333 ofertas

Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-
description
brand	cleveland
model	tket-6t
id	7296
status	active
price	1.500 € + vat
year of manufacture	1999
location	oradea (ro)

twin steam jacketed tilting kettle, cleveland tket-6t manufactured in 1999, made of stainless steel with manual tilting for easy drain, steam jacket filled with treated water that does not require refilling or venting. the temperature control is accurate and consistant with a solid state temperature control (mechanical thermostate are less accurate),  operating temperature range from 145° - 260°f (63°c - 127°c), control panel includes: led indicator for heat cycle, led indicator for low water, power on/off switch, adjustable temperature control dial. rear mounted easy access pressure gauge and pressure relief valve to prevent tampering. color coded easy to read pressure gauge with DESCRIPTION BRAND CLEVELAND MODEL TKET-6T ID 7296 STATUS ACTIVE PRICE 1.500 € + VAT YEAR OF MANUFACTURE 1999 LOCATION ORADEA (RO) TWIN STEAM JACKETED TILTING KETTLE, CLEVELAND TKET-6T MANUFACTURED IN 1999, MADE OF STAINLESS STEEL WITH MANUAL TILTING FOR EASY DRAIN, STEAM JACKET FILLED WITH TREATED WATER THAT DOES NOT REQUIRE REFILLING OR VENTING. THE TEMPERATURE CONTROL IS ACCURATE AND CONSISTANT WITH A SOLID STATE TEMPERATURE CONTROL (MECHANICAL THERMOSTATE ARE LESS ACCURATE), OPERATING TEMPERATURE RANGE FROM 145° - 260°F (63°C - 127°C), CONTROL PANEL INCLUDES: LED INDICATOR FOR HEAT CYCLE, LED INDICATOR FOR LOW WATER, POWER ON/OFF SWITCH, ADJUSTABLE TEMPERATURE CONTROL DIAL. REAR MOUNTED EASY ACCESS PRESSURE GAUGE AND PRESSURE RELIEF VALVE TO PREVENT TAMPERING. COLOR CODED EASY TO READ PRESSURE GAUGE WITH "GREEN" AND "VENT AIR ZONE", SAFETY VALVE FOR PRESSURES GREATER THAN 50 PSI. EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Precio: 12.900 €
Ubicación: Land-; gross weight [kg]: 3170; rear tyres remaining: 40; front tyres remaining: 40; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 3170; REAR TYRES REMAINING: 40; FRONT TYRES REMAINING: 40; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 69.000 €
Ubicación: Land-commission commissioned holztransport-truck in dream state

manufacturer volvo
type fh 540
first registration 06 / 2012
mileage 678.000 km
euro 5 / adblue
green sticker

where to sleep shift (automatic - manual gearbox electropneumatically switched)
atriebsformel 6 x 4
leaf / air / air suspension
differential locks
a off traction control
hill start assist

short woodie riedler
maximum log length 6 meters
maximum loading width between the stanchions 2.30 meters
four longitudinal sliding exte-telescopic stanchions

foldable rear crane epsilon palfinger m 120.1 with high seat in 2012
with air spring scale, display on the crane and the cab
wood gripper hultdins gl c50 from 2012

technically permissible laden weight: 30,000 kg
in the member state permitted overall weight: 26,000 kg
empty weight: 14.795 kg
possible payload: 15.205 kg
allowable payload: 11.205 kg

trailer coupling foot with duomatik air connections
working lights front and rear

large driver's cab with full facilities
retarder
cruise control
automatic climate control
leather seats sleeping cabin / bunk
electric windows
electric mirror adjustment
multi function steering wheel
phone integration
alcoa alloy rims
and much more...

73450 neresheim price plus 19% vat from site
mistakes and intermediate sale is reserved COMMISSION COMMISSIONED HOLZTRANSPORT-TRUCK IN DREAM STATE MANUFACTURER VOLVO TYPE FH 540 FIRST REGISTRATION 06 / 2012 MILEAGE 678.000 KM EURO 5 / ADBLUE GREEN STICKER WHERE TO SLEEP SHIFT (AUTOMATIC - MANUAL GEARBOX ELECTROPNEUMATICALLY SWITCHED) ATRIEBSFORMEL 6 X 4 LEAF / AIR / AIR SUSPENSION DIFFERENTIAL LOCKS A OFF TRACTION CONTROL HILL START ASSIST SHORT WOODIE RIEDLER MAXIMUM LOG LENGTH 6 METERS MAXIMUM LOADING WIDTH BETWEEN THE STANCHIONS 2.30 METERS FOUR LONGITUDINAL SLIDING EXTE-TELESCOPIC STANCHIONS FOLDABLE REAR CRANE EPSILON PALFINGER M 120.1 WITH HIGH SEAT IN 2012 WITH AIR SPRING SCALE, DISPLAY ON THE CRANE AND THE CAB WOOD GRIPPER HULTDINS GL C50 FROM 2012 TECHNICALLY PERMISSIBLE LADEN WEIGHT: 30,000 KG IN THE MEMBER STATE PERMITTED OVERALL WEIGHT: 26,000 KG EMPTY WEIGHT: 14.795 KG POSSIBLE PAYLOAD: 15.205 KG ALLOWABLE PAYLOAD: 11.205 KG TRAILER COUPLING FOOT WITH DUOMATIK AIR CONNECTIONS WORKING LIGHTS FRONT AND REAR LARGE DRIVER'S CAB WITH FULL FACILITIES RETARDER CRUISE CONTROL AUTOMATIC CLIMATE CONTROL LEATHER SEATS SLEEPING CABIN / BUNK ELECTRIC WINDOWS ELECTRIC MIRROR ADJUSTMENT MULTI FUNCTION STEERING WHEEL PHONE INTEGRATION ALCOA ALLOY RIMS AND MUCH MORE... 73450 NERESHEIM PRICE PLUS 19% VAT FROM SITE MISTAKES AND INTERMEDIATE SALE IS RESERVED
Vendedor: Umrath Handel & Verwertung
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9180; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9180; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-iwk tube filling type tfs 10 year 2005 for plastic and metal tubes.
power 25-60 tubes/min, tube diameter 11-52 mm, tube sheath length 50-250 mm.
dosing range 2.0-400 ml

included:
-tube tray tzm, max. 100 tubes/min.
-heated hopper
-agitator
-punch
-div. rotary vane
-div. pneumatic shut-off nozzles
-div. piston
-wide range of accessories
-documents IWK TUBE FILLING TYPE TFS 10 YEAR 2005 FOR PLASTIC AND METAL TUBES. POWER 25-60 TUBES/MIN, TUBE DIAMETER 11-52 MM, TUBE SHEATH LENGTH 50-250 MM. DOSING RANGE 2.0-400 ML INCLUDED: -TUBE TRAY TZM, MAX. 100 TUBES/MIN. -HEATED HOPPER -AGITATOR -PUNCH -DIV. ROTARY VANE -DIV. PNEUMATIC SHUT-OFF NOZZLES -DIV. PISTON -WIDE RANGE OF ACCESSORIES -DOCUMENTS
Vendedor: Remontag
Año de construcción: usado
Precio: 10.900 €
Ubicación: Land-; gross weight [kg]: 2990; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 2990; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-we are pleased to offer: 
heidelberg stitchmaster st 100 
year: 2008 
specification 
6 station + cover feeder 
operating facility, an output range of up to 9,000 cycles/h, 
product formats up to a4 oversize and the technical standard 
equipment make the stitchmaster st 100 the machine to 
launch into saddle-stitching. 
. 

double vertical feeder 
the st 100 can be extended to a total of 4 double vertical feeders at any time. with a few simple adjustments, the double vertical 
feeders can be connected or disconnected or run at half 
(1:2) or full (1:1) speed. 
cover folder feeder 
vertical fed covers which can be scored inner and outer 
depending on the cover quality and the paper grain 
direction 

stitcher 
standard with two stitching heads for 14 mm standard 
stitching 
trimmer 
product trimming is carried out with all transfer belts completely stationary. 
the trim sequence is foredge first, 
then head and tail simultaneously, to a maximum trim off the width of up to 50 mm on all three sides. face trim adjustment is possible during the course of production. 
technical data: 
output 
mechanical max. 9,000 cycles/h 
min. 1,500 cycles/h 
formats face x spine 
untrimmed max. 311 x 355 mm 
min. 92 x 128 mm 
trimmed max. 305 x 349 mm 
min. 89 x 120 mm 

product thickness 
max. 10 mm 
stitching heads 
max. up to 4 standard 
or loop stitching heads 

the offer includes a rima stacking model rs 1112 
s/n: 118986-10 
400 volt, 50/60 h2 
3.8 amp, 1.5 kw 
5.5 bar, 80 psi   WE ARE PLEASED TO OFFER: HEIDELBERG STITCHMASTER ST 100 YEAR: 2008 SPECIFICATION 6 STATION + COVER FEEDER OPERATING FACILITY, AN OUTPUT RANGE OF UP TO 9,000 CYCLES/H, PRODUCT FORMATS UP TO A4 OVERSIZE AND THE TECHNICAL STANDARD EQUIPMENT MAKE THE STITCHMASTER ST 100 THE MACHINE TO LAUNCH INTO SADDLE-STITCHING. . DOUBLE VERTICAL FEEDER THE ST 100 CAN BE EXTENDED TO A TOTAL OF 4 DOUBLE VERTICAL FEEDERS AT ANY TIME. WITH A FEW SIMPLE ADJUSTMENTS, THE DOUBLE VERTICAL FEEDERS CAN BE CONNECTED OR DISCONNECTED OR RUN AT HALF (1:2) OR FULL (1:1) SPEED. COVER FOLDER FEEDER VERTICAL FED COVERS WHICH CAN BE SCORED INNER AND OUTER DEPENDING ON THE COVER QUALITY AND THE PAPER GRAIN DIRECTION STITCHER STANDARD WITH TWO STITCHING HEADS FOR 14 MM STANDARD STITCHING TRIMMER PRODUCT TRIMMING IS CARRIED OUT WITH ALL TRANSFER BELTS COMPLETELY STATIONARY. THE TRIM SEQUENCE IS FOREDGE FIRST, THEN HEAD AND TAIL SIMULTANEOUSLY, TO A MAXIMUM TRIM OFF THE WIDTH OF UP TO 50 MM ON ALL THREE SIDES. FACE TRIM ADJUSTMENT IS POSSIBLE DURING THE COURSE OF PRODUCTION. TECHNICAL DATA: OUTPUT MECHANICAL MAX. 9,000 CYCLES/H MIN. 1,500 CYCLES/H FORMATS FACE X SPINE UNTRIMMED MAX. 311 X 355 MM MIN. 92 X 128 MM TRIMMED MAX. 305 X 349 MM MIN. 89 X 120 MM PRODUCT THICKNESS MAX. 10 MM STITCHING HEADS MAX. UP TO 4 STANDARD OR LOOP STITCHING HEADS THE OFFER INCLUDES A RIMA STACKING MODEL RS 1112 S/N: 118986-10 400 VOLT, 50/60 H2 3.8 AMP, 1.5 KW 5.5 BAR, 80 PSI
Vendedor: Jerry Curtin Limited
Año de construcción: usado
Precio: 14.900 €
Ubicación: Land-; gross weight [kg]: 6010; rear tyres remaining: 40; front tyres remaining: 40; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6010; REAR TYRES REMAINING: 40; FRONT TYRES REMAINING: 40; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-new surplus rotary screw air compressors
new surplus five (5) rotary screw air compressor systems, 50 hz, still in manufactures packaging, never assembled. rotary screw compressors are available due to a cancelled project. great opportunity to purchase new rotary screw air compressors below new purchase cost
two (2) dvk 133-gp-9300 rotary screw air compressor systems
dvk 60
bar  psi  m3/min  scfm
7.5  110  7.2     254
10   145  6.4     226
13   190  5.4     191
2 x dvk 60 oil injected rotary screw compressors mounted on platform
1 x da 360 heatless desiccant dryer
1 x da 360 heatless desiccant dryer
2 x go500mx general purpose high efficiency air line filter
2 x go500my oil removal high efficiency air line filter
2 x go500mx general purpose high efficiency air line filter
1 x all the equipment mounted on a platform and piping has been done
1 x d-mat 8 oil/water separator with support sheet-metal
1 x dht 1 wet air receiver
1 x logik 103 external multi controller
1 x dht 10 dry air receiver
 50 hz frequency

three (3) dvk 140-gp-1000 rotary screw air compressor systems
dvk 125
bar  psi  m3/min  scfm
7.5  110  15.8     557
10   145  13.5     477
13   190  11        388
1 x dvk 125 oil ?njected rotary screw compressor
1 x dvk 125 oil ?njected rotary screw compressor
1 x dvk 125 oil ?njected rotary screw compressor
1 x d-mat 30 oil/water separator with support sheet-metal
1 x dht 5 wet air receiver
1 x logik 103 external multi controller
1 x compressor skid for 3 pcs dvk 125
2 x go1820mx general purpose high efficiency air line filter with support sheet-
1 x collector for 140-gp-1000
1 x cables, cable ducts, solenoid valves, hoses for 140-gp-1000
1 x cable ducts, solenoid valves, hoses , 133-gp-9300 collector
8 x oil for compressors 20 liters x 8 pieces plastic can total 160 liters oil
50 hz frequency

NEW SURPLUS ROTARY SCREW AIR COMPRESSORS NEW SURPLUS FIVE (5) ROTARY SCREW AIR COMPRESSOR SYSTEMS, 50 HZ, STILL IN MANUFACTURES PACKAGING, NEVER ASSEMBLED. ROTARY SCREW COMPRESSORS ARE AVAILABLE DUE TO A CANCELLED PROJECT. GREAT OPPORTUNITY TO PURCHASE NEW ROTARY SCREW AIR COMPRESSORS BELOW NEW PURCHASE COST TWO (2) DVK 133-GP-9300 ROTARY SCREW AIR COMPRESSOR SYSTEMS DVK 60 BAR PSI M3/MIN SCFM 7.5 110 7.2 254 10 145 6.4 226 13 190 5.4 191 2 X DVK 60 OIL INJECTED ROTARY SCREW COMPRESSORS MOUNTED ON PLATFORM 1 X DA 360 HEATLESS DESICCANT DRYER 1 X DA 360 HEATLESS DESICCANT DRYER 2 X GO500MX GENERAL PURPOSE HIGH EFFICIENCY AIR LINE FILTER 2 X GO500MY OIL REMOVAL HIGH EFFICIENCY AIR LINE FILTER 2 X GO500MX GENERAL PURPOSE HIGH EFFICIENCY AIR LINE FILTER 1 X ALL THE EQUIPMENT MOUNTED ON A PLATFORM AND PIPING HAS BEEN DONE 1 X D-MAT 8 OIL/WATER SEPARATOR WITH SUPPORT SHEET-METAL 1 X DHT 1 WET AIR RECEIVER 1 X LOGIK 103 EXTERNAL MULTI CONTROLLER 1 X DHT 10 DRY AIR RECEIVER 50 HZ FREQUENCY THREE (3) DVK 140-GP-1000 ROTARY SCREW AIR COMPRESSOR SYSTEMS DVK 125 BAR PSI M3/MIN SCFM 7.5 110 15.8 557 10 145 13.5 477 13 190 11 388 1 X DVK 125 OIL ?NJECTED ROTARY SCREW COMPRESSOR 1 X DVK 125 OIL ?NJECTED ROTARY SCREW COMPRESSOR 1 X DVK 125 OIL ?NJECTED ROTARY SCREW COMPRESSOR 1 X D-MAT 30 OIL/WATER SEPARATOR WITH SUPPORT SHEET-METAL 1 X DHT 5 WET AIR RECEIVER 1 X LOGIK 103 EXTERNAL MULTI CONTROLLER 1 X COMPRESSOR SKID FOR 3 PCS DVK 125 2 X GO1820MX GENERAL PURPOSE HIGH EFFICIENCY AIR LINE FILTER WITH SUPPORT SHEET- 1 X COLLECTOR FOR 140-GP-1000 1 X CABLES, CABLE DUCTS, SOLENOID VALVES, HOSES FOR 140-GP-1000 1 X CABLE DUCTS, SOLENOID VALVES, HOSES , 133-GP-9300 COLLECTOR 8 X OIL FOR COMPRESSORS 20 LITERS X 8 PIECES PLASTIC CAN TOTAL 160 LITERS OIL 50 HZ FREQUENCY
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Precio: 14.900 €
Ubicación: Land-; gross weight [kg]: 7450; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7450; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-72 mw westinghouse gas turbine generator plant
complete 47 mw westinghouse w251-b11 gas turbine with a brush electric generator, 3000 rpm, 50 hz, 11.5 kv, natural gas fuel, the 72 mw westinghouse gas turbine generator plant is being offered with oem overhaul with zero hrs. of run time. plant has been well maintained since new. complete power plant.
1.	25 mw mitsubishi steam turbine, steam pressure: 86 bar/1260 psi
2.	boiler; aalborg keystone hp/lp system
3.	electrical system
4.	exhaust system
5.	starting system
6.	cooling system
7.	transformers
72 MW WESTINGHOUSE GAS TURBINE GENERATOR PLANT COMPLETE 47 MW WESTINGHOUSE W251-B11 GAS TURBINE WITH A BRUSH ELECTRIC GENERATOR, 3000 RPM, 50 HZ, 11.5 KV, NATURAL GAS FUEL, THE 72 MW WESTINGHOUSE GAS TURBINE GENERATOR PLANT IS BEING OFFERED WITH OEM OVERHAUL WITH ZERO HRS. OF RUN TIME. PLANT HAS BEEN WELL MAINTAINED SINCE NEW. COMPLETE POWER PLANT. 1. 25 MW MITSUBISHI STEAM TURBINE, STEAM PRESSURE: 86 BAR/1260 PSI 2. BOILER; AALBORG KEYSTONE HP/LP SYSTEM 3. ELECTRICAL SYSTEM 4. EXHAUST SYSTEM 5. STARTING SYSTEM 6. COOLING SYSTEM 7. TRANSFORMERS
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Precio: 27.500 €
Ubicación: Land-; gross weight [kg]: 6450; rear tyres remaining: 60; front tyres remaining: 60; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6450; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-6ton/3ton air hammer and 7inch/6inch/6inch upsetter



1. 6ton air drop hammer

make:erie(usa)

installation year:1996

rated power:6ton

cylinder bore:558mm

stroke:1270mm

ram to sow block minium:508mm

between guides:762mm

ram front back:965mm

front back:1803mm

left right:3556mm

hight above floor ft.&:0~533mm

head room to drop in rod ft.&:177mm~

 

2. 3ton air drop hammer

make:banning(usa)

installation year:1996

blow energy:12500kgm

type:double column forging machine

stroke:1250mm

number of strokes per minute:125/min

max. dieheihgt:700mm

anvil weight:60ton

machine total weight:90ton

 

3.  7inch(177mm)upsetter

make: azax(usa)

installation year;1979

width of dies:711.2mm

height of dies:889mmmm

thickness of dies:304.8mm

stroke of header:508mm

stroke of dies:241.3mm

motor:93kw

upsetter pressure:1750ton

stroke per minute:25

motor rpm:870



4.  6inch(152mm)upsetter

make: national(usa)

installation year;1983

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:508mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:870

 

5.  6inch(152mm)upsetter

make: national(usa)

installation year;1988

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:457.2mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:860

 

6. billet shear caddy 80

make:peddinghaus(germany)

installation year;1991

shear pressure:400ton

stroke rate(idling):51/min

drive:45kw,380v

air pressure:5~6psi

machine weight:11.3ton

machine size:2275 x3250 x1950mm

 

7. billet shear caddy 50

make:peddinghaus(germany)

installation year;2006

shear pressure:90ton

stroke rate(idling):63/min

drive:11kw,380v

air pressure:5~kgf/cm2

machine weight:2150kg

machine size:1350 x2080 x1330mm

 

8. 600ton trimming press

make:hosung(korea)

installation year:1996

working force:600ton

length of stroke:350mm

spm:26

dieheight:730mm

opening height:1080mm

adjustment slide:200mm

slide area:1150mm x1280mm

bolster area:1200x1300mm

side opening:730x880mm

working height:750mm

air pressure:5kg/cm2

die cushion :40ton

die cushion stroke:180mm

diecushion area of pad:810mm x810mm

main motor:45kw x 6p

 

9. 630ton trimming press

make:hosung(korea)

installation year:1978

working force:630ton

length of stroke:400mm

spm:20

shutheight::570mm

bed area:1250mm x1250mm

ram area:1000x1000mm

air pressure:5kg/cm2

main motor:61kw

floor space:3600mm x3470mm

 

10.compressor

make:kobe(japan)

installation year:1983

motro:255kw

 6TON/3TON AIR HAMMER AND 7INCH/6INCH/6INCH UPSETTER 1. 6TON AIR DROP HAMMER MAKE:ERIE(USA) INSTALLATION YEAR:1996 RATED POWER:6TON CYLINDER BORE:558MM STROKE:1270MM RAM TO SOW BLOCK MINIUM:508MM BETWEEN GUIDES:762MM RAM FRONT BACK:965MM FRONT BACK:1803MM LEFT RIGHT:3556MM HIGHT ABOVE FLOOR FT.&:0~533MM HEAD ROOM TO DROP IN ROD FT.&:177MM~ 2. 3TON AIR DROP HAMMER MAKE:BANNING(USA) INSTALLATION YEAR:1996 BLOW ENERGY:12500KGM TYPE:DOUBLE COLUMN FORGING MACHINE STROKE:1250MM NUMBER OF STROKES PER MINUTE:125/MIN MAX. DIEHEIHGT:700MM ANVIL WEIGHT:60TON MACHINE TOTAL WEIGHT:90TON 3. 7INCH(177MM)UPSETTER MAKE: AZAX(USA) INSTALLATION YEAR;1979 WIDTH OF DIES:711.2MM HEIGHT OF DIES:889MMMM THICKNESS OF DIES:304.8MM STROKE OF HEADER:508MM STROKE OF DIES:241.3MM MOTOR:93KW UPSETTER PRESSURE:1750TON STROKE PER MINUTE:25 MOTOR RPM:870 4. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1983 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:508MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:870 5. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1988 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:457.2MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:860 6. BILLET SHEAR CADDY 80 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;1991 SHEAR PRESSURE:400TON STROKE RATE(IDLING):51/MIN DRIVE:45KW,380V AIR PRESSURE:5~6PSI MACHINE WEIGHT:11.3TON MACHINE SIZE:2275 X3250 X1950MM 7. BILLET SHEAR CADDY 50 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;2006 SHEAR PRESSURE:90TON STROKE RATE(IDLING):63/MIN DRIVE:11KW,380V AIR PRESSURE:5~KGF/CM2 MACHINE WEIGHT:2150KG MACHINE SIZE:1350 X2080 X1330MM 8. 600TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1996 WORKING FORCE:600TON LENGTH OF STROKE:350MM SPM:26 DIEHEIGHT:730MM OPENING HEIGHT:1080MM ADJUSTMENT SLIDE:200MM SLIDE AREA:1150MM X1280MM BOLSTER AREA:1200X1300MM SIDE OPENING:730X880MM WORKING HEIGHT:750MM AIR PRESSURE:5KG/CM2 DIE CUSHION :40TON DIE CUSHION STROKE:180MM DIECUSHION AREA OF PAD:810MM X810MM MAIN MOTOR:45KW X 6P 9. 630TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1978 WORKING FORCE:630TON LENGTH OF STROKE:400MM SPM:20 SHUTHEIGHT::570MM BED AREA:1250MM X1250MM RAM AREA:1000X1000MM AIR PRESSURE:5KG/CM2 MAIN MOTOR:61KW FLOOR SPACE:3600MM X3470MM 10.COMPRESSOR MAKE:KOBE(JAPAN) INSTALLATION YEAR:1983 MOTRO:255KW
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 14.900 €
Ubicación: Land-; gross weight [kg]: 7445; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7445; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-6ton/3ton air hammer and 7inch/6inch/6inch upsetter



1. 6ton air drop hammer

make:erie(usa)

installation year:1996

rated power:6ton

cylinder bore:558mm

stroke:1270mm

ram to sow block minium:508mm

between guides:762mm

ram front back:965mm

front back:1803mm

left right:3556mm

hight above floor ft.&:0~533mm

head room to drop in rod ft.&:177mm~

 

2. 3ton air drop hammer

make:banning(usa)

installation year:1996

blow energy:12500kgm

type:double column forging machine

stroke:1250mm

number of strokes per minute:125/min

max. dieheihgt:700mm

anvil weight:60ton

machine total weight:90ton

 

3.  7inch(177mm)upsetter

make: azax(usa)

installation year;1979

width of dies:711.2mm

height of dies:889mmmm

thickness of dies:304.8mm

stroke of header:508mm

stroke of dies:241.3mm

motor:93kw

upsetter pressure:1750ton

stroke per minute:25

motor rpm:870



4.  6inch(152mm)upsetter

make: national(usa)

installation year;1983

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:508mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:870

 

5.  6inch(152mm)upsetter

make: national(usa)

installation year;1988

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:457.2mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:860

 

6. billet shear caddy 80

make:peddinghaus(germany)

installation year;1991

shear pressure:400ton

stroke rate(idling):51/min

drive:45kw,380v

air pressure:5~6psi

machine weight:11.3ton

machine size:2275 x3250 x1950mm

 

7. billet shear caddy 50

make:peddinghaus(germany)

installation year;2006

shear pressure:90ton

stroke rate(idling):63/min

drive:11kw,380v

air pressure:5~kgf/cm2

machine weight:2150kg

machine size:1350 x2080 x1330mm

 

8. 600ton trimming press

make:hosung(korea)

installation year:1996

working force:600ton

length of stroke:350mm

spm:26

dieheight:730mm

opening height:1080mm

adjustment slide:200mm

slide area:1150mm x1280mm

bolster area:1200x1300mm

side opening:730x880mm

working height:750mm

air pressure:5kg/cm2

die cushion :40ton

die cushion stroke:180mm

diecushion area of pad:810mm x810mm

main motor:45kw x 6p

 

9. 630ton trimming press

make:hosung(korea)

installation year:1978

working force:630ton

length of stroke:400mm

spm:20

shutheight::570mm

bed area:1250mm x1250mm

ram area:1000x1000mm

air pressure:5kg/cm2

main motor:61kw

floor space:3600mm x3470mm

 

10.compressor

make:kobe(japan)

installation year:1983

motro:255kw

 6TON/3TON AIR HAMMER AND 7INCH/6INCH/6INCH UPSETTER 1. 6TON AIR DROP HAMMER MAKE:ERIE(USA) INSTALLATION YEAR:1996 RATED POWER:6TON CYLINDER BORE:558MM STROKE:1270MM RAM TO SOW BLOCK MINIUM:508MM BETWEEN GUIDES:762MM RAM FRONT BACK:965MM FRONT BACK:1803MM LEFT RIGHT:3556MM HIGHT ABOVE FLOOR FT.&:0~533MM HEAD ROOM TO DROP IN ROD FT.&:177MM~ 2. 3TON AIR DROP HAMMER MAKE:BANNING(USA) INSTALLATION YEAR:1996 BLOW ENERGY:12500KGM TYPE:DOUBLE COLUMN FORGING MACHINE STROKE:1250MM NUMBER OF STROKES PER MINUTE:125/MIN MAX. DIEHEIHGT:700MM ANVIL WEIGHT:60TON MACHINE TOTAL WEIGHT:90TON 3. 7INCH(177MM)UPSETTER MAKE: AZAX(USA) INSTALLATION YEAR;1979 WIDTH OF DIES:711.2MM HEIGHT OF DIES:889MMMM THICKNESS OF DIES:304.8MM STROKE OF HEADER:508MM STROKE OF DIES:241.3MM MOTOR:93KW UPSETTER PRESSURE:1750TON STROKE PER MINUTE:25 MOTOR RPM:870 4. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1983 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:508MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:870 5. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1988 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:457.2MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:860 6. BILLET SHEAR CADDY 80 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;1991 SHEAR PRESSURE:400TON STROKE RATE(IDLING):51/MIN DRIVE:45KW,380V AIR PRESSURE:5~6PSI MACHINE WEIGHT:11.3TON MACHINE SIZE:2275 X3250 X1950MM 7. BILLET SHEAR CADDY 50 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;2006 SHEAR PRESSURE:90TON STROKE RATE(IDLING):63/MIN DRIVE:11KW,380V AIR PRESSURE:5~KGF/CM2 MACHINE WEIGHT:2150KG MACHINE SIZE:1350 X2080 X1330MM 8. 600TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1996 WORKING FORCE:600TON LENGTH OF STROKE:350MM SPM:26 DIEHEIGHT:730MM OPENING HEIGHT:1080MM ADJUSTMENT SLIDE:200MM SLIDE AREA:1150MM X1280MM BOLSTER AREA:1200X1300MM SIDE OPENING:730X880MM WORKING HEIGHT:750MM AIR PRESSURE:5KG/CM2 DIE CUSHION :40TON DIE CUSHION STROKE:180MM DIECUSHION AREA OF PAD:810MM X810MM MAIN MOTOR:45KW X 6P 9. 630TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1978 WORKING FORCE:630TON LENGTH OF STROKE:400MM SPM:20 SHUTHEIGHT::570MM BED AREA:1250MM X1250MM RAM AREA:1000X1000MM AIR PRESSURE:5KG/CM2 MAIN MOTOR:61KW FLOOR SPACE:3600MM X3470MM 10.COMPRESSOR MAKE:KOBE(JAPAN) INSTALLATION YEAR:1983 MOTRO:255KW
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 830; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 830; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-6ton/3ton air hammer and 7inch/6inch/6inch upsetter

1. 6ton air drop hammer

make:erie(usa)

installation year:1996

rated power:6ton

cylinder bore:558mm

stroke:1270mm

ram to sow block minium:508mm

between guides:762mm

ram front back:965mm

front back:1803mm

left right:3556mm

hight above floor ft.&:0~533mm

head room to drop in rod ft.&:177mm~

 

2. 3ton air drop hammer

make:banning(usa)

installation year:1996

blow energy:12500kgm

type:double column forging machine

stroke:1250mm

number of strokes per minute:125/min

max. dieheihgt:700mm

anvil weight:60ton

machine total weight:90ton

 

3.  7inch(177mm)upsetter

make: azax(usa)

installation year;1979

width of dies:711.2mm

height of dies:889mmmm

thickness of dies:304.8mm

stroke of header:508mm

stroke of dies:241.3mm

motor:93kw

upsetter pressure:1750ton

stroke per minute:25

motor rpm:870



4.  6inch(152mm)upsetter

make: national(usa)

installation year;1983

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:508mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:870

 

5.  6inch(152mm)upsetter

make: national(usa)

installation year;1988

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:457.2mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:860

 

6. billet shear caddy 80

make:peddinghaus(germany)

installation year;1991

shear pressure:400ton

stroke rate(idling):51/min

drive:45kw,380v

air pressure:5~6psi

machine weight:11.3ton

machine size:2275 x3250 x1950mm

 

7. billet shear caddy 50

make:peddinghaus(germany)

installation year;2006

shear pressure:90ton

stroke rate(idling):63/min

drive:11kw,380v

air pressure:5~kgf/cm2

machine weight:2150kg

machine size:1350 x2080 x1330mm

 

8. 600ton trimming press

make:hosung(korea)

installation year:1996

working force:600ton

length of stroke:350mm

spm:26

dieheight:730mm

opening height:1080mm

adjustment slide:200mm

slide area:1150mm x1280mm

bolster area:1200x1300mm

side opening:730x880mm

working height:750mm

air pressure:5kg/cm2

die cushion :40ton

die cushion stroke:180mm

diecushion area of pad:810mm x810mm

main motor:45kw x 6p

 

9. 630ton trimming press

make:hosung(korea)

installation year:1978

working force:630ton

length of stroke:400mm

spm:20

shutheight::570mm

bed area:1250mm x1250mm

ram area:1000x1000mm

air pressure:5kg/cm2

main motor:61kw

floor space:3600mm x3470mm

 

10.compressor

make:kobe(japan)

installation year:1983

motro:255kw

 6TON/3TON AIR HAMMER AND 7INCH/6INCH/6INCH UPSETTER 1. 6TON AIR DROP HAMMER MAKE:ERIE(USA) INSTALLATION YEAR:1996 RATED POWER:6TON CYLINDER BORE:558MM STROKE:1270MM RAM TO SOW BLOCK MINIUM:508MM BETWEEN GUIDES:762MM RAM FRONT BACK:965MM FRONT BACK:1803MM LEFT RIGHT:3556MM HIGHT ABOVE FLOOR FT.&:0~533MM HEAD ROOM TO DROP IN ROD FT.&:177MM~ 2. 3TON AIR DROP HAMMER MAKE:BANNING(USA) INSTALLATION YEAR:1996 BLOW ENERGY:12500KGM TYPE:DOUBLE COLUMN FORGING MACHINE STROKE:1250MM NUMBER OF STROKES PER MINUTE:125/MIN MAX. DIEHEIHGT:700MM ANVIL WEIGHT:60TON MACHINE TOTAL WEIGHT:90TON 3. 7INCH(177MM)UPSETTER MAKE: AZAX(USA) INSTALLATION YEAR;1979 WIDTH OF DIES:711.2MM HEIGHT OF DIES:889MMMM THICKNESS OF DIES:304.8MM STROKE OF HEADER:508MM STROKE OF DIES:241.3MM MOTOR:93KW UPSETTER PRESSURE:1750TON STROKE PER MINUTE:25 MOTOR RPM:870 4. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1983 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:508MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:870 5. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1988 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:457.2MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:860 6. BILLET SHEAR CADDY 80 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;1991 SHEAR PRESSURE:400TON STROKE RATE(IDLING):51/MIN DRIVE:45KW,380V AIR PRESSURE:5~6PSI MACHINE WEIGHT:11.3TON MACHINE SIZE:2275 X3250 X1950MM 7. BILLET SHEAR CADDY 50 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;2006 SHEAR PRESSURE:90TON STROKE RATE(IDLING):63/MIN DRIVE:11KW,380V AIR PRESSURE:5~KGF/CM2 MACHINE WEIGHT:2150KG MACHINE SIZE:1350 X2080 X1330MM 8. 600TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1996 WORKING FORCE:600TON LENGTH OF STROKE:350MM SPM:26 DIEHEIGHT:730MM OPENING HEIGHT:1080MM ADJUSTMENT SLIDE:200MM SLIDE AREA:1150MM X1280MM BOLSTER AREA:1200X1300MM SIDE OPENING:730X880MM WORKING HEIGHT:750MM AIR PRESSURE:5KG/CM2 DIE CUSHION :40TON DIE CUSHION STROKE:180MM DIECUSHION AREA OF PAD:810MM X810MM MAIN MOTOR:45KW X 6P 9. 630TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1978 WORKING FORCE:630TON LENGTH OF STROKE:400MM SPM:20 SHUTHEIGHT::570MM BED AREA:1250MM X1250MM RAM AREA:1000X1000MM AIR PRESSURE:5KG/CM2 MAIN MOTOR:61KW FLOOR SPACE:3600MM X3470MM 10.COMPRESSOR MAKE:KOBE(JAPAN) INSTALLATION YEAR:1983 MOTRO:255KW
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-; gross weight [kg]: 790; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 790; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-ref.-no. 00539
machine: fully automatic plate bearing remmert
manufacturer remmert
type: rbpl 5000
year of construction: 2010

technical data:
type: rbpl 5000
year of construction: 2010
storage bin: 243
maximum load per pallet: 5000kg (50kn)
maximum plate format: 4000 x 2000 (maxi format)
shelf length/height: 51 m / 6 m
speed/speed: 100 m / min.    24m / min.

equipment of the machine: 4 pieces normal retrieval stations with station wagons
1 piece storage station (loading with a crane or lift truck possible)
2 piece out-feed stations with own stations-rgb's and 4 buffer creation
all stations with their own station computers
1 piece shelf set with so-called "bridge" (at the exit of the cross)
circumferential protective fence (3 pages)
laser measurement for lã¤ngsverfahrweg
a total 243 locations with 200 pallets
bela de height 90 mm, 360 mm (2 campsites occupied.)

accessories various spare parts, photoelectric hoist, proximity switches, touch-screen monitor for stations, stations-keyboard, etc.
condition: very good, all maintenance carried out regularly
closing date for mid-june 2019
 REF.-NO. 00539 MACHINE: FULLY AUTOMATIC PLATE BEARING REMMERT MANUFACTURER REMMERT TYPE: RBPL 5000 YEAR OF CONSTRUCTION: 2010 TECHNICAL DATA: TYPE: RBPL 5000 YEAR OF CONSTRUCTION: 2010 STORAGE BIN: 243 MAXIMUM LOAD PER PALLET: 5000KG (50KN) MAXIMUM PLATE FORMAT: 4000 X 2000 (MAXI FORMAT) SHELF LENGTH/HEIGHT: 51 M / 6 M SPEED/SPEED: 100 M / MIN. 24M / MIN. EQUIPMENT OF THE MACHINE: 4 PIECES NORMAL RETRIEVAL STATIONS WITH STATION WAGONS 1 PIECE STORAGE STATION (LOADING WITH A CRANE OR LIFT TRUCK POSSIBLE) 2 PIECE OUT-FEED STATIONS WITH OWN STATIONS-RGB'S AND 4 BUFFER CREATION ALL STATIONS WITH THEIR OWN STATION COMPUTERS 1 PIECE SHELF SET WITH SO-CALLED "BRIDGE" (AT THE EXIT OF THE CROSS) CIRCUMFERENTIAL PROTECTIVE FENCE (3 PAGES) LASER MEASUREMENT FOR LäNGSVERFAHRWEG A TOTAL 243 LOCATIONS WITH 200 PALLETS BELA DE HEIGHT 90 MM, 360 MM (2 CAMPSITES OCCUPIED.) ACCESSORIES VARIOUS SPARE PARTS, PHOTOELECTRIC HOIST, PROXIMITY SWITCHES, TOUCH-SCREEN MONITOR FOR STATIONS, STATIONS-KEYBOARD, ETC. CONDITION: VERY GOOD, ALL MAINTENANCE CARRIED OUT REGULARLY CLOSING DATE FOR MID-JUNE 2019
Vendedor: tuerer machinery brokers & consulting
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 15500; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 350 ; GROSS WEIGHT [KG]: 15500; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 350
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-stock number: 3290
inductions heater
manufacturer: fag, type: heater psi 24-400
machine no.: 10167, year of construction: 2011

specifications: automatic residual magnetism
max.                        			28 kva

STOCK NUMBER: 3290 INDUCTIONS HEATER MANUFACTURER: FAG, TYPE: HEATER PSI 24-400 MACHINE NO.: 10167, YEAR OF CONSTRUCTION: 2011 SPECIFICATIONS: AUTOMATIC RESIDUAL MAGNETISM MAX. 28 KVA
Vendedor: DenTool LTD
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 15500; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 350 ; GROSS WEIGHT [KG]: 15500; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 350
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-horizontal - bending machine macc hp
230 - 01-99-035
shipping time: immediately

id: 01-99-035

manufacturer: macc
type: hp 230

machine data
year of construction: approx. 1990
l x w x h: approx. 3500 x 800 x 1200 mm
weight: about 5000 kg

good general condition

technical data
hydrulische horizontal - bending machine
control: conventional

maximum working pressure: 250 psi
maximum bending capacity: approx. 230 tons

accessories
â?¢ hydraulikaggregt
â?¢ various stamp

other accessories on request
price and other specifications on request HORIZONTAL - BENDING MACHINE MACC HP 230 - 01-99-035 SHIPPING TIME: IMMEDIATELY ID: 01-99-035 MANUFACTURER: MACC TYPE: HP 230 MACHINE DATA YEAR OF CONSTRUCTION: APPROX. 1990 L X W X H: APPROX. 3500 X 800 X 1200 MM WEIGHT: ABOUT 5000 KG GOOD GENERAL CONDITION TECHNICAL DATA HYDRULISCHE HORIZONTAL - BENDING MACHINE CONTROL: CONVENTIONAL MAXIMUM WORKING PRESSURE: 250 PSI MAXIMUM BENDING CAPACITY: APPROX. 230 TONS ACCESSORIES Â?¢ HYDRAULIKAGGREGT Â?¢ VARIOUS STAMP OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 15500; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 350 ; GROSS WEIGHT [KG]: 15500; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 350
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-mesh welding line for mining mesh and reinforcement wire diameter: 3-6.35 mm number of line wires: 25
line wires: cros off coil wires: off coil wire coil max weight: 2000 kg wire coil types: spooled coils produced on collapsible spools. layer would'nt coils
			produced on a dead block. 
panel width: 2438,4 mm (8 ft) panel length: 6096,00 mm (20 ft) line wire pitch: 50,200,300 mm (2 ", 4", 6 ")
cross wire length: 2438 mm - min. 1219 mm cross wire pitch: variable from 50 mm number of weld presses: 25 (6kn) transformers: 7 x 200 kva welding = 1400 kva total: direct welding system to suit mining mesh requirements, with constant
			current weld control mining mesh: 4 x 8 ft panels, 5 x 10 ft panels, 4 "x 4" pitching cross wires to be flush trimmed after welding one weld press via welded intersection for mining mesh products reinforcing mesh: pitching: 2438 m - 6000 mm long by 100 mm / 150mm 
 MESH WELDING LINE FOR MINING MESH AND REINFORCEMENT WIRE DIAMETER: 3-6.35 MM NUMBER OF LINE WIRES: 25 LINE WIRES: CROS OFF COIL WIRES: OFF COIL WIRE COIL MAX WEIGHT: 2000 KG WIRE COIL TYPES: SPOOLED COILS PRODUCED ON COLLAPSIBLE SPOOLS. LAYER WOULD'NT COILS PRODUCED ON A DEAD BLOCK. PANEL WIDTH: 2438,4 MM (8 FT) PANEL LENGTH: 6096,00 MM (20 FT) LINE WIRE PITCH: 50,200,300 MM (2 ", 4", 6 ") CROSS WIRE LENGTH: 2438 MM - MIN. 1219 MM CROSS WIRE PITCH: VARIABLE FROM 50 MM NUMBER OF WELD PRESSES: 25 (6KN) TRANSFORMERS: 7 X 200 KVA WELDING = 1400 KVA TOTAL: DIRECT WELDING SYSTEM TO SUIT MINING MESH REQUIREMENTS, WITH CONSTANT CURRENT WELD CONTROL MINING MESH: 4 X 8 FT PANELS, 5 X 10 FT PANELS, 4 "X 4" PITCHING CROSS WIRES TO BE FLUSH TRIMMED AFTER WELDING ONE WELD PRESS VIA WELDED INTERSECTION FOR MINING MESH PRODUCTS REINFORCING MESH: PITCHING: 2438 M - 6000 MM LONG BY 100 MM / 150MM
Vendedor: Wirecon GmbH
Año de construcción: usado
Precio: 39.500 €
Ubicación: Land-; gross weight [kg]: 21100; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 250 ; GROSS WEIGHT [KG]: 21100; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 250
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-6ton/3ton air hammer and 7inch/6inch/6inch upsetter



1. 6ton air drop hammer

make:erie(usa)

installation year:1996

rated power:6ton

cylinder bore:558mm

stroke:1270mm

ram to sow block minium:508mm

between guides:762mm

ram front back:965mm

front back:1803mm

left right:3556mm

hight above floor ft.&:0~533mm

head room to drop in rod ft.&:177mm~

 

2. 3ton air drop hammer

make:banning(usa)

installation year:1996

blow energy:12500kgm

type:double column forging machine

stroke:1250mm

number of strokes per minute:125/min

max. dieheihgt:700mm

anvil weight:60ton

machine total weight:90ton

 

3.  7inch(177mm)upsetter

make: azax(usa)

installation year;1979

width of dies:711.2mm

height of dies:889mmmm

thickness of dies:304.8mm

stroke of header:508mm

stroke of dies:241.3mm

motor:93kw

upsetter pressure:1750ton

stroke per minute:25

motor rpm:870



4.  6inch(152mm)upsetter

make: national(usa)

installation year;1983

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:508mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:870

 

5.  6inch(152mm)upsetter

make: national(usa)

installation year;1988

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:457.2mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:860

 

6. billet shear caddy 80

make:peddinghaus(germany)

installation year;1991

shear pressure:400ton

stroke rate(idling):51/min

drive:45kw,380v

air pressure:5~6psi

machine weight:11.3ton

machine size:2275 x3250 x1950mm

 

7. billet shear caddy 50

make:peddinghaus(germany)

installation year;2006

shear pressure:90ton

stroke rate(idling):63/min

drive:11kw,380v

air pressure:5~kgf/cm2

machine weight:2150kg

machine size:1350 x2080 x1330mm

 

8. 600ton trimming press

make:hosung(korea)

installation year:1996

working force:600ton

length of stroke:350mm

spm:26

dieheight:730mm

opening height:1080mm

adjustment slide:200mm

slide area:1150mm x1280mm

bolster area:1200x1300mm

side opening:730x880mm

working height:750mm

air pressure:5kg/cm2

die cushion :40ton

die cushion stroke:180mm

diecushion area of pad:810mm x810mm

main motor:45kw x 6p

 

9. 630ton trimming press

make:hosung(korea)

installation year:1978

working force:630ton

length of stroke:400mm

spm:20

shutheight::570mm

bed area:1250mm x1250mm

ram area:1000x1000mm

air pressure:5kg/cm2

main motor:61kw

floor space:3600mm x3470mm

 

10.compressor

make:kobe(japan)

installation year:1983

motro:255kw



---------------------------------------------------------- 
bmj korea co.,ltd.
director: jongduk baek
fax: +82-51-719-9678
mobile: +82-10-7499-2567
e-mail: whitebel64@gmail.com
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea 6TON/3TON AIR HAMMER AND 7INCH/6INCH/6INCH UPSETTER 1. 6TON AIR DROP HAMMER MAKE:ERIE(USA) INSTALLATION YEAR:1996 RATED POWER:6TON CYLINDER BORE:558MM STROKE:1270MM RAM TO SOW BLOCK MINIUM:508MM BETWEEN GUIDES:762MM RAM FRONT BACK:965MM FRONT BACK:1803MM LEFT RIGHT:3556MM HIGHT ABOVE FLOOR FT.&:0~533MM HEAD ROOM TO DROP IN ROD FT.&:177MM~ 2. 3TON AIR DROP HAMMER MAKE:BANNING(USA) INSTALLATION YEAR:1996 BLOW ENERGY:12500KGM TYPE:DOUBLE COLUMN FORGING MACHINE STROKE:1250MM NUMBER OF STROKES PER MINUTE:125/MIN MAX. DIEHEIHGT:700MM ANVIL WEIGHT:60TON MACHINE TOTAL WEIGHT:90TON 3. 7INCH(177MM)UPSETTER MAKE: AZAX(USA) INSTALLATION YEAR;1979 WIDTH OF DIES:711.2MM HEIGHT OF DIES:889MMMM THICKNESS OF DIES:304.8MM STROKE OF HEADER:508MM STROKE OF DIES:241.3MM MOTOR:93KW UPSETTER PRESSURE:1750TON STROKE PER MINUTE:25 MOTOR RPM:870 4. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1983 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:508MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:870 5. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1988 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:457.2MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:860 6. BILLET SHEAR CADDY 80 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;1991 SHEAR PRESSURE:400TON STROKE RATE(IDLING):51/MIN DRIVE:45KW,380V AIR PRESSURE:5~6PSI MACHINE WEIGHT:11.3TON MACHINE SIZE:2275 X3250 X1950MM 7. BILLET SHEAR CADDY 50 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;2006 SHEAR PRESSURE:90TON STROKE RATE(IDLING):63/MIN DRIVE:11KW,380V AIR PRESSURE:5~KGF/CM2 MACHINE WEIGHT:2150KG MACHINE SIZE:1350 X2080 X1330MM 8. 600TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1996 WORKING FORCE:600TON LENGTH OF STROKE:350MM SPM:26 DIEHEIGHT:730MM OPENING HEIGHT:1080MM ADJUSTMENT SLIDE:200MM SLIDE AREA:1150MM X1280MM BOLSTER AREA:1200X1300MM SIDE OPENING:730X880MM WORKING HEIGHT:750MM AIR PRESSURE:5KG/CM2 DIE CUSHION :40TON DIE CUSHION STROKE:180MM DIECUSHION AREA OF PAD:810MM X810MM MAIN MOTOR:45KW X 6P 9. 630TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1978 WORKING FORCE:630TON LENGTH OF STROKE:400MM SPM:20 SHUTHEIGHT::570MM BED AREA:1250MM X1250MM RAM AREA:1000X1000MM AIR PRESSURE:5KG/CM2 MAIN MOTOR:61KW FLOOR SPACE:3600MM X3470MM 10.COMPRESSOR MAKE:KOBE(JAPAN) INSTALLATION YEAR:1983 MOTRO:255KW ---------------------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK FAX: +82-51-719-9678 MOBILE: +82-10-7499-2567 E-MAIL: WHITEBEL64@GMAIL.COM ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 2575; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 2575; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-ton/3ton air hammer and 7inch/6inch/6inch upsetter



1. 6ton air drop hammer

make:erie(usa)

installation year:1996

rated power:6ton

cylinder bore:558mm

stroke:1270mm

ram to sow block minium:508mm

between guides:762mm

ram front back:965mm

front back:1803mm

left right:3556mm

hight above floor ft.&:0~533mm

head room to drop in rod ft.&:177mm~

 

2. 3ton air drop hammer

make:banning(usa)

installation year:1996

blow energy:12500kgm

type:double column forging machine

stroke:1250mm

number of strokes per minute:125/min

max. dieheihgt:700mm

anvil weight:60ton

machine total weight:90ton

 

3.  7inch(177mm)upsetter

make: azax(usa)

installation year;1979

width of dies:711.2mm

height of dies:889mmmm

thickness of dies:304.8mm

stroke of header:508mm

stroke of dies:241.3mm

motor:93kw

upsetter pressure:1750ton

stroke per minute:25

motor rpm:870



4.  6inch(152mm)upsetter

make: national(usa)

installation year;1983

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:508mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:870

 

5.  6inch(152mm)upsetter

make: national(usa)

installation year;1988

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:457.2mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:860

 

6. billet shear caddy 80

make:peddinghaus(germany)

installation year;1991

shear pressure:400ton

stroke rate(idling):51/min

drive:45kw,380v

air pressure:5~6psi

machine weight:11.3ton

machine size:2275 x3250 x1950mm

 

7. billet shear caddy 50

make:peddinghaus(germany)

installation year;2006

shear pressure:90ton

stroke rate(idling):63/min

drive:11kw,380v

air pressure:5~kgf/cm2

machine weight:2150kg

machine size:1350 x2080 x1330mm

 

8. 600ton trimming press

make:hosung(korea)

installation year:1996

working force:600ton

length of stroke:350mm

spm:26

dieheight:730mm

opening height:1080mm

adjustment slide:200mm

slide area:1150mm x1280mm

bolster area:1200x1300mm

side opening:730x880mm

working height:750mm

air pressure:5kg/cm2

die cushion :40ton

die cushion stroke:180mm

diecushion area of pad:810mm x810mm

main motor:45kw x 6p

 

9. 630ton trimming press

make:hosung(korea)

installation year:1978

working force:630ton

length of stroke:400mm

spm:20

shutheight::570mm

bed area:1250mm x1250mm

ram area:1000x1000mm

air pressure:5kg/cm2

main motor:61kw

floor space:3600mm x3470mm

 

10.compressor

make:kobe(japan)

installation year:1983

motro:255kw



---------------------------------------------------------- 
bmj korea co.,ltd.
director: jongduk baek
fax: +82-51-719-9678
mobile: +82-10-7499-2567
e-mail: whitebel64@gmail.com
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea
 TON/3TON AIR HAMMER AND 7INCH/6INCH/6INCH UPSETTER 1. 6TON AIR DROP HAMMER MAKE:ERIE(USA) INSTALLATION YEAR:1996 RATED POWER:6TON CYLINDER BORE:558MM STROKE:1270MM RAM TO SOW BLOCK MINIUM:508MM BETWEEN GUIDES:762MM RAM FRONT BACK:965MM FRONT BACK:1803MM LEFT RIGHT:3556MM HIGHT ABOVE FLOOR FT.&:0~533MM HEAD ROOM TO DROP IN ROD FT.&:177MM~ 2. 3TON AIR DROP HAMMER MAKE:BANNING(USA) INSTALLATION YEAR:1996 BLOW ENERGY:12500KGM TYPE:DOUBLE COLUMN FORGING MACHINE STROKE:1250MM NUMBER OF STROKES PER MINUTE:125/MIN MAX. DIEHEIHGT:700MM ANVIL WEIGHT:60TON MACHINE TOTAL WEIGHT:90TON 3. 7INCH(177MM)UPSETTER MAKE: AZAX(USA) INSTALLATION YEAR;1979 WIDTH OF DIES:711.2MM HEIGHT OF DIES:889MMMM THICKNESS OF DIES:304.8MM STROKE OF HEADER:508MM STROKE OF DIES:241.3MM MOTOR:93KW UPSETTER PRESSURE:1750TON STROKE PER MINUTE:25 MOTOR RPM:870 4. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1983 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:508MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:870 5. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1988 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:457.2MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:860 6. BILLET SHEAR CADDY 80 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;1991 SHEAR PRESSURE:400TON STROKE RATE(IDLING):51/MIN DRIVE:45KW,380V AIR PRESSURE:5~6PSI MACHINE WEIGHT:11.3TON MACHINE SIZE:2275 X3250 X1950MM 7. BILLET SHEAR CADDY 50 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;2006 SHEAR PRESSURE:90TON STROKE RATE(IDLING):63/MIN DRIVE:11KW,380V AIR PRESSURE:5~KGF/CM2 MACHINE WEIGHT:2150KG MACHINE SIZE:1350 X2080 X1330MM 8. 600TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1996 WORKING FORCE:600TON LENGTH OF STROKE:350MM SPM:26 DIEHEIGHT:730MM OPENING HEIGHT:1080MM ADJUSTMENT SLIDE:200MM SLIDE AREA:1150MM X1280MM BOLSTER AREA:1200X1300MM SIDE OPENING:730X880MM WORKING HEIGHT:750MM AIR PRESSURE:5KG/CM2 DIE CUSHION :40TON DIE CUSHION STROKE:180MM DIECUSHION AREA OF PAD:810MM X810MM MAIN MOTOR:45KW X 6P 9. 630TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1978 WORKING FORCE:630TON LENGTH OF STROKE:400MM SPM:20 SHUTHEIGHT::570MM BED AREA:1250MM X1250MM RAM AREA:1000X1000MM AIR PRESSURE:5KG/CM2 MAIN MOTOR:61KW FLOOR SPACE:3600MM X3470MM 10.COMPRESSOR MAKE:KOBE(JAPAN) INSTALLATION YEAR:1983 MOTRO:255KW ---------------------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK FAX: +82-51-719-9678 MOBILE: +82-10-7499-2567 E-MAIL: WHITEBEL64@GMAIL.COM ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 15500; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 350 ; GROSS WEIGHT [KG]: 15500; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 350
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-6ton/3ton air hammer and 7inch/6inch/6inch upsetter



1. 6ton air drop hammer

make:erie(usa)

installation year:1996

rated power:6ton

cylinder bore:558mm

stroke:1270mm

ram to sow block minium:508mm

between guides:762mm

ram front back:965mm

front back:1803mm

left right:3556mm

hight above floor ft.&:0~533mm

head room to drop in rod ft.&:177mm~

 

2. 3ton air drop hammer

make:banning(usa)

installation year:1996

blow energy:12500kgm

type:double column forging machine

stroke:1250mm

number of strokes per minute:125/min

max. dieheihgt:700mm

anvil weight:60ton

machine total weight:90ton

 

3.  7inch(177mm)upsetter

make: azax(usa)

installation year;1979

width of dies:711.2mm

height of dies:889mmmm

thickness of dies:304.8mm

stroke of header:508mm

stroke of dies:241.3mm

motor:93kw

upsetter pressure:1750ton

stroke per minute:25

motor rpm:870



4.  6inch(152mm)upsetter

make: national(usa)

installation year;1983

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:508mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:870

 

5.  6inch(152mm)upsetter

make: national(usa)

installation year;1988

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:457.2mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:860

 

6. billet shear caddy 80

make:peddinghaus(germany)

installation year;1991

shear pressure:400ton

stroke rate(idling):51/min

drive:45kw,380v

air pressure:5~6psi

machine weight:11.3ton

machine size:2275 x3250 x1950mm

 

7. billet shear caddy 50

make:peddinghaus(germany)

installation year;2006

shear pressure:90ton

stroke rate(idling):63/min

drive:11kw,380v

air pressure:5~kgf/cm2

machine weight:2150kg

machine size:1350 x2080 x1330mm

 

8. 600ton trimming press

make:hosung(korea)

installation year:1996

working force:600ton

length of stroke:350mm

spm:26

dieheight:730mm

opening height:1080mm

adjustment slide:200mm

slide area:1150mm x1280mm

bolster area:1200x1300mm

side opening:730x880mm

working height:750mm

air pressure:5kg/cm2

die cushion :40ton

die cushion stroke:180mm

diecushion area of pad:810mm x810mm

main motor:45kw x 6p

 

9. 630ton trimming press

make:hosung(korea)

installation year:1978

working force:630ton

length of stroke:400mm

spm:20

shutheight::570mm

bed area:1250mm x1250mm

ram area:1000x1000mm

air pressure:5kg/cm2

main motor:61kw

floor space:3600mm x3470mm

 

10.compressor

make:kobe(japan)

installation year:1983

motro:255kw



---------------------------------------------------------- 
bmj korea co.,ltd.
director: jongduk baek
fax: +82-51-719-9678
mobile: +82-10-7499-2567
e-mail: whitebel64@gmail.com
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea
 6TON/3TON AIR HAMMER AND 7INCH/6INCH/6INCH UPSETTER 1. 6TON AIR DROP HAMMER MAKE:ERIE(USA) INSTALLATION YEAR:1996 RATED POWER:6TON CYLINDER BORE:558MM STROKE:1270MM RAM TO SOW BLOCK MINIUM:508MM BETWEEN GUIDES:762MM RAM FRONT BACK:965MM FRONT BACK:1803MM LEFT RIGHT:3556MM HIGHT ABOVE FLOOR FT.&:0~533MM HEAD ROOM TO DROP IN ROD FT.&:177MM~ 2. 3TON AIR DROP HAMMER MAKE:BANNING(USA) INSTALLATION YEAR:1996 BLOW ENERGY:12500KGM TYPE:DOUBLE COLUMN FORGING MACHINE STROKE:1250MM NUMBER OF STROKES PER MINUTE:125/MIN MAX. DIEHEIHGT:700MM ANVIL WEIGHT:60TON MACHINE TOTAL WEIGHT:90TON 3. 7INCH(177MM)UPSETTER MAKE: AZAX(USA) INSTALLATION YEAR;1979 WIDTH OF DIES:711.2MM HEIGHT OF DIES:889MMMM THICKNESS OF DIES:304.8MM STROKE OF HEADER:508MM STROKE OF DIES:241.3MM MOTOR:93KW UPSETTER PRESSURE:1750TON STROKE PER MINUTE:25 MOTOR RPM:870 4. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1983 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:508MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:870 5. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1988 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:457.2MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:860 6. BILLET SHEAR CADDY 80 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;1991 SHEAR PRESSURE:400TON STROKE RATE(IDLING):51/MIN DRIVE:45KW,380V AIR PRESSURE:5~6PSI MACHINE WEIGHT:11.3TON MACHINE SIZE:2275 X3250 X1950MM 7. BILLET SHEAR CADDY 50 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;2006 SHEAR PRESSURE:90TON STROKE RATE(IDLING):63/MIN DRIVE:11KW,380V AIR PRESSURE:5~KGF/CM2 MACHINE WEIGHT:2150KG MACHINE SIZE:1350 X2080 X1330MM 8. 600TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1996 WORKING FORCE:600TON LENGTH OF STROKE:350MM SPM:26 DIEHEIGHT:730MM OPENING HEIGHT:1080MM ADJUSTMENT SLIDE:200MM SLIDE AREA:1150MM X1280MM BOLSTER AREA:1200X1300MM SIDE OPENING:730X880MM WORKING HEIGHT:750MM AIR PRESSURE:5KG/CM2 DIE CUSHION :40TON DIE CUSHION STROKE:180MM DIECUSHION AREA OF PAD:810MM X810MM MAIN MOTOR:45KW X 6P 9. 630TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1978 WORKING FORCE:630TON LENGTH OF STROKE:400MM SPM:20 SHUTHEIGHT::570MM BED AREA:1250MM X1250MM RAM AREA:1000X1000MM AIR PRESSURE:5KG/CM2 MAIN MOTOR:61KW FLOOR SPACE:3600MM X3470MM 10.COMPRESSOR MAKE:KOBE(JAPAN) INSTALLATION YEAR:1983 MOTRO:255KW ---------------------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK FAX: +82-51-719-9678 MOBILE: +82-10-7499-2567 E-MAIL: WHITEBEL64@GMAIL.COM ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 50.000 €
Ubicación: Land-brand due t 
axqua model 
year 2009
technical characteristics:

pump motor power (kw): 50 kw
maximum output flow (l/min): 3.6
max. pressure (cutting head) psi/bar: 55000/3792
max. nozzle diameter (mm): 0.36
stroke dimensions (mm): x: 1800, y: 3200, z: 150
total weight (kg): 3200
machine weight at full load (water): 20.000
complete datasheet available in the photo section
for more information and vision of the machinery contact us at +39 030 725026 from monday to friday from 8:30 a.m. to 1:00 p.m. and from 2:00 p.m. to 7:00 p.m.
  BRAND DUE T AXQUA MODEL YEAR 2009 TECHNICAL CHARACTERISTICS: PUMP MOTOR POWER (KW): 50 KW MAXIMUM OUTPUT FLOW (L/MIN): 3.6 MAX. PRESSURE (CUTTING HEAD) PSI/BAR: 55000/3792 MAX. NOZZLE DIAMETER (MM): 0.36 STROKE DIMENSIONS (MM): X: 1800, Y: 3200, Z: 150 TOTAL WEIGHT (KG): 3200 MACHINE WEIGHT AT FULL LOAD (WATER): 20.000 COMPLETE DATASHEET AVAILABLE IN THE PHOTO SECTION FOR MORE INFORMATION AND VISION OF THE MACHINERY CONTACT US AT +39 030 725026 FROM MONDAY TO FRIDAY FROM 8:30 A.M. TO 1:00 P.M. AND FROM 2:00 P.M. TO 7:00 P.M.
Vendedor: Remarketin Way s.r.l,
Año de construcción: usado
Precio: 18.900 €
Ubicación: Land-; gross weight [kg]: 11710; rear tyres remaining: 30; front tyres remaining: 30; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 11710; REAR TYRES REMAINING: 30; FRONT TYRES REMAINING: 30; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-cnc machining center matra mch 560

manufacturer: matra
 type: mch 560
 year of construction: 1983
 control: fanuc system gm model b

technical data:

table dimensions/pallet 23 5/8 "x 19-11/16"

table indexing angle: increment 1 degree
 longitudinal travel x 28 "710 mm
 spindle head off y-axis 22 "560 mm
 table traverse z axis 22 "560 mm
 ok table to spindle center 3-15/16-26 "100-660 mm/30-590 mm
 center of the table and spindle head 6 "- 28" 150-710 mm
 spindle taper jis b6101 no50
 spindle diameter 3-1/2 "diameter 90 mm
 spindle speed 40-4000 min
 spindle motor ws 8, 5kw, 11 ps(kontin.) 11kw, 15hp (30 min.)
 rapid traverse rate of 480 rpm 12 m / min
 cutting feed rate 1-197 ipm 1-5000 mm / min
 table load 1760 lbs 800 kg
 weight 10000 kg
 dimensions: 3450 x 4500 mm

automatic tool changer:
 maximum number of tools 36
 bpxgbm7u
 tool size: 105 mm diameter, length 350 mm
 weight: 20kg

hydraulic unit:
 fuel tank 90 l
 pump drive 5 s 3.7 kwx4polig
 delivery pressure max 770 psi 55 kgf / cmâ²
capacity 30 l / min

spindle head lubrication unit:
 tank capacity 31 l
 pump drive 1/4 hp 200w x 4-pin

tools and accessories on request! CNC MACHINING CENTER MATRA MCH 560 MANUFACTURER: MATRA TYPE: MCH 560 YEAR OF CONSTRUCTION: 1983 CONTROL: FANUC SYSTEM GM MODEL B TECHNICAL DATA: TABLE DIMENSIONS/PALLET 23 5/8 "X 19-11/16" TABLE INDEXING ANGLE: INCREMENT 1 DEGREE LONGITUDINAL TRAVEL X 28 "710 MM SPINDLE HEAD OFF Y-AXIS 22 "560 MM TABLE TRAVERSE Z AXIS 22 "560 MM OK TABLE TO SPINDLE CENTER 3-15/16-26 "100-660 MM/30-590 MM CENTER OF THE TABLE AND SPINDLE HEAD 6 "- 28" 150-710 MM SPINDLE TAPER JIS B6101 NO50 SPINDLE DIAMETER 3-1/2 "DIAMETER 90 MM SPINDLE SPEED 40-4000 MIN SPINDLE MOTOR WS 8, 5KW, 11 PS(KONTIN.) 11KW, 15HP (30 MIN.) RAPID TRAVERSE RATE OF 480 RPM 12 M / MIN CUTTING FEED RATE 1-197 IPM 1-5000 MM / MIN TABLE LOAD 1760 LBS 800 KG WEIGHT 10000 KG DIMENSIONS: 3450 X 4500 MM AUTOMATIC TOOL CHANGER: MAXIMUM NUMBER OF TOOLS 36 BPXGBM7U TOOL SIZE: 105 MM DIAMETER, LENGTH 350 MM WEIGHT: 20KG HYDRAULIC UNIT: FUEL TANK 90 L PUMP DRIVE 5 S 3.7 KWX4POLIG DELIVERY PRESSURE MAX 770 PSI 55 KGF / CM² CAPACITY 30 L / MIN SPINDLE HEAD LUBRICATION UNIT: TANK CAPACITY 31 L PUMP DRIVE 1/4 HP 200W X 4-PIN TOOLS AND ACCESSORIES ON REQUEST!
Vendedor: RM-Industrieservice Lager und Büro
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-this is a used 5,000 lph apv gaulin type 37-3p homogeniser which is a poppet valve machine & has a max. working pressure of 2900 psi (200 bar).

features                    
•manufacturer: apv
•model: gaulin 37-3, p
•serial number: 98l35199           
•function: homogeniser
•capacity: 5,000 litres/per hour 
•year of manufacture: 1998 
•max. working pressure: 200 bar (2900 psi)
•valve design: poppet
•number of stages: 2-stage
•total installed power: 37 kw (1465 r/min)
•electrics: 380v / 3phase / 50hz
•finish: stainless steel covers
•instruction manual included 

dimensions        
•depth: 170 cms 
•width: 140 cms 
•height: 170 cms
•weight: 1500 kgs

country of manufacture
germany
   THIS IS A USED 5,000 LPH APV GAULIN TYPE 37-3P HOMOGENISER WHICH IS A POPPET VALVE MACHINE & HAS A MAX. WORKING PRESSURE OF 2900 PSI (200 BAR). FEATURES •MANUFACTURER: APV •MODEL: GAULIN 37-3, P •SERIAL NUMBER: 98L35199 •FUNCTION: HOMOGENISER •CAPACITY: 5,000 LITRES/PER HOUR •YEAR OF MANUFACTURE: 1998 •MAX. WORKING PRESSURE: 200 BAR (2900 PSI) •VALVE DESIGN: POPPET •NUMBER OF STAGES: 2-STAGE •TOTAL INSTALLED POWER: 37 KW (1465 R/MIN) •ELECTRICS: 380V / 3PHASE / 50HZ •FINISH: STAINLESS STEEL COVERS •INSTRUCTION MANUAL INCLUDED DIMENSIONS •DEPTH: 170 CMS •WIDTH: 140 CMS •HEIGHT: 170 CMS •WEIGHT: 1500 KGS COUNTRY OF MANUFACTURE GERMANY
Vendedor: Machinery World Ltd
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land--a bottle of kapsiteetti 15.000/hour
-new control system siemens simatic s7
-wash the machine across the 50 flush gripstar
-filling machine fillstar 60 filling heads
-korkituskone arol capping head 10
-cap: spco 28 type 1881
-a bottle of 1.5 l and 0.5 l of type

 -A BOTTLE OF KAPSITEETTI 15.000/HOUR -NEW CONTROL SYSTEM SIEMENS SIMATIC S7 -WASH THE MACHINE ACROSS THE 50 FLUSH GRIPSTAR -FILLING MACHINE FILLSTAR 60 FILLING HEADS -KORKITUSKONE AROL CAPPING HEAD 10 -CAP: SPCO 28 TYPE 1881 -A BOTTLE OF 1.5 L AND 0.5 L OF TYPE
Vendedor: Koneikko Oy
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-townsend	
model: 2600	

townsend sausage peeler, stainless steel construction, product dimension capacity 13mm to 36mm diameter casings, 25 psi steam pressure, 75-100 psi air pressure, complete with collection vacuum system, 2? diameter hose, collects waste / castings in vacuum tank 
 TOWNSEND MODEL: 2600 TOWNSEND SAUSAGE PEELER, STAINLESS STEEL CONSTRUCTION, PRODUCT DIMENSION CAPACITY 13MM TO 36MM DIAMETER CASINGS, 25 PSI STEAM PRESSURE, 75-100 PSI AIR PRESSURE, COMPLETE WITH COLLECTION VACUUM SYSTEM, 2? DIAMETER HOSE, COLLECTS WASTE / CASTINGS IN VACUUM TANK
Vendedor: UFM
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-fully automated sheet warehouse 6 out-feed station, 1 storage station, remmert, used 243 storage bins, 200 existing cassettes, max 4000x2000mm, max load per pallet 5000 kg - for sheet metal -:
 
price on request! 
 
manufacturer: remmert
type: rbpl 5000
year of construction: 2010
storage bin: 243
maximum load per pallet: 5000kg (50kn)
maximum plate format: 4000 x 2000 (maxi format)
shelf length: approx. 51 m
height: approx. 6m
width: approx. 7, 85 m (without retrieval stations)
speed/speed: 100 m / min. 24 m / min.
control: remmert prowms
equipment of the machine:
4 piece normal retrieval stations with station wagons
1 piece storage station (loading with a crane or lift truck possible)
2 piece out-feed stations with own stations-rgb's and 4 buffer creation
all stations with their own station computers / control units
1 piece shelf set with so-called "bridge" (at the exit of the cross)
circumferential protective fence (3 pages)
laser measurement for lã¤ngsverfahrweg
a total 243 locations with 200 pallets
bela de height 90 mm, 360 mm (2 campsites occupied.)
various spare parts: light barrier hoist, proximity switches, touch-screen monitor for stations, stations-keyboard, etc.
condition: good - very good, all maintenance carried out regularly
available: from approx. mid 2019
location: nuremberg FULLY AUTOMATED SHEET WAREHOUSE 6 OUT-FEED STATION, 1 STORAGE STATION, REMMERT, USED 243 STORAGE BINS, 200 EXISTING CASSETTES, MAX 4000X2000MM, MAX LOAD PER PALLET 5000 KG - FOR SHEET METAL -: PRICE ON REQUEST! MANUFACTURER: REMMERT TYPE: RBPL 5000 YEAR OF CONSTRUCTION: 2010 STORAGE BIN: 243 MAXIMUM LOAD PER PALLET: 5000KG (50KN) MAXIMUM PLATE FORMAT: 4000 X 2000 (MAXI FORMAT) SHELF LENGTH: APPROX. 51 M HEIGHT: APPROX. 6M WIDTH: APPROX. 7, 85 M (WITHOUT RETRIEVAL STATIONS) SPEED/SPEED: 100 M / MIN. 24 M / MIN. CONTROL: REMMERT PROWMS EQUIPMENT OF THE MACHINE: 4 PIECE NORMAL RETRIEVAL STATIONS WITH STATION WAGONS 1 PIECE STORAGE STATION (LOADING WITH A CRANE OR LIFT TRUCK POSSIBLE) 2 PIECE OUT-FEED STATIONS WITH OWN STATIONS-RGB'S AND 4 BUFFER CREATION ALL STATIONS WITH THEIR OWN STATION COMPUTERS / CONTROL UNITS 1 PIECE SHELF SET WITH SO-CALLED "BRIDGE" (AT THE EXIT OF THE CROSS) CIRCUMFERENTIAL PROTECTIVE FENCE (3 PAGES) LASER MEASUREMENT FOR LäNGSVERFAHRWEG A TOTAL 243 LOCATIONS WITH 200 PALLETS BELA DE HEIGHT 90 MM, 360 MM (2 CAMPSITES OCCUPIED.) VARIOUS SPARE PARTS: LIGHT BARRIER HOIST, PROXIMITY SWITCHES, TOUCH-SCREEN MONITOR FOR STATIONS, STATIONS-KEYBOARD, ETC. CONDITION: GOOD - VERY GOOD, ALL MAINTENANCE CARRIED OUT REGULARLY AVAILABLE: FROM APPROX. MID 2019 LOCATION: NUREMBERG
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-screw air compressor mannesmanndemag
se 70 s - 27-05-001
shipping time: immediately

number: 27-05-001

manufacturer: mannesmann - demag
type: se 70 s

machine data
year of construction: approx. 1990
l x w x h: approx. 2000 x 1000 x 1400 mm
weight: 860 kg

good general condition

technical data - screw air compressor
operating pressure: 10 psi

power: approx. 40 kw

flow rate: approx. 7.2 m 3/min

operating temperature: approximately 75-100 degrees

sound pressure level: approximately 76 db

ambient temperature range: 3-40 degrees
accessories
â?¢ operating instructions

other accessories on request
price and other specifications on request SCREW AIR COMPRESSOR MANNESMANNDEMAG SE 70 S - 27-05-001 SHIPPING TIME: IMMEDIATELY NUMBER: 27-05-001 MANUFACTURER: MANNESMANN - DEMAG TYPE: SE 70 S MACHINE DATA YEAR OF CONSTRUCTION: APPROX. 1990 L X W X H: APPROX. 2000 X 1000 X 1400 MM WEIGHT: 860 KG GOOD GENERAL CONDITION TECHNICAL DATA - SCREW AIR COMPRESSOR OPERATING PRESSURE: 10 PSI POWER: APPROX. 40 KW FLOW RATE: APPROX. 7.2 M 3/MIN OPERATING TEMPERATURE: APPROXIMATELY 75-100 DEGREES SOUND PRESSURE LEVEL: APPROXIMATELY 76 DB AMBIENT TEMPERATURE RANGE: 3-40 DEGREES ACCESSORIES Â?¢ OPERATING INSTRUCTIONS OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 11.900 €
Ubicación: Land-comadis tube filler c135 for kunstofftuben
maximum of 60 tubes/min format sets for tube diameter 22 + 25 + 30 + 35 + 40
volume 10 â?? 150 ml bj. 98. 

not fully funktionstã¤tig
 COMADIS TUBE FILLER C135 FOR KUNSTOFFTUBEN MAXIMUM OF 60 TUBES/MIN FORMAT SETS FOR TUBE DIAMETER 22 + 25 + 30 + 35 + 40 VOLUME 10 �? 150 ML BJ. 98. NOT FULLY FUNKTIONSTäTIG
Vendedor: Füll-Tec GmbH
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6250; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6250; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 7.700 €
Ubicación: Land-bander lifting skirt top 2000 plus
built in 2010
roll edge thickness 0.5-3 mm workpiece thickness 10 mm to 50 mm / 40 mm (fixed)
workpiece length of min 250 mm / 300 mm (fixed)
workpiece width min. approx. 70 mm / 90 mm (fixed)
edge material height of 50 mm / 40 mm(fix)
quick heating glue tank: volume approx.  1 l, heating-up time approx. 5 min, heating power 3,4 kw,.
temperature infinitely variable - 0-220 grade motor roller 0.18 kw
support plate
roles capping: pneumatic 3 mm edge thickness high frequency saw 15,000 u/mm, 0.37 kw
hood lock: opens only to halt the cutting saw high frequency flush cutter units (300 hz): flush - / chamfer, 15,000 rpm, engine
chamfer angle 0-15 degree stepless, 22 and 30 degree
surface scraper
boom: collapsible boards opening, to the front from extendable speed 10 m / min, motor 0.55 kw
overall performance of 6.9 of kw work table height 860 mm dimensions (l x w x h) 3100 x 1320 x 1300 mm weight 660 kg 




  BANDER LIFTING SKIRT TOP 2000 PLUS BUILT IN 2010 ROLL EDGE THICKNESS 0.5-3 MM WORKPIECE THICKNESS 10 MM TO 50 MM / 40 MM (FIXED) WORKPIECE LENGTH OF MIN 250 MM / 300 MM (FIXED) WORKPIECE WIDTH MIN. APPROX. 70 MM / 90 MM (FIXED) EDGE MATERIAL HEIGHT OF 50 MM / 40 MM(FIX) QUICK HEATING GLUE TANK: VOLUME APPROX. 1 L, HEATING-UP TIME APPROX. 5 MIN, HEATING POWER 3,4 KW,. TEMPERATURE INFINITELY VARIABLE - 0-220 GRADE MOTOR ROLLER 0.18 KW SUPPORT PLATE ROLES CAPPING: PNEUMATIC 3 MM EDGE THICKNESS HIGH FREQUENCY SAW 15,000 U/MM, 0.37 KW HOOD LOCK: OPENS ONLY TO HALT THE CUTTING SAW HIGH FREQUENCY FLUSH CUTTER UNITS (300 HZ): FLUSH - / CHAMFER, 15,000 RPM, ENGINE CHAMFER ANGLE 0-15 DEGREE STEPLESS, 22 AND 30 DEGREE SURFACE SCRAPER BOOM: COLLAPSIBLE BOARDS OPENING, TO THE FRONT FROM EXTENDABLE SPEED 10 M / MIN, MOTOR 0.55 KW OVERALL PERFORMANCE OF 6.9 OF KW WORK TABLE HEIGHT 860 MM DIMENSIONS (L X W X H) 3100 X 1320 X 1300 MM WEIGHT 660 KG
Vendedor: Marevi
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more PSI types: