140 ofertas

Año de construcción: usado
Ubicación: Land-complete pet bottle filling line 5.500 bph

this complete line has been built in 2006 and 2007 – installed in 2007 and has been taken out of service in 2016. the line has filling non carbonated soft drinks in pet bottles cap pco 28 mm. frequent maintenance is still taking place (greasing and startup / test runs). it is completely installed and in excellent condition. dry end of the line is being used for repacking purpose. line has run 3 different bottle formats (biggest 2.0 liters). spare parts (limited) are available, all documentation is available. the line is in good condition, installed and powered and can be tested.

make: various, see details
built: 2006/2007 – installed 2007
capacity: up to 5.500 bph
container handling: pet, 8 oz to 2.0 liters
condition: good
running hours: 16500 hrs
power / voltage: 460 v / 60 hz

equipment included:

- bohm pressure vessel – 900 liters – type 2360
- aquafine uv desinfection unit
- kaeser air dryer + 40 bar air compressor – thp212 + csdx 137, 3580 l/min, 75.0 kw
- barter co2 filter – ebco 1500
- ingersoll rand – 7bar compressor
- 2x lmi dosing pumps and meters
- evapco cooling tower – pmc-220e
- membrafe amoniak membrame cooling – rl500-3
- 2x vilter amoniak compressors – zl46
- 1x pentair water filter
- pumps & filters (various)
- kosme preform hopper
- kosme preform elevating conveyor pfa 1500, 0.37 kw, 50 hz
- kosme preform alignment infeed conveyor
- kosme ksb 4l – linear blow moulder – 4 heads, 68 kw, 50 hz
- mta chiller for kosme blow moulder, 6 bar, 11.6 kw, 220 v / 60 hz
- mesal air conveyors, linear curves, 9 motors
- mesal manual outfeed airconveyor to labeler (height adjustment)
- trine wrap around labeler + glue pump
- mesal manual airconveyor infeed from labeler (height adjustment)
- mesal mixer for csd
- amoniak cooler mesal + alfa laval phe (m10-bwfm, 10 bar, 34.89 l)
- mesal rinser,filler,capper (tribloc 30/30/10) – manual infeed of caps
- mesal bottle conveyors + ss conveyor belts
- visial lightbox full bottle inspection (manual)
- control panel for conveyors + filler danfoss drives
- vitz packers, mechanical wrap only packer for 12 packs + heat tunnel, ht 74 de
- outfeed conveyor (manual palletizing)
- optional = 2x ss sugar dissolving tanks
- optional = 2x ss storage buffer tanks    COMPLETE PET BOTTLE FILLING LINE 5.500 BPH THIS COMPLETE LINE HAS BEEN BUILT IN 2006 AND 2007 – INSTALLED IN 2007 AND HAS BEEN TAKEN OUT OF SERVICE IN 2016. THE LINE HAS FILLING NON CARBONATED SOFT DRINKS IN PET BOTTLES CAP PCO 28 MM. FREQUENT MAINTENANCE IS STILL TAKING PLACE (GREASING AND STARTUP / TEST RUNS). IT IS COMPLETELY INSTALLED AND IN EXCELLENT CONDITION. DRY END OF THE LINE IS BEING USED FOR REPACKING PURPOSE. LINE HAS RUN 3 DIFFERENT BOTTLE FORMATS (BIGGEST 2.0 LITERS). SPARE PARTS (LIMITED) ARE AVAILABLE, ALL DOCUMENTATION IS AVAILABLE. THE LINE IS IN GOOD CONDITION, INSTALLED AND POWERED AND CAN BE TESTED. MAKE: VARIOUS, SEE DETAILS BUILT: 2006/2007 – INSTALLED 2007 CAPACITY: UP TO 5.500 BPH CONTAINER HANDLING: PET, 8 OZ TO 2.0 LITERS CONDITION: GOOD RUNNING HOURS: 16500 HRS POWER / VOLTAGE: 460 V / 60 HZ EQUIPMENT INCLUDED: - BOHM PRESSURE VESSEL – 900 LITERS – TYPE 2360 - AQUAFINE UV DESINFECTION UNIT - KAESER AIR DRYER + 40 BAR AIR COMPRESSOR – THP212 + CSDX 137, 3580 L/MIN, 75.0 KW - BARTER CO2 FILTER – EBCO 1500 - INGERSOLL RAND – 7BAR COMPRESSOR - 2X LMI DOSING PUMPS AND METERS - EVAPCO COOLING TOWER – PMC-220E - MEMBRAFE AMONIAK MEMBRAME COOLING – RL500-3 - 2X VILTER AMONIAK COMPRESSORS – ZL46 - 1X PENTAIR WATER FILTER - PUMPS & FILTERS (VARIOUS) - KOSME PREFORM HOPPER - KOSME PREFORM ELEVATING CONVEYOR PFA 1500, 0.37 KW, 50 HZ - KOSME PREFORM ALIGNMENT INFEED CONVEYOR - KOSME KSB 4L – LINEAR BLOW MOULDER – 4 HEADS, 68 KW, 50 HZ - MTA CHILLER FOR KOSME BLOW MOULDER, 6 BAR, 11.6 KW, 220 V / 60 HZ - MESAL AIR CONVEYORS, LINEAR CURVES, 9 MOTORS - MESAL MANUAL OUTFEED AIRCONVEYOR TO LABELER (HEIGHT ADJUSTMENT) - TRINE WRAP AROUND LABELER + GLUE PUMP - MESAL MANUAL AIRCONVEYOR INFEED FROM LABELER (HEIGHT ADJUSTMENT) - MESAL MIXER FOR CSD - AMONIAK COOLER MESAL + ALFA LAVAL PHE (M10-BWFM, 10 BAR, 34.89 L) - MESAL RINSER,FILLER,CAPPER (TRIBLOC 30/30/10) – MANUAL INFEED OF CAPS - MESAL BOTTLE CONVEYORS + SS CONVEYOR BELTS - VISIAL LIGHTBOX FULL BOTTLE INSPECTION (MANUAL) - CONTROL PANEL FOR CONVEYORS + FILLER DANFOSS DRIVES - VITZ PACKERS, MECHANICAL WRAP ONLY PACKER FOR 12 PACKS + HEAT TUNNEL, HT 74 DE - OUTFEED CONVEYOR (MANUAL PALLETIZING) - OPTIONAL = 2X SS SUGAR DISSOLVING TANKS - OPTIONAL = 2X SS STORAGE BUFFER TANKS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-grinding length:   1000 mm<br/>grinding width:    250 mm<br/>workpiece height:        mm<br/>--------------------------------------------------:  <br/>technische daten:  <br/>- max. grinding length:   1000 mm<br/>- max. grinding breadth:    250 mm<br/>- segmentkopf durchmesser:    400 mm<br/>- table speed:      0 m/min<br/>- .                                to:     35 m/min<br/>- grinding spindle required power:   18.5 kw<br/>heavy duty grinder with motorized tiliting table.<br/>grinding spindle is equipped with cbn- grinding wheel.<br/>no cooling equipment.<br/><br/><br/><br/><br/> GRINDING LENGTH: 1000 MM
GRINDING WIDTH: 250 MM
WORKPIECE HEIGHT: MM
--------------------------------------------------:
TECHNISCHE DATEN:
- MAX. GRINDING LENGTH: 1000 MM
- MAX. GRINDING BREADTH: 250 MM
- SEGMENTKOPF DURCHMESSER: 400 MM
- TABLE SPEED: 0 M/MIN
- . TO: 35 M/MIN
- GRINDING SPINDLE REQUIRED POWER: 18.5 KW
HEAVY DUTY GRINDER WITH MOTORIZED TILITING TABLE.
GRINDING SPINDLE IS EQUIPPED WITH CBN- GRINDING WHEEL.
NO COOLING EQUIPMENT.




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-pet bottle filling line sig simonazzi 23 000 bph - 2002/2013
 
this line is a complete pet line for beer, carbonated and non carbonated drinks. the line iwas delivered in 2002 by sig simonazzi and it was upgraded in 2011/2013. currently line is installed and powered and it is designed for 1.0 & 1.5 liter with capacity of 23 000 bph.
 
main characteristics
- manufactured in year 2002 upgrade 2011/2013
- capacity 23 000 bph in 1.0 and 1.5 l containers
- total operating hours 38500
- equipment is in very good condition, still installed but ready for immediate relocation.

list of main equipment:
1. pet stretch blow machine blomax 16 sig, (operating hours 38217) with
a. sig box tipper for emptying preform containers
b. preform feeding elevator vzt-2510 with a hopper
c. preform orientator - feeding system
d. water chiller riedel pc 1000 refrigerant r407c
2. blower automatic lubrication system pet 2, year 2009
3. air conveyor system
4. beer analyzer year 2005
5. flash pasteurizer alfa-laval 400 hl/h with vt 40 bc 25 heat exhanger and buffer tank
6. block rinser simonazzi 60 p113 with 60 rinsing heads
7. filling block sig simonazzi tvr eurostar 2000 year 2002, upgrade 2010&2011with arol cap feeding system
8. automatic cip line for filling block
9. filling inspector
10. labeling machine krones prontomatic
11. bottles conveyor, simonazzi
12. laser marker videojet vj3430 year 2010
13. shrink packer smi sk 600t, year 2002 upgrade 2013
14. conveyor system simonazzi for packages
15. printer applicator stay tr602 solv mektek, year 2009, upgrade 2013 (two step marking the front and back)
16. printer-applicator tv102 mectec year2012
17. palletizer simonazzi with pack orienting system
18. pallet stretch wrapping machine robopak genesis, year 2002 upgrade 2012
19. label applicator domino collamat, year 2011   PET BOTTLE FILLING LINE SIG SIMONAZZI 23 000 BPH - 2002/2013 THIS LINE IS A COMPLETE PET LINE FOR BEER, CARBONATED AND NON CARBONATED DRINKS. THE LINE IWAS DELIVERED IN 2002 BY SIG SIMONAZZI AND IT WAS UPGRADED IN 2011/2013. CURRENTLY LINE IS INSTALLED AND POWERED AND IT IS DESIGNED FOR 1.0 & 1.5 LITER WITH CAPACITY OF 23 000 BPH. MAIN CHARACTERISTICS - MANUFACTURED IN YEAR 2002 UPGRADE 2011/2013 - CAPACITY 23 000 BPH IN 1.0 AND 1.5 L CONTAINERS - TOTAL OPERATING HOURS 38500 - EQUIPMENT IS IN VERY GOOD CONDITION, STILL INSTALLED BUT READY FOR IMMEDIATE RELOCATION. LIST OF MAIN EQUIPMENT: 1. PET STRETCH BLOW MACHINE BLOMAX 16 SIG, (OPERATING HOURS 38217) WITH A. SIG BOX TIPPER FOR EMPTYING PREFORM CONTAINERS B. PREFORM FEEDING ELEVATOR VZT-2510 WITH A HOPPER C. PREFORM ORIENTATOR - FEEDING SYSTEM D. WATER CHILLER RIEDEL PC 1000 REFRIGERANT R407C 2. BLOWER AUTOMATIC LUBRICATION SYSTEM PET 2, YEAR 2009 3. AIR CONVEYOR SYSTEM 4. BEER ANALYZER YEAR 2005 5. FLASH PASTEURIZER ALFA-LAVAL 400 HL/H WITH VT 40 BC 25 HEAT EXHANGER AND BUFFER TANK 6. BLOCK RINSER SIMONAZZI 60 P113 WITH 60 RINSING HEADS 7. FILLING BLOCK SIG SIMONAZZI TVR EUROSTAR 2000 YEAR 2002, UPGRADE 2010&2011WITH AROL CAP FEEDING SYSTEM 8. AUTOMATIC CIP LINE FOR FILLING BLOCK 9. FILLING INSPECTOR 10. LABELING MACHINE KRONES PRONTOMATIC 11. BOTTLES CONVEYOR, SIMONAZZI 12. LASER MARKER VIDEOJET VJ3430 YEAR 2010 13. SHRINK PACKER SMI SK 600T, YEAR 2002 UPGRADE 2013 14. CONVEYOR SYSTEM SIMONAZZI FOR PACKAGES 15. PRINTER APPLICATOR STAY TR602 SOLV MEKTEK, YEAR 2009, UPGRADE 2013 (TWO STEP MARKING THE FRONT AND BACK) 16. PRINTER-APPLICATOR TV102 MECTEC YEAR2012 17. PALLETIZER SIMONAZZI WITH PACK ORIENTING SYSTEM 18. PALLET STRETCH WRAPPING MACHINE ROBOPAK GENESIS, YEAR 2002 UPGRADE 2012 19. LABEL APPLICATOR DOMINO COLLAMAT, YEAR 2011
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-manual for drilling-machine reform sb50 from 1995<br>and for radial-drill reform rb50/12 and rb50/16 from 1996 MANUAL FOR DRILLING-MACHINE REFORM SB50 FROM 1995
AND FOR RADIAL-DRILL REFORM RB50/12 AND RB50/16 FROM 1996
Vendedor: Peter Jüttermann Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-pet bottle filling line krones 18 000 bph

this is a complete pet bottle filling line, delivered by krones in year 2003 and used for beer filling
in 1.0 and 1.5 liter pet bottles. the nominal line capacity is 18 000 bph with 1.5 liter bottles. the was in operation till summer 2016 and is still installed, good condition and can be tested.

list of main equipment

1. blow molding machine krones contiform s16, k786-043 with:
- prefom box tipper md3 and feeding system
- chiller klc 74t, kkt-kraus, refrigerant r407c
- 38 gram preform for 1.0 litert pet, capacity 22400 bph
- 40.1 gram preform for 1.5 liter pet, capacity 18 000 bph.
2. air conveyor line krones approx 100 meters.
3. filler monoblock krones mecafill k562-253, year 1999 with
4. full bottle level inspector bbull.
5. flash pasteurizer alfa laval potok with a buffer tank
6. full bottle conveyor system with accumulation table
7. labeler krones starmatic.
8. labeler krones contiroll year 2005.
9. full bottle conveyor system with accumulation tables
10. shrink wrapper smi sk 800.
11. palletizer kettner pressant 1n, 1999.
12. pallet stretch wrapper helix hs40
13. control and mcc cabinets.   PET BOTTLE FILLING LINE KRONES 18 000 BPH THIS IS A COMPLETE PET BOTTLE FILLING LINE, DELIVERED BY KRONES IN YEAR 2003 AND USED FOR BEER FILLING IN 1.0 AND 1.5 LITER PET BOTTLES. THE NOMINAL LINE CAPACITY IS 18 000 BPH WITH 1.5 LITER BOTTLES. THE WAS IN OPERATION TILL SUMMER 2016 AND IS STILL INSTALLED, GOOD CONDITION AND CAN BE TESTED. LIST OF MAIN EQUIPMENT 1. BLOW MOLDING MACHINE KRONES CONTIFORM S16, K786-043 WITH: - PREFOM BOX TIPPER MD3 AND FEEDING SYSTEM - CHILLER KLC 74T, KKT-KRAUS, REFRIGERANT R407C - 38 GRAM PREFORM FOR 1.0 LITERT PET, CAPACITY 22400 BPH - 40.1 GRAM PREFORM FOR 1.5 LITER PET, CAPACITY 18 000 BPH. 2. AIR CONVEYOR LINE KRONES APPROX 100 METERS. 3. FILLER MONOBLOCK KRONES MECAFILL K562-253, YEAR 1999 WITH 4. FULL BOTTLE LEVEL INSPECTOR BBULL. 5. FLASH PASTEURIZER ALFA LAVAL POTOK WITH A BUFFER TANK 6. FULL BOTTLE CONVEYOR SYSTEM WITH ACCUMULATION TABLE 7. LABELER KRONES STARMATIC. 8. LABELER KRONES CONTIROLL YEAR 2005. 9. FULL BOTTLE CONVEYOR SYSTEM WITH ACCUMULATION TABLES 10. SHRINK WRAPPER SMI SK 800. 11. PALLETIZER KETTNER PRESSANT 1N, 1999. 12. PALLET STRETCH WRAPPER HELIX HS40 13. CONTROL AND MCC CABINETS.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-barrel diameter: 254 mm<br/>max. barrel capacity: 40 dm³<br/>ram stroke: 800 mm<br/>working pressure: 250 bar<br/>throughput:  kg/h<br/><br/><br/><br/><br/> BARREL DIAMETER: 254 MM
MAX. BARREL CAPACITY: 40 DM³
RAM STROKE: 800 MM
WORKING PRESSURE: 250 BAR
THROUGHPUT: KG/H




Vendedor: MEB Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine for pet preforms, husky g 600 pet, year 2000
 
this is a complete preform production line from granule feeding to readymade pet bottle preform conveyor. the equipment was made by husky injection molding systems s. a. (spain) on year 2000 and started to manufacture in 2001. the human-machine interface is an ibm-compatible pc. the nominal capacity of 19000 preform with weight 44 gram for 1.5-liter pet bottles. neck format is light bpf . equipment is on good condition and ready for delivery.
 
the delivery includes:
- injection molding machine g 600 pet p120/130 e 140 husky
- dispenser of the dye mdt3/c piovan
- air conditioner piovan
- water circulation pump gp 1art 1x37 piovan
- vacuum pump f316 / 2 piovan
- granulate desiccant ds 531 piovan
- cooler rpn 1500 piovan
- in / out conveyors
- control instrumentation and control box
 
manufacturer: husky injection molding systems s. a.
manufacturers type: g 600 pet p/120/130 e140
manufacturer year: 2000
capacity: 19000 preforms/hour
number of molds: 96
current preform size: 44 grams for 1.5-liter pet
clamping force: 600 tons
clamping cycle time: 15 seconds
current neck format: light bpf   INJECTION MOLDING MACHINE FOR PET PREFORMS, HUSKY G 600 PET, YEAR 2000 THIS IS A COMPLETE PREFORM PRODUCTION LINE FROM GRANULE FEEDING TO READYMADE PET BOTTLE PREFORM CONVEYOR. THE EQUIPMENT WAS MADE BY HUSKY INJECTION MOLDING SYSTEMS S. A. (SPAIN) ON YEAR 2000 AND STARTED TO MANUFACTURE IN 2001. THE HUMAN-MACHINE INTERFACE IS AN IBM-COMPATIBLE PC. THE NOMINAL CAPACITY OF 19000 PREFORM WITH WEIGHT 44 GRAM FOR 1.5-LITER PET BOTTLES. NECK FORMAT IS LIGHT BPF . EQUIPMENT IS ON GOOD CONDITION AND READY FOR DELIVERY. THE DELIVERY INCLUDES: - INJECTION MOLDING MACHINE G 600 PET P120/130 E 140 HUSKY - DISPENSER OF THE DYE MDT3/C PIOVAN - AIR CONDITIONER PIOVAN - WATER CIRCULATION PUMP GP 1ART 1X37 PIOVAN - VACUUM PUMP F316 / 2 PIOVAN - GRANULATE DESICCANT DS 531 PIOVAN - COOLER RPN 1500 PIOVAN - IN / OUT CONVEYORS - CONTROL INSTRUMENTATION AND CONTROL BOX MANUFACTURER: HUSKY INJECTION MOLDING SYSTEMS S. A. MANUFACTURERS TYPE: G 600 PET P/120/130 E140 MANUFACTURER YEAR: 2000 CAPACITY: 19000 PREFORMS/HOUR NUMBER OF MOLDS: 96 CURRENT PREFORM SIZE: 44 GRAMS FOR 1.5-LITER PET CLAMPING FORCE: 600 TONS CLAMPING CYCLE TIME: 15 SECONDS CURRENT NECK FORMAT: LIGHT BPF
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-including preform magazin and preform lift.<br/> <br/>id5415 INCLUDING PREFORM MAGAZIN AND PREFORM LIFT.

ID5415
Vendedor: Seegräber GmbH
Año de construcción: usado
Ubicación: Land-complete pet stretch blow station with blomax 16 serie iii

manufacturer sig corpoplast
manufacturer's type blomax 16, series iii
made in year 2005
capacity 22 000 bph
application stretch blow molding machine
neck standard pco 1880 - 28 mm
condition used - very good
container size (suitable)from 0.5 to 2.5 liters
air compressor atelier francois ce 68a
discharge air pressure 40 bar
fad 35 m3/h
preform feeding station simonazzi

this blomax 16, series iii, pet bottle blowing system is in excellent condition and includes preform feeding system, chiller and atelier francois 40 bar air compressor. it is commissioned on 2005 and it is still installed and can be tested. it has been regularly serviced strict in accordance with the manufacturer's guidelines. this is complete system for pet bottle blowing at capacity 22 000 bph, it has been making 1.5 liter and 2.5 liter bottles but it is suitable for bottles from 0.5 liters and 2.0 liters. it has currently neck standard pco 1880 - 28 mm   COMPLETE PET STRETCH BLOW STATION WITH BLOMAX 16 SERIE III MANUFACTURER SIG CORPOPLAST MANUFACTURER'S TYPE BLOMAX 16, SERIES III MADE IN YEAR 2005 CAPACITY 22 000 BPH APPLICATION STRETCH BLOW MOLDING MACHINE NECK STANDARD PCO 1880 - 28 MM CONDITION USED - VERY GOOD CONTAINER SIZE (SUITABLE)FROM 0.5 TO 2.5 LITERS AIR COMPRESSOR ATELIER FRANCOIS CE 68A DISCHARGE AIR PRESSURE 40 BAR FAD 35 M3/H PREFORM FEEDING STATION SIMONAZZI THIS BLOMAX 16, SERIES III, PET BOTTLE BLOWING SYSTEM IS IN EXCELLENT CONDITION AND INCLUDES PREFORM FEEDING SYSTEM, CHILLER AND ATELIER FRANCOIS 40 BAR AIR COMPRESSOR. IT IS COMMISSIONED ON 2005 AND IT IS STILL INSTALLED AND CAN BE TESTED. IT HAS BEEN REGULARLY SERVICED STRICT IN ACCORDANCE WITH THE MANUFACTURER'S GUIDELINES. THIS IS COMPLETE SYSTEM FOR PET BOTTLE BLOWING AT CAPACITY 22 000 BPH, IT HAS BEEN MAKING 1.5 LITER AND 2.5 LITER BOTTLES BUT IT IS SUITABLE FOR BOTTLES FROM 0.5 LITERS AND 2.0 LITERS. IT HAS CURRENTLY NECK STANDARD PCO 1880 - 28 MM
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-bowing machine. completly overhault by sidel in 2006. <br/>including preform magazin.<br/>compressor, cooling, moulds optionally <br/>id5455 BOWING MACHINE. COMPLETLY OVERHAULT BY SIDEL IN 2006.
INCLUDING PREFORM MAGAZIN.
COMPRESSOR, COOLING, MOULDS OPTIONALLY
ID5455
Vendedor: Seegräber GmbH
Año de construcción: usado
Ubicación: Land-pet bottle filling line 6 000 bph
 
this is a complete pet bottle filling line used for beer filling in 2,0 and 2.5 liter pet bottles with capacity of 6000 bph (2.5 l). the line is still installed and powered. the line was installed in 2002 and reconfigured in 2011/2012 with new stand alone rinser, labeling machine and pallet stretch wrapper
 
main equipment included in this line:
 
item 1: pet blower sidel sbo 08 year 2002
- 8 cavities for 2.0 and 2.5 liter bottles
- capacity 9000 bph (2.0 l)
- preform feeding system and a chiller
item 2: air conveyor system
item 3: stand alone rinsing machine ave, capacity 6500 bph, year 2012
item 4: plate type flash pasteurizer alfa laval, year 2002
- type flexiterm f-60-12
- heat exchanger front 8 frh, comes with a buffer tank
- capacity (beer) 120 hl/h
item 5: filler capper cbi o&h50/10, upgraded in 2002 with
- 50 volumetric filling valves
- 10 arol capping heads
- capacity 6000 bph in 2.0 liter
item 6: full bottle inspector heuft basic, year 2002, capacity 12000 bph
item 7: aci bottle dryer
item 8: labeling machine krones solomodul, 2 station (neck and body) plastic hot glue labeler year
2011, capacity 7000 bph
item 9: label inspector krones checkmat - 707 bs, year 2007, capacity 12000 bph
item 10: shrink wrapper dimac stor p30, year 2002
item 11: robopack pallet wrapper   PET BOTTLE FILLING LINE 6 000 BPH THIS IS A COMPLETE PET BOTTLE FILLING LINE USED FOR BEER FILLING IN 2,0 AND 2.5 LITER PET BOTTLES WITH CAPACITY OF 6000 BPH (2.5 L). THE LINE IS STILL INSTALLED AND POWERED. THE LINE WAS INSTALLED IN 2002 AND RECONFIGURED IN 2011/2012 WITH NEW STAND ALONE RINSER, LABELING MACHINE AND PALLET STRETCH WRAPPER MAIN EQUIPMENT INCLUDED IN THIS LINE: ITEM 1: PET BLOWER SIDEL SBO 08 YEAR 2002 - 8 CAVITIES FOR 2.0 AND 2.5 LITER BOTTLES - CAPACITY 9000 BPH (2.0 L) - PREFORM FEEDING SYSTEM AND A CHILLER ITEM 2: AIR CONVEYOR SYSTEM ITEM 3: STAND ALONE RINSING MACHINE AVE, CAPACITY 6500 BPH, YEAR 2012 ITEM 4: PLATE TYPE FLASH PASTEURIZER ALFA LAVAL, YEAR 2002 - TYPE FLEXITERM F-60-12 - HEAT EXCHANGER FRONT 8 FRH, COMES WITH A BUFFER TANK - CAPACITY (BEER) 120 HL/H ITEM 5: FILLER CAPPER CBI O&H50/10, UPGRADED IN 2002 WITH - 50 VOLUMETRIC FILLING VALVES - 10 AROL CAPPING HEADS - CAPACITY 6000 BPH IN 2.0 LITER ITEM 6: FULL BOTTLE INSPECTOR HEUFT BASIC, YEAR 2002, CAPACITY 12000 BPH ITEM 7: ACI BOTTLE DRYER ITEM 8: LABELING MACHINE KRONES SOLOMODUL, 2 STATION (NECK AND BODY) PLASTIC HOT GLUE LABELER YEAR 2011, CAPACITY 7000 BPH ITEM 9: LABEL INSPECTOR KRONES CHECKMAT - 707 BS, YEAR 2007, CAPACITY 12000 BPH ITEM 10: SHRINK WRAPPER DIMAC STOR P30, YEAR 2002 ITEM 11: ROBOPACK PALLET WRAPPER
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-grinding length: 3500 mm<br/>grinding width: 350 mm<br/>workpiece height: 250 mm<br/>total power requirement: 60 kw<br/>weight of the machine ca.: 14 t<br/>dimensions of the machine ca.: 7800 x 1900 x 3000 m<br/>condition very good, still in the factory under power.<br/><br/>cnc control siemens 840 d<br/>magnetic table 3500 x 350 mm, fixed<br/>grinding height 250 mm<br/>dresser on table<br/>accuracy 0.01 mm parallelism<br/>grinding motor 22 kw / 2910 1 / min.<br/>grinding wheel 450 x 80 x 203 mm<br/>table feed to 30 m / min. infinitely variable<br/><br/><br/><br/><br/> GRINDING LENGTH: 3500 MM
GRINDING WIDTH: 350 MM
WORKPIECE HEIGHT: 250 MM
TOTAL POWER REQUIREMENT: 60 KW
WEIGHT OF THE MACHINE CA.: 14 T
DIMENSIONS OF THE MACHINE CA.: 7800 X 1900 X 3000 M
CONDITION VERY GOOD, STILL IN THE FACTORY UNDER POWER.

CNC CONTROL SIEMENS 840 D
MAGNETIC TABLE 3500 X 350 MM, FIXED
GRINDING HEIGHT 250 MM
DRESSER ON TABLE
ACCURACY 0.01 MM PARALLELISM
GRINDING MOTOR 22 KW / 2910 1 / MIN.
GRINDING WHEEL 450 X 80 X 203 MM
TABLE FEED TO 30 M / MIN. INFINITELY VARIABLE




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-the machine can check thermoplastics preforms at neck sizes 26, 28, 38 and 43 mm
and a height of 80 to 160 mm
maximum capacity: 18 pieces/min. THE MACHINE CAN CHECK THERMOPLASTICS PREFORMS AT NECK SIZES 26, 28, 38 AND 43 MM AND A HEIGHT OF 80 TO 160 MM MAXIMUM CAPACITY: 18 PIECES/MIN.
Vendedor: MachinePoint
Año de construcción: usado
Ubicación: Land-grinding length: 6000 mm<br/>grinding width: 800 mm<br/>workpiece height: 320 mm<br/>control: fanuc 21i-m <br/>magnetic plate size: 6000 x 800 mm<br/>segment head diameter: 1000 mm<br/>table feed (infinitely stepless variable): 0,05 - 35 m/min<br/>grinding motor: 135 kw<br/>total power requirement: 165 kw<br/>weight of the machine ca.: 25,0 t<br/>dimensions of the machine ca.: 11,3 x 3,5 x 3,5 m<br/>new segment head in 2012<br/>cable carrier with cables recently generally overhauled !  <br/><br/>working hours: 56693 h<br/><br/>magnet table: 6000 x 800 mm (fixed)<br/>segment-head-diameter 1000 mm<br/>number of segments 18 pieces<br/>size of segments 103/94 x 38 x 200 mm<br/><br/>at present still in production, in good condition.<br/><br/>without coolant tank. machine was connected to a central coolant unit.<br/><br/>a separate central coolant unit, built 2016, can be purchased separately.<br/><br/><br/><br/><br/> GRINDING LENGTH: 6000 MM
GRINDING WIDTH: 800 MM
WORKPIECE HEIGHT: 320 MM
CONTROL: FANUC 21I-M
MAGNETIC PLATE SIZE: 6000 X 800 MM
SEGMENT HEAD DIAMETER: 1000 MM
TABLE FEED (INFINITELY STEPLESS VARIABLE): 0,05 - 35 M/MIN
GRINDING MOTOR: 135 KW
TOTAL POWER REQUIREMENT: 165 KW
WEIGHT OF THE MACHINE CA.: 25,0 T
DIMENSIONS OF THE MACHINE CA.: 11,3 X 3,5 X 3,5 M
NEW SEGMENT HEAD IN 2012
CABLE CARRIER WITH CABLES RECENTLY GENERALLY OVERHAULED !

WORKING HOURS: 56693 H

MAGNET TABLE: 6000 X 800 MM (FIXED)
SEGMENT-HEAD-DIAMETER 1000 MM
NUMBER OF SEGMENTS 18 PIECES
SIZE OF SEGMENTS 103/94 X 38 X 200 MM

AT PRESENT STILL IN PRODUCTION, IN GOOD CONDITION.

WITHOUT COOLANT TANK. MACHINE WAS CONNECTED TO A CENTRAL COOLANT UNIT.

A SEPARATE CENTRAL COOLANT UNIT, BUILT 2016, CAN BE PURCHASED SEPARATELY.




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-ultra clean – aseptic filling line krones for pet bottles 24000 bph 
 
complete ultra clean filling line for carbonated and non-carbonated juices, soft drinks, cider, water made by krones and gea in 2010, operations started in 2013. filling, rinsing and capping compartment of the line is aseptic. the line has modern krones contiform bloc where blow molder is directly connected with ultra clean - aseptic filling bloc without air conveyor. process department is made by gea and it can produce various fully aseptic products and other beverages. packing department has very versatile krones variopac pro for shrink, shrink tray and carton boxing and a palletizer. equipment is in very well maintained and good condition. 
 
main characteristics 
 
manufacturer                                      krones and gea
manufacturing year                             2010 – installed in 2013 
filling process                                     ultra clean – aseptic 
suitable for                                         carbonated and non-carbonated drinks 
current product                                  apple juice with water and co2 
currently used container sizes            pet 0.5 ltr, 1.0 ltr and 1.5 ltr 
neck format                                        pco 1810 – 28 mm
capacity                                              24000bph for 0.5 ltr  and 18000bph for 1.5 ltr 
control plcs                                      siemens simatic s7-series 
ultra clean disinfectant                     c2h4o3 (paracetic acid)
 
list of main equipment 
 
krones varioclean fully automatic cip system  
gea processing plant with flash pasteurizer, mixer, carbonator, degasser and tanks 
preform kipper and feeding conveyors 
preform feeding system krones contifeed 
blow moulder krones contiform s12m 
ultra clean krones volumetric rinser, filler and capper block  
ultra clean krones variodos filler block cleaning system kb 59091 
filling and closing level inspector krones checkmat 731 
bottle dryer krones power dry 15  
labelling machine krones contiroll opp label with hot glue 
date coder domino (laser) 
label inspector krones checkmat 731 
shrink – tray (carton) packer krones variopro 
handle applicator twin pack 
pack coding leisinger jet 3 (ink) 
palletizer krones modulpal 

  ULTRA CLEAN – ASEPTIC FILLING LINE KRONES FOR PET BOTTLES 24000 BPH COMPLETE ULTRA CLEAN FILLING LINE FOR CARBONATED AND NON-CARBONATED JUICES, SOFT DRINKS, CIDER, WATER MADE BY KRONES AND GEA IN 2010, OPERATIONS STARTED IN 2013. FILLING, RINSING AND CAPPING COMPARTMENT OF THE LINE IS ASEPTIC. THE LINE HAS MODERN KRONES CONTIFORM BLOC WHERE BLOW MOLDER IS DIRECTLY CONNECTED WITH ULTRA CLEAN - ASEPTIC FILLING BLOC WITHOUT AIR CONVEYOR. PROCESS DEPARTMENT IS MADE BY GEA AND IT CAN PRODUCE VARIOUS FULLY ASEPTIC PRODUCTS AND OTHER BEVERAGES. PACKING DEPARTMENT HAS VERY VERSATILE KRONES VARIOPAC PRO FOR SHRINK, SHRINK TRAY AND CARTON BOXING AND A PALLETIZER. EQUIPMENT IS IN VERY WELL MAINTAINED AND GOOD CONDITION. MAIN CHARACTERISTICS MANUFACTURER KRONES AND GEA MANUFACTURING YEAR 2010 – INSTALLED IN 2013 FILLING PROCESS ULTRA CLEAN – ASEPTIC SUITABLE FOR CARBONATED AND NON-CARBONATED DRINKS CURRENT PRODUCT APPLE JUICE WITH WATER AND CO2 CURRENTLY USED CONTAINER SIZES PET 0.5 LTR, 1.0 LTR AND 1.5 LTR NECK FORMAT PCO 1810 – 28 MM CAPACITY 24000BPH FOR 0.5 LTR AND 18000BPH FOR 1.5 LTR CONTROL PLCS SIEMENS SIMATIC S7-SERIES ULTRA CLEAN DISINFECTANT C2H4O3 (PARACETIC ACID) LIST OF MAIN EQUIPMENT KRONES VARIOCLEAN FULLY AUTOMATIC CIP SYSTEM GEA PROCESSING PLANT WITH FLASH PASTEURIZER, MIXER, CARBONATOR, DEGASSER AND TANKS PREFORM KIPPER AND FEEDING CONVEYORS PREFORM FEEDING SYSTEM KRONES CONTIFEED BLOW MOULDER KRONES CONTIFORM S12M ULTRA CLEAN KRONES VOLUMETRIC RINSER, FILLER AND CAPPER BLOCK ULTRA CLEAN KRONES VARIODOS FILLER BLOCK CLEANING SYSTEM KB 59091 FILLING AND CLOSING LEVEL INSPECTOR KRONES CHECKMAT 731 BOTTLE DRYER KRONES POWER DRY 15 LABELLING MACHINE KRONES CONTIROLL OPP LABEL WITH HOT GLUE DATE CODER DOMINO (LASER) LABEL INSPECTOR KRONES CHECKMAT 731 SHRINK – TRAY (CARTON) PACKER KRONES VARIOPRO HANDLE APPLICATOR TWIN PACK PACK CODING LEISINGER JET 3 (INK) PALLETIZER KRONES MODULPAL
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-grinding length: 2100 mm<br/>grinding width: 200 mm<br/>workpiece height: 160 mm<br/>grinding wheel diameter: 200 mm<br/>speeds of grinding spindle: 1450 u/min<br/>passage width:  mm<br/>passage:  mm<br/>magnetic plate size: 2100 mm<br/>feed:  m/min<br/>power capacity - grinding motor: 7 kw<br/>voltage: 400 v<br/>control: sinumerik 805 <br/>total power requirement: 9 kw<br/>weight of the machine ca.: 2,0 t<br/>- s/n:<br/>- cnc-control siemens sinumerik 805<br/>- machine has fixed magnetic chuck<br/>- coolant equipment<br/><br/><br/><br/><br/> GRINDING LENGTH: 2100 MM
GRINDING WIDTH: 200 MM
WORKPIECE HEIGHT: 160 MM
GRINDING WHEEL DIAMETER: 200 MM
SPEEDS OF GRINDING SPINDLE: 1450 U/MIN
PASSAGE WIDTH: MM
PASSAGE: MM
MAGNETIC PLATE SIZE: 2100 MM
FEED: M/MIN
POWER CAPACITY - GRINDING MOTOR: 7 KW
VOLTAGE: 400 V
CONTROL: SINUMERIK 805
TOTAL POWER REQUIREMENT: 9 KW
WEIGHT OF THE MACHINE CA.: 2,0 T
- S/N:
- CNC-CONTROL SIEMENS SINUMERIK 805
- MACHINE HAS FIXED MAGNETIC CHUCK
- COOLANT EQUIPMENT




Vendedor: KIRCHGEORG Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-blow molder arcor multiblow 2 for pet bottles, 6000 bph 
 
excellent condition blow molder manufactured by german arcor ( today atlantic c gmbh) in 2012. this is a four cavity linear blow molder with preform feeding system and chiller for cavity cooling. it can produce bottle sizes from 0.5 liter to 2.5 liters and it has blow air recovery system for energy saving purpose. machine is equipment quality control and removal of insufficiently heated preforms. operation is made with a touch screen display with automatic adjustment of maintenance processes, diagnostics, as well as information on how to correct the errors. control plc is similar to siemens s 7 system. touch screen languages are english, german and russian. machine has been used only approx 4000 hours and it will come with a large spare part stock. four sets of mold frames and one set of pco 28 mm molds are included in the delivery. machine can be tested for serious buyers. 
 
technical data
 
manufacturer                          arcor gmbh 
manufacturing year                 2012 
model                                      multiblow 2 
capacity                                  6000 bph in 1.5 liter bottles
max bottle diameter                110 mm 
max bottle height                    340 mm 
max diameter of bottle mouth            42 mm 
number of molds                    4
number of heating modules   4
number of heating zones        8
installed heating capacity       64 kw  
machine weight                      5500 kg 
 
abcs://abc.youtube.com/watch?v=pv30j2go9ko
abcs://abc.youtube.com/watch?v=bwuwlie0any
abcs://abc.youtube.com/watch?v=v_ot3h0qh6q
 BLOW MOLDER ARCOR MULTIBLOW 2 FOR PET BOTTLES, 6000 BPH EXCELLENT CONDITION BLOW MOLDER MANUFACTURED BY GERMAN ARCOR ( TODAY ATLANTIC C GMBH) IN 2012. THIS IS A FOUR CAVITY LINEAR BLOW MOLDER WITH PREFORM FEEDING SYSTEM AND CHILLER FOR CAVITY COOLING. IT CAN PRODUCE BOTTLE SIZES FROM 0.5 LITER TO 2.5 LITERS AND IT HAS BLOW AIR RECOVERY SYSTEM FOR ENERGY SAVING PURPOSE. MACHINE IS EQUIPMENT QUALITY CONTROL AND REMOVAL OF INSUFFICIENTLY HEATED PREFORMS. OPERATION IS MADE WITH A TOUCH SCREEN DISPLAY WITH AUTOMATIC ADJUSTMENT OF MAINTENANCE PROCESSES, DIAGNOSTICS, AS WELL AS INFORMATION ON HOW TO CORRECT THE ERRORS. CONTROL PLC IS SIMILAR TO SIEMENS S 7 SYSTEM. TOUCH SCREEN LANGUAGES ARE ENGLISH, GERMAN AND RUSSIAN. MACHINE HAS BEEN USED ONLY APPROX 4000 HOURS AND IT WILL COME WITH A LARGE SPARE PART STOCK. FOUR SETS OF MOLD FRAMES AND ONE SET OF PCO 28 MM MOLDS ARE INCLUDED IN THE DELIVERY. MACHINE CAN BE TESTED FOR SERIOUS BUYERS. TECHNICAL DATA MANUFACTURER ARCOR GMBH MANUFACTURING YEAR 2012 MODEL MULTIBLOW 2 CAPACITY 6000 BPH IN 1.5 LITER BOTTLES MAX BOTTLE DIAMETER 110 MM MAX BOTTLE HEIGHT 340 MM MAX DIAMETER OF BOTTLE MOUTH 42 MM NUMBER OF MOLDS 4 NUMBER OF HEATING MODULES 4 NUMBER OF HEATING ZONES 8 INSTALLED HEATING CAPACITY 64 KW MACHINE WEIGHT 5500 KG ABCS://ABC.YOUTUBE.COM/WATCH?V=PV30J2GO9KO ABCS://ABC.YOUTUBE.COM/WATCH?V=BWUWLIE0ANY ABCS://ABC.YOUTUBE.COM/WATCH?V=V_OT3H0QH6Q
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-rotary table diameter: 1300 mm<br/>grinding height: 750 mm<br/>grinding head - power requirement:  kw<br/>max. workpiece diameter: 1500 mm<br/>workpiece height max.: 750 mm<br/>boring diameter: 1200 mm<br/>workpiece weight: 1200 kg<br/>table - swivable +/-: 3 °<br/>total power requirement: ca. 60 kw<br/>weight of the machine ca.: 16 t<br/>dimensions of the machine ca.: 5,5 x 3,5 x 3,2 m<br/>rotary table universal surface grinding machines with rotating cloumn and three<br/>grinding headstocks<br/>for internal-, external and face grinding.<br/>with<br/>- swiveling rotary table 3°<br/>- oil cooling<br/>partly overhauled by reform-rabenseifner<br/>- dro acu rite<br/>- new lubrictaion system for each head<br/>- change of wear parts etc<br/><br/>machine accuracy approx 10-1my<br/><br/><br/><br/><br/> ROTARY TABLE DIAMETER: 1300 MM
GRINDING HEIGHT: 750 MM
GRINDING HEAD - POWER REQUIREMENT: KW
MAX. WORKPIECE DIAMETER: 1500 MM
WORKPIECE HEIGHT MAX.: 750 MM
BORING DIAMETER: 1200 MM
WORKPIECE WEIGHT: 1200 KG
TABLE - SWIVABLE +/-: 3 °
TOTAL POWER REQUIREMENT: CA. 60 KW
WEIGHT OF THE MACHINE CA.: 16 T
DIMENSIONS OF THE MACHINE CA.: 5,5 X 3,5 X 3,2 M
ROTARY TABLE UNIVERSAL SURFACE GRINDING MACHINES WITH ROTATING CLOUMN AND THREE
GRINDING HEADSTOCKS
FOR INTERNAL-, EXTERNAL AND FACE GRINDING.
WITH
- SWIVELING ROTARY TABLE 3°
- OIL COOLING
PARTLY OVERHAULED BY REFORM-RABENSEIFNER
- DRO ACU RITE
- NEW LUBRICTAION SYSTEM FOR EACH HEAD
- CHANGE OF WEAR PARTS ETC

MACHINE ACCURACY APPROX 10-1MY




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-sidel sbo 16/16 series 1 pet blow-moulding machine for 16 molds. 
linear oven with 16 modules.
capacity 19,000 bph, for quick change shell molds. 
technical upgrade in 2016.
personalization 29/25.
machine complete with preform tipper, preform hopper and infeed.
machine in production till end of january 2019.
very well maintained machine.
available immediately.  SIDEL SBO 16/16 SERIES 1 PET BLOW-MOULDING MACHINE FOR 16 MOLDS. LINEAR OVEN WITH 16 MODULES. CAPACITY 19,000 BPH, FOR QUICK CHANGE SHELL MOLDS. TECHNICAL UPGRADE IN 2016. PERSONALIZATION 29/25. MACHINE COMPLETE WITH PREFORM TIPPER, PREFORM HOPPER AND INFEED. MACHINE IN PRODUCTION TILL END OF JANUARY 2019. VERY WELL MAINTAINED MACHINE. AVAILABLE IMMEDIATELY.
Vendedor: SEPROTEQ
Año de construcción: usado
Ubicación: Land-<br>pressure: 0 t<br>x - axis: 0 mm<br>y - axis: 0 mm<br>sheet thickness: 8,0 mm<br>positions atc: 0   <br><p>make eckold kf 665</p>
<p>type kf 665</p>
<p>year 90 er</p>
<p>kraftformer forming = 8 mm</p>
<p>ram = 0 - 80 mm</p>
<p>speed = 150 / 300 / 600-	model with potentiometer; limits reverse motion time -	foot switch for motorised adjustment ram -	1 machine for shrinking, stretching, doming, planishing, reforming, flattening, straightening</p>
<p>
PRESSURE: 0 T
X - AXIS: 0 MM
Y - AXIS: 0 MM
SHEET THICKNESS: 8,0 MM
POSITIONS ATC: 0  

MAKE ECKOLD KF 665

TYPE KF 665

YEAR 90 ER

KRAFTFORMER FORMING = 8 MM

RAM = 0 - 80 MM

SPEED = 150 / 300 / 600- MODEL WITH POTENTIOMETER; LIMITS REVERSE MOTION TIME - FOOT SWITCH FOR MOTORISED ADJUSTMENT RAM - 1 MACHINE FOR SHRINKING, STRETCHING, DOMING, PLANISHING, REFORMING, FLATTENING, STRAIGHTENING

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-sidel sbo 10/14 series 1 pet blow-moulding machine for 10 molds. 
linear oven with 14 modules.
capacity 12,000 bph for quick change shell molds. 
technical upgrade in 2016.
personalization 29/25.
machine complete with preform tipper, preform hopper and infeed.
machine disassembled and stored.
very well maintained machine.
see link for video 
machine immediately available  SIDEL SBO 10/14 SERIES 1 PET BLOW-MOULDING MACHINE FOR 10 MOLDS. LINEAR OVEN WITH 14 MODULES. CAPACITY 12,000 BPH FOR QUICK CHANGE SHELL MOLDS. TECHNICAL UPGRADE IN 2016. PERSONALIZATION 29/25. MACHINE COMPLETE WITH PREFORM TIPPER, PREFORM HOPPER AND INFEED. MACHINE DISASSEMBLED AND STORED. VERY WELL MAINTAINED MACHINE. SEE LINK FOR VIDEO MACHINE IMMEDIATELY AVAILABLE
Vendedor: SEPROTEQ
Año de construcción: usado
Ubicación: Land-sidel sbo 10/14 series 1 pet blow-moulding machine for 10 molds. 
linear oven with 14 modules.
last technical upgrade 2017.
capacity 12,000 bph for quick change shell molds. 
personalization 29/25.
machine complete with preform tipper, preform hopper and infeed.
machine disassembled and stored.
very well maintained machine.
see link for video 
machine immediately available.   SIDEL SBO 10/14 SERIES 1 PET BLOW-MOULDING MACHINE FOR 10 MOLDS. LINEAR OVEN WITH 14 MODULES. LAST TECHNICAL UPGRADE 2017. CAPACITY 12,000 BPH FOR QUICK CHANGE SHELL MOLDS. PERSONALIZATION 29/25. MACHINE COMPLETE WITH PREFORM TIPPER, PREFORM HOPPER AND INFEED. MACHINE DISASSEMBLED AND STORED. VERY WELL MAINTAINED MACHINE. SEE LINK FOR VIDEO MACHINE IMMEDIATELY AVAILABLE.
Vendedor: SEPROTEQ
Año de construcción: usado
Ubicación: Land-height of bridge: 750 mm HEIGHT OF BRIDGE: 750 MM
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-sidel sbo 6/6 series 1 pet blow-moulding machine for 6 molds. 
linear oven with 6 modules.
capacity 6,000 to 6,600 bph for quick change shell molds. 
personalization pco28.
machine complete with preform hopper and infeed.
machine disassembled and stored.
very well maintained machine. 
available immediately.  SIDEL SBO 6/6 SERIES 1 PET BLOW-MOULDING MACHINE FOR 6 MOLDS. LINEAR OVEN WITH 6 MODULES. CAPACITY 6,000 TO 6,600 BPH FOR QUICK CHANGE SHELL MOLDS. PERSONALIZATION PCO28. MACHINE COMPLETE WITH PREFORM HOPPER AND INFEED. MACHINE DISASSEMBLED AND STORED. VERY WELL MAINTAINED MACHINE. AVAILABLE IMMEDIATELY.
Vendedor: SEPROTEQ
Año de construcción: usado
Ubicación: Land-with turnable table WITH TURNABLE TABLE
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-reform a41 type 7 flat grinding machine flã¤schenschleifmaschine knife grinder tool grinder
bj. 1992 overhauled 2014
power consumption 35 kw
magnetic chuck 4100x400mm
loop scope ca 4100 x500mm
max workpiece height 200 mm
segment head diameter 550 mm
coolant system
weight ca: 7000x2000x2500mm REFORM A41 TYPE 7 FLAT GRINDING MACHINE FL&ATILDE;&CURREN;SCHENSCHLEIFMASCHINE KNIFE GRINDER TOOL GRINDER BJ. 1992 OVERHAULED 2014 POWER CONSUMPTION 35 KW MAGNETIC CHUCK 4100X400MM LOOP SCOPE CA 4100 X500MM MAX WORKPIECE HEIGHT 200 MM SEGMENT HEAD DIAMETER 550 MM COOLANT SYSTEM WEIGHT CA: 7000X2000X2500MM
Vendedor: Ralph Rosenthal Maschinenlager
Año de construcción: usado
Ubicación: Land-<br>grinding length (mm) 1500<br>grinding width (mm) 150<br>grinding height (mm) <br>wheel diameter (mm) <br>
GRINDING LENGTH (MM) 1500
GRINDING WIDTH (MM) 150
GRINDING HEIGHT (MM)
WHEEL DIAMETER (MM)
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-reform a60 type 7/zs flat grinding machine flã¤schenschleifmaschine knife grinder tool grinder
bj. 1990 reconditioned 2013
power 41 kw
swivel chuck 6100 * 300 mm
loop scope ca 6100 x400mm
max workpiece height 200 mm
coolant system
weight ca: 10200x2000x2500mm
 REFORM A60 TYPE 7/ZS FLAT GRINDING MACHINE FL&ATILDE;&CURREN;SCHENSCHLEIFMASCHINE KNIFE GRINDER TOOL GRINDER BJ. 1990 RECONDITIONED 2013 POWER 41 KW SWIVEL CHUCK 6100 * 300 MM LOOP SCOPE CA 6100 X400MM MAX WORKPIECE HEIGHT 200 MM COOLANT SYSTEM WEIGHT CA: 10200X2000X2500MM
Vendedor: Ralph Rosenthal Maschinenlager
Año de construcción: usado
Ubicación: Land-injection moulding machine for preforms
hypet 400 hpp 4.0 p120/120 ee 120
96 cavities
preform weight (max): 11,3 g
neck type: 29/25
 INJECTION MOULDING MACHINE FOR PREFORMS HYPET 400 HPP 4.0 P120/120 EE 120 96 CAVITIES PREFORM WEIGHT (MAX): 11,3 G NECK TYPE: 29/25
Vendedor: MachinePoint
Año de construcción: usado
Ubicación: Land-salam 
we sale a rotary blow molder sidel sbo 6 serie 02 . includes: - oven - preforms elevator and positioner, speed 6000 b/h, full documentation,for pet neck pco 1810.with quick change exisiting formart of 38mm type bericap
with new panel in 2017.      
with aditionnel cost we can make all rénovation with guarranty.  SALAM WE SALE A ROTARY BLOW MOLDER SIDEL SBO 6 SERIE 02 . INCLUDES: - OVEN - PREFORMS ELEVATOR AND POSITIONER, SPEED 6000 B/H, FULL DOCUMENTATION,FOR PET NECK PCO 1810.WITH QUICK CHANGE EXISITING FORMART OF 38MM TYPE BERICAP WITH NEW PANEL IN 2017. WITH ADITIONNEL COST WE CAN MAKE ALL RéNOVATION WITH GUARRANTY.
Vendedor: LPFC SRL
Año de construcción: usado
Ubicación: Land-salam 
we sale a rotary pet blow molder smi sr6 2010. in verry good condition includes: - oven - preforms elevator and positioner , speed 8500 b/h, full documentation,for pet neck pco 1810 (pco 28mm). quick change suitable for format 0.33 l , 1 l, 1.5 l and 2l.
can bee see in production.  
dismantling and pick up is free,     SALAM WE SALE A ROTARY PET BLOW MOLDER SMI SR6 2010. IN VERRY GOOD CONDITION INCLUDES: - OVEN - PREFORMS ELEVATOR AND POSITIONER , SPEED 8500 B/H, FULL DOCUMENTATION,FOR PET NECK PCO 1810 (PCO 28MM). QUICK CHANGE SUITABLE FOR FORMAT 0.33 L , 1 L, 1.5 L AND 2L. CAN BEE SEE IN PRODUCTION. DISMANTLING AND PICK UP IS FREE,
Vendedor: LPFC SRL
Año de construcción: usado
Ubicación: Land-salam 
we sale a rotary blow molder sidel sbo10 serie 02 . includes: - oven - preforms elevator and positioner -machine in medium condition, disassemtled, , speed 14000 b/h, full documentation,for pet neck pco 1810.
with aditionnel cost we can make all rénovation with guarranty.
we have so a rotary blow machine sbo6 serie 02 completed.       SALAM WE SALE A ROTARY BLOW MOLDER SIDEL SBO10 SERIE 02 . INCLUDES: - OVEN - PREFORMS ELEVATOR AND POSITIONER -MACHINE IN MEDIUM CONDITION, DISASSEMTLED, , SPEED 14000 B/H, FULL DOCUMENTATION,FOR PET NECK PCO 1810. WITH ADITIONNEL COST WE CAN MAKE ALL RéNOVATION WITH GUARRANTY. WE HAVE SO A ROTARY BLOW MACHINE SBO6 SERIE 02 COMPLETED.
Vendedor: LPFC SRL
Año de construcción: usado
Ubicación: Land-salam 
we sale a rotary blow molder sidel sbo10 serie 02 . includes: - oven - preforms elevator and positioner -machine in medium condition, disantling, , speed 14000 b/h, full documentation,for pet neck pco 1810.
with aditionnel cost we can make all rénovation with guarranty.
we have so a rotary blow machine sbo6 serie 02 completed.      
  SALAM WE SALE A ROTARY BLOW MOLDER SIDEL SBO10 SERIE 02 . INCLUDES: - OVEN - PREFORMS ELEVATOR AND POSITIONER -MACHINE IN MEDIUM CONDITION, DISANTLING, , SPEED 14000 B/H, FULL DOCUMENTATION,FOR PET NECK PCO 1810. WITH ADITIONNEL COST WE CAN MAKE ALL RéNOVATION WITH GUARRANTY. WE HAVE SO A ROTARY BLOW MACHINE SBO6 SERIE 02 COMPLETED.
Vendedor: LPFC SRL
Año de construcción: usado
Ubicación: Land-for sale once in a lifetime 13800 working hours hypet 300
year 2006 husky pet 72 cavities hypet 300ton model p100/110 e120

full system
water chiler, resin dryer, dehumidifier, and complete mold 72 cavities pco 26g with hot runner
dismantle, commissioning and startup also available upon request
400v 50hz
availability: immediate
exworks asia
only 13800 hours on it, almost 20 months   FOR SALE ONCE IN A LIFETIME 13800 WORKING HOURS HYPET 300 YEAR 2006 HUSKY PET 72 CAVITIES HYPET 300TON MODEL P100/110 E120 FULL SYSTEM WATER CHILER, RESIN DRYER, DEHUMIDIFIER, AND COMPLETE MOLD 72 CAVITIES PCO 26G WITH HOT RUNNER DISMANTLE, COMMISSIONING AND STARTUP ALSO AVAILABLE UPON REQUEST 400V 50HZ AVAILABILITY: IMMEDIATE EXWORKS ASIA ONLY 13800 HOURS ON IT, ALMOST 20 MONTHS
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-this in dry aseptic pet line and it is suitable for low-acid, pulpy and fibrous fruit juices, non-carbonated beverages, ice tea and dairy products. the hygienic level is so high that also milk-based infant formulas are possible. the line was installed in 2013 and is currently in production. it will be available in the summer 2019, and it can be inspected while operating. the delivery includes the product deaeration and pasteurizer, preform feeding and sterilization, aseptic blower-filler-capper block, cip line, cap feeding and sterilization system, bottle and label and inspection systems, shrink packer, handle applicator and conveyors. palletizer is excluded. 
 
the product first goes through gas removal treatment and is then pasteurized in a tubular heat exchanger. the product is cooled down and pumped into an aseptic buffer tank prior to filling. in the over pressurized filling and capping block empty bottles and bottle caps are sterilized with a gaseous h2o2. an h2o2 sensor outside the machine monitors any leaks of the sterilizing agent. also the pressure inside the filling block is monitored, and an automatic shutdown results if the pressure drops. a liquid nitrogen is injected after filling, to remove air from the container and to make the bottle rigid with internal pressure. 
 
both preforms and caps are inspected and faulty pieces are automatically rejected before they are conveyed into the aseptic area. the delivery includes eight (8) sets of different molds for the blow molder which are changed in a special clean room in the blow molder, eliminating the need to enter the aseptic area of the machine. the bottle size change is done very easily in the filler-capper by a mechanical adjustment, and no change parts are needed except the molds in the blow molder. 
 
  
list of main equipment 
•	preform kipper tanner, krones model 827 
•	preform belt transport approx. 50 meters
•	preform inspector preformcheck k-760a09
•	preform sterilizer with h2o2 prejet linear k-436344
•	preform feeding device contifeed rs k-998472
•	processing department krones varioasept j, k-b72058
o	deaeration tank 
o	tubular pasteurizer, suitable for pulp and fiber containing products, pasteurizing temperature 95 – 105 °c, product flow up to 22 m3/h, typical retention time 30 seconds 
o	aseptic product tank
o	aseptic buffer tank for filler
o	pumps, valves, flow meters and other auxiliaries
•	cip station, khs innopro, 2 circuits, approx. 2 x 12 m3 and 1 x 7 m3 tanks 
•	contipure aseptblock dn
o	blow molder krones contiform 16 s/h, serie iii k-552-002 
o	aseptic filler contiform 1.440-44-103, k-102-065 with 44 filling valves
o	capper with closure inspection k960-33-103
o	cap feeding system with sterilizer 
o	chiller mta 
o	8 sets of molds (0.25, 4x0.33, 0.50, 1.0 and 1.5 liters)  
•	filling and cap inspector checkmat 731 k-731u55
•	belt conveyor for full bottles sunco k-995570 and khs 
•	labeling machine contiroll with 16 turtles, hot glue, opp, belt drive, one station with two feeding reels
•	shrink wrap packer khs kisters sp 050 b, year 2004 
•	handle applicator khs innopack csm 050-2-lm, year 2004
•	belt conveyor for packages 
    THIS IN DRY ASEPTIC PET LINE AND IT IS SUITABLE FOR LOW-ACID, PULPY AND FIBROUS FRUIT JUICES, NON-CARBONATED BEVERAGES, ICE TEA AND DAIRY PRODUCTS. THE HYGIENIC LEVEL IS SO HIGH THAT ALSO MILK-BASED INFANT FORMULAS ARE POSSIBLE. THE LINE WAS INSTALLED IN 2013 AND IS CURRENTLY IN PRODUCTION. IT WILL BE AVAILABLE IN THE SUMMER 2019, AND IT CAN BE INSPECTED WHILE OPERATING. THE DELIVERY INCLUDES THE PRODUCT DEAERATION AND PASTEURIZER, PREFORM FEEDING AND STERILIZATION, ASEPTIC BLOWER-FILLER-CAPPER BLOCK, CIP LINE, CAP FEEDING AND STERILIZATION SYSTEM, BOTTLE AND LABEL AND INSPECTION SYSTEMS, SHRINK PACKER, HANDLE APPLICATOR AND CONVEYORS. PALLETIZER IS EXCLUDED. THE PRODUCT FIRST GOES THROUGH GAS REMOVAL TREATMENT AND IS THEN PASTEURIZED IN A TUBULAR HEAT EXCHANGER. THE PRODUCT IS COOLED DOWN AND PUMPED INTO AN ASEPTIC BUFFER TANK PRIOR TO FILLING. IN THE OVER PRESSURIZED FILLING AND CAPPING BLOCK EMPTY BOTTLES AND BOTTLE CAPS ARE STERILIZED WITH A GASEOUS H2O2. AN H2O2 SENSOR OUTSIDE THE MACHINE MONITORS ANY LEAKS OF THE STERILIZING AGENT. ALSO THE PRESSURE INSIDE THE FILLING BLOCK IS MONITORED, AND AN AUTOMATIC SHUTDOWN RESULTS IF THE PRESSURE DROPS. A LIQUID NITROGEN IS INJECTED AFTER FILLING, TO REMOVE AIR FROM THE CONTAINER AND TO MAKE THE BOTTLE RIGID WITH INTERNAL PRESSURE. BOTH PREFORMS AND CAPS ARE INSPECTED AND FAULTY PIECES ARE AUTOMATICALLY REJECTED BEFORE THEY ARE CONVEYED INTO THE ASEPTIC AREA. THE DELIVERY INCLUDES EIGHT (8) SETS OF DIFFERENT MOLDS FOR THE BLOW MOLDER WHICH ARE CHANGED IN A SPECIAL CLEAN ROOM IN THE BLOW MOLDER, ELIMINATING THE NEED TO ENTER THE ASEPTIC AREA OF THE MACHINE. THE BOTTLE SIZE CHANGE IS DONE VERY EASILY IN THE FILLER-CAPPER BY A MECHANICAL ADJUSTMENT, AND NO CHANGE PARTS ARE NEEDED EXCEPT THE MOLDS IN THE BLOW MOLDER. LIST OF MAIN EQUIPMENT • PREFORM KIPPER TANNER, KRONES MODEL 827 • PREFORM BELT TRANSPORT APPROX. 50 METERS • PREFORM INSPECTOR PREFORMCHECK K-760A09 • PREFORM STERILIZER WITH H2O2 PREJET LINEAR K-436344 • PREFORM FEEDING DEVICE CONTIFEED RS K-998472 • PROCESSING DEPARTMENT KRONES VARIOASEPT J, K-B72058 O DEAERATION TANK O TUBULAR PASTEURIZER, SUITABLE FOR PULP AND FIBER CONTAINING PRODUCTS, PASTEURIZING TEMPERATURE 95 – 105 °C, PRODUCT FLOW UP TO 22 M3/H, TYPICAL RETENTION TIME 30 SECONDS O ASEPTIC PRODUCT TANK O ASEPTIC BUFFER TANK FOR FILLER O PUMPS, VALVES, FLOW METERS AND OTHER AUXILIARIES • CIP STATION, KHS INNOPRO, 2 CIRCUITS, APPROX. 2 X 12 M3 AND 1 X 7 M3 TANKS • CONTIPURE ASEPTBLOCK DN O BLOW MOLDER KRONES CONTIFORM 16 S/H, SERIE III K-552-002 O ASEPTIC FILLER CONTIFORM 1.440-44-103, K-102-065 WITH 44 FILLING VALVES O CAPPER WITH CLOSURE INSPECTION K960-33-103 O CAP FEEDING SYSTEM WITH STERILIZER O CHILLER MTA O 8 SETS OF MOLDS (0.25, 4X0.33, 0.50, 1.0 AND 1.5 LITERS) • FILLING AND CAP INSPECTOR CHECKMAT 731 K-731U55 • BELT CONVEYOR FOR FULL BOTTLES SUNCO K-995570 AND KHS • LABELING MACHINE CONTIROLL WITH 16 TURTLES, HOT GLUE, OPP, BELT DRIVE, ONE STATION WITH TWO FEEDING REELS • SHRINK WRAP PACKER KHS KISTERS SP 050 B, YEAR 2004 • HANDLE APPLICATOR KHS INNOPACK CSM 050-2-LM, YEAR 2004 • BELT CONVEYOR FOR PACKAGES
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-filling line for water in pet bottles sidel 30600 bph 
  
this line was deivered by sidel in year 2003 and it has been filling sparkling water in 0.5, 1.5 and 2.0 liter pet bottles. the line is complete from blow molder to secondary packaging and palletizing. pet compressor, bottle inspector and bottle dryers are not included. this line includes a nitro dose system and a handle applicator for the shrink packs. the line is currently in operation and will be available in 2018. 
  
product: 	still and sparkling water
capacity: 	30.600 bph in 0.5 l
 	15.500 bph in 1.5 l 
 	14.000 bph in 2.0 l
bottle neck format: 	pco 1881 short neck 28 mm 
packages: 	shrink pack, euro pallet + tray 
control plc: 	siemens simatic s7


preform feeding 
manufacturer: 	sameto technifil
year: 	2003
tipper: 	sidel tremie a3
feeder: 	sidel chaise a3 

blow molder 
manufacturer: 	sidel 
type: 	sbo 20 
year: 	2003 
container sizes: 	0.5, 1.5 and 2.0 ltr
number of moulds: 	20 
cap thread: 	28 mm
chiller: 	yes 

filler 
manufacturer: 	sidel 
type: 	rv-p9018 kcr 
year: 	2003 
number of filling valves: 	90 
number of rinsing valves: 	90, one time rinsing 
number of capping heads: 	18 
filling process: 	isobaric 
capper make: 	arol 
cap thread: 	28 mm pco 1881 short neck 
data coder: 	domino ddc-3, year 2003 

filling inspector: 	heuft spectrum tx 

nitro dose system 
manufacturer: 	vaccuum barrier 
type: 	ms doser
year: 	2010 

carbonator 
manufacturer: 	sidel 
type: 	carbo 230 
year: 	2003 

labeling machine 
manufacturer: 	krones 
type: 	contiroll k745-f82 
year: 	2004
number of stations: 	2 
gluing system: 	hot melt 
label material: 	opp, wrap-around 
data coder: 	domino ddc-3 
label inspector: 	no 

air conveyor: 	sidel atr, 120 m, automatic size adjustment 
bottle conveyors: 	80 m approx. 
pack conveyors: 	20 m
pallet conveyors: 	7-8 m 

shrink wrapper 
manufacturer: 	cermex 
type: 	tsp 4sdi 
year: 	2003 
capacity: 	45 packs/min 
format: 	3x4, no tray 
control plc: 	siemens s7 

handle applicator 
manufacturer: 	twin pack
type: 	mde 
year: 	2003
 
palletizer 
manufacturer: 	berchi 
type: 	genius ptf-2
year: 	2003 
capacity: 	50 pallets/h 
pallet size: 	euro standard 1200 x 800 mm 

stretch wrapper 
manufacturer: 	robopack 
type: 	vitesse vscp 
year: 	2003 
control unit: 	siemens s7 
pack conveyors: 	20 m
pallet conveyors: 	7-8 m 

 FILLING LINE FOR WATER IN PET BOTTLES SIDEL 30600 BPH THIS LINE WAS DEIVERED BY SIDEL IN YEAR 2003 AND IT HAS BEEN FILLING SPARKLING WATER IN 0.5, 1.5 AND 2.0 LITER PET BOTTLES. THE LINE IS COMPLETE FROM BLOW MOLDER TO SECONDARY PACKAGING AND PALLETIZING. PET COMPRESSOR, BOTTLE INSPECTOR AND BOTTLE DRYERS ARE NOT INCLUDED. THIS LINE INCLUDES A NITRO DOSE SYSTEM AND A HANDLE APPLICATOR FOR THE SHRINK PACKS. THE LINE IS CURRENTLY IN OPERATION AND WILL BE AVAILABLE IN 2018. PRODUCT: STILL AND SPARKLING WATER CAPACITY: 30.600 BPH IN 0.5 L 15.500 BPH IN 1.5 L 14.000 BPH IN 2.0 L BOTTLE NECK FORMAT: PCO 1881 SHORT NECK 28 MM PACKAGES: SHRINK PACK, EURO PALLET + TRAY CONTROL PLC: SIEMENS SIMATIC S7 PREFORM FEEDING MANUFACTURER: SAMETO TECHNIFIL YEAR: 2003 TIPPER: SIDEL TREMIE A3 FEEDER: SIDEL CHAISE A3 BLOW MOLDER MANUFACTURER: SIDEL TYPE: SBO 20 YEAR: 2003 CONTAINER SIZES: 0.5, 1.5 AND 2.0 LTR NUMBER OF MOULDS: 20 CAP THREAD: 28 MM CHILLER: YES FILLER MANUFACTURER: SIDEL TYPE: RV-P9018 KCR YEAR: 2003 NUMBER OF FILLING VALVES: 90 NUMBER OF RINSING VALVES: 90, ONE TIME RINSING NUMBER OF CAPPING HEADS: 18 FILLING PROCESS: ISOBARIC CAPPER MAKE: AROL CAP THREAD: 28 MM PCO 1881 SHORT NECK DATA CODER: DOMINO DDC-3, YEAR 2003 FILLING INSPECTOR: HEUFT SPECTRUM TX NITRO DOSE SYSTEM MANUFACTURER: VACCUUM BARRIER TYPE: MS DOSER YEAR: 2010 CARBONATOR MANUFACTURER: SIDEL TYPE: CARBO 230 YEAR: 2003 LABELING MACHINE MANUFACTURER: KRONES TYPE: CONTIROLL K745-F82 YEAR: 2004 NUMBER OF STATIONS: 2 GLUING SYSTEM: HOT MELT LABEL MATERIAL: OPP, WRAP-AROUND DATA CODER: DOMINO DDC-3 LABEL INSPECTOR: NO AIR CONVEYOR: SIDEL ATR, 120 M, AUTOMATIC SIZE ADJUSTMENT BOTTLE CONVEYORS: 80 M APPROX. PACK CONVEYORS: 20 M PALLET CONVEYORS: 7-8 M SHRINK WRAPPER MANUFACTURER: CERMEX TYPE: TSP 4SDI YEAR: 2003 CAPACITY: 45 PACKS/MIN FORMAT: 3X4, NO TRAY CONTROL PLC: SIEMENS S7 HANDLE APPLICATOR MANUFACTURER: TWIN PACK TYPE: MDE YEAR: 2003 PALLETIZER MANUFACTURER: BERCHI TYPE: GENIUS PTF-2 YEAR: 2003 CAPACITY: 50 PALLETS/H PALLET SIZE: EURO STANDARD 1200 X 800 MM STRETCH WRAPPER MANUFACTURER: ROBOPACK TYPE: VITESSE VSCP YEAR: 2003 CONTROL UNIT: SIEMENS S7 PACK CONVEYORS: 20 M PALLET CONVEYORS: 7-8 M
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-basic data for bottle and installation
 
bottle
max. bottle-height			350 mm at 10,800 bph.

technichal data of machine
space demand incl. steep-angle-conveyor:	11,7 x 10,8 m 
height of machine: 			3.545 m 
height steep-angle-conveyor :		4.1 m
total weight: 			25,5 tons 
demand of chilled water for blowmoulder: 
(base-moulds and cooling shields) for 1.5 l,	
at8,5 bar, 24 m3/h and 10 0c:                          	62 kw 

elektrical data
connected load: 			400/3~/n- 50hz
install. heating power (standard):		285 kw
connection value: 			298 kva
average consumption		
for1,5 l / 27 gr preform per 1000 bot.:		5,1 kwh


options:
preform-infeed,  documentation
peripheries: chiller
 BASIC DATA FOR BOTTLE AND INSTALLATION BOTTLE MAX. BOTTLE-HEIGHT 350 MM AT 10,800 BPH. TECHNICHAL DATA OF MACHINE SPACE DEMAND INCL. STEEP-ANGLE-CONVEYOR: 11,7 X 10,8 M HEIGHT OF MACHINE: 3.545 M HEIGHT STEEP-ANGLE-CONVEYOR : 4.1 M TOTAL WEIGHT: 25,5 TONS DEMAND OF CHILLED WATER FOR BLOWMOULDER: (BASE-MOULDS AND COOLING SHIELDS) FOR 1.5 L, AT8,5 BAR, 24 M3/H AND 10 0C: 62 KW ELEKTRICAL DATA CONNECTED LOAD: 400/3~/N- 50HZ INSTALL. HEATING POWER (STANDARD): 285 KW CONNECTION VALUE: 298 KVA AVERAGE CONSUMPTION FOR1,5 L / 27 GR PREFORM PER 1000 BOT.: 5,1 KWH OPTIONS: PREFORM-INFEED, DOCUMENTATION PERIPHERIES: CHILLER
Vendedor: KHS Corpoplast GmbH
Año de construcción: usado
Ubicación: Land-blow molding machine kosme ksb 4000 
  
this blow molding machine was made by austrian kosme in 2000. it has four inline cavities and four heating modules. the machine is in fair condition with low operating hours and it was dismantled two years ago and placed in a warehouse. delivery includes preform feeding system with bunker, mta chiller and one 1.5-liter mold set.   
  
manufacturer	kosme / krones
manufacturer’s type	kosme ksb 4000 
manufacturing year	2000
serial number	40077
number of cavities	4 
number of heating modules	4
number of adjustment areas	8 
capacity	max 4,000 bph in 1.5 liter
total operating hours	29 942
bottles	pet cylindrical bottles 0.1 – 2.0 liters
neck format	pco 1881 - 28 mm
max bottle dimensions	diameter 110 mm, height 340 mm
control system	lenze
electric voltage 	400 v/ 50 hz, 100 a 
installed heating power	50 kw 
machine main dimensions	4200 x 1850 x 2200 (lxwxh)
machine weight	5500 kg 
  
 BLOW MOLDING MACHINE KOSME KSB 4000 THIS BLOW MOLDING MACHINE WAS MADE BY AUSTRIAN KOSME IN 2000. IT HAS FOUR INLINE CAVITIES AND FOUR HEATING MODULES. THE MACHINE IS IN FAIR CONDITION WITH LOW OPERATING HOURS AND IT WAS DISMANTLED TWO YEARS AGO AND PLACED IN A WAREHOUSE. DELIVERY INCLUDES PREFORM FEEDING SYSTEM WITH BUNKER, MTA CHILLER AND ONE 1.5-LITER MOLD SET. MANUFACTURER KOSME / KRONES MANUFACTURER’S TYPE KOSME KSB 4000 MANUFACTURING YEAR 2000 SERIAL NUMBER 40077 NUMBER OF CAVITIES 4 NUMBER OF HEATING MODULES 4 NUMBER OF ADJUSTMENT AREAS 8 CAPACITY MAX 4,000 BPH IN 1.5 LITER TOTAL OPERATING HOURS 29 942 BOTTLES PET CYLINDRICAL BOTTLES 0.1 – 2.0 LITERS NECK FORMAT PCO 1881 - 28 MM MAX BOTTLE DIMENSIONS DIAMETER 110 MM, HEIGHT 340 MM CONTROL SYSTEM LENZE ELECTRIC VOLTAGE 400 V/ 50 HZ, 100 A INSTALLED HEATING POWER 50 KW MACHINE MAIN DIMENSIONS 4200 X 1850 X 2200 (LXWXH) MACHINE WEIGHT 5500 KG
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-preform-injection molding system with the capacity to also produce heavier preforms (up to 55 g) on 72-cavity-tooling with the biggest injection unit on board available for this platform (extruder screw diam.140 mm. 
the PREFORM-INJECTION MOLDING SYSTEM WITH THE CAPACITY TO ALSO PRODUCE HEAVIER PREFORMS (UP TO 55 G) ON 72-CAVITY-TOOLING WITH THE BIGGEST INJECTION UNIT ON BOARD AVAILABLE FOR THIS PLATFORM (EXTRUDER SCREW DIAM.140 MM. THE "PACKAGE"INCLUDES: ONE RESIN DRYING AND DEHUMIDIFYING COMBO: DRYPACK, MODEL DP1100/11, WITH 6,500-L-SILO DESIGNED AND MADE BY EISBAER-TROCKENTECHNIK GMBH. THE COMBINATION NEEDS LESS POWER AND LESS SPACE AND IS EASIER TO SET UP.
Vendedor: GloCon TST GmbH
Año de construcción: usado
Ubicación: Land-preform injection molding machine sized for preform molding tools of up to 72 cavities @ 45 g unit weight. equipped with large injection unit (120-mm-extruder, 110-mm-shooting pot for max.shotweight of 3.344 g pet). complete process package includes: motan-resin dryer and eisbaer-dehumidifyer.maintained at top level availability (maintenance log) up to last shot before decommissioning in november. equipment set up for shipment in glocon. 32, 48 and 72-cav.-molds available. PREFORM INJECTION MOLDING MACHINE SIZED FOR PREFORM MOLDING TOOLS OF UP TO 72 CAVITIES @ 45 G UNIT WEIGHT. EQUIPPED WITH LARGE INJECTION UNIT (120-MM-EXTRUDER, 110-MM-SHOOTING POT FOR MAX.SHOTWEIGHT OF 3.344 G PET). COMPLETE PROCESS PACKAGE INCLUDES: MOTAN-RESIN DRYER AND EISBAER-DEHUMIDIFYER.MAINTAINED AT TOP LEVEL AVAILABILITY (MAINTENANCE LOG) UP TO LAST SHOT BEFORE DECOMMISSIONING IN NOVEMBER. EQUIPMENT SET UP FOR SHIPMENT IN GLOCON. 32, 48 AND 72-CAV.-MOLDS AVAILABLE.
Vendedor: GloCon TST GmbH
Año de construcción: usado
Ubicación: Land-preform injection molding machine sized for preform molding tools of up to 72 cavities @ 45 g unit weight. equipped with large injection unit (120-mm-extruder, 110-mm-shooting pot for max.shotweight of 3.344 g pet). complete process package includes: motan-resin dryer and eisbaer-dehumidifyer.maintained at top level availability (maintenance log) up to last shot before decommissioning in november. equipment set up for shipment in glocon. 32, 48 and 72-cav.-molds available.
  PREFORM INJECTION MOLDING MACHINE SIZED FOR PREFORM MOLDING TOOLS OF UP TO 72 CAVITIES @ 45 G UNIT WEIGHT. EQUIPPED WITH LARGE INJECTION UNIT (120-MM-EXTRUDER, 110-MM-SHOOTING POT FOR MAX.SHOTWEIGHT OF 3.344 G PET). COMPLETE PROCESS PACKAGE INCLUDES: MOTAN-RESIN DRYER AND EISBAER-DEHUMIDIFYER.MAINTAINED AT TOP LEVEL AVAILABILITY (MAINTENANCE LOG) UP TO LAST SHOT BEFORE DECOMMISSIONING IN NOVEMBER. EQUIPMENT SET UP FOR SHIPMENT IN GLOCON. 32, 48 AND 72-CAV.-MOLDS AVAILABLE.
Vendedor: GloCon TST GmbH
Año de construcción: usado
Ubicación: Land-premium stretchblow machine for production of approx.28.000 pet-beverage bottles/hour, in excellent, impeccably maintained condition (maintenance log), inspection date on agreement.
set up to blow preforms with pco1881-neck finish.
has been upgraded with airbackplus® air recovery systems in 2014 to reduce high-pressure air also resulting in reduced kwh-consumption and downsized compressor.  PREMIUM STRETCHBLOW MACHINE FOR PRODUCTION OF APPROX.28.000 PET-BEVERAGE BOTTLES/HOUR, IN EXCELLENT, IMPECCABLY MAINTAINED CONDITION (MAINTENANCE LOG), INSPECTION DATE ON AGREEMENT. SET UP TO BLOW PREFORMS WITH PCO1881-NECK FINISH. HAS BEEN UPGRADED WITH AIRBACKPLUS® AIR RECOVERY SYSTEMS IN 2014 TO REDUCE HIGH-PRESSURE AIR ALSO RESULTING IN REDUCED KWH-CONSUMPTION AND DOWNSIZED COMPRESSOR.
Vendedor: GloCon TST GmbH
Año de construcción: usado
Precio: 550.000 €
Ubicación: Land-filling line krones / kosme pet 4500 bph for csd

the line was built by kosme (nowadays a part of krones) in 2007. it has been in water filling operation only less than 900 total operating hours and is still installed, powered and can be tested. line is also suitable for carbonated and non-carbonated soft drinks and waters. three sets of molds will be a part of this delivery. this line contains also mixer – carbonator which allows to produce carbonated soft drinks. condition is very good.

main characteristics of this line

manufacturer                             kosme / krones

manufacturing year                   2007

total operating hours                873 hours only

products                                   waters, csd

capacity                                  4500 bph in 1.5 liter pet

neck finish                              plastic scew pco 28 mm  

molds                                      2 l 47.5 gr, 1.5 l 39.5 gr and 0.5 l 20.5 gr

max co2 content                    8 gr / liter

max concentrate mix              1:7

electric suppy                         400v +/- 5% 50 hz +/- 0,5% 3ph+n+pe
 

list of main equipment, all made in year 2007

blow molding machine kosme ksb 3000 s1
          linear blow molding machine with capacity of 4500 bph in 1.5 liters

          equipped with kosmatic faulty pet bottle discharge system 

          includes preform feeding system and mta tae 051 chiller for blow molder

high pressure air compressor kaeser csdx 137 with high pressure dryer, micro filter and buffer tank
pneumatic conveyor kosme “lt”
pet bottle filler kosme isoblock nh 24/24/6. neck handling, isobaric filling, all parts aisi 304. 24 rinsing stations with spray and dip system, 24 filling nozzles and arol capper with 6 capping heads.
bottle conveyors type kosme “ft”
air dryer kosme “air 2000” with two blowers
labeler kosmr extra hot melt 8 t si 1. wraparound hot clue labeler for precut paper and plastic labels
shrink wrapping machine kosme with shrink tunnel. packaging formats 3x2 bottles for 1.5 and 2 liters and 3x4 for 0.5 liter bottles
mixer euromix 10 with carbonizer. designed to produce carbonated soft drinks by mixing water and syrup and adding co2. capacity 10 000 liters/hour, syrup-water mixing ration from 3:1 to 7:1, max co2 8 gr/liter
water ionizing unit kosme “ozomix 700” capacity 7000 l/h, max product temp 30c
automatic cip line kosme eurosan with 1 x 2 m3 insulated and 1 x 2 m3 not insulated tank.
liquid co2 tank buse
semiautomatic pallet stretch wrapping machine FILLING LINE KRONES / KOSME PET 4500 BPH FOR CSD THE LINE WAS BUILT BY KOSME (NOWADAYS A PART OF KRONES) IN 2007. IT HAS BEEN IN WATER FILLING OPERATION ONLY LESS THAN 900 TOTAL OPERATING HOURS AND IS STILL INSTALLED, POWERED AND CAN BE TESTED. LINE IS ALSO SUITABLE FOR CARBONATED AND NON-CARBONATED SOFT DRINKS AND WATERS. THREE SETS OF MOLDS WILL BE A PART OF THIS DELIVERY. THIS LINE CONTAINS ALSO MIXER – CARBONATOR WHICH ALLOWS TO PRODUCE CARBONATED SOFT DRINKS. CONDITION IS VERY GOOD. MAIN CHARACTERISTICS OF THIS LINE MANUFACTURER KOSME / KRONES MANUFACTURING YEAR 2007 TOTAL OPERATING HOURS 873 HOURS ONLY PRODUCTS WATERS, CSD CAPACITY 4500 BPH IN 1.5 LITER PET NECK FINISH PLASTIC SCEW PCO 28 MM MOLDS 2 L 47.5 GR, 1.5 L 39.5 GR AND 0.5 L 20.5 GR MAX CO2 CONTENT 8 GR / LITER MAX CONCENTRATE MIX 1:7 ELECTRIC SUPPY 400V +/- 5% 50 HZ +/- 0,5% 3PH+N+PE LIST OF MAIN EQUIPMENT, ALL MADE IN YEAR 2007 BLOW MOLDING MACHINE KOSME KSB 3000 S1 LINEAR BLOW MOLDING MACHINE WITH CAPACITY OF 4500 BPH IN 1.5 LITERS EQUIPPED WITH KOSMATIC FAULTY PET BOTTLE DISCHARGE SYSTEM INCLUDES PREFORM FEEDING SYSTEM AND MTA TAE 051 CHILLER FOR BLOW MOLDER HIGH PRESSURE AIR COMPRESSOR KAESER CSDX 137 WITH HIGH PRESSURE DRYER, MICRO FILTER AND BUFFER TANK PNEUMATIC CONVEYOR KOSME “LT” PET BOTTLE FILLER KOSME ISOBLOCK NH 24/24/6. NECK HANDLING, ISOBARIC FILLING, ALL PARTS AISI 304. 24 RINSING STATIONS WITH SPRAY AND DIP SYSTEM, 24 FILLING NOZZLES AND AROL CAPPER WITH 6 CAPPING HEADS. BOTTLE CONVEYORS TYPE KOSME “FT” AIR DRYER KOSME “AIR 2000” WITH TWO BLOWERS LABELER KOSMR EXTRA HOT MELT 8 T SI 1. WRAPAROUND HOT CLUE LABELER FOR PRECUT PAPER AND PLASTIC LABELS SHRINK WRAPPING MACHINE KOSME WITH SHRINK TUNNEL. PACKAGING FORMATS 3X2 BOTTLES FOR 1.5 AND 2 LITERS AND 3X4 FOR 0.5 LITER BOTTLES MIXER EUROMIX 10 WITH CARBONIZER. DESIGNED TO PRODUCE CARBONATED SOFT DRINKS BY MIXING WATER AND SYRUP AND ADDING CO2. CAPACITY 10 000 LITERS/HOUR, SYRUP-WATER MIXING RATION FROM 3:1 TO 7:1, MAX CO2 8 GR/LITER WATER IONIZING UNIT KOSME “OZOMIX 700” CAPACITY 7000 L/H, MAX PRODUCT TEMP 30C AUTOMATIC CIP LINE KOSME EUROSAN WITH 1 X 2 M3 INSULATED AND 1 X 2 M3 NOT INSULATED TANK. LIQUID CO2 TANK BUSE SEMIAUTOMATIC PALLET STRETCH WRAPPING MACHINE
Vendedor: Domarom Star Srl
Año de construcción: usado
Ubicación: Land-toyo 280 ton. injection molding

type si 280 iv
construction year 2009
dbb 720×720mm.
screw diameter 83 mm.
calculated injection volume 1560
n.2 molds to produce pet preforms
30 gr + 42 gr + from 24 impressions
complete frigel preform cooling system
pet piovan drying
loading of a column crane
virginio belt
machine certified for good conditions
can be seen running with client’s mould, previous appointment TOYO 280 TON. INJECTION MOLDING TYPE SI 280 IV CONSTRUCTION YEAR 2009 DBB 720×720MM. SCREW DIAMETER 83 MM. CALCULATED INJECTION VOLUME 1560 N.2 MOLDS TO PRODUCE PET PREFORMS 30 GR + 42 GR + FROM 24 IMPRESSIONS COMPLETE FRIGEL PREFORM COOLING SYSTEM PET PIOVAN DRYING LOADING OF A COLUMN CRANE VIRGINIO BELT MACHINE CERTIFIED FOR GOOD CONDITIONS CAN BE SEEN RUNNING WITH CLIENT’S MOULD, PREVIOUS APPOINTMENT
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-once in a lifetime opportunity

for sale edible oil pet bottles manufacturing plant

* two (2) uniloy-milacron inject-stretch-blow machines 
model: 750nn
year: 2000 
each machine include 10-cavities pet preform mold and blow mold for 48 oz. / 1.4 liters edible oil bottles
* two (2) nissei inject-stretch-blow machines 
model: 650nhii
year: 1996
each machine include 10-cavities pet preform mold and blow mold for 48 oz. / 1.4 liters edible oil bottles
* exworks usa
* ready to load ONCE IN A LIFETIME OPPORTUNITY FOR SALE EDIBLE OIL PET BOTTLES MANUFACTURING PLANT * TWO (2) UNILOY-MILACRON INJECT-STRETCH-BLOW MACHINES MODEL: 750NN YEAR: 2000 EACH MACHINE INCLUDE 10-CAVITIES PET PREFORM MOLD AND BLOW MOLD FOR 48 OZ. / 1.4 LITERS EDIBLE OIL BOTTLES * TWO (2) NISSEI INJECT-STRETCH-BLOW MACHINES MODEL: 650NHII YEAR: 1996 EACH MACHINE INCLUDE 10-CAVITIES PET PREFORM MOLD AND BLOW MOLD FOR 48 OZ. / 1.4 LITERS EDIBLE OIL BOTTLES * EXWORKS USA * READY TO LOAD
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-husky used pet preform mold in good working order
cavities 48
neck finish pco 28mm 1816
weight: 52.10 grams
48 cav hot runner: also available (contact us)   HUSKY USED PET PREFORM MOLD IN GOOD WORKING ORDER CAVITIES 48 NECK FINISH PCO 28MM 1816 WEIGHT: 52.10 GRAMS 48 CAV HOT RUNNER: ALSO AVAILABLE (CONTACT US)
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-husky used pet preform mold in good working order
cavities 48
neck finish pco 28mm 1816
weight: 43.02 grams
48 cav hot runner: also available (contact us) HUSKY USED PET PREFORM MOLD IN GOOD WORKING ORDER CAVITIES 48 NECK FINISH PCO 28MM 1816 WEIGHT: 43.02 GRAMS 48 CAV HOT RUNNER: ALSO AVAILABLE (CONTACT US)
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-husky used pet preform mold in good working order
cavities 48
neck finish pco 28mm 1816
weight:27.71 grams
48 cav hot runner: also available (contact us)
  HUSKY USED PET PREFORM MOLD IN GOOD WORKING ORDER CAVITIES 48 NECK FINISH PCO 28MM 1816 WEIGHT:27.71 GRAMS 48 CAV HOT RUNNER: ALSO AVAILABLE (CONTACT US)
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-blow molder krones contiform c10 – 12 000 bph 
  
this blow molder was built by krones in 1999, it was refurbished by krones in 2016. the machine is currently installed, powered and can be tested, and it is available for immediate delivery. the delivery includes molds for 1.0 and 1.5 liter pet bottles. chiller and preform feeder are not included.  
  
manufacturer: 	krones ag
model: 	contiform 112 – 10 
year: 	1999 
number of molds: 	10 
capacity: 	12 000 bph 
bottle sizes: 	1.0 and 1.5 liter 
neck type: 	28 mm, pco 1810 long neck
operating hours: 	7 748 h after refurbishment 
control plc: 	siemens simatic s5
dimensions: 	3.07 x 3.4 x 2.54 m (lxwxh)
weight: 	12 000 kg 
electric power: 	162 kw 

 BLOW MOLDER KRONES CONTIFORM C10 – 12 000 BPH THIS BLOW MOLDER WAS BUILT BY KRONES IN 1999, IT WAS REFURBISHED BY KRONES IN 2016. THE MACHINE IS CURRENTLY INSTALLED, POWERED AND CAN BE TESTED, AND IT IS AVAILABLE FOR IMMEDIATE DELIVERY. THE DELIVERY INCLUDES MOLDS FOR 1.0 AND 1.5 LITER PET BOTTLES. CHILLER AND PREFORM FEEDER ARE NOT INCLUDED. MANUFACTURER: KRONES AG MODEL: CONTIFORM 112 – 10 YEAR: 1999 NUMBER OF MOLDS: 10 CAPACITY: 12 000 BPH BOTTLE SIZES: 1.0 AND 1.5 LITER NECK TYPE: 28 MM, PCO 1810 LONG NECK OPERATING HOURS: 7 748 H AFTER REFURBISHMENT CONTROL PLC: SIEMENS SIMATIC S5 DIMENSIONS: 3.07 X 3.4 X 2.54 M (LXWXH) WEIGHT: 12 000 KG ELECTRIC POWER: 162 KW
Vendedor: JADE Trading OY
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)