970 ofertas

Año de construcción: usado
Ubicación: Land-manex new bottle depalletizer and transport system 47 000 bph

manufacturer: manex & co a.s.
type: d313-65l
year: 2008
serial number: 07/030/01 depalletiser
line capacity: 47 000 bottles / hour
electric supply: 32.29 kw ? 230/400 v ? 50 hz
air consumption: 31 m3/h, min 6 bar
control plc: siemens simatic multi panel
pallet dimensions: 1 200 x 1 000 mm
documentation: in english (operating manuals and spare parts list)
condition: installed - very good condition

this system includes smartscan scanning of pallets, a robot for stacking cardboard between the layers, conveyors for transporting the bottles to the next unit and stacking/removing system for pallets. the portal system of machine ensures its maximum stiffness and minimum of covered area. the frame of machine is welded of the bended profiles made of carbon steel. the protective paint is three-plied anticorrosive basic paint and two layers of the top covering paint. depalletizing completion by the pallet chamber and layer pick-up. the basic drive of machine ? the transfer cases are made by sew. the pneumatic elements are made by festo.

working description:
a pallet with a stack of new bottles is transported by a forklift truck to the chain conveyor. operators remove foil from the stack. the pallet with the bottles then moves to the chain conveyor in the depalletizer lift. the depalletizer lift lifts the conveyor with the full pallet as high as required. the transporter moves the top layer of bottles with the top layer pad to the lamella sorting table. the layer pad pick-up removes the layer pad and places it into the layer pad magazine. the bottles are then sorted to the lamella bottle conveyor and continue on the bottle track to the bottle inserter. conveyor in the lift moves up by the thickness of a layer and the entire cycle repeats. once the last layer bottles has been moved by the last remaining layer pad on the pallet, the pick-up removes the layer pads from the pallet. conveyor with the empty pallet moves down to the bottom position. inverter moves in on the roller conveyor to the pallet magazine. the crate transport system moves empty crates to the bottle inserter conveyor. it inserts the bottles from the bottle conveyor to crates. full crates continue moving on the crate conveyors to the sorting roller table.

machinery components:
- chain conveyor for pallets, 3 pcs
- aggregate of depalletization
o elevator
o chain conveyor in the elevator
o transfer layer
o sheet stop
o pinching
o rear bottle thrust
- inverter
- roller conveyor for pallets
- pallet magazine
- layer pad pick-up - complete
o layer pad pick-up
o layer pad magazine
- pallet layer pad pick-up
- lamella bottle splitting table
- lamella bottle conveyor, 3 pcs
- lamella crate conveyor, 7 pcs
- roller sorting table
- platform
- fence   MANEX NEW BOTTLE DEPALLETIZER AND TRANSPORT SYSTEM 47 000 BPH MANUFACTURER: MANEX & CO A.S. TYPE: D313-65L YEAR: 2008 SERIAL NUMBER: 07/030/01 DEPALLETISER LINE CAPACITY: 47 000 BOTTLES / HOUR ELECTRIC SUPPLY: 32.29 KW ? 230/400 V ? 50 HZ AIR CONSUMPTION: 31 M3/H, MIN 6 BAR CONTROL PLC: SIEMENS SIMATIC MULTI PANEL PALLET DIMENSIONS: 1 200 X 1 000 MM DOCUMENTATION: IN ENGLISH (OPERATING MANUALS AND SPARE PARTS LIST) CONDITION: INSTALLED - VERY GOOD CONDITION THIS SYSTEM INCLUDES SMARTSCAN SCANNING OF PALLETS, A ROBOT FOR STACKING CARDBOARD BETWEEN THE LAYERS, CONVEYORS FOR TRANSPORTING THE BOTTLES TO THE NEXT UNIT AND STACKING/REMOVING SYSTEM FOR PALLETS. THE PORTAL SYSTEM OF MACHINE ENSURES ITS MAXIMUM STIFFNESS AND MINIMUM OF COVERED AREA. THE FRAME OF MACHINE IS WELDED OF THE BENDED PROFILES MADE OF CARBON STEEL. THE PROTECTIVE PAINT IS THREE-PLIED ANTICORROSIVE BASIC PAINT AND TWO LAYERS OF THE TOP COVERING PAINT. DEPALLETIZING COMPLETION BY THE PALLET CHAMBER AND LAYER PICK-UP. THE BASIC DRIVE OF MACHINE ? THE TRANSFER CASES ARE MADE BY SEW. THE PNEUMATIC ELEMENTS ARE MADE BY FESTO. WORKING DESCRIPTION: A PALLET WITH A STACK OF NEW BOTTLES IS TRANSPORTED BY A FORKLIFT TRUCK TO THE CHAIN CONVEYOR. OPERATORS REMOVE FOIL FROM THE STACK. THE PALLET WITH THE BOTTLES THEN MOVES TO THE CHAIN CONVEYOR IN THE DEPALLETIZER LIFT. THE DEPALLETIZER LIFT LIFTS THE CONVEYOR WITH THE FULL PALLET AS HIGH AS REQUIRED. THE TRANSPORTER MOVES THE TOP LAYER OF BOTTLES WITH THE TOP LAYER PAD TO THE LAMELLA SORTING TABLE. THE LAYER PAD PICK-UP REMOVES THE LAYER PAD AND PLACES IT INTO THE LAYER PAD MAGAZINE. THE BOTTLES ARE THEN SORTED TO THE LAMELLA BOTTLE CONVEYOR AND CONTINUE ON THE BOTTLE TRACK TO THE BOTTLE INSERTER. CONVEYOR IN THE LIFT MOVES UP BY THE THICKNESS OF A LAYER AND THE ENTIRE CYCLE REPEATS. ONCE THE LAST LAYER BOTTLES HAS BEEN MOVED BY THE LAST REMAINING LAYER PAD ON THE PALLET, THE PICK-UP REMOVES THE LAYER PADS FROM THE PALLET. CONVEYOR WITH THE EMPTY PALLET MOVES DOWN TO THE BOTTOM POSITION. INVERTER MOVES IN ON THE ROLLER CONVEYOR TO THE PALLET MAGAZINE. THE CRATE TRANSPORT SYSTEM MOVES EMPTY CRATES TO THE BOTTLE INSERTER CONVEYOR. IT INSERTS THE BOTTLES FROM THE BOTTLE CONVEYOR TO CRATES. FULL CRATES CONTINUE MOVING ON THE CRATE CONVEYORS TO THE SORTING ROLLER TABLE. MACHINERY COMPONENTS: - CHAIN CONVEYOR FOR PALLETS, 3 PCS - AGGREGATE OF DEPALLETIZATION O ELEVATOR O CHAIN CONVEYOR IN THE ELEVATOR O TRANSFER LAYER O SHEET STOP O PINCHING O REAR BOTTLE THRUST - INVERTER - ROLLER CONVEYOR FOR PALLETS - PALLET MAGAZINE - LAYER PAD PICK-UP - COMPLETE O LAYER PAD PICK-UP O LAYER PAD MAGAZINE - PALLET LAYER PAD PICK-UP - LAMELLA BOTTLE SPLITTING TABLE - LAMELLA BOTTLE CONVEYOR, 3 PCS - LAMELLA CRATE CONVEYOR, 7 PCS - ROLLER SORTING TABLE - PLATFORM - FENCE
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación:
general
- partial hollow clamping device (hydraulic), - c-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception hsk-a63, din 69893 - y-axis ±200 mm - b-axis ±120º interpolating, torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in x-, y-, z1-axis - cooling pump 6 bar;20 l/min, - hinge chip conveyor - usb-interface, ethernet-interface; control: siemens ergoline without shopturn 3g
working area
swing diameter over guide ways 700 mm
turning diameter 630 mm
distance between spindles 2260 mm
clamping chuck diameter max. 500 mm
bar diameter max. 102 mm
turning-milling spindle
spindle taper hsk-63a din 69893
spindle speed -12000 rpm
drive power (100% dc) 13,2 kw
drive power (40% dc) 22 kw
torque (100% dc) 60 nm
torque (40% dc) 100 nm
locking moment 1000 nm
main drive 1
drive power (100% dc) 35 kw
drive power (40% dc) 45 kw
speed range - 4000 rpm
torque (100% dc) 600 nm
max. torque (40% dc) 770 nm
c-axis speed -4000 rpm
torque of c-axis (holding torque) 600 nm
tool magazine
number of tools 36
max. tool length 400 mm
max. tool diameter 80 mm
max. tool weight 12 kg
floor space/weight
dimensions (l x w x h) 7,61 x 4,22 x 2,67 m
weight approx. 24000 kg


excentric turning and milling operation excentric turning and milling operation (only with siemens control)
tool monitoring system artis tool break monitoring system make artis, type ctm.
chuck rinsing device, outside chuck rinsing device, outside (main spindle)
clamping with balanced pressure, main sp. balanced pressure clamping device for the main spindle
clamping with balanced pressure, sub-sp. balanced pressure clamping device for sub-spindle
hollow clamping attachment, Ø 104 mm hydraulic hollow clamping attachment dia. 104 mm (4.09 inch) pullforce 94 kn (21.132,04 lbf) at pmax 40 bar (580,151 psi) n max. = 3600 min-¹
turning/milling spindle capto c6 instead hsk -63a turn/mill spindle (standard spindle) with tool reception capto c6 (sandvik) for spindle and 36-fold tool magazine
turret 12-fold vdi 40 with tool drive star type turret, 12-fold with tool drive, reception 40 mm (1.575 inch) din 69880, radial - lower compound slide (x2/z2), ac servo drives with ball screws, absolute, direct measuring system
tailstock function for the counter spindle tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program thrust force 250-600 dan, ctx beta / ctx beta tc. thrust force 250-1200 dan, ctx gamma tc
counter spindle ism 102, c axis instead tailstock counter spindle as integrated spindle motor ism 102 - drive power 35 / 45 (46.9 / 60.9 hp) - partial hollow clamping (hydraulic) - draw tube id 104 mm (4.09 inch) - c axis and spindle brake (hydraulic) - basic slide (z3), ac servo drive with ball screw,
cooling 8/20/80 bar, 980 l, vlies, chiller compact coolant system, consisting of: - coolant tank, 980 litre/259.9 gal. - 8 bar/20 litre/min 20 bar/40 litre/min and 80 bar/11 litre/min (116 psi/5.2 gal/min and 290 psi/ 10.5 gal/min and 1160 psi/2.9 gal/min for turning/milling spindle pr
mechanical oil mist extractor 1100m³/h mechanical oil mist extractor, 1100 m³/h (38,830 ft³/h) with dirtiness indicator, class of filtration h13
tool measuring device, blum with chain magazine tool measuring device make blum for fixed and rotating tools in the turning/milling spindle in combination with chain magazine
add. mag. above tailstock/counter sp., capto c6 additional magazine above the tailstock or counter spindle (right side), 6 tool mountings with tool reception capto c6 automatically changeable with the turning/milling spindle
chain magazine for 120 tools capto c6 tool magazine, 120-fold chain magazine instead of 36-fold disc magazine, tool reception capto c6
3-jaw chuck thw plus 315-104, make schunk 3-jaw power clamping chuck with through-hole and jaw quick-change system type thw plus 315-104, make schunk, incl. connecting elements
collet chuck Ø 100, spanntop collet chuck, system spanntop, Ø100 mm (Ø3.94 in), incl. connecting elements
3-jaw chuck thw plus 315-104, make schunk 3-jaw power clamping chuck with through-hole and jaw quick-change system type thw plus 315-104, make schunk, incl. connecting elements
window rising of the security windows window cleaning of the security windows of both working area doors by compressed air (remark: the employment of coolant can limited the view on the workpiece at machining)
special equipment bar loader iemca
.gif" alt="Land-

general
- partial hollow clamping device (hydraulic), - c-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception hsk-a63, din 69893 - y-axis ±200 mm - b-axis ±120º interpolating, torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in x-, y-, z1-axis - cooling pump 6 bar;20 l/min, - hinge chip conveyor - usb-interface, ethernet-interface; control: siemens ergoline without shopturn 3g
working area
swing diameter over guide ways 700 mm
turning diameter 630 mm
distance between spindles 2260 mm
clamping chuck diameter max. 500 mm
bar diameter max. 102 mm
turning-milling spindle
spindle taper hsk-63a din 69893
spindle speed -12000 rpm
drive power (100% dc) 13,2 kw
drive power (40% dc) 22 kw
torque (100% dc) 60 nm
torque (40% dc) 100 nm
locking moment 1000 nm
main drive 1
drive power (100% dc) 35 kw
drive power (40% dc) 45 kw
speed range - 4000 rpm
torque (100% dc) 600 nm
max. torque (40% dc) 770 nm
c-axis speed -4000 rpm
torque of c-axis (holding torque) 600 nm
tool magazine
number of tools 36
max. tool length 400 mm
max. tool diameter 80 mm
max. tool weight 12 kg
floor space/weight
dimensions (l x w x h) 7,61 x 4,22 x 2,67 m
weight approx. 24000 kg


excentric turning and milling operation excentric turning and milling operation (only with siemens control)
tool monitoring system artis tool break monitoring system make artis, type ctm.
chuck rinsing device, outside chuck rinsing device, outside (main spindle)
clamping with balanced pressure, main sp. balanced pressure clamping device for the main spindle
clamping with balanced pressure, sub-sp. balanced pressure clamping device for sub-spindle
hollow clamping attachment, Ø 104 mm hydraulic hollow clamping attachment dia. 104 mm (4.09 inch) pullforce 94 kn (21.132,04 lbf) at pmax 40 bar (580,151 psi) n max. = 3600 min-¹
turning/milling spindle capto c6 instead hsk -63a turn/mill spindle (standard spindle) with tool reception capto c6 (sandvik) for spindle and 36-fold tool magazine
turret 12-fold vdi 40 with tool drive star type turret, 12-fold with tool drive, reception 40 mm (1.575 inch) din 69880, radial - lower compound slide (x2/z2), ac servo drives with ball screws, absolute, direct measuring system
tailstock function for the counter spindle tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program thrust force 250-600 dan, ctx beta / ctx beta tc. thrust force 250-1200 dan, ctx gamma tc
counter spindle ism 102, c axis instead tailstock counter spindle as integrated spindle motor ism 102 - drive power 35 / 45 (46.9 / 60.9 hp) - partial hollow clamping (hydraulic) - draw tube id 104 mm (4.09 inch) - c axis and spindle brake (hydraulic) - basic slide (z3), ac servo drive with ball screw,
cooling 8/20/80 bar, 980 l, vlies, chiller compact coolant system, consisting of: - coolant tank, 980 litre/259.9 gal. - 8 bar/20 litre/min 20 bar/40 litre/min and 80 bar/11 litre/min (116 psi/5.2 gal/min and 290 psi/ 10.5 gal/min and 1160 psi/2.9 gal/min for turning/milling spindle pr
mechanical oil mist extractor 1100m³/h mechanical oil mist extractor, 1100 m³/h (38,830 ft³/h) with dirtiness indicator, class of filtration h13
tool measuring device, blum with chain magazine tool measuring device make blum for fixed and rotating tools in the turning/milling spindle in combination with chain magazine
add. mag. above tailstock/counter sp., capto c6 additional magazine above the tailstock or counter spindle (right side), 6 tool mountings with tool reception capto c6 automatically changeable with the turning/milling spindle
chain magazine for 120 tools capto c6 tool magazine, 120-fold chain magazine instead of 36-fold disc magazine, tool reception capto c6
3-jaw chuck thw plus 315-104, make schunk 3-jaw power clamping chuck with through-hole and jaw quick-change system type thw plus 315-104, make schunk, incl. connecting elements
collet chuck Ø 100, spanntop collet chuck, system spanntop, Ø100 mm (Ø3.94 in), incl. connecting elements
3-jaw chuck thw plus 315-104, make schunk 3-jaw power clamping chuck with through-hole and jaw quick-change system type thw plus 315-104, make schunk, incl. connecting elements
window rising of the security windows window cleaning of the security windows of both working area doors by compressed air (remark: the employment of coolant can limited the view on the workpiece at machining)
special equipment bar loader iemca
" style="height: 18px;">

GENERAL
- PARTIAL HOLLOW CLAMPING DEVICE (HYDRAULIC), - C-AXIS AND SPINDLE BRAKE (HYDR.) - UPPER COMPOUND SLIDE WITH TURNING-/ MILLING SPINDLE, WITH HYDRAULIC LOCKING RECEPTION HSK-A63, DIN 69893 - Y-AXIS ±200 MM - B-AXIS ±120º INTERPOLATING, TORQUE MOTOR - TOOL MAGAZINE 36-FOLD DISC MAGAZINE, ERGONOMIC FRONT LOAD - ABSOLUTE, DIRECT MEASURING SYSTEMS IN X-, Y-, Z1-AXIS - COOLING PUMP 6 BAR;20 L/MIN, - HINGE CHIP CONVEYOR - USB-INTERFACE, ETHERNET-INTERFACE; CONTROL: SIEMENS ERGOLINE WITHOUT SHOPTURN 3G
WORKING AREA
SWING DIAMETER OVER GUIDE WAYS 700 MM
TURNING DIAMETER 630 MM
DISTANCE BETWEEN SPINDLES 2260 MM
CLAMPING CHUCK DIAMETER MAX. 500 MM
BAR DIAMETER MAX. 102 MM
TURNING-MILLING SPINDLE
SPINDLE TAPER HSK-63A DIN 69893
SPINDLE SPEED -12000 RPM
DRIVE POWER (100% DC) 13,2 KW
DRIVE POWER (40% DC) 22 KW
TORQUE (100% DC) 60 NM
TORQUE (40% DC) 100 NM
LOCKING MOMENT 1000 NM
MAIN DRIVE 1
DRIVE POWER (100% DC) 35 KW
DRIVE POWER (40% DC) 45 KW
SPEED RANGE - 4000 RPM
TORQUE (100% DC) 600 NM
MAX. TORQUE (40% DC) 770 NM
C-AXIS SPEED -4000 RPM
TORQUE OF C-AXIS (HOLDING TORQUE) 600 NM
TOOL MAGAZINE
NUMBER OF TOOLS 36
MAX. TOOL LENGTH 400 MM
MAX. TOOL DIAMETER 80 MM
MAX. TOOL WEIGHT 12 KG
FLOOR SPACE/WEIGHT
DIMENSIONS (L X W X H) 7,61 X 4,22 X 2,67 M
WEIGHT APPROX. 24000 KG


EXCENTRIC TURNING AND MILLING OPERATION EXCENTRIC TURNING AND MILLING OPERATION (ONLY WITH SIEMENS CONTROL)
TOOL MONITORING SYSTEM ARTIS TOOL BREAK MONITORING SYSTEM MAKE ARTIS, TYPE CTM.
CHUCK RINSING DEVICE, OUTSIDE CHUCK RINSING DEVICE, OUTSIDE (MAIN SPINDLE)
CLAMPING WITH BALANCED PRESSURE, MAIN SP. BALANCED PRESSURE CLAMPING DEVICE FOR THE MAIN SPINDLE
CLAMPING WITH BALANCED PRESSURE, SUB-SP. BALANCED PRESSURE CLAMPING DEVICE FOR SUB-SPINDLE
HOLLOW CLAMPING ATTACHMENT, Ø 104 MM HYDRAULIC HOLLOW CLAMPING ATTACHMENT DIA. 104 MM (4.09 INCH) PULLFORCE 94 KN (21.132,04 LBF) AT PMAX 40 BAR (580,151 PSI) N MAX. = 3600 MIN-¹
TURNING/MILLING SPINDLE CAPTO C6 INSTEAD HSK -63A TURN/MILL SPINDLE (STANDARD SPINDLE) WITH TOOL RECEPTION CAPTO C6 (SANDVIK) FOR SPINDLE AND 36-FOLD TOOL MAGAZINE
TURRET 12-FOLD VDI 40 WITH TOOL DRIVE STAR TYPE TURRET, 12-FOLD WITH TOOL DRIVE, RECEPTION 40 MM (1.575 INCH) DIN 69880, RADIAL - LOWER COMPOUND SLIDE (X2/Z2), AC SERVO DRIVES WITH BALL SCREWS, ABSOLUTE, DIRECT MEASURING SYSTEM
TAILSTOCK FUNCTION FOR THE COUNTER SPINDLE TAILSTOCK FUNCTION FOR THE COUNTER SPINDLE, MECHATRONIC CONTROL OF THE SUPPORTING FORCE, SELECTABLE PER PROGRAM THRUST FORCE 250-600 DAN, CTX BETA / CTX BETA TC. THRUST FORCE 250-1200 DAN, CTX GAMMA TC
COUNTER SPINDLE ISM 102, C AXIS INSTEAD TAILSTOCK COUNTER SPINDLE AS INTEGRATED SPINDLE MOTOR ISM 102 - DRIVE POWER 35 / 45 (46.9 / 60.9 HP) - PARTIAL HOLLOW CLAMPING (HYDRAULIC) - DRAW TUBE ID 104 MM (4.09 INCH) - C AXIS AND SPINDLE BRAKE (HYDRAULIC) - BASIC SLIDE (Z3), AC SERVO DRIVE WITH BALL SCREW,
COOLING 8/20/80 BAR, 980 L, VLIES, CHILLER COMPACT COOLANT SYSTEM, CONSISTING OF: - COOLANT TANK, 980 LITRE/259.9 GAL. - 8 BAR/20 LITRE/MIN 20 BAR/40 LITRE/MIN AND 80 BAR/11 LITRE/MIN (116 PSI/5.2 GAL/MIN AND 290 PSI/ 10.5 GAL/MIN AND 1160 PSI/2.9 GAL/MIN FOR TURNING/MILLING SPINDLE PR
MECHANICAL OIL MIST EXTRACTOR 1100M³/H MECHANICAL OIL MIST EXTRACTOR, 1100 M³/H (38,830 FT³/H) WITH DIRTINESS INDICATOR, CLASS OF FILTRATION H13
TOOL MEASURING DEVICE, BLUM WITH CHAIN MAGAZINE TOOL MEASURING DEVICE MAKE BLUM FOR FIXED AND ROTATING TOOLS IN THE TURNING/MILLING SPINDLE IN COMBINATION WITH CHAIN MAGAZINE
ADD. MAG. ABOVE TAILSTOCK/COUNTER SP., CAPTO C6 ADDITIONAL MAGAZINE ABOVE THE TAILSTOCK OR COUNTER SPINDLE (RIGHT SIDE), 6 TOOL MOUNTINGS WITH TOOL RECEPTION CAPTO C6 AUTOMATICALLY CHANGEABLE WITH THE TURNING/MILLING SPINDLE
CHAIN MAGAZINE FOR 120 TOOLS CAPTO C6 TOOL MAGAZINE, 120-FOLD CHAIN MAGAZINE INSTEAD OF 36-FOLD DISC MAGAZINE, TOOL RECEPTION CAPTO C6
3-JAW CHUCK THW PLUS 315-104, MAKE SCHUNK 3-JAW POWER CLAMPING CHUCK WITH THROUGH-HOLE AND JAW QUICK-CHANGE SYSTEM TYPE THW PLUS 315-104, MAKE SCHUNK, INCL. CONNECTING ELEMENTS
COLLET CHUCK Ø 100, SPANNTOP COLLET CHUCK, SYSTEM SPANNTOP, Ø100 MM (Ø3.94 IN), INCL. CONNECTING ELEMENTS
3-JAW CHUCK THW PLUS 315-104, MAKE SCHUNK 3-JAW POWER CLAMPING CHUCK WITH THROUGH-HOLE AND JAW QUICK-CHANGE SYSTEM TYPE THW PLUS 315-104, MAKE SCHUNK, INCL. CONNECTING ELEMENTS
WINDOW RISING OF THE SECURITY WINDOWS WINDOW CLEANING OF THE SECURITY WINDOWS OF BOTH WORKING AREA DOORS BY COMPRESSED AIR (REMARK: THE EMPLOYMENT OF COOLANT CAN LIMITED THE VIEW ON THE WORKPIECE AT MACHINING)
SPECIAL EQUIPMENT BAR LOADER IEMCA
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-automatic line for non-alcohol beer production from the normal filtered beer.

two identical plants to produce non-alcoholic beer from normal filtered beer by utilizing microfiltration production technology. the production lines were installed in year 2001 and they are still installed and in good operational condition.

beer is pumped through the microfilter under pressure, water and flavors pass through the microfilter, but alcohol molecules remain on the filter surface and then wash off with the water. after the water with alcohol goes to distillation column, where alcohol separates from the water. water after separation returns back into the system for reuse. both lines has original capacity of 20 hl unfiltered beer but due to capacity decrease of wood framed filters, currently microfilters work with capacity up to 10 hl/h. the cost of replacement new type (plastic) microfilters is about 320 thousand euros. lifetime of new microfilters is about 10 years. otherwise the equipment is in very good condition and immediately available.

technical data

- manufacturer apv
- year of manufacture 2001
- filter type microdyn-nadir dp 100 fp/s
- capacity 2 x 20 hl/h original


list of equipment:
- set of microfilters, 48 pieces with their stainless steel supports and piping
- rectification column with boiler, pumps and valves
- water purification system
- water tank
- cip
- control cabinets
- samplers
- pipes, pumps, valves etc.

note: the heat exchanger and the cooling tower remain at the plant and they are not included in the scope of supply.   AUTOMATIC LINE FOR NON-ALCOHOL BEER PRODUCTION FROM THE NORMAL FILTERED BEER. TWO IDENTICAL PLANTS TO PRODUCE NON-ALCOHOLIC BEER FROM NORMAL FILTERED BEER BY UTILIZING MICROFILTRATION PRODUCTION TECHNOLOGY. THE PRODUCTION LINES WERE INSTALLED IN YEAR 2001 AND THEY ARE STILL INSTALLED AND IN GOOD OPERATIONAL CONDITION. BEER IS PUMPED THROUGH THE MICROFILTER UNDER PRESSURE, WATER AND FLAVORS PASS THROUGH THE MICROFILTER, BUT ALCOHOL MOLECULES REMAIN ON THE FILTER SURFACE AND THEN WASH OFF WITH THE WATER. AFTER THE WATER WITH ALCOHOL GOES TO DISTILLATION COLUMN, WHERE ALCOHOL SEPARATES FROM THE WATER. WATER AFTER SEPARATION RETURNS BACK INTO THE SYSTEM FOR REUSE. BOTH LINES HAS ORIGINAL CAPACITY OF 20 HL UNFILTERED BEER BUT DUE TO CAPACITY DECREASE OF WOOD FRAMED FILTERS, CURRENTLY MICROFILTERS WORK WITH CAPACITY UP TO 10 HL/H. THE COST OF REPLACEMENT NEW TYPE (PLASTIC) MICROFILTERS IS ABOUT 320 THOUSAND EUROS. LIFETIME OF NEW MICROFILTERS IS ABOUT 10 YEARS. OTHERWISE THE EQUIPMENT IS IN VERY GOOD CONDITION AND IMMEDIATELY AVAILABLE. TECHNICAL DATA - MANUFACTURER APV - YEAR OF MANUFACTURE 2001 - FILTER TYPE MICRODYN-NADIR DP 100 FP/S - CAPACITY 2 X 20 HL/H ORIGINAL LIST OF EQUIPMENT: - SET OF MICROFILTERS, 48 PIECES WITH THEIR STAINLESS STEEL SUPPORTS AND PIPING - RECTIFICATION COLUMN WITH BOILER, PUMPS AND VALVES - WATER PURIFICATION SYSTEM - WATER TANK - CIP - CONTROL CABINETS - SAMPLERS - PIPES, PUMPS, VALVES ETC. NOTE: THE HEAT EXCHANGER AND THE COOLING TOWER REMAIN AT THE PLANT AND THEY ARE NOT INCLUDED IN THE SCOPE OF SUPPLY.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación:
general
- c-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, reception hsk-a63 din 69893, with hydr. locking at turning - y-axis ±210 mm - b-axis ±120º, torque motor - tool magazine 36-fold disc magazine, - absolute, direct measuring systems in x-, y-, z1-axis - cooling pump 6 bar, 20 l/min, cooling - cooling system for spindle motors, motor console, turning-milling spindle, b axis torque motor; control: celos with siemens 840d sl operate
working area
swing diameter over guide ways 630 mm
turning diameter 630 mm
distance between spindles 1250 mm
bar diameter max. 102 mm
main drive 1
drive power (100% dc) 35 kw
drive power (40% dc) 45 kw
speed range - 4000 rpm
torque (100% dc) 600 nm
max. torque (40% dc) 770 nm
c-axis speed -4000 rpm
torque of c-axis (holding torque) 600 nm
input precision of c-axis 0,001 degree
turning-milling spindle
spindle taper hsk-63a din 69893
spindle speed -12000 rpm
drive power (100% dc) 27 kw
drive power (40% dc) 36 kw
torque (100% dc) 160 nm
torque (40% dc) 220 nm
angular value, min. 0,001 degree
locking moment 1700 nm
tool magazine
number of tools 36
max. tool diameter 80 mm
max. tool weight 12 kg
floor space/weight
dimensions (l x w x h) 6,86 x 4,22 x 2,53 m
weight approx. 18500 kg


excentric turning and milling operation excentric turning and milling operation (only with siemens control)
5-axis simultaneus machining 5-axis simultaneous machining
y1-axis with hydraulic locking y1-axis with hydraulic locking locking force 42 kn (9442 lbf)
tailstock function for the counter spindle tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program thrust force 250-600 dan, ctx beta / ctx beta tc. thrust force 250-1200 dan, ctx gamma tc
counter spindle ism 76 counter spindle as integrated spindle motor ism 76 - drive power 25 / 34 (33,5 /45,5 hp) - partial hollow clamping (hydraulic) - draw tube id 67 mm (2.63) - c axis and spindle brake (hydraulic) - basic slide (z3), ac servo drive with ball screw, a
bfu 8/20 bar, 600 l compact coolant system, consisting of: - coolant tank, 600 litre/158.5 gal - 8 bar/20 litre/min (ctx gamma tc 2nd: 8 bar/80 l/min /116 psi/ 21.1 gal/min) and 20 bar/25 litre/min (theoretical pump performance) (116.psi/5.2 gal/min and 290 psi/6
hinged typ chip conveyor hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min
mechanical oil mist extractor 1100m³/h mechanical oil mist extractor, 1100 m³/h (38,830 ft³/h) with dirtiness indicator, class of filtration h13
automatic actuation of sliding cover, electrical automatic actuation of sliding cover, electrical. (remark: option b-l7250, automatic loading hatch is not possible)
workpiece touch probe, blum workpiece touch probe, make blum with cycle package quickstart consisting of: touch probe tc60 interchangeable in turning/milling spindle incl. sending and receiving unit 1 probe tip, measuring cycles
sensor package industry 4.0 sensor package industry 4.0 for holistic condition monitoring with visualization in condition analyser app and analysis of the machine and the machining processes (attention: the dmg mori condition analyser app is not part of this option)
3-jaw chuck, bhd 315-95, make smw 3-jaw power clamping chuck with through-hole, type bhd 315/95, make smw-autoblok incl. connecting elements
3-jaw chuck, bhd 315-95, make smw 3-jaw power clamping chuck with through-hole, type bhd 315/95, make smw-autoblok incl. connecting elements
ligh switch cabinet ligh switch cabinet (fluoresent lamp starterless) with integrated socket, 230 v, 2 a load, make rittal on lott via transformer chead main switch
design version black design version black working area door, front cover beneath working area door and front pane frame in colour deep black
package for increased ambient temperature package for increased ambient temperature consisting of cooling system for control cabinet (until 40º)
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
.gif" alt="Land-

general
- c-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, reception hsk-a63 din 69893, with hydr. locking at turning - y-axis ±210 mm - b-axis ±120º, torque motor - tool magazine 36-fold disc magazine, - absolute, direct measuring systems in x-, y-, z1-axis - cooling pump 6 bar, 20 l/min, cooling - cooling system for spindle motors, motor console, turning-milling spindle, b axis torque motor; control: celos with siemens 840d sl operate
working area
swing diameter over guide ways 630 mm
turning diameter 630 mm
distance between spindles 1250 mm
bar diameter max. 102 mm
main drive 1
drive power (100% dc) 35 kw
drive power (40% dc) 45 kw
speed range - 4000 rpm
torque (100% dc) 600 nm
max. torque (40% dc) 770 nm
c-axis speed -4000 rpm
torque of c-axis (holding torque) 600 nm
input precision of c-axis 0,001 degree
turning-milling spindle
spindle taper hsk-63a din 69893
spindle speed -12000 rpm
drive power (100% dc) 27 kw
drive power (40% dc) 36 kw
torque (100% dc) 160 nm
torque (40% dc) 220 nm
angular value, min. 0,001 degree
locking moment 1700 nm
tool magazine
number of tools 36
max. tool diameter 80 mm
max. tool weight 12 kg
floor space/weight
dimensions (l x w x h) 6,86 x 4,22 x 2,53 m
weight approx. 18500 kg


excentric turning and milling operation excentric turning and milling operation (only with siemens control)
5-axis simultaneus machining 5-axis simultaneous machining
y1-axis with hydraulic locking y1-axis with hydraulic locking locking force 42 kn (9442 lbf)
tailstock function for the counter spindle tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program thrust force 250-600 dan, ctx beta / ctx beta tc. thrust force 250-1200 dan, ctx gamma tc
counter spindle ism 76 counter spindle as integrated spindle motor ism 76 - drive power 25 / 34 (33,5 /45,5 hp) - partial hollow clamping (hydraulic) - draw tube id 67 mm (2.63) - c axis and spindle brake (hydraulic) - basic slide (z3), ac servo drive with ball screw, a
bfu 8/20 bar, 600 l compact coolant system, consisting of: - coolant tank, 600 litre/158.5 gal - 8 bar/20 litre/min (ctx gamma tc 2nd: 8 bar/80 l/min /116 psi/ 21.1 gal/min) and 20 bar/25 litre/min (theoretical pump performance) (116.psi/5.2 gal/min and 290 psi/6
hinged typ chip conveyor hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min
mechanical oil mist extractor 1100m³/h mechanical oil mist extractor, 1100 m³/h (38,830 ft³/h) with dirtiness indicator, class of filtration h13
automatic actuation of sliding cover, electrical automatic actuation of sliding cover, electrical. (remark: option b-l7250, automatic loading hatch is not possible)
workpiece touch probe, blum workpiece touch probe, make blum with cycle package quickstart consisting of: touch probe tc60 interchangeable in turning/milling spindle incl. sending and receiving unit 1 probe tip, measuring cycles
sensor package industry 4.0 sensor package industry 4.0 for holistic condition monitoring with visualization in condition analyser app and analysis of the machine and the machining processes (attention: the dmg mori condition analyser app is not part of this option)
3-jaw chuck, bhd 315-95, make smw 3-jaw power clamping chuck with through-hole, type bhd 315/95, make smw-autoblok incl. connecting elements
3-jaw chuck, bhd 315-95, make smw 3-jaw power clamping chuck with through-hole, type bhd 315/95, make smw-autoblok incl. connecting elements
ligh switch cabinet ligh switch cabinet (fluoresent lamp starterless) with integrated socket, 230 v, 2 a load, make rittal on lott via transformer chead main switch
design version black design version black working area door, front cover beneath working area door and front pane frame in colour deep black
package for increased ambient temperature package for increased ambient temperature consisting of cooling system for control cabinet (until 40º)
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
" style="height: 18px;">

GENERAL
- C-AXIS AND SPINDLE BRAKE (HYDR.) - UPPER COMPOUND SLIDE WITH TURNING-/ MILLING SPINDLE, RECEPTION HSK-A63 DIN 69893, WITH HYDR. LOCKING AT TURNING - Y-AXIS ±210 MM - B-AXIS ±120º, TORQUE MOTOR - TOOL MAGAZINE 36-FOLD DISC MAGAZINE, - ABSOLUTE, DIRECT MEASURING SYSTEMS IN X-, Y-, Z1-AXIS - COOLING PUMP 6 BAR, 20 L/MIN, COOLING - COOLING SYSTEM FOR SPINDLE MOTORS, MOTOR CONSOLE, TURNING-MILLING SPINDLE, B AXIS TORQUE MOTOR; CONTROL: CELOS WITH SIEMENS 840D SL OPERATE
WORKING AREA
SWING DIAMETER OVER GUIDE WAYS 630 MM
TURNING DIAMETER 630 MM
DISTANCE BETWEEN SPINDLES 1250 MM
BAR DIAMETER MAX. 102 MM
MAIN DRIVE 1
DRIVE POWER (100% DC) 35 KW
DRIVE POWER (40% DC) 45 KW
SPEED RANGE - 4000 RPM
TORQUE (100% DC) 600 NM
MAX. TORQUE (40% DC) 770 NM
C-AXIS SPEED -4000 RPM
TORQUE OF C-AXIS (HOLDING TORQUE) 600 NM
INPUT PRECISION OF C-AXIS 0,001 DEGREE
TURNING-MILLING SPINDLE
SPINDLE TAPER HSK-63A DIN 69893
SPINDLE SPEED -12000 RPM
DRIVE POWER (100% DC) 27 KW
DRIVE POWER (40% DC) 36 KW
TORQUE (100% DC) 160 NM
TORQUE (40% DC) 220 NM
ANGULAR VALUE, MIN. 0,001 DEGREE
LOCKING MOMENT 1700 NM
TOOL MAGAZINE
NUMBER OF TOOLS 36
MAX. TOOL DIAMETER 80 MM
MAX. TOOL WEIGHT 12 KG
FLOOR SPACE/WEIGHT
DIMENSIONS (L X W X H) 6,86 X 4,22 X 2,53 M
WEIGHT APPROX. 18500 KG


EXCENTRIC TURNING AND MILLING OPERATION EXCENTRIC TURNING AND MILLING OPERATION (ONLY WITH SIEMENS CONTROL)
5-AXIS SIMULTANEUS MACHINING 5-AXIS SIMULTANEOUS MACHINING
Y1-AXIS WITH HYDRAULIC LOCKING Y1-AXIS WITH HYDRAULIC LOCKING LOCKING FORCE 42 KN (9442 LBF)
TAILSTOCK FUNCTION FOR THE COUNTER SPINDLE TAILSTOCK FUNCTION FOR THE COUNTER SPINDLE, MECHATRONIC CONTROL OF THE SUPPORTING FORCE, SELECTABLE PER PROGRAM THRUST FORCE 250-600 DAN, CTX BETA / CTX BETA TC. THRUST FORCE 250-1200 DAN, CTX GAMMA TC
COUNTER SPINDLE ISM 76 COUNTER SPINDLE AS INTEGRATED SPINDLE MOTOR ISM 76 - DRIVE POWER 25 / 34 (33,5 /45,5 HP) - PARTIAL HOLLOW CLAMPING (HYDRAULIC) - DRAW TUBE ID 67 MM (2.63) - C AXIS AND SPINDLE BRAKE (HYDRAULIC) - BASIC SLIDE (Z3), AC SERVO DRIVE WITH BALL SCREW, A
BFU 8/20 BAR, 600 L COMPACT COOLANT SYSTEM, CONSISTING OF: - COOLANT TANK, 600 LITRE/158.5 GAL - 8 BAR/20 LITRE/MIN (CTX GAMMA TC 2ND: 8 BAR/80 L/MIN /116 PSI/ 21.1 GAL/MIN) AND 20 BAR/25 LITRE/MIN (THEORETICAL PUMP PERFORMANCE) (116.PSI/5.2 GAL/MIN AND 290 PSI/6
HINGED TYP CHIP CONVEYOR HINGED TYP CHIP CONVEYOR INCL. COOLANT TANK AND COOLANT PUMP, 6 BAR (87 PSI)/20 LITRE/MIN
MECHANICAL OIL MIST EXTRACTOR 1100M³/H MECHANICAL OIL MIST EXTRACTOR, 1100 M³/H (38,830 FT³/H) WITH DIRTINESS INDICATOR, CLASS OF FILTRATION H13
AUTOMATIC ACTUATION OF SLIDING COVER, ELECTRICAL AUTOMATIC ACTUATION OF SLIDING COVER, ELECTRICAL. (REMARK: OPTION B-L7250, AUTOMATIC LOADING HATCH IS NOT POSSIBLE)
WORKPIECE TOUCH PROBE, BLUM WORKPIECE TOUCH PROBE, MAKE BLUM WITH CYCLE PACKAGE QUICKSTART CONSISTING OF: TOUCH PROBE TC60 INTERCHANGEABLE IN TURNING/MILLING SPINDLE INCL. SENDING AND RECEIVING UNIT 1 PROBE TIP, MEASURING CYCLES
SENSOR PACKAGE INDUSTRY 4.0 SENSOR PACKAGE INDUSTRY 4.0 FOR HOLISTIC CONDITION MONITORING WITH VISUALIZATION IN CONDITION ANALYSER APP AND ANALYSIS OF THE MACHINE AND THE MACHINING PROCESSES (ATTENTION: THE DMG MORI CONDITION ANALYSER APP IS NOT PART OF THIS OPTION)
3-JAW CHUCK, BHD 315-95, MAKE SMW 3-JAW POWER CLAMPING CHUCK WITH THROUGH-HOLE, TYPE BHD 315/95, MAKE SMW-AUTOBLOK INCL. CONNECTING ELEMENTS
3-JAW CHUCK, BHD 315-95, MAKE SMW 3-JAW POWER CLAMPING CHUCK WITH THROUGH-HOLE, TYPE BHD 315/95, MAKE SMW-AUTOBLOK INCL. CONNECTING ELEMENTS
LIGH SWITCH CABINET LIGH SWITCH CABINET (FLUORESENT LAMP STARTERLESS) WITH INTEGRATED SOCKET, 230 V, 2 A LOAD, MAKE RITTAL ON LOTT VIA TRANSFORMER CHEAD MAIN SWITCH
DESIGN VERSION BLACK DESIGN VERSION BLACK WORKING AREA DOOR, FRONT COVER BENEATH WORKING AREA DOOR AND FRONT PANE FRAME IN COLOUR DEEP BLACK
PACKAGE FOR INCREASED AMBIENT TEMPERATURE PACKAGE FOR INCREASED AMBIENT TEMPERATURE CONSISTING OF COOLING SYSTEM FOR CONTROL CABINET (UNTIL 40º)
NETSERVICE (CELOS) NETSERVICE QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS
SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) OVERVIEW OF ALL MAINTENANCE WORK ON THE MACHINE
MESSENGER (CELOS) MESENGER (CELOS) CLEAR LIVE STATUS OF THE NETWORKED MACHINES
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-features:
-format (with radius outside/inside)
-various hole patterns (32 mm grid).
-front-side holes
-holes from above and below
-fitting holes
-slots

facilities:
-drilling unit with 18 individually retrievable spindles
-electrospindle with pneum. werkzeugschnellwechselsystem

technical data:
drilling unit:
length x 3.000 mm
length y 1,300 mm
travel speed 24 u/min
z axis stroke 65 mm
engine speed 30000 rpm
maximum workpiece thickness for drilling 65 mm
-recordings of drill 㸠10 mm
-spindle speed 4,000 rpm
-vacuum pump 100 cbm
milling unit:
spindle drive strength 7.5 hp
spindle speed 18,000 rpm

mass of machine 4,400 x 1,600 x 2,500 mm
weight: approx. 1.200 kg
 FEATURES: -FORMAT (WITH RADIUS OUTSIDE/INSIDE) -VARIOUS HOLE PATTERNS (32 MM GRID). -FRONT-SIDE HOLES -HOLES FROM ABOVE AND BELOW -FITTING HOLES -SLOTS FACILITIES: -DRILLING UNIT WITH 18 INDIVIDUALLY RETRIEVABLE SPINDLES -ELECTROSPINDLE WITH PNEUM. WERKZEUGSCHNELLWECHSELSYSTEM TECHNICAL DATA: DRILLING UNIT: LENGTH X 3.000 MM LENGTH Y 1,300 MM TRAVEL SPEED 24 U/MIN Z AXIS STROKE 65 MM ENGINE SPEED 30000 RPM MAXIMUM WORKPIECE THICKNESS FOR DRILLING 65 MM -RECORDINGS OF DRILL ø 10 MM -SPINDLE SPEED 4,000 RPM -VACUUM PUMP 100 CBM MILLING UNIT: SPINDLE DRIVE STRENGTH 7.5 HP SPINDLE SPEED 18,000 RPM MASS OF MACHINE 4,400 X 1,600 X 2,500 MM WEIGHT: APPROX. 1.200 KG
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación:
general
vertical machining centres; control: 3d-control heidenhain tnc 620
characteristics
table surface 900 x 560 mm
movement x / y / z 600/560/510 mm
spindle taper sk 40 din 69871
tool magazine with 30 positions
max. torque 82 nm
torque (100% dc) 54 nm
drive power (40% dc) 13 kw
drive power (100% dc) 9 kw
speed max. 12000 rpm
maximum load (table centre) 600 kg
rapid feed x / y / z 30/30/30 m/min
dimensions (l x w x h) 2,88 x 2,70 x 2,94 (3,84 x 2,70 x 2,94) m
weight approx. 5000 kg


production package 1 with chip conveyor production package 1 option includes: - internal coolant supply 12 bar; - chip conveyor (scraper type) with tank capacity: 200 l (left) - bed and atc arm flushing via m-function - coolant spray gun for swarf removal - external electronic handwheel - ca
pro time protime electronic display display functions: - remaining machining time - remaining parts to be produced - machine status
renishaw touch probe-kit for heidenhain control renishaw touch probe-kit for heidenhain control option includes: - pp40 touch probe with optical signal transmission; - ots probe for tool measurement; - calibration tool; - calibration ring; - case for equipment.
nc-divider ea 510.l indirect (heidenhain) nc rotary table (4th axis) lehmann with indirect measuring system option includes: - rotary table type ea-510.l - electrical and pneumatic preparation - software preparation to work with rotary table clamping moment 800 nm max. rotary speed 90 rpm center
three-jaw chuck d 160mm for lehmann ea410/510 three-jaw chuck diameter 160 mm for nc rotary table lehmann ea-510.l
manual tailstock for lehmann ea410/510 manual tailstock for nc rotary table lehmann ea-510.l stroke 40 mm centre height 150 mm
tool (un-) loading (heidenhain) tool (un-) loading through magazine door during auto mode option includes: - tool magazine door - automatic magazine shutter (instead of brushes) - buttons for magazine rotation for heidenhain control
direct measuring system x,y,z direct measuring system x, y, z inclusive air purge for measuring system
air coolant internal (through spindle centre) air coolant internal (through spindle centre) switchable via m-function maintained air with low oil rate
tool clamping buttons on the headstock tool clamping and unclamping buttons placed on the headstock cover
technology cycle mpc 2.0 technology cycle machine protection control mpc 2.0 technology cycle monitors the spindle for vibrations, crash, imbalance and defective spindle bearings. machine protection by quick shutdown. for heidenhain control
dmg mori messenger dmg mori messenger installation kit for the connection of one machine.
.gif" alt="Land-

general
vertical machining centres; control: 3d-control heidenhain tnc 620
characteristics
table surface 900 x 560 mm
movement x / y / z 600/560/510 mm
spindle taper sk 40 din 69871
tool magazine with 30 positions
max. torque 82 nm
torque (100% dc) 54 nm
drive power (40% dc) 13 kw
drive power (100% dc) 9 kw
speed max. 12000 rpm
maximum load (table centre) 600 kg
rapid feed x / y / z 30/30/30 m/min
dimensions (l x w x h) 2,88 x 2,70 x 2,94 (3,84 x 2,70 x 2,94) m
weight approx. 5000 kg


production package 1 with chip conveyor production package 1 option includes: - internal coolant supply 12 bar; - chip conveyor (scraper type) with tank capacity: 200 l (left) - bed and atc arm flushing via m-function - coolant spray gun for swarf removal - external electronic handwheel - ca
pro time protime electronic display display functions: - remaining machining time - remaining parts to be produced - machine status
renishaw touch probe-kit for heidenhain control renishaw touch probe-kit for heidenhain control option includes: - pp40 touch probe with optical signal transmission; - ots probe for tool measurement; - calibration tool; - calibration ring; - case for equipment.
nc-divider ea 510.l indirect (heidenhain) nc rotary table (4th axis) lehmann with indirect measuring system option includes: - rotary table type ea-510.l - electrical and pneumatic preparation - software preparation to work with rotary table clamping moment 800 nm max. rotary speed 90 rpm center
three-jaw chuck d 160mm for lehmann ea410/510 three-jaw chuck diameter 160 mm for nc rotary table lehmann ea-510.l
manual tailstock for lehmann ea410/510 manual tailstock for nc rotary table lehmann ea-510.l stroke 40 mm centre height 150 mm
tool (un-) loading (heidenhain) tool (un-) loading through magazine door during auto mode option includes: - tool magazine door - automatic magazine shutter (instead of brushes) - buttons for magazine rotation for heidenhain control
direct measuring system x,y,z direct measuring system x, y, z inclusive air purge for measuring system
air coolant internal (through spindle centre) air coolant internal (through spindle centre) switchable via m-function maintained air with low oil rate
tool clamping buttons on the headstock tool clamping and unclamping buttons placed on the headstock cover
technology cycle mpc 2.0 technology cycle machine protection control mpc 2.0 technology cycle monitors the spindle for vibrations, crash, imbalance and defective spindle bearings. machine protection by quick shutdown. for heidenhain control
dmg mori messenger dmg mori messenger installation kit for the connection of one machine.
" style="height: 18px;">

GENERAL
VERTICAL MACHINING CENTRES; CONTROL: 3D-CONTROL HEIDENHAIN TNC 620
CHARACTERISTICS
TABLE SURFACE 900 X 560 MM
MOVEMENT X / Y / Z 600/560/510 MM
SPINDLE TAPER SK 40 DIN 69871
TOOL MAGAZINE WITH 30 POSITIONS
MAX. TORQUE 82 NM
TORQUE (100% DC) 54 NM
DRIVE POWER (40% DC) 13 KW
DRIVE POWER (100% DC) 9 KW
SPEED MAX. 12000 RPM
MAXIMUM LOAD (TABLE CENTRE) 600 KG
RAPID FEED X / Y / Z 30/30/30 M/MIN
DIMENSIONS (L X W X H) 2,88 X 2,70 X 2,94 (3,84 X 2,70 X 2,94) M
WEIGHT APPROX. 5000 KG


PRODUCTION PACKAGE 1 WITH CHIP CONVEYOR PRODUCTION PACKAGE 1 OPTION INCLUDES: - INTERNAL COOLANT SUPPLY 12 BAR; - CHIP CONVEYOR (SCRAPER TYPE) WITH TANK CAPACITY: 200 L (LEFT) - BED AND ATC ARM FLUSHING VIA M-FUNCTION - COOLANT SPRAY GUN FOR SWARF REMOVAL - EXTERNAL ELECTRONIC HANDWHEEL - CA
PRO TIME PROTIME ELECTRONIC DISPLAY DISPLAY FUNCTIONS: - REMAINING MACHINING TIME - REMAINING PARTS TO BE PRODUCED - MACHINE STATUS
RENISHAW TOUCH PROBE-KIT FOR HEIDENHAIN CONTROL RENISHAW TOUCH PROBE-KIT FOR HEIDENHAIN CONTROL OPTION INCLUDES: - PP40 TOUCH PROBE WITH OPTICAL SIGNAL TRANSMISSION; - OTS PROBE FOR TOOL MEASUREMENT; - CALIBRATION TOOL; - CALIBRATION RING; - CASE FOR EQUIPMENT.
NC-DIVIDER EA 510.L INDIRECT (HEIDENHAIN) NC ROTARY TABLE (4TH AXIS) LEHMANN WITH INDIRECT MEASURING SYSTEM OPTION INCLUDES: - ROTARY TABLE TYPE EA-510.L - ELECTRICAL AND PNEUMATIC PREPARATION - SOFTWARE PREPARATION TO WORK WITH ROTARY TABLE CLAMPING MOMENT 800 NM MAX. ROTARY SPEED 90 RPM CENTER
THREE-JAW CHUCK D 160MM FOR LEHMANN EA410/510 THREE-JAW CHUCK DIAMETER 160 MM FOR NC ROTARY TABLE LEHMANN EA-510.L
MANUAL TAILSTOCK FOR LEHMANN EA410/510 MANUAL TAILSTOCK FOR NC ROTARY TABLE LEHMANN EA-510.L STROKE 40 MM CENTRE HEIGHT 150 MM
TOOL (UN-) LOADING (HEIDENHAIN) TOOL (UN-) LOADING THROUGH MAGAZINE DOOR DURING AUTO MODE OPTION INCLUDES: - TOOL MAGAZINE DOOR - AUTOMATIC MAGAZINE SHUTTER (INSTEAD OF BRUSHES) - BUTTONS FOR MAGAZINE ROTATION FOR HEIDENHAIN CONTROL
DIRECT MEASURING SYSTEM X,Y,Z DIRECT MEASURING SYSTEM X, Y, Z INCLUSIVE AIR PURGE FOR MEASURING SYSTEM
AIR COOLANT INTERNAL (THROUGH SPINDLE CENTRE) AIR COOLANT INTERNAL (THROUGH SPINDLE CENTRE) SWITCHABLE VIA M-FUNCTION MAINTAINED AIR WITH LOW OIL RATE
TOOL CLAMPING BUTTONS ON THE HEADSTOCK TOOL CLAMPING AND UNCLAMPING BUTTONS PLACED ON THE HEADSTOCK COVER
TECHNOLOGY CYCLE MPC 2.0 TECHNOLOGY CYCLE MACHINE PROTECTION CONTROL MPC 2.0 TECHNOLOGY CYCLE MONITORS THE SPINDLE FOR VIBRATIONS, CRASH, IMBALANCE AND DEFECTIVE SPINDLE BEARINGS. MACHINE PROTECTION BY QUICK SHUTDOWN. FOR HEIDENHAIN CONTROL
DMG MORI MESSENGER DMG MORI MESSENGER INSTALLATION KIT FOR THE CONNECTION OF ONE MACHINE.
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-used cream maker / ice cream machine
fabr. crm-telme
performance 3-6 litres per batch USED CREAM MAKER / ICE CREAM MACHINE FABR. CRM-TELME PERFORMANCE 3-6 LITRES PER BATCH
Vendedor: Heim Bäckereitechnik
Año de construcción: usado
Ubicación:
general
universal machining centre in monoblock construction; control: 3d-control heidenhain tnc 640
working area 1
longitudinal 735 mm
cross 650 mm
vertical 560 mm
technical data
feed rate longitudinal/transverse/vertical 40000/40000/40000 mm/min
rapid traverse longitudinal/transverse/vertical 40/40/40 m/min
tool changer
tool changer plane vertical
type of gripper double gripper
number of tools 30
max. tool length 250 mm
max. tool diameter with occupied adjacent pockets 60 mm
max. tool dia. with free neighbouring pockets 160 mm
floor space/weight
weight approx. 14500 kg


direct measuring system direct path measuring system
cabine full protection cabin
nc swivel rotary table directdrive c (a: tandem) nc swivel rotary table tandem drive direct drive c-axis table plate c-axis: d 650 mm / 25.6 in 1 x t-slot 14 h7 / 0.55 h7 (alignment groove, table centre) 8 x t-slot 14 h12 / 0.55 h7 (clamping grooves) permissible load: 1,000 kg / 2,205 lbs c-axis: 80 m
motor spindle hsk-e 50 40,000 rpm motor spindle hsk-e50 spindle speed 20 - 40,000 rpm output 19.5 kw / 15.2 kw (26 hp / 20 hp) torque 16 nm / 12.4 nm (11.8 ft lbs / 8.8 ft lbs) (40 / 100 % duty cycle)
3d quickset extension package 3d quickset extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
infrared measuring probe renishaw infrared measuring probe type renishaw omp 60
tool measuring in machining area blum laser tool measuring in machining area type blum laser tool length and tool diameter measuring vertical
mpc machine protection control mpc machine protection control machine protection by quick shutdown
production package 40 bar/23 l/min, 600 l tank production package: scraper flight conveyor with coolant unit 600 l / 160 gallon, paper band filter discharge height: 950 mm / 37.4 in width: 670 mm / 26.4 in internal coolant supply 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre (ad) (theo
rotating clear-view window rotating clear-view window cabin door
coolant tempering coolant tempering for internal coolant unit 600 lt / 160 gallon: increased tank 980 lt / 259 gallon heating capacity max.: 3,000 w / 4 hp cooling capacity max.: 3,800 w / 5.1 hp
spray pistol with pump spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
cooling cooling by air blast through spindle centre, selection with m function
oil and emulsion mist separator oil and emulsion mist separator mechanical filter throughput volume 600 m³/h
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area release after completed check list
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
dmg mori messenger dmg mori messenger installation kit for the connection of one machine.
dmg mori netservice - client dmg mori netservice - client qualified support by internet-based remote diagnostics will be installed on an external pc!
special equipment - screws on calcitweis: zinc coatet screws - screws on titangrau: black screws - row area tidy
special equipment - feed drives x-/y-axis with liquid cooling - recirculating ballscrew spindle y-/z-axis with liquid cooling
special equipment - celos for heidenhain tnc640 - protime workpiece remaining time - paint cover switch cabinet coolers in machine color - version mode 4 without smartkey ba 4 deselect mode 4 via machine constants!
.gif" alt="Land-

general
universal machining centre in monoblock construction; control: 3d-control heidenhain tnc 640
working area 1
longitudinal 735 mm
cross 650 mm
vertical 560 mm
technical data
feed rate longitudinal/transverse/vertical 40000/40000/40000 mm/min
rapid traverse longitudinal/transverse/vertical 40/40/40 m/min
tool changer
tool changer plane vertical
type of gripper double gripper
number of tools 30
max. tool length 250 mm
max. tool diameter with occupied adjacent pockets 60 mm
max. tool dia. with free neighbouring pockets 160 mm
floor space/weight
weight approx. 14500 kg


direct measuring system direct path measuring system
cabine full protection cabin
nc swivel rotary table directdrive c (a: tandem) nc swivel rotary table tandem drive direct drive c-axis table plate c-axis: d 650 mm / 25.6 in 1 x t-slot 14 h7 / 0.55 h7 (alignment groove, table centre) 8 x t-slot 14 h12 / 0.55 h7 (clamping grooves) permissible load: 1,000 kg / 2,205 lbs c-axis: 80 m
motor spindle hsk-e 50 40,000 rpm motor spindle hsk-e50 spindle speed 20 - 40,000 rpm output 19.5 kw / 15.2 kw (26 hp / 20 hp) torque 16 nm / 12.4 nm (11.8 ft lbs / 8.8 ft lbs) (40 / 100 % duty cycle)
3d quickset extension package 3d quickset extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
infrared measuring probe renishaw infrared measuring probe type renishaw omp 60
tool measuring in machining area blum laser tool measuring in machining area type blum laser tool length and tool diameter measuring vertical
mpc machine protection control mpc machine protection control machine protection by quick shutdown
production package 40 bar/23 l/min, 600 l tank production package: scraper flight conveyor with coolant unit 600 l / 160 gallon, paper band filter discharge height: 950 mm / 37.4 in width: 670 mm / 26.4 in internal coolant supply 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre (ad) (theo
rotating clear-view window rotating clear-view window cabin door
coolant tempering coolant tempering for internal coolant unit 600 lt / 160 gallon: increased tank 980 lt / 259 gallon heating capacity max.: 3,000 w / 4 hp cooling capacity max.: 3,800 w / 5.1 hp
spray pistol with pump spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
cooling cooling by air blast through spindle centre, selection with m function
oil and emulsion mist separator oil and emulsion mist separator mechanical filter throughput volume 600 m³/h
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area release after completed check list
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
dmg mori messenger dmg mori messenger installation kit for the connection of one machine.
dmg mori netservice - client dmg mori netservice - client qualified support by internet-based remote diagnostics will be installed on an external pc!
special equipment - screws on calcitweis: zinc coatet screws - screws on titangrau: black screws - row area tidy
special equipment - feed drives x-/y-axis with liquid cooling - recirculating ballscrew spindle y-/z-axis with liquid cooling
special equipment - celos for heidenhain tnc640 - protime workpiece remaining time - paint cover switch cabinet coolers in machine color - version mode 4 without smartkey ba 4 deselect mode 4 via machine constants!
" style="height: 18px;">

GENERAL
UNIVERSAL MACHINING CENTRE IN MONOBLOCK CONSTRUCTION; CONTROL: 3D-CONTROL HEIDENHAIN TNC 640
WORKING AREA 1
LONGITUDINAL 735 MM
CROSS 650 MM
VERTICAL 560 MM
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 40000/40000/40000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 40/40/40 M/MIN
TOOL CHANGER
TOOL CHANGER PLANE VERTICAL
TYPE OF GRIPPER DOUBLE GRIPPER
NUMBER OF TOOLS 30
MAX. TOOL LENGTH 250 MM
MAX. TOOL DIAMETER WITH OCCUPIED ADJACENT POCKETS 60 MM
MAX. TOOL DIA. WITH FREE NEIGHBOURING POCKETS 160 MM
FLOOR SPACE/WEIGHT
WEIGHT APPROX. 14500 KG


DIRECT MEASURING SYSTEM DIRECT PATH MEASURING SYSTEM
CABINE FULL PROTECTION CABIN
NC SWIVEL ROTARY TABLE DIRECTDRIVE C (A: TANDEM) NC SWIVEL ROTARY TABLE TANDEM DRIVE DIRECT DRIVE C-AXIS TABLE PLATE C-AXIS: D 650 MM / 25.6 IN 1 X T-SLOT 14 H7 / 0.55 H7 (ALIGNMENT GROOVE, TABLE CENTRE) 8 X T-SLOT 14 H12 / 0.55 H7 (CLAMPING GROOVES) PERMISSIBLE LOAD: 1,000 KG / 2,205 LBS C-AXIS: 80 M
MOTOR SPINDLE HSK-E 50 40,000 RPM MOTOR SPINDLE HSK-E50 SPINDLE SPEED 20 - 40,000 RPM OUTPUT 19.5 KW / 15.2 KW (26 HP / 20 HP) TORQUE 16 NM / 12.4 NM (11.8 FT LBS / 8.8 FT LBS) (40 / 100 % DUTY CYCLE)
3D QUICKSET EXTENSION PACKAGE 3D QUICKSET EXTENSION PACKAGE FOR EACH FURTHER MACHINE: SOFTWARE / PASSWORD (ONLY TOGETHER WITH OPTION MEASURING PROBE AND EXISTING SET OF MEASURING TOOLS)
INFRARED MEASURING PROBE RENISHAW INFRARED MEASURING PROBE TYPE RENISHAW OMP 60
TOOL MEASURING IN MACHINING AREA BLUM LASER TOOL MEASURING IN MACHINING AREA TYPE BLUM LASER TOOL LENGTH AND TOOL DIAMETER MEASURING VERTICAL
MPC MACHINE PROTECTION CONTROL MPC MACHINE PROTECTION CONTROL MACHINE PROTECTION BY QUICK SHUTDOWN
PRODUCTION PACKAGE 40 BAR/23 L/MIN, 600 L TANK PRODUCTION PACKAGE: SCRAPER FLIGHT CONVEYOR WITH COOLANT UNIT 600 L / 160 GALLON, PAPER BAND FILTER DISCHARGE HEIGHT: 950 MM / 37.4 IN WIDTH: 670 MM / 26.4 IN INTERNAL COOLANT SUPPLY 40 BAR/23 L/MIN / 580 PSI/6 GALLON/MIN THROUGH SPINDLE CENTRE (AD) (THEO
ROTATING CLEAR-VIEW WINDOW ROTATING CLEAR-VIEW WINDOW CABIN DOOR
COOLANT TEMPERING COOLANT TEMPERING FOR INTERNAL COOLANT UNIT 600 LT / 160 GALLON: INCREASED TANK 980 LT / 259 GALLON HEATING CAPACITY MAX.: 3,000 W / 4 HP COOLING CAPACITY MAX.: 3,800 W / 5.1 HP
SPRAY PISTOL WITH PUMP SPRAY PISTOL WITH PUMP 2 BAR/40 L/MIN 29 PSI/10.4 GALLON/MIN (THEORETICAL PUMP PERFORMANCE)
COOLING COOLING BY AIR BLAST THROUGH SPINDLE CENTRE, SELECTION WITH M FUNCTION
OIL AND EMULSION MIST SEPARATOR OIL AND EMULSION MIST SEPARATOR MECHANICAL FILTER THROUGHPUT VOLUME 600 M³/H
OPERATION MODE 4 OPERATION MODE 4 PROCESS MONITORING IN THE PRODUCTION MANUAL INTERVENTION WITH OPEN DOORS OF MACHINING AREA RELEASE AFTER COMPLETED CHECK LIST
APPLICATION TUNING CYCLE ATC APPLICATION TUNING CYCLE ATC PROGRAMMABLE FEED PARAMETER SELECTION FOR MACHINING TASK: ACCURACY/SURFACE/SPEED
DMG MORI MESSENGER DMG MORI MESSENGER INSTALLATION KIT FOR THE CONNECTION OF ONE MACHINE.
DMG MORI NETSERVICE - CLIENT DMG MORI NETSERVICE - CLIENT QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS WILL BE INSTALLED ON AN EXTERNAL PC!
SPECIAL EQUIPMENT - SCREWS ON CALCITWEIS: ZINC COATET SCREWS - SCREWS ON TITANGRAU: BLACK SCREWS - ROW AREA TIDY
SPECIAL EQUIPMENT - FEED DRIVES X-/Y-AXIS WITH LIQUID COOLING - RECIRCULATING BALLSCREW SPINDLE Y-/Z-AXIS WITH LIQUID COOLING
SPECIAL EQUIPMENT - CELOS FOR HEIDENHAIN TNC640 - PROTIME WORKPIECE REMAINING TIME - PAINT COVER SWITCH CABINET COOLERS IN MACHINE COLOR - VERSION MODE 4 WITHOUT SMARTKEY BA 4 DESELECT MODE 4 VIA MACHINE CONSTANTS!
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-machine number 251034 – 293720
digital controlled combination folder
dct 500 control system with intelligent sheet learning facility
flat pile feeder with tremat suction feeder head
electromechanical 2 sheet detection
4 buckle plates
noise hood 
perf and scoring shafts

2nd mobile unit 
machine number 25075-288724
4 buckle plates
noise hood
perfing and scoring shaft
inbuilt kbk 52 knife folding unit : machine number 250840-288731
sak shingle delivery
 MACHINE NUMBER 251034 – 293720 DIGITAL CONTROLLED COMBINATION FOLDER DCT 500 CONTROL SYSTEM WITH INTELLIGENT SHEET LEARNING FACILITY FLAT PILE FEEDER WITH TREMAT SUCTION FEEDER HEAD ELECTROMECHANICAL 2 SHEET DETECTION 4 BUCKLE PLATES NOISE HOOD PERF AND SCORING SHAFTS 2ND MOBILE UNIT MACHINE NUMBER 25075-288724 4 BUCKLE PLATES NOISE HOOD PERFING AND SCORING SHAFT INBUILT KBK 52 KNIFE FOLDING UNIT : MACHINE NUMBER 250840-288731 SAK SHINGLE DELIVERY
Vendedor: I.E.S. (Scotland) Limited
Año de construcción: usado
Ubicación:
general
universal machining centre; control: 3d-control heidenhain tnc 640
working area 1
longitudinal 935 mm
cross 850 mm
vertical 650 mm
technical data
feed rate longitudinal/transverse/vertical 40000/40000/40000 mm/min
rapid traverse longitudinal/transverse/vertical 40/40/40 m/min
tool changer
tool changer plane vertical
type of gripper double gripper
number of tools 60
max. tool length 420 mm
max. tool diameter with occupied adjacent pockets 80 mm
max. tool dia. with free neighbouring pockets 160 mm


direct measuring system direct path measuring system
cabine full protection cabin
nc swivel rotary table directdrive c (a: tandem) nc swivel rotary table tandem drive direct drive c-axis table plate c-axis: d 850 mm / 33,5 in 1 x t-slot 14 h7 / 0.55 h7 (alignment groove, table centre) 10 x t-slot 14 h12 / 0.55 h7 (clamping grooves) permissible load: 1,500 kg / 3,307 lbs c-axis: 80
motor spindle 20,000 rpm motor spindle speedmaster® hsk-a 63 spindle speed 20 - 20,000 min-1 output 35 kw / 25 kw (47 hp / 33 hp) torque 130 nm / 86 nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
tool magazine, chain vert., 60 pockets tool magazine vertical chain magazine basic with 60 magazine pockets
spindle taper hsk-a 63 spindle taper for hsk-a 63 to din 69893 (incl. adaptation working spindle and standard magazine)
3d quickset extension package 3d quickset extension package for each further machine: software / password
infrared measuring probe renishaw infrared measuring probe type renishaw omp 60
tool measuring in machining area blum laser tool measuring in machining area type blum laser tool length and tool diameter measuring vertical
sensorpaket i4.0 sensor package i4.0: mpc machine protection control sgs spindle growth sensor ics flow sensor
coolant ring jet cooland ring jet for vertical headstock, 15 water jets, 5 air jets
rotating clear-view window rotating clear-view window cabin door
prod. package 80 bar, 980 l, frequency controlled production package: scraper flight conveyor with coolant unit 980 l / 259 gallon, paper band filter discharge height: 950 mm width: 970 mm internal coolant supply frequency controlled 10 bar/37l/min - 80 bar/31 l/min through spindle centre (ad) stepless
coolant tempering/internal coolant supply coolant tempering for internal coolant unit 980 lt / 259 gallon heating capacity max.: 3,000 w / 4 hp cooling capacity max.: 3,800 w / 5.1 hp
spray pistol with pump spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
cooling cooling by air blast through spindle centre, selection with m function
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area release after completed check list
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
dmg mori messenger dmg mori messenger installation kit for the connection of one machine.
dmg mori netservice - client dmg mori netservice - client qualified support by internet-based remote diagnostics will be installed on an external pc!
special equipment - celos for heidenhain tnc640 - protime workpiece remaining time - paint cover switch cabinet coolers in machine color - version mode 4 without smartkey ba 4 deselect mode 4 via machine constants! - cycle interpolation turning - adaptation of elect
special equipment - screws on calcitweis: zinc coatet screws - screws on titangrau: black screws - row area tidy - no advertising from other company
special equipment - feed drives x-/y-axis with liquid cooling - recirculating ballscrew spindle y-/z-axis with liquid cooling
.gif" alt="Land-

general
universal machining centre; control: 3d-control heidenhain tnc 640
working area 1
longitudinal 935 mm
cross 850 mm
vertical 650 mm
technical data
feed rate longitudinal/transverse/vertical 40000/40000/40000 mm/min
rapid traverse longitudinal/transverse/vertical 40/40/40 m/min
tool changer
tool changer plane vertical
type of gripper double gripper
number of tools 60
max. tool length 420 mm
max. tool diameter with occupied adjacent pockets 80 mm
max. tool dia. with free neighbouring pockets 160 mm


direct measuring system direct path measuring system
cabine full protection cabin
nc swivel rotary table directdrive c (a: tandem) nc swivel rotary table tandem drive direct drive c-axis table plate c-axis: d 850 mm / 33,5 in 1 x t-slot 14 h7 / 0.55 h7 (alignment groove, table centre) 10 x t-slot 14 h12 / 0.55 h7 (clamping grooves) permissible load: 1,500 kg / 3,307 lbs c-axis: 80
motor spindle 20,000 rpm motor spindle speedmaster® hsk-a 63 spindle speed 20 - 20,000 min-1 output 35 kw / 25 kw (47 hp / 33 hp) torque 130 nm / 86 nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
tool magazine, chain vert., 60 pockets tool magazine vertical chain magazine basic with 60 magazine pockets
spindle taper hsk-a 63 spindle taper for hsk-a 63 to din 69893 (incl. adaptation working spindle and standard magazine)
3d quickset extension package 3d quickset extension package for each further machine: software / password
infrared measuring probe renishaw infrared measuring probe type renishaw omp 60
tool measuring in machining area blum laser tool measuring in machining area type blum laser tool length and tool diameter measuring vertical
sensorpaket i4.0 sensor package i4.0: mpc machine protection control sgs spindle growth sensor ics flow sensor
coolant ring jet cooland ring jet for vertical headstock, 15 water jets, 5 air jets
rotating clear-view window rotating clear-view window cabin door
prod. package 80 bar, 980 l, frequency controlled production package: scraper flight conveyor with coolant unit 980 l / 259 gallon, paper band filter discharge height: 950 mm width: 970 mm internal coolant supply frequency controlled 10 bar/37l/min - 80 bar/31 l/min through spindle centre (ad) stepless
coolant tempering/internal coolant supply coolant tempering for internal coolant unit 980 lt / 259 gallon heating capacity max.: 3,000 w / 4 hp cooling capacity max.: 3,800 w / 5.1 hp
spray pistol with pump spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
cooling cooling by air blast through spindle centre, selection with m function
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area release after completed check list
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
dmg mori messenger dmg mori messenger installation kit for the connection of one machine.
dmg mori netservice - client dmg mori netservice - client qualified support by internet-based remote diagnostics will be installed on an external pc!
special equipment - celos for heidenhain tnc640 - protime workpiece remaining time - paint cover switch cabinet coolers in machine color - version mode 4 without smartkey ba 4 deselect mode 4 via machine constants! - cycle interpolation turning - adaptation of elect
special equipment - screws on calcitweis: zinc coatet screws - screws on titangrau: black screws - row area tidy - no advertising from other company
special equipment - feed drives x-/y-axis with liquid cooling - recirculating ballscrew spindle y-/z-axis with liquid cooling
" style="height: 18px;">

GENERAL
UNIVERSAL MACHINING CENTRE; CONTROL: 3D-CONTROL HEIDENHAIN TNC 640
WORKING AREA 1
LONGITUDINAL 935 MM
CROSS 850 MM
VERTICAL 650 MM
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 40000/40000/40000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 40/40/40 M/MIN
TOOL CHANGER
TOOL CHANGER PLANE VERTICAL
TYPE OF GRIPPER DOUBLE GRIPPER
NUMBER OF TOOLS 60
MAX. TOOL LENGTH 420 MM
MAX. TOOL DIAMETER WITH OCCUPIED ADJACENT POCKETS 80 MM
MAX. TOOL DIA. WITH FREE NEIGHBOURING POCKETS 160 MM


DIRECT MEASURING SYSTEM DIRECT PATH MEASURING SYSTEM
CABINE FULL PROTECTION CABIN
NC SWIVEL ROTARY TABLE DIRECTDRIVE C (A: TANDEM) NC SWIVEL ROTARY TABLE TANDEM DRIVE DIRECT DRIVE C-AXIS TABLE PLATE C-AXIS: D 850 MM / 33,5 IN 1 X T-SLOT 14 H7 / 0.55 H7 (ALIGNMENT GROOVE, TABLE CENTRE) 10 X T-SLOT 14 H12 / 0.55 H7 (CLAMPING GROOVES) PERMISSIBLE LOAD: 1,500 KG / 3,307 LBS C-AXIS: 80
MOTOR SPINDLE 20,000 RPM MOTOR SPINDLE SPEEDMASTER® HSK-A 63 SPINDLE SPEED 20 - 20,000 MIN-1 OUTPUT 35 KW / 25 KW (47 HP / 33 HP) TORQUE 130 NM / 86 NM (96 FT LBS / 63 FT LBS) (40 / 100 % DUTY CYCLE)
TOOL MAGAZINE, CHAIN VERT., 60 POCKETS TOOL MAGAZINE VERTICAL CHAIN MAGAZINE BASIC WITH 60 MAGAZINE POCKETS
SPINDLE TAPER HSK-A 63 SPINDLE TAPER FOR HSK-A 63 TO DIN 69893 (INCL. ADAPTATION WORKING SPINDLE AND STANDARD MAGAZINE)
3D QUICKSET EXTENSION PACKAGE 3D QUICKSET EXTENSION PACKAGE FOR EACH FURTHER MACHINE: SOFTWARE / PASSWORD
INFRARED MEASURING PROBE RENISHAW INFRARED MEASURING PROBE TYPE RENISHAW OMP 60
TOOL MEASURING IN MACHINING AREA BLUM LASER TOOL MEASURING IN MACHINING AREA TYPE BLUM LASER TOOL LENGTH AND TOOL DIAMETER MEASURING VERTICAL
SENSORPAKET I4.0 SENSOR PACKAGE I4.0: MPC MACHINE PROTECTION CONTROL SGS SPINDLE GROWTH SENSOR ICS FLOW SENSOR
COOLANT RING JET COOLAND RING JET FOR VERTICAL HEADSTOCK, 15 WATER JETS, 5 AIR JETS
ROTATING CLEAR-VIEW WINDOW ROTATING CLEAR-VIEW WINDOW CABIN DOOR
PROD. PACKAGE 80 BAR, 980 L, FREQUENCY CONTROLLED PRODUCTION PACKAGE: SCRAPER FLIGHT CONVEYOR WITH COOLANT UNIT 980 L / 259 GALLON, PAPER BAND FILTER DISCHARGE HEIGHT: 950 MM WIDTH: 970 MM INTERNAL COOLANT SUPPLY FREQUENCY CONTROLLED 10 BAR/37L/MIN - 80 BAR/31 L/MIN THROUGH SPINDLE CENTRE (AD) STEPLESS
COOLANT TEMPERING/INTERNAL COOLANT SUPPLY COOLANT TEMPERING FOR INTERNAL COOLANT UNIT 980 LT / 259 GALLON HEATING CAPACITY MAX.: 3,000 W / 4 HP COOLING CAPACITY MAX.: 3,800 W / 5.1 HP
SPRAY PISTOL WITH PUMP SPRAY PISTOL WITH PUMP 2 BAR/40 L/MIN 29 PSI/10.4 GALLON/MIN (THEORETICAL PUMP PERFORMANCE)
COOLING COOLING BY AIR BLAST THROUGH SPINDLE CENTRE, SELECTION WITH M FUNCTION
OPERATION MODE 4 OPERATION MODE 4 PROCESS MONITORING IN THE PRODUCTION MANUAL INTERVENTION WITH OPEN DOORS OF MACHINING AREA RELEASE AFTER COMPLETED CHECK LIST
APPLICATION TUNING CYCLE ATC APPLICATION TUNING CYCLE ATC PROGRAMMABLE FEED PARAMETER SELECTION FOR MACHINING TASK: ACCURACY/SURFACE/SPEED
DMG MORI MESSENGER DMG MORI MESSENGER INSTALLATION KIT FOR THE CONNECTION OF ONE MACHINE.
DMG MORI NETSERVICE - CLIENT DMG MORI NETSERVICE - CLIENT QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS WILL BE INSTALLED ON AN EXTERNAL PC!
SPECIAL EQUIPMENT - CELOS FOR HEIDENHAIN TNC640 - PROTIME WORKPIECE REMAINING TIME - PAINT COVER SWITCH CABINET COOLERS IN MACHINE COLOR - VERSION MODE 4 WITHOUT SMARTKEY BA 4 DESELECT MODE 4 VIA MACHINE CONSTANTS! - CYCLE INTERPOLATION TURNING - ADAPTATION OF ELECT
SPECIAL EQUIPMENT - SCREWS ON CALCITWEIS: ZINC COATET SCREWS - SCREWS ON TITANGRAU: BLACK SCREWS - ROW AREA TIDY - NO ADVERTISING FROM OTHER COMPANY
SPECIAL EQUIPMENT - FEED DRIVES X-/Y-AXIS WITH LIQUID COOLING - RECIRCULATING BALLSCREW SPINDLE Y-/Z-AXIS WITH LIQUID COOLING
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-very good condition
-year of production 1997

technical parameters:

-cutting length 3800 mm
-cutting width 2500 mm

-main engine 2 x 4 kw
-motor scoring 2 x 1.1 kw
-track adjustment engine 2 kw

-disc diameter 350 mm
-diameter scoring 120 mm

-diameter 2 x 130 mm
-cutting height adjustment

overall dimensions of the machine:

-length: 420 cm
width 140 cm
-height 120 cm

-weight ~ 800 kg -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION -YEAR OF PRODUCTION 1997 TECHNICAL PARAMETERS: -CUTTING LENGTH 3800 MM -CUTTING WIDTH 2500 MM -MAIN ENGINE 2 X 4 KW -MOTOR SCORING 2 X 1.1 KW -TRACK ADJUSTMENT ENGINE 2 KW -DISC DIAMETER 350 MM -DIAMETER SCORING 120 MM -DIAMETER 2 X 130 MM -CUTTING HEIGHT ADJUSTMENT OVERALL DIMENSIONS OF THE MACHINE: -LENGTH: 420 CM WIDTH 140 CM -HEIGHT 120 CM -WEIGHT ~ 800 KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación:
general
universal machining centre in monoblock construction; control: 3d-control heidenhain tnc 640
technical data
feed rate longitudinal/transverse/vertical 40000/40000/40000 mm/min
rapid traverse longitudinal/transverse/vertical 40/40/40 m/min
working area 1
longitudinal 1335 mm
cross 1250 mm
vertical 900 mm
tool changer
tool changer plane vertical
type of gripper double gripper
number of tools 60


nc swivel rotary table tandem drive nc swivel rotary table tandem drive table plate c-axis: d 1,250 x 1,000 mm / 49.2 x 39.4 in integrated in rigid table 1,400 mm x 1,000 mm 1x t-slot 14 h7 (alignment groove, table centre) 14 x t-slot 14 h12 (clamping grooves) permissible load: 2,600 kg ta
tool magazine, chain vert., 60 pockets tool magazine vertical chain magazine basic with 60 tool pockets hsk-a 100
motor spindle 12,000 rpm 52kw 430nm motor spindle hsk-a 100 spindle speed 20 - 12,000 min-1 output 52 kw / 42 kw (70 hp / 56 hp) torque 430 nm / 300 nm (317 ft lbs / 221 ft lbs) (40 / 100 % duty cycle)
spindle taper hsk-a 100 spindle taper for hsk-a 100 to din 69893 (incl. adaptation working spindle and tool magazine)
3d quickset extension package 3d quickset extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
infrared measuring probe heidenhain infrared measuring probe type heidenhain ts 649 hsk-a 100
tool measuring in machining area blum laser tool measuring in machining area type blum laser tool length and tool diameter measuring vertical
mpc machine protection control mpc machine protection control machine protection by quick shutdown
coolant ring jet coolant ring jet for vertical headstock, 15 water jets, 5 air jets
coolant tempering coolant tempering for internal coolant unit 600 lt / 160 gallon: increased tank 980 lt / 259 gallon heating capacity max.: 3,000 w / 4 hp cooling capacity max.: 3,800 w / 5.1 hp
production package 40 bar/23 l/min, 600 l tank production package: scraper flight conveyor with coolant unit 600 l / 160 gallon, paper band filter discharge height: 950 mm / 37.4 in width: 1,170 mm / 46 in internal coolant supply 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre (ad) (theo
rotating clear-view window rotating clear-view window cabin door
spray pistol with pump spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
cooling cooling by air blast through spindle centre, selection with m function
grid platform grid platforms for easier access to machining area
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area release after completed check list
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
active chatter control acc active chatter control acc improved surface quality combined with reduced machining time, increased tool lifetime
special equipment - feed drives x-/y-axis with liquid cooling - recirculating ballscrew spindle y-/z-axis with liquid cooling
special equipment - screws on calcitweis: zinc coatet screws - screws on titangrau: black screws - row area tidy - no advertising from other company
dmg mori messenger dmg mori messenger installation kit for the connection of one machine.
dmg mori netservice - client dmg mori netservice - client qualified support by internet-based remote diagnostics will be installed on an external pc!
special equipment control heidenhain tnc 640 with celos protime remaining run indicator mode 4 without smart-key painting control cabinet cooling unit in machine color
.gif" alt="Land-

general
universal machining centre in monoblock construction; control: 3d-control heidenhain tnc 640
technical data
feed rate longitudinal/transverse/vertical 40000/40000/40000 mm/min
rapid traverse longitudinal/transverse/vertical 40/40/40 m/min
working area 1
longitudinal 1335 mm
cross 1250 mm
vertical 900 mm
tool changer
tool changer plane vertical
type of gripper double gripper
number of tools 60


nc swivel rotary table tandem drive nc swivel rotary table tandem drive table plate c-axis: d 1,250 x 1,000 mm / 49.2 x 39.4 in integrated in rigid table 1,400 mm x 1,000 mm 1x t-slot 14 h7 (alignment groove, table centre) 14 x t-slot 14 h12 (clamping grooves) permissible load: 2,600 kg ta
tool magazine, chain vert., 60 pockets tool magazine vertical chain magazine basic with 60 tool pockets hsk-a 100
motor spindle 12,000 rpm 52kw 430nm motor spindle hsk-a 100 spindle speed 20 - 12,000 min-1 output 52 kw / 42 kw (70 hp / 56 hp) torque 430 nm / 300 nm (317 ft lbs / 221 ft lbs) (40 / 100 % duty cycle)
spindle taper hsk-a 100 spindle taper for hsk-a 100 to din 69893 (incl. adaptation working spindle and tool magazine)
3d quickset extension package 3d quickset extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
infrared measuring probe heidenhain infrared measuring probe type heidenhain ts 649 hsk-a 100
tool measuring in machining area blum laser tool measuring in machining area type blum laser tool length and tool diameter measuring vertical
mpc machine protection control mpc machine protection control machine protection by quick shutdown
coolant ring jet coolant ring jet for vertical headstock, 15 water jets, 5 air jets
coolant tempering coolant tempering for internal coolant unit 600 lt / 160 gallon: increased tank 980 lt / 259 gallon heating capacity max.: 3,000 w / 4 hp cooling capacity max.: 3,800 w / 5.1 hp
production package 40 bar/23 l/min, 600 l tank production package: scraper flight conveyor with coolant unit 600 l / 160 gallon, paper band filter discharge height: 950 mm / 37.4 in width: 1,170 mm / 46 in internal coolant supply 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre (ad) (theo
rotating clear-view window rotating clear-view window cabin door
spray pistol with pump spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
cooling cooling by air blast through spindle centre, selection with m function
grid platform grid platforms for easier access to machining area
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area release after completed check list
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
active chatter control acc active chatter control acc improved surface quality combined with reduced machining time, increased tool lifetime
special equipment - feed drives x-/y-axis with liquid cooling - recirculating ballscrew spindle y-/z-axis with liquid cooling
special equipment - screws on calcitweis: zinc coatet screws - screws on titangrau: black screws - row area tidy - no advertising from other company
dmg mori messenger dmg mori messenger installation kit for the connection of one machine.
dmg mori netservice - client dmg mori netservice - client qualified support by internet-based remote diagnostics will be installed on an external pc!
special equipment control heidenhain tnc 640 with celos protime remaining run indicator mode 4 without smart-key painting control cabinet cooling unit in machine color
" style="height: 18px;">

GENERAL
UNIVERSAL MACHINING CENTRE IN MONOBLOCK CONSTRUCTION; CONTROL: 3D-CONTROL HEIDENHAIN TNC 640
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 40000/40000/40000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 40/40/40 M/MIN
WORKING AREA 1
LONGITUDINAL 1335 MM
CROSS 1250 MM
VERTICAL 900 MM
TOOL CHANGER
TOOL CHANGER PLANE VERTICAL
TYPE OF GRIPPER DOUBLE GRIPPER
NUMBER OF TOOLS 60


NC SWIVEL ROTARY TABLE TANDEM DRIVE NC SWIVEL ROTARY TABLE TANDEM DRIVE TABLE PLATE C-AXIS: D 1,250 X 1,000 MM / 49.2 X 39.4 IN INTEGRATED IN RIGID TABLE 1,400 MM X 1,000 MM 1X T-SLOT 14 H7 (ALIGNMENT GROOVE, TABLE CENTRE) 14 X T-SLOT 14 H12 (CLAMPING GROOVES) PERMISSIBLE LOAD: 2,600 KG TA
TOOL MAGAZINE, CHAIN VERT., 60 POCKETS TOOL MAGAZINE VERTICAL CHAIN MAGAZINE BASIC WITH 60 TOOL POCKETS HSK-A 100
MOTOR SPINDLE 12,000 RPM 52KW 430NM MOTOR SPINDLE HSK-A 100 SPINDLE SPEED 20 - 12,000 MIN-1 OUTPUT 52 KW / 42 KW (70 HP / 56 HP) TORQUE 430 NM / 300 NM (317 FT LBS / 221 FT LBS) (40 / 100 % DUTY CYCLE)
SPINDLE TAPER HSK-A 100 SPINDLE TAPER FOR HSK-A 100 TO DIN 69893 (INCL. ADAPTATION WORKING SPINDLE AND TOOL MAGAZINE)
3D QUICKSET EXTENSION PACKAGE 3D QUICKSET EXTENSION PACKAGE FOR EACH FURTHER MACHINE: SOFTWARE / PASSWORD (ONLY TOGETHER WITH OPTION MEASURING PROBE AND EXISTING SET OF MEASURING TOOLS)
INFRARED MEASURING PROBE HEIDENHAIN INFRARED MEASURING PROBE TYPE HEIDENHAIN TS 649 HSK-A 100
TOOL MEASURING IN MACHINING AREA BLUM LASER TOOL MEASURING IN MACHINING AREA TYPE BLUM LASER TOOL LENGTH AND TOOL DIAMETER MEASURING VERTICAL
MPC MACHINE PROTECTION CONTROL MPC MACHINE PROTECTION CONTROL MACHINE PROTECTION BY QUICK SHUTDOWN
COOLANT RING JET COOLANT RING JET FOR VERTICAL HEADSTOCK, 15 WATER JETS, 5 AIR JETS
COOLANT TEMPERING COOLANT TEMPERING FOR INTERNAL COOLANT UNIT 600 LT / 160 GALLON: INCREASED TANK 980 LT / 259 GALLON HEATING CAPACITY MAX.: 3,000 W / 4 HP COOLING CAPACITY MAX.: 3,800 W / 5.1 HP
PRODUCTION PACKAGE 40 BAR/23 L/MIN, 600 L TANK PRODUCTION PACKAGE: SCRAPER FLIGHT CONVEYOR WITH COOLANT UNIT 600 L / 160 GALLON, PAPER BAND FILTER DISCHARGE HEIGHT: 950 MM / 37.4 IN WIDTH: 1,170 MM / 46 IN INTERNAL COOLANT SUPPLY 40 BAR/23 L/MIN / 580 PSI/6 GALLON/MIN THROUGH SPINDLE CENTRE (AD) (THEO
ROTATING CLEAR-VIEW WINDOW ROTATING CLEAR-VIEW WINDOW CABIN DOOR
SPRAY PISTOL WITH PUMP SPRAY PISTOL WITH PUMP 2 BAR/40 L/MIN 29 PSI/10.4 GALLON/MIN (THEORETICAL PUMP PERFORMANCE)
COOLING COOLING BY AIR BLAST THROUGH SPINDLE CENTRE, SELECTION WITH M FUNCTION
GRID PLATFORM GRID PLATFORMS FOR EASIER ACCESS TO MACHINING AREA
OPERATION MODE 4 OPERATION MODE 4 PROCESS MONITORING IN THE PRODUCTION MANUAL INTERVENTION WITH OPEN DOORS OF MACHINING AREA RELEASE AFTER COMPLETED CHECK LIST
APPLICATION TUNING CYCLE ATC APPLICATION TUNING CYCLE ATC PROGRAMMABLE FEED PARAMETER SELECTION FOR MACHINING TASK: ACCURACY/SURFACE/SPEED
ACTIVE CHATTER CONTROL ACC ACTIVE CHATTER CONTROL ACC IMPROVED SURFACE QUALITY COMBINED WITH REDUCED MACHINING TIME, INCREASED TOOL LIFETIME
SPECIAL EQUIPMENT - FEED DRIVES X-/Y-AXIS WITH LIQUID COOLING - RECIRCULATING BALLSCREW SPINDLE Y-/Z-AXIS WITH LIQUID COOLING
SPECIAL EQUIPMENT - SCREWS ON CALCITWEIS: ZINC COATET SCREWS - SCREWS ON TITANGRAU: BLACK SCREWS - ROW AREA TIDY - NO ADVERTISING FROM OTHER COMPANY
DMG MORI MESSENGER DMG MORI MESSENGER INSTALLATION KIT FOR THE CONNECTION OF ONE MACHINE.
DMG MORI NETSERVICE - CLIENT DMG MORI NETSERVICE - CLIENT QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS WILL BE INSTALLED ON AN EXTERNAL PC!
SPECIAL EQUIPMENT CONTROL HEIDENHAIN TNC 640 WITH CELOS PROTIME REMAINING RUN INDICATOR MODE 4 WITHOUT SMART-KEY PAINTING CONTROL CABINET COOLING UNIT IN MACHINE COLOR
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-hydraulic presses rema

-machine in stock
-after reviewing the technical
-very good condition

technical parameters:

-bonding length 3500 mm
-the amount of bonding 2500 mm
-the thickness of the glue 100 mm

-three top hydraulic clamps
-side hydraulic pressure
-the pump motor 2.2 kw

-width adjustment
-height adjustment
-three auxiliary support

overall dimensions of the machine:
-length 460 cm
-width 120 cm
-height of 330 cm
-weight of ~ 1500 kg

HYDRAULIC PRESSES REMA -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION TECHNICAL PARAMETERS: -BONDING LENGTH 3500 MM -THE AMOUNT OF BONDING 2500 MM -THE THICKNESS OF THE GLUE 100 MM -THREE TOP HYDRAULIC CLAMPS -SIDE HYDRAULIC PRESSURE -THE PUMP MOTOR 2.2 KW -WIDTH ADJUSTMENT -HEIGHT ADJUSTMENT -THREE AUXILIARY SUPPORT OVERALL DIMENSIONS OF THE MACHINE: -LENGTH 460 CM -WIDTH 120 CM -HEIGHT OF 330 CM -WEIGHT OF ~ 1500 KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación:
general
universal milling machine; control: 3d-control heidenhain tnc 640
working area 1
longitudinal 650 mm
cross 520 mm
vertical 475 mm
technical data
feed rate longitudinal/transverse/vertical -42000/-42000/-42000 mm/min
rapid traverse longitudinal/transverse/vertical 42/42/42 m/min
floor space/weight
dimensions (l x w x h) 2,85 x 2,35 x 2,75 m
weight approx. 7500 kg


toolchanger with set up station for tool loading type of magazine chain
type of gripper double gripper
number of tools 60
max. tool weight 8 kg
max. tool length 300 mm
max. tool diameter with occupied adjacent pockets 80 mm
max. tool dia. with free neighbouring pockets 130 mm
direct measuring system direct path measuring system
spindle speed 20.000 rpm motor spindle speedmaster® hsk-a63 spindle speed 20 - 20,000 min-1 output 35 kw / 25 kw (47 hp / 33 hp) torque 130 nm / 86 nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
nc swivel rotary table swivel rotary table for simultaneous machining clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for b- and c-axis and working plane transformation
tool magazine 60 pockets tool magazine 60 places hsk-a63 vertical chain with double gripper incl. set up station for tool loading
swarf conveyor swarf conveyor, scraper type (differently from standard)
internal coolant supply 40bar/600l internal coolant supply (ics) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. cabin roof, rotary joint in spindle, (defferently from standard)
air blast through spindle centre air blast through spindle centre activated by m function, maintained air with low oil rate
rotating clear-view window rotating clear-view window (only available with option cabin roof)
coolant-air blast change-over coolant - air-blast changeover external switchable via m-function
chip flushing for working area chip flushing for working area rinsing line on the right side panel, backside of machine bed, cabin left and right activated or deactivate by m function´s (only in combination with internal coolant supply, not with 20 bar ics)
oil- and emulsion mist separator mechanical oil- and emulsion mist separator mechanical (only available with option cabin roof)
infrared measuring probe ts649 dmg infrared touch probe make heidenhain ts 649 dmg
laser tool measuring laser tool measuring, fix mounted at machine column tool lenght and diameter measuring automatically cleaning through external airblast calibration tool with taper
3d quick set 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
door drive for working area door door drive for working area door electrical door drive, open / close - activated by two-hand-operation at the control panel safety sensor technology for prevention of accidents remark: not usable for automation!
dmg mori interface profibus dmg mori interface profibus loading door at right machine side profibus communication between robot and machine for loading cycle 2 channel safety circuits only in combination with an additional clamping method option!.
signal lamp 4-colour signal lamp 4 colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
safety package for power failure (incl. ipc) safety package for power failure: package for power failure ipc celos (for proper shutdown of ipc); overload limiter, undervoltage monitoring with fast deceleration control
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
special equipment - hydraulic clamping, 2 clamping circuits - wake up, warm up
.gif" alt="Land-

general
universal milling machine; control: 3d-control heidenhain tnc 640
working area 1
longitudinal 650 mm
cross 520 mm
vertical 475 mm
technical data
feed rate longitudinal/transverse/vertical -42000/-42000/-42000 mm/min
rapid traverse longitudinal/transverse/vertical 42/42/42 m/min
floor space/weight
dimensions (l x w x h) 2,85 x 2,35 x 2,75 m
weight approx. 7500 kg


toolchanger with set up station for tool loading type of magazine chain
type of gripper double gripper
number of tools 60
max. tool weight 8 kg
max. tool length 300 mm
max. tool diameter with occupied adjacent pockets 80 mm
max. tool dia. with free neighbouring pockets 130 mm
direct measuring system direct path measuring system
spindle speed 20.000 rpm motor spindle speedmaster® hsk-a63 spindle speed 20 - 20,000 min-1 output 35 kw / 25 kw (47 hp / 33 hp) torque 130 nm / 86 nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
nc swivel rotary table swivel rotary table for simultaneous machining clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for b- and c-axis and working plane transformation
tool magazine 60 pockets tool magazine 60 places hsk-a63 vertical chain with double gripper incl. set up station for tool loading
swarf conveyor swarf conveyor, scraper type (differently from standard)
internal coolant supply 40bar/600l internal coolant supply (ics) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. cabin roof, rotary joint in spindle, (defferently from standard)
air blast through spindle centre air blast through spindle centre activated by m function, maintained air with low oil rate
rotating clear-view window rotating clear-view window (only available with option cabin roof)
coolant-air blast change-over coolant - air-blast changeover external switchable via m-function
chip flushing for working area chip flushing for working area rinsing line on the right side panel, backside of machine bed, cabin left and right activated or deactivate by m function´s (only in combination with internal coolant supply, not with 20 bar ics)
oil- and emulsion mist separator mechanical oil- and emulsion mist separator mechanical (only available with option cabin roof)
infrared measuring probe ts649 dmg infrared touch probe make heidenhain ts 649 dmg
laser tool measuring laser tool measuring, fix mounted at machine column tool lenght and diameter measuring automatically cleaning through external airblast calibration tool with taper
3d quick set 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
door drive for working area door door drive for working area door electrical door drive, open / close - activated by two-hand-operation at the control panel safety sensor technology for prevention of accidents remark: not usable for automation!
dmg mori interface profibus dmg mori interface profibus loading door at right machine side profibus communication between robot and machine for loading cycle 2 channel safety circuits only in combination with an additional clamping method option!.
signal lamp 4-colour signal lamp 4 colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
safety package for power failure (incl. ipc) safety package for power failure: package for power failure ipc celos (for proper shutdown of ipc); overload limiter, undervoltage monitoring with fast deceleration control
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
special equipment - hydraulic clamping, 2 clamping circuits - wake up, warm up
" style="height: 18px;">

GENERAL
UNIVERSAL MILLING MACHINE; CONTROL: 3D-CONTROL HEIDENHAIN TNC 640
WORKING AREA 1
LONGITUDINAL 650 MM
CROSS 520 MM
VERTICAL 475 MM
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL -42000/-42000/-42000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 42/42/42 M/MIN
FLOOR SPACE/WEIGHT
DIMENSIONS (L X W X H) 2,85 X 2,35 X 2,75 M
WEIGHT APPROX. 7500 KG


TOOLCHANGER WITH SET UP STATION FOR TOOL LOADING TYPE OF MAGAZINE CHAIN
TYPE OF GRIPPER DOUBLE GRIPPER
NUMBER OF TOOLS 60
MAX. TOOL WEIGHT 8 KG
MAX. TOOL LENGTH 300 MM
MAX. TOOL DIAMETER WITH OCCUPIED ADJACENT POCKETS 80 MM
MAX. TOOL DIA. WITH FREE NEIGHBOURING POCKETS 130 MM
DIRECT MEASURING SYSTEM DIRECT PATH MEASURING SYSTEM
SPINDLE SPEED 20.000 RPM MOTOR SPINDLE SPEEDMASTER® HSK-A63 SPINDLE SPEED 20 - 20,000 MIN-1 OUTPUT 35 KW / 25 KW (47 HP / 33 HP) TORQUE 130 NM / 86 NM (96 FT LBS / 63 FT LBS) (40 / 100 % DUTY CYCLE)
NC SWIVEL ROTARY TABLE SWIVEL ROTARY TABLE FOR SIMULTANEOUS MACHINING CLAMPING SURFACE DIA. 630 X 500MM / 24.8 X 19.6 IN SWIVEL RANGE -35 TO +110°, ROTARY AXIS 360° INCLUDING DIRECT MEASURING SYSTEM FOR B- AND C-AXIS AND WORKING PLANE TRANSFORMATION
TOOL MAGAZINE 60 POCKETS TOOL MAGAZINE 60 PLACES HSK-A63 VERTICAL CHAIN WITH DOUBLE GRIPPER INCL. SET UP STATION FOR TOOL LOADING
SWARF CONVEYOR SWARF CONVEYOR, SCRAPER TYPE (DIFFERENTLY FROM STANDARD)
INTERNAL COOLANT SUPPLY 40BAR/600L INTERNAL COOLANT SUPPLY (ICS) WITH PAPER TYPE FILTER, 40 BAR/23 L/MIN / 600-L TANK 580 PSI/6 GALLON/MIN /160 GALLON INCL. CABIN ROOF, ROTARY JOINT IN SPINDLE, (DEFFERENTLY FROM STANDARD)
AIR BLAST THROUGH SPINDLE CENTRE AIR BLAST THROUGH SPINDLE CENTRE ACTIVATED BY M FUNCTION, MAINTAINED AIR WITH LOW OIL RATE
ROTATING CLEAR-VIEW WINDOW ROTATING CLEAR-VIEW WINDOW (ONLY AVAILABLE WITH OPTION CABIN ROOF)
COOLANT-AIR BLAST CHANGE-OVER COOLANT - AIR-BLAST CHANGEOVER EXTERNAL SWITCHABLE VIA M-FUNCTION
CHIP FLUSHING FOR WORKING AREA CHIP FLUSHING FOR WORKING AREA RINSING LINE ON THE RIGHT SIDE PANEL, BACKSIDE OF MACHINE BED, CABIN LEFT AND RIGHT ACTIVATED OR DEACTIVATE BY M FUNCTION´S (ONLY IN COMBINATION WITH INTERNAL COOLANT SUPPLY, NOT WITH 20 BAR ICS)
OIL- AND EMULSION MIST SEPARATOR MECHANICAL OIL- AND EMULSION MIST SEPARATOR MECHANICAL (ONLY AVAILABLE WITH OPTION CABIN ROOF)
INFRARED MEASURING PROBE TS649 DMG INFRARED TOUCH PROBE MAKE HEIDENHAIN TS 649 DMG
LASER TOOL MEASURING LASER TOOL MEASURING, FIX MOUNTED AT MACHINE COLUMN TOOL LENGHT AND DIAMETER MEASURING AUTOMATICALLY CLEANING THROUGH EXTERNAL AIRBLAST CALIBRATION TOOL WITH TAPER
3D QUICK SET 3D QUICKSET TOOL KIT FOR CONTROL AND COMPENSATION OF THE CINEMATIC ACCURACY OF 5 AXIS MACHINE CONFIGURATIONS (ONLY WITH OPTION TOUCH PROBE)
DOOR DRIVE FOR WORKING AREA DOOR DOOR DRIVE FOR WORKING AREA DOOR ELECTRICAL DOOR DRIVE, OPEN / CLOSE - ACTIVATED BY TWO-HAND-OPERATION AT THE CONTROL PANEL SAFETY SENSOR TECHNOLOGY FOR PREVENTION OF ACCIDENTS REMARK: NOT USABLE FOR AUTOMATION!
DMG MORI INTERFACE PROFIBUS DMG MORI INTERFACE PROFIBUS LOADING DOOR AT RIGHT MACHINE SIDE PROFIBUS COMMUNICATION BETWEEN ROBOT AND MACHINE FOR LOADING CYCLE 2 CHANNEL SAFETY CIRCUITS ONLY IN COMBINATION WITH AN ADDITIONAL CLAMPING METHOD OPTION!.
SIGNAL LAMP 4-COLOUR SIGNAL LAMP 4 COLOUR RED: GENERAL ERROR YELLOW: INTERVENTION NECESSARY GREEN: AUTOMATIC MODE BLUE: SET-UP MODE
OPERATION MODE 4 OPERATION MODE 4 PROCESS MONITORING IN THE PRODUCTION MANUAL INTERVENTION WITH OPEN DOORS OF MACHINING AREA. RELEASE AFTER CHECK LIST HAS BEEN FILLED IN.
SAFETY PACKAGE FOR POWER FAILURE (INCL. IPC) SAFETY PACKAGE FOR POWER FAILURE: PACKAGE FOR POWER FAILURE IPC CELOS (FOR PROPER SHUTDOWN OF IPC); OVERLOAD LIMITER, UNDERVOLTAGE MONITORING WITH FAST DECELERATION CONTROL
NETSERVICE (CELOS) NETSERVICE QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS
SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) OVERVIEW OF ALL MAINTENANCE WORK ON THE MACHINE
MESSENGER (CELOS) MESENGER (CELOS) CLEAR LIVE STATUS OF THE NETWORKED MACHINES
SPECIAL EQUIPMENT - HYDRAULIC CLAMPING, 2 CLAMPING CIRCUITS - WAKE UP, WARM UP
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Precio: 7.800 €
Ubicación: Land-type / type: arburg allrounder 420v-1000-150 / 60-2 k
year / year: 1998 mc no. 172 436
control / controller: specifications / technical specifications
clamping force / clamping force: to 100 / 981 kn
tie bar distance / dist. betw. tiebars: 420 x 420 mm
wz mounting height / mould hight: 250 mm
opening / opening stroke: 500 mm
auger / screw: 30 mm + 15 mm
stroke volume / shot volume: 106 cc + 11 ccm
spec. spritzdr. / injection pressure: 2500 bar
general / general
motor / engine 15 kw
heater / heater: 8,9 kw
hours of operation / operating hours: 78,000 h dimensions / dimensions: 4.3 x 2.3 x 2.1 m weight / weight: 5,0 t
accessories / equipment
teletext / screen text: german / english
user guide / manual: german / english
material hopper / hopper: no / no
core puller / core pulls: air valve / air valve: miscellaneous / other
location / location: camp / on floor
delivery time / delivery time: immediate / immediatly
delivery / delivery terms: free truck / free on truck loading
comments / remarks: as a normal machine without 2 k / can be used as a normal machine without 2 k
note / note: all offers are subject to change - reserved for sale - it apply the terms and conditions it the 2nd hd plastic machine in ug

all offers are subject to change - intermediate sales reserved - the general terms and conditions of the 2nd hd plastic machines ug apply
 TYPE / TYPE: ARBURG ALLROUNDER 420V-1000-150 / 60-2 K YEAR / YEAR: 1998 MC NO. 172 436 CONTROL / CONTROLLER: SPECIFICATIONS / TECHNICAL SPECIFICATIONS CLAMPING FORCE / CLAMPING FORCE: TO 100 / 981 KN TIE BAR DISTANCE / DIST. BETW. TIEBARS: 420 X 420 MM WZ MOUNTING HEIGHT / MOULD HIGHT: 250 MM OPENING / OPENING STROKE: 500 MM AUGER / SCREW: 30 MM + 15 MM STROKE VOLUME / SHOT VOLUME: 106 CC + 11 CCM SPEC. SPRITZDR. / INJECTION PRESSURE: 2500 BAR GENERAL / GENERAL MOTOR / ENGINE 15 KW HEATER / HEATER: 8,9 KW HOURS OF OPERATION / OPERATING HOURS: 78,000 H DIMENSIONS / DIMENSIONS: 4.3 X 2.3 X 2.1 M WEIGHT / WEIGHT: 5,0 T ACCESSORIES / EQUIPMENT TELETEXT / SCREEN TEXT: GERMAN / ENGLISH USER GUIDE / MANUAL: GERMAN / ENGLISH MATERIAL HOPPER / HOPPER: NO / NO CORE PULLER / CORE PULLS: AIR VALVE / AIR VALVE: MISCELLANEOUS / OTHER LOCATION / LOCATION: CAMP / ON FLOOR DELIVERY TIME / DELIVERY TIME: IMMEDIATE / IMMEDIATLY DELIVERY / DELIVERY TERMS: FREE TRUCK / FREE ON TRUCK LOADING COMMENTS / REMARKS: AS A NORMAL MACHINE WITHOUT 2 K / CAN BE USED AS A NORMAL MACHINE WITHOUT 2 K NOTE / NOTE: ALL OFFERS ARE SUBJECT TO CHANGE - RESERVED FOR SALE - IT APPLY THE TERMS AND CONDITIONS IT THE 2ND HD PLASTIC MACHINE IN UG ALL OFFERS ARE SUBJECT TO CHANGE - INTERMEDIATE SALES RESERVED - THE GENERAL TERMS AND CONDITIONS OF THE 2ND HD PLASTIC MACHINES UG APPLY
Vendedor: 2.HD PLASTIK MASCHINEN UG mbH
Año de construcción: usado
Ubicación: Land-amtec horizonpack mini premade pouch filler 30m (3-side, stand-up)<br><br>horizontally working premade pouch packaging machine, suitable for flat pouches, stand-up pouches, doy packs etc. bag detections sensors are checking if the bag is placed right and fully opened. the product infeed chute allows immediate pouch filling after the bag is detected and keeps the sealing area free from contamination at the same time. a special gripper system assures the right bag position during the filling process before the bag is closed and sealed. mitsubishi plc, delta touchscreen, piab vacuum generator, omron pid temperature control, airtac cylinder. - technical specifications: stainless steel version (ss304) | max. speed of the machine in neutral: 30 cycles/minute | bag length: 100-200mm | bag width: 100-300mm | compressed air: 0.5m³/min, 6.5bar | power: 220v, 1.5kw.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC HORIZONPACK MINI PREMADE POUCH FILLER 30M (3-SIDE, STAND-UP)

HORIZONTALLY WORKING PREMADE POUCH PACKAGING MACHINE, SUITABLE FOR FLAT POUCHES, STAND-UP POUCHES, DOY PACKS ETC. BAG DETECTIONS SENSORS ARE CHECKING IF THE BAG IS PLACED RIGHT AND FULLY OPENED. THE PRODUCT INFEED CHUTE ALLOWS IMMEDIATE POUCH FILLING AFTER THE BAG IS DETECTED AND KEEPS THE SEALING AREA FREE FROM CONTAMINATION AT THE SAME TIME. A SPECIAL GRIPPER SYSTEM ASSURES THE RIGHT BAG POSITION DURING THE FILLING PROCESS BEFORE THE BAG IS CLOSED AND SEALED. MITSUBISHI PLC, DELTA TOUCHSCREEN, PIAB VACUUM GENERATOR, OMRON PID TEMPERATURE CONTROL, AIRTAC CYLINDER. - TECHNICAL SPECIFICATIONS: STAINLESS STEEL VERSION (SS304) | MAX. SPEED OF THE MACHINE IN NEUTRAL: 30 CYCLES/MINUTE | BAG LENGTH: 100-200MM | BAG WIDTH: 100-300MM | COMPRESSED AIR: 0.5M³/MIN, 6.5BAR | POWER: 220V, 1.5KW.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: gea finnah
type: 2450.033
yom: 1999, remanufactured in 2012 into an aseptic machine
capacity: adjustable to 25, 30, 32 strockes/min with 24 cups/stroke
cup format: 62,5 gr. and 125 gr.
plc: siemens s7
tray erector: by a+f, 1996
big set of spare parts including a spare punch
optional: miromatic mixing and dosing unit with 8 chambers MANUFACTURER: GEA FINNAH TYPE: 2450.033 YOM: 1999, REMANUFACTURED IN 2012 INTO AN ASEPTIC MACHINE CAPACITY: ADJUSTABLE TO 25, 30, 32 STROCKES/MIN WITH 24 CUPS/STROKE CUP FORMAT: 62,5 GR. AND 125 GR. PLC: SIEMENS S7 TRAY ERECTOR: BY A+F, 1996 BIG SET OF SPARE PARTS INCLUDING A SPARE PUNCH OPTIONAL: MIROMATIC MIXING AND DOSING UNIT WITH 8 CHAMBERS
Vendedor: M&E TRADING WEIDNER e.K.
Año de construcción: usado
Ubicación: Land-amtec horizonpack mini premade pouch filler 15l (3-side, stand-up, with/without zipper)<br><br>horizontally working premade pouch packaging machine, suitable for flat pouches, stand-up pouches, doy packs etc. also with zipper. bag detections sensors are checking if the bag is placed right and fully opened. the product infeed chute allows immediate pouch filling after the bag is detected and keeps the sealing area free from contamination at the same time. a special gripper system assures the right bag position during the filling process before the bag is closed and sealed. mitsubishi plc, delta touchscreen, piab vacuum generator, omron pid temperature control, airtac cylinder. - technical specifications: stainless steel version (ss304) | max. speed of the machine in neutral: 15 cycles/minute | bag length: 100-430mm | bag width: 100-300mm | compressed air: 0.5m³/min, 6.5bar | power: 220v, 1.5kw.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC HORIZONPACK MINI PREMADE POUCH FILLER 15L (3-SIDE, STAND-UP, WITH/WITHOUT ZIPPER)

HORIZONTALLY WORKING PREMADE POUCH PACKAGING MACHINE, SUITABLE FOR FLAT POUCHES, STAND-UP POUCHES, DOY PACKS ETC. ALSO WITH ZIPPER. BAG DETECTIONS SENSORS ARE CHECKING IF THE BAG IS PLACED RIGHT AND FULLY OPENED. THE PRODUCT INFEED CHUTE ALLOWS IMMEDIATE POUCH FILLING AFTER THE BAG IS DETECTED AND KEEPS THE SEALING AREA FREE FROM CONTAMINATION AT THE SAME TIME. A SPECIAL GRIPPER SYSTEM ASSURES THE RIGHT BAG POSITION DURING THE FILLING PROCESS BEFORE THE BAG IS CLOSED AND SEALED. MITSUBISHI PLC, DELTA TOUCHSCREEN, PIAB VACUUM GENERATOR, OMRON PID TEMPERATURE CONTROL, AIRTAC CYLINDER. - TECHNICAL SPECIFICATIONS: STAINLESS STEEL VERSION (SS304) | MAX. SPEED OF THE MACHINE IN NEUTRAL: 15 CYCLES/MINUTE | BAG LENGTH: 100-430MM | BAG WIDTH: 100-300MM | COMPRESSED AIR: 0.5M³/MIN, 6.5BAR | POWER: 220V, 1.5KW.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-kba 162-4
year 2001 - straight  machine
ir dryer eltosch- colortronic
varidamp dampening
electromechanic double-sheet control
sheet decurler-all washers
automatic plate change-steel plate on feeder and delivery
antistatic-weko ap 260 powder spray
ink refrigeration-cip 3-
price : on request 

press is in print-shop and is imediately available 
please do not hesitate to contact us for any further information you may need and meanwhile we remain with  KBA 162-4 YEAR 2001 - STRAIGHT MACHINE IR DRYER ELTOSCH- COLORTRONIC VARIDAMP DAMPENING ELECTROMECHANIC DOUBLE-SHEET CONTROL SHEET DECURLER-ALL WASHERS AUTOMATIC PLATE CHANGE-STEEL PLATE ON FEEDER AND DELIVERY ANTISTATIC-WEKO AP 260 POWDER SPRAY INK REFRIGERATION-CIP 3- PRICE : ON REQUEST PRESS IS IN PRINT-SHOP AND IS IMEDIATELY AVAILABLE PLEASE DO NOT HESITATE TO CONTACT US FOR ANY FURTHER INFORMATION YOU MAY NEED AND MEANWHILE WE REMAIN WITH
Vendedor: BALANCEGRAPH GMBH
Año de construcción: usado
Ubicación: Land-amtec horizonpack mini premade pouch filler 15m (3-side, stand-up, with/without zipper)<br><br>horizontally working premade pouch packaging machine, suitable for flat pouches, stand-up pouches, doy packs etc. also with zipper. bag detections sensors are checking if the bag is placed right and fully opened. the product infeed chute allows immediate pouch filling after the bag is detected and keeps the sealing area free from contamination at the same time. a special gripper system assures the right bag position during the filling process before the bag is closed and sealed. mitsubishi plc, delta touchscreen, piab vacuum generator, omron pid temperature control, airtac cylinder. - technical specifications: stainless steel version (ss304) | max. speed of the machine in neutral: 15 cycles/minute | bag length: 100-300mm | bag width: 100-300mm | compressed air: 0.5m³/min, 6.5bar | power: 220v, 1.5kw.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC HORIZONPACK MINI PREMADE POUCH FILLER 15M (3-SIDE, STAND-UP, WITH/WITHOUT ZIPPER)

HORIZONTALLY WORKING PREMADE POUCH PACKAGING MACHINE, SUITABLE FOR FLAT POUCHES, STAND-UP POUCHES, DOY PACKS ETC. ALSO WITH ZIPPER. BAG DETECTIONS SENSORS ARE CHECKING IF THE BAG IS PLACED RIGHT AND FULLY OPENED. THE PRODUCT INFEED CHUTE ALLOWS IMMEDIATE POUCH FILLING AFTER THE BAG IS DETECTED AND KEEPS THE SEALING AREA FREE FROM CONTAMINATION AT THE SAME TIME. A SPECIAL GRIPPER SYSTEM ASSURES THE RIGHT BAG POSITION DURING THE FILLING PROCESS BEFORE THE BAG IS CLOSED AND SEALED. MITSUBISHI PLC, DELTA TOUCHSCREEN, PIAB VACUUM GENERATOR, OMRON PID TEMPERATURE CONTROL, AIRTAC CYLINDER. - TECHNICAL SPECIFICATIONS: STAINLESS STEEL VERSION (SS304) | MAX. SPEED OF THE MACHINE IN NEUTRAL: 15 CYCLES/MINUTE | BAG LENGTH: 100-300MM | BAG WIDTH: 100-300MM | COMPRESSED AIR: 0.5M³/MIN, 6.5BAR | POWER: 220V, 1.5KW.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 14.500 €
Ubicación: Land-4 pockets
2 knifes
stahl ri-55 round pile feeder
sak 56 delivery
tremat feeder
 4 POCKETS 2 KNIFES STAHL RI-55 ROUND PILE FEEDER SAK 56 DELIVERY TREMAT FEEDER
Vendedor: 4print
Año de construcción: usado
Ubicación: Land-amtec flowwrap f200-gd multipack guiding pro-version<br><br>flowwrapping machine, especially to pack multipacks of normal or irregular shaped, dry products (also round or cylindric shapes). including collection unit to collect the incoming products to multi pack units. infeed table with automatic conveyor to bring the product to the packaging machine. including special device to hold single products together for multi packs. additional device in the sealing area running simultaniously with the product to keep single parts together. precise and reliable function by using servo motors. film feed from top. automatic wrapping and sealing below the product. - technical specifications: 220v, 3,66kw | no compressed air required | max. speed of the machine in neutral: 200 cycles/min | max. product sizes: (mm) l(100-400)xw(10-40 or 40-80 or 80-150)xh(10-30 or 30-60) | maschine dimensions ca. (mm): l5000xw965xh1750 | weight (net/gross): 1000/1150kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F200-GD MULTIPACK GUIDING PRO-VERSION

FLOWWRAPPING MACHINE, ESPECIALLY TO PACK MULTIPACKS OF NORMAL OR IRREGULAR SHAPED, DRY PRODUCTS (ALSO ROUND OR CYLINDRIC SHAPES). INCLUDING COLLECTION UNIT TO COLLECT THE INCOMING PRODUCTS TO MULTI PACK UNITS. INFEED TABLE WITH AUTOMATIC CONVEYOR TO BRING THE PRODUCT TO THE PACKAGING MACHINE. INCLUDING SPECIAL DEVICE TO HOLD SINGLE PRODUCTS TOGETHER FOR MULTI PACKS. ADDITIONAL DEVICE IN THE SEALING AREA RUNNING SIMULTANIOUSLY WITH THE PRODUCT TO KEEP SINGLE PARTS TOGETHER. PRECISE AND RELIABLE FUNCTION BY USING SERVO MOTORS. FILM FEED FROM TOP. AUTOMATIC WRAPPING AND SEALING BELOW THE PRODUCT. - TECHNICAL SPECIFICATIONS: 220V, 3,66KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 200 CYCLES/MIN | MAX. PRODUCT SIZES: (MM) L(100-400)XW(10-40 OR 40-80 OR 80-150)XH(10-30 OR 30-60) | MASCHINE DIMENSIONS CA. (MM): L5000XW965XH1750 | WEIGHT (NET/GROSS): 1000/1150KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 1.800 €
Ubicación: Land-the device is used to erode broken drills and taps up to about m 20 directly on the drill steel.
thereby, a copper - hollow electrode in the head is clamped.
the hollow electrode has a smaller diameter than the broken tool. in the edm, the core piece of the broken tool is broken down. the cutting loose and can be removed easily. because the electrode comes with the core of the hole not in touch, the thread remains intact. the usual operating drilling emulsion is used as a coolant
power 3.6 kva          
  THE DEVICE IS USED TO ERODE BROKEN DRILLS AND TAPS UP TO ABOUT M 20 DIRECTLY ON THE DRILL STEEL. THEREBY, A COPPER - HOLLOW ELECTRODE IN THE HEAD IS CLAMPED. THE HOLLOW ELECTRODE HAS A SMALLER DIAMETER THAN THE BROKEN TOOL. IN THE EDM, THE CORE PIECE OF THE BROKEN TOOL IS BROKEN DOWN. THE CUTTING LOOSE AND CAN BE REMOVED EASILY. BECAUSE THE ELECTRODE COMES WITH THE CORE OF THE HOLE NOT IN TOUCH, THE THREAD REMAINS INTACT. THE USUAL OPERATING DRILLING EMULSION IS USED AS A COOLANT POWER 3.6 KVA
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-amtec flowwrap f150-3xl80gn - 1 rotary knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 680mm | 1 rotating knife | 220v, 2.8kw | no compressed air required | max. speed of the machine in neutral: 150 cycles/min | max. bag (not product) dimensions (mm): l(100-450)xw(50-250)xh(0-80) | machine dimensions (mm): l3990xw1100xh1520 | weight (net/gross): 1050/1150kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F150-3XL80GN - 1 ROTARY KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 680MM | 1 ROTATING KNIFE | 220V, 2.8KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 150 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(100-450)XW(50-250)XH(0-80) | MACHINE DIMENSIONS (MM): L3990XW1100XH1520 | WEIGHT (NET/GROSS): 1050/1150KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 7.900 €
Ubicación: Land-cnc - control                                              mgc 3
work paths x/y/z                           300 mm / 200 mm / 250 mm 
tool changer with                                              8 positions
maximum table load about                                     180 kg
tank with filter and air conditioner

accessories: tool changer fitted

remarks: workshop, only about 25,000 operating hours 
  CNC - CONTROL MGC 3 WORK PATHS X/Y/Z 300 MM / 200 MM / 250 MM TOOL CHANGER WITH 8 POSITIONS MAXIMUM TABLE LOAD ABOUT 180 KG TANK WITH FILTER AND AIR CONDITIONER ACCESSORIES: TOOL CHANGER FITTED REMARKS: WORKSHOP, ONLY ABOUT 25,000 OPERATING HOURS
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-amtec flowwrap f150-2xl80gn - 1 rotary knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 480mm | 1 rotating knife | 220v, 2.8kw | no compressed air required | max. speed of the machine in neutral: 150 cycles/min | max. bag (not product) dimensions (mm): l(100-450)xw(50-210)xh(0-80) | machine dimensions (mm): l3990xw900xh1468 | weight (net/gross): 900/950kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F150-2XL80GN - 1 ROTARY KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 480MM | 1 ROTATING KNIFE | 220V, 2.8KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 150 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(100-450)XW(50-210)XH(0-80) | MACHINE DIMENSIONS (MM): L3990XW900XH1468 | WEIGHT (NET/GROSS): 900/950KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-production machine-rema

technical parameters:

-the diameter of the circular saw blades Ø 350 mm
-saw height 25-200 mm
-track width 420 mm
-electrically adjustable cutting height

-min. thickness 8 mm strips-ready
-min. length of sawnwood material 800 mm
-the power of the main engine 45 + 45 kw

-spindle speed 3300 rpm.
-the diameter of the spindle 2 x Ø 80 mm
-feeding speed (stepless) 2.5-25 m/min
-the width of the conveyor 300 mm

-the feed drive motor power 3 kw
-indexing roller drive motor power 2 x 0.75 kw
-five latches anti casting

-thread diameter suction hose for upper Ø 190 mm
-thread diameter suction nozzle of the lower Ø 190 mm

-intake air (dust removal) 3400m3/h
-intake air (dust collector bottom) 3400m3/h

-height to the table surface 850 mm
-machine weight 5500 kg

overall dimensions:
-length: 280 cm
width 230 cm
-height 230 cm -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -PRODUCTION MACHINE-REMA TECHNICAL PARAMETERS: -THE DIAMETER OF THE CIRCULAR SAW BLADES Ø 350 MM -SAW HEIGHT 25-200 MM -TRACK WIDTH 420 MM -ELECTRICALLY ADJUSTABLE CUTTING HEIGHT -MIN. THICKNESS 8 MM STRIPS-READY -MIN. LENGTH OF SAWNWOOD MATERIAL 800 MM -THE POWER OF THE MAIN ENGINE 45 + 45 KW -SPINDLE SPEED 3300 RPM. -THE DIAMETER OF THE SPINDLE 2 X Ø 80 MM -FEEDING SPEED (STEPLESS) 2.5-25 M/MIN -THE WIDTH OF THE CONVEYOR 300 MM -THE FEED DRIVE MOTOR POWER 3 KW -INDEXING ROLLER DRIVE MOTOR POWER 2 X 0.75 KW -FIVE LATCHES ANTI CASTING -THREAD DIAMETER SUCTION HOSE FOR UPPER Ø 190 MM -THREAD DIAMETER SUCTION NOZZLE OF THE LOWER Ø 190 MM -INTAKE AIR (DUST REMOVAL) 3400M3/H -INTAKE AIR (DUST COLLECTOR BOTTOM) 3400M3/H -HEIGHT TO THE TABLE SURFACE 850 MM -MACHINE WEIGHT 5500 KG OVERALL DIMENSIONS: -LENGTH: 280 CM WIDTH 230 CM -HEIGHT 230 CM
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-amtec flowwrap f40-2xl110gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 600mm | 1 pendular knife | 220v, 3.6kw | no compressed air required | max. speed of the machine in neutral: 40 cycles/min | max. bag (not product) dimensions (mm): l(120-450)xw(50-200)xh(10-110) | machine dimensions (mm): l4380xw970xh1500 | weight (net/gross): 1160/1260kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F40-2XL110GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 600MM | 1 PENDULAR KNIFE | 220V, 3.6KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 40 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(120-450)XW(50-200)XH(10-110) | MACHINE DIMENSIONS (MM): L4380XW970XH1500 | WEIGHT (NET/GROSS): 1160/1260KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-stable base frame both axles motor measurement or program input on the control panel, and floppy drive to the acquisition of optimization programs, powered with integrated control cabinet and blower, side locking of the table top in working position, auto-check system with german operation, hydraulic tilting table, air cushion to the movement of the glass plate, breaking bars (2 x cross, 1 x length), automatically retractable glass edition, separate 0 stop, double zero stop for laminated glass cutting,. foot pedal operated breaking bars and air cushion

computer program to optimize rectangular glaszuschnitte and for the control of automatic glass cutting tables including storage management for all table formats, parameter control for cutting speed, trimming cut minimum and maximum size of the remains () recycling) direction-bound and pairwise cut possible, complete with print program for labels and cutting lists

data:

-type: sharp cut 3.7
-serial number: 624/07
-year of construction: 2007
-has almost not working, machine is like new
-with cnc control
-2-axis control
-with glass thickness detection, brushless motors, air cushions and much more.
-maximum glass size: 2600 x 3700 mm
-glass thickness: 3-19 mm
-machine dimensions: 4000 x 2950 x 1300 mm
computer program for cutting optimization
-weight: 1700 kg

price on request STABLE BASE FRAME BOTH AXLES MOTOR MEASUREMENT OR PROGRAM INPUT ON THE CONTROL PANEL, AND FLOPPY DRIVE TO THE ACQUISITION OF OPTIMIZATION PROGRAMS, POWERED WITH INTEGRATED CONTROL CABINET AND BLOWER, SIDE LOCKING OF THE TABLE TOP IN WORKING POSITION, AUTO-CHECK SYSTEM WITH GERMAN OPERATION, HYDRAULIC TILTING TABLE, AIR CUSHION TO THE MOVEMENT OF THE GLASS PLATE, BREAKING BARS (2 X CROSS, 1 X LENGTH), AUTOMATICALLY RETRACTABLE GLASS EDITION, SEPARATE 0 STOP, DOUBLE ZERO STOP FOR LAMINATED GLASS CUTTING,. FOOT PEDAL OPERATED BREAKING BARS AND AIR CUSHION COMPUTER PROGRAM TO OPTIMIZE RECTANGULAR GLASZUSCHNITTE AND FOR THE CONTROL OF AUTOMATIC GLASS CUTTING TABLES INCLUDING STORAGE MANAGEMENT FOR ALL TABLE FORMATS, PARAMETER CONTROL FOR CUTTING SPEED, TRIMMING CUT MINIMUM AND MAXIMUM SIZE OF THE REMAINS () RECYCLING) DIRECTION-BOUND AND PAIRWISE CUT POSSIBLE, COMPLETE WITH PRINT PROGRAM FOR LABELS AND CUTTING LISTS DATA: -TYPE: SHARP CUT 3.7 -SERIAL NUMBER: 624/07 -YEAR OF CONSTRUCTION: 2007 -HAS ALMOST NOT WORKING, MACHINE IS LIKE NEW -WITH CNC CONTROL -2-AXIS CONTROL -WITH GLASS THICKNESS DETECTION, BRUSHLESS MOTORS, AIR CUSHIONS AND MUCH MORE. -MAXIMUM GLASS SIZE: 2600 X 3700 MM -GLASS THICKNESS: 3-19 MM -MACHINE DIMENSIONS: 4000 X 2950 X 1300 MM COMPUTER PROGRAM FOR CUTTING OPTIMIZATION -WEIGHT: 1700 KG PRICE ON REQUEST
Vendedor: Mirrotech Glas & Spiegel GmbH
Año de construcción: usado
Ubicación: Land-amtec flowwrap f80-2xl80gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 600mm | 1 pendular knife | 220v, 3.6kw | no compressed air required | max. speed of the machine in neutral: 80 cycles/min | max. bag (not product) dimensions (mm): l(120-450)xw(50-200)xh(10-80) | machine dimensions (mm): l4380xw970xh1500 | weight (net/gross): 1160/1260kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F80-2XL80GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 600MM | 1 PENDULAR KNIFE | 220V, 3.6KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 80 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(120-450)XW(50-200)XH(10-80) | MACHINE DIMENSIONS (MM): L4380XW970XH1500 | WEIGHT (NET/GROSS): 1160/1260KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 904983
number: 1 pcs.
manufacturer: emag
type: vl 3
control: fanuc 21i-t
year of construction: 2002 (2019)
condition: remanufactured engine

description

turning

maximum swing over bed cover 210 mm
maximum chuck diameter 170 mm
max speed main spindle 1/min 7500
maximum performance main spindle in ed 10-40 / 100% 25/16 kw
maximum torque of main spindle in ed 10-40 / 100% 134/85 nm
spindle diameter in front bearing spindle 80 mm
spindle flange size main spindle gr. 5 (din 55026)
the main spindle unit of x/z axes
travel in x/y/z main spindle unit 400 /-/ 200 mm
maximum rapid traverse in x/y/z main spindle unit 60 /-/ 30 m / min
feed force in the x/y/z main spindle unit 5000 /-/ 5000 n
direct measuring system main spindle unit x/z
full cylinder on the main spindle
gun down
number of stations of which powered 12/0
tool holder in the vdi 40 turret

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
oil / emulsion mist extraction system
hinged belt chip conveyor
chip conveyor discharge height 1250 mm
rinse the pick-up device
coolant system 80 l/min at 7 bar
rotating part memory band
maximum workpiece diameter (27 pieces with 30-85 mm or 18 pieces with 30-130 mm) mm
max workpiece length 100 mm
automatic central oil lubrication

accessories

1 stk. 3 - jaw chuck (new)

general technical data

operating voltage 400/50 v / hz
total power consumption 28 kva
machine dimensions (lxwxh) approx. 2500 x 1900 x 2300 mm
floor space of throughout the facility lxwxh) approx. 3600 x 1900 x 2300 mm
machine weight 5500 kg

comment

the overhaul of the machine was completed in the february 2019 and includes the following activities:
-new linear bearings including ball circulation shoes in x - and z-axis
-new ball screws including stock in x - and z-axis
-new glass standards in x - and z-axis
-new bearings, seals, and measurement system in the turret
-new spindle and new stator windings (main spindle)
-new hydraulic valves, pipes and pump
-new coolant pump
-new pneumatic lines and valves
-new pipes and valves in centralized lubrication
-new 3 - jaw chuck
-new wiring
-new livery
-etc. (several more new parts)

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904983 NUMBER: 1 PCS. MANUFACTURER: EMAG TYPE: VL 3 CONTROL: FANUC 21I-T YEAR OF CONSTRUCTION: 2002 (2019) CONDITION: REMANUFACTURED ENGINE DESCRIPTION TURNING MAXIMUM SWING OVER BED COVER 210 MM MAXIMUM CHUCK DIAMETER 170 MM MAX SPEED MAIN SPINDLE 1/MIN 7500 MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 25/16 KW MAXIMUM TORQUE OF MAIN SPINDLE IN ED 10-40 / 100% 134/85 NM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 80 MM SPINDLE FLANGE SIZE MAIN SPINDLE GR. 5 (DIN 55026) THE MAIN SPINDLE UNIT OF X/Z AXES TRAVEL IN X/Y/Z MAIN SPINDLE UNIT 400 /-/ 200 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z MAIN SPINDLE UNIT 60 /-/ 30 M / MIN FEED FORCE IN THE X/Y/Z MAIN SPINDLE UNIT 5000 /-/ 5000 N DIRECT MEASURING SYSTEM MAIN SPINDLE UNIT X/Z FULL CYLINDER ON THE MAIN SPINDLE GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 12/0 TOOL HOLDER IN THE VDI 40 TURRET MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM HINGED BELT CHIP CONVEYOR CHIP CONVEYOR DISCHARGE HEIGHT 1250 MM RINSE THE PICK-UP DEVICE COOLANT SYSTEM 80 L/MIN AT 7 BAR ROTATING PART MEMORY BAND MAXIMUM WORKPIECE DIAMETER (27 PIECES WITH 30-85 MM OR 18 PIECES WITH 30-130 MM) MM MAX WORKPIECE LENGTH 100 MM AUTOMATIC CENTRAL OIL LUBRICATION ACCESSORIES 1 STK. 3 - JAW CHUCK (NEW) GENERAL TECHNICAL DATA OPERATING VOLTAGE 400/50 V / HZ TOTAL POWER CONSUMPTION 28 KVA MACHINE DIMENSIONS (LXWXH) APPROX. 2500 X 1900 X 2300 MM FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 3600 X 1900 X 2300 MM MACHINE WEIGHT 5500 KG COMMENT THE OVERHAUL OF THE MACHINE WAS COMPLETED IN THE FEBRUARY 2019 AND INCLUDES THE FOLLOWING ACTIVITIES: -NEW LINEAR BEARINGS INCLUDING BALL CIRCULATION SHOES IN X - AND Z-AXIS -NEW BALL SCREWS INCLUDING STOCK IN X - AND Z-AXIS -NEW GLASS STANDARDS IN X - AND Z-AXIS -NEW BEARINGS, SEALS, AND MEASUREMENT SYSTEM IN THE TURRET -NEW SPINDLE AND NEW STATOR WINDINGS (MAIN SPINDLE) -NEW HYDRAULIC VALVES, PIPES AND PUMP -NEW COOLANT PUMP -NEW PNEUMATIC LINES AND VALVES -NEW PIPES AND VALVES IN CENTRALIZED LUBRICATION -NEW 3 - JAW CHUCK -NEW WIRING -NEW LIVERY -ETC. (SEVERAL MORE NEW PARTS) WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-amtec flowwrap f80-xl80gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 450mm | 1 pendular knife | 220v, 3.2kw | no compressed air required | max. speed of the machine in neutral: 80 cycles/min | max. bag (not product): dimensions (mm): l(120-450)xw(50-160)xh(10-80) | machine dimensions (mm): l4380xw870xh1500 | weight (net/gross): 960/1060kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F80-XL80GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 450MM | 1 PENDULAR KNIFE | 220V, 3.2KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 80 CYCLES/MIN | MAX. BAG (NOT PRODUCT): DIMENSIONS (MM): L(120-450)XW(50-160)XH(10-80) | MACHINE DIMENSIONS (MM): L4380XW870XH1500 | WEIGHT (NET/GROSS): 960/1060KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-single screw repelletizing line 
screw diameter:	70 mm
output capacity: 200 kg/h

 SINGLE SCREW REPELLETIZING LINE SCREW DIAMETER: 70 MM OUTPUT CAPACITY: 200 KG/H
Vendedor: MachinePoint
Año de construcción: usado
Ubicación: Land-amtec flowwrap f120-l60bp - 1 pendular knife - bottom film feed<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, medium/larger products. infeed table with automatic transport through pushers into the machine. film supply from the bottom for product with low stability, with humidity or some stickiness (to be tested/confirmed). automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 350mm | 1 pendular knife | 220v, 2.4kw | no compressed air required | max. speed of the machine in neutral: 120 cycles/min | max. bag (not product) dimensions (mm): l(110-330)xw(30-130)xh(10-60) | machine dimensions (mm): l3670xw820xh1410 | weight (net/gross): 800/850kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F120-L60BP - 1 PENDULAR KNIFE - BOTTOM FILM FEED

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, MEDIUM/LARGER PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. FILM SUPPLY FROM THE BOTTOM FOR PRODUCT WITH LOW STABILITY, WITH HUMIDITY OR SOME STICKINESS (TO BE TESTED/CONFIRMED). AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 350MM | 1 PENDULAR KNIFE | 220V, 2.4KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 120 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(110-330)XW(30-130)XH(10-60) | MACHINE DIMENSIONS (MM): L3670XW820XH1410 | WEIGHT (NET/GROSS): 800/850KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-year of construction: approx. 1991
schleifscheibendurchm.: 400 mm
wheel width: 65 mm
speed: 1450 rpm
total power consumption: 1.9 kw / 400 v
machine weight: 200 kg

equipment / accessories:

machine base

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the doppelschleifbock advance under power.
 YEAR OF CONSTRUCTION: APPROX. 1991 SCHLEIFSCHEIBENDURCHM.: 400 MM WHEEL WIDTH: 65 MM SPEED: 1450 RPM TOTAL POWER CONSUMPTION: 1.9 KW / 400 V MACHINE WEIGHT: 200 KG EQUIPMENT / ACCESSORIES: MACHINE BASE ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE DOPPELSCHLEIFBOCK ADVANCE UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-amtec flowwrap f120-l60gp - 1 pendular knife - guiding device<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 350mm | 1 pendular knife | 220v, 2.4kw | no compressed air required | max. speed of the machine in neutral: 120 cycles/min | max. bag (not product) dimensions (mm): l(110-330)xw(30-130)xh(10-60) | machine dimensions (mm): l3670xw820xh1410 | weight (net/gross): 800/850kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F120-L60GP - 1 PENDULAR KNIFE - GUIDING DEVICE

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 350MM | 1 PENDULAR KNIFE | 220V, 2.4KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 120 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(110-330)XW(30-130)XH(10-60) | MACHINE DIMENSIONS (MM): L3670XW820XH1410 | WEIGHT (NET/GROSS): 800/850KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-type of machine: double grinder bench.
producers: rema.
model: ds 4/4,.
year: approx. 1990.
condition: very good,.
type of offer: used machine,
    ,.	
technical data:.
drive type: el / mech.,.
grinding discs: Ø 400 x 65 mm,
speed: 1450 rpm,.
drive: 1.9 kw.
note: with substructure,.
weight: 150 kg.
     ,.
the machine is in a very good shape and ready for operation. it can be visited and demonstrated at our location.,.
     ,.
we will be pleased if you take an interest in our offer.,.
  TYPE OF MACHINE: DOUBLE GRINDER BENCH. PRODUCERS: REMA. MODEL: DS 4/4,. YEAR: APPROX. 1990. CONDITION: VERY GOOD,. TYPE OF OFFER: USED MACHINE, ,. TECHNICAL DATA:. DRIVE TYPE: EL / MECH.,. GRINDING DISCS: Ø 400 X 65 MM, SPEED: 1450 RPM,. DRIVE: 1.9 KW. NOTE: WITH SUBSTRUCTURE,. WEIGHT: 150 KG. ,. THE MACHINE IS IN A VERY GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION.,. ,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER.,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-amtec flowwrap f230-m40b - 2 rotary knives - bottom film feed<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, small products. infeed table with automatic transport through pushers into the machine. film supply from the bottom for product with low stability, with humidity or some stickiness (to be tested/confirmed). automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 250mm | 2 rotating knives | 220v, 2.4kw | no compressed air required | max. speed of the machine in neutral: 230 cycles/min | max. bag (not product) dimensions (mm): l((65-190)or(120-280))xw(30-110)xh(0-40) | machine dimensions (mm): l3920xw670xh1320 | weight (net/gross): 700/750kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F230-M40B - 2 ROTARY KNIVES - BOTTOM FILM FEED

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, SMALL PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. FILM SUPPLY FROM THE BOTTOM FOR PRODUCT WITH LOW STABILITY, WITH HUMIDITY OR SOME STICKINESS (TO BE TESTED/CONFIRMED). AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 250MM | 2 ROTATING KNIVES | 220V, 2.4KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 230 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L((65-190)OR(120-280))XW(30-110)XH(0-40) | MACHINE DIMENSIONS (MM): L3920XW670XH1320 | WEIGHT (NET/GROSS): 700/750KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-folding machine (32 pages)
stahl
model	td78/442+k
year	2000
working width	780 mm
feeder	flat pile feeder + tremat separation head
buckles	4+4+2 buckles + vfz52 mobile knife
delivery	lega 55 upright+pressing stacker
details	first section 780 mm, second second 660 mm, third section 560 mm, knife section 520 mm
available	direct FOLDING MACHINE (32 PAGES) STAHL MODEL TD78/442+K YEAR 2000 WORKING WIDTH 780 MM FEEDER FLAT PILE FEEDER + TREMAT SEPARATION HEAD BUCKLES 4+4+2 BUCKLES + VFZ52 MOBILE KNIFE DELIVERY LEGA 55 UPRIGHT+PRESSING STACKER DETAILS FIRST SECTION 780 MM, SECOND SECOND 660 MM, THIRD SECTION 560 MM, KNIFE SECTION 520 MM AVAILABLE DIRECT
Vendedor: ITK Graphic Machinery
Año de construcción: usado
Ubicación: Land-amtec flowwrap f230-l40b - 2 rotary knives - bottom film feed<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, small products. infeed table with automatic transport through pushers into the machine. film supply from the bottom for product with low stability, with humidity or some stickiness (to be tested/confirmed). automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 350mm | 2 rotating knives | 220v, 2.8kw | no compressed air required | max. speed of the machine in neutral: 230 cycles/min | max. bag (not product) dimensions (mm): l((65-190)or(120-280))xw(50-160)xh(0-40) | machine dimensions (mm): l4020xw720xh1320 | weight (net/gross): 800/850kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F230-L40B - 2 ROTARY KNIVES - BOTTOM FILM FEED

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, SMALL PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. FILM SUPPLY FROM THE BOTTOM FOR PRODUCT WITH LOW STABILITY, WITH HUMIDITY OR SOME STICKINESS (TO BE TESTED/CONFIRMED). AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 350MM | 2 ROTATING KNIVES | 220V, 2.8KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 230 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L((65-190)OR(120-280))XW(50-160)XH(0-40) | MACHINE DIMENSIONS (MM): L4020XW720XH1320 | WEIGHT (NET/GROSS): 800/850KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-bobst flexo 1600, 1987
ref.nr: 2634 manufacturer bobst model flexo 1600 year built: 1987 max sheet size: 600 x 1600 mm availability: immediately condition: good price: on technical request spezification: â?¢ flexo section two color units and feeders.
â?¢ feeder is vacuum feed. sheets are stacked and feed inside. the upper feed roll is rubber roll and the bottom is the metal.
â?¢ feeder section is available front stop, side back stop, guides, main engine.
â?¢ the printing module remaine: rubber ink fountain roll, anilox roll / 2 x 100 l/cm / ceramic, coating, printing plate cylinder / stereo, thickness 4, 74 mm.
 BOBST FLEXO 1600, 1987 REF.NR: 2634 MANUFACTURER BOBST MODEL FLEXO 1600 YEAR BUILT: 1987 MAX SHEET SIZE: 600 X 1600 MM AVAILABILITY: IMMEDIATELY CONDITION: GOOD PRICE: ON TECHNICAL REQUEST SPEZIFICATION: &ACIRC;?&CENT; FLEXO SECTION TWO COLOR UNITS AND FEEDERS. &ACIRC;?&CENT; FEEDER IS VACUUM FEED. SHEETS ARE STACKED AND FEED INSIDE. THE UPPER FEED ROLL IS RUBBER ROLL AND THE BOTTOM IS THE METAL. &ACIRC;?&CENT; FEEDER SECTION IS AVAILABLE FRONT STOP, SIDE BACK STOP, GUIDES, MAIN ENGINE. &ACIRC;?&CENT; THE PRINTING MODULE REMAINE: RUBBER INK FOUNTAIN ROLL, ANILOX ROLL / 2 X 100 L/CM / CERAMIC, COATING, PRINTING PLATE CYLINDER / STEREO, THICKNESS 4, 74 MM.
Vendedor: PP LION GMBH
Año de construcción: usado
Ubicación: Land-amtec flowwrap f150-xl75g - 1 rotary knife - guiding device<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 450mm | 1 rotating knife | 220v, 2.8kw | no compressed air required | max. speed of the machine in neutral: 150 cycles/min | max. bag (not product) dimensions (mm): l(130-450)xw(50-180)xh(0-75) | machine dimensions (mm): l4020xw820xh1450 | weight (net/gross): 950/1000kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F150-XL75G - 1 ROTARY KNIFE - GUIDING DEVICE

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 450MM | 1 ROTATING KNIFE | 220V, 2.8KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 150 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(130-450)XW(50-180)XH(0-75) | MACHINE DIMENSIONS (MM): L4020XW820XH1450 | WEIGHT (NET/GROSS): 950/1000KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 890 €
Ubicación: Land-turbocharger 53339707103 rebuilt by the turbocharger specialists TURBOCHARGER 53339707103 REBUILT BY THE TURBOCHARGER SPECIALISTS "SIEKER TURBO". THE TURBOCHARGER WAS REPAIRED WITH ORIGINAL KKK BORGWARNER REPAIR KITS ACCORDING TO MANUFACTURER SPECIFICATIONS. WE HAVE MANY MORE REMAN TURBOCHARGERS FROM OUR STOCK AVAILABLE. WE GLADLY SEND YOU OUR STOCK INVENTORY LIST.
Vendedor: Sieker Turbo
Año de construcción: usado
Ubicación: Land-amtec flowwrap f150-xl65g - 1 rotary knife - guiding device<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 400mm | 1 rotating knife | 220v, 2.8kw | no compressed air required | max. speed of the machine in neutral: 150 cycles/min | max. bag (not product) dimensions (mm): l(150-400)xw(50-180)xh(0-65) | machine dimensions (mm): l4020xw800xh1450 | weight (net/gross): 900/950kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F150-XL65G - 1 ROTARY KNIFE - GUIDING DEVICE

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 400MM | 1 ROTATING KNIFE | 220V, 2.8KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 150 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(150-400)XW(50-180)XH(0-65) | MACHINE DIMENSIONS (MM): L4020XW800XH1450 | WEIGHT (NET/GROSS): 900/950KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 1.750 €
Ubicación: Land-turbocharger 466050-0001 rebuilt by the turbocharger specialists "sieker turbo". the turbocharger was repaired with original garrett repair records according to manufacturer specifications.

we have many more reman turbochargers from our stock available. we gladly send you our stock inventory list.  TURBOCHARGER 466050-0001 REBUILT BY THE TURBOCHARGER SPECIALISTS "SIEKER TURBO". THE TURBOCHARGER WAS REPAIRED WITH ORIGINAL GARRETT REPAIR RECORDS ACCORDING TO MANUFACTURER SPECIFICATIONS. WE HAVE MANY MORE REMAN TURBOCHARGERS FROM OUR STOCK AVAILABLE. WE GLADLY SEND YOU OUR STOCK INVENTORY LIST.
Vendedor: Sieker Turbo
Año de construcción: usado
Ubicación: Land-amtec flowwrap f180-l60g - 2 rotary knives - guiding device<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 350mm | 2 rotating knives | 220v, 2.6kw | no compressed air required | max. speed of the machine in neutral: 180 cycles/min | max. bag (not product) dimensions (mm): l((90-220)or(150-330))xw(50-160)xh(0-60) | machine dimensions (mm): l4020xw770xh1450 | weight (net/gross): 850/900kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F180-L60G - 2 ROTARY KNIVES - GUIDING DEVICE

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 350MM | 2 ROTATING KNIVES | 220V, 2.6KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 180 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L((90-220)OR(150-330))XW(50-160)XH(0-60) | MACHINE DIMENSIONS (MM): L4020XW770XH1450 | WEIGHT (NET/GROSS): 850/900KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 2.250 €
Ubicación: Land-turbocharger 53449707001 rebuilt by the turbocharger specialists "sieker turbo". the turbocharger was repaired with original kkk borgwarner repair kits according to manufacturer specifications.

we have many more reman turbochargers from our stock available. we gladly send you our stock inventory list.   
 TURBOCHARGER 53449707001 REBUILT BY THE TURBOCHARGER SPECIALISTS "SIEKER TURBO". THE TURBOCHARGER WAS REPAIRED WITH ORIGINAL KKK BORGWARNER REPAIR KITS ACCORDING TO MANUFACTURER SPECIFICATIONS. WE HAVE MANY MORE REMAN TURBOCHARGERS FROM OUR STOCK AVAILABLE. WE GLADLY SEND YOU OUR STOCK INVENTORY LIST.
Vendedor: Sieker Turbo
Año de construcción: usado
Ubicación: Land-amtec flowwrap f180-l40g - 2 rotary knives - guiding device<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 350mm | 2 rotating knives | 220v, 2.6kw | no compressed air required | max. speed of the machine in neutral: 180 cycles/min | max. bag (not product) dimensions (mm): l((65-190)or(120-280))xw(50-160)xh(0-40) | machine dimensions (mm): l4020xw770xh1450 | weight (net/gross): 850/900kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F180-L40G - 2 ROTARY KNIVES - GUIDING DEVICE

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 350MM | 2 ROTATING KNIVES | 220V, 2.6KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 180 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L((65-190)OR(120-280))XW(50-160)XH(0-40) | MACHINE DIMENSIONS (MM): L4020XW770XH1450 | WEIGHT (NET/GROSS): 850/900KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 5.600 €
Ubicación: Land-type / type: krauss maffei km 150/900 b2
year / year: 1991 m / c no. 153162
control / controller: mc 3

technical data / technical specifications

clamping force / clamping force: 150 to / 1471 kn
tie bar distance / dist. betw. tiebars: 500mm x 450 mm
wz mounting height / mould hight: 280 mm
opening / opening stroke: 620 mm
auger / screw: 60 mm
stroke volume / shot volume: 622 ccm
spec. spritzdr. / injection pressure: 1440 bar

general / general

motor / engine: 37 kw
heater / heater: 18.8 kw
hours of operation / operating hours: -.
dimensions / dimensions: 6.8 x 2.1 x 2.2 m weight / weight: 8t

accessories / equipment

teletext / screen text: german / english
user guide / manual: german / english
material hopper / hopper: no / no
core puller / core pulls.
air valve / air valve: -.

miscellaneous / other

location / location: germany
delivery time / delivery time: april 2019
delivery / delivery terms: truck free / free on truck
comments / remarks: in running condition

note / note all offers are subject to change - reserved for sale - it apply the terms and conditions it the 2nd hd plastic machine in ug

all offers are subject to change - intermediate sales reserved - the general terms and conditions of the 2nd hd plastic machines ug apply

shipping worldwide!
 TYPE / TYPE: KRAUSS MAFFEI KM 150/900 B2 YEAR / YEAR: 1991 M / C NO. 153162 CONTROL / CONTROLLER: MC 3 TECHNICAL DATA / TECHNICAL SPECIFICATIONS CLAMPING FORCE / CLAMPING FORCE: 150 TO / 1471 KN TIE BAR DISTANCE / DIST. BETW. TIEBARS: 500MM X 450 MM WZ MOUNTING HEIGHT / MOULD HIGHT: 280 MM OPENING / OPENING STROKE: 620 MM AUGER / SCREW: 60 MM STROKE VOLUME / SHOT VOLUME: 622 CCM SPEC. SPRITZDR. / INJECTION PRESSURE: 1440 BAR GENERAL / GENERAL MOTOR / ENGINE: 37 KW HEATER / HEATER: 18.8 KW HOURS OF OPERATION / OPERATING HOURS: -. DIMENSIONS / DIMENSIONS: 6.8 X 2.1 X 2.2 M WEIGHT / WEIGHT: 8T ACCESSORIES / EQUIPMENT TELETEXT / SCREEN TEXT: GERMAN / ENGLISH USER GUIDE / MANUAL: GERMAN / ENGLISH MATERIAL HOPPER / HOPPER: NO / NO CORE PULLER / CORE PULLS. AIR VALVE / AIR VALVE: -. MISCELLANEOUS / OTHER LOCATION / LOCATION: GERMANY DELIVERY TIME / DELIVERY TIME: APRIL 2019 DELIVERY / DELIVERY TERMS: TRUCK FREE / FREE ON TRUCK COMMENTS / REMARKS: IN RUNNING CONDITION NOTE / NOTE ALL OFFERS ARE SUBJECT TO CHANGE - RESERVED FOR SALE - IT APPLY THE TERMS AND CONDITIONS IT THE 2ND HD PLASTIC MACHINE IN UG ALL OFFERS ARE SUBJECT TO CHANGE - INTERMEDIATE SALES RESERVED - THE GENERAL TERMS AND CONDITIONS OF THE 2ND HD PLASTIC MACHINES UG APPLY SHIPPING WORLDWIDE!
Vendedor: 2.HD PLASTIK MASCHINEN UG mbH
Año de construcción: usado
Ubicación: Land-amtec flowwrap f230-m55 - 2 rotary knives<br><br>flowwrap machine for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, small products. infeed table with automatic transport through pushers into the machine. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 250mm | 2 rotating knives | 220v, 2.4kw | no compressed air required | max. speed of the machine in neutral: 230 cycles/min | max. bag (not product) dimensions (mm): l(90-220)xw(30-110)xh(0-55): machine dimensions (mm): l3770xw670xh1450 | weight (net/gross): 700/750kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F230-M55 - 2 ROTARY KNIVES

FLOWWRAP MACHINE FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, SMALL PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 250MM | 2 ROTATING KNIVES | 220V, 2.4KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 230 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(90-220)XW(30-110)XH(0-55): MACHINE DIMENSIONS (MM): L3770XW670XH1450 | WEIGHT (NET/GROSS): 700/750KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)