30 ofertas

Año de construcción: usado
Ubicación: Land-max bending length: 3150 mm	
max bending thickness: 6.3 mm	
machine weight: 12400 kg	
 MAX BENDING LENGTH: 3150 MM MAX BENDING THICKNESS: 6.3 MM MACHINE WEIGHT: 12400 KG
Vendedor: AMARON s.r.o.
Año de construcción: usado
Precio: 15.200 €
Ubicación: Land-: 16 mm<br/>: 3.150 mm<br/>: 350 mm<br/>: 10 - 1.000 mm<br/>: 33 kw<br/>: 250 l<br/>: 4.240 mm<br/>: 2.620 mm<br/>: 2.570 mm<br/>: 16.300 kg<br/>motorized back gauge<br/>linear guided<br/>15 balls in table, balls in table are new<br/>1 side lay<br/>3 sheet support arms<br/>15 hyd. hold down units<br/>two hand control 2x<br/>hydraulic cylinders have new seals<br/>users manual partly in german, czech<br/><br/>does not comply with the present industrial safety regulation<br/><br/><br/><br/>cutting capacity:	16 mm<br/>cutting length: 3.150 mm<br/>throat depth: 350 mm<br/>back gauge: 10 - 1.000 mm<br/>cutting angle: 0,5 - 3°<br/>strokes: 12/min<br/>motor power: 33 kw<br/>oilfilling: 250 l<br/>length: 4.240 mm<br/>width: 2.620 mm<br/>heigth: 2.570 mm<br/>weight: 16.300 kg<br/><br/><br/><br/> : 16 MM
: 3.150 MM
: 350 MM
: 10 - 1.000 MM
: 33 KW
: 250 L
: 4.240 MM
: 2.620 MM
: 2.570 MM
: 16.300 KG
MOTORIZED BACK GAUGE
LINEAR GUIDED
15 BALLS IN TABLE, BALLS IN TABLE ARE NEW
1 SIDE LAY
3 SHEET SUPPORT ARMS
15 HYD. HOLD DOWN UNITS
TWO HAND CONTROL 2X
HYDRAULIC CYLINDERS HAVE NEW SEALS
USERS MANUAL PARTLY IN GERMAN, CZECH

DOES NOT COMPLY WITH THE PRESENT INDUSTRIAL SAFETY REGULATION



CUTTING CAPACITY: 16 MM
CUTTING LENGTH: 3.150 MM
THROAT DEPTH: 350 MM
BACK GAUGE: 10 - 1.000 MM
CUTTING ANGLE: 0,5 - 3°
STROKES: 12/MIN
MOTOR POWER: 33 KW
OILFILLING: 250 L
LENGTH: 4.240 MM
WIDTH: 2.620 MM
HEIGTH: 2.570 MM
WEIGHT: 16.300 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-sheet thickness: 0.6-6.3mm, max. bending length: 2000mm, length: 2800mm, width: 2160mm, height: 1600mm, weight: 7.35t.  SHEET THICKNESS: 0.6-6.3MM, MAX. BENDING LENGTH: 2000MM, LENGTH: 2800MM, WIDTH: 2160MM, HEIGHT: 1600MM, WEIGHT: 7.35T.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 2.200 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-complete overhaul in 2014
min/max metal thickness: 1/10 mm
maximum cutting length: 3150 mm
cutting angle: 0.5 2.5 â°
backgauge adjustment: 10-1000 mm
hub number in maximum length: 17 / min
power: 33 kva
dimensions (l x w x h): 4200 x 2550 x 2225 mm
weight: 11,500 kg COMPLETE OVERHAUL IN 2014 MIN/MAX METAL THICKNESS: 1/10 MM MAXIMUM CUTTING LENGTH: 3150 MM CUTTING ANGLE: 0.5 2.5 &ACIRC;&DEG; BACKGAUGE ADJUSTMENT: 10-1000 MM HUB NUMBER IN MAXIMUM LENGTH: 17 / MIN POWER: 33 KVA DIMENSIONS (L X W X H): 4200 X 2550 X 2225 MM WEIGHT: 11,500 KG
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Precio: 1.950 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-max. length of cutting: 3150 mm	
max. plate thickness: 25 mm	
motor power: 48 kw	
hydraulic	
machine dimensions	
4260 x 2780 x 3180 mm	
machine weight: 24000 kg MAX. LENGTH OF CUTTING: 3150 MM MAX. PLATE THICKNESS: 25 MM MOTOR POWER: 48 KW HYDRAULIC MACHINE DIMENSIONS 4260 X 2780 X 3180 MM MACHINE WEIGHT: 24000 KG
Vendedor: AMARON s.r.o.
Año de construcción: usado
Precio: 1.150 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-working width: 2000 mm sheet thickness up to: 6.3 mm number of straightening rollers: 11 setting rollers ã?: 95 mm drive motor: 380 v, 20 kw space: 4500 x 1360 x 2300 mm weight: 12200 kg 
 WORKING WIDTH: 2000 MM SHEET THICKNESS UP TO: 6.3 MM NUMBER OF STRAIGHTENING ROLLERS: 11 SETTING ROLLERS &ATILDE;?: 95 MM DRIVE MOTOR: 380 V, 20 KW SPACE: 4500 X 1360 X 2300 MM WEIGHT: 12200 KG
Vendedor: Kurt Steiger Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 19.500 €
Ubicación: Land-sheet width: 3150 mm<br/>plate thickness: 24 mm<br/>pre-bending: 16 mm<br/>roll diameter: 455 mm<br/>total power requirement: 30 kw<br/>weight of the machine ca.: 40 t<br/>motorized 2-roller-drive:  <br/>hydraulical bearing:  <br/>motorical adjustment of the down rolls:  <br/>with extended roll ends for profile rolls (profile rolls not included)<br/><br/><br/><br/><br/> SHEET WIDTH: 3150 MM
PLATE THICKNESS: 24 MM
PRE-BENDING: 16 MM
ROLL DIAMETER: 455 MM
TOTAL POWER REQUIREMENT: 30 KW
WEIGHT OF THE MACHINE CA.: 40 T
MOTORIZED 2-ROLLER-DRIVE:
HYDRAULICAL BEARING:
MOTORICAL ADJUSTMENT OF THE DOWN ROLLS:
WITH EXTENDED ROLL ENDS FOR PROFILE ROLLS (PROFILE ROLLS NOT INCLUDED)




Vendedor: WeMa A. Pigge GmbH
Año de construcción: usado
Ubicación: Land-electro mechanical table shears ntc 2500-4 manufacturer: piesok cssr
 manr. n 74-005 built in 1981

performance according to the manual:
 cutting capacity: 4 mm / 400 n / mmâ²
schnittllã¤nge: 2550 mm
 cutting angle: 1.33 â°
 projection in stand: 200 mm
 performance d. electric motor: 5,5 kw

dimensions: 3100 x 1600 x height; 1420 mm
 weight: approximately 3 800 kg

developed with accessories, manual

the electric cabinet was modernised in 2003 with various elements.
 the engine of the back fence has been removed from uvv reasons, as well as the rear fence rail.
 bc7djvz0ab

we can demand a small gear motor and a rail to self cultivation of the buyer
 provide against the back fence, without warranty. discuss details with mr dieter stumpf.
 sale takes place in the present used condition without any warranty.
 the scissors is seducible in the camp.  ELECTRO MECHANICAL TABLE SHEARS NTC 2500-4 MANUFACTURER: PIESOK CSSR MANR. N 74-005 BUILT IN 1981 PERFORMANCE ACCORDING TO THE MANUAL: CUTTING CAPACITY: 4 MM / 400 N / MM&ACIRC;&SUP2; SCHNITTLL&ATILDE;&CURREN;NGE: 2550 MM CUTTING ANGLE: 1.33 &ACIRC;&DEG; PROJECTION IN STAND: 200 MM PERFORMANCE D. ELECTRIC MOTOR: 5,5 KW DIMENSIONS: 3100 X 1600 X HEIGHT; 1420 MM WEIGHT: APPROXIMATELY 3 800 KG DEVELOPED WITH ACCESSORIES, MANUAL THE ELECTRIC CABINET WAS MODERNISED IN 2003 WITH VARIOUS ELEMENTS. THE ENGINE OF THE BACK FENCE HAS BEEN REMOVED FROM UVV REASONS, AS WELL AS THE REAR FENCE RAIL. BC7DJVZ0AB WE CAN DEMAND A SMALL GEAR MOTOR AND A RAIL TO SELF CULTIVATION OF THE BUYER PROVIDE AGAINST THE BACK FENCE, WITHOUT WARRANTY. DISCUSS DETAILS WITH MR DIETER STUMPF. SALE TAKES PLACE IN THE PRESENT USED CONDITION WITHOUT ANY WARRANTY. THE SCISSORS IS SEDUCIBLE IN THE CAMP.
Vendedor: Maschinen Stumpf GmbH
Año de construcción: usado
Ubicación: Land-sheet width - max.: 1000 mm<br/>coil weight: 5,00 t<br/>coil internal dia.: 460 - 500 mm<br/>coil external diameter: max. 1200 mm<br/>material thickness: 0,35 - 2,50 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 0,90 t<br/>dimensions of the machine ca.:  m<br/>accessories:<br/>-  expanding hydraulically<br/>-  press roll hydraulically<br/>-  decoiler movable on base frame  hydraulically<br/>-  power ? auxiliary drive  4,5 kw<br/>-  coil car  hydraulically<br/>   construction  above floor<br/>-  hydraulic unit  not available <br/>  <br/><br/><br/><br/><br/> SHEET WIDTH - MAX.: 1000 MM
COIL WEIGHT: 5,00 T
COIL INTERNAL DIA.: 460 - 500 MM
COIL EXTERNAL DIAMETER: MAX. 1200 MM
MATERIAL THICKNESS: 0,35 - 2,50 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 0,90 T
DIMENSIONS OF THE MACHINE CA.: M
ACCESSORIES:
- EXPANDING HYDRAULICALLY
- PRESS ROLL HYDRAULICALLY
- DECOILER MOVABLE ON BASE FRAME HYDRAULICALLY
- POWER ? AUXILIARY DRIVE 4,5 KW
- COIL CAR HYDRAULICALLY
CONSTRUCTION ABOVE FLOOR
- HYDRAULIC UNIT NOT AVAILABLE





Vendedor: Frech GmbH
Año de construcción: usado
Precio: 8.750 €
Ubicación: Land-guillotine shears strojarne piesok ntc 2500/4 produced in 1986 in czechoslovakia.

characteristic data of guillotine strojarne piesok ntc 4 x 2500:
- minimum thickness of cut sheet: 0.6 mm
- maximum thickness of cut sheet (rm = 450 mpa): 4 mm
- maximum width of cut sheet: 2500 mm
- cutting angle: 1'33 grad
- cutting angle: adjustable
- reach of stands: 200 mm
- adjustment range of the rear bumper: 4-750 mm
- main drive motor power: 4 kw
- power of the rear bumper engine: 0.25 kw
- infeed of bumpers: electric
- dimensions of the machine (length x width x height): 3100 x 1600 x 1500 mm
- weight: 3800 kg
  GUILLOTINE SHEARS STROJARNE PIESOK NTC 2500/4 PRODUCED IN 1986 IN CZECHOSLOVAKIA. CHARACTERISTIC DATA OF GUILLOTINE STROJARNE PIESOK NTC 4 X 2500: - MINIMUM THICKNESS OF CUT SHEET: 0.6 MM - MAXIMUM THICKNESS OF CUT SHEET (RM = 450 MPA): 4 MM - MAXIMUM WIDTH OF CUT SHEET: 2500 MM - CUTTING ANGLE: 1'33 GRAD - CUTTING ANGLE: ADJUSTABLE - REACH OF STANDS: 200 MM - ADJUSTMENT RANGE OF THE REAR BUMPER: 4-750 MM - MAIN DRIVE MOTOR POWER: 4 KW - POWER OF THE REAR BUMPER ENGINE: 0.25 KW - INFEED OF BUMPERS: ELECTRIC - DIMENSIONS OF THE MACHINE (LENGTH X WIDTH X HEIGHT): 3100 X 1600 X 1500 MM - WEIGHT: 3800 KG
Vendedor: MASZYNERIA SP. Z O.O.
Año de construcción: usado
Ubicación: Land-distance between columns: mm<br/>electric cabinet:vorhanden <br/>stop adjustment:0 -600 mm<br/>total power requirement:11 kw<br/>sheet width:3150 mm<br/>dimensions of the machine ca.:3800 x 2160 x 1700 mm<br/>stroke -permanent runnig:50 1/min<br/>plate thickness:6,3 mm<br/>weight of the machine ca.:9000 kg<br/>rear stop:manuell <br/>documents:vorhanden <br/><br/> DISTANCE BETWEEN COLUMNS: MM
ELECTRIC CABINET:VORHANDEN
STOP ADJUSTMENT:0 -600 MM
TOTAL POWER REQUIREMENT:11 KW
SHEET WIDTH:3150 MM
DIMENSIONS OF THE MACHINE CA.:3800 X 2160 X 1700 MM
STROKE -PERMANENT RUNNIG:50 1/MIN
PLATE THICKNESS:6,3 MM
WEIGHT OF THE MACHINE CA.:9000 KG
REAR STOP:MANUELL
DOCUMENTS:VORHANDEN

Vendedor: Pagus Maschinenhandel
Año de construcción: usado
Precio: 4.750 €
Ubicación: Land-guillotine shears strojarne piesok ntc 2500/4 czech production were produced in 1984.

characteristic data of the guillotine strojarne nies ntc 2500/4:
- cutting length: 2500 mm
- maximum thickness of cut sheet: 4 mm
- pressure of pressure: 490 mpa
- weight: 3800 kg
  GUILLOTINE SHEARS STROJARNE PIESOK NTC 2500/4 CZECH PRODUCTION WERE PRODUCED IN 1984. CHARACTERISTIC DATA OF THE GUILLOTINE STROJARNE NIES NTC 2500/4: - CUTTING LENGTH: 2500 MM - MAXIMUM THICKNESS OF CUT SHEET: 4 MM - PRESSURE OF PRESSURE: 490 MPA - WEIGHT: 3800 KG
Vendedor: MASZYNERIA SP. Z O.O.
Año de construcción: usado
Ubicación: Land-sheet width 2000 mm<br/>  plate thickness 8 mm<br/>  pre-bending 6<br/>  roll diam. toproll 300 mm<br/>  roll diam. bottom roll 280 mm<br/>  total power requirement 6 kw<br/>  weight of the machine ca. 8 t<br/>  dimensions of the machine ca. 4 x 2 x 2 m<br/>  <br/>  <br/>  mechanic machine. SHEET WIDTH 2000 MM
PLATE THICKNESS 8 MM
PRE-BENDING 6
ROLL DIAM. TOPROLL 300 MM
ROLL DIAM. BOTTOM ROLL 280 MM
TOTAL POWER REQUIREMENT 6 KW
WEIGHT OF THE MACHINE CA. 8 T
DIMENSIONS OF THE MACHINE CA. 4 X 2 X 2 M


MECHANIC MACHINE.
Vendedor: ATMH Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-technical specifications:
nominal pressing force: 1600 kn
standing in racks: 250 mm
maximum stroke: 200 mm
maximum table and bar distance: 440 mm
passage between stands: 2690 mm
free lift speed: 80 mm/s
idle stroke speed: 10 nm/s
reverse stroke speed: 110 mm/s
working table length: 3150 mm
table width: 160 mm
working height: 800 mm
reverse force: 40 kn
overall engine power: approx. 11.0 kw
total input: approx. 16.5 kva
overall dimensions: length x width x height 3350 1690 2630 mm
weight: 11.500 kg
control system: not
accessories: die m04, punch s10    TECHNICAL SPECIFICATIONS: NOMINAL PRESSING FORCE: 1600 KN STANDING IN RACKS: 250 MM MAXIMUM STROKE: 200 MM MAXIMUM TABLE AND BAR DISTANCE: 440 MM PASSAGE BETWEEN STANDS: 2690 MM FREE LIFT SPEED: 80 MM/S IDLE STROKE SPEED: 10 NM/S REVERSE STROKE SPEED: 110 MM/S WORKING TABLE LENGTH: 3150 MM TABLE WIDTH: 160 MM WORKING HEIGHT: 800 MM REVERSE FORCE: 40 KN OVERALL ENGINE POWER: APPROX. 11.0 KW TOTAL INPUT: APPROX. 16.5 KVA OVERALL DIMENSIONS: LENGTH X WIDTH X HEIGHT 3350 1690 2630 MM WEIGHT: 11.500 KG CONTROL SYSTEM: NOT ACCESSORIES: DIE M04, PUNCH S10
Vendedor: BASTA machinery
Año de construcción: usado
Ubicación: Land-noå¼yce gilotynowe cnta 3150/16a

szerokoå?ä? ciä?cia - 3150 mm
gruboå?ä? ciä?tej blachy - 16 mm. NO&ARING;&FRAC14;YCE GILOTYNOWE CNTA 3150/16A SZEROKO&ARING;?&AUML;? CI&AUML;?CIA - 3150 MM GRUBO&ARING;?&AUML;? CI&AUML;?TEJ BLACHY - 16 MM.
Vendedor: Blachmix
Año de construcción: usado
Precio: 7.350 €
Ubicación: Land-cutting thickness: 16 mm<br/>  cutting length: 3150 mm weight: 19500 kg CUTTING THICKNESS: 16 MM
CUTTING LENGTH: 3150 MM WEIGHT: 19500 KG
Vendedor: Telkes Gép GmbH
Año de construcción: usado
Ubicación: Land-make: piesok
model: gcnta 3150/16 guillotine
year: 1987
condition: used
machine type: other 
location of machine: europe

machine details
year of manufacture: 1987
3.15m x 16mm capacity
good condition
price includes loading to container.   MAKE: PIESOK MODEL: GCNTA 3150/16 GUILLOTINE YEAR: 1987 CONDITION: USED MACHINE TYPE: OTHER LOCATION OF MACHINE: EUROPE MACHINE DETAILS YEAR OF MANUFACTURE: 1987 3.15M X 16MM CAPACITY GOOD CONDITION PRICE INCLUDES LOADING TO CONTAINER.
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land-the machine is in good technical condition  THE MACHINE IS IN GOOD TECHNICAL CONDITION
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-working width: 2,500 mm
maximum sheet thickness: 4.0 mm
adjustment of backgauge 4-750 mm
gap  200 mm
cutting angle 1.33 °
power of main motor 5.5 kw
length approx.                                           3260 mm
width approx.                                           1600 mm
height approx.                                            1520 mm
weight 3800 kg 

motoric back gauge
front arms
cut counter
foot switch
pneumatic sheet scotch WORKING WIDTH: 2,500 MM MAXIMUM SHEET THICKNESS: 4.0 MM ADJUSTMENT OF BACKGAUGE 4-750 MM GAP 200 MM CUTTING ANGLE 1.33 ° POWER OF MAIN MOTOR 5.5 KW LENGTH APPROX. 3260 MM WIDTH APPROX. 1600 MM HEIGHT APPROX. 1520 MM WEIGHT 3800 KG MOTORIC BACK GAUGE FRONT ARMS CUT COUNTER FOOT SWITCH PNEUMATIC SHEET SCOTCH
Vendedor: Norbert Gottwald Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-maximum thickness: 16 mm	
engine power: 24 kw	
machine dimensions:	
240 x 2520 x 2570 mm	
machine weight: 16300 kg MAXIMUM THICKNESS: 16 MM ENGINE POWER: 24 KW MACHINE DIMENSIONS: 240 X 2520 X 2570 MM MACHINE WEIGHT: 16300 KG
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-guillotine shear piesok nth 3150 / 16
hydraulic shear
yom 1977.
cutting length 3150 mm
max. cutting thickness 16 mm
motor 40 hp
dismantled 2 months ago.
blades/knives available, spare knives as well.
electrical cabinet stored in production hall, the machine itself outside, covered by tarpaulin.
no missing parts.
   GUILLOTINE SHEAR PIESOK NTH 3150 / 16 HYDRAULIC SHEAR YOM 1977. CUTTING LENGTH 3150 MM MAX. CUTTING THICKNESS 16 MM MOTOR 40 HP DISMANTLED 2 MONTHS AGO. BLADES/KNIVES AVAILABLE, SPARE KNIVES AS WELL. ELECTRICAL CABINET STORED IN PRODUCTION HALL, THE MACHINE ITSELF OUTSIDE, COVERED BY TARPAULIN. NO MISSING PARTS.
Vendedor: MachTechnica Ltd.
Año de construcción: usado
Ubicación: Land-bending length : 3000 mm	
nominal force : 80 t	
engine power : 10 kw	
machine dimensions	
( l x w x h ): 2500 x 2385 x 1250 mm	
machine weight : 6100 kg	
repairs 2018:	
(tool -cylinder )	
 BENDING LENGTH : 3000 MM NOMINAL FORCE : 80 T ENGINE POWER : 10 KW MACHINE DIMENSIONS ( L X W X H ): 2500 X 2385 X 1250 MM MACHINE WEIGHT : 6100 KG REPAIRS 2018: (TOOL -CYLINDER )
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-guillotine shear, strojarne piesok nte 2000/ 6,3e, hydraulic
yom 1987
machine weight 6725 kg
max. cutting length 2000 mm
max. plate thickness 6,3 mm
min. sheet thickness 0,6 mm GUILLOTINE SHEAR, STROJARNE PIESOK NTE 2000/ 6,3E, HYDRAULIC YOM 1987 MACHINE WEIGHT 6725 KG MAX. CUTTING LENGTH 2000 MM MAX. PLATE THICKNESS 6,3 MM MIN. SHEET THICKNESS 0,6 MM
Vendedor: MachTechnica Ltd.
Año de construcción: usado
Ubicación: Land-
-yom 1988  
- sheet width: 2000 mm 
- max. the wrapping sheet thickness: 12 mm 
- number of rolls: 3 
- max. pre-bent sheet thickness: 18 mm 
- engine power: 22 kw 
- machine dimensions: 5300 x 1600 x 1850 mm 
- machine weight: 15800 kg
 -YOM 1988 - SHEET WIDTH: 2000 MM - MAX. THE WRAPPING SHEET THICKNESS: 12 MM - NUMBER OF ROLLS: 3 - MAX. PRE-BENT SHEET THICKNESS: 18 MM - ENGINE POWER: 22 KW - MACHINE DIMENSIONS: 5300 X 1600 X 1850 MM - MACHINE WEIGHT: 15800 KG
Vendedor: MUDAR-M LTD.
Año de construcción: usado
Ubicación: Land-side rolls dia. 340mm

upper and lower rolls dia. 430mm

max. bending width:3000mm

max. thickness for bending: 25mm

thickness for prebending: 18mm

main motor power: 30kw

machine weight ca. 36ton    SIDE ROLLS DIA. 340MM UPPER AND LOWER ROLLS DIA. 430MM MAX. BENDING WIDTH:3000MM MAX. THICKNESS FOR BENDING: 25MM THICKNESS FOR PREBENDING: 18MM MAIN MOTOR POWER: 30KW MACHINE WEIGHT CA. 36TON
Vendedor: usedmachines
Año de construcción: usado
Precio: 23.000 €
Ubicación: Land-year 1996, ce norm, complete instructions, control delem, machine in top condition with warranty, more details on request YEAR 1996, CE NORM, COMPLETE INSTRUCTIONS, CONTROL DELEM, MACHINE IN TOP CONDITION WITH WARRANTY, MORE DETAILS ON REQUEST
Vendedor: FORMEX SK s.r.o.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more PIESOK types: