3835 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Precio: 61.700 €
Ubicación: Land-hercules tube (installed sept 2016)  104,000,00 mas
hdas. goc6 console, software rev 12hw14.6 
cardiq snapshot (cine), smartscore pro, ekg viewer, vct hipower 85kw, direct mpr, exam split, large image series, automa, smart prep, smartstep, vct 64, neurofilter, connect pro, dynamic z axis, autofilter, data export
halo gantry
includes ivy 3150 cardiac trigger monitor  HERCULES TUBE (INSTALLED SEPT 2016) 104,000,00 MAS HDAS. GOC6 CONSOLE, SOFTWARE REV 12HW14.6 CARDIQ SNAPSHOT (CINE), SMARTSCORE PRO, EKG VIEWER, VCT HIPOWER 85KW, DIRECT MPR, EXAM SPLIT, LARGE IMAGE SERIES, AUTOMA, SMART PREP, SMARTSTEP, VCT 64, NEUROFILTER, CONNECT PRO, DYNAMIC Z AXIS, AUTOFILTER, DATA EXPORT HALO GANTRY INCLUDES IVY 3150 CARDIAC TRIGGER MONITOR
Vendedor: Block Imaging International
Año de construcción: usado
Precio: 69.500 €
Ubicación: Land-manufacturer bollegraaf<br/>type hbc 100<br/>year of construction 1990<br/>hours of operation 24,319 hours<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 3,15 m³<br/>theoretic cycle time 22 sec.<br/>bale size 750 x 1,100 mm, length variable<br/>driving motor 2 x 30 kw<br/>tying system 5 fold vertical, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm up to 12 tons/h<br/>bulk weight of 50 kg/cbm up to 25 tons/h<br/>bulk weight of 100 kg/cbm up to 47 tons/h<br/>bale weight 550 up to 850 kg, depends on material<br/>volume hydraulic oil tank 1,200 l<br/>transport dimensions only baler 11,750 x 2,250 x 3,150 mm (l x w x h)<br/>machine weight baler approx. 30 tons<br/><br/>comments:<br/>the machine has been overhauled, is in good condition and immediately available. MANUFACTURER BOLLEGRAAF
TYPE HBC 100
YEAR OF CONSTRUCTION 1990
HOURS OF OPERATION 24,319 HOURS
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 3,15 M³
THEORETIC CYCLE TIME 22 SEC.
BALE SIZE 750 X 1,100 MM, LENGTH VARIABLE
DRIVING MOTOR 2 X 30 KW
TYING SYSTEM 5 FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM UP TO 12 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 25 TONS/H
BULK WEIGHT OF 100 KG/CBM UP TO 47 TONS/H
BALE WEIGHT 550 UP TO 850 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 1,200 L
TRANSPORT DIMENSIONS ONLY BALER 11,750 X 2,250 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 30 TONS

COMMENTS:
THE MACHINE HAS BEEN OVERHAULED, IS IN GOOD CONDITION AND IMMEDIATELY AVAILABLE.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-pallet production line (epal)
sma-ref-6134
category: pallets production lines
manufacturer: bohm & kruse
type: h. 17.1200
year of construction: 1990
components of the system: a) einlegestation for boards + blocks
b) nail machine
c) stamp station
(d) saw
e) stacker
work area: pallet size: epal
special features: 3 man in 8-h shift:
1,500 1,600 pallets
condition: ready to use
under current
location: austria
availability: immediately PALLET PRODUCTION LINE (EPAL) SMA-REF-6134 CATEGORY: PALLETS PRODUCTION LINES MANUFACTURER: BOHM & KRUSE TYPE: H. 17.1200 YEAR OF CONSTRUCTION: 1990 COMPONENTS OF THE SYSTEM: A) EINLEGESTATION FOR BOARDS + BLOCKS B) NAIL MACHINE C) STAMP STATION (D) SAW E) STACKER WORK AREA: PALLET SIZE: EPAL SPECIAL FEATURES: 3 MAN IN 8-H SHIFT: 1,500 1,600 PALLETS CONDITION: READY TO USE UNDER CURRENT LOCATION: AUSTRIA AVAILABILITY: IMMEDIATELY
Vendedor: S-MA GmbH
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer hsm<br/>typ vk 4812 p<br/>year of construction 2016<br/>hours of operation 1,937 hours<br/>press power main press 48 tons<br/>specific press capacity 58,2 n/cm²<br/>feed channel 1,250 x 1,020 mm<br/>theoretic cycle time 24,5 sec.<br/>theoretic  throughput rate 151 m³/hour<br/>bale size 1,100 x 750 x 600 up to 1,200mm<br/>driving motor 15 kw<br/>connected load 17 kw<br/>rated current 36 a<br/>tying system 4-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 3 tons/hour<br/>bulk weight of 50 kg/cbm up to 7,5 tons/hour<br/>bale weight up to 550 kg, depends on material<br/>sps controller (manuf., type) siemens<br/>operating panel (manuf., type) siemens hmi touch panel<br/>filling quantity hydraulic oil tank 300 l<br/>oil type hvi 46<br/>transport dimensions 8,500 x 2,500 x 2,700 mm (l x w x h)<br/>machine weight baler approx. 10 tons<br/><br/>equipment/accessories:<br/>funnel, two mobile wire coil stands for 40 kg wire rolls, bale slider.  to pre-compact and hold down voluminous materials such as loose cartons or foil, the machine is equipped with a small pre-compression flap, holding-down device.<br/><br/>condition of the baler:<br/>with only 1,937 operating hours, the press is in very good condition, immediately available and ready for operation.<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER HSM
TYP VK 4812 P
YEAR OF CONSTRUCTION 2016
HOURS OF OPERATION 1,937 HOURS
PRESS POWER MAIN PRESS 48 TONS
SPECIFIC PRESS CAPACITY 58,2 N/CM²
FEED CHANNEL 1,250 X 1,020 MM
THEORETIC CYCLE TIME 24,5 SEC.
THEORETIC THROUGHPUT RATE 151 M³/HOUR
BALE SIZE 1,100 X 750 X 600 UP TO 1,200MM
DRIVING MOTOR 15 KW
CONNECTED LOAD 17 KW
RATED CURRENT 36 A
TYING SYSTEM 4-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 3 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM UP TO 7,5 TONS/HOUR
BALE WEIGHT UP TO 550 KG, DEPENDS ON MATERIAL
SPS CONTROLLER (MANUF., TYPE) SIEMENS
OPERATING PANEL (MANUF., TYPE) SIEMENS HMI TOUCH PANEL
FILLING QUANTITY HYDRAULIC OIL TANK 300 L
OIL TYPE HVI 46
TRANSPORT DIMENSIONS 8,500 X 2,500 X 2,700 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 10 TONS

EQUIPMENT/ACCESSORIES:
FUNNEL, TWO MOBILE WIRE COIL STANDS FOR 40 KG WIRE ROLLS, BALE SLIDER. TO PRE-COMPACT AND HOLD DOWN VOLUMINOUS MATERIALS SUCH AS LOOSE CARTONS OR FOIL, THE MACHINE IS EQUIPPED WITH A SMALL PRE-COMPRESSION FLAP, HOLDING-DOWN DEVICE.

CONDITION OF THE BALER:
WITH ONLY 1,937 OPERATING HOURS, THE PRESS IS IN VERY GOOD CONDITION, IMMEDIATELY AVAILABLE AND READY FOR OPERATION.

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 159.000 €
Ubicación: Land-empty weight: 16.095 kg capacity on supports: 4.999 kg tires: 18-22.5
lifting height: 20,60 m ground clearance: 0.37 m
total width: 2.43 m overall height: 3.11 m total length: 6,78 m
 EMPTY WEIGHT: 16.095 KG CAPACITY ON SUPPORTS: 4.999 KG TIRES: 18-22.5 LIFTING HEIGHT: 20,60 M GROUND CLEARANCE: 0.37 M TOTAL WIDTH: 2.43 M OVERALL HEIGHT: 3.11 M TOTAL LENGTH: 6,78 M
Vendedor: 3W Handelsgesellschaft m.b.H
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer bollegraaf<br/>typ hbc 80 ak<br/>year of construction 1997<br/>stand  02/2019 operating hours counter 42,555 hours, the counter was probably replaced, the machine has run more hours, exact status not known.<br/>press power main press 78 tons<br/>press power of pre-press 45 tons<br/>feed channel 1,500 x 1,100 mm<br/>filling volume 2.9 m³<br/>theoretic cycle time 22 sec.<br/>throughput rate under operating conditions 300 up to 450 m³/hour<br/>bale size 1,100 x 720 mm, length variable<br/>driving motor 45 kw<br/>tying system 5-fold vertical, 3-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx. 10 tons/hour<br/>bulk weight of 50 kg/cbm  approx. 18 tons/hour<br/>bulk weight of 100 kg/cbm  approx. 30 tons/hour<br/>throughput rate with ruffler  approx. 20 tons/hour<br/>bale weight 550 up to 850 kg, depends on material<br/>volume hydraulic oil tank 900 l<br/>sps controller (manuf., type) siemens s5-100 u<br/>operating panel (manuf., type)  siemens simatic op7 <br/>transport dimensions only baler 10,690 x 2,320 x 3,150 mm (l x w x h)<br/>machine weight baler approx. 26 tons<br/><br/>condition of the baler:<br/>the press comes from a production plant, was regularly maintained and repaired. in 2017 were invested 32.000,- ? and in 2018 more than 48.000,- ?  in the maintenance and repair of the machine.<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER BOLLEGRAAF
TYP HBC 80 AK
YEAR OF CONSTRUCTION 1997
STAND 02/2019 OPERATING HOURS COUNTER 42,555 HOURS, THE COUNTER WAS PROBABLY REPLACED, THE MACHINE HAS RUN MORE HOURS, EXACT STATUS NOT KNOWN.
PRESS POWER MAIN PRESS 78 TONS
PRESS POWER OF PRE-PRESS 45 TONS
FEED CHANNEL 1,500 X 1,100 MM
FILLING VOLUME 2.9 M³
THEORETIC CYCLE TIME 22 SEC.
THROUGHPUT RATE UNDER OPERATING CONDITIONS 300 UP TO 450 M³/HOUR
BALE SIZE 1,100 X 720 MM, LENGTH VARIABLE
DRIVING MOTOR 45 KW
TYING SYSTEM 5-FOLD VERTICAL, 3-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 10 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM APPROX. 18 TONS/HOUR
BULK WEIGHT OF 100 KG/CBM APPROX. 30 TONS/HOUR
THROUGHPUT RATE WITH RUFFLER APPROX. 20 TONS/HOUR
BALE WEIGHT 550 UP TO 850 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 900 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS S5-100 U
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC OP7
TRANSPORT DIMENSIONS ONLY BALER 10,690 X 2,320 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 26 TONS

CONDITION OF THE BALER:
THE PRESS COMES FROM A PRODUCTION PLANT, WAS REGULARLY MAINTAINED AND REPAIRED. IN 2017 WERE INVESTED 32.000,- ? AND IN 2018 MORE THAN 48.000,- ? IN THE MAINTENANCE AND REPAIR OF THE MACHINE.

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-angle welding machine with shrink tunnel
sma-ref-6377
category: miscellaneous packaging technology
manufacturer: kallfass
type: kc 8060 / 650
year of construction: 1991
workspace:
tunnel band-width: 650 mm
tunnel clearance height: 100-400 mm
tunnel hood length: 1,100 mm
transport speed: 2.5-12 m / min
for pe, pp, pof and pvc
condition:
ready for use
under current
location: baden-wã¼rttemberg
availability: immediately ANGLE WELDING MACHINE WITH SHRINK TUNNEL SMA-REF-6377 CATEGORY: MISCELLANEOUS PACKAGING TECHNOLOGY MANUFACTURER: KALLFASS TYPE: KC 8060 / 650 YEAR OF CONSTRUCTION: 1991 WORKSPACE: TUNNEL BAND-WIDTH: 650 MM TUNNEL CLEARANCE HEIGHT: 100-400 MM TUNNEL HOOD LENGTH: 1,100 MM TRANSPORT SPEED: 2.5-12 M / MIN FOR PE, PP, POF AND PVC CONDITION: READY FOR USE UNDER CURRENT LOCATION: BADEN-W&ATILDE;&FRAC14;RTTEMBERG AVAILABILITY: IMMEDIATELY
Vendedor: S-MA GmbH
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer paal<br/>typ konti mk 325 d-so<br/>year of construction 2001<br/>hours of operation 28,898 hours, stand january 2019<br/>press power main press 94 tons<br/>feed channel 2,000 x 1,020 mm<br/>filling volume 2,15 m³<br/>theoretic  throughput rate 825 m³/h<br/>throughput rate under operating conditions 400 m³/h<br/>bale size 1,100 x 750 mm, length variable<br/>driving motor 2 x 45 kw<br/>ruffler 15 kw<br/>connected load 128 kw<br/>rated current 240 a<br/>tying system 4 fold vertical, full automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx. 14 tons/h<br/>bulk weight of 50 kg/cbm approx. 27 tons/h<br/>bulk weight of 100 kg/cbm approx. 38 tons/h<br/>bale weight 525 up to 800 kg, depends on bale length and material<br/>volume hydraulic oil 3,100 l<br/>installation dimensions press with hopper and conveyor 13,312 x 22,800 x 5,700 mm (l x w x h)<br/>transport dimensions only baler 12,352 x 2,340 x 2,800 mm (l x w x h)<br/>machine weight baler approx. 28 tons<br/><br/>technical data conveyor belt<br/>manufacturer  paal<br/>typ kes-1750<br/>year of construction 2001<br/>driving motor 7,5 kw<br/>belt speed 0,3 m/sec.<br/>centre distance 19,500 mm<br/>length feeding conveyor 6,010 mm<br/>length elevating conveyor 11,050 mm<br/>gradient 28°<br/>effecting width 1,750 mm<br/>height drive axle over ground 4,410 mm<br/>height of side wall feeding conv. 527 mm<br/>height of side wall elevating conv. 1,027 mm<br/>pit dimensions 10,100 x 3,100 x 1,250 mm (l x w x d)<br/>weight approx. 12 tons<br/><br/>comments:<br/>the press is in good working condition and immediately available.the seal on the main hydraulic cylinder would have to be replaced. <br/>the scope of delivery includes a conveyor belt (chain belt conveyor, manufacturer paal, type kes-1750), 8 wire stations (without wire) and a bale slider. <br/>the documentation (manual, ce, electrical/hydraulic diagram) is available. an inspection is possible after arrangement. dismantling and loading is the responsibility of the buyer. we assume no liability for the technical data or any errors. TECHNICAL DATA BALER
MANUFACTURER PAAL
TYP KONTI MK 325 D-SO
YEAR OF CONSTRUCTION 2001
HOURS OF OPERATION 28,898 HOURS, STAND JANUARY 2019
PRESS POWER MAIN PRESS 94 TONS
FEED CHANNEL 2,000 X 1,020 MM
FILLING VOLUME 2,15 M³
THEORETIC THROUGHPUT RATE 825 M³/H
THROUGHPUT RATE UNDER OPERATING CONDITIONS 400 M³/H
BALE SIZE 1,100 X 750 MM, LENGTH VARIABLE
DRIVING MOTOR 2 X 45 KW
RUFFLER 15 KW
CONNECTED LOAD 128 KW
RATED CURRENT 240 A
TYING SYSTEM 4 FOLD VERTICAL, FULL AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 14 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 27 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 38 TONS/H
BALE WEIGHT 525 UP TO 800 KG, DEPENDS ON BALE LENGTH AND MATERIAL
VOLUME HYDRAULIC OIL 3,100 L
INSTALLATION DIMENSIONS PRESS WITH HOPPER AND CONVEYOR 13,312 X 22,800 X 5,700 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 12,352 X 2,340 X 2,800 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 28 TONS

TECHNICAL DATA CONVEYOR BELT
MANUFACTURER PAAL
TYP KES-1750
YEAR OF CONSTRUCTION 2001
DRIVING MOTOR 7,5 KW
BELT SPEED 0,3 M/SEC.
CENTRE DISTANCE 19,500 MM
LENGTH FEEDING CONVEYOR 6,010 MM
LENGTH ELEVATING CONVEYOR 11,050 MM
GRADIENT 28°
EFFECTING WIDTH 1,750 MM
HEIGHT DRIVE AXLE OVER GROUND 4,410 MM
HEIGHT OF SIDE WALL FEEDING CONV. 527 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 1,027 MM
PIT DIMENSIONS 10,100 X 3,100 X 1,250 MM (L X W X D)
WEIGHT APPROX. 12 TONS

COMMENTS:
THE PRESS IS IN GOOD WORKING CONDITION AND IMMEDIATELY AVAILABLE.THE SEAL ON THE MAIN HYDRAULIC CYLINDER WOULD HAVE TO BE REPLACED.
THE SCOPE OF DELIVERY INCLUDES A CONVEYOR BELT (CHAIN BELT CONVEYOR, MANUFACTURER PAAL, TYPE KES-1750), 8 WIRE STATIONS (WITHOUT WIRE) AND A BALE SLIDER.
THE DOCUMENTATION (MANUAL, CE, ELECTRICAL/HYDRAULIC DIAGRAM) IS AVAILABLE. AN INSPECTION IS POSSIBLE AFTER ARRANGEMENT. DISMANTLING AND LOADING IS THE RESPONSIBILITY OF THE BUYER. WE ASSUME NO LIABILITY FOR THE TECHNICAL DATA OR ANY ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-technical data:

work area: 2,500 x 1,250 x 115 mm
control: siemens sinumerik 840 d
laser power: 3,200 watts
maximum sheet thickness mild steel: 20 mm
maximum sheet thickness stainless steel: 12 mm
maximum sheet thickness aluminium: 8 mm standard equipment:

-closed machine frame with integrated laser unit
-automatic pallet changer
-tft color display
-position laser diode
-spraying device
-motion unit for high-precision machining
-additional highly dynamic axis yp
-drives with maintenance-free ac servo motors
-closed beam delivery
-conveyor for small parts and waste
-nitroline
-flyline
-infeed end detection

trumpf laser:

-co2 laser truflow 4000
-high-frequency excitation
-maintenance-friendly turbo centrifugal blower
-gas mixer (integrated)
-laser power control
-logbook function laser

cutting head:

-laserschneidopf with 5 "lens
-laserschneidopf with 7.5 "lens
-universal quick exchange device
-controlline

control:

-control siemens sinumerik 840 d
-automatic switch-off
-contourline
-sprintline
-teleservice
-microweld
-rj45 network connector
-3.5 "floppy disk drive
-network connection via tele-diagnosis

security:

-ce marking
-light barrier
-multi-chamber exhaust system
-compact collector
-shop floor programming

(errors and omissions in the technical data, information and prices and subject to prior sale!) 
 TECHNICAL DATA: WORK AREA: 2,500 X 1,250 X 115 MM CONTROL: SIEMENS SINUMERIK 840 D LASER POWER: 3,200 WATTS MAXIMUM SHEET THICKNESS MILD STEEL: 20 MM MAXIMUM SHEET THICKNESS STAINLESS STEEL: 12 MM MAXIMUM SHEET THICKNESS ALUMINIUM: 8 MM STANDARD EQUIPMENT: -CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT -AUTOMATIC PALLET CHANGER -TFT COLOR DISPLAY -POSITION LASER DIODE -SPRAYING DEVICE -MOTION UNIT FOR HIGH-PRECISION MACHINING -ADDITIONAL HIGHLY DYNAMIC AXIS YP -DRIVES WITH MAINTENANCE-FREE AC SERVO MOTORS -CLOSED BEAM DELIVERY -CONVEYOR FOR SMALL PARTS AND WASTE -NITROLINE -FLYLINE -INFEED END DETECTION TRUMPF LASER: -CO2 LASER TRUFLOW 4000 -HIGH-FREQUENCY EXCITATION -MAINTENANCE-FRIENDLY TURBO CENTRIFUGAL BLOWER -GAS MIXER (INTEGRATED) -LASER POWER CONTROL -LOGBOOK FUNCTION LASER CUTTING HEAD: -LASERSCHNEIDOPF WITH 5 "LENS -LASERSCHNEIDOPF WITH 7.5 "LENS -UNIVERSAL QUICK EXCHANGE DEVICE -CONTROLLINE CONTROL: -CONTROL SIEMENS SINUMERIK 840 D -AUTOMATIC SWITCH-OFF -CONTOURLINE -SPRINTLINE -TELESERVICE -MICROWELD -RJ45 NETWORK CONNECTOR -3.5 "FLOPPY DISK DRIVE -NETWORK CONNECTION VIA TELE-DIAGNOSIS SECURITY: -CE MARKING -LIGHT BARRIER -MULTI-CHAMBER EXHAUST SYSTEM -COMPACT COLLECTOR -SHOP FLOOR PROGRAMMING (ERRORS AND OMISSIONS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: imc solutions GmbH
Año de construcción: usado
Ubicación: Land-manufacturer paal<br/>typ konti 425 e<br/>year of construction 2007<br/>hours of operation 33,959 hours<br/>press power 100 tons (120 tons at 300 bar)<br/>specific press capacity 121,1 tons/m²<br/>feed channel 2,000 x 1,020 mm (l x w)<br/>throughput rate under operating conditions 375 m³/hour<br/>theoretic  throughput rate 780 m³/hour<br/>bale size 1,100 x 750 mm (w x h)<br/>driving motor 2 x 45 kw<br/>connected load 108 kw<br/>rated current 210 a<br/>tying system 5-fold vertical, fully automated<br/>throughput rate at a<br/>bulk weight of 35 kg/cbm approx. 13 tons/hour<br/>bulk weight of 60 kg/cbm  approx. 22 tons/hour<br/>bulk weight of 100 kg/cbm  approx. 35 tons/hour<br/>bale weight 550 up to 750 kg, depends on material<br/>volume hydraulic oil tank 3,100 l<br/>sps controller (manuf., type) siemens s7 300<br/>operating panel (manuf., type) siemens multi panel<br/>transport dimensions only baler 14,827 x 2,352 x 3,210 mm<br/>machine weight baler approx. 38 tons<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER PAAL
TYP KONTI 425 E
YEAR OF CONSTRUCTION 2007
HOURS OF OPERATION 33,959 HOURS
PRESS POWER 100 TONS (120 TONS AT 300 BAR)
SPECIFIC PRESS CAPACITY 121,1 TONS/M²
FEED CHANNEL 2,000 X 1,020 MM (L X W)
THROUGHPUT RATE UNDER OPERATING CONDITIONS 375 M³/HOUR
THEORETIC THROUGHPUT RATE 780 M³/HOUR
BALE SIZE 1,100 X 750 MM (W X H)
DRIVING MOTOR 2 X 45 KW
CONNECTED LOAD 108 KW
RATED CURRENT 210 A
TYING SYSTEM 5-FOLD VERTICAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 35 KG/CBM APPROX. 13 TONS/HOUR
BULK WEIGHT OF 60 KG/CBM APPROX. 22 TONS/HOUR
BULK WEIGHT OF 100 KG/CBM APPROX. 35 TONS/HOUR
BALE WEIGHT 550 UP TO 750 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 3,100 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS MULTI PANEL
TRANSPORT DIMENSIONS ONLY BALER 14,827 X 2,352 X 3,210 MM
MACHINE WEIGHT BALER APPROX. 38 TONS

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 5.400 €
Ubicación: Land-code: 0576
brand: stromab
model: ps 45-f/p - ce standard 

pendulum saw   with oilpneumatic feed   equipped with rollers  -  ce standard 

oilpneumatic feed   with two-hand control  with  1 pneumatic hold-down cylinder 
blade diameter  mm 450
depth of cut  mm 130
cross-cut capacity  mm 510
infeed roller table  mm 3000
outfeed roller table  mm 2000
motor hp 5,5
working pressure  6 bar
overall dimensions mounted machine  : mm 5800 x 1600 x 1850 h
overall dimensions for transport : machine  mm 1000 x 1500 x 1850 h - bench  mm 2500 x 1100 x 1200 h 
weight kg 350



 CODE: 0576 BRAND: STROMAB MODEL: PS 45-F/P - CE STANDARD PENDULUM SAW WITH OILPNEUMATIC FEED EQUIPPED WITH ROLLERS - CE STANDARD OILPNEUMATIC FEED WITH TWO-HAND CONTROL WITH 1 PNEUMATIC HOLD-DOWN CYLINDER BLADE DIAMETER MM 450 DEPTH OF CUT MM 130 CROSS-CUT CAPACITY MM 510 INFEED ROLLER TABLE MM 3000 OUTFEED ROLLER TABLE MM 2000 MOTOR HP 5,5 WORKING PRESSURE 6 BAR OVERALL DIMENSIONS MOUNTED MACHINE : MM 5800 X 1600 X 1850 H OVERALL DIMENSIONS FOR TRANSPORT : MACHINE MM 1000 X 1500 X 1850 H - BENCH MM 2500 X 1100 X 1200 H WEIGHT KG 350
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>type hbc 140<br/>year of construction 2003<br/>working hours 39,542 h<br/>press power main press 140 tons<br/>press power of pre-press 70 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 4,34 cbm<br/>theoretic cycle time 16 sec.<br/>bale size 1,100 x 1,100 mm (w x h) length adjustable<br/>driving motor 2 x 75 kw<br/>connected load 209 kw<br/>tying system 5-fold vertical, fully automated<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 30 tons/h<br/>bulk weight of 50 kg/cbm approx. 46 tons/h<br/>bulk weight of 100 kg/cbm approx. 82 tons/h<br/>bale weight 850 up to 1.500 kg<br/>hydraulicoil 2,300 l<br/>baler dimensions built up with hopper approx. 13,200 x 2,750 x 5,020 mm (l x w x h)<br/>transport dimensions only baler approx. 13,200 x 2,750 x 3,400 mm (l x w x h)<br/>machine weight baler 47 tons<br/> <br/>comments: inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYPE HBC 140
YEAR OF CONSTRUCTION 2003
WORKING HOURS 39,542 H
PRESS POWER MAIN PRESS 140 TONS
PRESS POWER OF PRE-PRESS 70 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 4,34 CBM
THEORETIC CYCLE TIME 16 SEC.
BALE SIZE 1,100 X 1,100 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 2 X 75 KW
CONNECTED LOAD 209 KW
TYING SYSTEM 5-FOLD VERTICAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 30 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 46 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 82 TONS/H
BALE WEIGHT 850 UP TO 1.500 KG
HYDRAULICOIL 2,300 L
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX. 13,200 X 2,750 X 5,020 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX. 13,200 X 2,750 X 3,400 MM (L X W X H)
MACHINE WEIGHT BALER 47 TONS

COMMENTS: INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-general data name: drying plant for wood chips, chip dryer, low temperature dryer, wood chip dryer manufacturer: mothermik, de year: 2004 type: hack pulp dryer, low temperature dryer drying product:  wood chips from timber, g30, g40 state: technical data of the dryer are used, connected and ready for use the following data according to the operator's report listed: moisture content of raw product: 60-70%
residual moisture of finished product: 10-15%
heat transfer medium: water
flow temperature 90 â° c temperature: 60 â° c heat demand: 750 kw
heat exchanger: 4 pieces
fans: 6 pieces
hydraulick station 1 piece
	
performance crude at about 60% water content: ca. 19 t / 24 hours
performance of finished product with 10-15% moisture content: approx. 70-90 srm or 11 tonnes / 24 hours
	
drying temperature: 90 â° c.
installed electrical power: 14.5 kw
dryer width: 2.7 m
overall length: ca. 19 m
total width: 7,3 m
exhaust tube height: 8 m
	
all information without guarantee price on request	
 GENERAL DATA NAME: DRYING PLANT FOR WOOD CHIPS, CHIP DRYER, LOW TEMPERATURE DRYER, WOOD CHIP DRYER MANUFACTURER: MOTHERMIK, DE YEAR: 2004 TYPE: HACK PULP DRYER, LOW TEMPERATURE DRYER DRYING PRODUCT: WOOD CHIPS FROM TIMBER, G30, G40 STATE: TECHNICAL DATA OF THE DRYER ARE USED, CONNECTED AND READY FOR USE THE FOLLOWING DATA ACCORDING TO THE OPERATOR'S REPORT LISTED: MOISTURE CONTENT OF RAW PRODUCT: 60-70% RESIDUAL MOISTURE OF FINISHED PRODUCT: 10-15% HEAT TRANSFER MEDIUM: WATER FLOW TEMPERATURE 90 &ACIRC;&DEG; C TEMPERATURE: 60 &ACIRC;&DEG; C HEAT DEMAND: 750 KW HEAT EXCHANGER: 4 PIECES FANS: 6 PIECES HYDRAULICK STATION 1 PIECE PERFORMANCE CRUDE AT ABOUT 60% WATER CONTENT: CA. 19 T / 24 HOURS PERFORMANCE OF FINISHED PRODUCT WITH 10-15% MOISTURE CONTENT: APPROX. 70-90 SRM OR 11 TONNES / 24 HOURS DRYING TEMPERATURE: 90 &ACIRC;&DEG; C. INSTALLED ELECTRICAL POWER: 14.5 KW DRYER WIDTH: 2.7 M OVERALL LENGTH: CA. 19 M TOTAL WIDTH: 7,3 M EXHAUST TUBE HEIGHT: 8 M ALL INFORMATION WITHOUT GUARANTEE PRICE ON REQUEST
Vendedor: SN-InTec Ltd.& CO.KG
Año de construcción: usado
Precio: 7.500 €
Ubicación: Land-technical data chain belt conveyor<br/>manufacturer bollegraaf<br/>typ hbt 600/800<br/>driving motor 1,1 kw<br/>length feeding conveyor 3,550 mm<br/>length elevating conveyor 7,780 mm<br/>grade 30°<br/>effecting width 790 mm<br/>height drive axle over ground approx. 4,000 mm<br/>height of side wall feeding conv. 160 mm<br/>height of side wall elevating conv. 550 mm<br/>transport dimensions over all 9,500 x 1,800 x 2,400 mm<br/><br/>remarks:<br/>a inspection is possible by appointment. we will not assume liability for the given technical data and possible errors. TECHNICAL DATA CHAIN BELT CONVEYOR
MANUFACTURER BOLLEGRAAF
TYP HBT 600/800
DRIVING MOTOR 1,1 KW
LENGTH FEEDING CONVEYOR 3,550 MM
LENGTH ELEVATING CONVEYOR 7,780 MM
GRADE 30°
EFFECTING WIDTH 790 MM
HEIGHT DRIVE AXLE OVER GROUND APPROX. 4,000 MM
HEIGHT OF SIDE WALL FEEDING CONV. 160 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 550 MM
TRANSPORT DIMENSIONS OVER ALL 9,500 X 1,800 X 2,400 MM

REMARKS:
A INSPECTION IS POSSIBLE BY APPOINTMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 600 €
Ubicación: Land-items suitable for wide-belt sander (500454), 41 piece, 1,120 x 2,150 mm, grain belts klingspor: 40, 60, 80, 100, 120, 150, 180, unused. ITEMS SUITABLE FOR WIDE-BELT SANDER (500454), 41 PIECE, 1,120 X 2,150 MM, GRAIN BELTS KLINGSPOR: 40, 60, 80, 100, 120, 150, 180, UNUSED.
Vendedor: OCHMANN Holzbearbeitungsmaschinen
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer bollegraaf<br/>typ hbc 80 k<br/>year of construction 2010<br/>hours of operation 33,931 hours<br/>press power main press 86 tons by 275 bar<br/>press power of pre-press max. 42 tons<br/>feed channel 1,485 x 1,100 mm<br/>filling volume 2.9 m³<br/>theoretic cycle time 22 sec.<br/>theoretic throughput capacity up to 450 m³/hour<br/>bale size 1,100 x 720 mm, lenght variable<br/>driving motor 45 kw<br/>connected load 60 kw<br/>tying system 5-fold vertical, 3-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx. 13 tons/hour<br/>bulk weight of 50 kg/cbm  approx. 20 tons/hour<br/>bulk weight of 100 kg/cbm  approx. 30 tons/hour<br/>throughput rate with ruffler  approx. 20 tons/hour<br/>bale weight 550 up to 750 kg, depends on material<br/>volume hydraulic oil tank 830 l<br/>sps controller (manuf., type) schneider<br/>operating panel (manuf., type) schneider magnelis<br/>transport dimensions only baler 10,900 x 2,320 x 3,150 mm (l x w x h)<br/>machine weight baler approx. 24 tons<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER BOLLEGRAAF
TYP HBC 80 K
YEAR OF CONSTRUCTION 2010
HOURS OF OPERATION 33,931 HOURS
PRESS POWER MAIN PRESS 86 TONS BY 275 BAR
PRESS POWER OF PRE-PRESS MAX. 42 TONS
FEED CHANNEL 1,485 X 1,100 MM
FILLING VOLUME 2.9 M³
THEORETIC CYCLE TIME 22 SEC.
THEORETIC THROUGHPUT CAPACITY UP TO 450 M³/HOUR
BALE SIZE 1,100 X 720 MM, LENGHT VARIABLE
DRIVING MOTOR 45 KW
CONNECTED LOAD 60 KW
TYING SYSTEM 5-FOLD VERTICAL, 3-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 13 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM APPROX. 20 TONS/HOUR
BULK WEIGHT OF 100 KG/CBM APPROX. 30 TONS/HOUR
THROUGHPUT RATE WITH RUFFLER APPROX. 20 TONS/HOUR
BALE WEIGHT 550 UP TO 750 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 830 L
SPS CONTROLLER (MANUF., TYPE) SCHNEIDER
OPERATING PANEL (MANUF., TYPE) SCHNEIDER MAGNELIS
TRANSPORT DIMENSIONS ONLY BALER 10,900 X 2,320 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 24 TONS

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-pneumatic dovetail cutter / nutfrã¤smaschine hoffmann type pu 2 vh, milling group for a keyway per working cycle vertically or horizontally, foot switch, engine: 1.7 kw, year 2004, passage height: 250 mm, depth vertical / horizontal: 180 mm / 250 mm, incl. roller conveyor. PNEUMATIC DOVETAIL CUTTER / NUTFR&ATILDE;&CURREN;SMASCHINE HOFFMANN TYPE PU 2 VH, MILLING GROUP FOR A KEYWAY PER WORKING CYCLE VERTICALLY OR HORIZONTALLY, FOOT SWITCH, ENGINE: 1.7 KW, YEAR 2004, PASSAGE HEIGHT: 250 MM, DEPTH VERTICAL / HORIZONTAL: 180 MM / 250 MM, INCL. ROLLER CONVEYOR.
Vendedor: OCHMANN Holzbearbeitungsmaschinen
Año de construcción: usado
Ubicación: Land-manufacturer hsm<br/>type vk 75 / 1600<br/>year of construction 1998<br/>hours of operation 54,412 hours<br/>press power main press 75 tons<br/>specific press capacity 99,2 n/cm²<br/>feed channel 720 x 1,600 mm (w x l)<br/>capacity per cycle time 1,21 m³<br/>theoretic cycle time 14,4 sec.<br/>theoretic  throughput rate 339 m³/h<br/>bale size 720 x 1,050 x 600 up to 1,200 mm (w x h x l)<br/>driving motor 55 kw, 500v, 50 hz, 79 a<br/>connected load 64 kw, 500 v, 98 a<br/>tying system 5-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 6,8 tons/h<br/>bulk weight of 50 kg/cbm up to 16,9 tons/h<br/>bale weight up to 620 kg/bale, depends on material<br/>volume hydraulic oil tank 1,250 l<br/>sps controller (manuf., type) siemens simatic s7 300<br/>operating panel (manuf., type)  siemens simatic multi panel<br/>transport dimensions only baler 6,180 x 2,250 x 3,260 mm (l x w x h)<br/>machine weight baler approx. 15,5 tons<br/>condition of the baler:<br/>the machine is in good condition, has been regularly serviced and is ready for immediate use.<br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER HSM
TYPE VK 75 / 1600
YEAR OF CONSTRUCTION 1998
HOURS OF OPERATION 54,412 HOURS
PRESS POWER MAIN PRESS 75 TONS
SPECIFIC PRESS CAPACITY 99,2 N/CM²
FEED CHANNEL 720 X 1,600 MM (W X L)
CAPACITY PER CYCLE TIME 1,21 M³
THEORETIC CYCLE TIME 14,4 SEC.
THEORETIC THROUGHPUT RATE 339 M³/H
BALE SIZE 720 X 1,050 X 600 UP TO 1,200 MM (W X H X L)
DRIVING MOTOR 55 KW, 500V, 50 HZ, 79 A
CONNECTED LOAD 64 KW, 500 V, 98 A
TYING SYSTEM 5-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 6,8 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 16,9 TONS/H
BALE WEIGHT UP TO 620 KG/BALE, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 1,250 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS SIMATIC S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC MULTI PANEL
TRANSPORT DIMENSIONS ONLY BALER 6,180 X 2,250 X 3,260 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 15,5 TONS
CONDITION OF THE BALER:
THE MACHINE IS IN GOOD CONDITION, HAS BEEN REGULARLY SERVICED AND IS READY FOR IMMEDIATE USE.
COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 3.400 €
Ubicación: Land-code: 0575
brand: osama
model: s2r   - ce standard 

automatic glue spreader with 2 rollers - ce standard 

working width mm 1300
useful working height mm 100
diameter of rollers mm 185
feed speed mt/min 18
motor power kw 0,37
worktable height mm 800 
overall dimensions : mm 2000 x 780 x 1350 h
weight kg 340



 CODE: 0575 BRAND: OSAMA MODEL: S2R - CE STANDARD AUTOMATIC GLUE SPREADER WITH 2 ROLLERS - CE STANDARD WORKING WIDTH MM 1300 USEFUL WORKING HEIGHT MM 100 DIAMETER OF ROLLERS MM 185 FEED SPEED MT/MIN 18 MOTOR POWER KW 0,37 WORKTABLE HEIGHT MM 800 OVERALL DIMENSIONS : MM 2000 X 780 X 1350 H WEIGHT KG 340
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>type hbc 140 k<br/>year of construction 1999<br/>working hours 83,877 hours<br/>press power main press 140 tons<br/>press power of pre-press 70 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 4,34 cbm<br/>theoretic cycle time 16 sec.<br/>bale size 1,100 x 1,100 mm (w x h) length adjustable<br/>driving motor 2 x 75 kw<br/>connected load 209 kw<br/>tying system 5 fold vertical, 5 fold horizontal, fully automated<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 30 tons/h<br/>bulk weight of 50 kg/cbm approx. 46 tons/h<br/>bulk weight of 100 kg/cbm approx. 82 tons/h<br/>bale weight 850 up to 1,500 kg<br/>baler dimensions built up with hopper approx.13,200 x 2,750 x 5,020    mm (l x w x h)<br/>transport dimensions only baler approx.1,200 x 2,750 x 3,400 mm (l x w x h)<br/>machine weight baler approx. 43 tons<br/> <br/>comments: one of the two pumps is defective. the plc has already been renewed and replaced with a schneider magnelis touch panel. inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors.<br/>documentation (manual, ce, electr./hydr.-drawings, etc.) the technical documentation is complete. MANUFACTURER BOLLEGRAAF
TYPE HBC 140 K
YEAR OF CONSTRUCTION 1999
WORKING HOURS 83,877 HOURS
PRESS POWER MAIN PRESS 140 TONS
PRESS POWER OF PRE-PRESS 70 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 4,34 CBM
THEORETIC CYCLE TIME 16 SEC.
BALE SIZE 1,100 X 1,100 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 2 X 75 KW
CONNECTED LOAD 209 KW
TYING SYSTEM 5 FOLD VERTICAL, 5 FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 30 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 46 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 82 TONS/H
BALE WEIGHT 850 UP TO 1,500 KG
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX.13,200 X 2,750 X 5,020 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX.1,200 X 2,750 X 3,400 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 43 TONS

COMMENTS: ONE OF THE TWO PUMPS IS DEFECTIVE. THE PLC HAS ALREADY BEEN RENEWED AND REPLACED WITH A SCHNEIDER MAGNELIS TOUCH PANEL. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS, ETC.) THE TECHNICAL DOCUMENTATION IS COMPLETE.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 240 €
Ubicación: Land-air saw wã?rth type dst 380. AIR SAW W&ATILDE;?RTH TYPE DST 380.
Vendedor: OCHMANN Holzbearbeitungsmaschinen
Año de construcción: usado
Precio: 29.500 €
Ubicación: Land-manufacturer hsm<br/>type vk 4012<br/>year of construction 2003<br/>hours of operation 18,158 hours<br/>quantity of pressed bales 71,479 bales<br/>press power main press 45 tons<br/>specific press capacity 69,4 n/cm²<br/>feed channel 820 x 1,250 mm (w x l)<br/>capacity per cycle time 0,81 m³<br/>theoretic cycle time 17 sec.<br/>theoretic  throughput rate 174 m³/h<br/>bale size 900 x 720 x 600 up to 1,200 mm (w x h x l)<br/>driving motor 15 kw<br/>connected load 18 kw, 500 v, 50 hz, 30 a<br/>tying system 3-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 3,5 tons/h<br/>bulk weight of 50 kg/cbm up to 8,7 tons/h<br/>bale weight up to 400 kg/bale, depends on material<br/>volume hydraulic oil tank 300 l<br/>sps controller (manuf., type) siemens simatic s7 300<br/>operating panel (manuf., type)  siemens simatic hmi<br/>transport dimensions only baler 6,180 x 2,250 x 2,350 mm (l x w x h)<br/>machine weight baler approx. 7 tons<br/>condition of the baler:<br/>the machine is in good condition, has been regularly serviced and is ready for immediate use.<br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER HSM
TYPE VK 4012
YEAR OF CONSTRUCTION 2003
HOURS OF OPERATION 18,158 HOURS
QUANTITY OF PRESSED BALES 71,479 BALES
PRESS POWER MAIN PRESS 45 TONS
SPECIFIC PRESS CAPACITY 69,4 N/CM²
FEED CHANNEL 820 X 1,250 MM (W X L)
CAPACITY PER CYCLE TIME 0,81 M³
THEORETIC CYCLE TIME 17 SEC.
THEORETIC THROUGHPUT RATE 174 M³/H
BALE SIZE 900 X 720 X 600 UP TO 1,200 MM (W X H X L)
DRIVING MOTOR 15 KW
CONNECTED LOAD 18 KW, 500 V, 50 HZ, 30 A
TYING SYSTEM 3-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 3,5 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 8,7 TONS/H
BALE WEIGHT UP TO 400 KG/BALE, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 300 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS SIMATIC S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC HMI
TRANSPORT DIMENSIONS ONLY BALER 6,180 X 2,250 X 2,350 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 7 TONS
CONDITION OF THE BALER:
THE MACHINE IS IN GOOD CONDITION, HAS BEEN REGULARLY SERVICED AND IS READY FOR IMMEDIATE USE.
COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-spindle moulder griggio line azzurra mod. t 90 secondhand

working table size mm.480 x 1000

spindle moulder at 4 speeds rpm1400 3500 6000 8000

motor power kw 3 ( hp4)

year of production 2008

ce





 SPINDLE MOULDER GRIGGIO LINE AZZURRA MOD. T 90 SECONDHAND WORKING TABLE SIZE MM.480 X 1000 SPINDLE MOULDER AT 4 SPEEDS RPM1400 3500 6000 8000 MOTOR POWER KW 3 ( HP4) YEAR OF PRODUCTION 2008 CE
Vendedor: VERGA ERCOLE di Roberto Verga & C. S.A.S
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer europress<br/>typ 6500 v5 h3<br/>year of construction 2009<br/>hours of operation 15,334 hours, stand january <br/>quantity of pressed bales 138,097 bales, stand january<br/>press power main press 120 tons<br/>specific press capacity 142 kg/cm²<br/>feed channel 1,650 x 1,100 mm (l x w)<br/>filling volume 3 m³<br/>capacity per cycle time 1,58 m³<br/>bale size 730 x 1,100 length variable<br/>driving motor 75 kw (1 x 30 kw + 1 x 45 kw, individually switchable)<br/>connected load 83 kw<br/>current consumption 150 a<br/>tying system 5-fold vertical, 3-fold horizontal, fully automatic (the uppermost horizontal needle channel is blocked)<br/>bale weight 450 to 900 kg, depending on bale length and material<br/>volume hydraulic oil tank 1,200 l<br/>sps controller (manuf., type)  siemens s7-200<br/>operating panel (manuf., type)  siemens touchscreen<br/>baler dimensions built up with hopper 13,465 x 5,200 x 5,074 mm<br/>transport dimensions only baler 9,965 x 2,500 x 2,900 mm (l x w x h)<br/>machine weight baler approx. 38 tons<br/><br/>technical data conveyor belt<br/>manufacturer<br/>typ kgf 1600<br/>year of construction 2009<br/>driving motor 7,5 kw<br/>belt speed 0,3 m/sec.<br/>centre distance 13,550 mm<br/>length feeding conveyor 6.100 mm<br/>length elevating conveyor 9.507 mm<br/>length goose neck 1,002 mm<br/>grade 30°<br/>effecting width 1,600 mm<br/>height drive axle over ground 4,000 mm<br/>height of side wall feeding conv. 600 mm<br/>height of side wall elevating conv. 800 mm<br/>pit dimensions 10,030 x 2,460 x 1,250 mm (l x w x d)<br/>weight approx. 28 tons<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  the press with conveyor belt is currently still in operation, the replacement with a new system is planned for the 2nd quarter of this year. inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER EUROPRESS
TYP 6500 V5 H3
YEAR OF CONSTRUCTION 2009
HOURS OF OPERATION 15,334 HOURS, STAND JANUARY
QUANTITY OF PRESSED BALES 138,097 BALES, STAND JANUARY
PRESS POWER MAIN PRESS 120 TONS
SPECIFIC PRESS CAPACITY 142 KG/CM²
FEED CHANNEL 1,650 X 1,100 MM (L X W)
FILLING VOLUME 3 M³
CAPACITY PER CYCLE TIME 1,58 M³
BALE SIZE 730 X 1,100 LENGTH VARIABLE
DRIVING MOTOR 75 KW (1 X 30 KW + 1 X 45 KW, INDIVIDUALLY SWITCHABLE)
CONNECTED LOAD 83 KW
CURRENT CONSUMPTION 150 A
TYING SYSTEM 5-FOLD VERTICAL, 3-FOLD HORIZONTAL, FULLY AUTOMATIC (THE UPPERMOST HORIZONTAL NEEDLE CHANNEL IS BLOCKED)
BALE WEIGHT 450 TO 900 KG, DEPENDING ON BALE LENGTH AND MATERIAL
VOLUME HYDRAULIC OIL TANK 1,200 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS S7-200
OPERATING PANEL (MANUF., TYPE) SIEMENS TOUCHSCREEN
BALER DIMENSIONS BUILT UP WITH HOPPER 13,465 X 5,200 X 5,074 MM
TRANSPORT DIMENSIONS ONLY BALER 9,965 X 2,500 X 2,900 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 38 TONS

TECHNICAL DATA CONVEYOR BELT
MANUFACTURER
TYP KGF 1600
YEAR OF CONSTRUCTION 2009
DRIVING MOTOR 7,5 KW
BELT SPEED 0,3 M/SEC.
CENTRE DISTANCE 13,550 MM
LENGTH FEEDING CONVEYOR 6.100 MM
LENGTH ELEVATING CONVEYOR 9.507 MM
LENGTH GOOSE NECK 1,002 MM
GRADE 30°
EFFECTING WIDTH 1,600 MM
HEIGHT DRIVE AXLE OVER GROUND 4,000 MM
HEIGHT OF SIDE WALL FEEDING CONV. 600 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 800 MM
PIT DIMENSIONS 10,030 X 2,460 X 1,250 MM (L X W X D)
WEIGHT APPROX. 28 TONS

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. THE PRESS WITH CONVEYOR BELT IS CURRENTLY STILL IN OPERATION, THE REPLACEMENT WITH A NEW SYSTEM IS PLANNED FOR THE 2ND QUARTER OF THIS YEAR. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-5-axes cnc working center - cms avant 1b/560-px5
year of manufacturing 2006
ce standard
no. 5 axes controlled
axes strokes: x=5600mm y=2350mm z=720mm b=+/-120° c=+/-270°
working area 5220x1520 mm
px5 5-axes unit - hsk63f collect - power 12 kw (16,3 hp) - liquid cooled - max rotation 24000 rpm - pneumatic brakes on b and c axes
no. 3 tool changer disks on y carriage with no. 16 positions each (no. 48 total positions)
vertical and horizontal drilling unit with 7+2+2 pences
working table with no. 8 schmalz clamps/cups support - no. 8+2 frontal/lateral reference stops - no. 8 bars for pieces lifting
motorized belt for chips extraction
no. 12 suction cups 145x35x150h mm - no. 12 suction cups 145x145x150h mm - no. 10 vertical clamps h 150 mm - n. 2 horizontal clamps
no. 2 vacuum pump 250 m3/h each
automatic lubrication
cnc osai serie 10/510i with panel control on movable carriege
air conditioner for electric cabinet
frontal bumper + surrounding metal fences 
tools and toolholders not included
user and mantainance manuals
area of installed machine 10000x6500x3800h mm
total power supply 45kva
machine tested (video available upon request) 5-AXES CNC WORKING CENTER - CMS AVANT 1B/560-PX5 YEAR OF MANUFACTURING 2006 CE STANDARD NO. 5 AXES CONTROLLED AXES STROKES: X=5600MM Y=2350MM Z=720MM B=+/-120° C=+/-270° WORKING AREA 5220X1520 MM PX5 5-AXES UNIT - HSK63F COLLECT - POWER 12 KW (16,3 HP) - LIQUID COOLED - MAX ROTATION 24000 RPM - PNEUMATIC BRAKES ON B AND C AXES NO. 3 TOOL CHANGER DISKS ON Y CARRIAGE WITH NO. 16 POSITIONS EACH (NO. 48 TOTAL POSITIONS) VERTICAL AND HORIZONTAL DRILLING UNIT WITH 7+2+2 PENCES WORKING TABLE WITH NO. 8 SCHMALZ CLAMPS/CUPS SUPPORT - NO. 8+2 FRONTAL/LATERAL REFERENCE STOPS - NO. 8 BARS FOR PIECES LIFTING MOTORIZED BELT FOR CHIPS EXTRACTION NO. 12 SUCTION CUPS 145X35X150H MM - NO. 12 SUCTION CUPS 145X145X150H MM - NO. 10 VERTICAL CLAMPS H 150 MM - N. 2 HORIZONTAL CLAMPS NO. 2 VACUUM PUMP 250 M3/H EACH AUTOMATIC LUBRICATION CNC OSAI SERIE 10/510I WITH PANEL CONTROL ON MOVABLE CARRIEGE AIR CONDITIONER FOR ELECTRIC CABINET FRONTAL BUMPER + SURROUNDING METAL FENCES TOOLS AND TOOLHOLDERS NOT INCLUDED USER AND MANTAINANCE MANUALS AREA OF INSTALLED MACHINE 10000X6500X3800H MM TOTAL POWER SUPPLY 45KVA MACHINE TESTED (VIDEO AVAILABLE UPON REQUEST)
Vendedor: Artuso Trading & Tech s.r.l.
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>typ hbc 110<br/>year of construction 2005<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 3,15 cbm<br/>theoretic cycle time 19 sec.<br/>bale size 1,100 x 1,100 mm (w x h) length adjustable<br/>driving motor 75 kw<br/>tying system  5-fold horizontal, fully automated<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 16 tons/h<br/>bulk weight of 50 kg/cbm approx. 25 tons/h<br/>bulk weight of 100 kg/cbm approx. 47 tons/h<br/>bale weight 850 up to 1.400 kg<br/>hydralicoil 1,200 l<br/>baler dimensions built up with hopper approx.11,750 x 2,250 x 6,690   mm (l x w x h)<br/>transport dimensions only baler approx.11,750 x 2,250 x 3,150   mm (l x w x h)<br/>machine weight baler 36 tons<br/>comments this machine has a 5-fold horizontal binding system for difficult to press materials such as pet bottles and residual waste. in addition, the baler is equipped with a perforator for pet bottles.<br/>inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYP HBC 110
YEAR OF CONSTRUCTION 2005
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 3,15 CBM
THEORETIC CYCLE TIME 19 SEC.
BALE SIZE 1,100 X 1,100 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 75 KW
TYING SYSTEM 5-FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 16 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 25 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 47 TONS/H
BALE WEIGHT 850 UP TO 1.400 KG
HYDRALICOIL 1,200 L
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX.11,750 X 2,250 X 6,690 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX.11,750 X 2,250 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER 36 TONS
COMMENTS THIS MACHINE HAS A 5-FOLD HORIZONTAL BINDING SYSTEM FOR DIFFICULT TO PRESS MATERIALS SUCH AS PET BOTTLES AND RESIDUAL WASTE. IN ADDITION, THE BALER IS EQUIPPED WITH A PERFORATOR FOR PET BOTTLES.
INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 2.800 €
Ubicación: Land-used set up
int. machine number: m2748
manufacturer martin
type t 51

planing width 510 mm
task table length 1,400 mm
tax table length 1,100 mm
weight 850 kg
total length approx. 2.75 m
4-drum
slotted table lips
hydraulic table adjustment
with gauge and various knives

item location: 58730 frã¶ndenberg/ruhr

the machine can be visited like to see power and tried out.

we will gladly send you more photos by e-mail.

a forklift/crane for loading is available.

we reserve the right to a sale.

there is the way learned to examine suburb for sale articles. specific questions should be clarified in advance. the information, technical data, dimensions, year, condition are non-binding and were shown to the best of my knowledge and belief. errors are reserved. the warranty / guarantee is excluded. the goods will be sold from location / camp, with national transfer of risk to the buyer, this also applies to a shipping from us, which we have carried out on your behalf. this offer is only to traders, merchants and legal persons.
specified trade names, and trademarks are property of their owners and are used only for identification and description of products.

the structure and the electrical connection of the machine / the device must be carried out by a qualified person trained or checked.

see also my other offers.

the article must be paid unless otherwise agreed within 14 days of invoice creation and picked up.
otherwise, the cost of the storage charge must be made. USED SET UP INT. MACHINE NUMBER: M2748 MANUFACTURER MARTIN TYPE T 51 PLANING WIDTH 510 MM TASK TABLE LENGTH 1,400 MM TAX TABLE LENGTH 1,100 MM WEIGHT 850 KG TOTAL LENGTH APPROX. 2.75 M 4-DRUM SLOTTED TABLE LIPS HYDRAULIC TABLE ADJUSTMENT WITH GAUGE AND VARIOUS KNIVES ITEM LOCATION: 58730 FR&ATILDE;&PARA;NDENBERG/RUHR THE MACHINE CAN BE VISITED LIKE TO SEE POWER AND TRIED OUT. WE WILL GLADLY SEND YOU MORE PHOTOS BY E-MAIL. A FORKLIFT/CRANE FOR LOADING IS AVAILABLE. WE RESERVE THE RIGHT TO A SALE. THERE IS THE WAY LEARNED TO EXAMINE SUBURB FOR SALE ARTICLES. SPECIFIC QUESTIONS SHOULD BE CLARIFIED IN ADVANCE. THE INFORMATION, TECHNICAL DATA, DIMENSIONS, YEAR, CONDITION ARE NON-BINDING AND WERE SHOWN TO THE BEST OF MY KNOWLEDGE AND BELIEF. ERRORS ARE RESERVED. THE WARRANTY / GUARANTEE IS EXCLUDED. THE GOODS WILL BE SOLD FROM LOCATION / CAMP, WITH NATIONAL TRANSFER OF RISK TO THE BUYER, THIS ALSO APPLIES TO A SHIPPING FROM US, WHICH WE HAVE CARRIED OUT ON YOUR BEHALF. THIS OFFER IS ONLY TO TRADERS, MERCHANTS AND LEGAL PERSONS. SPECIFIED TRADE NAMES, AND TRADEMARKS ARE PROPERTY OF THEIR OWNERS AND ARE USED ONLY FOR IDENTIFICATION AND DESCRIPTION OF PRODUCTS. THE STRUCTURE AND THE ELECTRICAL CONNECTION OF THE MACHINE / THE DEVICE MUST BE CARRIED OUT BY A QUALIFIED PERSON TRAINED OR CHECKED. SEE ALSO MY OTHER OFFERS. THE ARTICLE MUST BE PAID UNLESS OTHERWISE AGREED WITHIN 14 DAYS OF INVOICE CREATION AND PICKED UP. OTHERWISE, THE COST OF THE STORAGE CHARGE MUST BE MADE.
Vendedor: Fritz Ernst Maschinenhandel e K
Año de construcción: usado
Ubicación: Land-technical data conveyor belt<br/>manufacturer not known<br/>typ  kgf 800-1200<br/>year of construction 2018<br/>driving motor 5,5 kw, 400 v, 10,5 a, yoc 2017<br/>length feeding conveyor 4,970 mm<br/>length elevating conveyor 13,400 mm<br/>length goose neck 2,530 mm<br/>grade 30°<br/>height of drive axle above ground approx. 6,400 mm<br/>effecting width 1,170 mm<br/>height of side wall feeding conv. 530 mm<br/>height of side wall elevating conv. 800 mm<br/>transport dimensions feeding conveyor 7,000 x 1,700 x 1,800 mm (l x w x h)<br/>transport dimensions elevating conveyor 13,400 x 2,300 x 2,400 mm (l x w x h)<br/>weight approx. 9 tons<br/><br/>condition of the conveyor belt:<br/>the chain belt conveyor was completely overhauled in 2018 and rebuilt with new components. the frame and all attachments are sandblasted, primed and painted. the following components were renewed:<br/>the frame parts with the running surfaces for the chains, the chains, the sprockets, the traverses and the belt. the sew eurodrive engine with gearbox was built in 2017.<br/><br/>comments:<br/>inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA CONVEYOR BELT
MANUFACTURER NOT KNOWN
TYP KGF 800-1200
YEAR OF CONSTRUCTION 2018
DRIVING MOTOR 5,5 KW, 400 V, 10,5 A, YOC 2017
LENGTH FEEDING CONVEYOR 4,970 MM
LENGTH ELEVATING CONVEYOR 13,400 MM
LENGTH GOOSE NECK 2,530 MM
GRADE 30°
HEIGHT OF DRIVE AXLE ABOVE GROUND APPROX. 6,400 MM
EFFECTING WIDTH 1,170 MM
HEIGHT OF SIDE WALL FEEDING CONV. 530 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 800 MM
TRANSPORT DIMENSIONS FEEDING CONVEYOR 7,000 X 1,700 X 1,800 MM (L X W X H)
TRANSPORT DIMENSIONS ELEVATING CONVEYOR 13,400 X 2,300 X 2,400 MM (L X W X H)
WEIGHT APPROX. 9 TONS

CONDITION OF THE CONVEYOR BELT:
THE CHAIN BELT CONVEYOR WAS COMPLETELY OVERHAULED IN 2018 AND REBUILT WITH NEW COMPONENTS. THE FRAME AND ALL ATTACHMENTS ARE SANDBLASTED, PRIMED AND PAINTED. THE FOLLOWING COMPONENTS WERE RENEWED:
THE FRAME PARTS WITH THE RUNNING SURFACES FOR THE CHAINS, THE CHAINS, THE SPROCKETS, THE TRAVERSES AND THE BELT. THE SEW EURODRIVE ENGINE WITH GEARBOX WAS BUILT IN 2017.

COMMENTS:
INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-multirip saw cml model sca320-t350 with:
- feeding chain 350mm in very good state
- useful cutting width 320mm
- useful cutting height 120mm
- max blades diameter d=350mm
- blades motor kw 37 / hp 50
- variable feeding speed
- laser for cutting line visualization
machine at ce norms MULTIRIP SAW CML MODEL SCA320-T350 WITH: - FEEDING CHAIN 350MM IN VERY GOOD STATE - USEFUL CUTTING WIDTH 320MM - USEFUL CUTTING HEIGHT 120MM - MAX BLADES DIAMETER D=350MM - BLADES MOTOR KW 37 / HP 50 - VARIABLE FEEDING SPEED - LASER FOR CUTTING LINE VISUALIZATION MACHINE AT CE NORMS
Vendedor: Baldin SRL
Año de construcción: usado
Ubicación: Land-technical data bunker chain belt conveyor<br/>manufacturer bollegraaf<br/>typ hbt 600/1000<br/>year of construction 1999<br/>driving motor 0,22 up to 0,9 kw<br/>belt speed 1,4 m/sec.<br/>bunker volume approx. 21 m³<br/>length feeding conveyor 10,940 mm<br/>effecting width 990 mm<br/>height of side wall feeding conv. 1,960 mm<br/>transport dimensions over all 1,.950 x 1,600 x 2,650<br/>weight approx. 7,700 kg<br/><br/>remarks:<br/>the bunker belt comes from a paper sorting plant, shows very little wear and tear and is in a really good condition. there are currently 3 pieces of bunker belts for sale. a inspection is possible by appointment. we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BUNKER CHAIN BELT CONVEYOR
MANUFACTURER BOLLEGRAAF
TYP HBT 600/1000
YEAR OF CONSTRUCTION 1999
DRIVING MOTOR 0,22 UP TO 0,9 KW
BELT SPEED 1,4 M/SEC.
BUNKER VOLUME APPROX. 21 M³
LENGTH FEEDING CONVEYOR 10,940 MM
EFFECTING WIDTH 990 MM
HEIGHT OF SIDE WALL FEEDING CONV. 1,960 MM
TRANSPORT DIMENSIONS OVER ALL 1,.950 X 1,600 X 2,650
WEIGHT APPROX. 7,700 KG

REMARKS:
THE BUNKER BELT COMES FROM A PAPER SORTING PLANT, SHOWS VERY LITTLE WEAR AND TEAR AND IS IN A REALLY GOOD CONDITION. THERE ARE CURRENTLY 3 PIECES OF BUNKER BELTS FOR SALE. A INSPECTION IS POSSIBLE BY APPOINTMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 3.200 €
Ubicación: Land-code: 0574
brand: minimax scm
model: ls 3000 - ce standard 

belt sanding machine  with double goose neck - with 3 motors - with suction bag - ce standard

table  length  mm 3000
table width  mm  1100
automatic table  lifting    stroke  mm 580 
2-speeds belt motor
suction motor
sanding belt  lenght mm 8100
pulleys diameter mm  250 
overall dimensions:  mm 4150 x 1500 x 1600 h
weight  kg 485



 CODE: 0574 BRAND: MINIMAX SCM MODEL: LS 3000 - CE STANDARD BELT SANDING MACHINE WITH DOUBLE GOOSE NECK - WITH 3 MOTORS - WITH SUCTION BAG - CE STANDARD TABLE LENGTH MM 3000 TABLE WIDTH MM 1100 AUTOMATIC TABLE LIFTING STROKE MM 580 2-SPEEDS BELT MOTOR SUCTION MOTOR SANDING BELT LENGHT MM 8100 PULLEYS DIAMETER MM 250 OVERALL DIMENSIONS: MM 4150 X 1500 X 1600 H WEIGHT KG 485
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-manufacturer avermann<br/>typ avos bp 1410 s 37-70<br/>year of construction 2003<br/>working hours 17,532 h<br/>press power main press 70 tons<br/>specific press capacity 90,9 n/cm²<br/>feed channel 1.400 x 1.000 mm (l x w)<br/>theoretic cycle time 10 sec.<br/>throughput rate   360 cbm/h<br/>bale size 1.100 x 700 mm (w x h) length adjustable<br/>driving motor 37 kw<br/>tying system 4-fold vertical, fully automated<br/>throughput rate max. approx. 15 tons/h<br/>bale weight until 550 kg<br/>baler dimensions built up with hopper approx. 8,390 x 2,355 x 3,780  mm (l x w x h)<br/>transport dimensions only baler approx. 8,390 x 2,355 x 2,800 mm (l x w x h)<br/>machine weight baler approx. 15 tons<br/> <br/>comments: the machine was overhauled end of 2018 and tested with material. <br/>as an optional extra, the press was equipped with a special ram, which only opens the needle slots hydraulically during the binding phase. with this feature the press is able to press difficult materials and reliably tie up.<br/><br/>inspections are possible after agreement. we will not assume liability for the given technical data and possible errors. MANUFACTURER AVERMANN
TYP AVOS BP 1410 S 37-70
YEAR OF CONSTRUCTION 2003
WORKING HOURS 17,532 H
PRESS POWER MAIN PRESS 70 TONS
SPECIFIC PRESS CAPACITY 90,9 N/CM²
FEED CHANNEL 1.400 X 1.000 MM (L X W)
THEORETIC CYCLE TIME 10 SEC.
THROUGHPUT RATE 360 CBM/H
BALE SIZE 1.100 X 700 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 37 KW
TYING SYSTEM 4-FOLD VERTICAL, FULLY AUTOMATED
THROUGHPUT RATE MAX. APPROX. 15 TONS/H
BALE WEIGHT UNTIL 550 KG
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX. 8,390 X 2,355 X 3,780 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX. 8,390 X 2,355 X 2,800 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 15 TONS

COMMENTS: THE MACHINE WAS OVERHAULED END OF 2018 AND TESTED WITH MATERIAL.
AS AN OPTIONAL EXTRA, THE PRESS WAS EQUIPPED WITH A SPECIAL RAM, WHICH ONLY OPENS THE NEEDLE SLOTS HYDRAULICALLY DURING THE BINDING PHASE. WITH THIS FEATURE THE PRESS IS ABLE TO PRESS DIFFICULT MATERIALS AND RELIABLY TIE UP.

INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-wmw
machine name  thread rolling machine
manufacturer  wmw
model na
location  mumbai
year of manufacturing 
technical specification 
max. length of thread	2000.0 mm
max. thrust 12.5 t
min/max of thread 70
motor power WMW MACHINE NAME THREAD ROLLING MACHINE MANUFACTURER WMW MODEL NA LOCATION MUMBAI YEAR OF MANUFACTURING TECHNICAL SPECIFICATION MAX. LENGTH OF THREAD 2000.0 MM MAX. THRUST 12.5 T MIN/MAX OF THREAD 70 MOTOR POWER
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Precio: 39.500 €
Ubicación: Land-manufacturer avermann<br/>typ  avos 1810s-90/100<br/>year of construction 2005<br/>hours of operation 23,072 h<br/>quantity of pressed bales 16,163 piece<br/>press power main press 100 tons<br/>specific press capacity 121,2 n/cm²<br/>feed channel 1,000 x 1,800 mm<br/>capacity per cycle time 1,35 cm³<br/>theoretic cycle time 12,5 sec.<br/>bale size 1,100 x 750 mm<br/>driving motor 2 x 45 kw<br/>connected load 130 kw<br/>tying system 5 fold vertical, full automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx. 12,2 tons/h<br/>bulk weight of 50 kg/cbm  approx. 16,0 tons/h<br/>bulk weight of 100 kg/cbm  approx. 23,2 tons/h<br/>bale weight 500 up to 800 kg, depends on material and bale length<br/>volume hydraulic oil tank 2,000 l<br/>sps controller (manuf., type)  siemens simatic s7-300<br/>transport dimensions only baler 11.200 x 2.355 x 2.700 mm (without feeding chute)<br/>machine weight baler approx. 24,5 tons<br/>accessories: ruffler and special press ram<br/><br/>comments:<br/>the machine is equipped with a special pressing ram, which opens the needle slots hydraulically only during the binding process. with this feature the press is able to press difficult materials and reliably tie up.<br/><br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER AVERMANN
TYP AVOS 1810S-90/100
YEAR OF CONSTRUCTION 2005
HOURS OF OPERATION 23,072 H
QUANTITY OF PRESSED BALES 16,163 PIECE
PRESS POWER MAIN PRESS 100 TONS
SPECIFIC PRESS CAPACITY 121,2 N/CM²
FEED CHANNEL 1,000 X 1,800 MM
CAPACITY PER CYCLE TIME 1,35 CM³
THEORETIC CYCLE TIME 12,5 SEC.
BALE SIZE 1,100 X 750 MM
DRIVING MOTOR 2 X 45 KW
CONNECTED LOAD 130 KW
TYING SYSTEM 5 FOLD VERTICAL, FULL AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 12,2 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 16,0 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 23,2 TONS/H
BALE WEIGHT 500 UP TO 800 KG, DEPENDS ON MATERIAL AND BALE LENGTH
VOLUME HYDRAULIC OIL TANK 2,000 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS SIMATIC S7-300
TRANSPORT DIMENSIONS ONLY BALER 11.200 X 2.355 X 2.700 MM (WITHOUT FEEDING CHUTE)
MACHINE WEIGHT BALER APPROX. 24,5 TONS
ACCESSORIES: RUFFLER AND SPECIAL PRESS RAM

COMMENTS:
THE MACHINE IS EQUIPPED WITH A SPECIAL PRESSING RAM, WHICH OPENS THE NEEDLE SLOTS HYDRAULICALLY ONLY DURING THE BINDING PROCESS. WITH THIS FEATURE THE PRESS IS ABLE TO PRESS DIFFICULT MATERIALS AND RELIABLY TIE UP.

THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-stanko
machine name  thread rolling machine
manufacturer  stanko
model na
location  mumbai
year of manufacturing 
technical specification 
25 tons STANKO MACHINE NAME THREAD ROLLING MACHINE MANUFACTURER STANKO MODEL NA LOCATION MUMBAI YEAR OF MANUFACTURING TECHNICAL SPECIFICATION 25 TONS
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>type hbc 100<br/>year of construction 1991, 2017 overhauled<br/>hours of operation 40,586 hours<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 3,15 m³<br/>theoretic cycle time 22 sec.<br/>bale size 750 x 1,100 mm, length variable<br/>driving motor 2 x 30 kw<br/>tying system 5 fold vertical, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm up to 12 tons/h<br/>bulk weight of 50 kg/cbm up to 25 tons/h<br/>bulk weight of 100 kg/cbm up to 47 tons/h<br/>bale weight 550 up to 850 kg, depends on material<br/>volume hydraulic oil tank 1,200 l<br/>sps controller (manuf., type)  telemecanique tsx micro<br/>operating panel (manuf., type)  schneider magelis touch panel<br/>transport dimensions only baler 11,750 x 2,250 x 3,150 mm (l x w x h)<br/>machine weight baler approx. 30 tons<br/><br/>comments:<br/>the machine has been overhauled. the following work was carried out or parts were replaced.<br/>this press has been overhauled. following steps of repair and overhauling have been taken:<br/><br/>elder sps controls including enter and exit component assemblies were replaced by new controls of telemécanique tsx micro and the input commands in    the touch panel translated into russian.<br/>manual service push buttons were replaced by schneider tft touch panel 7,5? of type magelis.<br/>upper and lower light barriers including repeater (telco) have been renewed.<br/>the electric connection at hydraulic manifold is new, with partially renewed machine control cables and removal of needless connection.<br/>hydraulic oil tank has been emptied, cleaned and all filters were renewed.<br/>rubber gear for diminishing pressure between pumps and electric motors were renewed.<br/>pipes between high pressure part of the pump and hydraulic manifold have been renewed.<br/>cartridge cap on manifold has been sealed up newly.<br/>rubber buffers of pre-press flap are new.<br/>filling level indicator at tank has been renewed.<br/>measurement connections at hydraulic tank were altered.<br/>all flanges of hydraulic pipes have been sealed up newly.<br/>main cylinder, clam shell cylinder, needle cylinder and cylinder for wire core have all been sealed up newly.<br/>plunger of main cylinder, of clam shell cylinder and of needle cylinder have been ground and chrome-plated newly.<br/>all rollers and guide pulleys of press ram have been cleaned and loosened, the front rollers were renewed.<br/>wire guidance was cleaned and loosened, the back wire guidance rollers and wire core with pinhead rollers have been renewed.<br/>pinheads including blades have been reworked.<br/>hinges at press channel, on lateral parts and cap have been renewed.<br/>all hydraulic hoses of clam shell cylinders have been renewed.<br/><br/>inspections in russia, near moscow are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYPE HBC 100
YEAR OF CONSTRUCTION 1991, 2017 OVERHAULED
HOURS OF OPERATION 40,586 HOURS
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 3,15 M³
THEORETIC CYCLE TIME 22 SEC.
BALE SIZE 750 X 1,100 MM, LENGTH VARIABLE
DRIVING MOTOR 2 X 30 KW
TYING SYSTEM 5 FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM UP TO 12 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 25 TONS/H
BULK WEIGHT OF 100 KG/CBM UP TO 47 TONS/H
BALE WEIGHT 550 UP TO 850 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 1,200 L
SPS CONTROLLER (MANUF., TYPE) TELEMECANIQUE TSX MICRO
OPERATING PANEL (MANUF., TYPE) SCHNEIDER MAGELIS TOUCH PANEL
TRANSPORT DIMENSIONS ONLY BALER 11,750 X 2,250 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 30 TONS

COMMENTS:
THE MACHINE HAS BEEN OVERHAULED. THE FOLLOWING WORK WAS CARRIED OUT OR PARTS WERE REPLACED.
THIS PRESS HAS BEEN OVERHAULED. FOLLOWING STEPS OF REPAIR AND OVERHAULING HAVE BEEN TAKEN:

ELDER SPS CONTROLS INCLUDING ENTER AND EXIT COMPONENT ASSEMBLIES WERE REPLACED BY NEW CONTROLS OF TELEMéCANIQUE TSX MICRO AND THE INPUT COMMANDS IN THE TOUCH PANEL TRANSLATED INTO RUSSIAN.
MANUAL SERVICE PUSH BUTTONS WERE REPLACED BY SCHNEIDER TFT TOUCH PANEL 7,5? OF TYPE MAGELIS.
UPPER AND LOWER LIGHT BARRIERS INCLUDING REPEATER (TELCO) HAVE BEEN RENEWED.
THE ELECTRIC CONNECTION AT HYDRAULIC MANIFOLD IS NEW, WITH PARTIALLY RENEWED MACHINE CONTROL CABLES AND REMOVAL OF NEEDLESS CONNECTION.
HYDRAULIC OIL TANK HAS BEEN EMPTIED, CLEANED AND ALL FILTERS WERE RENEWED.
RUBBER GEAR FOR DIMINISHING PRESSURE BETWEEN PUMPS AND ELECTRIC MOTORS WERE RENEWED.
PIPES BETWEEN HIGH PRESSURE PART OF THE PUMP AND HYDRAULIC MANIFOLD HAVE BEEN RENEWED.
CARTRIDGE CAP ON MANIFOLD HAS BEEN SEALED UP NEWLY.
RUBBER BUFFERS OF PRE-PRESS FLAP ARE NEW.
FILLING LEVEL INDICATOR AT TANK HAS BEEN RENEWED.
MEASUREMENT CONNECTIONS AT HYDRAULIC TANK WERE ALTERED.
ALL FLANGES OF HYDRAULIC PIPES HAVE BEEN SEALED UP NEWLY.
MAIN CYLINDER, CLAM SHELL CYLINDER, NEEDLE CYLINDER AND CYLINDER FOR WIRE CORE HAVE ALL BEEN SEALED UP NEWLY.
PLUNGER OF MAIN CYLINDER, OF CLAM SHELL CYLINDER AND OF NEEDLE CYLINDER HAVE BEEN GROUND AND CHROME-PLATED NEWLY.
ALL ROLLERS AND GUIDE PULLEYS OF PRESS RAM HAVE BEEN CLEANED AND LOOSENED, THE FRONT ROLLERS WERE RENEWED.
WIRE GUIDANCE WAS CLEANED AND LOOSENED, THE BACK WIRE GUIDANCE ROLLERS AND WIRE CORE WITH PINHEAD ROLLERS HAVE BEEN RENEWED.
PINHEADS INCLUDING BLADES HAVE BEEN REWORKED.
HINGES AT PRESS CHANNEL, ON LATERAL PARTS AND CAP HAVE BEEN RENEWED.
ALL HYDRAULIC HOSES OF CLAM SHELL CYLINDERS HAVE BEEN RENEWED.

INSPECTIONS IN RUSSIA, NEAR MOSCOW ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-poreba
machine name  lathe machine
manufacturer  poreba
model na
location  mumbai
year of manufacturing na
technical specification 
admit between center 4000mm 
swing over bed 900mm POREBA MACHINE NAME LATHE MACHINE MANUFACTURER POREBA MODEL NA LOCATION MUMBAI YEAR OF MANUFACTURING NA TECHNICAL SPECIFICATION ADMIT BETWEEN CENTER 4000MM SWING OVER BED 900MM
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Ubicación: Land-technical data sorting line<br/>manufacturer  ludden & mennekes entsorgungs-systeme gmbh<br/>typ paper/cardbord sorting line<br/>year of construction 2002<br/>throughput capacity 3 up to 6 tons/hour<br/><br/>pos. 01 feed chain belt conveyor, underfloor<br/>manufacturer ludden & mennekes<br/>type kgf 1400  <br/>feeding belt approx. 5,000 mm<br/>ascending conveyor approx. 13,500 mm<br/>belt width 1,400 mm<br/>effective width 1,330 mm<br/>side wall height 800 mm<br/>gradient 30° <br/>pit dimensions 11,950 x 2,100 x 1,500 mm (l x w x d)<br/><br/>pos. 03 dosing reel, <br/>mounting above the ascending conveyor pos. 02<br/>counter-rotating dosing reel including support and sidewall increase<br/>pipe diameter 700 mm<br/>drivers 150 x 15 mm<br/>drive power 4 kw<br/><br/>pos. 04 disc sieve coarse, <br/>material flow from infeed belt pos. 01 to discharge belt oversized grain pos. 05<br/>15 axles with elliptical plastic discs in various sizes<br/>sieve length 4,877 mm<br/>wire width 1,360 mm<br/>side panel height 750 mm<br/>sieving capacity 7 to 10 t/hour<br/>drive power 4 kw<br/>speed 67 rpm, infinitely variable by frequency converter<br/>gradient 16°<br/><br/>pos. 05 sliding belt conveyor, discharge belt oversized grain (cardboard) from disc screen pos. 04 on stockpile<br/>manufacturer ludden & mennekes<br/>type ggf 1400  <br/>centre distance 4,500 mm<br/>overall width 1,514 mm<br/>belt width 1,400 mm<br/>effective width 1,330 mm<br/>side wall height 500 mm<br/>gradient 0°<br/><br/>pos. 06 sliding belt conveyor ascending belt from disc screen pos. 04 to disc screen fine pos. 08<br/>manufacturer ludden & mennekes<br/>type ggf 1400  <br/>centre distance 9,700 mm<br/>overall width 1,514 mm<br/>belt width 1,400 mm<br/>effective width 1,330 mm<br/>gradient 20°<br/><br/>pos. 08 disc sieve fine <br/>12 axles with elliptical plastic discs in various sizes<br/>gradient 16°<br/><br/>pos. 09 discharge belt undersize grain (paper), sliding belt conveyor from disc screen pos. 08 on stockpile<br/>manufacturer ludden & mennekes<br/>type ggf 1400  <br/>centre distance 4.500 mm<br/>width 1.330 mm<br/>effective width 1,200 mm<br/><br/>pos. 10 sorting belt from discharge belt pos. 09<br/>manufacturer avermann <br/>type ggf 1400  <br/>centre distance 16,350 mm<br/>effective width 1,200 mm<br/>conveying speed 6 - 24 m/min.<br/>distance between idler rollers 500 mm<br/><br/>pos. 11 belt overflow from sorting belt<br/>manufacturer avermann <br/>type ggf 1000  <br/>centre distance 4.000 mm<br/>effective width 1.000 mm<br/>conveying speed 24 m/min.<br/><br/>comments:<br/>the plant is currently still built, but is no longer in operation. an inspection is possible by appointment. <br/><br/>dismantling and loading is the responsibility of the buyer. we will not assume liability for the given technical data and possible errors. TECHNICAL DATA SORTING LINE
MANUFACTURER LUDDEN & MENNEKES ENTSORGUNGS-SYSTEME GMBH
TYP PAPER/CARDBORD SORTING LINE
YEAR OF CONSTRUCTION 2002
THROUGHPUT CAPACITY 3 UP TO 6 TONS/HOUR

POS. 01 FEED CHAIN BELT CONVEYOR, UNDERFLOOR
MANUFACTURER LUDDEN & MENNEKES
TYPE KGF 1400
FEEDING BELT APPROX. 5,000 MM
ASCENDING CONVEYOR APPROX. 13,500 MM
BELT WIDTH 1,400 MM
EFFECTIVE WIDTH 1,330 MM
SIDE WALL HEIGHT 800 MM
GRADIENT 30°
PIT DIMENSIONS 11,950 X 2,100 X 1,500 MM (L X W X D)

POS. 03 DOSING REEL,
MOUNTING ABOVE THE ASCENDING CONVEYOR POS. 02
COUNTER-ROTATING DOSING REEL INCLUDING SUPPORT AND SIDEWALL INCREASE
PIPE DIAMETER 700 MM
DRIVERS 150 X 15 MM
DRIVE POWER 4 KW

POS. 04 DISC SIEVE COARSE,
MATERIAL FLOW FROM INFEED BELT POS. 01 TO DISCHARGE BELT OVERSIZED GRAIN POS. 05
15 AXLES WITH ELLIPTICAL PLASTIC DISCS IN VARIOUS SIZES
SIEVE LENGTH 4,877 MM
WIRE WIDTH 1,360 MM
SIDE PANEL HEIGHT 750 MM
SIEVING CAPACITY 7 TO 10 T/HOUR
DRIVE POWER 4 KW
SPEED 67 RPM, INFINITELY VARIABLE BY FREQUENCY CONVERTER
GRADIENT 16°

POS. 05 SLIDING BELT CONVEYOR, DISCHARGE BELT OVERSIZED GRAIN (CARDBOARD) FROM DISC SCREEN POS. 04 ON STOCKPILE
MANUFACTURER LUDDEN & MENNEKES
TYPE GGF 1400
CENTRE DISTANCE 4,500 MM
OVERALL WIDTH 1,514 MM
BELT WIDTH 1,400 MM
EFFECTIVE WIDTH 1,330 MM
SIDE WALL HEIGHT 500 MM
GRADIENT 0°

POS. 06 SLIDING BELT CONVEYOR ASCENDING BELT FROM DISC SCREEN POS. 04 TO DISC SCREEN FINE POS. 08
MANUFACTURER LUDDEN & MENNEKES
TYPE GGF 1400
CENTRE DISTANCE 9,700 MM
OVERALL WIDTH 1,514 MM
BELT WIDTH 1,400 MM
EFFECTIVE WIDTH 1,330 MM
GRADIENT 20°

POS. 08 DISC SIEVE FINE
12 AXLES WITH ELLIPTICAL PLASTIC DISCS IN VARIOUS SIZES
GRADIENT 16°

POS. 09 DISCHARGE BELT UNDERSIZE GRAIN (PAPER), SLIDING BELT CONVEYOR FROM DISC SCREEN POS. 08 ON STOCKPILE
MANUFACTURER LUDDEN & MENNEKES
TYPE GGF 1400
CENTRE DISTANCE 4.500 MM
WIDTH 1.330 MM
EFFECTIVE WIDTH 1,200 MM

POS. 10 SORTING BELT FROM DISCHARGE BELT POS. 09
MANUFACTURER AVERMANN
TYPE GGF 1400
CENTRE DISTANCE 16,350 MM
EFFECTIVE WIDTH 1,200 MM
CONVEYING SPEED 6 - 24 M/MIN.
DISTANCE BETWEEN IDLER ROLLERS 500 MM

POS. 11 BELT OVERFLOW FROM SORTING BELT
MANUFACTURER AVERMANN
TYPE GGF 1000
CENTRE DISTANCE 4.000 MM
EFFECTIVE WIDTH 1.000 MM
CONVEYING SPEED 24 M/MIN.

COMMENTS:
THE PLANT IS CURRENTLY STILL BUILT, BUT IS NO LONGER IN OPERATION. AN INSPECTION IS POSSIBLE BY APPOINTMENT.

DISMANTLING AND LOADING IS THE RESPONSIBILITY OF THE BUYER. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-offer this press (stamping press) to be seen here!

control cabinet is separated from the machine (unprofessional severed cable)
ask for still photos on request!

the press is ca from bj 2012 tel 0176 27 44 64 14 offer requested! OFFER THIS PRESS (STAMPING PRESS) TO BE SEEN HERE! CONTROL CABINET IS SEPARATED FROM THE MACHINE (UNPROFESSIONAL SEVERED CABLE) ASK FOR STILL PHOTOS ON REQUEST! THE PRESS IS CA FROM BJ 2012 TEL 0176 27 44 64 14 OFFER REQUESTED!
Vendedor: Herr Venjacob
Año de construcción: usado
Ubicación: Land-manufacturer lyndex<br/>typ  bimax 12/110<br/>year of construction 2006<br/>hours of operation 20,661 h, stand jun <br/>quantity of pressed bales 31,632 piece, stand jun<br/>press power main press 120 tons<br/>specific press capacity 10 kg/cm²<br/>press power free stamper 24 tons<br/>feed channel 2,000/1,400 x 1,040 mm<br/>bale size 1,100 x 1,100 mm, length variable<br/>driving motor 3 x 45 kw<br/>rated current 260 a<br/>tying system 5 fold vertical, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 up tp 30 kg/cbm approx. 10 up to 12 tons/h<br/>bulk weight of 50 up to 60 kg/cbm  approx. 18 up to 26 tons/h<br/>bulk weight of 70 up to 100 kg/cbm  approx. 28 up to 40 tons/h<br/>throughput rate with ruffler  approx. 10 up to 12 tons/h<br/>bale weight 650 up to 950 kg, depends on material and bale lenght<br/>volume hydraulic oil tank 3,100 l<br/>sps controller (manuf., type) siemens s7 300<br/>operating panel (manuf., type)  siemens simatic multi panel<br/>transport dimensions only baler 11,800 x 2,400 x 3,550 mm<br/>machine weight baler approx. 35 tons<br/>accessories ruffler, 15 kw<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER LYNDEX
TYP BIMAX 12/110
YEAR OF CONSTRUCTION 2006
HOURS OF OPERATION 20,661 H, STAND JUN
QUANTITY OF PRESSED BALES 31,632 PIECE, STAND JUN
PRESS POWER MAIN PRESS 120 TONS
SPECIFIC PRESS CAPACITY 10 KG/CM²
PRESS POWER FREE STAMPER 24 TONS
FEED CHANNEL 2,000/1,400 X 1,040 MM
BALE SIZE 1,100 X 1,100 MM, LENGTH VARIABLE
DRIVING MOTOR 3 X 45 KW
RATED CURRENT 260 A
TYING SYSTEM 5 FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 UP TP 30 KG/CBM APPROX. 10 UP TO 12 TONS/H
BULK WEIGHT OF 50 UP TO 60 KG/CBM APPROX. 18 UP TO 26 TONS/H
BULK WEIGHT OF 70 UP TO 100 KG/CBM APPROX. 28 UP TO 40 TONS/H
THROUGHPUT RATE WITH RUFFLER APPROX. 10 UP TO 12 TONS/H
BALE WEIGHT 650 UP TO 950 KG, DEPENDS ON MATERIAL AND BALE LENGHT
VOLUME HYDRAULIC OIL TANK 3,100 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC MULTI PANEL
TRANSPORT DIMENSIONS ONLY BALER 11,800 X 2,400 X 3,550 MM
MACHINE WEIGHT BALER APPROX. 35 TONS
ACCESSORIES RUFFLER, 15 KW

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-spindle moulder with swinging spindle gomad dfdk - 5
manufacturer gomad
model / machine type dfdk - 5
year of production 1997
category of machines. spindle moulder with tilting spindle
location

gorzów wlkp.
conditions of delivery

own collection
cost of delivery

customer cover
start type

to be agreed
description
comments

the milling body houses two spindles in its interior. the spindles made of alloy steel are mounted in bearings in a special version enabling operation at high speeds. each spindle is mounted in a cylindrical housing, which, together with the motor, is moved vertically. a cast-iron table with two rotating discs is attached to the upper part of the body. a cutter guard with guides and sawdust extraction is mounted on each disc, which can be moved and rotated by 360 °. parameter values ??units
spindle revolutions 3000, 4500, 6000, 9000 rpm.
vertical spindle travel 90 mm / min.
spindle spacing 760 mm
spindle seat morse taper no. 5 -
engine 2x4,5 / 5.9 kw
height from the table plane 850 mm
weight 850 kg
special equipment: - -
milling cutters short after 2 sets 25, 30 mm
device for plug-in fn-25 1 set. - -
arm bracket 1 set - -
angle guide 1 set - -
milling mandrel, long 1 set 25 mm
milling mandrel, long 12 sets 30 mm SPINDLE MOULDER WITH SWINGING SPINDLE GOMAD DFDK - 5 MANUFACTURER GOMAD MODEL / MACHINE TYPE DFDK - 5 YEAR OF PRODUCTION 1997 CATEGORY OF MACHINES. SPINDLE MOULDER WITH TILTING SPINDLE LOCATION GORZóW WLKP. CONDITIONS OF DELIVERY OWN COLLECTION COST OF DELIVERY CUSTOMER COVER START TYPE TO BE AGREED DESCRIPTION COMMENTS THE MILLING BODY HOUSES TWO SPINDLES IN ITS INTERIOR. THE SPINDLES MADE OF ALLOY STEEL ARE MOUNTED IN BEARINGS IN A SPECIAL VERSION ENABLING OPERATION AT HIGH SPEEDS. EACH SPINDLE IS MOUNTED IN A CYLINDRICAL HOUSING, WHICH, TOGETHER WITH THE MOTOR, IS MOVED VERTICALLY. A CAST-IRON TABLE WITH TWO ROTATING DISCS IS ATTACHED TO THE UPPER PART OF THE BODY. A CUTTER GUARD WITH GUIDES AND SAWDUST EXTRACTION IS MOUNTED ON EACH DISC, WHICH CAN BE MOVED AND ROTATED BY 360 °. PARAMETER VALUES ??UNITS SPINDLE REVOLUTIONS 3000, 4500, 6000, 9000 RPM. VERTICAL SPINDLE TRAVEL 90 MM / MIN. SPINDLE SPACING 760 MM SPINDLE SEAT MORSE TAPER NO. 5 - ENGINE 2X4,5 / 5.9 KW HEIGHT FROM THE TABLE PLANE 850 MM WEIGHT 850 KG SPECIAL EQUIPMENT: - - MILLING CUTTERS SHORT AFTER 2 SETS 25, 30 MM DEVICE FOR PLUG-IN FN-25 1 SET. - - ARM BRACKET 1 SET - - ANGLE GUIDE 1 SET - - MILLING MANDREL, LONG 1 SET 25 MM MILLING MANDREL, LONG 12 SETS 30 MM
Vendedor: PPHU Lignum Przemysław Kretowicz
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>typ hbc 100 k<br/>year of construction 2000<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm<br/>capacity per cycle time 3,15 m³<br/>theoretic cycle time 19 sec.<br/>bale size 1,100 x 720 mm<br/>driving motor 75 kw<br/>tying system 5 fold vertical, 3 fold horizontal, fully automated<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx.. 16 tons/h<br/>bulk weight of 50 kg/cbm  approx.. 25 tons/h<br/>bulk weight of 100 kg/cbm  approx.. 47 tons/h<br/>bale weight 550 up to 880 kg, depends on material and bale lenght<br/>sps controller (manuf., type)  telemecanique tsx micro<br/>operating panel (manuf., type)  schneider magelis touch<br/>baler dimensions built up with hopper 11,750 x 2,250 x 6,690 mm (l x w x h)<br/>transport dimensions only baler 11.750 x 2.250 x 3.150 mm (l x w x h)<br/>machine weight baler approx. 35 tons<br/><br/>comments:<br/>inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYP HBC 100 K
YEAR OF CONSTRUCTION 2000
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM
CAPACITY PER CYCLE TIME 3,15 M³
THEORETIC CYCLE TIME 19 SEC.
BALE SIZE 1,100 X 720 MM
DRIVING MOTOR 75 KW
TYING SYSTEM 5 FOLD VERTICAL, 3 FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX.. 16 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX.. 25 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX.. 47 TONS/H
BALE WEIGHT 550 UP TO 880 KG, DEPENDS ON MATERIAL AND BALE LENGHT
SPS CONTROLLER (MANUF., TYPE) TELEMECANIQUE TSX MICRO
OPERATING PANEL (MANUF., TYPE) SCHNEIDER MAGELIS TOUCH
BALER DIMENSIONS BUILT UP WITH HOPPER 11,750 X 2,250 X 6,690 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 11.750 X 2.250 X 3.150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 35 TONS

COMMENTS:
INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-screw compressor, compressor hydrovane 33
manufacturer hydrovane
model / machine type 33
year of production 1997
category of machines screw compressor, compressor
location

gorzów wlkp.
conditions of delivery

own collection
cost of delivery

customer cover
start type

to be agreed
description
comments

vane blade compressor 152 kg motor 5.5 kw, dimensions 1160 x 500x700, pressure 7.5 bar, rotation on the engine speed 1440 l / min SCREW COMPRESSOR, COMPRESSOR HYDROVANE 33 MANUFACTURER HYDROVANE MODEL / MACHINE TYPE 33 YEAR OF PRODUCTION 1997 CATEGORY OF MACHINES SCREW COMPRESSOR, COMPRESSOR LOCATION GORZóW WLKP. CONDITIONS OF DELIVERY OWN COLLECTION COST OF DELIVERY CUSTOMER COVER START TYPE TO BE AGREED DESCRIPTION COMMENTS VANE BLADE COMPRESSOR 152 KG MOTOR 5.5 KW, DIMENSIONS 1160 X 500X700, PRESSURE 7.5 BAR, ROTATION ON THE ENGINE SPEED 1440 L / MIN
Vendedor: PPHU Lignum Przemysław Kretowicz
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer hsm<br/>typ vk 4812 p<br/>year of construction 2014<br/>hours of operation 6,518 hours<br/>press power main press 48 tons<br/>specific press capacity 58,2 n/cm²<br/>feed channel 1,250 x 1,020 mm<br/>theoretic cycle time 24,5 sec.<br/>theoretic  throughput rate 151 m³/hour<br/>bale size 1,100 x 750 x 600 up to 1,200mm<br/>driving motor 15 kw<br/>connected load 17 kw<br/>rated current 36 a<br/>tying system 4-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 3 tons/hour<br/>bulk weight of 50 kg/cbm up to 7,5 tons/hour<br/>bale weight up to 550 kg, depends on material<br/>sps controller (manuf., type) siemens<br/>operating panel (manuf., type) siemens hmi touch panel<br/>filling quantity hydraulic oil tank 300 l<br/>oil type hvi 46<br/>transport dimensions 8,500 x 2,500 x 2,700 mm (l x w x h)<br/>machine weight baler approx. 10 tons<br/><br/>equipment/accessories :<br/>funnel, two mobile wire coil stands for 40 kg wire rolls, bale slider. to pre-compact and hold down voluminous materials such as loose cartons or foil, the machine is equipped with a small pre-compression flap, holding-down device.<br/><br/>condition of the baler:<br/>with only 6,518 operating hours, the press is in very good condition, immediately available and ready for operation.<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER HSM
TYP VK 4812 P
YEAR OF CONSTRUCTION 2014
HOURS OF OPERATION 6,518 HOURS
PRESS POWER MAIN PRESS 48 TONS
SPECIFIC PRESS CAPACITY 58,2 N/CM²
FEED CHANNEL 1,250 X 1,020 MM
THEORETIC CYCLE TIME 24,5 SEC.
THEORETIC THROUGHPUT RATE 151 M³/HOUR
BALE SIZE 1,100 X 750 X 600 UP TO 1,200MM
DRIVING MOTOR 15 KW
CONNECTED LOAD 17 KW
RATED CURRENT 36 A
TYING SYSTEM 4-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 3 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM UP TO 7,5 TONS/HOUR
BALE WEIGHT UP TO 550 KG, DEPENDS ON MATERIAL
SPS CONTROLLER (MANUF., TYPE) SIEMENS
OPERATING PANEL (MANUF., TYPE) SIEMENS HMI TOUCH PANEL
FILLING QUANTITY HYDRAULIC OIL TANK 300 L
OIL TYPE HVI 46
TRANSPORT DIMENSIONS 8,500 X 2,500 X 2,700 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 10 TONS

EQUIPMENT/ACCESSORIES :
FUNNEL, TWO MOBILE WIRE COIL STANDS FOR 40 KG WIRE ROLLS, BALE SLIDER. TO PRE-COMPACT AND HOLD DOWN VOLUMINOUS MATERIALS SUCH AS LOOSE CARTONS OR FOIL, THE MACHINE IS EQUIPPED WITH A SMALL PRE-COMPRESSION FLAP, HOLDING-DOWN DEVICE.

CONDITION OF THE BALER:
WITH ONLY 6,518 OPERATING HOURS, THE PRESS IS IN VERY GOOD CONDITION, IMMEDIATELY AVAILABLE AND READY FOR OPERATION.

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-
gluing machine hall la 1500

used, functional
machine wheels
2 rubber-lined rollers 1500 mm length
rubber flooring in very good condition
clearance height 100 mm
drive approx. 1 kwt
electric cable with plug

transport dimensions: 2000x90xx1600 mm, 350 kg

delivery: from stock offering is aimed only at trader
heavy equipment and machinery and equipment are sold without warranty.
technical data, year of manufacture and condition no warranty! bought as seen!
subject to prior sale
terms of delivery: from site
the owl maschinenhandel gmbh general terms and conditions apply, see on our homepage  GLUING MACHINE HALL LA 1500 USED, FUNCTIONAL MACHINE WHEELS 2 RUBBER-LINED ROLLERS 1500 MM LENGTH RUBBER FLOORING IN VERY GOOD CONDITION CLEARANCE HEIGHT 100 MM DRIVE APPROX. 1 KWT ELECTRIC CABLE WITH PLUG TRANSPORT DIMENSIONS: 2000X90XX1600 MM, 350 KG DELIVERY: FROM STOCK OFFERING IS AIMED ONLY AT TRADER HEAVY EQUIPMENT AND MACHINERY AND EQUIPMENT ARE SOLD WITHOUT WARRANTY. TECHNICAL DATA, YEAR OF MANUFACTURE AND CONDITION NO WARRANTY! BOUGHT AS SEEN! SUBJECT TO PRIOR SALE TERMS OF DELIVERY: FROM SITE THE OWL MASCHINENHANDEL GMBH GENERAL TERMS AND CONDITIONS APPLY, SEE ON OUR HOMEPAGE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer paal<br/>typ konti 600 d<br/>year of construction 2001<br/>hours of operation 26,784 hours, stand january 2019<br/>press power main press 145 tons<br/>feed channel 2,000 x 1,020 mm<br/>filling volume 3,45 m³<br/>theoretic  throughput rate 1,070 m³/h<br/>throughput rate under operating conditions 540 m³/h<br/>bale size 1,100 x 1,080 mm, length variable<br/>driving motor 3 x 45 kw<br/>ruffler 15 kw<br/>connected load 185 kw<br/>rated current 340 a<br/>tying system 5 fold vertical, full automatic<br/>throughput rate at a<br/>bulk weight of 35 kg/cbm approx. 17 tons/h<br/>bulk weight of 60 kg/cbm approx. 30 tons/h<br/>bulk weight of 100 kg/cbm approx. 47 tons/h<br/>bale weight 800 up to 1,250 kg, depends on bale length and material<br/>volume hydraulic oil 3,100 l<br/>transport dimensions only baler 14,365 x 2,600 x 3,640 mm (l x w x h)<br/>machine weight baler approx. 32 tons<br/><br/>technical data conveyor belt<br/>manufacturer   metaalwaren de schermer<br/>typ skb 1800<br/>year of construction 12/2002<br/>driving motor 7,5 kw<br/>belt speed 0,3 m/sec.<br/>length feeding conveyor 10,500 mm<br/>length elevating conveyor 8,000 mm<br/>effecting width 1,700 mm<br/>pit dimensions 14,000 x 2,500 x 1,510 mm (l x w x d)<br/>weight approx. 12,5 tons<br/><br/>comments:<br/>the press with conveyor belt is currently still in operation, the replacement with a new system is planned for the 2nd quarter of this year. <br/>the scope of delivery includes a conveyor belt (chain belt conveyor, manufacturer  metaalwaren de schermer, type skb 1800), 10 wire stations (without wire) and a bale slider.<br/>the documentation (manual, ce, electrical/hydraulic diagram) is available. an inspection is possible after arrangement. dismantling and loading is the responsibility of the buyer. we assume no liability for the technical data or any errors. TECHNICAL DATA BALER
MANUFACTURER PAAL
TYP KONTI 600 D
YEAR OF CONSTRUCTION 2001
HOURS OF OPERATION 26,784 HOURS, STAND JANUARY 2019
PRESS POWER MAIN PRESS 145 TONS
FEED CHANNEL 2,000 X 1,020 MM
FILLING VOLUME 3,45 M³
THEORETIC THROUGHPUT RATE 1,070 M³/H
THROUGHPUT RATE UNDER OPERATING CONDITIONS 540 M³/H
BALE SIZE 1,100 X 1,080 MM, LENGTH VARIABLE
DRIVING MOTOR 3 X 45 KW
RUFFLER 15 KW
CONNECTED LOAD 185 KW
RATED CURRENT 340 A
TYING SYSTEM 5 FOLD VERTICAL, FULL AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 35 KG/CBM APPROX. 17 TONS/H
BULK WEIGHT OF 60 KG/CBM APPROX. 30 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 47 TONS/H
BALE WEIGHT 800 UP TO 1,250 KG, DEPENDS ON BALE LENGTH AND MATERIAL
VOLUME HYDRAULIC OIL 3,100 L
TRANSPORT DIMENSIONS ONLY BALER 14,365 X 2,600 X 3,640 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 32 TONS

TECHNICAL DATA CONVEYOR BELT
MANUFACTURER METAALWAREN DE SCHERMER
TYP SKB 1800
YEAR OF CONSTRUCTION 12/2002
DRIVING MOTOR 7,5 KW
BELT SPEED 0,3 M/SEC.
LENGTH FEEDING CONVEYOR 10,500 MM
LENGTH ELEVATING CONVEYOR 8,000 MM
EFFECTING WIDTH 1,700 MM
PIT DIMENSIONS 14,000 X 2,500 X 1,510 MM (L X W X D)
WEIGHT APPROX. 12,5 TONS

COMMENTS:
THE PRESS WITH CONVEYOR BELT IS CURRENTLY STILL IN OPERATION, THE REPLACEMENT WITH A NEW SYSTEM IS PLANNED FOR THE 2ND QUARTER OF THIS YEAR.
THE SCOPE OF DELIVERY INCLUDES A CONVEYOR BELT (CHAIN BELT CONVEYOR, MANUFACTURER METAALWAREN DE SCHERMER, TYPE SKB 1800), 10 WIRE STATIONS (WITHOUT WIRE) AND A BALE SLIDER.
THE DOCUMENTATION (MANUAL, CE, ELECTRICAL/HYDRAULIC DIAGRAM) IS AVAILABLE. AN INSPECTION IS POSSIBLE AFTER ARRANGEMENT. DISMANTLING AND LOADING IS THE RESPONSIBILITY OF THE BUYER. WE ASSUME NO LIABILITY FOR THE TECHNICAL DATA OR ANY ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 5.000 €
Ubicación: Land-foil plastic paper shredder
large motor 380 v, 19 kw, 1470 r/min FOIL PLASTIC PAPER SHREDDER LARGE MOTOR 380 V, 19 KW, 1470 R/MIN
Vendedor: Machine-For-Sale.com
Año de construcción: usado
Ubicación: Land-manufacturer anis trend d.o.o.<br/>type ats110-75d 60 tons <br/>year of construction 2019<br/>hours of operation 52 hours<br/>press power main press 59 tons<br/>specific press capacity 71 n/cm²<br/>bale density with material cardboard approx.450 kg/m³<br/>bale density with material pet- and hdpe bottles approx. 280 up to 320 kg/m³<br/>feed hopper 1,600 x 1,040 mm<br/>capacity per cycle 2,13 m³<br/>theoretic cycle time 10,7 sec.<br/>cycle time under operating conditions approx. 20 sec.<br/>theoretic throughput rate 441 m³/hour<br/>throughput rate under operating conditions approx. 235 m³/hour  <br/>bale size 1,100 x 770 x 1,200 up to 2,200 mm (w x h x l)<br/>driving motor 45 kw<br/>oil cooler 1,5 kw<br/>oil heater 2,0 kw<br/>main electric power 400 v / 50 hz<br/>connected load 49 kw (without conveyor)<br/>total input current 96 a<br/>power supply fuses 3 x 125 a<br/>power supply wire size 4 x 50 mm²<br/>isolations class ip 55<br/>tying system 4- fold vertical, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx. 7 up to 8 tons/hour<br/>bulk weight of 50 kg/cbm approx. 10 up to 12 tons/hour<br/>bulk weight of 80 kg/cbm approx. 14 up to 16 tons/hour<br/>throughput rate with ruffler approx. 15 tons/hour<br/>bale weight 450 up to 750 kg, depends on material and bale length<br/>bale weight mixed cardboard approx. 580 kg<br/>bale weight mixed paper approx.  650<br/>bale weight pet- and hdpe bottles approx. 300 kg<br/>volume hydraulic oil tank 1,000 l<br/>hydraulic system working pressure 290 bar<br/>sps controller (manuf., type) siemens et 200 s<br/>operating panel (manuf., type) siemens ktp 700<br/>baler dimensions built up without hopper 9,755 x 2,227 x 3,229 mm (l x w x h)<br/>transport dimensions only baler 9,600 x 2,200 x 2,750 mm<br/>machine weight baler approx. 20 tons<br/><br/>special features of the machine:<br/>german plc, siemens, type et 200 s with touch panel, siemens, type kpt 700, internet modem for online service and system diagnosis can be retrofitted.<br/>german hydraulic pump from bucher hydraulics, internal gear qx, 5th generation, extremely robust and durable for over 30 years.<br/>german hydraulic valves from parker, available at short notice throughout europe. <br/>wear-resistant hardox 450 plates in the pressing chamber (base and side walls), as well as the press stemp is equipped with hardox 450 plates all around. <br/>service-friendly motor/pump unit, over 500 x 500 mm flange plate can be dismantled in one unit without disconnecting the motor from the pump. <br/>all knives, on the press stemp as well as the counter knives in the frame are segmented, can be interchanged and can be rotated by 180°, so they can be used twice.<br/><br/>service of the manufacturer and its partners in europe:<br/>all wearing parts and spare parts, also hydraulic pumps and cylinders are available in 12 up to max. 24 hours by courier service.<br/>service technicians are on site within 24 up to max. 48 hours within europe. MANUFACTURER ANIS TREND D.O.O.
TYPE ATS110-75D 60 TONS
YEAR OF CONSTRUCTION 2019
HOURS OF OPERATION 52 HOURS
PRESS POWER MAIN PRESS 59 TONS
SPECIFIC PRESS CAPACITY 71 N/CM²
BALE DENSITY WITH MATERIAL CARDBOARD APPROX.450 KG/M³
BALE DENSITY WITH MATERIAL PET- AND HDPE BOTTLES APPROX. 280 UP TO 320 KG/M³
FEED HOPPER 1,600 X 1,040 MM
CAPACITY PER CYCLE 2,13 M³
THEORETIC CYCLE TIME 10,7 SEC.
CYCLE TIME UNDER OPERATING CONDITIONS APPROX. 20 SEC.
THEORETIC THROUGHPUT RATE 441 M³/HOUR
THROUGHPUT RATE UNDER OPERATING CONDITIONS APPROX. 235 M³/HOUR
BALE SIZE 1,100 X 770 X 1,200 UP TO 2,200 MM (W X H X L)
DRIVING MOTOR 45 KW
OIL COOLER 1,5 KW
OIL HEATER 2,0 KW
MAIN ELECTRIC POWER 400 V / 50 HZ
CONNECTED LOAD 49 KW (WITHOUT CONVEYOR)
TOTAL INPUT CURRENT 96 A
POWER SUPPLY FUSES 3 X 125 A
POWER SUPPLY WIRE SIZE 4 X 50 MM²
ISOLATIONS CLASS IP 55
TYING SYSTEM 4- FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 7 UP TO 8 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM APPROX. 10 UP TO 12 TONS/HOUR
BULK WEIGHT OF 80 KG/CBM APPROX. 14 UP TO 16 TONS/HOUR
THROUGHPUT RATE WITH RUFFLER APPROX. 15 TONS/HOUR
BALE WEIGHT 450 UP TO 750 KG, DEPENDS ON MATERIAL AND BALE LENGTH
BALE WEIGHT MIXED CARDBOARD APPROX. 580 KG
BALE WEIGHT MIXED PAPER APPROX. 650
BALE WEIGHT PET- AND HDPE BOTTLES APPROX. 300 KG
VOLUME HYDRAULIC OIL TANK 1,000 L
HYDRAULIC SYSTEM WORKING PRESSURE 290 BAR
SPS CONTROLLER (MANUF., TYPE) SIEMENS ET 200 S
OPERATING PANEL (MANUF., TYPE) SIEMENS KTP 700
BALER DIMENSIONS BUILT UP WITHOUT HOPPER 9,755 X 2,227 X 3,229 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 9,600 X 2,200 X 2,750 MM
MACHINE WEIGHT BALER APPROX. 20 TONS

SPECIAL FEATURES OF THE MACHINE:
GERMAN PLC, SIEMENS, TYPE ET 200 S WITH TOUCH PANEL, SIEMENS, TYPE KPT 700, INTERNET MODEM FOR ONLINE SERVICE AND SYSTEM DIAGNOSIS CAN BE RETROFITTED.
GERMAN HYDRAULIC PUMP FROM BUCHER HYDRAULICS, INTERNAL GEAR QX, 5TH GENERATION, EXTREMELY ROBUST AND DURABLE FOR OVER 30 YEARS.
GERMAN HYDRAULIC VALVES FROM PARKER, AVAILABLE AT SHORT NOTICE THROUGHOUT EUROPE.
WEAR-RESISTANT HARDOX 450 PLATES IN THE PRESSING CHAMBER (BASE AND SIDE WALLS), AS WELL AS THE PRESS STEMP IS EQUIPPED WITH HARDOX 450 PLATES ALL AROUND.
SERVICE-FRIENDLY MOTOR/PUMP UNIT, OVER 500 X 500 MM FLANGE PLATE CAN BE DISMANTLED IN ONE UNIT WITHOUT DISCONNECTING THE MOTOR FROM THE PUMP.
ALL KNIVES, ON THE PRESS STEMP AS WELL AS THE COUNTER KNIVES IN THE FRAME ARE SEGMENTED, CAN BE INTERCHANGED AND CAN BE ROTATED BY 180°, SO THEY CAN BE USED TWICE.

SERVICE OF THE MANUFACTURER AND ITS PARTNERS IN EUROPE:
ALL WEARING PARTS AND SPARE PARTS, ALSO HYDRAULIC PUMPS AND CYLINDERS ARE AVAILABLE IN 12 UP TO MAX. 24 HOURS BY COURIER SERVICE.
SERVICE TECHNICIANS ARE ON SITE WITHIN 24 UP TO MAX. 48 HOURS WITHIN EUROPE.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 1.980 €
Ubicación: Land-omera

edge banding machine specifications:

omera r3 / 7-3

mounted on t - slot table (1300 x 1000 mm)

two-hand operating voltage 380 v weight 2000 kg

the motor of the machine has been electrically tested and works fine.

other functions of the machine could not be tested. 


an invoice is created for you.

the vat id according to ⧠25a vat act does not apply.
 OMERA EDGE BANDING MACHINE SPECIFICATIONS: OMERA R3 / 7-3 MOUNTED ON T - SLOT TABLE (1300 X 1000 MM) TWO-HAND OPERATING VOLTAGE 380 V WEIGHT 2000 KG THE MOTOR OF THE MACHINE HAS BEEN ELECTRICALLY TESTED AND WORKS FINE. OTHER FUNCTIONS OF THE MACHINE COULD NOT BE TESTED. AN INVOICE IS CREATED FOR YOU. THE VAT ID ACCORDING TO &ACIRC;&SECT; 25A VAT ACT DOES NOT APPLY.
Vendedor: Fa. Schönknecht
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer paal<br/>typ konti 275 e/k<br/>year of construction 2007<br/>hours of operation approx. 8,000 hours<br/>press power main press 80 tons at 300 bar<br/>specific press capacity 9,7 kg/cm²<br/>feed channel 1,600 x 1.020 mm (l x w)<br/>throughput capacity under operating conditions 350 m³/hour<br/>bale size 750 x 1,100 mm, length variable<br/>driving motor 75 kw<br/>connected load 99 kw<br/>rated current 180 a<br/>tying system 4-fold vertical, 3-fold horizontal, fully automatic<br/>bale weight up to 750 kg, depends on material<br/>volume hydraulic oil tank 2,100 l<br/>sps controller (manuf., type) siemens simatic s7-300<br/>operating panel (manuf., type) siemens multi panel<br/>transport dimensions only baler 11,152 x 2,152 x 3,000 mm (l x w x h)<br/>machine weight baler approx. 21 tons<br/><br/>condition of the baler:<br/>the press is currently in operation until the 17th calendar week and will then be replaced by a new press. with only approx. 8.000 operating hours the machine is in a really good condition and ready for immediate use.<br/><br/>scope of delivery:<br/>baling press, wire drawing stations (without wire), bale chute and machine documentation. the conveyor belt is not for sale and is therefore not included in the scope of delivery.<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available. dismantling and loading is the responsibility of the buyer. inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER PAAL
TYP KONTI 275 E/K
YEAR OF CONSTRUCTION 2007
HOURS OF OPERATION APPROX. 8,000 HOURS
PRESS POWER MAIN PRESS 80 TONS AT 300 BAR
SPECIFIC PRESS CAPACITY 9,7 KG/CM²
FEED CHANNEL 1,600 X 1.020 MM (L X W)
THROUGHPUT CAPACITY UNDER OPERATING CONDITIONS 350 M³/HOUR
BALE SIZE 750 X 1,100 MM, LENGTH VARIABLE
DRIVING MOTOR 75 KW
CONNECTED LOAD 99 KW
RATED CURRENT 180 A
TYING SYSTEM 4-FOLD VERTICAL, 3-FOLD HORIZONTAL, FULLY AUTOMATIC
BALE WEIGHT UP TO 750 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 2,100 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS SIMATIC S7-300
OPERATING PANEL (MANUF., TYPE) SIEMENS MULTI PANEL
TRANSPORT DIMENSIONS ONLY BALER 11,152 X 2,152 X 3,000 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 21 TONS

CONDITION OF THE BALER:
THE PRESS IS CURRENTLY IN OPERATION UNTIL THE 17TH CALENDAR WEEK AND WILL THEN BE REPLACED BY A NEW PRESS. WITH ONLY APPROX. 8.000 OPERATING HOURS THE MACHINE IS IN A REALLY GOOD CONDITION AND READY FOR IMMEDIATE USE.

SCOPE OF DELIVERY:
BALING PRESS, WIRE DRAWING STATIONS (WITHOUT WIRE), BALE CHUTE AND MACHINE DOCUMENTATION. THE CONVEYOR BELT IS NOT FOR SALE AND IS THEREFORE NOT INCLUDED IN THE SCOPE OF DELIVERY.

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. DISMANTLING AND LOADING IS THE RESPONSIBILITY OF THE BUYER. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more POR types: