Instalaciones de sierras de cinta RAIMANN Flexirip 6200 Jrionline

Cutting height: max. 140 mm
Motor output: 11 kW
cutting width: 600 mm
Cutting length: 6200 mm
Dimensions (L/W/H): 8300x1750x2090 mm
Weight: 3500 kg
Number of working hours: 3331 h
Raimann FlexiRip Jrionline Automatic Longitudinal Circular Saw
----------------------------------------
Cutting length 6200 mm

Machine base, carriage, feed
----------------------------------------
- Motor according to IE3 standard: 11 kW (15 HP)
- Precise cutting thanks to the self-supporting, torsion-resistant steel
construction and carriage guides on generously dimensioned, hardened, and
ground round steel tracks. Extra-long and wide carriage with ball-bearing
rollers, precisely adjustable and play-free via eccentric axes.
- Clean cutting thanks to the stepless height adjustment of the saw blade
for quick and optimal adjustment of the saw blade projection to the
workpiece thickness. (Levels 1-18)
- Continuously adjustable feed speed
via pedal across the entire cutting length from 1-80 m/min
- Potentiometer for presetting the maximum feed speed
- Anti-blocking system for FlexiRip: If the maximum permissible load is
exceeded, the saw blade automatically lowers to prevent jamming. The saw
carriage then returns to the start position. Your advantage: Reliable
protection against machine overload and sawblade jamming
- Saw shaft speed: 2,900 rpm
- Maximum cutting height:
Sawblade diameter 400 mm: Max. cutting height 65 mm
Sawblade diameter 450 mm: Max. cutting height 90 mm
Sawblade diameter 500 mm: Max. cutting height 115 mm
Sawblade diameter 550 mm: Max. cutting height 140 mm

Width stop and machine table
----------------------------------------
- Width stop adjustment via several control levers on the front of the machine
for precise positioning of the stop with a large digital display, easy to
rotate and tilt.
- Width stop in a cantilever design with 6 pneumatically pivoting stop cams
- Smooth, even, and backlash-free operation of the stop
- Width stop driven by 2 hardened, ground ball screws, 32 mm diameter
- Maximum usable width (standard): 600 mm
- 6 cross chains in the rear machine table, including an extension to the
vibrating feeder with roller conveyor transfer (L = approx. 600 mm) to
the vibrating feeder.

Chain distribution according to the layout plan

Control System
----------------------------------------
- Electronic machine and stop control
PLC control with easy-to-read touchscreen on the left side at the start
of the cut, mounted at eye level, easily adjustable for rotation, tilt,
and height.

Ten different cutting lists can store 10 width dimensions each and easily
retrieved by touching the screen. These dimensions can be accessed either
absolutely or as consecutive dimensions, the latter for working from back
to front.

Furthermore, for the consecutive sequence from back to front, five different
dimensions with target quantities can be stored for automatic board cutting.
- The width stops free travel function can be selected via the touchscreen.
- Error diagnostics via error display and cause note in plain text on the
screen. Hour and cut counters for precise recording and output of
production output.
- Rotatable control panel on the swivel arm is particularly advantageous
when cutting large-format panels.

Operation and Tools
---------------------------------
- Workpiece clamp
mounted on the upper guard beam, inside the slats.
Clamp with positive guidance via racks and torsion shaft. This ensures precise
positioning, parallel to the machine table, even with short or offset
workpieces.Lifting and lowering movements are electro-pneumatically controlled.
Hold-down clamp length: 3000 mm from the start of the cut.
The width stop can be moved to the zero line by up to 40 mm.
The hold-down clamp may only be used on the horizontal surface of the workpiece.

- Zero-cut device for positioning the width stop under the hold-down clamp,
including a special wooden insert with a rubber pressure surface.
Maximum cutting height with zero-cut device: 190 mm
- 3 ball plates with 6 balls each in the front machine table, freely
interchangeable
- Ball plates, connecting the rip saw and miter saw, in the front machine
table on the left, outside the cutting area
- 3 ball plates extended to 800 mm in the front machine table, freely
interchangeable, with floor support

- 1 red laser to indicate the cutting path. 30 mW
This allows the operator to optimally utilize the wood during
trimming and cutting.
Range, depending on lighting conditions: max. 6 m
(If the lighting conditions at the machine location are too bright,
especially for machines with longer cutting lengths, a second laser
is recommended.)

- 1 additional red laser. 30 mW

- Quick and safe sawblade changes thanks to the Easyfix quick-clamping system

and horizontal and vertical riving G5712123 knife guides

- G5712123 Self-opening guard with two gas springs

- Sawblade bore diameter 80 mm
- Riving knife for sawblade diameter 500 mm

Electrical System
----------------------------------------
- Control cabinet integrated into the machine frame
- Voltage/Frequency: 400 V / 50 Hz

Work and Operational Safety
----------------------------------------
- Lowerable saw blade and safety and extraction beam
with transparent and shatter-proof 8 mm thick slats.
- Emergency stop device on the control panel and as a pull cord
over the entire cutting area.
- Clear working conditions thanks to the large opening stroke of the safety
and extraction beam.
- Cable guide chain mounted on the rear of the machine, protected against
waste strips.

Effortless Maintenance
----------------------------------------
- Ground clearance for easy cleaning.
Downward-pivoting cover panels on the front of the machine provide easy
access to the components and, most importantly, allow for quick and easy
removal of any splinters. Connection Data
------------------------
- Permissible ambient temperature between 5 and 35°C
- Extraction nozzle top right Ø 160 mm
- Extraction nozzle bottom left Ø 160 mm
- Extraction air speed 30 m/sec
- Total air consumption 4340 m³/h
- Air connection 6-8 bar

Noise emission
------------------------
Workplace emission value
- Idle: LpA = 75 dB(A)
- During processing: LpA = 88 dB(A)
Sound power
- Idle: LwA = 94 dB(A)
- During processing: LwA = 106 dB(A)
according to EN 1870-8 and ISO 7960 Annex Q
Measurement uncertainty constant K = 4 dB(A)

- Working height 915 mm
- Total length: Cutting length + 2035 mm
- Total width: Usable width + 990 mm
- Height: 2090 mm

Detailed technical information according to the installation plan!

Paint finish:
- Light gray RAL 7035
- Anthracite RAL 7016

(Technical specifications according to the manufacturer - no guarantee!)



The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

seller offer No. resale 1305-2789