401 ofertas

Año de construcción: usado
Ubicación: Land-technical data:
	 
-saw blade diameter 420 mm
-blade hole 30 mm
-max cutting length 6000 mm
-smallest cutting length 90â° + 45 â° 335 mm
-see diagram below cutting area
-swivel range to inside pneumatic 90-22.5 â° - tilt range inside pneumatically 90 - 45 â°
-blade rotation speed 2800 rpm
-drive: 400 v / 2 x 4000 watts
-compressed air supply 7 bar
-air consumption per work cycle - no spray approx.	    	    40 l
						-with spray approx.	    64 l
	-space requirement approx.	   	  b h 7500 x 1600 x 1600 mm
-weight approx.						1800 kg
-by: - cutting-length adjustment with position control - saw unit swivel and tilt for high and wide profiles,.
			-as well as miter cuts possible, 22.5 â° to the inside pivot, - a separate electrical cabinet, - oil lubrication
 TECHNICAL DATA: -SAW BLADE DIAMETER 420 MM -BLADE HOLE 30 MM -MAX CUTTING LENGTH 6000 MM -SMALLEST CUTTING LENGTH 90° + 45 ° 335 MM -SEE DIAGRAM BELOW CUTTING AREA -SWIVEL RANGE TO INSIDE PNEUMATIC 90-22.5 ° - TILT RANGE INSIDE PNEUMATICALLY 90 - 45 ° -BLADE ROTATION SPEED 2800 RPM -DRIVE: 400 V / 2 X 4000 WATTS -COMPRESSED AIR SUPPLY 7 BAR -AIR CONSUMPTION PER WORK CYCLE - NO SPRAY APPROX. 40 L -WITH SPRAY APPROX. 64 L -SPACE REQUIREMENT APPROX. B H 7500 X 1600 X 1600 MM -WEIGHT APPROX. 1800 KG -BY: - CUTTING-LENGTH ADJUSTMENT WITH POSITION CONTROL - SAW UNIT SWIVEL AND TILT FOR HIGH AND WIDE PROFILES,. -AS WELL AS MITER CUTS POSSIBLE, 22.5 ° TO THE INSIDE PIVOT, - A SEPARATE ELECTRICAL CABINET, - OIL LUBRICATION
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 13.800 €
Ubicación: Land-single sided edge banding machine\r\nbrand: homag\r\ntype: optimat kr 77/a20/s2\r\nyear: 2001\r\n\r\nfor egde banding and processing from coil or as strip, up to 20mm edge thickness in lengthwise and crosswise throughfeed.\r\n\r\ntop pressure:\r\n- with driven joined v-belt\r\n- motoric height adjustable with digital position indicator\r\n\r\ncontrol nc21:\r\n- grafic surface for easy programming\r\n\r\ntechnical data:\r\n- feed stepless controllable 18 - 24 m/min.\r\n\r\n- workpiece thickness 12 - 60 mm\r\n- edge material strips max. 0,4 - 20 mm\r\n- edge material coi 0,3 - 3 mm\r\n\r\nrough milling unit\r\n2 motors each 3 kw, 150 hz., 9000 1/min.\r\n\r\nworkpiece pre-heating\r\nto heat the workpiece edge in front of the glue application for a better banding quality\r\n\r\ngluing unit a20:\r\nhotmelt qa34\r\nmelting unit with granulate tank\r\n\r\npressure zone c\r\n1 driven pre-pressure roller Ø. 150 mm\r\n6 post-pressure rollers Ø. 70 mm\r\n\r\nenn trimming unit hl83 chamfer/straight\r\n2 motors each 0,5 kw, 200 hz., 12000 1/min.\r\n\r\nchip transport belt for optimat\r\n\r\npre-milling unit 1,5 kw optimat\r\n2 motors one above the other each 1,5 kw, 200 hz., 12000 1/min.\r\n\r\nform milling unit fk 13 8-fold automatical\r\nto process the workpiece overhang on the worpiece top and bottom edge as well\r\nfor the milling of the frontal an rear workpiece edge in cooperation with end trimming and pre-milling unit.\r\n2 motors each 0,55 kw, 200 hz., 12000 1/min.\r\nautomatical 8-fold tool changer.\r\n\r\nuniversal milling unit 4 kw controlled optimat\r\ninstalled on the rear side at milling stand.\r\ncros support with spindle adjustment.\r\n1 motor 4 kw, 150 hz., 9000 1/min.\r\nswivable max. 90 degrees.\r\nincl. intermediate support electro pneumatical controlled\r\n\r\nmulti-post cleaning device mn 21 automatc\r\nfor max. 3 different profiles.\r\ntracing from top, bottom and side to chamfer milling or rounding from pre-milled pvc-edges.\r\nblowing nozzles electro pneumatical controlled.\r\n\r\npost cleaning device glued joint\r\nremove of glue rests in the area of the glued joint. tracing from top and bottom.\r\n\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding.\r\n SINGLE SIDED EDGE BANDING MACHINE\R\NBRAND: HOMAG\R\NTYPE: OPTIMAT KR 77/A20/S2\R\NYEAR: 2001\R\N\R\NFOR EGDE BANDING AND PROCESSING FROM COIL OR AS STRIP, UP TO 20MM EDGE THICKNESS IN LENGTHWISE AND CROSSWISE THROUGHFEED.\R\N\R\NTOP PRESSURE:\R\N- WITH DRIVEN JOINED V-BELT\R\N- MOTORIC HEIGHT ADJUSTABLE WITH DIGITAL POSITION INDICATOR\R\N\R\NCONTROL NC21:\R\N- GRAFIC SURFACE FOR EASY PROGRAMMING\R\N\R\NTECHNICAL DATA:\R\N- FEED STEPLESS CONTROLLABLE 18 - 24 M/MIN.\R\N\R\N- WORKPIECE THICKNESS 12 - 60 MM\R\N- EDGE MATERIAL STRIPS MAX. 0,4 - 20 MM\R\N- EDGE MATERIAL COI 0,3 - 3 MM\R\N\R\NROUGH MILLING UNIT\R\N2 MOTORS EACH 3 KW, 150 HZ., 9000 1/MIN.\R\N\R\NWORKPIECE PRE-HEATING\R\NTO HEAT THE WORKPIECE EDGE IN FRONT OF THE GLUE APPLICATION FOR A BETTER BANDING QUALITY\R\N\R\NGLUING UNIT A20:\R\NHOTMELT QA34\R\NMELTING UNIT WITH GRANULATE TANK\R\N\R\NPRESSURE ZONE C\R\N1 DRIVEN PRE-PRESSURE ROLLER Ø. 150 MM\R\N6 POST-PRESSURE ROLLERS Ø. 70 MM\R\N\R\NENN TRIMMING UNIT HL83 CHAMFER/STRAIGHT\R\N2 MOTORS EACH 0,5 KW, 200 HZ., 12000 1/MIN.\R\N\R\NCHIP TRANSPORT BELT FOR OPTIMAT\R\N\R\NPRE-MILLING UNIT 1,5 KW OPTIMAT\R\N2 MOTORS ONE ABOVE THE OTHER EACH 1,5 KW, 200 HZ., 12000 1/MIN.\R\N\R\NFORM MILLING UNIT FK 13 8-FOLD AUTOMATICAL\R\NTO PROCESS THE WORKPIECE OVERHANG ON THE WORPIECE TOP AND BOTTOM EDGE AS WELL\R\NFOR THE MILLING OF THE FRONTAL AN REAR WORKPIECE EDGE IN COOPERATION WITH END TRIMMING AND PRE-MILLING UNIT.\R\N2 MOTORS EACH 0,55 KW, 200 HZ., 12000 1/MIN.\R\NAUTOMATICAL 8-FOLD TOOL CHANGER.\R\N\R\NUNIVERSAL MILLING UNIT 4 KW CONTROLLED OPTIMAT\R\NINSTALLED ON THE REAR SIDE AT MILLING STAND.\R\NCROS SUPPORT WITH SPINDLE ADJUSTMENT.\R\N1 MOTOR 4 KW, 150 HZ., 9000 1/MIN.\R\NSWIVABLE MAX. 90 DEGREES.\R\NINCL. INTERMEDIATE SUPPORT ELECTRO PNEUMATICAL CONTROLLED\R\N\R\NMULTI-POST CLEANING DEVICE MN 21 AUTOMATC\R\NFOR MAX. 3 DIFFERENT PROFILES.\R\NTRACING FROM TOP, BOTTOM AND SIDE TO CHAMFER MILLING OR ROUNDING FROM PRE-MILLED PVC-EDGES.\R\NBLOWING NOZZLES ELECTRO PNEUMATICAL CONTROLLED.\R\N\R\NPOST CLEANING DEVICE GLUED JOINT\R\NREMOVE OF GLUE RESTS IN THE AREA OF THE GLUED JOINT. TRACING FROM TOP AND BOTTOM.\R\N\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-for the professional processing of wood or wood-like surfaces.

features:
1 combined grinding unit with:
-an automatically serving, profiled
steel contact roller with grain size compensation
to calibrate, 160 mm diameter
-an electronically controlled
limb pressure bar segment width 35 mm,.
for fine grinding
-cutting speed 18 m/s.
-80 mm wide grinding usage (felt 0.55)
-belt feed with infinitely variable feed speed, 2.5-13 m / min
-pneum.. belt tension with integrated belt edge compensation
-touch-screen display with 125 free programmable memory locations
-consistent workpiece infeed height by
adjustment of the upper part of the machine
-plate (900 mm) folding, with role
-finish brush spout side

technical data:
working width: 1350 mm
workpiece infeed height: 900 mm
tape exchange page links
workpiece thickness of 3-160 mm
belt width: 1370 mm
belt length: 2150 mm
operating voltage: 400 v / 50 hz
drive motor unit: 15 kw
dust nozzle:
1 x dm 180 mm (unit 1)
suction capacity: about 1,830 m â³/h FOR THE PROFESSIONAL PROCESSING OF WOOD OR WOOD-LIKE SURFACES. FEATURES: 1 COMBINED GRINDING UNIT WITH: -AN AUTOMATICALLY SERVING, PROFILED STEEL CONTACT ROLLER WITH GRAIN SIZE COMPENSATION TO CALIBRATE, 160 MM DIAMETER -AN ELECTRONICALLY CONTROLLED LIMB PRESSURE BAR SEGMENT WIDTH 35 MM,. FOR FINE GRINDING -CUTTING SPEED 18 M/S. -80 MM WIDE GRINDING USAGE (FELT 0.55) -BELT FEED WITH INFINITELY VARIABLE FEED SPEED, 2.5-13 M / MIN -PNEUM.. BELT TENSION WITH INTEGRATED BELT EDGE COMPENSATION -TOUCH-SCREEN DISPLAY WITH 125 FREE PROGRAMMABLE MEMORY LOCATIONS -CONSISTENT WORKPIECE INFEED HEIGHT BY ADJUSTMENT OF THE UPPER PART OF THE MACHINE -PLATE (900 MM) FOLDING, WITH ROLE -FINISH BRUSH SPOUT SIDE TECHNICAL DATA: WORKING WIDTH: 1350 MM WORKPIECE INFEED HEIGHT: 900 MM TAPE EXCHANGE PAGE LINKS WORKPIECE THICKNESS OF 3-160 MM BELT WIDTH: 1370 MM BELT LENGTH: 2150 MM OPERATING VOLTAGE: 400 V / 50 HZ DRIVE MOTOR UNIT: 15 KW DUST NOZZLE: 1 X DM 180 MM (UNIT 1) SUCTION CAPACITY: ABOUT 1,830 M ³/H
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 29.900 €
Ubicación: Land-weight approx.: 3000 kg<br/>dimensions (l x w x h) approx.: 6260 x 950 x 1750 mm<br/>gluing unit: yes <br/>profile scraping unit: yes <br/>description: <h3>brandt, type ambition 1660 fc airtech</h3> - spread milling unit 2 x 2.2 kw, 200 hz<br> - glue aggregate<br> - cutting unit phase / right 2 x 0.35 kw<br> - milling unit 2 x 0.55 kw counterflow<br> - forming mill unit 4 x 0.3 kw wd 60<br> - profile scraping with quick change heads<br> - cleaning unit 2 engines<br> - electronic control power control pc20 + - extension walk-in ruler with 300 mm<br> - pu rolls instead of standard rolls 1600 - 1800<br> - interior lighting hood 3 lamps<br> - workpiece support shear version<br> - interface ligmatech zhr05 for 1600/1800<br> - motor height adjustment top pressure<br> - program relocation walk-in ruler<br> - program displacement pressure zone<br> - quickmelt application unit<br> - automatic edge insertion kdx 1210/1400<br> - automation package for machines with 1 milling unit<br> - pneumatic adjustment hoods phase / straight<br> - pneumatic adjustment of face milling<br> - program adjustment lateral feeler rollers<br> - pneumatic 2-point vertical vertical feeler roller<br> - pneumatic 2-point adjustment<br> - tool set r = 2 mm<br> - glue scrapers<br> - powertouch 2<br> - airtec - activation unit at 15<br> WEIGHT APPROX.: 3000 KG
DIMENSIONS (L X W X H) APPROX.: 6260 X 950 X 1750 MM
GLUING UNIT: YES
PROFILE SCRAPING UNIT: YES
DESCRIPTION:

BRANDT, TYPE AMBITION 1660 FC AIRTECH

- SPREAD MILLING UNIT 2 X 2.2 KW, 200 HZ
- GLUE AGGREGATE
- CUTTING UNIT PHASE / RIGHT 2 X 0.35 KW
- MILLING UNIT 2 X 0.55 KW COUNTERFLOW
- FORMING MILL UNIT 4 X 0.3 KW WD 60
- PROFILE SCRAPING WITH QUICK CHANGE HEADS
- CLEANING UNIT 2 ENGINES
- ELECTRONIC CONTROL POWER CONTROL PC20 + - EXTENSION WALK-IN RULER WITH 300 MM
- PU ROLLS INSTEAD OF STANDARD ROLLS 1600 - 1800
- INTERIOR LIGHTING HOOD 3 LAMPS
- WORKPIECE SUPPORT SHEAR VERSION
- INTERFACE LIGMATECH ZHR05 FOR 1600/1800
- MOTOR HEIGHT ADJUSTMENT TOP PRESSURE
- PROGRAM RELOCATION WALK-IN RULER
- PROGRAM DISPLACEMENT PRESSURE ZONE
- QUICKMELT APPLICATION UNIT
- AUTOMATIC EDGE INSERTION KDX 1210/1400
- AUTOMATION PACKAGE FOR MACHINES WITH 1 MILLING UNIT
- PNEUMATIC ADJUSTMENT HOODS PHASE / STRAIGHT
- PNEUMATIC ADJUSTMENT OF FACE MILLING
- PROGRAM ADJUSTMENT LATERAL FEELER ROLLERS
- PNEUMATIC 2-POINT VERTICAL VERTICAL FEELER ROLLER
- PNEUMATIC 2-POINT ADJUSTMENT
- TOOL SET R = 2 MM
- GLUE SCRAPERS
- POWERTOUCH 2
- AIRTEC - ACTIVATION UNIT AT 15
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data:
-working height | 950 mm
-pneumatic connection | min. 6 bar
-total length | 4.770 mm

work piece and edge parameters:
-workpiece width min:
-at work-piece thickness 12-22 mm | 70 mm *.
-for panel thickness 23-40 mm | 120 mm *.
-at work-piece thickness 60-41 mm / 150 mm *.
* depending on the length of the workpiece
-workpiece overhang | 38 mm
-workpiece thickness. 8-60 mm
-edge height max. work piece height = | + 6 mm
-edge material role. 0.4-3 mm
-edge cross section max.
-for pvc. 135 mm â²
-for veneer | 100 mmâ²
-roll diameter max.        ⦠830 mm
-edge material strip | 0.4-8 mm
-edge cross section max.
-in strips. 360 mm â²
-if no radius is specified, is r = 2 mm
produced and delivered

overview of standard equipment:
gluing unit a8
end trimming unit chamfer/straight 2 x 0.18 kw
milling unit 2 x 0,55 kw counter running
contour trimming unit 1 x 0, 35 kw wd 40
profile scraper
schwabbelaggregat

amenities:
-feed variable 8-14 m / min - motor-driven height adjustment upper pressure
program adjustment compression zone
-quickmelt order unit
-automation package - 2 x multiple roles keying flush milling motor
-2 x special keying for scraper - glue joint scraper
-pu upper pressure rollers instead of rubber rollers
-interface electr. / mechan. zhr 01 /.
zhr 15
 TECHNICAL DATA: -WORKING HEIGHT | 950 MM -PNEUMATIC CONNECTION | MIN. 6 BAR -TOTAL LENGTH | 4.770 MM WORK PIECE AND EDGE PARAMETERS: -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM | 70 MM *. -FOR PANEL THICKNESS 23-40 MM | 120 MM *. -AT WORK-PIECE THICKNESS 60-41 MM / 150 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG | 38 MM -WORKPIECE THICKNESS. 8-60 MM -EDGE HEIGHT MAX. WORK PIECE HEIGHT = | + 6 MM -EDGE MATERIAL ROLE. 0.4-3 MM -EDGE CROSS SECTION MAX. -FOR PVC. 135 MM &ACIRC;&SUP2; -FOR VENEER | 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP | 0.4-8 MM -EDGE CROSS SECTION MAX. -IN STRIPS. 360 MM &ACIRC;&SUP2; -IF NO RADIUS IS SPECIFIED, IS R = 2 MM PRODUCED AND DELIVERED OVERVIEW OF STANDARD EQUIPMENT: GLUING UNIT A8 END TRIMMING UNIT CHAMFER/STRAIGHT 2 X 0.18 KW MILLING UNIT 2 X 0,55 KW COUNTER RUNNING CONTOUR TRIMMING UNIT 1 X 0, 35 KW WD 40 PROFILE SCRAPER SCHWABBELAGGREGAT AMENITIES: -FEED VARIABLE 8-14 M / MIN - MOTOR-DRIVEN HEIGHT ADJUSTMENT UPPER PRESSURE PROGRAM ADJUSTMENT COMPRESSION ZONE -QUICKMELT ORDER UNIT -AUTOMATION PACKAGE - 2 X MULTIPLE ROLES KEYING FLUSH MILLING MOTOR -2 X SPECIAL KEYING FOR SCRAPER - GLUE JOINT SCRAPER -PU UPPER PRESSURE ROLLERS INSTEAD OF RUBBER ROLLERS -INTERFACE ELECTR. / MECHAN. ZHR 01 /. ZHR 15
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 19.000 €
Ubicación: Land-weight approx.: 8000 kg<br/>dimensions (l x w x h) approx.: 2100 x 3700 x 2300 mm<br/>grinding band dimension: 1370 x 2620 mm<br/>description: machine number 0-412-20-1009, working width 1350 mm, grinding belt width 1370 mm, workpiece thickness 3-160 mm, feed rate 2.5-13 m / min<br> <br> head 1:<br> (r calibration unit) rubberized contact roller 85 ° shore 18.5 kw, sanding belt drive with electronic, wear-free brake, bvr belt blower <br> head 2: (r-calibration unit) rubberized contact roller 55 ° shore 15 kw, sanding belt drive with electronic, wear-free brake, bvr belt blower. m + g forward and reverse direction<br> <br> head 3:<br> (h-aggregate) sanding pad 18,5 kw, with internal lamellar band for holding a pressure beam, pneumatic pressure pad, activated by the workpiece, sanding insert 80 mm wide, hardness 0,55, sanding belt drive with electronic, wear-free brake, bvr belt blower<br> <br> head 4:<br> fbm finisch brush, 140 mm, extraction volume 1100 m³ / h WEIGHT APPROX.: 8000 KG
DIMENSIONS (L X W X H) APPROX.: 2100 X 3700 X 2300 MM
GRINDING BAND DIMENSION: 1370 X 2620 MM
DESCRIPTION: MACHINE NUMBER 0-412-20-1009, WORKING WIDTH 1350 MM, GRINDING BELT WIDTH 1370 MM, WORKPIECE THICKNESS 3-160 MM, FEED RATE 2.5-13 M / MIN

HEAD 1:
(R CALIBRATION UNIT) RUBBERIZED CONTACT ROLLER 85 ° SHORE 18.5 KW, SANDING BELT DRIVE WITH ELECTRONIC, WEAR-FREE BRAKE, BVR BELT BLOWER
HEAD 2: (R-CALIBRATION UNIT) RUBBERIZED CONTACT ROLLER 55 ° SHORE 15 KW, SANDING BELT DRIVE WITH ELECTRONIC, WEAR-FREE BRAKE, BVR BELT BLOWER. M + G FORWARD AND REVERSE DIRECTION

HEAD 3:
(H-AGGREGATE) SANDING PAD 18,5 KW, WITH INTERNAL LAMELLAR BAND FOR HOLDING A PRESSURE BEAM, PNEUMATIC PRESSURE PAD, ACTIVATED BY THE WORKPIECE, SANDING INSERT 80 MM WIDE, HARDNESS 0,55, SANDING BELT DRIVE WITH ELECTRONIC, WEAR-FREE BRAKE, BVR BELT BLOWER

HEAD 4:
FBM FINISCH BRUSH, 140 MM, EXTRACTION VOLUME 1100 M³ / H
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-single-sided machine to the fã¼gefrã¤sen straight workpiece edges, gluing and manipulating various edging materials from the reel or strip, up to 20 mm edge thickness, longitudinal and transverse flow.

fixed left stop page.

equipment:
-transport chain for transporting parts
-motorized height-adjustable top pressure - trimming unit with 2 motors 3 kw
-melting glue gluing part a20 (melting glue unit qa34) for rolls
up to 3 mm and strip material up to 20 mm
-automatic adjustment of compression zone
-trimming unit chamfer/straight
-workpiece support in a scissor version,
extendable approx. 1000 mm
-carriage for insertion of workpieces, right-angle fold-down
-chip channel in the machine base
-control nc 21
-automatic adjustment infeed fence
-anti-caking agent sprayer top/bottom
-automatic adjustment of hl81/83
to the elect. pneum.. convert a chamfer on straight and infinitely variable adjustment of the side caps stop to the chamfer caps with different thickness of edges.
-pneumatic adjustment caps motor side
-milling unit with pneum 1.5 kw. adjustment
-contour trimming unit fk 11 with autom. adjustment and interchangeable heads
-for plasters in direction profile with pneum. adjustment
-for plasters in direction joint with pneum. adjustment
-buffing unit up and down

technical data:
-feed infinitely variable 18 - 24 m / min.
-working height 950 mm
-minimum working width:
-55 mm workpiece thickness 22 mm
-100 mm workpiece thickness 60 mm
(depending on the length of the workpiece)
-workpiece projection 30 mm
-workpiece thickness 12-60 mm
-edge material strip max 0,4-20 mm
-edge cross-section strips up to 900 mm2 cross-section
-edge material role 0.3-3 mm
-max - pvc edge cross-section 135 mm2
-for veneer 100 mm2
-roll diameter of maximum 830 mm
-soil conditions must comply with the foundation plan SINGLE-SIDED MACHINE TO THE F&ATILDE;&FRAC14;GEFR&ATILDE;&CURREN;SEN STRAIGHT WORKPIECE EDGES, GLUING AND MANIPULATING VARIOUS EDGING MATERIALS FROM THE REEL OR STRIP, UP TO 20 MM EDGE THICKNESS, LONGITUDINAL AND TRANSVERSE FLOW. FIXED LEFT STOP PAGE. EQUIPMENT: -TRANSPORT CHAIN FOR TRANSPORTING PARTS -MOTORIZED HEIGHT-ADJUSTABLE TOP PRESSURE - TRIMMING UNIT WITH 2 MOTORS 3 KW -MELTING GLUE GLUING PART A20 (MELTING GLUE UNIT QA34) FOR ROLLS UP TO 3 MM AND STRIP MATERIAL UP TO 20 MM -AUTOMATIC ADJUSTMENT OF COMPRESSION ZONE -TRIMMING UNIT CHAMFER/STRAIGHT -WORKPIECE SUPPORT IN A SCISSOR VERSION, EXTENDABLE APPROX. 1000 MM -CARRIAGE FOR INSERTION OF WORKPIECES, RIGHT-ANGLE FOLD-DOWN -CHIP CHANNEL IN THE MACHINE BASE -CONTROL NC 21 -AUTOMATIC ADJUSTMENT INFEED FENCE -ANTI-CAKING AGENT SPRAYER TOP/BOTTOM -AUTOMATIC ADJUSTMENT OF HL81/83 TO THE ELECT. PNEUM.. CONVERT A CHAMFER ON STRAIGHT AND INFINITELY VARIABLE ADJUSTMENT OF THE SIDE CAPS STOP TO THE CHAMFER CAPS WITH DIFFERENT THICKNESS OF EDGES. -PNEUMATIC ADJUSTMENT CAPS MOTOR SIDE -MILLING UNIT WITH PNEUM 1.5 KW. ADJUSTMENT -CONTOUR TRIMMING UNIT FK 11 WITH AUTOM. ADJUSTMENT AND INTERCHANGEABLE HEADS -FOR PLASTERS IN DIRECTION PROFILE WITH PNEUM. ADJUSTMENT -FOR PLASTERS IN DIRECTION JOINT WITH PNEUM. ADJUSTMENT -BUFFING UNIT UP AND DOWN TECHNICAL DATA: -FEED INFINITELY VARIABLE 18 - 24 M / MIN. -WORKING HEIGHT 950 MM -MINIMUM WORKING WIDTH: -55 MM WORKPIECE THICKNESS 22 MM -100 MM WORKPIECE THICKNESS 60 MM (DEPENDING ON THE LENGTH OF THE WORKPIECE) -WORKPIECE PROJECTION 30 MM -WORKPIECE THICKNESS 12-60 MM -EDGE MATERIAL STRIP MAX 0,4-20 MM -EDGE CROSS-SECTION STRIPS UP TO 900 MM2 CROSS-SECTION -EDGE MATERIAL ROLE 0.3-3 MM -MAX - PVC EDGE CROSS-SECTION 135 MM2 -FOR VENEER 100 MM2 -ROLL DIAMETER OF MAXIMUM 830 MM -SOIL CONDITIONS MUST COMPLY WITH THE FOUNDATION PLAN
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-filter capacity: 15  hl/h<br />filter area: 4  m²<br />operating pressure: 6  bar<br />kieselguhr admission: 27  kg<br />power consumption: 2 kw<br />weight: 500  kg<br />operation / control:  simatic s7 sps with profinet interface for data exchange with plc<br />basic construction: cylindro horizontal filter, swiveling for emptying, standing on a frame<br />equipment: dosage unit and pre-coat-/beer pump, 2 electrical diaphragm seals (-1/+ 5 bar), 1 pt 100 (- 10/+ 150 °c), 1 inductive flow meter (0 – 30 hl/h)switchgear (vde compliant): brushed stainless steel switch box ip 54 with the frequency converters for the beer pump and the stirrer, 4 digital displays for the physical data in the control cabinet front<br /> FILTER CAPACITY: 15 HL/H
FILTER AREA: 4 M²
OPERATING PRESSURE: 6 BAR
KIESELGUHR ADMISSION: 27 KG
POWER CONSUMPTION: 2 KW
WEIGHT: 500 KG
OPERATION / CONTROL: SIMATIC S7 SPS WITH PROFINET INTERFACE FOR DATA EXCHANGE WITH PLC
BASIC CONSTRUCTION: CYLINDRO HORIZONTAL FILTER, SWIVELING FOR EMPTYING, STANDING ON A FRAME
EQUIPMENT: DOSAGE UNIT AND PRE-COAT-/BEER PUMP, 2 ELECTRICAL DIAPHRAGM SEALS (-1/+ 5 BAR), 1 PT 100 (- 10/+ 150 °C), 1 INDUCTIVE FLOW METER (0 – 30 HL/H)SWITCHGEAR (VDE COMPLIANT): BRUSHED STAINLESS STEEL SWITCH BOX IP 54 WITH THE FREQUENCY CONVERTERS FOR THE BEER PUMP AND THE STIRRER, 4 DIGITAL DISPLAYS FOR THE PHYSICAL DATA IN THE CONTROL CABINET FRONT
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-overview of aggregate loading:
-release agent spraying unit
-trimming unit
-gluing part a20 with 2 wheels
-trimming unit hl84
-milling unit
-contour trimming unit fk11 manual
-profile scraper pn10
-finish unit

1 base machine:
-feed ⦠18 - 25 m / min
-feed up with fk11 ⦠20 m / min
-working height ⦠950 mm
-pneumatic connection ⦠7-8 bar
-total length ⦠7755 mm

2. workpiece and kantenparmeter:
-workpiece width min:
-at work-piece thickness 12-22 mm ⦠60 mm *.
-for panel thickness 23-40 mm ⦠105 mm *.
* depending on the length of the workpiece
-workpiece overhang ⦠30 mm
-workpiece thickness ⦠12-40 mm
(workpiece thickness optional) ⦠8-60 mm
-edge material role ⦠0.3-3 mm
-edge cross section max: â¦
-for pvc ⦠135 mm â²
-for veneer ⦠100 mmâ²
-roll diameter max. ⦠830 mm
-edge material strip ⦠0.4-20 mm
-edge cross section max: â¦
-in strip ⦠900 mmâ²

3. aggregate loading:

3.1 release agent spraying unit top/bottom:

3.2 trimming unit:
-2 motors 3 kw, 150 hz., 9000 rpm
-electro-pneumatic control of both motors

3.3 a20 gluing unit with 2 roles:
consisting of:
workpiece preheating
quickmelt order unit
quick clamping system
magazine 2 roles manually
pressure zone c.

3.4 caps unit chamfer/straight hl84/0.8 kw:
-2 motors per 0.8 kw, 200 hz., 12000 rpm
-engines manually swiveling the chamfer caps

3.5 preliminary milling unit 1.5 kw:
-2 motors one above the other with x 1,5 kw, 200 hz.
and, 12000 1/min
-height with the upper pressure
-working in the opposite direction
-swivel range +/-1 degree

3.6 form milling aggregate fk 11 manual

i - change head kit manually adjustable
-2 exchange heads
-for manual adjustment on the different
edge thicknesses for chamfer milling or the
manual setup of chamfer milling on
radius milling
-maximum thickness of edges of chamfer radius tool:
-r 1.5 = 0.6 mm
-r 2.0 = 0.8 mm
-if r 3.0 = 1.0 mm
-chamfer angle 15 degrees

3.7 profile scraper pn10:
-to the chamfering or rounding of machined
pvc edge

3.8 finishaggregat, consisting of:
-glue joint scraper
-schwabbelaggregat

4. power control pc 22:

other accessories

carriage
folding for the rectangular insertion of workpieces at unilateral editing.
workpiece dimension 500 x 1600 mm

workpiece thickness 60 mm site. 40 mm
-preparation of the base machine and all
units up to the fã¼geaggregat! 
for workpiece thickness 60 mm
at reduced speed
up to 20 m / min.

workpiece thickness 8 mm
-preparation of the basic machine for
workpiece thickness of min. 8 mm instead of 12 mm
-only longitudinal processing without copying it corners
and possible without profile scraper
only for workpieces without top layer projection.

automation package chamfer/radius
-automatic adjustment infeed fence
-automatic adjustment of compression zone
-pneumatic adjustment of straigt on
straight line caps
-pneumatic adjustment of the cap motors
to flush - or ã?bestandskappen
-pneumatic adjustment before milling unit
to flush - or excess of jurisdiction milling
-automatic adjustment of straigt on
radius milling shape milling
-pneumatic adjustment pn10 and fa11
to the side driving away from the
workspace
-electronic height adjustment

workpiece management for fk device
with additional clamping workpiece length
min. 120 mm 
 OVERVIEW OF AGGREGATE LOADING: -RELEASE AGENT SPRAYING UNIT -TRIMMING UNIT -GLUING PART A20 WITH 2 WHEELS -TRIMMING UNIT HL84 -MILLING UNIT -CONTOUR TRIMMING UNIT FK11 MANUAL -PROFILE SCRAPER PN10 -FINISH UNIT 1 BASE MACHINE: -FEED &ACIRC;&BRVBAR; 18 - 25 M / MIN -FEED UP WITH FK11 &ACIRC;&BRVBAR; 20 M / MIN -WORKING HEIGHT &ACIRC;&BRVBAR; 950 MM -PNEUMATIC CONNECTION &ACIRC;&BRVBAR; 7-8 BAR -TOTAL LENGTH &ACIRC;&BRVBAR; 7755 MM 2. WORKPIECE AND KANTENPARMETER: -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM &ACIRC;&BRVBAR; 60 MM *. -FOR PANEL THICKNESS 23-40 MM &ACIRC;&BRVBAR; 105 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG &ACIRC;&BRVBAR; 30 MM -WORKPIECE THICKNESS &ACIRC;&BRVBAR; 12-40 MM (WORKPIECE THICKNESS OPTIONAL) &ACIRC;&BRVBAR; 8-60 MM -EDGE MATERIAL ROLE &ACIRC;&BRVBAR; 0.3-3 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -FOR PVC &ACIRC;&BRVBAR; 135 MM &ACIRC;&SUP2; -FOR VENEER &ACIRC;&BRVBAR; 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP &ACIRC;&BRVBAR; 0.4-20 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -IN STRIP &ACIRC;&BRVBAR; 900 MM&ACIRC;&SUP2; 3. AGGREGATE LOADING: 3.1 RELEASE AGENT SPRAYING UNIT TOP/BOTTOM: 3.2 TRIMMING UNIT: -2 MOTORS 3 KW, 150 HZ., 9000 RPM -ELECTRO-PNEUMATIC CONTROL OF BOTH MOTORS 3.3 A20 GLUING UNIT WITH 2 ROLES: CONSISTING OF: WORKPIECE PREHEATING QUICKMELT ORDER UNIT QUICK CLAMPING SYSTEM MAGAZINE 2 ROLES MANUALLY PRESSURE ZONE C. 3.4 CAPS UNIT CHAMFER/STRAIGHT HL84/0.8 KW: -2 MOTORS PER 0.8 KW, 200 HZ., 12000 RPM -ENGINES MANUALLY SWIVELING THE CHAMFER CAPS 3.5 PRELIMINARY MILLING UNIT 1.5 KW: -2 MOTORS ONE ABOVE THE OTHER WITH X 1,5 KW, 200 HZ. AND, 12000 1/MIN -HEIGHT WITH THE UPPER PRESSURE -WORKING IN THE OPPOSITE DIRECTION -SWIVEL RANGE +/-1 DEGREE 3.6 FORM MILLING AGGREGATE FK 11 MANUAL I - CHANGE HEAD KIT MANUALLY ADJUSTABLE -2 EXCHANGE HEADS -FOR MANUAL ADJUSTMENT ON THE DIFFERENT EDGE THICKNESSES FOR CHAMFER MILLING OR THE MANUAL SETUP OF CHAMFER MILLING ON RADIUS MILLING -MAXIMUM THICKNESS OF EDGES OF CHAMFER RADIUS TOOL: -R 1.5 = 0.6 MM -R 2.0 = 0.8 MM -IF R 3.0 = 1.0 MM -CHAMFER ANGLE 15 DEGREES 3.7 PROFILE SCRAPER PN10: -TO THE CHAMFERING OR ROUNDING OF MACHINED PVC EDGE 3.8 FINISHAGGREGAT, CONSISTING OF: -GLUE JOINT SCRAPER -SCHWABBELAGGREGAT 4. POWER CONTROL PC 22: OTHER ACCESSORIES CARRIAGE FOLDING FOR THE RECTANGULAR INSERTION OF WORKPIECES AT UNILATERAL EDITING. WORKPIECE DIMENSION 500 X 1600 MM WORKPIECE THICKNESS 60 MM SITE. 40 MM -PREPARATION OF THE BASE MACHINE AND ALL UNITS UP TO THE F&ATILDE;&FRAC14;GEAGGREGAT! FOR WORKPIECE THICKNESS 60 MM AT REDUCED SPEED UP TO 20 M / MIN. WORKPIECE THICKNESS 8 MM -PREPARATION OF THE BASIC MACHINE FOR WORKPIECE THICKNESS OF MIN. 8 MM INSTEAD OF 12 MM -ONLY LONGITUDINAL PROCESSING WITHOUT COPYING IT CORNERS AND POSSIBLE WITHOUT PROFILE SCRAPER ONLY FOR WORKPIECES WITHOUT TOP LAYER PROJECTION. AUTOMATION PACKAGE CHAMFER/RADIUS -AUTOMATIC ADJUSTMENT INFEED FENCE -AUTOMATIC ADJUSTMENT OF COMPRESSION ZONE -PNEUMATIC ADJUSTMENT OF STRAIGT ON STRAIGHT LINE CAPS -PNEUMATIC ADJUSTMENT OF THE CAP MOTORS TO FLUSH - OR &ATILDE;?BESTANDSKAPPEN -PNEUMATIC ADJUSTMENT BEFORE MILLING UNIT TO FLUSH - OR EXCESS OF JURISDICTION MILLING -AUTOMATIC ADJUSTMENT OF STRAIGT ON RADIUS MILLING SHAPE MILLING -PNEUMATIC ADJUSTMENT PN10 AND FA11 TO THE SIDE DRIVING AWAY FROM THE WORKSPACE -ELECTRONIC HEIGHT ADJUSTMENT WORKPIECE MANAGEMENT FOR FK DEVICE WITH ADDITIONAL CLAMPING WORKPIECE LENGTH MIN. 120 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 9000 x 5000 x 1500 mm<br/>description: cutting center ks za-rks650<br> pc controlled<br> <br>  <b>as good as new, run for approx. 20 h due to change in production<br></b><br>  <b>new price 95.000 ?</b><br> <br> automatic saw tilting device<br> swivel wheel: up to 20°<br> automatic feeding table in connection with the saw<br> profile sizes 175, 210, 235 mm<br> cutting length: 4500 mm<br> profile sizes 6500 mm<br> automatic label setting device<br> cab applicator a 1000 label printer<br> pressure vessel 40 liters 11 bar,<br> incl.holzmann abs 3000/5000<br> extraction unit 5 m³ (machine control)<br> WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 9000 X 5000 X 1500 MM
DESCRIPTION: CUTTING CENTER KS ZA-RKS650
PC CONTROLLED

AS GOOD AS NEW, RUN FOR APPROX. 20 H DUE TO CHANGE IN PRODUCTION

NEW PRICE 95.000 ?

AUTOMATIC SAW TILTING DEVICE
SWIVEL WHEEL: UP TO 20°
AUTOMATIC FEEDING TABLE IN CONNECTION WITH THE SAW
PROFILE SIZES 175, 210, 235 MM
CUTTING LENGTH: 4500 MM
PROFILE SIZES 6500 MM
AUTOMATIC LABEL SETTING DEVICE
CAB APPLICATOR A 1000 LABEL PRINTER
PRESSURE VESSEL 40 LITERS 11 BAR,
INCL.HOLZMANN ABS 3000/5000
EXTRACTION UNIT 5 M³ (MACHINE CONTROL)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-overview of aggregate loading:
-release agent spraying unit
-trimming unit
-gluing part a20 with 2 wheels
-trimming unit hl84
-milling unit
-contour trimming unit fk 11 manual
-profile scraper pn10
-profile scraper pn10
-finish unit

1 base machine:
-feed ⦠18 - 25 m / min
-feed up with fk13 ⦠20 m / min
-working height ⦠950 mm
-pneumatic connection ⦠7-8 bar
-total length ⦠8545 mm

2. workpiece and kantenparmeter:
-workpiece width min:
-at work-piece thickness 12-22 mm ⦠60 mm *.
-for panel thickness 23-40 mm ⦠105 mm *.
* depending on the length of the workpiece
-workpiece overhang ⦠30 mm
-workpiece thickness ⦠12-40 mm
(workpiece thickness optional) ⦠8-60 mm
-edge material role ⦠0.3-3 mm
-edge cross section max: â¦
-for pvc ⦠135 mm â²
-for veneer ⦠100 mmâ²
-roll diameter max. ⦠830 mm
-edge material strip ⦠0.4-20 mm
-edge cross section max: â¦
-in strip ⦠900 mmâ²

3. aggregate loading:

3.1 release agent spraying unit top/bottom

3.2 trimming unit:
-2 motors 3 kw, 150 hz., 9000 rpm
-electro-pneumatic control of both motors

3.3 a20 gluing unit with 2 roles:
consisting of:
workpiece preheating
quickmelt order unit
quick clamping system
magazine 2 roles manually
pressure zone c.
-order unit with fine fluting-

3.4 caps unit chamfer/straight hl84/0.8 kw:
-2 motors per 0.8 kw, 200 hz., 12000 rpm
-engines manually swiveling the chamfer caps

3.5 preliminary milling unit 1.5 kw:
-2 motors one above the other with x 1,5 kw, 200 hz.
and, 12000 1/min
-height with the upper pressure
-working in the opposite direction
-swivel range +/-1 degree

3.6 form milling aggregate fk 11 manual
the following tools was included with delivery:
-i change head set, autom. adjustable - i india radius cutter set for fk r = 2 mm 3.7 profile scraper pn10:
-to the chamfering or rounding of machined
pvc edges, with quick change heads

3.8 profile scraper pn10:
-to the chamfering or rounding of machined
pvc edges, with quick change heads

3.9 finishaggregat, consisting of:
-glue joint scraper
-schwabbelaggregat

4. power control pc 22:

change:
-customized exhaust hoods, so that higher edge overhangs can be driven. example: 25mm 16 mm panel thickness edge height (or 23 mm / 33 mm)

other accessories

workpiece thickness 60 mm site. 40 mm
-preparation of the base machine and all
units up to the fã¼geaggregat! 
for workpiece thickness 60 mm
at reduced speed
up to 20 m / min.

workpiece thickness 8 mm
-preparation of the basic machine for
workpiece thickness of min. 8 mm instead of 12 mm
-only longitudinal processing without copying it corners
and possible without profile scraper
only for workpieces without top layer projection.

workpiece support in scissor design
-with roll coating, max. 1000 mm extendable

remote control for ambition

automation package chamfer/radius
-automatic adjustment infeed fence
-automatic adjustment of compression zone
-pneumatic adjustment before milling unit to flush - or excess of jurisdiction milling
-multi scraper mn21 automatically instead of
2xpn10, to automatically convert different radius or chamfer
-electronic height adjustment

detergent spray unit top/bottom
 OVERVIEW OF AGGREGATE LOADING: -RELEASE AGENT SPRAYING UNIT -TRIMMING UNIT -GLUING PART A20 WITH 2 WHEELS -TRIMMING UNIT HL84 -MILLING UNIT -CONTOUR TRIMMING UNIT FK 11 MANUAL -PROFILE SCRAPER PN10 -PROFILE SCRAPER PN10 -FINISH UNIT 1 BASE MACHINE: -FEED &ACIRC;&BRVBAR; 18 - 25 M / MIN -FEED UP WITH FK13 &ACIRC;&BRVBAR; 20 M / MIN -WORKING HEIGHT &ACIRC;&BRVBAR; 950 MM -PNEUMATIC CONNECTION &ACIRC;&BRVBAR; 7-8 BAR -TOTAL LENGTH &ACIRC;&BRVBAR; 8545 MM 2. WORKPIECE AND KANTENPARMETER: -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM &ACIRC;&BRVBAR; 60 MM *. -FOR PANEL THICKNESS 23-40 MM &ACIRC;&BRVBAR; 105 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG &ACIRC;&BRVBAR; 30 MM -WORKPIECE THICKNESS &ACIRC;&BRVBAR; 12-40 MM (WORKPIECE THICKNESS OPTIONAL) &ACIRC;&BRVBAR; 8-60 MM -EDGE MATERIAL ROLE &ACIRC;&BRVBAR; 0.3-3 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -FOR PVC &ACIRC;&BRVBAR; 135 MM &ACIRC;&SUP2; -FOR VENEER &ACIRC;&BRVBAR; 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP &ACIRC;&BRVBAR; 0.4-20 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -IN STRIP &ACIRC;&BRVBAR; 900 MM&ACIRC;&SUP2; 3. AGGREGATE LOADING: 3.1 RELEASE AGENT SPRAYING UNIT TOP/BOTTOM 3.2 TRIMMING UNIT: -2 MOTORS 3 KW, 150 HZ., 9000 RPM -ELECTRO-PNEUMATIC CONTROL OF BOTH MOTORS 3.3 A20 GLUING UNIT WITH 2 ROLES: CONSISTING OF: WORKPIECE PREHEATING QUICKMELT ORDER UNIT QUICK CLAMPING SYSTEM MAGAZINE 2 ROLES MANUALLY PRESSURE ZONE C. -ORDER UNIT WITH FINE FLUTING- 3.4 CAPS UNIT CHAMFER/STRAIGHT HL84/0.8 KW: -2 MOTORS PER 0.8 KW, 200 HZ., 12000 RPM -ENGINES MANUALLY SWIVELING THE CHAMFER CAPS 3.5 PRELIMINARY MILLING UNIT 1.5 KW: -2 MOTORS ONE ABOVE THE OTHER WITH X 1,5 KW, 200 HZ. AND, 12000 1/MIN -HEIGHT WITH THE UPPER PRESSURE -WORKING IN THE OPPOSITE DIRECTION -SWIVEL RANGE +/-1 DEGREE 3.6 FORM MILLING AGGREGATE FK 11 MANUAL THE FOLLOWING TOOLS WAS INCLUDED WITH DELIVERY: -I CHANGE HEAD SET, AUTOM. ADJUSTABLE - I INDIA RADIUS CUTTER SET FOR FK R = 2 MM 3.7 PROFILE SCRAPER PN10: -TO THE CHAMFERING OR ROUNDING OF MACHINED PVC EDGES, WITH QUICK CHANGE HEADS 3.8 PROFILE SCRAPER PN10: -TO THE CHAMFERING OR ROUNDING OF MACHINED PVC EDGES, WITH QUICK CHANGE HEADS 3.9 FINISHAGGREGAT, CONSISTING OF: -GLUE JOINT SCRAPER -SCHWABBELAGGREGAT 4. POWER CONTROL PC 22: CHANGE: -CUSTOMIZED EXHAUST HOODS, SO THAT HIGHER EDGE OVERHANGS CAN BE DRIVEN. EXAMPLE: 25MM 16 MM PANEL THICKNESS EDGE HEIGHT (OR 23 MM / 33 MM) OTHER ACCESSORIES WORKPIECE THICKNESS 60 MM SITE. 40 MM -PREPARATION OF THE BASE MACHINE AND ALL UNITS UP TO THE F&ATILDE;&FRAC14;GEAGGREGAT! FOR WORKPIECE THICKNESS 60 MM AT REDUCED SPEED UP TO 20 M / MIN. WORKPIECE THICKNESS 8 MM -PREPARATION OF THE BASIC MACHINE FOR WORKPIECE THICKNESS OF MIN. 8 MM INSTEAD OF 12 MM -ONLY LONGITUDINAL PROCESSING WITHOUT COPYING IT CORNERS AND POSSIBLE WITHOUT PROFILE SCRAPER ONLY FOR WORKPIECES WITHOUT TOP LAYER PROJECTION. WORKPIECE SUPPORT IN SCISSOR DESIGN -WITH ROLL COATING, MAX. 1000 MM EXTENDABLE REMOTE CONTROL FOR AMBITION AUTOMATION PACKAGE CHAMFER/RADIUS -AUTOMATIC ADJUSTMENT INFEED FENCE -AUTOMATIC ADJUSTMENT OF COMPRESSION ZONE -PNEUMATIC ADJUSTMENT BEFORE MILLING UNIT TO FLUSH - OR EXCESS OF JURISDICTION MILLING -MULTI SCRAPER MN21 AUTOMATICALLY INSTEAD OF 2XPN10, TO AUTOMATICALLY CONVERT DIFFERENT RADIUS OR CHAMFER -ELECTRONIC HEIGHT ADJUSTMENT DETERGENT SPRAY UNIT TOP/BOTTOM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 600 kg<br/>dimensions (l x w x h) approx.: 2800 x 1300 x 1700 mm<br/>description: with cutting group<br> with threading / drilling group<br> with locking press<br> cutting group engine power 3 kw<br> drilling group engine power 2.2 kw<br> with hydraulic power pack<br> see photos<br> this article is intended for sale outside eu WEIGHT APPROX.: 600 KG
DIMENSIONS (L X W X H) APPROX.: 2800 X 1300 X 1700 MM
DESCRIPTION: WITH CUTTING GROUP
WITH THREADING / DRILLING GROUP
WITH LOCKING PRESS
CUTTING GROUP ENGINE POWER 3 KW
DRILLING GROUP ENGINE POWER 2.2 KW
WITH HYDRAULIC POWER PACK
SEE PHOTOS
THIS ARTICLE IS INTENDED FOR SALE OUTSIDE EU
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-facilities
-hot melt glue gluing part a20 for rolls
up to 3 mm and strip material up to 20 mm
-hl83 facet/straight unit
-extension running 500 mm
-workpiece support in a scissor version,
extendable up to 1000 mm
-autom. adjustment of the pressure zone
-pneum.. adjustment cap motor
-pneum.. adjustment of chamfer/straight
-milling unit 1.5 kw
-pneum.. adjustment before milling unit
-contour trimming unit fk 11 manual
i-wechelkopfsatz for profile milling
slide bevel cutter set for fk11 20 degrees (1st movement)
slide radius cutter set for fk11 r2 (2nd movement)
-for plasters in direction profile
-pneum.. adjustment for cleaning
-for plasters in direction glue joint
-use control glue grout scraper
-buffing unit up and down
-electr. height adjustment

technical data:
-feed infinitely variable 18 - 24 m / min.
-working height 950 mm
-minimum working width:
-55 mm workpiece thickness 22 mm
-100 mm workpiece thickness 60 mm
(depending on the length of the workpiece)
-workpiece projection 30 mm
-workpiece thickness 12-60 mm
-edge material strip max 0,4-20 mm
-edge cross-section strips up to 900 mm2 cross-section
-edge material role 0.3-3 mm
-max - pvc edge cross-section 135 mm2
-for veneer 100 mm2
-roll diameter of maximum 830 mm
-pneumatic connection 7-8 bar FACILITIES -HOT MELT GLUE GLUING PART A20 FOR ROLLS UP TO 3 MM AND STRIP MATERIAL UP TO 20 MM -HL83 FACET/STRAIGHT UNIT -EXTENSION RUNNING 500 MM -WORKPIECE SUPPORT IN A SCISSOR VERSION, EXTENDABLE UP TO 1000 MM -AUTOM. ADJUSTMENT OF THE PRESSURE ZONE -PNEUM.. ADJUSTMENT CAP MOTOR -PNEUM.. ADJUSTMENT OF CHAMFER/STRAIGHT -MILLING UNIT 1.5 KW -PNEUM.. ADJUSTMENT BEFORE MILLING UNIT -CONTOUR TRIMMING UNIT FK 11 MANUAL I-WECHELKOPFSATZ FOR PROFILE MILLING SLIDE BEVEL CUTTER SET FOR FK11 20 DEGREES (1ST MOVEMENT) SLIDE RADIUS CUTTER SET FOR FK11 R2 (2ND MOVEMENT) -FOR PLASTERS IN DIRECTION PROFILE -PNEUM.. ADJUSTMENT FOR CLEANING -FOR PLASTERS IN DIRECTION GLUE JOINT -USE CONTROL GLUE GROUT SCRAPER -BUFFING UNIT UP AND DOWN -ELECTR. HEIGHT ADJUSTMENT TECHNICAL DATA: -FEED INFINITELY VARIABLE 18 - 24 M / MIN. -WORKING HEIGHT 950 MM -MINIMUM WORKING WIDTH: -55 MM WORKPIECE THICKNESS 22 MM -100 MM WORKPIECE THICKNESS 60 MM (DEPENDING ON THE LENGTH OF THE WORKPIECE) -WORKPIECE PROJECTION 30 MM -WORKPIECE THICKNESS 12-60 MM -EDGE MATERIAL STRIP MAX 0,4-20 MM -EDGE CROSS-SECTION STRIPS UP TO 900 MM2 CROSS-SECTION -EDGE MATERIAL ROLE 0.3-3 MM -MAX - PVC EDGE CROSS-SECTION 135 MM2 -FOR VENEER 100 MM2 -ROLL DIAMETER OF MAXIMUM 830 MM -PNEUMATIC CONNECTION 7-8 BAR
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 3500 kg<br/>dimensions (l x w x h) approx.: 5450 x 1000 x 1500 mm<br/>description: edgebander, edge banding machine<br> edge thickness from 0.4 up to 30 mm<br> worpiece thickness from 10 mm up to 60 mm<br> feed motor 1.50 kw<br> edge magazine for 1 edge roller<br> gluing unit<br> pressure group with (1+3) rollers<br> snipping unit, 2 motors<br> fine trimming unit, 2 x motor 2.20 kw-12000 rpm<br> profile scraper unit WEIGHT APPROX.: 3500 KG
DIMENSIONS (L X W X H) APPROX.: 5450 X 1000 X 1500 MM
DESCRIPTION: EDGEBANDER, EDGE BANDING MACHINE
EDGE THICKNESS FROM 0.4 UP TO 30 MM
WORPIECE THICKNESS FROM 10 MM UP TO 60 MM
FEED MOTOR 1.50 KW
EDGE MAGAZINE FOR 1 EDGE ROLLER
GLUING UNIT
PRESSURE GROUP WITH (1+3) ROLLERS
SNIPPING UNIT, 2 MOTORS
FINE TRIMMING UNIT, 2 X MOTOR 2.20 KW-12000 RPM
PROFILE SCRAPER UNIT
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-facilities:
-quickmelt gluing unit, glue specifying finely dosed glue role (either equal to or gegenlauf)
-auto. edge magazine rolls and lengths
-reinforced before cap scissors
-heavy pressure zone with main roller (pneumatic pressurizes) and 3 reprinted roles, including program adjustment
-motor adjustable - and height-adjustable top pressure
-electronic controller pc 20 +
-modem for remote service/maintenance
-noise control panel
-hood interior lighting
-infeed fence extended about adjustable program, and around 300 mm
-auto. edge feeder
-release indication workpiece
-trimming unit of 2 x 2, 2 kw, 200 hz, - auto-package ii for 2 fraes-machines
-chamfer/straight, with pneum unit. 
2-point adjustment
-milling unit 2 x 0,55 kw 0 degrees
-milling unit 2 x 0, 55 kw synchronous operation, program adjustment on edge thickness
-contour trimming unit up + down arrow 2 x 0, 35 kw
-scraping unit (chamfer/rounding) with quick change heads
-surface scraper (joint)
-detergent specifying workpiece
-buffing unit, 2 engines

technical data (basic machine):
edge thickness 0.4-12 mm
roll away 3 x 45 mm
or 0.8 x 65 mm
workpiece thickness 8-60 mm
feed variable 8 - 16 m / min.
(*) when you select the form thrower takes place
automatic switching to 11 m / min.
electric 400 v - 3 ph - 50 hz.
pneumatic connection of min. 6 bar
connected load approx. 15,5 kw
total length 6,360 mm
 FACILITIES: -QUICKMELT GLUING UNIT, GLUE SPECIFYING FINELY DOSED GLUE ROLE (EITHER EQUAL TO OR GEGENLAUF) -AUTO. EDGE MAGAZINE ROLLS AND LENGTHS -REINFORCED BEFORE CAP SCISSORS -HEAVY PRESSURE ZONE WITH MAIN ROLLER (PNEUMATIC PRESSURIZES) AND 3 REPRINTED ROLES, INCLUDING PROGRAM ADJUSTMENT -MOTOR ADJUSTABLE - AND HEIGHT-ADJUSTABLE TOP PRESSURE -ELECTRONIC CONTROLLER PC 20 + -MODEM FOR REMOTE SERVICE/MAINTENANCE -NOISE CONTROL PANEL -HOOD INTERIOR LIGHTING -INFEED FENCE EXTENDED ABOUT ADJUSTABLE PROGRAM, AND AROUND 300 MM -AUTO. EDGE FEEDER -RELEASE INDICATION WORKPIECE -TRIMMING UNIT OF 2 X 2, 2 KW, 200 HZ, - AUTO-PACKAGE II FOR 2 FRAES-MACHINES -CHAMFER/STRAIGHT, WITH PNEUM UNIT. 2-POINT ADJUSTMENT -MILLING UNIT 2 X 0,55 KW 0 DEGREES -MILLING UNIT 2 X 0, 55 KW SYNCHRONOUS OPERATION, PROGRAM ADJUSTMENT ON EDGE THICKNESS -CONTOUR TRIMMING UNIT UP + DOWN ARROW 2 X 0, 35 KW -SCRAPING UNIT (CHAMFER/ROUNDING) WITH QUICK CHANGE HEADS -SURFACE SCRAPER (JOINT) -DETERGENT SPECIFYING WORKPIECE -BUFFING UNIT, 2 ENGINES TECHNICAL DATA (BASIC MACHINE): EDGE THICKNESS 0.4-12 MM ROLL AWAY 3 X 45 MM OR 0.8 X 65 MM WORKPIECE THICKNESS 8-60 MM FEED VARIABLE 8 - 16 M / MIN. (*) WHEN YOU SELECT THE FORM THROWER TAKES PLACE AUTOMATIC SWITCHING TO 11 M / MIN. ELECTRIC 400 V - 3 PH - 50 HZ. PNEUMATIC CONNECTION OF MIN. 6 BAR CONNECTED LOAD APPROX. 15,5 KW TOTAL LENGTH 6,360 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 11.400 €
Ubicación: Land-weight approx.: 3000 kg<br/>dimensions (l x w x h) approx.: 6750 x 1200 x 2100 mm<br/>description: max. panel height 60 mm, pressure with idle wheels, no. panel sizing / milling units 1 unit pre-milling unit, edge coil magazine, premelter for polyurethane glue nordson mc series, no. edge processing units 7 processing unit end trimming unit, processing unit fine trimming unit to trim and round, processing unit fine trimming unit to trim and round, processing unit corner rounding unit, processing unit edge scraping unit, processing unit glue scraping unit, processing unit buffing unit, control system power control pc 20, safety standard ce mark WEIGHT APPROX.: 3000 KG
DIMENSIONS (L X W X H) APPROX.: 6750 X 1200 X 2100 MM
DESCRIPTION: MAX. PANEL HEIGHT 60 MM, PRESSURE WITH IDLE WHEELS, NO. PANEL SIZING / MILLING UNITS 1 UNIT PRE-MILLING UNIT, EDGE COIL MAGAZINE, PREMELTER FOR POLYURETHANE GLUE NORDSON MC SERIES, NO. EDGE PROCESSING UNITS 7 PROCESSING UNIT END TRIMMING UNIT, PROCESSING UNIT FINE TRIMMING UNIT TO TRIM AND ROUND, PROCESSING UNIT FINE TRIMMING UNIT TO TRIM AND ROUND, PROCESSING UNIT CORNER ROUNDING UNIT, PROCESSING UNIT EDGE SCRAPING UNIT, PROCESSING UNIT GLUE SCRAPING UNIT, PROCESSING UNIT BUFFING UNIT, CONTROL SYSTEM POWER CONTROL PC 20, SAFETY STANDARD CE MARK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data:

-flat steel scissor cuts flat up to 100 x 18 mm
-blade length approx.						  250 mm
-shear cut angle
o 90 â° to 100 x 10 mm
-45 â° up to 70 x 8 mm
	-rod steel scissors 90 â° cuts steel up to 36 mm
	-square steel 90 â° up to 30 mm
-notching device plates up to 8 mm
	-hole punch - pressure power approx.				    50 t
				-throat depth 350 mm
				-punches in steel up to 20 mm ã? 15 mm
	-400 v / 3 kw
	-space requirement approx.			b h 1100 x 1700 x 2300 mm
	-weight approx.						1900 kg
 TECHNICAL DATA: -FLAT STEEL SCISSOR CUTS FLAT UP TO 100 X 18 MM -BLADE LENGTH APPROX. 250 MM -SHEAR CUT ANGLE O 90 &ACIRC;&DEG; TO 100 X 10 MM -45 &ACIRC;&DEG; UP TO 70 X 8 MM -ROD STEEL SCISSORS 90 &ACIRC;&DEG; CUTS STEEL UP TO 36 MM -SQUARE STEEL 90 &ACIRC;&DEG; UP TO 30 MM -NOTCHING DEVICE PLATES UP TO 8 MM -HOLE PUNCH - PRESSURE POWER APPROX. 50 T -THROAT DEPTH 350 MM -PUNCHES IN STEEL UP TO 20 MM &ATILDE;? 15 MM -400 V / 3 KW -SPACE REQUIREMENT APPROX. B H 1100 X 1700 X 2300 MM -WEIGHT APPROX. 1900 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 2.400 €
Ubicación: Land-weight approx.: 14000 kg<br/>dimensions (l x w x h) approx.: 7800 x 12000 x 2050 mm<br/>description: edge thickness: min. 0.4 mm - max. 30 mm, workpiece thickness: min 8 mm - max. 60 mm, workpiece width min. 235 mm, maximum workpiece width approx. 3000 mm, total power: 115 kw, consisting in: 1 x squaring-edging combined machine ecr-216/72-uk9: double-end tenoner for squaring of pieces up to 3000 mm long, with 2 joint trimming units in each side, unilateral edgebander working the pieces for its left side with the following aggregates: gluing unit, edge magazine for 1 edge roller, pressure group with (1+3) rollers, snipping unit, fine trimming unit: 2 x 1.50 kw, profile trimming unit, profile scraper unit, spraying unit, edge buffing unit, 1 x driven roller conveyor 5600 mm long and roller width 2700 mm, 1 x unilateral edgebander uk-9c alu with the following aggregates: gluing unit, edge magazine for 1 edge roller, pressure group with (1+3) rollers, snipping unit, fine trimming unit: 2 x 1.50 kw, profile trimming unit, profile scraper unit, 1 x machine with a edge buffing group WEIGHT APPROX.: 14000 KG
DIMENSIONS (L X W X H) APPROX.: 7800 X 12000 X 2050 MM
DESCRIPTION: EDGE THICKNESS: MIN. 0.4 MM - MAX. 30 MM, WORKPIECE THICKNESS: MIN 8 MM - MAX. 60 MM, WORKPIECE WIDTH MIN. 235 MM, MAXIMUM WORKPIECE WIDTH APPROX. 3000 MM, TOTAL POWER: 115 KW, CONSISTING IN: 1 X SQUARING-EDGING COMBINED MACHINE ECR-216/72-UK9: DOUBLE-END TENONER FOR SQUARING OF PIECES UP TO 3000 MM LONG, WITH 2 JOINT TRIMMING UNITS IN EACH SIDE, UNILATERAL EDGEBANDER WORKING THE PIECES FOR ITS LEFT SIDE WITH THE FOLLOWING AGGREGATES: GLUING UNIT, EDGE MAGAZINE FOR 1 EDGE ROLLER, PRESSURE GROUP WITH (1+3) ROLLERS, SNIPPING UNIT, FINE TRIMMING UNIT: 2 X 1.50 KW, PROFILE TRIMMING UNIT, PROFILE SCRAPER UNIT, SPRAYING UNIT, EDGE BUFFING UNIT, 1 X DRIVEN ROLLER CONVEYOR 5600 MM LONG AND ROLLER WIDTH 2700 MM, 1 X UNILATERAL EDGEBANDER UK-9C ALU WITH THE FOLLOWING AGGREGATES: GLUING UNIT, EDGE MAGAZINE FOR 1 EDGE ROLLER, PRESSURE GROUP WITH (1+3) ROLLERS, SNIPPING UNIT, FINE TRIMMING UNIT: 2 X 1.50 KW, PROFILE TRIMMING UNIT, PROFILE SCRAPER UNIT, 1 X MACHINE WITH A EDGE BUFFING GROUP
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-planing plant of ledinek superles 400 6v + 4f s80 with mechanization

used planing plant of ledinek superles entstapellung multiple caps saw and stappelmechanisirung kallfass

manufacturer: ledinek
year of construction: 2004
type: superles 400 6v + 4f-s80
condition: good, ready to use, can be visited
location: de
availability: immediately

technical data:

working dimensions:
working width: 70-400 mm
working thickness: 19-300 mm
working length: min. 2.000 mm
table height: 1000 mm
feed speed: 20-80 m / min.
* ruler is 8 mm on the feed rollers. clamping length of min. 120 mm.

drive motors
dressing shaft: 37 kw
thickness wave: 45 kw
vertical shaft left: 30 kw
vertical shaft right: 37 kw
chamfer 4 x 3 kw 12 kw
profiling shafts 2 x 30 kw 60 kw
feed: 30 kw
hub gear motor: 2.2 kw
total installed power: 262kw
all spindle with engine brake

tools:
the horizontal shaft speed: 5.000 rpm
the vertical spindle speed: 5,500 rpm
speed of roll forming waves: 6.000 rpm
chamfer mills: 9.000 rpm
vertical spindle diameter: 50 mm
tool clamping length: 150 mm

diameter of tools:
horizontal shaft: 205 mm
vertical spindle: 160-225 mm
joint diameter: 200-205 mm
profile shaft spindle 140-300 (50) mm
chamfer mills 140 / 45â° x10mm

tension decrease normally (with full working width)
dressing shaft max.: 10 mm (4 mm)
thickness shaft max.: 16 mm (5 mm)
vertical shaft left max: 16 mm (5 mm)
vertical shaft right max: 10 mm (5 mm)
chamfer size max: 6 mm / 45â°

operating voltage 400 v / 50 hz
instalierte power: 262 kw
compressed air: 6 bar
pneumatic component: festo
control cabinet according to vde,
component: siemens, klã¶ckner-mã¶ller, telemecanique

soundproof cabin of lighting, window with double glazed windows,
noise reduction about 15db
service crane in the cabin
tool grinding machine is sold

operator panel
with simatic op77b operation panel and all operator buttons. free-standing.

dust nozzle:
horizontal: 1 x 200mm, 1 x 250mm
vertical: 4 x 200mm
chamfer mills 4 x 80 mm
extraction speed: min 30 m / s

weight: 19000 kg

price on request PLANING PLANT OF LEDINEK SUPERLES 400 6V + 4F S80 WITH MECHANIZATION USED PLANING PLANT OF LEDINEK SUPERLES ENTSTAPELLUNG MULTIPLE CAPS SAW AND STAPPELMECHANISIRUNG KALLFASS MANUFACTURER: LEDINEK YEAR OF CONSTRUCTION: 2004 TYPE: SUPERLES 400 6V + 4F-S80 CONDITION: GOOD, READY TO USE, CAN BE VISITED LOCATION: DE AVAILABILITY: IMMEDIATELY TECHNICAL DATA: WORKING DIMENSIONS: WORKING WIDTH: 70-400 MM WORKING THICKNESS: 19-300 MM WORKING LENGTH: MIN. 2.000 MM TABLE HEIGHT: 1000 MM FEED SPEED: 20-80 M / MIN. * RULER IS 8 MM ON THE FEED ROLLERS. CLAMPING LENGTH OF MIN. 120 MM. DRIVE MOTORS DRESSING SHAFT: 37 KW THICKNESS WAVE: 45 KW VERTICAL SHAFT LEFT: 30 KW VERTICAL SHAFT RIGHT: 37 KW CHAMFER 4 X 3 KW 12 KW PROFILING SHAFTS 2 X 30 KW 60 KW FEED: 30 KW HUB GEAR MOTOR: 2.2 KW TOTAL INSTALLED POWER: 262KW ALL SPINDLE WITH ENGINE BRAKE TOOLS: THE HORIZONTAL SHAFT SPEED: 5.000 RPM THE VERTICAL SPINDLE SPEED: 5,500 RPM SPEED OF ROLL FORMING WAVES: 6.000 RPM CHAMFER MILLS: 9.000 RPM VERTICAL SPINDLE DIAMETER: 50 MM TOOL CLAMPING LENGTH: 150 MM DIAMETER OF TOOLS: HORIZONTAL SHAFT: 205 MM VERTICAL SPINDLE: 160-225 MM JOINT DIAMETER: 200-205 MM PROFILE SHAFT SPINDLE 140-300 (50) MM CHAMFER MILLS 140 / 45&ACIRC;&DEG; X10MM TENSION DECREASE NORMALLY (WITH FULL WORKING WIDTH) DRESSING SHAFT MAX.: 10 MM (4 MM) THICKNESS SHAFT MAX.: 16 MM (5 MM) VERTICAL SHAFT LEFT MAX: 16 MM (5 MM) VERTICAL SHAFT RIGHT MAX: 10 MM (5 MM) CHAMFER SIZE MAX: 6 MM / 45&ACIRC;&DEG; OPERATING VOLTAGE 400 V / 50 HZ INSTALIERTE POWER: 262 KW COMPRESSED AIR: 6 BAR PNEUMATIC COMPONENT: FESTO CONTROL CABINET ACCORDING TO VDE, COMPONENT: SIEMENS, KL&ATILDE;&PARA;CKNER-M&ATILDE;&PARA;LLER, TELEMECANIQUE SOUNDPROOF CABIN OF LIGHTING, WINDOW WITH DOUBLE GLAZED WINDOWS, NOISE REDUCTION ABOUT 15DB SERVICE CRANE IN THE CABIN TOOL GRINDING MACHINE IS SOLD OPERATOR PANEL WITH SIMATIC OP77B OPERATION PANEL AND ALL OPERATOR BUTTONS. FREE-STANDING. DUST NOZZLE: HORIZONTAL: 1 X 200MM, 1 X 250MM VERTICAL: 4 X 200MM CHAMFER MILLS 4 X 80 MM EXTRACTION SPEED: MIN 30 M / S WEIGHT: 19000 KG PRICE ON REQUEST
Vendedor: SN-InTec Ltd.& CO.KG
Año de construcción: usado
Ubicación: Land-pressure:230 t<br/>chamfer lenght:4050 mm<br/>distance between columns:3550 mm<br/>slide stroke:250 mm<br/>throat:305 mm<br/>distance table/ram:min. 250 - max. 500 mm<br/>stroke speed - idle:max. 140 mm/sec.<br/>pressing speed:max. 9 mm/sec.<br/>storke speed - withdrawal:max. 140 mm/sec.<br/>total power requirement:18,5 kw<br/>safety distance:min. 108 mm<br/>slowing-down time:44 ms<br/>tracking travel:4 mm<br/>oil volume:250 l<br/>weight of the machine ca.:16,5 t<br/>dimensions of the machine ca.:6200 x 3290 x 2800 mm<br/><br/>pressure in the hydraulic system: max. 280 bar pressure in the pneumatic system: 6 +/- 1 bar operating voltage: 3x 400v / pe / 50 hz rated current of main fuse: max. 63 a connection cable: 25.5 kva  - only 2085 operating hours !! - without tools! - lasersafe / lazersafe can be used up to max. upper die height 440 mm. - documentation - backgauge cnc controlled x and r axis with freely programmable and thus infinitely adjustable stop depth and height for high accuracy - upper tool clamping 26mm, manual - lower tool clamping 13mm, manual - crowning cnc in the table  stop system x / r: - rear stop (stop carrier adjustment) stroke area x axis (from bend line): 5-1000 mm adjustment speed x-axis: max. 500 mm / sec. drive power x-axis: 1.0 kw - height adjustment (adjustment via servomotor r-axis) adjustment range r-axis (from table surface): 25-175 mm plant speed r axis: max. 150 mm / sec. drive power r-axis: 1.0 kw PRESSURE:230 T
CHAMFER LENGHT:4050 MM
DISTANCE BETWEEN COLUMNS:3550 MM
SLIDE STROKE:250 MM
THROAT:305 MM
DISTANCE TABLE/RAM:MIN. 250 - MAX. 500 MM
STROKE SPEED - IDLE:MAX. 140 MM/SEC.
PRESSING SPEED:MAX. 9 MM/SEC.
STORKE SPEED - WITHDRAWAL:MAX. 140 MM/SEC.
TOTAL POWER REQUIREMENT:18,5 KW
SAFETY DISTANCE:MIN. 108 MM
SLOWING-DOWN TIME:44 MS
TRACKING TRAVEL:4 MM
OIL VOLUME:250 L
WEIGHT OF THE MACHINE CA.:16,5 T
DIMENSIONS OF THE MACHINE CA.:6200 X 3290 X 2800 MM

PRESSURE IN THE HYDRAULIC SYSTEM: MAX. 280 BAR PRESSURE IN THE PNEUMATIC SYSTEM: 6 +/- 1 BAR OPERATING VOLTAGE: 3X 400V / PE / 50 HZ RATED CURRENT OF MAIN FUSE: MAX. 63 A CONNECTION CABLE: 25.5 KVA - ONLY 2085 OPERATING HOURS !! - WITHOUT TOOLS! - LASERSAFE / LAZERSAFE CAN BE USED UP TO MAX. UPPER DIE HEIGHT 440 MM. - DOCUMENTATION - BACKGAUGE CNC CONTROLLED X AND R AXIS WITH FREELY PROGRAMMABLE AND THUS INFINITELY ADJUSTABLE STOP DEPTH AND HEIGHT FOR HIGH ACCURACY - UPPER TOOL CLAMPING 26MM, MANUAL - LOWER TOOL CLAMPING 13MM, MANUAL - CROWNING CNC IN THE TABLE STOP SYSTEM X / R: - REAR STOP (STOP CARRIER ADJUSTMENT) STROKE AREA X AXIS (FROM BEND LINE): 5-1000 MM ADJUSTMENT SPEED X-AXIS: MAX. 500 MM / SEC. DRIVE POWER X-AXIS: 1.0 KW - HEIGHT ADJUSTMENT (ADJUSTMENT VIA SERVOMOTOR R-AXIS) ADJUSTMENT RANGE R-AXIS (FROM TABLE SURFACE): 25-175 MM PLANT SPEED R AXIS: MAX. 150 MM / SEC. DRIVE POWER R-AXIS: 1.0 KW
Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-vg condition

technical parameters:

-adhesive glue tank granules
-shaft with the adhesive on the disc

-guillotine pre-cutting,
-adjustable pressure rollers

-power saw cutting excess fringes
-trimming excess edges, wyokoobrotowe mills, straight from the phase i in radius
-power scraper planes profile-clearance
-buffing

-the thickness of the workpieces 10-60 mm
-thickness of edging 0.4-5 mm
-the minimum width of the workpieces 65 mm

-feed 9 m/min
-demand electricity 5.8 kw
-demand compressed air 6 bar -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VG CONDITION TECHNICAL PARAMETERS: -ADHESIVE GLUE TANK GRANULES -SHAFT WITH THE ADHESIVE ON THE DISC -GUILLOTINE PRE-CUTTING, -ADJUSTABLE PRESSURE ROLLERS -POWER SAW CUTTING EXCESS FRINGES -TRIMMING EXCESS EDGES, WYOKOOBROTOWE MILLS, STRAIGHT FROM THE PHASE I IN RADIUS -POWER SCRAPER PLANES PROFILE-CLEARANCE -BUFFING -THE THICKNESS OF THE WORKPIECES 10-60 MM -THICKNESS OF EDGING 0.4-5 MM -THE MINIMUM WIDTH OF THE WORKPIECES 65 MM -FEED 9 M/MIN -DEMAND ELECTRICITY 5.8 KW -DEMAND COMPRESSED AIR 6 BAR " MACHINE OVERALL DIMENSIONS: -LENGTH: 3200 MM -WIDTH: 1100 MM -HEIGHT: 1600 MM -WEIGHT 660KG
Vendedor: StanDrew
Año de construcción: usado
Precio: 19.830 €
Ubicación: Land-: 1.250 x 2.500 mm<br/>: 120 mm<br/>: 12 mm<br/>: 25 mm<br/>: 4 mm<br/>: 6 mm<br/>: 1/10 unter  mm<br/>: . 470 ca l<br/>: 3.060 mm<br/>: 1.760 mm<br/>: 1.500 mm<br/>: 500 kg<br/>compressed air powered plasma source hypertherm powermax 45<br/>cnc-workbench software (external pc not included)<br/>adjustable rollers<br/>precision profile rail guide (hiwin)<br/>zero backlash htd drive belt<br/>driven by step motors<br/>solid frame construction<br/>seperate renewable support grate<br/>water trough to catch flying sparks<br/>swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height<br/>hand operation unit for comfortable processing and set up on the workpiece<br/>users manual in german<br/>complies with the ce regulations<br/><br/><br/>plamacut 2512 with alternative plasma sources:<br/><br/><br/>    hypertherm pmx<br/>65 pmx<br/>85 pmx<br/>105 pmx<br/>125   plasma type comp. air comp. air comp. air comp. air   plunge power  16 mm  20 mm  22 mm  25 mm   separating cut  32 mm  38 mm  44 mm  55 mm   recommended thickness<br/>(unalloyed steel)  6 mm  16 mm  19 mm  25 mm   max. thickness<br/>(unalloyed steel)  16 mm  20 mm  22 mm  32 mm   price<br/> ? 21.120,- ? 22.420,- ? 24.100,- ? 26.940,-   <br/><br/>(kjellberg plasma sources available on request)<br/><br/><br/>options:<br/><br/><br/>   water tank to quickly fill and drain the trough ? 2.670,-   height adjustment by arc voltage ? 2.220,-   set-up laser ? 220,-   pneumatic marking arbor ? 680,-   pneumatic engraver ? 1.700,-   suction bridge (preparation for suction Ø 160 mm,<br/>wimportant for zinc-plated- and thin sheets) ? 840,-   suction- and filter unit caremaster ifa 1,1 kw,<br/>fan power 2.500 m³/h ? 2.150,-   <br/><br/><br/><br/>working area: 1.250 x 2.500 mm<br/>height of bridge opening: 120 mm<br/>plasma source: hypertherm powermax 45<br/>plunge power: 12 mm<br/>separating cut: 25 mm<br/>recommended thickness (unalloyed steel): 4 mm<br/>max. thickness (unalloyed steel): 6 mm<br/>electrical power: 45 a 50% power-on time, 32 a 100% power-on time<br/>rapid speed: 24 m/min<br/>repeatable accuracy: under 1/10 mm<br/>max. unit mass: 500 kg/m²<br/>volume water trough: ca. 470 l<br/>length: 3.060 mm<br/>width: 1.760 mm<br/>height: 1.500 mm<br/>weight: 500 kg<br/><br/><br/><br/> : 1.250 X 2.500 MM
: 120 MM
: 12 MM
: 25 MM
: 4 MM
: 6 MM
: 1/10 UNTER MM
: . 470 CA L
: 3.060 MM
: 1.760 MM
: 1.500 MM
: 500 KG
COMPRESSED AIR POWERED PLASMA SOURCE HYPERTHERM POWERMAX 45
CNC-WORKBENCH SOFTWARE (EXTERNAL PC NOT INCLUDED)
ADJUSTABLE ROLLERS
PRECISION PROFILE RAIL GUIDE (HIWIN)
ZERO BACKLASH HTD DRIVE BELT
DRIVEN BY STEP MOTORS
SOLID FRAME CONSTRUCTION
SEPERATE RENEWABLE SUPPORT GRATE
WATER TROUGH TO CATCH FLYING SPARKS
SWIMMING BURNER BEARING IN COMBINATION WITH EXCHANGEABLE SLIDE SCREWS, ENABLES CONSTANT CUTTING HEIGHT
HAND OPERATION UNIT FOR COMFORTABLE PROCESSING AND SET UP ON THE WORKPIECE
USERS MANUAL IN GERMAN
COMPLIES WITH THE CE REGULATIONS


PLAMACUT 2512 WITH ALTERNATIVE PLASMA SOURCES:


 HYPERTHERM PMX
65 PMX
85 PMX
105 PMX
125 PLASMA TYPE COMP. AIR COMP. AIR COMP. AIR COMP. AIR PLUNGE POWER  16 MM  20 MM  22 MM  25 MM SEPARATING CUT  32 MM  38 MM  44 MM  55 MM RECOMMENDED THICKNESS
(UNALLOYED STEEL)  6 MM  16 MM  19 MM  25 MM MAX. THICKNESS
(UNALLOYED STEEL)  16 MM  20 MM  22 MM  32 MM PRICE
? 21.120,- ? 22.420,- ? 24.100,- ? 26.940,-

(KJELLBERG PLASMA SOURCES AVAILABLE ON REQUEST)


OPTIONS:


WATER TANK TO QUICKLY FILL AND DRAIN THE TROUGH ? 2.670,- HEIGHT ADJUSTMENT BY ARC VOLTAGE ? 2.220,- SET-UP LASER ? 220,- PNEUMATIC MARKING ARBOR ? 680,- PNEUMATIC ENGRAVER ? 1.700,- SUCTION BRIDGE (PREPARATION FOR SUCTION Ø 160 MM,
WIMPORTANT FOR ZINC-PLATED- AND THIN SHEETS) ? 840,- SUCTION- AND FILTER UNIT CAREMASTER IFA 1,1 KW,
FAN POWER 2.500 M³/H ? 2.150,-



WORKING AREA: 1.250 X 2.500 MM
HEIGHT OF BRIDGE OPENING: 120 MM
PLASMA SOURCE: HYPERTHERM POWERMAX 45
PLUNGE POWER: 12 MM
SEPARATING CUT: 25 MM
RECOMMENDED THICKNESS (UNALLOYED STEEL): 4 MM
MAX. THICKNESS (UNALLOYED STEEL): 6 MM
ELECTRICAL POWER: 45 A 50% POWER-ON TIME, 32 A 100% POWER-ON TIME
RAPID SPEED: 24 M/MIN
REPEATABLE ACCURACY: UNDER 1/10 MM
MAX. UNIT MASS: 500 KG/M²
VOLUME WATER TROUGH: CA. 470 L
LENGTH: 3.060 MM
WIDTH: 1.760 MM
HEIGHT: 1.500 MM
WEIGHT: 500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-felder machine type g300 to wrapping furniture plate flange. modern technology on a length of less than 2 metres, constant pressure, indexing roller system for fast and accurate fit for a wide range of flanges, scissors for precision milling and cutting impact, glue tank.

-machine in stock
-after reviewing the technical
-vg condition
-year of manufacture: 2009

technical parameters:

-thickness of edging min.-max. 0.4 – 3.0 mm
-the thickness of the element of the min-max. 10-45 mm

-saw trimming
-trimming excess edges on or profile
-is used to remove the excess edges at the top and bottom edges of the blanks

-milling line
-edging edges at an angle or in the round in one working cycle
-excess milling flange Ø 70 mm, 6, a = 15 °, r = 2 mm

-surveys made by felder
-slender dimensions
-accurate and very easy to use

-table dimensions 2000 x 300 mm
-compressed air 6 bar
– power supply 400 v
-the power of 3.2 in

-spindle with glue and glue container
-grooved roll for adhesive ensures even coating on the edge of the workpiece
-feed 9 m/min

external dimensions:

-length of 2000 mm
-height 650 mm
-width: 1260 mm

-weight 360 kg net

features of the machine:

-opportunities for fine adjustment
-the ability to accurately set the plates between 10-45 mm zoom
-milling line
-edging edges at an angle or in the round in one working cycle.
-plate input
-disc feeder for rollers with flange without glue
-spindle with glue and glue container
-grooved roll for adhesive provides uniform glue to the edge of the workpiece.
-pressure unit
-pressure rollers affix tape skirting the spring core, providing a perfect combination.
-saw trimming
-highly precise guidance of the trimming unit guarantee perfect cutting results.
-trimming excess edges to or from the profile.
-is used to remove the excess edges at the top and bottom edge of the piece.

-perfect finish using flanges type abs and pvc. FELDER MACHINE TYPE G300 TO WRAPPING FURNITURE PLATE FLANGE. MODERN TECHNOLOGY ON A LENGTH OF LESS THAN 2 METRES, CONSTANT PRESSURE, INDEXING ROLLER SYSTEM FOR FAST AND ACCURATE FIT FOR A WIDE RANGE OF FLANGES, SCISSORS FOR PRECISION MILLING AND CUTTING IMPACT, GLUE TANK. -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VG CONDITION -YEAR OF MANUFACTURE: 2009 TECHNICAL PARAMETERS: -THICKNESS OF EDGING MIN.-MAX. 0.4 – 3.0 MM -THE THICKNESS OF THE ELEMENT OF THE MIN-MAX. 10-45 MM -SAW TRIMMING -TRIMMING EXCESS EDGES ON OR PROFILE -IS USED TO REMOVE THE EXCESS EDGES AT THE TOP AND BOTTOM EDGES OF THE BLANKS -MILLING LINE -EDGING EDGES AT AN ANGLE OR IN THE ROUND IN ONE WORKING CYCLE -EXCESS MILLING FLANGE Ø 70 MM, 6, A = 15 °, R = 2 MM -SURVEYS MADE BY FELDER -SLENDER DIMENSIONS -ACCURATE AND VERY EASY TO USE -TABLE DIMENSIONS 2000 X 300 MM -COMPRESSED AIR 6 BAR – POWER SUPPLY 400 V -THE POWER OF 3.2 IN -SPINDLE WITH GLUE AND GLUE CONTAINER -GROOVED ROLL FOR ADHESIVE ENSURES EVEN COATING ON THE EDGE OF THE WORKPIECE -FEED 9 M/MIN EXTERNAL DIMENSIONS: -LENGTH OF 2000 MM -HEIGHT 650 MM -WIDTH: 1260 MM -WEIGHT 360 KG NET FEATURES OF THE MACHINE: -OPPORTUNITIES FOR FINE ADJUSTMENT -THE ABILITY TO ACCURATELY SET THE PLATES BETWEEN 10-45 MM ZOOM -MILLING LINE -EDGING EDGES AT AN ANGLE OR IN THE ROUND IN ONE WORKING CYCLE. -PLATE INPUT -DISC FEEDER FOR ROLLERS WITH FLANGE WITHOUT GLUE -SPINDLE WITH GLUE AND GLUE CONTAINER -GROOVED ROLL FOR ADHESIVE PROVIDES UNIFORM GLUE TO THE EDGE OF THE WORKPIECE. -PRESSURE UNIT -PRESSURE ROLLERS AFFIX TAPE SKIRTING THE SPRING CORE, PROVIDING A PERFECT COMBINATION. -SAW TRIMMING -HIGHLY PRECISE GUIDANCE OF THE TRIMMING UNIT GUARANTEE PERFECT CUTTING RESULTS. -TRIMMING EXCESS EDGES TO OR FROM THE PROFILE. -IS USED TO REMOVE THE EXCESS EDGES AT THE TOP AND BOTTOM EDGE OF THE PIECE. -PERFECT FINISH USING FLANGES TYPE ABS AND PVC.
Vendedor: StanDrew
Año de construcción: usado
Precio: 22.350 €
Ubicación: Land-: 1.500 x 3.000 mm<br/>: 120 mm<br/>: 12 mm<br/>: 25 mm<br/>: 4 mm<br/>: 6 mm<br/>: 1/10 unter  mm<br/>: . 630 ca l<br/>: 3.560 mm<br/>: 1.960 mm<br/>: 1.500 mm<br/>: 650 kg<br/>compressed air powered plasma source hypertherm powermax 45<br/>cnc-workbench software (external pc not included)<br/>adjustable rollers<br/>precision profile rail guide (hiwin)<br/>zero backlash htd drive belt<br/>driven by step motors<br/>solid frame construction<br/>seperate renewable support grate<br/>water trough to catch flying sparks<br/>swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height<br/>hand operation unit for comfortable processing and set up on the workpiece<br/>users manual in german<br/>complies with the ce regulations<br/><br/><br/>plamacut 3015 with alternative plasma sources:<br/><br/><br/>    hypertherm pmx<br/>65 pmx<br/>85 pmx<br/>105 pmx<br/>125 maxpro<br/>200*   plasma type comp. air comp. air comp. air comp. air oxygen   plunge power  16 mm  20 mm  22 mm  25 mm  32 mm   separating cut  32 mm  38 mm  44 mm  55 mm  75 mm   recommended thickness<br/>(unalloyed steel)  6 mm  16 mm  19 mm  25 mm  32 mm   max. thickness<br/>(unalloyed steel)  16 mm  20 mm  22 mm  32 mm  50 mm   price<br/> ? 23.640,- ? 24.950,- ? 26.530,- ? 29.460,- ? 41.930,-   <br/><br/>*plasma gas oxygen, additionally shield gas (air, nitrogen)<br/><br/>(kjellberg plasma sources available on request)<br/><br/><br/>options:<br/><br/><br/>   water tank to quickly fill and drain the trough ? 2.980,-   height adjustment by arc voltage ? 2.220,-   set-up laser ? 220,-   pneumatic marking arbor ? 680,-   pneumatic engraver ? 1.700,-   suction bridge (preparation for suction Ø 160 mm,<br/>wimportant for zinc-plated- and thin sheets) ? 840,-   suction- and filter unit caremaster ifa 1,1 kw,<br/>fan power 2.500 m³/h ? 2.150,-   <br/><br/><br/><br/>working area: 1.500 x 3.000 mm<br/>height of bridge opening: 120 mm<br/>plasma source: hypertherm powermax 45<br/>plunge power: 12 mm<br/>separating cut: 25 mm<br/>recommended thickness (unalloyed steel): 4 mm<br/>max. thickness (unalloyed steel): 6 mm<br/>electrical power: 45 a 50% power-on time, 32 a 100% power-on time<br/>rapid speed: 24 m/min<br/>repeatable accuracy: under 1/10 mm<br/>max. unit mass: 400 kg/m²<br/>volume water trough: ca. 630 l<br/>length: 3.560 mm<br/>width: 1.960 mm<br/>height: 1.500 mm<br/>weight: 650 kg<br/><br/><br/><br/> : 1.500 X 3.000 MM
: 120 MM
: 12 MM
: 25 MM
: 4 MM
: 6 MM
: 1/10 UNTER MM
: . 630 CA L
: 3.560 MM
: 1.960 MM
: 1.500 MM
: 650 KG
COMPRESSED AIR POWERED PLASMA SOURCE HYPERTHERM POWERMAX 45
CNC-WORKBENCH SOFTWARE (EXTERNAL PC NOT INCLUDED)
ADJUSTABLE ROLLERS
PRECISION PROFILE RAIL GUIDE (HIWIN)
ZERO BACKLASH HTD DRIVE BELT
DRIVEN BY STEP MOTORS
SOLID FRAME CONSTRUCTION
SEPERATE RENEWABLE SUPPORT GRATE
WATER TROUGH TO CATCH FLYING SPARKS
SWIMMING BURNER BEARING IN COMBINATION WITH EXCHANGEABLE SLIDE SCREWS, ENABLES CONSTANT CUTTING HEIGHT
HAND OPERATION UNIT FOR COMFORTABLE PROCESSING AND SET UP ON THE WORKPIECE
USERS MANUAL IN GERMAN
COMPLIES WITH THE CE REGULATIONS


PLAMACUT 3015 WITH ALTERNATIVE PLASMA SOURCES:


 HYPERTHERM PMX
65 PMX
85 PMX
105 PMX
125 MAXPRO
200* PLASMA TYPE COMP. AIR COMP. AIR COMP. AIR COMP. AIR OXYGEN PLUNGE POWER  16 MM  20 MM  22 MM  25 MM  32 MM SEPARATING CUT  32 MM  38 MM  44 MM  55 MM  75 MM RECOMMENDED THICKNESS
(UNALLOYED STEEL)  6 MM  16 MM  19 MM  25 MM  32 MM MAX. THICKNESS
(UNALLOYED STEEL)  16 MM  20 MM  22 MM  32 MM  50 MM PRICE
? 23.640,- ? 24.950,- ? 26.530,- ? 29.460,- ? 41.930,-

*PLASMA GAS OXYGEN, ADDITIONALLY SHIELD GAS (AIR, NITROGEN)

(KJELLBERG PLASMA SOURCES AVAILABLE ON REQUEST)


OPTIONS:


WATER TANK TO QUICKLY FILL AND DRAIN THE TROUGH ? 2.980,- HEIGHT ADJUSTMENT BY ARC VOLTAGE ? 2.220,- SET-UP LASER ? 220,- PNEUMATIC MARKING ARBOR ? 680,- PNEUMATIC ENGRAVER ? 1.700,- SUCTION BRIDGE (PREPARATION FOR SUCTION Ø 160 MM,
WIMPORTANT FOR ZINC-PLATED- AND THIN SHEETS) ? 840,- SUCTION- AND FILTER UNIT CAREMASTER IFA 1,1 KW,
FAN POWER 2.500 M³/H ? 2.150,-



WORKING AREA: 1.500 X 3.000 MM
HEIGHT OF BRIDGE OPENING: 120 MM
PLASMA SOURCE: HYPERTHERM POWERMAX 45
PLUNGE POWER: 12 MM
SEPARATING CUT: 25 MM
RECOMMENDED THICKNESS (UNALLOYED STEEL): 4 MM
MAX. THICKNESS (UNALLOYED STEEL): 6 MM
ELECTRICAL POWER: 45 A 50% POWER-ON TIME, 32 A 100% POWER-ON TIME
RAPID SPEED: 24 M/MIN
REPEATABLE ACCURACY: UNDER 1/10 MM
MAX. UNIT MASS: 400 KG/M²
VOLUME WATER TROUGH: CA. 630 L
LENGTH: 3.560 MM
WIDTH: 1.960 MM
HEIGHT: 1.500 MM
WEIGHT: 650 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-edgebander atila scm

-machine in stock
-after reviewing the technical
-vg condition

-year 2011
-ce mark

technical parameters:

-the maximum height of the wrapping element of 10 mm-55 mm
-the minimum material length: 140 mm

-feed 9 m/min
– manual height adjustment

-tank with adhesive
– the distemper-granules

-plate to the tape
-tape dispenser

-guillotine-pre cut veneers
-3 pressure rollers
-ball-cut veneers on front-back
-units for shaping edges (radial milling cutters)

scraper planes-to remove excess glue
polishing machines-the perfect smooth crown

-suitable for edging pvc/abs
-equipped with a cloth inside a element

-total power 6.1 kw
-power 3-phase
-intake air 6-8 atmospheres

machine overall dimensions:

-the length of the 3300mm
-width: 1200 mm
-height 1600 mm

-weight 1000 kg

-the machine is not painted
-very good condition

-exceptional strength, edge processing, which involves implementing rational and perfect finishing different profiles working in one pass EDGEBANDER ATILA SCM -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VG CONDITION -YEAR 2011 -CE MARK TECHNICAL PARAMETERS: -THE MAXIMUM HEIGHT OF THE WRAPPING ELEMENT OF 10 MM-55 MM -THE MINIMUM MATERIAL LENGTH: 140 MM -FEED 9 M/MIN – MANUAL HEIGHT ADJUSTMENT -TANK WITH ADHESIVE – THE DISTEMPER-GRANULES -PLATE TO THE TAPE -TAPE DISPENSER -GUILLOTINE-PRE CUT VENEERS -3 PRESSURE ROLLERS -BALL-CUT VENEERS ON FRONT-BACK -UNITS FOR SHAPING EDGES (RADIAL MILLING CUTTERS) SCRAPER PLANES-TO REMOVE EXCESS GLUE POLISHING MACHINES-THE PERFECT SMOOTH CROWN -SUITABLE FOR EDGING PVC/ABS -EQUIPPED WITH A CLOTH INSIDE A ELEMENT -TOTAL POWER 6.1 KW -POWER 3-PHASE -INTAKE AIR 6-8 ATMOSPHERES MACHINE OVERALL DIMENSIONS: -THE LENGTH OF THE 3300MM -WIDTH: 1200 MM -HEIGHT 1600 MM -WEIGHT 1000 KG -THE MACHINE IS NOT PAINTED -VERY GOOD CONDITION -EXCEPTIONAL STRENGTH, EDGE PROCESSING, WHICH INVOLVES IMPLEMENTING RATIONAL AND PERFECT FINISHING DIFFERENT PROFILES WORKING IN ONE PASS
Vendedor: StanDrew
Año de construcción: usado
Precio: 17.770 €
Ubicación: Land-: 1.000 x 2.000 mm<br/>: 120 mm<br/>: 12 mm<br/>: 25 mm<br/>: 4 mm<br/>: 6 mm<br/>: 1/10 unter  mm<br/>: . 300 ca l<br/>: 2.560 mm<br/>: 1.460 mm<br/>: 1.500 mm<br/>: 400 kg<br/>compressed air powered plasma source hypertherm powermax 45<br/>cnc-workbench software (external pc not included)<br/>adjustable rollers<br/>precision profile rail guide (hiwin)<br/>zero backlash htd drive belt<br/>driven by step motors<br/>solid frame construction<br/>seperate renewable support grate<br/>water trough to catch flying sparks<br/>swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height<br/>hand operation unit for comfortable processing and set up on the workpiece<br/>users manual in german<br/>complies with the ce regulations<br/><br/><br/>plamacut 2010 with alternative plasma sources:<br/><br/><br/>    hypertherm pmx<br/>65 pmx<br/>85 pmx<br/>105 pmx<br/>125   plasma type comp. air comp. air comp. air comp. air   plunge power  16 mm  20 mm  22 mm  25 mm   separating cut  32 mm  38 mm  44 mm  55 mm   recommended thickness<br/>(unalloyed steel)  6 mm  16 mm  19 mm  25 mm   max. thickness<br/>(unalloyed steel)  16 mm  20 mm  22 mm  32 mm   price<br/> ? 19.070,- ? 20.370,- ? 21.970,- ? 24.880,-   <br/><br/>(kjellberg plasma sources available on request)<br/><br/><br/>options:<br/><br/><br/>   water tank to quickly fill and drain the trough ? 2.270,-   height adjustment by arc voltage ? 2.220,-   set-up laser ? 220,-   pneumatic marking arbor ? 680,-   pneumatic engraver ? 1.700,-   suction bridge (preparation for suction Ø 160 mm,<br/>wimportant for zinc-plated- and thin sheets) ? 840,-   suction- and filter unit caremaster ifa 1,1 kw,<br/>fan power 2.500 m³/h ? 2.150,-   <br/><br/><br/><br/>working area: 1.000 x 2.000 mm<br/>height of bridge opening: 120 mm<br/>plasma source: hypertherm powermax 45<br/>plunge power: 12 mm<br/>separating cut: 25 mm<br/>recommended thickness (unalloyed steel): 4 mm<br/>max. thickness (unalloyed steel): 6 mm<br/>electrical power: 45 a 50% power-on time, 32 a 100% power-on time<br/>rapid speed: 24 m/min<br/>repeatable accuracy: under 1/10 mm<br/>max. unit mass: 400 kg/m²<br/>volume water trough: ca. 300 l<br/>length: 2.560 mm<br/>width: 1.460 mm<br/>height: 1.500 mm<br/>weight: 400 kg<br/><br/><br/><br/> : 1.000 X 2.000 MM
: 120 MM
: 12 MM
: 25 MM
: 4 MM
: 6 MM
: 1/10 UNTER MM
: . 300 CA L
: 2.560 MM
: 1.460 MM
: 1.500 MM
: 400 KG
COMPRESSED AIR POWERED PLASMA SOURCE HYPERTHERM POWERMAX 45
CNC-WORKBENCH SOFTWARE (EXTERNAL PC NOT INCLUDED)
ADJUSTABLE ROLLERS
PRECISION PROFILE RAIL GUIDE (HIWIN)
ZERO BACKLASH HTD DRIVE BELT
DRIVEN BY STEP MOTORS
SOLID FRAME CONSTRUCTION
SEPERATE RENEWABLE SUPPORT GRATE
WATER TROUGH TO CATCH FLYING SPARKS
SWIMMING BURNER BEARING IN COMBINATION WITH EXCHANGEABLE SLIDE SCREWS, ENABLES CONSTANT CUTTING HEIGHT
HAND OPERATION UNIT FOR COMFORTABLE PROCESSING AND SET UP ON THE WORKPIECE
USERS MANUAL IN GERMAN
COMPLIES WITH THE CE REGULATIONS


PLAMACUT 2010 WITH ALTERNATIVE PLASMA SOURCES:


 HYPERTHERM PMX
65 PMX
85 PMX
105 PMX
125 PLASMA TYPE COMP. AIR COMP. AIR COMP. AIR COMP. AIR PLUNGE POWER  16 MM  20 MM  22 MM  25 MM SEPARATING CUT  32 MM  38 MM  44 MM  55 MM RECOMMENDED THICKNESS
(UNALLOYED STEEL)  6 MM  16 MM  19 MM  25 MM MAX. THICKNESS
(UNALLOYED STEEL)  16 MM  20 MM  22 MM  32 MM PRICE
? 19.070,- ? 20.370,- ? 21.970,- ? 24.880,-

(KJELLBERG PLASMA SOURCES AVAILABLE ON REQUEST)


OPTIONS:


WATER TANK TO QUICKLY FILL AND DRAIN THE TROUGH ? 2.270,- HEIGHT ADJUSTMENT BY ARC VOLTAGE ? 2.220,- SET-UP LASER ? 220,- PNEUMATIC MARKING ARBOR ? 680,- PNEUMATIC ENGRAVER ? 1.700,- SUCTION BRIDGE (PREPARATION FOR SUCTION Ø 160 MM,
WIMPORTANT FOR ZINC-PLATED- AND THIN SHEETS) ? 840,- SUCTION- AND FILTER UNIT CAREMASTER IFA 1,1 KW,
FAN POWER 2.500 M³/H ? 2.150,-



WORKING AREA: 1.000 X 2.000 MM
HEIGHT OF BRIDGE OPENING: 120 MM
PLASMA SOURCE: HYPERTHERM POWERMAX 45
PLUNGE POWER: 12 MM
SEPARATING CUT: 25 MM
RECOMMENDED THICKNESS (UNALLOYED STEEL): 4 MM
MAX. THICKNESS (UNALLOYED STEEL): 6 MM
ELECTRICAL POWER: 45 A 50% POWER-ON TIME, 32 A 100% POWER-ON TIME
RAPID SPEED: 24 M/MIN
REPEATABLE ACCURACY: UNDER 1/10 MM
MAX. UNIT MASS: 400 KG/M²
VOLUME WATER TROUGH: CA. 300 L
LENGTH: 2.560 MM
WIDTH: 1.460 MM
HEIGHT: 1.500 MM
WEIGHT: 400 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-felder machine type g300 to wrapping furniture plate flange. modern technology on a length of less than 2 metres, constant pressure, indexing roller system for fast and accurate fit for a wide range of flanges, scissors for precision milling and cutting impact, glue tank.

-machine in stock
-after reviewing the technical
-vg condition
-year of manufacture: 2008

technical parameters:

-thickness of edging min.-max. 0.4 – 3.0 mm
-the thickness of the element of the min-max. 10-45 mm

-saw trimming
-trimming excess edges on or profile
-is used to remove the excess edges at the top and bottom edges of the blanks

-milling line
-edging edges at an angle or in the round in one working cycle
-excess milling flange Ø 70 mm, 6, a = 15 °, r = 2 mm

-surveys made by felder
-slender dimensions
-accurate and very easy to use
-polisher

-table dimensions 2000 x 300 mm
-compressed air 6 bar
– power supply 400 v
-the power of 3.2 in

-spindle with glue and glue container
-grooved roll for adhesive ensures even coating on the edge of the workpiece
-feed 9 m/min

external dimensions:

-length of 2000 mm
-height 650 mm
-width: 1260 mm

-weight 360 kg net

features of the machine:

-opportunities for fine adjustment
-the ability to accurately set the plates between 10-45 mm zoom
-milling line
-edging edges at an angle or in the round in one working cycle.
-plate input
-disc feeder for rollers with flange without glue
-spindle with glue and glue container
-grooved roll for adhesive provides uniform glue to the edge of the workpiece.
-pressure unit
-pressure rollers affix tape skirting the spring core, providing a perfect combination.
-saw trimming
-highly precise guidance of the trimming unit guarantee perfect cutting results.
-trimming excess edges to or from the profile.
-is used to remove the excess edges at the top and bottom edge of the piece.

-perfect finish using flanges type abs and pvc. FELDER MACHINE TYPE G300 TO WRAPPING FURNITURE PLATE FLANGE. MODERN TECHNOLOGY ON A LENGTH OF LESS THAN 2 METRES, CONSTANT PRESSURE, INDEXING ROLLER SYSTEM FOR FAST AND ACCURATE FIT FOR A WIDE RANGE OF FLANGES, SCISSORS FOR PRECISION MILLING AND CUTTING IMPACT, GLUE TANK. -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VG CONDITION -YEAR OF MANUFACTURE: 2008 TECHNICAL PARAMETERS: -THICKNESS OF EDGING MIN.-MAX. 0.4 – 3.0 MM -THE THICKNESS OF THE ELEMENT OF THE MIN-MAX. 10-45 MM -SAW TRIMMING -TRIMMING EXCESS EDGES ON OR PROFILE -IS USED TO REMOVE THE EXCESS EDGES AT THE TOP AND BOTTOM EDGES OF THE BLANKS -MILLING LINE -EDGING EDGES AT AN ANGLE OR IN THE ROUND IN ONE WORKING CYCLE -EXCESS MILLING FLANGE Ø 70 MM, 6, A = 15 °, R = 2 MM -SURVEYS MADE BY FELDER -SLENDER DIMENSIONS -ACCURATE AND VERY EASY TO USE -POLISHER -TABLE DIMENSIONS 2000 X 300 MM -COMPRESSED AIR 6 BAR – POWER SUPPLY 400 V -THE POWER OF 3.2 IN -SPINDLE WITH GLUE AND GLUE CONTAINER -GROOVED ROLL FOR ADHESIVE ENSURES EVEN COATING ON THE EDGE OF THE WORKPIECE -FEED 9 M/MIN EXTERNAL DIMENSIONS: -LENGTH OF 2000 MM -HEIGHT 650 MM -WIDTH: 1260 MM -WEIGHT 360 KG NET FEATURES OF THE MACHINE: -OPPORTUNITIES FOR FINE ADJUSTMENT -THE ABILITY TO ACCURATELY SET THE PLATES BETWEEN 10-45 MM ZOOM -MILLING LINE -EDGING EDGES AT AN ANGLE OR IN THE ROUND IN ONE WORKING CYCLE. -PLATE INPUT -DISC FEEDER FOR ROLLERS WITH FLANGE WITHOUT GLUE -SPINDLE WITH GLUE AND GLUE CONTAINER -GROOVED ROLL FOR ADHESIVE PROVIDES UNIFORM GLUE TO THE EDGE OF THE WORKPIECE. -PRESSURE UNIT -PRESSURE ROLLERS AFFIX TAPE SKIRTING THE SPRING CORE, PROVIDING A PERFECT COMBINATION. -SAW TRIMMING -HIGHLY PRECISE GUIDANCE OF THE TRIMMING UNIT GUARANTEE PERFECT CUTTING RESULTS. -TRIMMING EXCESS EDGES TO OR FROM THE PROFILE. -IS USED TO REMOVE THE EXCESS EDGES AT THE TOP AND BOTTOM EDGE OF THE PIECE. -PERFECT FINISH USING FLANGES TYPE ABS AND PVC.
Vendedor: StanDrew
Año de construcción: usado
Precio: 7.190 €
Ubicación: Land-cutting width: max. 310 mm<br/>cutting height: max. 125 mm<br/>saw blade diameter: 500 mm<br/>motor output: 5,5 kw<br/>speed: 2.800 u/min.<br/>required air-pressure: 6-8 bar<br/>working height: 900 +/- 20 mm<br/>dimensions (l/w/h): 4530x860x1300 mm<br/>salvador classic 50 - the semi-automatic cross-cut saw<br/>-------------------------------------------------- -<br/><br/>- structure completely made of lacquered, thick steel profiles, very stable<br/>- two-hand safety control in ergonomic position<br/>- cutting speed adjustable by pneumatic trimmer on the machine<br/>- system for compensating the weight of the cutting unit, for a long time<br/>life.<br/>- special amortizing system<br/>- upper pneumatic beam for pressing the workpiece with<br/>electropneumatic control<br/>- movement system of the low-pressure beam with new skf plain bearing with <br/>double<br/>- dust protection and automatic lubrication<br/>- electrical equipment according to ce standards<br/><br/><br/>technical specifications:<br/>-------------------------------<br/>cross section max. mm. 220x125, 260x100, 285x80, 310x50<br/>when sawing packages, the maximum height is mm. 100<br/><br/>sawing motor 5.5 kw<br/><br/>saw blade diameter 500 mm (z = 108, hole 35 mm)<br/><br/>speed ??2,800 u / min<br/><br/>suction nozzle diameter 1 x 120 mm, 1 x 100 mm<br/><br/>compressed air 6-8 bar<br/><br/>400 v, 50 hz, 3 phases<br/><br/>demonstration machine additionally equipped with:<br/>-------------------------------<br/>2 m inlet table with driven rollers<br/>rolls with load capacity 230 kg, diameter 60 mm, distance between the rollers <br/>250<br/>mm, depth 320 mm<br/><br/>2 m outlet with driven rollers<br/>rolls with load capacity 230 kg, diameter 60 mm, distance between the rollers <br/>250<br/>mm, depth 320 mm<br/><br/>2 pcs. strong mechanical-pneumatic stops with width 100 mm<br/><br/>further options such as longer inlet / outlet, stop systems on request!<br/><br/>(technical data according to manufacturer without warranty!)<br/><br/><br/><br/><br/> CUTTING WIDTH: MAX. 310 MM
CUTTING HEIGHT: MAX. 125 MM
SAW BLADE DIAMETER: 500 MM
MOTOR OUTPUT: 5,5 KW
SPEED: 2.800 U/MIN.
REQUIRED AIR-PRESSURE: 6-8 BAR
WORKING HEIGHT: 900 +/- 20 MM
DIMENSIONS (L/W/H): 4530X860X1300 MM
SALVADOR CLASSIC 50 - THE SEMI-AUTOMATIC CROSS-CUT SAW
-------------------------------------------------- -

- STRUCTURE COMPLETELY MADE OF LACQUERED, THICK STEEL PROFILES, VERY STABLE
- TWO-HAND SAFETY CONTROL IN ERGONOMIC POSITION
- CUTTING SPEED ADJUSTABLE BY PNEUMATIC TRIMMER ON THE MACHINE
- SYSTEM FOR COMPENSATING THE WEIGHT OF THE CUTTING UNIT, FOR A LONG TIME
LIFE.
- SPECIAL AMORTIZING SYSTEM
- UPPER PNEUMATIC BEAM FOR PRESSING THE WORKPIECE WITH
ELECTROPNEUMATIC CONTROL
- MOVEMENT SYSTEM OF THE LOW-PRESSURE BEAM WITH NEW SKF PLAIN BEARING WITH
DOUBLE
- DUST PROTECTION AND AUTOMATIC LUBRICATION
- ELECTRICAL EQUIPMENT ACCORDING TO CE STANDARDS


TECHNICAL SPECIFICATIONS:
-------------------------------
CROSS SECTION MAX. MM. 220X125, 260X100, 285X80, 310X50
WHEN SAWING PACKAGES, THE MAXIMUM HEIGHT IS MM. 100

SAWING MOTOR 5.5 KW

SAW BLADE DIAMETER 500 MM (Z = 108, HOLE 35 MM)

SPEED ??2,800 U / MIN

SUCTION NOZZLE DIAMETER 1 X 120 MM, 1 X 100 MM

COMPRESSED AIR 6-8 BAR

400 V, 50 HZ, 3 PHASES

DEMONSTRATION MACHINE ADDITIONALLY EQUIPPED WITH:
-------------------------------
2 M INLET TABLE WITH DRIVEN ROLLERS
ROLLS WITH LOAD CAPACITY 230 KG, DIAMETER 60 MM, DISTANCE BETWEEN THE ROLLERS
250
MM, DEPTH 320 MM

2 M OUTLET WITH DRIVEN ROLLERS
ROLLS WITH LOAD CAPACITY 230 KG, DIAMETER 60 MM, DISTANCE BETWEEN THE ROLLERS
250
MM, DEPTH 320 MM

2 PCS. STRONG MECHANICAL-PNEUMATIC STOPS WITH WIDTH 100 MM

FURTHER OPTIONS SUCH AS LONGER INLET / OUTLET, STOP SYSTEMS ON REQUEST!

(TECHNICAL DATA ACCORDING TO MANUFACTURER WITHOUT WARRANTY!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-
press dimter profipress t 5500 hf high frequency unit

line for gluing wood dimter type profipress t 5500 hf

-serviced by weinig service

-in stock
-after reviewing the technical
-very good condition
-production of germany
-year of manufacture: 2009

technical parameters:

-the length of the input elements of the min/max 900-5500 mm
-width lamelli 40-120 mm
-thickness of the 16-60 mm
-the width of the panels 250-1350 mm
-the dimension of the cut on the pile lateral 250-1350 mm
-the average dimension of 1000 mm
-pressure min/max 54-352 kn
-the width of the loading of the press in 1 cycle max. 1350 mm
– max. loading area of the press in 1 cycle 7.15 m²
-hydraulic pressure max. 260 bar
– type of wood hard
humidity of wood 8-12%
is a kind of glue 1-komponenten leim

line configuration

-automatic loading station and gluing integrated with profipress

-integrated camera for character recognition of chalk-press profi press t 5500-length/width glued elements 5500 × 1350 mm
-automatic adjustment of pressure
-hydraulic integrated
-control cabinet integrated control
-heat, high-frequency currents press ab
hf generator factory. cavallo 50 kw, generator pradow ab

the equipment package for gluing hardwood

-the thickness of the wood to 60 mm

-belt conveyor transporting for the press-dobiór plate with the press

-length of transporter 2700 mm

-automatic saw cutting width

– motor 13.5 kw, Ø 400 mm

-cross-cut saw endless glued panels on the desired width

-maximum plate width 1350 mm
-angle conveyor of disc storage station

-collection of plates and onward transport panels trimmed in width,
-length of transporter 1800 mm
-pusher to longitudinal saws mobile log automatically

-automatic saw cutting length

– motor 13.5 kw, Ø 450 mm
-slitting saw glued panels on the desired length of the final
-maximum plate width 1350 mm

roller conveyor on the output
-table reception of ready-cut plates and onward transportation to manual receive

-the width of the transporter 1350 mm PRESS DIMTER PROFIPRESS T 5500 HF HIGH FREQUENCY UNIT LINE FOR GLUING WOOD DIMTER TYPE PROFIPRESS T 5500 HF -SERVICED BY WEINIG SERVICE -IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION -PRODUCTION OF GERMANY -YEAR OF MANUFACTURE: 2009 TECHNICAL PARAMETERS: -THE LENGTH OF THE INPUT ELEMENTS OF THE MIN/MAX 900-5500 MM -WIDTH LAMELLI 40-120 MM -THICKNESS OF THE 16-60 MM -THE WIDTH OF THE PANELS 250-1350 MM -THE DIMENSION OF THE CUT ON THE PILE LATERAL 250-1350 MM -THE AVERAGE DIMENSION OF 1000 MM -PRESSURE MIN/MAX 54-352 KN -THE WIDTH OF THE LOADING OF THE PRESS IN 1 CYCLE MAX. 1350 MM – MAX. LOADING AREA OF THE PRESS IN 1 CYCLE 7.15 M² -HYDRAULIC PRESSURE MAX. 260 BAR – TYPE OF WOOD HARD HUMIDITY OF WOOD 8-12% IS A KIND OF GLUE 1-KOMPONENTEN LEIM LINE CONFIGURATION -AUTOMATIC LOADING STATION AND GLUING INTEGRATED WITH PROFIPRESS -INTEGRATED CAMERA FOR CHARACTER RECOGNITION OF CHALK-PRESS PROFI PRESS T 5500-LENGTH/WIDTH GLUED ELEMENTS 5500 × 1350 MM -AUTOMATIC ADJUSTMENT OF PRESSURE -HYDRAULIC INTEGRATED -CONTROL CABINET INTEGRATED CONTROL -HEAT, HIGH-FREQUENCY CURRENTS PRESS AB HF GENERATOR FACTORY. CAVALLO 50 KW, GENERATOR PRADOW AB THE EQUIPMENT PACKAGE FOR GLUING HARDWOOD -THE THICKNESS OF THE WOOD TO 60 MM -BELT CONVEYOR TRANSPORTING FOR THE PRESS-DOBIóR PLATE WITH THE PRESS -LENGTH OF TRANSPORTER 2700 MM -AUTOMATIC SAW CUTTING WIDTH – MOTOR 13.5 KW, Ø 400 MM -CROSS-CUT SAW ENDLESS GLUED PANELS ON THE DESIRED WIDTH -MAXIMUM PLATE WIDTH 1350 MM -ANGLE CONVEYOR OF DISC STORAGE STATION -COLLECTION OF PLATES AND ONWARD TRANSPORT PANELS TRIMMED IN WIDTH, -LENGTH OF TRANSPORTER 1800 MM -PUSHER TO LONGITUDINAL SAWS MOBILE LOG AUTOMATICALLY -AUTOMATIC SAW CUTTING LENGTH – MOTOR 13.5 KW, Ø 450 MM -SLITTING SAW GLUED PANELS ON THE DESIRED LENGTH OF THE FINAL -MAXIMUM PLATE WIDTH 1350 MM ROLLER CONVEYOR ON THE OUTPUT -TABLE RECEPTION OF READY-CUT PLATES AND ONWARD TRANSPORTATION TO MANUAL RECEIVE -THE WIDTH OF THE TRANSPORTER 1350 MM
Vendedor: StanDrew
Año de construcción: usado
Precio: used machinery auction RESALE 29.000 €
Ubicación: Land-weight approx.: 66000 kg<br/>plate width: 200 mm<br/>plate thickness: 0,5 mm<br/>dimensions (l x w x h) approx.: 18000 x 4000 x 1600 mm<br/>total power requirement: 185 kw<br/>description: <h3>used ocs profiling machine for the production of drawer slides, roller guides</h3> <br> machine no. 133-94<br> <br> <i>technical specifications</i><br> <br> strip width: 200 mm<br> strip thickness: 0,5 mm - 3 mm<br> working temperature: max. 40 ° c min. 5 ° c<br> saturation: max 65% min 8%<br> profile feed speed: 25 m/min.<br> length tolerance: +/- 0.25 mm<br> length of the elements to producing: max. 800<br> tape thickness: from 0.5 to 3 mm<br> material fepo2<br> thickness tolerance: +/- 5%<br> bandwidth: max. 200 mm<br> width tolerance: +/- 5%<br> forming heads no. 40<br> role shaft diameter: 60 mm<br> distance between the forming heads: 200-400 mm<br> center distance between upper and lower shafts: 95-185 mm<br> hydraulic power units no. 3<br> oil dynamic working pressure: max. 180 bar<br> capacity of the oil tank: 3520 l<br> <br> hydraulic power units: 185 kw<br> installed power: 250 kw<br> supply: 3x380v 50hz +/- 10%<br> WEIGHT APPROX.: 66000 KG
PLATE WIDTH: 200 MM
PLATE THICKNESS: 0,5 MM
DIMENSIONS (L X W X H) APPROX.: 18000 X 4000 X 1600 MM
TOTAL POWER REQUIREMENT: 185 KW
DESCRIPTION:

USED OCS PROFILING MACHINE FOR THE PRODUCTION OF DRAWER SLIDES, ROLLER GUIDES


MACHINE NO. 133-94

TECHNICAL SPECIFICATIONS

STRIP WIDTH: 200 MM
STRIP THICKNESS: 0,5 MM - 3 MM
WORKING TEMPERATURE: MAX. 40 ° C MIN. 5 ° C
SATURATION: MAX 65% MIN 8%
PROFILE FEED SPEED: 25 M/MIN.
LENGTH TOLERANCE: +/- 0.25 MM
LENGTH OF THE ELEMENTS TO PRODUCING: MAX. 800
TAPE THICKNESS: FROM 0.5 TO 3 MM
MATERIAL FEPO2
THICKNESS TOLERANCE: +/- 5%
BANDWIDTH: MAX. 200 MM
WIDTH TOLERANCE: +/- 5%
FORMING HEADS NO. 40
ROLE SHAFT DIAMETER: 60 MM
DISTANCE BETWEEN THE FORMING HEADS: 200-400 MM
CENTER DISTANCE BETWEEN UPPER AND LOWER SHAFTS: 95-185 MM
HYDRAULIC POWER UNITS NO. 3
OIL DYNAMIC WORKING PRESSURE: MAX. 180 BAR
CAPACITY OF THE OIL TANK: 3520 L

HYDRAULIC POWER UNITS: 185 KW
INSTALLED POWER: 250 KW
SUPPLY: 3X380V 50HZ +/- 10%
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 990 €
Ubicación: Land-maximum flow rate                                       600 l
tank                                                    272 l 
power                                                     4 kw 
overspeed                                             1,380 rpm 
maximum pressure                                         10 bar
tmin/tmax                                     + 5 °c / + 35 °c
compressor                                              n5g

 MAXIMUM FLOW RATE 600 L TANK 272 L POWER 4 KW OVERSPEED 1,380 RPM MAXIMUM PRESSURE 10 BAR TMIN/TMAX + 5 °C / + 35 °C COMPRESSOR N5G
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-tool length - max.: 3200 mm<br/>floor-plate width: 3200 mm<br/>sheet thickness - max.: 6 mm<br/>stroke max.: 300 mm<br/>hollow: 400 mm<br/>angle: 0-135 °<br/>drive: 22,5 kw<br/>total power requirement:  kw<br/>weight of the machine ca.: 12 t<br/>dimensions of the machine ca.: 14,7x5,7x3,9 m<br/>an innovative bending machine with oscillating double table allows one<br/>fast, automatic and economical production of trapezoidal sheets for<br/>the shipbuilding.<br/><br/>the davi promau bending machine davi mfd (machine folding double) is rightly so<br/>referred to as novel: in essence, it resembles already known<br/>bending machines with oscillating table, but just in detail, the<br/>davi promaus machine has many innovative features on it, according to its <br/>manufacturer<br/>to higher performance than conventional bending machines<br/>it is possible. decisive here is the new concept of bending machine and<br/>automation. this unit is the basis for an fms bending system that<br/>exceptional production and reduced production costs<br/>guarantee. the mfd is mainly for the machining of medium sized<br/>and large sheets of mild steel designed. the clever bending mechanism<br/>with the possibility of the sheet in a single clamping both up and<br/>to bend downwards, allows the bending of parts of different<br/>sizes and masses. thanks to the two tables, the machine can immediately from one<br/>go over to the other bending type.<br/><br/>simplified sheet metal handling<br/>with a built-in table drehanipulator the sheet metal in all<br/>be rotated at any angle positions, such as the lateral edges<br/>to bend the sheet. the entire sheet movement takes place automatically. the<br/>the operator therefore only has to position the pallets with the raw sheet and <br/>the<br/>remove finished parts. so far required work steps like positioning<br/>or turning around and turning the sheet completely eliminated - an advantage, <br/>because<br/>just for turning the sheets, with often considerable sheet metal weight, were<br/>so far often multiple operators and / or a crane required, because even at<br/>the robot joint was able to achieve the required high<br/>do not apply torques for turning the metal sheets. the davi<br/>mfd bending machine was designed for two-sided bending of up to 4,100 mm long<br/>and 8 mm thick sheets. with the drehanipulator can<br/>sheet metal plates automatically rotated in all directions without operator <br/>intervention<br/>become.<br/><br/>market success<br/>the bending machine has, according to davi promau in various markets, such as <br/>in the<br/>united states and northern europe, already well received.<br/>she is valued mainly because of her reduced personnel expenses, the<br/>short cycle times and above all because of the great flexibility that over the<br/>software allows the transition from one bending angle to another, without<br/>that die or bending tool must be changed. according to davi it ??is<br/>mfd is an exclusive machine: »no other italian<br/>the manufacturer is currently producing similar machines, says the company. in<br/>europe is only a similar machine model produced in germany, the<br/>but only has an oscillating table (although this for the<br/>double function upper and lower table is usable). the bending machine is with<br/>oscillating double table and 9 cnc axes for machining up to 4,100 mm<br/>wide and 9 mm thick sheet metal plates equipped.<br/><br/>machine features<br/>both oscillating tables are equipped with a hold-down table, a rear<br/>support table and a manipulator for the positioning of the metal sheets<br/>fitted. it has collets for the exact positioning of the<br/>sheet metal plate under the bending tools. stephen lowe, product manager of<br/>manufacturer explains: »the main feature of this innovative unit lies<br/>in that the bend can be made up and down without<br/>that while the sheets, as in conventional bending presses, turned over by hand<br/>need to become. because of this advantage, the machine becomes a novelty in the<br/>bending sector represents, of many american and northern european<br/>companies. the davi mfd is designed for the production of thin and<br/>medium-strength structural steel products such as doors, cabinets,<br/>metal fixtures, shelves, kitchens, switchboards, etc., but also for<br/>6 to 8 mm thick kastenprofi le designed and was as flexible<br/>production system fms designed. the bending system has an automatic<br/>sheet feeder, a tafelvorschub- / turntable (manipulator) and a<br/>outfeed and stacking system for the discharge and subsequent stacking of<br/>finished sheet metal parts. the control is done with the nc system »genius«, <br/>that of<br/>davi promau was developed. in the fms version all can<br/>processing steps can be managed with this control, without a<br/>simulation of the duty cycle or a teach-in are required. this<br/>allows a much faster creation of the machine program. at<br/>thickness or material changes will be valuable set-up time for the<br/>machine saved, since neither the tools nor the collets of the manipulator<br/>have to be replaced.<br/><br/><br/><br/><br/><br/> TOOL LENGTH - MAX.: 3200 MM
FLOOR-PLATE WIDTH: 3200 MM
SHEET THICKNESS - MAX.: 6 MM
STROKE MAX.: 300 MM
HOLLOW: 400 MM
ANGLE: 0-135 °
DRIVE: 22,5 KW
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 12 T
DIMENSIONS OF THE MACHINE CA.: 14,7X5,7X3,9 M
AN INNOVATIVE BENDING MACHINE WITH OSCILLATING DOUBLE TABLE ALLOWS ONE
FAST, AUTOMATIC AND ECONOMICAL PRODUCTION OF TRAPEZOIDAL SHEETS FOR
THE SHIPBUILDING.

THE DAVI PROMAU BENDING MACHINE DAVI MFD (MACHINE FOLDING DOUBLE) IS RIGHTLY SO
REFERRED TO AS NOVEL: IN ESSENCE, IT RESEMBLES ALREADY KNOWN
BENDING MACHINES WITH OSCILLATING TABLE, BUT JUST IN DETAIL, THE
DAVI PROMAUS MACHINE HAS MANY INNOVATIVE FEATURES ON IT, ACCORDING TO ITS
MANUFACTURER
TO HIGHER PERFORMANCE THAN CONVENTIONAL BENDING MACHINES
IT IS POSSIBLE. DECISIVE HERE IS THE NEW CONCEPT OF BENDING MACHINE AND
AUTOMATION. THIS UNIT IS THE BASIS FOR AN FMS BENDING SYSTEM THAT
EXCEPTIONAL PRODUCTION AND REDUCED PRODUCTION COSTS
GUARANTEE. THE MFD IS MAINLY FOR THE MACHINING OF MEDIUM SIZED
AND LARGE SHEETS OF MILD STEEL DESIGNED. THE CLEVER BENDING MECHANISM
WITH THE POSSIBILITY OF THE SHEET IN A SINGLE CLAMPING BOTH UP AND
TO BEND DOWNWARDS, ALLOWS THE BENDING OF PARTS OF DIFFERENT
SIZES AND MASSES. THANKS TO THE TWO TABLES, THE MACHINE CAN IMMEDIATELY FROM ONE
GO OVER TO THE OTHER BENDING TYPE.

SIMPLIFIED SHEET METAL HANDLING
WITH A BUILT-IN TABLE DREHANIPULATOR THE SHEET METAL IN ALL
BE ROTATED AT ANY ANGLE POSITIONS, SUCH AS THE LATERAL EDGES
TO BEND THE SHEET. THE ENTIRE SHEET MOVEMENT TAKES PLACE AUTOMATICALLY. THE
THE OPERATOR THEREFORE ONLY HAS TO POSITION THE PALLETS WITH THE RAW SHEET AND
THE
REMOVE FINISHED PARTS. SO FAR REQUIRED WORK STEPS LIKE POSITIONING
OR TURNING AROUND AND TURNING THE SHEET COMPLETELY ELIMINATED - AN ADVANTAGE,
BECAUSE
JUST FOR TURNING THE SHEETS, WITH OFTEN CONSIDERABLE SHEET METAL WEIGHT, WERE
SO FAR OFTEN MULTIPLE OPERATORS AND / OR A CRANE REQUIRED, BECAUSE EVEN AT
THE ROBOT JOINT WAS ABLE TO ACHIEVE THE REQUIRED HIGH
DO NOT APPLY TORQUES FOR TURNING THE METAL SHEETS. THE DAVI
MFD BENDING MACHINE WAS DESIGNED FOR TWO-SIDED BENDING OF UP TO 4,100 MM LONG
AND 8 MM THICK SHEETS. WITH THE DREHANIPULATOR CAN
SHEET METAL PLATES AUTOMATICALLY ROTATED IN ALL DIRECTIONS WITHOUT OPERATOR
INTERVENTION
BECOME.

MARKET SUCCESS
THE BENDING MACHINE HAS, ACCORDING TO DAVI PROMAU IN VARIOUS MARKETS, SUCH AS
IN THE
UNITED STATES AND NORTHERN EUROPE, ALREADY WELL RECEIVED.
SHE IS VALUED MAINLY BECAUSE OF HER REDUCED PERSONNEL EXPENSES, THE
SHORT CYCLE TIMES AND ABOVE ALL BECAUSE OF THE GREAT FLEXIBILITY THAT OVER THE
SOFTWARE ALLOWS THE TRANSITION FROM ONE BENDING ANGLE TO ANOTHER, WITHOUT
THAT DIE OR BENDING TOOL MUST BE CHANGED. ACCORDING TO DAVI IT ??IS
MFD IS AN EXCLUSIVE MACHINE: »NO OTHER ITALIAN
THE MANUFACTURER IS CURRENTLY PRODUCING SIMILAR MACHINES, SAYS THE COMPANY. IN
EUROPE IS ONLY A SIMILAR MACHINE MODEL PRODUCED IN GERMANY, THE
BUT ONLY HAS AN OSCILLATING TABLE (ALTHOUGH THIS FOR THE
DOUBLE FUNCTION UPPER AND LOWER TABLE IS USABLE). THE BENDING MACHINE IS WITH
OSCILLATING DOUBLE TABLE AND 9 CNC AXES FOR MACHINING UP TO 4,100 MM
WIDE AND 9 MM THICK SHEET METAL PLATES EQUIPPED.

MACHINE FEATURES
BOTH OSCILLATING TABLES ARE EQUIPPED WITH A HOLD-DOWN TABLE, A REAR
SUPPORT TABLE AND A MANIPULATOR FOR THE POSITIONING OF THE METAL SHEETS
FITTED. IT HAS COLLETS FOR THE EXACT POSITIONING OF THE
SHEET METAL PLATE UNDER THE BENDING TOOLS. STEPHEN LOWE, PRODUCT MANAGER OF
MANUFACTURER EXPLAINS: »THE MAIN FEATURE OF THIS INNOVATIVE UNIT LIES
IN THAT THE BEND CAN BE MADE UP AND DOWN WITHOUT
THAT WHILE THE SHEETS, AS IN CONVENTIONAL BENDING PRESSES, TURNED OVER BY HAND
NEED TO BECOME. BECAUSE OF THIS ADVANTAGE, THE MACHINE BECOMES A NOVELTY IN THE
BENDING SECTOR REPRESENTS, OF MANY AMERICAN AND NORTHERN EUROPEAN
COMPANIES. THE DAVI MFD IS DESIGNED FOR THE PRODUCTION OF THIN AND
MEDIUM-STRENGTH STRUCTURAL STEEL PRODUCTS SUCH AS DOORS, CABINETS,
METAL FIXTURES, SHELVES, KITCHENS, SWITCHBOARDS, ETC., BUT ALSO FOR
6 TO 8 MM THICK KASTENPROFI LE DESIGNED AND WAS AS FLEXIBLE
PRODUCTION SYSTEM FMS DESIGNED. THE BENDING SYSTEM HAS AN AUTOMATIC
SHEET FEEDER, A TAFELVORSCHUB- / TURNTABLE (MANIPULATOR) AND A
OUTFEED AND STACKING SYSTEM FOR THE DISCHARGE AND SUBSEQUENT STACKING OF
FINISHED SHEET METAL PARTS. THE CONTROL IS DONE WITH THE NC SYSTEM »GENIUS«,
THAT OF
DAVI PROMAU WAS DEVELOPED. IN THE FMS VERSION ALL CAN
PROCESSING STEPS CAN BE MANAGED WITH THIS CONTROL, WITHOUT A
SIMULATION OF THE DUTY CYCLE OR A TEACH-IN ARE REQUIRED. THIS
ALLOWS A MUCH FASTER CREATION OF THE MACHINE PROGRAM. AT
THICKNESS OR MATERIAL CHANGES WILL BE VALUABLE SET-UP TIME FOR THE
MACHINE SAVED, SINCE NEITHER THE TOOLS NOR THE COLLETS OF THE MANIPULATOR
HAVE TO BE REPLACED.





Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Precio: 10.000 €
Ubicación: Land-provide here a little used elumatec dg 79 + e111 map. bj. 2012

description:
solid cast iron construction ensures a flawless profile support for accurate angle cutting with integrated rotary table
swivelling range of the saw heads from 0 â° to 45 â° adjustable left and right adjustable. this foreign and innenmaã?zuschnitte possible
vertical and horizontal pneumatic material clamping devices ensure optimum fixation of profile
standard saw blades
standard with digital display e 111
dosiersprueheinrichtung
 
technical data:
smallest cutting length at 90 â° 520 mm
smallest cutting length at 45 â° tilted 520 mm
locking points at 15 â°, 30â°, and 45â°
swivel range of 0 â° to 45 â° adjustable
hydropneumatic saw feed
see cutting diagram section
saw blade diameter 380 mm
blade speed 2.800 1/min.
electrical connection 230/400 v, 3 ~, 50 hz
each motor 3 kw power output
compressed air supply 7 bar PROVIDE HERE A LITTLE USED ELUMATEC DG 79 + E111 MAP. BJ. 2012 DESCRIPTION: SOLID CAST IRON CONSTRUCTION ENSURES A FLAWLESS PROFILE SUPPORT FOR ACCURATE ANGLE CUTTING WITH INTEGRATED ROTARY TABLE SWIVELLING RANGE OF THE SAW HEADS FROM 0 &ACIRC;&DEG; TO 45 &ACIRC;&DEG; ADJUSTABLE LEFT AND RIGHT ADJUSTABLE. THIS FOREIGN AND INNENMA&ATILDE;?ZUSCHNITTE POSSIBLE VERTICAL AND HORIZONTAL PNEUMATIC MATERIAL CLAMPING DEVICES ENSURE OPTIMUM FIXATION OF PROFILE STANDARD SAW BLADES STANDARD WITH DIGITAL DISPLAY E 111 DOSIERSPRUEHEINRICHTUNG TECHNICAL DATA: SMALLEST CUTTING LENGTH AT 90 &ACIRC;&DEG; 520 MM SMALLEST CUTTING LENGTH AT 45 &ACIRC;&DEG; TILTED 520 MM LOCKING POINTS AT 15 &ACIRC;&DEG;, 30&ACIRC;&DEG;, AND 45&ACIRC;&DEG; SWIVEL RANGE OF 0 &ACIRC;&DEG; TO 45 &ACIRC;&DEG; ADJUSTABLE HYDROPNEUMATIC SAW FEED SEE CUTTING DIAGRAM SECTION SAW BLADE DIAMETER 380 MM BLADE SPEED 2.800 1/MIN. ELECTRICAL CONNECTION 230/400 V, 3 ~, 50 HZ EACH MOTOR 3 KW POWER OUTPUT COMPRESSED AIR SUPPLY 7 BAR
Vendedor: Herr Michael Posch
Año de construcción: usado
Ubicación: Land-manufacturer: brandt, type: profiline kdf 670, year: 2006, min-max edge material mm: 0,5-3, work piece width min-max mm: 120-3500, min.-max. workpiece length in mm: 10-55, min.-max. workpiece height in mm: 10-60, min-max feed m/min: 20, axis control: umstellung von 2mm auf fase automatisch, einlauflineal gesteuert: yes, premilling: yes, power per lamp: yes, coil magazine: yes, radius milling: yes, corner tracing type: yes, 2 motoren: yes, radius scraper: yes, flat scraper: yes, spraying system 2: yes, cleaning nozzles: yes, bonding part eva: yes, buffing unit: yes, top pressure belt/roller: rolle, hover cussion table: yes, machine lenght mm: ca. 6700, free text: abstapelgerät hinter der maschine, year :2006 MANUFACTURER: BRANDT, TYPE: PROFILINE KDF 670, YEAR: 2006, MIN-MAX EDGE MATERIAL MM: 0,5-3, WORK PIECE WIDTH MIN-MAX MM: 120-3500, MIN.-MAX. WORKPIECE LENGTH IN MM: 10-55, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-60, MIN-MAX FEED M/MIN: 20, AXIS CONTROL: UMSTELLUNG VON 2MM AUF FASE AUTOMATISCH, EINLAUFLINEAL GESTEUERT: YES, PREMILLING: YES, POWER PER LAMP: YES, COIL MAGAZINE: YES, RADIUS MILLING: YES, CORNER TRACING TYPE: YES, 2 MOTOREN: YES, RADIUS SCRAPER: YES, FLAT SCRAPER: YES, SPRAYING SYSTEM 2: YES, CLEANING NOZZLES: YES, BONDING PART EVA: YES, BUFFING UNIT: YES, TOP PRESSURE BELT/ROLLER: ROLLE, HOVER CUSSION TABLE: YES, MACHINE LENGHT MM: CA. 6700, FREE TEXT: ABSTAPELGERäT HINTER DER MASCHINE, YEAR :2006
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-frame width: 710 (mm)
stroke: 550 (mm)
max feed: 15 (m/min)

features:
-width adjustment
-electric feed
-electronically controlled automatic high pressure lubrication
-coupled safety device to release of the flywheel cover and simultaneous frame fixation
-hydraulic roller lift
-electric motor 7.5 kw to the full hydraulic drive
-electric remote control for rolling elevation and feed regulation
-single disc drive and band brake
-double wedges to the precise adjustment of the guides
	
construction:
-stress-free main stand in steel, cold rolled
-chassis beams made of special steel, one-piece machined
-profile stilts with roller and cylindrical roller bearings and sleeves
-main shaft with bireme tonnes bearings
-racks and elevator shaft full steel milled.
â??
amenities:
-door covers - all steel due with drive
-master strength indicator

1 hydraulic brake 1 drive unit 90 kw 1 steel pulley
1 set of motor rails in steel

1 flat belt with complete star-triangle switch and overload relays in the housing

1 print register 
 FRAME WIDTH: 710 (MM) STROKE: 550 (MM) MAX FEED: 15 (M/MIN) FEATURES: -WIDTH ADJUSTMENT -ELECTRIC FEED -ELECTRONICALLY CONTROLLED AUTOMATIC HIGH PRESSURE LUBRICATION -COUPLED SAFETY DEVICE TO RELEASE OF THE FLYWHEEL COVER AND SIMULTANEOUS FRAME FIXATION -HYDRAULIC ROLLER LIFT -ELECTRIC MOTOR 7.5 KW TO THE FULL HYDRAULIC DRIVE -ELECTRIC REMOTE CONTROL FOR ROLLING ELEVATION AND FEED REGULATION -SINGLE DISC DRIVE AND BAND BRAKE -DOUBLE WEDGES TO THE PRECISE ADJUSTMENT OF THE GUIDES CONSTRUCTION: -STRESS-FREE MAIN STAND IN STEEL, COLD ROLLED -CHASSIS BEAMS MADE OF SPECIAL STEEL, ONE-PIECE MACHINED -PROFILE STILTS WITH ROLLER AND CYLINDRICAL ROLLER BEARINGS AND SLEEVES -MAIN SHAFT WITH BIREME TONNES BEARINGS -RACKS AND ELEVATOR SHAFT FULL STEEL MILLED. &ACIRC;?? AMENITIES: -DOOR COVERS - ALL STEEL DUE WITH DRIVE -MASTER STRENGTH INDICATOR 1 HYDRAULIC BRAKE 1 DRIVE UNIT 90 KW 1 STEEL PULLEY 1 SET OF MOTOR RAILS IN STEEL 1 FLAT BELT WITH COMPLETE STAR-TRIANGLE SWITCH AND OVERLOAD RELAYS IN THE HOUSING 1 PRINT REGISTER
Vendedor: Simon Möhringer Anlagenbau GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 100 kg<br/>dimensions (l x w x h) approx.: 1200 x 700 x 1600 mm<br/>description: serial number 9138, max. profile cross-section 150 x 200 mm, with swivel guide WEIGHT APPROX.: 100 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 700 X 1600 MM
DESCRIPTION: SERIAL NUMBER 9138, MAX. PROFILE CROSS-SECTION 150 X 200 MM, WITH SWIVEL GUIDE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-travel distances:	
x: 2000 mm	
y: 1000 mm	
cutting force: 30 t	
stroke: 60 mm	
sheet thickness: 6 mm	
throat depth: 1000 mm	
working speed: 200 strokes / min	
engine power: 4 kw	
machine dimensions:	
4000 x 2800 x 1800 mm	
machine's weight about: 5250 kg	
accessories:	
operation manual	
pc with pre-installed fabriwin software for punching programs (supports dxf)	
extensive range of punches and dies	
square - rectangular and circular profiles with more diameters TRAVEL DISTANCES: X: 2000 MM Y: 1000 MM CUTTING FORCE: 30 T STROKE: 60 MM SHEET THICKNESS: 6 MM THROAT DEPTH: 1000 MM WORKING SPEED: 200 STROKES / MIN ENGINE POWER: 4 KW MACHINE DIMENSIONS: 4000 X 2800 X 1800 MM MACHINE'S WEIGHT ABOUT: 5250 KG ACCESSORIES: OPERATION MANUAL PC WITH PRE-INSTALLED FABRIWIN SOFTWARE FOR PUNCHING PROGRAMS (SUPPORTS DXF) EXTENSIVE RANGE OF PUNCHES AND DIES SQUARE - RECTANGULAR AND CIRCULAR PROFILES WITH MORE DIAMETERS
Vendedor: AMARON s.r.o.
Año de construcción: usado
Precio: used machinery auction RESALE 110 €
Ubicación: Land-weight approx.: 500 kg<br/>dimensions (l x w x h) approx.: 1000 x 800 x 1600 mm<br/>description: serial number 8845, max. profile cross-section approx. 160 x 160 mm, support length approx. 300 mm, guide can be swivelled by approx. 140° (+/- 70°), saw mounted on chassis WEIGHT APPROX.: 500 KG
DIMENSIONS (L X W X H) APPROX.: 1000 X 800 X 1600 MM
DESCRIPTION: SERIAL NUMBER 8845, MAX. PROFILE CROSS-SECTION APPROX. 160 X 160 MM, SUPPORT LENGTH APPROX. 300 MM, GUIDE CAN BE SWIVELLED BY APPROX. 140° (+/- 70°), SAW MOUNTED ON CHASSIS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-this prefabricated workshop hall with a gross floor area of about 649 m2 [hl29, 5 m * hb22m * th5, 6 m / fh8m] was carefully dismantled and stored for re-use. 
 
possibilities of future use: 
as industrial building, warehouse, machine shop, agricultural shed and much more. 
 
approximate dimensions: 
floor surface area: approx. 649 m2; 
width of the hall: approx. 22.00 m outer edge of wall cladding; 
system width: approx. 21521 mm c2c of steel frame uprights; 
hall length: 29.50 m outer edge of wall cladding; 
system length: 29100 mm c2c of steel frame end posts; 
bay width: approx.  5.05 m x 4 and 2 end fields of 4.45 m each; 
bays: 4, 45 + 5, 05 + 5, 05 + 5, 05 + 5, 05 + 4, 45 m c2c of uprights; 
eave height: approx.  5640mm top of uprights; 
ridge hight: approx.  8.00 m; 
roof pitch: 10 degrees (symmetrical saddle roof); 
 
load assumptions: 
snow load: sk = 0.85 kn/sqm on the ground (snow-load zone 2); 
wind load: alex = 0.62 kn/sqm wind pressure (wind zone 2); 
 
structural steel work: 
primary structure made of hot rolled euro profiles of steel grade s 235 jrg according to din en 1993-1-1 execution class exc2. four main frames with columns made of ipe 400 and beams ipe 300; intermediary columns hea 140; two end wall / gable wall frame with corner posts hea 120 and beams hea 120; gable posts hea 140 in the grid 5, 33 + 5, 43 + 5, 43 + 5, 33 m; the stabilization of the hall is 76, 1 x 2, 6 mm with crossed pressure flaccid roof and wall diagonal r 20 and pressure pipes. 
 
roof cladding:
iso roof (sip d 80) on galvanized cold formed roof purlins schrag z-180 of steel grade s 320 jrg (see structural design calculations). 
 
wall cladding: 
secondary structure made of cold formed schrag wall bars c 140-20 (see structural design calculations). 
the wall covering is not part of the offer (has been disposed of). 
 
equipment: 
1x roller shutter door (b 3800 x h. 4000 mm) in the side wall.
1x skylight light; 1x hall heating; 
  
documentation: 
there is a newly revised, verified structural design calculation from 2018. 
 
storage location: 
diepholz, lower saxony, germany. viewing by appointment. 
 
availability: 
ready for collection. 
 
net price: 
upon written request with full company / contact information.   THIS PREFABRICATED WORKSHOP HALL WITH A GROSS FLOOR AREA OF ABOUT 649 M2 [HL29, 5 M * HB22M * TH5, 6 M / FH8M] WAS CAREFULLY DISMANTLED AND STORED FOR RE-USE. POSSIBILITIES OF FUTURE USE: AS INDUSTRIAL BUILDING, WAREHOUSE, MACHINE SHOP, AGRICULTURAL SHED AND MUCH MORE. APPROXIMATE DIMENSIONS: FLOOR SURFACE AREA: APPROX. 649 M2; WIDTH OF THE HALL: APPROX. 22.00 M OUTER EDGE OF WALL CLADDING; SYSTEM WIDTH: APPROX. 21521 MM C2C OF STEEL FRAME UPRIGHTS; HALL LENGTH: 29.50 M OUTER EDGE OF WALL CLADDING; SYSTEM LENGTH: 29100 MM C2C OF STEEL FRAME END POSTS; BAY WIDTH: APPROX. 5.05 M X 4 AND 2 END FIELDS OF 4.45 M EACH; BAYS: 4, 45 + 5, 05 + 5, 05 + 5, 05 + 5, 05 + 4, 45 M C2C OF UPRIGHTS; EAVE HEIGHT: APPROX. 5640MM TOP OF UPRIGHTS; RIDGE HIGHT: APPROX. 8.00 M; ROOF PITCH: 10 DEGREES (SYMMETRICAL SADDLE ROOF); LOAD ASSUMPTIONS: SNOW LOAD: SK = 0.85 KN/SQM ON THE GROUND (SNOW-LOAD ZONE 2); WIND LOAD: ALEX = 0.62 KN/SQM WIND PRESSURE (WIND ZONE 2); STRUCTURAL STEEL WORK: PRIMARY STRUCTURE MADE OF HOT ROLLED EURO PROFILES OF STEEL GRADE S 235 JRG ACCORDING TO DIN EN 1993-1-1 EXECUTION CLASS EXC2. FOUR MAIN FRAMES WITH COLUMNS MADE OF IPE 400 AND BEAMS IPE 300; INTERMEDIARY COLUMNS HEA 140; TWO END WALL / GABLE WALL FRAME WITH CORNER POSTS HEA 120 AND BEAMS HEA 120; GABLE POSTS HEA 140 IN THE GRID 5, 33 + 5, 43 + 5, 43 + 5, 33 M; THE STABILIZATION OF THE HALL IS 76, 1 X 2, 6 MM WITH CROSSED PRESSURE FLACCID ROOF AND WALL DIAGONAL R 20 AND PRESSURE PIPES. ROOF CLADDING: ISO ROOF (SIP D 80) ON GALVANIZED COLD FORMED ROOF PURLINS SCHRAG Z-180 OF STEEL GRADE S 320 JRG (SEE STRUCTURAL DESIGN CALCULATIONS). WALL CLADDING: SECONDARY STRUCTURE MADE OF COLD FORMED SCHRAG WALL BARS C 140-20 (SEE STRUCTURAL DESIGN CALCULATIONS). THE WALL COVERING IS NOT PART OF THE OFFER (HAS BEEN DISPOSED OF). EQUIPMENT: 1X ROLLER SHUTTER DOOR (B 3800 X H. 4000 MM) IN THE SIDE WALL. 1X SKYLIGHT LIGHT; 1X HALL HEATING; DOCUMENTATION: THERE IS A NEWLY REVISED, VERIFIED STRUCTURAL DESIGN CALCULATION FROM 2018. STORAGE LOCATION: DIEPHOLZ, LOWER SAXONY, GERMANY. VIEWING BY APPOINTMENT. AVAILABILITY: READY FOR COLLECTION. NET PRICE: UPON WRITTEN REQUEST WITH FULL COMPANY / CONTACT INFORMATION.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 1000 kg<br/>dimensions (l x w x h) approx.: 16200 x 1400 x 1900 mm<br/>description: serial number 1720, with feed and discharge roller conveyor, each approx. 5000 mm, for joining inner profiles, insulating web and outer profile, 380 v, 50 hz, 2 a, 0.75 kw, roller conveyor with automatic insulating web feeder schÜco, article number 296356, yoc 1996, serial number 792-1103, with 3rd additional roller conveyor 3000 x 650 x 1000 mm, extensive accessories for the machine (e.g. schÜco rollers), height adjustment stroke approx. 200 mm, transverse adjustment stroke approx. 320 mm WEIGHT APPROX.: 1000 KG
DIMENSIONS (L X W X H) APPROX.: 16200 X 1400 X 1900 MM
DESCRIPTION: SERIAL NUMBER 1720, WITH FEED AND DISCHARGE ROLLER CONVEYOR, EACH APPROX. 5000 MM, FOR JOINING INNER PROFILES, INSULATING WEB AND OUTER PROFILE, 380 V, 50 HZ, 2 A, 0.75 KW, ROLLER CONVEYOR WITH AUTOMATIC INSULATING WEB FEEDER SCHÜCO, ARTICLE NUMBER 296356, YOC 1996, SERIAL NUMBER 792-1103, WITH 3RD ADDITIONAL ROLLER CONVEYOR 3000 X 650 X 1000 MM, EXTENSIVE ACCESSORIES FOR THE MACHINE (E.G. SCHÜCO ROLLERS), HEIGHT ADJUSTMENT STROKE APPROX. 200 MM, TRANSVERSE ADJUSTMENT STROKE APPROX. 320 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-to remove certain logistics hall with the ground of approx. hl88m (hl93m) * hb78m * th8, 7 m / fh11m and one covered gross floor area of approximately 7,250 square meters. in their second life cycle, this structure could serve for the construction of a warehouse, logistics warehouse, production hall with crane system, hall and many others. 
 
approximate dimensions: gross floor area m2 of: approx. 7250 square meters (estimated); 
â?? length: approx.  88-93 m inclined h end; 
border spacing: approx.   7.50 m longitudinal grid; 
halls-width: approx.  78,13 m ak planking; 
axle size: 19, 38 + 19, 38 + 19, 39 + 19, 39 middle middle columns)
crane runway-height: approx.   5.55 m to uk crane rail; 
traufen-height: approx.   8.77 m uk roof bowl; 
building height: approx.  11.11 m uk first sheet; 
 
load assumptions: control snow load: sk = 0.81 kn/sqm on the ground, snow load zone 1a; 
the original covering of eternit panels had a weight of 0.15 kn/m². 
wind load: kn/m2; 0.51 in wind load zone 1 (speed pressure / pressure); 
 
hall structure: screwed 4-ship-saddle roof frame welded primed / painted steel profiles. the longitudinal stiffness of the hall we by wind associations in the roof level and vertical associations in the side walls. the roof substructure consists of hot rolled primed / painted 240ger i profiles. 
 
roof covering: the original eternit panels were replaced a few years ago by steel trapezoidal panels. 
 
facade / wall cladding: einschaliges steel trapezoidal panels which was renewed for the part. the lower area of the wall covering consists of concrete / masonry (see pictures). 
 
equipment: hall 1 - 2-4 with 2x5to cranes; hall 3 with 2 x 7, 5to cranes; roller shutters, doors; 
 
documentation: the original structure from the 70s was redesigned 2007 due to modernization of crane systems. 
 
location: bavaria. visit by appointment. 
 
availability: the logistics warehouse is currently still in use, is to be dismantled but late april / early may 2019 within 6 weeks. 

net price: on request with full set. company / contact information.   TO REMOVE CERTAIN LOGISTICS HALL WITH THE GROUND OF APPROX. HL88M (HL93M) * HB78M * TH8, 7 M / FH11M AND ONE COVERED GROSS FLOOR AREA OF APPROXIMATELY 7,250 SQUARE METERS. IN THEIR SECOND LIFE CYCLE, THIS STRUCTURE COULD SERVE FOR THE CONSTRUCTION OF A WAREHOUSE, LOGISTICS WAREHOUSE, PRODUCTION HALL WITH CRANE SYSTEM, HALL AND MANY OTHERS. APPROXIMATE DIMENSIONS: GROSS FLOOR AREA M2 OF: APPROX. 7250 SQUARE METERS (ESTIMATED); â?? LENGTH: APPROX. 88-93 M INCLINED H END; BORDER SPACING: APPROX. 7.50 M LONGITUDINAL GRID; HALLS-WIDTH: APPROX. 78,13 M AK PLANKING; AXLE SIZE: 19, 38 + 19, 38 + 19, 39 + 19, 39 MIDDLE MIDDLE COLUMNS) CRANE RUNWAY-HEIGHT: APPROX. 5.55 M TO UK CRANE RAIL; TRAUFEN-HEIGHT: APPROX. 8.77 M UK ROOF BOWL; BUILDING HEIGHT: APPROX. 11.11 M UK FIRST SHEET; LOAD ASSUMPTIONS: CONTROL SNOW LOAD: SK = 0.81 KN/SQM ON THE GROUND, SNOW LOAD ZONE 1A; THE ORIGINAL COVERING OF ETERNIT PANELS HAD A WEIGHT OF 0.15 KN/M². WIND LOAD: KN/M2; 0.51 IN WIND LOAD ZONE 1 (SPEED PRESSURE / PRESSURE); HALL STRUCTURE: SCREWED 4-SHIP-SADDLE ROOF FRAME WELDED PRIMED / PAINTED STEEL PROFILES. THE LONGITUDINAL STIFFNESS OF THE HALL WE BY WIND ASSOCIATIONS IN THE ROOF LEVEL AND VERTICAL ASSOCIATIONS IN THE SIDE WALLS. THE ROOF SUBSTRUCTURE CONSISTS OF HOT ROLLED PRIMED / PAINTED 240GER I PROFILES. ROOF COVERING: THE ORIGINAL ETERNIT PANELS WERE REPLACED A FEW YEARS AGO BY STEEL TRAPEZOIDAL PANELS. FACADE / WALL CLADDING: EINSCHALIGES STEEL TRAPEZOIDAL PANELS WHICH WAS RENEWED FOR THE PART. THE LOWER AREA OF THE WALL COVERING CONSISTS OF CONCRETE / MASONRY (SEE PICTURES). EQUIPMENT: HALL 1 - 2-4 WITH 2X5TO CRANES; HALL 3 WITH 2 X 7, 5TO CRANES; ROLLER SHUTTERS, DOORS; DOCUMENTATION: THE ORIGINAL STRUCTURE FROM THE 70S WAS REDESIGNED 2007 DUE TO MODERNIZATION OF CRANE SYSTEMS. LOCATION: BAVARIA. VISIT BY APPOINTMENT. AVAILABILITY: THE LOGISTICS WAREHOUSE IS CURRENTLY STILL IN USE, IS TO BE DISMANTLED BUT LATE APRIL / EARLY MAY 2019 WITHIN 6 WEEKS. NET PRICE: ON REQUEST WITH FULL SET. COMPANY / CONTACT INFORMATION.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Precio: used machinery auction RESALE 2.200 €
Ubicación: Land-weight approx.: 700 kg<br/>dimensions (l x w x h) approx.: 2300 x 2150 x 1750 mm<br/>description: serial number 249, article number 283366, operating pressure 0.7 mpa, air consumption corner 300 l, insert for aluminium profiles, max. processing height 120 mm, max. processing width 100 mm, punch blade stroke 10.5 mm, power supply 230 v/50 hz, compressed air 6/7 bar, sound emission below 78 db WEIGHT APPROX.: 700 KG
DIMENSIONS (L X W X H) APPROX.: 2300 X 2150 X 1750 MM
DESCRIPTION: SERIAL NUMBER 249, ARTICLE NUMBER 283366, OPERATING PRESSURE 0.7 MPA, AIR CONSUMPTION CORNER 300 L, INSERT FOR ALUMINIUM PROFILES, MAX. PROCESSING HEIGHT 120 MM, MAX. PROCESSING WIDTH 100 MM, PUNCH BLADE STROKE 10.5 MM, POWER SUPPLY 230 V/50 HZ, COMPRESSED AIR 6/7 BAR, SOUND EMISSION BELOW 78 DB
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--new
-year of manufacture 2017
-ce certificate

technical parameters:

-the volume of the hopper 0.6 m3
-the rotor's working width 630 mm
-rotor diameter 260 mm
-pressure hydraulic drawers 160 bar

-speed rotor 80-120 u/min
-hydraulic pump engine 1.25 kw
-diameter suction fi 160 mm
-total power of 20 kw

-the number of knives 30 pieces
-size knives 30 mm x 30 mm, flat
-screen 30-30 mm
– connection 400v 50 hz 3ph
sps control siemens s7-1200
-very quiet 70.9 db

dimensions:

-length: 155 cm
-width: 125 cm
-height of 157

-weight approx. 1300 kg

shredder process a wide range of wood waste, which accumulate, for example. in industrial applications or carpentry workshops, saw mills or in the furniture industry. this list includes pallets and boxes, as well as long and short scrap of wood, veneer, chipboard, fibreboard, plywood and joiner's products, such as large furniture, window profiles, doors and stairs.

the main features of the machine:

* robust construction
* made in germany
the commendable
* for each professional -NEW -YEAR OF MANUFACTURE 2017 -CE CERTIFICATE TECHNICAL PARAMETERS: -THE VOLUME OF THE HOPPER 0.6 M3 -THE ROTOR'S WORKING WIDTH 630 MM -ROTOR DIAMETER 260 MM -PRESSURE HYDRAULIC DRAWERS 160 BAR -SPEED ROTOR 80-120 U/MIN -HYDRAULIC PUMP ENGINE 1.25 KW -DIAMETER SUCTION FI 160 MM -TOTAL POWER OF 20 KW -THE NUMBER OF KNIVES 30 PIECES -SIZE KNIVES 30 MM X 30 MM, FLAT -SCREEN 30-30 MM – CONNECTION 400V 50 HZ 3PH SPS CONTROL SIEMENS S7-1200 -VERY QUIET 70.9 DB DIMENSIONS: -LENGTH: 155 CM -WIDTH: 125 CM -HEIGHT OF 157 -WEIGHT APPROX. 1300 KG SHREDDER PROCESS A WIDE RANGE OF WOOD WASTE, WHICH ACCUMULATE, FOR EXAMPLE. IN INDUSTRIAL APPLICATIONS OR CARPENTRY WORKSHOPS, SAW MILLS OR IN THE FURNITURE INDUSTRY. THIS LIST INCLUDES PALLETS AND BOXES, AS WELL AS LONG AND SHORT SCRAP OF WOOD, VENEER, CHIPBOARD, FIBREBOARD, PLYWOOD AND JOINER'S PRODUCTS, SUCH AS LARGE FURNITURE, WINDOW PROFILES, DOORS AND STAIRS. THE MAIN FEATURES OF THE MACHINE: * ROBUST CONSTRUCTION * MADE IN GERMANY THE COMMENDABLE * FOR EACH PROFESSIONAL
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-: 200 mm<br/>: 150 mm<br/>: 120 mm<br/>: 100 mm<br/>: 150 mm<br/>: 4.000 mm<br/>: 2.000 mm<br/>: 200 mm<br/>: 4.100 bar<br/>the tci cutting bp-c 4020-1 machine includes the following elements:<br/><br/>? structure of the machine that includes the cutting table and a bridge with a cutting head for<br/>  abrasive and pure water cutting.<br/>? complete numeric control unit tcicnc 4.0, installed in a high-quality control cabinet with a<br/>  new generation multi touch screen.<br/>? automatic abrasive feeder with 200l capacity. tci abraline 1.0<br/>? automatic abrasive quantity regulator, independent for each cutting head, controlled from the<br/>  design software. tci abrasive 3.0<br/>? abrasive backstop system tci cut control 3.0<br/>? high pressure pump kmt of 50 hp sl-vi · 4100 bar · 1l with:<br/>   - hydraulic pump of variable flow and compensated pressure<br/>   - high / low pressure selection that allows piercing<br/>   - electrical inversion of the cutting head<br/>   - noise level below 80db<br/>   - leakage detection in de high-pressure circuit<br/>   - long lasting high pressure seals<br/>   - system to uninstall de piston without uninstalling the cylinder<br/>   - air / oil heat exchanger<br/>? installation of high pressure tubes<br/>? human machine interface tci smarttouch v6.0<br/>? communication system to communicate between the machine and tci<br/>? cad/cam software and postprocessor<br/>? machine safety system. declaration of conformity and ce marking<br/><br/><br/>the cutting system xy<br/><br/>? a frame built with structural steel profiles, for a working range of 4000mm in the x axix<br/>? water tank with material supports and water level regulation, constructed from stainless steel<br/>  sheets.<br/>? an axis with a guided system on a bridge independent from the cutting table (x axis) consisting<br/>  of a set of high precision skates and guides. this system provides a reliable linear transport,<br/>  ensures a high rigidity, a minimum of frictional resistance and a high load capacity. the<br/>  entire assembly is driven by a rack system / precision reducer, which guarantees maximum<br/>  performance, which is connected to a brushless ac motor.<br/>? the transverse linear axis (y axis) mounted on the linear axis x uses the same system<br/>  described in the previous point.<br/>? a nozzle support head (z axis) is provided with a vertical guide system. includes automatic<br/>  adjustment of cutting height.<br/>? one long lasting nozzle, with orifice and pneumatic jet control valve.<br/>? control panel integrated in the control cabinet to manage the machine.<br/>? pushbuttons for autimatic operation with emergency stop.<br/><br/><br/><br/><br/>max. material thickness:<br/>steel: 200 mm<br/>stainless steel: 150 mm<br/>aluminium: 120 mm<br/>glass: 100 mm<br/>pvc: 150 mm<br/>number of cutting heads: 1<br/>effective cutting range x axis: 4.000 mm<br/>effective cutting range y axis: 2.000 mm<br/>z axis travel: 200 mm<br/>max. simultaneous positioning speed: 85 m/min<br/>max. cutting speed: 20 m/min<br/>machine tolerance according to vdi/dgq 3441: +/- 0,05 mm/m<br/>repeatability precision: +/- 0,025 mm/m<br/>tank volume: 8 m3<br/>maximum supported weight for the workpiece: 790 kg/m2<br/>high pressure pump nominal power: 37 kw / 50 hp<br/>high pressure pumpb maximum working pressure: 4.100 bar<br/>maximum flow: 4.1 l/min<br/><br/><br/><br/> : 200 MM
: 150 MM
: 120 MM
: 100 MM
: 150 MM
: 4.000 MM
: 2.000 MM
: 200 MM
: 4.100 BAR
THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS:

? STRUCTURE OF THE MACHINE THAT INCLUDES THE CUTTING TABLE AND A BRIDGE WITH A CUTTING HEAD FOR
  ABRASIVE AND PURE WATER CUTTING.
? COMPLETE NUMERIC CONTROL UNIT TCICNC 4.0, INSTALLED IN A HIGH-QUALITY CONTROL CABINET WITH A
  NEW GENERATION MULTI TOUCH SCREEN.
? AUTOMATIC ABRASIVE FEEDER WITH 200L CAPACITY. TCI ABRALINE 1.0
? AUTOMATIC ABRASIVE QUANTITY REGULATOR, INDEPENDENT FOR EACH CUTTING HEAD, CONTROLLED FROM THE
  DESIGN SOFTWARE. TCI ABRASIVE 3.0
? ABRASIVE BACKSTOP SYSTEM TCI CUT CONTROL 3.0
? HIGH PRESSURE PUMP KMT OF 50 HP SL-VI · 4100 BAR · 1L WITH:
   - HYDRAULIC PUMP OF VARIABLE FLOW AND COMPENSATED PRESSURE
   - HIGH / LOW PRESSURE SELECTION THAT ALLOWS PIERCING
   - ELECTRICAL INVERSION OF THE CUTTING HEAD
   - NOISE LEVEL BELOW 80DB
   - LEAKAGE DETECTION IN DE HIGH-PRESSURE CIRCUIT
   - LONG LASTING HIGH PRESSURE SEALS
   - SYSTEM TO UNINSTALL DE PISTON WITHOUT UNINSTALLING THE CYLINDER
   - AIR / OIL HEAT EXCHANGER
? INSTALLATION OF HIGH PRESSURE TUBES
? HUMAN MACHINE INTERFACE TCI SMARTTOUCH V6.0
? COMMUNICATION SYSTEM TO COMMUNICATE BETWEEN THE MACHINE AND TCI
? CAD/CAM SOFTWARE AND POSTPROCESSOR
? MACHINE SAFETY SYSTEM. DECLARATION OF CONFORMITY AND CE MARKING


THE CUTTING SYSTEM XY

? A FRAME BUILT WITH STRUCTURAL STEEL PROFILES, FOR A WORKING RANGE OF 4000MM IN THE X AXIX
? WATER TANK WITH MATERIAL SUPPORTS AND WATER LEVEL REGULATION, CONSTRUCTED FROM STAINLESS STEEL
  SHEETS.
? AN AXIS WITH A GUIDED SYSTEM ON A BRIDGE INDEPENDENT FROM THE CUTTING TABLE (X AXIS) CONSISTING
  OF A SET OF HIGH PRECISION SKATES AND GUIDES. THIS SYSTEM PROVIDES A RELIABLE LINEAR TRANSPORT,
  ENSURES A HIGH RIGIDITY, A MINIMUM OF FRICTIONAL RESISTANCE AND A HIGH LOAD CAPACITY. THE
  ENTIRE ASSEMBLY IS DRIVEN BY A RACK SYSTEM / PRECISION REDUCER, WHICH GUARANTEES MAXIMUM
  PERFORMANCE, WHICH IS CONNECTED TO A BRUSHLESS AC MOTOR.
? THE TRANSVERSE LINEAR AXIS (Y AXIS) MOUNTED ON THE LINEAR AXIS X USES THE SAME SYSTEM
  DESCRIBED IN THE PREVIOUS POINT.
? A NOZZLE SUPPORT HEAD (Z AXIS) IS PROVIDED WITH A VERTICAL GUIDE SYSTEM. INCLUDES AUTOMATIC
  ADJUSTMENT OF CUTTING HEIGHT.
? ONE LONG LASTING NOZZLE, WITH ORIFICE AND PNEUMATIC JET CONTROL VALVE.
? CONTROL PANEL INTEGRATED IN THE CONTROL CABINET TO MANAGE THE MACHINE.
? PUSHBUTTONS FOR AUTIMATIC OPERATION WITH EMERGENCY STOP.




MAX. MATERIAL THICKNESS:
STEEL: 200 MM
STAINLESS STEEL: 150 MM
ALUMINIUM: 120 MM
GLASS: 100 MM
PVC: 150 MM
NUMBER OF CUTTING HEADS: 1
EFFECTIVE CUTTING RANGE X AXIS: 4.000 MM
EFFECTIVE CUTTING RANGE Y AXIS: 2.000 MM
Z AXIS TRAVEL: 200 MM
MAX. SIMULTANEOUS POSITIONING SPEED: 85 M/MIN
MAX. CUTTING SPEED: 20 M/MIN
MACHINE TOLERANCE ACCORDING TO VDI/DGQ 3441: +/- 0,05 MM/M
REPEATABILITY PRECISION: +/- 0,025 MM/M
TANK VOLUME: 8 M3
MAXIMUM SUPPORTED WEIGHT FOR THE WORKPIECE: 790 KG/M2
HIGH PRESSURE PUMP NOMINAL POWER: 37 KW / 50 HP
HIGH PRESSURE PUMPB MAXIMUM WORKING PRESSURE: 4.100 BAR
MAXIMUM FLOW: 4.1 L/MIN



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-vg condition

technical parameters:

-main engine power 37 kw
-engine power from the hydraulic pump 1.5 kw
-total power: 39.25 kw
-engine power ?mijki 0.75 kw

-automatic autorewers
-pull hydraulic
-rotation 90 u/min

-the rotor length 1500 mm
-multiple staggered knife shaft stuk 34
-dimensions: 40 mm x 40 mm
-sieve fi 20 mm
-knives lace

-diameter suction fi 250
-rotor diameter 275 mm
-height of drawers foot 275 mm
-the length of the drawer pressure 800 mm

overall dimensions of the machine:

-length of 270 cm
width 230 cm
-height 200 cm
-weight 3500 kg

wood chipper can process a wide range of wood waste, which accumulate, for example. in industrial applications or carpentry workshops, saw mills or in the furniture industry. this list includes pallets and boxes, as well as long and short scrap of wood, veneer, chipboard, fibreboard, plywood and joiner's products, such as large furniture, window profiles, doors and stairs.

the main features of the machine:

* robust construction
* a reputable german brand weima
* the leader among manufacturers of chippers
the commendable
* for each professional

patented v rotor

-the optimum supply of material
-minimum cutter wear
– small power consumption at high performance
is a small gap between the rotor and blades kontruj?cymi
-defined issue knife

contoured v rotor is made of die-cast and placed on a stable bearings
on its perimeter welded are special grips knife in his pockets
in them are cutting knives and bolted
this enables fast replacement blades
thanks to this design during the shredding material screws are damaged
recessed cutting blades have 4 cutting edges, which can be 4 x turn,
providing precise cutting with high performance. -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VG CONDITION TECHNICAL PARAMETERS: -MAIN ENGINE POWER 37 KW -ENGINE POWER FROM THE HYDRAULIC PUMP 1.5 KW -TOTAL POWER: 39.25 KW -ENGINE POWER ?MIJKI 0.75 KW -AUTOMATIC AUTOREWERS -PULL HYDRAULIC -ROTATION 90 U/MIN -THE ROTOR LENGTH 1500 MM -MULTIPLE STAGGERED KNIFE SHAFT STUK 34 -DIMENSIONS: 40 MM X 40 MM -SIEVE FI 20 MM -KNIVES LACE -DIAMETER SUCTION FI 250 -ROTOR DIAMETER 275 MM -HEIGHT OF DRAWERS FOOT 275 MM -THE LENGTH OF THE DRAWER PRESSURE 800 MM OVERALL DIMENSIONS OF THE MACHINE: -LENGTH OF 270 CM WIDTH 230 CM -HEIGHT 200 CM -WEIGHT 3500 KG WOOD CHIPPER CAN PROCESS A WIDE RANGE OF WOOD WASTE, WHICH ACCUMULATE, FOR EXAMPLE. IN INDUSTRIAL APPLICATIONS OR CARPENTRY WORKSHOPS, SAW MILLS OR IN THE FURNITURE INDUSTRY. THIS LIST INCLUDES PALLETS AND BOXES, AS WELL AS LONG AND SHORT SCRAP OF WOOD, VENEER, CHIPBOARD, FIBREBOARD, PLYWOOD AND JOINER'S PRODUCTS, SUCH AS LARGE FURNITURE, WINDOW PROFILES, DOORS AND STAIRS. THE MAIN FEATURES OF THE MACHINE: * ROBUST CONSTRUCTION * A REPUTABLE GERMAN BRAND WEIMA * THE LEADER AMONG MANUFACTURERS OF CHIPPERS THE COMMENDABLE * FOR EACH PROFESSIONAL PATENTED V ROTOR -THE OPTIMUM SUPPLY OF MATERIAL -MINIMUM CUTTER WEAR – SMALL POWER CONSUMPTION AT HIGH PERFORMANCE IS A SMALL GAP BETWEEN THE ROTOR AND BLADES KONTRUJ?CYMI -DEFINED ISSUE KNIFE CONTOURED V ROTOR IS MADE OF DIE-CAST AND PLACED ON A STABLE BEARINGS ON ITS PERIMETER WELDED ARE SPECIAL GRIPS KNIFE IN HIS POCKETS IN THEM ARE CUTTING KNIVES AND BOLTED THIS ENABLES FAST REPLACEMENT BLADES THANKS TO THIS DESIGN DURING THE SHREDDING MATERIAL SCREWS ARE DAMAGED RECESSED CUTTING BLADES HAVE 4 CUTTING EDGES, WHICH CAN BE 4 X TURN, PROVIDING PRECISE CUTTING WITH HIGH PERFORMANCE.
Vendedor: StanDrew
Año de construcción: usado
Precio: 26.300 €
Ubicación: Land-: 3000 mm<br/>: 250 kg<br/>the pax series positions the material along the x-axis for sequential, multiple punching of profiles.<br/><br/><br/> feeding unit with material guidings for positioning material clamps servomotor for positioning roller track table manually adjustable side guides touchscreen control <br/><br/>bigger sizes for x-axis on request.<br/><br/>the punching machine is not included in that price.<br/>if ordered together with a geka puma or hydracrop machine, the mounting on the machine is included. <br/>if ordered for retrofit, mounting will be charged addittionally.<br/><br/>x-axis: 3000 mm<br/>max. feeding speed: 24 m/min<br/>positioning accuracy: +/- 0,25 mm<br/>repeating accuracy: +/- 0,15 mm<br/>max. weight of workpiece: 250 kg<br/><br/><br/><br/> : 3000 MM
: 250 KG
THE PAX SERIES POSITIONS THE MATERIAL ALONG THE X-AXIS FOR SEQUENTIAL, MULTIPLE PUNCHING OF PROFILES.


FEEDING UNIT WITH MATERIAL GUIDINGS FOR POSITIONING MATERIAL CLAMPS SERVOMOTOR FOR POSITIONING ROLLER TRACK TABLE MANUALLY ADJUSTABLE SIDE GUIDES TOUCHSCREEN CONTROL

BIGGER SIZES FOR X-AXIS ON REQUEST.

THE PUNCHING MACHINE IS NOT INCLUDED IN THAT PRICE.
IF ORDERED TOGETHER WITH A GEKA PUMA OR HYDRACROP MACHINE, THE MOUNTING ON THE MACHINE IS INCLUDED. 
IF ORDERED FOR RETROFIT, MOUNTING WILL BE CHARGED ADDITTIONALLY.

X-AXIS: 3000 MM
MAX. FEEDING SPEED: 24 M/MIN
POSITIONING ACCURACY: +/- 0,25 MM
REPEATING ACCURACY: +/- 0,15 MM
MAX. WEIGHT OF WORKPIECE: 250 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-vg condition

-a well known reputable brand-weima

technical parameters:

-main engine power 37 kw
-engine power from the hydraulic pump 1.5 kw
-rotation 90 u/min

-automatic autorewers
-pull hydraulic

-the rotor length 1000 mm
-multiple staggered knife shaft set 23
-dimensions: 30 mm x 30 mm
-sieve fi 20 mm
-knives lace

-diameter suction fi 250
-rotor diameter 275 mm
-height of drawers foot 275 mm
-the length of the drawer pressure 800 mm

overall dimensions of the machine:

-length of 270 cm
width 230 cm
-height 200 cm
-weight 3000 kg

wood chipper can process a wide range of wood waste, which accumulate, for example. in industrial applications or carpentry workshops, saw mills or in the furniture industry. this list includes pallets and boxes, as well as long and short scrap of wood, veneer, chipboard, fibreboard, plywood and joiner's products, such as large furniture, window profiles, doors and stairs.

the main features of the machine:

* robust construction
* a reputable german brand weima
* the leader among manufacturers of chippers
the commendable
* for each professional

patented v rotor

-the optimum supply of material
-minimum cutter wear
– small power consumption at high performance
is a small gap between the rotor and blades kontruj?cymi
-defined issue knife

contoured v rotor is made of die-cast and placed on a stable bearings
on its perimeter welded are special grips knife in his pockets
in them are cutting knives and bolted
this enables fast replacement blades
thanks to this design during the shredding material screws are damaged
recessed cutting blades have 4 cutting edges, which can be 4 x turn,
providing precise cutting with high performance. -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VG CONDITION -A WELL KNOWN REPUTABLE BRAND-WEIMA TECHNICAL PARAMETERS: -MAIN ENGINE POWER 37 KW -ENGINE POWER FROM THE HYDRAULIC PUMP 1.5 KW -ROTATION 90 U/MIN -AUTOMATIC AUTOREWERS -PULL HYDRAULIC -THE ROTOR LENGTH 1000 MM -MULTIPLE STAGGERED KNIFE SHAFT SET 23 -DIMENSIONS: 30 MM X 30 MM -SIEVE FI 20 MM -KNIVES LACE -DIAMETER SUCTION FI 250 -ROTOR DIAMETER 275 MM -HEIGHT OF DRAWERS FOOT 275 MM -THE LENGTH OF THE DRAWER PRESSURE 800 MM OVERALL DIMENSIONS OF THE MACHINE: -LENGTH OF 270 CM WIDTH 230 CM -HEIGHT 200 CM -WEIGHT 3000 KG WOOD CHIPPER CAN PROCESS A WIDE RANGE OF WOOD WASTE, WHICH ACCUMULATE, FOR EXAMPLE. IN INDUSTRIAL APPLICATIONS OR CARPENTRY WORKSHOPS, SAW MILLS OR IN THE FURNITURE INDUSTRY. THIS LIST INCLUDES PALLETS AND BOXES, AS WELL AS LONG AND SHORT SCRAP OF WOOD, VENEER, CHIPBOARD, FIBREBOARD, PLYWOOD AND JOINER'S PRODUCTS, SUCH AS LARGE FURNITURE, WINDOW PROFILES, DOORS AND STAIRS. THE MAIN FEATURES OF THE MACHINE: * ROBUST CONSTRUCTION * A REPUTABLE GERMAN BRAND WEIMA * THE LEADER AMONG MANUFACTURERS OF CHIPPERS THE COMMENDABLE * FOR EACH PROFESSIONAL PATENTED V ROTOR -THE OPTIMUM SUPPLY OF MATERIAL -MINIMUM CUTTER WEAR – SMALL POWER CONSUMPTION AT HIGH PERFORMANCE IS A SMALL GAP BETWEEN THE ROTOR AND BLADES KONTRUJ?CYMI -DEFINED ISSUE KNIFE CONTOURED V ROTOR IS MADE OF DIE-CAST AND PLACED ON A STABLE BEARINGS ON ITS PERIMETER WELDED ARE SPECIAL GRIPS KNIFE IN HIS POCKETS IN THEM ARE CUTTING KNIVES AND BOLTED THIS ENABLES FAST REPLACEMENT BLADES THANKS TO THIS DESIGN DURING THE SHREDDING MATERIAL SCREWS ARE DAMAGED RECESSED CUTTING BLADES HAVE 4 CUTTING EDGES, WHICH CAN BE 4 X TURN, PROVIDING PRECISE CUTTING WITH HIGH PERFORMANCE.
Vendedor: StanDrew
Año de construcción: usado
Precio: 8.000 €
Ubicación: Land-: 60 x 3 mm<br/>: 60 x 4 mm<br/>: 64 x 4 mm<br/>: 64 x 3 mm<br/>: 60 x 4 mm<br/>: 60 x 4 mm<br/>: 64 x 4 mm<br/>: 64 x 4 mm<br/>: 60 x 4 mm<br/>: 50 x 4 mm<br/>: 35 mm<br/>: 30 x 30 mm<br/>: 10 x 60 mm<br/>: 50 x 50 x 6 mm<br/>: 40 x 20 x 6 mm<br/>: 300 mm<br/>: 10 mm<br/>: 180 °<br/>: 595 mm<br/>: 363 mm<br/>: 900 mm<br/>: 130 kg<br/>manual clamping electronic preselection of bending angle overload protection mobile by rolls and handle <br/><br/>incl. following tool:<br/><br/>steel former dm.  1 1/4",  r 90 mm<br/>counterbending brass die 1 1/4",<br/><br/><br/>alternative:<br/><br/>model topbender 050 t            euro   9.000,--<br/><br/>- 2 speeds 1,25 / 2,5 u/min<br/>- pc board with 8 groups each 9 steps<br/>- encoder to read the pressure die position<br/>- standard without tools<br/><br/>max. capacity:	<br/>gas tube: 2", gas x 4 mm<br/>standard steel tube: 60 x 3 mm<br/>furniture tube: 60 x 4 mm<br/>fe35 (for hydraulic tubes): 64 x 4 mm<br/>stainless steel aisi304-316: 64 x 3 mm<br/>stainless steel aisi308 (food industry): 60 x 4 mm<br/>brass soft: 60 x 4 mm<br/>hard copper and aluminium: 64 x 4 mm<br/>soft copper: 64 x 4 mm<br/>conduit-rohr (taz): 60 x 4 mm<br/>mepla, gebereit and similar: 50 x 4 mm<br/>roundbar solid (s275jo): 35 mm<br/>squarebar solid (s275jo): 30 x 30 mm <br/>flatsteel solid (s275jo): 10 x 60 mm<br/>square profile (s275jo): 25 x 50 x 3 mm respectively 50 x 50 x 3 mm <br/>t-profile (s275jo): 50 x 50 x 6 mm<br/>u-profile (s275jo): 40 x 20 x 6 mm<br/>maximum bending radius: 300 mm<br/>minimum bending radius: 10 mm<br/>maximum bending angle: 180° <br/>motor power: 380v / 1,5kw <br/>length: 595 mm <br/>width: 363 mm <br/>heigt: 900 mm <br/>weight: 130 kg<br/><br/><br/><br/> : 60 X 3 MM
: 60 X 4 MM
: 64 X 4 MM
: 64 X 3 MM
: 60 X 4 MM
: 60 X 4 MM
: 64 X 4 MM
: 64 X 4 MM
: 60 X 4 MM
: 50 X 4 MM
: 35 MM
: 30 X 30 MM
: 10 X 60 MM
: 50 X 50 X 6 MM
: 40 X 20 X 6 MM
: 300 MM
: 10 MM
: 180 °
: 595 MM
: 363 MM
: 900 MM
: 130 KG
MANUAL CLAMPING ELECTRONIC PRESELECTION OF BENDING ANGLE OVERLOAD PROTECTION MOBILE BY ROLLS AND HANDLE

INCL. FOLLOWING TOOL:

STEEL FORMER DM.  1 1/4",  R 90 MM
COUNTERBENDING BRASS DIE 1 1/4",


ALTERNATIVE:

MODEL TOPBENDER 050 T            EURO   9.000,--

- 2 SPEEDS 1,25 / 2,5 U/MIN
- PC BOARD WITH 8 GROUPS EACH 9 STEPS
- ENCODER TO READ THE PRESSURE DIE POSITION
- STANDARD WITHOUT TOOLS

MAX. CAPACITY:
GAS TUBE: 2", GAS X 4 MM
STANDARD STEEL TUBE: 60 X 3 MM
FURNITURE TUBE: 60 X 4 MM
FE35 (FOR HYDRAULIC TUBES): 64 X 4 MM
STAINLESS STEEL AISI304-316: 64 X 3 MM
STAINLESS STEEL AISI308 (FOOD INDUSTRY): 60 X 4 MM
BRASS SOFT: 60 X 4 MM
HARD COPPER AND ALUMINIUM: 64 X 4 MM
SOFT COPPER: 64 X 4 MM
CONDUIT-ROHR (TAZ): 60 X 4 MM
MEPLA, GEBEREIT AND SIMILAR: 50 X 4 MM
ROUNDBAR SOLID (S275JO): 35 MM
SQUAREBAR SOLID (S275JO): 30 X 30 MM
FLATSTEEL SOLID (S275JO): 10 X 60 MM
SQUARE PROFILE (S275JO): 25 X 50 X 3 MM RESPECTIVELY 50 X 50 X 3 MM
T-PROFILE (S275JO): 50 X 50 X 6 MM
U-PROFILE (S275JO): 40 X 20 X 6 MM
MAXIMUM BENDING RADIUS: 300 MM
MINIMUM BENDING RADIUS: 10 MM
MAXIMUM BENDING ANGLE: 180°
MOTOR POWER: 380V / 1,5KW
LENGTH: 595 MM
WIDTH: 363 MM
HEIGT: 900 MM
WEIGHT: 130 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-well-known brand weima

technical parameters:

-main motor power 18.5 kw
-engine power from the hydraulic pump 0, 75kw

-automatic autorewers
-pull hydraulic

-the rotor length 1000 mm
-rotation 90 u/min
-multiple staggered knife shaft set 23
-dimensions: 30 mm x 30 mm
-sieve fi 25 mm
-flat blades

-diameter suction fi 200 mm
-rotor diameter 185 mm
-the height of the drawer release 185 mm
-the length of the drawer pressure 850 mm

overall dimensions of the machine:

-length: 240 cm
-width: 160 cm
-height 180 cm

-weight of 1900 kg

wood chipper can process a wide range of wood waste, which accumulate, for example. in industrial applications or carpentry workshops, saw mills or in the furniture industry. this list includes pallets and boxes, as well as long and short scrap of wood, veneer, chipboard, fibreboard, plywood and joiner's products, such as large furniture, window profiles, doors and stairs.

the main features of the machine:

* robust construction
* a reputable german brand weima
* the leader among manufacturers of chippers
the commendable
* for each professional

patented v rotor

-the optimum supply of material
-minimum cutter wear
– small power consumption at high performance
is a small gap between the rotor and blades kontruj?cymi
-defined issue knife

contoured v rotor is made of die-cast and placed on a stable bearings
on its perimeter welded are special grips knife in his pockets
in them are cutting knives and bolted
this enables fast replacement blades
thanks to this design during the shredding material screws are damaged
recessed cutting blades have 4 cutting edges, which can be 4 x turn,
providing precise cutting with high performance. -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -WELL-KNOWN BRAND WEIMA TECHNICAL PARAMETERS: -MAIN MOTOR POWER 18.5 KW -ENGINE POWER FROM THE HYDRAULIC PUMP 0, 75KW -AUTOMATIC AUTOREWERS -PULL HYDRAULIC -THE ROTOR LENGTH 1000 MM -ROTATION 90 U/MIN -MULTIPLE STAGGERED KNIFE SHAFT SET 23 -DIMENSIONS: 30 MM X 30 MM -SIEVE FI 25 MM -FLAT BLADES -DIAMETER SUCTION FI 200 MM -ROTOR DIAMETER 185 MM -THE HEIGHT OF THE DRAWER RELEASE 185 MM -THE LENGTH OF THE DRAWER PRESSURE 850 MM OVERALL DIMENSIONS OF THE MACHINE: -LENGTH: 240 CM -WIDTH: 160 CM -HEIGHT 180 CM -WEIGHT OF 1900 KG WOOD CHIPPER CAN PROCESS A WIDE RANGE OF WOOD WASTE, WHICH ACCUMULATE, FOR EXAMPLE. IN INDUSTRIAL APPLICATIONS OR CARPENTRY WORKSHOPS, SAW MILLS OR IN THE FURNITURE INDUSTRY. THIS LIST INCLUDES PALLETS AND BOXES, AS WELL AS LONG AND SHORT SCRAP OF WOOD, VENEER, CHIPBOARD, FIBREBOARD, PLYWOOD AND JOINER'S PRODUCTS, SUCH AS LARGE FURNITURE, WINDOW PROFILES, DOORS AND STAIRS. THE MAIN FEATURES OF THE MACHINE: * ROBUST CONSTRUCTION * A REPUTABLE GERMAN BRAND WEIMA * THE LEADER AMONG MANUFACTURERS OF CHIPPERS THE COMMENDABLE * FOR EACH PROFESSIONAL PATENTED V ROTOR -THE OPTIMUM SUPPLY OF MATERIAL -MINIMUM CUTTER WEAR – SMALL POWER CONSUMPTION AT HIGH PERFORMANCE IS A SMALL GAP BETWEEN THE ROTOR AND BLADES KONTRUJ?CYMI -DEFINED ISSUE KNIFE CONTOURED V ROTOR IS MADE OF DIE-CAST AND PLACED ON A STABLE BEARINGS ON ITS PERIMETER WELDED ARE SPECIAL GRIPS KNIFE IN HIS POCKETS IN THEM ARE CUTTING KNIVES AND BOLTED THIS ENABLES FAST REPLACEMENT BLADES THANKS TO THIS DESIGN DURING THE SHREDDING MATERIAL SCREWS ARE DAMAGED RECESSED CUTTING BLADES HAVE 4 CUTTING EDGES, WHICH CAN BE 4 X TURN, PROVIDING PRECISE CUTTING WITH HIGH PERFORMANCE.
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-serial number: 14200 <br/>weight approx.: 16000 kg<br/>control: imatronic <br/>dimensions (l x w x h) approx.: 27200 x 2450 x 2700 mm<br/>feed: 6 - 30 m/min<br/>edge thickness: 1,3 / 3 mm<br/>workpiece thickness: 50 mm<br/>joint trimming unit: ja / yes <br/>snipping unit: ja / yes <br/>rough trimming unit: ja / yes <br/>fine trimming unit: ja / yes <br/>profile trimming unit: ja / yes <br/>universal trimming unit: nein / no <br/>edge sanding unit: nein / no <br/>flat scraping unit: ja / yes <br/>profile scraping unit: ja / yes <br/>edge buffing unit: ja / yes <br/>refeed system: ja / yes <br/>total power approx: 49 kw<br/>edge magazine with: 32    - 8 x max.3 mm / 24 x max.1,3 mm -fold roller<br/>workpiece pre heater: ja / yes <br/>workpiece width min.: 80 mm<br/>description: <b>well maintained, high quality ima combima /i /r75 / 885 edgebander with feedback system</b><br> <br> ? left machine<br> ? edge thickness max. 1,3 mm<br> ? edge height max. 50 mm<br> ? thickness roll material max. 3 mm<br> ? workpiece length min. 168 mm<br> ? variable feed 6 - 30 m / min ? height adjustment with motor<br> ? belt upper pressure<br> ? preheating zone<br> ? joint trimming unit 2 motors each 4.5 kw<br> ? compact tensioner 2 motors each 6.6 kw<br> ? 32-fold roll magazine: 8 compartments up to 3 mm, 24 compartments up to 1.3 mm<br> ? glue container changeable<br> ? suitable for pur glue<br> ? spraying device<br> ? snipping unit unit 2 motors each 0,2 kw<br> ? flush cutting unit 2 motors each 1.0 kw<br> ? multiple machining unit (radius, chamfer, corner copying) 2 motors each 0.66 kw<br> ? 4 tool changing stations<br> ? surface scraper<br> ? profile scraper<br> ? buffing unit 2 motors each 0,25 kw<br> ? aggregates controlled via nc axes<br> ? automatic material feeder<br> ? quick lock system<br> ? control and software imatronic SERIAL NUMBER: 14200
WEIGHT APPROX.: 16000 KG
CONTROL: IMATRONIC
DIMENSIONS (L X W X H) APPROX.: 27200 X 2450 X 2700 MM
FEED: 6 - 30 M/MIN
EDGE THICKNESS: 1,3 / 3 MM
WORKPIECE THICKNESS: 50 MM
JOINT TRIMMING UNIT: JA / YES
SNIPPING UNIT: JA / YES
ROUGH TRIMMING UNIT: JA / YES
FINE TRIMMING UNIT: JA / YES
PROFILE TRIMMING UNIT: JA / YES
UNIVERSAL TRIMMING UNIT: NEIN / NO
EDGE SANDING UNIT: NEIN / NO
FLAT SCRAPING UNIT: JA / YES
PROFILE SCRAPING UNIT: JA / YES
EDGE BUFFING UNIT: JA / YES
REFEED SYSTEM: JA / YES
TOTAL POWER APPROX: 49 KW
EDGE MAGAZINE WITH: 32 - 8 X MAX.3 MM / 24 X MAX.1,3 MM -FOLD ROLLER
WORKPIECE PRE HEATER: JA / YES
WORKPIECE WIDTH MIN.: 80 MM
DESCRIPTION: WELL MAINTAINED, HIGH QUALITY IMA COMBIMA /I /R75 / 885 EDGEBANDER WITH FEEDBACK SYSTEM

? LEFT MACHINE
? EDGE THICKNESS MAX. 1,3 MM
? EDGE HEIGHT MAX. 50 MM
? THICKNESS ROLL MATERIAL MAX. 3 MM
? WORKPIECE LENGTH MIN. 168 MM
? VARIABLE FEED 6 - 30 M / MIN ? HEIGHT ADJUSTMENT WITH MOTOR
? BELT UPPER PRESSURE
? PREHEATING ZONE
? JOINT TRIMMING UNIT 2 MOTORS EACH 4.5 KW
? COMPACT TENSIONER 2 MOTORS EACH 6.6 KW
? 32-FOLD ROLL MAGAZINE: 8 COMPARTMENTS UP TO 3 MM, 24 COMPARTMENTS UP TO 1.3 MM
? GLUE CONTAINER CHANGEABLE
? SUITABLE FOR PUR GLUE
? SPRAYING DEVICE
? SNIPPING UNIT UNIT 2 MOTORS EACH 0,2 KW
? FLUSH CUTTING UNIT 2 MOTORS EACH 1.0 KW
? MULTIPLE MACHINING UNIT (RADIUS, CHAMFER, CORNER COPYING) 2 MOTORS EACH 0.66 KW
? 4 TOOL CHANGING STATIONS
? SURFACE SCRAPER
? PROFILE SCRAPER
? BUFFING UNIT 2 MOTORS EACH 0,25 KW
? AGGREGATES CONTROLLED VIA NC AXES
? AUTOMATIC MATERIAL FEEDER
? QUICK LOCK SYSTEM
? CONTROL AND SOFTWARE IMATRONIC
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more PRESS types: