554 ofertas

Año de construcción: usado
Ubicación: Land-volume flow: 1040dm³/min, motor power: 7.5kw, operational hours: ca. 7000h.  VOLUME FLOW: 1040DM³/MIN, MOTOR POWER: 7.5KW, OPERATIONAL HOURS: CA. 7000H.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-useful width: 1300 mm<br/>panel thickness: 3 - 80 mm<br/>1 x wide belt with segmented pad, belt sizes 2620 x 1350 mm, belt speed 0,5 - 20 m/s, motor 22 kw<br/>1 x wide belt with segmented pad, belt sizes 2620 x 1350 mm, belt speed 0,5 - 20 m/s, motor 22 kw<br/>1 x brush, diameter 150 mm, fibres, motor 1,5 kw<br/>1 x ea dust cleaning machine, roller transport, high speed air cleaning with ionisation removing electrostatic dust<br/>operational side at the right<br/>feed speed 8 - 40 m/min<br/>fixed working height 880 mm USEFUL WIDTH: 1300 MM
PANEL THICKNESS: 3 - 80 MM
1 X WIDE BELT WITH SEGMENTED PAD, BELT SIZES 2620 X 1350 MM, BELT SPEED 0,5 - 20 M/S, MOTOR 22 KW
1 X WIDE BELT WITH SEGMENTED PAD, BELT SIZES 2620 X 1350 MM, BELT SPEED 0,5 - 20 M/S, MOTOR 22 KW
1 X BRUSH, DIAMETER 150 MM, FIBRES, MOTOR 1,5 KW
1 X EA DUST CLEANING MACHINE, ROLLER TRANSPORT, HIGH SPEED AIR CLEANING WITH IONISATION REMOVING ELECTROSTATIC DUST
OPERATIONAL SIDE AT THE RIGHT
FEED SPEED 8 - 40 M/MIN
FIXED WORKING HEIGHT 880 MM
Vendedor: Vebim
Año de construcción: usado
Precio: 140.000 €
Ubicación: Land-description:
continuous high-efficiency conveyor furnace(electric heated)
heat treatment - hardening, cementation,improvement, carbonitriding
total lenght 13m , 6m low and 7m high tempearture zone(3x117kw power with 3
carbon sensor probes)
oil and water thub
capacity - improvement 600kg/h  ; cementation (0,3-0,4mm) 300kg/h

condition: 6months used (the company terminated), practicly new
investment to operational state: 30 heating unit sets (tube + heater) and
a little more 
 

  DESCRIPTION: CONTINUOUS HIGH-EFFICIENCY CONVEYOR FURNACE(ELECTRIC HEATED) HEAT TREATMENT - HARDENING, CEMENTATION,IMPROVEMENT, CARBONITRIDING TOTAL LENGHT 13M , 6M LOW AND 7M HIGH TEMPEARTURE ZONE(3X117KW POWER WITH 3 CARBON SENSOR PROBES) OIL AND WATER THUB CAPACITY - IMPROVEMENT 600KG/H ; CEMENTATION (0,3-0,4MM) 300KG/H CONDITION: 6MONTHS USED (THE COMPANY TERMINATED), PRACTICLY NEW INVESTMENT TO OPERATIONAL STATE: 30 HEATING UNIT SETS (TUBE + HEATER) AND A LITTLE MORE
Vendedor: TEKER
Año de construcción: usado
Precio: used machinery auction RESALE 2.300 €
Ubicación: Land-weight approx.: 1300 kg<br/>dimensions (l x w x h) approx.: 5000 x 2300 x 2000 mm<br/>description: tÜv 07.03.2017, emission code b 04, cubic capacity 1368, power 57 kw, nominal load 775 kg, total weight max. 2040 kg, hinged doors at back, sliding door at side, belt lashing points available, the vehicle is currently non-operational (presumable battery is empty), mileage according to documentation approx. 150000 (last inspection at 150000), the vehicle has to be picked up by the customer in personal contribution. it will be deregistered WEIGHT APPROX.: 1300 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 2300 X 2000 MM
DESCRIPTION: TÜV 07.03.2017, EMISSION CODE B 04, CUBIC CAPACITY 1368, POWER 57 KW, NOMINAL LOAD 775 KG, TOTAL WEIGHT MAX. 2040 KG, HINGED DOORS AT BACK, SLIDING DOOR AT SIDE, BELT LASHING POINTS AVAILABLE, THE VEHICLE IS CURRENTLY NON-OPERATIONAL (PRESUMABLE BATTERY IS EMPTY), MILEAGE ACCORDING TO DOCUMENTATION APPROX. 150000 (LAST INSPECTION AT 150000), THE VEHICLE HAS TO BE PICKED UP BY THE CUSTOMER IN PERSONAL CONTRIBUTION. IT WILL BE DEREGISTERED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-<b>properties</b>

used belt conveyor of manufacturer trans standard
incl. motor
ideal for fast material handling
expertly disassembled and packed
condition: fully operational
6 stk. in stock

<b>belt conveyors</b>

the belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and woodworking machines. also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

<b>technical data:</b>

mass of the belt conveyor
overall length: 1,000 mm
total width: 1,030 mm
total width me engine: 1, 300 mm
height: 140mm

<b>information on the belt</b>
belt width: 900 mm
strap type: smooth aluminium frame <B>PROPERTIES</B> USED BELT CONVEYOR OF MANUFACTURER TRANS STANDARD INCL. MOTOR IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED CONDITION: FULLY OPERATIONAL 6 STK. IN STOCK <B>BELT CONVEYORS</B> THE BELT IS IDEAL TO DOVETAIL MACHINES OR JOBS IN THE PICKING ZONE AND TO OPTIMIZE THE INTERNAL PROCESS. TRANSPORTATION CAN FOSTER THE BELT CONVEYOR SENSITIVE AND DIFFERENT-SIZED CONTAINERS, BOXES OR OTHER PACKAGING AND ARTICLE UNITS TO THE TASK OR DELIVERY POINT AND, FOR EXAMPLE, ALSO SERVES AS A CONNECTING ROUTE BEFORE OR BETWEEN PRODUCTION AND WOODWORKING MACHINES. ALSO ENABLES EFFICIENT PARTS IN OPERATING AND STORAGE AND IS DESIGNED TO PROMOTE SIGNIFICANT FLOW RATES AND DISTANCES. <B>TECHNICAL DATA:</B> MASS OF THE BELT CONVEYOR OVERALL LENGTH: 1,000 MM TOTAL WIDTH: 1,030 MM TOTAL WIDTH ME ENGINE: 1, 300 MM HEIGHT: 140MM <B>INFORMATION ON THE BELT</B> BELT WIDTH: 900 MM STRAP TYPE: SMOOTH ALUMINIUM FRAME
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Ubicación: Land-manufacturer  unotech gmbh, niederlangen, germany<br/>typ 120 v5<br/>year of construction 2009<br/>press force main press 100 tons<br/>specific press force 145 n/m²<br/>max. cutting force 120 tons<br/>press force free stamper 25 tons<br/>feed channel 2.000 x 1.020 mm (l x w)<br/>capacity per cycle time 1,5 m³<br/>theoretic  throughput capacity 850 m³/h<br/>throughput capacity under operating conditions approx. 510 m³/hour<br/>bale size 1.100 x 750 mm (w x h)<br/>driving motor 2 x 75 kw with axial piston pumps<br/>connected load 160 kw<br/>rated current 280 a<br/>tying system 5-fold vertical, fully automatic<br/>throughput capacity at a<br/>bulk weight of 30 kg/cbm up to 15 tons/h<br/>bulk weight of 50 kg/cbm up to 25 tons/h<br/>bulk weight of 60 kg/cbm up to 30 tons/h<br/>bulk weight of 80 kg/cbm up to 40 tons/h<br/>bulk weight of 100 kg/cbm up to 50 tons/h<br/>bale weight 600 up to 900 kg, depends on material<br/>sps controller (manuf., type)  siemens s7 300<br/>operating panel (manuf., type)  siemens simatic<br/>baler dimensions built up with hopper 20,000 x 23,000 x 6,190 mm (l x w x h)<br/>transport dimensions only baler 13,630 x 2,350 x 3,130 mm (l x w x h)<br/>machine weight baler approx. 37 tons<br/><br/>accessories:<br/>4 pieces wire stations for a total of 10 pieces 500 kg wire coils (wire not included in the sales volume)<br/>1 piece bale slider<br/><br/>condition of the baler:<br/>the baler was operated almost exclusively with paper and cardboard, therefore the low wear and tear. the machine has been serviced regularly and is in a really good condition, ready for operation  and need not fear any comparison. uncompromising quality from germany with unique technical refinements distinguish this baler made by unotech.<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available. an inspection is possible by appointment. we will not assume liability for the given technical data and possible errors.<br/><br/>technical data conveyor belt:<br/>manufacturer unotech<br/>typ kth 1700<br/>year of construction 2009<br/>driving motor 5,5 kw<br/>length feeding conveyor 6,000 mm<br/>length elevating conveyor 10,233 mm<br/>length goose neck 1,500 mm<br/>grade 30°<br/>effecting width 1,625 mm<br/>height of side wall feeding conv. 500 mm<br/>height of side wall elevating conv. 1,000 mm<br/>transport dimensions over all<br/>feeding conveyor 7,000 x 2,200 x 1,200 mm (l x w x h)<br/>elevating conveyor 13,600 x 2,200 x 1,500 mm (l x w x h)<br/>pit dimensions (conveyor belt) 10,650 x 2,125 / 3,640 mm x 1,200 mm (l x w x h)<br/><br/>condition of the conveyor belt:<br/>the running rails, chains and the rubber belt are in a good and immediately operational condition.<br/><br/>accessories:<br/>pit cover MANUFACTURER UNOTECH GMBH, NIEDERLANGEN, GERMANY
TYP 120 V5
YEAR OF CONSTRUCTION 2009
PRESS FORCE MAIN PRESS 100 TONS
SPECIFIC PRESS FORCE 145 N/M²
MAX. CUTTING FORCE 120 TONS
PRESS FORCE FREE STAMPER 25 TONS
FEED CHANNEL 2.000 X 1.020 MM (L X W)
CAPACITY PER CYCLE TIME 1,5 M³
THEORETIC THROUGHPUT CAPACITY 850 M³/H
THROUGHPUT CAPACITY UNDER OPERATING CONDITIONS APPROX. 510 M³/HOUR
BALE SIZE 1.100 X 750 MM (W X H)
DRIVING MOTOR 2 X 75 KW WITH AXIAL PISTON PUMPS
CONNECTED LOAD 160 KW
RATED CURRENT 280 A
TYING SYSTEM 5-FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT CAPACITY AT A
BULK WEIGHT OF 30 KG/CBM UP TO 15 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 25 TONS/H
BULK WEIGHT OF 60 KG/CBM UP TO 30 TONS/H
BULK WEIGHT OF 80 KG/CBM UP TO 40 TONS/H
BULK WEIGHT OF 100 KG/CBM UP TO 50 TONS/H
BALE WEIGHT 600 UP TO 900 KG, DEPENDS ON MATERIAL
SPS CONTROLLER (MANUF., TYPE) SIEMENS S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC
BALER DIMENSIONS BUILT UP WITH HOPPER 20,000 X 23,000 X 6,190 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 13,630 X 2,350 X 3,130 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 37 TONS

ACCESSORIES:
4 PIECES WIRE STATIONS FOR A TOTAL OF 10 PIECES 500 KG WIRE COILS (WIRE NOT INCLUDED IN THE SALES VOLUME)
1 PIECE BALE SLIDER

CONDITION OF THE BALER:
THE BALER WAS OPERATED ALMOST EXCLUSIVELY WITH PAPER AND CARDBOARD, THEREFORE THE LOW WEAR AND TEAR. THE MACHINE HAS BEEN SERVICED REGULARLY AND IS IN A REALLY GOOD CONDITION, READY FOR OPERATION AND NEED NOT FEAR ANY COMPARISON. UNCOMPROMISING QUALITY FROM GERMANY WITH UNIQUE TECHNICAL REFINEMENTS DISTINGUISH THIS BALER MADE BY UNOTECH.

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. AN INSPECTION IS POSSIBLE BY APPOINTMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.

TECHNICAL DATA CONVEYOR BELT:
MANUFACTURER UNOTECH
TYP KTH 1700
YEAR OF CONSTRUCTION 2009
DRIVING MOTOR 5,5 KW
LENGTH FEEDING CONVEYOR 6,000 MM
LENGTH ELEVATING CONVEYOR 10,233 MM
LENGTH GOOSE NECK 1,500 MM
GRADE 30°
EFFECTING WIDTH 1,625 MM
HEIGHT OF SIDE WALL FEEDING CONV. 500 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 1,000 MM
TRANSPORT DIMENSIONS OVER ALL
FEEDING CONVEYOR 7,000 X 2,200 X 1,200 MM (L X W X H)
ELEVATING CONVEYOR 13,600 X 2,200 X 1,500 MM (L X W X H)
PIT DIMENSIONS (CONVEYOR BELT) 10,650 X 2,125 / 3,640 MM X 1,200 MM (L X W X H)

CONDITION OF THE CONVEYOR BELT:
THE RUNNING RAILS, CHAINS AND THE RUBBER BELT ARE IN A GOOD AND IMMEDIATELY OPERATIONAL CONDITION.

ACCESSORIES:
PIT COVER
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-<b>properties</b>

used belt conveyor of manufacturer trans standard
incl. motor
ideal for fast material handling
expertly disassembled and packed
condition: fully operational
6 stk. in stock

<b>belt conveyors</b>

the belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and woodworking machines. also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

<b>technical data:</b>

mass of the belt conveyor
overall length: 1,420 mm
total width: 1,030 mm
total width me engine: 1, 300 mm
height: 140mm

<b>information on the belt</b>
belt width: 900 mm
strap type: smooth aluminium frame <B>PROPERTIES</B> USED BELT CONVEYOR OF MANUFACTURER TRANS STANDARD INCL. MOTOR IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED CONDITION: FULLY OPERATIONAL 6 STK. IN STOCK <B>BELT CONVEYORS</B> THE BELT IS IDEAL TO DOVETAIL MACHINES OR JOBS IN THE PICKING ZONE AND TO OPTIMIZE THE INTERNAL PROCESS. TRANSPORTATION CAN FOSTER THE BELT CONVEYOR SENSITIVE AND DIFFERENT-SIZED CONTAINERS, BOXES OR OTHER PACKAGING AND ARTICLE UNITS TO THE TASK OR DELIVERY POINT AND, FOR EXAMPLE, ALSO SERVES AS A CONNECTING ROUTE BEFORE OR BETWEEN PRODUCTION AND WOODWORKING MACHINES. ALSO ENABLES EFFICIENT PARTS IN OPERATING AND STORAGE AND IS DESIGNED TO PROMOTE SIGNIFICANT FLOW RATES AND DISTANCES. <B>TECHNICAL DATA:</B> MASS OF THE BELT CONVEYOR OVERALL LENGTH: 1,420 MM TOTAL WIDTH: 1,030 MM TOTAL WIDTH ME ENGINE: 1, 300 MM HEIGHT: 140MM <B>INFORMATION ON THE BELT</B> BELT WIDTH: 900 MM STRAP TYPE: SMOOTH ALUMINIUM FRAME
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Precio: 13.900 €
Ubicación: Land-technical data feeding conveyor, underfloor, position 12 <br/>manufacturer bollegraaf <br/>typ hbt 1200/1600<br/>year of construction 1998<br/>driving motor 5,5 kw<br/>length feeding conveyor 9,440 mm<br/>effecting width 1,550 mm<br/>height of side wall feeding conv. 550 mm<br/>transport dimensions over all approx. 9,600 x 2,300 x 1,500 mm (l x b x h)<br/>weight approx. 5,000 kg<br/> <br/>technical data elevating conveyor with goose neck, position 15 <br/>manufacturer bollegraaf <br/>typ hbt 1200/1600<br/>year of construction 1998<br/>driving motor  5,5 kw<br/>length feeding conveyor 4,728 mm<br/>length elevating conveyor 16,377 mm<br/>length goose neck 1,389 mm<br/>grade 30°<br/>effecting width 1,550 mm<br/>height of side wall feeding conv. 550 mm<br/>height of side wall elevating conv. 850 mm<br/>transport dimensions over all approx. 22,300 x 2,830 x 3,250 mm (l x b x h) <br/>weight approx. 10,500 kg<br/>comments:<br/>the conveyor belt is in an operational condition and immediately available. inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA FEEDING CONVEYOR, UNDERFLOOR, POSITION 12
MANUFACTURER BOLLEGRAAF
TYP HBT 1200/1600
YEAR OF CONSTRUCTION 1998
DRIVING MOTOR 5,5 KW
LENGTH FEEDING CONVEYOR 9,440 MM
EFFECTING WIDTH 1,550 MM
HEIGHT OF SIDE WALL FEEDING CONV. 550 MM
TRANSPORT DIMENSIONS OVER ALL APPROX. 9,600 X 2,300 X 1,500 MM (L X B X H)
WEIGHT APPROX. 5,000 KG

TECHNICAL DATA ELEVATING CONVEYOR WITH GOOSE NECK, POSITION 15
MANUFACTURER BOLLEGRAAF
TYP HBT 1200/1600
YEAR OF CONSTRUCTION 1998
DRIVING MOTOR 5,5 KW
LENGTH FEEDING CONVEYOR 4,728 MM
LENGTH ELEVATING CONVEYOR 16,377 MM
LENGTH GOOSE NECK 1,389 MM
GRADE 30°
EFFECTING WIDTH 1,550 MM
HEIGHT OF SIDE WALL FEEDING CONV. 550 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 850 MM
TRANSPORT DIMENSIONS OVER ALL APPROX. 22,300 X 2,830 X 3,250 MM (L X B X H)
WEIGHT APPROX. 10,500 KG
COMMENTS:
THE CONVEYOR BELT IS IN AN OPERATIONAL CONDITION AND IMMEDIATELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-dewatering station with membrane filter press for kieselguhr sludge
 
this complete dewatering station was designed by limburg for kieselguhr waste dewatering in to semidry cakes for easy waste disposal. the process is suitable also for dewatering other type of sludges. actual dewatering is made with latham side bar membrane filter press which reaches over 50 % dry (by weight) content of waste cake, inlet sludge being between 10 and 20 % dry content filter press is equipped with an automatic cloth washing system and an automatic cake discharge. shaker bars for discharge and plate opening and closing functions are hydraulically operated (limburg cake release control system). cloth washing is made in cycles and during the wash cycle, wash arm will individually wash one chamber at a time. process includes a sludge tank with agitation, sludge and water pumps, filtrate water tank with pump, filter press with auxiliaries, supporting structures and control cabinet with siemens simatic s 7-400 plc and siemens op 7 display. equipment was delivered in year 2000 and it is still installed and in good operational condition.
 
technical data:
made by: limburg – latham
made in year: 2000
inlet sludge dry content: 10 – 20%
capacity: max 3600 kg dry product / 24 hours
cake dry content: > 50% by weight
filtrate dry solid content: < 2 % by weight
latham filter press: side bar membrane 630
total filter area: 6.9 m2
total chamber volume: 99.8 dm3
plate size: 630 mm
working pressure: 7 barg
number of chambers: 12 (expandable to 15)
plate transport: automatic, multiple cake discharge
membrane filtration pump: 159 litres / min
sludge tank: 6 m3, aisi 316l
sludge tank agitator: 0.75 kw, 80 rpm, blade 660 mm
sludge pump capacity: 511 litres / min
filtrate tank: 1.5 m3, aisi 316l   DEWATERING STATION WITH MEMBRANE FILTER PRESS FOR KIESELGUHR SLUDGE THIS COMPLETE DEWATERING STATION WAS DESIGNED BY LIMBURG FOR KIESELGUHR WASTE DEWATERING IN TO SEMIDRY CAKES FOR EASY WASTE DISPOSAL. THE PROCESS IS SUITABLE ALSO FOR DEWATERING OTHER TYPE OF SLUDGES. ACTUAL DEWATERING IS MADE WITH LATHAM SIDE BAR MEMBRANE FILTER PRESS WHICH REACHES OVER 50 % DRY (BY WEIGHT) CONTENT OF WASTE CAKE, INLET SLUDGE BEING BETWEEN 10 AND 20 % DRY CONTENT FILTER PRESS IS EQUIPPED WITH AN AUTOMATIC CLOTH WASHING SYSTEM AND AN AUTOMATIC CAKE DISCHARGE. SHAKER BARS FOR DISCHARGE AND PLATE OPENING AND CLOSING FUNCTIONS ARE HYDRAULICALLY OPERATED (LIMBURG CAKE RELEASE CONTROL SYSTEM). CLOTH WASHING IS MADE IN CYCLES AND DURING THE WASH CYCLE, WASH ARM WILL INDIVIDUALLY WASH ONE CHAMBER AT A TIME. PROCESS INCLUDES A SLUDGE TANK WITH AGITATION, SLUDGE AND WATER PUMPS, FILTRATE WATER TANK WITH PUMP, FILTER PRESS WITH AUXILIARIES, SUPPORTING STRUCTURES AND CONTROL CABINET WITH SIEMENS SIMATIC S 7-400 PLC AND SIEMENS OP 7 DISPLAY. EQUIPMENT WAS DELIVERED IN YEAR 2000 AND IT IS STILL INSTALLED AND IN GOOD OPERATIONAL CONDITION. TECHNICAL DATA: MADE BY: LIMBURG – LATHAM MADE IN YEAR: 2000 INLET SLUDGE DRY CONTENT: 10 – 20% CAPACITY: MAX 3600 KG DRY PRODUCT / 24 HOURS CAKE DRY CONTENT: > 50% BY WEIGHT FILTRATE DRY SOLID CONTENT: < 2 % BY WEIGHT LATHAM FILTER PRESS: SIDE BAR MEMBRANE 630 TOTAL FILTER AREA: 6.9 M2 TOTAL CHAMBER VOLUME: 99.8 DM3 PLATE SIZE: 630 MM WORKING PRESSURE: 7 BARG NUMBER OF CHAMBERS: 12 (EXPANDABLE TO 15) PLATE TRANSPORT: AUTOMATIC, MULTIPLE CAKE DISCHARGE MEMBRANE FILTRATION PUMP: 159 LITRES / MIN SLUDGE TANK: 6 M3, AISI 316L SLUDGE TANK AGITATOR: 0.75 KW, 80 RPM, BLADE 660 MM SLUDGE PUMP CAPACITY: 511 LITRES / MIN FILTRATE TANK: 1.5 M3, AISI 316L
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-:th-200 | th-250| th-300 <br/>grinding diameter:2000 | 2500 | 3000 mm<br/>grinding length:3000/4000/5000/6000/8000/10000/12000/14000/16000 mm<br/>swing diameter:2000 | 2500 | 3000 mm<br/>workpiece weight max.:25 t zwischen spitzen <br/>max. workpiece weight:120 t mit lünetten <br/>grinding diameter min/max:250-2000 | 300-2500 | 350-3000 mm<br/>dimensions of grinding wheel:915x100x304.8 (option1060x150x508) mm<br/>traverse- head stock:quer: 910 mm<br/>feeding of spindle:0.001 mm<br/>cross feed autom.:3000 mm/min<br/>grinding spindle speed:500~1500 u/min<br/>traverse- head stock:längs: spitzenweite + 200mm mm<br/>grinding spindle slide rapid travel:25~6000 mm/min<br/>tailstock quill stroke:170 mm<br/>tailstock movement:1800 mm/min<br/>rotation speed of workhead :5~50 1/min<br/>drive capacity - spindle motor:siemens:40-60 ps x 4 stück <br/>power capacity - workpiece power:siemens:75-100 ps x 6 stück <br/>cnc controller:siemens/fanuc <br/>grinding wheel cover: <br/>extractor for grinding wheel flange: <br/>balancing mandrel: <br/>center morse: <br/>open tailstocks: <br/>coolant system: <br/>wheel dresser fitted on the tale stock: <br/>: <br/>work piece driver: <br/>machine tools: <br/>: <br/>ce-certificate: <br/>automatic wheel balancing system : <br/>3-jaw chuck: <br/>4-jaw chuck: <br/>touch probe: <br/>automatic workpiece measurement: <br/>hydr. tailstock quill: <br/>linear scales: <br/><br/>brand new cnc roll grinders (with movable grinding spindle), type th, with user-friendly siemens control. all essential components of well-known manufacturers.  grinding diameter of 1.000mm - 3.000mm and peak widths available to 16.000mm. precisions of 0,002mm ~ 0,005mm. heavy tailstock with motor and compressed air for simple process werkstückanrieb with infinitely variable speed, which can be set via the controller hydronynamische and -static lubrication of the guideway (with turcite b-coated) for optimal grinding results. the spindle is hydodynamisch / - mounted statically. special grinding cycles for convex and concave grinding.    for more information about the machine, standard accessories and options please refer to the plant.  you also benefit from the favorable conditions of leasing and hire abc leasing: ask us about it! of course we can also arrange free delivery incl. assembly / commissioning and operational hand-over, and training. :TH-200 | TH-250| TH-300
GRINDING DIAMETER:2000 | 2500 | 3000 MM
GRINDING LENGTH:3000/4000/5000/6000/8000/10000/12000/14000/16000 MM
SWING DIAMETER:2000 | 2500 | 3000 MM
WORKPIECE WEIGHT MAX.:25 T ZWISCHEN SPITZEN
MAX. WORKPIECE WEIGHT:120 T MIT LüNETTEN
GRINDING DIAMETER MIN/MAX:250-2000 | 300-2500 | 350-3000 MM
DIMENSIONS OF GRINDING WHEEL:915X100X304.8 (OPTION1060X150X508) MM
TRAVERSE- HEAD STOCK:QUER: 910 MM
FEEDING OF SPINDLE:0.001 MM
CROSS FEED AUTOM.:3000 MM/MIN
GRINDING SPINDLE SPEED:500~1500 U/MIN
TRAVERSE- HEAD STOCK:LäNGS: SPITZENWEITE + 200MM MM
GRINDING SPINDLE SLIDE RAPID TRAVEL:25~6000 MM/MIN
TAILSTOCK QUILL STROKE:170 MM
TAILSTOCK MOVEMENT:1800 MM/MIN
ROTATION SPEED OF WORKHEAD :5~50 1/MIN
DRIVE CAPACITY - SPINDLE MOTOR:SIEMENS:40-60 PS X 4 STüCK
POWER CAPACITY - WORKPIECE POWER:SIEMENS:75-100 PS X 6 STüCK
CNC CONTROLLER:SIEMENS/FANUC
GRINDING WHEEL COVER:
EXTRACTOR FOR GRINDING WHEEL FLANGE:
BALANCING MANDREL:
CENTER MORSE:
OPEN TAILSTOCKS:
COOLANT SYSTEM:
WHEEL DRESSER FITTED ON THE TALE STOCK:
:
WORK PIECE DRIVER:
MACHINE TOOLS:
:
CE-CERTIFICATE:
AUTOMATIC WHEEL BALANCING SYSTEM :
3-JAW CHUCK:
4-JAW CHUCK:
TOUCH PROBE:
AUTOMATIC WORKPIECE MEASUREMENT:
HYDR. TAILSTOCK QUILL:
LINEAR SCALES:

BRAND NEW CNC ROLL GRINDERS (WITH MOVABLE GRINDING SPINDLE), TYPE TH, WITH USER-FRIENDLY SIEMENS CONTROL. ALL ESSENTIAL COMPONENTS OF WELL-KNOWN MANUFACTURERS. GRINDING DIAMETER OF 1.000MM - 3.000MM AND PEAK WIDTHS AVAILABLE TO 16.000MM. PRECISIONS OF 0,002MM ~ 0,005MM. HEAVY TAILSTOCK WITH MOTOR AND COMPRESSED AIR FOR SIMPLE PROCESS WERKSTüCKANRIEB WITH INFINITELY VARIABLE SPEED, WHICH CAN BE SET VIA THE CONTROLLER HYDRONYNAMISCHE AND -STATIC LUBRICATION OF THE GUIDEWAY (WITH TURCITE B-COATED) FOR OPTIMAL GRINDING RESULTS. THE SPINDLE IS HYDODYNAMISCH / - MOUNTED STATICALLY. SPECIAL GRINDING CYCLES FOR CONVEX AND CONCAVE GRINDING. FOR MORE INFORMATION ABOUT THE MACHINE, STANDARD ACCESSORIES AND OPTIONS PLEASE REFER TO THE PLANT. YOU ALSO BENEFIT FROM THE FAVORABLE CONDITIONS OF LEASING AND HIRE ABC LEASING: ASK US ABOUT IT! OF COURSE WE CAN ALSO ARRANGE FREE DELIVERY INCL. ASSEMBLY / COMMISSIONING AND OPERATIONAL HAND-OVER, AND TRAINING.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-empty bottle inspector heuft inline ebi with reflexx and spectrum tx units
 
the machine was installed in year 2007 and its currently in very good operational condition. the capacity is 72 000 bph. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. it has heuft pilot cd manuals in english
 
this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.
 
sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.
 
the ebi has optical heuft thread detection system which inspects the screw closure finish on a glass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.
 
this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.
 
technical data:
manufacturer: heuft gmbh, germany
year: 2007
type: heuft spectrum tx inline ebi with reflexx image processing and heuft syncron system
capacity: 72 000 bph
reliability: 99.9 % detection complete heuft manuals in english.   EMPTY BOTTLE INSPECTOR HEUFT INLINE EBI WITH REFLEXX AND SPECTRUM TX UNITS THE MACHINE WAS INSTALLED IN YEAR 2007 AND ITS CURRENTLY IN VERY GOOD OPERATIONAL CONDITION. THE CAPACITY IS 72 000 BPH. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. IT HAS HEUFT PILOT CD MANUALS IN ENGLISH THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON A GLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 2007 TYPE: HEUFT SPECTRUM TX INLINE EBI WITH REFLEXX IMAGE PROCESSING AND HEUFT SYNCRON SYSTEM CAPACITY: 72 000 BPH RELIABILITY: 99.9 % DETECTION COMPLETE HEUFT MANUALS IN ENGLISH.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-:th-1000 | th-1250 | th-1600 <br/>grinding diameter:1000 | 1250 | 1600 mm<br/>grinding length:3000/4000/5000/6000/8000/10000/12000/14000/16000 mm<br/>swing diameter:1000 | 1250 | 1600 mm<br/>workpiece weight max.:20 t zwischen spitzen <br/>max. workpiece weight:25 t mit lünetten | 25-60 t mit lünetten | 25-60 t mit lünetten <br/>grinding diameter min/max:75-1000 | 150-1250 | 250-1600 mm<br/>dimensions of grinding wheel:915x100x304.8 (option1060x150x508) mm<br/>traverse- head stock:quer: 550 | quer: 780 | quer: 910 mm<br/>feeding of spindle:0.001 mm<br/>cross feed autom.:3000 mm/min<br/>grinding spindle speed:500~1500 u/min<br/>traverse- head stock:längs: spitzenweite + 200mm mm<br/>grinding spindle slide rapid travel:25~6000 mm/min<br/>tailstock quill stroke:170 mm<br/>tailstock movement:1800 mm/min<br/>rotation speed of workhead :5~50 1/min<br/>drive capacity - spindle motor:siemens:40-60 ps x 4 stück <br/>power capacity - workpiece power:siemens:75-100 ps x 6 stück <br/>cnc controller:siemens/fanuc <br/>grinding wheel cover: <br/>extractor for grinding wheel flange: <br/>balancing mandrel: <br/>center morse: <br/>open tailstocks: <br/>coolant system: <br/>wheel dresser fitted on the tale stock: <br/>: <br/>work piece driver: <br/>machine tools: <br/>: <br/>ce-certificate: <br/>automatic wheel balancing system : <br/>3-jaw chuck: <br/>4-jaw chuck: <br/>touch probe: <br/>automatic workpiece measurement: <br/>hydr. tailstock quill: <br/>linear scales: <br/><br/>brand new cnc roll grinders (with movable grinding spindle), type th, with user-friendly siemens control. all essential components of well-known manufacturers.  grinding diameter of 1.000mm - 3.000mm and peak widths available to 16.000mm. precisions of 0,002mm ~ 0,005mm. heavy tailstock with motor and compressed air for simple process werkstückanrieb with infinitely variable speed, which can be set via the controller hydronynamische and -static lubrication of the guideway (with turcite b-coated) for optimal grinding results. the spindle is hydodynamisch / - mounted statically. special grinding cycles for convex and concave grinding.    for more information about the machine, standard accessories and options please refer to the plant.  you also benefit from the favorable conditions of leasing and hire abc leasing: ask us about it! of course we can also arrange free delivery incl. assembly / commissioning and operational hand-over, and training. :TH-1000 | TH-1250 | TH-1600
GRINDING DIAMETER:1000 | 1250 | 1600 MM
GRINDING LENGTH:3000/4000/5000/6000/8000/10000/12000/14000/16000 MM
SWING DIAMETER:1000 | 1250 | 1600 MM
WORKPIECE WEIGHT MAX.:20 T ZWISCHEN SPITZEN
MAX. WORKPIECE WEIGHT:25 T MIT LüNETTEN | 25-60 T MIT LüNETTEN | 25-60 T MIT LüNETTEN
GRINDING DIAMETER MIN/MAX:75-1000 | 150-1250 | 250-1600 MM
DIMENSIONS OF GRINDING WHEEL:915X100X304.8 (OPTION1060X150X508) MM
TRAVERSE- HEAD STOCK:QUER: 550 | QUER: 780 | QUER: 910 MM
FEEDING OF SPINDLE:0.001 MM
CROSS FEED AUTOM.:3000 MM/MIN
GRINDING SPINDLE SPEED:500~1500 U/MIN
TRAVERSE- HEAD STOCK:LäNGS: SPITZENWEITE + 200MM MM
GRINDING SPINDLE SLIDE RAPID TRAVEL:25~6000 MM/MIN
TAILSTOCK QUILL STROKE:170 MM
TAILSTOCK MOVEMENT:1800 MM/MIN
ROTATION SPEED OF WORKHEAD :5~50 1/MIN
DRIVE CAPACITY - SPINDLE MOTOR:SIEMENS:40-60 PS X 4 STüCK
POWER CAPACITY - WORKPIECE POWER:SIEMENS:75-100 PS X 6 STüCK
CNC CONTROLLER:SIEMENS/FANUC
GRINDING WHEEL COVER:
EXTRACTOR FOR GRINDING WHEEL FLANGE:
BALANCING MANDREL:
CENTER MORSE:
OPEN TAILSTOCKS:
COOLANT SYSTEM:
WHEEL DRESSER FITTED ON THE TALE STOCK:
:
WORK PIECE DRIVER:
MACHINE TOOLS:
:
CE-CERTIFICATE:
AUTOMATIC WHEEL BALANCING SYSTEM :
3-JAW CHUCK:
4-JAW CHUCK:
TOUCH PROBE:
AUTOMATIC WORKPIECE MEASUREMENT:
HYDR. TAILSTOCK QUILL:
LINEAR SCALES:

BRAND NEW CNC ROLL GRINDERS (WITH MOVABLE GRINDING SPINDLE), TYPE TH, WITH USER-FRIENDLY SIEMENS CONTROL. ALL ESSENTIAL COMPONENTS OF WELL-KNOWN MANUFACTURERS. GRINDING DIAMETER OF 1.000MM - 3.000MM AND PEAK WIDTHS AVAILABLE TO 16.000MM. PRECISIONS OF 0,002MM ~ 0,005MM. HEAVY TAILSTOCK WITH MOTOR AND COMPRESSED AIR FOR SIMPLE PROCESS WERKSTüCKANRIEB WITH INFINITELY VARIABLE SPEED, WHICH CAN BE SET VIA THE CONTROLLER HYDRONYNAMISCHE AND -STATIC LUBRICATION OF THE GUIDEWAY (WITH TURCITE B-COATED) FOR OPTIMAL GRINDING RESULTS. THE SPINDLE IS HYDODYNAMISCH / - MOUNTED STATICALLY. SPECIAL GRINDING CYCLES FOR CONVEX AND CONCAVE GRINDING. FOR MORE INFORMATION ABOUT THE MACHINE, STANDARD ACCESSORIES AND OPTIONS PLEASE REFER TO THE PLANT. YOU ALSO BENEFIT FROM THE FAVORABLE CONDITIONS OF LEASING AND HIRE ABC LEASING: ASK US ABOUT IT! OF COURSE WE CAN ALSO ARRANGE FREE DELIVERY INCL. ASSEMBLY / COMMISSIONING AND OPERATIONAL HAND-OVER, AND TRAINING.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-bottle formats: 0.125/ 0.2/ 0.5/ 0.75l, bottle shape: various, operational hours: ca. 35,000h.  BOTTLE FORMATS: 0.125/ 0.2/ 0.5/ 0.75L, BOTTLE SHAPE: VARIOUS, OPERATIONAL HOURS: CA. 35,000H.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-x-travel:8200 mm<br/>y-travel:1700 mm<br/>z-travel:1000 mm<br/>spindle drive:36 kw<br/>table-size:10.000 x 1060  mm<br/>spindle speed:  u/min<br/>dimensions of the machine ca.: m<br/>automatic tool changer:40-fach <br/>5 position auto index head:2 stück/pc <br/><br/>used cnc traveling column milling machine mecof with cs 1040 cnc with automatic. head and extensive accessories:  2 piece automatic. heads 2 piece angle plates tool changer 40 times cnc control heidenhain tnc 355 q   further technical data and accessories, as defined in appendix.  warranty: none  take advantage of the favorable leasing and rental conditions of abc leasing. ask us about it.upon request we can organize delivery, installation / commissioning and operational hand-over and control training. X-TRAVEL:8200 MM
Y-TRAVEL:1700 MM
Z-TRAVEL:1000 MM
SPINDLE DRIVE:36 KW
TABLE-SIZE:10.000 X 1060 MM
SPINDLE SPEED: U/MIN
DIMENSIONS OF THE MACHINE CA.: M
AUTOMATIC TOOL CHANGER:40-FACH
5 POSITION AUTO INDEX HEAD:2 STüCK/PC

USED CNC TRAVELING COLUMN MILLING MACHINE MECOF WITH CS 1040 CNC WITH AUTOMATIC. HEAD AND EXTENSIVE ACCESSORIES: 2 PIECE AUTOMATIC. HEADS 2 PIECE ANGLE PLATES TOOL CHANGER 40 TIMES CNC CONTROL HEIDENHAIN TNC 355 Q FURTHER TECHNICAL DATA AND ACCESSORIES, AS DEFINED IN APPENDIX. WARRANTY: NONE TAKE ADVANTAGE OF THE FAVORABLE LEASING AND RENTAL CONDITIONS OF ABC LEASING. ASK US ABOUT IT.UPON REQUEST WE CAN ORGANIZE DELIVERY, INSTALLATION / COMMISSIONING AND OPERATIONAL HAND-OVER AND CONTROL TRAINING.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 85 €
Ubicación: Land-over 100 pieces of corletten, b 230cm t 115cm h 180cm - used -:
 
price from site: â?¬85.-/ piece (net) in complete loss!
 
price for larger part: 95.-â?¬ (net), from the site!
 
manufacturer: used cooking
type: multi box 230
year: 06/95
load capacity: 600 kg
weight: approx. 87 kg
dimensions:
height: 180 cm
width: 230 cm
depth: 115 cm
klapp and folding
stackable: no
without runners
color: blue
shelves: as requirements for upholstered furniture are also available single push rods
condition: used and operational
location: 40721 hilden OVER 100 PIECES OF CORLETTEN, B 230CM T 115CM H 180CM - USED -: PRICE FROM SITE: &ACIRC;?&NOT;85.-/ PIECE (NET) IN COMPLETE LOSS! PRICE FOR LARGER PART: 95.-&ACIRC;?&NOT; (NET), FROM THE SITE! MANUFACTURER: USED COOKING TYPE: MULTI BOX 230 YEAR: 06/95 LOAD CAPACITY: 600 KG WEIGHT: APPROX. 87 KG DIMENSIONS: HEIGHT: 180 CM WIDTH: 230 CM DEPTH: 115 CM KLAPP AND FOLDING STACKABLE: NO WITHOUT RUNNERS COLOR: BLUE SHELVES: AS REQUIREMENTS FOR UPHOLSTERED FURNITURE ARE ALSO AVAILABLE SINGLE PUSH RODS CONDITION: USED AND OPERATIONAL LOCATION: 40721 HILDEN
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-x-travel:2000 mm<br/>y-travel:1000 mm<br/>z-travel:1000 mm<br/>table-size:2300x900 mm<br/>workpiece weight:3500 kg<br/>drive capacity - spindle motor:22 kw<br/>spindle cone:50 iso<br/>spindle turning speed range:3000 rpm<br/>dimensions of the machine ca.:6367 x 5070 x 2803 mm<br/>weight of the machine ca.:14 t<br/>mpg hand wheel: <br/>machine semi-cover: <br/>cnc controller: heidenhain tnc 530 <br/>universal milling head:manuell <br/><br/>overhauled universal milling machine correa prisma 20 with heidenhain control 530  other technical specifications and accessories, as defined in appendix.  warranty: 6 months on parts  take advantage of the favorable leasing and rental conditions of abc leasing. ask us about it. of course, you will get the free delivery, installation / commissioning and operational hand-over and control training. X-TRAVEL:2000 MM
Y-TRAVEL:1000 MM
Z-TRAVEL:1000 MM
TABLE-SIZE:2300X900 MM
WORKPIECE WEIGHT:3500 KG
DRIVE CAPACITY - SPINDLE MOTOR:22 KW
SPINDLE CONE:50 ISO
SPINDLE TURNING SPEED RANGE:3000 RPM
DIMENSIONS OF THE MACHINE CA.:6367 X 5070 X 2803 MM
WEIGHT OF THE MACHINE CA.:14 T
MPG HAND WHEEL:
MACHINE SEMI-COVER:
CNC CONTROLLER: HEIDENHAIN TNC 530
UNIVERSAL MILLING HEAD:MANUELL

OVERHAULED UNIVERSAL MILLING MACHINE CORREA PRISMA 20 WITH HEIDENHAIN CONTROL 530 OTHER TECHNICAL SPECIFICATIONS AND ACCESSORIES, AS DEFINED IN APPENDIX. WARRANTY: 6 MONTHS ON PARTS TAKE ADVANTAGE OF THE FAVORABLE LEASING AND RENTAL CONDITIONS OF ABC LEASING. ASK US ABOUT IT. OF COURSE, YOU WILL GET THE FREE DELIVERY, INSTALLATION / COMMISSIONING AND OPERATIONAL HAND-OVER AND CONTROL TRAINING.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-max. pressure: 	50 tons 	
year of production: 2001
unit pressure: 	5.2 kg/cm² 	
productivity: 	2 bale/h.
bale dimensions: 1200x800x1200 mm 	
price: 	to inquiry
 bale weight: 	ca. 500 kg 	  	 
supply: 	400 v/ 7,5 kw 	  	 

 
the machine is fully operational after service and after premium paint renovation.

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939 MAX. PRESSURE: 50 TONS YEAR OF PRODUCTION: 2001 UNIT PRESSURE: 5.2 KG/CM² PRODUCTIVITY: 2 BALE/H. BALE DIMENSIONS: 1200X800X1200 MM PRICE: TO INQUIRY BALE WEIGHT: CA. 500 KG SUPPLY: 400 V/ 7,5 KW THE MACHINE IS FULLY OPERATIONAL AFTER SERVICE AND AFTER PREMIUM PAINT RENOVATION. ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-x-travel:6000 mm<br/>y-travel:1000 mm<br/>z-travel:1000 mm<br/>spindle drive:15 kw<br/>table-size:8000 x 1200 mm<br/>rapid speed:10 m/min<br/>spindle speed:10-2000  u/min<br/>dimensions of the machine ca.: m<br/>weight of the machine ca.:35 t<br/><br/>used cnc traveling column milling machine with cnc control of num 1060    further technical data and accessories, as defined in appendix.  warranty: no  take advantage of the favorable leasing and rental conditions of abc leasing. ask us about it. upon request we can organize delivery, installation / commissioning and operational hand-over and control training. X-TRAVEL:6000 MM
Y-TRAVEL:1000 MM
Z-TRAVEL:1000 MM
SPINDLE DRIVE:15 KW
TABLE-SIZE:8000 X 1200 MM
RAPID SPEED:10 M/MIN
SPINDLE SPEED:10-2000 U/MIN
DIMENSIONS OF THE MACHINE CA.: M
WEIGHT OF THE MACHINE CA.:35 T

USED CNC TRAVELING COLUMN MILLING MACHINE WITH CNC CONTROL OF NUM 1060 FURTHER TECHNICAL DATA AND ACCESSORIES, AS DEFINED IN APPENDIX. WARRANTY: NO TAKE ADVANTAGE OF THE FAVORABLE LEASING AND RENTAL CONDITIONS OF ABC LEASING. ASK US ABOUT IT. UPON REQUEST WE CAN ORGANIZE DELIVERY, INSTALLATION / COMMISSIONING AND OPERATIONAL HAND-OVER AND CONTROL TRAINING.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine demag dnc ii 175

this demag injection molding machine was a testing machine in a petrochemical factory and afterwards it served several years as a training machine in a local technical university. the machine is used in laboratory test production and training purposes only, not in actual production ever. we dismantled it in 2008 and took it to our warehouse where it is today. it looks to be in good condition.

technical description:
manufacturer: mannesmann demag kunstofftechnik, germany
type: m-type demag dnc ii 175
year: 1981 – very little used
screw diameter: 52 mm, 16d
clamping force: 1750kn
injection volume: 380 cm3
control: microprocessor control system
measurements: 6.6 x 1.5 x 2.2 m (lxwxh)
weight: 7.800 kg
condition: very good – operational
typical products: pipe fittings, house hold articles, technical products   INJECTION MOLDING MACHINE DEMAG DNC II 175 THIS DEMAG INJECTION MOLDING MACHINE WAS A TESTING MACHINE IN A PETROCHEMICAL FACTORY AND AFTERWARDS IT SERVED SEVERAL YEARS AS A TRAINING MACHINE IN A LOCAL TECHNICAL UNIVERSITY. THE MACHINE IS USED IN LABORATORY TEST PRODUCTION AND TRAINING PURPOSES ONLY, NOT IN ACTUAL PRODUCTION EVER. WE DISMANTLED IT IN 2008 AND TOOK IT TO OUR WAREHOUSE WHERE IT IS TODAY. IT LOOKS TO BE IN GOOD CONDITION. TECHNICAL DESCRIPTION: MANUFACTURER: MANNESMANN DEMAG KUNSTOFFTECHNIK, GERMANY TYPE: M-TYPE DEMAG DNC II 175 YEAR: 1981 – VERY LITTLE USED SCREW DIAMETER: 52 MM, 16D CLAMPING FORCE: 1750KN INJECTION VOLUME: 380 CM3 CONTROL: MICROPROCESSOR CONTROL SYSTEM MEASUREMENTS: 6.6 X 1.5 X 2.2 M (LXWXH) WEIGHT: 7.800 KG CONDITION: VERY GOOD – OPERATIONAL TYPICAL PRODUCTS: PIPE FITTINGS, HOUSE HOLD ARTICLES, TECHNICAL PRODUCTS
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 16.500 €
Ubicación: Land-serial number: 0-261-06-2549 <br/>weight approx.: 2800 kg<br/>control: pc 16 <br/>dimensions (l x w x h) approx.: 5000 x 1200 x 2400 mm<br/>feed: 11 m/min<br/>edge thickness: 0,4 - 3  (6 mm) mm<br/>workpiece thickness: 8 - 40 mm<br/>joint trimming unit: 2 x 2,2 kw <br/>gluing unit: schugoma hot air system / brandt pu <br/>snipping unit: 2 x 0,18 kw <br/>fine trimming unit: 2 x 0,27 kw <br/>profile trimming unit: 1 x 0,35 kw <br/>flat scraping unit: ja / yes  (5780) <br/>profile scraping unit: ja / yes  (5736) <br/>total power approx: 19 kw<br/>edge magazine with: 1 -fold roller<br/>description: <b>brandt optimat kdf 530 c edgebander with schugoma hot-air-system kantenking</b><br> <br> <b>brandt:</b><br> <br> ? edge thickness: 0,4 - 3 mm (6 mm)<br> ? workpiece thickness: 8 - 40 mm<br> ? feed: 11 m/min<br> ? joint trimming unit: 2 x 2,2 kw<br> ? gluing unit: schugoma hot air system / brandt pu<br> ? edge magazine: 1 fold role<br> ? snipping unit: 2 x 0,18 kw<br> ? fine/profil trimming unit: 2 x 0,27 kw<br> ? profile trimming unit: 1 x 0,35 kw<br> ? flat scraping unit: ja (5780)<br> ? profile scraping unit: ja (5736)<br> ? control: pc 16<br> <br> <b>schugoma kantenking:</b><br> <br> ? com 2015<br> ? hot-air-system<br> ? zero joint<br> ? edge thickness: depending on the machineb<br> ? edge hight: up to 65 mm<br> ? feed: up to max. 20 m/min<br> ? electronic power: 9 kw<br> ? wight: 30 kg-50kg<br> ? heating time: approx. 20 min.<br> <br> <b>the schugoma hot-air-system has always been brought up to date, as the machine is a demonstrator in operational use.</b> SERIAL NUMBER: 0-261-06-2549
WEIGHT APPROX.: 2800 KG
CONTROL: PC 16
DIMENSIONS (L X W X H) APPROX.: 5000 X 1200 X 2400 MM
FEED: 11 M/MIN
EDGE THICKNESS: 0,4 - 3 (6 MM) MM
WORKPIECE THICKNESS: 8 - 40 MM
JOINT TRIMMING UNIT: 2 X 2,2 KW
GLUING UNIT: SCHUGOMA HOT AIR SYSTEM / BRANDT PU
SNIPPING UNIT: 2 X 0,18 KW
FINE TRIMMING UNIT: 2 X 0,27 KW
PROFILE TRIMMING UNIT: 1 X 0,35 KW
FLAT SCRAPING UNIT: JA / YES (5780)
PROFILE SCRAPING UNIT: JA / YES (5736)
TOTAL POWER APPROX: 19 KW
EDGE MAGAZINE WITH: 1 -FOLD ROLLER
DESCRIPTION: BRANDT OPTIMAT KDF 530 C EDGEBANDER WITH SCHUGOMA HOT-AIR-SYSTEM KANTENKING

BRANDT:

? EDGE THICKNESS: 0,4 - 3 MM (6 MM)
? WORKPIECE THICKNESS: 8 - 40 MM
? FEED: 11 M/MIN
? JOINT TRIMMING UNIT: 2 X 2,2 KW
? GLUING UNIT: SCHUGOMA HOT AIR SYSTEM / BRANDT PU
? EDGE MAGAZINE: 1 FOLD ROLE
? SNIPPING UNIT: 2 X 0,18 KW
? FINE/PROFIL TRIMMING UNIT: 2 X 0,27 KW
? PROFILE TRIMMING UNIT: 1 X 0,35 KW
? FLAT SCRAPING UNIT: JA (5780)
? PROFILE SCRAPING UNIT: JA (5736)
? CONTROL: PC 16

SCHUGOMA KANTENKING:

? COM 2015
? HOT-AIR-SYSTEM
? ZERO JOINT
? EDGE THICKNESS: DEPENDING ON THE MACHINEB
? EDGE HIGHT: UP TO 65 MM
? FEED: UP TO MAX. 20 M/MIN
? ELECTRONIC POWER: 9 KW
? WIGHT: 30 KG-50KG
? HEATING TIME: APPROX. 20 MIN.

THE SCHUGOMA HOT-AIR-SYSTEM HAS ALWAYS BEEN BROUGHT UP TO DATE, AS THE MACHINE IS A DEMONSTRATOR IN OPERATIONAL USE.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-wartsila 52 mw chp power plant with 6 x 20v34sg gas generators - 2005

complete running power plant with 6 units of wartsila 20v34sg spark ignited natural gas engine driven generators. plant has the heat recovery boilers which can produce 6 x 4.5 t/h low pressure steam. the main equipment was delivered and commissioned by wartsila in year 2006 and 2008 and today the units have approx 40 000 - 50 000 operating hours depending on unit. the equipment is in good operational condition but the engines need a 46 000 hour overhaul.

generators are installed on common base frame with the engines and common base frame is isolated from the foundation by flexible mounting with steel springs. most of the auxiliaries are in the factory built in large new type modules which enable easy relocation of the equipment.

the engines are of the four stroke, lean burn, pre chamber, spark ignited, port injected, trunk piston, turbocharged and intercooled design. the engine automation is a complete embedded management system, integrated with an engine control system for electricity controlled fuel injection. the control system is distributed bus based system where monitoring and control function is placed close to measuring and control point. this leads to less wiring and improved performance. the engines are designed for continuous operation in gas mode in island mode at any load between 40 -100% of nominal power

main technical data at full load and current site conditions:
installed power 52 300 kw at 31.5 kv, 50 hz
plant steam output 6 x 5 tons/h at 14 bar
fuel: natural gas
engines: 6 x w20v34sg, running at 750 rpm
alternators: 6 x abb 12 162 kva, 11 kv, 50 hz, p.f. 0.8
year of manufacturing: 2005
operating hours: approx 50000 /unit
original heat rate (at alt.) 8188 kj/kwhe (44.0 %)
plant own consumption: 1200 kw
cooling system: closed loop radiators
status: in peak loading operation
condition: in good operational   WARTSILA 52 MW CHP POWER PLANT WITH 6 X 20V34SG GAS GENERATORS - 2005 COMPLETE RUNNING POWER PLANT WITH 6 UNITS OF WARTSILA 20V34SG SPARK IGNITED NATURAL GAS ENGINE DRIVEN GENERATORS. PLANT HAS THE HEAT RECOVERY BOILERS WHICH CAN PRODUCE 6 X 4.5 T/H LOW PRESSURE STEAM. THE MAIN EQUIPMENT WAS DELIVERED AND COMMISSIONED BY WARTSILA IN YEAR 2006 AND 2008 AND TODAY THE UNITS HAVE APPROX 40 000 - 50 000 OPERATING HOURS DEPENDING ON UNIT. THE EQUIPMENT IS IN GOOD OPERATIONAL CONDITION BUT THE ENGINES NEED A 46 000 HOUR OVERHAUL. GENERATORS ARE INSTALLED ON COMMON BASE FRAME WITH THE ENGINES AND COMMON BASE FRAME IS ISOLATED FROM THE FOUNDATION BY FLEXIBLE MOUNTING WITH STEEL SPRINGS. MOST OF THE AUXILIARIES ARE IN THE FACTORY BUILT IN LARGE NEW TYPE MODULES WHICH ENABLE EASY RELOCATION OF THE EQUIPMENT. THE ENGINES ARE OF THE FOUR STROKE, LEAN BURN, PRE CHAMBER, SPARK IGNITED, PORT INJECTED, TRUNK PISTON, TURBOCHARGED AND INTERCOOLED DESIGN. THE ENGINE AUTOMATION IS A COMPLETE EMBEDDED MANAGEMENT SYSTEM, INTEGRATED WITH AN ENGINE CONTROL SYSTEM FOR ELECTRICITY CONTROLLED FUEL INJECTION. THE CONTROL SYSTEM IS DISTRIBUTED BUS BASED SYSTEM WHERE MONITORING AND CONTROL FUNCTION IS PLACED CLOSE TO MEASURING AND CONTROL POINT. THIS LEADS TO LESS WIRING AND IMPROVED PERFORMANCE. THE ENGINES ARE DESIGNED FOR CONTINUOUS OPERATION IN GAS MODE IN ISLAND MODE AT ANY LOAD BETWEEN 40 -100% OF NOMINAL POWER MAIN TECHNICAL DATA AT FULL LOAD AND CURRENT SITE CONDITIONS: INSTALLED POWER 52 300 KW AT 31.5 KV, 50 HZ PLANT STEAM OUTPUT 6 X 5 TONS/H AT 14 BAR FUEL: NATURAL GAS ENGINES: 6 X W20V34SG, RUNNING AT 750 RPM ALTERNATORS: 6 X ABB 12 162 KVA, 11 KV, 50 HZ, P.F. 0.8 YEAR OF MANUFACTURING: 2005 OPERATING HOURS: APPROX 50000 /UNIT ORIGINAL HEAT RATE (AT ALT.) 8188 KJ/KWHE (44.0 %) PLANT OWN CONSUMPTION: 1200 KW COOLING SYSTEM: CLOSED LOOP RADIATORS STATUS: IN PEAK LOADING OPERATION CONDITION: IN GOOD OPERATIONAL
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 340.580 €
Ubicación: Land-: 3.100 x 1.550 mm<br/>: 1.070 - 1.080 nm<br/>: 5,0 khz<br/>: 33 kwh<br/>: 16 mm<br/>: 8 mm<br/>: 8 mm<br/>: 3.100 mm<br/>: 1.550 mm<br/>: 125 mm<br/>: 3.000 x 1.500 mm<br/>: 1.000 kg<br/>: 9.000 x 7.500 mm<br/>: 6.300 mm<br/>: 4.860 mm<br/>: 2.300 mm<br/>: 9.000 kg<br/>fiber laser hesse hd-fs made by durma<br/><br/>when the requirement is to laser cut with high performance and precision, though the available space is limited, it is a task for the model hd-fs. the control unit is integrated in the machine to keep the overall dimensions as low as possible. the table can be manually pulled out on the side of the machine to load and unload it.<br/><br/>the laser power source (resonator) of the hdfl series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/> <br/>the machine consists of the following components:<br/><br/>capsuled cutting room with safety glass<br/>lateral shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time<br/>cnc control siemens sinumerik with grafic display (made in germany!)<br/>- technology and cutting parameter data bank with presettings for common metals<br/>laser source i.p.g 4000 (made in germany!)<br/>autofocus-cutting head precitec with integrated and adjusted sensor technics and mororized focus position adjustment (made in germany!) <br/>liquid cooler for cutting head and resonator<br/>cad/cam software lantek to program and optimize utilization of material (nesting)<br/>remote maintenance by lan connection<br/>safety light barrier covering<br/>laser service set<br/><br/>options:<br/><br/>exhaust unit with filters   ? 12.460,-<br/><br/>scrap conveyor for small parts and waste   ? 5.750,-<br/><br/><br/>(video shows mod. hd-fl with linear motors, model generation 2014)<br/><br/><br/><br/>fiber laser hesse hd-fs made by durma<br/><br/>when the requirement is to laser cut with high performance and precision, though the available space is limited, it is a task for the model hd-fs. the control unit is integrated in the machine to keep the overall dimensions as low as possible. the table can be manually pulled out on the side of the machine to load and unload it.<br/><br/>the laser power source (resonator) of the hdfl series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/> <br/>the machine consists of the following components:<br/><br/>capsuled cutting room with safety glass<br/>lateral shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time<br/>cnc control siemens sinumerik with grafic display (made in germany!)<br/>- technology and cutting parameter data bank with presettings for common metals<br/>laser source i.p.g 2000 (made in germany!)<br/>autofocus-cutting head precitec with integrated and adjusted sensor technics and mororized focus position adjustment (made in germany!) <br/>liquid cooler for cutting head and resonator<br/>cad/cam software lantek to program and optimize utilization of material (nesting)<br/>remote maintenance by lan connection<br/>laser service set<br/><br/><br/><br/>cutting area: 3.100 x 1.550 mm <br/>laser power: 0,4 - 4,0 kw <br/>wavelength: 1.070 - 1.080 nm <br/>polarization: random <br/>max. pulse frequency: 5,0 khz <br/>average power consumption: 33 kwh <br/>application range:  <br/>mild steel: 16 mm <br/>stainless steel: 8 mm <br/>aluminium: 8 mm <br/>working ange:  <br/>x-axis: 3.100 mm <br/>y-axis: 1.550 mm <br/>z-axis: 125 mm<br/>max. sheet size: 3.000 x 1.500 mm<br/>max. sheet weight: 1.000 kg<br/>dynamic and precision:  <br/>max speed x-axes: 90 m/min<br/>max speed y-axes: 90 m/min<br/>max. spped simultaneous: 127 m/min<br/>max. acceleration: 10 m/s² <br/>positional accuracy: +/- 0,05 mm <br/>repeatability: +/- 0,05 mm <br/>dimensions:  <br/>lay-out area ca.: 9.000 x 7.500 mm<br/>length: 6.300 mm<br/>width: 4.860 mm<br/>height: 2.300 mm<br/>weight ca.: 9.000 kg<br/><br/><br/><br/> : 3.100 X 1.550 MM
: 1.070 - 1.080 NM
: 5,0 KHZ
: 33 KWH
: 16 MM
: 8 MM
: 8 MM
: 3.100 MM
: 1.550 MM
: 125 MM
: 3.000 X 1.500 MM
: 1.000 KG
: 9.000 X 7.500 MM
: 6.300 MM
: 4.860 MM
: 2.300 MM
: 9.000 KG
FIBER LASER HESSE HD-FS MADE BY DURMA

WHEN THE REQUIREMENT IS TO LASER CUT WITH HIGH PERFORMANCE AND PRECISION, THOUGH THE AVAILABLE SPACE IS LIMITED, IT IS A TASK FOR THE MODEL HD-FS. THE CONTROL UNIT IS INTEGRATED IN THE MACHINE TO KEEP THE OVERALL DIMENSIONS AS LOW AS POSSIBLE. THE TABLE CAN BE MANUALLY PULLED OUT ON THE SIDE OF THE MACHINE TO LOAD AND UNLOAD IT.

THE LASER POWER SOURCE (RESONATOR) OF THE HDFL SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.

THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

CAPSULED CUTTING ROOM WITH SAFETY GLASS
LATERAL SHUTTLE TABLE FOR SIMULTANEOUS LOADING/UNLOADING AND CUTTING TO REDUCE THE SECONDARY PROCESSING TIME
CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
- TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
LASER SOURCE I.P.G 4000 (MADE IN GERMANY!)
AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND MORORIZED FOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
REMOTE MAINTENANCE BY LAN CONNECTION
SAFETY LIGHT BARRIER COVERING
LASER SERVICE SET

OPTIONS:

EXHAUST UNIT WITH FILTERS   ? 12.460,-

SCRAP CONVEYOR FOR SMALL PARTS AND WASTE   ? 5.750,-


(VIDEO SHOWS MOD. HD-FL WITH LINEAR MOTORS, MODEL GENERATION 2014)



FIBER LASER HESSE HD-FS MADE BY DURMA

WHEN THE REQUIREMENT IS TO LASER CUT WITH HIGH PERFORMANCE AND PRECISION, THOUGH THE AVAILABLE SPACE IS LIMITED, IT IS A TASK FOR THE MODEL HD-FS. THE CONTROL UNIT IS INTEGRATED IN THE MACHINE TO KEEP THE OVERALL DIMENSIONS AS LOW AS POSSIBLE. THE TABLE CAN BE MANUALLY PULLED OUT ON THE SIDE OF THE MACHINE TO LOAD AND UNLOAD IT.

THE LASER POWER SOURCE (RESONATOR) OF THE HDFL SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.

THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

CAPSULED CUTTING ROOM WITH SAFETY GLASS
LATERAL SHUTTLE TABLE FOR SIMULTANEOUS LOADING/UNLOADING AND CUTTING TO REDUCE THE SECONDARY PROCESSING TIME
CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
- TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
LASER SOURCE I.P.G 2000 (MADE IN GERMANY!)
AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND MORORIZED FOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
REMOTE MAINTENANCE BY LAN CONNECTION
LASER SERVICE SET



CUTTING AREA: 3.100 X 1.550 MM
LASER POWER: 0,4 - 4,0 KW
WAVELENGTH: 1.070 - 1.080 NM
POLARIZATION: RANDOM
MAX. PULSE FREQUENCY: 5,0 KHZ
AVERAGE POWER CONSUMPTION: 33 KWH
APPLICATION RANGE:
MILD STEEL: 16 MM
STAINLESS STEEL: 8 MM
ALUMINIUM: 8 MM
WORKING ANGE:
X-AXIS: 3.100 MM
Y-AXIS: 1.550 MM
Z-AXIS: 125 MM
MAX. SHEET SIZE: 3.000 X 1.500 MM
MAX. SHEET WEIGHT: 1.000 KG
DYNAMIC AND PRECISION:
MAX SPEED X-AXES: 90 M/MIN
MAX SPEED Y-AXES: 90 M/MIN
MAX. SPPED SIMULTANEOUS: 127 M/MIN
MAX. ACCELERATION: 10 M/S²
POSITIONAL ACCURACY: +/- 0,05 MM
REPEATABILITY: +/- 0,05 MM
DIMENSIONS:
LAY-OUT AREA CA.: 9.000 X 7.500 MM
LENGTH: 6.300 MM
WIDTH: 4.860 MM
HEIGHT: 2.300 MM
WEIGHT CA.: 9.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-wartsila 41 mw single cycle power plant with 6 x 16v34sg gas generators - 2008
 
complete running power plant with 6 units of wartsila 16v34sg spark ignited natural gas engine driven generators. the equipment was delivered and commissioned by wartsila in year 2008 and today the units have approx 25 000 operating hours. the equipment is in very good operational condition but the engines need a 24 000 hour overhaul.
 
generators are installed on common base frame with the engines and common base frame is isolated from the foundation by flexible mounting with steel springs. most of the auxiliaries are in the factory built in large new type modules which enable easy relocation of the equipment.
 
the engines are of the four stroke, lean burn, pre chamber, spark ignited, port injected, trunk piston, turbocharged and intercooled design. the engine automation is a complete embedded management system, integrated with an engine control system for electricity controlled fuel injection. the control system is distributed bus based system where monitoring and control function is placed close to measuring and control point. this leads to less wiring and improved performance. the engines are designed for continuous operation in gas mode in island mode at any load between 40 -100% of nominal power
 
main technical data at full load and current site conditions:
 
installed power: 41 820 kw at 31.5 kv, 50 hz
fuel: natural gas
engines: 6 x w16v34sg, running at 750 rpm
alternators: 6 x akv 8712 kva, 11 kv, 50 hz, p.f. 0.8
year of manufacturing: 2008
operating hours: approx 25000 /unit
original heat rate (at alt. term) 8140 kj/kwhe (44.2 %)
plant own consumption: 836 kw
cooling system: closed loop radiators
status: in peak loading operation
condition: very good, operational   WARTSILA 41 MW SINGLE CYCLE POWER PLANT WITH 6 X 16V34SG GAS GENERATORS - 2008 COMPLETE RUNNING POWER PLANT WITH 6 UNITS OF WARTSILA 16V34SG SPARK IGNITED NATURAL GAS ENGINE DRIVEN GENERATORS. THE EQUIPMENT WAS DELIVERED AND COMMISSIONED BY WARTSILA IN YEAR 2008 AND TODAY THE UNITS HAVE APPROX 25 000 OPERATING HOURS. THE EQUIPMENT IS IN VERY GOOD OPERATIONAL CONDITION BUT THE ENGINES NEED A 24 000 HOUR OVERHAUL. GENERATORS ARE INSTALLED ON COMMON BASE FRAME WITH THE ENGINES AND COMMON BASE FRAME IS ISOLATED FROM THE FOUNDATION BY FLEXIBLE MOUNTING WITH STEEL SPRINGS. MOST OF THE AUXILIARIES ARE IN THE FACTORY BUILT IN LARGE NEW TYPE MODULES WHICH ENABLE EASY RELOCATION OF THE EQUIPMENT. THE ENGINES ARE OF THE FOUR STROKE, LEAN BURN, PRE CHAMBER, SPARK IGNITED, PORT INJECTED, TRUNK PISTON, TURBOCHARGED AND INTERCOOLED DESIGN. THE ENGINE AUTOMATION IS A COMPLETE EMBEDDED MANAGEMENT SYSTEM, INTEGRATED WITH AN ENGINE CONTROL SYSTEM FOR ELECTRICITY CONTROLLED FUEL INJECTION. THE CONTROL SYSTEM IS DISTRIBUTED BUS BASED SYSTEM WHERE MONITORING AND CONTROL FUNCTION IS PLACED CLOSE TO MEASURING AND CONTROL POINT. THIS LEADS TO LESS WIRING AND IMPROVED PERFORMANCE. THE ENGINES ARE DESIGNED FOR CONTINUOUS OPERATION IN GAS MODE IN ISLAND MODE AT ANY LOAD BETWEEN 40 -100% OF NOMINAL POWER MAIN TECHNICAL DATA AT FULL LOAD AND CURRENT SITE CONDITIONS: INSTALLED POWER: 41 820 KW AT 31.5 KV, 50 HZ FUEL: NATURAL GAS ENGINES: 6 X W16V34SG, RUNNING AT 750 RPM ALTERNATORS: 6 X AKV 8712 KVA, 11 KV, 50 HZ, P.F. 0.8 YEAR OF MANUFACTURING: 2008 OPERATING HOURS: APPROX 25000 /UNIT ORIGINAL HEAT RATE (AT ALT. TERM) 8140 KJ/KWHE (44.2 %) PLANT OWN CONSUMPTION: 836 KW COOLING SYSTEM: CLOSED LOOP RADIATORS STATUS: IN PEAK LOADING OPERATION CONDITION: VERY GOOD, OPERATIONAL
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 276.450 €
Ubicación: Land-: 3.060 x 1.530 mm<br/>: 1.070 - 1.080 nm<br/>: 5,0 khz<br/>: 25 kwh<br/>: 12 mm<br/>: 6 mm<br/>: 6 mm<br/>: 3.060 mm<br/>: 1.530 mm<br/>: 160 mm<br/>: 3.000 x 1.500 mm<br/>: 1.000 kg<br/>: 11.000 x 6.000 mm<br/>: 9.440 mm<br/>: 2.750 mm<br/>: 2.420 mm<br/>: 12.000 kg<br/>fiber laser hesse hd-f made by durma<br/><br/>the laser power source (resonator) of the hdf series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/><br/><br/>the machine consists of the following components:<br/><br/>capsuled cutting room with safety glass<br/>-x-axis with massive gantry-drive by rack and pinion<br/>-y-axis by rack and pinion <br/>shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time<br/>cnc control siemens sinumerik with grafic display (made in germany!)<br/>- technology and cutting parameter data bank with presettings for common metals<br/>laser source i.p.g. 2000 (made in germany!)<br/>autofocus-cutting head precitec with integrated and adjusted sensor technics and mororized focus position adjustment (made in germany!) <br/>liquid cooler for cutting head and resonator<br/>cad/cam software lantek to program and optimize utilization of material (nesting)<br/>remote maintenance by lan connection<br/>safety light barrier covering<br/>laser service set<br/><br/>options:<br/><br/>exhaust unit with filters   ? 12.460,--<br/><br/>scrap conveyor for small parts and waste   ? 5.750,--<br/><br/><br/>(video shows mod. hd-fl with linear motors, model generation 2014)<br/><br/><br/><br/><br/>cutting area: 3.060 x 1.530 mm <br/>laser power: 0,2 - 2,0 kw <br/>wavelength: 1.070 - 1.080 nm <br/>polarization: random <br/>max. pulse frequency: 5,0 khz <br/>average power consumption: 25 kwh <br/>application range:  <br/>mild steel: 12 mm <br/>stainless steel: 6 mm <br/>aluminium: 6 mm  <br/>working ange:  <br/>x-axis: 3.060 mm <br/>y-axis: 1.530 mm <br/>z-axis: 160 mm<br/>max. sheet size: 3.000 x 1.500 mm<br/>max. sheet weight: 1.000 kg<br/>dynamic and precision:  <br/>max speed x-axes: 120 m/min<br/>max speed y-axes: 120 m/min<br/>max. spped simultaneous: 170 m/min <br/>max. acceleration: 20 m/s² <br/>positional accuracy: +/- 0,05 mm <br/>repeatability: +/- 0,05 mm <br/>lay-out area ca.: 11.000 x 6.000 mm<br/>length: 9.440 mm<br/>width: 2.750 mm<br/>height: 2.420 mm<br/>weight ca.: 12.000 kg<br/><br/><br/><br/> : 3.060 X 1.530 MM
: 1.070 - 1.080 NM
: 5,0 KHZ
: 25 KWH
: 12 MM
: 6 MM
: 6 MM
: 3.060 MM
: 1.530 MM
: 160 MM
: 3.000 X 1.500 MM
: 1.000 KG
: 11.000 X 6.000 MM
: 9.440 MM
: 2.750 MM
: 2.420 MM
: 12.000 KG
FIBER LASER HESSE HD-F MADE BY DURMA

THE LASER POWER SOURCE (RESONATOR) OF THE HDF SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.


THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

CAPSULED CUTTING ROOM WITH SAFETY GLASS
-X-AXIS WITH MASSIVE GANTRY-DRIVE BY RACK AND PINION
-Y-AXIS BY RACK AND PINION
SHUTTLE TABLE FOR SIMULTANEOUS LOADING/UNLOADING AND CUTTING TO REDUCE THE SECONDARY PROCESSING TIME
CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
- TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
LASER SOURCE I.P.G. 2000 (MADE IN GERMANY!)
AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND MORORIZED FOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
REMOTE MAINTENANCE BY LAN CONNECTION
SAFETY LIGHT BARRIER COVERING
LASER SERVICE SET

OPTIONS:

EXHAUST UNIT WITH FILTERS   ? 12.460,--

SCRAP CONVEYOR FOR SMALL PARTS AND WASTE   ? 5.750,--


(VIDEO SHOWS MOD. HD-FL WITH LINEAR MOTORS, MODEL GENERATION 2014)




CUTTING AREA: 3.060 X 1.530 MM
LASER POWER: 0,2 - 2,0 KW
WAVELENGTH: 1.070 - 1.080 NM
POLARIZATION: RANDOM
MAX. PULSE FREQUENCY: 5,0 KHZ
AVERAGE POWER CONSUMPTION: 25 KWH
APPLICATION RANGE:
MILD STEEL: 12 MM
STAINLESS STEEL: 6 MM
ALUMINIUM: 6 MM
WORKING ANGE:
X-AXIS: 3.060 MM
Y-AXIS: 1.530 MM
Z-AXIS: 160 MM
MAX. SHEET SIZE: 3.000 X 1.500 MM
MAX. SHEET WEIGHT: 1.000 KG
DYNAMIC AND PRECISION:
MAX SPEED X-AXES: 120 M/MIN
MAX SPEED Y-AXES: 120 M/MIN
MAX. SPPED SIMULTANEOUS: 170 M/MIN
MAX. ACCELERATION: 20 M/S²
POSITIONAL ACCURACY: +/- 0,05 MM
REPEATABILITY: +/- 0,05 MM
LAY-OUT AREA CA.: 11.000 X 6.000 MM
LENGTH: 9.440 MM
WIDTH: 2.750 MM
HEIGHT: 2.420 MM
WEIGHT CA.: 12.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-closing force: 80t, weight: 3.7t, operational hours: 20,000h.  CLOSING FORCE: 80T, WEIGHT: 3.7T, OPERATIONAL HOURS: 20,000H.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 399.090 €
Ubicación: Land-: 3.060 x 1.530 mm<br/>: 1.070 - 1.080 nm<br/>: 5,0 khz<br/>: 53 kwh<br/>: 20 mm<br/>: 10 mm<br/>: 12 mm<br/>: 3.060 mm<br/>: 1.530 mm<br/>: 160 mm<br/>: 3.000 x 1.500 mm<br/>: 1.000 kg<br/>: 11.000 x 6.000 mm<br/>: 9.440 mm<br/>: 2.750 mm<br/>: 2.420 mm<br/>: 12.000 kg<br/>faserlaser hesse hd-fl made by durma<br/><br/>the laser power source (resonator) of the hdfl series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/><br/><br/><br/>the machine consists of the following components:<br/><br/>capsuled cutting room with safety glass<br/>-x-axis with massive gantry-drive by siemens linear motors<br/>-y-axis by siemens linear motors<br/>shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time<br/>cnc control siemens sinumerik with grafic display (made in germany!)<br/>- technology and cutting parameter data bank with presettings for common metals<br/>laser source i.p.g. 4000 (made in germany!)<br/>autofocus-cutting head precitec with integrated and adjusted sensor technics and mororized focus position adjustment (made in germany!) <br/>liquid cooler for cutting head and resonator<br/>liquid cooler for linear motors<br/>cad/cam software lantek to program and optimize utilization of material (nesting)<br/>remote maintenance by lan connection and wlan<br/>safety light barrier covering<br/>laser service set<br/><br/>options:<br/><br/>exhaust unit with filters ? 12.460,-<br/><br/>scrap conveyor for small parts and waste ? 5.750,-<br/><br/><br/><br/>(video shows model generation 2014)<br/><br/><br/><br/><br/>cutting area: 3.060 x 1.530 mm<br/>laser power: 0,4 - 4,0 kw<br/>wavelength: 1.070 - 1.080 nm<br/>polarization: random<br/>max. pulse frequency: 5,0 khz<br/>average power consumption: 53 kwh<br/>application range:<br/>mild steel: 20 mm<br/>stainless steel: 10 mm<br/>aluminium: 12 mm<br/>copper: 6 mm<br/>brass: 10 mm<br/>working ange:<br/>x-axis: 3.060 mm<br/>y-axis: 1.530 mm<br/>z-axis: 160 mm<br/>max. sheet size: 3.000 x 1.500 mm<br/>max. sheet weight: 1.000 kg<br/>dynamic and precision:<br/>max speed x- and y- axes: 160 m/min<br/>max. spped simultaneous: 226 m/min<br/>max. acceleration: 25 m/s²<br/>positional accuracy: +/- 0,03 mm<br/>repeatability: +/- 0,03 mm<br/>lay-out area ca.: 11.000 x 6.000 mm<br/>length: 9.440 mm<br/>width: 2.750 mm<br/>height: 2.420 mm<br/>weight ca.: 12.000 kg<br/><br/><br/><br/> : 3.060 X 1.530 MM
: 1.070 - 1.080 NM
: 5,0 KHZ
: 53 KWH
: 20 MM
: 10 MM
: 12 MM
: 3.060 MM
: 1.530 MM
: 160 MM
: 3.000 X 1.500 MM
: 1.000 KG
: 11.000 X 6.000 MM
: 9.440 MM
: 2.750 MM
: 2.420 MM
: 12.000 KG
FASERLASER HESSE HD-FL MADE BY DURMA

THE LASER POWER SOURCE (RESONATOR) OF THE HDFL SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.



THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

CAPSULED CUTTING ROOM WITH SAFETY GLASS
-X-AXIS WITH MASSIVE GANTRY-DRIVE BY SIEMENS LINEAR MOTORS
-Y-AXIS BY SIEMENS LINEAR MOTORS
SHUTTLE TABLE FOR SIMULTANEOUS LOADING/UNLOADING AND CUTTING TO REDUCE THE SECONDARY PROCESSING TIME
CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
- TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
LASER SOURCE I.P.G. 4000 (MADE IN GERMANY!)
AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND MORORIZED FOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
LIQUID COOLER FOR LINEAR MOTORS
CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
REMOTE MAINTENANCE BY LAN CONNECTION AND WLAN
SAFETY LIGHT BARRIER COVERING
LASER SERVICE SET

OPTIONS:

EXHAUST UNIT WITH FILTERS ? 12.460,-

SCRAP CONVEYOR FOR SMALL PARTS AND WASTE ? 5.750,-



(VIDEO SHOWS MODEL GENERATION 2014)




CUTTING AREA: 3.060 X 1.530 MM
LASER POWER: 0,4 - 4,0 KW
WAVELENGTH: 1.070 - 1.080 NM
POLARIZATION: RANDOM
MAX. PULSE FREQUENCY: 5,0 KHZ
AVERAGE POWER CONSUMPTION: 53 KWH
APPLICATION RANGE:
MILD STEEL: 20 MM
STAINLESS STEEL: 10 MM
ALUMINIUM: 12 MM
COPPER: 6 MM
BRASS: 10 MM
WORKING ANGE:
X-AXIS: 3.060 MM
Y-AXIS: 1.530 MM
Z-AXIS: 160 MM
MAX. SHEET SIZE: 3.000 X 1.500 MM
MAX. SHEET WEIGHT: 1.000 KG
DYNAMIC AND PRECISION:
MAX SPEED X- AND Y- AXES: 160 M/MIN
MAX. SPPED SIMULTANEOUS: 226 M/MIN
MAX. ACCELERATION: 25 M/S²
POSITIONAL ACCURACY: +/- 0,03 MM
REPEATABILITY: +/- 0,03 MM
LAY-OUT AREA CA.: 11.000 X 6.000 MM
LENGTH: 9.440 MM
WIDTH: 2.750 MM
HEIGHT: 2.420 MM
WEIGHT CA.: 12.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 1.400 €
Ubicación: Land-for sale is a flat grinding machine.
the machine is fully operational.
approximate weight: 1000 kg

dimensions (lxwxh) approx.: 1800 x 1200 x 2000 mm
article description:
-operating voltage: 380 v, 50 hz
-length: 600 mm
-sanding width: 210 mm
-magnetic table: 200 x 600 mm
-total power: 3,0 kw

for more information see nameplate! FOR SALE IS A FLAT GRINDING MACHINE. THE MACHINE IS FULLY OPERATIONAL. APPROXIMATE WEIGHT: 1000 KG DIMENSIONS (LXWXH) APPROX.: 1800 X 1200 X 2000 MM ARTICLE DESCRIPTION: -OPERATING VOLTAGE: 380 V, 50 HZ -LENGTH: 600 MM -SANDING WIDTH: 210 MM -MAGNETIC TABLE: 200 X 600 MM -TOTAL POWER: 3,0 KW FOR MORE INFORMATION SEE NAMEPLATE!
Vendedor: B&W Handelsgesellschaft mbH
Año de construcción: usado
Precio: 324.360 €
Ubicación: Land-: 3.060 x 1.530 mm<br/>: 1.070 - 1.080 nm<br/>: 5,0 khz<br/>: 45 kwh<br/>: 12 mm<br/>: 6 mm<br/>: 6 mm<br/>: 3.060 mm<br/>: 1.530 mm<br/>: 160 mm<br/>: 3.000 x 1.500 mm<br/>: 1.000 kg<br/>: 11.000 x 6.000 mm<br/>: 9.440 mm<br/>: 2.750 mm<br/>: 2.420 mm<br/>: 12.000 kg<br/>fiber laser hesse hd-fl made by durma<br/><br/>the laser power source (resonator) of the hdfl series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/><br/><br/><br/>the machine consists of the following components:<br/><br/>capsuled cutting room with safety glass<br/>-x-axis with massive gantry-drive by siemens linear motors<br/>-y-axis by siemens linear motors<br/>shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time<br/>cnc control siemens sinumerik with grafic display (made in germany!)<br/>- technology and cutting parameter data bank with presettings for common metals<br/>laser source i.p.g. 2000 (made in germany!)<br/>autofocus-cutting head precitec with integrated and adjusted sensor technics and mororized focus position adjustment (made in germany!) <br/>liquid cooler for cutting head and resonator<br/>liquid cooler for linear motors<br/>cad/cam software lantek to program and optimize utilization of material (nesting)<br/>remote maintenance by lan connection<br/>safety light barrier covering<br/>laser service set<br/><br/>options:<br/><br/>exhaust unit with filters ? 12.460,--<br/><br/>scrap conveyor for small parts and waste ? 5.750,--<br/><br/><br/>(video shows model generation 2014)<br/><br/><br/><br/><br/>cutting area: 3.060 x 1.530 mm<br/>laser power: 0,2 - 2,0 kw<br/>wavelength: 1.070 - 1.080 nm<br/>polarization: random<br/>max. pulse frequency: 5,0 khz<br/>average power consumption: 45 kwh<br/>application range:<br/>mild steel: 12 mm<br/>stainless steel: 6 mm<br/>aluminium: 6 mm<br/>copper: 3 mm<br/>brass: 6 mm<br/>working ange:<br/>x-axis: 3.060 mm<br/>y-axis: 1.530 mm<br/>z-axis: 160 mm<br/>max. sheet size: 3.000 x 1.500 mm<br/>max. sheet weight: 1.000 kg<br/>dynamic and precision:<br/>max speed x- and y- axes: 160 m/min<br/>max. spped simultaneous: 226 m/min<br/>max. acceleration: 25 m/s²<br/>positional accuracy: +/- 0,03 mm<br/>repeatability: +/- 0,03 mm<br/>lay-out area ca.: 11.000 x 6.000 mm<br/>length: 9.440 mm<br/>width: 2.750 mm<br/>height: 2.420 mm<br/>weight ca.: 12.000 kg<br/><br/><br/><br/> : 3.060 X 1.530 MM
: 1.070 - 1.080 NM
: 5,0 KHZ
: 45 KWH
: 12 MM
: 6 MM
: 6 MM
: 3.060 MM
: 1.530 MM
: 160 MM
: 3.000 X 1.500 MM
: 1.000 KG
: 11.000 X 6.000 MM
: 9.440 MM
: 2.750 MM
: 2.420 MM
: 12.000 KG
FIBER LASER HESSE HD-FL MADE BY DURMA

THE LASER POWER SOURCE (RESONATOR) OF THE HDFL SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.



THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

CAPSULED CUTTING ROOM WITH SAFETY GLASS
-X-AXIS WITH MASSIVE GANTRY-DRIVE BY SIEMENS LINEAR MOTORS
-Y-AXIS BY SIEMENS LINEAR MOTORS
SHUTTLE TABLE FOR SIMULTANEOUS LOADING/UNLOADING AND CUTTING TO REDUCE THE SECONDARY PROCESSING TIME
CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
- TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
LASER SOURCE I.P.G. 2000 (MADE IN GERMANY!)
AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND MORORIZED FOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
LIQUID COOLER FOR LINEAR MOTORS
CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
REMOTE MAINTENANCE BY LAN CONNECTION
SAFETY LIGHT BARRIER COVERING
LASER SERVICE SET

OPTIONS:

EXHAUST UNIT WITH FILTERS ? 12.460,--

SCRAP CONVEYOR FOR SMALL PARTS AND WASTE ? 5.750,--


(VIDEO SHOWS MODEL GENERATION 2014)




CUTTING AREA: 3.060 X 1.530 MM
LASER POWER: 0,2 - 2,0 KW
WAVELENGTH: 1.070 - 1.080 NM
POLARIZATION: RANDOM
MAX. PULSE FREQUENCY: 5,0 KHZ
AVERAGE POWER CONSUMPTION: 45 KWH
APPLICATION RANGE:
MILD STEEL: 12 MM
STAINLESS STEEL: 6 MM
ALUMINIUM: 6 MM
COPPER: 3 MM
BRASS: 6 MM
WORKING ANGE:
X-AXIS: 3.060 MM
Y-AXIS: 1.530 MM
Z-AXIS: 160 MM
MAX. SHEET SIZE: 3.000 X 1.500 MM
MAX. SHEET WEIGHT: 1.000 KG
DYNAMIC AND PRECISION:
MAX SPEED X- AND Y- AXES: 160 M/MIN
MAX. SPPED SIMULTANEOUS: 226 M/MIN
MAX. ACCELERATION: 25 M/S²
POSITIONAL ACCURACY: +/- 0,03 MM
REPEATABILITY: +/- 0,03 MM
LAY-OUT AREA CA.: 11.000 X 6.000 MM
LENGTH: 9.440 MM
WIDTH: 2.750 MM
HEIGHT: 2.420 MM
WEIGHT CA.: 12.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-steam boiler firetube loos universal ul-s-ie, 16 tons per hour, 16 bar

this boiler is three-pass single-flame tube/smoke tube type and it was delivered in 2003 by loos international. it can produce 16 tons / h saturated steam at 16 bar. it complete boiler with weishaupt low-nox, multifuel burner, economizer, gas control valves, combustion air fan and siemens simatic s7 controls. the boiler is still installed and in good operational condition.

the main characteristics:
made by: loos international in year 2003.
capacity: 16 tons / hour (12 mw), saturated steam
steam parameters: temperature 235 °c, max pressure 16 bar, saturated
burner type: weishaupt wkgl 70/2-a,
burner model: zm-1ln (multifuel, l
burner capacity: min. 1 100 kw - max. 12 000 kw.
fuel: natural gas & light fuel oil   STEAM BOILER FIRETUBE LOOS UNIVERSAL UL-S-IE, 16 TONS PER HOUR, 16 BAR THIS BOILER IS THREE-PASS SINGLE-FLAME TUBE/SMOKE TUBE TYPE AND IT WAS DELIVERED IN 2003 BY LOOS INTERNATIONAL. IT CAN PRODUCE 16 TONS / H SATURATED STEAM AT 16 BAR. IT COMPLETE BOILER WITH WEISHAUPT LOW-NOX, MULTIFUEL BURNER, ECONOMIZER, GAS CONTROL VALVES, COMBUSTION AIR FAN AND SIEMENS SIMATIC S7 CONTROLS. THE BOILER IS STILL INSTALLED AND IN GOOD OPERATIONAL CONDITION. THE MAIN CHARACTERISTICS: MADE BY: LOOS INTERNATIONAL IN YEAR 2003. CAPACITY: 16 TONS / HOUR (12 MW), SATURATED STEAM STEAM PARAMETERS: TEMPERATURE 235 °C, MAX PRESSURE 16 BAR, SATURATED BURNER TYPE: WEISHAUPT WKGL 70/2-A, BURNER MODEL: ZM-1LN (MULTIFUEL, L BURNER CAPACITY: MIN. 1 100 KW - MAX. 12 000 KW. FUEL: NATURAL GAS & LIGHT FUEL OIL
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 534.000 €
Ubicación: Land-: 1.070 - 1.080 nm<br/>: 5,0 khz<br/>: 25 kwh<br/>: 8 mm<br/>: 4 mm<br/>: 6 mm<br/>: 170 mm<br/>: 120 x 120 mm<br/>: 150 x 100 mm<br/>: 8.500 mm<br/>: 3.000 mm<br/>: 185 mm<br/>fiber laser hesse hd-tc made by durma<br/><br/>the laser power source (resonator) of the hd-tc series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/><br/><br/>the machine consists of the following components:<br/><br/>- capsuled cutting room with safety glass<br/>- cnc control siemens sinumerik with grafic display (made in germany!)<br/>   technology and cutting parameter data bank with presettings for common metals<br/>- laser source i.p.g. 2000 (made in germany!)<br/>- autofocus-cutting head precitec with integrated and adjusted sensor technics and<br/>- motorizedfocus position adjustment (made in germany!) <br/>- liquid cooler for cutting head and resonator<br/>- cad/cam software lantek to program and optimize utilization of material (nesting)<br/>- remote maintenance by lan connection<br/>- manual unloading table<br/>- positioning laser<br/><br/><br/>options:<br/><br/>exhaust unit with filters  ? 12.460,-<br/>automatic unloading table<br/> 4 m  ? 46.950,-<br/> 8 m ? 91.020,-<br/>automatic load- and unloading system  ? 71.860,-<br/><br/>(sample photo shows mod. hd-tc 60170)<br/><br/><br/><br/><br/><br/>laser power: 0,2 - 2,0 kw <br/>wavelength: 1.070 - 1.080 nm <br/>polarization: random <br/>max. pulse frequency: 5,0 khz <br/>average power consumption: 25 kwh <br/>application range:  <br/>mild steel: 8 mm <br/>stainless steel: 4 mm <br/>aluminium: 6 mm  <br/>max tube Ø: 170 mm<br/>min. tube Ø: 20 mm (Ø 12 optional)<br/>max. square tube dimension: 120 x 120 mm<br/>max. rectangular tube dimension: 150 x 100 mm<br/>max. tube lenght: 8.500 mm<br/>min. tube lenght (for automatic loading): 3.000 mm<br/>max. tube weight: 37,5 kg/m<br/>automatic infeed: yes<br/>automatic outfeed: yes<br/>amount of chucks: 1<br/>last cut tube lenght: 185 mm<br/>velocity of driver chuck: 90 m/min.<br/>acceleration of driver chuck: 10 m/s2<br/>accuracy: ±0,20 mm<br/>positioning accuracy: ±0,05 mm<br/>tube types: pipe, square, rectangular, eliptic (h, c, u, l)<br/><br/><br/><br/> : 1.070 - 1.080 NM
: 5,0 KHZ
: 25 KWH
: 8 MM
: 4 MM
: 6 MM
: 170 MM
: 120 X 120 MM
: 150 X 100 MM
: 8.500 MM
: 3.000 MM
: 185 MM
FIBER LASER HESSE HD-TC MADE BY DURMA

THE LASER POWER SOURCE (RESONATOR) OF THE HD-TC SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.


THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

- CAPSULED CUTTING ROOM WITH SAFETY GLASS
- CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
   TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
- LASER SOURCE I.P.G. 2000 (MADE IN GERMANY!)
- AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND
- MOTORIZEDFOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
- LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
- CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
- REMOTE MAINTENANCE BY LAN CONNECTION
- MANUAL UNLOADING TABLE
- POSITIONING LASER


OPTIONS:

EXHAUST UNIT WITH FILTERS  ? 12.460,-
AUTOMATIC UNLOADING TABLE
 4 M  ? 46.950,-
 8 M ? 91.020,-
AUTOMATIC LOAD- AND UNLOADING SYSTEM  ? 71.860,-

(SAMPLE PHOTO SHOWS MOD. HD-TC 60170)





LASER POWER: 0,2 - 2,0 KW
WAVELENGTH: 1.070 - 1.080 NM
POLARIZATION: RANDOM
MAX. PULSE FREQUENCY: 5,0 KHZ
AVERAGE POWER CONSUMPTION: 25 KWH
APPLICATION RANGE:
MILD STEEL: 8 MM
STAINLESS STEEL: 4 MM
ALUMINIUM: 6 MM
MAX TUBE Ø: 170 MM
MIN. TUBE Ø: 20 MM (Ø 12 OPTIONAL)
MAX. SQUARE TUBE DIMENSION: 120 X 120 MM
MAX. RECTANGULAR TUBE DIMENSION: 150 X 100 MM
MAX. TUBE LENGHT: 8.500 MM
MIN. TUBE LENGHT (FOR AUTOMATIC LOADING): 3.000 MM
MAX. TUBE WEIGHT: 37,5 KG/M
AUTOMATIC INFEED: YES
AUTOMATIC OUTFEED: YES
AMOUNT OF CHUCKS: 1
LAST CUT TUBE LENGHT: 185 MM
VELOCITY OF DRIVER CHUCK: 90 M/MIN.
ACCELERATION OF DRIVER CHUCK: 10 M/S2
ACCURACY: ±0,20 MM
POSITIONING ACCURACY: ±0,05 MM
TUBE TYPES: PIPE, SQUARE, RECTANGULAR, ELIPTIC (H, C, U, L)



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-empty bottle inspector heuft inline ebi with reflexx and spectrum units

the machine was installed in year 2007 and its currently in very good operational condition, it has been last serviced and can be demonstrated to customers. the capacity is 60 000 bph. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. it has complete heuft manuals in english

this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.

sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.

the ebi has optical heuft thread detection system which inspects the screw closure finish on a glass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.

this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.

technical data:
manufacturer: heuft gmbh, germany
year: 9/2007
type: heuft inline ebi with reflexx image processing
model: h8 bsxt b 72
capacity: 60 000 bph
reliability: 99.9 % detection complete heuft manuals in english. this unit can be sold to the market.
total operating hours 12750
total on duty hours 27500   EMPTY BOTTLE INSPECTOR HEUFT INLINE EBI WITH REFLEXX AND SPECTRUM UNITS THE MACHINE WAS INSTALLED IN YEAR 2007 AND ITS CURRENTLY IN VERY GOOD OPERATIONAL CONDITION, IT HAS BEEN LAST SERVICED AND CAN BE DEMONSTRATED TO CUSTOMERS. THE CAPACITY IS 60 000 BPH. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. IT HAS COMPLETE HEUFT MANUALS IN ENGLISH THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON A GLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 9/2007 TYPE: HEUFT INLINE EBI WITH REFLEXX IMAGE PROCESSING MODEL: H8 BSXT B 72 CAPACITY: 60 000 BPH RELIABILITY: 99.9 % DETECTION COMPLETE HEUFT MANUALS IN ENGLISH. THIS UNIT CAN BE SOLD TO THE MARKET. TOTAL OPERATING HOURS 12750 TOTAL ON DUTY HOURS 27500
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 427.600 €
Ubicación: Land-: 1.070 - 1.080 nm<br/>: 5,0 khz<br/>: 25 kwh<br/>: 8 mm<br/>: 4 mm<br/>: 6 mm<br/>: 170 mm<br/>: 120 x 120 mm<br/>: 150 x 100 mm<br/>: 6.500 mm<br/>: 3.000 mm<br/>: 185 mm<br/>fiber laser hesse hd-tc made by durma<br/><br/>the laser power source (resonator) of the hd-tc series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/><br/><br/>the machine consists of the following components:<br/><br/>- capsuled cutting room with safety glass<br/>- cnc control siemens sinumerik with grafic display (made in germany!)<br/>   technology and cutting parameter data bank with presettings for common metals<br/>- laser source i.p.g. 2000 (made in germany!)<br/>- autofocus-cutting head precitec with integrated and adjusted sensor technics and<br/>- motorizedfocus position adjustment (made in germany!) <br/>- liquid cooler for cutting head and resonator<br/>- cad/cam software lantek to program and optimize utilization of material (nesting)<br/>- remote maintenance by lan connection<br/>- manual unloading table<br/>- positioning laser<br/><br/><br/>options:<br/><br/>exhaust unit with filters  ? 9.110,-<br/>automatic unloading table<br/> 4 m  ? 33.540,-<br/> 6 m  ? 47.910,-<br/>automatic load- and unloading system  ? 38.330,-<br/><br/><br/><br/><br/><br/>laser power: 0,2 - 2,0 kw <br/>wavelength: 1.070 - 1.080 nm <br/>polarization: random <br/>max. pulse frequency: 5,0 khz <br/>average power consumption: 25 kwh <br/>application range:  <br/>mild steel: 8 mm <br/>stainless steel: 4 mm <br/>aluminium: 6 mm  <br/>max tube Ø: 170 mm<br/>min. tube Ø: 20 mm (Ø 12 optional)<br/>max. square tube dimension: 120 x 120 mm<br/>max. rectangular tube dimension: 150 x 100 mm<br/>max. tube lenght: 6.500 mm<br/>min. tube lenght (for automatic loading): 3.000 mm<br/>max. tube weight: 37,5 kg/m<br/>automatic infeed: yes<br/>automatic outfeed: yes<br/>amount of chucks: 1<br/>last cut tube lenght: 185 mm<br/>velocity of driver chuck: 90 m/min.<br/>acceleration of driver chuck: 10 m/s2<br/>accuracy: ±0,20 mm<br/>positioning accuracy: ±0,05 mm<br/>tube types: pipe, square, rectangular, eliptic (h, c, u, l)<br/><br/><br/><br/> : 1.070 - 1.080 NM
: 5,0 KHZ
: 25 KWH
: 8 MM
: 4 MM
: 6 MM
: 170 MM
: 120 X 120 MM
: 150 X 100 MM
: 6.500 MM
: 3.000 MM
: 185 MM
FIBER LASER HESSE HD-TC MADE BY DURMA

THE LASER POWER SOURCE (RESONATOR) OF THE HD-TC SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.


THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

- CAPSULED CUTTING ROOM WITH SAFETY GLASS
- CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
   TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
- LASER SOURCE I.P.G. 2000 (MADE IN GERMANY!)
- AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND
- MOTORIZEDFOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
- LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
- CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
- REMOTE MAINTENANCE BY LAN CONNECTION
- MANUAL UNLOADING TABLE
- POSITIONING LASER


OPTIONS:

EXHAUST UNIT WITH FILTERS  ? 9.110,-
AUTOMATIC UNLOADING TABLE
 4 M  ? 33.540,-
 6 M  ? 47.910,-
AUTOMATIC LOAD- AND UNLOADING SYSTEM  ? 38.330,-





LASER POWER: 0,2 - 2,0 KW
WAVELENGTH: 1.070 - 1.080 NM
POLARIZATION: RANDOM
MAX. PULSE FREQUENCY: 5,0 KHZ
AVERAGE POWER CONSUMPTION: 25 KWH
APPLICATION RANGE:
MILD STEEL: 8 MM
STAINLESS STEEL: 4 MM
ALUMINIUM: 6 MM
MAX TUBE Ø: 170 MM
MIN. TUBE Ø: 20 MM (Ø 12 OPTIONAL)
MAX. SQUARE TUBE DIMENSION: 120 X 120 MM
MAX. RECTANGULAR TUBE DIMENSION: 150 X 100 MM
MAX. TUBE LENGHT: 6.500 MM
MIN. TUBE LENGHT (FOR AUTOMATIC LOADING): 3.000 MM
MAX. TUBE WEIGHT: 37,5 KG/M
AUTOMATIC INFEED: YES
AUTOMATIC OUTFEED: YES
AMOUNT OF CHUCKS: 1
LAST CUT TUBE LENGHT: 185 MM
VELOCITY OF DRIVER CHUCK: 90 M/MIN.
ACCELERATION OF DRIVER CHUCK: 10 M/S2
ACCURACY: ±0,20 MM
POSITIONING ACCURACY: ±0,05 MM
TUBE TYPES: PIPE, SQUARE, RECTANGULAR, ELIPTIC (H, C, U, L)



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-power plant 30 mw with man 3 x 12v48/60 hfo diesel generators
 
complete good condition power plant with three identical diesel generators with man b&w 12 cylinder 500 rpm hfo engines and siemens alternators each generating 10 mw / 11 kv / 50 hz. the equipment is manufactured in year 1996, engines has approx 65 000 operating hours and all equipment are very well maintained and in good condition. cooling of engines is arranged with a cooling tower. the plant has siemens made lv and hv (vacuum breakers) equipment, engine control is refurbished to siemens simatic et200 plc. with the delivery, there is plenty of original man spare parts. the complete plant is fully in operational condition and it has detailed service records and original manuals.
 
main technical data:
engine type: man b&w 12v48/60
engine rotating speed: 500 rpm
bore and stroke: 480 / 600 mm
total running hours: approx 65000/engine
fuel: hfo viscosity up to 700 cst at 50c
alternator type: siemens 1dk 11 kv/50hz, cos fee 0.8
fuel oil separators: 3 x westfalia osb 35 - 036 - 066
fuel oil booster unit 3 pcs
fuel oil transfer pumps 3 pcs
lubrication oil separators: 3 x westfalia osb 35 - 96 - 066
lubrication oil filters 3 x automatic and 3 x manual
lubrication oil tank 50 m3
ht and lt heat exchangers: 3 x alfa-laval
steam generators (lfo) 2 x 950 kg (year 2007)
black start unit: cummins 625 kva
lv cabinets siemens
11 kv hv breakers siemens vacuum cb
plant control system: man pc with process screens
dc system controls and batteries (year 2008)
station transformer: 22kv/400v
step up transformer: 11/22 kv
exhaust gas stack 3 x 65 meter with silencers   POWER PLANT 30 MW WITH MAN 3 X 12V48/60 HFO DIESEL GENERATORS COMPLETE GOOD CONDITION POWER PLANT WITH THREE IDENTICAL DIESEL GENERATORS WITH MAN B&W 12 CYLINDER 500 RPM HFO ENGINES AND SIEMENS ALTERNATORS EACH GENERATING 10 MW / 11 KV / 50 HZ. THE EQUIPMENT IS MANUFACTURED IN YEAR 1996, ENGINES HAS APPROX 65 000 OPERATING HOURS AND ALL EQUIPMENT ARE VERY WELL MAINTAINED AND IN GOOD CONDITION. COOLING OF ENGINES IS ARRANGED WITH A COOLING TOWER. THE PLANT HAS SIEMENS MADE LV AND HV (VACUUM BREAKERS) EQUIPMENT, ENGINE CONTROL IS REFURBISHED TO SIEMENS SIMATIC ET200 PLC. WITH THE DELIVERY, THERE IS PLENTY OF ORIGINAL MAN SPARE PARTS. THE COMPLETE PLANT IS FULLY IN OPERATIONAL CONDITION AND IT HAS DETAILED SERVICE RECORDS AND ORIGINAL MANUALS. MAIN TECHNICAL DATA: ENGINE TYPE: MAN B&W 12V48/60 ENGINE ROTATING SPEED: 500 RPM BORE AND STROKE: 480 / 600 MM TOTAL RUNNING HOURS: APPROX 65000/ENGINE FUEL: HFO VISCOSITY UP TO 700 CST AT 50C ALTERNATOR TYPE: SIEMENS 1DK 11 KV/50HZ, COS FEE 0.8 FUEL OIL SEPARATORS: 3 X WESTFALIA OSB 35 - 036 - 066 FUEL OIL BOOSTER UNIT 3 PCS FUEL OIL TRANSFER PUMPS 3 PCS LUBRICATION OIL SEPARATORS: 3 X WESTFALIA OSB 35 - 96 - 066 LUBRICATION OIL FILTERS 3 X AUTOMATIC AND 3 X MANUAL LUBRICATION OIL TANK 50 M3 HT AND LT HEAT EXCHANGERS: 3 X ALFA-LAVAL STEAM GENERATORS (LFO) 2 X 950 KG (YEAR 2007) BLACK START UNIT: CUMMINS 625 KVA LV CABINETS SIEMENS 11 KV HV BREAKERS SIEMENS VACUUM CB PLANT CONTROL SYSTEM: MAN PC WITH PROCESS SCREENS DC SYSTEM CONTROLS AND BATTERIES (YEAR 2008) STATION TRANSFORMER: 22KV/400V STEP UP TRANSFORMER: 11/22 KV EXHAUST GAS STACK 3 X 65 METER WITH SILENCERS
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 265.850 €
Ubicación: Land-: 3.100 x 1.550 mm<br/>: 1.070 - 1.080 nm<br/>: 5,0 khz<br/>: 25 kwh<br/>: 12 mm<br/>: 6 mm<br/>: 6 mm<br/>: 3.100 mm<br/>: 1.550 mm<br/>: 125 mm<br/>: 3.000 x 1.500 mm<br/>: 1.000 kg<br/>: 9.000 x 7.500 mm<br/>: 6.300 mm<br/>: 4.860 mm<br/>: 2.300 mm<br/>: 9.000 kg<br/>fiber laser hesse hd-fs made by durma<br/><br/>when the requirement is to laser cut with high performance and precision, though the available space is limited, it is a task for the model hd-fs. the control unit is integrated in the machine to keep the overall dimensions as low as possible. the table can be manually pulled out on the side of the machine to load and unload it.<br/><br/>the laser power source (resonator) of the hdfl series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/><br/><br/>the machine consists of the following components:<br/><br/>capsuled cutting room with safety glass<br/>lateral shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time<br/>cnc control siemens sinumerik with grafic display (made in germany!)<br/>- technology and cutting parameter data bank with presettings for common metals<br/>laser source i.p.g 2000 (made in germany!)<br/>autofocus-cutting head precitec with integrated and adjusted sensor technics and mororized focus position adjustment (made in germany!) <br/>liquid cooler for cutting head and resonator<br/>cad/cam software lantek to program and optimize utilization of material (nesting)<br/>remote maintenance by lan connection<br/>safety light barrier covering<br/>laser service set<br/><br/>options:<br/><br/>exhaust unit with filters   ? 12.460,-<br/><br/>scrap conveyor for small parts and waste   ? 5.750,-<br/><br/><br/>(video shows mod. hd-fl with linear motors, model generation 2014)<br/><br/><br/><br/><br/>cutting area: 3.100 x 1.550 mm <br/>laser power: 0,2 - 2,0 kw <br/>wavelength: 1.070 - 1.080 nm <br/>polarization: random <br/>max. pulse frequency: 5,0 khz <br/>average power consumption: 25 kwh <br/>application range:  <br/>mild steel: 12 mm <br/>stainless steel: 6 mm <br/>aluminium: 6 mm <br/>working ange:  <br/>x-axis: 3.100 mm <br/>y-axis: 1.550 mm <br/>z-axis: 125 mm<br/>max. sheet size: 3.000 x 1.500 mm<br/>max. sheet weight: 1.000 kg<br/>dynamic and precision:  <br/>max speed x-axes: 90 m/min<br/>max speed y-axes: 90 m/min<br/>max. spped simultaneous: 127 m/min <br/>max. acceleration: 10 m/s² <br/>positional accuracy: +/- 0,05 mm <br/>repeatability: +/- 0,05 mm <br/>dimensions:  <br/>lay-out area ca.: 9.000 x 7.500 mm<br/>length: 6.300 mm<br/>width: 4.860 mm<br/>height: 2.300 mm<br/>weight ca.: 9.000 kg<br/><br/><br/><br/> : 3.100 X 1.550 MM
: 1.070 - 1.080 NM
: 5,0 KHZ
: 25 KWH
: 12 MM
: 6 MM
: 6 MM
: 3.100 MM
: 1.550 MM
: 125 MM
: 3.000 X 1.500 MM
: 1.000 KG
: 9.000 X 7.500 MM
: 6.300 MM
: 4.860 MM
: 2.300 MM
: 9.000 KG
FIBER LASER HESSE HD-FS MADE BY DURMA

WHEN THE REQUIREMENT IS TO LASER CUT WITH HIGH PERFORMANCE AND PRECISION, THOUGH THE AVAILABLE SPACE IS LIMITED, IT IS A TASK FOR THE MODEL HD-FS. THE CONTROL UNIT IS INTEGRATED IN THE MACHINE TO KEEP THE OVERALL DIMENSIONS AS LOW AS POSSIBLE. THE TABLE CAN BE MANUALLY PULLED OUT ON THE SIDE OF THE MACHINE TO LOAD AND UNLOAD IT.

THE LASER POWER SOURCE (RESONATOR) OF THE HDFL SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.


THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

CAPSULED CUTTING ROOM WITH SAFETY GLASS
LATERAL SHUTTLE TABLE FOR SIMULTANEOUS LOADING/UNLOADING AND CUTTING TO REDUCE THE SECONDARY PROCESSING TIME
CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
- TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
LASER SOURCE I.P.G 2000 (MADE IN GERMANY!)
AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND MORORIZED FOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
REMOTE MAINTENANCE BY LAN CONNECTION
SAFETY LIGHT BARRIER COVERING
LASER SERVICE SET

OPTIONS:

EXHAUST UNIT WITH FILTERS   ? 12.460,-

SCRAP CONVEYOR FOR SMALL PARTS AND WASTE   ? 5.750,-


(VIDEO SHOWS MOD. HD-FL WITH LINEAR MOTORS, MODEL GENERATION 2014)




CUTTING AREA: 3.100 X 1.550 MM
LASER POWER: 0,2 - 2,0 KW
WAVELENGTH: 1.070 - 1.080 NM
POLARIZATION: RANDOM
MAX. PULSE FREQUENCY: 5,0 KHZ
AVERAGE POWER CONSUMPTION: 25 KWH
APPLICATION RANGE:
MILD STEEL: 12 MM
STAINLESS STEEL: 6 MM
ALUMINIUM: 6 MM
WORKING ANGE:
X-AXIS: 3.100 MM
Y-AXIS: 1.550 MM
Z-AXIS: 125 MM
MAX. SHEET SIZE: 3.000 X 1.500 MM
MAX. SHEET WEIGHT: 1.000 KG
DYNAMIC AND PRECISION:
MAX SPEED X-AXES: 90 M/MIN
MAX SPEED Y-AXES: 90 M/MIN
MAX. SPPED SIMULTANEOUS: 127 M/MIN
MAX. ACCELERATION: 10 M/S²
POSITIONAL ACCURACY: +/- 0,05 MM
REPEATABILITY: +/- 0,05 MM
DIMENSIONS:
LAY-OUT AREA CA.: 9.000 X 7.500 MM
LENGTH: 6.300 MM
WIDTH: 4.860 MM
HEIGHT: 2.300 MM
WEIGHT CA.: 9.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-oil free screw air compressor atlas-copco zr 250 with mb 600 desiccant dryer
 
the compressor is water cooled and totally oil free two stage screw compressor with inter- and after coolers. package includes also md adsorption dryer for out let air which don't need any external energy (purge air). the equipment is a sound canopy and it is controlled with advanced eletronikon control system. the compressor in good operational condition, it has ce marking and it is still installed and can be tested. running video available
 
technical data
manufactured by: atlas copco belgium
made in year: 1997
type: zr 250
serial number: atf 053886
total operation hours: 64200
loaded hours: 50700
capacity (fad): 37.7 m3/min at 10.0 bar
electric motor: 250 kw
compressor rotating speed: 1485 rpm
air dryer: atlas-copco md 600, sr no aio 009885
compressor dimensions: 4.34 x 2.00 x 1.65 m (l x h x w)
weight - compressor 5360 kg   OIL FREE SCREW AIR COMPRESSOR ATLAS-COPCO ZR 250 WITH MB 600 DESICCANT DRYER THE COMPRESSOR IS WATER COOLED AND TOTALLY OIL FREE TWO STAGE SCREW COMPRESSOR WITH INTER- AND AFTER COOLERS. PACKAGE INCLUDES ALSO MD ADSORPTION DRYER FOR OUT LET AIR WHICH DON'T NEED ANY EXTERNAL ENERGY (PURGE AIR). THE EQUIPMENT IS A SOUND CANOPY AND IT IS CONTROLLED WITH ADVANCED ELETRONIKON CONTROL SYSTEM. THE COMPRESSOR IN GOOD OPERATIONAL CONDITION, IT HAS CE MARKING AND IT IS STILL INSTALLED AND CAN BE TESTED. RUNNING VIDEO AVAILABLE TECHNICAL DATA MANUFACTURED BY: ATLAS COPCO BELGIUM MADE IN YEAR: 1997 TYPE: ZR 250 SERIAL NUMBER: ATF 053886 TOTAL OPERATION HOURS: 64200 LOADED HOURS: 50700 CAPACITY (FAD): 37.7 M3/MIN AT 10.0 BAR ELECTRIC MOTOR: 250 KW COMPRESSOR ROTATING SPEED: 1485 RPM AIR DRYER: ATLAS-COPCO MD 600, SR NO AIO 009885 COMPRESSOR DIMENSIONS: 4.34 X 2.00 X 1.65 M (L X H X W) WEIGHT - COMPRESSOR 5360 KG
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 294.590 €
Ubicación: Land-: 3.100 x 1.550 mm<br/>: 1.070 - 1.080 nm<br/>: 5,0 khz<br/>: 28 kwh<br/>: 16 mm<br/>: 8 mm<br/>: 8 mm<br/>: 3.100 mm<br/>: 1.550 mm<br/>: 125 mm<br/>: 3.000 x 1.500 mm<br/>: 1.000 kg<br/>: 9.000 x 7.500 mm<br/>: 6.300 mm<br/>: 4.860 mm<br/>: 2.300 mm<br/>: 9.000 kg<br/>fiber laser hesse hd-fs made by durma<br/><br/>when the requirement is to laser cut with high performance and precision, though the available space is limited, it is a task for the model hd-fs. the control unit is integrated in the machine to keep the overall dimensions as low as possible. the table can be manually pulled out on the side of the machine to load and unload it.<br/><br/>the laser power source (resonator) of the hdfl series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/> <br/>the machine consists of the following components:<br/><br/>capsuled cutting room with safety glass<br/>lateral shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time<br/>cnc control siemens sinumerik with grafic display (made in germany!)<br/>- technology and cutting parameter data bank with presettings for common metals<br/>laser source i.p.g 3000 (made in germany!)<br/>autofocus-cutting head precitec with integrated and adjusted sensor technics and mororized focus position adjustment (made in germany!) <br/>liquid cooler for cutting head and resonator<br/>cad/cam software lantek to program and optimize utilization of material (nesting)<br/>remote maintenance by lan connection<br/>safety light barrier covering<br/>laser service set<br/><br/>options:<br/><br/>exhaust unit with filters   ? 12.460,-<br/><br/>scrap conveyor for small parts and waste   ? 5.750,-<br/><br/><br/>(video shows mod. hd-fl with linear motors, model generation 2014)<br/><br/><br/><br/><br/><br/>cutting area: 3.100 x 1.550 mm <br/>laser power: 0,3 - 3,0 kw <br/>wavelength: 1.070 - 1.080 nm <br/>polarization: random <br/>max. pulse frequency: 5,0 khz <br/>average power consumption: 28 kwh <br/>application range:  <br/>mild steel: 16 mm <br/>stainless steel: 8 mm <br/>aluminium: 8 mm <br/>working ange:  <br/>x-axis: 3.100 mm <br/>y-axis: 1.550 mm <br/>z-axis: 125 mm<br/>max. sheet size: 3.000 x 1.500 mm<br/>max. sheet weight: 1.000 kg<br/>dynamic and precision:  <br/>max speed x-axes: 90 m/min<br/>max speed y-axes: 90 m/min<br/>max. spped simultaneous: 127 m/min <br/>max. acceleration: 10 m/s² <br/>positional accuracy: +/- 0,05 mm <br/>repeatability: +/- 0,05 mm <br/>dimensions:  <br/>lay-out area ca.: 9.000 x 7.500 mm<br/>length: 6.300 mm<br/>width: 4.860 mm<br/>height: 2.300 mm<br/>weight ca.: 9.000 kg<br/><br/><br/><br/> : 3.100 X 1.550 MM
: 1.070 - 1.080 NM
: 5,0 KHZ
: 28 KWH
: 16 MM
: 8 MM
: 8 MM
: 3.100 MM
: 1.550 MM
: 125 MM
: 3.000 X 1.500 MM
: 1.000 KG
: 9.000 X 7.500 MM
: 6.300 MM
: 4.860 MM
: 2.300 MM
: 9.000 KG
FIBER LASER HESSE HD-FS MADE BY DURMA

WHEN THE REQUIREMENT IS TO LASER CUT WITH HIGH PERFORMANCE AND PRECISION, THOUGH THE AVAILABLE SPACE IS LIMITED, IT IS A TASK FOR THE MODEL HD-FS. THE CONTROL UNIT IS INTEGRATED IN THE MACHINE TO KEEP THE OVERALL DIMENSIONS AS LOW AS POSSIBLE. THE TABLE CAN BE MANUALLY PULLED OUT ON THE SIDE OF THE MACHINE TO LOAD AND UNLOAD IT.

THE LASER POWER SOURCE (RESONATOR) OF THE HDFL SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.

THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

CAPSULED CUTTING ROOM WITH SAFETY GLASS
LATERAL SHUTTLE TABLE FOR SIMULTANEOUS LOADING/UNLOADING AND CUTTING TO REDUCE THE SECONDARY PROCESSING TIME
CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
- TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
LASER SOURCE I.P.G 3000 (MADE IN GERMANY!)
AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND MORORIZED FOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
REMOTE MAINTENANCE BY LAN CONNECTION
SAFETY LIGHT BARRIER COVERING
LASER SERVICE SET

OPTIONS:

EXHAUST UNIT WITH FILTERS   ? 12.460,-

SCRAP CONVEYOR FOR SMALL PARTS AND WASTE   ? 5.750,-


(VIDEO SHOWS MOD. HD-FL WITH LINEAR MOTORS, MODEL GENERATION 2014)





CUTTING AREA: 3.100 X 1.550 MM
LASER POWER: 0,3 - 3,0 KW
WAVELENGTH: 1.070 - 1.080 NM
POLARIZATION: RANDOM
MAX. PULSE FREQUENCY: 5,0 KHZ
AVERAGE POWER CONSUMPTION: 28 KWH
APPLICATION RANGE:
MILD STEEL: 16 MM
STAINLESS STEEL: 8 MM
ALUMINIUM: 8 MM
WORKING ANGE:
X-AXIS: 3.100 MM
Y-AXIS: 1.550 MM
Z-AXIS: 125 MM
MAX. SHEET SIZE: 3.000 X 1.500 MM
MAX. SHEET WEIGHT: 1.000 KG
DYNAMIC AND PRECISION:
MAX SPEED X-AXES: 90 M/MIN
MAX SPEED Y-AXES: 90 M/MIN
MAX. SPPED SIMULTANEOUS: 127 M/MIN
MAX. ACCELERATION: 10 M/S²
POSITIONAL ACCURACY: +/- 0,05 MM
REPEATABILITY: +/- 0,05 MM
DIMENSIONS:
LAY-OUT AREA CA.: 9.000 X 7.500 MM
LENGTH: 6.300 MM
WIDTH: 4.860 MM
HEIGHT: 2.300 MM
WEIGHT CA.: 9.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-this high capacity innoket kl 2080 labeling machine was manufactured in year 2005 by khs gmbh, germany and it is dismantled in year 2013. this labelette has two stations for cold glue labeling system and it suits both for paper and foil applications. this has been used for glass bottles front-back-neck labels. it is controlled by siemens s7 plc combined with khs touch screen operator interface. labeler machine is in good operational condition. note: this labeller has no label orientation unit

technical information:
manufacturer's type: innoket kl 2080/120 - 48 lm gt
manufacturing year: 2005
code number: 1143
capacity: glass bottles 60000 bph
control plc: simatic s7 / 300
operator panel: khs touch screen
frequency converters: danfoss vlt 5000   THIS HIGH CAPACITY INNOKET KL 2080 LABELING MACHINE WAS MANUFACTURED IN YEAR 2005 BY KHS GMBH, GERMANY AND IT IS DISMANTLED IN YEAR 2013. THIS LABELETTE HAS TWO STATIONS FOR COLD GLUE LABELING SYSTEM AND IT SUITS BOTH FOR PAPER AND FOIL APPLICATIONS. THIS HAS BEEN USED FOR GLASS BOTTLES FRONT-BACK-NECK LABELS. IT IS CONTROLLED BY SIEMENS S7 PLC COMBINED WITH KHS TOUCH SCREEN OPERATOR INTERFACE. LABELER MACHINE IS IN GOOD OPERATIONAL CONDITION. NOTE: THIS LABELLER HAS NO LABEL ORIENTATION UNIT TECHNICAL INFORMATION: MANUFACTURER'S TYPE: INNOKET KL 2080/120 - 48 LM GT MANUFACTURING YEAR: 2005 CODE NUMBER: 1143 CAPACITY: GLASS BOTTLES 60000 BPH CONTROL PLC: SIMATIC S7 / 300 OPERATOR PANEL: KHS TOUCH SCREEN FREQUENCY CONVERTERS: DANFOSS VLT 5000
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-cnc drilling and dowel inserting machine
brand: weeke
type: optimat abd 100
year: 2007

basic machine:
- robust basic construction
- axis movement in x-direction
- toothed rack drice in x-direction
- highly dynamic ac-servomotor for x-movement
- crosswise support in z-direction manual adjustable
- drilling depth in y-direction manual adjustable
- suppoert table with stop on left and right hand side as well as rear fence stop
- 4 clamping cylinders from top, manual adjustable
- central lubrification

workpiece dimensions:
length: max.1.250 mm, min. 20mm
width: max. 800mm, min 50mm,
thickness: max. 60mm, min 10mm

equipment: 
drilling gear with 3 horizontal spindles, spindles are single selectable, 32mm distance

glue- and dowel inserting unit
- 1 dowel tool (32mm distance to the drillingspindel)
- glue nozzle with adjustable glue quantity
- standard dowel dimensions: 8 x 35mm
- vibrational comveyor for automatical dowel supply
- glue monitoring on each nozzle

barcode-reader hand scanner without display
barcodesoftware

ethernet connection


note:
the specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding.
CNC DRILLING AND DOWEL INSERTING MACHINE BRAND: WEEKE TYPE: OPTIMAT ABD 100 YEAR: 2007 BASIC MACHINE: - ROBUST BASIC CONSTRUCTION - AXIS MOVEMENT IN X-DIRECTION - TOOTHED RACK DRICE IN X-DIRECTION - HIGHLY DYNAMIC AC-SERVOMOTOR FOR X-MOVEMENT - CROSSWISE SUPPORT IN Z-DIRECTION MANUAL ADJUSTABLE - DRILLING DEPTH IN Y-DIRECTION MANUAL ADJUSTABLE - SUPPOERT TABLE WITH STOP ON LEFT AND RIGHT HAND SIDE AS WELL AS REAR FENCE STOP - 4 CLAMPING CYLINDERS FROM TOP, MANUAL ADJUSTABLE - CENTRAL LUBRIFICATION WORKPIECE DIMENSIONS: LENGTH: MAX.1.250 MM, MIN. 20MM WIDTH: MAX. 800MM, MIN 50MM, THICKNESS: MAX. 60MM, MIN 10MM EQUIPMENT: DRILLING GEAR WITH 3 HORIZONTAL SPINDLES, SPINDLES ARE SINGLE SELECTABLE, 32MM DISTANCE GLUE- AND DOWEL INSERTING UNIT - 1 DOWEL TOOL (32MM DISTANCE TO THE DRILLINGSPINDEL) - GLUE NOZZLE WITH ADJUSTABLE GLUE QUANTITY - STANDARD DOWEL DIMENSIONS: 8 X 35MM - VIBRATIONAL COMVEYOR FOR AUTOMATICAL DOWEL SUPPLY - GLUE MONITORING ON EACH NOZZLE BARCODE-READER HAND SCANNER WITHOUT DISPLAY BARCODESOFTWARE ETHERNET CONNECTION NOTE: THE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-automatic line for non-alcohol beer production from the normal filtered beer.

two identical plants to produce non-alcoholic beer from normal filtered beer by utilizing microfiltration production technology. the production lines were installed in year 2001 and they are still installed and in good operational condition.

beer is pumped through the microfilter under pressure, water and flavors pass through the microfilter, but alcohol molecules remain on the filter surface and then wash off with the water. after the water with alcohol goes to distillation column, where alcohol separates from the water. water after separation returns back into the system for reuse. both lines has original capacity of 20 hl unfiltered beer but due to capacity decrease of wood framed filters, currently microfilters work with capacity up to 10 hl/h. the cost of replacement new type (plastic) microfilters is about 320 thousand euros. lifetime of new microfilters is about 10 years. otherwise the equipment is in very good condition and immediately available.

technical data

- manufacturer apv
- year of manufacture 2001
- filter type microdyn-nadir dp 100 fp/s
- capacity 2 x 20 hl/h original


list of equipment:
- set of microfilters, 48 pieces with their stainless steel supports and piping
- rectification column with boiler, pumps and valves
- water purification system
- water tank
- cip
- control cabinets
- samplers
- pipes, pumps, valves etc.

note: the heat exchanger and the cooling tower remain at the plant and they are not included in the scope of supply.   AUTOMATIC LINE FOR NON-ALCOHOL BEER PRODUCTION FROM THE NORMAL FILTERED BEER. TWO IDENTICAL PLANTS TO PRODUCE NON-ALCOHOLIC BEER FROM NORMAL FILTERED BEER BY UTILIZING MICROFILTRATION PRODUCTION TECHNOLOGY. THE PRODUCTION LINES WERE INSTALLED IN YEAR 2001 AND THEY ARE STILL INSTALLED AND IN GOOD OPERATIONAL CONDITION. BEER IS PUMPED THROUGH THE MICROFILTER UNDER PRESSURE, WATER AND FLAVORS PASS THROUGH THE MICROFILTER, BUT ALCOHOL MOLECULES REMAIN ON THE FILTER SURFACE AND THEN WASH OFF WITH THE WATER. AFTER THE WATER WITH ALCOHOL GOES TO DISTILLATION COLUMN, WHERE ALCOHOL SEPARATES FROM THE WATER. WATER AFTER SEPARATION RETURNS BACK INTO THE SYSTEM FOR REUSE. BOTH LINES HAS ORIGINAL CAPACITY OF 20 HL UNFILTERED BEER BUT DUE TO CAPACITY DECREASE OF WOOD FRAMED FILTERS, CURRENTLY MICROFILTERS WORK WITH CAPACITY UP TO 10 HL/H. THE COST OF REPLACEMENT NEW TYPE (PLASTIC) MICROFILTERS IS ABOUT 320 THOUSAND EUROS. LIFETIME OF NEW MICROFILTERS IS ABOUT 10 YEARS. OTHERWISE THE EQUIPMENT IS IN VERY GOOD CONDITION AND IMMEDIATELY AVAILABLE. TECHNICAL DATA - MANUFACTURER APV - YEAR OF MANUFACTURE 2001 - FILTER TYPE MICRODYN-NADIR DP 100 FP/S - CAPACITY 2 X 20 HL/H ORIGINAL LIST OF EQUIPMENT: - SET OF MICROFILTERS, 48 PIECES WITH THEIR STAINLESS STEEL SUPPORTS AND PIPING - RECTIFICATION COLUMN WITH BOILER, PUMPS AND VALVES - WATER PURIFICATION SYSTEM - WATER TANK - CIP - CONTROL CABINETS - SAMPLERS - PIPES, PUMPS, VALVES ETC. NOTE: THE HEAT EXCHANGER AND THE COOLING TOWER REMAIN AT THE PLANT AND THEY ARE NOT INCLUDED IN THE SCOPE OF SUPPLY.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-sawing-, drilling and dowel inserting machine\r\nbrand: koch\r\ntype: centronic\r\nyear: 2001\r\n\r\ntechnical data:\r\n\r\nworkpiece dimensions:\r\nlength: 188-1800mm\r\nwidth:\r\n- 20-150mm at 2 workpieces each field\r\n- 100mm at 2 workpieces each field, at 45 °\r\n- 300mm at 1 workpiece each field\r\nthickness: 10-40mm\r\n\r\nstandard equipment:\r\n- 1 saw unit\r\n2,2 kw, 2800 rpm., saw blade clamp with quick change system, braking device for saw motor\r\nscoring saw 1,5 kw, 2800 u/min\r\n\r\n- 1 horizontal drilling unit\r\n2 kw, driller rotation speed 2800 rpm\r\nwith dowel hole blowing\r\n1 piece dowel hole driller\r\nhorizontal drilling distance over supporting table (z): max. 50mm\r\n\r\n- glue application- and dowel inserting station\r\n1 single dowel tool\r\ndowel-Ø 8mm\r\ndowel length 30mm\r\ndowel overhang 7-14mm\r\nadjusted on 14mm\r\n\r\n- 1 vibrational conveyor\r\n- electr. glue monitoring elc\r\n- glue pump 1:1\r\n- digital display for drilling depth and dowel overhang\r\n- workpiece supporting table\r\nseperate swivable 25° to the bottom\r\n2 fences 45°-90° turnable, back stops wit led-display\r\n- 2 work fields\r\neach workfield can be fed with 2 workpieces\r\n- central lubrification\r\n- telephone modem for remote diagnosis\r\n- foot switch for working cycle stop\r\n\r\nkoch numeric with 1 nc-axis (x)\r\n\r\ncompressed air supply: 7 bar\r\nsuction air speed: approx. 30m/sec\r\n\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding.\r\n SAWING-, DRILLING AND DOWEL INSERTING MACHINE\R\NBRAND: KOCH\R\NTYPE: CENTRONIC\R\NYEAR: 2001\R\N\R\NTECHNICAL DATA:\R\N\R\NWORKPIECE DIMENSIONS:\R\NLENGTH: 188-1800MM\R\NWIDTH:\R\N- 20-150MM AT 2 WORKPIECES EACH FIELD\R\N- 100MM AT 2 WORKPIECES EACH FIELD, AT 45 °\R\N- 300MM AT 1 WORKPIECE EACH FIELD\R\NTHICKNESS: 10-40MM\R\N\R\NSTANDARD EQUIPMENT:\R\N- 1 SAW UNIT\R\N2,2 KW, 2800 RPM., SAW BLADE CLAMP WITH QUICK CHANGE SYSTEM, BRAKING DEVICE FOR SAW MOTOR\R\NSCORING SAW 1,5 KW, 2800 U/MIN\R\N\R\N- 1 HORIZONTAL DRILLING UNIT\R\N2 KW, DRILLER ROTATION SPEED 2800 RPM\R\NWITH DOWEL HOLE BLOWING\R\N1 PIECE DOWEL HOLE DRILLER\R\NHORIZONTAL DRILLING DISTANCE OVER SUPPORTING TABLE (Z): MAX. 50MM\R\N\R\N- GLUE APPLICATION- AND DOWEL INSERTING STATION\R\N1 SINGLE DOWEL TOOL\R\NDOWEL-Ø 8MM\R\NDOWEL LENGTH 30MM\R\NDOWEL OVERHANG 7-14MM\R\NADJUSTED ON 14MM\R\N\R\N- 1 VIBRATIONAL CONVEYOR\R\N- ELECTR. GLUE MONITORING ELC\R\N- GLUE PUMP 1:1\R\N- DIGITAL DISPLAY FOR DRILLING DEPTH AND DOWEL OVERHANG\R\N- WORKPIECE SUPPORTING TABLE\R\NSEPERATE SWIVABLE 25° TO THE BOTTOM\R\N2 FENCES 45°-90° TURNABLE, BACK STOPS WIT LED-DISPLAY\R\N- 2 WORK FIELDS\R\NEACH WORKFIELD CAN BE FED WITH 2 WORKPIECES\R\N- CENTRAL LUBRIFICATION\R\N- TELEPHONE MODEM FOR REMOTE DIAGNOSIS\R\N- FOOT SWITCH FOR WORKING CYCLE STOP\R\N\R\NKOCH NUMERIC WITH 1 NC-AXIS (X)\R\N\R\NCOMPRESSED AIR SUPPLY: 7 BAR\R\NSUCTION AIR SPEED: APPROX. 30M/SEC\R\N\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-max. load: 1.5t, weight: 2.765t, operational hours: ca. 2900h.  MAX. LOAD: 1.5T, WEIGHT: 2.765T, OPERATIONAL HOURS: CA. 2900H.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-bag length: 800 <br/>bag width: 582 <br/>work impulse: 100 <br/>table-size: 850 x 560 mm<br/>band width: 5/6/8/10/12 mm<br/>clamping range: ca. 100 - 600 n<br/>cycle time: 5 - 6 sec<br/>total power requirement: 0,50 kw<br/>this is a mobile packing station for rational strapping<br/>bundles and packages of different dimensions with plastic tape.<br/>machine can be demonstrated under power.<br/><br/><br/><br/><br/> BAG LENGTH: 800
BAG WIDTH: 582
WORK IMPULSE: 100
TABLE-SIZE: 850 X 560 MM
BAND WIDTH: 5/6/8/10/12 MM
CLAMPING RANGE: CA. 100 - 600 N
CYCLE TIME: 5 - 6 SEC
TOTAL POWER REQUIREMENT: 0,50 KW
THIS IS A MOBILE PACKING STATION FOR RATIONAL STRAPPING
BUNDLES AND PACKAGES OF DIFFERENT DIMENSIONS WITH PLASTIC TAPE.
MACHINE CAN BE DEMONSTRATED UNDER POWER.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-max. rotational speed: 2500/min, max. capacity: 80kg, inner drum diameter: 500mm, inner drum height: 603mm, wall thickness: 16mm, machine has only a few hundred operational hours.  MAX. ROTATIONAL SPEED: 2500/MIN, MAX. CAPACITY: 80KG, INNER DRUM DIAMETER: 500MM, INNER DRUM HEIGHT: 603MM, WALL THICKNESS: 16MM, MACHINE HAS ONLY A FEW HUNDRED OPERATIONAL HOURS.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-description:<br />\none-storied tunnel pasteurizer consisting of:<br />\n<br />\n<br />\npasteurizer <br />\n<br />\ntotal length (incl. infeed- and outfeed conveyor): 29.600 mm<br />\n<br />\nlength (dimension between axes): 28.325 mm<br />\n<br />\ntotal width (incl. pump box without outfeed conveyor: 4.050 mm<br />\n<br />\nprocessing width: 3.048 mm<br />\n<br />\ntotal height: 2.100 mm<br />\n<br />\ninfeed- outfeed height: 1.100 mm<br />\n<br />\nweight, empty: 14.000 kg<br />\n<br />\noperational weight without product: 23.250 kg<br />\n<br />\n <br />\n<br />\n basis price for negotiation:      500.000,-<br />\n<br />\n(installation/transportation can be inquired sperately)<br />\n<br />\n<br />\nwidth:<br />\n4050 mm<br />\n<br />\nheight:<br />\n2100 mm<br />\n<br />\n<br />\n\r<br />\nbesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines.<br />\r\nyou have a first idea or even a concrete plan? it does not matter how far your project is, we support you in every phase!<br />\r\nor do you want to sell or market your machine? we also buy machines or provide you with a marketing concept.<br />\r\nask for your individual offer or visit us in knetzgau. concerning bigger projects we can of course also visit you in your company to do an on-site survey.<br />\r\nour drink technicians are working worldwide for our customers!<br />\r\nwe are looking forward to hearing from you.<br />\r\n<br />\r\nall information is supplied without guarantee. DESCRIPTION:
\NONE-STORIED TUNNEL PASTEURIZER CONSISTING OF:
\N
\N
\NPASTEURIZER
\N
\NTOTAL LENGTH (INCL. INFEED- AND OUTFEED CONVEYOR): 29.600 MM
\N
\NLENGTH (DIMENSION BETWEEN AXES): 28.325 MM
\N
\NTOTAL WIDTH (INCL. PUMP BOX WITHOUT OUTFEED CONVEYOR: 4.050 MM
\N
\NPROCESSING WIDTH: 3.048 MM
\N
\NTOTAL HEIGHT: 2.100 MM
\N
\NINFEED- OUTFEED HEIGHT: 1.100 MM
\N
\NWEIGHT, EMPTY: 14.000 KG
\N
\NOPERATIONAL WEIGHT WITHOUT PRODUCT: 23.250 KG
\N
\N
\N
\N BASIS PRICE FOR NEGOTIATION: 500.000,-
\N
\N(INSTALLATION/TRANSPORTATION CAN BE INQUIRED SPERATELY)
\N
\N
\NWIDTH:
\N4050 MM
\N
\NHEIGHT:
\N2100 MM
\N
\N
\N\R
\NBESIDES BUYING AND SELLING OF CONVEYORS AND MACHINES OUR STRENGTH LIES PARTICULARLY IN SERVICES AND PROJECT PLANNING, AS FOR EXAMPLE IN REBUILDING AND ADAPTING OF YOUR INSTALLATION AS WELL AS IN OVERHAUL AND RELOCATION OF MACHINES.
\R\NYOU HAVE A FIRST IDEA OR EVEN A CONCRETE PLAN? IT DOES NOT MATTER HOW FAR YOUR PROJECT IS, WE SUPPORT YOU IN EVERY PHASE!
\R\NOR DO YOU WANT TO SELL OR MARKET YOUR MACHINE? WE ALSO BUY MACHINES OR PROVIDE YOU WITH A MARKETING CONCEPT.
\R\NASK FOR YOUR INDIVIDUAL OFFER OR VISIT US IN KNETZGAU. CONCERNING BIGGER PROJECTS WE CAN OF COURSE ALSO VISIT YOU IN YOUR COMPANY TO DO AN ON-SITE SURVEY.
\R\NOUR DRINK TECHNICIANS ARE WORKING WORLDWIDE FOR OUR CUSTOMERS!
\R\NWE ARE LOOKING FORWARD TO HEARING FROM YOU.
\R\N
\R\NALL INFORMATION IS SUPPLIED WITHOUT GUARANTEE.
Vendedor: DRINK Getränkemaschinen GmbH
Año de construcción: usado
Ubicación: Land-screw diameter: 80mm, operational pressure: 210bar, injection force: 2050kn, closing force: 3500kn, opening stroke: 0-700mm, tool installation height: 600-950mm.  SCREW DIAMETER: 80MM, OPERATIONAL PRESSURE: 210BAR, INJECTION FORCE: 2050KN, CLOSING FORCE: 3500KN, OPENING STROKE: 0-700MM, TOOL INSTALLATION HEIGHT: 600-950MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 3.630 EU€
Ubicación: Land-the spreader is in good technical condition. operational damage was found in the form of dirt, residues of manure, traces of corrosion, paint chips and scratches. the tires of all wheels are the same mitas im-04 10.0 / 75 r15,3 with a tread height of 17 mm. THE SPREADER IS IN GOOD TECHNICAL CONDITION. OPERATIONAL DAMAGE WAS FOUND IN THE FORM OF DIRT, RESIDUES OF MANURE, TRACES OF CORROSION, PAINT CHIPS AND SCRATCHES. THE TIRES OF ALL WHEELS ARE THE SAME MITAS IM-04 10.0 / 75 R15,3 WITH A TREAD HEIGHT OF 17 MM.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-plate shear

manufacturer: reinhardt maschinenbau gmbh
type: ras 54.10

with depth stop

brake band and turn wedge was renewed.

the machine is fully operational.

more data, please refer to the rating plate in the annex.

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)   
 PLATE SHEAR MANUFACTURER: REINHARDT MASCHINENBAU GMBH TYPE: RAS 54.10 WITH DEPTH STOP BRAKE BAND AND TURN WEDGE WAS RENEWED. THE MACHINE IS FULLY OPERATIONAL. MORE DATA, PLEASE REFER TO THE RATING PLATE IN THE ANNEX. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-make: trumpf<br/>type of machine:  tubematic<br/>year of manufacture: 2003<br/>control system:  siemens sinumerik 840d<br/>operating time: 39000/9500 h<br/>laser power, w:  3200 watt<br/>width:  8500 mm<br/>operational weight:  11000 kg<br/>sheet thickness: 8 mm<br/>pipe length max.: 6000 mm<br/>dimensions l x w x h: 16000 mm x 2100 mm<br/>max. pipe diameter: 150 mm<br/> MAKE: TRUMPF
TYPE OF MACHINE: TUBEMATIC
YEAR OF MANUFACTURE: 2003
CONTROL SYSTEM: SIEMENS SINUMERIK 840D
OPERATING TIME: 39000/9500 H
LASER POWER, W: 3200 WATT
WIDTH: 8500 MM
OPERATIONAL WEIGHT: 11000 KG
SHEET THICKNESS: 8 MM
PIPE LENGTH MAX.: 6000 MM
DIMENSIONS L X W X H: 16000 MM X 2100 MM
MAX. PIPE DIAMETER: 150 MM
Vendedor: Erdmann Export-Import
Año de construcción: usado
Ubicación: Land- -from above dragging, 1 belt - sanding belt dimensions 1100 mm wide, 1900 mm long, working width 1100 mm - 1 combined contact rollers sanding shoe unit, drive motor 15 kw, with height-adjustable contact roller 85â° shore, and electronically-controlled limb pressure bar, element width d.p.a 50 mm - grinding belt grit compensation contact roller - belt drive with automatic star delta starting and maintenance-free, verschleiã?loser electric brake device optical, airless belt control. 
-pneumatic belt tensioner - belt feed device, powered by infinitely variable geared motor, speeds 2.5-12.5 m / min. and automatic control system for the belt run - led digital display device of the workpiece thickness adjustment- leds indicating the operational readiness - 1 rotating brush at the outlet side of the machine - separated arranged dust suction hoses and nozzles for the sanding belt (dm 200 mm) and the cleaning brush (dm 200 mm) - with complete pneumatic control , including automatic pressure switch, control and monitoring devices - all electrical controls - main switch, fuses, contactor control with motor protection relay, display devices - vde - execution - power consumption: approx. 17 kw -. operating voltage: 380 v, 50 hz. 
 -FROM ABOVE DRAGGING, 1 BELT - SANDING BELT DIMENSIONS 1100 MM WIDE, 1900 MM LONG, WORKING WIDTH 1100 MM - 1 COMBINED CONTACT ROLLERS SANDING SHOE UNIT, DRIVE MOTOR 15 KW, WITH HEIGHT-ADJUSTABLE CONTACT ROLLER 85&ACIRC;&DEG; SHORE, AND ELECTRONICALLY-CONTROLLED LIMB PRESSURE BAR, ELEMENT WIDTH D.P.A 50 MM - GRINDING BELT GRIT COMPENSATION CONTACT ROLLER - BELT DRIVE WITH AUTOMATIC STAR DELTA STARTING AND MAINTENANCE-FREE, VERSCHLEI&ATILDE;?LOSER ELECTRIC BRAKE DEVICE OPTICAL, AIRLESS BELT CONTROL. -PNEUMATIC BELT TENSIONER - BELT FEED DEVICE, POWERED BY INFINITELY VARIABLE GEARED MOTOR, SPEEDS 2.5-12.5 M / MIN. AND AUTOMATIC CONTROL SYSTEM FOR THE BELT RUN - LED DIGITAL DISPLAY DEVICE OF THE WORKPIECE THICKNESS ADJUSTMENT- LEDS INDICATING THE OPERATIONAL READINESS - 1 ROTATING BRUSH AT THE OUTLET SIDE OF THE MACHINE - SEPARATED ARRANGED DUST SUCTION HOSES AND NOZZLES FOR THE SANDING BELT (DM 200 MM) AND THE CLEANING BRUSH (DM 200 MM) - WITH COMPLETE PNEUMATIC CONTROL , INCLUDING AUTOMATIC PRESSURE SWITCH, CONTROL AND MONITORING DEVICES - ALL ELECTRICAL CONTROLS - MAIN SWITCH, FUSES, CONTACTOR CONTROL WITH MOTOR PROTECTION RELAY, DISPLAY DEVICES - VDE - EXECUTION - POWER CONSUMPTION: APPROX. 17 KW -. OPERATING VOLTAGE: 380 V, 50 HZ.
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-operational weight:  ca. 120 kg<br/> OPERATIONAL WEIGHT: CA. 120 KG
Vendedor: Erdmann Export-Import
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more RATIONAL types: