686 ofertas

Año de construcción: usado
Ubicación: Land-cassette for warehouse, about 1,539 cassettes, cassette length 6, 50 m, 3, 000 kg/kasstte - used -:
 
price on request!
 
manufacturer: fehr
year of construction: 2001
cassettes ges. 1,539 units
specification
1 electrically operated double table long good stack machine, automatically controlled, for the storage and retrieval of for good material, with the help of cassettes
technical data:
capacity 2x3000kg
bottom load table position above ground 700 mm
top load table position above ground 12110 mm
room height 13'450 mm
lifting speed 35 m / min
travel speed 80 m / min
pull-out speed 85 m / min
operating voltage, three-phase 400 v / 50 hz
control voltage 230 v / 50 hz
24 v dc
cassette type internal dimensions (wxhxl) a 520 x 270 x 6500 mm
type b 520 x 520 x 6500 mm
device performance at 100% load 46 ds / h
according to fem based on ub-3000 9.851
pull-out force on the cassette gripper (20% of the payload plus cartridge weight)
 
control automatically arranged using an automatic control over operating terminal, at the camp office
1. 1 double-sided track, length approx 29 m
to hang up on the concrete floor, consisting of:
the two rails of a 55, with the shocks, complete with attachment fittings and the limit stops. the rails are with fade-free special grout under poured.
2. 1 longitudinal-power supply, length approx 29 m, consisting of:
vahle plastic conductor line, with guard, complete with the mounting brackets.
3. 1 long goods stacking devices, consisting of:
camp 2 head straps welded design, with the chassis, this consisting of wã¤lzge controlled from the two engines with shaft mounted gearboxes built-on, as well as the 4 - crane wheels, with leadership roles, running laterally on the road,
2 columns in welded box construction, with the guides for the lifters from material performed st 52.3, screwed on the head straps, including the stiffening frame, as well as a ladder of descent,.
1 pallet truck, consisting of: the steel construction with the necessary rubber buffers for the two hã¶henend positions, the roller bearing support and leadership roles, the double cassette table with glides, the extractor, the centering with side guard rails to complete the box, complete with the runners for the gripper, the drive motors, sprockets, shafts, chains and electrical installation,
controls the horizontal, which â«fachbelegtâ».
as a hoist is used:
1 controlled engine
with intermediate gear (designed according to fem 3 m) and drum includes cords and ball-bearing pulleys; security 12, with double-grooved rope drum, dust-protected bearings drum bearing,
rope pulleys conditions according to din 15020.
4. electrical installation, comprising:
-the special cables, including all required terminal boxes, connecting cables fixed installed on the device
-the flexible power supply in cable caterpillar to the trucks,
-completely wired cabinet incl. contactor and the necessary controls, the mushroom-head pushbutton, which shuts off the main contactor (red mushroom can be rotated), switch with push button, key switch
-the two key selector switches, which are used for the pre-selection of the operating modes â«tip operation/automatic modeâ»,
the limit switches for the limitation of the lifting and moving
-the reciprocal locking of lifting and suspension compared to the ausziehvorâ¬
-direction, the laterally mounted clamping wires to the continuous control of the speed profile
-the profile control, which monitors whether the space between the shelf and device is free,
-the output fuse, which prevents that cassettes in a free space be outsourced,
-excess height control, which prevents a training and storage of high-loaded cartridges,
-the control of tape position on the table,
-the fault indicator in the control panel on the lift truck,
-the operating hour counters for driving and lifting mechanism
displacement measuring systems
the wear-free optical measuring system guarantees maximum service life and precise way capture of the x - and y-coordinates. the way capture of the two gripper through the absolute value encoder is located in the millimetre range. both systems deliver the absolutely correct readings again even after a power failure. thus it takes no movements for repositioning and the device starts working immediately without delay.
driving behavior
driving in the x and y axes is such that at the maximum possible speed infinitely variable over short or long distances optimal speed curves are driven. the behavior of the device dimensions at various distances is taken into account and flows as a control variable with a. the pendulum effect is compensated with counteract the driving curve characteristics,
learning functions
the computer software is so forward-looking that hardly a parameterization of various sizes must be done by the programmer. the software adaptation to different design types of device and storage compartments is done through the learning and self-learning onsite. following learning processes take place during commissioning on site:
-self-learning of the xy-driving behavior
-learning of the gripper behavior
-learning the transfer and recording places of the periphery
self learning the topology of all storage compartments of different arrangement and sizes
operating modes
-jog
the long good stacking device in the direction of travel, the truck and the two pull-out devices can be moved with the control buttons.
-semi automatic (automatic start-up), arranged in the stationary cupboard.
with the hand-held micro terminal, various movements are run separately or in combination automatically:
-driving horizontal
vertical lifting/lowering
-pull cassette
-slide tape
-positioning in front of the nearest
option
pc-cabinet for m fs calculator
execution: wxhxd 600 x 1900 x 600 mm
4-field 17 "monitor field of vision
part of front door for computer unit
integrated keyboard tray
storage compartment with removable rails
socket 100 mm
(ii) peripheral components, including:
1 1 carousel ka-3000 gr gr
for cassettes with rods
technical data:
capacity/capacity 3000 kg
number of pitches 4
conveying speed along 24 m / min
cross conveyor speed 40 m / min
height from top of floor 700 mm
operating voltage 400 v / 50 hz
control voltage 230 v / 50 hz
the cartridge space tracking via the automatic control. the carousel consists in particular of:
outsourcing train, consisting of:
-the steel foot plates and anchors, directly on the ground turned off and integrated into the shelf, suitable for the installation of the required mechanical parts
-the spezialgleitem, as well as the lateral guide
-the gripper mechanism, which contains the tape and transported to the next position positively
the gear motor with chain, the sprocket wheels and the chain guide
cross conveyor belt, comprising;
-two cassette courses, one of them as work provided
-the steel construction incl. foot plates and anchors, placed directly on the floor, suitable for the installation of the required mechanical parts
-the special gliders, as well as the lateral guide
-the querverschiebebalken as a driver for the cassettes
-the drive motor with the required drive elements
-the mechanical preparations for the load cells installation at the workplace
storage car, running such as paging railway
electrical control consisting of:
-the control panel with push buttons for all individual movements, including on/off button and emergency push button
-the position and control switches
-power and control supply
-firmly installed control cabinets with built-in control
-the necessary cables, as well as the internal wiring
the safety light barrier incl. mounting brackets, which perceives the person protection during cartridge movement
 
condition: used, the last maintenance was performed in 2017, shortly after it was mined professionally, so that it can be rebuilt at any time. the company which has degraded the plant could perform the installation.
available: available now
location: nuremberg CASSETTE FOR WAREHOUSE, ABOUT 1,539 CASSETTES, CASSETTE LENGTH 6, 50 M, 3, 000 KG/KASSTTE - USED -: PRICE ON REQUEST! MANUFACTURER: FEHR YEAR OF CONSTRUCTION: 2001 CASSETTES GES. 1,539 UNITS SPECIFICATION 1 ELECTRICALLY OPERATED DOUBLE TABLE LONG GOOD STACK MACHINE, AUTOMATICALLY CONTROLLED, FOR THE STORAGE AND RETRIEVAL OF FOR GOOD MATERIAL, WITH THE HELP OF CASSETTES TECHNICAL DATA: CAPACITY 2X3000KG BOTTOM LOAD TABLE POSITION ABOVE GROUND 700 MM TOP LOAD TABLE POSITION ABOVE GROUND 12110 MM ROOM HEIGHT 13'450 MM LIFTING SPEED 35 M / MIN TRAVEL SPEED 80 M / MIN PULL-OUT SPEED 85 M / MIN OPERATING VOLTAGE, THREE-PHASE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ 24 V DC CASSETTE TYPE INTERNAL DIMENSIONS (WXHXL) A 520 X 270 X 6500 MM TYPE B 520 X 520 X 6500 MM DEVICE PERFORMANCE AT 100% LOAD 46 DS / H ACCORDING TO FEM BASED ON UB-3000 9.851 PULL-OUT FORCE ON THE CASSETTE GRIPPER (20% OF THE PAYLOAD PLUS CARTRIDGE WEIGHT) CONTROL AUTOMATICALLY ARRANGED USING AN AUTOMATIC CONTROL OVER OPERATING TERMINAL, AT THE CAMP OFFICE 1. 1 DOUBLE-SIDED TRACK, LENGTH APPROX 29 M TO HANG UP ON THE CONCRETE FLOOR, CONSISTING OF: THE TWO RAILS OF A 55, WITH THE SHOCKS, COMPLETE WITH ATTACHMENT FITTINGS AND THE LIMIT STOPS. THE RAILS ARE WITH FADE-FREE SPECIAL GROUT UNDER POURED. 2. 1 LONGITUDINAL-POWER SUPPLY, LENGTH APPROX 29 M, CONSISTING OF: VAHLE PLASTIC CONDUCTOR LINE, WITH GUARD, COMPLETE WITH THE MOUNTING BRACKETS. 3. 1 LONG GOODS STACKING DEVICES, CONSISTING OF: CAMP 2 HEAD STRAPS WELDED DESIGN, WITH THE CHASSIS, THIS CONSISTING OF WäLZGE CONTROLLED FROM THE TWO ENGINES WITH SHAFT MOUNTED GEARBOXES BUILT-ON, AS WELL AS THE 4 - CRANE WHEELS, WITH LEADERSHIP ROLES, RUNNING LATERALLY ON THE ROAD, 2 COLUMNS IN WELDED BOX CONSTRUCTION, WITH THE GUIDES FOR THE LIFTERS FROM MATERIAL PERFORMED ST 52.3, SCREWED ON THE HEAD STRAPS, INCLUDING THE STIFFENING FRAME, AS WELL AS A LADDER OF DESCENT,. 1 PALLET TRUCK, CONSISTING OF: THE STEEL CONSTRUCTION WITH THE NECESSARY RUBBER BUFFERS FOR THE TWO HöHENEND POSITIONS, THE ROLLER BEARING SUPPORT AND LEADERSHIP ROLES, THE DOUBLE CASSETTE TABLE WITH GLIDES, THE EXTRACTOR, THE CENTERING WITH SIDE GUARD RAILS TO COMPLETE THE BOX, COMPLETE WITH THE RUNNERS FOR THE GRIPPER, THE DRIVE MOTORS, SPROCKETS, SHAFTS, CHAINS AND ELECTRICAL INSTALLATION, CONTROLS THE HORIZONTAL, WHICH «FACHBELEGT». AS A HOIST IS USED: 1 CONTROLLED ENGINE WITH INTERMEDIATE GEAR (DESIGNED ACCORDING TO FEM 3 M) AND DRUM INCLUDES CORDS AND BALL-BEARING PULLEYS; SECURITY 12, WITH DOUBLE-GROOVED ROPE DRUM, DUST-PROTECTED BEARINGS DRUM BEARING, ROPE PULLEYS CONDITIONS ACCORDING TO DIN 15020. 4. ELECTRICAL INSTALLATION, COMPRISING: -THE SPECIAL CABLES, INCLUDING ALL REQUIRED TERMINAL BOXES, CONNECTING CABLES FIXED INSTALLED ON THE DEVICE -THE FLEXIBLE POWER SUPPLY IN CABLE CATERPILLAR TO THE TRUCKS, -COMPLETELY WIRED CABINET INCL. CONTACTOR AND THE NECESSARY CONTROLS, THE MUSHROOM-HEAD PUSHBUTTON, WHICH SHUTS OFF THE MAIN CONTACTOR (RED MUSHROOM CAN BE ROTATED), SWITCH WITH PUSH BUTTON, KEY SWITCH -THE TWO KEY SELECTOR SWITCHES, WHICH ARE USED FOR THE PRE-SELECTION OF THE OPERATING MODES «TIP OPERATION/AUTOMATIC MODE», THE LIMIT SWITCHES FOR THE LIMITATION OF THE LIFTING AND MOVING -THE RECIPROCAL LOCKING OF LIFTING AND SUSPENSION COMPARED TO THE AUSZIEHVOR¬ -DIRECTION, THE LATERALLY MOUNTED CLAMPING WIRES TO THE CONTINUOUS CONTROL OF THE SPEED PROFILE -THE PROFILE CONTROL, WHICH MONITORS WHETHER THE SPACE BETWEEN THE SHELF AND DEVICE IS FREE, -THE OUTPUT FUSE, WHICH PREVENTS THAT CASSETTES IN A FREE SPACE BE OUTSOURCED, -EXCESS HEIGHT CONTROL, WHICH PREVENTS A TRAINING AND STORAGE OF HIGH-LOADED CARTRIDGES, -THE CONTROL OF TAPE POSITION ON THE TABLE, -THE FAULT INDICATOR IN THE CONTROL PANEL ON THE LIFT TRUCK, -THE OPERATING HOUR COUNTERS FOR DRIVING AND LIFTING MECHANISM DISPLACEMENT MEASURING SYSTEMS THE WEAR-FREE OPTICAL MEASURING SYSTEM GUARANTEES MAXIMUM SERVICE LIFE AND PRECISE WAY CAPTURE OF THE X - AND Y-COORDINATES. THE WAY CAPTURE OF THE TWO GRIPPER THROUGH THE ABSOLUTE VALUE ENCODER IS LOCATED IN THE MILLIMETRE RANGE. BOTH SYSTEMS DELIVER THE ABSOLUTELY CORRECT READINGS AGAIN EVEN AFTER A POWER FAILURE. THUS IT TAKES NO MOVEMENTS FOR REPOSITIONING AND THE DEVICE STARTS WORKING IMMEDIATELY WITHOUT DELAY. DRIVING BEHAVIOR DRIVING IN THE X AND Y AXES IS SUCH THAT AT THE MAXIMUM POSSIBLE SPEED INFINITELY VARIABLE OVER SHORT OR LONG DISTANCES OPTIMAL SPEED CURVES ARE DRIVEN. THE BEHAVIOR OF THE DEVICE DIMENSIONS AT VARIOUS DISTANCES IS TAKEN INTO ACCOUNT AND FLOWS AS A CONTROL VARIABLE WITH A. THE PENDULUM EFFECT IS COMPENSATED WITH COUNTERACT THE DRIVING CURVE CHARACTERISTICS, LEARNING FUNCTIONS THE COMPUTER SOFTWARE IS SO FORWARD-LOOKING THAT HARDLY A PARAMETERIZATION OF VARIOUS SIZES MUST BE DONE BY THE PROGRAMMER. THE SOFTWARE ADAPTATION TO DIFFERENT DESIGN TYPES OF DEVICE AND STORAGE COMPARTMENTS IS DONE THROUGH THE LEARNING AND SELF-LEARNING ONSITE. FOLLOWING LEARNING PROCESSES TAKE PLACE DURING COMMISSIONING ON SITE: -SELF-LEARNING OF THE XY-DRIVING BEHAVIOR -LEARNING OF THE GRIPPER BEHAVIOR -LEARNING THE TRANSFER AND RECORDING PLACES OF THE PERIPHERY SELF LEARNING THE TOPOLOGY OF ALL STORAGE COMPARTMENTS OF DIFFERENT ARRANGEMENT AND SIZES OPERATING MODES -JOG THE LONG GOOD STACKING DEVICE IN THE DIRECTION OF TRAVEL, THE TRUCK AND THE TWO PULL-OUT DEVICES CAN BE MOVED WITH THE CONTROL BUTTONS. -SEMI AUTOMATIC (AUTOMATIC START-UP), ARRANGED IN THE STATIONARY CUPBOARD. WITH THE HAND-HELD MICRO TERMINAL, VARIOUS MOVEMENTS ARE RUN SEPARATELY OR IN COMBINATION AUTOMATICALLY: -DRIVING HORIZONTAL VERTICAL LIFTING/LOWERING -PULL CASSETTE -SLIDE TAPE -POSITIONING IN FRONT OF THE NEAREST OPTION PC-CABINET FOR M FS CALCULATOR EXECUTION: WXHXD 600 X 1900 X 600 MM 4-FIELD 17 "MONITOR FIELD OF VISION PART OF FRONT DOOR FOR COMPUTER UNIT INTEGRATED KEYBOARD TRAY STORAGE COMPARTMENT WITH REMOVABLE RAILS SOCKET 100 MM (II) PERIPHERAL COMPONENTS, INCLUDING: 1 1 CAROUSEL KA-3000 GR GR FOR CASSETTES WITH RODS TECHNICAL DATA: CAPACITY/CAPACITY 3000 KG NUMBER OF PITCHES 4 CONVEYING SPEED ALONG 24 M / MIN CROSS CONVEYOR SPEED 40 M / MIN HEIGHT FROM TOP OF FLOOR 700 MM OPERATING VOLTAGE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ THE CARTRIDGE SPACE TRACKING VIA THE AUTOMATIC CONTROL. THE CAROUSEL CONSISTS IN PARTICULAR OF: OUTSOURCING TRAIN, CONSISTING OF: -THE STEEL FOOT PLATES AND ANCHORS, DIRECTLY ON THE GROUND TURNED OFF AND INTEGRATED INTO THE SHELF, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPEZIALGLEITEM, AS WELL AS THE LATERAL GUIDE -THE GRIPPER MECHANISM, WHICH CONTAINS THE TAPE AND TRANSPORTED TO THE NEXT POSITION POSITIVELY THE GEAR MOTOR WITH CHAIN, THE SPROCKET WHEELS AND THE CHAIN GUIDE CROSS CONVEYOR BELT, COMPRISING; -TWO CASSETTE COURSES, ONE OF THEM AS WORK PROVIDED -THE STEEL CONSTRUCTION INCL. FOOT PLATES AND ANCHORS, PLACED DIRECTLY ON THE FLOOR, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPECIAL GLIDERS, AS WELL AS THE LATERAL GUIDE -THE QUERVERSCHIEBEBALKEN AS A DRIVER FOR THE CASSETTES -THE DRIVE MOTOR WITH THE REQUIRED DRIVE ELEMENTS -THE MECHANICAL PREPARATIONS FOR THE LOAD CELLS INSTALLATION AT THE WORKPLACE STORAGE CAR, RUNNING SUCH AS PAGING RAILWAY ELECTRICAL CONTROL CONSISTING OF: -THE CONTROL PANEL WITH PUSH BUTTONS FOR ALL INDIVIDUAL MOVEMENTS, INCLUDING ON/OFF BUTTON AND EMERGENCY PUSH BUTTON -THE POSITION AND CONTROL SWITCHES -POWER AND CONTROL SUPPLY -FIRMLY INSTALLED CONTROL CABINETS WITH BUILT-IN CONTROL -THE NECESSARY CABLES, AS WELL AS THE INTERNAL WIRING THE SAFETY LIGHT BARRIER INCL. MOUNTING BRACKETS, WHICH PERCEIVES THE PERSON PROTECTION DURING CARTRIDGE MOVEMENT CONDITION: USED, THE LAST MAINTENANCE WAS PERFORMED IN 2017, SHORTLY AFTER IT WAS MINED PROFESSIONALLY, SO THAT IT CAN BE REBUILT AT ANY TIME. THE COMPANY WHICH HAS DEGRADED THE PLANT COULD PERFORM THE INSTALLATION. AVAILABLE: AVAILABLE NOW LOCATION: NUREMBERG
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-fabr. fortuna, type record\r\ncap. max. 50 l fresh cream per h\r\n\r\n\r\ncategory: cream cream taps\r\nsales of bakery machines used machines bakery resolution food machine reconditioned condition as it is new FABR. FORTUNA, TYPE RECORD\R\NCAP. MAX. 50 L FRESH CREAM PER H\R\N\R\N\R\NCATEGORY: CREAM CREAM TAPS\R\NSALES OF BAKERY MACHINES USED MACHINES BAKERY RESOLUTION FOOD MACHINE RECONDITIONED CONDITION AS IT IS NEW
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-year 1981, with various removable wheels.
max frã¤sbarer workpiece diameter. 40 mm (46 mm)
max workpiece length 75 mm (110 mm)
max can be milled workpiece length 40 mm
max frã¤sbares module 1
maximum cutter diameter. 32 mm (40 mm)
max milling width 15 mm
shifting 12 mm
spindle tiltable +-6â°
milling cutter speeds of 400-4800 rpm.
radial & axial feed rates of 0-4 mm / sec.
tailstock spindle stroke 30 mm (60 mm)
tailstock moved 61 mm
weight 800 kg
accessories: coolant system, various recordings, feeder rail. YEAR 1981, WITH VARIOUS REMOVABLE WHEELS. MAX FRäSBARER WORKPIECE DIAMETER. 40 MM (46 MM) MAX WORKPIECE LENGTH 75 MM (110 MM) MAX CAN BE MILLED WORKPIECE LENGTH 40 MM MAX FRäSBARES MODULE 1 MAXIMUM CUTTER DIAMETER. 32 MM (40 MM) MAX MILLING WIDTH 15 MM SHIFTING 12 MM SPINDLE TILTABLE +-6° MILLING CUTTER SPEEDS OF 400-4800 RPM. RADIAL & AXIAL FEED RATES OF 0-4 MM / SEC. TAILSTOCK SPINDLE STROKE 30 MM (60 MM) TAILSTOCK MOVED 61 MM WEIGHT 800 KG ACCESSORIES: COOLANT SYSTEM, VARIOUS RECORDINGS, FEEDER RAIL.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-type record, 30 pcs., size 1,  20  -  70 g\r\ninclude 3 new plastic moulding plates\r\n TYPE RECORD, 30 PCS., SIZE 1, 20 - 70 G\R\NINCLUDE 3 NEW PLASTIC MOULDING PLATES\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-year of construction: 2006
hours of operation machine: 25.436 h (06.03.2019)
pressing force approx.: 850 kn
bending length approx.: 2210 mm
control: tasc 6000
working height approx.: 1050 mm
free stand round about: 1750 mm
usable height approx.: 615 mm
space requirements: 2840 x 3100 x 1740 mm
approximate weight machine: 7,800 kg
total connected load approx.: 17 kva

hours of operation a machine: 25.436 h (06.03.2019)
a hydraulic: 17.535 h (06.03.2019)
run-time compression beams: 2593 h (06.03.2019)

standard equipment
-stable machine frame in all-steel construction
-pressure bar with high flexural strength
-electro-hydraulic top drive proportional valves - modern block hydraulic - cnc back gauge with gear rack / bevel drive, for x - and r axes, risk free move the stop fingers from the front - top tool clamping hydraulically
substation stuff for ev matrices, hydraulic clamping, programmable shift (2 positions) - safety device, roll protection covers rear - enclosure air conditioning control
-tasc 6000
-network capability

advanced machine equipment
-increase height/stroke
-additional stop fingers 2-axis
-crowning cnc
-safety device bendguard
-acb preparation
-edition console
-tasc 6000 characters module topscad

technical data subject to change - subject to prior sale
the operating hours for delivery of the machine may differ from the hours recorded in the offer YEAR OF CONSTRUCTION: 2006 HOURS OF OPERATION MACHINE: 25.436 H (06.03.2019) PRESSING FORCE APPROX.: 850 KN BENDING LENGTH APPROX.: 2210 MM CONTROL: TASC 6000 WORKING HEIGHT APPROX.: 1050 MM FREE STAND ROUND ABOUT: 1750 MM USABLE HEIGHT APPROX.: 615 MM SPACE REQUIREMENTS: 2840 X 3100 X 1740 MM APPROXIMATE WEIGHT MACHINE: 7,800 KG TOTAL CONNECTED LOAD APPROX.: 17 KVA HOURS OF OPERATION A MACHINE: 25.436 H (06.03.2019) A HYDRAULIC: 17.535 H (06.03.2019) RUN-TIME COMPRESSION BEAMS: 2593 H (06.03.2019) STANDARD EQUIPMENT -STABLE MACHINE FRAME IN ALL-STEEL CONSTRUCTION -PRESSURE BAR WITH HIGH FLEXURAL STRENGTH -ELECTRO-HYDRAULIC TOP DRIVE PROPORTIONAL VALVES - MODERN BLOCK HYDRAULIC - CNC BACK GAUGE WITH GEAR RACK / BEVEL DRIVE, FOR X - AND R AXES, RISK FREE MOVE THE STOP FINGERS FROM THE FRONT - TOP TOOL CLAMPING HYDRAULICALLY SUBSTATION STUFF FOR EV MATRICES, HYDRAULIC CLAMPING, PROGRAMMABLE SHIFT (2 POSITIONS) - SAFETY DEVICE, ROLL PROTECTION COVERS REAR - ENCLOSURE AIR CONDITIONING CONTROL -TASC 6000 -NETWORK CAPABILITY ADVANCED MACHINE EQUIPMENT -INCREASE HEIGHT/STROKE -ADDITIONAL STOP FINGERS 2-AXIS -CROWNING CNC -SAFETY DEVICE BENDGUARD -ACB PREPARATION -EDITION CONSOLE -TASC 6000 CHARACTERS MODULE TOPSCAD TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE THE OPERATING HOURS FOR DELIVERY OF THE MACHINE MAY DIFFER FROM THE HOURS RECORDED IN THE OFFER
Vendedor: mteg GmbH
Año de construcción: usado
Ubicación: Land-type record automat, 30 pcs.,  \r\nsize ii, doughweightrange 25  -  85 g\r\n TYPE RECORD AUTOMAT, 30 PCS., \R\NSIZE II, DOUGHWEIGHTRANGE 25 - 85 G\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-diesel generator power plant 106 mw with wartsila 7x18v46 hfo
 
this 106 mw power plant was delivered by wartsila in year 2000, operation started in 2001 and it has 7 x 18v46 diesel engines running on heavy fuel oil (hfo) at 500 rpm coupled with abb made brushless synchronous 11 kv / 50 hz alternators. i has been in operated under ppa and engines have been operated from 50700 to 69000 hours in base load power production this power plant is designed and build by wartsila utilizing their highly standardized functional module delivery. operation and maintenance works are carried out strictly in accordance with wartsila manuals, 60 000 hour maintenance is carried out to 3 units. no any unexpected breakdowns has happened. delivery contains complete functioning power plant with 110 kv switchyard, buildings and day tank yard. power plant is currently in standby mode, in excellent condition it has all service records and complete original documentation available at site.
 
main plant characteristics at current site conditions:
 
net power output at site: 106 mw at 110 kv / 50 hz
engines: 7 x 18v46 - 500 rpm
shaft output: iso 16 290 kwm
alternators: abb amg 1600 ss12 dseb self-cooled, brushless, synchronous
power factor: 0.8
efficiency: 0.97 (at rated output, 50 hz and power factor 0.8)
voltage: 11 000 v, with adjustment range +5 - 10%
frequency: 50 hz +/-5%
 
fuel consumption gross: 8290 - 8330 kj/kwh (43.4 to 43.2 % efficiency)
lube oil consumption: 0.7 g/kwh
cooling system: closed loop radiator cooling
fuel oil: hfo viscosity max 380 cst / 50 °c
internal electric consump: 2.5 % at full load, up to 4% at low load   DIESEL GENERATOR POWER PLANT 106 MW WITH WARTSILA 7X18V46 HFO THIS 106 MW POWER PLANT WAS DELIVERED BY WARTSILA IN YEAR 2000, OPERATION STARTED IN 2001 AND IT HAS 7 X 18V46 DIESEL ENGINES RUNNING ON HEAVY FUEL OIL (HFO) AT 500 RPM COUPLED WITH ABB MADE BRUSHLESS SYNCHRONOUS 11 KV / 50 HZ ALTERNATORS. I HAS BEEN IN OPERATED UNDER PPA AND ENGINES HAVE BEEN OPERATED FROM 50700 TO 69000 HOURS IN BASE LOAD POWER PRODUCTION THIS POWER PLANT IS DESIGNED AND BUILD BY WARTSILA UTILIZING THEIR HIGHLY STANDARDIZED FUNCTIONAL MODULE DELIVERY. OPERATION AND MAINTENANCE WORKS ARE CARRIED OUT STRICTLY IN ACCORDANCE WITH WARTSILA MANUALS, 60 000 HOUR MAINTENANCE IS CARRIED OUT TO 3 UNITS. NO ANY UNEXPECTED BREAKDOWNS HAS HAPPENED. DELIVERY CONTAINS COMPLETE FUNCTIONING POWER PLANT WITH 110 KV SWITCHYARD, BUILDINGS AND DAY TANK YARD. POWER PLANT IS CURRENTLY IN STANDBY MODE, IN EXCELLENT CONDITION IT HAS ALL SERVICE RECORDS AND COMPLETE ORIGINAL DOCUMENTATION AVAILABLE AT SITE. MAIN PLANT CHARACTERISTICS AT CURRENT SITE CONDITIONS: NET POWER OUTPUT AT SITE: 106 MW AT 110 KV / 50 HZ ENGINES: 7 X 18V46 - 500 RPM SHAFT OUTPUT: ISO 16 290 KWM ALTERNATORS: ABB AMG 1600 SS12 DSEB SELF-COOLED, BRUSHLESS, SYNCHRONOUS POWER FACTOR: 0.8 EFFICIENCY: 0.97 (AT RATED OUTPUT, 50 HZ AND POWER FACTOR 0.8) VOLTAGE: 11 000 V, WITH ADJUSTMENT RANGE +5 - 10% FREQUENCY: 50 HZ +/-5% FUEL CONSUMPTION GROSS: 8290 - 8330 KJ/KWH (43.4 TO 43.2 % EFFICIENCY) LUBE OIL CONSUMPTION: 0.7 G/KWH COOLING SYSTEM: CLOSED LOOP RADIATOR COOLING FUEL OIL: HFO VISCOSITY MAX 380 CST / 50 °C INTERNAL ELECTRIC CONSUMP: 2.5 % AT FULL LOAD, UP TO 4% AT LOW LOAD
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 2.900 €
Ubicación: Land-weight approx.: 7200 kg<br/>dimensions (l x w x h) approx.: 4800 x 2500 x 2600 mm<br/>description: cn machining center, axis x stroke: 3200, axis y stroke: 1400 mm, axis z stroke: 300 mm, empty pump capacity: 300 m3/h, toolholder: 10 positions, cnc type num 750, incl: tools WEIGHT APPROX.: 7200 KG
DIMENSIONS (L X W X H) APPROX.: 4800 X 2500 X 2600 MM
DESCRIPTION: CN MACHINING CENTER, AXIS X STROKE: 3200, AXIS Y STROKE: 1400 MM, AXIS Z STROKE: 300 MM, EMPTY PUMP CAPACITY: 300 M3/H, TOOLHOLDER: 10 POSITIONS, CNC TYPE NUM 750, INCL: TOOLS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 29.000 €
Ubicación: Land-cycle-controlled cnc lathe fabr. hamlet of type e 50/2
year of construction 1998

technical data:
cycle lathe; hamlet e50; year of construction 1998
control sinumerik 805t

swing over bed 570 mm, support 340 mm
top width 2000 mm
speed range (1/min) level 1: 1-625, level 2: 4-2500
spindle bore 66 mm
live recording mk 5
quick change toolpost (system ready)
coolant system
3 - jaw chuck d 315 mm
chip tray
chip protection hood
used, 17 000 hours with lots of accessories 


 CYCLE-CONTROLLED CNC LATHE FABR. HAMLET OF TYPE E 50/2 YEAR OF CONSTRUCTION 1998 TECHNICAL DATA: CYCLE LATHE; HAMLET E50; YEAR OF CONSTRUCTION 1998 CONTROL SINUMERIK 805T SWING OVER BED 570 MM, SUPPORT 340 MM TOP WIDTH 2000 MM SPEED RANGE (1/MIN) LEVEL 1: 1-625, LEVEL 2: 4-2500 SPINDLE BORE 66 MM LIVE RECORDING MK 5 QUICK CHANGE TOOLPOST (SYSTEM READY) COOLANT SYSTEM 3 - JAW CHUCK D 315 MM CHIP TRAY CHIP PROTECTION HOOD USED, 17 000 HOURS WITH LOTS OF ACCESSORIES
Vendedor: Khajavi-Tai Maschinenvermittlung
Año de construcción: usado
Ubicación: Land-measuring time: 1  min      <br />power consumption: 40 w<br />weight: 5  kg<br />operation / control:  easy 5-key-operation<br />equipment: automatic calibration, measurements: alcoholic contentl, extract, apparent extract, original wort, density, osmotic pressureinterfaces: parallel interface for a normal commercial printer, serial interface for connecting a pc<br />accessories: incl. recording printer (thermal printer, dpu-414)<br /> MEASURING TIME: 1 MIN
POWER CONSUMPTION: 40 W
WEIGHT: 5 KG
OPERATION / CONTROL: EASY 5-KEY-OPERATION
EQUIPMENT: AUTOMATIC CALIBRATION, MEASUREMENTS: ALCOHOLIC CONTENTL, EXTRACT, APPARENT EXTRACT, ORIGINAL WORT, DENSITY, OSMOTIC PRESSUREINTERFACES: PARALLEL INTERFACE FOR A NORMAL COMMERCIAL PRINTER, SERIAL INTERFACE FOR CONNECTING A PC
ACCESSORIES: INCL. RECORDING PRINTER (THERMAL PRINTER, DPU-414)
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-power plant 30 mw with man 3 x 12v48/60 hfo diesel generators
 
complete good condition power plant with three identical diesel generators with man b&w 12 cylinder 500 rpm hfo engines and siemens alternators each generating 10 mw / 11 kv / 50 hz. the equipment is manufactured in year 1996, engines has approx 65 000 operating hours and all equipment are very well maintained and in good condition. cooling of engines is arranged with a cooling tower. the plant has siemens made lv and hv (vacuum breakers) equipment, engine control is refurbished to siemens simatic et200 plc. with the delivery, there is plenty of original man spare parts. the complete plant is fully in operational condition and it has detailed service records and original manuals.
 
main technical data:
engine type: man b&w 12v48/60
engine rotating speed: 500 rpm
bore and stroke: 480 / 600 mm
total running hours: approx 65000/engine
fuel: hfo viscosity up to 700 cst at 50c
alternator type: siemens 1dk 11 kv/50hz, cos fee 0.8
fuel oil separators: 3 x westfalia osb 35 - 036 - 066
fuel oil booster unit 3 pcs
fuel oil transfer pumps 3 pcs
lubrication oil separators: 3 x westfalia osb 35 - 96 - 066
lubrication oil filters 3 x automatic and 3 x manual
lubrication oil tank 50 m3
ht and lt heat exchangers: 3 x alfa-laval
steam generators (lfo) 2 x 950 kg (year 2007)
black start unit: cummins 625 kva
lv cabinets siemens
11 kv hv breakers siemens vacuum cb
plant control system: man pc with process screens
dc system controls and batteries (year 2008)
station transformer: 22kv/400v
step up transformer: 11/22 kv
exhaust gas stack 3 x 65 meter with silencers   POWER PLANT 30 MW WITH MAN 3 X 12V48/60 HFO DIESEL GENERATORS COMPLETE GOOD CONDITION POWER PLANT WITH THREE IDENTICAL DIESEL GENERATORS WITH MAN B&W 12 CYLINDER 500 RPM HFO ENGINES AND SIEMENS ALTERNATORS EACH GENERATING 10 MW / 11 KV / 50 HZ. THE EQUIPMENT IS MANUFACTURED IN YEAR 1996, ENGINES HAS APPROX 65 000 OPERATING HOURS AND ALL EQUIPMENT ARE VERY WELL MAINTAINED AND IN GOOD CONDITION. COOLING OF ENGINES IS ARRANGED WITH A COOLING TOWER. THE PLANT HAS SIEMENS MADE LV AND HV (VACUUM BREAKERS) EQUIPMENT, ENGINE CONTROL IS REFURBISHED TO SIEMENS SIMATIC ET200 PLC. WITH THE DELIVERY, THERE IS PLENTY OF ORIGINAL MAN SPARE PARTS. THE COMPLETE PLANT IS FULLY IN OPERATIONAL CONDITION AND IT HAS DETAILED SERVICE RECORDS AND ORIGINAL MANUALS. MAIN TECHNICAL DATA: ENGINE TYPE: MAN B&W 12V48/60 ENGINE ROTATING SPEED: 500 RPM BORE AND STROKE: 480 / 600 MM TOTAL RUNNING HOURS: APPROX 65000/ENGINE FUEL: HFO VISCOSITY UP TO 700 CST AT 50C ALTERNATOR TYPE: SIEMENS 1DK 11 KV/50HZ, COS FEE 0.8 FUEL OIL SEPARATORS: 3 X WESTFALIA OSB 35 - 036 - 066 FUEL OIL BOOSTER UNIT 3 PCS FUEL OIL TRANSFER PUMPS 3 PCS LUBRICATION OIL SEPARATORS: 3 X WESTFALIA OSB 35 - 96 - 066 LUBRICATION OIL FILTERS 3 X AUTOMATIC AND 3 X MANUAL LUBRICATION OIL TANK 50 M3 HT AND LT HEAT EXCHANGERS: 3 X ALFA-LAVAL STEAM GENERATORS (LFO) 2 X 950 KG (YEAR 2007) BLACK START UNIT: CUMMINS 625 KVA LV CABINETS SIEMENS 11 KV HV BREAKERS SIEMENS VACUUM CB PLANT CONTROL SYSTEM: MAN PC WITH PROCESS SCREENS DC SYSTEM CONTROLS AND BATTERIES (YEAR 2008) STATION TRANSFORMER: 22KV/400V STEP UP TRANSFORMER: 11/22 KV EXHAUST GAS STACK 3 X 65 METER WITH SILENCERS
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 850 x 900 x 600 mm<br/>description: turning circle diameter 0 to 300 mm, tool length max. 330 mm, contactless measuring of the tool dimension, radius and height, projector for optical recording of measuring values, clamping mandrel approx. 40 mm, including blade adjustment station WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 850 X 900 X 600 MM
DESCRIPTION: TURNING CIRCLE DIAMETER 0 TO 300 MM, TOOL LENGTH MAX. 330 MM, CONTACTLESS MEASURING OF THE TOOL DIMENSION, RADIUS AND HEIGHT, PROJECTOR FOR OPTICAL RECORDING OF MEASURING VALUES, CLAMPING MANDREL APPROX. 40 MM, INCLUDING BLADE ADJUSTMENT STATION
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-traverse paths x - 1040 mm / y - 600 mm / z - 500 mm
table 1250 x 600 mm
speeds max. 8000 rpm installed make weis since 2017
changer 30 tools
recording sk 40 - internal coolant supply

4.achse full 4th axis lehmann 360.000 pos.

TRAVERSE PATHS X - 1040 MM / Y - 600 MM / Z - 500 MM TABLE 1250 X 600 MM SPEEDS MAX. 8000 RPM INSTALLED MAKE WEIS SINCE 2017 CHANGER 30 TOOLS RECORDING SK 40 - INTERNAL COOLANT SUPPLY 4.ACHSE FULL 4TH AXIS LEHMANN 360.000 POS.
Vendedor: Moser Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 40 kg<br/>dimensions (l x w x h) approx.: 500 x 500 x 1100 mm<br/>description: table diameter 500 mm, swivelling 0 to 45°, oscillation stroke 30 mm, 2 drum sanders 80 and 20 mm WEIGHT APPROX.: 40 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 500 X 1100 MM
DESCRIPTION: TABLE DIAMETER 500 MM, SWIVELLING 0 TO 45°, OSCILLATION STROKE 30 MM, 2 DRUM SANDERS 80 AND 20 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 55.000 €
Ubicación: Land-
machine type machining center - vertical make dmg mori type ecomill 600 v year 2016 control type cnc storage france origin - delivery time upon request of freight base from site technical details

x way 600 mm y way 560 mm z-way 510 mm control siemens 840 d sl 19zoll maximum speed 12,000 min / -1 power - spindle 13 / 9 kw maximum torque of 82 / 54 nm tool recording sk 40 distance spindle nose and table 120-630 mm table size 900 x 560 mm 
maximum table load 600 kg t-slots 5 working height 850 mm number of tool stations 30 pos. 
toolholder sk 40 max tool diameter 80 mm max werkzeugdurch. free neighboring box. 125 mm maximum tool length 300 mm of maximum tool weight 8.0 kg rapid traverse 30 m/min feed force 5 kn speed of max 30, 000 mm / min total power 32 kva machine weight approx. 5,0 t space requirement approx. 4,0 x 5,0 x 3,0 m accessories documentation cooling with tele n71 probe tool measuring electr. wheel washing equipment cnc - machining center vertical conveyors
 dmg mori - ecomill 600 v
 super condition only 1000 spindle hours MACHINE TYPE MACHINING CENTER - VERTICAL MAKE DMG MORI TYPE ECOMILL 600 V YEAR 2016 CONTROL TYPE CNC STORAGE FRANCE ORIGIN - DELIVERY TIME UPON REQUEST OF FREIGHT BASE FROM SITE TECHNICAL DETAILS X WAY 600 MM Y WAY 560 MM Z-WAY 510 MM CONTROL SIEMENS 840 D SL 19ZOLL MAXIMUM SPEED 12,000 MIN / -1 POWER - SPINDLE 13 / 9 KW MAXIMUM TORQUE OF 82 / 54 NM TOOL RECORDING SK 40 DISTANCE SPINDLE NOSE AND TABLE 120-630 MM TABLE SIZE 900 X 560 MM MAXIMUM TABLE LOAD 600 KG T-SLOTS 5 WORKING HEIGHT 850 MM NUMBER OF TOOL STATIONS 30 POS. TOOLHOLDER SK 40 MAX TOOL DIAMETER 80 MM MAX WERKZEUGDURCH. FREE NEIGHBORING BOX. 125 MM MAXIMUM TOOL LENGTH 300 MM OF MAXIMUM TOOL WEIGHT 8.0 KG RAPID TRAVERSE 30 M/MIN FEED FORCE 5 KN SPEED OF MAX 30, 000 MM / MIN TOTAL POWER 32 KVA MACHINE WEIGHT APPROX. 5,0 T SPACE REQUIREMENT APPROX. 4,0 X 5,0 X 3,0 M ACCESSORIES DOCUMENTATION COOLING WITH TELE N71 PROBE TOOL MEASURING ELECTR. WHEEL WASHING EQUIPMENT CNC - MACHINING CENTER VERTICAL CONVEYORS DMG MORI - ECOMILL 600 V SUPER CONDITION ONLY 1000 SPINDLE HOURS
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: used machinery auction RESALE 1.200 €
Ubicación: Land-serial number: aa 1/9598 <br/>weight approx.: 8000 kg<br/>dimensions (l x w x h) approx.: 5000 x 2600 x 3000 mm<br/>description: see photos SERIAL NUMBER: AA 1/9598
WEIGHT APPROX.: 8000 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 2600 X 3000 MM
DESCRIPTION: SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 12.990 €
Ubicación: Land-basic equipment:
base frame with perforated plate and 90 â° stop,
without pressing units and print elements

clamping size l x h in mm:
for gluing: 3900 x 1580
for frame (rack &amp; pinion gears): 3610 x 1580
for frame (hand hydraulic): 3550 x 1580
for body (rack &amp; pinion gears): 3610 x 1340
for body (hand hydraulic): 3550 x 1340
dimensions l x h x d: 4080 x 2250 x 800

including the following accessories:
4 x bm-60-03 press unit
2 x bm-70-12 holders plus
1 x bm-70-20 page print setup rpg l 20
1 x bm-40-55 chassis
1 x bm-35-57 miter shipping glue device
2 x bm-70-33 rack &amp; pinion gears for perforated plate
2 x bm-70-05 rack &amp; pinion gears with belt recording
1 x bm-70-05-0300 belt with tensioner
4 x bm-70-34 abutment 360 â°
4 x bm-70-35 abutment 90â° BASIC EQUIPMENT: BASE FRAME WITH PERFORATED PLATE AND 90 &ACIRC;&DEG; STOP, WITHOUT PRESSING UNITS AND PRINT ELEMENTS CLAMPING SIZE L X H IN MM: FOR GLUING: 3900 X 1580 FOR FRAME (RACK &AMP; PINION GEARS): 3610 X 1580 FOR FRAME (HAND HYDRAULIC): 3550 X 1580 FOR BODY (RACK &AMP; PINION GEARS): 3610 X 1340 FOR BODY (HAND HYDRAULIC): 3550 X 1340 DIMENSIONS L X H X D: 4080 X 2250 X 800 INCLUDING THE FOLLOWING ACCESSORIES: 4 X BM-60-03 PRESS UNIT 2 X BM-70-12 HOLDERS PLUS 1 X BM-70-20 PAGE PRINT SETUP RPG L 20 1 X BM-40-55 CHASSIS 1 X BM-35-57 MITER SHIPPING GLUE DEVICE 2 X BM-70-33 RACK &AMP; PINION GEARS FOR PERFORATED PLATE 2 X BM-70-05 RACK &AMP; PINION GEARS WITH BELT RECORDING 1 X BM-70-05-0300 BELT WITH TENSIONER 4 X BM-70-34 ABUTMENT 360 &ACIRC;&DEG; 4 X BM-70-35 ABUTMENT 90&ACIRC;&DEG;
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-weight approx.: 50 kg<br/>dimensions (l x w x h) approx.: 500 x 500 x 500 mm<br/>description: fischer xm 1000/cml coating thickness gauge. electrical connection 220 volt. the fischerscope x-ray 1000/cml is a non-destructive coating thickness gauge that uses the x-ray fluorescence method according to iso 3497, astm b568 and din 50987. suitable for measuring virtually any single layer / base material combination, multilayers, alloy layers, as well as recording a spectrum of material identification. WEIGHT APPROX.: 50 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 500 X 500 MM
DESCRIPTION: FISCHER XM 1000/CML COATING THICKNESS GAUGE. ELECTRICAL CONNECTION 220 VOLT. THE FISCHERSCOPE X-RAY 1000/CML IS A NON-DESTRUCTIVE COATING THICKNESS GAUGE THAT USES THE X-RAY FLUORESCENCE METHOD ACCORDING TO ISO 3497, ASTM B568 AND DIN 50987. SUITABLE FOR MEASURING VIRTUALLY ANY SINGLE LAYER / BASE MATERIAL COMBINATION, MULTILAYERS, ALLOY LAYERS, AS WELL AS RECORDING A SPECTRUM OF MATERIAL IDENTIFICATION.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 15.500 €
Ubicación: Land-m
machine type cnc lathe - inclined bed machine make zps type s 50 cnc year 2000 3 axis control type cnc storage france origin cz delivery after agreement cargo base stock haguenau technical details

turning diameter 430 mm turning length 535 mm cnc fanuc 21 it rod forward: 63 mm speed range - spindle 5000 u/min feed range - revolver / continuously 20 mm / min rapid traverse 30 m / min number of turret: 1 piece turret - places: 12 stations work stuff recording vdi 40 tailstock yes total power 30 kw machine weight 7 tons of space approximately 2900 x 1800 x 1800 mm 3 - bake - feed yes complete machine documentation electronic hand wheel coolant system yes yes yes immediately free good strong machine
 3 axis machines
 with tailstock good condition cnc fanuc 21 it 2 getriebestuffen
 spaenefoerderer
 3 jaw chuck dia 250 mm
 kurtz loaders iemca top 80 M MACHINE TYPE CNC LATHE - INCLINED BED MACHINE MAKE ZPS TYPE S 50 CNC YEAR 2000 3 AXIS CONTROL TYPE CNC STORAGE FRANCE ORIGIN CZ DELIVERY AFTER AGREEMENT CARGO BASE STOCK HAGUENAU TECHNICAL DETAILS TURNING DIAMETER 430 MM TURNING LENGTH 535 MM CNC FANUC 21 IT ROD FORWARD: 63 MM SPEED RANGE - SPINDLE 5000 U/MIN FEED RANGE - REVOLVER / CONTINUOUSLY 20 MM / MIN RAPID TRAVERSE 30 M / MIN NUMBER OF TURRET: 1 PIECE TURRET - PLACES: 12 STATIONS WORK STUFF RECORDING VDI 40 TAILSTOCK YES TOTAL POWER 30 KW MACHINE WEIGHT 7 TONS OF SPACE APPROXIMATELY 2900 X 1800 X 1800 MM 3 - BAKE - FEED YES COMPLETE MACHINE DOCUMENTATION ELECTRONIC HAND WHEEL COOLANT SYSTEM YES YES YES IMMEDIATELY FREE GOOD STRONG MACHINE 3 AXIS MACHINES WITH TAILSTOCK GOOD CONDITION CNC FANUC 21 IT 2 GETRIEBESTUFFEN SPAENEFOERDERER 3 JAW CHUCK DIA 250 MM KURTZ LOADERS IEMCA TOP 80
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: used machinery auction RESALE 950 €
Ubicación: Land-weight approx.: 7200 kg<br/>dimensions (l x w x h) approx.: 6000 x 2900 x 2850 mm<br/>description: cnc machining centre<br> serial number aa1/8835<br> aluminium worktable with dimensions approx. 3200 x 1050 mm<br> travelling way x-axis: 3200 mm, travelling way y-axis: 1400 mm, travelling way z-axis: 300 mm<br> maximum travel speed in the axes direction x-y-z: 45-45-25 m/min<br> tool changer with 10 positions<br> main spindle power 7.50 kw-max. 18000 rpm with connection iso 30<br> numerical control num 750<br> 2 x vacuum pump becker kvt 2.100 with capacity 100 m3/h<br> the tools that appears in the photos are included WEIGHT APPROX.: 7200 KG
DIMENSIONS (L X W X H) APPROX.: 6000 X 2900 X 2850 MM
DESCRIPTION: CNC MACHINING CENTRE
SERIAL NUMBER AA1/8835
ALUMINIUM WORKTABLE WITH DIMENSIONS APPROX. 3200 X 1050 MM
TRAVELLING WAY X-AXIS: 3200 MM, TRAVELLING WAY Y-AXIS: 1400 MM, TRAVELLING WAY Z-AXIS: 300 MM
MAXIMUM TRAVEL SPEED IN THE AXES DIRECTION X-Y-Z: 45-45-25 M/MIN
TOOL CHANGER WITH 10 POSITIONS
MAIN SPINDLE POWER 7.50 KW-MAX. 18000 RPM WITH CONNECTION ISO 30
NUMERICAL CONTROL NUM 750
2 X VACUUM PUMP BECKER KVT 2.100 WITH CAPACITY 100 M3/H
THE TOOLS THAT APPEARS IN THE PHOTOS ARE INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-press container meulenbroek kpc 10
built in 2006
contents: 10 m3
pressing force: 34 ton
entladetur: topscharnierend
recording: portal PRESS CONTAINER MEULENBROEK KPC 10 BUILT IN 2006 CONTENTS: 10 M3 PRESSING FORCE: 34 TON ENTLADETUR: TOPSCHARNIEREND RECORDING: PORTAL
Vendedor: OMC Machineonderhoud
Año de construcción: usado
Ubicación: Land-sheet width: 3050 mm<br/>plate thickness: 4 mm<br/>distance between columns: 3080 mm<br/>control: siemens s7 <br/>bending angle max.: 130 °<br/>upper clamping stroke: 300 mm<br/>total power requirement: 7,5 kw<br/>weight of the machine ca.: 6,2 t<br/>dimensions of the machine ca.:  m<br/>ce signed:  <br/>electric 400 volt:  <br/>cnc-back gauge: 1000 mm<br/>crowning system:  <br/>cnc control with touchscreen:  <br/>automatic tool clamping: oben <br/>foot switch:  <br/>upper tool: 45 °<br/>the modern full hydraulic bending machine is the ideal solution for reliable, <br/>fast and precise bending. extremely versatile, flexible and easy to use.<br/>-    hydraulically driven upper and bending beam<br/>-    pointed upper beam rail 45 degrees<br/>-    rails of upper, lower and bending beam interchangeable<br/>-    operating panel with:<br/>     ?    indication of bending angle<br/>     ?    pre selection of bending angle<br/>     ?    tipp switch to operate upper and bending beam » automatic mode<br/>-    control system: plc - siemens - s7<br/>-    foot switch for manual and automatic operation ce ?certificate<br/>-    safety stop at approx. 25 mm upper beam height<br/>-    dynamic hydraulic camber - patented (with this dynamic hydraulic camber <br/>system it is possible to achieve a very good bending result over the full <br/>length. conventional systems are only able to bend specific sheets at specific <br/>angles with a specific mechanical camber. this new dynamic hydraulic camber <br/>allows you to bend any angle ?<br/>-    motor-controlled back gauge (1000 mm) with electronic position indicator <br/>of the back gauge. an easily manageable control panel allows to setting the <br/>desired back gauge value precisely. the back gauge adjusts accordingly. if you <br/>want to make many different bending and save time by eliminating manual <br/>measuring, we recommend this option.<br/>-    touchscreen: selection of back gauge values and bending angle with a <br/>microprocessor for the selection and storing of de up to 8 positions of the <br/>back gauge and up to 8 angles per bending part. it is possible to store up to <br/>999 bending parts (= 8 values for back gauge position and 8 values for bending <br/>angles) and recall of values via quick selection. the bending machine then <br/>operates the working steps automatically for each selected profile.<br/>-    automatic tool clamping: 7 simplify the changing of upper beam tools. with <br/>automatic clamping you loosen and fasten all your upper beam tools on the push <br/>of a button. you will change your tools at record speed.<br/><br/>unused hydraulic folding machine with special price.<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> SHEET WIDTH: 3050 MM
PLATE THICKNESS: 4 MM
DISTANCE BETWEEN COLUMNS: 3080 MM
CONTROL: SIEMENS S7
BENDING ANGLE MAX.: 130 °
UPPER CLAMPING STROKE: 300 MM
TOTAL POWER REQUIREMENT: 7,5 KW
WEIGHT OF THE MACHINE CA.: 6,2 T
DIMENSIONS OF THE MACHINE CA.: M
CE SIGNED:
ELECTRIC 400 VOLT:
CNC-BACK GAUGE: 1000 MM
CROWNING SYSTEM:
CNC CONTROL WITH TOUCHSCREEN:
AUTOMATIC TOOL CLAMPING: OBEN
FOOT SWITCH:
UPPER TOOL: 45 °
THE MODERN FULL HYDRAULIC BENDING MACHINE IS THE IDEAL SOLUTION FOR RELIABLE,
FAST AND PRECISE BENDING. EXTREMELY VERSATILE, FLEXIBLE AND EASY TO USE.
- HYDRAULICALLY DRIVEN UPPER AND BENDING BEAM
- POINTED UPPER BEAM RAIL 45 DEGREES
- RAILS OF UPPER, LOWER AND BENDING BEAM INTERCHANGEABLE
- OPERATING PANEL WITH:
? INDICATION OF BENDING ANGLE
? PRE SELECTION OF BENDING ANGLE
? TIPP SWITCH TO OPERATE UPPER AND BENDING BEAM » AUTOMATIC MODE
- CONTROL SYSTEM: PLC - SIEMENS - S7
- FOOT SWITCH FOR MANUAL AND AUTOMATIC OPERATION CE ?CERTIFICATE
- SAFETY STOP AT APPROX. 25 MM UPPER BEAM HEIGHT
- DYNAMIC HYDRAULIC CAMBER - PATENTED (WITH THIS DYNAMIC HYDRAULIC CAMBER
SYSTEM IT IS POSSIBLE TO ACHIEVE A VERY GOOD BENDING RESULT OVER THE FULL
LENGTH. CONVENTIONAL SYSTEMS ARE ONLY ABLE TO BEND SPECIFIC SHEETS AT SPECIFIC
ANGLES WITH A SPECIFIC MECHANICAL CAMBER. THIS NEW DYNAMIC HYDRAULIC CAMBER
ALLOWS YOU TO BEND ANY ANGLE ?
- MOTOR-CONTROLLED BACK GAUGE (1000 MM) WITH ELECTRONIC POSITION INDICATOR
OF THE BACK GAUGE. AN EASILY MANAGEABLE CONTROL PANEL ALLOWS TO SETTING THE
DESIRED BACK GAUGE VALUE PRECISELY. THE BACK GAUGE ADJUSTS ACCORDINGLY. IF YOU
WANT TO MAKE MANY DIFFERENT BENDING AND SAVE TIME BY ELIMINATING MANUAL
MEASURING, WE RECOMMEND THIS OPTION.
- TOUCHSCREEN: SELECTION OF BACK GAUGE VALUES AND BENDING ANGLE WITH A
MICROPROCESSOR FOR THE SELECTION AND STORING OF DE UP TO 8 POSITIONS OF THE
BACK GAUGE AND UP TO 8 ANGLES PER BENDING PART. IT IS POSSIBLE TO STORE UP TO
999 BENDING PARTS (= 8 VALUES FOR BACK GAUGE POSITION AND 8 VALUES FOR BENDING
ANGLES) AND RECALL OF VALUES VIA QUICK SELECTION. THE BENDING MACHINE THEN
OPERATES THE WORKING STEPS AUTOMATICALLY FOR EACH SELECTED PROFILE.
- AUTOMATIC TOOL CLAMPING: 7 SIMPLIFY THE CHANGING OF UPPER BEAM TOOLS. WITH
AUTOMATIC CLAMPING YOU LOOSEN AND FASTEN ALL YOUR UPPER BEAM TOOLS ON THE PUSH
OF A BUTTON. YOU WILL CHANGE YOUR TOOLS AT RECORD SPEED.

UNUSED HYDRAULIC FOLDING MACHINE WITH SPECIAL PRICE.
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land--digital display, 2-axis
-wedge bars - three jaw chuck rhu 㸠315 mm
-steel holder êºmultifixêº with 3 sockets type c
-fixed bezel
-revolving bezel
-coolant system
-live
-lamp
-splash guard plate
-feed splash guard
tip height 260 mm
top width 1500 mm
spindle passage 㸠52 mm
spindle speeds 45-2240 rev/min.
recording camlock 6 "
machine dimensions: l / b / h 3000 x 1100 x 1500 mm
weight 2500 kg
 -DIGITAL DISPLAY, 2-AXIS -WEDGE BARS - THREE JAW CHUCK RHU &ATILDE;&CEDIL; 315 MM -STEEL HOLDER &ECIRC;&ORDM;MULTIFIX&ECIRC;&ORDM; WITH 3 SOCKETS TYPE C -FIXED BEZEL -REVOLVING BEZEL -COOLANT SYSTEM -LIVE -LAMP -SPLASH GUARD PLATE -FEED SPLASH GUARD TIP HEIGHT 260 MM TOP WIDTH 1500 MM SPINDLE PASSAGE &ATILDE;&CEDIL; 52 MM SPINDLE SPEEDS 45-2240 REV/MIN. RECORDING CAMLOCK 6 " MACHINE DIMENSIONS: L / B / H 3000 X 1100 X 1500 MM WEIGHT 2500 KG
Vendedor: Catalano Werkzeugmaschinen AG
Año de construcción: usado
Precio: 16.500 €
Ubicación: Land-cnc plate boring machine, table boring machine, boring mill, milling machine,<br /><br />-geometrically overhauled 2008<br />-control siemens sinumerik 840d<br />-rotatable clamping table 360 °<br />-travel distance 1800 mm<br />-table dimensions 1,400 x 1,300 mm<br />-table load approx. 5,000 kg<br />-solid worktable<br />-table dimensions 3,120 x 1,300 mm<br />-table load approx. kg<br />-winkelfräskopf<br />-driving lanes<br />z 810 mm<br />y 1500 mm<br />x 6000 mm<br />-working spindle 120 mm<br />-pinolenhub 800 mm<br />-recording sk50<br />-revolutions rpm<br />-dimensions machine mm<br />-dimensions control cabinet mm<br />-weight kg CNC PLATE BORING MACHINE, TABLE BORING MACHINE, BORING MILL, MILLING MACHINE,

-GEOMETRICALLY OVERHAULED 2008
-CONTROL SIEMENS SINUMERIK 840D
-ROTATABLE CLAMPING TABLE 360 °
-TRAVEL DISTANCE 1800 MM
-TABLE DIMENSIONS 1,400 X 1,300 MM
-TABLE LOAD APPROX. 5,000 KG
-SOLID WORKTABLE
-TABLE DIMENSIONS 3,120 X 1,300 MM
-TABLE LOAD APPROX. KG
-WINKELFRäSKOPF
-DRIVING LANES
Z 810 MM
Y 1500 MM
X 6000 MM
-WORKING SPINDLE 120 MM
-PINOLENHUB 800 MM
-RECORDING SK50
-REVOLUTIONS RPM
-DIMENSIONS MACHINE MM
-DIMENSIONS CONTROL CABINET MM
-WEIGHT KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-press container meulenbroek kpc 10
built in 2005
contents: 10 m3
pressing force: 34 ton
entladetur: topscharnierend
recording: hook and steel PRESS CONTAINER MEULENBROEK KPC 10 BUILT IN 2005 CONTENTS: 10 M3 PRESSING FORCE: 34 TON ENTLADETUR: TOPSCHARNIEREND RECORDING: HOOK AND STEEL
Vendedor: OMC Machineonderhoud
Año de construcción: usado
Precio: used machinery auction RESALE 550 €
Ubicación: Land-weight approx.: 600 kg<br/>dimensions (l x w x h) approx.: 950 x 650 x 2400 mm<br/>description: drill press recording mk 4 drilling capacity 40mm speed 70 - 1450 projection 390mm drilling stroke 150mm WEIGHT APPROX.: 600 KG
DIMENSIONS (L X W X H) APPROX.: 950 X 650 X 2400 MM
DESCRIPTION: DRILL PRESS RECORDING MK 4 DRILLING CAPACITY 40MM SPEED 70 - 1450 PROJECTION 390MM DRILLING STROKE 150MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-vertical broaching machine with rotary table for multiple slots (2, 3, 4, etc.)
train performance 0-6 mp / 6t
gr. stroke 950 mm
gr. keyway width 40 mm
table size 600 x 600 mm
table forward 180 mm
cutting speed 3 m / min.
reverse speed 3 m / min.
4.5 kw
weight 1000 kg
accessories: div. recordings and broaches. VERTICAL BROACHING MACHINE WITH ROTARY TABLE FOR MULTIPLE SLOTS (2, 3, 4, ETC.) TRAIN PERFORMANCE 0-6 MP / 6T GR. STROKE 950 MM GR. KEYWAY WIDTH 40 MM TABLE SIZE 600 X 600 MM TABLE FORWARD 180 MM CUTTING SPEED 3 M / MIN. REVERSE SPEED 3 M / MIN. 4.5 KW WEIGHT 1000 KG ACCESSORIES: DIV. RECORDINGS AND BROACHES.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 350 kg<br/>dimensions (l x w x h) approx.: 950 x 500 x 2000 mm<br/>description: drill press recording mk 3 drilling capacity 23mm speed 150 - 1135 projection 295mm drilling stroke 150mm WEIGHT APPROX.: 350 KG
DIMENSIONS (L X W X H) APPROX.: 950 X 500 X 2000 MM
DESCRIPTION: DRILL PRESS RECORDING MK 3 DRILLING CAPACITY 23MM SPEED 150 - 1135 PROJECTION 295MM DRILLING STROKE 150MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-year of constr.: 2015
hours of operation machine: 8.429 h (06.03.2019)
pressing force approx.: 360 kn
bending length approx.: 1020 mm
control: tasc 6000
working height approx.: 1150 mm
free stand round about: 932 mm
usable height approx.: 300 mm
space requirements: 1805 x 1330 x 2380 mm
approximate weight machine: 2,600 kg
total connected load approx.: 6 kva

standard equipment

bejyws0sqk
a time program: 6.510 h
press bar runtime: 1: 058 h
cycles press bar: 2.185.654 pcs.

machine
-stable machine frame for standing and seated operation
-deformation enhanced press bar
-highly dynamic, electro. direct drive (torque motor)
-inductive length measuring system with temperature compensation
-enclosure air conditioning
-ergonomic machine design

control
-trump integrated tasc 6000
-numeric workshop programming
-windows xpe, pentium m 1.1 ghz clock frequency
-1 gb ram memory
-15-inch touch screen
-network capable

security
-side hinged doors
-rear protection cover
-2-button foot switch, for standing and seated operation
-ce marking

advanced facilities
-trailing stop system 6 axes

ergonomics package
-comfort plate (front)
-comfort footrest
-2 shelf brackets
-2 document shelves
-lighting of workroom front (led)
-control unit swivel
-sitting and standing support

productivity plus package
-bendguard (with block-laser)
-graphic workshop programming
-automatic tool clamping

technical data subject to change - subject to prior sale
the operating hours for delivery of the machine may differ from the hours recorded in the offer YEAR OF CONSTR.: 2015 HOURS OF OPERATION MACHINE: 8.429 H (06.03.2019) PRESSING FORCE APPROX.: 360 KN BENDING LENGTH APPROX.: 1020 MM CONTROL: TASC 6000 WORKING HEIGHT APPROX.: 1150 MM FREE STAND ROUND ABOUT: 932 MM USABLE HEIGHT APPROX.: 300 MM SPACE REQUIREMENTS: 1805 X 1330 X 2380 MM APPROXIMATE WEIGHT MACHINE: 2,600 KG TOTAL CONNECTED LOAD APPROX.: 6 KVA STANDARD EQUIPMENT BEJYWS0SQK A TIME PROGRAM: 6.510 H PRESS BAR RUNTIME: 1: 058 H CYCLES PRESS BAR: 2.185.654 PCS. MACHINE -STABLE MACHINE FRAME FOR STANDING AND SEATED OPERATION -DEFORMATION ENHANCED PRESS BAR -HIGHLY DYNAMIC, ELECTRO. DIRECT DRIVE (TORQUE MOTOR) -INDUCTIVE LENGTH MEASURING SYSTEM WITH TEMPERATURE COMPENSATION -ENCLOSURE AIR CONDITIONING -ERGONOMIC MACHINE DESIGN CONTROL -TRUMP INTEGRATED TASC 6000 -NUMERIC WORKSHOP PROGRAMMING -WINDOWS XPE, PENTIUM M 1.1 GHZ CLOCK FREQUENCY -1 GB RAM MEMORY -15-INCH TOUCH SCREEN -NETWORK CAPABLE SECURITY -SIDE HINGED DOORS -REAR PROTECTION COVER -2-BUTTON FOOT SWITCH, FOR STANDING AND SEATED OPERATION -CE MARKING ADVANCED FACILITIES -TRAILING STOP SYSTEM 6 AXES ERGONOMICS PACKAGE -COMFORT PLATE (FRONT) -COMFORT FOOTREST -2 SHELF BRACKETS -2 DOCUMENT SHELVES -LIGHTING OF WORKROOM FRONT (LED) -CONTROL UNIT SWIVEL -SITTING AND STANDING SUPPORT PRODUCTIVITY PLUS PACKAGE -BENDGUARD (WITH BLOCK-LASER) -GRAPHIC WORKSHOP PROGRAMMING -AUTOMATIC TOOL CLAMPING TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE THE OPERATING HOURS FOR DELIVERY OF THE MACHINE MAY DIFFER FROM THE HOURS RECORDED IN THE OFFER
Vendedor: mteg GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 2.600 €
Ubicación: Land-weight approx.: 400 kg<br/>dimensions (l x w x h) approx.: 1100 x 800 x 1500 mm<br/>description: profile bending machine with: - foot pedal for right / left rotation - recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - lower rollers are driven - upper roll up and down hydraulically deliverable - horizontal and vertical operation - engine with braking device g round material solid 35 mm square material massive 35 mm angle steel 50 x 50 x 5 mm t - steel bridge to the outside 50 x 6 mm axis diameter 50 mm total power requirement 1.5 kw machine weight approx. 0.4 t space required approx. 1.1 x 0.8 x 1.5 m WEIGHT APPROX.: 400 KG
DIMENSIONS (L X W X H) APPROX.: 1100 X 800 X 1500 MM
DESCRIPTION: PROFILE BENDING MACHINE WITH: - FOOT PEDAL FOR RIGHT / LEFT ROTATION - RECORDING: WAVE 50MM - WITH DIGITAL DISPLAY - HARDENED SPECIAL STEEL SHAFTS - 1 SET OF STANDARD ROLLERS - LOWER ROLLERS ARE DRIVEN - UPPER ROLL UP AND DOWN HYDRAULICALLY DELIVERABLE - HORIZONTAL AND VERTICAL OPERATION - ENGINE WITH BRAKING DEVICE G ROUND MATERIAL SOLID 35 MM SQUARE MATERIAL MASSIVE 35 MM ANGLE STEEL 50 X 50 X 5 MM T - STEEL BRIDGE TO THE OUTSIDE 50 X 6 MM AXIS DIAMETER 50 MM TOTAL POWER REQUIREMENT 1.5 KW MACHINE WEIGHT APPROX. 0.4 T SPACE REQUIRED APPROX. 1.1 X 0.8 X 1.5 M
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-continuous drilling capacity in st 60 50 mm
drilling capacity 60 mm
thread capacity in st 60 m 50 mm
column diameter 200 mm
table incl. edge 700 x 590 mm

motor polarity switchable 2.5 / 3.5 kw
recording mk 4 radius 360 mm
spindle stroke 225 mm

4 speed series, continuously variable 30-1400 rpm (pol-switchable and transmission)
4 automatic feeds approx.		0.1 - 0.4 mm / rev

w x d x h approx.					0.7 x 1.2 x 2,15 m
weight approx.					0.8 to

equipment / scope of supply:-stepless speed adjustment, with transmission from 30 rpm
-table column can be rotated
-worked base plate with t-slots for editing high parts
-integrated machine light
-mk 4 - recording
-coolant system - engine stage 1 counterclockwise rotation
-feed device, 4 feeds
-thread cutting device CONTINUOUS DRILLING CAPACITY IN ST 60 50 MM DRILLING CAPACITY 60 MM THREAD CAPACITY IN ST 60 M 50 MM COLUMN DIAMETER 200 MM TABLE INCL. EDGE 700 X 590 MM MOTOR POLARITY SWITCHABLE 2.5 / 3.5 KW RECORDING MK 4 RADIUS 360 MM SPINDLE STROKE 225 MM 4 SPEED SERIES, CONTINUOUSLY VARIABLE 30-1400 RPM (POL-SWITCHABLE AND TRANSMISSION) 4 AUTOMATIC FEEDS APPROX. 0.1 - 0.4 MM / REV W X D X H APPROX. 0.7 X 1.2 X 2,15 M WEIGHT APPROX. 0.8 TO EQUIPMENT / SCOPE OF SUPPLY:-STEPLESS SPEED ADJUSTMENT, WITH TRANSMISSION FROM 30 RPM -TABLE COLUMN CAN BE ROTATED -WORKED BASE PLATE WITH T-SLOTS FOR EDITING HIGH PARTS -INTEGRATED MACHINE LIGHT -MK 4 - RECORDING -COOLANT SYSTEM - ENGINE STAGE 1 COUNTERCLOCKWISE ROTATION -FEED DEVICE, 4 FEEDS -THREAD CUTTING DEVICE
Vendedor: Schrenk Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 5.200 €
Ubicación: Land-weight approx.: 1020 kg<br/>dimensions (l x w x h) approx.: 1200 x 900 x 1200 mm<br/>description: profile bending machine with: - foot pedal right / left - recording: shaft 60mm - with 2-fold digital display - 3 rollers driven - lower rollers individually hydraulically deliverable - hardened special steel shafts - 1 set of standard rollers round material solid 50 (500) mm square material solid 45 (500) mm angle steel 80 x 80 x 8 (800) mm t - steel bridge to the outside 80 x 9 (800) mm axis diameter 60 mm working speed 5.0 m / min tool diameter 195 mm total power requirement 3 kw machine weight approx. 1.0 t space required approx. 1.2 x 0.9 x 1.2 m WEIGHT APPROX.: 1020 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 900 X 1200 MM
DESCRIPTION: PROFILE BENDING MACHINE WITH: - FOOT PEDAL RIGHT / LEFT - RECORDING: SHAFT 60MM - WITH 2-FOLD DIGITAL DISPLAY - 3 ROLLERS DRIVEN - LOWER ROLLERS INDIVIDUALLY HYDRAULICALLY DELIVERABLE - HARDENED SPECIAL STEEL SHAFTS - 1 SET OF STANDARD ROLLERS ROUND MATERIAL SOLID 50 (500) MM SQUARE MATERIAL SOLID 45 (500) MM ANGLE STEEL 80 X 80 X 8 (800) MM T - STEEL BRIDGE TO THE OUTSIDE 80 X 9 (800) MM AXIS DIAMETER 60 MM WORKING SPEED 5.0 M / MIN TOOL DIAMETER 195 MM TOTAL POWER REQUIREMENT 3 KW MACHINE WEIGHT APPROX. 1.0 T SPACE REQUIRED APPROX. 1.2 X 0.9 X 1.2 M
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-facilities:
-console machine with cantilever
-pneum.. workpiece stops with double-acting cylinders
-pneum.. assembly aids
-additional editing fields front (4-field machining)
-handheld
-c axis
-swivel sawing unit to the grooves in the x - and y-direction
-horizontal milling unit for lock box
-plate tool changer driving with - laser positioning aid for the cleaner
-autom. central lubrication system

technical data:
-traverse path max x: 3.259 mm
-traverse path max y: 1,483 mm
-maximum z: travel 325 mm
-speed max x: 75 m / min
-speed max y: 75 m / min
-maximum z: speed 30 m / min
-workpiece thickness max: 100 mm
-spindle motor power: 7,5 kw
-main spindle speed: 1000-18000 rpm
-recording of main spindle: hsk 63f
-recording spindles: m10 with 11 mm fit
-number of vertical spindles: 14 pieces
-number of horizontal twin spindles
in the x direction: 1 piece
in the y-direction: 1 piece
-7 consoles
-places in the changer: 12 pieces
-suction nozzle 㸠250 mm
-compressed air connection 3/8
-dimensions: 6.180 x 2.800 x 2,550 mm
 FACILITIES: -CONSOLE MACHINE WITH CANTILEVER -PNEUM.. WORKPIECE STOPS WITH DOUBLE-ACTING CYLINDERS -PNEUM.. ASSEMBLY AIDS -ADDITIONAL EDITING FIELDS FRONT (4-FIELD MACHINING) -HANDHELD -C AXIS -SWIVEL SAWING UNIT TO THE GROOVES IN THE X - AND Y-DIRECTION -HORIZONTAL MILLING UNIT FOR LOCK BOX -PLATE TOOL CHANGER DRIVING WITH - LASER POSITIONING AID FOR THE CLEANER -AUTOM. CENTRAL LUBRICATION SYSTEM TECHNICAL DATA: -TRAVERSE PATH MAX X: 3.259 MM -TRAVERSE PATH MAX Y: 1,483 MM -MAXIMUM Z: TRAVEL 325 MM -SPEED MAX X: 75 M / MIN -SPEED MAX Y: 75 M / MIN -MAXIMUM Z: SPEED 30 M / MIN -WORKPIECE THICKNESS MAX: 100 MM -SPINDLE MOTOR POWER: 7,5 KW -MAIN SPINDLE SPEED: 1000-18000 RPM -RECORDING OF MAIN SPINDLE: HSK 63F -RECORDING SPINDLES: M10 WITH 11 MM FIT -NUMBER OF VERTICAL SPINDLES: 14 PIECES -NUMBER OF HORIZONTAL TWIN SPINDLES IN THE X DIRECTION: 1 PIECE IN THE Y-DIRECTION: 1 PIECE -7 CONSOLES -PLACES IN THE CHANGER: 12 PIECES -SUCTION NOZZLE &ATILDE;&CEDIL; 250 MM -COMPRESSED AIR CONNECTION 3/8 -DIMENSIONS: 6.180 X 2.800 X 2,550 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 2.400 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 600 x 1250 x 1100 mm<br/>description: exhibition machine !!! the big workshop saw with the sophisticated technology. (20070) ? for miter cuts right and left up to 45 °, end stop at 90 ° and at  45 ° left ? for sawing steel, stainless steel and due to aluminum profiles ? vice with quick release lever, longitudinally movable clamping jaw,  adjustable guide and double clamping arm for low-profile cuts ? tapered safety coupling made of hardened steel to protect the saw blades. ? large base plate made of solid cast iron for maximum stability and  low-vibration sawing ? 2 speeds 30 + 60 min-1 ? powerful special gearbox with elastic coupling for heavy duty use ? automatic cooling directly on the saw blade ? double saw head mounted ? safety switch 24 v in the handle with restart interlock ? length stop, assembly tool ? machine base (option) extra price 499, -eur saw blade diameter 315/350 mm cutting area at 90 degrees: around 125 mm cutting area at 90 degrees: square 110 mm cutting area at 90 degrees: flat 160x90 mm cutting area at 45 degrees: around 105 mm cutting area at 45 degrees: square 90 mm cutting area at 60 degrees: flat 80x100 mm total power required 1.8 / 2.5 kw machine weight approx. 0.2 t space required approx. 0.6 x 1.22 x 1.06 m WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 1250 X 1100 MM
DESCRIPTION: EXHIBITION MACHINE !!! THE BIG WORKSHOP SAW WITH THE SOPHISTICATED TECHNOLOGY. (20070) ? FOR MITER CUTS RIGHT AND LEFT UP TO 45 °, END STOP AT 90 ° AND AT 45 ° LEFT ? FOR SAWING STEEL, STAINLESS STEEL AND DUE TO ALUMINUM PROFILES ? VICE WITH QUICK RELEASE LEVER, LONGITUDINALLY MOVABLE CLAMPING JAW, ADJUSTABLE GUIDE AND DOUBLE CLAMPING ARM FOR LOW-PROFILE CUTS ? TAPERED SAFETY COUPLING MADE OF HARDENED STEEL TO PROTECT THE SAW BLADES. ? LARGE BASE PLATE MADE OF SOLID CAST IRON FOR MAXIMUM STABILITY AND LOW-VIBRATION SAWING ? 2 SPEEDS 30 + 60 MIN-1 ? POWERFUL SPECIAL GEARBOX WITH ELASTIC COUPLING FOR HEAVY DUTY USE ? AUTOMATIC COOLING DIRECTLY ON THE SAW BLADE ? DOUBLE SAW HEAD MOUNTED ? SAFETY SWITCH 24 V IN THE HANDLE WITH RESTART INTERLOCK ? LENGTH STOP, ASSEMBLY TOOL ? MACHINE BASE (OPTION) EXTRA PRICE 499, -EUR SAW BLADE DIAMETER 315/350 MM CUTTING AREA AT 90 DEGREES: AROUND 125 MM CUTTING AREA AT 90 DEGREES: SQUARE 110 MM CUTTING AREA AT 90 DEGREES: FLAT 160X90 MM CUTTING AREA AT 45 DEGREES: AROUND 105 MM CUTTING AREA AT 45 DEGREES: SQUARE 90 MM CUTTING AREA AT 60 DEGREES: FLAT 80X100 MM TOTAL POWER REQUIRED 1.8 / 2.5 KW MACHINE WEIGHT APPROX. 0.2 T SPACE REQUIRED APPROX. 0.6 X 1.22 X 1.06 M
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-work area: 3,060 x 1,340 mm
x-y travel: 3.449 x 1,450 mm
z axis run length: 200 mm
clearance height: 180 mm

facilities:

drill head with 12 + 6 spindles, 2.2 kw, 4,000 rpm, pitch 32 mm, recording m10 with passitz 11 mm
-7 vertical spindles x
-5 vertical spindles y
-4 horizontal spindles in x (2 + 2)
-2 horizontal spindles y (1 + 1)

milling unit, hsk63f
1,500 24,000 rpm, 4.4 kw, re-li run

tool changer of r8l mobile in x
8 removable seats, maximum tool diameter 120 mm,.
maximum tool weight: 4.5 kg
for all tools: 22 kg

work table with 6 tv requirements.
-pneum.. loading help

vacuum pump 100 mâ³/h

central dust nozzle, ã?300 mm, vacuum 3,000 pa, speed 30 m / s technical data:
total power: 16 kw
rec. before hedging: 64 a (400v, 50 hz)
compressed air: 6-7 bar
system pressure: 10 bar
compressed air consumption 150 ni/min
weight: 3,200 kg
space requirements: approx. 6,300 x 3,650 mm
 WORK AREA: 3,060 X 1,340 MM X-Y TRAVEL: 3.449 X 1,450 MM Z AXIS RUN LENGTH: 200 MM CLEARANCE HEIGHT: 180 MM FACILITIES: DRILL HEAD WITH 12 + 6 SPINDLES, 2.2 KW, 4,000 RPM, PITCH 32 MM, RECORDING M10 WITH PASSITZ 11 MM -7 VERTICAL SPINDLES X -5 VERTICAL SPINDLES Y -4 HORIZONTAL SPINDLES IN X (2 + 2) -2 HORIZONTAL SPINDLES Y (1 + 1) MILLING UNIT, HSK63F 1,500 24,000 RPM, 4.4 KW, RE-LI RUN TOOL CHANGER OF R8L MOBILE IN X 8 REMOVABLE SEATS, MAXIMUM TOOL DIAMETER 120 MM,. MAXIMUM TOOL WEIGHT: 4.5 KG FOR ALL TOOLS: 22 KG WORK TABLE WITH 6 TV REQUIREMENTS. -PNEUM.. LOADING HELP VACUUM PUMP 100 M&ACIRC;&SUP3;/H CENTRAL DUST NOZZLE, &ATILDE;?300 MM, VACUUM 3,000 PA, SPEED 30 M / S TECHNICAL DATA: TOTAL POWER: 16 KW REC. BEFORE HEDGING: 64 A (400V, 50 HZ) COMPRESSED AIR: 6-7 BAR SYSTEM PRESSURE: 10 BAR COMPRESSED AIR CONSUMPTION 150 NI/MIN WEIGHT: 3,200 KG SPACE REQUIREMENTS: APPROX. 6,300 X 3,650 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 7.900 €
Ubicación: Land-weight approx.: 1800 kg<br/>dimensions (l x w x h) approx.: 1500 x 1050 x 1400 mm<br/>description: profile bending machine with: - foot pedal right / left - recording: shaft 80mm - with digital display - hardened special steel shafts - 1 set of standard rollers - lower rollers are driven - upper roll up and down hydraulically deliverable - horizontal and vertical operation - engine with braking device round material solid 75 (800) mm square material solid 60 (750) mm angle steel 80 x 80 x 8 (800) mm t - steel bridge to the outside 100 x 11 (1000) mm axis diameter 80 mm working speed 6.0 m / min tool diameter 242 mm total power requirement 4 kw machine weight approx. 1.8 t space required approx. 1.5 x 1.05 x 1.4 m WEIGHT APPROX.: 1800 KG
DIMENSIONS (L X W X H) APPROX.: 1500 X 1050 X 1400 MM
DESCRIPTION: PROFILE BENDING MACHINE WITH: - FOOT PEDAL RIGHT / LEFT - RECORDING: SHAFT 80MM - WITH DIGITAL DISPLAY - HARDENED SPECIAL STEEL SHAFTS - 1 SET OF STANDARD ROLLERS - LOWER ROLLERS ARE DRIVEN - UPPER ROLL UP AND DOWN HYDRAULICALLY DELIVERABLE - HORIZONTAL AND VERTICAL OPERATION - ENGINE WITH BRAKING DEVICE ROUND MATERIAL SOLID 75 (800) MM SQUARE MATERIAL SOLID 60 (750) MM ANGLE STEEL 80 X 80 X 8 (800) MM T - STEEL BRIDGE TO THE OUTSIDE 100 X 11 (1000) MM AXIS DIAMETER 80 MM WORKING SPEED 6.0 M / MIN TOOL DIAMETER 242 MM TOTAL POWER REQUIREMENT 4 KW MACHINE WEIGHT APPROX. 1.8 T SPACE REQUIRED APPROX. 1.5 X 1.05 X 1.4 M
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-facilities:

-matrix table 3100 x 2250 mm
with grooves in the grid to the recording
templates, vacuum cleaners and workpieces.

-powercontrol pc85 control, with woodwop user software

-f1-hsk63-9 kw
automatic tool change spindles in combination with a tool change magazine.

-w12 side
automatic tool change magazine with 12 seats.

v12 high-speed 7500
vertical drilling unit with 12 spindles

horiz. gearbox m. 2 spindles x direction

horiz. gearbox m. 2 spindles y-direction

modified table with 8 switchable fields

extension of the fence system, front right
-4 pneumatic retractable al workpiece stops

extension of the fence system, front left
-4 pneumatic retractable al workpiece stops

cold air nozzle for hsk tool change spindle
by the use of chilled air
the temperature in the cutting area decreased, causing higher cutting speeds and downtime can be reached.

rod ionization system for hsk63 tool change spindle
the static discharge from plastic chips

tool length control
suitable for length measurement of shaft tools. FACILITIES: -MATRIX TABLE 3100 X 2250 MM WITH GROOVES IN THE GRID TO THE RECORDING TEMPLATES, VACUUM CLEANERS AND WORKPIECES. -POWERCONTROL PC85 CONTROL, WITH WOODWOP USER SOFTWARE -F1-HSK63-9 KW AUTOMATIC TOOL CHANGE SPINDLES IN COMBINATION WITH A TOOL CHANGE MAGAZINE. -W12 SIDE AUTOMATIC TOOL CHANGE MAGAZINE WITH 12 SEATS. V12 HIGH-SPEED 7500 VERTICAL DRILLING UNIT WITH 12 SPINDLES HORIZ. GEARBOX M. 2 SPINDLES X DIRECTION HORIZ. GEARBOX M. 2 SPINDLES Y-DIRECTION MODIFIED TABLE WITH 8 SWITCHABLE FIELDS EXTENSION OF THE FENCE SYSTEM, FRONT RIGHT -4 PNEUMATIC RETRACTABLE AL WORKPIECE STOPS EXTENSION OF THE FENCE SYSTEM, FRONT LEFT -4 PNEUMATIC RETRACTABLE AL WORKPIECE STOPS COLD AIR NOZZLE FOR HSK TOOL CHANGE SPINDLE BY THE USE OF CHILLED AIR THE TEMPERATURE IN THE CUTTING AREA DECREASED, CAUSING HIGHER CUTTING SPEEDS AND DOWNTIME CAN BE REACHED. ROD IONIZATION SYSTEM FOR HSK63 TOOL CHANGE SPINDLE THE STATIC DISCHARGE FROM PLASTIC CHIPS TOOL LENGTH CONTROL SUITABLE FOR LENGTH MEASUREMENT OF SHAFT TOOLS.
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-tool changer chain, chain magazine, tool change system, tool magazine<br /><br />-the tool changer was upgraded by us from a cnc machining center make: hitachi seiki type: hc400. other spare parts available.<br />tool changer for hitachi seiki type hc400<br />-complete with gripper arm and drive<br />-80 tool change places<br />recording sk<br />dimensions 2270/630 / h1725 mm<br />-eigen weight 860 kg TOOL CHANGER CHAIN, CHAIN MAGAZINE, TOOL CHANGE SYSTEM, TOOL MAGAZINE

-THE TOOL CHANGER WAS UPGRADED BY US FROM A CNC MACHINING CENTER MAKE: HITACHI SEIKI TYPE: HC400. OTHER SPARE PARTS AVAILABLE.
TOOL CHANGER FOR HITACHI SEIKI TYPE HC400
-COMPLETE WITH GRIPPER ARM AND DRIVE
-80 TOOL CHANGE PLACES
RECORDING SK
DIMENSIONS 2270/630 / H1725 MM
-EIGEN WEIGHT 860 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-features:
-autom. central lubrication system
-management system in x via rack and pinion
-guide system in y and z of ball screw
-traverse path x/y/z: 3,550/1,680/275 mm
-x/y/z working area: 3,060/1,210/100 mm
(y = 1,260 mm at rear stop series
-speed x/y/z: 80/80/25 m / min
-laser for vacuum cleaner positioning
hand terminal - 2 edit boxes for pendulum occupancy
-6 work-piece supports with front and rear stop series
-vacuum pump 90 mâ³/h (vane
pump), 3kw
-spindle 9 kw, hsk f63
-horizontal milling motor 4,5 kw
-interpolating c axis 0-360 â° for milling spindle 9 kw
-side pick-up place for 2 tools / units in y direction â?? moving with tool changer in the bracket with 8 slots for hsk f63
-drill head dh20 6 h 1 s: * vertical drilling unit with 9 spindles in x direction and 5 spindles in y-direction
* horizontal boring unit with 4 spindles in x direction and 2 spindles in y-direction
* x nutsã¤ge, max ã? 120 mm
-machine com. ce conformity
-suction socket 㸠200 mm

included:
swivel unit, er25 output for recording ines drilling, milling. or saw tool hsk f63
-0-100 â° swivel range
-unit drive shaft can be rotated 360 â°
-maximum blade ã? 180 mm FEATURES: -AUTOM. CENTRAL LUBRICATION SYSTEM -MANAGEMENT SYSTEM IN X VIA RACK AND PINION -GUIDE SYSTEM IN Y AND Z OF BALL SCREW -TRAVERSE PATH X/Y/Z: 3,550/1,680/275 MM -X/Y/Z WORKING AREA: 3,060/1,210/100 MM (Y = 1,260 MM AT REAR STOP SERIES -SPEED X/Y/Z: 80/80/25 M / MIN -LASER FOR VACUUM CLEANER POSITIONING HAND TERMINAL - 2 EDIT BOXES FOR PENDULUM OCCUPANCY -6 WORK-PIECE SUPPORTS WITH FRONT AND REAR STOP SERIES -VACUUM PUMP 90 M&ACIRC;&SUP3;/H (VANE PUMP), 3KW -SPINDLE 9 KW, HSK F63 -HORIZONTAL MILLING MOTOR 4,5 KW -INTERPOLATING C AXIS 0-360 &ACIRC;&DEG; FOR MILLING SPINDLE 9 KW -SIDE PICK-UP PLACE FOR 2 TOOLS / UNITS IN Y DIRECTION &ACIRC;?? MOVING WITH TOOL CHANGER IN THE BRACKET WITH 8 SLOTS FOR HSK F63 -DRILL HEAD DH20 6 H 1 S: * VERTICAL DRILLING UNIT WITH 9 SPINDLES IN X DIRECTION AND 5 SPINDLES IN Y-DIRECTION * HORIZONTAL BORING UNIT WITH 4 SPINDLES IN X DIRECTION AND 2 SPINDLES IN Y-DIRECTION * X NUTS&ATILDE;&CURREN;GE, MAX &ATILDE;? 120 MM -MACHINE COM. CE CONFORMITY -SUCTION SOCKET &ATILDE;&CEDIL; 200 MM INCLUDED: SWIVEL UNIT, ER25 OUTPUT FOR RECORDING INES DRILLING, MILLING. OR SAW TOOL HSK F63 -0-100 &ACIRC;&DEG; SWIVEL RANGE -UNIT DRIVE SHAFT CAN BE ROTATED 360 &ACIRC;&DEG; -MAXIMUM BLADE &ATILDE;? 180 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-motor spindle with control, milling spindle,<br /><br />-milling / drilling<br />-motor spindle was for testing on a robot<br />-hours 4350 hrs<br />-motor spindle with inverter 55 kw<br />-recording hsk32<br />-hydraulic tool clamping<br />-spindle cooling<br />-control cable<br />-dimensions control cabinet 1118/800 / h2430 mm<br />-weight 694 kg MOTOR SPINDLE WITH CONTROL, MILLING SPINDLE,

-MILLING / DRILLING
-MOTOR SPINDLE WAS FOR TESTING ON A ROBOT
-HOURS 4350 HRS
-MOTOR SPINDLE WITH INVERTER 55 KW
-RECORDING HSK32
-HYDRAULIC TOOL CLAMPING
-SPINDLE COOLING
-CONTROL CABLE
-DIMENSIONS CONTROL CABINET 1118/800 / H2430 MM
-WEIGHT 694 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-features:
-format (with radius outside/inside)
-various hole patterns (32 mm grid).
-front-side holes
-holes from above and below
-fitting holes
-slots

facilities:
-drilling unit with 18 individually retrievable spindles
-electrospindle with pneum. werkzeugschnellwechselsystem

technical data:
drilling unit:
length x 3.000 mm
length y 1,300 mm
travel speed 24 u/min
z axis stroke 65 mm
engine speed 30000 rpm
maximum workpiece thickness for drilling 65 mm
-recordings of drill 㸠10 mm
-spindle speed 4,000 rpm
-vacuum pump 100 cbm
milling unit:
spindle drive strength 7.5 hp
spindle speed 18,000 rpm

mass of machine 4,400 x 1,600 x 2,500 mm
weight: approx. 1.200 kg
 FEATURES: -FORMAT (WITH RADIUS OUTSIDE/INSIDE) -VARIOUS HOLE PATTERNS (32 MM GRID). -FRONT-SIDE HOLES -HOLES FROM ABOVE AND BELOW -FITTING HOLES -SLOTS FACILITIES: -DRILLING UNIT WITH 18 INDIVIDUALLY RETRIEVABLE SPINDLES -ELECTROSPINDLE WITH PNEUM. WERKZEUGSCHNELLWECHSELSYSTEM TECHNICAL DATA: DRILLING UNIT: LENGTH X 3.000 MM LENGTH Y 1,300 MM TRAVEL SPEED 24 U/MIN Z AXIS STROKE 65 MM ENGINE SPEED 30000 RPM MAXIMUM WORKPIECE THICKNESS FOR DRILLING 65 MM -RECORDINGS OF DRILL &ATILDE;&CEDIL; 10 MM -SPINDLE SPEED 4,000 RPM -VACUUM PUMP 100 CBM MILLING UNIT: SPINDLE DRIVE STRENGTH 7.5 HP SPINDLE SPEED 18,000 RPM MASS OF MACHINE 4,400 X 1,600 X 2,500 MM WEIGHT: APPROX. 1.200 KG
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: 3.400 €
Ubicación: Land-: 45 °<br/>: 45 °<br/>: 1,8/2,5 kw<br/>: 160 mm<br/>: 600 mm<br/>: 1.220 mm<br/>: 1.060 mm<br/>: 206 kg<br/>very robust construction suited to cut metal profiles and solids (steel with resistance up to 70 kg/mm²)<br/>vice with quick clamping device and additional clapming strip for reduced cuttinag burr<br/>reduction gear and clutch to save the gear and sawing blades<br/>coolant equiptment<br/>sawing blade protection<br/>material stop<br/>thermic and magnetic motor protection<br/>90° longitudinal cuts are possible thanks to the rotating vice<br/>users manual in german<br/><br/>(sawing blade not included)<br/><br/>options:<br/><br/>sawing balde for mild steel hss 350 x 2.5 x 32 mm 180z c  ? 134,-<br/><br/>base   ? 364,-<br/><br/><br/>saw blade dimensions: 350 x (2)2,5 x 32 mm<br/>mitre left: 45°<br/>mitre right: 45°<br/>speeds: 30/60 r/min<br/>motor: 1,8/2,5 kw<br/>cutting capacity 90°: round 125 mm, square 110 mm, rectangle 160 x 90 mm<br/>cutting capacity 45° right: round 105 mm, square 90 mm, rectangle 80 x 100 mm<br/>cutting capacity 45° left: round 70 mm, square 65 mm, rectangle 60 x 70 mm<br/>width of the opening: 160 mm<br/>width: 600 mm<br/>depth: 1.220 mm<br/>height: 1.060 mm<br/>weight: 206 kg<br/><br/><br/><br/> : 45 °
: 45 °
: 1,8/2,5 KW
: 160 MM
: 600 MM
: 1.220 MM
: 1.060 MM
: 206 KG
VERY ROBUST CONSTRUCTION SUITED TO CUT METAL PROFILES AND SOLIDS (STEEL WITH RESISTANCE UP TO 70 KG/MM²)
VICE WITH QUICK CLAMPING DEVICE AND ADDITIONAL CLAPMING STRIP FOR REDUCED CUTTINAG BURR
REDUCTION GEAR AND CLUTCH TO SAVE THE GEAR AND SAWING BLADES
COOLANT EQUIPTMENT
SAWING BLADE PROTECTION
MATERIAL STOP
THERMIC AND MAGNETIC MOTOR PROTECTION
90° LONGITUDINAL CUTS ARE POSSIBLE THANKS TO THE ROTATING VICE
USERS MANUAL IN GERMAN

(SAWING BLADE NOT INCLUDED)

OPTIONS:

SAWING BALDE FOR MILD STEEL HSS 350 X 2.5 X 32 MM 180Z C  ? 134,-

BASE   ? 364,-


SAW BLADE DIMENSIONS: 350 X (2)2,5 X 32 MM
MITRE LEFT: 45°
MITRE RIGHT: 45°
SPEEDS: 30/60 R/MIN
MOTOR: 1,8/2,5 KW
CUTTING CAPACITY 90°: ROUND 125 MM, SQUARE 110 MM, RECTANGLE 160 X 90 MM
CUTTING CAPACITY 45° RIGHT: ROUND 105 MM, SQUARE 90 MM, RECTANGLE 80 X 100 MM
CUTTING CAPACITY 45° LEFT: ROUND 70 MM, SQUARE 65 MM, RECTANGLE 60 X 70 MM
WIDTH OF THE OPENING: 160 MM
WIDTH: 600 MM
DEPTH: 1.220 MM
HEIGHT: 1.060 MM
WEIGHT: 206 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-11.0 general description of the basic machine:

1.1 basic machine:
the machine basic frame as well as the travelling column are statically and dynamically as a rigid welded construction.

the central plate of the editing support serves to accommodate of the processing units.
the control cabinet is right on the operator's side.

1.2 management system:
the movement of the axes (x - y - z) is carried out on all sides sealed linear guide systems.

1.3. propulsion system:
all the axes position position-controlled. the axis of movement is through hardened ball screw spindles, and per a brushless three-phase servomotor.

1.4 workpiece clamping:
6 pads are with two large-area vacuum cleaners available for clamping of the workpieces.

1.5 aggregate technique:
a vertical drilling unit, a horizontal boring unit, a pivoting nutsã¤ge and a upper end mill with tool changer are used as processing units.

1.6 electronics:
as a control system, all weeke machining centres are equipped with homatic 2000 system and the easy to use programming software woodwop.

1.7 safety equipment:
a dust - and soundproofing hood, as well as light barrier in the operating area secure the operating staff. rear or side guards are available depending on the requirement.

1.8 extraction:
a suction nozzle mounted centrally on the editing support allows for an easy connection to the central extraction system.

1.9 documentation:
a comprehensive and clear documentation of the machine is enclosed in simple design of the machine.

2.0 technical specification

2.0.1 machine

procedures
x 3350 mm
y axis 1200 mm
z axle 140 mm

work table
length 2750 mm
width 900 mm
document height 90 mm
(the processing amount may vary by the length of the tool)

travel speeds
x-axis 65 m / min
y axis 50 m / min
z axis 15 m / min

2.0.2 workpiece clamping
-4 adjustable in x direction adjustable work-piece supports, pneumatic relaxed - regulations on dust-protected, hardened and ground round management system
-2 copies of the workpiece is firmly fixed (left and right)
-8 programmatic work piece stops
-6 werkstã¼ckeinlegehilfen
-automatic cleaners and pad clamp
-vacuum pump 100 m3/h

2.1 aggregate technique:

1 vertical drilling unit with 18 programmatic spindles

travel range:
x direction 2750 mm with all spindles
y direction 914 mm all spindles
y direction to 1106 mm
-vorlegehub z-direction 40 mm
-drilling depth 38 mm
-direction of rotation left / right
-speed 1/min. 4250
-drive 1.5 kw, 50 hz, helical gears
-recording of drill 10 mm
-drilling diameter of 20 mm (18 spindles)
35 mm (2 shafts with reinforced execution)
-spindle distance 32 mm (16 spindles)
-spindles individually controllable
-arrangement 10 spindles x-direction (holes)
6 spindles y-direction (construction)
2 spindles x-direction (heavy duty)
-extraction central

1 horizontal boring unit with 4 screws (phillips)

travel range:
x direction 2750 mm with all spindles
y direction of 840 mm for the front side drilling
y direction of 710 mm for front drilling
-drilling height z-direction 38 mm
-drilling depth of 38 mm
-direction of rotation right
-speed 6050 rpm.
-drive 1.5 kw, 50 hz
-recording of drill 10 mm
-drilling diameter of 20 mm
-arrangement phillips

1 nutsã¤ge automatically swivel 90 degrees

travel range:

x direction 2750 mm (plus outlet)
y direction 1179 mm (at x position)
1099 mm (at y position)
-depth of cut: z direction 20 mm
-cutting cross-section: max. 60 mm2
-direction of rotation: right
-speed: 5590 u/min
-drive: 1.5 kw, 50 hz
-blade holder: 30 mm
-diameter: 150 mm
-blade thickness: max 8 mm
-rotation: 0 degrees and 90 degrees programmatically
-extraction: central

1 tool change spindles 7.5 kw
with tool change magazine

travel range:
x direction 2750 mm
y direction 1091 mm (minus wz wheel.)
-z direction per tool up to 85 mm (sep. list of tools)
-sleeve: for sk 30 - taper
-tool diameter: 100 mm
-tool weight: 3.5 kg incl. sleeve
-tool collection: automatically
-direction of rotation: right / left programmable
-speed: stepless 1250-18000 u/min programmable
-drive: frequency-controlled three-phase motor
-power: 7,5 kw
-spindle lubrication: grease, permanently lubricated
-cooling: liquid circulation cooling
-security: spindle prompt for sk 30 cone
-extraction: central
-magazine places: 6
-layout: on the right side of the engine (pickup-system)

2.2 general technical data:

machine dimensions:
machine length 4390 mm
machine width 3500 mm
machine height 2100 mm

dimensions:
length 5800 mm
6550 mm min. dimensions
width 3500 mm

connections:

pneumatic:
-compressed air 6 bar, r 1/2 inch with compressed air servicing unit
-air consumption approx. 10 nl

extraction:
-diameter d = 200
-consumption approx. 3400 m3/h
-air velocity 30 m/s
-vacuum 150 mm ws

electrics:
-installation according to the regulations of the vde
-protection class ip 54
-operating voltage 3 400 volts +/-5%,.
frequency 50 hz (this power not be respected, so a constant voltage transformers must be installed at the expense of the buyer.)
-connected load approx. 14 kw
machine weight: approximately 4250 kg
floor load: 200 n/cm2

2.3 control homatic 2000

2.3.1 hardware
industrial multi computer system
cnc path control is equipped with three position-controlled axes (x, y, and z). in the axes x, y, and z can be interpolated simultaneously, with each with 2 axes circular interpolation can be performed. the 3rd can axis as a linear axis are switched on. the integrated
plc takes over the control of all machine functions. all state messages (inputs and outputs) are indicated by leds

industrial pc (ipc)
the standard ipc takes over the tasks of the user guidance. all entries and the programming of the machine are made here to the ipc.
-486 ipc
-8 mb ram memory
-170 mbyte harddisk storage
-3 1/2 inch floppy drive
-serial interface rs 232 for serial data transmission up to 15 m
-free slot for network
14 inch, vga monitor, colour graphics

2.3.2 software
-automatic reference point driving all axes
-tool management with speed control and automatic tool compensation settlement
woodwop 2.5: the workshop-oriented programming system for trades and industry
-8-digit alphanumeric program and under program designation
-options (parameters) programming technology
-icon technology
-fault diagnosis
-block functions and sub-routine techniques with local and global parameters allocation
-zoom functions
-integration of algorithmic formulas in the workpiece programming
-zero offset
-automatic mirroring of the editors
-copying, duplicating and deleting editing types
-locking individual edits through allocation of conditions (and, or, equally, larger, smaller, etc...)
-graphical representation of workpiece the workpiece in 3 levels
-item search function
-bag cycle (circle, slot and rectangular pocket)
-ellipse function (inner - and outer ellipse)
-programming and presentation of the work-piece supports and vacuum cleaner
-optimization of the editor

g. 0001 number: 0036 1 piece
vakuumanschluã? f. templates re. side of the machine
vacuum connection for stencils incl. filter. with this facility, home-made vacuum stencils can be connected to the machine by means of hoses and couplings vacuum circuit.
 11.0 GENERAL DESCRIPTION OF THE BASIC MACHINE: 1.1 BASIC MACHINE: THE MACHINE BASIC FRAME AS WELL AS THE TRAVELLING COLUMN ARE STATICALLY AND DYNAMICALLY AS A RIGID WELDED CONSTRUCTION. THE CENTRAL PLATE OF THE EDITING SUPPORT SERVES TO ACCOMMODATE OF THE PROCESSING UNITS. THE CONTROL CABINET IS RIGHT ON THE OPERATOR'S SIDE. 1.2 MANAGEMENT SYSTEM: THE MOVEMENT OF THE AXES (X - Y - Z) IS CARRIED OUT ON ALL SIDES SEALED LINEAR GUIDE SYSTEMS. 1.3. PROPULSION SYSTEM: ALL THE AXES POSITION POSITION-CONTROLLED. THE AXIS OF MOVEMENT IS THROUGH HARDENED BALL SCREW SPINDLES, AND PER A BRUSHLESS THREE-PHASE SERVOMOTOR. 1.4 WORKPIECE CLAMPING: 6 PADS ARE WITH TWO LARGE-AREA VACUUM CLEANERS AVAILABLE FOR CLAMPING OF THE WORKPIECES. 1.5 AGGREGATE TECHNIQUE: A VERTICAL DRILLING UNIT, A HORIZONTAL BORING UNIT, A PIVOTING NUTS&ATILDE;&CURREN;GE AND A UPPER END MILL WITH TOOL CHANGER ARE USED AS PROCESSING UNITS. 1.6 ELECTRONICS: AS A CONTROL SYSTEM, ALL WEEKE MACHINING CENTRES ARE EQUIPPED WITH HOMATIC 2000 SYSTEM AND THE EASY TO USE PROGRAMMING SOFTWARE WOODWOP. 1.7 SAFETY EQUIPMENT: A DUST - AND SOUNDPROOFING HOOD, AS WELL AS LIGHT BARRIER IN THE OPERATING AREA SECURE THE OPERATING STAFF. REAR OR SIDE GUARDS ARE AVAILABLE DEPENDING ON THE REQUIREMENT. 1.8 EXTRACTION: A SUCTION NOZZLE MOUNTED CENTRALLY ON THE EDITING SUPPORT ALLOWS FOR AN EASY CONNECTION TO THE CENTRAL EXTRACTION SYSTEM. 1.9 DOCUMENTATION: A COMPREHENSIVE AND CLEAR DOCUMENTATION OF THE MACHINE IS ENCLOSED IN SIMPLE DESIGN OF THE MACHINE. 2.0 TECHNICAL SPECIFICATION 2.0.1 MACHINE PROCEDURES X 3350 MM Y AXIS 1200 MM Z AXLE 140 MM WORK TABLE LENGTH 2750 MM WIDTH 900 MM DOCUMENT HEIGHT 90 MM (THE PROCESSING AMOUNT MAY VARY BY THE LENGTH OF THE TOOL) TRAVEL SPEEDS X-AXIS 65 M / MIN Y AXIS 50 M / MIN Z AXIS 15 M / MIN 2.0.2 WORKPIECE CLAMPING -4 ADJUSTABLE IN X DIRECTION ADJUSTABLE WORK-PIECE SUPPORTS, PNEUMATIC RELAXED - REGULATIONS ON DUST-PROTECTED, HARDENED AND GROUND ROUND MANAGEMENT SYSTEM -2 COPIES OF THE WORKPIECE IS FIRMLY FIXED (LEFT AND RIGHT) -8 PROGRAMMATIC WORK PIECE STOPS -6 WERKST&ATILDE;&FRAC14;CKEINLEGEHILFEN -AUTOMATIC CLEANERS AND PAD CLAMP -VACUUM PUMP 100 M3/H 2.1 AGGREGATE TECHNIQUE: 1 VERTICAL DRILLING UNIT WITH 18 PROGRAMMATIC SPINDLES TRAVEL RANGE: X DIRECTION 2750 MM WITH ALL SPINDLES Y DIRECTION 914 MM ALL SPINDLES Y DIRECTION TO 1106 MM -VORLEGEHUB Z-DIRECTION 40 MM -DRILLING DEPTH 38 MM -DIRECTION OF ROTATION LEFT / RIGHT -SPEED 1/MIN. 4250 -DRIVE 1.5 KW, 50 HZ, HELICAL GEARS -RECORDING OF DRILL 10 MM -DRILLING DIAMETER OF 20 MM (18 SPINDLES) 35 MM (2 SHAFTS WITH REINFORCED EXECUTION) -SPINDLE DISTANCE 32 MM (16 SPINDLES) -SPINDLES INDIVIDUALLY CONTROLLABLE -ARRANGEMENT 10 SPINDLES X-DIRECTION (HOLES) 6 SPINDLES Y-DIRECTION (CONSTRUCTION) 2 SPINDLES X-DIRECTION (HEAVY DUTY) -EXTRACTION CENTRAL 1 HORIZONTAL BORING UNIT WITH 4 SCREWS (PHILLIPS) TRAVEL RANGE: X DIRECTION 2750 MM WITH ALL SPINDLES Y DIRECTION OF 840 MM FOR THE FRONT SIDE DRILLING Y DIRECTION OF 710 MM FOR FRONT DRILLING -DRILLING HEIGHT Z-DIRECTION 38 MM -DRILLING DEPTH OF 38 MM -DIRECTION OF ROTATION RIGHT -SPEED 6050 RPM. -DRIVE 1.5 KW, 50 HZ -RECORDING OF DRILL 10 MM -DRILLING DIAMETER OF 20 MM -ARRANGEMENT PHILLIPS 1 NUTS&ATILDE;&CURREN;GE AUTOMATICALLY SWIVEL 90 DEGREES TRAVEL RANGE: X DIRECTION 2750 MM (PLUS OUTLET) Y DIRECTION 1179 MM (AT X POSITION) 1099 MM (AT Y POSITION) -DEPTH OF CUT: Z DIRECTION 20 MM -CUTTING CROSS-SECTION: MAX. 60 MM2 -DIRECTION OF ROTATION: RIGHT -SPEED: 5590 U/MIN -DRIVE: 1.5 KW, 50 HZ -BLADE HOLDER: 30 MM -DIAMETER: 150 MM -BLADE THICKNESS: MAX 8 MM -ROTATION: 0 DEGREES AND 90 DEGREES PROGRAMMATICALLY -EXTRACTION: CENTRAL 1 TOOL CHANGE SPINDLES 7.5 KW WITH TOOL CHANGE MAGAZINE TRAVEL RANGE: X DIRECTION 2750 MM Y DIRECTION 1091 MM (MINUS WZ WHEEL.) -Z DIRECTION PER TOOL UP TO 85 MM (SEP. LIST OF TOOLS) -SLEEVE: FOR SK 30 - TAPER -TOOL DIAMETER: 100 MM -TOOL WEIGHT: 3.5 KG INCL. SLEEVE -TOOL COLLECTION: AUTOMATICALLY -DIRECTION OF ROTATION: RIGHT / LEFT PROGRAMMABLE -SPEED: STEPLESS 1250-18000 U/MIN PROGRAMMABLE -DRIVE: FREQUENCY-CONTROLLED THREE-PHASE MOTOR -POWER: 7,5 KW -SPINDLE LUBRICATION: GREASE, PERMANENTLY LUBRICATED -COOLING: LIQUID CIRCULATION COOLING -SECURITY: SPINDLE PROMPT FOR SK 30 CONE -EXTRACTION: CENTRAL -MAGAZINE PLACES: 6 -LAYOUT: ON THE RIGHT SIDE OF THE ENGINE (PICKUP-SYSTEM) 2.2 GENERAL TECHNICAL DATA: MACHINE DIMENSIONS: MACHINE LENGTH 4390 MM MACHINE WIDTH 3500 MM MACHINE HEIGHT 2100 MM DIMENSIONS: LENGTH 5800 MM 6550 MM MIN. DIMENSIONS WIDTH 3500 MM CONNECTIONS: PNEUMATIC: -COMPRESSED AIR 6 BAR, R 1/2 INCH WITH COMPRESSED AIR SERVICING UNIT -AIR CONSUMPTION APPROX. 10 NL EXTRACTION: -DIAMETER D = 200 -CONSUMPTION APPROX. 3400 M3/H -AIR VELOCITY 30 M/S -VACUUM 150 MM WS ELECTRICS: -INSTALLATION ACCORDING TO THE REGULATIONS OF THE VDE -PROTECTION CLASS IP 54 -OPERATING VOLTAGE 3 400 VOLTS +/-5%,. FREQUENCY 50 HZ (THIS POWER NOT BE RESPECTED, SO A CONSTANT VOLTAGE TRANSFORMERS MUST BE INSTALLED AT THE EXPENSE OF THE BUYER.) -CONNECTED LOAD APPROX. 14 KW MACHINE WEIGHT: APPROXIMATELY 4250 KG FLOOR LOAD: 200 N/CM2 2.3 CONTROL HOMATIC 2000 2.3.1 HARDWARE INDUSTRIAL MULTI COMPUTER SYSTEM CNC PATH CONTROL IS EQUIPPED WITH THREE POSITION-CONTROLLED AXES (X, Y, AND Z). IN THE AXES X, Y, AND Z CAN BE INTERPOLATED SIMULTANEOUSLY, WITH EACH WITH 2 AXES CIRCULAR INTERPOLATION CAN BE PERFORMED. THE 3RD CAN AXIS AS A LINEAR AXIS ARE SWITCHED ON. THE INTEGRATED PLC TAKES OVER THE CONTROL OF ALL MACHINE FUNCTIONS. ALL STATE MESSAGES (INPUTS AND OUTPUTS) ARE INDICATED BY LEDS INDUSTRIAL PC (IPC) THE STANDARD IPC TAKES OVER THE TASKS OF THE USER GUIDANCE. ALL ENTRIES AND THE PROGRAMMING OF THE MACHINE ARE MADE HERE TO THE IPC. -486 IPC -8 MB RAM MEMORY -170 MBYTE HARDDISK STORAGE -3 1/2 INCH FLOPPY DRIVE -SERIAL INTERFACE RS 232 FOR SERIAL DATA TRANSMISSION UP TO 15 M -FREE SLOT FOR NETWORK 14 INCH, VGA MONITOR, COLOUR GRAPHICS 2.3.2 SOFTWARE -AUTOMATIC REFERENCE POINT DRIVING ALL AXES -TOOL MANAGEMENT WITH SPEED CONTROL AND AUTOMATIC TOOL COMPENSATION SETTLEMENT WOODWOP 2.5: THE WORKSHOP-ORIENTED PROGRAMMING SYSTEM FOR TRADES AND INDUSTRY -8-DIGIT ALPHANUMERIC PROGRAM AND UNDER PROGRAM DESIGNATION -OPTIONS (PARAMETERS) PROGRAMMING TECHNOLOGY -ICON TECHNOLOGY -FAULT DIAGNOSIS -BLOCK FUNCTIONS AND SUB-ROUTINE TECHNIQUES WITH LOCAL AND GLOBAL PARAMETERS ALLOCATION -ZOOM FUNCTIONS -INTEGRATION OF ALGORITHMIC FORMULAS IN THE WORKPIECE PROGRAMMING -ZERO OFFSET -AUTOMATIC MIRRORING OF THE EDITORS -COPYING, DUPLICATING AND DELETING EDITING TYPES -LOCKING INDIVIDUAL EDITS THROUGH ALLOCATION OF CONDITIONS (AND, OR, EQUALLY, LARGER, SMALLER, ETC...) -GRAPHICAL REPRESENTATION OF WORKPIECE THE WORKPIECE IN 3 LEVELS -ITEM SEARCH FUNCTION -BAG CYCLE (CIRCLE, SLOT AND RECTANGULAR POCKET) -ELLIPSE FUNCTION (INNER - AND OUTER ELLIPSE) -PROGRAMMING AND PRESENTATION OF THE WORK-PIECE SUPPORTS AND VACUUM CLEANER -OPTIMIZATION OF THE EDITOR G. 0001 NUMBER: 0036 1 PIECE VAKUUMANSCHLU&ATILDE;? F. TEMPLATES RE. SIDE OF THE MACHINE VACUUM CONNECTION FOR STENCILS INCL. FILTER. WITH THIS FACILITY, HOME-MADE VACUUM STENCILS CAN BE CONNECTED TO THE MACHINE BY MEANS OF HOSES AND COUPLINGS VACUUM CIRCUIT.
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-: 75 (800) mm<br/>: 60 (750) mm<br/>l-beam: 80 x 80 x 8 (800) mm<br/>t - beam - web outwards: 100 x 11 (1000) mm<br/>axis diameter: 80 mm<br/>work speed: 6,0 m/min<br/>tool diameter: 242 mm<br/>total power requirement: 4 kw<br/>weight of the machine ca.: 1,8 t<br/>dimensions of the machine ca.: 1,5 x 1,05 x 1,4 m<br/>profile bending machine with:<br/>- foot pedal right / left<br/>- recording: wave 50mm<br/>- with digital display<br/>- hardened special steel shafts<br/>- 1 set of standard rollers<br/>- lower rollers are driven<br/>- upper roll up and down hydraulically deliverable<br/>- horizontal and vertical operation<br/>- engine with braking device<br/><br/><br/><br/><br/> : 75 (800) MM
: 60 (750) MM
L-BEAM: 80 X 80 X 8 (800) MM
T - BEAM - WEB OUTWARDS: 100 X 11 (1000) MM
AXIS DIAMETER: 80 MM
WORK SPEED: 6,0 M/MIN
TOOL DIAMETER: 242 MM
TOTAL POWER REQUIREMENT: 4 KW
WEIGHT OF THE MACHINE CA.: 1,8 T
DIMENSIONS OF THE MACHINE CA.: 1,5 X 1,05 X 1,4 M
PROFILE BENDING MACHINE WITH:
- FOOT PEDAL RIGHT / LEFT
- RECORDING: WAVE 50MM
- WITH DIGITAL DISPLAY
- HARDENED SPECIAL STEEL SHAFTS
- 1 SET OF STANDARD ROLLERS
- LOWER ROLLERS ARE DRIVEN
- UPPER ROLL UP AND DOWN HYDRAULICALLY DELIVERABLE
- HORIZONTAL AND VERTICAL OPERATION
- ENGINE WITH BRAKING DEVICE




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-with motorized feed in vertical and horizontal direction, as well as other functions such as immersion, brakes, from diving, etc. 

technical data:
sã¤gelbatt speed approx. 4420 / min saw blade ã? 300 mm (recording 30 mm)
4.6 motor kw
feed speed: 12/24 m / min
feed motor power: 0.35/0,55 kw
maximum clearance height 2200 mm max loading hem height 2100 mm cutting length-5.300 mm maximum workpiece thickness up to 70 mm
saw blade diameter 300 mm total connected: 5.2 kw
electr. hedging 380 v, 50 hz: 20 a slow
weight approx. 920 kg
free-standing assembly WITH MOTORIZED FEED IN VERTICAL AND HORIZONTAL DIRECTION, AS WELL AS OTHER FUNCTIONS SUCH AS IMMERSION, BRAKES, FROM DIVING, ETC. TECHNICAL DATA: S&ATILDE;&CURREN;GELBATT SPEED APPROX. 4420 / MIN SAW BLADE &ATILDE;? 300 MM (RECORDING 30 MM) 4.6 MOTOR KW FEED SPEED: 12/24 M / MIN FEED MOTOR POWER: 0.35/0,55 KW MAXIMUM CLEARANCE HEIGHT 2200 MM MAX LOADING HEM HEIGHT 2100 MM CUTTING LENGTH-5.300 MM MAXIMUM WORKPIECE THICKNESS UP TO 70 MM SAW BLADE DIAMETER 300 MM TOTAL CONNECTED: 5.2 KW ELECTR. HEDGING 380 V, 50 HZ: 20 A SLOW WEIGHT APPROX. 920 KG FREE-STANDING ASSEMBLY
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 2.500 €
Ubicación: Land-weight approx.: 24000 kg<br/>dimensions (l x w x h) approx.: 12000 x 5000 x 7000 mm<br/>description: 7 immersion baths, 3 cartridge desalinations, 1 dryer, 1 crane, 3 product baskets<br> <br> <b>bath 1:</b><br> sulphuric acid bath with cover<br> <b>bath 2 and 3:</b><br> stationary sinks<br> <b>bath 4:</b><br> fluent rinsing<br> <b>bath 5:</b><br> chromatising bath with cover<br> <b>bath 6 and 7:</b><br> stationary sinks<br> afterwards dryer oil heated<br> outside dimensions 2350 x 3500 x 5050 mm,<br> material bath 1 to 3 and bath 5: v 4 a ,<br> bath 4, 6 and 7: v 2 a,<br> outside dimensions bath 1 and 5 (each heated): 4400 x 1300 x 2300 mm,<br> bath contents each approx. 7750 l,<br> connected load each approx. 45000 kcal/h,<br> outside dimensions bath 2, 3, 4, 6 and 7 (unheated): 4400 x 1000 x 2300 mm,<br> bath contents each approx. 6100 l,<br> insulation with casing sheets for heated baths 1 and 5 each approx. 100 mm,<br> drying plant: temperature steplessly adjustable 50° to 150° c,<br> air speed 0.44 m/s,<br> quantity of circulating air in chamber 280 m³/h,<br> fan 2 x 3 kw,<br> housing insulation thickness 180 mm,<br> dryer with automatic cover,<br> oil burner power approx. 60 kw,<br> bath times bath 1 to 7: 10, 2, 2, 2, 8, 2 and 2 minutes,<br> drying time approx. 50 minutes,<br> dripping-off times between the courses approx. 5 minutes,<br> 3 product baskets incl. 3 transport trolleys,<br> crane system, width approx. 4500 mm,<br> track length approx. 22 m,<br> rail height approx. 5300 mm,<br> 2 control cabinets,<br> control siemens,<br> ph final inspection with recording device,<br> foundation depth approx. 1550 mm.<br> <br> <b>attention: machine may be without ce marking and therefore may not be approved for use or trade within the eu. interested parties have to check this before submitting a bid, e.g. by inspecting the machine on site. surplex cannot issue a ce certificate for machines! due to this probably missing property, a purchase cannot be returned la WEIGHT APPROX.: 24000 KG
DIMENSIONS (L X W X H) APPROX.: 12000 X 5000 X 7000 MM
DESCRIPTION: 7 IMMERSION BATHS, 3 CARTRIDGE DESALINATIONS, 1 DRYER, 1 CRANE, 3 PRODUCT BASKETS

BATH 1:
SULPHURIC ACID BATH WITH COVER
BATH 2 AND 3:
STATIONARY SINKS
BATH 4:
FLUENT RINSING
BATH 5:
CHROMATISING BATH WITH COVER
BATH 6 AND 7:
STATIONARY SINKS
AFTERWARDS DRYER OIL HEATED
OUTSIDE DIMENSIONS 2350 X 3500 X 5050 MM,
MATERIAL BATH 1 TO 3 AND BATH 5: V 4 A ,
BATH 4, 6 AND 7: V 2 A,
OUTSIDE DIMENSIONS BATH 1 AND 5 (EACH HEATED): 4400 X 1300 X 2300 MM,
BATH CONTENTS EACH APPROX. 7750 L,
CONNECTED LOAD EACH APPROX. 45000 KCAL/H,
OUTSIDE DIMENSIONS BATH 2, 3, 4, 6 AND 7 (UNHEATED): 4400 X 1000 X 2300 MM,
BATH CONTENTS EACH APPROX. 6100 L,
INSULATION WITH CASING SHEETS FOR HEATED BATHS 1 AND 5 EACH APPROX. 100 MM,
DRYING PLANT: TEMPERATURE STEPLESSLY ADJUSTABLE 50° TO 150° C,
AIR SPEED 0.44 M/S,
QUANTITY OF CIRCULATING AIR IN CHAMBER 280 M³/H,
FAN 2 X 3 KW,
HOUSING INSULATION THICKNESS 180 MM,
DRYER WITH AUTOMATIC COVER,
OIL BURNER POWER APPROX. 60 KW,
BATH TIMES BATH 1 TO 7: 10, 2, 2, 2, 8, 2 AND 2 MINUTES,
DRYING TIME APPROX. 50 MINUTES,
DRIPPING-OFF TIMES BETWEEN THE COURSES APPROX. 5 MINUTES,
3 PRODUCT BASKETS INCL. 3 TRANSPORT TROLLEYS,
CRANE SYSTEM, WIDTH APPROX. 4500 MM,
TRACK LENGTH APPROX. 22 M,
RAIL HEIGHT APPROX. 5300 MM,
2 CONTROL CABINETS,
CONTROL SIEMENS,
PH FINAL INSPECTION WITH RECORDING DEVICE,
FOUNDATION DEPTH APPROX. 1550 MM.

ATTENTION: MACHINE MAY BE WITHOUT CE MARKING AND THEREFORE MAY NOT BE APPROVED FOR USE OR TRADE WITHIN THE EU. INTERESTED PARTIES HAVE TO CHECK THIS BEFORE SUBMITTING A BID, E.G. BY INSPECTING THE MACHINE ON SITE. SURPLEX CANNOT ISSUE A CE CERTIFICATE FOR MACHINES! DUE TO THIS PROBABLY MISSING PROPERTY, A PURCHASE CANNOT BE RETURNED LA
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--digital display heidenhain
-three jaw chuck - tool holder multifix êºbêº
-live
-chuck
-revolving bezel
-fixed bezel
tip height 200 mm
top width 800 mm
rotation ã?
over slide 235 mm over bed 425 mm
speed 45-2240 rev/min
recording 6 camlock spindle bore 45 mm face and longitudinal feed 0.05 2.8 mm / rev
ã? of the tailstock quill 55 mm
morse taper of spindle and tailstock mk 4
spindle motor 8 hp
 -DIGITAL DISPLAY HEIDENHAIN -THREE JAW CHUCK - TOOL HOLDER MULTIFIX &ECIRC;&ORDM;B&ECIRC;&ORDM; -LIVE -CHUCK -REVOLVING BEZEL -FIXED BEZEL TIP HEIGHT 200 MM TOP WIDTH 800 MM ROTATION &ATILDE;? OVER SLIDE 235 MM OVER BED 425 MM SPEED 45-2240 REV/MIN RECORDING 6 CAMLOCK SPINDLE BORE 45 MM FACE AND LONGITUDINAL FEED 0.05 2.8 MM / REV &ATILDE;? OF THE TAILSTOCK QUILL 55 MM MORSE TAPER OF SPINDLE AND TAILSTOCK MK 4 SPINDLE MOTOR 8 HP
Vendedor: Catalano Werkzeugmaschinen AG
Año de construcción: usado
Precio: 190 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-workspace in x: 730 mm
workspace in y: 290 mm + milling head adjustment 400 mm
workspace in z: 390 mm
table size: 1000 x 300 mm

tool holder: sk 40
speed range: 28-1400 rpm
total power: 2,2 kw / 380 v
machine weight: 2100 kg

equipment / accessories

3 axis heidenhain digital display
div. dollies + recordings
milling head with drilling tailstock
horizontal milling equipment
coolant system
height adjustable machines fixators
chip protection tray
adjustable hand control panel

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the machine in advance in our factory under power.
 WORKSPACE IN X: 730 MM WORKSPACE IN Y: 290 MM + MILLING HEAD ADJUSTMENT 400 MM WORKSPACE IN Z: 390 MM TABLE SIZE: 1000 X 300 MM TOOL HOLDER: SK 40 SPEED RANGE: 28-1400 RPM TOTAL POWER: 2,2 KW / 380 V MACHINE WEIGHT: 2100 KG EQUIPMENT / ACCESSORIES 3 AXIS HEIDENHAIN DIGITAL DISPLAY DIV. DOLLIES + RECORDINGS MILLING HEAD WITH DRILLING TAILSTOCK HORIZONTAL MILLING EQUIPMENT COOLANT SYSTEM HEIGHT ADJUSTABLE MACHINES FIXATORS CHIP PROTECTION TRAY ADJUSTABLE HAND CONTROL PANEL ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE MACHINE IN ADVANCE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-slab boring machine, table boring machine, boring mill, milling machine,<br /><br />-rotatable clamping table 360 °<br />-travel distance 1800 mm<br />-table dimensions 1,300 x 1,000 mm<br />-table load approx. 2,000 kg<br />-driving lanes  z 1200 mm<br />-driving lanes y 1800 mm<br />-driving lanes x 1100 mm<br />-working spindle 100 mm<br />-pinolen stroke mm<br />-recording sk50<br />-revolutions rpm<br />-dimensions machine 3300/4600 / h3500 mm mm<br />-dimensions control cabinet 2000/500 / h2000 mm<br />-weight about 20,000 kg SLAB BORING MACHINE, TABLE BORING MACHINE, BORING MILL, MILLING MACHINE,

-ROTATABLE CLAMPING TABLE 360 °
-TRAVEL DISTANCE 1800 MM
-TABLE DIMENSIONS 1,300 X 1,000 MM
-TABLE LOAD APPROX. 2,000 KG
-DRIVING LANES Z 1200 MM
-DRIVING LANES Y 1800 MM
-DRIVING LANES X 1100 MM
-WORKING SPINDLE 100 MM
-PINOLEN STROKE MM
-RECORDING SK50
-REVOLUTIONS RPM
-DIMENSIONS MACHINE 3300/4600 / H3500 MM MM
-DIMENSIONS CONTROL CABINET 2000/500 / H2000 MM
-WEIGHT ABOUT 20,000 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more RECORD types: