTHER FEATURES INCLUDED ACCESSORIES AMARRE HIDRAULICO DE PIEZA NO. MANUFACTURING 23948 YEAR 1980
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 1250 mm<br/>gear width: 580 mm<br/>max. module: 12 <br/>min. module:  <br/>shifting: 240 mm<br/>milling spindle speeds (infinitely variable): 32 - 200 u/min<br/>center distance betw. workpiece-tool min/max.: 60 / 740 mm<br/>min. number of teeth: 12 <br/>table diameter: 950 mm<br/>table bore diameter: 200 mm<br/>hob dia. - max.: 220 x 260 mm<br/>feeds - tangential: 0,126 - 2,53 mm/min<br/>feeds - radial: 0,09 - 1,8 mm/min<br/>feeds - axial: 0,30 - 6 mm/min<br/>main drive: 11 kw<br/>wheel diameter with counterstay: 750 mm<br/>wheel diameter - without counterstay: 1250 mm<br/>electrics - voltage/frequency: 380 / 50 v/hz<br/>total power requirement: 25 kva<br/>weight of the machine ca.: 12 t<br/>dimensions of the machine ca.: 4,9 x 3,0 x 2,5 m<br/>set of change gears, 8 hob arbors, 4 clamping pots, 6 clamping fixtures, 3 jaw <br/>chuck,outer steady, coolant, hydraulic, autom. hob-shifting, etc.<br/><br/>2012 new panting and partly rebuild<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 1250 MM
GEAR WIDTH: 580 MM
MAX. MODULE: 12
MIN. MODULE:
SHIFTING: 240 MM
MILLING SPINDLE SPEEDS (INFINITELY VARIABLE): 32 - 200 U/MIN
CENTER DISTANCE BETW. WORKPIECE-TOOL MIN/MAX.: 60 / 740 MM
MIN. NUMBER OF TEETH: 12
TABLE DIAMETER: 950 MM
TABLE BORE DIAMETER: 200 MM
HOB DIA. - MAX.: 220 X 260 MM
FEEDS - TANGENTIAL: 0,126 - 2,53 MM/MIN
FEEDS - RADIAL: 0,09 - 1,8 MM/MIN
FEEDS - AXIAL: 0,30 - 6 MM/MIN
MAIN DRIVE: 11 KW
WHEEL DIAMETER WITH COUNTERSTAY: 750 MM
WHEEL DIAMETER - WITHOUT COUNTERSTAY: 1250 MM
ELECTRICS - VOLTAGE/FREQUENCY: 380 / 50 V/HZ
TOTAL POWER REQUIREMENT: 25 KVA
WEIGHT OF THE MACHINE CA.: 12 T
DIMENSIONS OF THE MACHINE CA.: 4,9 X 3,0 X 2,5 M
SET OF CHANGE GEARS, 8 HOB ARBORS, 4 CLAMPING POTS, 6 CLAMPING FIXTURES, 3 JAW
CHUCK,OUTER STEADY, COOLANT, HYDRAULIC, AUTOM. HOB-SHIFTING, ETC.

2012 NEW PANTING AND PARTLY REBUILD




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-general characteristics  
Ø max. gear  100 mm  
module  4  
hobbing length  120 mm  
maximum length tool  130 mm  
maximum Ø of tool  100 mm  
table features  
Ø table  300 mm  
electrical characteristics  
engine cooling power  0.37kw  
main motor power  5.5kw  
motor power chip conveyor  0.05kw  
motor power shifting  0.25kw  
power hydraulic motor  2.2kw  
total power  16.5 kw  
voltage  220/380 v  
dimensions and weights  
high  2.400 mm  
long  2.600 mm  
weight  4.500 kg  
width  1.900 mm  
other features  
included accessories  shifting automatico  
year  1980  
 GENERAL CHARACTERISTICS Ø MAX. GEAR 100 MM MODULE 4 HOBBING LENGTH 120 MM MAXIMUM LENGTH TOOL 130 MM MAXIMUM Ø OF TOOL 100 MM TABLE FEATURES Ø TABLE 300 MM ELECTRICAL CHARACTERISTICS ENGINE COOLING POWER 0.37KW MAIN MOTOR POWER 5.5KW MOTOR POWER CHIP CONVEYOR 0.05KW MOTOR POWER SHIFTING 0.25KW POWER HYDRAULIC MOTOR 2.2KW TOTAL POWER 16.5 KW VOLTAGE 220/380 V DIMENSIONS AND WEIGHTS HIGH 2.400 MM LONG 2.600 MM WEIGHT 4.500 KG WIDTH 1.900 MM OTHER FEATURES INCLUDED ACCESSORIES SHIFTING AUTOMATICO YEAR 1980
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. workpiece diameter: 440 mm<br/>threading length: 4000 mm<br/>max. module: 12 <br/>min. module: 0,5 <br/>max. wheel diameter: 440 mm<br/>gear width: 4000 mm<br/>no. of teeth to be hobbed: 3 - 300 mm<br/>max. swing diameter: 600 mm<br/>slide cross: axial  =  4000 mm<br/>dist. cutter spindle - workpiece spindle: 50 / 316 mm<br/>diameter of hob: 192 x 220 mm<br/>head swivability: +/- 45 °<br/>taper: morse 5 <br/>shifting: 200 mm<br/>milling drive motor: 22 kw<br/>hob turning speeds: 80 - 340 u/min<br/>electrics - voltage/frequency: 400 / 50 v/hz<br/>control: sinumerik 840 d <br/>total power requirement: 70 kw<br/>weight of the machine ca.: 22 t<br/>dimensions of the machine ca.: 7,5 x 4,0 x 2,3 m<br/>2013 complete rebuilt and modernized with  cnc control siemens sinumerik<br/>840 d (powerline) with electron. handwheel), all axis/spindles are digitally <br/>driven, hob head with tangential slide and automatic swivel and positioning,<br/>infinitely variable hob drive 22kw<br/>coolant, oil mist exhauster, chip conveyor, full covering, index drive - speed<br/>range 0-15rpm, software with failure diagnostic, phone-diagnostic-system, set <br/>of steady rests, standard hobbing software,<br/>ce-certificate per 2006/42 eg  -  12 months factory warranty<br/><br/><br/><br/><br/><br/><br/> MAX. WORKPIECE DIAMETER: 440 MM
THREADING LENGTH: 4000 MM
MAX. MODULE: 12
MIN. MODULE: 0,5
MAX. WHEEL DIAMETER: 440 MM
GEAR WIDTH: 4000 MM
NO. OF TEETH TO BE HOBBED: 3 - 300 MM
MAX. SWING DIAMETER: 600 MM
SLIDE CROSS: AXIAL = 4000 MM
DIST. CUTTER SPINDLE - WORKPIECE SPINDLE: 50 / 316 MM
DIAMETER OF HOB: 192 X 220 MM
HEAD SWIVABILITY: +/- 45 °
TAPER: MORSE 5
SHIFTING: 200 MM
MILLING DRIVE MOTOR: 22 KW
HOB TURNING SPEEDS: 80 - 340 U/MIN
ELECTRICS - VOLTAGE/FREQUENCY: 400 / 50 V/HZ
CONTROL: SINUMERIK 840 D
TOTAL POWER REQUIREMENT: 70 KW
WEIGHT OF THE MACHINE CA.: 22 T
DIMENSIONS OF THE MACHINE CA.: 7,5 X 4,0 X 2,3 M
2013 COMPLETE REBUILT AND MODERNIZED WITH CNC CONTROL SIEMENS SINUMERIK
840 D (POWERLINE) WITH ELECTRON. HANDWHEEL), ALL AXIS/SPINDLES ARE DIGITALLY
DRIVEN, HOB HEAD WITH TANGENTIAL SLIDE AND AUTOMATIC SWIVEL AND POSITIONING,
INFINITELY VARIABLE HOB DRIVE 22KW
COOLANT, OIL MIST EXHAUSTER, CHIP CONVEYOR, FULL COVERING, INDEX DRIVE - SPEED
RANGE 0-15RPM, SOFTWARE WITH FAILURE DIAGNOSTIC, PHONE-DIAGNOSTIC-SYSTEM, SET
OF STEADY RESTS, STANDARD HOBBING SOFTWARE,
CE-CERTIFICATE PER 2006/42 EG - 12 MONTHS FACTORY WARRANTY






Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-general characteristics  
Ø max. gear  210 mm  
module  6  
hobbing length  275 mm  
cone milling spindle  morse 5  
distance between spindle axis and axis table  min 40 max 200 mm + 60 de desplazamiento hidráulico  
hob spindle speeds  315 mm  
maximum inclination  +/- 40º  
maximum length tool  228 mm  
maximum Ø of tool  163 mm  
minimum number milling teeth  4  
tangential tour  170 mm  
table features  
Ø hole table  90 mm  
Ø table  240 mm  
electrical characteristics  
total power  26 kva  
voltage  220/380 v  
dimensions and weights  
high  3.085 mm  
long  5.970 mm  
weight  10.980 kg  
width  2.940 mm  
other features  
included accessories  shifting automático, contrapunto hidráulico, amarre hidráulico, cargador automático de piezas.  
year  1.983  
 GENERAL CHARACTERISTICS Ø MAX. GEAR 210 MM MODULE 6 HOBBING LENGTH 275 MM CONE MILLING SPINDLE MORSE 5 DISTANCE BETWEEN SPINDLE AXIS AND AXIS TABLE MIN 40 MAX 200 MM + 60 DE DESPLAZAMIENTO HIDRáULICO HOB SPINDLE SPEEDS 315 MM MAXIMUM INCLINATION +/- 40º MAXIMUM LENGTH TOOL 228 MM MAXIMUM Ø OF TOOL 163 MM MINIMUM NUMBER MILLING TEETH 4 TANGENTIAL TOUR 170 MM TABLE FEATURES Ø HOLE TABLE 90 MM Ø TABLE 240 MM ELECTRICAL CHARACTERISTICS TOTAL POWER 26 KVA VOLTAGE 220/380 V DIMENSIONS AND WEIGHTS HIGH 3.085 MM LONG 5.970 MM WEIGHT 10.980 KG WIDTH 2.940 MM OTHER FEATURES INCLUDED ACCESSORIES SHIFTING AUTOMáTICO, CONTRAPUNTO HIDRáULICO, AMARRE HIDRáULICO, CARGADOR AUTOMáTICO DE PIEZAS. YEAR 1.983
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 3000 mm<br/>gear width: 1200 mm<br/>max. module: 30 / 36 <br/>min. module: 2 <br/>table diameter: 2500 mm<br/>hob dia. - max.: 450 x 500 mm<br/>milling spindle speeds: 10 - 165 u/min<br/>hob length max.: 500 mm<br/>min. number of teeth: 20 <br/>tip circle diameter: 2050 mm<br/>tooth helical angle min/max: 0 - 45 °<br/>center distance betw. workpiece-tool min/max.: 150 - 1750 mm<br/>milling slide swivelling: 50 grad<br/>distance table / counter stay: 1050 - 2050 mm<br/>shifting: 300 mm<br/>workpiece weight: 40 t<br/>table bore diameter: 800 mm<br/>depth of hole: 1100 mm<br/>main drive motor: 37 kw<br/>table load capacity: 400 kn<br/>min. number of teeth: wälzfräsen 20 <br/>min. number of teeth: formfräsen 2 <br/>taper: mk 100 <br/>feeds axial: 1 - 1800 mm/min<br/>radial feed: 1 - 500 mm/min<br/>feed: tangential 1 - 450 mm/min<br/>rapid traverse: 1875 / 530 / 470 mm/min<br/>electrics - voltage/frequency: 380 / 50 v/hz<br/>control: siemens sinumerik 3m <br/>total power requirement: 125 kva<br/>weight of the machine ca.: 73 t<br/>dimensions of the machine ca.: 11,2 x 5,1 x 6,9 m<br/>gear hobbing machine ( rebuilt 2006 ) equipped with: <br/>- cnc continuous path control siemens sinumerik 3 m for 4 axis (a/y/x/z)<br/>with electronic hand wheel, with incremental measuring systems, digital <br/>position displays and integrated programmable control (sps).<br/>- siemens simodrive 611<br/>- automatic work cycles for axial, radial and tangential hobbing, crown/taper <br/>hobbing etc.<br/>- movable control panel<br/>- set of change gears for differential gear and indexing (approx. 115pcs)<br/>- max workpiece dia with outer steady 2000mm,<br/>- tailstock column with tailstockarm, steadyrest support, dia 290 / 625 mm,<br/>- chip conveyor<br/>- paperband filter<br/>- cooling unit<br/>- rexroth hydraulic<br/>- arbors (7)<br/>- levelling shoes (37)<br/>- automatic single indexing device      <br/><br/>2006 partl. rebuilt (e.g. new ball screw spindle with screw nut)<br/>in excellent working condition<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 3000 MM
GEAR WIDTH: 1200 MM
MAX. MODULE: 30 / 36
MIN. MODULE: 2
TABLE DIAMETER: 2500 MM
HOB DIA. - MAX.: 450 X 500 MM
MILLING SPINDLE SPEEDS: 10 - 165 U/MIN
HOB LENGTH MAX.: 500 MM
MIN. NUMBER OF TEETH: 20
TIP CIRCLE DIAMETER: 2050 MM
TOOTH HELICAL ANGLE MIN/MAX: 0 - 45 °
CENTER DISTANCE BETW. WORKPIECE-TOOL MIN/MAX.: 150 - 1750 MM
MILLING SLIDE SWIVELLING: 50 GRAD
DISTANCE TABLE / COUNTER STAY: 1050 - 2050 MM
SHIFTING: 300 MM
WORKPIECE WEIGHT: 40 T
TABLE BORE DIAMETER: 800 MM
DEPTH OF HOLE: 1100 MM
MAIN DRIVE MOTOR: 37 KW
TABLE LOAD CAPACITY: 400 KN
MIN. NUMBER OF TEETH: WäLZFRäSEN 20
MIN. NUMBER OF TEETH: FORMFRäSEN 2
TAPER: MK 100
FEEDS AXIAL: 1 - 1800 MM/MIN
RADIAL FEED: 1 - 500 MM/MIN
FEED: TANGENTIAL 1 - 450 MM/MIN
RAPID TRAVERSE: 1875 / 530 / 470 MM/MIN
ELECTRICS - VOLTAGE/FREQUENCY: 380 / 50 V/HZ
CONTROL: SIEMENS SINUMERIK 3M
TOTAL POWER REQUIREMENT: 125 KVA
WEIGHT OF THE MACHINE CA.: 73 T
DIMENSIONS OF THE MACHINE CA.: 11,2 X 5,1 X 6,9 M
GEAR HOBBING MACHINE ( REBUILT 2006 ) EQUIPPED WITH:
- CNC CONTINUOUS PATH CONTROL SIEMENS SINUMERIK 3 M FOR 4 AXIS (A/Y/X/Z)
WITH ELECTRONIC HAND WHEEL, WITH INCREMENTAL MEASURING SYSTEMS, DIGITAL
POSITION DISPLAYS AND INTEGRATED PROGRAMMABLE CONTROL (SPS).
- SIEMENS SIMODRIVE 611
- AUTOMATIC WORK CYCLES FOR AXIAL, RADIAL AND TANGENTIAL HOBBING, CROWN/TAPER
HOBBING ETC.
- MOVABLE CONTROL PANEL
- SET OF CHANGE GEARS FOR DIFFERENTIAL GEAR AND INDEXING (APPROX. 115PCS)
- MAX WORKPIECE DIA WITH OUTER STEADY 2000MM,
- TAILSTOCK COLUMN WITH TAILSTOCKARM, STEADYREST SUPPORT, DIA 290 / 625 MM,
- CHIP CONVEYOR
- PAPERBAND FILTER
- COOLING UNIT
- REXROTH HYDRAULIC
- ARBORS (7)
- LEVELLING SHOES (37)
- AUTOMATIC SINGLE INDEXING DEVICE

2006 PARTL. REBUILT (E.G. NEW BALL SCREW SPINDLE WITH SCREW NUT)
IN EXCELLENT WORKING CONDITION




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-general characteristics  
Ø max. gear  210 mm  
module  6  
hobbing length  275 mm  
cone milling spindle  morse 5  
distance between spindle axis and axis table  min 40 max 200 mm + 60 de desplazamiento hidráulico  
hob spindle speeds  315 mm  
maximum inclination  +/- 40º  
maximum length tool  228 mm  
maximum Ø of tool  163 mm  
minimum number milling teeth  4  
tangential tour  170 mm  
table features  
Ø hole table  90 mm  
Ø table  240 mm  
electrical characteristics  
total power  26 kva  
voltage  220/380 v  
dimensions and weights  
high  3.085 mm  
long  5.970 mm  
weight  10.980 kg  
width  2.940 mm  
other features  
included accessories  shifting automático, contrapunto hidráulico, amarre hidráulico, cargador automático de piezas.  
year  1.983  
 GENERAL CHARACTERISTICS Ø MAX. GEAR 210 MM MODULE 6 HOBBING LENGTH 275 MM CONE MILLING SPINDLE MORSE 5 DISTANCE BETWEEN SPINDLE AXIS AND AXIS TABLE MIN 40 MAX 200 MM + 60 DE DESPLAZAMIENTO HIDRáULICO HOB SPINDLE SPEEDS 315 MM MAXIMUM INCLINATION +/- 40º MAXIMUM LENGTH TOOL 228 MM MAXIMUM Ø OF TOOL 163 MM MINIMUM NUMBER MILLING TEETH 4 TANGENTIAL TOUR 170 MM TABLE FEATURES Ø HOLE TABLE 90 MM Ø TABLE 240 MM ELECTRICAL CHARACTERISTICS TOTAL POWER 26 KVA VOLTAGE 220/380 V DIMENSIONS AND WEIGHTS HIGH 3.085 MM LONG 5.970 MM WEIGHT 10.980 KG WIDTH 2.940 MM OTHER FEATURES INCLUDED ACCESSORIES SHIFTING AUTOMáTICO, CONTRAPUNTO HIDRáULICO, AMARRE HIDRáULICO, CARGADOR AUTOMáTICO DE PIEZAS. YEAR 1.983
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 1500 mm<br/>gear width: 600 mm<br/>max. module: 16 <br/>min. module:  <br/>min. number of teeth: 9 <br/>clamping table diameter: 1200 mm<br/>table bore diameter: 300 mm<br/>diameter of hob: 255 x 280 mm<br/>shifting: 250 mm<br/>milling spindle speeds (infinitely variable): 30 - 180 u/min<br/>wheel diameter with counterstay: 900 mm<br/>wheel diameter - without counterstay: 1500 mm<br/>main drive motor: 15 kw<br/>milling slide swivelling: 240 °<br/>center distance betw. workpiece-tool min/max.: 60 - 870 mm<br/>feeds - axial: 0,50 - 6,00 mm/wu<br/>feeds - radial: 0,18 - 2,16 mm/wu<br/>feeds - tangential: 0,22 - 2,50 mm/wu<br/>distance millingspindel-table min./max.: 1500 mm<br/>dimensions (l/w/h): 5,0 x 2,4 x 3,2 mm<br/>total power requirement: ca. 38,5 kw<br/>weight of the machine ca.: 18,7 t<br/>dimensions of the machine ca.: 7,4 x 3,3 x 4,6 m<br/>for straight, helical spur gears and worm wheels<br/>(axial, radial and tangential feed)<br/>equipped with:<br/>- counter stay<br/>- cooling<br/>- 2-cut cycle<br/>- intermittent hob (indexing)<br/>- crowning / crown hobbing<br/>- shifting<br/>- prim number hobbing<br/>- change gears & hob arbors<br/>- manual<br/>ger hobber especially suitable for: straight and helical spur gears, worm<br/>wheels etc.<br/>equipped with:<br/>- set of change gears<br/>- outer steady<br/>- intermittent hob, shifting attachment<br/>- 2-cut workcycle, prime number hobbing attachment<br/>- crown hobbing attachment<br/>- coolant, work- and hob arbors, handbooks<br/><br/>in excellent working condition ex factory - dismantled/ready for loading<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 1500 MM
GEAR WIDTH: 600 MM
MAX. MODULE: 16
MIN. MODULE:
MIN. NUMBER OF TEETH: 9
CLAMPING TABLE DIAMETER: 1200 MM
TABLE BORE DIAMETER: 300 MM
DIAMETER OF HOB: 255 X 280 MM
SHIFTING: 250 MM
MILLING SPINDLE SPEEDS (INFINITELY VARIABLE): 30 - 180 U/MIN
WHEEL DIAMETER WITH COUNTERSTAY: 900 MM
WHEEL DIAMETER - WITHOUT COUNTERSTAY: 1500 MM
MAIN DRIVE MOTOR: 15 KW
MILLING SLIDE SWIVELLING: 240 °
CENTER DISTANCE BETW. WORKPIECE-TOOL MIN/MAX.: 60 - 870 MM
FEEDS - AXIAL: 0,50 - 6,00 MM/WU
FEEDS - RADIAL: 0,18 - 2,16 MM/WU
FEEDS - TANGENTIAL: 0,22 - 2,50 MM/WU
DISTANCE MILLINGSPINDEL-TABLE MIN./MAX.: 1500 MM
DIMENSIONS (L/W/H): 5,0 X 2,4 X 3,2 MM
TOTAL POWER REQUIREMENT: CA. 38,5 KW
WEIGHT OF THE MACHINE CA.: 18,7 T
DIMENSIONS OF THE MACHINE CA.: 7,4 X 3,3 X 4,6 M
FOR STRAIGHT, HELICAL SPUR GEARS AND WORM WHEELS
(AXIAL, RADIAL AND TANGENTIAL FEED)
EQUIPPED WITH:
- COUNTER STAY
- COOLING
- 2-CUT CYCLE
- INTERMITTENT HOB (INDEXING)
- CROWNING / CROWN HOBBING
- SHIFTING
- PRIM NUMBER HOBBING
- CHANGE GEARS & HOB ARBORS
- MANUAL
GER HOBBER ESPECIALLY SUITABLE FOR: STRAIGHT AND HELICAL SPUR GEARS, WORM
WHEELS ETC.
EQUIPPED WITH:
- SET OF CHANGE GEARS
- OUTER STEADY
- INTERMITTENT HOB, SHIFTING ATTACHMENT
- 2-CUT WORKCYCLE, PRIME NUMBER HOBBING ATTACHMENT
- CROWN HOBBING ATTACHMENT
- COOLANT, WORK- AND HOB ARBORS, HANDBOOKS

IN EXCELLENT WORKING CONDITION EX FACTORY - DISMANTLED/READY FOR LOADING




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-general characteristics  
Ø max. gear  430 mm  
module  8  
hobbing length  275 mm  
brand cnc  siemens  
cone milling spindle  morse 5  
hob spindle speeds  max 550 r.p.m.  
maximum inclination  +/- 40º  
maximum length tool  228 mm  
maximum Ø of tool  163 mm  
minimum number milling teeth  4  
number of axles cnc  4 (z,x,b y c)  
tangential tour  170 mm  
table features  
Ø hole table  90 mm  
Ø table  240 mm  
electrical characteristics  
motor power axial (z)  13 nm.  
motor power radial (x)  13 nm.  
motor power table (c)  20 nm.  
power tool motor (b)  12 kw.  
total power  36kw  
voltage  220/380 v  
dimensions and weights  
high  3.085 mm  
long  5.970 mm  
weight  10.980 kg  
width  2.940 mm  
other features  
included accessories  extractor de virutas  
 GENERAL CHARACTERISTICS Ø MAX. GEAR 430 MM MODULE 8 HOBBING LENGTH 275 MM BRAND CNC SIEMENS CONE MILLING SPINDLE MORSE 5 HOB SPINDLE SPEEDS MAX 550 R.P.M. MAXIMUM INCLINATION +/- 40º MAXIMUM LENGTH TOOL 228 MM MAXIMUM Ø OF TOOL 163 MM MINIMUM NUMBER MILLING TEETH 4 NUMBER OF AXLES CNC 4 (Z,X,B Y C) TANGENTIAL TOUR 170 MM TABLE FEATURES Ø HOLE TABLE 90 MM Ø TABLE 240 MM ELECTRICAL CHARACTERISTICS MOTOR POWER AXIAL (Z) 13 NM. MOTOR POWER RADIAL (X) 13 NM. MOTOR POWER TABLE (C) 20 NM. POWER TOOL MOTOR (B) 12 KW. TOTAL POWER 36KW VOLTAGE 220/380 V DIMENSIONS AND WEIGHTS HIGH 3.085 MM LONG 5.970 MM WEIGHT 10.980 KG WIDTH 2.940 MM OTHER FEATURES INCLUDED ACCESSORIES EXTRACTOR DE VIRUTAS
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 275 mm<br/>gear width: 58 mm<br/>max. module:  <br/>min. module:  <br/>control: siemens 840d <br/>number of teeth: 5 - 200 <br/>ratio of transmission: 10:1 <br/>cutter diameter max.: 228 mm<br/>x-axis: 25-350 mm<br/>y-axis: +/- 175 mm<br/>z-axis: 125-600 mm<br/>b-axis: -5 / +90 °<br/>total power requirement:  kw<br/>weight of the machine ca.: 10 t<br/>dimensions of the machine ca.:  m<br/>- dry-cutting machine<br/>- cnc control siemens 840d<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 275 MM
GEAR WIDTH: 58 MM
MAX. MODULE:
MIN. MODULE:
CONTROL: SIEMENS 840D
NUMBER OF TEETH: 5 - 200
RATIO OF TRANSMISSION: 10:1
CUTTER DIAMETER MAX.: 228 MM
X-AXIS: 25-350 MM
Y-AXIS: +/- 175 MM
Z-AXIS: 125-600 MM
B-AXIS: -5 / +90 °
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 10 T
DIMENSIONS OF THE MACHINE CA.: M
- DRY-CUTTING MACHINE
- CNC CONTROL SIEMENS 840D




Vendedor: WALTER KAMES GMBH
Año de construcción: usado
Ubicación: Land-general characteristics  
Ø max. gear  1.250 mm.  
module  12  
hobbing length  585 mm.  
cone milling spindle  morse 5  
distance between spindle axis and axis table  min.60 mm. /max.737 mm.  
feed range, axial,  0,30 - 6 mm/min.  
feed range, radial  0,09 - 1,8 mm/min.  
feed range, tangential  0,126 - 2,53 mm/min.  
hob spindle speeds  32-200 r.p.m.  
maximum length tool  260 mm.  
maximum Ø of tool  220 mm.  
minimum number milling teeth  12  
tangential tour  240 mm  
table features  
Ø hole table  200 mm.  
Ø table  950 mm.  
electrical characteristics  
main motor power  11 kw.  
total power  25 kva.  
voltage  380 v.  
dimensions and weights  
high  3.000 mm.  
long  4,900 mm.  
weight  12 t.  
width  2.500 mm.  
other features  
included accessories  ciclo a dos pasadas, tallado diagonal, tallado tangencial, extractor magnético de virutas, carenado, ruedas de cambio, sifting automático, ejes portafresas / cycle two passes, hobbing diagonally, hobbing tangential, magnetic chip conveyor, fairing, change wheels, automatic sifting, milling axles  
no. manufacturing  22213  
url youtube  abc://youtu.be/5gvmshzxqne  
 GENERAL CHARACTERISTICS Ø MAX. GEAR 1.250 MM. MODULE 12 HOBBING LENGTH 585 MM. CONE MILLING SPINDLE MORSE 5 DISTANCE BETWEEN SPINDLE AXIS AND AXIS TABLE MIN.60 MM. /MAX.737 MM. FEED RANGE, AXIAL, 0,30 - 6 MM/MIN. FEED RANGE, RADIAL 0,09 - 1,8 MM/MIN. FEED RANGE, TANGENTIAL 0,126 - 2,53 MM/MIN. HOB SPINDLE SPEEDS 32-200 R.P.M. MAXIMUM LENGTH TOOL 260 MM. MAXIMUM Ø OF TOOL 220 MM. MINIMUM NUMBER MILLING TEETH 12 TANGENTIAL TOUR 240 MM TABLE FEATURES Ø HOLE TABLE 200 MM. Ø TABLE 950 MM. ELECTRICAL CHARACTERISTICS MAIN MOTOR POWER 11 KW. TOTAL POWER 25 KVA. VOLTAGE 380 V. DIMENSIONS AND WEIGHTS HIGH 3.000 MM. LONG 4,900 MM. WEIGHT 12 T. WIDTH 2.500 MM. OTHER FEATURES INCLUDED ACCESSORIES CICLO A DOS PASADAS, TALLADO DIAGONAL, TALLADO TANGENCIAL, EXTRACTOR MAGNéTICO DE VIRUTAS, CARENADO, RUEDAS DE CAMBIO, SIFTING AUTOMáTICO, EJES PORTAFRESAS / CYCLE TWO PASSES, HOBBING DIAGONALLY, HOBBING TANGENTIAL, MAGNETIC CHIP CONVEYOR, FAIRING, CHANGE WHEELS, AUTOMATIC SIFTING, MILLING AXLES NO. MANUFACTURING 22213 URL YOUTUBE ABC://YOUTU.BE/5GVMSHZXQNE
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 2400 mm<br/>gear width: - mm<br/>max. module: 35 <br/>min. module:  <br/>grinding slide stroke: 1300 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>upgrading processing ability of outer diameter to 2400 mm in 2012.<br/>with the latest technology:<br/>direct drive of the grinding spindle motor, without transmission.<br/><br/>with cnc-control siemens 840 d<br/>with steady rest<br/>min/max tailstock position over table: 925/2335 mm.<br/>extended the standard max. from 1825 to 2335 mm<br/><br/>current workpiece measurement protocol and data sheet attached.<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 2400 MM
GEAR WIDTH: - MM
MAX. MODULE: 35
MIN. MODULE:
GRINDING SLIDE STROKE: 1300 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
UPGRADING PROCESSING ABILITY OF OUTER DIAMETER TO 2400 MM IN 2012.
WITH THE LATEST TECHNOLOGY:
DIRECT DRIVE OF THE GRINDING SPINDLE MOTOR, WITHOUT TRANSMISSION.

WITH CNC-CONTROL SIEMENS 840 D
WITH STEADY REST
MIN/MAX TAILSTOCK POSITION OVER TABLE: 925/2335 MM.
EXTENDED THE STANDARD MAX. FROM 1825 TO 2335 MM

CURRENT WORKPIECE MEASUREMENT PROTOCOL AND DATA SHEET ATTACHED.




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-
general characteristics  
Ø max. gear  210 mm  
module  6  
hobbing length  275 mm  
cone milling spindle  morse 5  
hob spindle speeds  315 mm  
maximum inclination  +/- 40º  
maximum length tool  228 mm  
maximum Ø of tool  163 mm  
minimum number milling teeth  4  
tangential tour  170 mm  
table features  
Ø hole table  90 mm  
Ø table  240 mm  
electrical characteristics  
total power  26 kva  
voltage  220/380 v  
dimensions and weights  
high  3.085 mm  
long  5.970 mm  
weight  10.980 kg  
width  2.940 mm  
other features  
included accessories  shifting automático, contrapunto hidráulico, amarre hidráulico, cargador automático de piezas.  
year  1.983  
 
 
 GENERAL CHARACTERISTICS Ø MAX. GEAR 210 MM MODULE 6 HOBBING LENGTH 275 MM CONE MILLING SPINDLE MORSE 5 HOB SPINDLE SPEEDS 315 MM MAXIMUM INCLINATION +/- 40º MAXIMUM LENGTH TOOL 228 MM MAXIMUM Ø OF TOOL 163 MM MINIMUM NUMBER MILLING TEETH 4 TANGENTIAL TOUR 170 MM TABLE FEATURES Ø HOLE TABLE 90 MM Ø TABLE 240 MM ELECTRICAL CHARACTERISTICS TOTAL POWER 26 KVA VOLTAGE 220/380 V DIMENSIONS AND WEIGHTS HIGH 3.085 MM LONG 5.970 MM WEIGHT 10.980 KG WIDTH 2.940 MM OTHER FEATURES INCLUDED ACCESSORIES SHIFTING AUTOMáTICO, CONTRAPUNTO HIDRáULICO, AMARRE HIDRáULICO, CARGADOR AUTOMáTICO DE PIEZAS. YEAR 1.983
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 300 mm<br/>gear width: - mm<br/>max. module: 10 <br/>min. module:  <br/>hollow spindle diameter: 140 mm<br/>clamping length: 870 mm<br/>working length: 695 mm<br/>diameter of hob: max. 150 mm<br/>hob turning speeds: 35,5 / 45 / 56 / 71 u/min<br/>hob turning speeds: 90 / 112 / 140 / 180 u/min<br/>axial-feeds: 0,25 - 4 mm/wu<br/>total power requirement:  kw<br/>weight of the machine ca.: 4,5 t<br/>dimensions of the machine ca.: 2,3 x 2,7 x 1,8 m<br/>with reference to pfauter we have a special edition of gear hobbing machine.<br/><br/>our machine is the type rs 9 kd and d stands for a machine with duplex worm.<br/>with the duplex worm and the worm gear you can adjust the accuracy.<br/>further more our machine is equipped with a bigger hollow spindle with <br/>a diameter of 140 mm (standard approx.100 mm).<br/><br/>equipment:<br/>* change gears<br/>* differential<br/>* operator´s manual<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 300 MM
GEAR WIDTH: - MM
MAX. MODULE: 10
MIN. MODULE:
HOLLOW SPINDLE DIAMETER: 140 MM
CLAMPING LENGTH: 870 MM
WORKING LENGTH: 695 MM
DIAMETER OF HOB: MAX. 150 MM
HOB TURNING SPEEDS: 35,5 / 45 / 56 / 71 U/MIN
HOB TURNING SPEEDS: 90 / 112 / 140 / 180 U/MIN
AXIAL-FEEDS: 0,25 - 4 MM/WU
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 4,5 T
DIMENSIONS OF THE MACHINE CA.: 2,3 X 2,7 X 1,8 M
WITH REFERENCE TO PFAUTER WE HAVE A SPECIAL EDITION OF GEAR HOBBING MACHINE.

OUR MACHINE IS THE TYPE RS 9 KD AND D STANDS FOR A MACHINE WITH DUPLEX WORM.
WITH THE DUPLEX WORM AND THE WORM GEAR YOU CAN ADJUST THE ACCURACY.
FURTHER MORE OUR MACHINE IS EQUIPPED WITH A BIGGER HOLLOW SPINDLE WITH
A DIAMETER OF 140 MM (STANDARD APPROX.100 MM).

EQUIPMENT:
* CHANGE GEARS
* DIFFERENTIAL
* OPERATOR´S MANUAL




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-machine is in very good condition and m &amp;amp; #305; t magazine MACHINE IS IN VERY GOOD CONDITION AND M &AMP;AMP; #305; T MAGAZINE
Vendedor: SENER MASCHINEN
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 160 mm<br/>gear width: 180 mm<br/>max. module: 2,5 <br/>min. module:  <br/>total power requirement: 7,5 kw<br/>weight of the machine ca.: 2500 kg<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 160 MM
GEAR WIDTH: 180 MM
MAX. MODULE: 2,5
MIN. MODULE:
TOTAL POWER REQUIREMENT: 7,5 KW
WEIGHT OF THE MACHINE CA.: 2500 KG
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Precio: 12.000 €
Ubicación: Land-cnc hard gear huller with bosch control cc300 pf1
turning diameter: 150 mm
travel: 400 mm
the pressure angle, pitch angle, swivelling angle, module, number of teeth, reference diameter, width of gearing, profile move unf, factor, addendum modification coefficient, crowning
taper, etc. entered dialog program CNC HARD GEAR HULLER WITH BOSCH CONTROL CC300 PF1 TURNING DIAMETER: 150 MM TRAVEL: 400 MM THE PRESSURE ANGLE, PITCH ANGLE, SWIVELLING ANGLE, MODULE, NUMBER OF TEETH, REFERENCE DIAMETER, WIDTH OF GEARING, PROFILE MOVE UNF, FACTOR, ADDENDUM MODIFICATION COEFFICIENT, CROWNING TAPER, ETC. ENTERED DIALOG PROGRAM
Vendedor: SENER MASCHINEN
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 1800 mm<br/>gear width: 735 mm<br/>max. module: 12 <br/>min. module: 1 <br/>total power requirement: 30 kw<br/>weight of the machine ca.: 23 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 1800 MM
GEAR WIDTH: 735 MM
MAX. MODULE: 12
MIN. MODULE: 1
TOTAL POWER REQUIREMENT: 30 KW
WEIGHT OF THE MACHINE CA.: 23 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-max. module 6
max. diameter 400 mm.
max. run of milling holder 310 mm.
min.number of teeth 6
dimensions of milling cutter diam./length. 160/160 mm.
distance between milling cutter and work piece 20 a 290 mm.
run of milling cutter 80 a 500 r.p.m.
axial feed 0.40 a 7.50 mm/v.p.
radial feed 0.1 a 1.90 mm/v.p.
tangencial feeding 0.16 a 3 mm/v.p.
weight of the machine 4.600 kg.      MAX. MODULE 6 MAX. DIAMETER 400 MM. MAX. RUN OF MILLING HOLDER 310 MM. MIN.NUMBER OF TEETH 6 DIMENSIONS OF MILLING CUTTER DIAM./LENGTH. 160/160 MM. DISTANCE BETWEEN MILLING CUTTER AND WORK PIECE 20 A 290 MM. RUN OF MILLING CUTTER 80 A 500 R.P.M. AXIAL FEED 0.40 A 7.50 MM/V.P. RADIAL FEED 0.1 A 1.90 MM/V.P. TANGENCIAL FEEDING 0.16 A 3 MM/V.P. WEIGHT OF THE MACHINE 4.600 KG.
Vendedor: Mafrie Europa S.L.
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 900 mm<br/>gear width: 450 mm<br/>max. module: 10 <br/>min. module:  <br/>total power requirement: 16 kw<br/>weight of the machine ca.: 8.500 kg<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 900 MM
GEAR WIDTH: 450 MM
MAX. MODULE: 10
MIN. MODULE:
TOTAL POWER REQUIREMENT: 16 KW
WEIGHT OF THE MACHINE CA.: 8.500 KG
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)