250 ofertas

Año de construcción: usado
Precio: 15.000 €
Ubicación: Land-photocells
program
air table
spare knife
new led screen
very good condition
 PHOTOCELLS PROGRAM AIR TABLE SPARE KNIFE NEW LED SCREEN VERY GOOD CONDITION
Vendedor: 4print
Año de construcción: usado
Precio: used machinery auction RESALE 1.340 €
Ubicación: Land-weight approx.: 400 kg<br/>dimensions (l x w x h) approx.: 1600 x 800 x 1100 mm<br/>description: cma ghr-60 threading machine<br> <br> electric motor 5,5 ps, recommended max. pressure 120 bar, safety valve set to 140 bar, min. threading capacity m-6, max. speed cutting capacity m-60, 250 / 50 rpm, oil tank capacity 35 l, connection polarity 380 v/3 ph, control polarity 24 v, effective radius of action over 360° 1,800 mm WEIGHT APPROX.: 400 KG
DIMENSIONS (L X W X H) APPROX.: 1600 X 800 X 1100 MM
DESCRIPTION: CMA GHR-60 THREADING MACHINE

ELECTRIC MOTOR 5,5 PS, RECOMMENDED MAX. PRESSURE 120 BAR, SAFETY VALVE SET TO 140 BAR, MIN. THREADING CAPACITY M-6, MAX. SPEED CUTTING CAPACITY M-60, 250 / 50 RPM, OIL TANK CAPACITY 35 L, CONNECTION POLARITY 380 V/3 PH, CONTROL POLARITY 24 V, EFFECTIVE RADIUS OF ACTION OVER 360° 1,800 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-built in 2008
cutting length: 115 cm
loading height: 16.5 cm
program
touch screen
chrome-plated air table
spare knife, tools, and documentation   BUILT IN 2008 CUTTING LENGTH: 115 CM LOADING HEIGHT: 16.5 CM PROGRAM TOUCH SCREEN CHROME-PLATED AIR TABLE SPARE KNIFE, TOOLS, AND DOCUMENTATION
Vendedor: Serin Graphische Maschinen
Año de construcción: usado
Precio: 340.580 €
Ubicación: Land-: 3.100 x 1.550 mm<br/>: 1.070 - 1.080 nm<br/>: 5,0 khz<br/>: 33 kwh<br/>: 16 mm<br/>: 8 mm<br/>: 8 mm<br/>: 3.100 mm<br/>: 1.550 mm<br/>: 125 mm<br/>: 3.000 x 1.500 mm<br/>: 1.000 kg<br/>: 9.000 x 7.500 mm<br/>: 6.300 mm<br/>: 4.860 mm<br/>: 2.300 mm<br/>: 9.000 kg<br/>fiber laser hesse hd-fs made by durma<br/><br/>when the requirement is to laser cut with high performance and precision, though the available space is limited, it is a task for the model hd-fs. the control unit is integrated in the machine to keep the overall dimensions as low as possible. the table can be manually pulled out on the side of the machine to load and unload it.<br/><br/>the laser power source (resonator) of the hdfl series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/> <br/>the machine consists of the following components:<br/><br/>capsuled cutting room with safety glass<br/>lateral shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time<br/>cnc control siemens sinumerik with grafic display (made in germany!)<br/>- technology and cutting parameter data bank with presettings for common metals<br/>laser source i.p.g 4000 (made in germany!)<br/>autofocus-cutting head precitec with integrated and adjusted sensor technics and mororized focus position adjustment (made in germany!) <br/>liquid cooler for cutting head and resonator<br/>cad/cam software lantek to program and optimize utilization of material (nesting)<br/>remote maintenance by lan connection<br/>safety light barrier covering<br/>laser service set<br/><br/>options:<br/><br/>exhaust unit with filters   ? 12.460,-<br/><br/>scrap conveyor for small parts and waste   ? 5.750,-<br/><br/><br/>(video shows mod. hd-fl with linear motors, model generation 2014)<br/><br/><br/><br/>fiber laser hesse hd-fs made by durma<br/><br/>when the requirement is to laser cut with high performance and precision, though the available space is limited, it is a task for the model hd-fs. the control unit is integrated in the machine to keep the overall dimensions as low as possible. the table can be manually pulled out on the side of the machine to load and unload it.<br/><br/>the laser power source (resonator) of the hdfl series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/> <br/>the machine consists of the following components:<br/><br/>capsuled cutting room with safety glass<br/>lateral shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time<br/>cnc control siemens sinumerik with grafic display (made in germany!)<br/>- technology and cutting parameter data bank with presettings for common metals<br/>laser source i.p.g 2000 (made in germany!)<br/>autofocus-cutting head precitec with integrated and adjusted sensor technics and mororized focus position adjustment (made in germany!) <br/>liquid cooler for cutting head and resonator<br/>cad/cam software lantek to program and optimize utilization of material (nesting)<br/>remote maintenance by lan connection<br/>laser service set<br/><br/><br/><br/>cutting area: 3.100 x 1.550 mm <br/>laser power: 0,4 - 4,0 kw <br/>wavelength: 1.070 - 1.080 nm <br/>polarization: random <br/>max. pulse frequency: 5,0 khz <br/>average power consumption: 33 kwh <br/>application range:  <br/>mild steel: 16 mm <br/>stainless steel: 8 mm <br/>aluminium: 8 mm <br/>working ange:  <br/>x-axis: 3.100 mm <br/>y-axis: 1.550 mm <br/>z-axis: 125 mm<br/>max. sheet size: 3.000 x 1.500 mm<br/>max. sheet weight: 1.000 kg<br/>dynamic and precision:  <br/>max speed x-axes: 90 m/min<br/>max speed y-axes: 90 m/min<br/>max. spped simultaneous: 127 m/min<br/>max. acceleration: 10 m/s² <br/>positional accuracy: +/- 0,05 mm <br/>repeatability: +/- 0,05 mm <br/>dimensions:  <br/>lay-out area ca.: 9.000 x 7.500 mm<br/>length: 6.300 mm<br/>width: 4.860 mm<br/>height: 2.300 mm<br/>weight ca.: 9.000 kg<br/><br/><br/><br/> : 3.100 X 1.550 MM
: 1.070 - 1.080 NM
: 5,0 KHZ
: 33 KWH
: 16 MM
: 8 MM
: 8 MM
: 3.100 MM
: 1.550 MM
: 125 MM
: 3.000 X 1.500 MM
: 1.000 KG
: 9.000 X 7.500 MM
: 6.300 MM
: 4.860 MM
: 2.300 MM
: 9.000 KG
FIBER LASER HESSE HD-FS MADE BY DURMA

WHEN THE REQUIREMENT IS TO LASER CUT WITH HIGH PERFORMANCE AND PRECISION, THOUGH THE AVAILABLE SPACE IS LIMITED, IT IS A TASK FOR THE MODEL HD-FS. THE CONTROL UNIT IS INTEGRATED IN THE MACHINE TO KEEP THE OVERALL DIMENSIONS AS LOW AS POSSIBLE. THE TABLE CAN BE MANUALLY PULLED OUT ON THE SIDE OF THE MACHINE TO LOAD AND UNLOAD IT.

THE LASER POWER SOURCE (RESONATOR) OF THE HDFL SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.

THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

CAPSULED CUTTING ROOM WITH SAFETY GLASS
LATERAL SHUTTLE TABLE FOR SIMULTANEOUS LOADING/UNLOADING AND CUTTING TO REDUCE THE SECONDARY PROCESSING TIME
CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
- TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
LASER SOURCE I.P.G 4000 (MADE IN GERMANY!)
AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND MORORIZED FOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
REMOTE MAINTENANCE BY LAN CONNECTION
SAFETY LIGHT BARRIER COVERING
LASER SERVICE SET

OPTIONS:

EXHAUST UNIT WITH FILTERS   ? 12.460,-

SCRAP CONVEYOR FOR SMALL PARTS AND WASTE   ? 5.750,-


(VIDEO SHOWS MOD. HD-FL WITH LINEAR MOTORS, MODEL GENERATION 2014)



FIBER LASER HESSE HD-FS MADE BY DURMA

WHEN THE REQUIREMENT IS TO LASER CUT WITH HIGH PERFORMANCE AND PRECISION, THOUGH THE AVAILABLE SPACE IS LIMITED, IT IS A TASK FOR THE MODEL HD-FS. THE CONTROL UNIT IS INTEGRATED IN THE MACHINE TO KEEP THE OVERALL DIMENSIONS AS LOW AS POSSIBLE. THE TABLE CAN BE MANUALLY PULLED OUT ON THE SIDE OF THE MACHINE TO LOAD AND UNLOAD IT.

THE LASER POWER SOURCE (RESONATOR) OF THE HDFL SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.

THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

CAPSULED CUTTING ROOM WITH SAFETY GLASS
LATERAL SHUTTLE TABLE FOR SIMULTANEOUS LOADING/UNLOADING AND CUTTING TO REDUCE THE SECONDARY PROCESSING TIME
CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
- TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
LASER SOURCE I.P.G 2000 (MADE IN GERMANY!)
AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND MORORIZED FOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
REMOTE MAINTENANCE BY LAN CONNECTION
LASER SERVICE SET



CUTTING AREA: 3.100 X 1.550 MM
LASER POWER: 0,4 - 4,0 KW
WAVELENGTH: 1.070 - 1.080 NM
POLARIZATION: RANDOM
MAX. PULSE FREQUENCY: 5,0 KHZ
AVERAGE POWER CONSUMPTION: 33 KWH
APPLICATION RANGE:
MILD STEEL: 16 MM
STAINLESS STEEL: 8 MM
ALUMINIUM: 8 MM
WORKING ANGE:
X-AXIS: 3.100 MM
Y-AXIS: 1.550 MM
Z-AXIS: 125 MM
MAX. SHEET SIZE: 3.000 X 1.500 MM
MAX. SHEET WEIGHT: 1.000 KG
DYNAMIC AND PRECISION:
MAX SPEED X-AXES: 90 M/MIN
MAX SPEED Y-AXES: 90 M/MIN
MAX. SPPED SIMULTANEOUS: 127 M/MIN
MAX. ACCELERATION: 10 M/S²
POSITIONAL ACCURACY: +/- 0,05 MM
REPEATABILITY: +/- 0,05 MM
DIMENSIONS:
LAY-OUT AREA CA.: 9.000 X 7.500 MM
LENGTH: 6.300 MM
WIDTH: 4.860 MM
HEIGHT: 2.300 MM
WEIGHT CA.: 9.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-digital program
central air bed
2 side tables 
light guards
2 knives
cleaned and checked DIGITAL PROGRAM CENTRAL AIR BED 2 SIDE TABLES LIGHT GUARDS 2 KNIVES CLEANED AND CHECKED
Vendedor: ICD
Año de construcción: usado
Precio: 276.450 €
Ubicación: Land-: 3.060 x 1.530 mm<br/>: 1.070 - 1.080 nm<br/>: 5,0 khz<br/>: 25 kwh<br/>: 12 mm<br/>: 6 mm<br/>: 6 mm<br/>: 3.060 mm<br/>: 1.530 mm<br/>: 160 mm<br/>: 3.000 x 1.500 mm<br/>: 1.000 kg<br/>: 11.000 x 6.000 mm<br/>: 9.440 mm<br/>: 2.750 mm<br/>: 2.420 mm<br/>: 12.000 kg<br/>fiber laser hesse hd-f made by durma<br/><br/>the laser power source (resonator) of the hdf series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/><br/><br/>the machine consists of the following components:<br/><br/>capsuled cutting room with safety glass<br/>-x-axis with massive gantry-drive by rack and pinion<br/>-y-axis by rack and pinion <br/>shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time<br/>cnc control siemens sinumerik with grafic display (made in germany!)<br/>- technology and cutting parameter data bank with presettings for common metals<br/>laser source i.p.g. 2000 (made in germany!)<br/>autofocus-cutting head precitec with integrated and adjusted sensor technics and mororized focus position adjustment (made in germany!) <br/>liquid cooler for cutting head and resonator<br/>cad/cam software lantek to program and optimize utilization of material (nesting)<br/>remote maintenance by lan connection<br/>safety light barrier covering<br/>laser service set<br/><br/>options:<br/><br/>exhaust unit with filters   ? 12.460,--<br/><br/>scrap conveyor for small parts and waste   ? 5.750,--<br/><br/><br/>(video shows mod. hd-fl with linear motors, model generation 2014)<br/><br/><br/><br/><br/>cutting area: 3.060 x 1.530 mm <br/>laser power: 0,2 - 2,0 kw <br/>wavelength: 1.070 - 1.080 nm <br/>polarization: random <br/>max. pulse frequency: 5,0 khz <br/>average power consumption: 25 kwh <br/>application range:  <br/>mild steel: 12 mm <br/>stainless steel: 6 mm <br/>aluminium: 6 mm  <br/>working ange:  <br/>x-axis: 3.060 mm <br/>y-axis: 1.530 mm <br/>z-axis: 160 mm<br/>max. sheet size: 3.000 x 1.500 mm<br/>max. sheet weight: 1.000 kg<br/>dynamic and precision:  <br/>max speed x-axes: 120 m/min<br/>max speed y-axes: 120 m/min<br/>max. spped simultaneous: 170 m/min <br/>max. acceleration: 20 m/s² <br/>positional accuracy: +/- 0,05 mm <br/>repeatability: +/- 0,05 mm <br/>lay-out area ca.: 11.000 x 6.000 mm<br/>length: 9.440 mm<br/>width: 2.750 mm<br/>height: 2.420 mm<br/>weight ca.: 12.000 kg<br/><br/><br/><br/> : 3.060 X 1.530 MM
: 1.070 - 1.080 NM
: 5,0 KHZ
: 25 KWH
: 12 MM
: 6 MM
: 6 MM
: 3.060 MM
: 1.530 MM
: 160 MM
: 3.000 X 1.500 MM
: 1.000 KG
: 11.000 X 6.000 MM
: 9.440 MM
: 2.750 MM
: 2.420 MM
: 12.000 KG
FIBER LASER HESSE HD-F MADE BY DURMA

THE LASER POWER SOURCE (RESONATOR) OF THE HDF SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.


THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

CAPSULED CUTTING ROOM WITH SAFETY GLASS
-X-AXIS WITH MASSIVE GANTRY-DRIVE BY RACK AND PINION
-Y-AXIS BY RACK AND PINION
SHUTTLE TABLE FOR SIMULTANEOUS LOADING/UNLOADING AND CUTTING TO REDUCE THE SECONDARY PROCESSING TIME
CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
- TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
LASER SOURCE I.P.G. 2000 (MADE IN GERMANY!)
AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND MORORIZED FOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
REMOTE MAINTENANCE BY LAN CONNECTION
SAFETY LIGHT BARRIER COVERING
LASER SERVICE SET

OPTIONS:

EXHAUST UNIT WITH FILTERS   ? 12.460,--

SCRAP CONVEYOR FOR SMALL PARTS AND WASTE   ? 5.750,--


(VIDEO SHOWS MOD. HD-FL WITH LINEAR MOTORS, MODEL GENERATION 2014)




CUTTING AREA: 3.060 X 1.530 MM
LASER POWER: 0,2 - 2,0 KW
WAVELENGTH: 1.070 - 1.080 NM
POLARIZATION: RANDOM
MAX. PULSE FREQUENCY: 5,0 KHZ
AVERAGE POWER CONSUMPTION: 25 KWH
APPLICATION RANGE:
MILD STEEL: 12 MM
STAINLESS STEEL: 6 MM
ALUMINIUM: 6 MM
WORKING ANGE:
X-AXIS: 3.060 MM
Y-AXIS: 1.530 MM
Z-AXIS: 160 MM
MAX. SHEET SIZE: 3.000 X 1.500 MM
MAX. SHEET WEIGHT: 1.000 KG
DYNAMIC AND PRECISION:
MAX SPEED X-AXES: 120 M/MIN
MAX SPEED Y-AXES: 120 M/MIN
MAX. SPPED SIMULTANEOUS: 170 M/MIN
MAX. ACCELERATION: 20 M/S²
POSITIONAL ACCURACY: +/- 0,05 MM
REPEATABILITY: +/- 0,05 MM
LAY-OUT AREA CA.: 11.000 X 6.000 MM
LENGTH: 9.440 MM
WIDTH: 2.750 MM
HEIGHT: 2.420 MM
WEIGHT CA.: 12.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-digital program
tft monitor
central air bed
2 side tables 
light guards
2 knives
cleaned and checked DIGITAL PROGRAM TFT MONITOR CENTRAL AIR BED 2 SIDE TABLES LIGHT GUARDS 2 KNIVES CLEANED AND CHECKED
Vendedor: ICD
Año de construcción: usado
Precio: 399.090 €
Ubicación: Land-: 3.060 x 1.530 mm<br/>: 1.070 - 1.080 nm<br/>: 5,0 khz<br/>: 53 kwh<br/>: 20 mm<br/>: 10 mm<br/>: 12 mm<br/>: 3.060 mm<br/>: 1.530 mm<br/>: 160 mm<br/>: 3.000 x 1.500 mm<br/>: 1.000 kg<br/>: 11.000 x 6.000 mm<br/>: 9.440 mm<br/>: 2.750 mm<br/>: 2.420 mm<br/>: 12.000 kg<br/>faserlaser hesse hd-fl made by durma<br/><br/>the laser power source (resonator) of the hdfl series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/><br/><br/><br/>the machine consists of the following components:<br/><br/>capsuled cutting room with safety glass<br/>-x-axis with massive gantry-drive by siemens linear motors<br/>-y-axis by siemens linear motors<br/>shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time<br/>cnc control siemens sinumerik with grafic display (made in germany!)<br/>- technology and cutting parameter data bank with presettings for common metals<br/>laser source i.p.g. 4000 (made in germany!)<br/>autofocus-cutting head precitec with integrated and adjusted sensor technics and mororized focus position adjustment (made in germany!) <br/>liquid cooler for cutting head and resonator<br/>liquid cooler for linear motors<br/>cad/cam software lantek to program and optimize utilization of material (nesting)<br/>remote maintenance by lan connection and wlan<br/>safety light barrier covering<br/>laser service set<br/><br/>options:<br/><br/>exhaust unit with filters ? 12.460,-<br/><br/>scrap conveyor for small parts and waste ? 5.750,-<br/><br/><br/><br/>(video shows model generation 2014)<br/><br/><br/><br/><br/>cutting area: 3.060 x 1.530 mm<br/>laser power: 0,4 - 4,0 kw<br/>wavelength: 1.070 - 1.080 nm<br/>polarization: random<br/>max. pulse frequency: 5,0 khz<br/>average power consumption: 53 kwh<br/>application range:<br/>mild steel: 20 mm<br/>stainless steel: 10 mm<br/>aluminium: 12 mm<br/>copper: 6 mm<br/>brass: 10 mm<br/>working ange:<br/>x-axis: 3.060 mm<br/>y-axis: 1.530 mm<br/>z-axis: 160 mm<br/>max. sheet size: 3.000 x 1.500 mm<br/>max. sheet weight: 1.000 kg<br/>dynamic and precision:<br/>max speed x- and y- axes: 160 m/min<br/>max. spped simultaneous: 226 m/min<br/>max. acceleration: 25 m/s²<br/>positional accuracy: +/- 0,03 mm<br/>repeatability: +/- 0,03 mm<br/>lay-out area ca.: 11.000 x 6.000 mm<br/>length: 9.440 mm<br/>width: 2.750 mm<br/>height: 2.420 mm<br/>weight ca.: 12.000 kg<br/><br/><br/><br/> : 3.060 X 1.530 MM
: 1.070 - 1.080 NM
: 5,0 KHZ
: 53 KWH
: 20 MM
: 10 MM
: 12 MM
: 3.060 MM
: 1.530 MM
: 160 MM
: 3.000 X 1.500 MM
: 1.000 KG
: 11.000 X 6.000 MM
: 9.440 MM
: 2.750 MM
: 2.420 MM
: 12.000 KG
FASERLASER HESSE HD-FL MADE BY DURMA

THE LASER POWER SOURCE (RESONATOR) OF THE HDFL SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.



THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

CAPSULED CUTTING ROOM WITH SAFETY GLASS
-X-AXIS WITH MASSIVE GANTRY-DRIVE BY SIEMENS LINEAR MOTORS
-Y-AXIS BY SIEMENS LINEAR MOTORS
SHUTTLE TABLE FOR SIMULTANEOUS LOADING/UNLOADING AND CUTTING TO REDUCE THE SECONDARY PROCESSING TIME
CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
- TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
LASER SOURCE I.P.G. 4000 (MADE IN GERMANY!)
AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND MORORIZED FOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
LIQUID COOLER FOR LINEAR MOTORS
CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
REMOTE MAINTENANCE BY LAN CONNECTION AND WLAN
SAFETY LIGHT BARRIER COVERING
LASER SERVICE SET

OPTIONS:

EXHAUST UNIT WITH FILTERS ? 12.460,-

SCRAP CONVEYOR FOR SMALL PARTS AND WASTE ? 5.750,-



(VIDEO SHOWS MODEL GENERATION 2014)




CUTTING AREA: 3.060 X 1.530 MM
LASER POWER: 0,4 - 4,0 KW
WAVELENGTH: 1.070 - 1.080 NM
POLARIZATION: RANDOM
MAX. PULSE FREQUENCY: 5,0 KHZ
AVERAGE POWER CONSUMPTION: 53 KWH
APPLICATION RANGE:
MILD STEEL: 20 MM
STAINLESS STEEL: 10 MM
ALUMINIUM: 12 MM
COPPER: 6 MM
BRASS: 10 MM
WORKING ANGE:
X-AXIS: 3.060 MM
Y-AXIS: 1.530 MM
Z-AXIS: 160 MM
MAX. SHEET SIZE: 3.000 X 1.500 MM
MAX. SHEET WEIGHT: 1.000 KG
DYNAMIC AND PRECISION:
MAX SPEED X- AND Y- AXES: 160 M/MIN
MAX. SPPED SIMULTANEOUS: 226 M/MIN
MAX. ACCELERATION: 25 M/S²
POSITIONAL ACCURACY: +/- 0,03 MM
REPEATABILITY: +/- 0,03 MM
LAY-OUT AREA CA.: 11.000 X 6.000 MM
LENGTH: 9.440 MM
WIDTH: 2.750 MM
HEIGHT: 2.420 MM
WEIGHT CA.: 12.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-injection molding machine husky hylectric h300 for pet bottle closures
 
two complete pet bottle cap production lines both equipped with husky hylectric h300 injection molding machines. both production lines include italian plastic systems made granule pneumatic transport, mixing and feeding systems as well as green box made cap cooling drums. equipment was manufactured in year 2006 is designed to produce 28 mm pet caps according to standard light bpf 28 mm at speed of 36 000 caps / hour. both machines were stopped in 2014 but are still installed and powered.
 
technical data
 
machine #1 type: husky h300, rs95/80, ser. ?2853225
manufacturing year 2006, total operating hours 44918
mold no1 corvaglia 64 cavity no 28-22-21-1 air cooled

machine #2 type: husky h300, rs80/70, ser. ?3372564
manufacturing year 2006, total operating hours 57790
mold no 2 corvaglia 64 cavity no 103-a-st water cooled

cap format bpf 28 mm
cycle time: 6.3 seconds
capacity 36 000 cap / h
control system: beckfoff industrial pc
mmi polaris ttc 2100 with touch screen   INJECTION MOLDING MACHINE HUSKY HYLECTRIC H300 FOR PET BOTTLE CLOSURES TWO COMPLETE PET BOTTLE CAP PRODUCTION LINES BOTH EQUIPPED WITH HUSKY HYLECTRIC H300 INJECTION MOLDING MACHINES. BOTH PRODUCTION LINES INCLUDE ITALIAN PLASTIC SYSTEMS MADE GRANULE PNEUMATIC TRANSPORT, MIXING AND FEEDING SYSTEMS AS WELL AS GREEN BOX MADE CAP COOLING DRUMS. EQUIPMENT WAS MANUFACTURED IN YEAR 2006 IS DESIGNED TO PRODUCE 28 MM PET CAPS ACCORDING TO STANDARD LIGHT BPF 28 MM AT SPEED OF 36 000 CAPS / HOUR. BOTH MACHINES WERE STOPPED IN 2014 BUT ARE STILL INSTALLED AND POWERED. TECHNICAL DATA MACHINE #1 TYPE: HUSKY H300, RS95/80, SER. ?2853225 MANUFACTURING YEAR 2006, TOTAL OPERATING HOURS 44918 MOLD NO1 CORVAGLIA 64 CAVITY NO 28-22-21-1 AIR COOLED MACHINE #2 TYPE: HUSKY H300, RS80/70, SER. ?3372564 MANUFACTURING YEAR 2006, TOTAL OPERATING HOURS 57790 MOLD NO 2 CORVAGLIA 64 CAVITY NO 103-A-ST WATER COOLED CAP FORMAT BPF 28 MM CYCLE TIME: 6.3 SECONDS CAPACITY 36 000 CAP / H CONTROL SYSTEM: BECKFOFF INDUSTRIAL PC MMI POLARIS TTC 2100 WITH TOUCH SCREEN
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 324.360 €
Ubicación: Land-: 3.060 x 1.530 mm<br/>: 1.070 - 1.080 nm<br/>: 5,0 khz<br/>: 45 kwh<br/>: 12 mm<br/>: 6 mm<br/>: 6 mm<br/>: 3.060 mm<br/>: 1.530 mm<br/>: 160 mm<br/>: 3.000 x 1.500 mm<br/>: 1.000 kg<br/>: 11.000 x 6.000 mm<br/>: 9.440 mm<br/>: 2.750 mm<br/>: 2.420 mm<br/>: 12.000 kg<br/>fiber laser hesse hd-fl made by durma<br/><br/>the laser power source (resonator) of the hdfl series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/><br/><br/><br/>the machine consists of the following components:<br/><br/>capsuled cutting room with safety glass<br/>-x-axis with massive gantry-drive by siemens linear motors<br/>-y-axis by siemens linear motors<br/>shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time<br/>cnc control siemens sinumerik with grafic display (made in germany!)<br/>- technology and cutting parameter data bank with presettings for common metals<br/>laser source i.p.g. 2000 (made in germany!)<br/>autofocus-cutting head precitec with integrated and adjusted sensor technics and mororized focus position adjustment (made in germany!) <br/>liquid cooler for cutting head and resonator<br/>liquid cooler for linear motors<br/>cad/cam software lantek to program and optimize utilization of material (nesting)<br/>remote maintenance by lan connection<br/>safety light barrier covering<br/>laser service set<br/><br/>options:<br/><br/>exhaust unit with filters ? 12.460,--<br/><br/>scrap conveyor for small parts and waste ? 5.750,--<br/><br/><br/>(video shows model generation 2014)<br/><br/><br/><br/><br/>cutting area: 3.060 x 1.530 mm<br/>laser power: 0,2 - 2,0 kw<br/>wavelength: 1.070 - 1.080 nm<br/>polarization: random<br/>max. pulse frequency: 5,0 khz<br/>average power consumption: 45 kwh<br/>application range:<br/>mild steel: 12 mm<br/>stainless steel: 6 mm<br/>aluminium: 6 mm<br/>copper: 3 mm<br/>brass: 6 mm<br/>working ange:<br/>x-axis: 3.060 mm<br/>y-axis: 1.530 mm<br/>z-axis: 160 mm<br/>max. sheet size: 3.000 x 1.500 mm<br/>max. sheet weight: 1.000 kg<br/>dynamic and precision:<br/>max speed x- and y- axes: 160 m/min<br/>max. spped simultaneous: 226 m/min<br/>max. acceleration: 25 m/s²<br/>positional accuracy: +/- 0,03 mm<br/>repeatability: +/- 0,03 mm<br/>lay-out area ca.: 11.000 x 6.000 mm<br/>length: 9.440 mm<br/>width: 2.750 mm<br/>height: 2.420 mm<br/>weight ca.: 12.000 kg<br/><br/><br/><br/> : 3.060 X 1.530 MM
: 1.070 - 1.080 NM
: 5,0 KHZ
: 45 KWH
: 12 MM
: 6 MM
: 6 MM
: 3.060 MM
: 1.530 MM
: 160 MM
: 3.000 X 1.500 MM
: 1.000 KG
: 11.000 X 6.000 MM
: 9.440 MM
: 2.750 MM
: 2.420 MM
: 12.000 KG
FIBER LASER HESSE HD-FL MADE BY DURMA

THE LASER POWER SOURCE (RESONATOR) OF THE HDFL SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.



THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

CAPSULED CUTTING ROOM WITH SAFETY GLASS
-X-AXIS WITH MASSIVE GANTRY-DRIVE BY SIEMENS LINEAR MOTORS
-Y-AXIS BY SIEMENS LINEAR MOTORS
SHUTTLE TABLE FOR SIMULTANEOUS LOADING/UNLOADING AND CUTTING TO REDUCE THE SECONDARY PROCESSING TIME
CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
- TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
LASER SOURCE I.P.G. 2000 (MADE IN GERMANY!)
AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND MORORIZED FOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
LIQUID COOLER FOR LINEAR MOTORS
CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
REMOTE MAINTENANCE BY LAN CONNECTION
SAFETY LIGHT BARRIER COVERING
LASER SERVICE SET

OPTIONS:

EXHAUST UNIT WITH FILTERS ? 12.460,--

SCRAP CONVEYOR FOR SMALL PARTS AND WASTE ? 5.750,--


(VIDEO SHOWS MODEL GENERATION 2014)




CUTTING AREA: 3.060 X 1.530 MM
LASER POWER: 0,2 - 2,0 KW
WAVELENGTH: 1.070 - 1.080 NM
POLARIZATION: RANDOM
MAX. PULSE FREQUENCY: 5,0 KHZ
AVERAGE POWER CONSUMPTION: 45 KWH
APPLICATION RANGE:
MILD STEEL: 12 MM
STAINLESS STEEL: 6 MM
ALUMINIUM: 6 MM
COPPER: 3 MM
BRASS: 6 MM
WORKING ANGE:
X-AXIS: 3.060 MM
Y-AXIS: 1.530 MM
Z-AXIS: 160 MM
MAX. SHEET SIZE: 3.000 X 1.500 MM
MAX. SHEET WEIGHT: 1.000 KG
DYNAMIC AND PRECISION:
MAX SPEED X- AND Y- AXES: 160 M/MIN
MAX. SPPED SIMULTANEOUS: 226 M/MIN
MAX. ACCELERATION: 25 M/S²
POSITIONAL ACCURACY: +/- 0,03 MM
REPEATABILITY: +/- 0,03 MM
LAY-OUT AREA CA.: 11.000 X 6.000 MM
LENGTH: 9.440 MM
WIDTH: 2.750 MM
HEIGHT: 2.420 MM
WEIGHT CA.: 12.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-power: 5 ps
format (cm):				78
insert height (cm): 			12
insertion depth (cm): 			78
residual cut (cm): 			1.5
hydraulic operating pressure (bar): 	16 to 150
equipment / additional information:
side tables, safety barrier, air table
 POWER: 5 PS FORMAT (CM): 78 INSERT HEIGHT (CM): 12 INSERTION DEPTH (CM): 78 RESIDUAL CUT (CM): 1.5 HYDRAULIC OPERATING PRESSURE (BAR): 16 TO 150 EQUIPMENT / ADDITIONAL INFORMATION: SIDE TABLES, SAFETY BARRIER, AIR TABLE
Vendedor: MJS-LINE GmbH
Año de construcción: usado
Precio: 534.000 €
Ubicación: Land-: 1.070 - 1.080 nm<br/>: 5,0 khz<br/>: 25 kwh<br/>: 8 mm<br/>: 4 mm<br/>: 6 mm<br/>: 170 mm<br/>: 120 x 120 mm<br/>: 150 x 100 mm<br/>: 8.500 mm<br/>: 3.000 mm<br/>: 185 mm<br/>fiber laser hesse hd-tc made by durma<br/><br/>the laser power source (resonator) of the hd-tc series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/><br/><br/>the machine consists of the following components:<br/><br/>- capsuled cutting room with safety glass<br/>- cnc control siemens sinumerik with grafic display (made in germany!)<br/>   technology and cutting parameter data bank with presettings for common metals<br/>- laser source i.p.g. 2000 (made in germany!)<br/>- autofocus-cutting head precitec with integrated and adjusted sensor technics and<br/>- motorizedfocus position adjustment (made in germany!) <br/>- liquid cooler for cutting head and resonator<br/>- cad/cam software lantek to program and optimize utilization of material (nesting)<br/>- remote maintenance by lan connection<br/>- manual unloading table<br/>- positioning laser<br/><br/><br/>options:<br/><br/>exhaust unit with filters  ? 12.460,-<br/>automatic unloading table<br/> 4 m  ? 46.950,-<br/> 8 m ? 91.020,-<br/>automatic load- and unloading system  ? 71.860,-<br/><br/>(sample photo shows mod. hd-tc 60170)<br/><br/><br/><br/><br/><br/>laser power: 0,2 - 2,0 kw <br/>wavelength: 1.070 - 1.080 nm <br/>polarization: random <br/>max. pulse frequency: 5,0 khz <br/>average power consumption: 25 kwh <br/>application range:  <br/>mild steel: 8 mm <br/>stainless steel: 4 mm <br/>aluminium: 6 mm  <br/>max tube Ø: 170 mm<br/>min. tube Ø: 20 mm (Ø 12 optional)<br/>max. square tube dimension: 120 x 120 mm<br/>max. rectangular tube dimension: 150 x 100 mm<br/>max. tube lenght: 8.500 mm<br/>min. tube lenght (for automatic loading): 3.000 mm<br/>max. tube weight: 37,5 kg/m<br/>automatic infeed: yes<br/>automatic outfeed: yes<br/>amount of chucks: 1<br/>last cut tube lenght: 185 mm<br/>velocity of driver chuck: 90 m/min.<br/>acceleration of driver chuck: 10 m/s2<br/>accuracy: ±0,20 mm<br/>positioning accuracy: ±0,05 mm<br/>tube types: pipe, square, rectangular, eliptic (h, c, u, l)<br/><br/><br/><br/> : 1.070 - 1.080 NM
: 5,0 KHZ
: 25 KWH
: 8 MM
: 4 MM
: 6 MM
: 170 MM
: 120 X 120 MM
: 150 X 100 MM
: 8.500 MM
: 3.000 MM
: 185 MM
FIBER LASER HESSE HD-TC MADE BY DURMA

THE LASER POWER SOURCE (RESONATOR) OF THE HD-TC SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.


THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

- CAPSULED CUTTING ROOM WITH SAFETY GLASS
- CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
   TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
- LASER SOURCE I.P.G. 2000 (MADE IN GERMANY!)
- AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND
- MOTORIZEDFOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
- LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
- CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
- REMOTE MAINTENANCE BY LAN CONNECTION
- MANUAL UNLOADING TABLE
- POSITIONING LASER


OPTIONS:

EXHAUST UNIT WITH FILTERS  ? 12.460,-
AUTOMATIC UNLOADING TABLE
 4 M  ? 46.950,-
 8 M ? 91.020,-
AUTOMATIC LOAD- AND UNLOADING SYSTEM  ? 71.860,-

(SAMPLE PHOTO SHOWS MOD. HD-TC 60170)





LASER POWER: 0,2 - 2,0 KW
WAVELENGTH: 1.070 - 1.080 NM
POLARIZATION: RANDOM
MAX. PULSE FREQUENCY: 5,0 KHZ
AVERAGE POWER CONSUMPTION: 25 KWH
APPLICATION RANGE:
MILD STEEL: 8 MM
STAINLESS STEEL: 4 MM
ALUMINIUM: 6 MM
MAX TUBE Ø: 170 MM
MIN. TUBE Ø: 20 MM (Ø 12 OPTIONAL)
MAX. SQUARE TUBE DIMENSION: 120 X 120 MM
MAX. RECTANGULAR TUBE DIMENSION: 150 X 100 MM
MAX. TUBE LENGHT: 8.500 MM
MIN. TUBE LENGHT (FOR AUTOMATIC LOADING): 3.000 MM
MAX. TUBE WEIGHT: 37,5 KG/M
AUTOMATIC INFEED: YES
AUTOMATIC OUTFEED: YES
AMOUNT OF CHUCKS: 1
LAST CUT TUBE LENGHT: 185 MM
VELOCITY OF DRIVER CHUCK: 90 M/MIN.
ACCELERATION OF DRIVER CHUCK: 10 M/S2
ACCURACY: ±0,20 MM
POSITIONING ACCURACY: ±0,05 MM
TUBE TYPES: PIPE, SQUARE, RECTANGULAR, ELIPTIC (H, C, U, L)



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 3.500 €
Ubicación: Land-mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
about 15 coils of unipolar single braided electric cables with different sections (from 20 mm² to 200 mm²)
also present optical fiber
see photos for details
many lots will be on sale, a complete catalogue of which is published on our website or contact us at 030 7751645 during office hours 9-13, 14:18.
  MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. ABOUT 15 COILS OF UNIPOLAR SINGLE BRAIDED ELECTRIC CABLES WITH DIFFERENT SECTIONS (FROM 20 MM² TO 200 MM²) ALSO PRESENT OPTICAL FIBER SEE PHOTOS FOR DETAILS MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Precio: 427.600 €
Ubicación: Land-: 1.070 - 1.080 nm<br/>: 5,0 khz<br/>: 25 kwh<br/>: 8 mm<br/>: 4 mm<br/>: 6 mm<br/>: 170 mm<br/>: 120 x 120 mm<br/>: 150 x 100 mm<br/>: 6.500 mm<br/>: 3.000 mm<br/>: 185 mm<br/>fiber laser hesse hd-tc made by durma<br/><br/>the laser power source (resonator) of the hd-tc series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/><br/><br/>the machine consists of the following components:<br/><br/>- capsuled cutting room with safety glass<br/>- cnc control siemens sinumerik with grafic display (made in germany!)<br/>   technology and cutting parameter data bank with presettings for common metals<br/>- laser source i.p.g. 2000 (made in germany!)<br/>- autofocus-cutting head precitec with integrated and adjusted sensor technics and<br/>- motorizedfocus position adjustment (made in germany!) <br/>- liquid cooler for cutting head and resonator<br/>- cad/cam software lantek to program and optimize utilization of material (nesting)<br/>- remote maintenance by lan connection<br/>- manual unloading table<br/>- positioning laser<br/><br/><br/>options:<br/><br/>exhaust unit with filters  ? 9.110,-<br/>automatic unloading table<br/> 4 m  ? 33.540,-<br/> 6 m  ? 47.910,-<br/>automatic load- and unloading system  ? 38.330,-<br/><br/><br/><br/><br/><br/>laser power: 0,2 - 2,0 kw <br/>wavelength: 1.070 - 1.080 nm <br/>polarization: random <br/>max. pulse frequency: 5,0 khz <br/>average power consumption: 25 kwh <br/>application range:  <br/>mild steel: 8 mm <br/>stainless steel: 4 mm <br/>aluminium: 6 mm  <br/>max tube Ø: 170 mm<br/>min. tube Ø: 20 mm (Ø 12 optional)<br/>max. square tube dimension: 120 x 120 mm<br/>max. rectangular tube dimension: 150 x 100 mm<br/>max. tube lenght: 6.500 mm<br/>min. tube lenght (for automatic loading): 3.000 mm<br/>max. tube weight: 37,5 kg/m<br/>automatic infeed: yes<br/>automatic outfeed: yes<br/>amount of chucks: 1<br/>last cut tube lenght: 185 mm<br/>velocity of driver chuck: 90 m/min.<br/>acceleration of driver chuck: 10 m/s2<br/>accuracy: ±0,20 mm<br/>positioning accuracy: ±0,05 mm<br/>tube types: pipe, square, rectangular, eliptic (h, c, u, l)<br/><br/><br/><br/> : 1.070 - 1.080 NM
: 5,0 KHZ
: 25 KWH
: 8 MM
: 4 MM
: 6 MM
: 170 MM
: 120 X 120 MM
: 150 X 100 MM
: 6.500 MM
: 3.000 MM
: 185 MM
FIBER LASER HESSE HD-TC MADE BY DURMA

THE LASER POWER SOURCE (RESONATOR) OF THE HD-TC SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.


THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

- CAPSULED CUTTING ROOM WITH SAFETY GLASS
- CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
   TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
- LASER SOURCE I.P.G. 2000 (MADE IN GERMANY!)
- AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND
- MOTORIZEDFOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
- LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
- CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
- REMOTE MAINTENANCE BY LAN CONNECTION
- MANUAL UNLOADING TABLE
- POSITIONING LASER


OPTIONS:

EXHAUST UNIT WITH FILTERS  ? 9.110,-
AUTOMATIC UNLOADING TABLE
 4 M  ? 33.540,-
 6 M  ? 47.910,-
AUTOMATIC LOAD- AND UNLOADING SYSTEM  ? 38.330,-





LASER POWER: 0,2 - 2,0 KW
WAVELENGTH: 1.070 - 1.080 NM
POLARIZATION: RANDOM
MAX. PULSE FREQUENCY: 5,0 KHZ
AVERAGE POWER CONSUMPTION: 25 KWH
APPLICATION RANGE:
MILD STEEL: 8 MM
STAINLESS STEEL: 4 MM
ALUMINIUM: 6 MM
MAX TUBE Ø: 170 MM
MIN. TUBE Ø: 20 MM (Ø 12 OPTIONAL)
MAX. SQUARE TUBE DIMENSION: 120 X 120 MM
MAX. RECTANGULAR TUBE DIMENSION: 150 X 100 MM
MAX. TUBE LENGHT: 6.500 MM
MIN. TUBE LENGHT (FOR AUTOMATIC LOADING): 3.000 MM
MAX. TUBE WEIGHT: 37,5 KG/M
AUTOMATIC INFEED: YES
AUTOMATIC OUTFEED: YES
AMOUNT OF CHUCKS: 1
LAST CUT TUBE LENGHT: 185 MM
VELOCITY OF DRIVER CHUCK: 90 M/MIN.
ACCELERATION OF DRIVER CHUCK: 10 M/S2
ACCURACY: ±0,20 MM
POSITIONING ACCURACY: ±0,05 MM
TUBE TYPES: PIPE, SQUARE, RECTANGULAR, ELIPTIC (H, C, U, L)



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-air table 
enlarged side tables left and right with air
1 spare blade  AIR TABLE ENLARGED SIDE TABLES LEFT AND RIGHT WITH AIR 1 SPARE BLADE
Vendedor: Schaefer Printing Machine e. K.
Año de construcción: usado
Precio: 265.850 €
Ubicación: Land-: 3.100 x 1.550 mm<br/>: 1.070 - 1.080 nm<br/>: 5,0 khz<br/>: 25 kwh<br/>: 12 mm<br/>: 6 mm<br/>: 6 mm<br/>: 3.100 mm<br/>: 1.550 mm<br/>: 125 mm<br/>: 3.000 x 1.500 mm<br/>: 1.000 kg<br/>: 9.000 x 7.500 mm<br/>: 6.300 mm<br/>: 4.860 mm<br/>: 2.300 mm<br/>: 9.000 kg<br/>fiber laser hesse hd-fs made by durma<br/><br/>when the requirement is to laser cut with high performance and precision, though the available space is limited, it is a task for the model hd-fs. the control unit is integrated in the machine to keep the overall dimensions as low as possible. the table can be manually pulled out on the side of the machine to load and unload it.<br/><br/>the laser power source (resonator) of the hdfl series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/><br/><br/>the machine consists of the following components:<br/><br/>capsuled cutting room with safety glass<br/>lateral shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time<br/>cnc control siemens sinumerik with grafic display (made in germany!)<br/>- technology and cutting parameter data bank with presettings for common metals<br/>laser source i.p.g 2000 (made in germany!)<br/>autofocus-cutting head precitec with integrated and adjusted sensor technics and mororized focus position adjustment (made in germany!) <br/>liquid cooler for cutting head and resonator<br/>cad/cam software lantek to program and optimize utilization of material (nesting)<br/>remote maintenance by lan connection<br/>safety light barrier covering<br/>laser service set<br/><br/>options:<br/><br/>exhaust unit with filters   ? 12.460,-<br/><br/>scrap conveyor for small parts and waste   ? 5.750,-<br/><br/><br/>(video shows mod. hd-fl with linear motors, model generation 2014)<br/><br/><br/><br/><br/>cutting area: 3.100 x 1.550 mm <br/>laser power: 0,2 - 2,0 kw <br/>wavelength: 1.070 - 1.080 nm <br/>polarization: random <br/>max. pulse frequency: 5,0 khz <br/>average power consumption: 25 kwh <br/>application range:  <br/>mild steel: 12 mm <br/>stainless steel: 6 mm <br/>aluminium: 6 mm <br/>working ange:  <br/>x-axis: 3.100 mm <br/>y-axis: 1.550 mm <br/>z-axis: 125 mm<br/>max. sheet size: 3.000 x 1.500 mm<br/>max. sheet weight: 1.000 kg<br/>dynamic and precision:  <br/>max speed x-axes: 90 m/min<br/>max speed y-axes: 90 m/min<br/>max. spped simultaneous: 127 m/min <br/>max. acceleration: 10 m/s² <br/>positional accuracy: +/- 0,05 mm <br/>repeatability: +/- 0,05 mm <br/>dimensions:  <br/>lay-out area ca.: 9.000 x 7.500 mm<br/>length: 6.300 mm<br/>width: 4.860 mm<br/>height: 2.300 mm<br/>weight ca.: 9.000 kg<br/><br/><br/><br/> : 3.100 X 1.550 MM
: 1.070 - 1.080 NM
: 5,0 KHZ
: 25 KWH
: 12 MM
: 6 MM
: 6 MM
: 3.100 MM
: 1.550 MM
: 125 MM
: 3.000 X 1.500 MM
: 1.000 KG
: 9.000 X 7.500 MM
: 6.300 MM
: 4.860 MM
: 2.300 MM
: 9.000 KG
FIBER LASER HESSE HD-FS MADE BY DURMA

WHEN THE REQUIREMENT IS TO LASER CUT WITH HIGH PERFORMANCE AND PRECISION, THOUGH THE AVAILABLE SPACE IS LIMITED, IT IS A TASK FOR THE MODEL HD-FS. THE CONTROL UNIT IS INTEGRATED IN THE MACHINE TO KEEP THE OVERALL DIMENSIONS AS LOW AS POSSIBLE. THE TABLE CAN BE MANUALLY PULLED OUT ON THE SIDE OF THE MACHINE TO LOAD AND UNLOAD IT.

THE LASER POWER SOURCE (RESONATOR) OF THE HDFL SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.


THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

CAPSULED CUTTING ROOM WITH SAFETY GLASS
LATERAL SHUTTLE TABLE FOR SIMULTANEOUS LOADING/UNLOADING AND CUTTING TO REDUCE THE SECONDARY PROCESSING TIME
CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
- TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
LASER SOURCE I.P.G 2000 (MADE IN GERMANY!)
AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND MORORIZED FOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
REMOTE MAINTENANCE BY LAN CONNECTION
SAFETY LIGHT BARRIER COVERING
LASER SERVICE SET

OPTIONS:

EXHAUST UNIT WITH FILTERS   ? 12.460,-

SCRAP CONVEYOR FOR SMALL PARTS AND WASTE   ? 5.750,-


(VIDEO SHOWS MOD. HD-FL WITH LINEAR MOTORS, MODEL GENERATION 2014)




CUTTING AREA: 3.100 X 1.550 MM
LASER POWER: 0,2 - 2,0 KW
WAVELENGTH: 1.070 - 1.080 NM
POLARIZATION: RANDOM
MAX. PULSE FREQUENCY: 5,0 KHZ
AVERAGE POWER CONSUMPTION: 25 KWH
APPLICATION RANGE:
MILD STEEL: 12 MM
STAINLESS STEEL: 6 MM
ALUMINIUM: 6 MM
WORKING ANGE:
X-AXIS: 3.100 MM
Y-AXIS: 1.550 MM
Z-AXIS: 125 MM
MAX. SHEET SIZE: 3.000 X 1.500 MM
MAX. SHEET WEIGHT: 1.000 KG
DYNAMIC AND PRECISION:
MAX SPEED X-AXES: 90 M/MIN
MAX SPEED Y-AXES: 90 M/MIN
MAX. SPPED SIMULTANEOUS: 127 M/MIN
MAX. ACCELERATION: 10 M/S²
POSITIONAL ACCURACY: +/- 0,05 MM
REPEATABILITY: +/- 0,05 MM
DIMENSIONS:
LAY-OUT AREA CA.: 9.000 X 7.500 MM
LENGTH: 6.300 MM
WIDTH: 4.860 MM
HEIGHT: 2.300 MM
WEIGHT CA.: 9.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-air table
side table left & right       AIR TABLE SIDE TABLE LEFT & RIGHT
Vendedor: Schaefer Printing Machine e. K.
Año de construcción: usado
Precio: 294.590 €
Ubicación: Land-: 3.100 x 1.550 mm<br/>: 1.070 - 1.080 nm<br/>: 5,0 khz<br/>: 28 kwh<br/>: 16 mm<br/>: 8 mm<br/>: 8 mm<br/>: 3.100 mm<br/>: 1.550 mm<br/>: 125 mm<br/>: 3.000 x 1.500 mm<br/>: 1.000 kg<br/>: 9.000 x 7.500 mm<br/>: 6.300 mm<br/>: 4.860 mm<br/>: 2.300 mm<br/>: 9.000 kg<br/>fiber laser hesse hd-fs made by durma<br/><br/>when the requirement is to laser cut with high performance and precision, though the available space is limited, it is a task for the model hd-fs. the control unit is integrated in the machine to keep the overall dimensions as low as possible. the table can be manually pulled out on the side of the machine to load and unload it.<br/><br/>the laser power source (resonator) of the hdfl series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/> <br/>the machine consists of the following components:<br/><br/>capsuled cutting room with safety glass<br/>lateral shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time<br/>cnc control siemens sinumerik with grafic display (made in germany!)<br/>- technology and cutting parameter data bank with presettings for common metals<br/>laser source i.p.g 3000 (made in germany!)<br/>autofocus-cutting head precitec with integrated and adjusted sensor technics and mororized focus position adjustment (made in germany!) <br/>liquid cooler for cutting head and resonator<br/>cad/cam software lantek to program and optimize utilization of material (nesting)<br/>remote maintenance by lan connection<br/>safety light barrier covering<br/>laser service set<br/><br/>options:<br/><br/>exhaust unit with filters   ? 12.460,-<br/><br/>scrap conveyor for small parts and waste   ? 5.750,-<br/><br/><br/>(video shows mod. hd-fl with linear motors, model generation 2014)<br/><br/><br/><br/><br/><br/>cutting area: 3.100 x 1.550 mm <br/>laser power: 0,3 - 3,0 kw <br/>wavelength: 1.070 - 1.080 nm <br/>polarization: random <br/>max. pulse frequency: 5,0 khz <br/>average power consumption: 28 kwh <br/>application range:  <br/>mild steel: 16 mm <br/>stainless steel: 8 mm <br/>aluminium: 8 mm <br/>working ange:  <br/>x-axis: 3.100 mm <br/>y-axis: 1.550 mm <br/>z-axis: 125 mm<br/>max. sheet size: 3.000 x 1.500 mm<br/>max. sheet weight: 1.000 kg<br/>dynamic and precision:  <br/>max speed x-axes: 90 m/min<br/>max speed y-axes: 90 m/min<br/>max. spped simultaneous: 127 m/min <br/>max. acceleration: 10 m/s² <br/>positional accuracy: +/- 0,05 mm <br/>repeatability: +/- 0,05 mm <br/>dimensions:  <br/>lay-out area ca.: 9.000 x 7.500 mm<br/>length: 6.300 mm<br/>width: 4.860 mm<br/>height: 2.300 mm<br/>weight ca.: 9.000 kg<br/><br/><br/><br/> : 3.100 X 1.550 MM
: 1.070 - 1.080 NM
: 5,0 KHZ
: 28 KWH
: 16 MM
: 8 MM
: 8 MM
: 3.100 MM
: 1.550 MM
: 125 MM
: 3.000 X 1.500 MM
: 1.000 KG
: 9.000 X 7.500 MM
: 6.300 MM
: 4.860 MM
: 2.300 MM
: 9.000 KG
FIBER LASER HESSE HD-FS MADE BY DURMA

WHEN THE REQUIREMENT IS TO LASER CUT WITH HIGH PERFORMANCE AND PRECISION, THOUGH THE AVAILABLE SPACE IS LIMITED, IT IS A TASK FOR THE MODEL HD-FS. THE CONTROL UNIT IS INTEGRATED IN THE MACHINE TO KEEP THE OVERALL DIMENSIONS AS LOW AS POSSIBLE. THE TABLE CAN BE MANUALLY PULLED OUT ON THE SIDE OF THE MACHINE TO LOAD AND UNLOAD IT.

THE LASER POWER SOURCE (RESONATOR) OF THE HDFL SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.

THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

CAPSULED CUTTING ROOM WITH SAFETY GLASS
LATERAL SHUTTLE TABLE FOR SIMULTANEOUS LOADING/UNLOADING AND CUTTING TO REDUCE THE SECONDARY PROCESSING TIME
CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
- TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
LASER SOURCE I.P.G 3000 (MADE IN GERMANY!)
AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND MORORIZED FOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
REMOTE MAINTENANCE BY LAN CONNECTION
SAFETY LIGHT BARRIER COVERING
LASER SERVICE SET

OPTIONS:

EXHAUST UNIT WITH FILTERS   ? 12.460,-

SCRAP CONVEYOR FOR SMALL PARTS AND WASTE   ? 5.750,-


(VIDEO SHOWS MOD. HD-FL WITH LINEAR MOTORS, MODEL GENERATION 2014)





CUTTING AREA: 3.100 X 1.550 MM
LASER POWER: 0,3 - 3,0 KW
WAVELENGTH: 1.070 - 1.080 NM
POLARIZATION: RANDOM
MAX. PULSE FREQUENCY: 5,0 KHZ
AVERAGE POWER CONSUMPTION: 28 KWH
APPLICATION RANGE:
MILD STEEL: 16 MM
STAINLESS STEEL: 8 MM
ALUMINIUM: 8 MM
WORKING ANGE:
X-AXIS: 3.100 MM
Y-AXIS: 1.550 MM
Z-AXIS: 125 MM
MAX. SHEET SIZE: 3.000 X 1.500 MM
MAX. SHEET WEIGHT: 1.000 KG
DYNAMIC AND PRECISION:
MAX SPEED X-AXES: 90 M/MIN
MAX SPEED Y-AXES: 90 M/MIN
MAX. SPPED SIMULTANEOUS: 127 M/MIN
MAX. ACCELERATION: 10 M/S²
POSITIONAL ACCURACY: +/- 0,05 MM
REPEATABILITY: +/- 0,05 MM
DIMENSIONS:
LAY-OUT AREA CA.: 9.000 X 7.500 MM
LENGTH: 6.300 MM
WIDTH: 4.860 MM
HEIGHT: 2.300 MM
WEIGHT CA.: 9.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-m. no.: 7111424
format (cm): 92		
equipment / additional information:
safety barriers, air table, side tables
vibro tablepolar r-2
m.no.: 7183306 // age.: 2001

  M. NO.: 7111424 FORMAT (CM): 92 EQUIPMENT / ADDITIONAL INFORMATION: SAFETY BARRIERS, AIR TABLE, SIDE TABLES VIBRO TABLEPOLAR R-2 M.NO.: 7183306 // AGE.: 2001
Vendedor: MJS-LINE GmbH
Año de construcción: usado
Ubicación: Land-size: 900 x 900 mm<br/> <br/>equipments:<br/>jogger<br/>spareknives<br/>good condition without any damage<br/>checked and cleaned SIZE: 900 X 900 MM

EQUIPMENTS:
JOGGER
SPAREKNIVES
GOOD CONDITION WITHOUT ANY DAMAGE
CHECKED AND CLEANED
Vendedor: Graphische Okkasionen Karakus
Año de construcción: usado
Ubicación: Land-format (cm): 72	
equipment / additional information:
condition: front mask was damaged when unloading the machine, however
best repaired. machine is in good technical condition

  FORMAT (CM): 72 EQUIPMENT / ADDITIONAL INFORMATION: CONDITION: FRONT MASK WAS DAMAGED WHEN UNLOADING THE MACHINE, HOWEVER BEST REPAIRED. MACHINE IS IN GOOD TECHNICAL CONDITION
Vendedor: MJS-LINE GmbH
Año de construcción: usado
Ubicación: Land-size: 760 x 760 mm<br/> <br/>equipments:<br/>spareknives<br/>em-program<br/>side table SIZE: 760 X 760 MM

EQUIPMENTS:
SPAREKNIVES
EM-PROGRAM
SIDE TABLE
Vendedor: Graphische Okkasionen Karakus
Año de construcción: usado
Ubicación: Land-* polar 92 x year: 2006
x version
air table
2 x large side tables with air
spare blades, tool, etc.
very good condition!
available now!
 * POLAR 92 X YEAR: 2006 X VERSION AIR TABLE 2 X LARGE SIDE TABLES WITH AIR SPARE BLADES, TOOL, ETC. VERY GOOD CONDITION! AVAILABLE NOW!
Vendedor: Bavarian graphics
Año de construcción: usado
Ubicación: Land-serial number: 62629 <br/>weight approx.: 3000 kg<br/>working width: 1350 mm<br/>dimensions (l x w x h) approx.: 2500 x 1400 x 2200  mm<br/>unit 1: kombiniertes kontaktwalzen-schleifschuha <br/>unit 2: schleifschuhaggregat <br/>total power approx: 55 kw<br/>description: bÜtfering classic wide belt sanding machine<br> <br> cross band:<br> grinding belt width 150 mm<br> abrasive belt length 4700 mm<br> full range driver:<br> grinding belt width 1370 mm<br> abrasive belt length 1900 mm<br> <br> - constant workpiece infeed height due to adjustment of the<br> machine head<br> - pressure elements in roller design<br> <br> cross sanding unit:<br> <br> - lamella belt<br> - electronically controlled segmented pressure beam in compact design,<br> element width 50 mm<br> - infinitely variable pressure at the workpiece edges<br> - drive motor 15 kw<br> - abrasive belt drive with maintenance-free, wear-free<br> electric brake device<br> - belt blow-off device, workpiece controlled<br> <br> 1.broadband aggregate<br> <br> - 1 combined contact roller sanding shoe unit, with sanding belt grain compensation<br> - steel contact roller (not profiled)<br> - automatically feeding contact roller<br> - unit in height-adjustable design electronically controlled segmented pressure beam in compact design,<br> element width 50 mm<br> polarity-changing grinding belt drive motor 12.5/16 kw<br> (grinding belt speeds 9/18 m/s.)<br> - abrasive belt drive with maintenance-free, wear-free<br> electric brake device<br> 2.broadband aggregate<br> - 1 sanding shoe unit<br> - unit in height-adjustable design<br> - electronically controlled segmented pressure beam in<br> compact design, element width 25 mm<br> - polarity-changing grinding belt drive motor 12.5/16 kw<br> (grinding belt speeds 9/18 m/s.)<br> - abrasive belt drive with maintenance-free, wear-free<br> electric brake device<br> - belt blow-off device, workpiece controlled, including<br> room extraction with 2 nozzles dm 100 mm (must additional SERIAL NUMBER: 62629
WEIGHT APPROX.: 3000 KG
WORKING WIDTH: 1350 MM
DIMENSIONS (L X W X H) APPROX.: 2500 X 1400 X 2200 MM
UNIT 1: KOMBINIERTES KONTAKTWALZEN-SCHLEIFSCHUHA
UNIT 2: SCHLEIFSCHUHAGGREGAT
TOTAL POWER APPROX: 55 KW
DESCRIPTION: BÜTFERING CLASSIC WIDE BELT SANDING MACHINE

CROSS BAND:
GRINDING BELT WIDTH 150 MM
ABRASIVE BELT LENGTH 4700 MM
FULL RANGE DRIVER:
GRINDING BELT WIDTH 1370 MM
ABRASIVE BELT LENGTH 1900 MM

- CONSTANT WORKPIECE INFEED HEIGHT DUE TO ADJUSTMENT OF THE
MACHINE HEAD
- PRESSURE ELEMENTS IN ROLLER DESIGN

CROSS SANDING UNIT:

- LAMELLA BELT
- ELECTRONICALLY CONTROLLED SEGMENTED PRESSURE BEAM IN COMPACT DESIGN,
ELEMENT WIDTH 50 MM
- INFINITELY VARIABLE PRESSURE AT THE WORKPIECE EDGES
- DRIVE MOTOR 15 KW
- ABRASIVE BELT DRIVE WITH MAINTENANCE-FREE, WEAR-FREE
ELECTRIC BRAKE DEVICE
- BELT BLOW-OFF DEVICE, WORKPIECE CONTROLLED

1.BROADBAND AGGREGATE

- 1 COMBINED CONTACT ROLLER SANDING SHOE UNIT, WITH SANDING BELT GRAIN COMPENSATION
- STEEL CONTACT ROLLER (NOT PROFILED)
- AUTOMATICALLY FEEDING CONTACT ROLLER
- UNIT IN HEIGHT-ADJUSTABLE DESIGN ELECTRONICALLY CONTROLLED SEGMENTED PRESSURE BEAM IN COMPACT DESIGN,
ELEMENT WIDTH 50 MM
POLARITY-CHANGING GRINDING BELT DRIVE MOTOR 12.5/16 KW
(GRINDING BELT SPEEDS 9/18 M/S.)
- ABRASIVE BELT DRIVE WITH MAINTENANCE-FREE, WEAR-FREE
ELECTRIC BRAKE DEVICE
2.BROADBAND AGGREGATE
- 1 SANDING SHOE UNIT
- UNIT IN HEIGHT-ADJUSTABLE DESIGN
- ELECTRONICALLY CONTROLLED SEGMENTED PRESSURE BEAM IN
COMPACT DESIGN, ELEMENT WIDTH 25 MM
- POLARITY-CHANGING GRINDING BELT DRIVE MOTOR 12.5/16 KW
(GRINDING BELT SPEEDS 9/18 M/S.)
- ABRASIVE BELT DRIVE WITH MAINTENANCE-FREE, WEAR-FREE
ELECTRIC BRAKE DEVICE
- BELT BLOW-OFF DEVICE, WORKPIECE CONTROLLED, INCLUDING
ROOM EXTRACTION WITH 2 NOZZLES DM 100 MM (MUST ADDITIONAL
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-* polar 78 ed
year of construction: 1999
ed version
air table,
2 x large side tables with air
spare blades, tool, etc. * POLAR 78 ED YEAR OF CONSTRUCTION: 1999 ED VERSION AIR TABLE, 2 X LARGE SIDE TABLES WITH AIR SPARE BLADES, TOOL, ETC.
Vendedor: Bavarian graphics
Año de construcción: usado
Ubicación: Land-cutting width: 115 cm<br/>feeding depth: 115 cm<br/>feeding high max.: 12 cm<br/>optional you can add to complete street with transomat, lift and jogger <br/><br/><br/><br/><br/> CUTTING WIDTH: 115 CM
FEEDING DEPTH: 115 CM
FEEDING HIGH MAX.: 12 CM
OPTIONAL YOU CAN ADD TO COMPLETE STREET WITH TRANSOMAT, LIFT AND JOGGER




Vendedor: Steenholdt GmbH
Año de construcción: usado
Ubicación: Land-printery from one place in germany as package for sale:

manufacturer: heidelberger
model: quickmaster
2 colors.
automatic plate feeder, inserter.
year: 2008
well maintained.
 
manufacturer: heidelberger
model: tiegel
roll set (4pcs) new
year: approx. 1970

cutting machine
manufacturer: polar mohr
model: type e 92
incl. 5 knives
top condition, regular maintenance
year: 1995

folding machine
manufacturer: multipli
model: 35 by mb
year of construction approx. 2008
have new rollers in

fälzelgerät
matador
electrical

drilling machine
manufacturer: citoborma
model: 280 b
2 heads

stapling machine multinak s
2 stitching heads
 
platesetter
manufacturer: sack
for 50x70
with vanity unit and 10 drawers.

various cabinets

package price: on request PRINTERY FROM ONE PLACE IN GERMANY AS PACKAGE FOR SALE: MANUFACTURER: HEIDELBERGER MODEL: QUICKMASTER 2 COLORS. AUTOMATIC PLATE FEEDER, INSERTER. YEAR: 2008 WELL MAINTAINED. MANUFACTURER: HEIDELBERGER MODEL: TIEGEL ROLL SET (4PCS) NEW YEAR: APPROX. 1970 CUTTING MACHINE MANUFACTURER: POLAR MOHR MODEL: TYPE E 92 INCL. 5 KNIVES TOP CONDITION, REGULAR MAINTENANCE YEAR: 1995 FOLDING MACHINE MANUFACTURER: MULTIPLI MODEL: 35 BY MB YEAR OF CONSTRUCTION APPROX. 2008 HAVE NEW ROLLERS IN FäLZELGERäT MATADOR ELECTRICAL DRILLING MACHINE MANUFACTURER: CITOBORMA MODEL: 280 B 2 HEADS STAPLING MACHINE MULTINAK S 2 STITCHING HEADS PLATESETTER MANUFACTURER: SACK FOR 50X70 WITH VANITY UNIT AND 10 DRAWERS. VARIOUS CABINETS PACKAGE PRICE: ON REQUEST
Vendedor: USED Machines
Año de construcción: usado
Ubicación: Land-max. paper size: 90 x 115 cm<br/>include air removal roller<br/><br/><br/><br/><br/> MAX. PAPER SIZE: 90 X 115 CM
INCLUDE AIR REMOVAL ROLLER




Vendedor: Steenholdt GmbH
Año de construcción: usado
Ubicación: Land-program, monitor, light-barrier, air-table, spere-knife, very good working condition ,immed. from germany  PROGRAM, MONITOR, LIGHT-BARRIER, AIR-TABLE, SPERE-KNIFE, VERY GOOD WORKING CONDITION ,IMMED. FROM GERMANY
Vendedor: Drupatec
Año de construcción: usado
Ubicación: Land-air table
side table
program AIR TABLE SIDE TABLE PROGRAM
Vendedor: YUKE
Año de construcción: usado
Ubicación: Land-cutting width: 115 cm<br/>feeding depth: 115 cm<br/>feeding high max.: 12 cm<br/><br/><br/><br/><br/> CUTTING WIDTH: 115 CM
FEEDING DEPTH: 115 CM
FEEDING HIGH MAX.: 12 CM




Vendedor: Steenholdt GmbH
Año de construcción: usado
Ubicación: Land-continuous drilling capacity in st 60 50 mm
drilling capacity 60 mm
thread capacity in st 60 m 50 mm
column diameter 200 mm
table incl. edge 700 x 590 mm

motor polarity switchable 2.5 / 3.5 kw
recording mk 4 radius 360 mm
spindle stroke 225 mm

4 speed series, continuously variable 30-1400 rpm (pol-switchable and transmission)
4 automatic feeds approx.		0.1 - 0.4 mm / rev

w x d x h approx.					0.7 x 1.2 x 2,15 m
weight approx.					0.8 to

equipment / scope of supply:-stepless speed adjustment, with transmission from 30 rpm
-table column can be rotated
-worked base plate with t-slots for editing high parts
-integrated machine light
-mk 4 - recording
-coolant system - engine stage 1 counterclockwise rotation
-feed device, 4 feeds
-thread cutting device CONTINUOUS DRILLING CAPACITY IN ST 60 50 MM DRILLING CAPACITY 60 MM THREAD CAPACITY IN ST 60 M 50 MM COLUMN DIAMETER 200 MM TABLE INCL. EDGE 700 X 590 MM MOTOR POLARITY SWITCHABLE 2.5 / 3.5 KW RECORDING MK 4 RADIUS 360 MM SPINDLE STROKE 225 MM 4 SPEED SERIES, CONTINUOUSLY VARIABLE 30-1400 RPM (POL-SWITCHABLE AND TRANSMISSION) 4 AUTOMATIC FEEDS APPROX. 0.1 - 0.4 MM / REV W X D X H APPROX. 0.7 X 1.2 X 2,15 M WEIGHT APPROX. 0.8 TO EQUIPMENT / SCOPE OF SUPPLY:-STEPLESS SPEED ADJUSTMENT, WITH TRANSMISSION FROM 30 RPM -TABLE COLUMN CAN BE ROTATED -WORKED BASE PLATE WITH T-SLOTS FOR EDITING HIGH PARTS -INTEGRATED MACHINE LIGHT -MK 4 - RECORDING -COOLANT SYSTEM - ENGINE STAGE 1 COUNTERCLOCKWISE ROTATION -FEED DEVICE, 4 FEEDS -THREAD CUTTING DEVICE
Vendedor: Schrenk Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-size: 750 x 1.040 mm<br/> <br/>equipments:<br/>pile lift polar<br/>tested and checked : in working condition<br/>carrying capacity 600 kg<br/>cleaned and checked SIZE: 750 X 1.040 MM

EQUIPMENTS:
PILE LIFT POLAR
TESTED AND CHECKED : IN WORKING CONDITION
CARRYING CAPACITY 600 KG
CLEANED AND CHECKED
Vendedor: Graphische Okkasionen Karakus
Año de construcción: usado
Ubicación: Land-standard STANDARD
Vendedor: Seizmeier GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-absolutely top-condition! including: stacker, pile-lift, 2 spare-knifes ABSOLUTELY TOP-CONDITION! INCLUDING: STACKER, PILE-LIFT, 2 SPARE-KNIFES
Vendedor: PANGRAPHIC GMBH
Año de construcción: usado
Ubicación: Land-we are pleased to offer: 
three phase 415 vac supply 
automatic clamp 
power backgauge 
light guarding system, air table 
99 digital programme measure 
fully guarded to hse requirements 
standard accessories including 2 knives, cutting sticks, 
good condition 
available immediately  WE ARE PLEASED TO OFFER: THREE PHASE 415 VAC SUPPLY AUTOMATIC CLAMP POWER BACKGAUGE LIGHT GUARDING SYSTEM, AIR TABLE 99 DIGITAL PROGRAMME MEASURE FULLY GUARDED TO HSE REQUIREMENTS STANDARD ACCESSORIES INCLUDING 2 KNIVES, CUTTING STICKS, GOOD CONDITION AVAILABLE IMMEDIATELY
Vendedor: Jerry Curtin Limited
Año de construcción: usado
Ubicación: Land-platine-error: repairing- cost = euro 1.100,00 or less ... PLATINE-ERROR: REPAIRING- COST = EURO 1.100,00 OR LESS ...
Vendedor: PANGRAPHIC GMBH
Año de construcción: usado
Ubicación: Land-air table, tray tables l + r AIR TABLE, TRAY TABLES L + R
Vendedor: Seizmeier GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-max. paper size: 70 x 100 cm<br/>max. lifting power: 1000 kg<br/>for fix instalation at cutting machine<br/><br/><br/><br/><br/> MAX. PAPER SIZE: 70 X 100 CM
MAX. LIFTING POWER: 1000 KG
FOR FIX INSTALATION AT CUTTING MACHINE




Vendedor: Steenholdt GmbH
Año de construcción: usado
Ubicación: Land-air table, air conveyor tables l + r,. AIR TABLE, AIR CONVEYOR TABLES L + R,.
Vendedor: Seizmeier GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-dimensions (l/w/h): 95x100x115 cm<br/>air cushion table for cutting machines<br/><br/><br/><br/> DIMENSIONS (L/W/H): 95X100X115 CM
AIR CUSHION TABLE FOR CUTTING MACHINES



Vendedor: Steenholdt GmbH
Año de construcción: usado
Ubicación: Land-air table, air conveyor table left, lift right, slr AIR TABLE, AIR CONVEYOR TABLE LEFT, LIFT RIGHT, SLR
Vendedor: Seizmeier GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-max. paper size: 90 x 90 cm<br/><br/><br/><br/><br/> MAX. PAPER SIZE: 90 X 90 CM




Vendedor: Steenholdt GmbH
Año de construcción: usado
Ubicación: Land-- programm
- chromed air table
- light barrier
- resopal air side table left and right
- baumann lift, typ n, 1981
- spare knife - PROGRAMM - CHROMED AIR TABLE - LIGHT BARRIER - RESOPAL AIR SIDE TABLE LEFT AND RIGHT - BAUMANN LIFT, TYP N, 1981 - SPARE KNIFE
Vendedor: BOZAL Graphische Maschinen GmbH
Año de construcción: usado
Ubicación: Land-cutting width:  cm<br/>feeding depth:  cm<br/>feeding high max.:  cm<br/><br/><br/><br/><br/> CUTTING WIDTH: CM
FEEDING DEPTH: CM
FEEDING HIGH MAX.: CM




Vendedor: Steenholdt GmbH
Año de construcción: usado
Ubicación: Land-- programm
- monitor
- chromed air table
- resopal air side table (right/left)
- spare knife - PROGRAMM - MONITOR - CHROMED AIR TABLE - RESOPAL AIR SIDE TABLE (RIGHT/LEFT) - SPARE KNIFE
Vendedor: BOZAL Graphische Maschinen GmbH
Año de construcción: usado
Ubicación: Land-cutting width: 76 cm<br/>feeding depth: 76 cm<br/>feeding high max.: 12 cm<br/>serial no.: 6261107 <br/><br/><br/><br/><br/> CUTTING WIDTH: 76 CM
FEEDING DEPTH: 76 CM
FEEDING HIGH MAX.: 12 CM
SERIAL NO.: 6261107




Vendedor: Steenholdt GmbH
Año de construcción: usado
Ubicación: Land-- jogging table with air
- with smooth out roller - JOGGING TABLE WITH AIR - WITH SMOOTH OUT ROLLER
Vendedor: BOZAL Graphische Maschinen GmbH
Año de construcción: usado
Ubicación: Land-screw size:115 mm<br/>injection shot weight in polysterol:5858 g<br/>clamping force:20000 kn<br/>: <br/>injection unit: <br/>screw size:115 mm<br/>max. swept volumne:6.232 cm³<br/>injection shot weight in polysterol:5.858 g/ps<br/>injection pressure:2.205 bar<br/>clamping unit: <br/>closing pressure:2.000 t<br/>tie bar distance:1.900  x 1.500 mm<br/>mould hight - min.:1.000 mm<br/>mould hight - max.:1.700 mm<br/>opening stroke:2.600 mm<br/>control: <br/>microprocessor control:polaris <br/>screen text:deutsch / german <br/>manual:deutsch / german <br/>equipment: <br/>robot interface: <br/>core pull:4 <br/>without hopper / without water distributor:ohne <br/>other datas: <br/>pump drive power:233,2 kw<br/>pump drive rating: a<br/>cilinder heating capacity:78 kw<br/>cilinder heating capacity: a<br/>capacity hot runner: a<br/>dimension clamping unit l x w x h: m<br/>dimension injection unit l x w x h: m<br/>:14,3 x 4,3 x 3,6 m<br/>total weight:111.000 kg<br/><br/> payment terms: 50% with order, 50% prior to delivery SCREW SIZE:115 MM
INJECTION SHOT WEIGHT IN POLYSTEROL:5858 G
CLAMPING FORCE:20000 KN
:
INJECTION UNIT:
SCREW SIZE:115 MM
MAX. SWEPT VOLUMNE:6.232 CM³
INJECTION SHOT WEIGHT IN POLYSTEROL:5.858 G/PS
INJECTION PRESSURE:2.205 BAR
CLAMPING UNIT:
CLOSING PRESSURE:2.000 T
TIE BAR DISTANCE:1.900 X 1.500 MM
MOULD HIGHT - MIN.:1.000 MM
MOULD HIGHT - MAX.:1.700 MM
OPENING STROKE:2.600 MM
CONTROL:
MICROPROCESSOR CONTROL:POLARIS
SCREEN TEXT:DEUTSCH / GERMAN
MANUAL:DEUTSCH / GERMAN
EQUIPMENT:
ROBOT INTERFACE:
CORE PULL:4
WITHOUT HOPPER / WITHOUT WATER DISTRIBUTOR:OHNE
OTHER DATAS:
PUMP DRIVE POWER:233,2 KW
PUMP DRIVE RATING: A
CILINDER HEATING CAPACITY:78 KW
CILINDER HEATING CAPACITY: A
CAPACITY HOT RUNNER: A
DIMENSION CLAMPING UNIT L X W X H: M
DIMENSION INJECTION UNIT L X W X H: M
:14,3 X 4,3 X 3,6 M
TOTAL WEIGHT:111.000 KG

PAYMENT TERMS: 50% WITH ORDER, 50% PRIOR TO DELIVERY
Vendedor: Complast Gmbh
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)