761 ofertas

Año de construcción: usado
Ubicación: Land-empty bottle inspector heuft inline ebi with reflexx and spectrum tx units
 
the machine was installed in year 2007 and its currently in very good operational condition. the capacity is 72 000 bph. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. it has heuft pilot cd manuals in english
 
this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.
 
sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.
 
the ebi has optical heuft thread detection system which inspects the screw closure finish on a glass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.
 
this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.
 
technical data:
manufacturer: heuft gmbh, germany
year: 2007
type: heuft spectrum tx inline ebi with reflexx image processing and heuft syncron system
capacity: 72 000 bph
reliability: 99.9 % detection complete heuft manuals in english. EMPTY BOTTLE INSPECTOR HEUFT INLINE EBI WITH REFLEXX AND SPECTRUM TX UNITS THE MACHINE WAS INSTALLED IN YEAR 2007 AND ITS CURRENTLY IN VERY GOOD OPERATIONAL CONDITION. THE CAPACITY IS 72 000 BPH. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. IT HAS HEUFT PILOT CD MANUALS IN ENGLISH THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON A GLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 2007 TYPE: HEUFT SPECTRUM TX INLINE EBI WITH REFLEXX IMAGE PROCESSING AND HEUFT SYNCRON SYSTEM CAPACITY: 72 000 BPH RELIABILITY: 99.9 % DETECTION COMPLETE HEUFT MANUALS IN ENGLISH.
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 85 €
Ubicación: Land-weight approx.: 40 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 600 mm<br/>description: lot composed of:<br> two monitors<br>   three desktop computers <br> an a4 printer <br> a label printer<br> a projector<br> a fax machine <br> a dvd player<br> WEIGHT APPROX.: 40 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 600 MM
DESCRIPTION: LOT COMPOSED OF:
TWO MONITORS
THREE DESKTOP COMPUTERS
AN A4 PRINTER
A LABEL PRINTER
A PROJECTOR
A FAX MACHINE
A DVD PLAYER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-empty bottle inspector heuft inline ebi with reflexx and spectrum units

the machine was installed in year 2007 and its currently in very good operational condition, it has been last serviced and can be demonstrated to customers. the capacity is 60 000 bph. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. it has complete heuft manuals in english

this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.

sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.

the ebi has optical heuft thread detection system which inspects the screw closure finish on a glass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.

this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.

technical data:
manufacturer: heuft gmbh, germany
year: 9/2007
type: heuft inline ebi with reflexx image processing
model: h8 bsxt b 72
capacity: 60 000 bph
reliability: 99.9 % detection complete heuft manuals in english. this unit can be sold to the market.
total operating hours 12750
total on duty hours 27500 EMPTY BOTTLE INSPECTOR HEUFT INLINE EBI WITH REFLEXX AND SPECTRUM UNITS THE MACHINE WAS INSTALLED IN YEAR 2007 AND ITS CURRENTLY IN VERY GOOD OPERATIONAL CONDITION, IT HAS BEEN LAST SERVICED AND CAN BE DEMONSTRATED TO CUSTOMERS. THE CAPACITY IS 60 000 BPH. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. IT HAS COMPLETE HEUFT MANUALS IN ENGLISH THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON A GLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 9/2007 TYPE: HEUFT INLINE EBI WITH REFLEXX IMAGE PROCESSING MODEL: H8 BSXT B 72 CAPACITY: 60 000 BPH RELIABILITY: 99.9 % DETECTION COMPLETE HEUFT MANUALS IN ENGLISH. THIS UNIT CAN BE SOLD TO THE MARKET. TOTAL OPERATING HOURS 12750 TOTAL ON DUTY HOURS 27500
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 450 €
Ubicación: Land-weight approx.: 500 kg<br/>dimensions (l x w x h) approx.: 3500 x 1000 x 1000 mm<br/>description: projection approx. 3000 mm, max. load 500 kg, with floor remote control WEIGHT APPROX.: 500 KG
DIMENSIONS (L X W X H) APPROX.: 3500 X 1000 X 1000 MM
DESCRIPTION: PROJECTION APPROX. 3000 MM, MAX. LOAD 500 KG, WITH FLOOR REMOTE CONTROL
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-this inline heuft ebi was made in year 2007 and relocated in 2011. today it is still installed but not in use nor connected to the power. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. the capacity of this inline ebi is min 50 000 bph and equipment is in very good condition.

this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.

sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.

the ebi has optical heuft thread detection system which inspects the screw closure finish on aglass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.

this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.

technical data:
manufacturer: heuft gmbh, germany
year: 2007
type: heuft inline ebi with reflexx image processing
capacity: up to 70 000 bph
reliability: 99.9 % detection THIS INLINE HEUFT EBI WAS MADE IN YEAR 2007 AND RELOCATED IN 2011. TODAY IT IS STILL INSTALLED BUT NOT IN USE NOR CONNECTED TO THE POWER. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. THE CAPACITY OF THIS INLINE EBI IS MIN 50 000 BPH AND EQUIPMENT IS IN VERY GOOD CONDITION. THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON AGLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 2007 TYPE: HEUFT INLINE EBI WITH REFLEXX IMAGE PROCESSING CAPACITY: UP TO 70 000 BPH RELIABILITY: 99.9 % DETECTION
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 7.250 €
Ubicación: Land-weight approx.: 10000 kg<br/>dimensions (l x w x h) approx.: 10400 x 12900 x 2450 mm<br/>description: ? horizontal panel saw with lifter table, beam saw<br> ? serial number 531.00.450<br> ? total installed power 16 kw<br> ? cutting width approx. 4500 mm<br> ? cutting length approx. 4500 mm<br> ? saw blade projection approx. 115 mm<br> ? cutting height approx. 110 mm<br> ? 7 grippers<br> ? main saw blade: max. diameter 430 mm<br> ? scoring saw blade: max. diameter 300 mm and motor 2 kw<br> ? saw carriage feed speed: 1 - 130 m/min<br> ? saw carriage return speed: 130 m/min<br> ? pushers feed speed: 1 -60 m/min<br> ? pushers return speed: 60 m/min<br> ? front air tables covered by bakelite: 1 fixed and 3 movable<br> ? max. panel dimensions on platform approx. 4500 x 2150 mm<br> ? max. height of panel stack on platform 700 mm<br> ? max. weight supported by the lifting table 9000 kg<br> ? the loader rollers towards the lifting table are not included<br> ? numerical control nps 400<br> ? for more details see the photos WEIGHT APPROX.: 10000 KG
DIMENSIONS (L X W X H) APPROX.: 10400 X 12900 X 2450 MM
DESCRIPTION: ? HORIZONTAL PANEL SAW WITH LIFTER TABLE, BEAM SAW
? SERIAL NUMBER 531.00.450
? TOTAL INSTALLED POWER 16 KW
? CUTTING WIDTH APPROX. 4500 MM
? CUTTING LENGTH APPROX. 4500 MM
? SAW BLADE PROJECTION APPROX. 115 MM
? CUTTING HEIGHT APPROX. 110 MM
? 7 GRIPPERS
? MAIN SAW BLADE: MAX. DIAMETER 430 MM
? SCORING SAW BLADE: MAX. DIAMETER 300 MM AND MOTOR 2 KW
? SAW CARRIAGE FEED SPEED: 1 - 130 M/MIN
? SAW CARRIAGE RETURN SPEED: 130 M/MIN
? PUSHERS FEED SPEED: 1 -60 M/MIN
? PUSHERS RETURN SPEED: 60 M/MIN
? FRONT AIR TABLES COVERED BY BAKELITE: 1 FIXED AND 3 MOVABLE
? MAX. PANEL DIMENSIONS ON PLATFORM APPROX. 4500 X 2150 MM
? MAX. HEIGHT OF PANEL STACK ON PLATFORM 700 MM
? MAX. WEIGHT SUPPORTED BY THE LIFTING TABLE 9000 KG
? THE LOADER ROLLERS TOWARDS THE LIFTING TABLE ARE NOT INCLUDED
? NUMERICAL CONTROL NPS 400
? FOR MORE DETAILS SEE THE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905026
number: 1 pcs.
manufacturer: pero
type: v2/090-ex-7005
control: year of construction: 2011
state of preservation: second-hand machine
machine a (hours): 9.285
program run (hours): 612

description

divider agreement

cleaning medium and design

cleaning medium: modified alcohol
front loader

adsorption

adsorption unit (active carbon filter)

drying

vacuum drying

distillation

system distillation under vacuum
vacuum - distillation of the rest

goods movement

swivel
auger
rotation (interval rotation)
rotation (taktend rotating)
basket rotation direction control

flood creation

full bath
floods
torrent floods
steam degreasing

ultrasonic equipment

3600 kw
frequency hz 30000

filter

filter bag 0.050 mm
acid detector

loading

conveyor belt for the feed of work piece baskets
maximum basket or dimensions (lxwxh) approx. 660 x 480 x 300 mm
maximum weight per bin or 200 kg of part of

fire and explosion protection

more facilities

machine status light

comment

you like to receive more information about the austattungsdetails on request.

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour.   GENERAL PROJECT NO.: 905026 NUMBER: 1 PCS. MANUFACTURER: PERO TYPE: V2/090-EX-7005 CONTROL: YEAR OF CONSTRUCTION: 2011 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 9.285 PROGRAM RUN (HOURS): 612 DESCRIPTION DIVIDER AGREEMENT CLEANING MEDIUM AND DESIGN CLEANING MEDIUM: MODIFIED ALCOHOL FRONT LOADER ADSORPTION ADSORPTION UNIT (ACTIVE CARBON FILTER) DRYING VACUUM DRYING DISTILLATION SYSTEM DISTILLATION UNDER VACUUM VACUUM - DISTILLATION OF THE REST GOODS MOVEMENT SWIVEL AUGER ROTATION (INTERVAL ROTATION) ROTATION (TAKTEND ROTATING) BASKET ROTATION DIRECTION CONTROL FLOOD CREATION FULL BATH FLOODS TORRENT FLOODS STEAM DEGREASING ULTRASONIC EQUIPMENT 3600 KW FREQUENCY HZ 30000 FILTER FILTER BAG 0.050 MM ACID DETECTOR LOADING CONVEYOR BELT FOR THE FEED OF WORK PIECE BASKETS MAXIMUM BASKET OR DIMENSIONS (LXWXH) APPROX. 660 X 480 X 300 MM MAXIMUM WEIGHT PER BIN OR 200 KG OF PART OF FIRE AND EXPLOSION PROTECTION MORE FACILITIES MACHINE STATUS LIGHT COMMENT YOU LIKE TO RECEIVE MORE INFORMATION ABOUT THE AUSTATTUNGSDETAILS ON REQUEST. WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 800 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 4500 x 2000 x 1800 mm<br/>description: load capacity 1 t, projection 4000 mm, hook path 4000 mm, with floor remote control WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 4500 X 2000 X 1800 MM
DESCRIPTION: LOAD CAPACITY 1 T, PROJECTION 4000 MM, HOOK PATH 4000 MM, WITH FLOOR REMOTE CONTROL
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905027
number: 1 pcs.
manufacturer: dã?rr
type: ecocbase special 95 c.
control: siemens s7-300
construction year: 2014
state of preservation: second-hand machine
machine a (hours): 3.779
program run (hours): 385

description

divider agreement

cleaning medium and design

cleaning medium: chlorinated hydrocarbons (chcs)
front loader

drying

vacuum drying

distillation

goods movement

swivel
auger
spray

flood creation

steam degreasing

ultrasonic equipment

1000 kw
rate 25000 hz
filter bag for flood tank 1 0.200 mm
filter cartridge for flood tank 2 0.025 mm
maximum basket or dimensions (lxwxh) approx. 530 x 320 x 200 mm
maximum weight per bin or 50 kg of part of

general technical data

air connection 6 bar
total power consumption 22 kva

comment

you like to receive more information about the austattungsdetails on request.

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905027 NUMBER: 1 PCS. MANUFACTURER: D&ATILDE;?RR TYPE: ECOCBASE SPECIAL 95 C. CONTROL: SIEMENS S7-300 CONSTRUCTION YEAR: 2014 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 3.779 PROGRAM RUN (HOURS): 385 DESCRIPTION DIVIDER AGREEMENT CLEANING MEDIUM AND DESIGN CLEANING MEDIUM: CHLORINATED HYDROCARBONS (CHCS) FRONT LOADER DRYING VACUUM DRYING DISTILLATION GOODS MOVEMENT SWIVEL AUGER SPRAY FLOOD CREATION STEAM DEGREASING ULTRASONIC EQUIPMENT 1000 KW RATE 25000 HZ FILTER BAG FOR FLOOD TANK 1 0.200 MM FILTER CARTRIDGE FOR FLOOD TANK 2 0.025 MM MAXIMUM BASKET OR DIMENSIONS (LXWXH) APPROX. 530 X 320 X 200 MM MAXIMUM WEIGHT PER BIN OR 50 KG OF PART OF GENERAL TECHNICAL DATA AIR CONNECTION 6 BAR TOTAL POWER CONSUMPTION 22 KVA COMMENT YOU LIKE TO RECEIVE MORE INFORMATION ABOUT THE AUSTATTUNGSDETAILS ON REQUEST. WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 15000 kg<br/>dimensions (l x w x h) approx.: 12000 x 15000 x 2700 mm<br/>description: giben panel saw / angular system<br> serial number 050.07.440<br> loading platform size 5600 x 2200 mm<br> 1° machine cutting length 4400 mm<br> with 6 pushers<br> 2° machine cutting length 2200 mm<br> with 8 pushers<br> blade projection 105 mm<br> clamp opening 117 mm<br> min alignable width 80 mm<br> blades diameter 390 mm<br> blades shaft 80 mm<br> trimmer diameter 200 mm<br> trimmer shaft 50 mm WEIGHT APPROX.: 15000 KG
DIMENSIONS (L X W X H) APPROX.: 12000 X 15000 X 2700 MM
DESCRIPTION: GIBEN PANEL SAW / ANGULAR SYSTEM
SERIAL NUMBER 050.07.440
LOADING PLATFORM SIZE 5600 X 2200 MM
1° MACHINE CUTTING LENGTH 4400 MM
WITH 6 PUSHERS
2° MACHINE CUTTING LENGTH 2200 MM
WITH 8 PUSHERS
BLADE PROJECTION 105 MM
CLAMP OPENING 117 MM
MIN ALIGNABLE WIDTH 80 MM
BLADES DIAMETER 390 MM
BLADES SHAFT 80 MM
TRIMMER DIAMETER 200 MM
TRIMMER SHAFT 50 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905016
number: 1 pcs.
manufacturer: sw (swabian machine tools)
type: ba w06-22
control: siemens 840 d powerline
year of construction: 2012
state of preservation: second-hand machine
stories about: 2-3 layers

description

milling

travel in x 600 mm
travel in y (875) 600 mm
travel in z 500 mm
maximum rapid traverse in x/y/z 100/100/100 m / min
maximum acceleration in x/y/z 12/10/20 m / s2
feed force in the x/y/z 10000/10000 / 2 ã? 5000 n
direct measuring system x/y/z/a(u)/c1(c2)/w1(w2)
linear actuator x/y/z
tool holder hsk-a 63
maximum speed milling spindle 17500 1/min
maximum power with ed 10-40 / 100% 35/26 kw
maximum torque at ed 10-40 / 100% 80/60 nm
spindle diameter in front bearing 80 mm
horizontally arranged 2 pcs. spindle
spindle distance 600 mm
pneumatic tool system control
pneumatic tool taper cleaning in milling spindle
chain-type tool magazine 2 ã? 42 stations
max tool diameter 80 mm
max tool diameter when free neighbouring seats 160 mm
maximum tool length 350 mm
maximum tool weight 10 kg
rotary pallet changer 2 fold
maximum workpiece weight per pallet of 600 kg
2 stk. swivel unit for clamping bridge
swivel unit nc-controlled
8 pcs. nc-controlled rotary table (5 axis, torqueantrieb) - 4 pcs. per swivel unit
rotary table diameter 240 mm
bridges measure 1430 mm
2 set clamping bridge conditions
clamping hydraulics 250 bar
4 pcs. additional clamping circuit

more facilities

ir workpiece measuring probes
tool breakage control by means of laser
tool breakage monitoring toolinspect
splash panel with fully encapsulated workspace
automatic loading door
lighting in the work area
oil / emulsion mist extraction system
scratch band conveyors
discharge height chip conveyor 1100 mm
machine is / was operated with emulsion
internal coolant supply
coolant system with paper band filter
coolant cooling
high pressure pump 70 bar
modem for remote diagnostics and teleservice
thread cutting without compensating chuck
machine status light

general technical data

air supply 7 bar
operating voltage 3 x 400 / 50 v/hz
total power demand 133 kva
transport dimensions of the machine (lxwxh) approx. 3680 x 5400 x 3250 mm
floor space of throughout the facility lxwxh) approx. 4800 x 7500 x 3300 mm
machine weight 20000 kg

comment

a spindle and roles in the chain magazine new in 2019.
commissioning in 2013.

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905016 NUMBER: 1 PCS. MANUFACTURER: SW (SWABIAN MACHINE TOOLS) TYPE: BA W06-22 CONTROL: SIEMENS 840 D POWERLINE YEAR OF CONSTRUCTION: 2012 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 2-3 LAYERS DESCRIPTION MILLING TRAVEL IN X 600 MM TRAVEL IN Y (875) 600 MM TRAVEL IN Z 500 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 100/100/100 M / MIN MAXIMUM ACCELERATION IN X/Y/Z 12/10/20 M / S2 FEED FORCE IN THE X/Y/Z 10000/10000 / 2 &ATILDE;? 5000 N DIRECT MEASURING SYSTEM X/Y/Z/A(U)/C1(C2)/W1(W2) LINEAR ACTUATOR X/Y/Z TOOL HOLDER HSK-A 63 MAXIMUM SPEED MILLING SPINDLE 17500 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 35/26 KW MAXIMUM TORQUE AT ED 10-40 / 100% 80/60 NM SPINDLE DIAMETER IN FRONT BEARING 80 MM HORIZONTALLY ARRANGED 2 PCS. SPINDLE SPINDLE DISTANCE 600 MM PNEUMATIC TOOL SYSTEM CONTROL PNEUMATIC TOOL TAPER CLEANING IN MILLING SPINDLE CHAIN-TYPE TOOL MAGAZINE 2 &ATILDE;? 42 STATIONS MAX TOOL DIAMETER 80 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 160 MM MAXIMUM TOOL LENGTH 350 MM MAXIMUM TOOL WEIGHT 10 KG ROTARY PALLET CHANGER 2 FOLD MAXIMUM WORKPIECE WEIGHT PER PALLET OF 600 KG 2 STK. SWIVEL UNIT FOR CLAMPING BRIDGE SWIVEL UNIT NC-CONTROLLED 8 PCS. NC-CONTROLLED ROTARY TABLE (5 AXIS, TORQUEANTRIEB) - 4 PCS. PER SWIVEL UNIT ROTARY TABLE DIAMETER 240 MM BRIDGES MEASURE 1430 MM 2 SET CLAMPING BRIDGE CONDITIONS CLAMPING HYDRAULICS 250 BAR 4 PCS. ADDITIONAL CLAMPING CIRCUIT MORE FACILITIES IR WORKPIECE MEASURING PROBES TOOL BREAKAGE CONTROL BY MEANS OF LASER TOOL BREAKAGE MONITORING TOOLINSPECT SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC LOADING DOOR LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM SCRATCH BAND CONVEYORS DISCHARGE HEIGHT CHIP CONVEYOR 1100 MM MACHINE IS / WAS OPERATED WITH EMULSION INTERNAL COOLANT SUPPLY COOLANT SYSTEM WITH PAPER BAND FILTER COOLANT COOLING HIGH PRESSURE PUMP 70 BAR MODEM FOR REMOTE DIAGNOSTICS AND TELESERVICE THREAD CUTTING WITHOUT COMPENSATING CHUCK MACHINE STATUS LIGHT GENERAL TECHNICAL DATA AIR SUPPLY 7 BAR OPERATING VOLTAGE 3 X 400 / 50 V/HZ TOTAL POWER DEMAND 133 KVA TRANSPORT DIMENSIONS OF THE MACHINE (LXWXH) APPROX. 3680 X 5400 X 3250 MM FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 4800 X 7500 X 3300 MM MACHINE WEIGHT 20000 KG COMMENT A SPINDLE AND ROLES IN THE CHAIN MAGAZINE NEW IN 2019. COMMISSIONING IN 2013. WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 6000 x 15000 x 2400 mm<br/>description: machining center for panels edgebanding<br> working size 8000 x 2000 mm<br> for hsk 63f cones<br> 2x electrospindles with c-axis<br> power 12 kw each<br> max speed 18.000 rpm<br> drilling head with 17 spindles<br> 6 spindles on y-axis<br> 11 spindles on x-axis<br> wheelbase 32 mm<br> 2x tool changers with 12 positions each<br> edgebanding:<br> band height 16 - 45 mm<br> band thickness 0.4 - 3 mm<br> min inner diameter 50 mm<br> min outer diameter 25 mm<br> gluing speed 5 - 20 m/min<br> gluing unit<br> trimming unit with scraper<br> blade unit<br> diamond milling tool<br> 2x siemens vacuum pumps<br> laser profile projectors for pieces positioning WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 6000 X 15000 X 2400 MM
DESCRIPTION: MACHINING CENTER FOR PANELS EDGEBANDING
WORKING SIZE 8000 X 2000 MM
FOR HSK 63F CONES
2X ELECTROSPINDLES WITH C-AXIS
POWER 12 KW EACH
MAX SPEED 18.000 RPM
DRILLING HEAD WITH 17 SPINDLES
6 SPINDLES ON Y-AXIS
11 SPINDLES ON X-AXIS
WHEELBASE 32 MM
2X TOOL CHANGERS WITH 12 POSITIONS EACH
EDGEBANDING:
BAND HEIGHT 16 - 45 MM
BAND THICKNESS 0.4 - 3 MM
MIN INNER DIAMETER 50 MM
MIN OUTER DIAMETER 25 MM
GLUING SPEED 5 - 20 M/MIN
GLUING UNIT
TRIMMING UNIT WITH SCRAPER
BLADE UNIT
DIAMOND MILLING TOOL
2X SIEMENS VACUUM PUMPS
LASER PROFILE PROJECTORS FOR PIECES POSITIONING
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905029
number: 1 pcs.
manufacturer: gildemeister
type: twin 65 rg2
control: siemens 840 d powerline
year of construction: 2008
state of preservation: second-hand machine
machine a (hours): 52.400
spindle a (hours): 23,800

description

turning

maximum turning diameter 200 mm
maximum swing over bed cover 250 mm
maximum chuck diameter 250 mm
max speed main spindle 5000 1/min
maximum performance main spindle in ed 10-40 / 100% 37/25 kw
maximum torque of main spindle in ed 10-40 / 100% 390/270 nm
main spindle spindle passage 65 mm
spindle diameter in front bearing spindle 120 mm
spindle flange size main spindle 170 h 5
hollow clamping cylinder to the main spindle
maximum speed 5000 1/min spindle
maximum performance counter spindle in ed 10-40 / 100% 37/25 kw
max torque spindle in ed 10-40 / 100% 390/270 nm
spindle passage sub-spindle 65 mm
spindle diameter in front bearing spindle 120 mm
spindle flange size counter spindle 170 h 5
tailstock to counter spindle unit in the x direction of movable
tailstock quill stroke 300 mm
tailstock quill printing 600 dan

turret top
number of stations of which powered 12/12
in the revolver capto tool holder
the revolver x/y/z axes

gun down
number of stations of which powered 12/12
in the revolver capto tool holder
the turret of x/z axes
maximum rapid traverse in x/y/z 30 /-/ 30 m / min

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
oil / emulsion mist extraction system
chip conveyor
machine is / was operated with emulsion
coolant system with paper band filter
high pressure pump 20 bar
the belt of part of
precast acceptance facility
bar loader/bar feeder irco breuning profimat
max bar diameter 65 mm
maximum rod length 3000 mm

accessories

pcs. collet chuck mm
1 set of tool holder for rotary tools
1 set of tool holders for driven tools
1 set of guide tubes

general technical data

machine dimensions (lxwxh) approx. 4940 x 3000 x 2488 mm
machine weight 10000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905029 NUMBER: 1 PCS. MANUFACTURER: GILDEMEISTER TYPE: TWIN 65 RG2 CONTROL: SIEMENS 840 D POWERLINE YEAR OF CONSTRUCTION: 2008 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 52.400 SPINDLE A (HOURS): 23,800 DESCRIPTION TURNING MAXIMUM TURNING DIAMETER 200 MM MAXIMUM SWING OVER BED COVER 250 MM MAXIMUM CHUCK DIAMETER 250 MM MAX SPEED MAIN SPINDLE 5000 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 37/25 KW MAXIMUM TORQUE OF MAIN SPINDLE IN ED 10-40 / 100% 390/270 NM MAIN SPINDLE SPINDLE PASSAGE 65 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 120 MM SPINDLE FLANGE SIZE MAIN SPINDLE 170 H 5 HOLLOW CLAMPING CYLINDER TO THE MAIN SPINDLE MAXIMUM SPEED 5000 1/MIN SPINDLE MAXIMUM PERFORMANCE COUNTER SPINDLE IN ED 10-40 / 100% 37/25 KW MAX TORQUE SPINDLE IN ED 10-40 / 100% 390/270 NM SPINDLE PASSAGE SUB-SPINDLE 65 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 120 MM SPINDLE FLANGE SIZE COUNTER SPINDLE 170 H 5 TAILSTOCK TO COUNTER SPINDLE UNIT IN THE X DIRECTION OF MOVABLE TAILSTOCK QUILL STROKE 300 MM TAILSTOCK QUILL PRINTING 600 DAN TURRET TOP NUMBER OF STATIONS OF WHICH POWERED 12/12 IN THE REVOLVER CAPTO TOOL HOLDER THE REVOLVER X/Y/Z AXES GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 12/12 IN THE REVOLVER CAPTO TOOL HOLDER THE TURRET OF X/Z AXES MAXIMUM RAPID TRAVERSE IN X/Y/Z 30 /-/ 30 M / MIN MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM CHIP CONVEYOR MACHINE IS / WAS OPERATED WITH EMULSION COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 20 BAR THE BELT OF PART OF PRECAST ACCEPTANCE FACILITY BAR LOADER/BAR FEEDER IRCO BREUNING PROFIMAT MAX BAR DIAMETER 65 MM MAXIMUM ROD LENGTH 3000 MM ACCESSORIES PCS. COLLET CHUCK MM 1 SET OF TOOL HOLDER FOR ROTARY TOOLS 1 SET OF TOOL HOLDERS FOR DRIVEN TOOLS 1 SET OF GUIDE TUBES GENERAL TECHNICAL DATA MACHINE DIMENSIONS (LXWXH) APPROX. 4940 X 3000 X 2488 MM MACHINE WEIGHT 10000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 220 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 10000 x 6000 x 2200 mm<br/>description: lot composed of:<br> one meeting desk size 2000 x 1100 x 730 mm.<br> 32 chairs for meeting room<br> 1 slide projector<br> 1 overhead projector<br> other devices WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 10000 X 6000 X 2200 MM
DESCRIPTION: LOT COMPOSED OF:
ONE MEETING DESK SIZE 2000 X 1100 X 730 MM.
32 CHAIRS FOR MEETING ROOM
1 SLIDE PROJECTOR
1 OVERHEAD PROJECTOR
OTHER DEVICES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905018
number: 1 pcs.
manufacturer: mã?ga
type: t6 twin turn
control: mitsubishi m 80
year of constr.: 2017
state of preservation: second-hand machine
stories about: 1 layers

description

turning

4-axis
maximum swing over bed 400 mm
maximum chuck diameter 210 mm
max speed main spindle 3000 1/min
maximum performance main spindle in ed 10-40 / 100% 11 kw
main spindle spindle passage 65 mm
axes on the main spindle unit c
hollow clamping cylinder to the main spindle
max speed 4000 1/min spindle
maximum performance counter spindle in ed 10-40 / 100% 3,7 kw
counter spindle spindle forward 32 mm
axis counter spindle unit c/z1
travel in x/y/z counter spindle unit- / -/ 300 mm
maximum rapid traverse in x/y/z counter spindle unit- / -/ 30 m / min
coolant through the spindle
werkstã¼ckausstosser in the counter spindle

turret top
number of stations of which powered 12/12
tool holder in the revolver bmt 55
speed tool drive 5000 1/min
the turret of x/z axes
travel in x/y/z 200 /-/ 300 mm
maximum rapid traverse in x/y/z 20 /-/ 20 m / min

more facilities

lighting in the work area
chip conveyor
internal coolant supply
coolant system
high pressure pump 20 bar
the belt of part of
precast acceptance facility
bar loader/bar feeder
max bar diameter 5-60 mm
maximum rod length 1200 mm
electronic handwheel
machine status light
automatic central oil lubrication

accessories

12 pcs. tool holder for rotary tools

general technical data

machine dimensions (lxwxh) approx. 3480 x 1300 x 1850 mm
machine weight approx. 4000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905018 NUMBER: 1 PCS. MANUFACTURER: M&ATILDE;?GA TYPE: T6 TWIN TURN CONTROL: MITSUBISHI M 80 YEAR OF CONSTR.: 2017 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 1 LAYERS DESCRIPTION TURNING 4-AXIS MAXIMUM SWING OVER BED 400 MM MAXIMUM CHUCK DIAMETER 210 MM MAX SPEED MAIN SPINDLE 3000 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 11 KW MAIN SPINDLE SPINDLE PASSAGE 65 MM AXES ON THE MAIN SPINDLE UNIT C HOLLOW CLAMPING CYLINDER TO THE MAIN SPINDLE MAX SPEED 4000 1/MIN SPINDLE MAXIMUM PERFORMANCE COUNTER SPINDLE IN ED 10-40 / 100% 3,7 KW COUNTER SPINDLE SPINDLE FORWARD 32 MM AXIS COUNTER SPINDLE UNIT C/Z1 TRAVEL IN X/Y/Z COUNTER SPINDLE UNIT- / -/ 300 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z COUNTER SPINDLE UNIT- / -/ 30 M / MIN COOLANT THROUGH THE SPINDLE WERKST&ATILDE;&FRAC14;CKAUSSTOSSER IN THE COUNTER SPINDLE TURRET TOP NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE REVOLVER BMT 55 SPEED TOOL DRIVE 5000 1/MIN THE TURRET OF X/Z AXES TRAVEL IN X/Y/Z 200 /-/ 300 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 20 /-/ 20 M / MIN MORE FACILITIES LIGHTING IN THE WORK AREA CHIP CONVEYOR INTERNAL COOLANT SUPPLY COOLANT SYSTEM HIGH PRESSURE PUMP 20 BAR THE BELT OF PART OF PRECAST ACCEPTANCE FACILITY BAR LOADER/BAR FEEDER MAX BAR DIAMETER 5-60 MM MAXIMUM ROD LENGTH 1200 MM ELECTRONIC HANDWHEEL MACHINE STATUS LIGHT AUTOMATIC CENTRAL OIL LUBRICATION ACCESSORIES 12 PCS. TOOL HOLDER FOR ROTARY TOOLS GENERAL TECHNICAL DATA MACHINE DIMENSIONS (LXWXH) APPROX. 3480 X 1300 X 1850 MM MACHINE WEIGHT APPROX. 4000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 21.000 €
Ubicación: Land-weight approx.: 7500 kg<br/>dimensions (l x w x h) approx.: 9000 x 2450 x 2000 mm<br/>description: machine number 51560, total connected load 28 kw, cutting length 4,450 mm, cutting width approx. 3000 mm, 21 hp main saw motor, 3.6 hp scorer motor, projection of the main saw 107 mm, forward speed of the saw carriage 5-100 m / min, return 100 m / min, max , speed ??of the slider 80 m / min, 7 collets with an opening up to 127 mm,, automatic collet rear, 5 to 4.450 x 2.200 mm, lateral aligner WEIGHT APPROX.: 7500 KG
DIMENSIONS (L X W X H) APPROX.: 9000 X 2450 X 2000 MM
DESCRIPTION: MACHINE NUMBER 51560, TOTAL CONNECTED LOAD 28 KW, CUTTING LENGTH 4,450 MM, CUTTING WIDTH APPROX. 3000 MM, 21 HP MAIN SAW MOTOR, 3.6 HP SCORER MOTOR, PROJECTION OF THE MAIN SAW 107 MM, FORWARD SPEED OF THE SAW CARRIAGE 5-100 M / MIN, RETURN 100 M / MIN, MAX , SPEED ??OF THE SLIDER 80 M / MIN, 7 COLLETS WITH AN OPENING UP TO 127 MM,, AUTOMATIC COLLET REAR, 5 TO 4.450 X 2.200 MM, LATERAL ALIGNER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905017
number: 1 pcs.
manufacturer: mã?ga
type: s 500
control: mitsubishi 64s
year of construction: 2004
state of preservation: second-hand machine
stories about: 2 layers

description

milling

travel in x 500 mm
travel in y 400 mm
travel in z 350 mm
maximum rapid traverse in x/y/z 36/36/30 m / min
tool holder bt 30
maximum speed milling spindle 15000 1/min
maximum power with ed 10-40 / 100% 3.7/2,2 kw
disc tool magazine 20 + 1 stations
max tool diameter 70 mm
maximum tool length 200 mm
maximum tool weight 3 kg
time for tool change 1.6 s
workpiece change table 2 fold
table size 600 ã? 400 mm
maximum workpiece weight per table 250 kg
clamping hydraulics 200 bar

more facilities

tool measurement by laser
splash panel with fully encapsulated workspace
lighting in the work area
oil / emulsion mist extraction system
chip conveyor
internal coolant supply
coolant gun
coolant system with paper band filter
high pressure pump 20 bar
rs 232 interface
thread cutting without compensating chuck
electronic handwheel
machine status light

general technical data

floor space of throughout the facility lxwxh) approx. 3625 x 2046 x 2370 mm
machine weight approx. 5250 kg

comment

new ball screws in x and z, as well as new werkzeugwechselgetreibe with double gripper in 2019.
we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905017 NUMBER: 1 PCS. MANUFACTURER: M&ATILDE;?GA TYPE: S 500 CONTROL: MITSUBISHI 64S YEAR OF CONSTRUCTION: 2004 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 2 LAYERS DESCRIPTION MILLING TRAVEL IN X 500 MM TRAVEL IN Y 400 MM TRAVEL IN Z 350 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 36/36/30 M / MIN TOOL HOLDER BT 30 MAXIMUM SPEED MILLING SPINDLE 15000 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 3.7/2,2 KW DISC TOOL MAGAZINE 20 + 1 STATIONS MAX TOOL DIAMETER 70 MM MAXIMUM TOOL LENGTH 200 MM MAXIMUM TOOL WEIGHT 3 KG TIME FOR TOOL CHANGE 1.6 S WORKPIECE CHANGE TABLE 2 FOLD TABLE SIZE 600 &ATILDE;? 400 MM MAXIMUM WORKPIECE WEIGHT PER TABLE 250 KG CLAMPING HYDRAULICS 200 BAR MORE FACILITIES TOOL MEASUREMENT BY LASER SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM CHIP CONVEYOR INTERNAL COOLANT SUPPLY COOLANT GUN COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 20 BAR RS 232 INTERFACE THREAD CUTTING WITHOUT COMPENSATING CHUCK ELECTRONIC HANDWHEEL MACHINE STATUS LIGHT GENERAL TECHNICAL DATA FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 3625 X 2046 X 2370 MM MACHINE WEIGHT APPROX. 5250 KG COMMENT NEW BALL SCREWS IN X AND Z, AS WELL AS NEW WERKZEUGWECHSELGETREIBE WITH DOUBLE GRIPPER IN 2019. WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 700 kg<br/>dimensions (l x w x h) approx.: 900 x 500 x 1800 mm<br/>description: country of origin switzerland WEIGHT APPROX.: 700 KG
DIMENSIONS (L X W X H) APPROX.: 900 X 500 X 1800 MM
DESCRIPTION: COUNTRY OF ORIGIN SWITZERLAND
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905010
number: 1 pcs.
manufacturer: lid maho
type: dmu 50 evolution
control: heidenhain tnc 430
year of construction: 2000
state of preservation: second-hand machine
machine a (hours): 68.062
program run (hours): 32.734
spindle a (hours): 4,000

description

milling

5-axis
travel in x 500 mm
travel in y 420 mm
travel in z 380 mm
maximum rapid traverse in x/y/z 50/50/50 m / min
direct measuring system x/y/z
toolholder sk 40
maximum speed milling spindle 18000 1/min
maximum power with ed 10-40 / 100% 35/25 kw
chain-type tool magazine 2 ã? 16 stations
rotary table
swivel unit nc-controlled
nc-controlled rotary table
diameter round table 500 x 380 mm

more facilities

tool measurement by laser
splash panel with fully encapsulated workspace
lighting in the work area
preparation for central oil / emulsion mist extraction system
hinged belt chip conveyor
internal coolant supply
coolant gun
coolant system with paper band filter
high pressure 40 bar
mode 4
electronic handwheel
cabinet cooler as alignment tool
automatic central lubrication

general technical data

floor space of throughout the facility lxwxh) approx. 5000 x 4600 x 2500 mm
machine weight 5500 kg

comment

new spindle in 2016

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905010 NUMBER: 1 PCS. MANUFACTURER: LID MAHO TYPE: DMU 50 EVOLUTION CONTROL: HEIDENHAIN TNC 430 YEAR OF CONSTRUCTION: 2000 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 68.062 PROGRAM RUN (HOURS): 32.734 SPINDLE A (HOURS): 4,000 DESCRIPTION MILLING 5-AXIS TRAVEL IN X 500 MM TRAVEL IN Y 420 MM TRAVEL IN Z 380 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 50/50/50 M / MIN DIRECT MEASURING SYSTEM X/Y/Z TOOLHOLDER SK 40 MAXIMUM SPEED MILLING SPINDLE 18000 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 35/25 KW CHAIN-TYPE TOOL MAGAZINE 2 &ATILDE;? 16 STATIONS ROTARY TABLE SWIVEL UNIT NC-CONTROLLED NC-CONTROLLED ROTARY TABLE DIAMETER ROUND TABLE 500 X 380 MM MORE FACILITIES TOOL MEASUREMENT BY LASER SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA PREPARATION FOR CENTRAL OIL / EMULSION MIST EXTRACTION SYSTEM HINGED BELT CHIP CONVEYOR INTERNAL COOLANT SUPPLY COOLANT GUN COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE 40 BAR MODE 4 ELECTRONIC HANDWHEEL CABINET COOLER AS ALIGNMENT TOOL AUTOMATIC CENTRAL LUBRICATION GENERAL TECHNICAL DATA FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 5000 X 4600 X 2500 MM MACHINE WEIGHT 5500 KG COMMENT NEW SPINDLE IN 2016 WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-make mondomix holland b.v., type a-05 mini compact + md 2.1 + mtm 369, no project 12351 / d 9100701.7/9013110.17, new 1991, foam mixer laboratory aerator (1x), material stainless steel , rotor/stator with pins , rotor sizes dia. 80x120mm, with jacket , with frequency controller , capacity 5-45 kg/hr, with pump , mounted on wheels , with switchgear , floorspace 1,8x1,0 m, total height 1,6 m, weight 400 kg, - with chiller and heater unitfoam mixersmixers > foam mixers what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE MONDOMIX HOLLAND B.V., TYPE A-05 MINI COMPACT + MD 2.1 + MTM 369, NO PROJECT 12351 / D 9100701.7/9013110.17, NEW 1991, FOAM MIXER LABORATORY AERATOR (1X), MATERIAL STAINLESS STEEL , ROTOR/STATOR WITH PINS , ROTOR SIZES DIA. 80X120MM, WITH JACKET , WITH FREQUENCY CONTROLLER , CAPACITY 5-45 KG/HR, WITH PUMP , MOUNTED ON WHEELS , WITH SWITCHGEAR , FLOORSPACE 1,8X1,0 M, TOTAL HEIGHT 1,6 M, WEIGHT 400 KG, - WITH CHILLER AND HEATER UNITFOAM MIXERSMIXERS > FOAM MIXERS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land- general

project no.: 905028
number: 1 pcs.
manufacturer: gildemeister
type: twin 65 rg2
control: siemens 840 d powerline
year of construction: 2008
state of preservation: second-hand machine
machine a (hours): 52.600
spindle a (hours): 19.200

description

turning

maximum turning diameter 200 mm
maximum swing over bed cover 250 mm
maximum chuck diameter 250 mm
max speed main spindle 5000 1/min
maximum performance main spindle in ed 10-40 / 100% 37/25 kw
maximum torque of main spindle in ed 10-40 / 100% 390/270 nm
main spindle spindle passage 65 mm
spindle diameter in front bearing spindle 120 mm
spindle flange size main spindle 170 h 5
hollow clamping cylinder to the main spindle
maximum speed 5000 1/min spindle
maximum performance counter spindle in ed 10-40 / 100% 37/25 kw
max torque spindle in ed 10-40 / 100% 390/270 nm
spindle passage sub-spindle 65 mm
spindle diameter in front bearing spindle 120 mm
spindle flange size counter spindle 170 h 5
tailstock to counter spindle unit in the x direction of movable
tailstock quill stroke 300 mm
tailstock quill printing 600 dan

turret top
number of stations of which powered 12/12
tool holder in the vdi 40 turret
the revolver x/y/z axes

gun down
number of stations of which powered 12/12
tool holder in the vdi 40 turret
the turret of x/z axes
maximum rapid traverse in x/y/z 30 /-/ 30 m / min

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
oil / emulsion mist extraction system
chip conveyor
machine is / was operated with emulsion
coolant system with paper band filter
high pressure pump 20 bar
the belt of part of
precast acceptance facility
bar loader/bar feeder irco breuning profimat
max bar diameter 65 mm
maximum rod length 3000 mm

accessories

pcs. collet chuck mm
1 set of tool holder for rotary tools
1 set of tool holders for driven tools
1 set of guide tubes

general technical data

machine dimensions (lxwxh) approx. 4940 x 3000 x 2488 mm
machine weight 10000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905028 NUMBER: 1 PCS. MANUFACTURER: GILDEMEISTER TYPE: TWIN 65 RG2 CONTROL: SIEMENS 840 D POWERLINE YEAR OF CONSTRUCTION: 2008 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 52.600 SPINDLE A (HOURS): 19.200 DESCRIPTION TURNING MAXIMUM TURNING DIAMETER 200 MM MAXIMUM SWING OVER BED COVER 250 MM MAXIMUM CHUCK DIAMETER 250 MM MAX SPEED MAIN SPINDLE 5000 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 37/25 KW MAXIMUM TORQUE OF MAIN SPINDLE IN ED 10-40 / 100% 390/270 NM MAIN SPINDLE SPINDLE PASSAGE 65 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 120 MM SPINDLE FLANGE SIZE MAIN SPINDLE 170 H 5 HOLLOW CLAMPING CYLINDER TO THE MAIN SPINDLE MAXIMUM SPEED 5000 1/MIN SPINDLE MAXIMUM PERFORMANCE COUNTER SPINDLE IN ED 10-40 / 100% 37/25 KW MAX TORQUE SPINDLE IN ED 10-40 / 100% 390/270 NM SPINDLE PASSAGE SUB-SPINDLE 65 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 120 MM SPINDLE FLANGE SIZE COUNTER SPINDLE 170 H 5 TAILSTOCK TO COUNTER SPINDLE UNIT IN THE X DIRECTION OF MOVABLE TAILSTOCK QUILL STROKE 300 MM TAILSTOCK QUILL PRINTING 600 DAN TURRET TOP NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE VDI 40 TURRET THE REVOLVER X/Y/Z AXES GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE VDI 40 TURRET THE TURRET OF X/Z AXES MAXIMUM RAPID TRAVERSE IN X/Y/Z 30 /-/ 30 M / MIN MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM CHIP CONVEYOR MACHINE IS / WAS OPERATED WITH EMULSION COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 20 BAR THE BELT OF PART OF PRECAST ACCEPTANCE FACILITY BAR LOADER/BAR FEEDER IRCO BREUNING PROFIMAT MAX BAR DIAMETER 65 MM MAXIMUM ROD LENGTH 3000 MM ACCESSORIES PCS. COLLET CHUCK MM 1 SET OF TOOL HOLDER FOR ROTARY TOOLS 1 SET OF TOOL HOLDERS FOR DRIVEN TOOLS 1 SET OF GUIDE TUBES GENERAL TECHNICAL DATA MACHINE DIMENSIONS (LXWXH) APPROX. 4940 X 3000 X 2488 MM MACHINE WEIGHT 10000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 180 kg<br/>dimensions (l x w x h) approx.: 2000 x 950 x 1120 mm<br/>description: profile projector, diameter: 500 mm, table dim: 230 x 145 mm, episcopy - diascopy with lens, projection screen dimensions 550 mm, magnifications x10 x20 x20 x50 x100 x10, angular measuring capacity 5 , distortion of the objectives 0.05 %, passage under the lens with x20 236 mm, distance between lens axis and frame 140 mm, vertical table stroke 85 mm, measuring accuracy 0.001 mm WEIGHT APPROX.: 180 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 950 X 1120 MM
DESCRIPTION: PROFILE PROJECTOR, DIAMETER: 500 MM, TABLE DIM: 230 X 145 MM, EPISCOPY - DIASCOPY WITH LENS, PROJECTION SCREEN DIMENSIONS 550 MM, MAGNIFICATIONS X10 X20 X20 X50 X100 X10, ANGULAR MEASURING CAPACITY 5 , DISTORTION OF THE OBJECTIVES 0.05 %, PASSAGE UNDER THE LENS WITH X20 236 MM, DISTANCE BETWEEN LENS AXIS AND FRAME 140 MM, VERTICAL TABLE STROKE 85 MM, MEASURING ACCURACY 0.001 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
gwf-mengele gesenk bending press press hydraulic brake. nc/cnc pressbrake press press brake
type: h80-15
model: 1996

pressing force/pressure: 80 t - 800kn
bending length: 2550 mm
stand width: 2060 mm
control: dnc 800
backgauge - adjustable
table width: 240 mm
stand projection: 250 mm
maximum stroke: 200 mm
height: 450 mm
hoisting speed - down empty: 120 mm / s
hoisting speed â?? under load: 14 mm / s
hoisting speed - up empty: 105 mm / s
operating pressure: 235 bars
oil capacity: 250 l
total power: 11 kw
machine weight approx.: 8 t
space requirement approx.: 3,0 x 2,0 x 2,9 m
duration approx.: 17641 h much accessories/spare parts including lista cabinet 
 GWF-MENGELE GESENK BENDING PRESS PRESS HYDRAULIC BRAKE. NC/CNC PRESSBRAKE PRESS PRESS BRAKE TYPE: H80-15 MODEL: 1996 PRESSING FORCE/PRESSURE: 80 T - 800KN BENDING LENGTH: 2550 MM STAND WIDTH: 2060 MM CONTROL: DNC 800 BACKGAUGE - ADJUSTABLE TABLE WIDTH: 240 MM STAND PROJECTION: 250 MM MAXIMUM STROKE: 200 MM HEIGHT: 450 MM HOISTING SPEED - DOWN EMPTY: 120 MM / S HOISTING SPEED &ACIRC;?? UNDER LOAD: 14 MM / S HOISTING SPEED - UP EMPTY: 105 MM / S OPERATING PRESSURE: 235 BARS OIL CAPACITY: 250 L TOTAL POWER: 11 KW MACHINE WEIGHT APPROX.: 8 T SPACE REQUIREMENT APPROX.: 3,0 X 2,0 X 2,9 M DURATION APPROX.: 17641 H MUCH ACCESSORIES/SPARE PARTS INCLUDING LISTA CABINET
Vendedor: Herr Simsek
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 40 kg<br/>dimensions (l x w x h) approx.: 420 x 580 x 800 mm<br/>description: profile projector, magnifications: x10, height: 55 to 105mm, glass plate diameter: 70mm, projection screen dimensions: 340mm, screen width: 340mm, table surface: 220x220mm. stock number: 20878 WEIGHT APPROX.: 40 KG
DIMENSIONS (L X W X H) APPROX.: 420 X 580 X 800 MM
DESCRIPTION: PROFILE PROJECTOR, MAGNIFICATIONS: X10, HEIGHT: 55 TO 105MM, GLASS PLATE DIAMETER: 70MM, PROJECTION SCREEN DIMENSIONS: 340MM, SCREEN WIDTH: 340MM, TABLE SURFACE: 220X220MM. STOCK NUMBER: 20878
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905030
number: 1 pcs.
manufacturer: gildemeister
type: twin 32
control: siemens 840 d
year of construction: 2001
state of preservation: second-hand machine

description

turning

maximum turning diameter 145 mm
maximum chuck diameter 140 mm
max speed main spindle 1/min 8000
maximum performance main spindle in ed 10-40 / 100% 26 kw
main spindle spindle forward 32 mm
hollow clamping cylinder to the main spindle
maximum speed spindle 1/min 8000
maximum performance counter spindle in ed 10-40 / 100% 26 kw
counter spindle spindle forward 32 mm
tailstock to counter spindle unit in the x direction of movable

turret top
number of stations of which powered 12/12
tool holder in the turret vdi 25
speed tool drive 6000 1/min
the revolver x/y/z axes
maximum rapid traverse in x/y/z 30/30/30 m / min

gun down
number of stations of which powered 12/12
tool holder in the turret vdi 25
speed tool drive 6000 1/min
the turret of x/z axes
maximum rapid traverse in x/y/z 30 /-/ 30 m / min

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
oil / emulsion mist extraction system
chip conveyor
machine is / was operated with emulsion
coolant system with paper band filter
high pressure pump 20 bar
the belt of part of
precast acceptance facility
bar loader/bar feeder breuning irco
rod diameter 32 mm
maximum rod length 3000 mm

accessories

1 stk. collet chuck
1 set of tool holder for rotary tools
1 set of tool holders for driven tools
1 set of guide tubes

general technical data

machine dimensions (lxwxh) approx. 3910 x 2342 x 1985 mm
machine weight approx. 5000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905030 NUMBER: 1 PCS. MANUFACTURER: GILDEMEISTER TYPE: TWIN 32 CONTROL: SIEMENS 840 D YEAR OF CONSTRUCTION: 2001 STATE OF PRESERVATION: SECOND-HAND MACHINE DESCRIPTION TURNING MAXIMUM TURNING DIAMETER 145 MM MAXIMUM CHUCK DIAMETER 140 MM MAX SPEED MAIN SPINDLE 1/MIN 8000 MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 26 KW MAIN SPINDLE SPINDLE FORWARD 32 MM HOLLOW CLAMPING CYLINDER TO THE MAIN SPINDLE MAXIMUM SPEED SPINDLE 1/MIN 8000 MAXIMUM PERFORMANCE COUNTER SPINDLE IN ED 10-40 / 100% 26 KW COUNTER SPINDLE SPINDLE FORWARD 32 MM TAILSTOCK TO COUNTER SPINDLE UNIT IN THE X DIRECTION OF MOVABLE TURRET TOP NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE TURRET VDI 25 SPEED TOOL DRIVE 6000 1/MIN THE REVOLVER X/Y/Z AXES MAXIMUM RAPID TRAVERSE IN X/Y/Z 30/30/30 M / MIN GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE TURRET VDI 25 SPEED TOOL DRIVE 6000 1/MIN THE TURRET OF X/Z AXES MAXIMUM RAPID TRAVERSE IN X/Y/Z 30 /-/ 30 M / MIN MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM CHIP CONVEYOR MACHINE IS / WAS OPERATED WITH EMULSION COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 20 BAR THE BELT OF PART OF PRECAST ACCEPTANCE FACILITY BAR LOADER/BAR FEEDER BREUNING IRCO ROD DIAMETER 32 MM MAXIMUM ROD LENGTH 3000 MM ACCESSORIES 1 STK. COLLET CHUCK 1 SET OF TOOL HOLDER FOR ROTARY TOOLS 1 SET OF TOOL HOLDERS FOR DRIVEN TOOLS 1 SET OF GUIDE TUBES GENERAL TECHNICAL DATA MACHINE DIMENSIONS (LXWXH) APPROX. 3910 X 2342 X 1985 MM MACHINE WEIGHT APPROX. 5000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 5.000 €
Ubicación: Land-tramper techniek traysealer, type number: vts-3050, serial number: 001, project number: 996205, year of construction: 2005, 400 v, 6 bar, weight: 1600 kg, 2 lanes, dye: (8x) 130 mm x 100 mm, film width: 350 mm, total dimensions: 5800 mm x 1050 mm x 2100 mm, TRAMPER TECHNIEK TRAYSEALER, TYPE NUMBER: VTS-3050, SERIAL NUMBER: 001, PROJECT NUMBER: 996205, YEAR OF CONSTRUCTION: 2005, 400 V, 6 BAR, WEIGHT: 1600 KG, 2 LANES, DYE: (8X) 130 MM X 100 MM, FILM WIDTH: 350 MM, TOTAL DIMENSIONS: 5800 MM X 1050 MM X 2100 MM,
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-general

project no.: 905031
number: 1 pcs.
manufacturer: eumach
type: umc-1000
control: heidenhain itnc 530
construction year: 2014
state of preservation: second-hand machine
machine a (hours): 7,754
control a (hours): 8.331
program run (hours): 2.879
spindle a (hours): 2.471

description

milling

travel in x 1000 mm
travel in y 800 mm
travel in z 700 mm
maximum rapid traverse in x/y/z 24/24/24 m / min
maximum feed speed in x/y/z 20/20/20 m / min
direct measuring system x/y/z/c/b
tool holder hsk 63
maximum speed milling spindle 18000 1/min
maximum power with ed 10-40 / 100% 32/25 kw
maximum torque at ed 10-40 / 100% 154/124 nm
chain-type tool magazine 52 stations
max tool diameter 80 mm
max tool diameter when free neighbouring seats 120 mm
maximum tool length 300 mm
maximum tool weight 7 kg
tool change time 4 s
rotary table
swivel unit nc-controlled
nc-controlled rotary table
diameter round table 1000 ã? 800 mm
diameter range of work piece 1000 mm
maximum workpiece height 700 mm

more facilities

ir workpiece measuring probes
tool measurement by laser
splash panel with fully encapsulated workspace
lighting in the work area
chip conveyor
internal coolant supply
blowing air through the spindle
coolant system with paper band filter
high pressure 40 bar

accessories

100 pcs. tool holder for boring and milling tools (approx.)
1 stk. tool setting device

general technical data

machine weight approx. 15000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905031 NUMBER: 1 PCS. MANUFACTURER: EUMACH TYPE: UMC-1000 CONTROL: HEIDENHAIN ITNC 530 CONSTRUCTION YEAR: 2014 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 7,754 CONTROL A (HOURS): 8.331 PROGRAM RUN (HOURS): 2.879 SPINDLE A (HOURS): 2.471 DESCRIPTION MILLING TRAVEL IN X 1000 MM TRAVEL IN Y 800 MM TRAVEL IN Z 700 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 24/24/24 M / MIN MAXIMUM FEED SPEED IN X/Y/Z 20/20/20 M / MIN DIRECT MEASURING SYSTEM X/Y/Z/C/B TOOL HOLDER HSK 63 MAXIMUM SPEED MILLING SPINDLE 18000 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 32/25 KW MAXIMUM TORQUE AT ED 10-40 / 100% 154/124 NM CHAIN-TYPE TOOL MAGAZINE 52 STATIONS MAX TOOL DIAMETER 80 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 120 MM MAXIMUM TOOL LENGTH 300 MM MAXIMUM TOOL WEIGHT 7 KG TOOL CHANGE TIME 4 S ROTARY TABLE SWIVEL UNIT NC-CONTROLLED NC-CONTROLLED ROTARY TABLE DIAMETER ROUND TABLE 1000 &ATILDE;? 800 MM DIAMETER RANGE OF WORK PIECE 1000 MM MAXIMUM WORKPIECE HEIGHT 700 MM MORE FACILITIES IR WORKPIECE MEASURING PROBES TOOL MEASUREMENT BY LASER SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA CHIP CONVEYOR INTERNAL COOLANT SUPPLY BLOWING AIR THROUGH THE SPINDLE COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE 40 BAR ACCESSORIES 100 PCS. TOOL HOLDER FOR BORING AND MILLING TOOLS (APPROX.) 1 STK. TOOL SETTING DEVICE GENERAL TECHNICAL DATA MACHINE WEIGHT APPROX. 15000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 2.000 €
Ubicación: Land-tramper techniek denester, type number: mto-3080, serial number: 011, project number: 996206, year of construction: 2005, 400 v, 6 bar, weight: 350 kg, tray dimensions: (8x) 130 mm x 80 mm, total dimensions: 1400 mm x 1140 mm x 1960 mm, TRAMPER TECHNIEK DENESTER, TYPE NUMBER: MTO-3080, SERIAL NUMBER: 011, PROJECT NUMBER: 996206, YEAR OF CONSTRUCTION: 2005, 400 V, 6 BAR, WEIGHT: 350 KG, TRAY DIMENSIONS: (8X) 130 MM X 80 MM, TOTAL DIMENSIONS: 1400 MM X 1140 MM X 1960 MM,
Vendedor: Industrial Auctions BV
Año de construcción: usado
Precio: 225.000 USD
Ubicación: Land-rusoffer-046 

1.03mwe caterpillar g3516 [1287 kva x1] used containerized natural gas fueled power plant 2008ncy 400v 50hz ee35.4% 1500rpm 36000hrs since new refurbished and packaged 2013y 35700hrs exw russia.
 
rusoffers traders team [rott] has been looking for the strategic company partner (co-partner), which would have regular interest in acquisition and relocation of the above-mentioned used complete asset for fulfillment of turnkey decentralized power/energy generation project.

rott aimed to establish long term business relationship with co-partners specializing as the engineering company or epc-contractor engaged in next business areas: 
- oem independent service providers of complex services: design, equipment supply, construction, installation, commissioning and start up of gas fueled caterpillar generating sets and experienced in fulfillment of turnkey power/energy generation solutions;
- overhauling and refurbishment or operation and maintenance service providers, genset packagers, stockiests of caterpillar generating sets;
- independent power producers which own and operate similar power generation facilities - caterpillar power plants, developers/operators (boo) of caterpillar gensets.
 
rott is collecting non-obligatory bids, non-binding letters of intent for a purchase formally issued by prospective co-partners for contracting of the pre-owned used and overhauled caterpillar complete power plant. RUSOFFER-046 1.03MWE CATERPILLAR G3516 [1287 KVA X1] USED CONTAINERIZED NATURAL GAS FUELED POWER PLANT 2008NCY 400V 50HZ EE35.4% 1500RPM 36000HRS SINCE NEW REFURBISHED AND PACKAGED 2013Y 35700HRS EXW RUSSIA. RUSOFFERS TRADERS TEAM [ROTT] HAS BEEN LOOKING FOR THE STRATEGIC COMPANY PARTNER (CO-PARTNER), WHICH WOULD HAVE REGULAR INTEREST IN ACQUISITION AND RELOCATION OF THE ABOVE-MENTIONED USED COMPLETE ASSET FOR FULFILLMENT OF TURNKEY DECENTRALIZED POWER/ENERGY GENERATION PROJECT. ROTT AIMED TO ESTABLISH LONG TERM BUSINESS RELATIONSHIP WITH CO-PARTNERS SPECIALIZING AS THE ENGINEERING COMPANY OR EPC-CONTRACTOR ENGAGED IN NEXT BUSINESS AREAS: - OEM INDEPENDENT SERVICE PROVIDERS OF COMPLEX SERVICES: DESIGN, EQUIPMENT SUPPLY, CONSTRUCTION, INSTALLATION, COMMISSIONING AND START UP OF GAS FUELED CATERPILLAR GENERATING SETS AND EXPERIENCED IN FULFILLMENT OF TURNKEY POWER/ENERGY GENERATION SOLUTIONS; - OVERHAULING AND REFURBISHMENT OR OPERATION AND MAINTENANCE SERVICE PROVIDERS, GENSET PACKAGERS, STOCKIESTS OF CATERPILLAR GENERATING SETS; - INDEPENDENT POWER PRODUCERS WHICH OWN AND OPERATE SIMILAR POWER GENERATION FACILITIES - CATERPILLAR POWER PLANTS, DEVELOPERS/OPERATORS (BOO) OF CATERPILLAR GENSETS. ROTT IS COLLECTING NON-OBLIGATORY BIDS, NON-BINDING LETTERS OF INTENT FOR A PURCHASE FORMALLY ISSUED BY PROSPECTIVE CO-PARTNERS FOR CONTRACTING OF THE PRE-OWNED USED AND OVERHAULED CATERPILLAR COMPLETE POWER PLANT.
Vendedor: RUSOFFERS Co.
Año de construcción: usado
Precio: used machinery auction RESALE 2.000 €
Ubicación: Land-tramper techniek mobile denester, type number: mto-3080, serial number: 012, project number: 996206, year of construction: 2005, 400 v, 6 bar, weight: 350 kg, tray dimensions: (8x) 130 mm x 80 mm, total dimensions: 1400 mm x 1140 mm x 1960 mm, TRAMPER TECHNIEK MOBILE DENESTER, TYPE NUMBER: MTO-3080, SERIAL NUMBER: 012, PROJECT NUMBER: 996206, YEAR OF CONSTRUCTION: 2005, 400 V, 6 BAR, WEIGHT: 350 KG, TRAY DIMENSIONS: (8X) 130 MM X 80 MM, TOTAL DIMENSIONS: 1400 MM X 1140 MM X 1960 MM,
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-<b>properties:</b>

* rolling trajectory of the manufacturer's flower
* condition: fully functional, with traces of use
* feet to be ordered separately
* color: blue / grey
* ideal for the fast material handling
* expertly disassembled and packed
* motor available
* price per pcs.
* 4 stk. in stock

<b>technical data:</b>

mass of rolling railway curve
total width approx.: 565 mm
curve radius approx.: 90 degrees
internal dimensions: 930mm
external dimensions: 1860mm
incl. sew motor incl. guide

<b>information on the role</b>
clamping length approx.: 510 mm
roll diameter: 80 mm
center distance inside: approx. 75 mm
center distance outside: approx. 125 mm
material: plastic

<b>roller rail curve</b>

thanks to the superb craftsmanship of the roller path curve glides your material, even under high load, gently to the place of destination.

<b>tailor-made solutions for your intralogistics</b>

we are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! gladly we will create you an individual offer or advise on the design or assembly questions. just let your needs and local conditions us to.

take advantage of our many years of experience and our excellent network of professionals. for companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

together, we will work out ways to optimize your process and material flow cost effectively and sustainably. we can offer you even fully automatic sorting equipment or additional components such as picking racks or containers. <B>PROPERTIES:</B> * ROLLING TRAJECTORY OF THE MANUFACTURER'S FLOWER * CONDITION: FULLY FUNCTIONAL, WITH TRACES OF USE * FEET TO BE ORDERED SEPARATELY * COLOR: BLUE / GREY * IDEAL FOR THE FAST MATERIAL HANDLING * EXPERTLY DISASSEMBLED AND PACKED * MOTOR AVAILABLE * PRICE PER PCS. * 4 STK. IN STOCK <B>TECHNICAL DATA:</B> MASS OF ROLLING RAILWAY CURVE TOTAL WIDTH APPROX.: 565 MM CURVE RADIUS APPROX.: 90 DEGREES INTERNAL DIMENSIONS: 930MM EXTERNAL DIMENSIONS: 1860MM INCL. SEW MOTOR INCL. GUIDE <B>INFORMATION ON THE ROLE</B> CLAMPING LENGTH APPROX.: 510 MM ROLL DIAMETER: 80 MM CENTER DISTANCE INSIDE: APPROX. 75 MM CENTER DISTANCE OUTSIDE: APPROX. 125 MM MATERIAL: PLASTIC <B>ROLLER RAIL CURVE</B> THANKS TO THE SUPERB CRAFTSMANSHIP OF THE ROLLER PATH CURVE GLIDES YOUR MATERIAL, EVEN UNDER HIGH LOAD, GENTLY TO THE PLACE OF DESTINATION. <B>TAILOR-MADE SOLUTIONS FOR YOUR INTRALOGISTICS</B> WE ARE YOUR COMPETENT PARTNER FOR ROLLER CONVEYORS, BELT LIFTS, INCLINED CONVEYORS OR TELESCOPES TO THE LOADING AND UNLOADING OF GOODS! GLADLY WE WILL CREATE YOU AN INDIVIDUAL OFFER OR ADVISE ON THE DESIGN OR ASSEMBLY QUESTIONS. JUST LET YOUR NEEDS AND LOCAL CONDITIONS US TO. TAKE ADVANTAGE OF OUR MANY YEARS OF EXPERIENCE AND OUR EXCELLENT NETWORK OF PROFESSIONALS. FOR COMPANIES OF VARIOUS INDUSTRIES, SUCH AS: LOGISTICS, PHARMACEUTICAL INDUSTRY, CRAFTS OR THE ELECTRONICS INDUSTRY WE HAVE ALREADY SUCCESSFULLY IMPLEMENTED PROJECTS. TOGETHER, WE WILL WORK OUT WAYS TO OPTIMIZE YOUR PROCESS AND MATERIAL FLOW COST EFFECTIVELY AND SUSTAINABLY. WE CAN OFFER YOU EVEN FULLY AUTOMATIC SORTING EQUIPMENT OR ADDITIONAL COMPONENTS SUCH AS PICKING RACKS OR CONTAINERS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Precio: 195.000 €
Ubicación: Land-description:<br />\ncurrently set for beer in pet bottles 0,33 l + 0,5 l<br />\n<br />\n<br />\ncapacity:<br />\n40.000 b/h<br />\n<br />\nwidth:<br />\n7000 mm<br />\n<br />\nlength:<br />\n26500 mm<br />\n<br />\nserial number:<br />\n22.4-558-21<br />\n<br />\n<br />\n\r<br />\nbesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines.<br />\r\nyou have a first idea or even a concrete plan? it does not matter how far your project is, we support you in every phase!<br />\r\nor do you want to sell or market your machine? we also buy machines or provide you with a marketing concept.<br />\r\nask for your individual offer or visit us in knetzgau. concerning bigger projects we can of course also visit you in your company to do an on-site survey.<br />\r\nour drink technicians are working worldwide for our customers!<br />\r\nwe are looking forward to hearing from you.<br />\r\n<br />\r\nall information is supplied without guarantee. DESCRIPTION:
\NCURRENTLY SET FOR BEER IN PET BOTTLES 0,33 L + 0,5 L
\N
\N
\NCAPACITY:
\N40.000 B/H
\N
\NWIDTH:
\N7000 MM
\N
\NLENGTH:
\N26500 MM
\N
\NSERIAL NUMBER:
\N22.4-558-21
\N
\N
\N\R
\NBESIDES BUYING AND SELLING OF CONVEYORS AND MACHINES OUR STRENGTH LIES PARTICULARLY IN SERVICES AND PROJECT PLANNING, AS FOR EXAMPLE IN REBUILDING AND ADAPTING OF YOUR INSTALLATION AS WELL AS IN OVERHAUL AND RELOCATION OF MACHINES.
\R\NYOU HAVE A FIRST IDEA OR EVEN A CONCRETE PLAN? IT DOES NOT MATTER HOW FAR YOUR PROJECT IS, WE SUPPORT YOU IN EVERY PHASE!
\R\NOR DO YOU WANT TO SELL OR MARKET YOUR MACHINE? WE ALSO BUY MACHINES OR PROVIDE YOU WITH A MARKETING CONCEPT.
\R\NASK FOR YOUR INDIVIDUAL OFFER OR VISIT US IN KNETZGAU. CONCERNING BIGGER PROJECTS WE CAN OF COURSE ALSO VISIT YOU IN YOUR COMPANY TO DO AN ON-SITE SURVEY.
\R\NOUR DRINK TECHNICIANS ARE WORKING WORLDWIDE FOR OUR CUSTOMERS!
\R\NWE ARE LOOKING FORWARD TO HEARING FROM YOU.
\R\N
\R\NALL INFORMATION IS SUPPLIED WITHOUT GUARANTEE.
Vendedor: DRINK Getränkemaschinen GmbH
Año de construcción: usado
Ubicación: Land-<b>properties:</b>

used belt conveyor by 180 â° left turn
* condition: fully functional with traces of use
* ideal for the fast material handling
* expertly disassembled and packed
* feet to be ordered separately
* color: silver

<b>technical data:</b>
mass of the belt conveyor curve by 180 â° left
overall length: 3520mm
total depth: 1670 mm
total width approx.: 1060 mm overall width incl. motor: 1370 mm curve angle: approx. 180 degrees degrees belt width: 900 mm
frame height: 270 mm
material: aluminium
incl. sew motor, 1,1kw
engine type: movimot
speed adjustable
material: gripgurt

<b>belt conveyor curve</b>

thanks to the superb craftsmanship of the belt conveyor, curve glides your material, even under high load, gently to the place of destination. <b>tailor-made solutions for your intralogistics</b>
we are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! gladly we will create you an individual offer or advise on the design or assembly questions. just let your needs and local conditions us to. take advantage of our many years of experience and our excellent network of professionals. for companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects. together, we will work out ways to optimize your process and material flow cost effectively and sustainably. we can offer you even fully automatic sorting equipment or additional components such as picking racks or containers. <B>PROPERTIES:</B> USED BELT CONVEYOR BY 180 &ACIRC;&DEG; LEFT TURN * CONDITION: FULLY FUNCTIONAL WITH TRACES OF USE * IDEAL FOR THE FAST MATERIAL HANDLING * EXPERTLY DISASSEMBLED AND PACKED * FEET TO BE ORDERED SEPARATELY * COLOR: SILVER <B>TECHNICAL DATA:</B> MASS OF THE BELT CONVEYOR CURVE BY 180 &ACIRC;&DEG; LEFT OVERALL LENGTH: 3520MM TOTAL DEPTH: 1670 MM TOTAL WIDTH APPROX.: 1060 MM OVERALL WIDTH INCL. MOTOR: 1370 MM CURVE ANGLE: APPROX. 180 DEGREES DEGREES BELT WIDTH: 900 MM FRAME HEIGHT: 270 MM MATERIAL: ALUMINIUM INCL. SEW MOTOR, 1,1KW ENGINE TYPE: MOVIMOT SPEED ADJUSTABLE MATERIAL: GRIPGURT <B>BELT CONVEYOR CURVE</B> THANKS TO THE SUPERB CRAFTSMANSHIP OF THE BELT CONVEYOR, CURVE GLIDES YOUR MATERIAL, EVEN UNDER HIGH LOAD, GENTLY TO THE PLACE OF DESTINATION. <B>TAILOR-MADE SOLUTIONS FOR YOUR INTRALOGISTICS</B> WE ARE YOUR COMPETENT PARTNER FOR ROLLER CONVEYORS, BELT LIFTS, INCLINED CONVEYORS OR TELESCOPES TO THE LOADING AND UNLOADING OF GOODS! GLADLY WE WILL CREATE YOU AN INDIVIDUAL OFFER OR ADVISE ON THE DESIGN OR ASSEMBLY QUESTIONS. JUST LET YOUR NEEDS AND LOCAL CONDITIONS US TO. TAKE ADVANTAGE OF OUR MANY YEARS OF EXPERIENCE AND OUR EXCELLENT NETWORK OF PROFESSIONALS. FOR COMPANIES OF VARIOUS INDUSTRIES, SUCH AS: LOGISTICS, PHARMACEUTICAL INDUSTRY, CRAFTS OR THE ELECTRONICS INDUSTRY WE HAVE ALREADY SUCCESSFULLY IMPLEMENTED PROJECTS. TOGETHER, WE WILL WORK OUT WAYS TO OPTIMIZE YOUR PROCESS AND MATERIAL FLOW COST EFFECTIVELY AND SUSTAINABLY. WE CAN OFFER YOU EVEN FULLY AUTOMATIC SORTING EQUIPMENT OR ADDITIONAL COMPONENTS SUCH AS PICKING RACKS OR CONTAINERS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Precio: used machinery auction RESALE 3.500 €
Ubicación: Land-weight approx.: 10500 kg<br/>dimensions (l x w x h) approx.: 5500 x 2050 x 2900 mm<br/>description: serial number 11571, pressure capacity 100 t, bending length 5000 mm, stand passage 3100 mm, max. ram stroke 120 mm, hydraulic ram control 120 mm, max. distance between table and ram 300 mm, projection 200 mm, table width 180 mm, closing speed 120 mm/s, working speed 11 mm/s, tracking speed 70 mm/s, drive power 11 kw, machine is equipped with lvd-control mnc 8200, hydraulic tool clamping, ram approx. 4500 mm long, 1 die 3000 mm, documentation with press inspection book, backgauge adjustment range approx. 750 mm, rear safety guard electrically locked, 1 pallet of tools. WEIGHT APPROX.: 10500 KG
DIMENSIONS (L X W X H) APPROX.: 5500 X 2050 X 2900 MM
DESCRIPTION: SERIAL NUMBER 11571, PRESSURE CAPACITY 100 T, BENDING LENGTH 5000 MM, STAND PASSAGE 3100 MM, MAX. RAM STROKE 120 MM, HYDRAULIC RAM CONTROL 120 MM, MAX. DISTANCE BETWEEN TABLE AND RAM 300 MM, PROJECTION 200 MM, TABLE WIDTH 180 MM, CLOSING SPEED 120 MM/S, WORKING SPEED 11 MM/S, TRACKING SPEED 70 MM/S, DRIVE POWER 11 KW, MACHINE IS EQUIPPED WITH LVD-CONTROL MNC 8200, HYDRAULIC TOOL CLAMPING, RAM APPROX. 4500 MM LONG, 1 DIE 3000 MM, DOCUMENTATION WITH PRESS INSPECTION BOOK, BACKGAUGE ADJUSTMENT RANGE APPROX. 750 MM, REAR SAFETY GUARD ELECTRICALLY LOCKED, 1 PALLET OF TOOLS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-<b>properties:</b>

used conveyor 180 degrees left with 500mm pitch curve
* condition: fully functional with traces of use
* ideal for the fast material handling
* expertly disassembled and packed
* feet to be ordered separately
* color: silver

<b>technical data:</b>
mass of the belt conveyor curve by 180 â° left with 500 mm pitch
overall length: 3520mm
total width approx.: 1060 mm overall width incl. motor: 1370 mm curve angle: approx. 180 degrees degrees with 500 mm pitch
belt width: 900 mm
material: aluminium
incl. sew motor, 1,1kw
engine type: movimot
speed adjustable
material: gripgurt

<b>belt conveyor curve</b>

thanks to the superb craftsmanship of the belt conveyor, curve glides your material, even under high load, gently to the place of destination. <b>tailor-made solutions for your intralogistics</b>
we are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! gladly we will create you an individual offer or advise on the design or assembly questions. just let your needs and local conditions us to. take advantage of our many years of experience and our excellent network of professionals. for companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects. together, we will work out ways to optimize your process and material flow cost effectively and sustainably. we can offer you even fully automatic sorting equipment or additional components such as picking racks or containers. <B>PROPERTIES:</B> USED CONVEYOR 180 DEGREES LEFT WITH 500MM PITCH CURVE * CONDITION: FULLY FUNCTIONAL WITH TRACES OF USE * IDEAL FOR THE FAST MATERIAL HANDLING * EXPERTLY DISASSEMBLED AND PACKED * FEET TO BE ORDERED SEPARATELY * COLOR: SILVER <B>TECHNICAL DATA:</B> MASS OF THE BELT CONVEYOR CURVE BY 180 &ACIRC;&DEG; LEFT WITH 500 MM PITCH OVERALL LENGTH: 3520MM TOTAL WIDTH APPROX.: 1060 MM OVERALL WIDTH INCL. MOTOR: 1370 MM CURVE ANGLE: APPROX. 180 DEGREES DEGREES WITH 500 MM PITCH BELT WIDTH: 900 MM MATERIAL: ALUMINIUM INCL. SEW MOTOR, 1,1KW ENGINE TYPE: MOVIMOT SPEED ADJUSTABLE MATERIAL: GRIPGURT <B>BELT CONVEYOR CURVE</B> THANKS TO THE SUPERB CRAFTSMANSHIP OF THE BELT CONVEYOR, CURVE GLIDES YOUR MATERIAL, EVEN UNDER HIGH LOAD, GENTLY TO THE PLACE OF DESTINATION. <B>TAILOR-MADE SOLUTIONS FOR YOUR INTRALOGISTICS</B> WE ARE YOUR COMPETENT PARTNER FOR ROLLER CONVEYORS, BELT LIFTS, INCLINED CONVEYORS OR TELESCOPES TO THE LOADING AND UNLOADING OF GOODS! GLADLY WE WILL CREATE YOU AN INDIVIDUAL OFFER OR ADVISE ON THE DESIGN OR ASSEMBLY QUESTIONS. JUST LET YOUR NEEDS AND LOCAL CONDITIONS US TO. TAKE ADVANTAGE OF OUR MANY YEARS OF EXPERIENCE AND OUR EXCELLENT NETWORK OF PROFESSIONALS. FOR COMPANIES OF VARIOUS INDUSTRIES, SUCH AS: LOGISTICS, PHARMACEUTICAL INDUSTRY, CRAFTS OR THE ELECTRONICS INDUSTRY WE HAVE ALREADY SUCCESSFULLY IMPLEMENTED PROJECTS. TOGETHER, WE WILL WORK OUT WAYS TO OPTIMIZE YOUR PROCESS AND MATERIAL FLOW COST EFFECTIVELY AND SUSTAINABLY. WE CAN OFFER YOU EVEN FULLY AUTOMATIC SORTING EQUIPMENT OR ADDITIONAL COMPONENTS SUCH AS PICKING RACKS OR CONTAINERS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Precio: used machinery auction RESALE 700 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 1500 x 750 x 2100 mm<br/>description: speeds 355 to 2000 rpm, quill stroke 100 mm, projection 200 mm, distance between drilling quills 320 mm, table clamping surface 1450 x 380 mm, with separate coolant device WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 1500 X 750 X 2100 MM
DESCRIPTION: SPEEDS 355 TO 2000 RPM, QUILL STROKE 100 MM, PROJECTION 200 MM, DISTANCE BETWEEN DRILLING QUILLS 320 MM, TABLE CLAMPING SURFACE 1450 X 380 MM, WITH SEPARATE COOLANT DEVICE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-<b>properties:</b>

used conveyor curve 90 â° left
* condition: fully functional with traces of use
* ideal for the fast material handling
* expertly disassembled and packed
* feet to be ordered separately
* color: silver

<b>technical data:</b>
mass of the belt conveyor curve 90â° overall length: 2260 mm
internal dimensions: 780mm
total width approx.: 1070 mm overall width incl. motor: 1400 mm curve angle: approx. 90 â° degree
frame height: 210 mm
material: aluminium
incl. sew motor, 0, 75kw
engine type: movimot
speed adjustable

belt width approx.: 900 mm
material: gripgurt

<b>belt conveyor curve</b>

thanks to the superb craftsmanship of the belt conveyor, curve glides your material, even under high load, gently to the place of destination. <b>tailor-made solutions for your intralogistics</b>
we are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! gladly we will create you an individual offer or advise on the design or assembly questions. just let your needs and local conditions us to. take advantage of our many years of experience and our excellent network of professionals. for companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects. together, we will work out ways to optimize your process and material flow cost effectively and sustainably. we can offer you even fully automatic sorting equipment or additional components such as picking racks or containers. <B>PROPERTIES:</B> USED CONVEYOR CURVE 90 &ACIRC;&DEG; LEFT * CONDITION: FULLY FUNCTIONAL WITH TRACES OF USE * IDEAL FOR THE FAST MATERIAL HANDLING * EXPERTLY DISASSEMBLED AND PACKED * FEET TO BE ORDERED SEPARATELY * COLOR: SILVER <B>TECHNICAL DATA:</B> MASS OF THE BELT CONVEYOR CURVE 90&ACIRC;&DEG; OVERALL LENGTH: 2260 MM INTERNAL DIMENSIONS: 780MM TOTAL WIDTH APPROX.: 1070 MM OVERALL WIDTH INCL. MOTOR: 1400 MM CURVE ANGLE: APPROX. 90 &ACIRC;&DEG; DEGREE FRAME HEIGHT: 210 MM MATERIAL: ALUMINIUM INCL. SEW MOTOR, 0, 75KW ENGINE TYPE: MOVIMOT SPEED ADJUSTABLE BELT WIDTH APPROX.: 900 MM MATERIAL: GRIPGURT <B>BELT CONVEYOR CURVE</B> THANKS TO THE SUPERB CRAFTSMANSHIP OF THE BELT CONVEYOR, CURVE GLIDES YOUR MATERIAL, EVEN UNDER HIGH LOAD, GENTLY TO THE PLACE OF DESTINATION. <B>TAILOR-MADE SOLUTIONS FOR YOUR INTRALOGISTICS</B> WE ARE YOUR COMPETENT PARTNER FOR ROLLER CONVEYORS, BELT LIFTS, INCLINED CONVEYORS OR TELESCOPES TO THE LOADING AND UNLOADING OF GOODS! GLADLY WE WILL CREATE YOU AN INDIVIDUAL OFFER OR ADVISE ON THE DESIGN OR ASSEMBLY QUESTIONS. JUST LET YOUR NEEDS AND LOCAL CONDITIONS US TO. TAKE ADVANTAGE OF OUR MANY YEARS OF EXPERIENCE AND OUR EXCELLENT NETWORK OF PROFESSIONALS. FOR COMPANIES OF VARIOUS INDUSTRIES, SUCH AS: LOGISTICS, PHARMACEUTICAL INDUSTRY, CRAFTS OR THE ELECTRONICS INDUSTRY WE HAVE ALREADY SUCCESSFULLY IMPLEMENTED PROJECTS. TOGETHER, WE WILL WORK OUT WAYS TO OPTIMIZE YOUR PROCESS AND MATERIAL FLOW COST EFFECTIVELY AND SUSTAINABLY. WE CAN OFFER YOU EVEN FULLY AUTOMATIC SORTING EQUIPMENT OR ADDITIONAL COMPONENTS SUCH AS PICKING RACKS OR CONTAINERS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 600 x 700 x 1800 mm<br/>description: spindle speed range 125 to 3000 rpm, table size 510 x 400 mm, projection 300 mm, quill stroke approx. 150 mm WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 700 X 1800 MM
DESCRIPTION: SPINDLE SPEED RANGE 125 TO 3000 RPM, TABLE SIZE 510 X 400 MM, PROJECTION 300 MM, QUILL STROKE APPROX. 150 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-haeger insertion machine model 824 ot - 3 h / bj. 2006-2012 / max. pressure force 72 kn / projection 610 mm / cylinder stroke 0-220 mm / hydraulic / 148 bar / incl.  tool package: 4 sets of mother - 4 sets pin - 3 sets bushes (20,000 euros) - including laser target cross light - incl. work light / hours: 5,400 / 2006 to 2012: demo machine with approximately 400 hours / good condition fe.gi.maschinen.sbg.at

halim automatic insertion press mod 824 ot - 3 h / year 2006-2012 / max. pressure 72 kn / throat cylinder stroke 0-220 mm/610 mm / hydraulic / 148 bar / incl. tool - kit: 4 sets of nuts - 4 sets of bolts - 3 sets of bushes (20,000 euros) - incl. laser target light cross - incl.  work light / hours: 5,400 / 2006 to 2012: demo machine with approx. 400 hours / good condition
fe.gi.maschinen.sbg.at HAEGER INSERTION MACHINE MODEL 824 OT - 3 H / BJ. 2006-2012 / MAX. PRESSURE FORCE 72 KN / PROJECTION 610 MM / CYLINDER STROKE 0-220 MM / HYDRAULIC / 148 BAR / INCL. TOOL PACKAGE: 4 SETS OF MOTHER - 4 SETS PIN - 3 SETS BUSHES (20,000 EUROS) - INCLUDING LASER TARGET CROSS LIGHT - INCL. WORK LIGHT / HOURS: 5,400 / 2006 TO 2012: DEMO MACHINE WITH APPROXIMATELY 400 HOURS / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT HALIM AUTOMATIC INSERTION PRESS MOD 824 OT - 3 H / YEAR 2006-2012 / MAX. PRESSURE 72 KN / THROAT CYLINDER STROKE 0-220 MM/610 MM / HYDRAULIC / 148 BAR / INCL. TOOL - KIT: 4 SETS OF NUTS - 4 SETS OF BOLTS - 3 SETS OF BUSHES (20,000 EUROS) - INCL. LASER TARGET LIGHT CROSS - INCL. WORK LIGHT / HOURS: 5,400 / 2006 TO 2012: DEMO MACHINE WITH APPROX. 400 HOURS / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 600 x 800 x 1850 mm<br/>description: spindle adapter mk 3, table size 250 x 310 mm, projection 260 mm, spindle speed range 110 to 1250 rpm WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 800 X 1850 MM
DESCRIPTION: SPINDLE ADAPTER MK 3, TABLE SIZE 250 X 310 MM, PROJECTION 260 MM, SPINDLE SPEED RANGE 110 TO 1250 RPM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
1 unused full - and wheel-mobile concrete mixing plant

fabr. nisbau euromix 60
=======================
year 2015

capacity: 60 mâ³ / h
==================

control with new update (language choice)

the plant was never put into use, because a project abroad not to the carry came!

performance: approx. 60 mâ³ / h
fixed concrete output/charge: approx. 1.25 cbm
aggregate storage / silo of rows of: 4 x 12 cbm
concrete delivery height: 4.10 m
number of cement silos: 4 pcs. ã  10 cbm

1 UNUSED FULL - AND WHEEL-MOBILE CONCRETE MIXING PLANT FABR. NISBAU EUROMIX 60 ======================= YEAR 2015 CAPACITY: 60 M&ACIRC;&SUP3; / H ================== CONTROL WITH NEW UPDATE (LANGUAGE CHOICE) THE PLANT WAS NEVER PUT INTO USE, BECAUSE A PROJECT ABROAD NOT TO THE CARRY CAME! PERFORMANCE: APPROX. 60 M&ACIRC;&SUP3; / H FIXED CONCRETE OUTPUT/CHARGE: APPROX. 1.25 CBM AGGREGATE STORAGE / SILO OF ROWS OF: 4 X 12 CBM CONCRETE DELIVERY HEIGHT: 4.10 M NUMBER OF CEMENT SILOS: 4 PCS. &ATILDE;&NBSP; 10 CBM
Vendedor: EL-Maschinenbörse GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 3.500 €
Ubicación: Land-weight approx.: 12200 kg<br/>dimensions (l x w x h) approx.: 7000 x 5000 x 3000 mm<br/>description: cutting length 5000 mm, passage between the stands 5040 mm, cutting performance at a sheet strength of 450 n/mm² 4.0 mm, cutting performance at a sheet strength of 700 n/mm² 3.0 mm, adjustable cutting angle 0° 41 min to 1° 13 min, cutting speed depending on cutting angle 19 to 28 strokes/min, column projection 90 mm, number of hold-down cylinders 25, distance between hold-down punch centre and cutting line 58 mm, cutting gap adjustment manually via tension and compression screws, rear backgauge programmable via x 3 of dnc control, backgauge depth 1000 mm, motor power 12.5 kw, machine equipped with cybelec control dnc 70, programmable backgauge range 1000 mm, discharge belt, angular backgauge and support arms, working height on steel girders 1420 mm, alternatively foundation opening approx. 320 mm deep, possible working height 900 mm. the machine can be transported with a mega trailer (loading height 3000 mm). WEIGHT APPROX.: 12200 KG
DIMENSIONS (L X W X H) APPROX.: 7000 X 5000 X 3000 MM
DESCRIPTION: CUTTING LENGTH 5000 MM, PASSAGE BETWEEN THE STANDS 5040 MM, CUTTING PERFORMANCE AT A SHEET STRENGTH OF 450 N/MM² 4.0 MM, CUTTING PERFORMANCE AT A SHEET STRENGTH OF 700 N/MM² 3.0 MM, ADJUSTABLE CUTTING ANGLE 0° 41 MIN TO 1° 13 MIN, CUTTING SPEED DEPENDING ON CUTTING ANGLE 19 TO 28 STROKES/MIN, COLUMN PROJECTION 90 MM, NUMBER OF HOLD-DOWN CYLINDERS 25, DISTANCE BETWEEN HOLD-DOWN PUNCH CENTRE AND CUTTING LINE 58 MM, CUTTING GAP ADJUSTMENT MANUALLY VIA TENSION AND COMPRESSION SCREWS, REAR BACKGAUGE PROGRAMMABLE VIA X 3 OF DNC CONTROL, BACKGAUGE DEPTH 1000 MM, MOTOR POWER 12.5 KW, MACHINE EQUIPPED WITH CYBELEC CONTROL DNC 70, PROGRAMMABLE BACKGAUGE RANGE 1000 MM, DISCHARGE BELT, ANGULAR BACKGAUGE AND SUPPORT ARMS, WORKING HEIGHT ON STEEL GIRDERS 1420 MM, ALTERNATIVELY FOUNDATION OPENING APPROX. 320 MM DEEP, POSSIBLE WORKING HEIGHT 900 MM. THE MACHINE CAN BE TRANSPORTED WITH A MEGA TRAILER (LOADING HEIGHT 3000 MM).
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--handeinlegesicher, newly tested uvv -.

power 35 to
stroke rate 60 per minute
projection 225 mm
mounting height approx. 410 mm without mounting plate

plunger stroke 8-100 mm
tappet adjustment 85 mm
table 580 x 460 mm

drive 2,2 kw
weight approx. 2.4 to
width x depth x height approx. 1.3 x 1.8 x 2.1 m

-hydraulically actuated clutch / brake combination
-transmission
-automatic grease lubrication

machine is in good condition and can be demonstrated.

-HANDEINLEGESICHER, NEWLY TESTED UVV -. POWER 35 TO STROKE RATE 60 PER MINUTE PROJECTION 225 MM MOUNTING HEIGHT APPROX. 410 MM WITHOUT MOUNTING PLATE PLUNGER STROKE 8-100 MM TAPPET ADJUSTMENT 85 MM TABLE 580 X 460 MM DRIVE 2,2 KW WEIGHT APPROX. 2.4 TO WIDTH X DEPTH X HEIGHT APPROX. 1.3 X 1.8 X 2.1 M -HYDRAULICALLY ACTUATED CLUTCH / BRAKE COMBINATION -TRANSMISSION -AUTOMATIC GREASE LUBRICATION MACHINE IS IN GOOD CONDITION AND CAN BE DEMONSTRATED.
Vendedor: Schrenk Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 600 x 700 x 2200 mm<br/>description: machine number 27204, spindle speed ranges 200/280/1120 rpm, projection 230 mm table size 350 x 280 mm, on sturdy base with existing change gears. WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 700 X 2200 MM
DESCRIPTION: MACHINE NUMBER 27204, SPINDLE SPEED RANGES 200/280/1120 RPM, PROJECTION 230 MM TABLE SIZE 350 X 280 MM, ON STURDY BASE WITH EXISTING CHANGE GEARS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-round timber sorting crane of baljer & zembrod
built in 1991
18,000 hours of operation
type asterix
3 metre gauge
projection 12.50 meters
diameter with mirror
with 70 meters of heavy load bars
with hook and bracket
cab with heating
with compound miter saw
with the lengths stag
 ROUND TIMBER SORTING CRANE OF BALJER & ZEMBROD BUILT IN 1991 18,000 HOURS OF OPERATION TYPE ASTERIX 3 METRE GAUGE PROJECTION 12.50 METERS DIAMETER WITH MIRROR WITH 70 METERS OF HEAVY LOAD BARS WITH HOOK AND BRACKET CAB WITH HEATING WITH COMPOUND MITER SAW WITH THE LENGTHS STAG
Vendedor: Buchner und Pradel
Año de construcción: usado
Precio: used machinery auction RESALE 1.900 €
Ubicación: Land-weight approx.: 4000 kg<br/>cutting length: 3300 mm<br/>dimensions (l x w x h) approx.: 6100 x 2400 x 1600 mm<br/>main motor: 7,5 kw<br/>scoring saw: 1,1 kw<br/>setting measure approx (l x w x h): 6100 x 3300 x 1600 mm<br/>saw blade protection: 85 mm<br/>main saw blade: 360 - (400) mm<br/>scoring saw blade: 160 mm<br/>air table: 3  <br/>saw carriage speed forward: 80 m/min<br/>saw carriage speed reverse: 80 m/min<br/>program fence speed forward: 60 m/min<br/>program fence speed reverse: 60 m/min<br/>description:  giben starmatic panel saw - cutting length 3100 mm - cutting depth 3300 mm - saw blade projection 85 mm - main saw blade 360-(400)mm - scoring saw blade 160 mm - saw carriage feed forward 80 m/min - saw carriage feed return 80 m/min - program slide feed feed rate 60 m/min - program slide feed return 60 m/min - 3 pcs. air cushion tables - main engine 7,5 kw - scorer 1,1 kw - installation dimension approx. (lxwxh) 6100 x 6100 x 1600   WEIGHT APPROX.: 4000 KG
CUTTING LENGTH: 3300 MM
DIMENSIONS (L X W X H) APPROX.: 6100 X 2400 X 1600 MM
MAIN MOTOR: 7,5 KW
SCORING SAW: 1,1 KW
SETTING MEASURE APPROX (L X W X H): 6100 X 3300 X 1600 MM
SAW BLADE PROTECTION: 85 MM
MAIN SAW BLADE: 360 - (400) MM
SCORING SAW BLADE: 160 MM
AIR TABLE: 3
SAW CARRIAGE SPEED FORWARD: 80 M/MIN
SAW CARRIAGE SPEED REVERSE: 80 M/MIN
PROGRAM FENCE SPEED FORWARD: 60 M/MIN
PROGRAM FENCE SPEED REVERSE: 60 M/MIN
DESCRIPTION: GIBEN STARMATIC PANEL SAW - CUTTING LENGTH 3100 MM - CUTTING DEPTH 3300 MM - SAW BLADE PROJECTION 85 MM - MAIN SAW BLADE 360-(400)MM - SCORING SAW BLADE 160 MM - SAW CARRIAGE FEED FORWARD 80 M/MIN - SAW CARRIAGE FEED RETURN 80 M/MIN - PROGRAM SLIDE FEED FEED RATE 60 M/MIN - PROGRAM SLIDE FEED RETURN 60 M/MIN - 3 PCS. AIR CUSHION TABLES - MAIN ENGINE 7,5 KW - SCORER 1,1 KW - INSTALLATION DIMENSION APPROX. (LXWXH) 6100 X 6100 X 1600
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-make: mitutoyo
model: crysta-apex-s 7106 cmm
year: 2014
condition: used
machine type: other 
location of machine: uk 
documentation / manuals included? yes 
condition info: very good condition!

machine details
available as new due to revised project contract.

specifications:
movement range: x axis 705mm y axis 1005mm z axis 605mm

measuring scale resolution: 0.0001mm

traversing speed: 8-300mm/sec per axis 

max combined speed: 520mm/sec

compressed air flow rate: 60nl/min (source 120l/min)

volumetric length measuring accuracy according to iso10360-2 (2009) “ep m//” specification

18-22°c

16-26°c

probe

1.7 + 3l/1000pm

1 7 + 4l/1000 m

mpp310q (64 x 18 mm)

1.7 + 3l/1000pm

1.7 + 4l/1000/m

sp25 (64 x 50 mm)

1.9 + 3l/1000 am

1.9 + 4l/1000 /m

tp200 (64 x 10 mm)

2.2 + 3l/1000 am

2.2 + 4l/1000 am

tp20 (64 x 10 mm)

l = measured length in mm.

machine description
the crysta-apex s is a high accuracy, high speed moving bridge type co-ordinate measuring machine utilising a granite , base, which also provides the y-axis, guide way. a unique design of self-adjusting air bearing is used on each axis to provide excellent stability during high-speed movement and measurement. the moving bridge is constructed of low mass alloy, the “x” beam and “z” spindle external surfaces being impregnated by an oxide coating process to form an   extremely hard surface, which further improves these critical components stability and also provides good wear resistance. power drive is activated via a remote joystick unit for manual drive operation.

each axis can be locked and fine movement adjustment is provided. the measurement system is by mitutoyo srd linear. encoders fitted so as to become an integral part of the machine for thermal stability, and provide a direct digital output of measured data.

the machine is fully equipped for cnc operation via the newly designed machine control unit model uc400 which provides full digital servo control for high speed, high accuracy positioning with 3-axis vector drive and automatic computation of all acceleration and deceleration without operator input.

the controller uses a universal serial bus (usb) connection to simplify computer connectivity and installation.

circular path motion is also provided for continuous movement between relative positions.

twin joystick unit for control of ’x’ and ‘y’ axis movements with second joystick for ‘z’ axis control and optional rotary    table. comprehensive display with control buttons for individual axis locks and speed control. MAKE: MITUTOYO MODEL: CRYSTA-APEX-S 7106 CMM YEAR: 2014 CONDITION: USED MACHINE TYPE: OTHER LOCATION OF MACHINE: UK DOCUMENTATION / MANUALS INCLUDED? YES CONDITION INFO: VERY GOOD CONDITION! MACHINE DETAILS AVAILABLE AS NEW DUE TO REVISED PROJECT CONTRACT. SPECIFICATIONS: MOVEMENT RANGE: X AXIS 705MM Y AXIS 1005MM Z AXIS 605MM MEASURING SCALE RESOLUTION: 0.0001MM TRAVERSING SPEED: 8-300MM/SEC PER AXIS MAX COMBINED SPEED: 520MM/SEC COMPRESSED AIR FLOW RATE: 60NL/MIN (SOURCE 120L/MIN) VOLUMETRIC LENGTH MEASURING ACCURACY ACCORDING TO ISO10360-2 (2009) “EP M//” SPECIFICATION 18-22°C 16-26°C PROBE 1.7 + 3L/1000PM 1 7 + 4L/1000 M MPP310Q (64 X 18 MM) 1.7 + 3L/1000PM 1.7 + 4L/1000/M SP25 (64 X 50 MM) 1.9 + 3L/1000 AM 1.9 + 4L/1000 /M TP200 (64 X 10 MM) 2.2 + 3L/1000 AM 2.2 + 4L/1000 AM TP20 (64 X 10 MM) L = MEASURED LENGTH IN MM. MACHINE DESCRIPTION THE CRYSTA-APEX S IS A HIGH ACCURACY, HIGH SPEED MOVING BRIDGE TYPE CO-ORDINATE MEASURING MACHINE UTILISING A GRANITE , BASE, WHICH ALSO PROVIDES THE Y-AXIS, GUIDE WAY. A UNIQUE DESIGN OF SELF-ADJUSTING AIR BEARING IS USED ON EACH AXIS TO PROVIDE EXCELLENT STABILITY DURING HIGH-SPEED MOVEMENT AND MEASUREMENT. THE MOVING BRIDGE IS CONSTRUCTED OF LOW MASS ALLOY, THE “X” BEAM AND “Z” SPINDLE EXTERNAL SURFACES BEING IMPREGNATED BY AN OXIDE COATING PROCESS TO FORM AN EXTREMELY HARD SURFACE, WHICH FURTHER IMPROVES THESE CRITICAL COMPONENTS STABILITY AND ALSO PROVIDES GOOD WEAR RESISTANCE. POWER DRIVE IS ACTIVATED VIA A REMOTE JOYSTICK UNIT FOR MANUAL DRIVE OPERATION. EACH AXIS CAN BE LOCKED AND FINE MOVEMENT ADJUSTMENT IS PROVIDED. THE MEASUREMENT SYSTEM IS BY MITUTOYO SRD LINEAR. ENCODERS FITTED SO AS TO BECOME AN INTEGRAL PART OF THE MACHINE FOR THERMAL STABILITY, AND PROVIDE A DIRECT DIGITAL OUTPUT OF MEASURED DATA. THE MACHINE IS FULLY EQUIPPED FOR CNC OPERATION VIA THE NEWLY DESIGNED MACHINE CONTROL UNIT MODEL UC400 WHICH PROVIDES FULL DIGITAL SERVO CONTROL FOR HIGH SPEED, HIGH ACCURACY POSITIONING WITH 3-AXIS VECTOR DRIVE AND AUTOMATIC COMPUTATION OF ALL ACCELERATION AND DECELERATION WITHOUT OPERATOR INPUT. THE CONTROLLER USES A UNIVERSAL SERIAL BUS (USB) CONNECTION TO SIMPLIFY COMPUTER CONNECTIVITY AND INSTALLATION. CIRCULAR PATH MOTION IS ALSO PROVIDED FOR CONTINUOUS MOVEMENT BETWEEN RELATIVE POSITIONS. TWIN JOYSTICK UNIT FOR CONTROL OF ’X’ AND ‘Y’ AXIS MOVEMENTS WITH SECOND JOYSTICK FOR ‘Z’ AXIS CONTROL AND OPTIONAL ROTARY TABLE. COMPREHENSIVE DISPLAY WITH CONTROL BUTTONS FOR INDIVIDUAL AXIS LOCKS AND SPEED CONTROL.
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land-weight approx.: 15000 kg<br/>cutting length: 4300 mm<br/>control: siemens winac rtx <br/>dimensions (l x w x h) approx.: 27200 x 2450 x 2450 mm<br/>cutting height: 90 mm<br/>main motor: 18 kw<br/>cutting depth: 3300 mm<br/>software: mcs evolution <br/>saw blade protection: 105 mm<br/>max. opening of clamps: 105 mm<br/>clamps piece: 10  piece<br/>main saw blade: 360 mm<br/>scoring saw blade: 200 mm<br/>air table: 4 x 2100 mm x 700 mm <br/>lift table: hydraulisch, max. plattenbreite 2200 mm <br/>saw carriage speed forward: 5 - 160 m/min<br/>saw carriage speed reverse: 160 m/min<br/>program fence speed forward: 0 -  80 m/min<br/>program fence speed reverse: 80 (eu = 25) m/min<br/>total power approx: 28 kw<br/>description: <b><u>high quality schelling fh 4 430 panel saw with lift table</u></b><br> <br> <u>specifications:</u><br> <br> - cutting length 4300 mm<br> - cutting depth 3300 mm<br> - cutting height 90 mm<br> - saw blade projection 105 mm<br> - main saw blade diameter 360 mm<br> - scorer - saw blade diameter 200 mm<br> <br> - clamps 10 pieces<br> - clamps opening 105 mm<br> - clamps position 65/165/265/365/465/565/1065/1965/2865/3765 mm<br> <br> - saw carriage speed forward 5 - 160 m/min<br> - saw carriage speed reverse 160 m/min<br> - program fence speed forward 0 - 80 m/min<br> - program fence speed reverse 80 m/min (eu = 25)<br> <br> - 1 rigid air table 2100 mm x 700 mm<br> - 3 movable air tables 2100 mm x 700 mm<br> - angle stop on air table length 2100 mm<br> <br> - hydraulic lift table<br> - max. plate width 2200 mm<br> - stack height min. 6 mm to max. 580 mm<br> - max. load 7500 kg<br> <br> - angle stop on roller table length 1450 mm<br> - 2 package aligners for longitudinal edges<br> - 2 backstops<br> <br> - cut length automatic: automatic detection of the beginning and end of the plate by photoelectric switch<br> <br> - groove device: position, groove depth and width freely selectable<br> <br> - strip aligner before and after the pressure bar<br> - align WEIGHT APPROX.: 15000 KG
CUTTING LENGTH: 4300 MM
CONTROL: SIEMENS WINAC RTX
DIMENSIONS (L X W X H) APPROX.: 27200 X 2450 X 2450 MM
CUTTING HEIGHT: 90 MM
MAIN MOTOR: 18 KW
CUTTING DEPTH: 3300 MM
SOFTWARE: MCS EVOLUTION
SAW BLADE PROTECTION: 105 MM
MAX. OPENING OF CLAMPS: 105 MM
CLAMPS PIECE: 10 PIECE
MAIN SAW BLADE: 360 MM
SCORING SAW BLADE: 200 MM
AIR TABLE: 4 X 2100 MM X 700 MM
LIFT TABLE: HYDRAULISCH, MAX. PLATTENBREITE 2200 MM
SAW CARRIAGE SPEED FORWARD: 5 - 160 M/MIN
SAW CARRIAGE SPEED REVERSE: 160 M/MIN
PROGRAM FENCE SPEED FORWARD: 0 - 80 M/MIN
PROGRAM FENCE SPEED REVERSE: 80 (EU = 25) M/MIN
TOTAL POWER APPROX: 28 KW
DESCRIPTION: HIGH QUALITY SCHELLING FH 4 430 PANEL SAW WITH LIFT TABLE

SPECIFICATIONS:

- CUTTING LENGTH 4300 MM
- CUTTING DEPTH 3300 MM
- CUTTING HEIGHT 90 MM
- SAW BLADE PROJECTION 105 MM
- MAIN SAW BLADE DIAMETER 360 MM
- SCORER - SAW BLADE DIAMETER 200 MM

- CLAMPS 10 PIECES
- CLAMPS OPENING 105 MM
- CLAMPS POSITION 65/165/265/365/465/565/1065/1965/2865/3765 MM

- SAW CARRIAGE SPEED FORWARD 5 - 160 M/MIN
- SAW CARRIAGE SPEED REVERSE 160 M/MIN
- PROGRAM FENCE SPEED FORWARD 0 - 80 M/MIN
- PROGRAM FENCE SPEED REVERSE 80 M/MIN (EU = 25)

- 1 RIGID AIR TABLE 2100 MM X 700 MM
- 3 MOVABLE AIR TABLES 2100 MM X 700 MM
- ANGLE STOP ON AIR TABLE LENGTH 2100 MM

- HYDRAULIC LIFT TABLE
- MAX. PLATE WIDTH 2200 MM
- STACK HEIGHT MIN. 6 MM TO MAX. 580 MM
- MAX. LOAD 7500 KG

- ANGLE STOP ON ROLLER TABLE LENGTH 1450 MM
- 2 PACKAGE ALIGNERS FOR LONGITUDINAL EDGES
- 2 BACKSTOPS

- CUT LENGTH AUTOMATIC: AUTOMATIC DETECTION OF THE BEGINNING AND END OF THE PLATE BY PHOTOELECTRIC SWITCH

- GROOVE DEVICE: POSITION, GROOVE DEPTH AND WIDTH FREELY SELECTABLE

- STRIP ALIGNER BEFORE AND AFTER THE PRESSURE BAR
- ALIGN
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-deep hole drilling machine
manufacturer: minor type
type: microdrill vdm
year of construction: 2000

outer diameter: 4-30 mm
length: 25 mm to 300 mm
material: steel (not magnesium)

workpiece data for coordinate boring
maximum length: 300 mm
width (table projection) maximum: 120 mm
max height: 200 mm
material: steel (not magnesium)
weight: 75 kg

tool data:
drilling diameter:
0.70 mm to 3.0 mm (spindle 3)
0.70 to 5.0 mm (spindle 2 with belt drive 1: 3.5)
8.0 mm (spindle 2 with belt drive 1:1)
max drilling depth: 300 mm
main spindles: 2
distance between the main spindles: 180 mm
 DEEP HOLE DRILLING MACHINE MANUFACTURER: MINOR TYPE TYPE: MICRODRILL VDM YEAR OF CONSTRUCTION: 2000 OUTER DIAMETER: 4-30 MM LENGTH: 25 MM TO 300 MM MATERIAL: STEEL (NOT MAGNESIUM) WORKPIECE DATA FOR COORDINATE BORING MAXIMUM LENGTH: 300 MM WIDTH (TABLE PROJECTION) MAXIMUM: 120 MM MAX HEIGHT: 200 MM MATERIAL: STEEL (NOT MAGNESIUM) WEIGHT: 75 KG TOOL DATA: DRILLING DIAMETER: 0.70 MM TO 3.0 MM (SPINDLE 3) 0.70 TO 5.0 MM (SPINDLE 2 WITH BELT DRIVE 1: 3.5) 8.0 MM (SPINDLE 2 WITH BELT DRIVE 1:1) MAX DRILLING DEPTH: 300 MM MAIN SPINDLES: 2 DISTANCE BETWEEN THE MAIN SPINDLES: 180 MM
Vendedor: METEC GmbH
Año de construcción: usado
Ubicación: Land-number: 21 positionen<br/>weight: 30 kg<br/>condition: neu 0<br/>49-piece welding table accessory set<br/>10 l non-stick welding release agent<br/>10 pcs. clamping clamping height 300mm, projection 120mm<br/>10 pcs. clamping bolts<br/>4 pcs. eccentric<br/>4 pcs. stop 150mm<br/>2 pcs. stop 225mm<br/>2 pcs stop 260mm<br/>1 pc. stop with angle indicator<br/>4 pcs. angle stop 275<br/>2 pcs. angle stop 320<br/>2 pcs. angle stop 350mm<br/>4 pcs. angle 185x185mm<br/>1 pc. angle no. 10<br/>2 pcs. angle no. 11<br/>other accessories on request. see picture.<br/><br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> NUMBER: 21 POSITIONEN
WEIGHT: 30 KG
CONDITION: NEU 0
49-PIECE WELDING TABLE ACCESSORY SET
10 L NON-STICK WELDING RELEASE AGENT
10 PCS. CLAMPING CLAMPING HEIGHT 300MM, PROJECTION 120MM
10 PCS. CLAMPING BOLTS
4 PCS. ECCENTRIC
4 PCS. STOP 150MM
2 PCS. STOP 225MM
2 PCS STOP 260MM
1 PC. STOP WITH ANGLE INDICATOR
4 PCS. ANGLE STOP 275
2 PCS. ANGLE STOP 320
2 PCS. ANGLE STOP 350MM
4 PCS. ANGLE 185X185MM
1 PC. ANGLE NO. 10
2 PCS. ANGLE NO. 11
OTHER ACCESSORIES ON REQUEST. SEE PICTURE.



THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: WMT GmbH & Co. KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)