48 ofertas

Año de construcción: usado
Ubicación: Land-stationary desilting plant of solids
top hanging bigbag

1 600 mm long
1 370 mm width
height. 2 800 mm
operating voltage 230v / 50 hz
power voltage.  24v ac
el.verbrauch asi 3 kw / h
el. protection. ip 65
operating temperature + 5 c 20a + 40 c.
operating pressure 0,4-0,5 mpa
compressed air consumption 8-45 m
weight approx. 600 kg
stock removal. max 350 kg

information on the system
the basic part of the abrasiventfernungssystems consists of a welded steel construction, on which all the necessary parts are arranged: a pneumatic pump, a slurry pump, an electronic control device for the operation, a mechanical hydro cyclone. stainless steel suction heads, through the water inside the container are + abrasive material is sucked in. this mixture continues through thick-walled tubes by means of air pump to hydro-cyclone, in which water is separated. then goes to hung up big-bag to be water in the auxiliary tank and solid particles. residual water flows through the big-bag to the auxiliary fuel tank and is then pumped through slurry pump in the strainer. big-bag is exchanged when it is filled STATIONARY DESILTING PLANT OF SOLIDS TOP HANGING BIGBAG 1 600 MM LONG 1 370 MM WIDTH HEIGHT. 2 800 MM OPERATING VOLTAGE 230V / 50 HZ POWER VOLTAGE. 24V AC EL.VERBRAUCH ASI 3 KW / H EL. PROTECTION. IP 65 OPERATING TEMPERATURE + 5 C 20A + 40 C. OPERATING PRESSURE 0,4-0,5 MPA COMPRESSED AIR CONSUMPTION 8-45 M WEIGHT APPROX. 600 KG STOCK REMOVAL. MAX 350 KG INFORMATION ON THE SYSTEM THE BASIC PART OF THE ABRASIVENTFERNUNGSSYSTEMS CONSISTS OF A WELDED STEEL CONSTRUCTION, ON WHICH ALL THE NECESSARY PARTS ARE ARRANGED: A PNEUMATIC PUMP, A SLURRY PUMP, AN ELECTRONIC CONTROL DEVICE FOR THE OPERATION, A MECHANICAL HYDRO CYCLONE. STAINLESS STEEL SUCTION HEADS, THROUGH THE WATER INSIDE THE CONTAINER ARE + ABRASIVE MATERIAL IS SUCKED IN. THIS MIXTURE CONTINUES THROUGH THICK-WALLED TUBES BY MEANS OF AIR PUMP TO HYDRO-CYCLONE, IN WHICH WATER IS SEPARATED. THEN GOES TO HUNG UP BIG-BAG TO BE WATER IN THE AUXILIARY TANK AND SOLID PARTICLES. RESIDUAL WATER FLOWS THROUGH THE BIG-BAG TO THE AUXILIARY FUEL TANK AND IS THEN PUMPED THROUGH SLURRY PUMP IN THE STRAINER. BIG-BAG IS EXCHANGED WHEN IT IS FILLED
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-strainer; used - good STRAINER; USED - GOOD
Vendedor: Tipp Umwelt- und Verfahrenstechnik GmbH
Año de construcción: usado
Ubicación: Land-water jet cutting system, as 3-axis version with ballscrew. suitable for pressure up to 4,136 bar. the cutting system is manufactured in europe and components of from well-known manufacturers are installed. the cnc control is an easy to use p 886

dimensions of the working surface of the machine:
-x-axis (portal). .2000 mm
-y-axis (legs).  1000 mm
z axis.  200 mm
-z axis movement by brushless motor
 
overall dimensions of the machine:
-x axis. .  3 420 mm
-y... 4,480 mm
-z axis... 1800 mm

working speeds of the x - and y-axis:
-max.. . 12.000 mm / min

travel speed of the x - and y-axis
-max.. 30, 000 mm / min

working speeds of the z-axis:
-manual supply.....  5000 mm / min
-manual downfeed....  2,000 mm / min
-automatic up - and downward movement. . 5000 mm / min
 
positioning rule:
-repeatability... 0.05 mm
-positioning accuracy. 0.05 mm / 300 mm
 
technical parameters:
compact table with many possibilities
-steel frame construction with integrated stainless steel strainer
-portal of the aluminium beams, which are completely covered by bar
-linear guides with ball rollers
-hardened rack and pinion made of stainless steel
-precision planetary gear with servo motors
-overstay by spraypainted sheet

standard equipment
    aperture, manual valve
    high pressure hose (10 m)
    training in the factory
    documentation
    ce standard WATER JET CUTTING SYSTEM, AS 3-AXIS VERSION WITH BALLSCREW. SUITABLE FOR PRESSURE UP TO 4,136 BAR. THE CUTTING SYSTEM IS MANUFACTURED IN EUROPE AND COMPONENTS OF FROM WELL-KNOWN MANUFACTURERS ARE INSTALLED. THE CNC CONTROL IS AN EASY TO USE P 886 DIMENSIONS OF THE WORKING SURFACE OF THE MACHINE: -X-AXIS (PORTAL). .2000 MM -Y-AXIS (LEGS). 1000 MM Z AXIS. 200 MM -Z AXIS MOVEMENT BY BRUSHLESS MOTOR OVERALL DIMENSIONS OF THE MACHINE: -X AXIS. . 3 420 MM -Y... 4,480 MM -Z AXIS... 1800 MM WORKING SPEEDS OF THE X - AND Y-AXIS: -MAX.. . 12.000 MM / MIN TRAVEL SPEED OF THE X - AND Y-AXIS -MAX.. 30, 000 MM / MIN WORKING SPEEDS OF THE Z-AXIS: -MANUAL SUPPLY..... 5000 MM / MIN -MANUAL DOWNFEED.... 2,000 MM / MIN -AUTOMATIC UP - AND DOWNWARD MOVEMENT. . 5000 MM / MIN POSITIONING RULE: -REPEATABILITY... 0.05 MM -POSITIONING ACCURACY. 0.05 MM / 300 MM TECHNICAL PARAMETERS: COMPACT TABLE WITH MANY POSSIBILITIES -STEEL FRAME CONSTRUCTION WITH INTEGRATED STAINLESS STEEL STRAINER -PORTAL OF THE ALUMINIUM BEAMS, WHICH ARE COMPLETELY COVERED BY BAR -LINEAR GUIDES WITH BALL ROLLERS -HARDENED RACK AND PINION MADE OF STAINLESS STEEL -PRECISION PLANETARY GEAR WITH SERVO MOTORS -OVERSTAY BY SPRAYPAINTED SHEET STANDARD EQUIPMENT APERTURE, MANUAL VALVE HIGH PRESSURE HOSE (10 M) TRAINING IN THE FACTORY DOCUMENTATION CE STANDARD
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-used for wine and fruit juice <br/>id5476 USED FOR WINE AND FRUIT JUICE
ID5476
Vendedor: Seegräber GmbH
Año de construcción: usado
Ubicación: Land-automotive aluminum wheel coating equipment


make: incos(korea)

make year: 2012

size: ?650x300m/m

weight: 30kg

capacity: 16pcs/hr





a. coating line 

1)pre-treatment equipment

hot water: (w)710x(l)1,500x(h)1,120mm

pre degrease: (w)710x(l)1,500x(h)1,120mm

degrease: (w)710x(l)1,500x(h)1,120mm

no 1,2 rinse: (w)710x(l)1,500x(h)1,120mm

deoxidation: (w)710x(l)1,500x(h)1,120mm

no 3,4 rinse: (w)710x(l)1,500x(h)1,120mm

cromate: (w)710x(l)1,500x(h)1,120mm

no 5,6 rinse: (w)710x(l)1,500x(h)1,120mm

d.i. rinse: (w)710x(l)1,500x(h)1,120mm

oven tank: (w)4,630x(l)1,500x(h)1,150mm

aluminum wheel transfer: 2sets

carrier type


2)powder booth

-main body dimension: (w)1,600x(l)3,200x(h)2,320mm

material: sts304, steel

powder collection fan ? moter: 4,500cfmx150mmaqx5.5kw

air manifold

reverse jet pulse valve

final filter

color module: 1,300x890x1,600m/m


3) drying oven

-main body dimension: (w)1,360x(l)6,200x(h)1,500mm

 material: steel

 piping ? valve


4)powder booth

-main body dimension: (w)3,600x(l)5,000x(h)4,400mm

material: assembly type panel

filtering system:

bag filter:610x610x4px10set

ceiling filter

1,000x4,400x10tx3 row

washing system: 3,200x4,900x(h)500m/m

strainer: 820x(h)500m/mx10ea

water curtain: 2400x4900m/m

over flow tank: 250x4,900x(h)350m/m

water circulation: 5.5kw

illumination system: 1000luxx3set

exhaust: 550?x250mmaq


5) drying oven

-main body dimension: (w)2,400x(l)9,200x(h)1,500mm

material: steel

heat medium: piping ? valve


6)powder booth

-main body dimension: (w)1,600x(l)3,200x(h)2,310mm

material: sts304, steel

powder collection fan ? moter: 4,500cfmx150mmaqx5.5kw

air manifold

reverse jet pulse valve

final filter

illumination system

color module: 1,300x890x1,600m/m


7) drying oven

-main body dimension: (w)2,400x(l)6,200x(h)1,500mm

material: steel

heating medium: piping ? valve


8) preliminary drying oven

-main body dimension: (w)1,350x(l)6,200x(h)1,500mm

material: steel

heating medium: piping ? valve


9) conveyor

flow conveyor: 15m

chain conveyor: 4.4m

flow conveyor: 8.4m x2set

chain conveyor: 4.4m

chain conveyor: 8.4m

roller conveyor: 1m

belt conveyor: 10.3m

round roller conveyor: 1.1m

roller conveyor: 2.7m

roller conveyor: 1m

flow conveyor: 20.4m

chain conveyor: 4.4m

flow conveyor: 12.4m x2set

chain conveyor: 4.4m

chain conveyor: 12.4m

roller conveyor: 1m

belt conveyor: 12.8m

roller conveyor: 1m

roller conveyor: 2.5m

roller conveyor: 1m

round roller conveyor: 1.1m

roller conveyor: 0.6m

roller conveyor: 1m

flow conveyor: 15m

chain conveyor: 4.4m

flow conveyor: 8.4m x2set

chain conveyor: 4.4m

chain conveyor: 8.4m

roller conveyor: 8.1m


10) control panel


11) boiler(miura)

model: ez-1500g

cap: 1,500kg/hr

pressure: 10kg/?

blower: 7.5kw


12) heating medium boiler

model : sp-h80

cap : 800,000kcal/hr

temp : 300?c

pressure : 10kg/?

burner : rs-100

heating medium circulation pump : 11kwx2set



13)a.h.u ? a/c tower

(1)a.h.u 1set

2,230x6,075mmx2,175(h)

burner: 500,000kcal/hr

fan: 450cmmx80mmaqx15kw

(2)a/c tower

carbon type(turbo)

2,200x4,450x2,300mm(h)

500?x250mmaqx37kw

w/duct 


14) air compressor

screw type

model: yes75-gla

cap: 10.22?/min

power: 75kw

- air dryer smd-75

- air cooler hi-4c

- air tank:2?

- air filter

- air dryer: hl350k


15) water treatment equipment

water tank:2?(pe)

activated carbon tank:100?

softner tank:100?

micro filter:?180x750m/m

polisher unit:100?x2ea

water storage tank:2?(pe)

r/o unit:4”x40”x3ea

pump 


16) gas scruber

(1)acid scruber

?1,700x(h)4,200m/m

(2)exhaust blower system

150?x180mmaqx11kw

(3)piping line structure

(4)chemical feeding system

(5)control panel






b. in line sputter system 

make: interpark(korea)

make year: 2012

model: iva-186

3chamber 4door type

product: al wheel

size: max24.5”wheel

tact time: 3.2min/carrier


(1) chamber

ch 1,3:900x960x510m/m

ch 2:950x1,140x730m/m

(2) pumping system:

? bestech vp24k

? bestech bm12a

? bestech bt 85a

? sd-14z diffusing pump

? polycold scp-750ch

(3) cathode

? electro magnet cathode

? magntron cathode

(4) dc power

inttech 10kw, 5kwx3units

(5) air cy1. door: 4ea

(6) control system, gauge

(7) chiller: cts-5001 11kw

cts-5001 7.5kw



 AUTOMOTIVE ALUMINUM WHEEL COATING EQUIPMENT MAKE: INCOS(KOREA) MAKE YEAR: 2012 SIZE: ?650X300M/M WEIGHT: 30KG CAPACITY: 16PCS/HR A. COATING LINE 1)PRE-TREATMENT EQUIPMENT HOT WATER: (W)710X(L)1,500X(H)1,120MM PRE DEGREASE: (W)710X(L)1,500X(H)1,120MM DEGREASE: (W)710X(L)1,500X(H)1,120MM NO 1,2 RINSE: (W)710X(L)1,500X(H)1,120MM DEOXIDATION: (W)710X(L)1,500X(H)1,120MM NO 3,4 RINSE: (W)710X(L)1,500X(H)1,120MM CROMATE: (W)710X(L)1,500X(H)1,120MM NO 5,6 RINSE: (W)710X(L)1,500X(H)1,120MM D.I. RINSE: (W)710X(L)1,500X(H)1,120MM OVEN TANK: (W)4,630X(L)1,500X(H)1,150MM ALUMINUM WHEEL TRANSFER: 2SETS CARRIER TYPE 2)POWDER BOOTH -MAIN BODY DIMENSION: (W)1,600X(L)3,200X(H)2,320MM MATERIAL: STS304, STEEL POWDER COLLECTION FAN ? MOTER: 4,500CFMX150MMAQX5.5KW AIR MANIFOLD REVERSE JET PULSE VALVE FINAL FILTER COLOR MODULE: 1,300X890X1,600M/M 3) DRYING OVEN -MAIN BODY DIMENSION: (W)1,360X(L)6,200X(H)1,500MM MATERIAL: STEEL PIPING ? VALVE 4)POWDER BOOTH -MAIN BODY DIMENSION: (W)3,600X(L)5,000X(H)4,400MM MATERIAL: ASSEMBLY TYPE PANEL FILTERING SYSTEM: BAG FILTER:610X610X4PX10SET CEILING FILTER 1,000X4,400X10TX3 ROW WASHING SYSTEM: 3,200X4,900X(H)500M/M STRAINER: 820X(H)500M/MX10EA WATER CURTAIN: 2400X4900M/M OVER FLOW TANK: 250X4,900X(H)350M/M WATER CIRCULATION: 5.5KW ILLUMINATION SYSTEM: 1000LUXX3SET EXHAUST: 550?X250MMAQ 5) DRYING OVEN -MAIN BODY DIMENSION: (W)2,400X(L)9,200X(H)1,500MM MATERIAL: STEEL HEAT MEDIUM: PIPING ? VALVE 6)POWDER BOOTH -MAIN BODY DIMENSION: (W)1,600X(L)3,200X(H)2,310MM MATERIAL: STS304, STEEL POWDER COLLECTION FAN ? MOTER: 4,500CFMX150MMAQX5.5KW AIR MANIFOLD REVERSE JET PULSE VALVE FINAL FILTER ILLUMINATION SYSTEM COLOR MODULE: 1,300X890X1,600M/M 7) DRYING OVEN -MAIN BODY DIMENSION: (W)2,400X(L)6,200X(H)1,500MM MATERIAL: STEEL HEATING MEDIUM: PIPING ? VALVE 8) PRELIMINARY DRYING OVEN -MAIN BODY DIMENSION: (W)1,350X(L)6,200X(H)1,500MM MATERIAL: STEEL HEATING MEDIUM: PIPING ? VALVE 9) CONVEYOR FLOW CONVEYOR: 15M CHAIN CONVEYOR: 4.4M FLOW CONVEYOR: 8.4M X2SET CHAIN CONVEYOR: 4.4M CHAIN CONVEYOR: 8.4M ROLLER CONVEYOR: 1M BELT CONVEYOR: 10.3M ROUND ROLLER CONVEYOR: 1.1M ROLLER CONVEYOR: 2.7M ROLLER CONVEYOR: 1M FLOW CONVEYOR: 20.4M CHAIN CONVEYOR: 4.4M FLOW CONVEYOR: 12.4M X2SET CHAIN CONVEYOR: 4.4M CHAIN CONVEYOR: 12.4M ROLLER CONVEYOR: 1M BELT CONVEYOR: 12.8M ROLLER CONVEYOR: 1M ROLLER CONVEYOR: 2.5M ROLLER CONVEYOR: 1M ROUND ROLLER CONVEYOR: 1.1M ROLLER CONVEYOR: 0.6M ROLLER CONVEYOR: 1M FLOW CONVEYOR: 15M CHAIN CONVEYOR: 4.4M FLOW CONVEYOR: 8.4M X2SET CHAIN CONVEYOR: 4.4M CHAIN CONVEYOR: 8.4M ROLLER CONVEYOR: 8.1M 10) CONTROL PANEL 11) BOILER(MIURA) MODEL: EZ-1500G CAP: 1,500KG/HR PRESSURE: 10KG/? BLOWER: 7.5KW 12) HEATING MEDIUM BOILER MODEL : SP-H80 CAP : 800,000KCAL/HR TEMP : 300?C PRESSURE : 10KG/? BURNER : RS-100 HEATING MEDIUM CIRCULATION PUMP : 11KWX2SET 13)A.H.U ? A/C TOWER (1)A.H.U 1SET 2,230X6,075MMX2,175(H) BURNER: 500,000KCAL/HR FAN: 450CMMX80MMAQX15KW (2)A/C TOWER CARBON TYPE(TURBO) 2,200X4,450X2,300MM(H) 500?X250MMAQX37KW W/DUCT 14) AIR COMPRESSOR SCREW TYPE MODEL: YES75-GLA CAP: 10.22?/MIN POWER: 75KW - AIR DRYER SMD-75 - AIR COOLER HI-4C - AIR TANK:2? - AIR FILTER - AIR DRYER: HL350K 15) WATER TREATMENT EQUIPMENT WATER TANK:2?(PE) ACTIVATED CARBON TANK:100? SOFTNER TANK:100? MICRO FILTER:?180X750M/M POLISHER UNIT:100?X2EA WATER STORAGE TANK:2?(PE) R/O UNIT:4”X40”X3EA PUMP 16) GAS SCRUBER (1)ACID SCRUBER ?1,700X(H)4,200M/M (2)EXHAUST BLOWER SYSTEM 150?X180MMAQX11KW (3)PIPING LINE STRUCTURE (4)CHEMICAL FEEDING SYSTEM (5)CONTROL PANEL B. IN LINE SPUTTER SYSTEM MAKE: INTERPARK(KOREA) MAKE YEAR: 2012 MODEL: IVA-186 3CHAMBER 4DOOR TYPE PRODUCT: AL WHEEL SIZE: MAX24.5”WHEEL TACT TIME: 3.2MIN/CARRIER (1) CHAMBER CH 1,3:900X960X510M/M CH 2:950X1,140X730M/M (2) PUMPING SYSTEM: ? BESTECH VP24K ? BESTECH BM12A ? BESTECH BT 85A ? SD-14Z DIFFUSING PUMP ? POLYCOLD SCP-750CH (3) CATHODE ? ELECTRO MAGNET CATHODE ? MAGNTRON CATHODE (4) DC POWER INTTECH 10KW, 5KWX3UNITS (5) AIR CY1. DOOR: 4EA (6) CONTROL SYSTEM, GAUGE (7) CHILLER: CTS-5001 11KW CTS-5001 7.5KW
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 2 kg<br/>dimensions (l x w x h) approx.: 250 x 200 x 100 mm<br/>description: composed of 2x strainer for density measurementg<br> 1x varnish coating thickness gauge<br> see photos WEIGHT APPROX.: 2 KG
DIMENSIONS (L X W X H) APPROX.: 250 X 200 X 100 MM
DESCRIPTION: COMPOSED OF 2X STRAINER FOR DENSITY MEASUREMENTG
1X VARNISH COATING THICKNESS GAUGE
SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-universal machining centre procedures
x 800 mm
y axis 630 mm
z axis 630 mm
b-axis 360,000 x 0.001 â°
--------------------------------------------
horizontal / vertical swivel head
round table 800 x 630 mm
spindle speed up to 12,000 1/min-
tool magazine 30-fach
toolholder sk 40 facilities:
-internal coolant 40 bar
-kss system 600 l with strainer
-bed flushing
-cabinet with heat exchanger
-bed flushing
-probe
-cnc controller heidenhain itnc 530
 UNIVERSAL MACHINING CENTRE PROCEDURES X 800 MM Y AXIS 630 MM Z AXIS 630 MM B-AXIS 360,000 X 0.001 &ACIRC;&DEG; -------------------------------------------- HORIZONTAL / VERTICAL SWIVEL HEAD ROUND TABLE 800 X 630 MM SPINDLE SPEED UP TO 12,000 1/MIN- TOOL MAGAZINE 30-FACH TOOLHOLDER SK 40 FACILITIES: -INTERNAL COOLANT 40 BAR -KSS SYSTEM 600 L WITH STRAINER -BED FLUSHING -CABINET WITH HEAT EXCHANGER -BED FLUSHING -PROBE -CNC CONTROLLER HEIDENHAIN ITNC 530
Vendedor: MSI Elmar Reith
Año de construcción: usado
Ubicación: Land-filter strainer/basket filter (1x), make hoefnagel & meijn, no 91410-01, design pressure 0,3 bar, new 1991, strainer perforation dia. 5mm, material stainless steel , vessel dia. 500x450mm, mounted on legs, extra specificationsmiscellaneous filtersmiscellaneous > miscellaneous filters FILTER STRAINER/BASKET FILTER (1X), MAKE HOEFNAGEL & MEIJN, NO 91410-01, DESIGN PRESSURE 0,3 BAR, NEW 1991, STRAINER PERFORATION DIA. 5MM, MATERIAL STAINLESS STEEL , VESSEL DIA. 500X450MM, MOUNTED ON LEGS, EXTRA SPECIFICATIONSMISCELLANEOUS FILTERSMISCELLANEOUS > MISCELLANEOUS FILTERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-shredder / double rotor crusher with low speed (very little in use!) capacity 100 m3/heingabeoeffnung 1820 x 2500 mmrotoren 2 st d = 630 mm (with interchangeable tool) rotation speed 30 rpmmotor 2 st. 90 kweingabetasche of the crusher is with hydraulic door (manual) and a bypass inclination. frequency converter 2 stueckraumaster two-shaft shredders are especially robust machines with a capacity up to 100 t/h. a homogeneous shredding material is produced by the interaction of the two rotors with the common counter knife and the strainer or optional sieve rust. the two-shaft shredders are built as a first or secondary shredder and are suitable for use in the field of wood as well as household and commercial waste. SHREDDER / DOUBLE ROTOR CRUSHER WITH LOW SPEED (VERY LITTLE IN USE!) CAPACITY 100 M3/HEINGABEOEFFNUNG 1820 X 2500 MMROTOREN 2 ST D = 630 MM (WITH INTERCHANGEABLE TOOL) ROTATION SPEED 30 RPMMOTOR 2 ST. 90 KWEINGABETASCHE OF THE CRUSHER IS WITH HYDRAULIC DOOR (MANUAL) AND A BYPASS INCLINATION. FREQUENCY CONVERTER 2 STUECKRAUMASTER TWO-SHAFT SHREDDERS ARE ESPECIALLY ROBUST MACHINES WITH A CAPACITY UP TO 100 T/H. A HOMOGENEOUS SHREDDING MATERIAL IS PRODUCED BY THE INTERACTION OF THE TWO ROTORS WITH THE COMMON COUNTER KNIFE AND THE STRAINER OR OPTIONAL SIEVE RUST. THE TWO-SHAFT SHREDDERS ARE BUILT AS A FIRST OR SECONDARY SHREDDER AND ARE SUITABLE FOR USE IN THE FIELD OF WOOD AS WELL AS HOUSEHOLD AND COMMERCIAL WASTE.
Vendedor: Heindl Handels GmbH
Año de construcción: usado
Ubicación: Land-grinding length: 700 mm<br/>grinding width: 450 mm<br/>workpiece height: 560 mm<br/>control: siemens 840 c <br/>grinding wheel diameter: 400 mm<br/>drive: 32 kw<br/>turning speeds: 1450 u/min<br/>total power requirement:  kw<br/>weight of the machine ca.: 8 t<br/>dimensions of the machine ca.: 4,0x2,4x2,4 m<br/>precision grinding machine for high-precision parts<br/><br/>dresser of table and head<br/>balance system (balancing)<br/>flanges<br/>balancing spindles<br/>trainer<br/><br/><br/><br/><br/><br/> GRINDING LENGTH: 700 MM
GRINDING WIDTH: 450 MM
WORKPIECE HEIGHT: 560 MM
CONTROL: SIEMENS 840 C
GRINDING WHEEL DIAMETER: 400 MM
DRIVE: 32 KW
TURNING SPEEDS: 1450 U/MIN
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 8 T
DIMENSIONS OF THE MACHINE CA.: 4,0X2,4X2,4 M
PRECISION GRINDING MACHINE FOR HIGH-PRECISION PARTS

DRESSER OF TABLE AND HEAD
BALANCE SYSTEM (BALANCING)
FLANGES
BALANCING SPINDLES
TRAINER





Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-automobile aluminum wheel coating equipment



make: incos(korea)

make year: 2012

size: ?650x300m/m

weight: 30kg

capacity: 16pcs/hr



a. coating line

1)pre-treatment equipment

hot water: (w)710x(l)1,500x(h)1,120mm

pre degrease: (w)710x(l)1,500x(h)1,120mm

degrease: (w)710x(l)1,500x(h)1,120mm

no 1,2 rinse: (w)710x(l)1,500x(h)1,120mm

deoxidation: (w)710x(l)1,500x(h)1,120mm

no 3,4 rinse: (w)710x(l)1,500x(h)1,120mm

cromate: (w)710x(l)1,500x(h)1,120mm

no 5,6 rinse: (w)710x(l)1,500x(h)1,120mm

d.i. rinse: (w)710x(l)1,500x(h)1,120mm

oven tank: (w)4,630x(l)1,500x(h)1,150mm

aluminum wheel transfer: 2sets

carrier type

2)powder booth

-main body dimension: (w)1,600x(l)3,200x(h)2,320mm

material: sts304, steel

powder collection fan ? moter: 4,500cfmx150mmaqx5.5kw

air manifold

reverse jet pulse valve

final filter

color module: 1,300x890x1,600m/m

3) drying oven

-main body dimension: (w)1,360x(l)6,200x(h)1,500mm

material: steel

piping ? valve

4)powder booth

-main body dimension: (w)3,600x(l)5,000x(h)4,400mm

material: assembly type panel

filtering system:

bag filter:610x610x4px10set

ceiling filter

1,000x4,400x10tx3 row

washing system: 3,200x4,900x(h)500m/m

strainer: 820x(h)500m/mx10ea

water curtain: 2400x4900m/m

over flow tank: 250x4,900x(h)350m/m

water circulation: 5.5kw

illumination system: 1000luxx3set

exhaust: 550?x250mmaq

5) drying oven

-main body dimension: (w)2,400x(l)9,200x(h)1,500mm

material: steel

heat medium: piping ? valve

6)powder booth

-main body dimension: (w)1,600x(l)3,200x(h)2,310mm

material: sts304, steel

powder collection fan ? moter: 4,500cfmx150mmaqx5.5kw

air manifold

reverse jet pulse valve

final filter

illumination system

color module: 1,300x890x1,600m/m

7) drying oven

-main body dimension: (w)2,400x(l)6,200x(h)1,500mm

material: steel

heating medium: piping ? valve

8) preliminary drying oven

-main body dimension: (w)1,350x(l)6,200x(h)1,500mm

material: steel

heating medium: piping ? valve

9) conveyor

flow conveyor: 15m

chain conveyor: 4.4m

flow conveyor: 8.4m x2set

chain conveyor: 4.4m

chain conveyor: 8.4m

roller conveyor: 1m

belt conveyor: 10.3m

round roller conveyor: 1.1m

roller conveyor: 2.7m

roller conveyor: 1m

flow conveyor: 20.4m

chain conveyor: 4.4m

flow conveyor: 12.4m x2set

chain conveyor: 4.4m

chain conveyor: 12.4m

roller conveyor: 1m

belt conveyor: 12.8m

roller conveyor: 1m

roller conveyor: 2.5m

roller conveyor: 1m

round roller conveyor: 1.1m

roller conveyor: 0.6m

roller conveyor: 1m

flow conveyor: 15m

chain conveyor: 4.4m

flow conveyor: 8.4m x2set

chain conveyor: 4.4m

chain conveyor: 8.4m

roller conveyor: 8.1m

10) control panel

11) boiler(miura)

model: ez-1500g

cap: 1,500kg/hr

pressure: 10kg/?

blower: 7.5kw

12) heating medium boiler

model : sp-h80

cap : 800,000kcal/hr

temp : 300?c

pressure : 10kg/?

burner : rs-100

heating medium circulation pump : 11kwx2set

13)a.h.u ? a/c tower

(1)a.h.u 1set

2,230x6,075mmx2,175(h)

burner: 500,000kcal/hr

fan: 450cmmx80mmaqx15kw

(2)a/c tower

carbon type(turbo)

2,200x4,450x2,300mm(h)

500?x250mmaqx37kw

w/duct

14) air compressor

screw type

model: yes75-gla

cap: 10.22?/min

power: 75kw

- air dryer smd-75

- air cooler hi-4c

- air tank:2?

- air filter

- air dryer: hl350k

15) water treatment equipment

water tank:2?(pe)

activated carbon tank:100?

softner tank:100?

micro filter:?180x750m/m

polisher unit:100?x2ea

water storage tank:2?(pe)

r/o unit:4”x40”x3ea

pump

16) gas scruber

(1)acid scruber

?1,700x(h)4,200m/m

(2)exhaust blower system

150?x180mmaqx11kw

(3)piping line structure

(4)chemical feeding system

(5)control panel



b. in line sputter system

make: interpark(korea)

make year: 2012

model: iva-186

3chamber 4door type

product: al wheel

size: max24.5”wheel

tact time: 3.2min/carrier

(1) chamber

ch 1,3:900x960x510m/m

ch 2:950x1,140x730m/m

(2) pumping system:

? bestech vp24k

? bestech bm12a

? bestech bt 85a

? sd-14z diffusing pump

? polycold scp-750ch

(3) cathode

? electro magnet cathode

? magntron cathode

(4) dc power
bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567    

 AUTOMOBILE ALUMINUM WHEEL COATING EQUIPMENT MAKE: INCOS(KOREA) MAKE YEAR: 2012 SIZE: ?650X300M/M WEIGHT: 30KG CAPACITY: 16PCS/HR A. COATING LINE 1)PRE-TREATMENT EQUIPMENT HOT WATER: (W)710X(L)1,500X(H)1,120MM PRE DEGREASE: (W)710X(L)1,500X(H)1,120MM DEGREASE: (W)710X(L)1,500X(H)1,120MM NO 1,2 RINSE: (W)710X(L)1,500X(H)1,120MM DEOXIDATION: (W)710X(L)1,500X(H)1,120MM NO 3,4 RINSE: (W)710X(L)1,500X(H)1,120MM CROMATE: (W)710X(L)1,500X(H)1,120MM NO 5,6 RINSE: (W)710X(L)1,500X(H)1,120MM D.I. RINSE: (W)710X(L)1,500X(H)1,120MM OVEN TANK: (W)4,630X(L)1,500X(H)1,150MM ALUMINUM WHEEL TRANSFER: 2SETS CARRIER TYPE 2)POWDER BOOTH -MAIN BODY DIMENSION: (W)1,600X(L)3,200X(H)2,320MM MATERIAL: STS304, STEEL POWDER COLLECTION FAN ? MOTER: 4,500CFMX150MMAQX5.5KW AIR MANIFOLD REVERSE JET PULSE VALVE FINAL FILTER COLOR MODULE: 1,300X890X1,600M/M 3) DRYING OVEN -MAIN BODY DIMENSION: (W)1,360X(L)6,200X(H)1,500MM MATERIAL: STEEL PIPING ? VALVE 4)POWDER BOOTH -MAIN BODY DIMENSION: (W)3,600X(L)5,000X(H)4,400MM MATERIAL: ASSEMBLY TYPE PANEL FILTERING SYSTEM: BAG FILTER:610X610X4PX10SET CEILING FILTER 1,000X4,400X10TX3 ROW WASHING SYSTEM: 3,200X4,900X(H)500M/M STRAINER: 820X(H)500M/MX10EA WATER CURTAIN: 2400X4900M/M OVER FLOW TANK: 250X4,900X(H)350M/M WATER CIRCULATION: 5.5KW ILLUMINATION SYSTEM: 1000LUXX3SET EXHAUST: 550?X250MMAQ 5) DRYING OVEN -MAIN BODY DIMENSION: (W)2,400X(L)9,200X(H)1,500MM MATERIAL: STEEL HEAT MEDIUM: PIPING ? VALVE 6)POWDER BOOTH -MAIN BODY DIMENSION: (W)1,600X(L)3,200X(H)2,310MM MATERIAL: STS304, STEEL POWDER COLLECTION FAN ? MOTER: 4,500CFMX150MMAQX5.5KW AIR MANIFOLD REVERSE JET PULSE VALVE FINAL FILTER ILLUMINATION SYSTEM COLOR MODULE: 1,300X890X1,600M/M 7) DRYING OVEN -MAIN BODY DIMENSION: (W)2,400X(L)6,200X(H)1,500MM MATERIAL: STEEL HEATING MEDIUM: PIPING ? VALVE 8) PRELIMINARY DRYING OVEN -MAIN BODY DIMENSION: (W)1,350X(L)6,200X(H)1,500MM MATERIAL: STEEL HEATING MEDIUM: PIPING ? VALVE 9) CONVEYOR FLOW CONVEYOR: 15M CHAIN CONVEYOR: 4.4M FLOW CONVEYOR: 8.4M X2SET CHAIN CONVEYOR: 4.4M CHAIN CONVEYOR: 8.4M ROLLER CONVEYOR: 1M BELT CONVEYOR: 10.3M ROUND ROLLER CONVEYOR: 1.1M ROLLER CONVEYOR: 2.7M ROLLER CONVEYOR: 1M FLOW CONVEYOR: 20.4M CHAIN CONVEYOR: 4.4M FLOW CONVEYOR: 12.4M X2SET CHAIN CONVEYOR: 4.4M CHAIN CONVEYOR: 12.4M ROLLER CONVEYOR: 1M BELT CONVEYOR: 12.8M ROLLER CONVEYOR: 1M ROLLER CONVEYOR: 2.5M ROLLER CONVEYOR: 1M ROUND ROLLER CONVEYOR: 1.1M ROLLER CONVEYOR: 0.6M ROLLER CONVEYOR: 1M FLOW CONVEYOR: 15M CHAIN CONVEYOR: 4.4M FLOW CONVEYOR: 8.4M X2SET CHAIN CONVEYOR: 4.4M CHAIN CONVEYOR: 8.4M ROLLER CONVEYOR: 8.1M 10) CONTROL PANEL 11) BOILER(MIURA) MODEL: EZ-1500G CAP: 1,500KG/HR PRESSURE: 10KG/? BLOWER: 7.5KW 12) HEATING MEDIUM BOILER MODEL : SP-H80 CAP : 800,000KCAL/HR TEMP : 300?C PRESSURE : 10KG/? BURNER : RS-100 HEATING MEDIUM CIRCULATION PUMP : 11KWX2SET 13)A.H.U ? A/C TOWER (1)A.H.U 1SET 2,230X6,075MMX2,175(H) BURNER: 500,000KCAL/HR FAN: 450CMMX80MMAQX15KW (2)A/C TOWER CARBON TYPE(TURBO) 2,200X4,450X2,300MM(H) 500?X250MMAQX37KW W/DUCT 14) AIR COMPRESSOR SCREW TYPE MODEL: YES75-GLA CAP: 10.22?/MIN POWER: 75KW - AIR DRYER SMD-75 - AIR COOLER HI-4C - AIR TANK:2? - AIR FILTER - AIR DRYER: HL350K 15) WATER TREATMENT EQUIPMENT WATER TANK:2?(PE) ACTIVATED CARBON TANK:100? SOFTNER TANK:100? MICRO FILTER:?180X750M/M POLISHER UNIT:100?X2EA WATER STORAGE TANK:2?(PE) R/O UNIT:4”X40”X3EA PUMP 16) GAS SCRUBER (1)ACID SCRUBER ?1,700X(H)4,200M/M (2)EXHAUST BLOWER SYSTEM 150?X180MMAQX11KW (3)PIPING LINE STRUCTURE (4)CHEMICAL FEEDING SYSTEM (5)CONTROL PANEL B. IN LINE SPUTTER SYSTEM MAKE: INTERPARK(KOREA) MAKE YEAR: 2012 MODEL: IVA-186 3CHAMBER 4DOOR TYPE PRODUCT: AL WHEEL SIZE: MAX24.5”WHEEL TACT TIME: 3.2MIN/CARRIER (1) CHAMBER CH 1,3:900X960X510M/M CH 2:950X1,140X730M/M (2) PUMPING SYSTEM: ? BESTECH VP24K ? BESTECH BM12A ? BESTECH BT 85A ? SD-14Z DIFFUSING PUMP ? POLYCOLD SCP-750CH (3) CATHODE ? ELECTRO MAGNET CATHODE ? MAGNTRON CATHODE (4) DC POWER BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-this listing is for a 2004 aquastream 2 air-cooled liquid chiller.

only a main power supply and water connections are necessary, the rest is in the “box”. the integrated hydraulic module features all necessary components:
• pump
• expansion tank 
• valves
• flow switch
• pressure gauge 
• relief valve
• strainer
THIS LISTING IS FOR A 2004 AQUASTREAM 2 AIR-COOLED LIQUID CHILLER. ONLY A MAIN POWER SUPPLY AND WATER CONNECTIONS ARE NECESSARY, THE REST IS IN THE “BOX”. THE INTEGRATED HYDRAULIC MODULE FEATURES ALL NECESSARY COMPONENTS: • PUMP • EXPANSION TANK • VALVES • FLOW SWITCH • PRESSURE GAUGE • RELIEF VALVE • STRAINER
Vendedor: PostIndustry
Año de construcción: usado
Ubicación: Land-refurbished press c38-600 (version in stainless steel)

wave with new grooves and grooves stones
newly stored (all bearings and shaft seals new)
revised hydraulic nut
revised 4-kant head
positive-drive
new koller
redesigned vertical shaft
new knife holder and knife
revised matrix seat
sandblasted and powder-coated
new oil system with oil pump, filters, flow meters, thermometers, strainers and lines
75-110kw motor on request including
worm shaft and worm wheel in very good condition
matrix can be offered separately. REFURBISHED PRESS C38-600 (VERSION IN STAINLESS STEEL) WAVE WITH NEW GROOVES AND GROOVES STONES NEWLY STORED (ALL BEARINGS AND SHAFT SEALS NEW) REVISED HYDRAULIC NUT REVISED 4-KANT HEAD POSITIVE-DRIVE NEW KOLLER REDESIGNED VERTICAL SHAFT NEW KNIFE HOLDER AND KNIFE REVISED MATRIX SEAT SANDBLASTED AND POWDER-COATED NEW OIL SYSTEM WITH OIL PUMP, FILTERS, FLOW METERS, THERMOMETERS, STRAINERS AND LINES 75-110KW MOTOR ON REQUEST INCLUDING WORM SHAFT AND WORM WHEEL IN VERY GOOD CONDITION MATRIX CAN BE OFFERED SEPARATELY.
Vendedor: Cortelia Systems GmbH
Año de construcción: usado
Ubicación: Land-this listing is for a 2004 aquastream 2 air-cooled liquid chiller.

only a main power supply and water connections are necessary, the rest is in the “box”. the integrated hydraulic module features all necessary components:
• pump
• expansion tank 
• valves
• flow switch
• pressure gauge 
• relief valve
• strainer
THIS LISTING IS FOR A 2004 AQUASTREAM 2 AIR-COOLED LIQUID CHILLER. ONLY A MAIN POWER SUPPLY AND WATER CONNECTIONS ARE NECESSARY, THE REST IS IN THE “BOX”. THE INTEGRATED HYDRAULIC MODULE FEATURES ALL NECESSARY COMPONENTS: • PUMP • EXPANSION TANK • VALVES • FLOW SWITCH • PRESSURE GAUGE • RELIEF VALVE • STRAINER
Vendedor: PostIndustry
Año de construcción: usado
Ubicación: Land-drum : 3 mm 
capacity up to ± 1000 kg / h
overall dimensions (l x w x h) : ± 1.350 x 1.1150 x 2.450 mm
3 kw
works also as a sieve / strainer
 DRUM : 3 MM CAPACITY UP TO ± 1000 KG / H OVERALL DIMENSIONS (L X W X H) : ± 1.350 X 1.1150 X 2.450 MM 3 KW WORKS ALSO AS A SIEVE / STRAINER
Vendedor: Barsso NV
Año de construcción: usado
Ubicación: Land-this listing is for a 2004 aquastream 2 air-cooled liquid chiller.

only a main power supply and water connections are necessary, the rest is in the “box”. the integrated hydraulic module features all necessary components:
• pump
• expansion tank 
• valves
• flow switch
• pressure gauge 
• relief valve
• strainer
THIS LISTING IS FOR A 2004 AQUASTREAM 2 AIR-COOLED LIQUID CHILLER. ONLY A MAIN POWER SUPPLY AND WATER CONNECTIONS ARE NECESSARY, THE REST IS IN THE “BOX”. THE INTEGRATED HYDRAULIC MODULE FEATURES ALL NECESSARY COMPONENTS: • PUMP • EXPANSION TANK • VALVES • FLOW SWITCH • PRESSURE GAUGE • RELIEF VALVE • STRAINER
Vendedor: PostIndustry
Año de construcción: usado
Precio: 363 €
Ubicación: Land- te koop:
staal 37 filterhuis.
pre filtration strainer model 10208
max 8 bar inlaat en uitlaat.
doorsnee flensaansluiting 80mm.
rvs zeef doorsnee hoogte 260mm 150mm.
maaswijdte zeef 3mm.
hoogte of totaal 350 mm. TE KOOP: STAAL 37 FILTERHUIS. PRE FILTRATION STRAINER MODEL 10208 MAX 8 BAR INLAAT EN UITLAAT. DOORSNEE FLENSAANSLUITING 80MM. RVS ZEEF DOORSNEE HOOGTE 260MM 150MM. MAASWIJDTE ZEEF 3MM. HOOGTE OF TOTAAL 350 MM.
Vendedor: Herr Wim Derikx
Año de construcción: usado
Ubicación: Land-<br>pressure: 30 t<br>sheet length: 2500 mm<br>sheet width: 1250 mm<br>positions atc: 0  <br>cnc brand: siemens<br>cnc model: 840 d <br><p>make rainer oc 3 </p>
<p>type oc 3000</p>
<p>year 2001</p>
<p>siemens 840 d !pressure (metric ton) 30 ton = 6 mm</p>
<p>sheet length (mm) x = 2.500</p>
<p>sheet width (mm)y = 1.250</p>
<p>pos atc revolver = 20 pos</p>
<p>brush table over taking under power !-	7 x a station -	5 x b station -	2 x c station -	6 x d station ( 1 x multi tool 6 x a)</p>
<p>
PRESSURE: 30 T
SHEET LENGTH: 2500 MM
SHEET WIDTH: 1250 MM
POSITIONS ATC: 0  
CNC BRAND: SIEMENS
CNC MODEL: 840 D

MAKE RAINER OC 3

TYPE OC 3000

YEAR 2001

SIEMENS 840 D !PRESSURE (METRIC TON) 30 TON = 6 MM

SHEET LENGTH (MM) X = 2.500

SHEET WIDTH (MM)Y = 1.250

POS ATC REVOLVER = 20 POS

BRUSH TABLE OVER TAKING UNDER POWER !- 7 X A STATION - 5 X B STATION - 2 X C STATION - 6 X D STATION ( 1 X MULTI TOOL 6 X A)

Vendedor: Mach4metal
Año de construcción: usado
Precio: 8.500 €
Ubicación: Land-cutting mill cmb ms 46 (plastic recycling)
 number of rotors 1
 grinding chamber 460 x 600 mm
 knife fixed rotating 2 x 2, 3 x 2
 rotor diameter 㸠320 mm
 rotor length 590 mm
 motor power 30 kw 1400 rpm, 380 v, 50 hz
 600 x 250 mm inlet strainer holes ã? 10 mm (exchange)
 gear motors of 2 x 1 kw 2 powered cylinder
 suction opening 㸠85 mm
 grinding capacity: 300-700 kg / h
 length/width/height 3000/1630/1600 mm
 fan
 approx. weight kg 2000 reconditioned  CUTTING MILL CMB MS 46 (PLASTIC RECYCLING) NUMBER OF ROTORS 1 GRINDING CHAMBER 460 X 600 MM KNIFE FIXED ROTATING 2 X 2, 3 X 2 ROTOR DIAMETER &ATILDE;&CEDIL; 320 MM ROTOR LENGTH 590 MM MOTOR POWER 30 KW 1400 RPM, 380 V, 50 HZ 600 X 250 MM INLET STRAINER HOLES &ATILDE;? 10 MM (EXCHANGE) GEAR MOTORS OF 2 X 1 KW 2 POWERED CYLINDER SUCTION OPENING &ATILDE;&CEDIL; 85 MM GRINDING CAPACITY: 300-700 KG / H LENGTH/WIDTH/HEIGHT 3000/1630/1600 MM FAN APPROX. WEIGHT KG 2000 RECONDITIONED
Vendedor: Dematech s.r.o
Año de construcción: usado
Ubicación: Land-make: thibaut
model: 108 a v4
condition: used
machine type: other 
condition info: excellent working condition parts recently refurbished

machine details
this machine is in excellent working condition and has recently undergone some refurbishment works, which include:

siemens simodrive refurbished 
vacuum motor refurbished 
norgren solenoid valves replaced
the machine has been well maintained and comes complete with the following tooling included in the sale:

15 x cnc tool holder cones to accommodate

35mm thin wall core bit
full set 20mm ogee tools
edge polishing drums
router cutting tool
drainer groove tools
view a second video of the machine routing an under sink mount cut out operation  MAKE: THIBAUT MODEL: 108 A V4 CONDITION: USED MACHINE TYPE: OTHER CONDITION INFO: EXCELLENT WORKING CONDITION PARTS RECENTLY REFURBISHED MACHINE DETAILS THIS MACHINE IS IN EXCELLENT WORKING CONDITION AND HAS RECENTLY UNDERGONE SOME REFURBISHMENT WORKS, WHICH INCLUDE: SIEMENS SIMODRIVE REFURBISHED VACUUM MOTOR REFURBISHED NORGREN SOLENOID VALVES REPLACED THE MACHINE HAS BEEN WELL MAINTAINED AND COMES COMPLETE WITH THE FOLLOWING TOOLING INCLUDED IN THE SALE: 15 X CNC TOOL HOLDER CONES TO ACCOMMODATE 35MM THIN WALL CORE BIT FULL SET 20MM OGEE TOOLS EDGE POLISHING DRUMS ROUTER CUTTING TOOL DRAINER GROOVE TOOLS VIEW A SECOND VIDEO OF THE MACHINE ROUTING AN UNDER SINK MOUNT CUT OUT OPERATION
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land-baling press

manuf.: strautmann, 
type: bale trainer, 
y.o.c.: 2009,

technical details: 400 v, 50 hz, 32 kw,
press power : 600 kn, press stroke: 750 mm, filling opening: 1250 mm
bale weight: max. 400 kg, bale size in the chamber (lxwxh): 1100 x 1100 x800 mm, bale tying: strapping with four wires
weight of machine: 6750 kg
consisting of:
conveyor feeding, eeding chute, feed-in roller, bale chamber, setting unit,
bale slide BALING PRESS MANUF.: STRAUTMANN, TYPE: BALE TRAINER, Y.O.C.: 2009, TECHNICAL DETAILS: 400 V, 50 HZ, 32 KW, PRESS POWER : 600 KN, PRESS STROKE: 750 MM, FILLING OPENING: 1250 MM BALE WEIGHT: MAX. 400 KG, BALE SIZE IN THE CHAMBER (LXWXH): 1100 X 1100 X800 MM, BALE TYING: STRAPPING WITH FOUR WIRES WEIGHT OF MACHINE: 6750 KG CONSISTING OF: CONVEYOR FEEDING, EEDING CHUTE, FEED-IN ROLLER, BALE CHAMBER, SETTING UNIT, BALE SLIDE
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-repacking system for pet bottles, 
decrate of sixpacks and packing the bottles in crates,

capacity: 3.588 sixpacks/h (6 x 12,5 l pet-bottles), 
manufacturer: divers


consisting of:
palletizing: manufacturer: i.h.s.d.o.o, year: 2006, type: palau pack 2/gs - 2 l
pet ejectors: manufacturer: i.h.s.d.o.o, year: 2006, type: mman 1a
bale press: manufacturer: strautmann, year of build: 2009, type: bale trainer
crate washer: manufacturer: boos, year of build: 2006 type: krk 2-5/3-b-hd
full pack depalletizer: manufacturer: könig
pet-crater: manufacturer: könig/recop
crate and sixpacks conveyor

more equipment details on request  REPACKING SYSTEM FOR PET BOTTLES, DECRATE OF SIXPACKS AND PACKING THE BOTTLES IN CRATES, CAPACITY: 3.588 SIXPACKS/H (6 X 12,5 L PET-BOTTLES), MANUFACTURER: DIVERS CONSISTING OF: PALLETIZING: MANUFACTURER: I.H.S.D.O.O, YEAR: 2006, TYPE: PALAU PACK 2/GS - 2 L PET EJECTORS: MANUFACTURER: I.H.S.D.O.O, YEAR: 2006, TYPE: MMAN 1A BALE PRESS: MANUFACTURER: STRAUTMANN, YEAR OF BUILD: 2009, TYPE: BALE TRAINER CRATE WASHER: MANUFACTURER: BOOS, YEAR OF BUILD: 2006 TYPE: KRK 2-5/3-B-HD FULL PACK DEPALLETIZER: MANUFACTURER: KöNIG PET-CRATER: MANUFACTURER: KöNIG/RECOP CRATE AND SIXPACKS CONVEYOR MORE EQUIPMENT DETAILS ON REQUEST
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-repacking system for pet bottles by six-pack in bottle crates

manufacturer: diverse, 
capacity: 3.588 six-pack/h (6 x 1.5 pet bottles)

consisting of:
palletisation: manufacturer: i.h.s.d.o.o, year: 2006, type: palpack 2/gs - 2 l
pet ejectors: manufacturer: i.h.s.d.o.o, year: 2006, type: mman 1a
baler: manufacturer: strautmann, year of build: 2009, type: bale trainer
crate washer: manufacturer: boos, year of build: 2006 type: krk 2-5/3-b-hd
full pack depalletizer: manufacturer: könig
pet-a packer: manufacturer: kkönig/recop
crate and sixpack conveyors  REPACKING SYSTEM FOR PET BOTTLES BY SIX-PACK IN BOTTLE CRATES MANUFACTURER: DIVERSE, CAPACITY: 3.588 SIX-PACK/H (6 X 1.5 PET BOTTLES) CONSISTING OF: PALLETISATION: MANUFACTURER: I.H.S.D.O.O, YEAR: 2006, TYPE: PALPACK 2/GS - 2 L PET EJECTORS: MANUFACTURER: I.H.S.D.O.O, YEAR: 2006, TYPE: MMAN 1A BALER: MANUFACTURER: STRAUTMANN, YEAR OF BUILD: 2009, TYPE: BALE TRAINER CRATE WASHER: MANUFACTURER: BOOS, YEAR OF BUILD: 2006 TYPE: KRK 2-5/3-B-HD FULL PACK DEPALLETIZER: MANUFACTURER: KöNIG PET-A PACKER: MANUFACTURER: KKöNIG/RECOP CRATE AND SIXPACK CONVEYORS
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-similar to azo e 650,.
mild steel, drive: 2,2 kw, strainer basket: d = 200 mm, l =.700 mm,.
without cover,.
enema: d = 150 mm, spout: d = 150 mm, oversize spout: d = 120 mm
dimensions including frame:!. 550 x 500 x 1,300 mm (l x w x h)
 SIMILAR TO AZO E 650,. MILD STEEL, DRIVE: 2,2 KW, STRAINER BASKET: D = 200 MM, L =.700 MM,. WITHOUT COVER,. ENEMA: D = 150 MM, SPOUT: D = 150 MM, OVERSIZE SPOUT: D = 120 MM DIMENSIONS INCLUDING FRAME:!. 550 X 500 X 1,300 MM (L X W X H)
Vendedor: SEMCO
Año de construcción: usado
Precio: 40 €
Ubicación: Land-strainer dn 50 steel
price / piece STRAINER DN 50 STEEL PRICE / PIECE
Vendedor: Herr Stefan Aniol
Año de construcción: usado
Ubicación: Land-strainers va dn 32   STRAINERS VA DN 32
Vendedor: Herr Stefan Aniol
Año de construcción: usado
Precio: 40 €
Ubicación: Land-strainer stainless steel dn 50 STRAINER STAINLESS STEEL DN 50
Vendedor: Herr Stefan Aniol
Año de construcción: usado
Ubicación: Land-extruder as a single machine for plastification and mixing of pvc as a calendar feed, including accessories such as conveyor belt, metal separators, etc.
comprehensive modernisation 1995

technical data
screw diameter:      250 mm
ratio l/d:            6d
drive capacity:       65 kw
capacity, max.     1.600 kg/h      EXTRUDER AS A SINGLE MACHINE FOR PLASTIFICATION AND MIXING OF PVC AS A CALENDAR FEED, INCLUDING ACCESSORIES SUCH AS CONVEYOR BELT, METAL SEPARATORS, ETC. COMPREHENSIVE MODERNISATION 1995 TECHNICAL DATA SCREW DIAMETER: 250 MM RATIO L/D: 6D DRIVE CAPACITY: 65 KW CAPACITY, MAX. 1.600 KG/H
Vendedor: plast consult Ing.-Ges. mbH
Año de construcción: usado
Ubicación: Land-extruder as single machine for plastification and mixing of pvc for calender-feeding, incl. accessories like transport beld, metall detector, etc., genearal modernisation in 1995

technical data
screw diameter:     250 mm
ratio l/d:           6d
drive capacity:      65 kw
capacity, max.    1.600 kg/h 
    EXTRUDER AS SINGLE MACHINE FOR PLASTIFICATION AND MIXING OF PVC FOR CALENDER-FEEDING, INCL. ACCESSORIES LIKE TRANSPORT BELD, METALL DETECTOR, ETC., GENEARAL MODERNISATION IN 1995 TECHNICAL DATA SCREW DIAMETER: 250 MM RATIO L/D: 6D DRIVE CAPACITY: 65 KW CAPACITY, MAX. 1.600 KG/H
Vendedor: plast consult Ing.-Ges. mbH
Año de construcción: usado
Ubicación: Land-similar to azo e 650,.
mild steel, drive: 2,2 kw, strainer basket: d = 200 mm, l =.700 mm,.
without cover,.
enema: d = 150 mm, spout: d = 150 mm, oversize spout: d = 120 mm
dimensions including frame:!. 550 x 500 x 1,300 mm (l x w x h)

 SIMILAR TO AZO E 650,. MILD STEEL, DRIVE: 2,2 KW, STRAINER BASKET: D = 200 MM, L =.700 MM,. WITHOUT COVER,. ENEMA: D = 150 MM, SPOUT: D = 150 MM, OVERSIZE SPOUT: D = 120 MM DIMENSIONS INCLUDING FRAME:!. 550 X 500 X 1,300 MM (L X W X H)
Vendedor: SEMCO
Año de construcción: usado
Ubicación: Land-calender feed (pvc-plastifierungs line)

year of construction: 1965/95/98
electr. services::
heating mixer: 80 kw
banbury mixer: 250 kw
rolling mill: 90 kw
strainer: 65 kw

consisting of the following main components: heating / cooling mixer combination, banbury mixer (guix 75 l), roller-mill (1,800 x 600 mm), strainer (ke 250 x 6 d), different conveyor belts with metal-detector (single components available by appointment).

pvc lamination.

  CALENDER FEED (PVC-PLASTIFIERUNGS LINE) YEAR OF CONSTRUCTION: 1965/95/98 ELECTR. SERVICES:: HEATING MIXER: 80 KW BANBURY MIXER: 250 KW ROLLING MILL: 90 KW STRAINER: 65 KW CONSISTING OF THE FOLLOWING MAIN COMPONENTS: HEATING / COOLING MIXER COMBINATION, BANBURY MIXER (GUIX 75 L), ROLLER-MILL (1,800 X 600 MM), STRAINER (KE 250 X 6 D), DIFFERENT CONVEYOR BELTS WITH METAL-DETECTOR (SINGLE COMPONENTS AVAILABLE BY APPOINTMENT). PVC LAMINATION.
Vendedor: plast consult Ing.-Ges. mbH
Año de construcción: usado
Precio: 10.000 €
Ubicación: Land-complete thermal oil plant consisting of the following components:
-thermoölerhitzer 900 kw, horizontal design, delta-t: 40 k
-safety equipment
-gas burner oertli with gas control line
-control cabinet, internally fully wired
-circulation pump with shut-off valves, strainers, etc
-expansion vessel 1'200 ltr. vertical
-bucket 3'000 ltr. vertical, with hand pump  COMPLETE THERMAL OIL PLANT CONSISTING OF THE FOLLOWING COMPONENTS: -THERMOöLERHITZER 900 KW, HORIZONTAL DESIGN, DELTA-T: 40 K -SAFETY EQUIPMENT -GAS BURNER OERTLI WITH GAS CONTROL LINE -CONTROL CABINET, INTERNALLY FULLY WIRED -CIRCULATION PUMP WITH SHUT-OFF VALVES, STRAINERS, ETC -EXPANSION VESSEL 1'200 LTR. VERTICAL -BUCKET 3'000 LTR. VERTICAL, WITH HAND PUMP
Vendedor: GTS Engineering
Año de construcción: usado
Ubicación: Land-we have for sale a complete antifouling system iccp from cathelco.
the system was taken out in good working condition.
available components:
main board
strainers with flanges (can be taken out on request)
3 anodes (copper)
1 anode  (aluminium)

for detailed information and price please contact us. WE HAVE FOR SALE A COMPLETE ANTIFOULING SYSTEM ICCP FROM CATHELCO. THE SYSTEM WAS TAKEN OUT IN GOOD WORKING CONDITION. AVAILABLE COMPONENTS: MAIN BOARD STRAINERS WITH FLANGES (CAN BE TAKEN OUT ON REQUEST) 3 ANODES (COPPER) 1 ANODE (ALUMINIUM) FOR DETAILED INFORMATION AND PRICE PLEASE CONTACT US.
Vendedor: Smedegaarden AS
Año de construcción: usado
Ubicación: Land-rotor diameter 1300 mm, engine 160 kw, with spare rotor. ROTOR DIAMETER 1300 MM, ENGINE 160 KW, WITH SPARE ROTOR.
Vendedor: Tila GmbH
Año de construcción: usado
Ubicación: Land-paper sorting system consisting of a feed hopper with transfer tape heavy duty z-shape, with cross band length 6 m working width 1, 10 m, as well as paper disc sieve bras.
the screening is carried out by means of rubber washers on 2 decks. screen opening 19 x 27 cm. drive by 2 x 4 kw electric geared motors, controllable frequency converter.
dimensions of the screen:
dimensions:
about 7,085 x 2,590 x 2,720 mm (length x width x height max.) 
internal width (strainer) 1,728 mm paper sorting system consisting of feed hopper with walkways band heavy type z-shape, with cross band 6 m working width of 1.10 m, and paper disc sieve bras. 
the screening takes place by means of rubber washers on two decks. sieve opening 19 x 27cm. driven by 2 x 4 kw of electric gear motor, controlled by frequency converters. 
dimensions of the screen: dimensions: approximately 7,085 x 2,590 x 2,720 mm (length x width x height max.) 
internal width (screen) 1,728 mm

contact at: rerec@web.de
or mobile: 0049 160 96232593
 PAPER SORTING SYSTEM CONSISTING OF A FEED HOPPER WITH TRANSFER TAPE HEAVY DUTY Z-SHAPE, WITH CROSS BAND LENGTH 6 M WORKING WIDTH 1, 10 M, AS WELL AS PAPER DISC SIEVE BRAS. THE SCREENING IS CARRIED OUT BY MEANS OF RUBBER WASHERS ON 2 DECKS. SCREEN OPENING 19 X 27 CM. DRIVE BY 2 X 4 KW ELECTRIC GEARED MOTORS, CONTROLLABLE FREQUENCY CONVERTER. DIMENSIONS OF THE SCREEN: DIMENSIONS: ABOUT 7,085 X 2,590 X 2,720 MM (LENGTH X WIDTH X HEIGHT MAX.) INTERNAL WIDTH (STRAINER) 1,728 MM PAPER SORTING SYSTEM CONSISTING OF FEED HOPPER WITH WALKWAYS BAND HEAVY TYPE Z-SHAPE, WITH CROSS BAND 6 M WORKING WIDTH OF 1.10 M, AND PAPER DISC SIEVE BRAS. THE SCREENING TAKES PLACE BY MEANS OF RUBBER WASHERS ON TWO DECKS. SIEVE OPENING 19 X 27CM. DRIVEN BY 2 X 4 KW OF ELECTRIC GEAR MOTOR, CONTROLLED BY FREQUENCY CONVERTERS. DIMENSIONS OF THE SCREEN: DIMENSIONS: APPROXIMATELY 7,085 X 2,590 X 2,720 MM (LENGTH X WIDTH X HEIGHT MAX.) INTERNAL WIDTH (SCREEN) 1,728 MM CONTACT AT: REREC@WEB.DE OR MOBILE: 0049 160 96232593
Vendedor: Reinhard
Año de construcción: usado
Ubicación: Land-machine with vibrator ntk 25 al (compressed air ready for connection).
2 groups, 2 outlets with d = 100 mm, strainer holes d = 3 mm
screen surface: 250 x 1,500 mm, system made of stainless steel

MACHINE WITH VIBRATOR NTK 25 AL (COMPRESSED AIR READY FOR CONNECTION). 2 GROUPS, 2 OUTLETS WITH D = 100 MM, STRAINER HOLES D = 3 MM SCREEN SURFACE: 250 X 1,500 MM, SYSTEM MADE OF STAINLESS STEEL
Vendedor: SEMCO
Año de construcción: usado
Ubicación: Land-capacity 4,0 kw
speed 1.435 rpm
inlet 50 mm
outlet 50 mm
vacuum pump incl. strainer and valve
 CAPACITY 4,0 KW SPEED 1.435 RPM INLET 50 MM OUTLET 50 MM VACUUM PUMP INCL. STRAINER AND VALVE
Vendedor: GS-INDUSTRIESERVICE
Año de construcción: usado
Precio: 15.390 €
Ubicación: Land-double-entstein / passiermaschine mk 2000 (includes 2 strainers) suitable to the stoning and passing of stone fruit and fruit, as well as various berries.
stone/core is separated cleanly from the fruit flesh, ready, fast screen changing, very low maintenance advantages: two steps in one - 1st step: stoning/core
-2nd step: passing

various screens can be placed in the

motor: 11 kw
capacity: 2000-4000 kg / h (depending on the type of fruit and whether patrol)
weight: 650 kg
material: stainless steel        DOUBLE-ENTSTEIN / PASSIERMASCHINE MK 2000 (INCLUDES 2 STRAINERS) SUITABLE TO THE STONING AND PASSING OF STONE FRUIT AND FRUIT, AS WELL AS VARIOUS BERRIES. STONE/CORE IS SEPARATED CLEANLY FROM THE FRUIT FLESH, READY, FAST SCREEN CHANGING, VERY LOW MAINTENANCE ADVANTAGES: TWO STEPS IN ONE - 1ST STEP: STONING/CORE -2ND STEP: PASSING VARIOUS SCREENS CAN BE PLACED IN THE MOTOR: 11 KW CAPACITY: 2000-4000 KG / H (DEPENDING ON THE TYPE OF FRUIT AND WHETHER PATROL) WEIGHT: 650 KG MATERIAL: STAINLESS STEEL
Vendedor: Maurer Gép KFT
Año de construcción: usado
Ubicación: Land--stanzmaschine rainer 2026w
working area 1000 x 1000
designation function in x direction with clamps
-26 tool stations of 3 rotating
-20to punching performance
tool system amada
model 1991 -STANZMASCHINE RAINER 2026W WORKING AREA 1000 X 1000 DESIGNATION FUNCTION IN X DIRECTION WITH CLAMPS -26 TOOL STATIONS OF 3 ROTATING -20TO PUNCHING PERFORMANCE TOOL SYSTEM AMADA MODEL 1991
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-strainer, 2 deck

cfbk vorsieb 2 floors.
weight: ca 9 ton
 STRAINER, 2 DECK CFBK VORSIEB 2 FLOORS. WEIGHT: CA 9 TON
Vendedor: Machinehandel DGW Hensen
Año de construcción: usado
Ubicación: Land-offer:
cast iron breaker atm gbp 120/400
 	
manufacturer:
atm
 	
type:
gbp 120/400
 	
year of construction:
2005
 	
machine condition:
ready for use
 	
offertype:
used machine offer	 	 	 
 	
technical data:
company	atm 
type gbp 120/400 
year 2005 
force breakcylinder to 120-400 
capacity kg/h 3.500-6.000 
driving power kw 22 
arrangement surface m 5,3 x 3,5 x 2,9 
place germany 
price ready for use, fca location on request 
available september 2015
plc bernecker & rainer OFFER: CAST IRON BREAKER ATM GBP 120/400 MANUFACTURER: ATM TYPE: GBP 120/400 YEAR OF CONSTRUCTION: 2005 MACHINE CONDITION: READY FOR USE OFFERTYPE: USED MACHINE OFFER TECHNICAL DATA: COMPANY ATM TYPE GBP 120/400 YEAR 2005 FORCE BREAKCYLINDER TO 120-400 CAPACITY KG/H 3.500-6.000 DRIVING POWER KW 22 ARRANGEMENT SURFACE M 5,3 X 3,5 X 2,9 PLACE GERMANY PRICE READY FOR USE, FCA LOCATION ON REQUEST AVAILABLE SEPTEMBER 2015 PLC BERNECKER & RAINER
Vendedor: ATM Recyclingsystems GmbH
Año de construcción: usado
Precio: 106.000 €
Ubicación: Land-technical data:
fruit wash, grind, pressing then the juice pasteurization and bag-in-box packaging pour performance up to 750 l/h incl. mounted hydraulic large box emptying wash grinding plant kreuzmayr kwem 1000 cover press kreuzmayr keb 500 pasteur kreuzmayr pa 750 oil bag-in-box fillers kreuzmayr cbf 900, incl. 6-digit series bottling juice pump, strainer, 2 pcs. juice buffer tank 220 litre stainless steel base frame, tandem chassis with tyres 195/50-10 plan building with gas spring lift for the two side walls, roll-over tarp back 4 pcs. crank rotating supports for the horizontal alignment of the system cleaner, air compressor and complete piping fix established
 
  
 TECHNICAL DATA: FRUIT WASH, GRIND, PRESSING THEN THE JUICE PASTEURIZATION AND BAG-IN-BOX PACKAGING POUR PERFORMANCE UP TO 750 L/H INCL. MOUNTED HYDRAULIC LARGE BOX EMPTYING WASH GRINDING PLANT KREUZMAYR KWEM 1000 COVER PRESS KREUZMAYR KEB 500 PASTEUR KREUZMAYR PA 750 OIL BAG-IN-BOX FILLERS KREUZMAYR CBF 900, INCL. 6-DIGIT SERIES BOTTLING JUICE PUMP, STRAINER, 2 PCS. JUICE BUFFER TANK 220 LITRE STAINLESS STEEL BASE FRAME, TANDEM CHASSIS WITH TYRES 195/50-10 PLAN BUILDING WITH GAS SPRING LIFT FOR THE TWO SIDE WALLS, ROLL-OVER TARP BACK 4 PCS. CRANK ROTATING SUPPORTS FOR THE HORIZONTAL ALIGNMENT OF THE SYSTEM CLEANER, AIR COMPRESSOR AND COMPLETE PIPING FIX ESTABLISHED
Vendedor: Kreuzmayr Maschinenbau GmbH
Año de construcción: usado
Precio: 80 €
Ubicación: Land-cat.-nr. 13-0136

in a very good condition

weight/unit:
appr. 2,0 kg

all prices are valid ex-works, excl.vat
freight charges: depending on dimensions and destination
delivery: from d-97753 karlstadt-karlburg
subject to prior sale CAT.-NR. 13-0136 IN A VERY GOOD CONDITION WEIGHT/UNIT: APPR. 2,0 KG ALL PRICES ARE VALID EX-WORKS, EXCL.VAT FREIGHT CHARGES: DEPENDING ON DIMENSIONS AND DESTINATION DELIVERY: FROM D-97753 KARLSTADT-KARLBURG SUBJECT TO PRIOR SALE
Vendedor: Eurolux GmbH & Co.KG
Año de construcción: usado
Precio: 77.650 €
Ubicación: Land-cat.-nr. 11-3205

new 

brew house with 10 hl volume per brewery process
complete
2 brews / day = 20 hl

basic equipment
the brew house is complete with all equipment. all equipment are with high standard an very simple to
use. this 10 hl brew house is built as 2 devices-brew house manual version with manual butterfly valve. it
is possible to make 2 brews/day (20 hl)
technology
all the pipes can be cleaned and sterilized in the circuit over the pump included.
a) in the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless
steel from mash boiler to the lauter tun.
b) after the lauter wort will be pumped back to the mash boiler.
c) after emptying the lauter tun the grit floor will be removed. the lauter tun will be changed to a whirlpool.
d) after cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used
as a whirlpool.
mashing tun / wort boiler
volume brutto: 1200 liter
volume net: 1000 liter
heating system: gas burner propan
insulating: 60 mm
material: stainless steel (aisi 304 - 1.4301)
mashing tun mounted on the frame with 3 stainless steel feet. on the top of mashing tun are cylinder conic
cap, which is able to open (manhole) for working.
also on the top are connection for agitator, water, and cleaning over one spray ball. the temperature
sensors pt100 are on the site on mashing tun for the temperature control.
lauter tun / whirlpool
volume brutto: 1200 liter
volume net: 1000 liter
bottom: strainer for wort
insulating: 60 mm
material: 1.4301
lauter tun mounted also on the frame with 3 stainless steel feet. on the top of tube are cylinder conic cap,
which is able to open for working (also with manhole). on the site are existing loop hole for to drain brewers
grains (draff).

the brew house will be completely installed before delivery for works inspection. all connections/fittings for
water pipe, gas and electrical, exhaust vapour, chimney and waste discharge must be done by the client in
order to start the production.
brew house
wort / brew 10 hl
malt / brew approx.190 kg necessary per batch
mashing tun insulated also used as wort boiler:
1 x mashing tube 1200 liter insulated brutto with frame and feet.
1 x agitator 60 rev/min
1 x spray ball with ball valve
1 x temperature sensor pt 100 for control of the temperature in the mash tun
1 x manhole dn 400
1 x gas burner
lauter tun / whirlpool:
1 x lauter tun 1200 liter brutto with frame and feet
1 x centrifugal pump made of stainless steel with cover and feet
1 x manhole dn 400
1 x loophole 440 x 332 for to drain brewers grains
1 x spray ball with ball valve
1 x agitator with 3 rev/min to hack brewers grains
1 x grit floor in stainless steel
1 x control system manual (without mash automatic)
1 x set of butterfly valves in dn 25 and all piping for mash and wort
1 x plate heat exchanger wort / cold water
with this heat exchanger you can cool down the wort from 98�c to approx. 15�c

training of brewery operators (upon request)
commissioning and instructions (upon request)
delivery: ex-works, d-97753 karlstadt
prices: net, excl.vat
packaging: safety packing for transport
delivery time: 4 � 6 weeks after order confirmation
delivery conditions: 50% in advance by order against bank guarantee from eurolux bank
50% in advance before delivery and control
necessary space for mash and lauter tun: lxwxh: 3,10 x 2,10 x 2,80 m
necessary space for tanks: lxwxh: 6,00 x 5,00 x 2,50 m CAT.-NR. 11-3205 NEW BREW HOUSE WITH 10 HL VOLUME PER BREWERY PROCESS COMPLETE 2 BREWS / DAY = 20 HL BASIC EQUIPMENT THE BREW HOUSE IS COMPLETE WITH ALL EQUIPMENT. ALL EQUIPMENT ARE WITH HIGH STANDARD AN VERY SIMPLE TO USE. THIS 10 HL BREW HOUSE IS BUILT AS 2 DEVICES-BREW HOUSE MANUAL VERSION WITH MANUAL BUTTERFLY VALVE. IT IS POSSIBLE TO MAKE 2 BREWS/DAY (20 HL) TECHNOLOGY ALL THE PIPES CAN BE CLEANED AND STERILIZED IN THE CIRCUIT OVER THE PUMP INCLUDED. A) IN THE MASH BOILER THE MASH WILL BE COOKED, THEN IT WILL BE PUMPED WITH ONE BEER PUMP MADE OF STAINLESS STEEL FROM MASH BOILER TO THE LAUTER TUN. B) AFTER THE LAUTER WORT WILL BE PUMPED BACK TO THE MASH BOILER. C) AFTER EMPTYING THE LAUTER TUN THE GRIT FLOOR WILL BE REMOVED. THE LAUTER TUN WILL BE CHANGED TO A WHIRLPOOL. D) AFTER COOKING THE HOPS A SPECIAL INJECTION VALVE IS INTRODUCED INSIDE THE LAUTER TUN SO THAT IT CAN BE USED AS A WHIRLPOOL. MASHING TUN / WORT BOILER VOLUME BRUTTO: 1200 LITER VOLUME NET: 1000 LITER HEATING SYSTEM: GAS BURNER PROPAN INSULATING: 60 MM MATERIAL: STAINLESS STEEL (AISI 304 - 1.4301) MASHING TUN MOUNTED ON THE FRAME WITH 3 STAINLESS STEEL FEET. ON THE TOP OF MASHING TUN ARE CYLINDER CONIC CAP, WHICH IS ABLE TO OPEN (MANHOLE) FOR WORKING. ALSO ON THE TOP ARE CONNECTION FOR AGITATOR, WATER, AND CLEANING OVER ONE SPRAY BALL. THE TEMPERATURE SENSORS PT100 ARE ON THE SITE ON MASHING TUN FOR THE TEMPERATURE CONTROL. LAUTER TUN / WHIRLPOOL VOLUME BRUTTO: 1200 LITER VOLUME NET: 1000 LITER BOTTOM: STRAINER FOR WORT INSULATING: 60 MM MATERIAL: 1.4301 LAUTER TUN MOUNTED ALSO ON THE FRAME WITH 3 STAINLESS STEEL FEET. ON THE TOP OF TUBE ARE CYLINDER CONIC CAP, WHICH IS ABLE TO OPEN FOR WORKING (ALSO WITH MANHOLE). ON THE SITE ARE EXISTING LOOP HOLE FOR TO DRAIN BREWERS GRAINS (DRAFF). THE BREW HOUSE WILL BE COMPLETELY INSTALLED BEFORE DELIVERY FOR WORKS INSPECTION. ALL CONNECTIONS/FITTINGS FOR WATER PIPE, GAS AND ELECTRICAL, EXHAUST VAPOUR, CHIMNEY AND WASTE DISCHARGE MUST BE DONE BY THE CLIENT IN ORDER TO START THE PRODUCTION. BREW HOUSE WORT / BREW 10 HL MALT / BREW APPROX.190 KG NECESSARY PER BATCH MASHING TUN INSULATED ALSO USED AS WORT BOILER: 1 X MASHING TUBE 1200 LITER INSULATED BRUTTO WITH FRAME AND FEET. 1 X AGITATOR 60 REV/MIN 1 X SPRAY BALL WITH BALL VALVE 1 X TEMPERATURE SENSOR PT 100 FOR CONTROL OF THE TEMPERATURE IN THE MASH TUN 1 X MANHOLE DN 400 1 X GAS BURNER LAUTER TUN / WHIRLPOOL: 1 X LAUTER TUN 1200 LITER BRUTTO WITH FRAME AND FEET 1 X CENTRIFUGAL PUMP MADE OF STAINLESS STEEL WITH COVER AND FEET 1 X MANHOLE DN 400 1 X LOOPHOLE 440 X 332 FOR TO DRAIN BREWERS GRAINS 1 X SPRAY BALL WITH BALL VALVE 1 X AGITATOR WITH 3 REV/MIN TO HACK BREWERS GRAINS 1 X GRIT FLOOR IN STAINLESS STEEL 1 X CONTROL SYSTEM MANUAL (WITHOUT MASH AUTOMATIC) 1 X SET OF BUTTERFLY VALVES IN DN 25 AND ALL PIPING FOR MASH AND WORT 1 X PLATE HEAT EXCHANGER WORT / COLD WATER WITH THIS HEAT EXCHANGER YOU CAN COOL DOWN THE WORT FROM 98�C TO APPROX. 15�C TRAINING OF BREWERY OPERATORS (UPON REQUEST) COMMISSIONING AND INSTRUCTIONS (UPON REQUEST) DELIVERY: EX-WORKS, D-97753 KARLSTADT PRICES: NET, EXCL.VAT PACKAGING: SAFETY PACKING FOR TRANSPORT DELIVERY TIME: 4 � 6 WEEKS AFTER ORDER CONFIRMATION DELIVERY CONDITIONS: 50% IN ADVANCE BY ORDER AGAINST BANK GUARANTEE FROM EUROLUX BANK 50% IN ADVANCE BEFORE DELIVERY AND CONTROL NECESSARY SPACE FOR MASH AND LAUTER TUN: LXWXH: 3,10 X 2,10 X 2,80 M NECESSARY SPACE FOR TANKS: LXWXH: 6,00 X 5,00 X 2,50 M
Vendedor: Eurolux GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-rubber extruder gs 120/k-14d-m.spw.
strainer extruder up to 500 bar
new, temperature-controlled feed roll
hydraulic clamp with hose slit extrusion head
dc drive motor 64,5 kw
steel baseplate

the machine can be modified/overhauled according to customer\s specification. RUBBER EXTRUDER GS 120/K-14D-M.SPW. STRAINER EXTRUDER UP TO 500 BAR NEW, TEMPERATURE-CONTROLLED FEED ROLL HYDRAULIC CLAMP WITH HOSE SLIT EXTRUSION HEAD DC DRIVE MOTOR 64,5 KW STEEL BASEPLATE THE MACHINE CAN BE MODIFIED/OVERHAULED ACCORDING TO CUSTOMER\S SPECIFICATION.
Vendedor: K & K Industrievertretungen GmbH
Año de construcción: usado
Precio: 99.765 €
Ubicación: Land-cat.-nr. 11-3210

new

basic equipment

the brew house is complete with all equipment. all equipment are with high standard an very simple to use. this 10 hl brew house is built as 2 devices-brew house manual version with manual butterfly valve. it is possible to make 2 brews/day (40 hl) 

technology

all the pipes can be cleaned and sterilized in the circuit over the pump included. 

a) in the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun.
b) after the lauter wort will be pumped back to the mash boiler.
c) after emptying the lauter tun the grit floor will be removed. the lauter tun will be changed to a whirlpool.
d) after cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool.

mashing tun / wort boiler
volume brutto:			2400 liter
volume net:			2000 liter
heating system:			gas burner propan
insulating:			60 mm
material:			stainless steel (aisi 304 - 1.4301)

mashing tun mounted on the frame with 3 stainless steel feet. on the top of mashing tun are cylinder conic cap, which is able to open (manhole) for working.
also on the top are connection for agitator, water, and cleaning over one spray ball. the temperature sensors pt100 are on the site on mashing tun for the temperature control.

lauter tun / whirlpool
volume brutto:			2400 liter
volume net:			2000 liter
bottom:				strainer for wort
insulating:			60 mm
material:			1.4301

lauter tun mounted also on the frame with 3 stainless steel feet. on the top of  tube are cylinder conic cap, which is able to open for working (also with manhole). on the site are existing loop hole for to drain brewers grains (draff).

the brew house are pre assembled all the piping are pre-assembled. after the connection of water pipe, gas and electrical connection (not included in the offer) you can start with the production.

brew house

wort / brew		20 hl
malt / brew		approx.380 kg necessary per batch

mashing tun insulated also used as wort boiler:
1 x mashing tube 2400 liter insulated brutto with frame and feet.
1 x agitator 60 rev/min
1 x spray ball with ball valve
1 x temperature sensor pt 100 for control of the temperature in the mash tun
1 x manhole dn 400
1 x gas burner

lauter tun / whirlpool:
1 x lauter tun 2400 liter brutto with frame and feet
1 x centrifugal pump made of stainless steel with cover and feet
1 x manhole dn 400 										
1 x loophole 440 x 332 for to drain brewers grains						
1 x spray ball with ball valve									
1 x agitator with 3 rev/min to hack brewers grains				

1 x grit floor in stainless steel
1 x control system manual (without mash automatic)
1 x set of butterfly valves in dn 25 and all piping for mash and wort
1 x plate heat exchanger wort / cold water
with this heat exchanger you can cool down the wort from 98°c to approx. 15°c

luxury equipment as follows (upon request):

qt description
1 malt mill with funnel, sack holder and frame in stainless steel 
1 set of beer hose
2 sight glass with lighting right/left
1 fine sieve dn 25
1 wort aerator 
1 temperature sensor pt 100 
1 inverter for mixer 
1 operating platform with stairs with hand rail in stainless steel
1 x hot water tank insulated
capacity: 2400 litres

1 x cold/ice water tank with cooling jacket insulated
capacity: 2400 litres 
3 x fermentation tanks with flat conical bottom and with cooling jacket
working pressure max.1,5 bar – capacity: 2400 litres
(without certification) 
5 x storage tanks with flat conical bottom and without cooling jacket
working pressure max.1,5 bar - capacity: 2400 litres

delivery possible upon request:
1 x control cabinet mash automatic 
1 x control cabinet with touch-screen with mash automatic 
1 x full automatic keg washer 
1 x bottle pressure filler with 4 stations 
1 x cold water cooling system 
1 x cooling device for cold water 

all prices upon request.

training of brewery operators (upon request)
commissioning and instructions (upon request)

delivery time: 4 – 6 weeks after order confirmation

necessary space for mash and lauter tun: lxwxh: 3,00 x 2,00 x 2,40 m
necessary space for tanks: lxwxh: 5,00 x 3,00 x 2,00 m

for more information please contact us under: phone +49(0)9353-909050
fax: 09353-9090522, mobile: 0171-6518248

subject to prior sale.
all prices are valid ex-works, excl.vat.	    		
freight charges: depending on dimensions and destination. CAT.-NR. 11-3210 NEW BASIC EQUIPMENT THE BREW HOUSE IS COMPLETE WITH ALL EQUIPMENT. ALL EQUIPMENT ARE WITH HIGH STANDARD AN VERY SIMPLE TO USE. THIS 10 HL BREW HOUSE IS BUILT AS 2 DEVICES-BREW HOUSE MANUAL VERSION WITH MANUAL BUTTERFLY VALVE. IT IS POSSIBLE TO MAKE 2 BREWS/DAY (40 HL) TECHNOLOGY ALL THE PIPES CAN BE CLEANED AND STERILIZED IN THE CIRCUIT OVER THE PUMP INCLUDED. A) IN THE MASH BOILER THE MASH WILL BE COOKED, THEN IT WILL BE PUMPED WITH ONE BEER PUMP MADE OF STAINLESS STEEL FROM MASH BOILER TO THE LAUTER TUN. B) AFTER THE LAUTER WORT WILL BE PUMPED BACK TO THE MASH BOILER. C) AFTER EMPTYING THE LAUTER TUN THE GRIT FLOOR WILL BE REMOVED. THE LAUTER TUN WILL BE CHANGED TO A WHIRLPOOL. D) AFTER COOKING THE HOPS A SPECIAL INJECTION VALVE IS INTRODUCED INSIDE THE LAUTER TUN SO THAT IT CAN BE USED AS A WHIRLPOOL. MASHING TUN / WORT BOILER VOLUME BRUTTO: 2400 LITER VOLUME NET: 2000 LITER HEATING SYSTEM: GAS BURNER PROPAN INSULATING: 60 MM MATERIAL: STAINLESS STEEL (AISI 304 - 1.4301) MASHING TUN MOUNTED ON THE FRAME WITH 3 STAINLESS STEEL FEET. ON THE TOP OF MASHING TUN ARE CYLINDER CONIC CAP, WHICH IS ABLE TO OPEN (MANHOLE) FOR WORKING. ALSO ON THE TOP ARE CONNECTION FOR AGITATOR, WATER, AND CLEANING OVER ONE SPRAY BALL. THE TEMPERATURE SENSORS PT100 ARE ON THE SITE ON MASHING TUN FOR THE TEMPERATURE CONTROL. LAUTER TUN / WHIRLPOOL VOLUME BRUTTO: 2400 LITER VOLUME NET: 2000 LITER BOTTOM: STRAINER FOR WORT INSULATING: 60 MM MATERIAL: 1.4301 LAUTER TUN MOUNTED ALSO ON THE FRAME WITH 3 STAINLESS STEEL FEET. ON THE TOP OF TUBE ARE CYLINDER CONIC CAP, WHICH IS ABLE TO OPEN FOR WORKING (ALSO WITH MANHOLE). ON THE SITE ARE EXISTING LOOP HOLE FOR TO DRAIN BREWERS GRAINS (DRAFF). THE BREW HOUSE ARE PRE ASSEMBLED ALL THE PIPING ARE PRE-ASSEMBLED. AFTER THE CONNECTION OF WATER PIPE, GAS AND ELECTRICAL CONNECTION (NOT INCLUDED IN THE OFFER) YOU CAN START WITH THE PRODUCTION. BREW HOUSE WORT / BREW 20 HL MALT / BREW APPROX.380 KG NECESSARY PER BATCH MASHING TUN INSULATED ALSO USED AS WORT BOILER: 1 X MASHING TUBE 2400 LITER INSULATED BRUTTO WITH FRAME AND FEET. 1 X AGITATOR 60 REV/MIN 1 X SPRAY BALL WITH BALL VALVE 1 X TEMPERATURE SENSOR PT 100 FOR CONTROL OF THE TEMPERATURE IN THE MASH TUN 1 X MANHOLE DN 400 1 X GAS BURNER LAUTER TUN / WHIRLPOOL: 1 X LAUTER TUN 2400 LITER BRUTTO WITH FRAME AND FEET 1 X CENTRIFUGAL PUMP MADE OF STAINLESS STEEL WITH COVER AND FEET 1 X MANHOLE DN 400 1 X LOOPHOLE 440 X 332 FOR TO DRAIN BREWERS GRAINS 1 X SPRAY BALL WITH BALL VALVE 1 X AGITATOR WITH 3 REV/MIN TO HACK BREWERS GRAINS 1 X GRIT FLOOR IN STAINLESS STEEL 1 X CONTROL SYSTEM MANUAL (WITHOUT MASH AUTOMATIC) 1 X SET OF BUTTERFLY VALVES IN DN 25 AND ALL PIPING FOR MASH AND WORT 1 X PLATE HEAT EXCHANGER WORT / COLD WATER WITH THIS HEAT EXCHANGER YOU CAN COOL DOWN THE WORT FROM 98°C TO APPROX. 15°C LUXURY EQUIPMENT AS FOLLOWS (UPON REQUEST): QT DESCRIPTION 1 MALT MILL WITH FUNNEL, SACK HOLDER AND FRAME IN STAINLESS STEEL 1 SET OF BEER HOSE 2 SIGHT GLASS WITH LIGHTING RIGHT/LEFT 1 FINE SIEVE DN 25 1 WORT AERATOR 1 TEMPERATURE SENSOR PT 100 1 INVERTER FOR MIXER 1 OPERATING PLATFORM WITH STAIRS WITH HAND RAIL IN STAINLESS STEEL 1 X HOT WATER TANK INSULATED CAPACITY: 2400 LITRES 1 X COLD/ICE WATER TANK WITH COOLING JACKET INSULATED CAPACITY: 2400 LITRES 3 X FERMENTATION TANKS WITH FLAT CONICAL BOTTOM AND WITH COOLING JACKET WORKING PRESSURE MAX.1,5 BAR – CAPACITY: 2400 LITRES (WITHOUT CERTIFICATION) 5 X STORAGE TANKS WITH FLAT CONICAL BOTTOM AND WITHOUT COOLING JACKET WORKING PRESSURE MAX.1,5 BAR - CAPACITY: 2400 LITRES DELIVERY POSSIBLE UPON REQUEST: 1 X CONTROL CABINET MASH AUTOMATIC 1 X CONTROL CABINET WITH TOUCH-SCREEN WITH MASH AUTOMATIC 1 X FULL AUTOMATIC KEG WASHER 1 X BOTTLE PRESSURE FILLER WITH 4 STATIONS 1 X COLD WATER COOLING SYSTEM 1 X COOLING DEVICE FOR COLD WATER ALL PRICES UPON REQUEST. TRAINING OF BREWERY OPERATORS (UPON REQUEST) COMMISSIONING AND INSTRUCTIONS (UPON REQUEST) DELIVERY TIME: 4 – 6 WEEKS AFTER ORDER CONFIRMATION NECESSARY SPACE FOR MASH AND LAUTER TUN: LXWXH: 3,00 X 2,00 X 2,40 M NECESSARY SPACE FOR TANKS: LXWXH: 5,00 X 3,00 X 2,00 M FOR MORE INFORMATION PLEASE CONTACT US UNDER: PHONE +49(0)9353-909050 FAX: 09353-9090522, MOBILE: 0171-6518248 SUBJECT TO PRIOR SALE. ALL PRICES ARE VALID EX-WORKS, EXCL.VAT. FREIGHT CHARGES: DEPENDING ON DIMENSIONS AND DESTINATION.
Vendedor: Eurolux GmbH & Co.KG
Año de construcción: usado
Precio: 53.870 €
Ubicación: Land-cat.-nr. 11-3200

new

necessary space for mash and lauter tun: 	lxwxh: 3 x 2 x 2,80 m
necessary space for tanks: 			lxwxh: 4,0 x 5,0 m

complete

2 brews / day = 10hl

basic equipment

the brew house is complete with all equipment. all equipment are with high standard an very simple to use. this 5 hl brew house is built as 2 devices-brew house manual version with manual butterfly valve. it is possible to make 2 brews/day (10 hl) 

technology

all the pipes can be cleaned and sterilized in the circuit over the pump included. 

a) in the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun.
b) after the lauter wort will be pumped back to the mash boiler.
c) after emptying the lauter tun the grit floor will be removed. the lauter tun will be changed to a whirlpool.
d) after cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool.

mashing tun / wort boiler
volume brutto:			650 liter
volume net:			500 liter
heating system:			gas burner propan
insulating:			60 mm
material:			stainless steel (aisi 304 - 1.4301)

mashing tun mounted on the frame with 3 stainless steel feet. on the top of mashing tun are cylinder conic cap, which is able to open (manhole) for working.
also on the top are connection for agitator, water, and cleaning over one spray ball. the temperature sensors pt100 are on the site on mashing tun for the temperature control.

lauter tun / whirlpool
volume brutto:			650 liter
volume net:			500 liter
bottom:				strainer for wort
insulating:			60 mm
material:			1.4301

lauter tun mounted also on the frame with 3 stainless steel feet. on the top of  tube are cylinder conic cap, which is able to open for working (also with manhole). on the site are existing loop hole for to drain brewers grains (draff).

the brew house are pre assembled all the piping are pre-assembled. after the connection of water pipe, gas and electrical connection (not included in the offer) you can start with the production.

brew house

wort / brew		5 hl
malt / brew		approx.95 kg necessary per batch

mashing tun insulated also used as wort boiler:
1 x mashing tube 650 liter insulated brutto with frame and feet.
1 x agitator 60 rev/min
1 x spray ball with ball valve
1 x temperature sensor pt 100 for control of the temperature in the mash tun
1 x manhole dn 400
1 x gas burner

lauter tun / whirlpool:
1 x lauter tun 650 liter brutto with frame and feet
1 x centrifugal pump made of stainless steel with cover and feet
1 x manhole dn 400 										
1 x loophole 440 x 332 for to drain brewers grains						
1 x spray ball with ball valve									
1 x agitator with 3 rev/min to hack brewers grains		
1 x grit floor in stainless steel								
1 x control system manual (without mash automatic)
1 x set of butterfly valves in dn 25 and all piping for mash and wort			
1 x plate heat exchanger wort / cold water 					
with this heat exchanger you can cool down the wort from 98°c to approx. 15°c		

luxury equipment as follows:

qt  description
1 x malt mill with funnel, sack holder and frame in stainless steel			
1 x set of beer hose									
2 x sight glass with lighting right/left 
1 x fine sieve dn 25 									
1 x wort aerator										
1 x temperature sensor pt 100								
1 x inverter for mixer									
1 x operating platform with stairs with hand rail in stainless steel			

1 x hot water tank insulated
capacity: 1200 litres						
with insert heating element 230/400v, 7,5 kw, in aisi 1.4571
regulate 30 – 110°c										
attention: only for temperature maintenance
first: the brew water must be heated with the gas burner in the mash tun		

1 x cold/ice water tank with cooling jacket insulated 
capacity: 1200 litres										

3 x fermentation tanks with flat conical bottom and with cooling jacket
working pressure max.1,5 bar – capacity: 600 litres
(without certification) 

5 x storage tanks with flat conical bottom and without cooling jacket
working pressure max.1,5 bar - capacity: 600 litres 
			
delivery possible upon request:
1 x control cabinet mash automatic								
1 x control cabinet with touch-screen with mash automatic				
1 x full automatic keg washer								
1 x bottle pressure filler with 4 stations							
1 x cold water cooling system								

1 x cooling device for cold water					

all prices is upon request.			

training of brewery operators (upon request)

commissioning and instructions (upon request)

packaging:		safety packing for transport
delivery time:		4 – 6 weeks after order confirmation

for more information please contact us under: phone +49(0)9353-909050
fax: 09353-9090522, mobile: 0171-6518248

subject to prior sale.
all prices are valid ex-works, excl.vat.	    		
freight charges: depending on dimensions and destination. CAT.-NR. 11-3200 NEW NECESSARY SPACE FOR MASH AND LAUTER TUN: LXWXH: 3 X 2 X 2,80 M NECESSARY SPACE FOR TANKS: LXWXH: 4,0 X 5,0 M COMPLETE 2 BREWS / DAY = 10HL BASIC EQUIPMENT THE BREW HOUSE IS COMPLETE WITH ALL EQUIPMENT. ALL EQUIPMENT ARE WITH HIGH STANDARD AN VERY SIMPLE TO USE. THIS 5 HL BREW HOUSE IS BUILT AS 2 DEVICES-BREW HOUSE MANUAL VERSION WITH MANUAL BUTTERFLY VALVE. IT IS POSSIBLE TO MAKE 2 BREWS/DAY (10 HL) TECHNOLOGY ALL THE PIPES CAN BE CLEANED AND STERILIZED IN THE CIRCUIT OVER THE PUMP INCLUDED. A) IN THE MASH BOILER THE MASH WILL BE COOKED, THEN IT WILL BE PUMPED WITH ONE BEER PUMP MADE OF STAINLESS STEEL FROM MASH BOILER TO THE LAUTER TUN. B) AFTER THE LAUTER WORT WILL BE PUMPED BACK TO THE MASH BOILER. C) AFTER EMPTYING THE LAUTER TUN THE GRIT FLOOR WILL BE REMOVED. THE LAUTER TUN WILL BE CHANGED TO A WHIRLPOOL. D) AFTER COOKING THE HOPS A SPECIAL INJECTION VALVE IS INTRODUCED INSIDE THE LAUTER TUN SO THAT IT CAN BE USED AS A WHIRLPOOL. MASHING TUN / WORT BOILER VOLUME BRUTTO: 650 LITER VOLUME NET: 500 LITER HEATING SYSTEM: GAS BURNER PROPAN INSULATING: 60 MM MATERIAL: STAINLESS STEEL (AISI 304 - 1.4301) MASHING TUN MOUNTED ON THE FRAME WITH 3 STAINLESS STEEL FEET. ON THE TOP OF MASHING TUN ARE CYLINDER CONIC CAP, WHICH IS ABLE TO OPEN (MANHOLE) FOR WORKING. ALSO ON THE TOP ARE CONNECTION FOR AGITATOR, WATER, AND CLEANING OVER ONE SPRAY BALL. THE TEMPERATURE SENSORS PT100 ARE ON THE SITE ON MASHING TUN FOR THE TEMPERATURE CONTROL. LAUTER TUN / WHIRLPOOL VOLUME BRUTTO: 650 LITER VOLUME NET: 500 LITER BOTTOM: STRAINER FOR WORT INSULATING: 60 MM MATERIAL: 1.4301 LAUTER TUN MOUNTED ALSO ON THE FRAME WITH 3 STAINLESS STEEL FEET. ON THE TOP OF TUBE ARE CYLINDER CONIC CAP, WHICH IS ABLE TO OPEN FOR WORKING (ALSO WITH MANHOLE). ON THE SITE ARE EXISTING LOOP HOLE FOR TO DRAIN BREWERS GRAINS (DRAFF). THE BREW HOUSE ARE PRE ASSEMBLED ALL THE PIPING ARE PRE-ASSEMBLED. AFTER THE CONNECTION OF WATER PIPE, GAS AND ELECTRICAL CONNECTION (NOT INCLUDED IN THE OFFER) YOU CAN START WITH THE PRODUCTION. BREW HOUSE WORT / BREW 5 HL MALT / BREW APPROX.95 KG NECESSARY PER BATCH MASHING TUN INSULATED ALSO USED AS WORT BOILER: 1 X MASHING TUBE 650 LITER INSULATED BRUTTO WITH FRAME AND FEET. 1 X AGITATOR 60 REV/MIN 1 X SPRAY BALL WITH BALL VALVE 1 X TEMPERATURE SENSOR PT 100 FOR CONTROL OF THE TEMPERATURE IN THE MASH TUN 1 X MANHOLE DN 400 1 X GAS BURNER LAUTER TUN / WHIRLPOOL: 1 X LAUTER TUN 650 LITER BRUTTO WITH FRAME AND FEET 1 X CENTRIFUGAL PUMP MADE OF STAINLESS STEEL WITH COVER AND FEET 1 X MANHOLE DN 400 1 X LOOPHOLE 440 X 332 FOR TO DRAIN BREWERS GRAINS 1 X SPRAY BALL WITH BALL VALVE 1 X AGITATOR WITH 3 REV/MIN TO HACK BREWERS GRAINS 1 X GRIT FLOOR IN STAINLESS STEEL 1 X CONTROL SYSTEM MANUAL (WITHOUT MASH AUTOMATIC) 1 X SET OF BUTTERFLY VALVES IN DN 25 AND ALL PIPING FOR MASH AND WORT 1 X PLATE HEAT EXCHANGER WORT / COLD WATER WITH THIS HEAT EXCHANGER YOU CAN COOL DOWN THE WORT FROM 98°C TO APPROX. 15°C LUXURY EQUIPMENT AS FOLLOWS: QT DESCRIPTION 1 X MALT MILL WITH FUNNEL, SACK HOLDER AND FRAME IN STAINLESS STEEL 1 X SET OF BEER HOSE 2 X SIGHT GLASS WITH LIGHTING RIGHT/LEFT 1 X FINE SIEVE DN 25 1 X WORT AERATOR 1 X TEMPERATURE SENSOR PT 100 1 X INVERTER FOR MIXER 1 X OPERATING PLATFORM WITH STAIRS WITH HAND RAIL IN STAINLESS STEEL 1 X HOT WATER TANK INSULATED CAPACITY: 1200 LITRES WITH INSERT HEATING ELEMENT 230/400V, 7,5 KW, IN AISI 1.4571 REGULATE 30 – 110°C ATTENTION: ONLY FOR TEMPERATURE MAINTENANCE FIRST: THE BREW WATER MUST BE HEATED WITH THE GAS BURNER IN THE MASH TUN 1 X COLD/ICE WATER TANK WITH COOLING JACKET INSULATED CAPACITY: 1200 LITRES 3 X FERMENTATION TANKS WITH FLAT CONICAL BOTTOM AND WITH COOLING JACKET WORKING PRESSURE MAX.1,5 BAR – CAPACITY: 600 LITRES (WITHOUT CERTIFICATION) 5 X STORAGE TANKS WITH FLAT CONICAL BOTTOM AND WITHOUT COOLING JACKET WORKING PRESSURE MAX.1,5 BAR - CAPACITY: 600 LITRES DELIVERY POSSIBLE UPON REQUEST: 1 X CONTROL CABINET MASH AUTOMATIC 1 X CONTROL CABINET WITH TOUCH-SCREEN WITH MASH AUTOMATIC 1 X FULL AUTOMATIC KEG WASHER 1 X BOTTLE PRESSURE FILLER WITH 4 STATIONS 1 X COLD WATER COOLING SYSTEM 1 X COOLING DEVICE FOR COLD WATER ALL PRICES IS UPON REQUEST. TRAINING OF BREWERY OPERATORS (UPON REQUEST) COMMISSIONING AND INSTRUCTIONS (UPON REQUEST) PACKAGING: SAFETY PACKING FOR TRANSPORT DELIVERY TIME: 4 – 6 WEEKS AFTER ORDER CONFIRMATION FOR MORE INFORMATION PLEASE CONTACT US UNDER: PHONE +49(0)9353-909050 FAX: 09353-9090522, MOBILE: 0171-6518248 SUBJECT TO PRIOR SALE. ALL PRICES ARE VALID EX-WORKS, EXCL.VAT. FREIGHT CHARGES: DEPENDING ON DIMENSIONS AND DESTINATION.
Vendedor: Eurolux GmbH & Co.KG
Año de construcción: usado
Precio: 77.650 €
Ubicación: Land-cat.-nr. 11-3205

new

necessary space for mash and lauter tun: lxwxh: 3,10 x 2,10 x 2,80 m
necessary space for tanks: lxwxh: 6,00 x 5,00 x 2,50 m

complete 
2 brews / day = 20 hl   

basic equipment

the brew house is complete with all equipment. all equipment are with high standard an very simple to use. this 10 hl brew house is built as 2 devices-brew house manual version with manual butterfly valve. it is possible to make 2 brews/day (20 hl) 

technology

all the pipes can be cleaned and sterilized in the circuit over the pump included. 

a) in the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun.
b) after the lauter wort will be pumped back to the mash boiler.
c) after emptying the lauter tun the grit floor will be removed. the lauter tun will be changed to a whirlpool.
d) after cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool.

mashing tun / wort boiler
volume brutto:			1200 liter
volume net:			1000 liter
heating system:			gas burner propan
insulating:			60 mm
material:			stainless steel (aisi 304 - 1.4301)

mashing tun mounted on the frame with 3 stainless steel feet. on the top of mashing tun are cylinder conic cap, which is able to open (manhole) for working.
also on the top are connection for agitator, water, and cleaning over one spray ball. the temperature sensors pt100 are on the site on mashing tun for the temperature control.

lauter tun / whirlpool
volume brutto:			1200 liter
volume net:			1000 liter
bottom:				strainer for wort
insulating:			60 mm
material:			1.4301

lauter tun mounted also on the frame with 3 stainless steel feet. on the top of  tube are cylinder conic cap, which is able to open for working (also with manhole). on the site are existing loop hole for to drain brewers grains (draff).

the brew house are pre assembled all the piping are pre-assembled. after the connection of water pipe, gas and electrical connection (not included in the offer) you can start with the production.

brew house

wort / brew		10 hl
malt / brew		approx.190 kg necessary per batch

mashing tun insulated also used as wort boiler:
1 x mashing tube 1200 liter insulated brutto with frame and feet.
1 x agitator 60 rev/min
1 x spray ball with ball valve
1 x temperature sensor pt 100 for control of the temperature in the mash tun
1 x manhole dn 400
1 x gas burner

lauter tun / whirlpool:
1 x lauter tun 1200 liter brutto with frame and feet
1 x centrifugal pump made of stainless steel with cover and feet
1 x manhole dn 400 										
1 x loophole 440 x 332 for to drain brewers grains						
1 x spray ball with ball valve									
1 x agitator with 3 rev/min to hack brewers grains		

1 x grit floor in stainless steel								
1 x control system manual (without mash automatic)
1 x set of butterfly valves in dn 25 and all piping for mash and wort			
1 x plate heat exchanger wort / cold water							
with this heat exchanger you can cool down the wort from 98°c to approx. 15°c

luxury equipment as follows:

qt	description
1	malt mill with funnel, sack holder and frame in stainless steel			
1	set of beer hose									
2	sight glass with lighting right/left 
1	fine sieve dn 
1	wort aerator		
1	temperature sensor pt 100								
1	inverter for mixer 									
1	operating platform with stairs with hand rail in stainless steel			

1 x hot water tank insulated
capacity: 1200 litres 			
with insert heating element 230/400v, 7,5 kw, in aisi 1.4571
regulate 30 – 110°c										
attention: only for temperature maintenance
first: the brew water must be heated with the gas burner in the mash tun		

1 x cold/ice water tank with cooling jacket insulated 
capacity: 1200 litres

3 x fermentation tanks with flat conical bottom and with cooling jacket
working pressure max.1,5 bar – capacity: 1200 litres
(without certification) 

5 x storage tanks with flat conical bottom and without cooling jacket
working pressure max.1,5 bar - capacity: 1000 litres 

delivery possible upon request:
1 x control cabinet mash automatic								10.390,00
1 x control cabinet with touch-screen with mash automatic				
1 x full automatic keg washer								
1 x bottle pressure filler with 4 stations							  
1 x cold water cooling system								
1 x cooling device for cold water								

all prices upon request

training of brewery operators (upon request)

commissioning and instructions (upon request)

delivery time:		4 – 6 weeks after order confirmation

availabele: 1

also available: for 5 or 20 hl.

for more information please contact us under: phone +49(0)9353-909050
fax: 09353-9090522, mobile: 0171-6518248

subject to prior sale.
all prices are valid ex-works, excl.vat.	    		
freight charges: depending on dimensions and destination. CAT.-NR. 11-3205 NEW NECESSARY SPACE FOR MASH AND LAUTER TUN: LXWXH: 3,10 X 2,10 X 2,80 M NECESSARY SPACE FOR TANKS: LXWXH: 6,00 X 5,00 X 2,50 M COMPLETE 2 BREWS / DAY = 20 HL BASIC EQUIPMENT THE BREW HOUSE IS COMPLETE WITH ALL EQUIPMENT. ALL EQUIPMENT ARE WITH HIGH STANDARD AN VERY SIMPLE TO USE. THIS 10 HL BREW HOUSE IS BUILT AS 2 DEVICES-BREW HOUSE MANUAL VERSION WITH MANUAL BUTTERFLY VALVE. IT IS POSSIBLE TO MAKE 2 BREWS/DAY (20 HL) TECHNOLOGY ALL THE PIPES CAN BE CLEANED AND STERILIZED IN THE CIRCUIT OVER THE PUMP INCLUDED. A) IN THE MASH BOILER THE MASH WILL BE COOKED, THEN IT WILL BE PUMPED WITH ONE BEER PUMP MADE OF STAINLESS STEEL FROM MASH BOILER TO THE LAUTER TUN. B) AFTER THE LAUTER WORT WILL BE PUMPED BACK TO THE MASH BOILER. C) AFTER EMPTYING THE LAUTER TUN THE GRIT FLOOR WILL BE REMOVED. THE LAUTER TUN WILL BE CHANGED TO A WHIRLPOOL. D) AFTER COOKING THE HOPS A SPECIAL INJECTION VALVE IS INTRODUCED INSIDE THE LAUTER TUN SO THAT IT CAN BE USED AS A WHIRLPOOL. MASHING TUN / WORT BOILER VOLUME BRUTTO: 1200 LITER VOLUME NET: 1000 LITER HEATING SYSTEM: GAS BURNER PROPAN INSULATING: 60 MM MATERIAL: STAINLESS STEEL (AISI 304 - 1.4301) MASHING TUN MOUNTED ON THE FRAME WITH 3 STAINLESS STEEL FEET. ON THE TOP OF MASHING TUN ARE CYLINDER CONIC CAP, WHICH IS ABLE TO OPEN (MANHOLE) FOR WORKING. ALSO ON THE TOP ARE CONNECTION FOR AGITATOR, WATER, AND CLEANING OVER ONE SPRAY BALL. THE TEMPERATURE SENSORS PT100 ARE ON THE SITE ON MASHING TUN FOR THE TEMPERATURE CONTROL. LAUTER TUN / WHIRLPOOL VOLUME BRUTTO: 1200 LITER VOLUME NET: 1000 LITER BOTTOM: STRAINER FOR WORT INSULATING: 60 MM MATERIAL: 1.4301 LAUTER TUN MOUNTED ALSO ON THE FRAME WITH 3 STAINLESS STEEL FEET. ON THE TOP OF TUBE ARE CYLINDER CONIC CAP, WHICH IS ABLE TO OPEN FOR WORKING (ALSO WITH MANHOLE). ON THE SITE ARE EXISTING LOOP HOLE FOR TO DRAIN BREWERS GRAINS (DRAFF). THE BREW HOUSE ARE PRE ASSEMBLED ALL THE PIPING ARE PRE-ASSEMBLED. AFTER THE CONNECTION OF WATER PIPE, GAS AND ELECTRICAL CONNECTION (NOT INCLUDED IN THE OFFER) YOU CAN START WITH THE PRODUCTION. BREW HOUSE WORT / BREW 10 HL MALT / BREW APPROX.190 KG NECESSARY PER BATCH MASHING TUN INSULATED ALSO USED AS WORT BOILER: 1 X MASHING TUBE 1200 LITER INSULATED BRUTTO WITH FRAME AND FEET. 1 X AGITATOR 60 REV/MIN 1 X SPRAY BALL WITH BALL VALVE 1 X TEMPERATURE SENSOR PT 100 FOR CONTROL OF THE TEMPERATURE IN THE MASH TUN 1 X MANHOLE DN 400 1 X GAS BURNER LAUTER TUN / WHIRLPOOL: 1 X LAUTER TUN 1200 LITER BRUTTO WITH FRAME AND FEET 1 X CENTRIFUGAL PUMP MADE OF STAINLESS STEEL WITH COVER AND FEET 1 X MANHOLE DN 400 1 X LOOPHOLE 440 X 332 FOR TO DRAIN BREWERS GRAINS 1 X SPRAY BALL WITH BALL VALVE 1 X AGITATOR WITH 3 REV/MIN TO HACK BREWERS GRAINS 1 X GRIT FLOOR IN STAINLESS STEEL 1 X CONTROL SYSTEM MANUAL (WITHOUT MASH AUTOMATIC) 1 X SET OF BUTTERFLY VALVES IN DN 25 AND ALL PIPING FOR MASH AND WORT 1 X PLATE HEAT EXCHANGER WORT / COLD WATER WITH THIS HEAT EXCHANGER YOU CAN COOL DOWN THE WORT FROM 98°C TO APPROX. 15°C LUXURY EQUIPMENT AS FOLLOWS: QT DESCRIPTION 1 MALT MILL WITH FUNNEL, SACK HOLDER AND FRAME IN STAINLESS STEEL 1 SET OF BEER HOSE 2 SIGHT GLASS WITH LIGHTING RIGHT/LEFT 1 FINE SIEVE DN 1 WORT AERATOR 1 TEMPERATURE SENSOR PT 100 1 INVERTER FOR MIXER 1 OPERATING PLATFORM WITH STAIRS WITH HAND RAIL IN STAINLESS STEEL 1 X HOT WATER TANK INSULATED CAPACITY: 1200 LITRES WITH INSERT HEATING ELEMENT 230/400V, 7,5 KW, IN AISI 1.4571 REGULATE 30 – 110°C ATTENTION: ONLY FOR TEMPERATURE MAINTENANCE FIRST: THE BREW WATER MUST BE HEATED WITH THE GAS BURNER IN THE MASH TUN 1 X COLD/ICE WATER TANK WITH COOLING JACKET INSULATED CAPACITY: 1200 LITRES 3 X FERMENTATION TANKS WITH FLAT CONICAL BOTTOM AND WITH COOLING JACKET WORKING PRESSURE MAX.1,5 BAR – CAPACITY: 1200 LITRES (WITHOUT CERTIFICATION) 5 X STORAGE TANKS WITH FLAT CONICAL BOTTOM AND WITHOUT COOLING JACKET WORKING PRESSURE MAX.1,5 BAR - CAPACITY: 1000 LITRES DELIVERY POSSIBLE UPON REQUEST: 1 X CONTROL CABINET MASH AUTOMATIC 10.390,00 1 X CONTROL CABINET WITH TOUCH-SCREEN WITH MASH AUTOMATIC 1 X FULL AUTOMATIC KEG WASHER 1 X BOTTLE PRESSURE FILLER WITH 4 STATIONS 1 X COLD WATER COOLING SYSTEM 1 X COOLING DEVICE FOR COLD WATER ALL PRICES UPON REQUEST TRAINING OF BREWERY OPERATORS (UPON REQUEST) COMMISSIONING AND INSTRUCTIONS (UPON REQUEST) DELIVERY TIME: 4 – 6 WEEKS AFTER ORDER CONFIRMATION AVAILABELE: 1 ALSO AVAILABLE: FOR 5 OR 20 HL. FOR MORE INFORMATION PLEASE CONTACT US UNDER: PHONE +49(0)9353-909050 FAX: 09353-9090522, MOBILE: 0171-6518248 SUBJECT TO PRIOR SALE. ALL PRICES ARE VALID EX-WORKS, EXCL.VAT. FREIGHT CHARGES: DEPENDING ON DIMENSIONS AND DESTINATION.
Vendedor: Eurolux GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more RAINER types: