549 ofertas

Año de construcción: usado
Precio: 2.000.000 €
Ubicación: Land-complete late model power generation plant 

for immediate sale

plant consists of (4) identical 1997 6.5mw generator sets using wartsila vasa 18v32 ln diesel engines as prime movers driving abb hsg 900xs8 type generators generating 26mw total electrical power

including but not limited to the following systems: electric, fuel, lubricating oil, starting compressed air, control air, cooling water, charge air & exhaust gas, flew gas washing, steam, fire alarm & fire-fighting systems

station nominal output: 26 mw

generator nominal output: 8,125 kva 

generator voltage: 11kv+- 5%

frequency: 50 hz

auxiliary voltage: 415 v ac, 110 v dc

fuel type: heavy fuel oil (hfo)/diesel

manufactured 1997; installed and under power 1998

total current operational hours: 59,000+/-
	
in-plant, under power




 COMPLETE LATE MODEL POWER GENERATION PLANT FOR IMMEDIATE SALE PLANT CONSISTS OF (4) IDENTICAL 1997 6.5MW GENERATOR SETS USING WARTSILA VASA 18V32 LN DIESEL ENGINES AS PRIME MOVERS DRIVING ABB HSG 900XS8 TYPE GENERATORS GENERATING 26MW TOTAL ELECTRICAL POWER INCLUDING BUT NOT LIMITED TO THE FOLLOWING SYSTEMS: ELECTRIC, FUEL, LUBRICATING OIL, STARTING COMPRESSED AIR, CONTROL AIR, COOLING WATER, CHARGE AIR & EXHAUST GAS, FLEW GAS WASHING, STEAM, FIRE ALARM & FIRE-FIGHTING SYSTEMS STATION NOMINAL OUTPUT: 26 MW GENERATOR NOMINAL OUTPUT: 8,125 KVA GENERATOR VOLTAGE: 11KV+- 5% FREQUENCY: 50 HZ AUXILIARY VOLTAGE: 415 V AC, 110 V DC FUEL TYPE: HEAVY FUEL OIL (HFO)/DIESEL MANUFACTURED 1997; INSTALLED AND UNDER POWER 1998 TOTAL CURRENT OPERATIONAL HOURS: 59,000+/- IN-PLANT, UNDER POWER
Vendedor: Meco ltd.
Año de construcción: usado
Precio: 9.900 €
Ubicación: Land-; power [ps]: 475; gross weight [kg]: 18000; engine: iveco; accessories: generator 500kva with hot water boiler, , mhkw systems., , manufacturer engine: iveco, typ engine: mtd, cnm, 350, manufacturer generator: avk, typ generator: dsg52m1.4, year: 1994, fuel: diesel, serial number engine: 000173, serial number generator: 66162 ; POWER [PS]: 475; GROSS WEIGHT [KG]: 18000; ENGINE: IVECO; ACCESSORIES: GENERATOR 500KVA WITH HOT WATER BOILER, , MHKW SYSTEMS., , MANUFACTURER ENGINE: IVECO, TYP ENGINE: MTD, CNM, 350, MANUFACTURER GENERATOR: AVK, TYP GENERATOR: DSG52M1.4, YEAR: 1994, FUEL: DIESEL, SERIAL NUMBER ENGINE: 000173, SERIAL NUMBER GENERATOR: 66162
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 225.000 €
Ubicación: Land-autom. shelf stock or akl, 7.584 shelf plots, 250 kg load capacity, tablarmaã?e 1.230 mm x 620 mm x 150 mm / 250 mm - used -:
 
price from site: â?¬225.000.-(net) plus montages etc.!
 
 
2-g shelf warehouse with just deep storage and conveyor systems for the connection of 2 jobs
 
manufacturer: tgw, a-4600 wels
type: shelf storage
year of construction / operation: 07.2007
 description:
â·         length of the streets: ca 51m
â·         height of the shelves: ca 9, 3 m
â·         sprinkler system: no
 stacker cranes
o number: 2
o type: stratus, lifting: spectra
 rack system
o number shelf location: 7.584
specialist load: 250 kg
o shelves:
⧠number of shelves: 5.280 pcs., galvanized steel (2mmm), smooth ground on 2 opposite sides with bar code tags
⧠dimensions: 1.230mm x 620mm x 150mm / 250mm
⧠sektorierung of the shelves possible
â·         conveyor: 1 cross reverse thrust car of the two streets and two jobs connects
â·         number of jobs: 2 - concurrent use of paging possible /
â·         system performance:
o rack serving unit: based on 76 and paging / h in the double play
 condition: good
available: from approximately april 2020!
location: austria
 
more photos on request! AUTOM. SHELF STOCK OR AKL, 7.584 SHELF PLOTS, 250 KG LOAD CAPACITY, TABLARMAÃ?E 1.230 MM X 620 MM X 150 MM / 250 MM - USED -: PRICE FROM SITE: Â?¬225.000.-(NET) PLUS MONTAGES ETC.! 2-G SHELF WAREHOUSE WITH JUST DEEP STORAGE AND CONVEYOR SYSTEMS FOR THE CONNECTION OF 2 JOBS MANUFACTURER: TGW, A-4600 WELS TYPE: SHELF STORAGE YEAR OF CONSTRUCTION / OPERATION: 07.2007 DESCRIPTION: · LENGTH OF THE STREETS: CA 51M · HEIGHT OF THE SHELVES: CA 9, 3 M · SPRINKLER SYSTEM: NO STACKER CRANES O NUMBER: 2 O TYPE: STRATUS, LIFTING: SPECTRA RACK SYSTEM O NUMBER SHELF LOCATION: 7.584 SPECIALIST LOAD: 250 KG O SHELVES: § NUMBER OF SHELVES: 5.280 PCS., GALVANIZED STEEL (2MMM), SMOOTH GROUND ON 2 OPPOSITE SIDES WITH BAR CODE TAGS § DIMENSIONS: 1.230MM X 620MM X 150MM / 250MM § SEKTORIERUNG OF THE SHELVES POSSIBLE · CONVEYOR: 1 CROSS REVERSE THRUST CAR OF THE TWO STREETS AND TWO JOBS CONNECTS · NUMBER OF JOBS: 2 - CONCURRENT USE OF PAGING POSSIBLE / · SYSTEM PERFORMANCE: O RACK SERVING UNIT: BASED ON 76 AND PAGING / H IN THE DOUBLE PLAY CONDITION: GOOD AVAILABLE: FROM APPROXIMATELY APRIL 2020! LOCATION: AUSTRIA MORE PHOTOS ON REQUEST!
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-volume scaling, cap. max. 50 cycl/min.,(estimation)\r\nvolume scaling between 450 - 1350 ccm, (depends on the product)\r\ndepositing nozzles changeable,\r\ndiameter of the nozzle approx. 24 mm, hopper approx. 60 l\r\nmade from stainless steel, machine moveable\r\n VOLUME SCALING, CAP. MAX. 50 CYCL/MIN.,(ESTIMATION)\R\NVOLUME SCALING BETWEEN 450 - 1350 CCM, (DEPENDS ON THE PRODUCT)\R\NDEPOSITING NOZZLES CHANGEABLE,\R\NDIAMETER OF THE NOZZLE APPROX. 24 MM, HOPPER APPROX. 60 L\R\NMADE FROM STAINLESS STEEL, MACHINE MOVEABLE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-kodak magnus 800 quantum f-speed
year 2007
with autoloader
with plateprocessor
with punch
with rip prinergy evo
price: on request KODAK MAGNUS 800 QUANTUM F-SPEED YEAR 2007 WITH AUTOLOADER WITH PLATEPROCESSOR WITH PUNCH WITH RIP PRINERGY EVO PRICE: ON REQUEST
Vendedor: USED Machines
Año de construcción: usado
Ubicación: Land-turning diameter: 230 mm<br/>turning length: 170 mm<br/>control: mazatrol fusion 640 m <br/>spindle passage: 51 mm<br/>spindle turning speed range: 6000 u/min<br/>spindle motor: 7,5 / 11 kw<br/>max. torque on the spindle: 162 <br/>no. of tools in turret 1: 12 vdi 40<br/>no. of tools in turret 2: 12 vdi 40<br/>number of driven tools in turret: 12 + 12 vdi 40<br/>spindel speed of driven tools: 4500 u/min<br/>drive milling spindle: 3,7 kw<br/>rapid traverse: 30/33 m/min<br/>weight of the machine ca.: 6,4 t<br/>dimensions: 5,0 x 1,65 x 2,1 m<br/>cnc- lathe with two spindles, driven tools and gantry loader.<br/><br/>- 3-jaw-chuck Ø 160 mm (mainspindle)<br/>- 3-jaw-chuck Ø 160 mm (subspindle)<br/>- gantry -loader gl 75 f with material drawers<br/>- double arm gripper<br/>- chip conveyor<br/>- 2 x tool measurement systems<br/>- automatic workpiece transfer<br/>- left spindle new bearings<br/><br/><br/><br/><br/> TURNING DIAMETER: 230 MM
TURNING LENGTH: 170 MM
CONTROL: MAZATROL FUSION 640 M
SPINDLE PASSAGE: 51 MM
SPINDLE TURNING SPEED RANGE: 6000 U/MIN
SPINDLE MOTOR: 7,5 / 11 KW
MAX. TORQUE ON THE SPINDLE: 162
NO. OF TOOLS IN TURRET 1: 12 VDI 40
NO. OF TOOLS IN TURRET 2: 12 VDI 40
NUMBER OF DRIVEN TOOLS IN TURRET: 12 + 12 VDI 40
SPINDEL SPEED OF DRIVEN TOOLS: 4500 U/MIN
DRIVE MILLING SPINDLE: 3,7 KW
RAPID TRAVERSE: 30/33 M/MIN
WEIGHT OF THE MACHINE CA.: 6,4 T
DIMENSIONS: 5,0 X 1,65 X 2,1 M
CNC- LATHE WITH TWO SPINDLES, DRIVEN TOOLS AND GANTRY LOADER.

- 3-JAW-CHUCK Ø 160 MM (MAINSPINDLE)
- 3-JAW-CHUCK Ø 160 MM (SUBSPINDLE)
- GANTRY -LOADER GL 75 F WITH MATERIAL DRAWERS
- DOUBLE ARM GRIPPER
- CHIP CONVEYOR
- 2 X TOOL MEASUREMENT SYSTEMS
- AUTOMATIC WORKPIECE TRANSFER
- LEFT SPINDLE NEW BEARINGS




Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-cnc lathe spu20cnc
manufacturer kovosvit, sezimovo ã?stã­
1995 go 2004
control systems sinumeric 810 t (the system was already on the machine, the machine was intended for export), the machine constants are backed up on cd
siemens indramat drives
facilities:
tool head with 12 positions duplomatic
chip conveyor
tailstock (live approximately 40%, not used)
aerosol extractor from the filter crap workspace
chuck 250 mmcnc lathe spu20cnc
manufacturer kovosvit, sezimovo ã?stã­
1995 go 2004
control systems sinumeric 810 t (the system was already on the machine, the machine was intended for export), the machine constants are backed up on cd
siemens indramat drives
facilities:
tool head with 12 positions duplomatic
chip conveyor
tailstock (live approximately 40%, not used)
aerosol extractor from the filter crap workspace
chuck 250 mm CNC LATHE SPU20CNC MANUFACTURER KOVOSVIT, SEZIMOVO &ATILDE;?ST&ATILDE;&SHY; 1995 GO 2004 CONTROL SYSTEMS SINUMERIC 810 T (THE SYSTEM WAS ALREADY ON THE MACHINE, THE MACHINE WAS INTENDED FOR EXPORT), THE MACHINE CONSTANTS ARE BACKED UP ON CD SIEMENS INDRAMAT DRIVES FACILITIES: TOOL HEAD WITH 12 POSITIONS DUPLOMATIC CHIP CONVEYOR TAILSTOCK (LIVE APPROXIMATELY 40%, NOT USED) AEROSOL EXTRACTOR FROM THE FILTER CRAP WORKSPACE CHUCK 250 MMCNC LATHE SPU20CNC MANUFACTURER KOVOSVIT, SEZIMOVO &ATILDE;?ST&ATILDE;&SHY; 1995 GO 2004 CONTROL SYSTEMS SINUMERIC 810 T (THE SYSTEM WAS ALREADY ON THE MACHINE, THE MACHINE WAS INTENDED FOR EXPORT), THE MACHINE CONSTANTS ARE BACKED UP ON CD SIEMENS INDRAMAT DRIVES FACILITIES: TOOL HEAD WITH 12 POSITIONS DUPLOMATIC CHIP CONVEYOR TAILSTOCK (LIVE APPROXIMATELY 40%, NOT USED) AEROSOL EXTRACTOR FROM THE FILTER CRAP WORKSPACE CHUCK 250 MM
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-tool taper: sk/bt 40 + vdi 40 <br/>measuring range x-axis: 310 mm<br/>measuring range z-axis: 300 mm<br/>table dimensions: 340 x 400 mm<br/>tool diameter: 200 mm<br/>dimensions of machine: 2.000 x 700 x 2.000 mm<br/>weight: ca. 400 kg<br/>equipment:<br/><br/>- zoller 6051 2-axis-digital-readout<br/>- one-hand operating handle<br/>- adapter for vdi40 and sk/bt40<br/>- adapters are available for almost every tooling systems<br/>- incl. two bott floor cupboards<br/><br/><br/><br/><br/> TOOL TAPER: SK/BT 40 + VDI 40
MEASURING RANGE X-AXIS: 310 MM
MEASURING RANGE Z-AXIS: 300 MM
TABLE DIMENSIONS: 340 X 400 MM
TOOL DIAMETER: 200 MM
DIMENSIONS OF MACHINE: 2.000 X 700 X 2.000 MM
WEIGHT: CA. 400 KG
EQUIPMENT:

- ZOLLER 6051 2-AXIS-DIGITAL-READOUT
- ONE-HAND OPERATING HANDLE
- ADAPTER FOR VDI40 AND SK/BT40
- ADAPTERS ARE AVAILABLE FOR ALMOST EVERY TOOLING SYSTEMS
- INCL. TWO BOTT FLOOR CUPBOARDS




Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Precio: 26.704 €
Ubicación: Land-we offer reconditioned peri trio elements 125,06 mâ² with 45% discount
frames, frame with zinc phosphate color primed and painted. new scarf skin

14 element tr 270 x 240
4 element tr 270 x 90
6 element tr 270 x 72
6 element tr 270 x 60
4 element tr 270 x 30

net price: 26704,15eur

also subsets possible / reserved sales

and sale of scaffolding and formwork systems construction machinery; restoration of formwork for a fair price.
sfs master operating company
andreas becker e. kfm., tel. 07305/9562350, fax. 07305/9562352,
mobile: 0049 176 70044689 mr. becker
ust-id-nr: de279047055

office / warehouse address: birch street 15

89185 hã¼ttisheim of humlangen-

registry court ulm: hra722943
 WE OFFER RECONDITIONED PERI TRIO ELEMENTS 125,06 M&ACIRC;&SUP2; WITH 45% DISCOUNT FRAMES, FRAME WITH ZINC PHOSPHATE COLOR PRIMED AND PAINTED. NEW SCARF SKIN 14 ELEMENT TR 270 X 240 4 ELEMENT TR 270 X 90 6 ELEMENT TR 270 X 72 6 ELEMENT TR 270 X 60 4 ELEMENT TR 270 X 30 NET PRICE: 26704,15EUR ALSO SUBSETS POSSIBLE / RESERVED SALES AND SALE OF SCAFFOLDING AND FORMWORK SYSTEMS CONSTRUCTION MACHINERY; RESTORATION OF FORMWORK FOR A FAIR PRICE. SFS MASTER OPERATING COMPANY ANDREAS BECKER E. KFM., TEL. 07305/9562350, FAX. 07305/9562352, MOBILE: 0049 176 70044689 MR. BECKER UST-ID-NR: DE279047055 OFFICE / WAREHOUSE ADDRESS: BIRCH STREET 15 89185 H&ATILDE;&FRAC14;TTISHEIM OF HUMLANGEN- REGISTRY COURT ULM: HRA722943
Vendedor: SFS Andreas Becker e.Kfm.
Año de construcción: usado
Precio: used machinery auction RESALE 16.670 €
Ubicación: Land-weight approx.: 4350 kg<br/>dimensions (l x w x h) approx.: 2700 x 2000 x 2600 mm<br/>description: deckel maho milltap 700 machining centre<br> <br> spindle is removed and defective<br> chip disposal package<br> control siemens 840d solution line<br> digital progress panel<br> preparation 4th axis lehmann ea-510. leco indirect<br> spindle speed up to 24. 000 rpm bt30<br> tool magazine 25 places<br> direct displacement encoder x,y,z<br> sealing air for direct measuring systems<br> renishaw probe kit for milltap 700<br> flushing gun for chip flushing<br> software package job shop and sinumerik mdynamics<br> handwheel for setup operation<br> ce-version<br> documentation-1 french<br> display screen german/french<br> <br> main machine 2300 x 1700 x 2600 mm, 4000 kg, chip conveyor 2700 x 1800 x 1200 mm, 250 kg, oil tank 1500 x 1200 x 1500 mm, 300 kg, accessories 2000 x 1200 x 1000 mm, 100 kg, loading area on truck 5 m WEIGHT APPROX.: 4350 KG
DIMENSIONS (L X W X H) APPROX.: 2700 X 2000 X 2600 MM
DESCRIPTION: DECKEL MAHO MILLTAP 700 MACHINING CENTRE

SPINDLE IS REMOVED AND DEFECTIVE
CHIP DISPOSAL PACKAGE
CONTROL SIEMENS 840D SOLUTION LINE
DIGITAL PROGRESS PANEL
PREPARATION 4TH AXIS LEHMANN EA-510. LECO INDIRECT
SPINDLE SPEED UP TO 24. 000 RPM BT30
TOOL MAGAZINE 25 PLACES
DIRECT DISPLACEMENT ENCODER X,Y,Z
SEALING AIR FOR DIRECT MEASURING SYSTEMS
RENISHAW PROBE KIT FOR MILLTAP 700
FLUSHING GUN FOR CHIP FLUSHING
SOFTWARE PACKAGE JOB SHOP AND SINUMERIK MDYNAMICS
HANDWHEEL FOR SETUP OPERATION
CE-VERSION
DOCUMENTATION-1 FRENCH
DISPLAY SCREEN GERMAN/FRENCH

MAIN MACHINE 2300 X 1700 X 2600 MM, 4000 KG, CHIP CONVEYOR 2700 X 1800 X 1200 MM, 250 KG, OIL TANK 1500 X 1200 X 1500 MM, 300 KG, ACCESSORIES 2000 X 1200 X 1000 MM, 100 KG, LOADING AREA ON TRUCK 5 M
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 750 €
Ubicación: Land-esta mobile entstauber
type 10 wn dustomat hms
motor 1,1 kw
nominal volume flow 720 mâ³/h
diameter suction pipe 100 mm
ce marking of school operation
checked ESTA MOBILE ENTSTAUBER TYPE 10 WN DUSTOMAT HMS MOTOR 1,1 KW NOMINAL VOLUME FLOW 720 M&ACIRC;&SUP3;/H DIAMETER SUCTION PIPE 100 MM CE MARKING OF SCHOOL OPERATION CHECKED
Vendedor: Optimal Maschinen UG (haftungsbeschränkt)
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 800 kg<br/>dimensions (l x w x h) approx.: 4000 x 2200 x 2200 mm<br/>description: consisting of 1 sandblasting cabin, cabin size 820 x 500 x 350 mm, 1 hacksaw, cutting width 200 mm, saw blade size 13 x 0,64 x 1640 mm, 2 mobile extraction systems, each approx. 1 kw motor, 1 tool washing system, washtub 380 x 380 mm, depth 130 mm, 2 column drilling machines, 1 small radiant heater und 1 hydraulic press, press force approx. 10 t WEIGHT APPROX.: 800 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 2200 X 2200 MM
DESCRIPTION: CONSISTING OF 1 SANDBLASTING CABIN, CABIN SIZE 820 X 500 X 350 MM, 1 HACKSAW, CUTTING WIDTH 200 MM, SAW BLADE SIZE 13 X 0,64 X 1640 MM, 2 MOBILE EXTRACTION SYSTEMS, EACH APPROX. 1 KW MOTOR, 1 TOOL WASHING SYSTEM, WASHTUB 380 X 380 MM, DEPTH 130 MM, 2 COLUMN DRILLING MACHINES, 1 SMALL RADIANT HEATER UND 1 HYDRAULIC PRESS, PRESS FORCE APPROX. 10 T
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 750 €
Ubicación: Land-paint mist extraction system
-suction area 2000 x 2000 mm
-flow rate approx. 4900 m â³/h
-pipe connection 400 mm
available from kw 15-2019! PAINT MIST EXTRACTION SYSTEM -SUCTION AREA 2000 X 2000 MM -FLOW RATE APPROX. 4900 M &ACIRC;&SUP3;/H -PIPE CONNECTION 400 MM AVAILABLE FROM KW 15-2019!
Vendedor: MSH-nrw GmbH
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine 4-side sealing p60xl<br><br>vertical packaging machine, full stainless steel construction (ss304), servo-driven film transport, plc with touch screen interface for easy operation, synchronisation for film feed system and date printer, eye-mark sensor for registration film, one-piece bag former for quick change. <br><br>- specifications: bag length: max. 380mm | bag width: 120-280mm | max. speed of the machine in neutral: 60 cycles/minute | power: 220v, 4.0kw | compressed air: 0,40m³, 6bar | weight (net/gross): 650/730kg.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE 4-SIDE SEALING P60XL

VERTICAL PACKAGING MACHINE, FULL STAINLESS STEEL CONSTRUCTION (SS304), SERVO-DRIVEN FILM TRANSPORT, PLC WITH TOUCH SCREEN INTERFACE FOR EASY OPERATION, SYNCHRONISATION FOR FILM FEED SYSTEM AND DATE PRINTER, EYE-MARK SENSOR FOR REGISTRATION FILM, ONE-PIECE BAG FORMER FOR QUICK CHANGE.

- SPECIFICATIONS: BAG LENGTH: MAX. 380MM | BAG WIDTH: 120-280MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | POWER: 220V, 4.0KW | COMPRESSED AIR: 0,40M³, 6BAR | WEIGHT (NET/GROSS): 650/730KG.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-2 x cutting mill alpine augsburg: rotor dimensions: 40 x 100 mm open rotor, 5 rotor blade & 3 stator, drive 45 kw. 

1 x cutting mill alpine augsburg: rotor dimensions: 40 x 63 mm open rotor, 5 rotor blade & 3 stator, drive 30 kw.

1 x cutting mill condux: rotor dimensions: 45 x 60 mm open rotor, 3 rotor blade & 2 statormesser bevel cut, drive 30 kw.

1 x ver recorded fine impact mill alpine augsburg upz 400: drive 37 kw 1 x zig-zag separator alpine augsburg: fan 8.5 kw 2 X CUTTING MILL ALPINE AUGSBURG: ROTOR DIMENSIONS: 40 X 100 MM OPEN ROTOR, 5 ROTOR BLADE & 3 STATOR, DRIVE 45 KW. 1 X CUTTING MILL ALPINE AUGSBURG: ROTOR DIMENSIONS: 40 X 63 MM OPEN ROTOR, 5 ROTOR BLADE & 3 STATOR, DRIVE 30 KW. 1 X CUTTING MILL CONDUX: ROTOR DIMENSIONS: 45 X 60 MM OPEN ROTOR, 3 ROTOR BLADE & 2 STATORMESSER BEVEL CUT, DRIVE 30 KW. 1 X VER RECORDED FINE IMPACT MILL ALPINE AUGSBURG UPZ 400: DRIVE 37 KW 1 X ZIG-ZAG SEPARATOR ALPINE AUGSBURG: FAN 8.5 KW
Vendedor: Herr Karl Neigert
Año de construcción: usado
Precio: 3.690 €
Ubicación: Land-amtec shrinktunnel-pof-l pro-version<br><br>shrink tunnel for middle sized products, pro-version for max. evenly temperature, ideal to be combined with amtec maxishrink w20l pro-version and speed shrink w30l pro-version. suitable for polyolefin films. adjustable speed and temperature. - technical specifications: 380v, 14kw | speed: 0-30m/min | temperature: up to 175°c | max. product dimensions (mm): w370xh230 | machine dimensions (mm): l1200xw670xh1290 | weight (net/gross): ca. 250/300kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINKTUNNEL-POF-L PRO-VERSION

SHRINK TUNNEL FOR MIDDLE SIZED PRODUCTS, PRO-VERSION FOR MAX. EVENLY TEMPERATURE, IDEAL TO BE COMBINED WITH AMTEC MAXISHRINK W20L PRO-VERSION AND SPEED SHRINK W30L PRO-VERSION. SUITABLE FOR POLYOLEFIN FILMS. ADJUSTABLE SPEED AND TEMPERATURE. - TECHNICAL SPECIFICATIONS: 380V, 14KW | SPEED: 0-30M/MIN | TEMPERATURE: UP TO 175°C | MAX. PRODUCT DIMENSIONS (MM): W370XH230 | MACHINE DIMENSIONS (MM): L1200XW670XH1290 | WEIGHT (NET/GROSS): CA. 250/300KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-spare parts for mammography equipment make: ge type: dmr
model number: zfhoodmr type: 2102284

we have many working parts.
ask for the individual parts.

you will receive a quick reply with quotation. SPARE PARTS FOR MAMMOGRAPHY EQUIPMENT MAKE: GE TYPE: DMR MODEL NUMBER: ZFHOODMR TYPE: 2102284 WE HAVE MANY WORKING PARTS. ASK FOR THE INDIVIDUAL PARTS. YOU WILL RECEIVE A QUICK REPLY WITH QUOTATION.
Vendedor: Wilbert Medizintechnik
Año de construcción: usado
Ubicación: Land-amtec flowwrap f150-2xl80gn - 1 rotary knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 480mm | 1 rotating knife | 220v, 2.8kw | no compressed air required | max. speed of the machine in neutral: 150 cycles/min | max. bag (not product) dimensions (mm): l(100-450)xw(50-210)xh(0-80) | machine dimensions (mm): l3990xw900xh1468 | weight (net/gross): 900/950kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F150-2XL80GN - 1 ROTARY KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 480MM | 1 ROTATING KNIFE | 220V, 2.8KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 150 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(100-450)XW(50-210)XH(0-80) | MACHINE DIMENSIONS (MM): L3990XW900XH1468 | WEIGHT (NET/GROSS): 900/950KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-5-axis machining center-
fehlmann picomax 825 with erowa pallet automation

control: heidenhein itnc530
year of construction: 2010

procedures/swing areas:
x-axis: 820mm
y-axis: 700mm
z-axis: 450mm
a-axis: 230â° (view compactset 115 â° +/-)
c-axis: 360â° (round table)

rapid traverse:
30 000 mm (linear axes)

spindle speed range: 50-20,000 1/min
interface: hsk63
power: 24kw
torque: 120nm

tool changer:
80 positions (pickup)

facilities: erowa robot easy automation with 10 pallets for workpieces up to 310 x 310 x 300 mm 80 bar ikz 1050 l coolant tank (coolant pressure above m features adjustable)

renishaw omp 40-2 probe

laser tool measurement for d0, 3-80 mm

direct path measurement systems for all axes (xyzac)

actively cooled shaft drives in all axes (xyzac)
actively cooled y carriage

automatic length compensation of main spindle via direct measuring system

5achsen-simultan and spline interpolsation (polynomials 3.grades)

round table with torque drive 5-AXIS MACHINING CENTER- FEHLMANN PICOMAX 825 WITH EROWA PALLET AUTOMATION CONTROL: HEIDENHEIN ITNC530 YEAR OF CONSTRUCTION: 2010 PROCEDURES/SWING AREAS: X-AXIS: 820MM Y-AXIS: 700MM Z-AXIS: 450MM A-AXIS: 230&ACIRC;&DEG; (VIEW COMPACTSET 115 &ACIRC;&DEG; +/-) C-AXIS: 360&ACIRC;&DEG; (ROUND TABLE) RAPID TRAVERSE: 30 000 MM (LINEAR AXES) SPINDLE SPEED RANGE: 50-20,000 1/MIN INTERFACE: HSK63 POWER: 24KW TORQUE: 120NM TOOL CHANGER: 80 POSITIONS (PICKUP) FACILITIES: EROWA ROBOT EASY AUTOMATION WITH 10 PALLETS FOR WORKPIECES UP TO 310 X 310 X 300 MM 80 BAR IKZ 1050 L COOLANT TANK (COOLANT PRESSURE ABOVE M FEATURES ADJUSTABLE) RENISHAW OMP 40-2 PROBE LASER TOOL MEASUREMENT FOR D0, 3-80 MM DIRECT PATH MEASUREMENT SYSTEMS FOR ALL AXES (XYZAC) ACTIVELY COOLED SHAFT DRIVES IN ALL AXES (XYZAC) ACTIVELY COOLED Y CARRIAGE AUTOMATIC LENGTH COMPENSATION OF MAIN SPINDLE VIA DIRECT MEASURING SYSTEM 5ACHSEN-SIMULTAN AND SPLINE INTERPOLSATION (POLYNOMIALS 3.GRADES) ROUND TABLE WITH TORQUE DRIVE
Vendedor: RG-Tools GmbH
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine 4-side sealing p60l<br><br>vertical packaging machine, full stainless steel construction (ss304), servo-driven film transport, plc with touch screen interface for easy operation, synchronisation for film feed system and date printer, eye-mark sensor for registration film, one-piece bag former for quick change. <br><br>- specifications: bag length: max. 300mm | bag width: 100-240mm | max. speed of the machine in neutral: 60 cycles/minute | power: 220v, 3.5kw | compressed air: 0.35m³, 6bar | weight (net/gross): 550/620kg.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE 4-SIDE SEALING P60L

VERTICAL PACKAGING MACHINE, FULL STAINLESS STEEL CONSTRUCTION (SS304), SERVO-DRIVEN FILM TRANSPORT, PLC WITH TOUCH SCREEN INTERFACE FOR EASY OPERATION, SYNCHRONISATION FOR FILM FEED SYSTEM AND DATE PRINTER, EYE-MARK SENSOR FOR REGISTRATION FILM, ONE-PIECE BAG FORMER FOR QUICK CHANGE.

- SPECIFICATIONS: BAG LENGTH: MAX. 300MM | BAG WIDTH: 100-240MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | POWER: 220V, 3.5KW | COMPRESSED AIR: 0.35M³, 6BAR | WEIGHT (NET/GROSS): 550/620KG.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-acw 2500 plant b apolda nbs 400 cnc
manufacturer: b apolda year: 2002 type: acw 2500

working width: 2300 mm
working length: 7000 mm
control: nbs 400 cnc

burner heads: 1 plasma cutting head
				2 autogenous cutting heads

additional information:

plasma rectifier: kjellberg finsterwalde type pa-s45w
 ACW 2500 PLANT B APOLDA NBS 400 CNC MANUFACTURER: B APOLDA YEAR: 2002 TYPE: ACW 2500 WORKING WIDTH: 2300 MM WORKING LENGTH: 7000 MM CONTROL: NBS 400 CNC BURNER HEADS: 1 PLASMA CUTTING HEAD 2 AUTOGENOUS CUTTING HEADS ADDITIONAL INFORMATION: PLASMA RECTIFIER: KJELLBERG FINSTERWALDE TYPE PA-S45W
Vendedor: Maschinenbörse MV GmbH
Año de construcción: usado
Ubicación: Land-amtec shrinktunnel-pof-xxl pro-version<br><br>shrink tunnel for large sized products, pro-version for max. evenly temperature, ideal to be combined with amtec maxishrink w20xxl pro-version. suitable for polyolefin films. adjustable speed and temperature. - technical specifications: 380v, 30kw | speed: 0-30m/min | temperature: up to 175°c | max. product dimensions (mm): w700xh300 | machine dimensions (mm): l2100xw950xh1315 | weight (net/gross): ca. 350/400kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINKTUNNEL-POF-XXL PRO-VERSION

SHRINK TUNNEL FOR LARGE SIZED PRODUCTS, PRO-VERSION FOR MAX. EVENLY TEMPERATURE, IDEAL TO BE COMBINED WITH AMTEC MAXISHRINK W20XXL PRO-VERSION. SUITABLE FOR POLYOLEFIN FILMS. ADJUSTABLE SPEED AND TEMPERATURE. - TECHNICAL SPECIFICATIONS: 380V, 30KW | SPEED: 0-30M/MIN | TEMPERATURE: UP TO 175°C | MAX. PRODUCT DIMENSIONS (MM): W700XH300 | MACHINE DIMENSIONS (MM): L2100XW950XH1315 | WEIGHT (NET/GROSS): CA. 350/400KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-crate unloading and loading system with abb industrial robots

automatic robot packaging system made by sasib in 1998. the system is used for loading bottles in crates with the maximum capacity of 80.000 bph. it includes six floor-mounted robots and a control unit. the robots are made by abb in 1998 and they are refurbished in 2010/2011. production was stopped about one year after this refurbishment and therefore abb robots are in good working order. abb irb 6400 robots have a 6-axis movement, a reach of 2.4 meters and maximum handling capacity of 200 kg. system includes complete conveyor systems and gripping tools for the robots.

system manufacturer: sasib s.p.a., italy
system model: robokombi deca 5-5t
serial number: ibh 005 1226
crate loading capacity: 80 000 bph
crate unloading capacity: 20 000 bph

robot manufacturer: abb robotics products ab, sweden
robot type: irb6400 m97a
version: irb6400/2.4-200
year of manufacture: 1998
number of robots 6 pcs
payload capacity up to 200 kg
serial number: 64-06736
voltage: 3 x 400 v, 50 – 60 hz
electric power: 7.2 kva
maximum reach: 2.4 m
manipulator weight: 2.050 kg
controller weight: 250 kg
axes: 6
axis velocities: 90 – 190 °/s, depending on axis
axis velocity resolution: approx. 0.01 °/s each axis   CRATE UNLOADING AND LOADING SYSTEM WITH ABB INDUSTRIAL ROBOTS AUTOMATIC ROBOT PACKAGING SYSTEM MADE BY SASIB IN 1998. THE SYSTEM IS USED FOR LOADING BOTTLES IN CRATES WITH THE MAXIMUM CAPACITY OF 80.000 BPH. IT INCLUDES SIX FLOOR-MOUNTED ROBOTS AND A CONTROL UNIT. THE ROBOTS ARE MADE BY ABB IN 1998 AND THEY ARE REFURBISHED IN 2010/2011. PRODUCTION WAS STOPPED ABOUT ONE YEAR AFTER THIS REFURBISHMENT AND THEREFORE ABB ROBOTS ARE IN GOOD WORKING ORDER. ABB IRB 6400 ROBOTS HAVE A 6-AXIS MOVEMENT, A REACH OF 2.4 METERS AND MAXIMUM HANDLING CAPACITY OF 200 KG. SYSTEM INCLUDES COMPLETE CONVEYOR SYSTEMS AND GRIPPING TOOLS FOR THE ROBOTS. SYSTEM MANUFACTURER: SASIB S.P.A., ITALY SYSTEM MODEL: ROBOKOMBI DECA 5-5T SERIAL NUMBER: IBH 005 1226 CRATE LOADING CAPACITY: 80 000 BPH CRATE UNLOADING CAPACITY: 20 000 BPH ROBOT MANUFACTURER: ABB ROBOTICS PRODUCTS AB, SWEDEN ROBOT TYPE: IRB6400 M97A VERSION: IRB6400/2.4-200 YEAR OF MANUFACTURE: 1998 NUMBER OF ROBOTS 6 PCS PAYLOAD CAPACITY UP TO 200 KG SERIAL NUMBER: 64-06736 VOLTAGE: 3 X 400 V, 50 – 60 HZ ELECTRIC POWER: 7.2 KVA MAXIMUM REACH: 2.4 M MANIPULATOR WEIGHT: 2.050 KG CONTROLLER WEIGHT: 250 KG AXES: 6 AXIS VELOCITIES: 90 – 190 °/S, DEPENDING ON AXIS AXIS VELOCITY RESOLUTION: APPROX. 0.01 °/S EACH AXIS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec flowwrap f40-2xl110gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 600mm | 1 pendular knife | 220v, 3.6kw | no compressed air required | max. speed of the machine in neutral: 40 cycles/min | max. bag (not product) dimensions (mm): l(120-450)xw(50-200)xh(10-110) | machine dimensions (mm): l4380xw970xh1500 | weight (net/gross): 1160/1260kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F40-2XL110GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 600MM | 1 PENDULAR KNIFE | 220V, 3.6KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 40 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(120-450)XW(50-200)XH(10-110) | MACHINE DIMENSIONS (MM): L4380XW970XH1500 | WEIGHT (NET/GROSS): 1160/1260KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine husky hylectric h300 for pet bottle closures
 
two complete pet bottle cap production lines both equipped with husky hylectric h300 injection molding machines. both production lines include italian plastic systems made granule pneumatic transport, mixing and feeding systems as well as green box made cap cooling drums. equipment was manufactured in year 2006 is designed to produce 28 mm pet caps according to standard light bpf 28 mm at speed of 36 000 caps / hour. both machines were stopped in 2014 but are still installed and powered.
 
technical data
 
machine #1 type: husky h300, rs95/80, ser. ?2853225
manufacturing year 2006, total operating hours 44918
mold no1 corvaglia 64 cavity no 28-22-21-1 air cooled

machine #2 type: husky h300, rs80/70, ser. ?3372564
manufacturing year 2006, total operating hours 57790
mold no 2 corvaglia 64 cavity no 103-a-st water cooled

cap format bpf 28 mm
cycle time: 6.3 seconds
capacity 36 000 cap / h
control system: beckfoff industrial pc
mmi polaris ttc 2100 with touch screen   INJECTION MOLDING MACHINE HUSKY HYLECTRIC H300 FOR PET BOTTLE CLOSURES TWO COMPLETE PET BOTTLE CAP PRODUCTION LINES BOTH EQUIPPED WITH HUSKY HYLECTRIC H300 INJECTION MOLDING MACHINES. BOTH PRODUCTION LINES INCLUDE ITALIAN PLASTIC SYSTEMS MADE GRANULE PNEUMATIC TRANSPORT, MIXING AND FEEDING SYSTEMS AS WELL AS GREEN BOX MADE CAP COOLING DRUMS. EQUIPMENT WAS MANUFACTURED IN YEAR 2006 IS DESIGNED TO PRODUCE 28 MM PET CAPS ACCORDING TO STANDARD LIGHT BPF 28 MM AT SPEED OF 36 000 CAPS / HOUR. BOTH MACHINES WERE STOPPED IN 2014 BUT ARE STILL INSTALLED AND POWERED. TECHNICAL DATA MACHINE #1 TYPE: HUSKY H300, RS95/80, SER. ?2853225 MANUFACTURING YEAR 2006, TOTAL OPERATING HOURS 44918 MOLD NO1 CORVAGLIA 64 CAVITY NO 28-22-21-1 AIR COOLED MACHINE #2 TYPE: HUSKY H300, RS80/70, SER. ?3372564 MANUFACTURING YEAR 2006, TOTAL OPERATING HOURS 57790 MOLD NO 2 CORVAGLIA 64 CAVITY NO 103-A-ST WATER COOLED CAP FORMAT BPF 28 MM CYCLE TIME: 6.3 SECONDS CAPACITY 36 000 CAP / H CONTROL SYSTEM: BECKFOFF INDUSTRIAL PC MMI POLARIS TTC 2100 WITH TOUCH SCREEN
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine tetraeder and pillow pack tp50 - including 0.5l/10head scale<br><br>pro-version high performance vertical packaging machine for tetraeder and pillow bags including 0.5l/10-head-scale. innovative rotation sealing system for triangle bag. omron plc, interactive 9.7-lcd touch panel display, schneider and omron electronic components, airtac pneumatics and omron pid temperature control, servomotor film pulling, pneumatic sealing unit. <br><br>- specifications: vertical and horizontal sealing width: 10mm | cutting way: searate cutting | stainless steel (ss304) | 10-head-0.5-liter-multiscale | weighing range: 5-500g | accurracy: 0.1-2g | max. speed of the machine in neutral: (only weigher, not complete system): 60 cycles/minute | 9.7 touchscreen | 100 program setting | bag sizes: l(50-230)xw(60-160)mm | max. speed of the machine in neutral: 50 cycles/minute | 220v/3.5kw | 6bar, 0.3m³/min | machine dimensions: l1100xw1400xh2220mm | weight: 650kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE TETRAEDER AND PILLOW PACK TP50 - INCLUDING 0.5L/10HEAD SCALE

PRO-VERSION HIGH PERFORMANCE VERTICAL PACKAGING MACHINE FOR TETRAEDER AND PILLOW BAGS INCLUDING 0.5L/10-HEAD-SCALE. INNOVATIVE ROTATION SEALING SYSTEM FOR TRIANGLE BAG. OMRON PLC, INTERACTIVE 9.7-LCD TOUCH PANEL DISPLAY, SCHNEIDER AND OMRON ELECTRONIC COMPONENTS, AIRTAC PNEUMATICS AND OMRON PID TEMPERATURE CONTROL, SERVOMOTOR FILM PULLING, PNEUMATIC SEALING UNIT.

- SPECIFICATIONS: VERTICAL AND HORIZONTAL SEALING WIDTH: 10MM | CUTTING WAY: SEARATE CUTTING | STAINLESS STEEL (SS304) | 10-HEAD-0.5-LITER-MULTISCALE | WEIGHING RANGE: 5-500G | ACCURRACY: 0.1-2G | MAX. SPEED OF THE MACHINE IN NEUTRAL: (ONLY WEIGHER, NOT COMPLETE SYSTEM): 60 CYCLES/MINUTE | 9.7 TOUCHSCREEN | 100 PROGRAM SETTING | BAG SIZES: L(50-230)XW(60-160)MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 50 CYCLES/MINUTE | 220V/3.5KW | 6BAR, 0.3M³/MIN | MACHINE DIMENSIONS: L1100XW1400XH2220MM | WEIGHT: 650KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-empty bottle inspector heuft inline ebi with reflexx and spectrum tx units
 
the machine was installed in year 2007 and its currently in very good operational condition. the capacity is 72 000 bph. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. it has heuft pilot cd manuals in english
 
this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.
 
sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.
 
the ebi has optical heuft thread detection system which inspects the screw closure finish on a glass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.
 
this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.
 
technical data:
manufacturer: heuft gmbh, germany
year: 2007
type: heuft spectrum tx inline ebi with reflexx image processing and heuft syncron system
capacity: 72 000 bph
reliability: 99.9 % detection complete heuft manuals in english.   EMPTY BOTTLE INSPECTOR HEUFT INLINE EBI WITH REFLEXX AND SPECTRUM TX UNITS THE MACHINE WAS INSTALLED IN YEAR 2007 AND ITS CURRENTLY IN VERY GOOD OPERATIONAL CONDITION. THE CAPACITY IS 72 000 BPH. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. IT HAS HEUFT PILOT CD MANUALS IN ENGLISH THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON A GLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 2007 TYPE: HEUFT SPECTRUM TX INLINE EBI WITH REFLEXX IMAGE PROCESSING AND HEUFT SYNCRON SYSTEM CAPACITY: 72 000 BPH RELIABILITY: 99.9 % DETECTION COMPLETE HEUFT MANUALS IN ENGLISH.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec shrinktunnel-pof-xxxl (high speed)<br><br>shrinktunnel suitable to be combined with amtec shrink wrapper sideshrink w60xxxl. high speed shrinking with 0-20 m/min for pof (polyolefin) film. <br><br>- specifications: max. packaging size: l1300xw700xh250mm | tunnel size: l1500xw800xh300mm | machine dimensions: l1800xw1290xh1300mm | max. 20kw, 380v | weight: 550kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINKTUNNEL-POF-XXXL (HIGH SPEED)

SHRINKTUNNEL SUITABLE TO BE COMBINED WITH AMTEC SHRINK WRAPPER SIDESHRINK W60XXXL. HIGH SPEED SHRINKING WITH 0-20 M/MIN FOR POF (POLYOLEFIN) FILM.

- SPECIFICATIONS: MAX. PACKAGING SIZE: L1300XW700XH250MM | TUNNEL SIZE: L1500XW800XH300MM | MACHINE DIMENSIONS: L1800XW1290XH1300MM | MAX. 20KW, 380V | WEIGHT: 550KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-cassette for warehouse, about 1,539 cassettes, cassette length 6, 50 m, 3, 000 kg/kasstte - used -:
 
price on request!
 
manufacturer: fehr
year of construction: 2001
cassettes ges. 1,539 units
specification
1 electrically operated double table long good stack machine, automatically controlled, for the storage and retrieval of for good material, with the help of cassettes
technical data:
capacity 2x3000kg
bottom load table position above ground 700 mm
top load table position above ground 12110 mm
room height 13'450 mm
lifting speed 35 m / min
travel speed 80 m / min
pull-out speed 85 m / min
operating voltage, three-phase 400 v / 50 hz
control voltage 230 v / 50 hz
24 v dc
cassette type internal dimensions (wxhxl) a 520 x 270 x 6500 mm
type b 520 x 520 x 6500 mm
device performance at 100% load 46 ds / h
according to fem based on ub-3000 9.851
pull-out force on the cassette gripper (20% of the payload plus cartridge weight)
 
control automatically arranged using an automatic control over operating terminal, at the camp office
1. 1 double-sided track, length approx 29 m
to hang up on the concrete floor, consisting of:
the two rails of a 55, with the shocks, complete with attachment fittings and the limit stops. the rails are with fade-free special grout under poured.
2. 1 longitudinal-power supply, length approx 29 m, consisting of:
vahle plastic conductor line, with guard, complete with the mounting brackets.
3. 1 long goods stacking devices, consisting of:
camp 2 head straps welded design, with the chassis, this consisting of wã¤lzge controlled from the two engines with shaft mounted gearboxes built-on, as well as the 4 - crane wheels, with leadership roles, running laterally on the road,
2 columns in welded box construction, with the guides for the lifters from material performed st 52.3, screwed on the head straps, including the stiffening frame, as well as a ladder of descent,.
1 pallet truck, consisting of: the steel construction with the necessary rubber buffers for the two hã¶henend positions, the roller bearing support and leadership roles, the double cassette table with glides, the extractor, the centering with side guard rails to complete the box, complete with the runners for the gripper, the drive motors, sprockets, shafts, chains and electrical installation,
controls the horizontal, which â«fachbelegtâ».
as a hoist is used:
1 controlled engine
with intermediate gear (designed according to fem 3 m) and drum includes cords and ball-bearing pulleys; security 12, with double-grooved rope drum, dust-protected bearings drum bearing,
rope pulleys conditions according to din 15020.
4. electrical installation, comprising:
-the special cables, including all required terminal boxes, connecting cables fixed installed on the device
-the flexible power supply in cable caterpillar to the trucks,
-completely wired cabinet incl. contactor and the necessary controls, the mushroom-head pushbutton, which shuts off the main contactor (red mushroom can be rotated), switch with push button, key switch
-the two key selector switches, which are used for the pre-selection of the operating modes â«tip operation/automatic modeâ»,
the limit switches for the limitation of the lifting and moving
-the reciprocal locking of lifting and suspension compared to the ausziehvorâ¬
-direction, the laterally mounted clamping wires to the continuous control of the speed profile
-the profile control, which monitors whether the space between the shelf and device is free,
-the output fuse, which prevents that cassettes in a free space be outsourced,
-excess height control, which prevents a training and storage of high-loaded cartridges,
-the control of tape position on the table,
-the fault indicator in the control panel on the lift truck,
-the operating hour counters for driving and lifting mechanism
displacement measuring systems
the wear-free optical measuring system guarantees maximum service life and precise way capture of the x - and y-coordinates. the way capture of the two gripper through the absolute value encoder is located in the millimetre range. both systems deliver the absolutely correct readings again even after a power failure. thus it takes no movements for repositioning and the device starts working immediately without delay.
driving behavior
driving in the x and y axes is such that at the maximum possible speed infinitely variable over short or long distances optimal speed curves are driven. the behavior of the device dimensions at various distances is taken into account and flows as a control variable with a. the pendulum effect is compensated with counteract the driving curve characteristics,
learning functions
the computer software is so forward-looking that hardly a parameterization of various sizes must be done by the programmer. the software adaptation to different design types of device and storage compartments is done through the learning and self-learning onsite. following learning processes take place during commissioning on site:
-self-learning of the xy-driving behavior
-learning of the gripper behavior
-learning the transfer and recording places of the periphery
self learning the topology of all storage compartments of different arrangement and sizes
operating modes
-jog
the long good stacking device in the direction of travel, the truck and the two pull-out devices can be moved with the control buttons.
-semi automatic (automatic start-up), arranged in the stationary cupboard.
with the hand-held micro terminal, various movements are run separately or in combination automatically:
-driving horizontal
vertical lifting/lowering
-pull cassette
-slide tape
-positioning in front of the nearest
option
pc-cabinet for m fs calculator
execution: wxhxd 600 x 1900 x 600 mm
4-field 17 "monitor field of vision
part of front door for computer unit
integrated keyboard tray
storage compartment with removable rails
socket 100 mm
(ii) peripheral components, including:
1 1 carousel ka-3000 gr gr
for cassettes with rods
technical data:
capacity/capacity 3000 kg
number of pitches 4
conveying speed along 24 m / min
cross conveyor speed 40 m / min
height from top of floor 700 mm
operating voltage 400 v / 50 hz
control voltage 230 v / 50 hz
the cartridge space tracking via the automatic control. the carousel consists in particular of:
outsourcing train, consisting of:
-the steel foot plates and anchors, directly on the ground turned off and integrated into the shelf, suitable for the installation of the required mechanical parts
-the spezialgleitem, as well as the lateral guide
-the gripper mechanism, which contains the tape and transported to the next position positively
the gear motor with chain, the sprocket wheels and the chain guide
cross conveyor belt, comprising;
-two cassette courses, one of them as work provided
-the steel construction incl. foot plates and anchors, placed directly on the floor, suitable for the installation of the required mechanical parts
-the special gliders, as well as the lateral guide
-the querverschiebebalken as a driver for the cassettes
-the drive motor with the required drive elements
-the mechanical preparations for the load cells installation at the workplace
storage car, running such as paging railway
electrical control consisting of:
-the control panel with push buttons for all individual movements, including on/off button and emergency push button
-the position and control switches
-power and control supply
-firmly installed control cabinets with built-in control
-the necessary cables, as well as the internal wiring
the safety light barrier incl. mounting brackets, which perceives the person protection during cartridge movement
 
condition: used, the last maintenance was performed in 2017, shortly after it was mined professionally, so that it can be rebuilt at any time. the company which has degraded the plant could perform the installation.
available: available now
location: nuremberg CASSETTE FOR WAREHOUSE, ABOUT 1,539 CASSETTES, CASSETTE LENGTH 6, 50 M, 3, 000 KG/KASSTTE - USED -: PRICE ON REQUEST! MANUFACTURER: FEHR YEAR OF CONSTRUCTION: 2001 CASSETTES GES. 1,539 UNITS SPECIFICATION 1 ELECTRICALLY OPERATED DOUBLE TABLE LONG GOOD STACK MACHINE, AUTOMATICALLY CONTROLLED, FOR THE STORAGE AND RETRIEVAL OF FOR GOOD MATERIAL, WITH THE HELP OF CASSETTES TECHNICAL DATA: CAPACITY 2X3000KG BOTTOM LOAD TABLE POSITION ABOVE GROUND 700 MM TOP LOAD TABLE POSITION ABOVE GROUND 12110 MM ROOM HEIGHT 13'450 MM LIFTING SPEED 35 M / MIN TRAVEL SPEED 80 M / MIN PULL-OUT SPEED 85 M / MIN OPERATING VOLTAGE, THREE-PHASE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ 24 V DC CASSETTE TYPE INTERNAL DIMENSIONS (WXHXL) A 520 X 270 X 6500 MM TYPE B 520 X 520 X 6500 MM DEVICE PERFORMANCE AT 100% LOAD 46 DS / H ACCORDING TO FEM BASED ON UB-3000 9.851 PULL-OUT FORCE ON THE CASSETTE GRIPPER (20% OF THE PAYLOAD PLUS CARTRIDGE WEIGHT) CONTROL AUTOMATICALLY ARRANGED USING AN AUTOMATIC CONTROL OVER OPERATING TERMINAL, AT THE CAMP OFFICE 1. 1 DOUBLE-SIDED TRACK, LENGTH APPROX 29 M TO HANG UP ON THE CONCRETE FLOOR, CONSISTING OF: THE TWO RAILS OF A 55, WITH THE SHOCKS, COMPLETE WITH ATTACHMENT FITTINGS AND THE LIMIT STOPS. THE RAILS ARE WITH FADE-FREE SPECIAL GROUT UNDER POURED. 2. 1 LONGITUDINAL-POWER SUPPLY, LENGTH APPROX 29 M, CONSISTING OF: VAHLE PLASTIC CONDUCTOR LINE, WITH GUARD, COMPLETE WITH THE MOUNTING BRACKETS. 3. 1 LONG GOODS STACKING DEVICES, CONSISTING OF: CAMP 2 HEAD STRAPS WELDED DESIGN, WITH THE CHASSIS, THIS CONSISTING OF W&ATILDE;&CURREN;LZGE CONTROLLED FROM THE TWO ENGINES WITH SHAFT MOUNTED GEARBOXES BUILT-ON, AS WELL AS THE 4 - CRANE WHEELS, WITH LEADERSHIP ROLES, RUNNING LATERALLY ON THE ROAD, 2 COLUMNS IN WELDED BOX CONSTRUCTION, WITH THE GUIDES FOR THE LIFTERS FROM MATERIAL PERFORMED ST 52.3, SCREWED ON THE HEAD STRAPS, INCLUDING THE STIFFENING FRAME, AS WELL AS A LADDER OF DESCENT,. 1 PALLET TRUCK, CONSISTING OF: THE STEEL CONSTRUCTION WITH THE NECESSARY RUBBER BUFFERS FOR THE TWO H&ATILDE;&PARA;HENEND POSITIONS, THE ROLLER BEARING SUPPORT AND LEADERSHIP ROLES, THE DOUBLE CASSETTE TABLE WITH GLIDES, THE EXTRACTOR, THE CENTERING WITH SIDE GUARD RAILS TO COMPLETE THE BOX, COMPLETE WITH THE RUNNERS FOR THE GRIPPER, THE DRIVE MOTORS, SPROCKETS, SHAFTS, CHAINS AND ELECTRICAL INSTALLATION, CONTROLS THE HORIZONTAL, WHICH &ACIRC;&LAQUO;FACHBELEGT&ACIRC;&RAQUO;. AS A HOIST IS USED: 1 CONTROLLED ENGINE WITH INTERMEDIATE GEAR (DESIGNED ACCORDING TO FEM 3 M) AND DRUM INCLUDES CORDS AND BALL-BEARING PULLEYS; SECURITY 12, WITH DOUBLE-GROOVED ROPE DRUM, DUST-PROTECTED BEARINGS DRUM BEARING, ROPE PULLEYS CONDITIONS ACCORDING TO DIN 15020. 4. ELECTRICAL INSTALLATION, COMPRISING: -THE SPECIAL CABLES, INCLUDING ALL REQUIRED TERMINAL BOXES, CONNECTING CABLES FIXED INSTALLED ON THE DEVICE -THE FLEXIBLE POWER SUPPLY IN CABLE CATERPILLAR TO THE TRUCKS, -COMPLETELY WIRED CABINET INCL. CONTACTOR AND THE NECESSARY CONTROLS, THE MUSHROOM-HEAD PUSHBUTTON, WHICH SHUTS OFF THE MAIN CONTACTOR (RED MUSHROOM CAN BE ROTATED), SWITCH WITH PUSH BUTTON, KEY SWITCH -THE TWO KEY SELECTOR SWITCHES, WHICH ARE USED FOR THE PRE-SELECTION OF THE OPERATING MODES &ACIRC;&LAQUO;TIP OPERATION/AUTOMATIC MODE&ACIRC;&RAQUO;, THE LIMIT SWITCHES FOR THE LIMITATION OF THE LIFTING AND MOVING -THE RECIPROCAL LOCKING OF LIFTING AND SUSPENSION COMPARED TO THE AUSZIEHVOR&ACIRC;&NOT; -DIRECTION, THE LATERALLY MOUNTED CLAMPING WIRES TO THE CONTINUOUS CONTROL OF THE SPEED PROFILE -THE PROFILE CONTROL, WHICH MONITORS WHETHER THE SPACE BETWEEN THE SHELF AND DEVICE IS FREE, -THE OUTPUT FUSE, WHICH PREVENTS THAT CASSETTES IN A FREE SPACE BE OUTSOURCED, -EXCESS HEIGHT CONTROL, WHICH PREVENTS A TRAINING AND STORAGE OF HIGH-LOADED CARTRIDGES, -THE CONTROL OF TAPE POSITION ON THE TABLE, -THE FAULT INDICATOR IN THE CONTROL PANEL ON THE LIFT TRUCK, -THE OPERATING HOUR COUNTERS FOR DRIVING AND LIFTING MECHANISM DISPLACEMENT MEASURING SYSTEMS THE WEAR-FREE OPTICAL MEASURING SYSTEM GUARANTEES MAXIMUM SERVICE LIFE AND PRECISE WAY CAPTURE OF THE X - AND Y-COORDINATES. THE WAY CAPTURE OF THE TWO GRIPPER THROUGH THE ABSOLUTE VALUE ENCODER IS LOCATED IN THE MILLIMETRE RANGE. BOTH SYSTEMS DELIVER THE ABSOLUTELY CORRECT READINGS AGAIN EVEN AFTER A POWER FAILURE. THUS IT TAKES NO MOVEMENTS FOR REPOSITIONING AND THE DEVICE STARTS WORKING IMMEDIATELY WITHOUT DELAY. DRIVING BEHAVIOR DRIVING IN THE X AND Y AXES IS SUCH THAT AT THE MAXIMUM POSSIBLE SPEED INFINITELY VARIABLE OVER SHORT OR LONG DISTANCES OPTIMAL SPEED CURVES ARE DRIVEN. THE BEHAVIOR OF THE DEVICE DIMENSIONS AT VARIOUS DISTANCES IS TAKEN INTO ACCOUNT AND FLOWS AS A CONTROL VARIABLE WITH A. THE PENDULUM EFFECT IS COMPENSATED WITH COUNTERACT THE DRIVING CURVE CHARACTERISTICS, LEARNING FUNCTIONS THE COMPUTER SOFTWARE IS SO FORWARD-LOOKING THAT HARDLY A PARAMETERIZATION OF VARIOUS SIZES MUST BE DONE BY THE PROGRAMMER. THE SOFTWARE ADAPTATION TO DIFFERENT DESIGN TYPES OF DEVICE AND STORAGE COMPARTMENTS IS DONE THROUGH THE LEARNING AND SELF-LEARNING ONSITE. FOLLOWING LEARNING PROCESSES TAKE PLACE DURING COMMISSIONING ON SITE: -SELF-LEARNING OF THE XY-DRIVING BEHAVIOR -LEARNING OF THE GRIPPER BEHAVIOR -LEARNING THE TRANSFER AND RECORDING PLACES OF THE PERIPHERY SELF LEARNING THE TOPOLOGY OF ALL STORAGE COMPARTMENTS OF DIFFERENT ARRANGEMENT AND SIZES OPERATING MODES -JOG THE LONG GOOD STACKING DEVICE IN THE DIRECTION OF TRAVEL, THE TRUCK AND THE TWO PULL-OUT DEVICES CAN BE MOVED WITH THE CONTROL BUTTONS. -SEMI AUTOMATIC (AUTOMATIC START-UP), ARRANGED IN THE STATIONARY CUPBOARD. WITH THE HAND-HELD MICRO TERMINAL, VARIOUS MOVEMENTS ARE RUN SEPARATELY OR IN COMBINATION AUTOMATICALLY: -DRIVING HORIZONTAL VERTICAL LIFTING/LOWERING -PULL CASSETTE -SLIDE TAPE -POSITIONING IN FRONT OF THE NEAREST OPTION PC-CABINET FOR M FS CALCULATOR EXECUTION: WXHXD 600 X 1900 X 600 MM 4-FIELD 17 "MONITOR FIELD OF VISION PART OF FRONT DOOR FOR COMPUTER UNIT INTEGRATED KEYBOARD TRAY STORAGE COMPARTMENT WITH REMOVABLE RAILS SOCKET 100 MM (II) PERIPHERAL COMPONENTS, INCLUDING: 1 1 CAROUSEL KA-3000 GR GR FOR CASSETTES WITH RODS TECHNICAL DATA: CAPACITY/CAPACITY 3000 KG NUMBER OF PITCHES 4 CONVEYING SPEED ALONG 24 M / MIN CROSS CONVEYOR SPEED 40 M / MIN HEIGHT FROM TOP OF FLOOR 700 MM OPERATING VOLTAGE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ THE CARTRIDGE SPACE TRACKING VIA THE AUTOMATIC CONTROL. THE CAROUSEL CONSISTS IN PARTICULAR OF: OUTSOURCING TRAIN, CONSISTING OF: -THE STEEL FOOT PLATES AND ANCHORS, DIRECTLY ON THE GROUND TURNED OFF AND INTEGRATED INTO THE SHELF, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPEZIALGLEITEM, AS WELL AS THE LATERAL GUIDE -THE GRIPPER MECHANISM, WHICH CONTAINS THE TAPE AND TRANSPORTED TO THE NEXT POSITION POSITIVELY THE GEAR MOTOR WITH CHAIN, THE SPROCKET WHEELS AND THE CHAIN GUIDE CROSS CONVEYOR BELT, COMPRISING; -TWO CASSETTE COURSES, ONE OF THEM AS WORK PROVIDED -THE STEEL CONSTRUCTION INCL. FOOT PLATES AND ANCHORS, PLACED DIRECTLY ON THE FLOOR, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPECIAL GLIDERS, AS WELL AS THE LATERAL GUIDE -THE QUERVERSCHIEBEBALKEN AS A DRIVER FOR THE CASSETTES -THE DRIVE MOTOR WITH THE REQUIRED DRIVE ELEMENTS -THE MECHANICAL PREPARATIONS FOR THE LOAD CELLS INSTALLATION AT THE WORKPLACE STORAGE CAR, RUNNING SUCH AS PAGING RAILWAY ELECTRICAL CONTROL CONSISTING OF: -THE CONTROL PANEL WITH PUSH BUTTONS FOR ALL INDIVIDUAL MOVEMENTS, INCLUDING ON/OFF BUTTON AND EMERGENCY PUSH BUTTON -THE POSITION AND CONTROL SWITCHES -POWER AND CONTROL SUPPLY -FIRMLY INSTALLED CONTROL CABINETS WITH BUILT-IN CONTROL -THE NECESSARY CABLES, AS WELL AS THE INTERNAL WIRING THE SAFETY LIGHT BARRIER INCL. MOUNTING BRACKETS, WHICH PERCEIVES THE PERSON PROTECTION DURING CARTRIDGE MOVEMENT CONDITION: USED, THE LAST MAINTENANCE WAS PERFORMED IN 2017, SHORTLY AFTER IT WAS MINED PROFESSIONALLY, SO THAT IT CAN BE REBUILT AT ANY TIME. THE COMPANY WHICH HAS DEGRADED THE PLANT COULD PERFORM THE INSTALLATION. AVAILABLE: AVAILABLE NOW LOCATION: NUREMBERG
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-amtec flowwrap f80-xl80gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 450mm | 1 pendular knife | 220v, 3.2kw | no compressed air required | max. speed of the machine in neutral: 80 cycles/min | max. bag (not product): dimensions (mm): l(120-450)xw(50-160)xh(10-80) | machine dimensions (mm): l4380xw870xh1500 | weight (net/gross): 960/1060kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F80-XL80GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 450MM | 1 PENDULAR KNIFE | 220V, 3.2KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 80 CYCLES/MIN | MAX. BAG (NOT PRODUCT): DIMENSIONS (MM): L(120-450)XW(50-160)XH(10-80) | MACHINE DIMENSIONS (MM): L4380XW870XH1500 | WEIGHT (NET/GROSS): 960/1060KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine for pet preforms, husky g 600 pet, year 2000
 
this is a complete preform production line from granule feeding to readymade pet bottle preform conveyor. the equipment was made by husky injection molding systems s. a. (spain) on year 2000 and started to manufacture in 2001. the human-machine interface is an ibm-compatible pc. the nominal capacity of 19000 preform with weight 44 gram for 1.5-liter pet bottles. neck format is light bpf . equipment is on good condition and ready for delivery.
 
the delivery includes:
- injection molding machine g 600 pet p120/130 e 140 husky
- dispenser of the dye mdt3/c piovan
- air conditioner piovan
- water circulation pump gp 1art 1x37 piovan
- vacuum pump f316 / 2 piovan
- granulate desiccant ds 531 piovan
- cooler rpn 1500 piovan
- in / out conveyors
- control instrumentation and control box
 
manufacturer: husky injection molding systems s. a.
manufacturers type: g 600 pet p/120/130 e140
manufacturer year: 2000
capacity: 19000 preforms/hour
number of molds: 96
current preform size: 44 grams for 1.5-liter pet
clamping force: 600 tons
clamping cycle time: 15 seconds
current neck format: light bpf   INJECTION MOLDING MACHINE FOR PET PREFORMS, HUSKY G 600 PET, YEAR 2000 THIS IS A COMPLETE PREFORM PRODUCTION LINE FROM GRANULE FEEDING TO READYMADE PET BOTTLE PREFORM CONVEYOR. THE EQUIPMENT WAS MADE BY HUSKY INJECTION MOLDING SYSTEMS S. A. (SPAIN) ON YEAR 2000 AND STARTED TO MANUFACTURE IN 2001. THE HUMAN-MACHINE INTERFACE IS AN IBM-COMPATIBLE PC. THE NOMINAL CAPACITY OF 19000 PREFORM WITH WEIGHT 44 GRAM FOR 1.5-LITER PET BOTTLES. NECK FORMAT IS LIGHT BPF . EQUIPMENT IS ON GOOD CONDITION AND READY FOR DELIVERY. THE DELIVERY INCLUDES: - INJECTION MOLDING MACHINE G 600 PET P120/130 E 140 HUSKY - DISPENSER OF THE DYE MDT3/C PIOVAN - AIR CONDITIONER PIOVAN - WATER CIRCULATION PUMP GP 1ART 1X37 PIOVAN - VACUUM PUMP F316 / 2 PIOVAN - GRANULATE DESICCANT DS 531 PIOVAN - COOLER RPN 1500 PIOVAN - IN / OUT CONVEYORS - CONTROL INSTRUMENTATION AND CONTROL BOX MANUFACTURER: HUSKY INJECTION MOLDING SYSTEMS S. A. MANUFACTURERS TYPE: G 600 PET P/120/130 E140 MANUFACTURER YEAR: 2000 CAPACITY: 19000 PREFORMS/HOUR NUMBER OF MOLDS: 96 CURRENT PREFORM SIZE: 44 GRAMS FOR 1.5-LITER PET CLAMPING FORCE: 600 TONS CLAMPING CYCLE TIME: 15 SECONDS CURRENT NECK FORMAT: LIGHT BPF
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine 4-side shape sh30<br><br>pro-version high performance vertical packaging machine for shaped bags (4-side-sealing). - omron plc, interactive lcd touch panel display, automatic program-set-up, mark sensor, quick-change format unit, servomotor-sealing unit, schneider servomotor for film transport with vacuum-belts. - stainless steel (ss304) version including hot printer (production date, etc.). <br><br>- specifications: bag sizes: l(30-110)xw(30-90) | max. speed of the machine in neutral: 30 cycles/minute | 220v/3.0kw | 6bar, 0,55m³/min | machine dimensions: l1464xw1233xh1377mm | weight. 400kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE 4-SIDE SHAPE SH30

PRO-VERSION HIGH PERFORMANCE VERTICAL PACKAGING MACHINE FOR SHAPED BAGS (4-SIDE-SEALING). - OMRON PLC, INTERACTIVE LCD TOUCH PANEL DISPLAY, AUTOMATIC PROGRAM-SET-UP, MARK SENSOR, QUICK-CHANGE FORMAT UNIT, SERVOMOTOR-SEALING UNIT, SCHNEIDER SERVOMOTOR FOR FILM TRANSPORT WITH VACUUM-BELTS. - STAINLESS STEEL (SS304) VERSION INCLUDING HOT PRINTER (PRODUCTION DATE, ETC.).

- SPECIFICATIONS: BAG SIZES: L(30-110)XW(30-90) | MAX. SPEED OF THE MACHINE IN NEUTRAL: 30 CYCLES/MINUTE | 220V/3.0KW | 6BAR, 0,55M³/MIN | MACHINE DIMENSIONS: L1464XW1233XH1377MM | WEIGHT. 400KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-waterjet - cutting machine, year 2017 as new
milling spindle, 2 heads, changing tables

3,800 bar - for cutting foams, plastics, textile, leather, cardboard, etc.

make: expert systems technology / thyssen uhde
type: cutexpert variojet
year of constr.: 2017

work area: 2,000 x 1.600 mm
max material thickness: 100 mm
rapid traverse max: 60 m / min
cutting nozzle diameter: 0.08 - 0.20 mm high pressure pump
make: uhde thyssenkrupp
type: hps 4022
pressure max: 3,800 bar
power: 22 kw

milling spindle
make: jã¤ger
maximum speed: 30,000 rpm

equipment / options:
-2 heads, 1 x with a milling spindle
-changing tables
-tables designed with va honeycomb elements
-including bagging filter
-including mobile compressor (metabo)
--program controlled height adjustment
-dxf import module
-nesting software module
-software module material database

footprint approximately: b = approx. 9 x 4 m, weight: 3500 kg

condition:
almost as good as new machine, comes from insolventem operation. 
delivered 10/2017, only about a year in operation.

price:
new price = (without installation) 232,000,-â?¬
requirement, net, from location north rhine-westphalia / germany
 WATERJET - CUTTING MACHINE, YEAR 2017 AS NEW MILLING SPINDLE, 2 HEADS, CHANGING TABLES 3,800 BAR - FOR CUTTING FOAMS, PLASTICS, TEXTILE, LEATHER, CARDBOARD, ETC. MAKE: EXPERT SYSTEMS TECHNOLOGY / THYSSEN UHDE TYPE: CUTEXPERT VARIOJET YEAR OF CONSTR.: 2017 WORK AREA: 2,000 X 1.600 MM MAX MATERIAL THICKNESS: 100 MM RAPID TRAVERSE MAX: 60 M / MIN CUTTING NOZZLE DIAMETER: 0.08 - 0.20 MM HIGH PRESSURE PUMP MAKE: UHDE THYSSENKRUPP TYPE: HPS 4022 PRESSURE MAX: 3,800 BAR POWER: 22 KW MILLING SPINDLE MAKE: J&ATILDE;&CURREN;GER MAXIMUM SPEED: 30,000 RPM EQUIPMENT / OPTIONS: -2 HEADS, 1 X WITH A MILLING SPINDLE -CHANGING TABLES -TABLES DESIGNED WITH VA HONEYCOMB ELEMENTS -INCLUDING BAGGING FILTER -INCLUDING MOBILE COMPRESSOR (METABO) --PROGRAM CONTROLLED HEIGHT ADJUSTMENT -DXF IMPORT MODULE -NESTING SOFTWARE MODULE -SOFTWARE MODULE MATERIAL DATABASE FOOTPRINT APPROXIMATELY: B = APPROX. 9 X 4 M, WEIGHT: 3500 KG CONDITION: ALMOST AS GOOD AS NEW MACHINE, COMES FROM INSOLVENTEM OPERATION. DELIVERED 10/2017, ONLY ABOUT A YEAR IN OPERATION. PRICE: NEW PRICE = (WITHOUT INSTALLATION) 232,000,-&ACIRC;?&NOT; REQUIREMENT, NET, FROM LOCATION NORTH RHINE-WESTPHALIA / GERMANY
Vendedor: 5m+ GmbH
Año de construcción: usado
Ubicación: Land-amtec shrinktunnel-pof-l (high speed)<br><br>shrinktunnel suitable to be combined with amtec shrink wrapper speed shrink 35l. high speed shrinking with 0-20 m/min for pof (polyolefin) film. <br><br>- specifications: max. packaging size: l(customized)xw550xh250mm | tunnel size: l1500xw650xh300mm | power: 380v, max. 18kw | machine dimensions and weight: l1800xw1140xh1300mm, 700kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINKTUNNEL-POF-L (HIGH SPEED)

SHRINKTUNNEL SUITABLE TO BE COMBINED WITH AMTEC SHRINK WRAPPER SPEED SHRINK 35L. HIGH SPEED SHRINKING WITH 0-20 M/MIN FOR POF (POLYOLEFIN) FILM.

- SPECIFICATIONS: MAX. PACKAGING SIZE: L(CUSTOMIZED)XW550XH250MM | TUNNEL SIZE: L1500XW650XH300MM | POWER: 380V, MAX. 18KW | MACHINE DIMENSIONS AND WEIGHT: L1800XW1140XH1300MM, 700KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-waterjet - cutting machine, year 2017 as new
milling spindle, 2 heads, changing tables

3,800 bar - for cutting foams, plastics, textile, leather, cardboard, etc.

make: expert systems technology / thyssen uhde
type: cutexpert variojet
year of constr.: 2017

work area: 2,000 x 1.600 mm
max material thickness: 100 mm
rapid traverse max: 60 m / min
cutting nozzle diameter: 0.08 - 0.20 mm high pressure pump
make: uhde thyssenkrupp
type: hps 4022
pressure max: 3,800 bar
power: 22 kw

milling spindle
make: jã¤ger
maximum speed: 30,000 rpm

equipment / options:
-2 heads, 1 x with a milling spindle
-changing tables
-tables designed with va honeycomb elements
-including bagging filter
-including mobile compressor (metabo)
--program controlled height adjustment
-dxf import module
-nesting software module
-software module material database

footprint approximately: b = approx. 9 x 4 m, weight: 3500 kg

condition:
almost as good as new machine, comes from insolventem operation. 
delivered 10/2017, only about a year in operation.

price:
new price = (without installation) 232,000,-â?¬
requirement, net, from location north rhine-westphalia / germany
 WATERJET - CUTTING MACHINE, YEAR 2017 AS NEW MILLING SPINDLE, 2 HEADS, CHANGING TABLES 3,800 BAR - FOR CUTTING FOAMS, PLASTICS, TEXTILE, LEATHER, CARDBOARD, ETC. MAKE: EXPERT SYSTEMS TECHNOLOGY / THYSSEN UHDE TYPE: CUTEXPERT VARIOJET YEAR OF CONSTR.: 2017 WORK AREA: 2,000 X 1.600 MM MAX MATERIAL THICKNESS: 100 MM RAPID TRAVERSE MAX: 60 M / MIN CUTTING NOZZLE DIAMETER: 0.08 - 0.20 MM HIGH PRESSURE PUMP MAKE: UHDE THYSSENKRUPP TYPE: HPS 4022 PRESSURE MAX: 3,800 BAR POWER: 22 KW MILLING SPINDLE MAKE: J&ATILDE;&CURREN;GER MAXIMUM SPEED: 30,000 RPM EQUIPMENT / OPTIONS: -2 HEADS, 1 X WITH A MILLING SPINDLE -CHANGING TABLES -TABLES DESIGNED WITH VA HONEYCOMB ELEMENTS -INCLUDING BAGGING FILTER -INCLUDING MOBILE COMPRESSOR (METABO) --PROGRAM CONTROLLED HEIGHT ADJUSTMENT -DXF IMPORT MODULE -NESTING SOFTWARE MODULE -SOFTWARE MODULE MATERIAL DATABASE FOOTPRINT APPROXIMATELY: B = APPROX. 9 X 4 M, WEIGHT: 3500 KG CONDITION: ALMOST AS GOOD AS NEW MACHINE, COMES FROM INSOLVENTEM OPERATION. DELIVERED 10/2017, ONLY ABOUT A YEAR IN OPERATION. PRICE: NEW PRICE = (WITHOUT INSTALLATION) 232,000,-&ACIRC;?&NOT; REQUIREMENT, NET, FROM LOCATION NORTH RHINE-WESTPHALIA / GERMANY
Vendedor: 5m+ GmbH
Año de construcción: usado
Ubicación: Land-amtec flowwrap f80-2xl80gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 600mm | 1 pendular knife | 220v, 3.6kw | no compressed air required | max. speed of the machine in neutral: 80 cycles/min | max. bag (not product) dimensions (mm): l(120-450)xw(50-200)xh(10-80) | machine dimensions (mm): l4380xw970xh1500 | weight (net/gross): 1160/1260kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F80-2XL80GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 600MM | 1 PENDULAR KNIFE | 220V, 3.6KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 80 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(120-450)XW(50-200)XH(10-80) | MACHINE DIMENSIONS (MM): L4380XW970XH1500 | WEIGHT (NET/GROSS): 1160/1260KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-waterjet - cutting machine, year 2017 as new
milling spindle, 2 heads, changing tables

3,800 bar - for cutting foams, plastics, textile, leather, cardboard, etc.

make: expert systems technology / thyssen uhde
type: cutexpert variojet
year of constr.: 2017

work area: 2,000 x 1.600 mm
max material thickness: 100 mm
rapid traverse max: 60 m / min
cutting nozzle diameter: 0.08 - 0.20 mm high pressure pump
make: uhde thyssenkrupp
type: hps 4022
pressure max: 3,800 bar
power: 22 kw

milling spindle
make: jã¤ger
maximum speed: 30,000 rpm

equipment / options:
-2 heads, 1 x with a milling spindle
-changing tables
-tables designed with va honeycomb elements
-including bagging filter
-including mobile compressor (metabo)
--program controlled height adjustment
-dxf import module
-nesting software module
-software module material database

footprint approximately: b = approx. 9 x 4 m, weight: 3500 kg

condition:
almost as good as new machine, comes from insolventem operation. 
delivered 10/2017, only about a year in operation.

price:
new price = (without installation) 232,000,-â?¬
requirement, net, from location north rhine-westphalia / germany
 WATERJET - CUTTING MACHINE, YEAR 2017 AS NEW MILLING SPINDLE, 2 HEADS, CHANGING TABLES 3,800 BAR - FOR CUTTING FOAMS, PLASTICS, TEXTILE, LEATHER, CARDBOARD, ETC. MAKE: EXPERT SYSTEMS TECHNOLOGY / THYSSEN UHDE TYPE: CUTEXPERT VARIOJET YEAR OF CONSTR.: 2017 WORK AREA: 2,000 X 1.600 MM MAX MATERIAL THICKNESS: 100 MM RAPID TRAVERSE MAX: 60 M / MIN CUTTING NOZZLE DIAMETER: 0.08 - 0.20 MM HIGH PRESSURE PUMP MAKE: UHDE THYSSENKRUPP TYPE: HPS 4022 PRESSURE MAX: 3,800 BAR POWER: 22 KW MILLING SPINDLE MAKE: J&ATILDE;&CURREN;GER MAXIMUM SPEED: 30,000 RPM EQUIPMENT / OPTIONS: -2 HEADS, 1 X WITH A MILLING SPINDLE -CHANGING TABLES -TABLES DESIGNED WITH VA HONEYCOMB ELEMENTS -INCLUDING BAGGING FILTER -INCLUDING MOBILE COMPRESSOR (METABO) --PROGRAM CONTROLLED HEIGHT ADJUSTMENT -DXF IMPORT MODULE -NESTING SOFTWARE MODULE -SOFTWARE MODULE MATERIAL DATABASE FOOTPRINT APPROXIMATELY: B = APPROX. 9 X 4 M, WEIGHT: 3500 KG CONDITION: ALMOST AS GOOD AS NEW MACHINE, COMES FROM INSOLVENTEM OPERATION. DELIVERED 10/2017, ONLY ABOUT A YEAR IN OPERATION. PRICE: NEW PRICE = (WITHOUT INSTALLATION) 232,000,-&ACIRC;?&NOT; REQUIREMENT, NET, FROM LOCATION NORTH RHINE-WESTPHALIA / GERMANY
Vendedor: 5m+ GmbH
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine 4-side / fin-seal shape sh40<br><br>pro-version high performance vertical packaging machine for shaped bags (fin- or 4-side-seal, to be decided in advance). omron plc, interactive lcd touch panel display, automatic program-set-up, mark sensor, quick-change format unit, servomotor-sealing unit, schneider servomotor for film transport with vacuum-belts. stainless steel (ss304) version including hot printer (production date, etc.). specifications: bag sizes: l(30-180)xw(30-60)mm | max. speed of the machine in neutral: 40 cycles/minute | 220v/2.5kw | 6bar, 0.55m³/min | machine dimensions: l1464xw1233xh1377mm | weight: 350kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE 4-SIDE / FIN-SEAL SHAPE SH40

PRO-VERSION HIGH PERFORMANCE VERTICAL PACKAGING MACHINE FOR SHAPED BAGS (FIN- OR 4-SIDE-SEAL, TO BE DECIDED IN ADVANCE). OMRON PLC, INTERACTIVE LCD TOUCH PANEL DISPLAY, AUTOMATIC PROGRAM-SET-UP, MARK SENSOR, QUICK-CHANGE FORMAT UNIT, SERVOMOTOR-SEALING UNIT, SCHNEIDER SERVOMOTOR FOR FILM TRANSPORT WITH VACUUM-BELTS. STAINLESS STEEL (SS304) VERSION INCLUDING HOT PRINTER (PRODUCTION DATE, ETC.). SPECIFICATIONS: BAG SIZES: L(30-180)XW(30-60)MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 40 CYCLES/MINUTE | 220V/2.5KW | 6BAR, 0.55M³/MIN | MACHINE DIMENSIONS: L1464XW1233XH1377MM | WEIGHT: 350KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-waterjet - cutting machine, year 2017 as new
milling spindle, 2 heads, changing tables

3,800 bar - for cutting foams, plastics, textile, leather, cardboard, etc.

make: expert systems technology / thyssen uhde
type: cutexpert variojet
year of constr.: 2017

work area: 2,000 x 1.600 mm
max material thickness: 100 mm
rapid traverse max: 60 m / min
cutting nozzle diameter: 0.08 - 0.20 mm high pressure pump
make: uhde thyssenkrupp
type: hps 4022
pressure max: 3,800 bar
power: 22 kw

milling spindle
make: jã¤ger
maximum speed: 30,000 rpm

equipment / options:
-2 heads, 1 x with a milling spindle
-changing tables
-tables designed with va honeycomb elements
-including bagging filter
-including mobile compressor (metabo)
--program controlled height adjustment
-dxf import module
-nesting software module
-software module material database

footprint approximately: b = approx. 9 x 4 m, weight: 3500 kg

condition:
almost as good as new machine, comes from insolventem operation. 
delivered 10/2017, only about a year in operation.

price:
new price = (without installation) 232,000,-â?¬
requirement, net, from location north rhine-westphalia / germany
 WATERJET - CUTTING MACHINE, YEAR 2017 AS NEW MILLING SPINDLE, 2 HEADS, CHANGING TABLES 3,800 BAR - FOR CUTTING FOAMS, PLASTICS, TEXTILE, LEATHER, CARDBOARD, ETC. MAKE: EXPERT SYSTEMS TECHNOLOGY / THYSSEN UHDE TYPE: CUTEXPERT VARIOJET YEAR OF CONSTR.: 2017 WORK AREA: 2,000 X 1.600 MM MAX MATERIAL THICKNESS: 100 MM RAPID TRAVERSE MAX: 60 M / MIN CUTTING NOZZLE DIAMETER: 0.08 - 0.20 MM HIGH PRESSURE PUMP MAKE: UHDE THYSSENKRUPP TYPE: HPS 4022 PRESSURE MAX: 3,800 BAR POWER: 22 KW MILLING SPINDLE MAKE: J&ATILDE;&CURREN;GER MAXIMUM SPEED: 30,000 RPM EQUIPMENT / OPTIONS: -2 HEADS, 1 X WITH A MILLING SPINDLE -CHANGING TABLES -TABLES DESIGNED WITH VA HONEYCOMB ELEMENTS -INCLUDING BAGGING FILTER -INCLUDING MOBILE COMPRESSOR (METABO) --PROGRAM CONTROLLED HEIGHT ADJUSTMENT -DXF IMPORT MODULE -NESTING SOFTWARE MODULE -SOFTWARE MODULE MATERIAL DATABASE FOOTPRINT APPROXIMATELY: B = APPROX. 9 X 4 M, WEIGHT: 3500 KG CONDITION: ALMOST AS GOOD AS NEW MACHINE, COMES FROM INSOLVENTEM OPERATION. DELIVERED 10/2017, ONLY ABOUT A YEAR IN OPERATION. PRICE: NEW PRICE = (WITHOUT INSTALLATION) 232,000,-&ACIRC;?&NOT; REQUIREMENT, NET, FROM LOCATION NORTH RHINE-WESTPHALIA / GERMANY
Vendedor: 5m+ GmbH
Año de construcción: usado
Ubicación: Land-amtec shrinktunnel-pof-xl (high speed)<br><br>shrinktunnel suitable to be combined with amtec shrink wrapper speed shrink 35xl. high speed shrinking with 0-20 m/min for pof (polyolefin) film. <br><br>- specifications: max. packaging size: l(customized)xw700xh250mm | tunnel size: l1500xw800xh300mm, power: 380v, max. 20kw | machine dimensions and weight: l1800xw1290xh1300mm, 750kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINKTUNNEL-POF-XL (HIGH SPEED)

SHRINKTUNNEL SUITABLE TO BE COMBINED WITH AMTEC SHRINK WRAPPER SPEED SHRINK 35XL. HIGH SPEED SHRINKING WITH 0-20 M/MIN FOR POF (POLYOLEFIN) FILM.

- SPECIFICATIONS: MAX. PACKAGING SIZE: L(CUSTOMIZED)XW700XH250MM | TUNNEL SIZE: L1500XW800XH300MM, POWER: 380V, MAX. 20KW | MACHINE DIMENSIONS AND WEIGHT: L1800XW1290XH1300MM, 750KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 17.000 €
Ubicación: Land-machine type machining center - vertical make fanuc stama type robodrill alfa t 14 ia year 2000 control type cnc storage france country of origin japan delivery after agreement cargo base ex work technical details

travel: x 700 y 360 z330mm control: fanuc 18 i - m y path 360 mm z-way 330 mm x way 7000 mm table size 800 x 400 mm speed range - milling 15000 rpm power - milling spindle 7.5 of kw spindle taper bt 30 number of tools in magazine 14 pieces before the chubbereich 1-25000 mm / min rapid traverse - longitudinal/transverse/vertical 36 m / min total power consumption 10 kw machine weight approx. 2200 kg space requirement approx. 2000 x 2400 x 2600 mm accessories coolant system lubrication full protection - panel rs 232 - interface komp lette machine documentation work light electronic handwheel additional information

good machine
 fanuc 18 in the
 15000 rpm
 bt 30
 atc 14 tray
 with internal coolant
 filter systems
 hydraulick
 automatic door  MACHINE TYPE MACHINING CENTER - VERTICAL MAKE FANUC STAMA TYPE ROBODRILL ALFA T 14 IA YEAR 2000 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN JAPAN DELIVERY AFTER AGREEMENT CARGO BASE EX WORK TECHNICAL DETAILS TRAVEL: X 700 Y 360 Z330MM CONTROL: FANUC 18 I - M Y PATH 360 MM Z-WAY 330 MM X WAY 7000 MM TABLE SIZE 800 X 400 MM SPEED RANGE - MILLING 15000 RPM POWER - MILLING SPINDLE 7.5 OF KW SPINDLE TAPER BT 30 NUMBER OF TOOLS IN MAGAZINE 14 PIECES BEFORE THE CHUBBEREICH 1-25000 MM / MIN RAPID TRAVERSE - LONGITUDINAL/TRANSVERSE/VERTICAL 36 M / MIN TOTAL POWER CONSUMPTION 10 KW MACHINE WEIGHT APPROX. 2200 KG SPACE REQUIREMENT APPROX. 2000 X 2400 X 2600 MM ACCESSORIES COOLANT SYSTEM LUBRICATION FULL PROTECTION - PANEL RS 232 - INTERFACE KOMP LETTE MACHINE DOCUMENTATION WORK LIGHT ELECTRONIC HANDWHEEL ADDITIONAL INFORMATION GOOD MACHINE FANUC 18 IN THE 15000 RPM BT 30 ATC 14 TRAY WITH INTERNAL COOLANT FILTER SYSTEMS HYDRAULICK AUTOMATIC DOOR
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-amtec flowwrap f120-l60bp - 1 pendular knife - bottom film feed<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, medium/larger products. infeed table with automatic transport through pushers into the machine. film supply from the bottom for product with low stability, with humidity or some stickiness (to be tested/confirmed). automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 350mm | 1 pendular knife | 220v, 2.4kw | no compressed air required | max. speed of the machine in neutral: 120 cycles/min | max. bag (not product) dimensions (mm): l(110-330)xw(30-130)xh(10-60) | machine dimensions (mm): l3670xw820xh1410 | weight (net/gross): 800/850kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F120-L60BP - 1 PENDULAR KNIFE - BOTTOM FILM FEED

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, MEDIUM/LARGER PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. FILM SUPPLY FROM THE BOTTOM FOR PRODUCT WITH LOW STABILITY, WITH HUMIDITY OR SOME STICKINESS (TO BE TESTED/CONFIRMED). AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 350MM | 1 PENDULAR KNIFE | 220V, 2.4KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 120 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(110-330)XW(30-130)XH(10-60) | MACHINE DIMENSIONS (MM): L3670XW820XH1410 | WEIGHT (NET/GROSS): 800/850KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-empty bottle inspector heuft inline ebi with reflexx and spectrum units

the machine was installed in year 2007 and its currently in very good operational condition, it has been last serviced and can be demonstrated to customers. the capacity is 60 000 bph. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. it has complete heuft manuals in english

this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.

sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.

the ebi has optical heuft thread detection system which inspects the screw closure finish on a glass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.

this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.

technical data:
manufacturer: heuft gmbh, germany
year: 9/2007
type: heuft inline ebi with reflexx image processing
model: h8 bsxt b 72
capacity: 60 000 bph
reliability: 99.9 % detection complete heuft manuals in english. this unit can be sold to the market.
total operating hours 12750
total on duty hours 27500   EMPTY BOTTLE INSPECTOR HEUFT INLINE EBI WITH REFLEXX AND SPECTRUM UNITS THE MACHINE WAS INSTALLED IN YEAR 2007 AND ITS CURRENTLY IN VERY GOOD OPERATIONAL CONDITION, IT HAS BEEN LAST SERVICED AND CAN BE DEMONSTRATED TO CUSTOMERS. THE CAPACITY IS 60 000 BPH. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. IT HAS COMPLETE HEUFT MANUALS IN ENGLISH THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON A GLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 9/2007 TYPE: HEUFT INLINE EBI WITH REFLEXX IMAGE PROCESSING MODEL: H8 BSXT B 72 CAPACITY: 60 000 BPH RELIABILITY: 99.9 % DETECTION COMPLETE HEUFT MANUALS IN ENGLISH. THIS UNIT CAN BE SOLD TO THE MARKET. TOTAL OPERATING HOURS 12750 TOTAL ON DUTY HOURS 27500
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine 4-side / round sealiing rd30<br><br>pro-version high performance vertical packaging machine with dual film supply (two film rolls) for round- or 4-side-sealiing of larger bags. - omron plc, interactive lcd touch panel display, automatic program-set-up, mark sensor, quick-change format unit, servomotor-sealing unit, schneider servomotor for film transport with vacuum-belts. no format tool needed to form the bags. stainless steel (ss304) version including hot printer (production date, etc.). <br><br>- specifications: bag sizes: l(50-200)xw(50-175)mm | max. speed of the machine in neutral: 30 cycles/min | 220v/3.5kw | 6bar, 0.55m³/min | machine dimensions: l977xw1630xh1566mm | weight: 450kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE 4-SIDE / ROUND SEALIING RD30

PRO-VERSION HIGH PERFORMANCE VERTICAL PACKAGING MACHINE WITH DUAL FILM SUPPLY (TWO FILM ROLLS) FOR ROUND- OR 4-SIDE-SEALIING OF LARGER BAGS. - OMRON PLC, INTERACTIVE LCD TOUCH PANEL DISPLAY, AUTOMATIC PROGRAM-SET-UP, MARK SENSOR, QUICK-CHANGE FORMAT UNIT, SERVOMOTOR-SEALING UNIT, SCHNEIDER SERVOMOTOR FOR FILM TRANSPORT WITH VACUUM-BELTS. NO FORMAT TOOL NEEDED TO FORM THE BAGS. STAINLESS STEEL (SS304) VERSION INCLUDING HOT PRINTER (PRODUCTION DATE, ETC.).

- SPECIFICATIONS: BAG SIZES: L(50-200)XW(50-175)MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 30 CYCLES/MIN | 220V/3.5KW | 6BAR, 0.55M³/MIN | MACHINE DIMENSIONS: L977XW1630XH1566MM | WEIGHT: 450KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 850 €
Ubicación: Land-laser aiming device of ge medical systems, model: a117142-5837, year: 2006.
(more details on request).

the mismatch?
we have other medical equipment in the warehouse, simply make a request.
greetings LASER AIMING DEVICE OF GE MEDICAL SYSTEMS, MODEL: A117142-5837, YEAR: 2006. (MORE DETAILS ON REQUEST). THE MISMATCH? WE HAVE OTHER MEDICAL EQUIPMENT IN THE WAREHOUSE, SIMPLY MAKE A REQUEST. GREETINGS
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Ubicación: Land-amtec shrinktunnel-pof-m (high speed)<br><br>shrinktunnel suitable to be combined with amtec shrink wrapper speed shrink 35m. high speed shrinking with 0-20 m/min for pof (polyolefin) film. <br><br>- specifications: max. packaging size: l(customized)xw400xh250mm | tunnel size: l1500xw500xh300mm | power: 380v, max. 16kw | machine dimensions and weight: l1800xw990xh1300mm, 650kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINKTUNNEL-POF-M (HIGH SPEED)

SHRINKTUNNEL SUITABLE TO BE COMBINED WITH AMTEC SHRINK WRAPPER SPEED SHRINK 35M. HIGH SPEED SHRINKING WITH 0-20 M/MIN FOR POF (POLYOLEFIN) FILM.

- SPECIFICATIONS: MAX. PACKAGING SIZE: L(CUSTOMIZED)XW400XH250MM | TUNNEL SIZE: L1500XW500XH300MM | POWER: 380V, MAX. 16KW | MACHINE DIMENSIONS AND WEIGHT: L1800XW990XH1300MM, 650KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-this inline heuft ebi was made in year 2007 and relocated in 2011. today it is still installed but not in use nor connected to the power. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. the capacity of this inline ebi is min 50 000 bph and equipment is in very good condition.

this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.

sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.

the ebi has optical heuft thread detection system which inspects the screw closure finish on aglass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.

this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.

technical data:
manufacturer: heuft gmbh, germany
year: 2007
type: heuft inline ebi with reflexx image processing
capacity: up to 70 000 bph
reliability: 99.9 % detection   THIS INLINE HEUFT EBI WAS MADE IN YEAR 2007 AND RELOCATED IN 2011. TODAY IT IS STILL INSTALLED BUT NOT IN USE NOR CONNECTED TO THE POWER. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. THE CAPACITY OF THIS INLINE EBI IS MIN 50 000 BPH AND EQUIPMENT IS IN VERY GOOD CONDITION. THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON AGLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 2007 TYPE: HEUFT INLINE EBI WITH REFLEXX IMAGE PROCESSING CAPACITY: UP TO 70 000 BPH RELIABILITY: 99.9 % DETECTION
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec flowwrap f120-l60gp - 1 pendular knife - guiding device<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 350mm | 1 pendular knife | 220v, 2.4kw | no compressed air required | max. speed of the machine in neutral: 120 cycles/min | max. bag (not product) dimensions (mm): l(110-330)xw(30-130)xh(10-60) | machine dimensions (mm): l3670xw820xh1410 | weight (net/gross): 800/850kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F120-L60GP - 1 PENDULAR KNIFE - GUIDING DEVICE

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 350MM | 1 PENDULAR KNIFE | 220V, 2.4KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 120 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(110-330)XW(30-130)XH(10-60) | MACHINE DIMENSIONS (MM): L3670XW820XH1410 | WEIGHT (NET/GROSS): 800/850KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-including vibrating motor and hood for connection to a bannister animal press

without fan
 INCLUDING VIBRATING MOTOR AND HOOD FOR CONNECTION TO A BANNISTER ANIMAL PRESS WITHOUT FAN
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine 4-side / round sealing rd50<br><br>pro-version high performance vertical packaging machine with dual film supply (two film rolls) for round- or 4-side-sealiing of smaller bags. omron plc, interactive lcd touch panel display, automatic program-set-up, mark sensor, quick-change format unit, servomotor-sealing unit, schneider servomotor for film transport with vacuum-belts. no format tool needed to form the bags. stainless steel (ss304) version including hot printer (production date, etc.). <br><br>- specifications: bag sizes: l(20-100)xw(20-80)mm | max. speed of the machine in neutral: 50 cycles/minute | 220v/2.5kw | 6bar, 0.55m³/min | machine dimensions: l977xw1630xh1566mm | weight: 350kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE 4-SIDE / ROUND SEALING RD50

PRO-VERSION HIGH PERFORMANCE VERTICAL PACKAGING MACHINE WITH DUAL FILM SUPPLY (TWO FILM ROLLS) FOR ROUND- OR 4-SIDE-SEALIING OF SMALLER BAGS. OMRON PLC, INTERACTIVE LCD TOUCH PANEL DISPLAY, AUTOMATIC PROGRAM-SET-UP, MARK SENSOR, QUICK-CHANGE FORMAT UNIT, SERVOMOTOR-SEALING UNIT, SCHNEIDER SERVOMOTOR FOR FILM TRANSPORT WITH VACUUM-BELTS. NO FORMAT TOOL NEEDED TO FORM THE BAGS. STAINLESS STEEL (SS304) VERSION INCLUDING HOT PRINTER (PRODUCTION DATE, ETC.).

- SPECIFICATIONS: BAG SIZES: L(20-100)XW(20-80)MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 50 CYCLES/MINUTE | 220V/2.5KW | 6BAR, 0.55M³/MIN | MACHINE DIMENSIONS: L977XW1630XH1566MM | WEIGHT: 350KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)