49 ofertas

Año de construcción: usado
Ubicación: Land-cnc lathe with bar loader
sma-ref-5882
category: cnc lathes
manufacturer: saeilo
type: contur lt-400 mc
year of construction: 2011
control: fanuc 0i-td
spindle: 11/15 kw
transmission rate: 74 mm
workspace:
turning diameter: 400 mm
turning length: 800 mm
c-axis
special features:
angetr. tools (vdi 40)
bar loader multi 3000 lr 1640/80
condition:
ready for use
under current
spindle hours 4.700 h
location: thuringia
availability: summer 2019 CNC LATHE WITH BAR LOADER SMA-REF-5882 CATEGORY: CNC LATHES MANUFACTURER: SAEILO TYPE: CONTUR LT-400 MC YEAR OF CONSTRUCTION: 2011 CONTROL: FANUC 0I-TD SPINDLE: 11/15 KW TRANSMISSION RATE: 74 MM WORKSPACE: TURNING DIAMETER: 400 MM TURNING LENGTH: 800 MM C-AXIS SPECIAL FEATURES: ANGETR. TOOLS (VDI 40) BAR LOADER MULTI 3000 LR 1640/80 CONDITION: READY FOR USE UNDER CURRENT SPINDLE HOURS 4.700 H LOCATION: THURINGIA AVAILABILITY: SUMMER 2019
Vendedor: S-MA GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 270 €
Ubicación: Land-weight approx.: 20 kg<br/>dimensions (l x w x h) approx.: 800 x 500 x 600 mm<br/>description: diesel WEIGHT APPROX.: 20 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 500 X 600 MM
DESCRIPTION: DIESEL
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-160 / 173 kw, chiller / heat pump air-cooled, climaveneta, type nx nk0604t
m.t.a. s.p.a..

the climaveneta type nx nk0604t is a reversible heat pump, which is suitable for outdoor installation (from-5 °c to + 46 °c), with steel evaporator, four scroll compressors, pump, anti-uvdisplay protection, 10 mm of insulation and control panel 4-20 ma,   auxiliary signal w3000se

cooling capacity (kw): 160
coldwatertemp. exit / entry (°c): 7 / 12
flow rate (l / s): 7,655
ambient temperature (°c): 35
heating power kw 173.5
coldwatertemp. exit / entry (°c): 45 / 40
flow rate (l / s): 8,375
available pump pressure...
ambient temperature °c 7

refrigerant circuit:
refrigerant r 410a
circuits (number): 2
compressor (number): 4
performance level (%): 0-25-50-75-100

electrical data:
voltage v 400, frequency hz 50, stages of ph 3.
maximum power consumption (kw): 80
max current (a): 139,33
protection class: ip54

dimensions:
length (mm): 3110 mm width 2220, height 2150 mm
weight (kg): 1640
connection dn 125

climaveneta type nx-nk0604t
serial no.: 32082784
built in 2017, state: optical 2, technically ok (used)

price: on request in euro (excl. vat from nettetal), 3 months warranty

used machines can have visual defects due to their use.
(subject to change and prior sale reserved!)
location: mta germany gmbh, 41334 nettetal
  160 / 173 KW, CHILLER / HEAT PUMP AIR-COOLED, CLIMAVENETA, TYPE NX NK0604T M.T.A. S.P.A.. THE CLIMAVENETA TYPE NX NK0604T IS A REVERSIBLE HEAT PUMP, WHICH IS SUITABLE FOR OUTDOOR INSTALLATION (FROM-5 °C TO + 46 °C), WITH STEEL EVAPORATOR, FOUR SCROLL COMPRESSORS, PUMP, ANTI-UVDISPLAY PROTECTION, 10 MM OF INSULATION AND CONTROL PANEL 4-20 MA, AUXILIARY SIGNAL W3000SE COOLING CAPACITY (KW): 160 COLDWATERTEMP. EXIT / ENTRY (°C): 7 / 12 FLOW RATE (L / S): 7,655 AMBIENT TEMPERATURE (°C): 35 HEATING POWER KW 173.5 COLDWATERTEMP. EXIT / ENTRY (°C): 45 / 40 FLOW RATE (L / S): 8,375 AVAILABLE PUMP PRESSURE... AMBIENT TEMPERATURE °C 7 REFRIGERANT CIRCUIT: REFRIGERANT R 410A CIRCUITS (NUMBER): 2 COMPRESSOR (NUMBER): 4 PERFORMANCE LEVEL (%): 0-25-50-75-100 ELECTRICAL DATA: VOLTAGE V 400, FREQUENCY HZ 50, STAGES OF PH 3. MAXIMUM POWER CONSUMPTION (KW): 80 MAX CURRENT (A): 139,33 PROTECTION CLASS: IP54 DIMENSIONS: LENGTH (MM): 3110 MM WIDTH 2220, HEIGHT 2150 MM WEIGHT (KG): 1640 CONNECTION DN 125 CLIMAVENETA TYPE NX-NK0604T SERIAL NO.: 32082784 BUILT IN 2017, STATE: OPTICAL 2, TECHNICALLY OK (USED) PRICE: ON REQUEST IN EURO (EXCL. VAT FROM NETTETAL), 3 MONTHS WARRANTY USED MACHINES CAN HAVE VISUAL DEFECTS DUE TO THEIR USE. (SUBJECT TO CHANGE AND PRIOR SALE RESERVED!) LOCATION: MTA GERMANY GMBH, 41334 NETTETAL
Vendedor: MTA Deutschland GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 80 kg<br/>dimensions (l x w x h) approx.: 1650 x 700 x 950 mm<br/>description: ? portable hot air generator<br> ? reference notario-43<br> ? serial number 151203877<br> ? voltage 230 v<br> ? thermic power 75 kw - 65000 kcal/h<br> ? consumption 6.35 kg/h<br> ? air capacity 3000 m³/h<br> ? diesel fuel WEIGHT APPROX.: 80 KG
DIMENSIONS (L X W X H) APPROX.: 1650 X 700 X 950 MM
DESCRIPTION: ? PORTABLE HOT AIR GENERATOR
? REFERENCE NOTARIO-43
? SERIAL NUMBER 151203877
? VOLTAGE 230 V
? THERMIC POWER 75 KW - 65000 KCAL/H
? CONSUMPTION 6.35 KG/H
? AIR CAPACITY 3000 M³/H
? DIESEL FUEL
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-stock # 1228

wittmann robot w633-436
built in 2001
art. no. r800005910, type s50fi-v71-2/80
lol 188116407

x = 900,.
y = 1,400.
z = 3,500;

weight: 530 kg

STOCK # 1228 WITTMANN ROBOT W633-436 BUILT IN 2001 ART. NO. R800005910, TYPE S50FI-V71-2/80 LOL 188116407 X = 900,. Y = 1,400. Z = 3,500; WEIGHT: 530 KG
Vendedor: Pro-tech Kunststofftechnologie GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 80 kg<br/>dimensions (l x w x h) approx.: 1650 x 700 x 950 mm<br/>description: ? portable hot air generator<br> ? reference notario-32<br> ? serial number 151203873<br> ? voltage 230 v<br> ? thermic power 75 kw - 65000 kcal/h<br> ? consumption 6.35 kg/h<br> ? air capacity 3000 m³/h<br> ? diesel fuel WEIGHT APPROX.: 80 KG
DIMENSIONS (L X W X H) APPROX.: 1650 X 700 X 950 MM
DESCRIPTION: ? PORTABLE HOT AIR GENERATOR
? REFERENCE NOTARIO-32
? SERIAL NUMBER 151203873
? VOLTAGE 230 V
? THERMIC POWER 75 KW - 65000 KCAL/H
? CONSUMPTION 6.35 KG/H
? AIR CAPACITY 3000 M³/H
? DIESEL FUEL
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-machine weight 15,000 kg, sheet metal format max. 2,500 x 4,000 mm, laser power 2 x 6,000 w, laser type truflow 6000, serial no. d0009a1179, cooling unit, make klh, yom 2011, ser. ts00110946, equipment: 2 laser cutting heads, pallet changer, ser.-no. 40269s548, 2,500 x 4,000 mm, chip conveyor, loading system, make trumpf, type loadmaster, ser.-no. n0014a0216, control, make trump, elapsed operating hours resonator laser 2 15757, laser 1 16401, beam on (laser 2) 4341, laser on (laser 2) 15635, beam on (laser 1) 7508, laser on (laser 1) 16186
de:
cnc-laserschneidanlage, fabr. trumpf, typ trulaser 7040, bj. 2011, ser.-nr. a0320a0086, maschinengewicht 15.000 kg, blechformat max. 2.500 x 4.000 mm, laserleistung 2 x 6.000 w, lasertyp truflow 6000, ser.-nr. d0009a1179, kühlaggregat, fabr. klh, bj. 2011, ser.-nr. ts00110946, ausstattung: 2 laserschneidköpfe, palettenwechsler, ser.-nr. 40269s548, 2.500 x 4.000 mm, späneförderer, beladesystem, fabr. trumpf, typ loadmaster, ser.-nr. n0014a0216, steuer fabr. trumpf, abgel. betriebsstd. resonator laser 2 15757, laser 1 16401, strahl ein (laser 2) 4341, laser ein (laser 2) 15635, strahl ein (laser 1) 7508, laser ein (laser 1) 16186
  MACHINE WEIGHT 15,000 KG, SHEET METAL FORMAT MAX. 2,500 X 4,000 MM, LASER POWER 2 X 6,000 W, LASER TYPE TRUFLOW 6000, SERIAL NO. D0009A1179, COOLING UNIT, MAKE KLH, YOM 2011, SER. TS00110946, EQUIPMENT: 2 LASER CUTTING HEADS, PALLET CHANGER, SER.-NO. 40269S548, 2,500 X 4,000 MM, CHIP CONVEYOR, LOADING SYSTEM, MAKE TRUMPF, TYPE LOADMASTER, SER.-NO. N0014A0216, CONTROL, MAKE TRUMP, ELAPSED OPERATING HOURS RESONATOR LASER 2 15757, LASER 1 16401, BEAM ON (LASER 2) 4341, LASER ON (LASER 2) 15635, BEAM ON (LASER 1) 7508, LASER ON (LASER 1) 16186 DE: CNC-LASERSCHNEIDANLAGE, FABR. TRUMPF, TYP TRULASER 7040, BJ. 2011, SER.-NR. A0320A0086, MASCHINENGEWICHT 15.000 KG, BLECHFORMAT MAX. 2.500 X 4.000 MM, LASERLEISTUNG 2 X 6.000 W, LASERTYP TRUFLOW 6000, SER.-NR. D0009A1179, KüHLAGGREGAT, FABR. KLH, BJ. 2011, SER.-NR. TS00110946, AUSSTATTUNG: 2 LASERSCHNEIDKöPFE, PALETTENWECHSLER, SER.-NR. 40269S548, 2.500 X 4.000 MM, SPäNEFöRDERER, BELADESYSTEM, FABR. TRUMPF, TYP LOADMASTER, SER.-NR. N0014A0216, STEUER FABR. TRUMPF, ABGEL. BETRIEBSSTD. RESONATOR LASER 2 15757, LASER 1 16401, STRAHL EIN (LASER 2) 4341, LASER EIN (LASER 2) 15635, STRAHL EIN (LASER 1) 7508, LASER EIN (LASER 1) 16186
Vendedor: Hilco
Año de construcción: usado
Precio: used machinery auction RESALE 14.000 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 3900 x 2560 x 1640 mm<br/>description: ? cnc machining center<br> ? serial number 02-48<br> ? working area approx. 2500 x 650 mm<br> ? vertical milling head with motor 1.12 kw-max. 18000 rpm<br> ? 2 x cutting group: tilting up to 45°, blade saw diameter 300 mm, motor 3 kw-2780 rpm<br> ? 2 x drilling unit: inclined at 45°, 13 drills each, motor 1.50 kw-2750 rpm<br> ? simultaneously machining the 2 sides of the frame<br> ? sawing or drilling units can work simultaneously with the milling head to save time<br> ? special fixing system WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 3900 X 2560 X 1640 MM
DESCRIPTION: ? CNC MACHINING CENTER
? SERIAL NUMBER 02-48
? WORKING AREA APPROX. 2500 X 650 MM
? VERTICAL MILLING HEAD WITH MOTOR 1.12 KW-MAX. 18000 RPM
? 2 X CUTTING GROUP: TILTING UP TO 45°, BLADE SAW DIAMETER 300 MM, MOTOR 3 KW-2780 RPM
? 2 X DRILLING UNIT: INCLINED AT 45°, 13 DRILLS EACH, MOTOR 1.50 KW-2750 RPM
? SIMULTANEOUSLY MACHINING THE 2 SIDES OF THE FRAME
? SAWING OR DRILLING UNITS CAN WORK SIMULTANEOUSLY WITH THE MILLING HEAD TO SAVE TIME
? SPECIAL FIXING SYSTEM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-capacity, tons: 1600
nominal force exhaust traverse, tons:
1 step pressure: 500 
2 step pressure: 1000 
3 step pressure: 1600 
rated force of clamping traverse, tons:
1 step pressure: 500 
2 step pressure: 1000 
rated force of the cylinder return stroke, tons: 320
the exhaust traverse stroke, mm: 2500
the clamping traverse stroke, mm: 2500
greatest distance between table and exhaust traverse, mm: 3900
moving table size, mm: 3550 x 3550 
moving table stroke, mm: 3550
distance daylight between stroke stopper, mm:
from left to right: 2130
front to back: 3730
cushion capacity, nominal (central ejector), t.: 500
cushion stroke above bed (central ejector), mm.: 900
cushion capacity, nominal (side ejector), t.: 630
cushion stroke above bed (side ejector), mm.: 900
the dimensions of the entire setup, mm:
length: 18750
width: 10560
height: 16400
height over floor level, mm: 10900
press weight, tons: 682

yom: approx.1985    CAPACITY, TONS: 1600 NOMINAL FORCE EXHAUST TRAVERSE, TONS: 1 STEP PRESSURE: 500 2 STEP PRESSURE: 1000 3 STEP PRESSURE: 1600 RATED FORCE OF CLAMPING TRAVERSE, TONS: 1 STEP PRESSURE: 500 2 STEP PRESSURE: 1000 RATED FORCE OF THE CYLINDER RETURN STROKE, TONS: 320 THE EXHAUST TRAVERSE STROKE, MM: 2500 THE CLAMPING TRAVERSE STROKE, MM: 2500 GREATEST DISTANCE BETWEEN TABLE AND EXHAUST TRAVERSE, MM: 3900 MOVING TABLE SIZE, MM: 3550 X 3550 MOVING TABLE STROKE, MM: 3550 DISTANCE DAYLIGHT BETWEEN STROKE STOPPER, MM: FROM LEFT TO RIGHT: 2130 FRONT TO BACK: 3730 CUSHION CAPACITY, NOMINAL (CENTRAL EJECTOR), T.: 500 CUSHION STROKE ABOVE BED (CENTRAL EJECTOR), MM.: 900 CUSHION CAPACITY, NOMINAL (SIDE EJECTOR), T.: 630 CUSHION STROKE ABOVE BED (SIDE EJECTOR), MM.: 900 THE DIMENSIONS OF THE ENTIRE SETUP, MM: LENGTH: 18750 WIDTH: 10560 HEIGHT: 16400 HEIGHT OVER FLOOR LEVEL, MM: 10900 PRESS WEIGHT, TONS: 682 YOM: APPROX.1985
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-amtec horizonpack rotary premade pouch (flat, doypack) 6 stations - 45-6m<br><br>premade pouches packaging/filling and closing machine, rotary operation with 6 working positions. suitable for flat pouches and doypack style pouches. easy operation through touch screen and siemens plc, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (ss304). can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. suitable for a wide range of film materials like compound/monolayer pe, pp, paper, etc. (please ask for details). bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed. sucking unit to open all kind of bags with thinner film material. suitable for the following bag dimensions: l(100-350)xw(100-210)mm. - technical specifications: max. speed of the machine in neutral: 45 cycles/minute | power: 380v, 2.5kw | compressed air: 0.6m³, 6bar | machine dimensions: l2214xw1850xh1640mm | weight: 1000kg.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC HORIZONPACK ROTARY PREMADE POUCH (FLAT, DOYPACK) 6 STATIONS - 45-6M

PREMADE POUCHES PACKAGING/FILLING AND CLOSING MACHINE, ROTARY OPERATION WITH 6 WORKING POSITIONS. SUITABLE FOR FLAT POUCHES AND DOYPACK STYLE POUCHES. EASY OPERATION THROUGH TOUCH SCREEN AND SIEMENS PLC, FREQUENCY CONVERSIOIN FOR SPEED ADJUSTMENT, NO-POUCH- (OR NO OPEN POUCH) NO-FILLING/SEAL FUNCTION. MOTORIZED BAG WIDTH ADJUSTMENT, OIL FREE PLASTIC BEARINGS, ALL PRODUCT OR BAG CONTACTING PARTS ARE MADE OF STAINLESS STEEL (SS304). CAN BE USED WITH ALL KINDS OF INFEED/DOSING MODULES (OPTIONAL) TO PACK GRANULATE LIKE PRODUCTS, LIQUIDS, PASTES, POWDES, ETC. SUITABLE FOR A WIDE RANGE OF FILM MATERIALS LIKE COMPOUND/MONOLAYER PE, PP, PAPER, ETC. (PLEASE ASK FOR DETAILS). BAG INFEED VERTICALLY WITH HOPPER (FOR FLAT BAGS), OPTIONALLY: HORIZONTALLY INFEED. SUCKING UNIT TO OPEN ALL KIND OF BAGS WITH THINNER FILM MATERIAL. SUITABLE FOR THE FOLLOWING BAG DIMENSIONS: L(100-350)XW(100-210)MM. - TECHNICAL SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 45 CYCLES/MINUTE | POWER: 380V, 2.5KW | COMPRESSED AIR: 0.6M³, 6BAR | MACHINE DIMENSIONS: L2214XW1850XH1640MM | WEIGHT: 1000KG.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-surface planer jarome dsvc-40

-machine in stock
-after reviewing the technical
-production of polish

technical parameters:

-planing width 400 mm
maximum chip thickness 8 mm
-cutting speed m/s 29
-motor power 4 kw

-feeding table length 1640 mm
-the receiving table length 1250 mm
-the total length of the tables 2890 mm

-four knives
-shaft diameter 110 mm
-brake
-desktop

– setting the guide 0 SURFACE PLANER JAROME DSVC-40 -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -PRODUCTION OF POLISH TECHNICAL PARAMETERS: -PLANING WIDTH 400 MM MAXIMUM CHIP THICKNESS 8 MM -CUTTING SPEED M/S 29 -MOTOR POWER 4 KW -FEEDING TABLE LENGTH 1640 MM -THE RECEIVING TABLE LENGTH 1250 MM -THE TOTAL LENGTH OF THE TABLES 2890 MM -FOUR KNIVES -SHAFT DIAMETER 110 MM -BRAKE -DESKTOP – SETTING THE GUIDE 0 "-45" -DIMENSION GUIDE 1270 MM X 150 MM -DIAMETER MM 140 -THE MINIMUM AIR TRANSPORT SPEED M/S 19 -INTAKE AIR SAWDUST M3/H 1100 OVERALL DIMENSIONS -THE LENGTH OF THE 2950MM -WIDTH: 1300 MM -HEIGHT 1280 MM -WEIGHT 800 KG
Vendedor: StanDrew
Año de construcción: usado
Precio: used machinery auction RESALE 150 €
Ubicación: Land-weight approx.: 80 kg<br/>dimensions (l x w x h) approx.: 780 x 475 x 1640 mm<br/>description: red matt melamine lacquer finish WEIGHT APPROX.: 80 KG
DIMENSIONS (L X W X H) APPROX.: 780 X 475 X 1640 MM
DESCRIPTION: RED MATT MELAMINE LACQUER FINISH
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
obtaczarka for pins safo dnaa 140

-machine in stock
-production of polish safo

-year of production 2005
-ce certificate
-user manual

technical parameters:

-the range of machined pins 4-140 mm
-max input material diameter 160 mm
-min length of input material 700 mm

-head speed 2150obr/min
-adjustable feed speed

-feed motor 2, 2kw
-knife head drive motor 18.5 kw

-diameter exhaust-200 mm

dimensions:

-length: 280
width 117cm
-height 125 cm

-weight 1640kg

obtaczarki type of dnaa-140 is intended for fine turning of shafts and wooden stakes with diameters of 40 to 140 mm and minimum length of 700 mm.

machined rollers are used in the construction of cottages, recreational facilities, playgrounds for children and for the construction of various types of fences and guards.

optional equipment:

dust collectors, reducers, hose
 OBTACZARKA FOR PINS SAFO DNAA 140 -MACHINE IN STOCK -PRODUCTION OF POLISH SAFO -YEAR OF PRODUCTION 2005 -CE CERTIFICATE -USER MANUAL TECHNICAL PARAMETERS: -THE RANGE OF MACHINED PINS 4-140 MM -MAX INPUT MATERIAL DIAMETER 160 MM -MIN LENGTH OF INPUT MATERIAL 700 MM -HEAD SPEED 2150OBR/MIN -ADJUSTABLE FEED SPEED -FEED MOTOR 2, 2KW -KNIFE HEAD DRIVE MOTOR 18.5 KW -DIAMETER EXHAUST-200 MM DIMENSIONS: -LENGTH: 280 WIDTH 117CM -HEIGHT 125 CM -WEIGHT 1640KG OBTACZARKI TYPE OF DNAA-140 IS INTENDED FOR FINE TURNING OF SHAFTS AND WOODEN STAKES WITH DIAMETERS OF 40 TO 140 MM AND MINIMUM LENGTH OF 700 MM. MACHINED ROLLERS ARE USED IN THE CONSTRUCTION OF COTTAGES, RECREATIONAL FACILITIES, PLAYGROUNDS FOR CHILDREN AND FOR THE CONSTRUCTION OF VARIOUS TYPES OF FENCES AND GUARDS. OPTIONAL EQUIPMENT: DUST COLLECTORS, REDUCERS, HOSE
Vendedor: StanDrew
Año de construcción: usado
Precio: used machinery auction RESALE 150 €
Ubicación: Land-weight approx.: 80 kg<br/>dimensions (l x w x h) approx.: 780 x 475 x 1640 mm<br/>description: red matt melamine lacquer finish WEIGHT APPROX.: 80 KG
DIMENSIONS (L X W X H) APPROX.: 780 X 475 X 1640 MM
DESCRIPTION: RED MATT MELAMINE LACQUER FINISH
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 3.650 €
Ubicación: Land-for transfer of liquids, must, de-stalked grapes, yeast

performance: 
1° vel. 380 hl/h
2° vel. 700 hl/h

technical data:
type: 2c 700x
year: 1995
volt/hz: 380/50
thread connection: dn 75

measurements and weight:	
total height:     1400  mm
width:               1000 mm
length:             1640 mm
weight approx.         kg
			

FOR TRANSFER OF LIQUIDS, MUST, DE-STALKED GRAPES, YEAST PERFORMANCE: 1° VEL. 380 HL/H 2° VEL. 700 HL/H TECHNICAL DATA: TYPE: 2C 700X YEAR: 1995 VOLT/HZ: 380/50 THREAD CONNECTION: DN 75 MEASUREMENTS AND WEIGHT: TOTAL HEIGHT: 1400 MM WIDTH: 1000 MM LENGTH: 1640 MM WEIGHT APPROX. KG
Vendedor: Eurolux GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 350 €
Ubicación: Land-weight approx.: 85 kg<br/>dimensions (l x w x h) approx.: 800 x 1200 x 1100 mm<br/>description: power 0,55 hp, suction flow 3400 m2/h, max. working speed 4 km/h, with battery charger WEIGHT APPROX.: 85 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 1200 X 1100 MM
DESCRIPTION: POWER 0,55 HP, SUCTION FLOW 3400 M2/H, MAX. WORKING SPEED 4 KM/H, WITH BATTERY CHARGER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-in good technical condition.
production in 2012.
1640 x 2600mm t slot table
spindle 5600w, 2400 u / min. er
cooling system with vortex tube (6.8 m3 / h), muffler.
three-phase inverter, key bits
the laser sampling probe contains an optical probe IN GOOD TECHNICAL CONDITION. PRODUCTION IN 2012. 1640 X 2600MM T SLOT TABLE SPINDLE 5600W, 2400 U / MIN. ER COOLING SYSTEM WITH VORTEX TUBE (6.8 M3 / H), MUFFLER. THREE-PHASE INVERTER, KEY BITS THE LASER SAMPLING PROBE CONTAINS AN OPTICAL PROBE
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Precio: used machinery auction RESALE 120 €
Ubicación: Land-weight approx.: 80 kg<br/>dimensions (l x w x h) approx.: 1040 x 380 x 1640 mm<br/>description: bookcase size 520 x 380 x 1640 mm each<br> with gloss lacquered finishes and upper glass insert WEIGHT APPROX.: 80 KG
DIMENSIONS (L X W X H) APPROX.: 1040 X 380 X 1640 MM
DESCRIPTION: BOOKCASE SIZE 520 X 380 X 1640 MM EACH
WITH GLOSS LACQUERED FINISHES AND UPPER GLASS INSERT
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-hsm vertical baling press, type v-press 1160 eco plus, press power ca. 54 t, motor power 7,5 kw, constructed in 2005
technical specifications
manufacturer hsm gmbh & co. kg
type v-press 1160 eco plus
year of construction 2005
operation houers 8 h
press power approx. 54 t
motor power 7,5 kw
loading aperture 1195 x 650 mm
bale weights up to 550 kg (depending on material)
max. bale size 1200 x 1100 x 1200 mm (l x w x h)
hourly output in bales  1-2
press chamber size 1195 x 1100 x 1640 mm (w x d x h)
machine dimensions 1737 x 1568 x 2986 mm (w x d x h)
strapping 4-fold
machine weight approx. 2250 kg HSM VERTICAL BALING PRESS, TYPE V-PRESS 1160 ECO PLUS, PRESS POWER CA. 54 T, MOTOR POWER 7,5 KW, CONSTRUCTED IN 2005 TECHNICAL SPECIFICATIONS MANUFACTURER HSM GMBH & CO. KG TYPE V-PRESS 1160 ECO PLUS YEAR OF CONSTRUCTION 2005 OPERATION HOUERS 8 H PRESS POWER APPROX. 54 T MOTOR POWER 7,5 KW LOADING APERTURE 1195 X 650 MM BALE WEIGHTS UP TO 550 KG (DEPENDING ON MATERIAL) MAX. BALE SIZE 1200 X 1100 X 1200 MM (L X W X H) HOURLY OUTPUT IN BALES 1-2 PRESS CHAMBER SIZE 1195 X 1100 X 1640 MM (W X D X H) MACHINE DIMENSIONS 1737 X 1568 X 2986 MM (W X D X H) STRAPPING 4-FOLD MACHINE WEIGHT APPROX. 2250 KG
Vendedor: RDA Recycling Machinery GmbH
Año de construcción: usado
Ubicación: Land-make machines collette, type mph 300, no 93hps03000035, planetary mixer , material stainless steel , 1 mixing/kneading shaft , with scraper , motor 5,5 kw, 380 volt, with cover , with pan (3x), pan material stainless steel , capacity 300 ltr, pan sizes dia. 780x700mm, outlet dia. 100mm, with hydraulic lifting , with switchgear , floor space 1,9x1,1 m, total height 2,9 m, weight 1640 kgplanetary mixersmixers > planetary mixers what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE MACHINES COLLETTE, TYPE MPH 300, NO 93HPS03000035, PLANETARY MIXER , MATERIAL STAINLESS STEEL , 1 MIXING/KNEADING SHAFT , WITH SCRAPER , MOTOR 5,5 KW, 380 VOLT, WITH COVER , WITH PAN (3X), PAN MATERIAL STAINLESS STEEL , CAPACITY 300 LTR, PAN SIZES DIA. 780X700MM, OUTLET DIA. 100MM, WITH HYDRAULIC LIFTING , WITH SWITCHGEAR , FLOOR SPACE 1,9X1,1 M, TOTAL HEIGHT 2,9 M, WEIGHT 1640 KGPLANETARY MIXERSMIXERS > PLANETARY MIXERS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-no. 04114

hacker weima eco 600

used, bj. 2007, good condition
compl. outdated / renewed parts in the august 2018: bearings, v-belts, gear, compl. knife set
main motor 15 kw
intake: 600 mm x 800 mm funnel content: 0,6 mâ³ sieve diameter 1.5 cm rotor diameter 252 mm rotor length 600 mm rotor speed 60 / 100 rpm tools: 14 v-blade
suction connector 160 mm air speed 28 m / s weight approx. 1000 kg
transport dimensions: 1700 x 1100 x 1640 mm

used machinery and equipment without further warranty.
on technical data and year of manufacture warranty!

subject to prior sale

delivery: from stock our general terms and conditions apply, see in the   NO. 04114 HACKER WEIMA ECO 600 USED, BJ. 2007, GOOD CONDITION COMPL. OUTDATED / RENEWED PARTS IN THE AUGUST 2018: BEARINGS, V-BELTS, GEAR, COMPL. KNIFE SET MAIN MOTOR 15 KW INTAKE: 600 MM X 800 MM FUNNEL CONTENT: 0,6 M&ACIRC;&SUP3; SIEVE DIAMETER 1.5 CM ROTOR DIAMETER 252 MM ROTOR LENGTH 600 MM ROTOR SPEED 60 / 100 RPM TOOLS: 14 V-BLADE SUCTION CONNECTOR 160 MM AIR SPEED 28 M / S WEIGHT APPROX. 1000 KG TRANSPORT DIMENSIONS: 1700 X 1100 X 1640 MM USED MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. ON TECHNICAL DATA AND YEAR OF MANUFACTURE WARRANTY! SUBJECT TO PRIOR SALE DELIVERY: FROM STOCK OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-make r.v.h. machinefabriek born, no 04336 / 179180, new 1990, reactor (1x), material stainless steel (1.4571), capacity 6200 ltr, vessel sizes dia. 1900x1640mm, conical bottom , dished top side , manhole /hand hole dia. 240mm, top connections dia.250mm+6xdia.40mm+2xdia.50mm+2xdia.80mm, outlet dia. 125mm, working pressure vac/3 bar, test pressure 4,2 bar, with jacket (3x 70 ltr), working pressure 4 bar, test pressure 7 bar, max. temperature -20/+155 degr. c., with gate type stirrer make ekato, type em-100, motor 11,0 kw, 380 volt (ex), speed mixing shaft ± 45 rpm, floorspace 2,4x2,4 m, total height 4,7 mreactorsreactors > reactors what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE R.V.H. MACHINEFABRIEK BORN, NO 04336 / 179180, NEW 1990, REACTOR (1X), MATERIAL STAINLESS STEEL (1.4571), CAPACITY 6200 LTR, VESSEL SIZES DIA. 1900X1640MM, CONICAL BOTTOM , DISHED TOP SIDE , MANHOLE /HAND HOLE DIA. 240MM, TOP CONNECTIONS DIA.250MM+6XDIA.40MM+2XDIA.50MM+2XDIA.80MM, OUTLET DIA. 125MM, WORKING PRESSURE VAC/3 BAR, TEST PRESSURE 4,2 BAR, WITH JACKET (3X 70 LTR), WORKING PRESSURE 4 BAR, TEST PRESSURE 7 BAR, MAX. TEMPERATURE -20/+155 DEGR. C., WITH GATE TYPE STIRRER MAKE EKATO, TYPE EM-100, MOTOR 11,0 KW, 380 VOLT (EX), SPEED MIXING SHAFT ± 45 RPM, FLOORSPACE 2,4X2,4 M, TOTAL HEIGHT 4,7 MREACTORSREACTORS > REACTORS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-for sale used cam prx horizontal cartoner

manufacturer: cam fabrication / tecnomaco  s.r.l. ( italy )
type: prx
year: 2001
carton format: a  15 to 90 mm / b  15 to 50 mm / c  50 to 200 mm / a + b max 135 mm
speed: from 20 to 120 cpm
power: 380 v., 1,94 kw, 3-phase
air: 4 - 6 bar
weight: 1000 kg
dimensions: l 2150 mm / w 1500 mm / h 1640 mm
pre folded leaflet inserter 
user manual
good condition 
 FOR SALE USED CAM PRX HORIZONTAL CARTONER MANUFACTURER: CAM FABRICATION / TECNOMACO S.R.L. ( ITALY ) TYPE: PRX YEAR: 2001 CARTON FORMAT: A 15 TO 90 MM / B 15 TO 50 MM / C 50 TO 200 MM / A + B MAX 135 MM SPEED: FROM 20 TO 120 CPM POWER: 380 V., 1,94 KW, 3-PHASE AIR: 4 - 6 BAR WEIGHT: 1000 KG DIMENSIONS: L 2150 MM / W 1500 MM / H 1640 MM PRE FOLDED LEAFLET INSERTER USER MANUAL GOOD CONDITION
Vendedor: Konepankki
Año de construcción: usado
Ubicación: Land-make r.v.h. machinefabriek born, no 04336 / 179179, new 1990, reactor (1x), material stainless steel (1.4571), capacity 6200 ltr, vessel sizes dia. 1900x1640mm, conical bottom , dished top side , manhole /hand hole dia. 240mm, top connections dia.250mm+6xdia.40mm+2xdia.50mm+2xdia.80mm, outlet dia. 125mm, working pressure vac/3 bar, test pressure 4,2 bar, with jacket (3x 70 ltr), working pressure 4 bar, test pressure 7 bar, max. temperature -20/+155 degr. c., with gate type stirrer make ekato, type em-100, motor 11,0 kw, 380 volt (ex), speed mixing shaft ± 45 rpm, floorspace 2,4x2,4 m, total height 4,7 mreactorsreactors > reactors what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE R.V.H. MACHINEFABRIEK BORN, NO 04336 / 179179, NEW 1990, REACTOR (1X), MATERIAL STAINLESS STEEL (1.4571), CAPACITY 6200 LTR, VESSEL SIZES DIA. 1900X1640MM, CONICAL BOTTOM , DISHED TOP SIDE , MANHOLE /HAND HOLE DIA. 240MM, TOP CONNECTIONS DIA.250MM+6XDIA.40MM+2XDIA.50MM+2XDIA.80MM, OUTLET DIA. 125MM, WORKING PRESSURE VAC/3 BAR, TEST PRESSURE 4,2 BAR, WITH JACKET (3X 70 LTR), WORKING PRESSURE 4 BAR, TEST PRESSURE 7 BAR, MAX. TEMPERATURE -20/+155 DEGR. C., WITH GATE TYPE STIRRER MAKE EKATO, TYPE EM-100, MOTOR 11,0 KW, 380 VOLT (EX), SPEED MIXING SHAFT ± 45 RPM, FLOORSPACE 2,4X2,4 M, TOTAL HEIGHT 4,7 MREACTORSREACTORS > REACTORS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-technical data:
	 
	-width approx.							1005 mm
	-height approx.							1985 mm
	-depth approx.							1050 mm
	-top plate thickness approx.						    95 mm
	-9 piece t slots in the long side of the thigh length 1005 mm each
	-t-slot din 650 size 24
-centre distance of the t-slot table top 200 mm each
	-6 piece elongated holes in the short side of thigh weight approx. 145 x 28 mm -						            2800 kg
 TECHNICAL DATA: -WIDTH APPROX. 1005 MM -HEIGHT APPROX. 1985 MM -DEPTH APPROX. 1050 MM -TOP PLATE THICKNESS APPROX. 95 MM -9 PIECE T SLOTS IN THE LONG SIDE OF THE THIGH LENGTH 1005 MM EACH -T-SLOT DIN 650 SIZE 24 -CENTRE DISTANCE OF THE T-SLOT TABLE TOP 200 MM EACH -6 PIECE ELONGATED HOLES IN THE SHORT SIDE OF THIGH WEIGHT APPROX. 145 X 28 MM - 2800 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 127 €
Ubicación: Land-weight approx.: 2 kg<br/>dimensions (l x w x h) approx.: 350 x 200 x 100 mm<br/>description: 2.31 tft lcd panel, 300 contrast, max 6 working hours battery, 0 lux minimum illumination, 640 x 480 effective pixels WEIGHT APPROX.: 2 KG
DIMENSIONS (L X W X H) APPROX.: 350 X 200 X 100 MM
DESCRIPTION: 2.31 TFT LCD PANEL, 300 CONTRAST, MAX 6 WORKING HOURS BATTERY, 0 LUX MINIMUM ILLUMINATION, 640 X 480 EFFECTIVE PIXELS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cast iron clamping cube
length 1500 mm
height 930 mm
depth 775 mm
smooth superior face
vertical face with 7 t-slots 42 x 22 mm
fixing base length 1640 mm
weight approx 2,2 t

machine in our stock in france. CAST IRON CLAMPING CUBE LENGTH 1500 MM HEIGHT 930 MM DEPTH 775 MM SMOOTH SUPERIOR FACE VERTICAL FACE WITH 7 T-SLOTS 42 X 22 MM FIXING BASE LENGTH 1640 MM WEIGHT APPROX 2,2 T MACHINE IN OUR STOCK IN FRANCE.
Vendedor: Retec Machines S.A.S
Año de construcción: usado
Ubicación: Land-make apparate- und behältertechnik harrislee gmbh, type pvi, no 164044, new 1994, vertical pressure tank (1x), material stainless steel (316), capacity 1500 ltr, vessel sizes dia. 1200x1200mm, vessel insulated, dished top , dished bottom , manhole dia. 500mm, working pressure vac/6 bar, max. temperature 180 degr. c., mounted on legs , floorspace 1,3x1,3 m, total height 2,2 mpressure vesselstanks > pressure vessels what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE APPARATE- UND BEHäLTERTECHNIK HARRISLEE GMBH, TYPE PVI, NO 164044, NEW 1994, VERTICAL PRESSURE TANK (1X), MATERIAL STAINLESS STEEL (316), CAPACITY 1500 LTR, VESSEL SIZES DIA. 1200X1200MM, VESSEL INSULATED, DISHED TOP , DISHED BOTTOM , MANHOLE DIA. 500MM, WORKING PRESSURE VAC/6 BAR, MAX. TEMPERATURE 180 DEGR. C., MOUNTED ON LEGS , FLOORSPACE 1,3X1,3 M, TOTAL HEIGHT 2,2 MPRESSURE VESSELSTANKS > PRESSURE VESSELS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 4.950 €
Ubicación: Land-bottom shelves, small-parts warehouse, small-parts shelves, storage shelves, workshop shelf, push shelf

data:
-h: approx. 200 cm
-t: approx. 40 cm
-l: approx. 100 yds

shelf 100 meters comprising:
-83 x stands approx. 200 x 40 cm.
-floor 410 x 122 x 40 cm.
-1640 x clip for shelf
-incl. cross clamp.

-manufacturer: nedcon sf1
-load: 175 kg per floor, with a uniformly distributed load.
-levels: 5 x storage levels.
-shelves zinc plated.
-stand painted in blue.
-used goods ex warehouse.
-other amounts available!

price:
â?¬4950 net
â?¬5890,50 gross
you will receive an invoice with expelled vat

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly. BOTTOM SHELVES, SMALL-PARTS WAREHOUSE, SMALL-PARTS SHELVES, STORAGE SHELVES, WORKSHOP SHELF, PUSH SHELF DATA: -H: APPROX. 200 CM -T: APPROX. 40 CM -L: APPROX. 100 YDS SHELF 100 METERS COMPRISING: -83 X STANDS APPROX. 200 X 40 CM. -FLOOR 410 X 122 X 40 CM. -1640 X CLIP FOR SHELF -INCL. CROSS CLAMP. -MANUFACTURER: NEDCON SF1 -LOAD: 175 KG PER FLOOR, WITH A UNIFORMLY DISTRIBUTED LOAD. -LEVELS: 5 X STORAGE LEVELS. -SHELVES ZINC PLATED. -STAND PAINTED IN BLUE. -USED GOODS EX WAREHOUSE. -OTHER AMOUNTS AVAILABLE! PRICE: &ACIRC;?&NOT;4950 NET &ACIRC;?&NOT;5890,50 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-make harrislee gmbh harrislee/flensburg, type pvi, no 164039, new 1994, vertical pressure tank (1x), material stainless steel , capacity 340 ltr, vessel sizes dia. 600x1100mm, vessel insulated, dished top , dished bottom , manhole /hand hole dia. 165mm, outlet dia. 25mm, working pressure vac/6 bar, max. temperature 180 degr. c., mounted on legs , floorspace 0,8x0,8 m, total height 2,0 mpressure vesselstanks > pressure vessels what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE HARRISLEE GMBH HARRISLEE/FLENSBURG, TYPE PVI, NO 164039, NEW 1994, VERTICAL PRESSURE TANK (1X), MATERIAL STAINLESS STEEL , CAPACITY 340 LTR, VESSEL SIZES DIA. 600X1100MM, VESSEL INSULATED, DISHED TOP , DISHED BOTTOM , MANHOLE /HAND HOLE DIA. 165MM, OUTLET DIA. 25MM, WORKING PRESSURE VAC/6 BAR, MAX. TEMPERATURE 180 DEGR. C., MOUNTED ON LEGS , FLOORSPACE 0,8X0,8 M, TOTAL HEIGHT 2,0 MPRESSURE VESSELSTANKS > PRESSURE VESSELS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-10.000l mixer

inlet5500 mm x 1640 mm
 10.000L MIXER INLET5500 MM X 1640 MM
Vendedor: Kornudstyr
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 805 kg<br/>dimensions (l x w x h) approx.: 1640 x 920 x 940 mm<br/>description: rotating compressor, operating pressure: 7bar, actual flow rate: 270m³/h, rotational speed: 1450 rpm, vacuum 1 -: snimar 404473, maximum pressure: 8.2 bar, generated flow rate: 335, motor: 40. stock number: 14473 attention: machine loaded on overhead crane. WEIGHT APPROX.: 805 KG
DIMENSIONS (L X W X H) APPROX.: 1640 X 920 X 940 MM
DESCRIPTION: ROTATING COMPRESSOR, OPERATING PRESSURE: 7BAR, ACTUAL FLOW RATE: 270M³/H, ROTATIONAL SPEED: 1450 RPM, VACUUM 1 -: SNIMAR 404473, MAXIMUM PRESSURE: 8.2 BAR, GENERATED FLOW RATE: 335, MOTOR: 40. STOCK NUMBER: 14473 ATTENTION: MACHINE LOADED ON OVERHEAD CRANE.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cnc lathe boe wrestler vdf 25 ma maximum circulation bed 600 mm
maximum turning length 400 mm
collision-free up to the drum revolver b. plan turn 270 mm
turning length: 270 mm
support travel - z-axis above 650/1140/1640/2390
x axis above 340 mm
z-axis below 865/985/1485/2235
x-axis below 305 mm
spindle head: 8 gr.
chuck: 250/315
spindle bore: 78 mm
spindel-in the front bearing 120 mm
quill thrust max 14 kn
inside taper mount 30 sk CNC LATHE BOE WRESTLER VDF 25 MA MAXIMUM CIRCULATION BED 600 MM MAXIMUM TURNING LENGTH 400 MM COLLISION-FREE UP TO THE DRUM REVOLVER B. PLAN TURN 270 MM TURNING LENGTH: 270 MM SUPPORT TRAVEL - Z-AXIS ABOVE 650/1140/1640/2390 X AXIS ABOVE 340 MM Z-AXIS BELOW 865/985/1485/2235 X-AXIS BELOW 305 MM SPINDLE HEAD: 8 GR. CHUCK: 250/315 SPINDLE BORE: 78 MM SPINDEL-IN THE FRONT BEARING 120 MM QUILL THRUST MAX 14 KN INSIDE TAPER MOUNT 30 SK
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 44.000 €
Ubicación: Land-g 103
ammonia ice water cooling plant and one thannki
ice water tank
-  1 grasso cooling compressors, 
   with 540 kwh per hour cooling capacity
   manufacturer year is 1992

  - 1. grasso cooling compressor machine, 
    type: rc 411, 75 kw/h el.  
     power. 351 kw by -4 bis + 35°c
  -  which an elelctric load control switching of device for each 
    compressor, installed in 2006 
 -  1 complete electronic plant, siemens s 5    
  - 1 room ventilation system wit 2 air outlets.
     length of the air channel is approx. 8 m
  
  1 thannki ice water silo tank
   standing on a concret platform
   total content:123.000 l
   manufact. no. 7708-1, 7708-2,7708-3,7708-4
   manufacturer year: 1992
   nh3 content: 4 x 1640 kg, the 4 section
   can work in a separate position

- 1 lying installed amonia  separating tank
   manufacturer is comp. witt achen
   content 2.700 l, no. 63091/41
   complete with hot gas melded and with 
   4 amonia pumps


  - 1 amonia evaporation condensate plant
     cap. 800 kw, type: rrv 314
     manufacturer year is 1992
     manufacturer is raffel
    cooling capacity: 701 kw 
    with 3 vans
    water circulation with 70,3 m³/h
    spray pipe was installed new in 2013
    also the beld drive of the vans

  - 1  amonia gas warning system
     with tele module and with 3 senors
     manufacturer year is 2008

price up standing place: 		           44.000,00 euro







  G 103 AMMONIA ICE WATER COOLING PLANT AND ONE THANNKI ICE WATER TANK - 1 GRASSO COOLING COMPRESSORS, WITH 540 KWH PER HOUR COOLING CAPACITY MANUFACTURER YEAR IS 1992 - 1. GRASSO COOLING COMPRESSOR MACHINE, TYPE: RC 411, 75 KW/H EL. POWER. 351 KW BY -4 BIS + 35°C - WHICH AN ELELCTRIC LOAD CONTROL SWITCHING OF DEVICE FOR EACH COMPRESSOR, INSTALLED IN 2006 - 1 COMPLETE ELECTRONIC PLANT, SIEMENS S 5 - 1 ROOM VENTILATION SYSTEM WIT 2 AIR OUTLETS. LENGTH OF THE AIR CHANNEL IS APPROX. 8 M 1 THANNKI ICE WATER SILO TANK STANDING ON A CONCRET PLATFORM TOTAL CONTENT:123.000 L MANUFACT. NO. 7708-1, 7708-2,7708-3,7708-4 MANUFACTURER YEAR: 1992 NH3 CONTENT: 4 X 1640 KG, THE 4 SECTION CAN WORK IN A SEPARATE POSITION - 1 LYING INSTALLED AMONIA SEPARATING TANK MANUFACTURER IS COMP. WITT ACHEN CONTENT 2.700 L, NO. 63091/41 COMPLETE WITH HOT GAS MELDED AND WITH 4 AMONIA PUMPS - 1 AMONIA EVAPORATION CONDENSATE PLANT CAP. 800 KW, TYPE: RRV 314 MANUFACTURER YEAR IS 1992 MANUFACTURER IS RAFFEL COOLING CAPACITY: 701 KW WITH 3 VANS WATER CIRCULATION WITH 70,3 M³/H SPRAY PIPE WAS INSTALLED NEW IN 2013 ALSO THE BELD DRIVE OF THE VANS - 1 AMONIA GAS WARNING SYSTEM WITH TELE MODULE AND WITH 3 SENORS MANUFACTURER YEAR IS 2008 PRICE UP STANDING PLACE: 44.000,00 EURO
Vendedor: LM Dairy Consulting
Año de construcción: usado
Precio: 90 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-max. rotational speed: 1640/min, max. kinetic energy: 175.808n, wall thickness: 8mm, material: stainless steel 1.4571, was completely overhauled in 2007.  MAX. ROTATIONAL SPEED: 1640/MIN, MAX. KINETIC ENERGY: 175.808N, WALL THICKNESS: 8MM, MATERIAL: STAINLESS STEEL 1.4571, WAS COMPLETELY OVERHAULED IN 2007.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 150 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-spiral mixer dough machine
boku
model: sk 160 ak
with retractable tank car
kneading machine for up to 160 kg dough
stainless steel boiler and spiral
cover with switch ring
2 timers with 2 courses
raising and lowering control
connection 400v, 32a-cee plug
checked dguv v3

reconditioned second-hand machine
SPIRAL MIXER DOUGH MACHINE BOKU MODEL: SK 160 AK WITH RETRACTABLE TANK CAR KNEADING MACHINE FOR UP TO 160 KG DOUGH STAINLESS STEEL BOILER AND SPIRAL COVER WITH SWITCH RING 2 TIMERS WITH 2 COURSES RAISING AND LOWERING CONTROL CONNECTION 400V, 32A-CEE PLUG CHECKED DGUV V3 RECONDITIONED SECOND-HAND MACHINE
Vendedor: Milbrandt GmbH
Año de construcción: usado
Precio: 240 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-max. output: 2000components/h, component dimensions: 0.25-30x0.2-30x0.1-22mm, compressed air supply: 6-10bar, controls: adept mv19, length: 1530mm, width: 1640mm, height: 1640mm, weight: 1.4t, a defective machine is additionally available, which can be used as a source of spare parts. MAX. OUTPUT: 2000COMPONENTS/H, COMPONENT DIMENSIONS: 0.25-30X0.2-30X0.1-22MM, COMPRESSED AIR SUPPLY: 6-10BAR, CONTROLS: ADEPT MV19, LENGTH: 1530MM, WIDTH: 1640MM, HEIGHT: 1640MM, WEIGHT: 1.4T, A DEFECTIVE MACHINE IS ADDITIONALLY AVAILABLE, WHICH CAN BE USED AS A SOURCE OF SPARE PARTS.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 260 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-overview
brand: lvd
model: ppeb 50/20 mnc 95 
application type: bending
 machine type: bending machines 
availability: 31/10/2018 
production year: 1991
location: hungary
origin country: belgium 
production hours: 57952

general data
measurements width: 2500 mm 
measurements depth: 2000 mm 
measurements height: 2500 mm 
machine weight: 4000 kg

control unit
brand: lvd
model: mnc 95/c
cnc main language: italian/ english

main drive
pressing force: 500 kn
bending length: 2000 mm
throat: 250 mm
distance between bars: 1640 mm 
main motor power: 7.5 kw 
stroke: 125 mm

movement
y-axis working feed: 14.7 mm/sec 
y-axis rapid traverse: 100 mm/sec

max material thickness
steel: 25 mm

media
main electronic connection: 380 v / 50 hz 
power consumption: 8.5 kva

additional equipment
1: climate controlled electrical cabinet
2: pneumatically clamped dogs (4pcs)
3: basic tool set: flattening tool set, r1/26°-v8 tool set

see full technical specifications of this machine at:
abc://bit.ly/2yc0xjd OVERVIEW BRAND: LVD MODEL: PPEB 50/20 MNC 95 APPLICATION TYPE: BENDING MACHINE TYPE: BENDING MACHINES AVAILABILITY: 31/10/2018 PRODUCTION YEAR: 1991 LOCATION: HUNGARY ORIGIN COUNTRY: BELGIUM PRODUCTION HOURS: 57952 GENERAL DATA MEASUREMENTS WIDTH: 2500 MM MEASUREMENTS DEPTH: 2000 MM MEASUREMENTS HEIGHT: 2500 MM MACHINE WEIGHT: 4000 KG CONTROL UNIT BRAND: LVD MODEL: MNC 95/C CNC MAIN LANGUAGE: ITALIAN/ ENGLISH MAIN DRIVE PRESSING FORCE: 500 KN BENDING LENGTH: 2000 MM THROAT: 250 MM DISTANCE BETWEEN BARS: 1640 MM MAIN MOTOR POWER: 7.5 KW STROKE: 125 MM MOVEMENT Y-AXIS WORKING FEED: 14.7 MM/SEC Y-AXIS RAPID TRAVERSE: 100 MM/SEC MAX MATERIAL THICKNESS STEEL: 25 MM MEDIA MAIN ELECTRONIC CONNECTION: 380 V / 50 HZ POWER CONSUMPTION: 8.5 KVA ADDITIONAL EQUIPMENT 1: CLIMATE CONTROLLED ELECTRICAL CABINET 2: PNEUMATICALLY CLAMPED DOGS (4PCS) 3: BASIC TOOL SET: FLATTENING TOOL SET, R1/26°-V8 TOOL SET SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2YC0XJD
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 210 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-max. temperature: 1280°c, inside dimensions: 470x460x690mm, capacity: 140l, length: 1160mm, connected load: 10.5kw, length: 1160mm, width: 1010mm, height: 1640mm, weight: 280kg, machine was scarcely used.  MAX. TEMPERATURE: 1280°C, INSIDE DIMENSIONS: 470X460X690MM, CAPACITY: 140L, LENGTH: 1160MM, CONNECTED LOAD: 10.5KW, LENGTH: 1160MM, WIDTH: 1010MM, HEIGHT: 1640MM, WEIGHT: 280KG, MACHINE WAS SCARCELY USED.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 210 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-max. circuit board format: 510x460mm, printing accuracy: ±25µm, positioning speed: ±5µm, printing head: 3s (swing single squeegee), software: 3.49 std r1.000, system: 3.04.patch 3.05a, print cycle time: 11s, length: 1640mm, width (foundation + printer + inspection conveyer): 270+1100+600mm = 1970mm, height: 1400mm, weight: 1.5t, operational hours: 1500h, including 2d inspection (spi), inspection conveyer, print stability control and automatic cleaning system. MAX. CIRCUIT BOARD FORMAT: 510X460MM, PRINTING ACCURACY: ±25µM, POSITIONING SPEED: ±5µM, PRINTING HEAD: 3S (SWING SINGLE SQUEEGEE), SOFTWARE: 3.49 STD R1.000, SYSTEM: 3.04.PATCH 3.05A, PRINT CYCLE TIME: 11S, LENGTH: 1640MM, WIDTH (FOUNDATION + PRINTER + INSPECTION CONVEYER): 270+1100+600MM = 1970MM, HEIGHT: 1400MM, WEIGHT: 1.5T, OPERATIONAL HOURS: 1500H, INCLUDING 2D INSPECTION (SPI), INSPECTION CONVEYER, PRINT STABILITY CONTROL AND AUTOMATIC CLEANING SYSTEM.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 180 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-technical data:

-maximum working length approx.						4050 mm
	-stand round about						3630 mm
	-maximum pressing force of 125 kn
	-distance table / pestle approx.					  500 mm
	-radius 300 mm
	-adjustable stroke 250 mm
	-lifting speeds
		-backward speed idle max 100 mm / sec.
		-forward speed 75 mm / sec.
		-backward press speed 2 - 8 mm / sec.
	-total power 12 kw
	-space requirement approx.                  b h 4900 x 2800 x 2000 mm
	-weight approx.				             8500 kg
-with: - 4-axis cnc control cybelec y 1 + 2;  x, r
-driven backgauge with you. stop fingers - hydr. tool clamping
-crowning creation wila
-dual controller manual
 TECHNICAL DATA: -MAXIMUM WORKING LENGTH APPROX. 4050 MM -STAND ROUND ABOUT 3630 MM -MAXIMUM PRESSING FORCE OF 125 KN -DISTANCE TABLE / PESTLE APPROX. 500 MM -RADIUS 300 MM -ADJUSTABLE STROKE 250 MM -LIFTING SPEEDS -BACKWARD SPEED IDLE MAX 100 MM / SEC. -FORWARD SPEED 75 MM / SEC. -BACKWARD PRESS SPEED 2 - 8 MM / SEC. -TOTAL POWER 12 KW -SPACE REQUIREMENT APPROX. B H 4900 X 2800 X 2000 MM -WEIGHT APPROX. 8500 KG -WITH: - 4-AXIS CNC CONTROL CYBELEC Y 1 + 2; X, R -DRIVEN BACKGAUGE WITH YOU. STOP FINGERS - HYDR. TOOL CLAMPING -CROWNING CREATION WILA -DUAL CONTROLLER MANUAL
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 150 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more PORTOTECNICA types: