58 ofertas

Año de construcción: usado
Ubicación: Land--closed version
-fully operational

-clamping surface: 900 x 500 mm
-traverse path x-axis: 650 mm
-travel y-axis: 450 mm
-traverse path z-axis: 250 mm
-z transmission rate: 350 mm
-supply voltage: 230 v
-dimensions wxhxd: 1160 x 1700 x 1110 mm
-weight: 280 kg -CLOSED VERSION -FULLY OPERATIONAL -CLAMPING SURFACE: 900 X 500 MM -TRAVERSE PATH X-AXIS: 650 MM -TRAVEL Y-AXIS: 450 MM -TRAVERSE PATH Z-AXIS: 250 MM -Z TRANSMISSION RATE: 350 MM -SUPPLY VOLTAGE: 230 V -DIMENSIONS WXHXD: 1160 X 1700 X 1110 MM -WEIGHT: 280 KG
Vendedor: ZIEGLER - Maschinen & Werkzeuge
Año de construcción: usado
Ubicación: Land-punching capacity: kn,cutting capacity : 9,0 t,control: ,weight of the machine ca.: 24,0 t,has been part of a fully automated manufacturing process (production of components for the production of washing machines in a mass production) the transfer line was controlled by a central master computer.  the following workstations are included in this press line: uncoiler,  leveler,  feeder - 3 hydraulic presses - cutting knife  plant consists of: 1. uncoiler: millutensil, smo 6000, coil weight approx. 4500kg, belt width max: 630mm with sliding     coil limitation, outer coil Ø range approx. 1500mm, Ø of coil shaft 420-520mm adjustable via 3 spreading arms,     equipped with speed control, dimensions of the decoiler: l: 2300 x w: 1900 x h: 2300mm 2. band straightening machine: millutensil, rm 065.c.101, belt width 660mm, 4 pressure rollers (adjustable),     height adjustment 1300mm, dimensions: l: 1800 x w: 1400 x h: 1500mm 3. feed device: type servo roll feed with siemens servomotor series 1fk7, roller pressure pneumatic     adjustable, belt guide mechanically adjustable and sensor monitoring, belt infeed height 1410mm, belt width 600mm 4. hydraulic two-column press no. 1: approx. 130to nominal force (hydraulically adjustable-controlled control valves),     ram lxwxh: 600 x 360 x 90mm, press table 1230 x 390 x 190mm, opening inside table lxw: 400 x 250mm,     stroke approx. 425mm (monitored by micropulse transducer from balluff), the press is mounted     on guide rails and can be moved mechanically (travel approx. 65mm), dimensions: l: 1060 x w: 560 x h: 1570mm 5. hydraulic c-column press no. 2: approx. 4.5to nominal force, ram lxb: 70 x 130mm,     dimension: l: 340 x w: 130 x h: 480mm 6. hydraulic two-column press no.3: approx. 180to nominal force (hydraulically adjustable-controlled control valves),    ram lxwxh: 1370 x 540 x 240mm, press table l: 1230 x w: 390 x h: 190mm incl. t-slots, stroke approx. 260mm (monitored by    micropulse transducer from balluff), the press is mounted on guide rails and can driven via servo motor and    ballscrews, approx. 80mm, dimension: l: 1200 x w: 820 x h: 1620mm  distance from press 1 and press 3 is approx. 435mm!  7. hydraulic cutting shear: type m.i. 9, stable steel frame construction, upper cutting blades guided over two columns,    tape infeed with sensors monitored and rollers guided, cutting force approx. 9,0 to, material width 560mm,    2 pieces parker hydraulic cylinder with max. 210 bar pressure capacity  further dimensions: punching table: l: 4700 x w: 2600 x h: 3200mm, feeding unit: l: 4350 x w: 2400 x h: 2500mm PUNCHING CAPACITY: KN,CUTTING CAPACITY : 9,0 T,CONTROL: ,WEIGHT OF THE MACHINE CA.: 24,0 T,HAS BEEN PART OF A FULLY AUTOMATED MANUFACTURING PROCESS (PRODUCTION OF COMPONENTS FOR THE PRODUCTION OF WASHING MACHINES IN A MASS PRODUCTION) THE TRANSFER LINE WAS CONTROLLED BY A CENTRAL MASTER COMPUTER. THE FOLLOWING WORKSTATIONS ARE INCLUDED IN THIS PRESS LINE: UNCOILER, LEVELER, FEEDER - 3 HYDRAULIC PRESSES - CUTTING KNIFE PLANT CONSISTS OF: 1. UNCOILER: MILLUTENSIL, SMO 6000, COIL WEIGHT APPROX. 4500KG, BELT WIDTH MAX: 630MM WITH SLIDING     COIL LIMITATION, OUTER COIL Ø RANGE APPROX. 1500MM, Ø OF COIL SHAFT 420-520MM ADJUSTABLE VIA 3 SPREADING ARMS,     EQUIPPED WITH SPEED CONTROL, DIMENSIONS OF THE DECOILER: L: 2300 X W: 1900 X H: 2300MM 2. BAND STRAIGHTENING MACHINE: MILLUTENSIL, RM 065.C.101, BELT WIDTH 660MM, 4 PRESSURE ROLLERS (ADJUSTABLE),     HEIGHT ADJUSTMENT 1300MM, DIMENSIONS: L: 1800 X W: 1400 X H: 1500MM 3. FEED DEVICE: TYPE SERVO ROLL FEED WITH SIEMENS SERVOMOTOR SERIES 1FK7, ROLLER PRESSURE PNEUMATIC     ADJUSTABLE, BELT GUIDE MECHANICALLY ADJUSTABLE AND SENSOR MONITORING, BELT INFEED HEIGHT 1410MM, BELT WIDTH 600MM 4. HYDRAULIC TWO-COLUMN PRESS NO. 1: APPROX. 130TO NOMINAL FORCE (HYDRAULICALLY ADJUSTABLE-CONTROLLED CONTROL VALVES),     RAM LXWXH: 600 X 360 X 90MM, PRESS TABLE 1230 X 390 X 190MM, OPENING INSIDE TABLE LXW: 400 X 250MM,     STROKE APPROX. 425MM (MONITORED BY MICROPULSE TRANSDUCER FROM BALLUFF), THE PRESS IS MOUNTED ON GUIDE RAILS AND CAN BE MOVED MECHANICALLY (TRAVEL APPROX. 65MM), DIMENSIONS: L: 1060 X W: 560 X H: 1570MM 5. HYDRAULIC C-COLUMN PRESS NO. 2: APPROX. 4.5TO NOMINAL FORCE, RAM LXB: 70 X 130MM,     DIMENSION: L: 340 X W: 130 X H: 480MM 6. HYDRAULIC TWO-COLUMN PRESS NO.3: APPROX. 180TO NOMINAL FORCE (HYDRAULICALLY ADJUSTABLE-CONTROLLED CONTROL VALVES),    RAM LXWXH: 1370 X 540 X 240MM, PRESS TABLE L: 1230 X W: 390 X H: 190MM INCL. T-SLOTS, STROKE APPROX. 260MM (MONITORED BY    MICROPULSE TRANSDUCER FROM BALLUFF), THE PRESS IS MOUNTED ON GUIDE RAILS AND CAN DRIVEN VIA SERVO MOTOR AND    BALLSCREWS, APPROX. 80MM, DIMENSION: L: 1200 X W: 820 X H: 1620MM DISTANCE FROM PRESS 1 AND PRESS 3 IS APPROX. 435MM! 7. HYDRAULIC CUTTING SHEAR: TYPE M.I. 9, STABLE STEEL FRAME CONSTRUCTION, UPPER CUTTING BLADES GUIDED OVER TWO COLUMNS,    TAPE INFEED WITH SENSORS MONITORED AND ROLLERS GUIDED, CUTTING FORCE APPROX. 9,0 TO, MATERIAL WIDTH 560MM,    2 PIECES PARKER HYDRAULIC CYLINDER WITH MAX. 210 BAR PRESSURE CAPACITY FURTHER DIMENSIONS: PUNCHING TABLE: L: 4700 X W: 2600 X H: 3200MM, FEEDING UNIT: L: 4350 X W: 2400 X H: 2500MM
Vendedor: WMW AG
Año de construcción: usado
Ubicación: Land-travel of x-axis 3230 mm
travel y-axis 1700 mm
travel z-axis 850 mm
table dimensions: 3000 x 1650 mm
distance spindle nose - table 200-1050 mm
distance between columns 1800 mm
table load of 7000 kg
	22 kw
iso 50 taper tool
spindle speeds stepless 20-3200 rpm/rpm
tool changer 24 pc
dimension / space needed 8130 x 4800 x 4250 mm
machine weight 24000 kg heidenhain itnc 530-  TRAVEL OF X-AXIS 3230 MM TRAVEL Y-AXIS 1700 MM TRAVEL Z-AXIS 850 MM TABLE DIMENSIONS: 3000 X 1650 MM DISTANCE SPINDLE NOSE - TABLE 200-1050 MM DISTANCE BETWEEN COLUMNS 1800 MM TABLE LOAD OF 7000 KG 22 KW ISO 50 TAPER TOOL SPINDLE SPEEDS STEPLESS 20-3200 RPM/RPM TOOL CHANGER 24 PC DIMENSION / SPACE NEEDED 8130 X 4800 X 4250 MM MACHINE WEIGHT 24000 KG HEIDENHAIN ITNC 530-
Vendedor: Moser Werkzeugmaschinen
Año de construcción: usado
Precio: 2.450 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-14'588 spindle hours (counter cabinet)
approx. 4'000 hours of program course (nc-a panel)

vintage: 04.2007 / commissioning: 05.2008

control: matsuura g-tech - 32i (fanuc)
traverse path x / y / z: 520 / 730 / 510 mm
spindle speed: 45 15'000 rpm
toolholder: bt 40
tool changers: 120 seats

machine dimensions w x d x h: ca. 4300 x 7000 x 3100 mm (footprint)
weight: ca. 15'000 kg

table:
-pallet size: 300 x 300 mm
-maximum load: 200 kg
-maximum workpiece size ã? x h 520 mm x 350 mm

tool:
-maximum diameter: ã?96 mm / ã?150 mm
-maximum length: 300 mm
-maximum weight: 10 kg
-tool change time: 1.1 sec

process areas:
a-axis: + 110â° ~ - 110â°
b-axis: 360â°

feeds:
x-axis: 50 / 50 m / min
y-axis: 50 / 50 m / min
z-axis: 50 / 50 m / min
a-axis: 30 min-1
c-axis: 50 min-1

special accessories of the machine:

extension of the tool magazine of standard 30 to 120 tool locations, including preparation for 240 tool places

pallet changer with 2 pallets

hsc spindle of 40 - 15'000 rpm with big-plus recording, motor: 18,5 kw, max torque: 108 nm / 1320 min-1

direct measuring system (heidenhain) for x, y, and z axes

knoll high performance radiator:
-scraper conveyor or schanierbandspã¤nefã¶rderer lifting pump with chip removal to the operating side
-coolant through the spindle with coolant pump kts25-50 tons and 17 l/min at 70 bar, 5.5 kw, coolant pressure in 3 steps selectable
-external cooling with coolant pump, capacity 100 l/min at 1.4 bar
-coolant shower with coolant pump, capacity 270 l/min at 2.3 bar
-hydrostatfilte hl-450, filter capacity 450 l/min, dimension of the total unit l x w x h approx. 2.4 x 1.7 x 2.3 m, tank capacity approx. 1,100 litres

measuring probe renishaw omp 60 for the automatic zero setting and measuring of workpieces, the tool changer in the interchangeable spindle. including easy trial software, pressure gauge for tool length measurement and tool breakage detection

8 free m functions
rotating viewing window

optional accessories for the control:

cutting force monitoring

boost the workpiece coordinate system from 6 to 54

corner chamfer and round

automatic zero point carrying

expansion of the macro variables on 100-199, 500-999

iz2/150nf hsc precision control for simultaneous 5-axis machining, consisting of:
-fast data server function
high speed precision contour control
-nano smoothing
-dynamic zero carrying, there are up to 8 different zero points to carry available
-tcpc tool center control for 5-axis simultaneous milling
-swing cycle allows you to edit on an inclined working plane

errors of technical data and intermediate sales reserved! 14'588 SPINDLE HOURS (COUNTER CABINET) APPROX. 4'000 HOURS OF PROGRAM COURSE (NC-A PANEL) VINTAGE: 04.2007 / COMMISSIONING: 05.2008 CONTROL: MATSUURA G-TECH - 32I (FANUC) TRAVERSE PATH X / Y / Z: 520 / 730 / 510 MM SPINDLE SPEED: 45 15'000 RPM TOOLHOLDER: BT 40 TOOL CHANGERS: 120 SEATS MACHINE DIMENSIONS W X D X H: CA. 4300 X 7000 X 3100 MM (FOOTPRINT) WEIGHT: CA. 15'000 KG TABLE: -PALLET SIZE: 300 X 300 MM -MAXIMUM LOAD: 200 KG -MAXIMUM WORKPIECE SIZE � X H 520 MM X 350 MM TOOL: -MAXIMUM DIAMETER: �96 MM / �150 MM -MAXIMUM LENGTH: 300 MM -MAXIMUM WEIGHT: 10 KG -TOOL CHANGE TIME: 1.1 SEC PROCESS AREAS: A-AXIS: + 110° ~ - 110° B-AXIS: 360° FEEDS: X-AXIS: 50 / 50 M / MIN Y-AXIS: 50 / 50 M / MIN Z-AXIS: 50 / 50 M / MIN A-AXIS: 30 MIN-1 C-AXIS: 50 MIN-1 SPECIAL ACCESSORIES OF THE MACHINE: EXTENSION OF THE TOOL MAGAZINE OF STANDARD 30 TO 120 TOOL LOCATIONS, INCLUDING PREPARATION FOR 240 TOOL PLACES PALLET CHANGER WITH 2 PALLETS HSC SPINDLE OF 40 - 15'000 RPM WITH BIG-PLUS RECORDING, MOTOR: 18,5 KW, MAX TORQUE: 108 NM / 1320 MIN-1 DIRECT MEASURING SYSTEM (HEIDENHAIN) FOR X, Y, AND Z AXES KNOLL HIGH PERFORMANCE RADIATOR: -SCRAPER CONVEYOR OR SCHANIERBANDSPäNEFöRDERER LIFTING PUMP WITH CHIP REMOVAL TO THE OPERATING SIDE -COOLANT THROUGH THE SPINDLE WITH COOLANT PUMP KTS25-50 TONS AND 17 L/MIN AT 70 BAR, 5.5 KW, COOLANT PRESSURE IN 3 STEPS SELECTABLE -EXTERNAL COOLING WITH COOLANT PUMP, CAPACITY 100 L/MIN AT 1.4 BAR -COOLANT SHOWER WITH COOLANT PUMP, CAPACITY 270 L/MIN AT 2.3 BAR -HYDROSTATFILTE HL-450, FILTER CAPACITY 450 L/MIN, DIMENSION OF THE TOTAL UNIT L X W X H APPROX. 2.4 X 1.7 X 2.3 M, TANK CAPACITY APPROX. 1,100 LITRES MEASURING PROBE RENISHAW OMP 60 FOR THE AUTOMATIC ZERO SETTING AND MEASURING OF WORKPIECES, THE TOOL CHANGER IN THE INTERCHANGEABLE SPINDLE. INCLUDING EASY TRIAL SOFTWARE, PRESSURE GAUGE FOR TOOL LENGTH MEASUREMENT AND TOOL BREAKAGE DETECTION 8 FREE M FUNCTIONS ROTATING VIEWING WINDOW OPTIONAL ACCESSORIES FOR THE CONTROL: CUTTING FORCE MONITORING BOOST THE WORKPIECE COORDINATE SYSTEM FROM 6 TO 54 CORNER CHAMFER AND ROUND AUTOMATIC ZERO POINT CARRYING EXPANSION OF THE MACRO VARIABLES ON 100-199, 500-999 IZ2/150NF HSC PRECISION CONTROL FOR SIMULTANEOUS 5-AXIS MACHINING, CONSISTING OF: -FAST DATA SERVER FUNCTION HIGH SPEED PRECISION CONTOUR CONTROL -NANO SMOOTHING -DYNAMIC ZERO CARRYING, THERE ARE UP TO 8 DIFFERENT ZERO POINTS TO CARRY AVAILABLE -TCPC TOOL CENTER CONTROL FOR 5-AXIS SIMULTANEOUS MILLING -SWING CYCLE ALLOWS YOU TO EDIT ON AN INCLINED WORKING PLANE ERRORS OF TECHNICAL DATA AND INTERMEDIATE SALES RESERVED!
Vendedor: Müller-Maschinen AG
Año de construcción: usado
Ubicación: Land-turning diameter: 250 mm<br/>turning length: 1100 mm<br/>clamping length: 1290 mm<br/>control: boschrexroth indramotion mtx<br/>tool taper: vdi 40 <br/>main spindle::  <br/>spindle head: a8 <br/>spindle turning speed - stepless: 5.500 u/min<br/>spindle motor: 48,3 / 37,7 kw<br/>max. torque on the spindle: 384 / 399 nm<br/>c-axis: 0,001 °<br/>rapid travel (x and z-axis): 40 m/min<br/>x-travel: 320 mm<br/>y-travel: +/- 50 mm<br/>z-travel: 1290 mm<br/>total power requirement: 120 kw<br/>weight of the machine ca.: 26 t<br/>dimensions of the machine ca.: 2,95 x 3,45 x 3,9 m<br/>the effective shaft lathing machine with c-axis.<br/>this machine can be used for maching crankshafts, camshafts, stub shafts, main <br/>and auxiliary shafts.<br/>equipped with:<br/>- cnc control boschrexroth indramotion mtx<br/>- workpiece feeder<br/>- workpiece removal<br/>- 3 tool turrets each 12-fold factory sauter (left / right without tool drive,<br/>center with tool drive)<br/>- workpiece clamping device with full clamping cylinder rÖhm - clamping <br/>pressure 80bar for spindles 1 and 2<br/>- chuck from emuge on spindle 1 and from hainbuch to spindle 2<br/>- cooling for motor spindle hydac water cooler<br/>- hydraulics boschrexroth<br/>- central lubrication vogel<br/>- chip conveyor<br/><br/>- machine is dismantled<br/><br/><br/><br/><br/> TURNING DIAMETER: 250 MM
TURNING LENGTH: 1100 MM
CLAMPING LENGTH: 1290 MM
CONTROL: BOSCHREXROTH INDRAMOTION MTX
TOOL TAPER: VDI 40
MAIN SPINDLE::
SPINDLE HEAD: A8
SPINDLE TURNING SPEED - STEPLESS: 5.500 U/MIN
SPINDLE MOTOR: 48,3 / 37,7 KW
MAX. TORQUE ON THE SPINDLE: 384 / 399 NM
C-AXIS: 0,001 °
RAPID TRAVEL (X AND Z-AXIS): 40 M/MIN
X-TRAVEL: 320 MM
Y-TRAVEL: +/- 50 MM
Z-TRAVEL: 1290 MM
TOTAL POWER REQUIREMENT: 120 KW
WEIGHT OF THE MACHINE CA.: 26 T
DIMENSIONS OF THE MACHINE CA.: 2,95 X 3,45 X 3,9 M
THE EFFECTIVE SHAFT LATHING MACHINE WITH C-AXIS.
THIS MACHINE CAN BE USED FOR MACHING CRANKSHAFTS, CAMSHAFTS, STUB SHAFTS, MAIN
AND AUXILIARY SHAFTS.
EQUIPPED WITH:
- CNC CONTROL BOSCHREXROTH INDRAMOTION MTX
- WORKPIECE FEEDER
- WORKPIECE REMOVAL
- 3 TOOL TURRETS EACH 12-FOLD FACTORY SAUTER (LEFT / RIGHT WITHOUT TOOL DRIVE,
CENTER WITH TOOL DRIVE)
- WORKPIECE CLAMPING DEVICE WITH FULL CLAMPING CYLINDER RÖHM - CLAMPING
PRESSURE 80BAR FOR SPINDLES 1 AND 2
- CHUCK FROM EMUGE ON SPINDLE 1 AND FROM HAINBUCH TO SPINDLE 2
- COOLING FOR MOTOR SPINDLE HYDAC WATER COOLER
- HYDRAULICS BOSCHREXROTH
- CENTRAL LUBRICATION VOGEL
- CHIP CONVEYOR

- MACHINE IS DISMANTLED




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 500 €
Ubicación: Land-bow saw used, functional BOW SAW USED, FUNCTIONAL
Vendedor: Terra-Tec GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 250 mm<br/>turning length: 1100 mm<br/>clamping length: 1290 mm<br/>control: boschrexroth indramotion mtx<br/>tool taper: vdi 40 <br/>main spindle::  <br/>spindle head: a8 <br/>spindle turning speed - stepless: 5.500 u/min<br/>spindle motor: 48,3 / 37,7 kw<br/>max. torque on the spindle: 384 / 399 nm<br/>c-axis: 0,001 °<br/>rapid travel (x and z-axis): 40 m/min<br/>x-travel: 320 mm<br/>y-travel: +/- 50 mm<br/>z-travel: 1290 mm<br/>total power requirement: 120 kw<br/>weight of the machine ca.: 26 t<br/>dimensions of the machine ca.: 2,95 x 3,45 x 3,9 m<br/>the effective shaft lathing machine with c-axis.<br/>this machine can be used for maching crankshafts, camshafts, stub shafts, main <br/>and auxiliary shafts.<br/>equipped with:<br/>- cnc control boschrexroth indramotion mtx<br/>- workpiece feeder<br/>- workpiece removal<br/>- 3 tool turrets each 12-fold factory sauter (left / right without tool drive,<br/>center with tool drive)<br/>- workpiece clamping device with full clamping cylinder rÖhm - clamping <br/>pressure 80bar for spindles 1 and 2<br/>- chuck from emuge on spindle 1 and from hainbuch to spindle 2<br/>- cooling for motor spindle hydac water cooler<br/>- hydraulics boschrexroth<br/>- central lubrication vogel<br/>- chip conveyor<br/><br/>- machine is dismantled<br/><br/><br/><br/><br/> TURNING DIAMETER: 250 MM
TURNING LENGTH: 1100 MM
CLAMPING LENGTH: 1290 MM
CONTROL: BOSCHREXROTH INDRAMOTION MTX
TOOL TAPER: VDI 40
MAIN SPINDLE::
SPINDLE HEAD: A8
SPINDLE TURNING SPEED - STEPLESS: 5.500 U/MIN
SPINDLE MOTOR: 48,3 / 37,7 KW
MAX. TORQUE ON THE SPINDLE: 384 / 399 NM
C-AXIS: 0,001 °
RAPID TRAVEL (X AND Z-AXIS): 40 M/MIN
X-TRAVEL: 320 MM
Y-TRAVEL: +/- 50 MM
Z-TRAVEL: 1290 MM
TOTAL POWER REQUIREMENT: 120 KW
WEIGHT OF THE MACHINE CA.: 26 T
DIMENSIONS OF THE MACHINE CA.: 2,95 X 3,45 X 3,9 M
THE EFFECTIVE SHAFT LATHING MACHINE WITH C-AXIS.
THIS MACHINE CAN BE USED FOR MACHING CRANKSHAFTS, CAMSHAFTS, STUB SHAFTS, MAIN
AND AUXILIARY SHAFTS.
EQUIPPED WITH:
- CNC CONTROL BOSCHREXROTH INDRAMOTION MTX
- WORKPIECE FEEDER
- WORKPIECE REMOVAL
- 3 TOOL TURRETS EACH 12-FOLD FACTORY SAUTER (LEFT / RIGHT WITHOUT TOOL DRIVE,
CENTER WITH TOOL DRIVE)
- WORKPIECE CLAMPING DEVICE WITH FULL CLAMPING CYLINDER RÖHM - CLAMPING
PRESSURE 80BAR FOR SPINDLES 1 AND 2
- CHUCK FROM EMUGE ON SPINDLE 1 AND FROM HAINBUCH TO SPINDLE 2
- COOLING FOR MOTOR SPINDLE HYDAC WATER COOLER
- HYDRAULICS BOSCHREXROTH
- CENTRAL LUBRICATION VOGEL
- CHIP CONVEYOR

- MACHINE IS DISMANTLED




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 500 €
Ubicación: Land-bow saw used, functional BOW SAW USED, FUNCTIONAL
Vendedor: Terra-Tec GmbH
Año de construcción: usado
Ubicación: Land-fr France, 68190 Ensisheim
Vendedor: Retec Machines S.A.S
Año de construcción: usado
Ubicación: Land-hacksaw carif

saw capacity: 320 mm round
blade length: 500 mm
 	 
country of origin: italy
machine weight: 500 kg HACKSAW CARIF SAW CAPACITY: 320 MM ROUND BLADE LENGTH: 500 MM COUNTRY OF ORIGIN: ITALY MACHINE WEIGHT: 500 KG
Vendedor: Valk Machines B.V.
Año de construcción: usado
Precio: 4.250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-hacksaw kasto 078-4a
idpxnemew HACKSAW KASTO 078-4A IDPXNEMEW
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 3.100 €
Ubicación: Land-the fully hydraulic porduktions quick hacksaw machine has a universal hydraulic for cutting thin - and thick-walled profiles and full materials without changing the saw blade with the uniform tooth spacing of 3 exclusive or individual or 4 teeth per inch. pre-stressed bar guide, closed oil hydraulic, triple swivel storage, separate coolant system, continuously adjustable, hydraulic cutting pressure, abhebebewegung and accelerated return stroke, standard equipped with stepless							
mitre institution. lifting the saw bar in rapid traverse.							
shuttle vise to the perfect use of the saw blade. longitudinal guidance with ground and hardened guide rails to transfer the cut pressure on the saw handle. 							
autaomatisch final shut-down. for features a push button control off and high speed of the saw bar manufacturer kasto metal bracket saw machine type metal hacksaw psb 210 u power: 1,6 kw
	stroke rates: 50/64/82/100/128/164 min
	schnittgeschw.: 11/13/17/22/26/36 / m/min
	universal hydraulic: standard saw feed round hydraulic cutting area: 210 mm
	flat cutting capacity: 210 x 180 mm
	mitre 0-45 â°
	material height: 500 mm
	weight: 490 kg.
	length/width: 1200 x 750 mm
	height: 850 mm
	blade dimensions: 350 x 30 x 2 mm
	year of construction: 1995 accessories.					coolant system â?¬3.100,00
 THE FULLY HYDRAULIC PORDUKTIONS QUICK HACKSAW MACHINE HAS A UNIVERSAL HYDRAULIC FOR CUTTING THIN - AND THICK-WALLED PROFILES AND FULL MATERIALS WITHOUT CHANGING THE SAW BLADE WITH THE UNIFORM TOOTH SPACING OF 3 EXCLUSIVE OR INDIVIDUAL OR 4 TEETH PER INCH. PRE-STRESSED BAR GUIDE, CLOSED OIL HYDRAULIC, TRIPLE SWIVEL STORAGE, SEPARATE COOLANT SYSTEM, CONTINUOUSLY ADJUSTABLE, HYDRAULIC CUTTING PRESSURE, ABHEBEBEWEGUNG AND ACCELERATED RETURN STROKE, STANDARD EQUIPPED WITH STEPLESS MITRE INSTITUTION. LIFTING THE SAW BAR IN RAPID TRAVERSE. SHUTTLE VISE TO THE PERFECT USE OF THE SAW BLADE. LONGITUDINAL GUIDANCE WITH GROUND AND HARDENED GUIDE RAILS TO TRANSFER THE CUT PRESSURE ON THE SAW HANDLE. AUTAOMATISCH FINAL SHUT-DOWN. FOR FEATURES A PUSH BUTTON CONTROL OFF AND HIGH SPEED OF THE SAW BAR MANUFACTURER KASTO METAL BRACKET SAW MACHINE TYPE METAL HACKSAW PSB 210 U POWER: 1,6 KW STROKE RATES: 50/64/82/100/128/164 MIN SCHNITTGESCHW.: 11/13/17/22/26/36 / M/MIN UNIVERSAL HYDRAULIC: STANDARD SAW FEED ROUND HYDRAULIC CUTTING AREA: 210 MM FLAT CUTTING CAPACITY: 210 X 180 MM MITRE 0-45 &ACIRC;&DEG; MATERIAL HEIGHT: 500 MM WEIGHT: 490 KG. LENGTH/WIDTH: 1200 X 750 MM HEIGHT: 850 MM BLADE DIMENSIONS: 350 X 30 X 2 MM YEAR OF CONSTRUCTION: 1995 ACCESSORIES. COOLANT SYSTEM &ACIRC;?&NOT;3.100,00
Vendedor: Maurath
Año de construcción: usado
Ubicación: Land-hacksaw kasto bsm 403 - 19-04-008
shipping time: immediately

number: 19-04-008

manufacturer: kasto
type: bsm 403

machine data
year of construction: approx. 1985
l x w x h: approx. 1700 x 800 x 1400 mm
weight: 600 kg

very good condition

technical data
blade dimensions: approx. 600 x 50 x 2.0 mm

cutting capacity: 90 degrees
about: approx. ã? 420 mm
square: approx. 320 x 320 mm
flat: approx. 420 x 320 mm

cutting capacity: 45 degrees
about: approx. 320 mm
square: approx. 240 x 240 mm
flat: approx. 320 x 240 mm

mitre cut: 0-45 degrees

stroke rate: approx. 37 / 64 & 109 stroke/min

power: approx. 2,2 kw

accessories
â?¢ adjustable cutting pressure

â?¢ stroke rate adjustable

â?¢ coolant system

â?¢ foot switch

other accessories on request
price and other specifications on request HACKSAW KASTO BSM 403 - 19-04-008 SHIPPING TIME: IMMEDIATELY NUMBER: 19-04-008 MANUFACTURER: KASTO TYPE: BSM 403 MACHINE DATA YEAR OF CONSTRUCTION: APPROX. 1985 L X W X H: APPROX. 1700 X 800 X 1400 MM WEIGHT: 600 KG VERY GOOD CONDITION TECHNICAL DATA BLADE DIMENSIONS: APPROX. 600 X 50 X 2.0 MM CUTTING CAPACITY: 90 DEGREES ABOUT: APPROX. &ATILDE;? 420 MM SQUARE: APPROX. 320 X 320 MM FLAT: APPROX. 420 X 320 MM CUTTING CAPACITY: 45 DEGREES ABOUT: APPROX. 320 MM SQUARE: APPROX. 240 X 240 MM FLAT: APPROX. 320 X 240 MM MITRE CUT: 0-45 DEGREES STROKE RATE: APPROX. 37 / 64 & 109 STROKE/MIN POWER: APPROX. 2,2 KW ACCESSORIES &ACIRC;?&CENT; ADJUSTABLE CUTTING PRESSURE &ACIRC;?&CENT; STROKE RATE ADJUSTABLE &ACIRC;?&CENT; COOLANT SYSTEM &ACIRC;?&CENT; FOOT SWITCH OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-hacksaw kasto hbs 2 - 19-04-009
shipping time: immediately

number: 19-04-009

manufacturer: kasto
type: hbs 2

machine data
year of construction: approx. 2014
l x w x h: approx. 1400 x 505 x 960 mm
weight: 180 kg

very good condition - like new

technical data
blade dimensions: approx. 450 x 40 x 2.0 mm

cutting capacity: 90 degrees
about: approx. ã? 250 mm
square: approx. 230 x 230 mm
flat: approx. 280 x 200 mm

cutting capacity: 45 degrees
about: approx. 180 mm
square: approx. 170 x 170 mm
flat: approx. 200 x 170 mm
flat: approx. 235 x 155 mm

mitre cut: 0-45 degrees

stroke rate: approx. 62 / 125 stroke/min

power: approx. 1.3 kw

accessories
â?¢ 14 piece saw blades (partly new)

â?¢ adjustable cutting pressure

â?¢ pendulum clamping vice

â?¢ coolant system

â?¢ automatic shut-off

other accessories on request
price and other specifications on request HACKSAW KASTO HBS 2 - 19-04-009 SHIPPING TIME: IMMEDIATELY NUMBER: 19-04-009 MANUFACTURER: KASTO TYPE: HBS 2 MACHINE DATA YEAR OF CONSTRUCTION: APPROX. 2014 L X W X H: APPROX. 1400 X 505 X 960 MM WEIGHT: 180 KG VERY GOOD CONDITION - LIKE NEW TECHNICAL DATA BLADE DIMENSIONS: APPROX. 450 X 40 X 2.0 MM CUTTING CAPACITY: 90 DEGREES ABOUT: APPROX. &ATILDE;? 250 MM SQUARE: APPROX. 230 X 230 MM FLAT: APPROX. 280 X 200 MM CUTTING CAPACITY: 45 DEGREES ABOUT: APPROX. 180 MM SQUARE: APPROX. 170 X 170 MM FLAT: APPROX. 200 X 170 MM FLAT: APPROX. 235 X 155 MM MITRE CUT: 0-45 DEGREES STROKE RATE: APPROX. 62 / 125 STROKE/MIN POWER: APPROX. 1.3 KW ACCESSORIES &ACIRC;?&CENT; 14 PIECE SAW BLADES (PARTLY NEW) &ACIRC;?&CENT; ADJUSTABLE CUTTING PRESSURE &ACIRC;?&CENT; PENDULUM CLAMPING VICE &ACIRC;?&CENT; COOLANT SYSTEM &ACIRC;?&CENT; AUTOMATIC SHUT-OFF OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-hacksaw kasto 250 mm  HACKSAW KASTO 250 MM
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 1.100 €
Ubicación: Land-
description

universal hacksaw of kasto brand suitable for the tool, jig and fixture construction, training and mold

cutting diameter: 360 mm
    leaf: 400mm

technical data

section diameter 360 mm
    sheet 400mm
    coolant yes
    connection 50 hz 3 x 380v
    mmotor 2,4 kw

DESCRIPTION UNIVERSAL HACKSAW OF KASTO BRAND SUITABLE FOR THE TOOL, JIG AND FIXTURE CONSTRUCTION, TRAINING AND MOLD CUTTING DIAMETER: 360 MM LEAF: 400MM TECHNICAL DATA SECTION DIAMETER 360 MM SHEET 400MM COOLANT YES CONNECTION 50 HZ 3 X 380V MMOTOR 2,4 KW
Vendedor: AWM GmbH
Año de construcción: usado
Ubicación: Land-maximum cutting diameter: 320 mm
autom. feed rate: 1-640 mm per stroke adjustable
number counter: 1-1000
blade size: 575 x 52 x 2.5 mm
total power consumption: approx. 2.5 kw / 380 v
machine weight: approx. 1200 kg

accessories / equipment:

adjustable material feed
number counter
mont. saw blade
coolant system

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the machine before making a purchase in advance under power. MAXIMUM CUTTING DIAMETER: 320 MM AUTOM. FEED RATE: 1-640 MM PER STROKE ADJUSTABLE NUMBER COUNTER: 1-1000 BLADE SIZE: 575 X 52 X 2.5 MM TOTAL POWER CONSUMPTION: APPROX. 2.5 KW / 380 V MACHINE WEIGHT: APPROX. 1200 KG ACCESSORIES / EQUIPMENT: ADJUSTABLE MATERIAL FEED NUMBER COUNTER MONT. SAW BLADE COOLANT SYSTEM ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE MACHINE BEFORE MAKING A PURCHASE IN ADVANCE UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-parallel lathe ramo type t36 et
between points 600 mm
maxi Ø on bench 360 mm
maxi Ø over saddle 180 mm
rotation from 31 to 1600 rpm
3-jaws chuck Ø 200 mm
threadings metric + witworth
tailstock cm4
auto advances longitudinal + transverse
lubricant pump
voltage 380 v
dimensions (l x w x h) 1700 x 1100 x 1500 mm
weight approx. 1 t

machine in our stock in france. PARALLEL LATHE RAMO TYPE T36 ET BETWEEN POINTS 600 MM MAXI Ø ON BENCH 360 MM MAXI Ø OVER SADDLE 180 MM ROTATION FROM 31 TO 1600 RPM 3-JAWS CHUCK Ø 200 MM THREADINGS METRIC + WITWORTH TAILSTOCK CM4 AUTO ADVANCES LONGITUDINAL + TRANSVERSE LUBRICANT PUMP VOLTAGE 380 V DIMENSIONS (L X W X H) 1700 X 1100 X 1500 MM WEIGHT APPROX. 1 T MACHINE IN OUR STOCK IN FRANCE.
Vendedor: Retec Machines S.A.S
Año de construcción: usado
Precio: 8.400 €
Ubicación: Land-bowl cutter / cutter mixer

ramon

as-30

facilities:

bowl: stainless steel, 30 litres
    2 bowl speeds: 12 & 24 u/min
    2 knives speeds: 1500 & 3000 rpm
    blade brake
    accessories:
    6 cutter head
    key to the solving of the cutter head
    technical data:
     5.15 kw, 400v / 50 hz
    16a cadwell plug
    approx. 360 kg
    overall dimensions with lid closed: h101 x b90 x t75 cm
    year of construction: 2012
    facilities:
    thermometer
    integrated control box
    sturdy construction to avoid the vibrations
    function tested / machine ready for use immediately!

see pictures original condition and accessories!

if you have questions, email or call.  BOWL CUTTER / CUTTER MIXER RAMON AS-30 FACILITIES: BOWL: STAINLESS STEEL, 30 LITRES 2 BOWL SPEEDS: 12 & 24 U/MIN 2 KNIVES SPEEDS: 1500 & 3000 RPM BLADE BRAKE ACCESSORIES: 6 CUTTER HEAD KEY TO THE SOLVING OF THE CUTTER HEAD TECHNICAL DATA: 5.15 KW, 400V / 50 HZ 16A CADWELL PLUG APPROX. 360 KG OVERALL DIMENSIONS WITH LID CLOSED: H101 X B90 X T75 CM YEAR OF CONSTRUCTION: 2012 FACILITIES: THERMOMETER INTEGRATED CONTROL BOX STURDY CONSTRUCTION TO AVOID THE VIBRATIONS FUNCTION TESTED / MACHINE READY FOR USE IMMEDIATELY! SEE PICTURES ORIGINAL CONDITION AND ACCESSORIES! IF YOU HAVE QUESTIONS, EMAIL OR CALL.
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Precio: 3.100 €
Ubicación: Land-wesetslindtner verleimen stand double-sided, 8 vertical low-,2 horizontal arms, tie distance 2500mmx2000mm WESETSLINDTNER VERLEIMEN STAND DOUBLE-SIDED, 8 VERTICAL LOW-,2 HORIZONTAL ARMS, TIE DISTANCE 2500MMX2000MM
Vendedor: Herr Olaf Flatscher
Año de construcción: usado
Precio: 4.957 €
Ubicación: Land-technical data stop station ms 3000: brand: elumatec

type: ms 3000

sturdy steel construction ideal for vertical installation suitable for lines smooth intermediate positions for ergonomic working height adjustment with pneumatic cylinder roller pad with steel rollers table top with plastic wear strips zwe i horizontally sliding profile release compressed air connection 4-technical data

3.110 mm long
    width 1,200 mm
    vertical height 2.050 mm
    height adjustment pneum.. 500 mm
    roll width 200 mm
    weight 330 kg
    load capacity 300 kg
    compressed air supply 7 bar
    air consumption approx. 35 l / min.

technical data glass press ve 3000:

brand: elumatec

type: ve 3000

stable steel construction
    fast, accurate windows, doors and element assembly
    accuracy through parallel clamping bar pressure
    glazing and function control
    on teaching of frame and wings
    stepless height adjustment
    two pneumatic foldable and moveable press bar
    easy handling due to foot switch
    compressed air connection 4 x

technical data

4,410 mm long
    width 1,180 mm
    height 2600 mm
    clamping width of 3,000 mm
    clamping width of min. 400 mm
    height 500 mm
    clamping bar height: 2,300 mm
    clamping bar width 120 mm
    lower roller width 200 mm
    weight 470 kg
    carrying capacity 200 kg
    compressed air supply 7 bar
    air consumption 35 l / min.

TECHNICAL DATA STOP STATION MS 3000: BRAND: ELUMATEC TYPE: MS 3000 STURDY STEEL CONSTRUCTION IDEAL FOR VERTICAL INSTALLATION SUITABLE FOR LINES SMOOTH INTERMEDIATE POSITIONS FOR ERGONOMIC WORKING HEIGHT ADJUSTMENT WITH PNEUMATIC CYLINDER ROLLER PAD WITH STEEL ROLLERS TABLE TOP WITH PLASTIC WEAR STRIPS ZWE I HORIZONTALLY SLIDING PROFILE RELEASE COMPRESSED AIR CONNECTION 4-TECHNICAL DATA 3.110 MM LONG WIDTH 1,200 MM VERTICAL HEIGHT 2.050 MM HEIGHT ADJUSTMENT PNEUM.. 500 MM ROLL WIDTH 200 MM WEIGHT 330 KG LOAD CAPACITY 300 KG COMPRESSED AIR SUPPLY 7 BAR AIR CONSUMPTION APPROX. 35 L / MIN. TECHNICAL DATA GLASS PRESS VE 3000: BRAND: ELUMATEC TYPE: VE 3000 STABLE STEEL CONSTRUCTION FAST, ACCURATE WINDOWS, DOORS AND ELEMENT ASSEMBLY ACCURACY THROUGH PARALLEL CLAMPING BAR PRESSURE GLAZING AND FUNCTION CONTROL ON TEACHING OF FRAME AND WINGS STEPLESS HEIGHT ADJUSTMENT TWO PNEUMATIC FOLDABLE AND MOVEABLE PRESS BAR EASY HANDLING DUE TO FOOT SWITCH COMPRESSED AIR CONNECTION 4 X TECHNICAL DATA 4,410 MM LONG WIDTH 1,180 MM HEIGHT 2600 MM CLAMPING WIDTH OF 3,000 MM CLAMPING WIDTH OF MIN. 400 MM HEIGHT 500 MM CLAMPING BAR HEIGHT: 2,300 MM CLAMPING BAR WIDTH 120 MM LOWER ROLLER WIDTH 200 MM WEIGHT 470 KG CARRYING CAPACITY 200 KG COMPRESSED AIR SUPPLY 7 BAR AIR CONSUMPTION 35 L / MIN.
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Ubicación: Land-multiple-spindle milling machine fritz werner ssf 3 - 07-99-001 shipping time: immediately number: 07-99-001 manufacturer: fritz werner type: ssf 3

machine data built: approx 1980 l x w x h: approx. 1900 x 1800 x 1800 mm weight: approx. 1200 kg

very good condition

machines for cutting dovetail guides specifications suitable including multiple spindles - milling procedures: x - axis: approx. 600 mm y - axis: approx. 200 mm z - axis: 500 mm tischaufspannï¬?ã¤che: approx. 740 x 220 mm spindle number: 3 piece speed - locker el: approx. 3000 rpm total power: approx. 7.5 kw feeds & express ducts: max in all 3 axes milling range (dovetail): approx. 400 mm (wide) range of 1 & 3 milling spindle: about 50-80 degrees elevation 1 & 3 milling spindle: approx. 80 mm height ung 2. milling spindle: approx. 50 mm accessories â?¢ left / right rotation â?¢ mechanical vise â?¢ 10 pieces-various milling head attachment â?¢ various milling head dies â?¢ work lamp accessories on request price and other specifications on request MULTIPLE-SPINDLE MILLING MACHINE FRITZ WERNER SSF 3 - 07-99-001 SHIPPING TIME: IMMEDIATELY NUMBER: 07-99-001 MANUFACTURER: FRITZ WERNER TYPE: SSF 3 MACHINE DATA BUILT: APPROX 1980 L X W X H: APPROX. 1900 X 1800 X 1800 MM WEIGHT: APPROX. 1200 KG VERY GOOD CONDITION MACHINES FOR CUTTING DOVETAIL GUIDES SPECIFICATIONS SUITABLE INCLUDING MULTIPLE SPINDLES - MILLING PROCEDURES: X - AXIS: APPROX. 600 MM Y - AXIS: APPROX. 200 MM Z - AXIS: 500 MM TISCHAUFSPANN&IUML;&NOT;?&ATILDE;&CURREN;CHE: APPROX. 740 X 220 MM SPINDLE NUMBER: 3 PIECE SPEED - LOCKER EL: APPROX. 3000 RPM TOTAL POWER: APPROX. 7.5 KW FEEDS & EXPRESS DUCTS: MAX IN ALL 3 AXES MILLING RANGE (DOVETAIL): APPROX. 400 MM (WIDE) RANGE OF 1 & 3 MILLING SPINDLE: ABOUT 50-80 DEGREES ELEVATION 1 & 3 MILLING SPINDLE: APPROX. 80 MM HEIGHT UNG 2. MILLING SPINDLE: APPROX. 50 MM ACCESSORIES &ACIRC;?&CENT; LEFT / RIGHT ROTATION &ACIRC;?&CENT; MECHANICAL VISE &ACIRC;?&CENT; 10 PIECES-VARIOUS MILLING HEAD ATTACHMENT &ACIRC;?&CENT; VARIOUS MILLING HEAD DIES &ACIRC;?&CENT; WORK LAMP ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-monforts stenter for woven fabric model montex 8f. year 1997

- impregnation padder

- 8 chambers, roller width 3300 mm

- horizontal pin and clip chain

- gas heated MONFORTS STENTER FOR WOVEN FABRIC MODEL MONTEX 8F. YEAR 1997 - IMPREGNATION PADDER - 8 CHAMBERS, ROLLER WIDTH 3300 MM - HORIZONTAL PIN AND CLIP CHAIN - GAS HEATED
Vendedor: Inautex
Año de construcción: usado
Precio: 990 €
Ubicación: Land-hydraulic frame press type rpv - genauigskeits frame press for highest performance, compression dimension: 3000 x 2000 mm, fully functional, four adjustable pressure bar, three horizontal, hydraulic power unit, power is vertical - 1,1 kw, the press for your age in the excellent condition HYDRAULIC FRAME PRESS TYPE RPV - GENAUIGSKEITS FRAME PRESS FOR HIGHEST PERFORMANCE, COMPRESSION DIMENSION: 3000 X 2000 MM, FULLY FUNCTIONAL, FOUR ADJUSTABLE PRESSURE BAR, THREE HORIZONTAL, HYDRAULIC POWER UNIT, POWER IS VERTICAL - 1,1 KW, THE PRESS FOR YOUR AGE IN THE EXCELLENT CONDITION
Vendedor: voelkel-hightech
Año de construcción: usado
Ubicación: Land-4500 w vodou chladená xenónová oblúková lampa
celková expozícia 2 188 cm2 (339 in2)
tft farebný 12 4500 W VODOU CHLADENá XENóNOVá OBLúKOVá LAMPA CELKOVá EXPOZíCIA 2 188 CM2 (339 IN2) TFT FAREBNý 12 "DOTYKOVý DISPLEJ OVLáDACIEHO PANELA ZOBRAZUJE VšETKY TESTOVACIE PARAMETRE PRIAME NASTAVENIE A OVLáDANIE TEPLOTY ?IERNEHO PANELU; NEIZOLOVANé (BPT) ALEBO IZOLOVANé (BST) PRIAME NASTAVENIE A REGULáCIA RELATíVNEJ VLHKOSTI PRIAME NASTAVENIE A RIADENIE TEPLOTY VZDUCHU V KOMORE VZORKY ZOBRAZENIE DIAGNOSTICKýCH SPRáV 14 VýROBNýCH PREDPROGRAMOVANýCH TESTOVACíCH METóD (WEATHER-OMETER); 6 VýROBNýCH PREDPROGRAMOVANýCH TESTOVACíCH METóD (FADE-OMETER) PRIESTOR PRE 12 VLASTNýCH PROGRAMOV; SCHOPNOS? SUB-CYKLU VIACJAZY?Né SCHOPNOSTI (ANGLI?TINA, FRANCúZšTINA, NEM?INA, šPANIEL?INA, JAPON?INA, ?íNšTINA, KóREJ?INA, TURE?TINA) STREAMOVANIE DáTOVýCH DáT CEZ ETHERNET ALEBO USB PORT. Sú?AS?OU BALENIA JE AJ USB DISK SMARTDAMPERTM NA ZNížENIE TESTOVACEJ VARIABILITY TEPLOTY A VLHKOSTI KOMORY A KOMPENZUJE ZMENY OKOLITýCH LABORATóRNYCH PODMIENOK SMARTLIGHT MONITORTM OVERí, ?I JE NAINšTALOVANá SPRáVNA SVETELNá KAPSULA K DISPOZíCII Sú KOMBINáCIE FILTROV, KTORé SP??AJú VšETKY BEžNé TESTOVACIE METóDY VZDUCHOVý FILTER NA NASáVANIE VZDUCHU CS-7 CHLADIACI SYSTéM XENóNOVEJ LAMPY OBRAZOVé OKNO PRE POSEDENIE VO DVERáCH UNIVERZáLNE ELEKTRICKé KONFIGURáCIE NA SPLNENIE MIESTNYCH POžIADAVIEK NA FREKVENCIU, NAPäTIE A ELEKTRICKé POžIADAVKY SP??A BEZPE?NOSTNé POžIADAVKY CE, UL, ISO EN A CSA AUTOMATICKé ODPO?íTAVANIE TESTOV NA ZáKLADE ?ASU ALEBO SáLAVéHO OžIARENIA SYSTéM ZVLH?OVANIA VIBRASONIC ™ K DISPOZíCII Sú DRžIAKY VZORIEK, KTORé VYHOVUJú MNOHýM TYPOM VZORIEK KALIBROVANá XENóNOVá REFEREN?Ná LAMPA INDIKáTOR ?ISTOTY VODY
Vendedor: BASTA
Año de construcción: usado
Ubicación: Land-rame bruckner for tissue to the flat, wide cylinders 2.000 mm. year 1999

entry with supercharging and box of vaporized
horizontal chain of forceps and needles (only installed clamps)
12 fields heated gas burners eclipse
exit j mollusk, inspection table with reels 2 car boot
kiln length: 3 x 12 = 36 m

the machine will be delivered without cloth or weft straightener RAME BRUCKNER FOR TISSUE TO THE FLAT, WIDE CYLINDERS 2.000 MM. YEAR 1999 ENTRY WITH SUPERCHARGING AND BOX OF VAPORIZED HORIZONTAL CHAIN OF FORCEPS AND NEEDLES (ONLY INSTALLED CLAMPS) 12 FIELDS HEATED GAS BURNERS ECLIPSE EXIT J MOLLUSK, INSPECTION TABLE WITH REELS 2 CAR BOOT KILN LENGTH: 3 X 12 = 36 M THE MACHINE WILL BE DELIVERED WITHOUT CLOTH OR WEFT STRAIGHTENER
Vendedor: Inautex
Año de construcción: usado
Precio: 3.100 €
Ubicación: Land-frame press hess economic

hydraulic
3600 x 2250 mm
l x w x h: 400 x 100 x 270 cm
weight approx. 1100 kg year 1987

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12        

 FRAME PRESS HESS ECONOMIC HYDRAULIC 3600 X 2250 MM L X W X H: 400 X 100 X 270 CM WEIGHT APPROX. 1100 KG YEAR 1987 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-pneumatic clamp stromab model sta2500:
-useful working sizes 2500x1200mm
-overall dimension mt 2,7 x 1,8 x h=2,1
-weight kg 600
machine at ce mark PNEUMATIC CLAMP STROMAB MODEL STA2500: -USEFUL WORKING SIZES 2500X1200MM -OVERALL DIMENSION MT 2,7 X 1,8 X H=2,1 -WEIGHT KG 600 MACHINE AT CE MARK
Vendedor: Baldin SRL
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-guidance and lathe ramo a 42 bearing no 1105-02280 category control and lathe make ramo type a 42 year 1989 state second-hand machine control conventional storage france country of origin france delivery immediately  
cargo base stock haguenau

technical details of turning diameter over bed 420 mm turning diameter over support 210 mm turning length 1000 mm centre height 120 mm spindle bore 80 mm spindle speeds 25-2000 rpm total power consumption approx. 15 kw machine weight approx. 1.5 t description rapid traverse for l ã¤ngs and plan.
 accessories: coolant system with chip tray in the machine bed, foot brake, quick change toolpost, three-jaw-chuck 250 mm dia.
 , operating instructions. 
 GUIDANCE AND LATHE RAMO A 42 BEARING NO 1105-02280 CATEGORY CONTROL AND LATHE MAKE RAMO TYPE A 42 YEAR 1989 STATE SECOND-HAND MACHINE CONTROL CONVENTIONAL STORAGE FRANCE COUNTRY OF ORIGIN FRANCE DELIVERY IMMEDIATELY CARGO BASE STOCK HAGUENAU TECHNICAL DETAILS OF TURNING DIAMETER OVER BED 420 MM TURNING DIAMETER OVER SUPPORT 210 MM TURNING LENGTH 1000 MM CENTRE HEIGHT 120 MM SPINDLE BORE 80 MM SPINDLE SPEEDS 25-2000 RPM TOTAL POWER CONSUMPTION APPROX. 15 KW MACHINE WEIGHT APPROX. 1.5 T DESCRIPTION RAPID TRAVERSE FOR L &ATILDE;&CURREN;NGS AND PLAN. ACCESSORIES: COOLANT SYSTEM WITH CHIP TRAY IN THE MACHINE BED, FOOT BRAKE, QUICK CHANGE TOOLPOST, THREE-JAW-CHUCK 250 MM DIA. , OPERATING INSTRUCTIONS.
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-lokalizacja 	

gorzów wlkp.
warunki dostawy 	

odbiÓr w?asny
koszt dostawy 	

pokrywa klient
typ uruchomienia 	

do uzgodnienia
opis 	
uwagi 	

dane techniczne ?rednica kó? ta?mowych mm 400
prze?wit poziomy mm 1250
prze?wit pionowy mm 1300
silnik g?ówny kw 1,5 - 3,5 - wg. zamówienia
silnik posuwu sto?ów kw 0,55
silnik posuwu przyk?adnic kw 0,18
silnik przesuwu rolki prowadz?cej kw 0,12
przyk?adnica szt. 2
szeroko?? sto?u roboczego mm 1500
d?ugo?? sto?u roboczego mm 2500
d?ugo?? ta?my tnacej mm 8450
szeroko?? ta?my tn?cej mm 15
grubo?? ta?my tn?cej mm 0,5
d?ugo?? maszyny m 3,8 (4,8)
szeroko?? maszyny m 3,15
wysoko?? maszyny m 2,45 (3,4)
waga kg 2100

- solidna i wytrzyma?a konstrukcja

- pi?a ta?mowa dwustronnie z?bkowana

- dwustronne ci?cie

- programator - umo?liwia zaprogramowanie ci?cia dla ca?ego bloku

- pulpit dotykowy - praca w automacie  LOKALIZACJA GORZóW WLKP. WARUNKI DOSTAWY ODBIÓR W?ASNY KOSZT DOSTAWY POKRYWA KLIENT TYP URUCHOMIENIA DO UZGODNIENIA OPIS UWAGI DANE TECHNICZNE ?REDNICA Kó? TA?MOWYCH MM 400 PRZE?WIT POZIOMY MM 1250 PRZE?WIT PIONOWY MM 1300 SILNIK G?óWNY KW 1,5 - 3,5 - WG. ZAMóWIENIA SILNIK POSUWU STO?óW KW 0,55 SILNIK POSUWU PRZYK?ADNIC KW 0,18 SILNIK PRZESUWU ROLKI PROWADZ?CEJ KW 0,12 PRZYK?ADNICA SZT. 2 SZEROKO?? STO?U ROBOCZEGO MM 1500 D?UGO?? STO?U ROBOCZEGO MM 2500 D?UGO?? TA?MY TNACEJ MM 8450 SZEROKO?? TA?MY TN?CEJ MM 15 GRUBO?? TA?MY TN?CEJ MM 0,5 D?UGO?? MASZYNY M 3,8 (4,8) SZEROKO?? MASZYNY M 3,15 WYSOKO?? MASZYNY M 2,45 (3,4) WAGA KG 2100 - SOLIDNA I WYTRZYMA?A KONSTRUKCJA - PI?A TA?MOWA DWUSTRONNIE Z?BKOWANA - DWUSTRONNE CI?CIE - PROGRAMATOR - UMO?LIWIA ZAPROGRAMOWANIE CI?CIA DLA CA?EGO BLOKU - PULPIT DOTYKOWY - PRACA W AUTOMACIE
Vendedor: PPHU Lignum Przemysław Kretowicz
Año de construcción: usado
Ubicación: Land-technical data:
work area at 90 â°: round ã? 195 mm square 180 x 180 mm working area at 45 â°: round ã? 110 mm square flat 110 x 110 mm 220 x 160 mm engine power 0.75 kw blade 400 x 32 x 1.6
ser good condition, unused TECHNICAL DATA: WORK AREA AT 90 &ACIRC;&DEG;: ROUND &ATILDE;? 195 MM SQUARE 180 X 180 MM WORKING AREA AT 45 &ACIRC;&DEG;: ROUND &ATILDE;? 110 MM SQUARE FLAT 110 X 110 MM 220 X 160 MM ENGINE POWER 0.75 KW BLADE 400 X 32 X 1.6 SER GOOD CONDITION, UNUSED
Vendedor: Dematech s.r.o
Año de construcción: usado
Ubicación: Land-make: nakamuramodel: tw 20year: 1988condition: usedmachine type: lathe location of machine: bulgaria control: fanuc ot swarf conveyor? yes c axis? yes documentation / manuals included? yes is tooling / spares included? yes is the equipment viewable under power? yesmachine details2x spindles, 2x 12-posts turrets, 1x c-axis, 3x live tools, nakamura-tome (fanuc ot) controller interface for barfeeder     MAKE: NAKAMURAMODEL: TW 20YEAR: 1988CONDITION: USEDMACHINE TYPE: LATHE LOCATION OF MACHINE: BULGARIA CONTROL: FANUC OT SWARF CONVEYOR? YES C AXIS? YES DOCUMENTATION / MANUALS INCLUDED? YES IS TOOLING / SPARES INCLUDED? YES IS THE EQUIPMENT VIEWABLE UNDER POWER? YESMACHINE DETAILS2X SPINDLES, 2X 12-POSTS TURRETS, 1X C-AXIS, 3X LIVE TOOLS, NAKAMURA-TOME (FANUC OT) CONTROLLER INTERFACE FOR BARFEEDER
Vendedor: CNC Management Ltd
Año de construcción: usado
Precio: 4.900 €
Ubicación: Land-the fully hydraulic porduktions quick hacksaw machine has a universal hydraulic for cutting thin - and thick-walled profiles and full materials without changing the saw blade with the uniform tooth spacing of 3 exclusive or individual or 4 teeth per inch. pre-stressed bar guide, closed oil hydraulic, triple swivel storage, separate coolant system, continuously adjustable, hydraulic cutting pressure, abhebebewegung and accelerated return stroke, standard equipped with automatic						
slide of material for cutting in automatic mode.						
shuttle vise to the perfect use of the saw blade. longitudinal guidance with ground and hardened guide rails to transfer the cut pressure on the saw handle. 						
automatic shut-off. push button operation for all functions. 						
						
	technical data: band saws kasto bandsaw machines machine type psb 220 au technical data cutting capacity 220 mm
	power saw gear.				3 kw
	power auxiliary units 4 kw
	an average - speed 11-14-18-22-28-36 m / min
	saw feed hydraulic stepless adjustable band saw blade dimensions 400 x 36 x 2 mm
	 feed length 750 mm
	material support.				700 mm
	dimensions of the machine length/width 2000-1630 mm
	height 1450 mm
	weight of machine 840 kg
						
	coolant system accessories	
						
 THE FULLY HYDRAULIC PORDUKTIONS QUICK HACKSAW MACHINE HAS A UNIVERSAL HYDRAULIC FOR CUTTING THIN - AND THICK-WALLED PROFILES AND FULL MATERIALS WITHOUT CHANGING THE SAW BLADE WITH THE UNIFORM TOOTH SPACING OF 3 EXCLUSIVE OR INDIVIDUAL OR 4 TEETH PER INCH. PRE-STRESSED BAR GUIDE, CLOSED OIL HYDRAULIC, TRIPLE SWIVEL STORAGE, SEPARATE COOLANT SYSTEM, CONTINUOUSLY ADJUSTABLE, HYDRAULIC CUTTING PRESSURE, ABHEBEBEWEGUNG AND ACCELERATED RETURN STROKE, STANDARD EQUIPPED WITH AUTOMATIC SLIDE OF MATERIAL FOR CUTTING IN AUTOMATIC MODE. SHUTTLE VISE TO THE PERFECT USE OF THE SAW BLADE. LONGITUDINAL GUIDANCE WITH GROUND AND HARDENED GUIDE RAILS TO TRANSFER THE CUT PRESSURE ON THE SAW HANDLE. AUTOMATIC SHUT-OFF. PUSH BUTTON OPERATION FOR ALL FUNCTIONS. TECHNICAL DATA: BAND SAWS KASTO BANDSAW MACHINES MACHINE TYPE PSB 220 AU TECHNICAL DATA CUTTING CAPACITY 220 MM POWER SAW GEAR. 3 KW POWER AUXILIARY UNITS 4 KW AN AVERAGE - SPEED 11-14-18-22-28-36 M / MIN SAW FEED HYDRAULIC STEPLESS ADJUSTABLE BAND SAW BLADE DIMENSIONS 400 X 36 X 2 MM FEED LENGTH 750 MM MATERIAL SUPPORT. 700 MM DIMENSIONS OF THE MACHINE LENGTH/WIDTH 2000-1630 MM HEIGHT 1450 MM WEIGHT OF MACHINE 840 KG COOLANT SYSTEM ACCESSORIES
Vendedor: Maurath
Año de construcción: usado
Precio: 850 €
Ubicación: Land-hacksaw is in very good condition was superseded in general.
type. hbs 250/280
serial number 1132 102 193
year of manufacture 1995 180 kg
400v 50 hz 1,1 kw 16,0 a
is sold as used.
no guarantee HACKSAW IS IN VERY GOOD CONDITION WAS SUPERSEDED IN GENERAL. TYPE. HBS 250/280 SERIAL NUMBER 1132 102 193 YEAR OF MANUFACTURE 1995 180 KG 400V 50 HZ 1,1 KW 16,0 A IS SOLD AS USED. NO GUARANTEE
Vendedor: JES Maschinenservice GmbH
Año de construcción: usado
Precio: 650 €
Ubicación: Land-technical data:

-manufacturer: kasto
-bj. approx. 1980 (estimated)
saw blade 370 mm
-with coolant pump (not connected not tested)
mitre cut possible
weight approx. 300kg
-2 geschwndigkeitsstufen
-16a power

TECHNICAL DATA: -MANUFACTURER: KASTO -BJ. APPROX. 1980 (ESTIMATED) SAW BLADE 370 MM -WITH COOLANT PUMP (NOT CONNECTED NOT TESTED) MITRE CUT POSSIBLE WEIGHT APPROX. 300KG -2 GESCHWNDIGKEITSSTUFEN -16A POWER
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Ubicación: Land-hacksaw electr. fabr. plaintiff, blade length 400 mm
with hydr. lowering
   HACKSAW ELECTR. FABR. PLAINTIFF, BLADE LENGTH 400 MM WITH HYDR. LOWERING
Vendedor: Herr Kurt Hinst
Año de construcción: usado
Ubicación: Land-clamping surface of 8000 x 2800;
automatic double table coupling;
table load 2 x 75,000 kg or coupled 150.000 kg;
milling length 8,000 at mk ã¸315;
clearance rack 3,100;
road milling slide 1,000;
way cross 2,500;
bndxkx83
iso spindle head 60 din2079 /.
adapter iso din69871 50;
internal cooling;
attachment storage;
3 angle heads.
control siemens of 8mc with plc s5;
various control spare parts;
milling motor 75kw; 380v 50 hz. CLAMPING SURFACE OF 8000 X 2800; AUTOMATIC DOUBLE TABLE COUPLING; TABLE LOAD 2 X 75,000 KG OR COUPLED 150.000 KG; MILLING LENGTH 8,000 AT MK &ATILDE;&CEDIL;315; CLEARANCE RACK 3,100; ROAD MILLING SLIDE 1,000; WAY CROSS 2,500; BNDXKX83 ISO SPINDLE HEAD 60 DIN2079 /. ADAPTER ISO DIN69871 50; INTERNAL COOLING; ATTACHMENT STORAGE; 3 ANGLE HEADS. CONTROL SIEMENS OF 8MC WITH PLC S5; VARIOUS CONTROL SPARE PARTS; MILLING MOTOR 75KW; 380V 50 HZ.
Vendedor: IKTHA-GmbH
Año de construcción: usado
Ubicación: Land-blade length 1000 mm
cutting area: 565 x 565 mm
dimensions machine (length x width x height): 2500 x 1400 x 2200 mm
(height 2200 mm in clearing condition)
weight / weight: 2.6 to
 BLADE LENGTH 1000 MM CUTTING AREA: 565 X 565 MM DIMENSIONS MACHINE (LENGTH X WIDTH X HEIGHT): 2500 X 1400 X 2200 MM (HEIGHT 2200 MM IN CLEARING CONDITION) WEIGHT / WEIGHT: 2.6 TO
Vendedor: mercator Maschinen GmbH
Año de construcción: usado
Ubicación: Land-84t
470 kw
46,7 m

diesel engine
model caterpillar c15 tier iii
output 354 kw/481 hp bei 1800 min-1 oder

?optional:
?model caterpillar c18 tier iii
output 470 kw/639 hp bei 1800 min-1 oder
direct injection, turbo charged, intercooler, reduced emission
cooling water cooled
air filter dry air filter with precleaner, automatic dust discharge, main and safety element, pollution indicator
fuel tank 850 l
electric system 24v
electric installation simple and very clear design
batteries 2 x 150 ah, main switch

price on request 84T 470 KW 46,7 M DIESEL ENGINE MODEL CATERPILLAR C15 TIER III OUTPUT 354 KW/481 HP BEI 1800 MIN-1 ODER ?OPTIONAL: ?MODEL CATERPILLAR C18 TIER III OUTPUT 470 KW/639 HP BEI 1800 MIN-1 ODER DIRECT INJECTION, TURBO CHARGED, INTERCOOLER, REDUCED EMISSION COOLING WATER COOLED AIR FILTER DRY AIR FILTER WITH PRECLEANER, AUTOMATIC DUST DISCHARGE, MAIN AND SAFETY ELEMENT, POLLUTION INDICATOR FUEL TANK 850 L ELECTRIC SYSTEM 24V ELECTRIC INSTALLATION SIMPLE AND VERY CLEAR DESIGN BATTERIES 2 X 150 AH, MAIN SWITCH PRICE ON REQUEST
Vendedor: AMP-Energy
Año de construcción: usado
Precio: 95.000 €
Ubicación: Land-ingersoll bohle cnc portal milling machine

type: s1500/t1 mastercenter
control: fidia m20 (2.5 surfcam cad/cam software)
built in 1992

technical data:

procedures:

x axis: 4000 mm
y-axis: 1950 mm
z-axis: 900 mm

table size:
x-axis: 3000 mm
y-axis: 1500 mm
z-axis: 900 mm

table load: up to 10 tons
rapid traverse x/y: 15000 mm / min.
rapid z: 10000 mm / min.

main dimensions:

length: 9050 mm
width: 7150 mm
height: 6325 mm weight: 55 t

the new price was approximately 2,000,000 euros. 

machine is fully functional. machine is in good condition.
we love to hear from you. INGERSOLL BOHLE CNC PORTAL MILLING MACHINE TYPE: S1500/T1 MASTERCENTER CONTROL: FIDIA M20 (2.5 SURFCAM CAD/CAM SOFTWARE) BUILT IN 1992 TECHNICAL DATA: PROCEDURES: X AXIS: 4000 MM Y-AXIS: 1950 MM Z-AXIS: 900 MM TABLE SIZE: X-AXIS: 3000 MM Y-AXIS: 1500 MM Z-AXIS: 900 MM TABLE LOAD: UP TO 10 TONS RAPID TRAVERSE X/Y: 15000 MM / MIN. RAPID Z: 10000 MM / MIN. MAIN DIMENSIONS: LENGTH: 9050 MM WIDTH: 7150 MM HEIGHT: 6325 MM WEIGHT: 55 T THE NEW PRICE WAS APPROXIMATELY 2,000,000 EUROS. MACHINE IS FULLY FUNCTIONAL. MACHINE IS IN GOOD CONDITION. WE LOVE TO HEAR FROM YOU.
Vendedor: W&T EFRA
Año de construcción: usado
Precio: 470 €
Ubicación: Land-hacksaw bgu bks 400
limit switch, mitre cutting device

blade length 400 mm
cutting length 250 mm
cutting height 200 mm
motor 380 v / 0.25 kw
weight approx. 115 kg

with trolley HACKSAW BGU BKS 400 LIMIT SWITCH, MITRE CUTTING DEVICE BLADE LENGTH 400 MM CUTTING LENGTH 250 MM CUTTING HEIGHT 200 MM MOTOR 380 V / 0.25 KW WEIGHT APPROX. 115 KG WITH TROLLEY
Vendedor: Jürgen Erdmann
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-working length. max: 2330mm
working length. min: 100 mm
working height max: 1560 mm
working height min: 920 mm
6 cylinders (4 from the top and 2 from the side): 6 pcs.
made in denmark
pressure regulator.
transport dimensions: 2960x2160x950 mm
weight: 600 kg
 WORKING LENGTH. MAX: 2330MM WORKING LENGTH. MIN: 100 MM WORKING HEIGHT MAX: 1560 MM WORKING HEIGHT MIN: 920 MM 6 CYLINDERS (4 FROM THE TOP AND 2 FROM THE SIDE): 6 PCS. MADE IN DENMARK PRESSURE REGULATOR. TRANSPORT DIMENSIONS: 2960X2160X950 MM WEIGHT: 600 KG
Vendedor: MEDIENOS STAKLES, UAB
Año de construcción: usado
Ubicación: Land-cutting capacity at 90 â° round: 210 mm cutting capacity at 90 â° flat: 240 x 190 mm cutting capacity in mitre at 45â°: 150 mm blade dimensions: 400 x 30 x 1.5 mm stroke speed: 62 / 125 rpm elect. supply: 380 v, 0.8 kw space: 1200 x 500 x 1120 mm weight: 170 kg 
 CUTTING CAPACITY AT 90 &ACIRC;&DEG; ROUND: 210 MM CUTTING CAPACITY AT 90 &ACIRC;&DEG; FLAT: 240 X 190 MM CUTTING CAPACITY IN MITRE AT 45&ACIRC;&DEG;: 150 MM BLADE DIMENSIONS: 400 X 30 X 1.5 MM STROKE SPEED: 62 / 125 RPM ELECT. SUPPLY: 380 V, 0.8 KW SPACE: 1200 X 500 X 1120 MM WEIGHT: 170 KG
Vendedor: Kurt Steiger Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-frame press
fabr.maweg
type euro-uni
bj. 1996
3500 x 2200 mm
hydraulic FRAME PRESS FABR.MAWEG TYPE EURO-UNI BJ. 1996 3500 X 2200 MM HYDRAULIC
Vendedor: WMB Werkzeug & Maschinen Börse
Año de construcción: usado
Ubicación: Land-little used paper roll clamp, top condition
bolzoni auramo manufacturer
model ar 37 rh 25 e
capacity 2000 kg / 1250 mm
rotating range 180 â°
rollenbreich 630-2500 mm
according to iso 2328: 3a
weight 1240 kg

interest and other information 0171 1742 535 LITTLE USED PAPER ROLL CLAMP, TOP CONDITION BOLZONI AURAMO MANUFACTURER MODEL AR 37 RH 25 E CAPACITY 2000 KG / 1250 MM ROTATING RANGE 180 &ACIRC;&DEG; ROLLENBREICH 630-2500 MM ACCORDING TO ISO 2328: 3A WEIGHT 1240 KG INTEREST AND OTHER INFORMATION 0171 1742 535
Vendedor: Transfer Industriemontage
Año de construcción: usado
Ubicación: Land-blade 400 mm BLADE 400 MM
Vendedor: HORST WOLFF Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-article number: ma1019
manufacturer: veb
type: s16
year of construction: 1962
machine number: 6422
length [mm]: 1000
width [mm]: 600
height [mm]: 800
weight [kg]: approximately 200
power supply: 380v
blade length: 350 mm
cutting area: 200 x 170 mm
accessories: cutting pressure adjustable / adjustable feed ARTICLE NUMBER: MA1019 MANUFACTURER: VEB TYPE: S16 YEAR OF CONSTRUCTION: 1962 MACHINE NUMBER: 6422 LENGTH [MM]: 1000 WIDTH [MM]: 600 HEIGHT [MM]: 800 WEIGHT [KG]: APPROXIMATELY 200 POWER SUPPLY: 380V BLADE LENGTH: 350 MM CUTTING AREA: 200 X 170 MM ACCESSORIES: CUTTING PRESSURE ADJUSTABLE / ADJUSTABLE FEED
Vendedor: Ulrich Müller Maschinenhandel
Año de construcción: usado
Precio: 3.500 €
Ubicación: Land-electro-hydraulic high performance quick sawing machine kasto ebs 320au
cutting capacity round 320 mm viekant 320 x 320 mm
blade size: 575 x 52 x 2.5 mm ELECTRO-HYDRAULIC HIGH PERFORMANCE QUICK SAWING MACHINE KASTO EBS 320AU CUTTING CAPACITY ROUND 320 MM VIEKANT 320 X 320 MM BLADE SIZE: 575 X 52 X 2.5 MM
Vendedor: ALSCO MACHINES-OUTILS
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more RAMO types: