19 ofertas

Año de construcción: usado
Precio: 6.500 €
Ubicación: Land-centrifugal fan of reitz, new!

year 2017
11.84 power kw
max temp. 80 â° c
flow rate 180 m3/min  CENTRIFUGAL FAN OF REITZ, NEW! YEAR 2017 11.84 POWER KW MAX TEMP. 80 ° C FLOW RATE 180 M3/MIN
Vendedor: MetReTec GmbH
Año de construcción: usado
Precio: 2.950 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 4.250 €
Ubicación: Land-suction temperature 20 â° c serial-number: 291630 flow rate: 250 mâ³ â??min total pressure increase: 400 dapa power: 21,05 kw speed: 2940 1/min year: 2012 max. temperature 80 â° c

SUCTION TEMPERATURE 20 ° C SERIAL-NUMBER: 291630 FLOW RATE: 250 M³ �?MIN TOTAL PRESSURE INCREASE: 400 DAPA POWER: 21,05 KW SPEED: 2940 1/MIN YEAR: 2012 MAX. TEMPERATURE 80 ° C
Vendedor: MetReTec GmbH
Año de construcción: usado
Precio: 2.800 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-motor: 22 kw
motorspeed: 1500 1/min  MOTOR: 22 KW MOTORSPEED: 1500 1/MIN
Vendedor: Andreas Fabig Maschinenhandel
Año de construcción: usado
Precio: 3.950 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-motor: 132 kw
motorspeed: 1500 1/min MOTOR: 132 KW MOTORSPEED: 1500 1/MIN
Vendedor: Andreas Fabig Maschinenhandel
Año de construcción: usado
Precio: 670 €
Ubicación: Land-agitator reitz 0.75 kw / 670 rpm and schrã¤gblattrã¼hrer 244 mm

with beam in aluminium profiles 45 * 45 mm.

electric motor: drehmomentstarker, slowly rotating kw, 8-pole 670 rpm, i 2.73 a = electric motor emp, 3 x 400 volt, 50 hz, 0.75, m = 10.7 nm, ip55, type b5, wave 20 x 40 mm, weight approx. 30 kg.
                               
shaft: precision stainless steel shaft d20, length 700 mm, diameter 20 mm, material stainless steel

: clutch rigid, bare, material stainless steel

stirrer: double schrã¤gblattrã¼hrer, diameter 244 mm, material stainless steel
wing angle adjustable
 AGITATOR REITZ 0.75 KW / 670 RPM AND SCHRäGBLATTRüHRER 244 MM WITH BEAM IN ALUMINIUM PROFILES 45 * 45 MM. ELECTRIC MOTOR: DREHMOMENTSTARKER, SLOWLY ROTATING KW, 8-POLE 670 RPM, I 2.73 A = ELECTRIC MOTOR EMP, 3 X 400 VOLT, 50 HZ, 0.75, M = 10.7 NM, IP55, TYPE B5, WAVE 20 X 40 MM, WEIGHT APPROX. 30 KG. SHAFT: PRECISION STAINLESS STEEL SHAFT D20, LENGTH 700 MM, DIAMETER 20 MM, MATERIAL STAINLESS STEEL : CLUTCH RIGID, BARE, MATERIAL STAINLESS STEEL STIRRER: DOUBLE SCHRäGBLATTRüHRER, DIAMETER 244 MM, MATERIAL STAINLESS STEEL WING ANGLE ADJUSTABLE
Vendedor: Reitz Technik GmbH
Año de construcción: usado
Ubicación: Land-dough divider & round weaver multimatic s<br/>  <br/>  -type: 4-row mus<br/>    -year of construction: 2001<br/>    -stainless steel casing<br/>    -600-2,000 pcs/hour per row (fold and weight-dependent)<br/>    -weight range from 35 to 85gr<br/>    -action drum for 60-70gr dough pieces<br/>    -single piston blockable - spreitzbandlaenge 900mm<br/>    -connection 400v, 16a-cee plug<br/>    -overhaul DOUGH DIVIDER & ROUND WEAVER MULTIMATIC S

-TYPE: 4-ROW MUS
-YEAR OF CONSTRUCTION: 2001
-STAINLESS STEEL CASING
-600-2,000 PCS/HOUR PER ROW (FOLD AND WEIGHT-DEPENDENT)
-WEIGHT RANGE FROM 35 TO 85GR
-ACTION DRUM FOR 60-70GR DOUGH PIECES
-SINGLE PISTON BLOCKABLE - SPREITZBANDLAENGE 900MM
-CONNECTION 400V, 16A-CEE PLUG
-OVERHAUL
Vendedor: Altuntas Bäckereimaschinen GmbH
Año de construcción: usado
Precio: 950 €
Ubicación: Land-mobile mixing container 150 litres of used electric siemens, 0.75 kw, 1500 rpm and zweiblã¤ttrigem schrã¤gblattrã¼hrer 244 mmschonung of the motor by motor protection device.

purpose: running fast mixer for liquid media.
 
shaft: stainless steel shaft diameter 20 mm, length 700 mm, material 1.4301
 
mixing body: 2-bladed schrã¤gblattrã¼hrer, diameter 244 mm, material 1.4301
 
stainless steel mixing tank 150 litres with cover and drain valve.
lightweight aluminum frame aluminum profile 45 x 45 mm with swivel castors and 2 locking casters. MOBILE MIXING CONTAINER 150 LITRES OF USED ELECTRIC SIEMENS, 0.75 KW, 1500 RPM AND ZWEIBL&ATILDE;&CURREN;TTRIGEM SCHR&ATILDE;&CURREN;GBLATTR&ATILDE;&FRAC14;HRER 244 MMSCHONUNG OF THE MOTOR BY MOTOR PROTECTION DEVICE. PURPOSE: RUNNING FAST MIXER FOR LIQUID MEDIA. SHAFT: STAINLESS STEEL SHAFT DIAMETER 20 MM, LENGTH 700 MM, MATERIAL 1.4301 MIXING BODY: 2-BLADED SCHR&ATILDE;&CURREN;GBLATTR&ATILDE;&FRAC14;HRER, DIAMETER 244 MM, MATERIAL 1.4301 STAINLESS STEEL MIXING TANK 150 LITRES WITH COVER AND DRAIN VALVE. LIGHTWEIGHT ALUMINUM FRAME ALUMINUM PROFILE 45 X 45 MM WITH SWIVEL CASTORS AND 2 LOCKING CASTERS.
Vendedor: Reitz Technik GmbH
Año de construcción: usado
Ubicación: Land-flow rate 750 mâ³/min (45,000 m â³/h); pressure boost 5600 pa; power 84.6 kw; speed 1500 rpm with spin control and vibration dampers. FLOW RATE 750 M&ACIRC;&SUP3;/MIN (45,000 M &ACIRC;&SUP3;/H); PRESSURE BOOST 5600 PA; POWER 84.6 KW; SPEED 1500 RPM WITH SPIN CONTROL AND VIBRATION DAMPERS.
Vendedor: Thomas Kühnel Import Export
Año de construcción: usado
Ubicación: Land-filter surface: 6400cm², size: din 800x800, operating temperature: 59.85°c max., burstoverpressure at 22.85°c: 0,08-0.12at, torque: 20nm, vacuum pressure: 0.05bar max., including radial fan reitz rge 031-056021-00: inlet temperature: 20°c, inlet pressure: 1.16kg/m³, volume flow: 560-617m³/min, shaft power: 38.53-41.8kw, rotational speed: 2072-2196/min max., operating temperature: 80°c.  FILTER SURFACE: 6400CM², SIZE: DIN 800X800, OPERATING TEMPERATURE: 59.85°C MAX., BURSTOVERPRESSURE AT 22.85°C: 0,08-0.12AT, TORQUE: 20NM, VACUUM PRESSURE: 0.05BAR MAX., INCLUDING RADIAL FAN REITZ RGE 031-056021-00: INLET TEMPERATURE: 20°C, INLET PRESSURE: 1.16KG/M³, VOLUME FLOW: 560-617M³/MIN, SHAFT POWER: 38.53-41.8KW, ROTATIONAL SPEED: 2072-2196/MIN MAX., OPERATING TEMPERATURE: 80°C.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-laboratory press ehsp100f4s

table press with pressure 40 kn (4 tons), presses drive with worm gear screw jacks, gear 1:16, spindle diameter 45 mm, pitch 8 mm, spindle lift 0.5 mm per revolution, press button approx. 120 * 240 mm, height approx. 140 mm.
geared motor 0.75 kw, 1.500u/min., 4-pole, with spur gear i = 1:5.
speed 150 mm / min. maximum dynamic load of 40 kn.
with change control, emergency stop and motor protection device.

sturdy steel frame of presses.
under table made of high-quality aluminium profiles 45 * 45 mm, tabletop 600 * 600 mm, table top made of polyamide pa6. 

the table press is 40 kn pressure (dynamic load). 

typical applications are stamping with exact delivery. 
suitable for pressing of gluing, stamping and pressing.

with electrical heating plate approx. 100 * 200 mm up to 220 â° c, pressure-resistant insulation plate for use in presses, sensor and temperature control. for use as a heat press.

the worm gear screw jack has a locking device so that the pressing plate must not be. the screw is self-locking and thus keeps the press force over time.
 LABORATORY PRESS EHSP100F4S TABLE PRESS WITH PRESSURE 40 KN (4 TONS), PRESSES DRIVE WITH WORM GEAR SCREW JACKS, GEAR 1:16, SPINDLE DIAMETER 45 MM, PITCH 8 MM, SPINDLE LIFT 0.5 MM PER REVOLUTION, PRESS BUTTON APPROX. 120 * 240 MM, HEIGHT APPROX. 140 MM. GEARED MOTOR 0.75 KW, 1.500U/MIN., 4-POLE, WITH SPUR GEAR I = 1:5. SPEED 150 MM / MIN. MAXIMUM DYNAMIC LOAD OF 40 KN. WITH CHANGE CONTROL, EMERGENCY STOP AND MOTOR PROTECTION DEVICE. STURDY STEEL FRAME OF PRESSES. UNDER TABLE MADE OF HIGH-QUALITY ALUMINIUM PROFILES 45 * 45 MM, TABLETOP 600 * 600 MM, TABLE TOP MADE OF POLYAMIDE PA6. THE TABLE PRESS IS 40 KN PRESSURE (DYNAMIC LOAD). TYPICAL APPLICATIONS ARE STAMPING WITH EXACT DELIVERY. SUITABLE FOR PRESSING OF GLUING, STAMPING AND PRESSING. WITH ELECTRICAL HEATING PLATE APPROX. 100 * 200 MM UP TO 220 &ACIRC;&DEG; C, PRESSURE-RESISTANT INSULATION PLATE FOR USE IN PRESSES, SENSOR AND TEMPERATURE CONTROL. FOR USE AS A HEAT PRESS. THE WORM GEAR SCREW JACK HAS A LOCKING DEVICE SO THAT THE PRESSING PLATE MUST NOT BE. THE SCREW IS SELF-LOCKING AND THUS KEEPS THE PRESS FORCE OVER TIME.
Vendedor: Reitz Technik GmbH
Año de construcción: usado
Ubicación: Land-electrical plate press / glue press ehsp522 press area 200 * 630 mm
print 5 kn / 0.5 tons
suitable for plates bonding, embossing, for punching with steel strip cuts

on request with:
-heating and temperature control
-load cells and measuring indicators for use as test press  ELECTRICAL PLATE PRESS / GLUE PRESS EHSP522 PRESS AREA 200 * 630 MM PRINT 5 KN / 0.5 TONS SUITABLE FOR PLATES BONDING, EMBOSSING, FOR PUNCHING WITH STEEL STRIP CUTS ON REQUEST WITH: -HEATING AND TEMPERATURE CONTROL -LOAD CELLS AND MEASURING INDICATORS FOR USE AS TEST PRESS
Vendedor: Reitz Technik GmbH
Año de construcción: usado
Precio: 650 €
Ubicación: Land-plate press - table press - laboratory press - universal press mhsp522

press area 230 * 230 mm
clear width 200 mm
manual drive with worm gear screw jacks 5 kn
pressure 5 kn (0.5 tons)
weight 55 kg
per sensor revolution 0.5 mm path, this little manual force with great force, very fine deliverable.
pressing force is long maintained by self-locking. 
 PLATE PRESS - TABLE PRESS - LABORATORY PRESS - UNIVERSAL PRESS MHSP522 PRESS AREA 230 * 230 MM CLEAR WIDTH 200 MM MANUAL DRIVE WITH WORM GEAR SCREW JACKS 5 KN PRESSURE 5 KN (0.5 TONS) WEIGHT 55 KG PER SENSOR REVOLUTION 0.5 MM PATH, THIS LITTLE MANUAL FORCE WITH GREAT FORCE, VERY FINE DELIVERABLE. PRESSING FORCE IS LONG MAINTAINED BY SELF-LOCKING.
Vendedor: Reitz Technik GmbH
Año de construcción: usado
Ubicación: Land-electrical plate press / glue press 0.5 tons

press area 200 * 630 mm
print 5 kn / 0.5 tons
suitable for plates bonding, embossing, for punching with steel strip cuts
2 pcs in stock

on request with:
-heating and temperature control
-load cells and measuring indicators for use as test press ELECTRICAL PLATE PRESS / GLUE PRESS 0.5 TONS PRESS AREA 200 * 630 MM PRINT 5 KN / 0.5 TONS SUITABLE FOR PLATES BONDING, EMBOSSING, FOR PUNCHING WITH STEEL STRIP CUTS 2 PCS IN STOCK ON REQUEST WITH: -HEATING AND TEMPERATURE CONTROL -LOAD CELLS AND MEASURING INDICATORS FOR USE AS TEST PRESS
Vendedor: Reitz Technik GmbH
Año de construcción: usado
Ubicación: Land-electrical workshop press ehsp100f

workshop press with pressure 40 kn (4 tons), 1:16, spindle diameter 45 mm, pitch 8 mm, spindle lift 0.5 mm per revolution. 
geared motor 0.75 kw, 1500 rpm, 4-pole, with spur gear i = 1:5.
speed 150 mm / min. maximum dynamic load of 40 kn.
turn control and main switch with emergency stop.

table 600 * 600 mm, pressing area approx. 120 * 240 mm, height approx. 140 mm.

under table made of high-quality aluminium profiles is 45 * 45 mm, the table top made of polyamide pa6. 

the workshop press has 40 kn pressure (dynamic load). 

typical applications are stamping with exact delivery. 
suitable for pressing of gluing, stamping and pressing.

also, the press can be equipped and used as heating press a hot plate and additional insulating plate with temperature control. 

the screw is self-locking and thus keeps the press force over time. 

at extra charge: heating, insulation plate and temperature control up to 220 ° c for use as a heat press. 

force measuring device to use as a test press. ELECTRICAL WORKSHOP PRESS EHSP100F WORKSHOP PRESS WITH PRESSURE 40 KN (4 TONS), 1:16, SPINDLE DIAMETER 45 MM, PITCH 8 MM, SPINDLE LIFT 0.5 MM PER REVOLUTION. GEARED MOTOR 0.75 KW, 1500 RPM, 4-POLE, WITH SPUR GEAR I = 1:5. SPEED 150 MM / MIN. MAXIMUM DYNAMIC LOAD OF 40 KN. TURN CONTROL AND MAIN SWITCH WITH EMERGENCY STOP. TABLE 600 * 600 MM, PRESSING AREA APPROX. 120 * 240 MM, HEIGHT APPROX. 140 MM. UNDER TABLE MADE OF HIGH-QUALITY ALUMINIUM PROFILES IS 45 * 45 MM, THE TABLE TOP MADE OF POLYAMIDE PA6. THE WORKSHOP PRESS HAS 40 KN PRESSURE (DYNAMIC LOAD). TYPICAL APPLICATIONS ARE STAMPING WITH EXACT DELIVERY. SUITABLE FOR PRESSING OF GLUING, STAMPING AND PRESSING. ALSO, THE PRESS CAN BE EQUIPPED AND USED AS HEATING PRESS A HOT PLATE AND ADDITIONAL INSULATING PLATE WITH TEMPERATURE CONTROL. THE SCREW IS SELF-LOCKING AND THUS KEEPS THE PRESS FORCE OVER TIME. AT EXTRA CHARGE: HEATING, INSULATION PLATE AND TEMPERATURE CONTROL UP TO 220 &DEG; C FOR USE AS A HEAT PRESS. FORCE MEASURING DEVICE TO USE AS A TEST PRESS.
Vendedor: Reitz Technik GmbH
Año de construcción: usado
Ubicación: Land-centrifugal blower centrifugal radial fan needed

manufacturer: reitz fans
type: mxe 025-006330-00
fabr.nr.-bj.: 285990-2012
inlet temperature (t): 20 | 250 ° c
density in the suction port (p1): 1.17 | 0,643 kg / m ³
flow rate (v): 63. 67 m³/min (ca. 3900 m ³/h)
total pressure increase (pt2): 250 dapa
total pressure increase (pt1): 244 | 120 dapa
power (pw): 3.68 | 1.9 kw
speed (n): 2900 | 2920 rpm
maximum speed: 3074/rpm
maximum temperature: 300 ° c
with the housing service opening
inlet / outlet dia. 250 mm

drive motor
siemens 1le10011c a034ab4
400/690 v; a 10.5/6.1; 50 hz; ip55
5,5 kw; 2950 rpm

total approx. 850 x 700 x 950 mm
CENTRIFUGAL BLOWER CENTRIFUGAL RADIAL FAN NEEDED MANUFACTURER: REITZ FANS TYPE: MXE 025-006330-00 FABR.NR.-BJ.: 285990-2012 INLET TEMPERATURE (T): 20 | 250 ° C DENSITY IN THE SUCTION PORT (P1): 1.17 | 0,643 KG / M ³ FLOW RATE (V): 63. 67 M³/MIN (CA. 3900 M ³/H) TOTAL PRESSURE INCREASE (PT2): 250 DAPA TOTAL PRESSURE INCREASE (PT1): 244 | 120 DAPA POWER (PW): 3.68 | 1.9 KW SPEED (N): 2900 | 2920 RPM MAXIMUM SPEED: 3074/RPM MAXIMUM TEMPERATURE: 300 ° C WITH THE HOUSING SERVICE OPENING INLET / OUTLET DIA. 250 MM DRIVE MOTOR SIEMENS 1LE10011C A034AB4 400/690 V; A 10.5/6.1; 50 HZ; IP55 5,5 KW; 2950 RPM TOTAL APPROX. 850 X 700 X 950 MM
Vendedor: Brand GmbH
Año de construcción: usado
Ubicación: Land-centrifugal blower centrifugal radial fan needed

manufacturer: reitz fans
type: mxe 025-006330-00
fabr.nr.-.: 265986-2010
inlet temperature (t): 20 | 250 ° c
density in the suction port (p1): 1.17 | 0,643 kg / m ³
flow rate (v): 63. 67 m³/min (ca. 3900 m ³/h)
total pressure increase (pt2): 250 dapa
total pressure increase (pt1): 244 | 120 dapa
power (pw): 3.68 | 1.9 kw
(n) speed: 2900 rpm
maximum speed: 3074/rpm
maximum temperature: 300 ° c
with the housing service opening
inlet / outlet dia. 250 mm

drive motor
siemens 1la/130-2aa60
400/690 v; 10.3/6.0 a; 50 hz; ip55
5,5 kw; 2925 u/min

total approx. 850 x 700 x 950 mm
CENTRIFUGAL BLOWER CENTRIFUGAL RADIAL FAN NEEDED MANUFACTURER: REITZ FANS TYPE: MXE 025-006330-00 FABR.NR.-.: 265986-2010 INLET TEMPERATURE (T): 20 | 250 ° C DENSITY IN THE SUCTION PORT (P1): 1.17 | 0,643 KG / M ³ FLOW RATE (V): 63. 67 M³/MIN (CA. 3900 M ³/H) TOTAL PRESSURE INCREASE (PT2): 250 DAPA TOTAL PRESSURE INCREASE (PT1): 244 | 120 DAPA POWER (PW): 3.68 | 1.9 KW (N) SPEED: 2900 RPM MAXIMUM SPEED: 3074/RPM MAXIMUM TEMPERATURE: 300 ° C WITH THE HOUSING SERVICE OPENING INLET / OUTLET DIA. 250 MM DRIVE MOTOR SIEMENS 1LA/130-2AA60 400/690 V; 10.3/6.0 A; 50 HZ; IP55 5,5 KW; 2925 U/MIN TOTAL APPROX. 850 X 700 X 950 MM
Vendedor: Brand GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more REITZ types: